· 8 years ago · Jul 04, 2018, 12:42 AM
1<6>[ 0.033134] c0 1 early rtb size: 0x100000
2<6>[ 0.033146] c0 1 early rtb phys: 0x83700000
3<6>[ 0.043533] c2 1 DMI not present or invalid.
4<6>[ 0.055895] c2 1 pinctrl core: initialized pinctrl subsystem
5<6>[ 0.056367] c2 1 regulator-dummy: no parameters
6<6>[ 0.163189] c2 1 console [bootmsg-1] enabled
7<6>[ 0.163627] c2 1 NET: Registered protocol family 16
8<6>[ 0.203682] c2 1 console [pstore-1] enabled
9<6>[ 0.203808] c2 1 pstore: Registered ramoops as persistent store backend
10<6>[ 0.203823] c2 1 ramoops: attached 0x100000@0x83500000, ecc: 0/0
11<6>[ 0.205349] c2 1 bootloader_log: allocate buffer for bootloader log, size: 458752
12<6>[ 0.205541] c2 1 bldr_log_parser: size 15157
13<6>[ 0.205614] c2 1 bootloader_log: allocate buffer for last bootloader log, size: 458752
14<6>[ 0.205755] c2 1 bldr_log_parser: size 11331
15<6>[ 0.213454] c3 1 cpuidle: using governor ladder
16<6>[ 0.240078] c3 1 cpuidle: using governor menu
17<6>[ 0.246785] c2 1 cpuidle: using governor qcom
18<6>[ 0.248398] c2 1 vdso: 2 pages (1 code @ ffffffc000f5e000, 1 data @ ffffffc00165c000)
19<6>[ 0.248858] c2 1 software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
20<6>[ 0.249794] c2 1 DMA: preallocated 256 KiB pool for atomic allocations
21<4>[ 0.255703] c2 1 irq: no irq domain found for /soc/qcom,sde_kms@900000 !
22<4>[ 0.255975] c2 1 irq: no irq domain found for /soc/qcom,sde_kms@900000 !
23<4>[ 0.256639] c2 1 irq: no irq domain found for /soc/qcom,sde_kms@900000 !
24<6>[ 0.269797] c2 1 qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
25<6>[ 0.271067] c2 1 sps:sps is ready.
26<3>[ 0.275733] c2 1 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
27<3>[ 0.344703] c2 1 smd_channel_probe_now: allocation table not initialized
28<3>[ 0.345122] c2 1 smd_channel_probe_now: allocation table not initialized
29<3>[ 0.345510] c2 1 smd_channel_probe_now: allocation table not initialized
30<3>[ 0.345903] c2 1 smd_channel_probe_now: allocation table not initialized
31<6>[ 0.346255] c2 1 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
32<6>[ 0.346602] c2 1 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
33<6>[ 0.347613] c2 1 msm_rpm_dev_probe: APSS-RPM communication over GLINK
34<3>[ 0.358836] c2 1 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
35<3>[ 0.360932] c2 1 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
36<6>[ 0.361305] c2 1 PON_PON_REASON:
37<6>[ 0.361320] c2 1 Hard Reset, (0x21)
38<6>[ 0.361332] c2 1 Pon1, (0x21)
39<6>[ 0.361343] c2 1 PON_WARM_RESET_REASON:
40<6>[ 0.361353] c2 1 PON_SOFT_RESET_REASON:
41<6>[ 0.361363] c2 1 PON_POFF_REASON:
42<6>[ 0.361374] c2 1 PS Hold, (0x2)
43<6>[ 0.368089] c2 1 pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
44<6>[ 0.368893] c2 1 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
45<6>[ 0.369267] c2 1 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
46<6>[ 0.370271] c2 1 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
47<6>[ 0.370795] c2 1 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
48<6>[ 0.371854] c1 1 Create monitor tsense workqueue(0xffffffc0f80c2000)...
49<4>[ 0.372208] c1 13 [THERMAL] Cntl_0[0x0DE0FFF9]: (0,42.1),(1,42.7),(2,42.4),(3,44.6),(4,45.3),(5,43.3),(6,42.4),(7,44.3),(8,45.3),(9,45.9),(10,43.7),(11,43.3),(12,44.3)
50<4>[ 0.372226] c1 13 [THERMAL] tsens1_controller doesn't initialize yet
51<6>[ 0.375836] c1 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
52<6>[ 0.375869] c1 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
53<6>[ 0.375896] c1 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
54<6>[ 0.375916] c1 1 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
55<6>[ 0.376078] c1 1 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
56<3>[ 0.376093] c1 1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
57<6>[ 0.376109] c1 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
58<3>[ 0.376124] c1 1 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
59<6>[ 0.383198] c1 1 platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
60<6>[ 0.384038] c1 1 platform soc:qcom,msm-mdsprpc-mem: assigned reserved memory node adsp_region
61<6>[ 0.389890] c2 45 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
62<3>[ 0.390636] c0 4 smd_channel_probe_now: allocation table not initialized
63<6>[ 0.391132] c1 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
64<6>[ 0.391292] c1 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
65<6>[ 0.391595] c1 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
66<6>[ 0.392020] c1 1 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
67<6>[ 0.395098] c1 1 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
68<6>[ 0.395576] c1 1 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
69<6>[ 0.396042] c1 1 apcc_l3_mem_acc_corner: 0 <--> 0 mV
70<6>[ 0.396516] c1 1 gfx_mem_acc_corner: 0 <--> 0 mV
71<6>[ 0.397136] c1 1 kryo0-retention: 468 <--> 892 mV at 520 mV
72<6>[ 0.397432] c1 1 kryo0: 468 <--> 892 mV at 754 mV
73<6>[ 0.397637] c1 1 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
74<6>[ 0.398057] c1 1 kryo1-retention: 468 <--> 892 mV at 520 mV
75<6>[ 0.398330] c1 1 kryo1: 468 <--> 892 mV at 754 mV
76<6>[ 0.398531] c1 1 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
77<6>[ 0.405196] c1 1 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
78<3>[ 0.407370] c1 1 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
79<4>[ 0.434503] c1 1 __of_mpm_init(): MPM driver mapping exists
80<6>[ 0.435571] c1 1 platform 83cf0000.htc_radio_smem: assigned reserved memory node htc_smlog_region@0
81<6>[ 0.436062] c1 1 mnemosyne: init from device tree.
82<6>[ 0.436088] c1 1 mnemosyne size: 0x2000
83<6>[ 0.436100] c1 1 mnemosyne phys: 0x83ce0000
84<3>[ 0.440514] c3 6 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
85<6>[ 0.441462] c3 6 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
86<6>[ 0.442030] c3 6 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
87<6>[ 0.442550] c3 6 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
88<6>[ 0.443122] c3 6 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
89<6>[ 0.443666] c3 6 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
90<6>[ 0.444240] c3 6 pm8994_s3: 1300 mV normal idle
91<6>[ 0.444807] c3 6 pm8994_s4: 1800 mV normal idle
92<6>[ 0.445373] c3 6 pm8994_s5: 2150 mV normal idle
93<6>[ 0.445926] c3 6 pm8994_s7: 800 mV normal idle
94<6>[ 0.446489] c3 6 pm8994_l1: 1000 mV normal idle
95<6>[ 0.447097] c3 6 pm8994_l2: 1250 mV normal idle
96<6>[ 0.447924] c3 6 pm8994_l3: 1200 <--> 1250 mV at 1200 mV normal idle
97<6>[ 0.448496] c3 6 pm8994_l4: 1225 mV normal idle
98<6>[ 0.449064] c3 6 pm8994_l6: 1200 mV normal idle
99<6>[ 0.449621] c3 6 pm8994_l8: 1800 mV normal idle
100<6>[ 0.450222] c3 6 pm8994_l9: 1800 mV normal idle
101<6>[ 0.450795] c3 6 pm8994_l10: 2800 mV normal idle
102<6>[ 0.451353] c3 6 pm8994_l11: 1150 mV normal idle
103<6>[ 0.451925] c3 6 pm8994_l12: 1800 mV normal idle
104<6>[ 0.452869] c3 6 pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
105<6>[ 0.453482] c3 6 pm8994_l14: 1800 mV normal idle
106<6>[ 0.454404] c3 6 pm8994_l15: 1800 mV normal idle
107<6>[ 0.454969] c3 6 pm8994_l16: 2700 mV normal idle
108<6>[ 0.455542] c3 6 pm8994_l17: 2850 mV normal idle
109<6>[ 0.456465] c3 6 pm8994_l18: 1800 <--> 1900 mV at 1800 mV normal idle
110<6>[ 0.457358] c3 6 pm8994_l19: 2850 mV normal idle
111<6>[ 0.458106] c3 6 pm8994_l20: 2950 mV normal idle
112<6>[ 0.458664] c3 6 pm8994_l21: 2950 mV normal idle
113<6>[ 0.459685] c3 6 pm8994_l22: 3300 mV normal idle
114<6>[ 0.460569] c3 6 pm8994_l23: 1800 mV normal idle
115<6>[ 0.461131] c3 6 pm8994_l24: 3075 mV normal idle
116<6>[ 0.461704] c3 6 pm8994_l25: 1200 mV normal idle
117<6>[ 0.462660] c3 6 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
118<6>[ 0.463152] c3 6 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
119<6>[ 0.463757] c3 6 pm8994_l27: 1050 mV normal idle
120<6>[ 0.464325] c3 6 pm8994_l28: 925 mV normal idle
121<6>[ 0.465519] c3 6 pm8994_l29: 3300 mV normal idle
122<6>[ 0.466228] c3 6 pm8994_l30: 1800 mV normal idle
123<6>[ 0.466833] c3 6 pm8994_l32: 1800 mV normal idle
124<6>[ 0.467405] c3 6 pm8994_lvs1: no parameters
125<6>[ 0.467854] c3 6 pm8994_lvs1_ext_ldo_switch: no parameters
126<6>[ 0.469602] c3 6 pm8994_lvs2: no parameters
127<6>[ 0.470161] c3 6 pmi8994_s1: 1025 mV normal idle
128<6>[ 0.470717] c3 6 pmi8994_boost_5v: no parameters
129<3>[ 0.470853] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
130<3>[ 0.470977] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
131<6>[ 0.471363] c3 6 pmi8994_boost_pin_ctrl: no parameters
132<3>[ 0.471430] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
133<3>[ 0.471543] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
134<6>[ 0.471982] c3 6 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
135<6>[ 0.472457] c3 6 pm8994_s11: 470 <--> 1230 mV at 905 mV normal idle
136<6>[ 0.472745] c3 6 pm8994_s11_avs_limit: 470 <--> 1230 mV
137<6>[ 0.472916] c3 6 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
138<6>[ 0.473906] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
139<6>[ 0.473936] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
140<6>[ 0.473952] c3 6 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
141<6>[ 0.473971] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
142<6>[ 0.473991] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
143<6>[ 0.474376] c3 6 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
144<3>[ 0.474392] c3 6 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
145<6>[ 0.474408] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
146<3>[ 0.474422] c3 6 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
147<3>[ 0.475047] c3 6 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
148<3>[ 0.475366] c3 6 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
149<6>[ 0.501757] c1 6 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
150<6>[ 0.502996] c1 6 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
151<6>[ 0.503024] c1 6 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
152<6>[ 0.503041] c1 6 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
153<6>[ 0.503580] c1 6 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
154<6>[ 0.503605] c1 6 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
155<6>[ 0.503621] c1 6 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
156<6>[ 0.504133] c1 6 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
157<6>[ 0.504163] c1 6 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
158<6>[ 0.504177] c1 6 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
159<6>[ 0.517732] c1 6 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
160<6>[ 0.519893] c1 6 pmi8994_boost_5v: no parameters
161<3>[ 0.520128] c1 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
162<3>[ 0.520263] c1 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
163<6>[ 0.520574] c1 6 pmi8994_boost_pin_ctrl: no parameters
164<3>[ 0.520704] c1 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
165<3>[ 0.520819] c1 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
166<6>[ 0.521824] c1 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
167<6>[ 0.521853] c1 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
168<6>[ 0.521868] c1 6 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
169<6>[ 0.521887] c1 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
170<6>[ 0.521907] c1 6 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
171<6>[ 0.522254] c1 6 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
172<3>[ 0.522271] c1 6 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
173<6>[ 0.522289] c1 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
174<3>[ 0.522304] c1 6 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
175<6>[ 0.523132] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
176<6>[ 0.523157] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
177<6>[ 0.523173] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
178<6>[ 0.523188] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
179<6>[ 0.523203] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
180<6>[ 0.523220] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
181<6>[ 0.523693] c1 6 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
182<6>[ 0.523983] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
183<6>[ 0.524000] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV
184<6>[ 0.524013] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 775000 uV
185<6>[ 0.524026] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 900000 uV
186<6>[ 0.524141] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 322
187<6>[ 0.524156] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 464, quot_offset[ 7]= 135
188<6>[ 0.524169] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 692, quot_offset[ 7]= 225
189<6>[ 0.524183] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 926, quot_offset[ 7]= 230
190<6>[ 0.524349] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
191<6>[ 0.524366] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
192<6>[ 0.524381] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
193<6>[ 0.524396] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
194<6>[ 0.524410] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
195<6>[ 0.524429] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
196<6>[ 0.524609] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 585000 uV
197<6>[ 0.524622] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV
198<6>[ 0.524634] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 775000 uV
199<6>[ 0.524646] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 900000 uV
200<6>[ 0.524702] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 322
201<6>[ 0.524716] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 464, quot_offset[ 7]= 135
202<6>[ 0.524729] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 692, quot_offset[ 7]= 225
203<6>[ 0.524742] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 926, quot_offset[ 7]= 230
204<6>[ 0.524872] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
205<6>[ 0.524887] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
206<6>[ 0.524901] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
207<6>[ 0.524915] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
208<6>[ 0.524929] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
209<6>[ 0.524946] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
210<6>[ 0.525361] c1 6 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
211<6>[ 0.525665] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
212<6>[ 0.525680] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 635000 uV
213<6>[ 0.525692] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 705000 uV
214<6>[ 0.525704] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 990000 uV
215<6>[ 0.525838] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 339
216<6>[ 0.525853] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 399, quot_offset[ 7]= 55
217<6>[ 0.525866] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 543, quot_offset[ 7]= 140
218<6>[ 0.525880] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1080, quot_offset[ 7]= 535
219<6>[ 0.526492] c1 6 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
220<6>[ 0.526679] c1 6 apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
221<6>[ 0.527031] c1 6 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
222<6>[ 0.530777] c1 6 cpr3_regulator_measure_aging: apcc: average quotient delta=-12 (count=10)
223<6>[ 0.530841] c1 6 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=625 uV
224<6>[ 0.531440] c1 6 apc1_corner: 0 <--> 0 mV at 0 mV
225<6>[ 0.533749] c1 6 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
226<6>[ 0.533775] c1 6 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
227<6>[ 0.534130] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 630000 uV
228<6>[ 0.534144] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
229<6>[ 0.534157] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 785000 uV
230<6>[ 0.534169] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 875000 uV
231<6>[ 0.534489] c1 6 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
232<6>[ 0.534670] c1 6 gfx_corner: 0 <--> 0 mV at 0 mV
233<6>[ 0.536601] c3 6 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
234<6>[ 0.539523] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu0
235<6>[ 0.539572] c3 6 clock-cpu-8996: set OPP pair (1593600000 Hz, 965000 uv) on cpu0
236<6>[ 0.539599] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu1
237<6>[ 0.539644] c3 6 clock-cpu-8996: set OPP pair (1593600000 Hz, 965000 uv) on cpu1
238<6>[ 0.539670] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu2
239<6>[ 0.539735] c3 6 clock-cpu-8996: set OPP pair (2150400000 Hz, 1065000 uv) on cpu2
240<6>[ 0.539760] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu3
241<6>[ 0.539820] c3 6 clock-cpu-8996: set OPP pair (2150400000 Hz, 1065000 uv) on cpu3
242<6>[ 0.540010] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
243<6>[ 0.540098] c3 6 clock-cpu-8996: set OPP pair (1593600000 Hz, 965000 uv) on soc:qcom,m4m
244<6>[ 0.540579] c3 6 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
245<6>[ 0.541076] c3 6 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
246<6>[ 0.541108] c3 6 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 885000 uV) on b00000.qcom,kgsl-3d0
247<6>[ 0.542930] c3 6 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
248<6>[ 0.543203] c3 6 pmi8994_boost_5v: no parameters
249<3>[ 0.543294] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
250<3>[ 0.543467] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
251<6>[ 0.543738] c3 6 pmi8994_boost_pin_ctrl: no parameters
252<3>[ 0.543807] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
253<3>[ 0.543915] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
254<6>[ 0.544824] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
255<6>[ 0.544851] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
256<6>[ 0.544867] c3 6 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
257<6>[ 0.544887] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
258<6>[ 0.544907] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
259<3>[ 0.545251] c3 6 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
260<3>[ 0.545270] c3 6 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
261<3>[ 0.545286] c3 6 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
262<3>[ 0.545313] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
263<6>[ 0.545896] c3 6 msm_thermal:msm_thermal_init limit temp = 60, core limit temp = 70, hotplug limit temp= 105
264<3>[ 0.546676] c3 21 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
265<3>[ 0.546741] c3 21 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
266<3>[ 0.546759] c3 21 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
267<6>[ 0.546923] c2 6 pmi8994_boost_5v: no parameters
268<3>[ 0.547030] c2 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
269<3>[ 0.547155] c2 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
270<6>[ 0.547447] c2 6 pmi8994_boost_pin_ctrl: no parameters
271<3>[ 0.547516] c2 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
272<3>[ 0.547625] c2 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
273<3>[ 0.608105] c1 1 qpnp_pin_check_constraints: invalid pull value 4 for pin mpp 1
274<3>[ 0.608133] c1 1 qcom,qpnp-pin qpnp-pin-13: _qpnp_pin_config: unable to set default config for pmic pin 1
275<4>[ 0.608252] c1 1 qcom,qpnp-pin: probe of qpnp-pin-13 failed with error -22
276<6>[ 0.612695] c1 1 KPI: Bootloader start count = 33446
277<6>[ 0.612719] c1 1 KPI: Bootloader end count = 269530
278<6>[ 0.612732] c1 1 KPI: Bootloader display count = 62587
279<6>[ 0.612745] c1 1 KPI: Bootloader load kernel count = 8006
280<6>[ 0.612761] c1 1 KPI: Kernel MPM timestamp = 301577
281<6>[ 0.612772] c1 1 KPI: Kernel MPM Clock frequency = 32768
282<6>[ 0.612802] c1 1 socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=1, hw_plat_ver=65536
283<6>[ 0.612802] c1 1 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=953244639 num_pmics=2
284<6>[ 0.613207] c1 1 gdsc_mmagic_bimc: no parameters
285<6>[ 0.614856] c1 1 vgaarb: loaded
286<5>[ 0.616845] c1 1 SCSI subsystem initialized
287<6>[ 0.618566] c1 1 usbcore: registered new interface driver usbfs
288<6>[ 0.618641] c1 1 usbcore: registered new interface driver hub
289<6>[ 0.618811] c1 1 usbcore: registered new device driver usb
290<4>[ 0.619474] c1 1 soc:usb_nop_phy supply vcc not found, using dummy regulator
291<6>[ 0.621570] c1 1 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
292<6>[ 0.621608] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: i2c, val: 12
293<6>[ 0.621627] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
294<6>[ 0.621643] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
295<6>[ 0.621660] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
296<6>[ 0.621675] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
297<6>[ 0.621692] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
298<6>[ 0.621708] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
299<6>[ 0.621724] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
300<6>[ 0.621740] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
301<6>[ 0.621756] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
302<6>[ 0.621774] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
303<6>[ 0.621790] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
304<6>[ 0.621805] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
305<3>[ 0.621956] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
306<6>[ 0.621971] c1 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
307<6>[ 0.622497] c1 1 i2c-msm-v2 75ba000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
308<6>[ 0.624080] c1 1 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
309<6>[ 0.624119] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: i2c, val: 6
310<6>[ 0.624138] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
311<6>[ 0.624154] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
312<6>[ 0.624170] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
313<6>[ 0.624185] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,master-id, val: 86
314<6>[ 0.624200] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
315<6>[ 0.624216] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
316<6>[ 0.624231] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
317<6>[ 0.624247] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
318<6>[ 0.624262] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
319<6>[ 0.624278] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
320<6>[ 0.624293] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
321<6>[ 0.624308] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
322<3>[ 0.624447] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
323<6>[ 0.624462] c1 1 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
324<6>[ 0.624953] c1 1 i2c-msm-v2 757a000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
325<6>[ 0.627742] c1 1 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
326<6>[ 0.627778] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: i2c, val: 7
327<6>[ 0.627795] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
328<6>[ 0.627811] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
329<6>[ 0.627827] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
330<6>[ 0.627841] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
331<6>[ 0.627856] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
332<6>[ 0.627871] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
333<6>[ 0.627886] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
334<6>[ 0.627900] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
335<6>[ 0.627915] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
336<6>[ 0.627931] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
337<6>[ 0.627945] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
338<6>[ 0.627959] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
339<3>[ 0.628102] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
340<6>[ 0.628117] c1 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
341<6>[ 0.628609] c1 1 i2c-msm-v2 75b5000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
342<6>[ 0.629846] c1 1 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
343<6>[ 0.629884] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: i2c, val: 8
344<6>[ 0.629901] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
345<6>[ 0.629916] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
346<6>[ 0.629931] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 1
347<6>[ 0.629945] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
348<6>[ 0.629961] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
349<6>[ 0.629976] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
350<6>[ 0.629991] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
351<6>[ 0.630006] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
352<6>[ 0.630072] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,nack-as-normal, val: 40
353<6>[ 0.630089] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
354<6>[ 0.630104] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
355<6>[ 0.630120] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
356<3>[ 0.630269] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
357<6>[ 0.630284] c1 1 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
358<6>[ 0.630755] c1 1 i2c-msm-v2 75b6000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
359<6>[ 0.633336] c0 1 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
360<6>[ 0.633461] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: i2c, val: 9
361<6>[ 0.633482] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
362<6>[ 0.633498] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
363<6>[ 0.633515] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
364<6>[ 0.633531] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
365<6>[ 0.633547] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
366<6>[ 0.633562] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
367<6>[ 0.633578] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
368<6>[ 0.633593] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
369<6>[ 0.633608] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
370<6>[ 0.633626] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
371<6>[ 0.633642] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
372<6>[ 0.633657] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
373<3>[ 0.633821] c0 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
374<6>[ 0.633836] c0 1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
375<6>[ 0.634349] c0 1 i2c-msm-v2 75b7000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
376<6>[ 0.635946] c0 1 media: Linux media interface: v0.10
377<6>[ 0.636028] c0 1 Linux video capture interface: v2.00
378<6>[ 0.666885] c0 1 cpufreq: driver msm up and running
379<6>[ 0.668176] c0 1 platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
380<6>[ 0.669041] c0 1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
381<6>[ 0.669883] c0 1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
382<6>[ 0.671059] c0 1 ION heap system created
383<6>[ 0.671298] c0 1 ION heap adsp created at 0x00000000ff800000 with size 400000
384<6>[ 0.671327] c0 1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
385<6>[ 0.671353] c0 1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
386<6>[ 0.671377] c0 1 ION heap secure_heap created
387<3>[ 0.672921] c0 1 msm_bus_fabric_init_driver
388<3>[ 0.684145] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
389<3>[ 0.684186] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
390<3>[ 0.692985] c0 1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
391<3>[ 0.694161] c0 1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
392<3>[ 0.705022] c2 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
393<3>[ 0.705063] c2 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
394<3>[ 0.705096] c2 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
395<3>[ 0.705461] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
396<3>[ 0.705522] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
397<3>[ 0.705579] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
398<3>[ 0.705636] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
399<3>[ 0.705691] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
400<3>[ 0.705748] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
401<3>[ 0.705804] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
402<6>[ 0.710601] c2 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
403<6>[ 0.710641] c2 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
404<6>[ 0.710934] c2 1 input: qpnp_pon as /devices/virtual/input/input0
405<6>[ 0.712049] c2 1 pon_spare_reg: no parameters
406<6>[ 0.712203] c2 1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
407<6>[ 0.712300] c2 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
408<6>[ 0.712331] c2 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
409<6>[ 0.712677] c2 1 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
410<6>[ 0.712847] c2 1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
411<3>[ 0.715767] c2 1 ipa ipa2_uc_state_check:296 uC interface not initialized
412<3>[ 0.715803] c2 1 ipa ipa_sps_irq_control_all:942 EP (2) not allocated.
413<3>[ 0.715819] c2 1 ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
414<6>[ 0.718361] c0 1 sps:BAM 0x0000000000684000 is registered.
415<3>[ 0.719365] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
416<6>[ 0.719694] c0 1 sps:BAM 0x0000000000684000 (va:0xffffff8000840000) enabled: ver:0x27, number of pipes:20
417<3>[ 0.722621] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
418<3>[ 0.732873] c3 1 ipa ipa2_uc_state_check:296 uC interface not initialized
419<6>[ 0.736149] c3 1 IPA driver initialization was successful.
420<6>[ 0.737902] c3 1 gdsc_mmagic_video: no parameters
421<6>[ 0.738378] c3 1 gdsc_mmagic_mdss: no parameters
422<6>[ 0.738805] c3 1 gdsc_mmagic_camss: no parameters
423<6>[ 0.739334] c3 1 gdsc_venus: no parameters
424<6>[ 0.739389] c3 1 gdsc_venus: supplied by gdsc_mmagic_video
425<6>[ 0.739839] c3 1 gdsc_venus_core0: fast normal
426<6>[ 0.740342] c3 1 gdsc_venus_core1: fast normal
427<6>[ 0.740788] c3 1 gdsc_camss_top: no parameters
428<6>[ 0.740837] c3 1 gdsc_camss_top: supplied by gdsc_mmagic_camss
429<6>[ 0.741274] c3 1 gdsc_vfe0: no parameters
430<6>[ 0.741322] c3 1 gdsc_vfe0: supplied by gdsc_camss_top
431<6>[ 0.741762] c3 1 gdsc_vfe1: no parameters
432<6>[ 0.741810] c3 1 gdsc_vfe1: supplied by gdsc_camss_top
433<6>[ 0.742246] c3 1 gdsc_mdss: no parameters
434<6>[ 0.742295] c3 1 gdsc_mdss: supplied by gdsc_mmagic_mdss
435<6>[ 0.743006] c3 1 gdsc_jpeg: no parameters
436<6>[ 0.743056] c3 1 gdsc_jpeg: supplied by gdsc_camss_top
437<6>[ 0.743590] c3 1 gdsc_cpp: no parameters
438<6>[ 0.743643] c3 1 gdsc_cpp: supplied by gdsc_camss_top
439<6>[ 0.744045] c3 1 gdsc_pcie_0: no parameters
440<6>[ 0.744412] c3 1 gdsc_pcie_1: no parameters
441<6>[ 0.744766] c3 1 gdsc_pcie_2: no parameters
442<6>[ 0.745132] c3 1 gdsc_usb30: no parameters
443<6>[ 0.745478] c3 1 gdsc_ufs: no parameters
444<6>[ 0.745980] c3 1 gdsc_fd: no parameters
445<6>[ 0.746030] c3 1 gdsc_fd: supplied by gdsc_camss_top
446<6>[ 0.746439] c3 1 gdsc_gpu: no parameters
447<6>[ 0.747607] c3 1 gdsc_gpu_gx: no parameters
448<6>[ 0.748056] c3 1 gdsc_gpu_gx: supplied by gfx_corner
449<6>[ 0.748520] c3 1 gdsc_hlos1_vote_aggre0_noc: no parameters
450<6>[ 0.748880] c3 1 gdsc_hlos1_vote_lpass_adsp: no parameters
451<6>[ 0.749259] c3 1 gdsc_hlos1_vote_lpass_core: no parameters
452<6>[ 0.749649] c3 1 gdsc_aggre0_noc: no parameters
453<6>[ 0.752865] c3 1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
454<6>[ 0.752897] c3 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
455<4>[ 0.752952] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
456<6>[ 0.756207] c3 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
457<6>[ 0.756306] c3 1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
458<6>[ 0.756327] c3 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
459<4>[ 0.756370] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
460<3>[ 0.757582] c3 1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
461<6>[ 0.759030] c3 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
462<6>[ 0.759111] c3 1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
463<3>[ 0.759130] c3 1 mdss_pll_probe: Unable to get the cell-index rc=-22
464<4>[ 0.759170] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
465<4>[ 0.759196] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
466<4>[ 0.759222] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
467<7>[ 0.808667] c3 1 esoc bus registration done
468<6>[ 0.808773] c3 1 Advanced Linux Sound Architecture Driver Initialized.
469<6>[ 0.809533] c3 1 Bluetooth: ffffffc0f9647cf8
470<6>[ 0.809565] c3 1 NET: Registered protocol family 31
471<6>[ 0.809577] c3 1 Bluetooth: ffffffc0f9647cf8
472<6>[ 0.809592] c3 1 Bluetooth: ffffffc0f9647cc8Bluetooth: ffffffc0f9647c98
473<6>[ 0.809644] c3 1 Bluetooth: ffffffc0f9647cb8<6>[ 0.810188] c3 55 cfg80211: Calling CRDA to update world regulatory domain
474<1>[ 0.810538] c3 1 pcie:pcie_init.
475<4>[ 0.814400] c3 1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
476<3>[ 0.817767] c3 1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
477<6>[ 0.821649] c0 6 pmi8994_boost_5v: no parameters
478<6>[ 0.822189] c0 6 pmi8994_boost_5v: supplied by pon_spare_reg
479<6>[ 0.823850] c0 6 pmi8994_boost_pin_ctrl: no parameters
480<6>[ 0.824294] c0 6 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
481<6>[ 0.825899] c0 6 ibb_reg: 4600 <--> 6000 mV at 5000 mV
482<6>[ 0.827307] c0 6 lab_reg: 4600 <--> 6000 mV at 5000 mV
483<6>[ 0.828732] c3 1 Switched to clocksource arch_sys_counter
484<6>[ 0.886558] c3 1 NET: Registered protocol family 2
485<6>[ 0.887506] c3 1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
486<6>[ 0.887622] c3 1 TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
487<6>[ 0.888467] c3 1 TCP: Hash tables configured (established 32768 bind 32768)
488<6>[ 0.888686] c3 1 TCP: reno registered
489<6>[ 0.888757] c3 1 UDP hash table entries: 2048 (order: 5, 196608 bytes)
490<6>[ 0.889022] c3 1 UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
491<6>[ 0.889708] c3 1 NET: Registered protocol family 1
492<7>[ 0.889796] c3 1 PCI: CLS 0 bytes, default 64
493<6>[ 0.890667] c3 1 Trying to unpack rootfs image as initramfs...
494<6>[ 0.947207] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
495<6>[ 0.947254] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
496<6>[ 0.947263] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
497<6>[ 0.947272] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
498<6>[ 0.947281] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
499<6>[ 0.947289] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
500<6>[ 0.947297] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
501<6>[ 0.947304] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
502<6>[ 1.047240] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 960000. Temp:60
503<6>[ 1.047286] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
504<6>[ 1.047295] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 960000. Temp:60
505<6>[ 1.047304] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
506<6>[ 1.047313] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1555200. Temp:60
507<6>[ 1.047322] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
508<6>[ 1.047330] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1555200. Temp:60
509<6>[ 1.047339] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
510<6>[ 1.117661] c3 1 Freeing initrd memory: 8340K
511<6>[ 1.120492] c3 1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
512<6>[ 1.128950] c3 1 futex hash table entries: 1024 (order: 4, 65536 bytes)
513<5>[ 1.129062] c3 1 Initialise system trusted keyring
514<6>[ 1.129166] c3 1 audit: initializing netlink subsys (disabled)
515<5>[ 1.129300] c3 1 audit: type=2000 audit(1.126:1): initialized
516<6>[ 1.140209] c3 1 early rtb deinitialized
517<6>[ 1.140226] c3 1 msm_rtb.size: 0x100000
518<6>[ 1.140335] c3 1 msm_rtb set ok: phys: 0x83700000, size: 0x100000
519<4>[ 1.149187] c3 1 vmscan: error setting kswapd cpu affinity mask
520<5>[ 1.155856] c3 1 VFS: Disk quotas dquot_6.5.2
521<4>[ 1.156026] c3 1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
522<6>[ 1.157800] c3 1 exFAT: Core Version 1.2.19
523<6>[ 1.157821] c3 1 exFAT: FS Version 1.2.19
524<6>[ 1.157929] c3 1 Registering sdcardfs 0.1
525<6>[ 1.158251] c3 1 ntfs: driver 2.1.31 [Flags: R/W].
526<6>[ 1.158473] c3 1 fuse init (API version 7.23)
527<7>[ 1.159126] c3 1 SELinux: Registering netfilter hooks
528<5>[ 1.162963] c3 1 Key type asymmetric registered
529<5>[ 1.162990] c3 1 Asymmetric key parser 'x509' registered
530<6>[ 1.163216] c3 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
531<6>[ 1.163240] c3 1 io scheduler noop registered
532<6>[ 1.163254] c3 1 io scheduler deadline registered
533<6>[ 1.163421] c3 1 io scheduler cfq registered (default)
534<3>[ 1.180626] c3 1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
535<3>[ 1.182580] c3 1 No change in context(0==0), skip
536<6>[ 1.183874] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
537<6>[ 1.183885] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
538<6>[ 1.183894] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
539<6>[ 1.183904] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
540<6>[ 1.183932] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
541<6>[ 1.183941] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
542<6>[ 1.183950] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
543<6>[ 1.183959] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
544<6>[ 1.183981] c3 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
545<6>[ 1.183990] c3 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
546<6>[ 1.184013] c3 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
547<6>[ 1.184022] c3 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
548<3>[ 1.184038] c3 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
549<3>[ 1.184142] c3 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
550<6>[ 1.184682] c3 1 xlog_status: enable:1, panic:1, dump:3
551<3>[ 1.185035] c3 1 OF: no ranges; cannot translate
552<3>[ 1.185057] c3 1 OF: no ranges; cannot translate
553<3>[ 1.185864] c3 1 OF: no ranges; cannot translate
554<3>[ 1.185881] c3 1 OF: no ranges; cannot translate
555<3>[ 1.186104] c3 1 OF: no ranges; cannot translate
556<3>[ 1.186118] c3 1 OF: no ranges; cannot translate
557<3>[ 1.186326] c3 1 OF: no ranges; cannot translate
558<3>[ 1.186340] c3 1 OF: no ranges; cannot translate
559<6>[ 1.186678] c3 1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
560<6>[ 1.193927] c3 1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
561<6>[ 1.194195] c3 1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
562<6>[ 1.194397] c3 1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
563<6>[ 1.194590] c3 1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
564<4>[ 1.196550] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
565<6>[ 1.196575] c3 1 mdss_dsi_get_dt_vreg_data: gdsc min=0, max=0, enable=0, disable=0, ulp_load=0 preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
566<4>[ 1.196602] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
567<6>[ 1.196615] c3 1 mdss_dsi_get_dt_vreg_data: vdda min=1250000, max=1250000, enable=18160, disable=1, ulp_load=1 preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
568<4>[ 1.196631] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
569<6>[ 1.196643] c3 1 mdss_dsi_get_dt_vreg_data: vcca min=925000, max=925000, enable=17000, disable=32, ulp_load=32 preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
570<3>[ 1.196654] c3 1 no supply entry present: htc,panel-supply-entries-stage2
571<6>[ 1.198482] c3 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
572<6>[ 1.198938] c3 1 mdss_dsi_find_panel_of_node: cmdline:0:htc,pme_tianma_hx8396c2_cmd:1:htc,pme_tianma_hx8396c2_cmd:cfg:split_dsi panel_name:htc,pme_tianma_hx8396c2_cmd
573<6>[ 1.198962] c3 1 mdss_dsi_panel_init: Panel Name = Perfume WQHD TIANMA HX8396C2 5.2 Dual dsi cmd mode panel
574<6>[ 1.199087] c3 1 mdss_dsi_panel_timing_from_dt: found new timing "htc,pme_tianma_hx8396c2_cmd" (ffffffc0f9647178)
575<3>[ 1.199110] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-post-on-command
576<3>[ 1.199122] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
577<3>[ 1.199133] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
578<4>[ 1.199142] c3 1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
579<6>[ 1.199162] c3 1 mdss_dsi_parse_topology_config: cfg_node name config2 lm_split:0x0 pp_split:yes
580<3>[ 1.199260] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
581<3>[ 1.199272] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
582<6>[ 1.199293] c3 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
583<6>[ 1.199305] c3 1 mdss_dsi_parse_panel_features: ulps feature disabled
584<6>[ 1.199316] c3 1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
585<6>[ 1.199326] c3 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
586<4>[ 1.199347] c3 1 mdss_dsi_parse_esd_params: ESD_TE_V2 (te_signal_check_v2) method was deprecated, fallback to ESD_TE
587<3>[ 1.199364] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
588<3>[ 1.199375] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
589<6>[ 1.199401] c3 1 htc_mdss_dsi_parse_brt_bl_table: read htc,brt-bl-table success, brt_bl_table_size=3
590<3>[ 1.199498] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,color-temp26-cmds
591<3>[ 1.199533] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-on-fixup-command
592<6>[ 1.199544] c3 1 mdss_panel_parse_dt: Power Control Type=1
593<6>[ 1.199557] c3 1 mdss_dsi_parse_calibration_gain: Not support panel calibration
594<6>[ 1.199579] c3 1 mdss_panel_parse_bl_settings: 0000000000000000, 0000000000000000
595<4>[ 1.199606] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
596<6>[ 1.199621] c3 1 mdss_dsi_get_dt_vreg_data: vddio min=1800000, max=1800000, enable=62000, disable=80, ulp_load=80 preonsleep=0, postonsleep=1, preoffsleep=20, postoffsleep=200
597<4>[ 1.199635] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
598<6>[ 1.199648] c3 1 mdss_dsi_get_dt_vreg_data: lab min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=5, preoffsleep=0, postoffsleep=0
599<4>[ 1.199662] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
600<6>[ 1.199674] c3 1 mdss_dsi_get_dt_vreg_data: ibb min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=1, preoffsleep=5, postoffsleep=1
601<3>[ 1.199903] c3 1 no supply entry present: htc,panel-supply-entries-stage2
602<3>[ 1.200003] c3 1 mdss_dsi_parse_ctrl_params:4413 Unable to read qcom,display-id, data=0000000000000000,len=20
603<6>[ 1.200169] c3 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
604<3>[ 1.200209] c3 1 mdss_dsi_parse_gpio_params:4467, extra reset gpio not specified
605<3>[ 1.200324] c3 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
606<3>[ 1.200349] c3 1 mdss_dsi_retrieve_ctrl_resources+0x16c/0x254->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
607<6>[ 1.200360] c3 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001902000 ctrl_size=400 phy_base=ffffff8001904400 phy_size=588
608<6>[ 1.200582] c3 1 dsi_panel_device_register: Continuous splash enabled
609<6>[ 1.201335] c3 1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
610<6>[ 1.201897] c3 1 platform 900000.qcom,mdss_mdp:qcom,mdss_fb_primary: assigned reserved memory node cont_splash_mem@83401000
611<6>[ 1.202396] c3 1 mdss_dsi_panel_power_on_hx8396c2: ctrl0 ext-vdd_en=0
612<6>[ 1.203736] c3 1 mdss_dsi_panel_power_ctrl_ext: cur_power_state=1 req_power_state=1
613<6>[ 1.204463] c3 1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
614<6>[ 1.205396] c3 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
615<6>[ 1.205850] c3 1 mdss_dsi_find_panel_of_node: cmdline:0:htc,pme_tianma_hx8396c2_cmd:1:htc,pme_tianma_hx8396c2_cmd:cfg:split_dsi panel_name:htc,pme_tianma_hx8396c2_cmd
616<6>[ 1.205872] c3 1 mdss_dsi_panel_init: Panel Name = Perfume WQHD TIANMA HX8396C2 5.2 Dual dsi cmd mode panel
617<6>[ 1.205991] c3 1 mdss_dsi_panel_timing_from_dt: found new timing "htc,pme_tianma_hx8396c2_cmd" (ffffffc0f9647178)
618<3>[ 1.206014] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-post-on-command
619<3>[ 1.206026] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
620<3>[ 1.206037] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
621<6>[ 1.206059] c3 1 mdss_dsi_parse_topology_config: cfg_node name config2 lm_split:0x0 pp_split:yes
622<3>[ 1.206154] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
623<3>[ 1.206166] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
624<6>[ 1.206186] c3 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
625<6>[ 1.206199] c3 1 mdss_dsi_parse_panel_features: ulps feature disabled
626<6>[ 1.206210] c3 1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
627<6>[ 1.206221] c3 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
628<4>[ 1.206240] c3 1 mdss_dsi_parse_esd_params: ESD_TE_V2 (te_signal_check_v2) method was deprecated, fallback to ESD_TE
629<3>[ 1.206257] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
630<3>[ 1.206268] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
631<6>[ 1.206289] c3 1 htc_mdss_dsi_parse_brt_bl_table: read htc,brt-bl-table success, brt_bl_table_size=3
632<3>[ 1.206390] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,color-temp26-cmds
633<3>[ 1.206423] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-on-fixup-command
634<6>[ 1.206434] c3 1 mdss_panel_parse_dt: Power Control Type=1
635<6>[ 1.206446] c3 1 mdss_dsi_parse_calibration_gain: Not support panel calibration
636<4>[ 1.206476] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
637<6>[ 1.206491] c3 1 mdss_dsi_get_dt_vreg_data: vddio min=1800000, max=1800000, enable=62000, disable=80, ulp_load=80 preonsleep=0, postonsleep=1, preoffsleep=20, postoffsleep=200
638<4>[ 1.206504] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
639<6>[ 1.206517] c3 1 mdss_dsi_get_dt_vreg_data: lab min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=5, preoffsleep=0, postoffsleep=0
640<4>[ 1.206531] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
641<6>[ 1.206544] c3 1 mdss_dsi_get_dt_vreg_data: ibb min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=1, preoffsleep=5, postoffsleep=1
642<3>[ 1.206900] c3 1 no supply entry present: htc,panel-supply-entries-stage2
643<3>[ 1.207009] c3 1 mdss_dsi_parse_ctrl_params:4413 Unable to read qcom,display-id, data=0000000000000000,len=20
644<6>[ 1.207090] c3 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
645<3>[ 1.207126] c3 1 mdss_dsi_parse_gpio_params:4467, extra reset gpio not specified
646<3>[ 1.207163] c3 1 request vddio gpio failed, rc=-16
647<3>[ 1.207199] c3 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
648<3>[ 1.207225] c3 1 mdss_dsi_retrieve_ctrl_resources+0x16c/0x254->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
649<6>[ 1.207235] c3 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001908000 ctrl_size=400 phy_base=ffffff800190a400 phy_size=558
650<6>[ 1.207274] c3 1 dsi_panel_device_register: Continuous splash enabled
651<3>[ 1.208084] c3 1 panel_debug_register_base: debugfs_create_file: data_type fail
652<6>[ 1.208105] c3 1 mdss_dsi_panel_power_on_hx8396c2: ctrl1 ext-vdd_en=0
653<6>[ 1.208130] c3 1 mdss_dsi_panel_power_ctrl_ext: cur_power_state=1 req_power_state=1
654<6>[ 1.208454] c3 1 mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
655<6>[ 1.210165] c3 1 mdss_dsi_status_init: DSI status check interval:5000
656<3>[ 1.211670] c3 1 hdmi_tx_get_dt_data:4463 Unable to read qcom,display-id, data=0000000000000000,len=0
657<6>[ 1.212544] c3 1 hdmi_tx_init_resource: 'core_physical': start = 0xffffff800190e000, len=0x50c
658<6>[ 1.212561] c3 1 hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001910000, len=0x6158
659<6>[ 1.212658] c3 1 hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001918000, len=0xfff
660<6>[ 1.212963] c3 1 hdmi_tx_enable_power: 0, en=1
661<6>[ 1.213116] c3 1 hdmi_tx_enable_power: 0, en=1 done
662<6>[ 1.213128] c3 1 hdmi_tx_enable_power: 0, en=0
663<6>[ 1.213225] c3 1 hdmi_tx_enable_power: 0, en=0 done
664<6>[ 1.213243] c3 1 hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
665<6>[ 1.214248] c3 1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
666<6>[ 1.217129] c3 1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
667<6>[ 1.219615] c3 1 mdss_fb_probe: fb0: split_mode:3 left:0 right:0
668<6>[ 1.221031] c3 1 mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
669<3>[ 1.221755] c3 1 htc_register_attrs
670<6>[ 1.222642] c3 1 mdss_mdp_splash_parse_dt: memaddr=c0000000 size=3000000, use_cma=1
671<6>[ 1.228922] c3 1 mdss_mdp_splash_parse_dt: cma: vaddr=ffffff8003891000, dma=0x00000000c0000000
672<6>[ 1.229075] c3 1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
673<6>[ 1.229280] c3 1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
674<6>[ 1.229850] c3 1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
675<6>[ 1.231017] c3 1 mdss_mdp_splash_parse_dt: memaddr=b1c00000 size=23ff000, use_cma=0
676<6>[ 1.237144] c3 1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
677<6>[ 1.237356] c3 1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
678<3>[ 1.237470] c3 1 mdss_mdp_splash_parse_dt: splash mem child node is not present
679<6>[ 1.240313] c0 6 SlimPort Colorado3 anx7816_i2c_probe start
680<6>[ 1.240824] c0 6 SlimPort Colorado3 gpio p_dwn : 96, reset : 105, gpio_cbl_det 132
681<6>[ 1.244274] c0 6 anx7816_regulator_configure: vdd10 = 1050000 uV, vdd33 = 3300000 uV
682<6>[ 1.244297] c0 6 anx7816_regulator_configure exit rc=0
683<6>[ 1.244397] c2 6 SlimPort Colorado3 anx7816_init_gpio: anx7816 init gpio
684<6>[ 1.247153] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:48
685<6>[ 1.247176] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
686<6>[ 1.247186] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:48
687<6>[ 1.247194] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
688<6>[ 1.247203] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:48
689<6>[ 1.247212] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
690<6>[ 1.247220] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:48
691<6>[ 1.247227] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
692<6>[ 1.248630] c1 6 sp_tx_hardware_poweron enable vdd10 ffffffc0f75eca00
693<3>[ 1.249158] c0 47 smd_channel_probe_now: allocation table not initialized
694<6>[ 1.262257] c1 6 SlimPort Colorado3 sp_tx_hardware_poweron: anx7816 power on
695<6>[ 1.263504] c2 1 In memshare_probe, Memshare probe success
696<3>[ 1.263716] c0 6 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x8 (ok)
697<6>[ 1.264601] c0 6 SlimPort Colorado3 slimport_chip_detect : CHIPID: ANX7816
698<6>[ 1.270984] c0 6 SlimPort Colorado3 sp_tx_hardware_powerdown: anx7816 power down
699<6>[ 1.271485] c0 6 SlimPort Colorado3 anx7816_i2c_probe end
700<6>[ 1.271596] c2 1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
701<5>[ 1.272903] c2 1 msm_rpm_log_probe: OK
702<6>[ 1.274323] c2 1 RPM Version: 20153.0.9
703<6>[ 1.279068] c3 1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
704<6>[ 1.280303] c3 1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
705<4>[ 1.283962] c3 1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
706<4>[ 1.286073] c3 1 htc-smi probe++
707<6>[ 1.291167] c2 1 msm_serial_hs module loaded
708<3>[ 1.292436] c2 1 uart_tx_gpio is not available
709<3>[ 1.292451] c2 1 uart_rx_gpio is not available
710<3>[ 1.292459] c2 1 uart_cts_gpio is not available
711<3>[ 1.292467] c2 1 uart_rfr_gpio is not available
712<6>[ 1.292570] c2 1 Wakeup irq not specified.
713<3>[ 1.293722] c3 1 sps: BAM device 0x0000000007544000 is not registered yet.
714<6>[ 1.293935] c3 1 sps:BAM 0x0000000007544000 is registered.
715<6>[ 1.295761] c3 1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is a MSM HS UART
716<6>[ 1.298288] c3 1 [BT] msm_serial_hs module loaded
717<6>[ 1.299317] c3 1 msm_serial_hsl_probe: serial console disabled, do not proceed msm_serial_hsl_probe().
718<6>[ 1.300554] c3 1 msm_serial_hsl_init: driver initialized
719<4>[ 1.306895] c3 1 [USBDIAG] diagfwd initializing, kernel_flag=[0x0] .., radio_flag=[0x0]
720<6>[ 1.307621] c3 1 [USB] [USB] usb_diag_open: name: diag
721<6>[ 1.315235] c3 1 [USBDIAG] diagchar initialized now
722<6>[ 1.347205] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
723<6>[ 1.347237] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
724<6>[ 1.347245] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
725<6>[ 1.347253] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
726<6>[ 1.347261] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
727<6>[ 1.347268] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
728<6>[ 1.347275] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
729<6>[ 1.347283] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
730<6>[ 1.360082] c3 1 brd: module loaded
731<6>[ 1.361559] c3 1 loop: module loaded
732<6>[ 1.361791] c3 1 zram: Created 1 device(s) ...
733<4>[ 1.361838] c3 1 fpc1020_init
734<4>[ 1.364145] c3 1 Check fpc1020_probe
735<6>[ 1.364343] c3 1 fpc1020 soc:fp_fpc1155: found pin control fpc1020_irq_active
736<4>[ 1.364356] c3 1 i=0
737<6>[ 1.364363] c3 1 fpc1020 soc:fp_fpc1155: found pin control fpc1020_reset_reset
738<4>[ 1.364370] c3 1 i=1
739<6>[ 1.364377] c3 1 fpc1020 soc:fp_fpc1155: found pin control fpc1020_reset_active
740<4>[ 1.364383] c3 1 i=2
741<6>[ 1.364592] c3 1 input: fpc1020 as /devices/soc/soc:fp_fpc1155/input/input2
742<6>[ 1.364925] c3 1 fpc1020 soc:fp_fpc1155: Enabling hardware
743<6>[ 1.364933] c3 1 fpc1020 soc:fp_fpc1155: fpc1020_probe: ok
744<6>[ 1.366225] c3 1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
745<4>[ 1.366304] c3 1 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
746<6>[ 1.366315] c3 1 QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.366324] c3 1 QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
747<4>[ 1.367003] c3 1 QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
748<4>[ 1.369113] c3 1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
749<4>[ 1.369125] c3 1 i2c-core: driver [tabla-i2c-core] using legacy resume method
750<4>[ 1.369194] c3 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
751<4>[ 1.369201] c3 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
752<4>[ 1.369261] c3 1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
753<4>[ 1.369268] c3 1 i2c-core: driver [tasha-i2c-core] using legacy resume method
754<6>[ 1.372029] c3 1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
755<6>[ 1.372054] c3 1 qce 660000.qcedev: CE device = 0x0
756<6>[ 1.372054] c3 1 IO base, CE = 0xffffff80037c0000
757<6>[ 1.372054] c3 1 Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
758<6>[ 1.372054] c3 1 IO base BAM = 0x0000000000000000
759<6>[ 1.372054] c3 1 BAM IRQ 206
760<6>[ 1.372054] c3 1 Engines Availability = 0x2011053
761<6>[ 1.372311] c3 1 sps:BAM 0x0000000000644000 is registered.
762<6>[ 1.372603] c3 1 sps:BAM 0x0000000000644000 (va:0xffffff8006900000) enabled: ver:0x27, number of pipes:16
763<6>[ 1.372965] c3 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 206
764<6>[ 1.382282] c3 1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
765<6>[ 1.382310] c3 1 qcrypto 660000.qcrypto: CE device = 0x0
766<6>[ 1.382310] c3 1 IO base, CE = 0xffffff8006940000
767<6>[ 1.382310] c3 1 Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
768<6>[ 1.382310] c3 1 IO base BAM = 0x0000000000000000
769<6>[ 1.382310] c3 1 BAM IRQ 206
770<6>[ 1.382310] c3 1 Engines Availability = 0x2011053
771<6>[ 1.382851] c3 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 206
772<6>[ 1.388786] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
773<6>[ 1.388978] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
774<6>[ 1.389101] c3 1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
775<6>[ 1.389221] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-des
776<6>[ 1.389342] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-des
777<6>[ 1.389463] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
778<6>[ 1.389592] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
779<6>[ 1.389714] c3 1 qcrypto 660000.qcrypto: qcrypto-xts-aes
780<6>[ 1.389837] c3 1 qcrypto 660000.qcrypto: qcrypto-sha1
781<6>[ 1.389962] c3 1 qcrypto 660000.qcrypto: qcrypto-sha256
782<6>[ 1.390185] c2 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
783<6>[ 1.390351] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
784<6>[ 1.390466] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
785<6>[ 1.390590] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
786<6>[ 1.390708] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
787<6>[ 1.390822] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
788<6>[ 1.390943] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
789<6>[ 1.391063] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
790<6>[ 1.391179] c3 1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
791<6>[ 1.391293] c3 1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
792<6>[ 1.394804] c3 1 ICE IRQ = 31
793<3>[ 1.394964] c3 1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
794<6>[ 1.395036] c3 1 ICE IRQ = 32
795<3>[ 1.401810] c3 1 ufshcd 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -19
796<3>[ 1.403022] c3 1 ufshcd 624000.ufshc: Intialization failed
797<6>[ 1.404862] c3 1 SCSI Media Changer driver v0.25
798<6>[ 1.411719] c2 1 sps:BAM 0x0000000007544000 (va:0xffffff8002340000) enabled: ver:0x19, number of pipes:24
799<6>[ 1.413175] c3 1 spi_master spi2: will run message pump with realtime priority
800<6>[ 1.417720] c3 1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
801<6>[ 1.419159] c3 1 tun: Universal TUN/TAP device driver, 1.6
802<6>[ 1.419169] c3 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
803<6>[ 1.419301] c3 1 PPP generic driver version 2.4.2
804<6>[ 1.419384] c3 1 PPP BSD Compression module registered
805<6>[ 1.419396] c3 1 PPP Deflate Compression module registered
806<6>[ 1.419442] c3 1 PPP MPPE Compression module registered
807<6>[ 1.419459] c3 1 NET: Registered protocol family 24
808<6>[ 1.419504] c3 1 [WLAN] htc_wifi_dev_init: start
809<3>[ 1.419510] c3 1 [WLAN] htc_wifi_init_mem: Enter
810<3>[ 1.419720] c3 1 [WLAN] htc_wifi_init_mem: WIFI MEM Allocated
811<3>[ 1.419729] c3 1 [WLAN] htc_wifi_get_irq_gpio: flags 414
812<4>[ 1.421780] c3 1 [WLAN] htc_wifi_gpio_probe enter
813<3>[ 1.421839] c3 1 [WLAN] htc_wifi_gpio_init: gpio 1010 -> direction_output
814<3>[ 1.421950] c3 1 [WLAN] htc_wifi_gpio_init: gpio 122 -> direction_input
815<3>[ 1.421994] c3 1 [WLAN] htc_wifi_gpio_init: gpio 26 -> direction_input
816<3>[ 1.422032] c3 1 [WLAN] htc_wifi_gpio_init: gpio 25 -> direction_input
817<3>[ 1.422056] c3 1 [WLAN] htc_wifi_rc_num = 0
818<6>[ 1.423210] c3 1 usbcore: registered new interface driver asix
819<6>[ 1.423312] c3 1 usbcore: registered new interface driver ax88179_178a
820<6>[ 1.423343] c3 1 usbcore: registered new interface driver cdc_ether
821<6>[ 1.423487] c3 1 usbcore: registered new interface driver net1080
822<6>[ 1.423520] c3 1 usbcore: registered new interface driver cdc_subset
823<6>[ 1.423553] c3 1 usbcore: registered new interface driver zaurus
824<6>[ 1.423850] c3 1 usbcore: registered new interface driver cdc_ncm
825<6>[ 1.423883] c3 1 usbcore: registered new interface driver qmi_wwan
826<6>[ 1.424569] c3 55 msm_sharedmem: sharedmem_register_qmi: qmi init successful
827<6>[ 1.428354] c3 1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
828<4>[ 1.433306] c3 1 7411000.qusb supply USB3_GDSC not found, using dummy regulator
829<4>[ 1.433741] c3 1 7412000.qusb supply USB3_GDSC not found, using dummy regulator
830<3>[ 1.433794] c3 1 msm-qusb-phy 7412000.qusb: usb-phy-always-on was not found
831<3>[ 1.439047] c3 1 msm-dwc3 6a00000.ssusb: unable to get dbm device
832<6>[ 1.443584] c3 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
833<6>[ 1.443640] c3 1 ehci-pci: EHCI PCI platform driver
834<6>[ 1.443780] c3 1 usbcore: registered new interface driver cdc_wdm
835<6>[ 1.443828] c3 1 usbcore: registered new interface driver usb-storage
836<6>[ 1.443856] c3 1 usbcore: registered new interface driver ums-alauda
837<6>[ 1.443883] c3 1 usbcore: registered new interface driver ums-cypress
838<6>[ 1.443912] c3 1 usbcore: registered new interface driver ums-datafab
839<6>[ 1.443940] c3 1 usbcore: registered new interface driver ums-freecom
840<6>[ 1.443968] c3 1 usbcore: registered new interface driver ums-isd200
841<6>[ 1.443994] c3 1 usbcore: registered new interface driver ums-jumpshot
842<6>[ 1.444020] c3 1 usbcore: registered new interface driver ums-karma
843<6>[ 1.444047] c3 1 usbcore: registered new interface driver ums-sddr09
844<6>[ 1.444074] c3 1 usbcore: registered new interface driver ums-sddr55
845<6>[ 1.444103] c3 1 usbcore: registered new interface driver ums-usbat
846<6>[ 1.444208] c3 1 usbcore: registered new interface driver usbserial
847<6>[ 1.444239] c3 1 usbcore: registered new interface driver ftdi_sio
848<6>[ 1.444264] c3 1 usbserial: USB Serial support registered for FTDI USB Serial Device
849<6>[ 1.444294] c3 1 usbcore: registered new interface driver usb_ehset_test
850<6>[ 1.444977] c3 1 usbcore: registered new interface driver ks_bridge
851<6>[ 1.444986] c3 1 ksb_init: init done
852<6>[ 1.445739] c3 1 [USB] gbridge_init: gbridge_init successs.
853<6>[ 1.445911] c3 1 mousedev: PS/2 mouse device common for all mice
854<6>[ 1.446188] c3 1 usbcore: registered new interface driver xpad
855<6>[ 1.446200] c3 1 [cap] cypress_cap_init: enter
856<6>[ 1.446889] c1 6 [cap] cypress_cap_init_async: +++++
857<6>[ 1.447253] c1 6 [cap] cypress_fw_update_probe
858<6>[ 1.447283] c1 6 [cap][FWU]: register_cap_fw_update: enter
859<6>[ 1.447307] c1 6 [cap][FWU]: register_cap_fw_update: Major number of dev = 225
860<6>[ 1.447307] c1 6
861<6>[ 1.447472] c0 54 [OHIO] ohio_i2c_probe start
862<6>[ 1.447534] c1 6 [cap][FWU]: register_cap_fw_update: register success
863<6>[ 1.448905] c0 54 [USBC][FWU]: register_usbc_fw_update: enter
864<6>[ 1.448945] c0 54 [USBC][FWU]: register_usbc_fw_update: Major number of dev = 224
865<6>[ 1.448945] c0 54
866<6>[ 1.449226] c0 54 [USBC][FWU]: register_usbc_fw_update: register success
867<6>[ 1.451195] c0 54 [OHIO] ohio_i2c_probe: delay 2000ms to detect cbl_det
868<6>[ 1.452098] c0 54 [OHIO] ohio_i2c_probe successfully
869<4>[ 1.452209] c0 54 i2c-core: driver [ohio] using legacy suspend method
870<4>[ 1.452225] c0 54 i2c-core: driver [ohio] using legacy resume method
871<6>[ 1.454011] c3 1 [TP][FWU]: touch_fwu_probe: enter
872<6>[ 1.454066] c3 1 [TP][FWU]: touch_fwu_probe: done
873<6>[ 1.454085] c1 6 [cap] cypress_cap_probe: enter
874<6>[ 1.454118] c1 6 [cap] cypress_parse_dt: Start
875<6>[ 1.454684] c1 6 [cap] cypress_parse_dt: gpio_irq:92, gpio_rst:85, gpio_ind:107
876<6>[ 1.455013] c1 6 [cap] cypress_parse_dt: gpio_id:62(Active High); cap_regulator_volt:1900000uV.
877<6>[ 1.455044] c1 6 [cap] cypress_parse_dt: project ID = 0x10
878<6>[ 1.455073] c1 6 [cap] cypress_parse_dt: cap[0]:APPSELECT
879<6>[ 1.455091] c1 6 [cap] cypress_parse_dt: cap[1]:BACK
880<6>[ 1.455110] c1 6 [cap] cypress_cap_pinctrl_init
881<6>[ 1.455629] c3 1 [HL] (hall_sensor_init) In init HL
882<6>[ 1.455784] c3 1 [KEY] dummy_keypad_init: dummy_keypad: initial running...
883<6>[ 1.455915] c3 1 input: dummy_keypad as /devices/virtual/input/input3
884<6>[ 1.459861] c1 6 [cap] cypress_cap_pinctrl_select: set to 1
885<6>[ 1.460184] c1 6 [cap] cypress_cap_regulator_set: id pin status:0, active low:0, enable=0
886<6>[ 1.460202] c1 6 [cap] cypress_cap_regulator_set: cap regulator voltage is unchanged.
887<6>[ 1.460290] c1 6 [cap] cypress_cap_reset
888<6>[ 1.460363] c0 54 [HL] (hall_sensor_probe) ++++++++++++++++++
889<6>[ 1.460388] c0 54 [HL] (hall_sensor_dt_parser) DT:hall,att_used=2
890<6>[ 1.460677] c0 54 [HL] (hall_sensor_dt_parser) DT:hall,att_gpio[1013] read
891<6>[ 1.460727] c0 54 [HL] (hall_sensor_dt_parser) DT:hall,att_gpio_s[1004] read
892<6>[ 1.460757] c0 54 [HL] (hall_input_register) hall_input_register
893<6>[ 1.460757] c0 54
894<6>[ 1.461038] c0 54 input: AK8789_HALL_SENSOR as /devices/virtual/input/input4
895<6>[ 1.461840] c0 54 [HL] (hall_sensor_probe) Operate in [Interrupt] mode, irq[593]
896<6>[ 1.462164] c0 54 [HL] (hall_sensor_probe) Operate in [Interrupt] mode, irq[594]
897<6>[ 1.462213] c0 54 [HL] (hall_cover_sysfs_init) attribute file register Done
898<6>[ 1.462229] c0 54 [HL] (hall_sensor_probe) ------------------
899<6>[ 1.462322] c3 1 [KEY] keyled_probe: +++
900<6>[ 1.462336] c3 1 [KEY] DT:key_down_delay=3000
901<6>[ 1.462343] c3 1 [KEY] DT:keys_down num_keys=3
902<6>[ 1.462351] c3 1 [KEY] DT:keys_down=116
903<6>[ 1.462356] c3 1 [KEY] DT:keys_down=114
904<6>[ 1.462362] c3 1 [KEY] DT:keys_down=0
905<6>[ 1.462369] c3 1 [KEY] DT:keys_up property not found
906<6>[ 1.462385] c3 1 [KEY] keyled_probe: ---
907<6>[ 1.462677] c0 54 [HL] (hall_sensor_init_async) In reg HL
908<6>[ 1.462784] c3 1 [KEY] keycombo_probe: +++
909<6>[ 1.462837] c3 1 [KEY] keycombo_probe: ---
910<6>[ 1.463450] c3 1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
911<6>[ 1.463688] c3 1 i2c /dev entries driver
912<6>[ 1.463974] c3 1 [AUD] tfa9888: tfa9888_init
913<4>[ 1.464031] c3 1 i2c-core: driver [tfa9888] using legacy suspend method
914<4>[ 1.464038] c3 1 i2c-core: driver [tfa9888] using legacy resume method
915<6>[ 1.464057] c3 1 [NFC] pn544_dev_init: Loading pn548 driver
916<6>[ 1.464097] c3 1 [NFC] pn544_probe:
917<6>[ 1.464207] c3 1 [NFC] pn544_probe : vreg_l30 regulator_get
918<6>[ 1.464232] c3 1 [NFC] pn544_probe : vreg_l30 regulator_set_voltage
919<6>[ 1.464243] c3 1 [NFC] pn544_probe : vreg_l30 regulator_enable
920<6>[ 1.464250] c3 1 [NFC] pn544_probe : vreg_l30 regulator_is_enabled = 1
921<6>[ 1.464258] c3 1 [NFC] pn544_parse_dt: Start
922<6>[ 1.464266] c3 1 [NFC] pn544_parse_dt:ven_isinvert = 0
923<6>[ 1.464283] c3 1 [NFC] pn548_htc_check_rfskuid: Check skuid.rf_id done device has NFC chip[NFC] pn544_parse_dt:is_alive = 1
924<6>[ 1.464739] c3 1 [NFC] pn544_parse_dt: Use crystal as Clock Source
925<6>[ 1.464788] c3 1 [NFC] pn544_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
926<6>[ 1.464815] c3 1 [NFC] pn548_htc_get_bootmode: Check bootmode done NFC_BOOT_MODE_NORMAL mode = recovery
927<6>[ 1.464822] c3 1 [NFC] pn544_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
928<6>[ 1.464843] c3 1 [NFC] pn544_probe : irq_gpio set input 0
929<6>[ 1.464863] c3 1 [NFC] pn544_probe : ven_gpio set 0 0
930<6>[ 1.464880] c3 1 [NFC] pn544_probe : firm_gpio set 0 0
931<6>[ 1.464887] c3 1 [NFC] pn544_probe: init io_wake_lock
932<6>[ 1.464961] c3 1 [NFC] pn544_probe : requesting IRQ 364
933<6>[ 1.465112] c3 1 [NFC] pn544_probe: device_create_file for FTM mode+
934<6>[ 1.465131] c3 1 [NFC] pn544_probe: device_create_file for FTM mode done -
935<6>[ 1.465137] c3 1 [NFC] pn544_probe: Turn off NFC VEN by default (bootmode = 0)
936<6>[ 1.465145] c3 1 [NFC] pn544_Disable: gpio=12 set_value=0
937<6>[ 1.465163] c3 1 [NFC] pn544_probe: Probe success! is_alive : 1, is_uicc_swp : 1
938<4>[ 1.465185] c3 1 i2c-core: driver [pn544] using legacy suspend method
939<4>[ 1.465192] c3 1 i2c-core: driver [pn544] using legacy resume method
940<6>[ 1.465212] c3 1 [LSR] STMVL53L0_i2c_init
941<6>[ 1.465505] c3 1 [LSR] Laser_probe++
942<6>[ 1.465769] c3 1 [LSR] Laser_parse_dt: hw_workaround not found
943<6>[ 1.465833] c3 1 [LSR] Laser_parse_dt: pwdn_gpio = 94
944<6>[ 1.465863] c3 1 [LSR] Laser_parse_dt: power_gpio = 989
945<6>[ 1.465973] c3 1 [LSR] Laser_parse_dt: laser_irq_gpio = 106
946<6>[ 1.465993] c3 1 [LSR] Laser_parse_dt: sensor cali_size = 768
947<6>[ 1.466000] c3 1 [LSR] gyro sensor cali_data[100] = 67
948<6>[ 1.466006] c3 1 [LSR] gyro sensor cali_data[101] = 00
949<6>[ 1.466012] c3 1 [LSR] gyro sensor cali_data[102] = 00
950<6>[ 1.466017] c3 1 [LSR] gyro sensor cali_data[103] = 0e
951<6>[ 1.466023] c3 1 [LSR] gyro sensor cali_data[104] = 67
952<6>[ 1.466029] c3 1 [LSR] gyro sensor cali_data[105] = 00
953<6>[ 1.466034] c3 1 [LSR] gyro sensor cali_data[106] = 08
954<6>[ 1.466040] c3 1 [LSR] gyro sensor cali_data[107] = 00
955<6>[ 1.466046] c3 1 [LSR] Laser_parse_dt: Update offset_kvalue = 14
956<6>[ 1.466052] c3 1 [LSR] Laser_parse_dt: Update xtalk_kvalue = 0x8
957<6>[ 1.466375] c3 1 [LSR] Laser_pinctrl_init
958<6>[ 1.466575] c3 1 [LSR] Requesting irq = 420
959<3>[ 1.480650] c3 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x10 (ok)
960<6>[ 1.482239] c3 1 [LSR] Laser_probe: Successful
961<6>[ 1.520390] c3 1 vmem: Up and running with 4 banks of memory from [io size 0x3f07e37cc9 disabled]
962<6>[ 1.523433] c1 6 [cap] cypress_fw_update_get_data
963<6>[ 1.523461] c1 6 [cap] cypress_fw_update_get_data: match
964<6>[ 1.523476] c1 6 [cap] cypress_init_sensor
965<6>[ 1.523490] c1 6 [cap] cypress_get_version
966<3>[ 1.524722] c1 6 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x12 (ok)
967<6>[ 1.525261] c1 6 [cap] Cypress Cap Sensor V20
968<6>[ 1.525280] c1 6 [cap] cypress_get_project_id
969<6>[ 1.525715] c1 6 [cap] Cypress Cap Sensor project ID:0x10
970<6>[ 1.525733] c1 6 [cap] cypress_init_sensor, cs_bootloader_mode = 0
971<6>[ 1.526028] c1 6 input: cypress-cap-sensor as /devices/virtual/input/input5
972<6>[ 1.526250] c1 6 [cap] debug_mask = 02
973<6>[ 1.526901] c1 6 [cap] cypress_cap_probe : Set IRQ 406 falling edge trigger
974<6>[ 1.526929] c1 6 [cap] cypress_start_up_update
975<6>[ 1.526967] c1 6 [cap] cypress_cap_probe: probe success
976<6>[ 1.527487] c1 6 [cap] cypress_cap_init_async: -----
977<5>[ 1.542273] c3 1 msm_actuator_platform_probe:2243 No valid actuator GPIOs data
978<5>[ 1.542447] c3 1 msm_actuator_platform_probe:2243 No valid actuator GPIOs data
979<6>[ 1.543894] c3 1 msm_ois_init_module:1007 [CAM][OIS]Enter
980<6>[ 1.545020] c3 1 msm_ois_platform_probe:858 [CAM][OIS]Enter
981<6>[ 1.545037] c3 1 msm_ois_platform_probe:881 [CAM][OIS]cell-index 0, rc 0
982<6>[ 1.545046] c3 1 msm_ois_platform_probe:889 [CAM][OIS]qcom,cci-master 0, rc 0
983<5>[ 1.545054] c3 1 msm_ois_platform_probe:909 No valid OIS GPIOs data
984<6>[ 1.545163] c3 1 msm_ois_platform_probe:962 [CAM][OIS]Exit
985<6>[ 1.545199] c3 1 msm_ois_platform_probe:858 [CAM][OIS]Enter
986<6>[ 1.545207] c3 1 msm_ois_platform_probe:881 [CAM][OIS]cell-index 1, rc 0
987<6>[ 1.545214] c3 1 msm_ois_platform_probe:889 [CAM][OIS]qcom,cci-master 1, rc 0
988<5>[ 1.545222] c3 1 msm_ois_platform_probe:909 No valid OIS GPIOs data
989<6>[ 1.545288] c3 1 msm_ois_platform_probe:962 [CAM][OIS]Exit
990<6>[ 1.545331] c3 1 msm_flash_init_module:1518 [CAM][FL]Enter
991<6>[ 1.546269] c3 1 msm_flash_platform_probe:1246 [CAM][FL]Enter
992<6>[ 1.546280] c3 1 msm_flash_get_dt_data:1101 [CAM][FL]called
993<6>[ 1.546291] c3 1 msm_flash_get_dt_data:1115 [CAM][FL]subdev id 0
994<6>[ 1.546298] c3 1 msm_flash_get_dt_data:1123 [CAM][FL]msm_flash_get_dt_data qcom,cci-master 0, rc -22
995<6>[ 1.546306] c3 1 msm_flash_get_pmic_source_info:920 [CAM][FL]msm_flash_get_pmic_source_info:920 switch_src_node NULL
996<6>[ 1.546314] c3 1 msm_flash_get_pmic_source_info:945 [CAM][FL]count 2
997<6>[ 1.546320] c3 1 msm_flash_get_pmic_source_info:952 [CAM][FL]msm_flash_get_pmic_source_info:952 flash_num_sources = 2
998<6>[ 1.546523] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash0_trigger
999<6>[ 1.546536] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[0] 625
1000<6>[ 1.546564] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash1_trigger
1001<6>[ 1.546574] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[1] 625
1002<6>[ 1.546582] c3 1 msm_flash_get_pmic_source_info:1020 [CAM][FL]msm_flash_get_pmic_source_info:1020 fctrl->flash_driver_type = 0
1003<6>[ 1.546589] c3 1 msm_flash_get_pmic_source_info:1025 [CAM][FL]count 2
1004<6>[ 1.546597] c3 1 msm_flash_get_pmic_source_info:1032 [CAM][FL]msm_flash_get_pmic_source_info:1032 torch_num_sources = 2
1005<6>[ 1.546617] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch0_trigger
1006<6>[ 1.546627] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[0] 120
1007<6>[ 1.546648] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch1_trigger
1008<6>[ 1.546657] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[1] 120
1009<6>[ 1.546665] c3 1 msm_flash_get_pmic_source_info:1090 [CAM][FL]msm_flash_get_pmic_source_info:1090 fctrl->flash_driver_type = 0
1010<5>[ 1.546673] c3 1 msm_flash_get_dt_data:1144 No valid flash GPIOs data
1011<6>[ 1.546682] c3 1 msm_flash_get_dt_data:1154 [CAM][FL]msm_flash_get_dt_data:1154 fctrl->flash_driver_type = 0
1012<6>[ 1.547278] c3 1 msm_flash_platform_probe:1303 [CAM][FL]msm_flash_platform_probe:1303 flash sd name = v4l-subdev11msm_torch_create_classdev:118 [CAM][FL]msm_torch_create_classdev:118 msm_torch_brightness_set for torch 0
1013<6>[ 1.547369] c3 1 msm_torch_create_classdev:118 [CAM][FL]msm_torch_create_classdev:118 msm_torch_brightness_set for torch 1<6>[ 1.547415] c3 1 msm_flash_platform_probe:1314 [CAM][FL]probe success
1014<6>[ 1.547449] c3 1 msm_flash_platform_probe:1246 [CAM][FL]Enter
1015<6>[ 1.547455] c3 1 msm_flash_get_dt_data:1101 [CAM][FL]called
1016<6>[ 1.547465] c3 1 msm_flash_get_dt_data:1115 [CAM][FL]subdev id 0
1017<6>[ 1.547472] c3 1 msm_flash_get_dt_data:1123 [CAM][FL]msm_flash_get_dt_data qcom,cci-master 0, rc -22
1018<6>[ 1.547480] c3 1 msm_flash_get_pmic_source_info:920 [CAM][FL]msm_flash_get_pmic_source_info:920 switch_src_node NULL
1019<6>[ 1.547486] c3 1 msm_flash_get_pmic_source_info:945 [CAM][FL]count 2
1020<6>[ 1.547493] c3 1 msm_flash_get_pmic_source_info:952 [CAM][FL]msm_flash_get_pmic_source_info:952 flash_num_sources = 2
1021<6>[ 1.547526] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash0_trigger
1022<6>[ 1.547536] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[0] 625
1023<4>[ 1.547544] c3 1 LED trigger flash0_trigger failed to register (-17)
1024<6>[ 1.547564] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash1_trigger
1025<6>[ 1.547571] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[1] 625
1026<4>[ 1.547578] c3 1 LED trigger flash1_trigger failed to register (-17)
1027<6>[ 1.547584] c3 1 msm_flash_get_pmic_source_info:1020 [CAM][FL]msm_flash_get_pmic_source_info:1020 fctrl->flash_driver_type = 0
1028<6>[ 1.547590] c3 1 msm_flash_get_pmic_source_info:1025 [CAM][FL]count 2
1029<6>[ 1.547598] c3 1 msm_flash_get_pmic_source_info:1032 [CAM][FL]msm_flash_get_pmic_source_info:1032 torch_num_sources = 2
1030<6>[ 1.547616] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch0_trigger
1031<6>[ 1.547627] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[0] 120
1032<4>[ 1.547634] c3 1 LED trigger torch0_trigger failed to register (-17)
1033<6>[ 1.547652] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch1_trigger
1034<6>[ 1.547659] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[1] 120
1035<4>[ 1.547666] c3 1 LED trigger torch1_trigger failed to register (-17)
1036<6>[ 1.547672] c3 1 msm_flash_get_pmic_source_info:1090 [CAM][FL]msm_flash_get_pmic_source_info:1090 fctrl->flash_driver_type = 0
1037<5>[ 1.547678] c3 1 msm_flash_get_dt_data:1144 No valid flash GPIOs data
1038<6>[ 1.547686] c3 1 msm_flash_get_dt_data:1154 [CAM][FL]msm_flash_get_dt_data:1154 fctrl->flash_driver_type = 0
1039<6>[ 1.547742] c3 1 msm_flash_platform_probe:1303 [CAM][FL]msm_flash_platform_probe:1303 flash sd name = v4l-subdev12<3>[ 1.547752] c3 1 msm_torch_create_classdev:130 Invalid fctrl->torch_trigger[0]
1040<6>[ 1.547757] c3 1 msm_flash_platform_probe:1314 [CAM][FL]probe success
1041<4>[ 1.547773] c3 1 qcom,camera-flash: probe of soc:qcom,camera-flash@1 failed with error -22
1042<6>[ 1.548081] c3 1 msm_led_trigger_sysfs_init:1452 [CAM][FL] msm_led_trigger_sysfs_init:1452
1043<6>[ 1.548107] c3 1 msm_led_trigger_sysfs_init:1504 [CAM][FL] msm_led_trigger_sysfs_init:1504 ret 0
1044<6>[ 1.548114] c3 1 msm_flash_init_module:1525 msm_flash_init_module:1525 rc 0
1045<3>[ 1.563622] c3 1 CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
1046<3>[ 1.563648] c3 1 CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
1047<3>[ 1.565160] c3 1 CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
1048<3>[ 1.565170] c3 1 CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
1049<3>[ 1.575761] c3 1 __msm_jpeg_init:1537] Jpeg Device id 0
1050<3>[ 1.577144] c3 1 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
1051<3>[ 1.583706] c3 1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1052<3>[ 1.683434] c3 1 msm_fd aa4000.qcom,fd: Face detection halt timeout
1053<6>[ 1.688790] c1 6 FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=22
1054<4>[ 1.688913] c1 6 ------------[ cut here ]------------
1055<4>[ 1.688951] c1 6 WARNING: CPU: 1 PID: 6 at ../include/linux/of.h:770 fg_probe+0x28c8/0x2a54()
1056<4>[ 1.688967] c1 6 Modules linked in:
1057<4>[ 1.688995] c1 6 CPU: 1 PID: 6 Comm: kworker/u8:0 Not tainted 3.18.63-BeyondStockᵀᴹ-Recovery-pme-Oreo-gad83436-dirty #2
1058<4>[ 1.689012] c1 6 Hardware name: HTC Corporation. MSM8996v3 PME PVT (DT)
1059<4>[ 1.689045] c1 6 Workqueue: events_unbound async_run_entry_fn
1060<0>[ 1.689065] c1 6 Call trace:
1061<4>[ 1.689091] c1 6 [<ffffffc000089ec0>] dump_backtrace+0x0/0x158
1062<4>[ 1.689109] c1 6 [<ffffffc00008a02c>] show_stack+0x14/0x1c
1063<4>[ 1.689133] c1 6 [<ffffffc000f447fc>] dump_stack+0x84/0xa8
1064<4>[ 1.689157] c1 6 [<ffffffc0000a4fc4>] warn_slowpath_common+0x8c/0xb4
1065<4>[ 1.689176] c1 6 [<ffffffc0000a5110>] warn_slowpath_null+0x18/0x20
1066<4>[ 1.689193] c1 6 [<ffffffc0009cbf70>] fg_probe+0x28c8/0x2a54
1067<4>[ 1.689215] c1 6 [<ffffffc000b00378>] spmi_drv_probe+0x14/0x1c
1068<4>[ 1.689240] c1 6 [<ffffffc00060d96c>] driver_probe_device+0x164/0x354
1069<4>[ 1.689257] c1 6 [<ffffffc00060dbc0>] __driver_attach+0x64/0x90
1070<4>[ 1.689274] c1 6 [<ffffffc00060b994>] bus_for_each_dev+0x74/0xb0
1071<4>[ 1.689289] c1 6 [<ffffffc00060d35c>] driver_attach+0x20/0x28
1072<4>[ 1.689305] c1 6 [<ffffffc00060ce4c>] bus_add_driver+0x138/0x248
1073<4>[ 1.689321] c1 6 [<ffffffc00060e754>] driver_register+0x94/0xe0
1074<4>[ 1.689336] c1 6 [<ffffffc000b006b4>] spmi_driver_register+0x5c/0x64
1075<4>[ 1.689359] c1 6 [<ffffffc0015de0e8>] fg_init_async+0x18/0x20
1076<4>[ 1.689374] c1 6 [<ffffffc0000c3850>] async_run_entry_fn+0x80/0x16c
1077<4>[ 1.689399] c1 6 [<ffffffc0000bc464>] process_one_work+0x238/0x414
1078<4>[ 1.689415] c1 6 [<ffffffc0000bcb74>] worker_thread+0x28c/0x3b8
1079<4>[ 1.689434] c1 6 [<ffffffc0000c0efc>] kthread+0xe8/0xf0
1080<4>[ 1.689526] c1 6 ---[ end trace ecd540a81f6bd548 ]---
1081<6>[ 1.691149] c3 1 [BATT] Probe process: (2, 1)
1082<6>[ 1.691228] c0 54 [BATT] htc_battery_fb_register in
1083<6>[ 1.691229] c3 1 [BATT] htc_battery_init done.
1084<6>[ 1.693255] c3 6 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1085<6>[ 1.694354] c3 1 htc-charger soc:htc,htc-charger: qcom,charger-enable-gpio: 988
1086<6>[ 1.694776] c3 1 htc-charger soc:htc,htc-charger: qcom,charger-ready-gpio: 993
1087<3>[ 1.694889] c3 1 htc-charger soc:htc,htc-charger: qcom,adc-sw-sel-gpio not valid: -2
1088<6>[ 1.695345] c3 1 htc-charger soc:htc,htc-charger: vadc_usb_in_isen_channel: 17
1089<6>[ 1.695583] c3 1 htc-charger soc:htc,htc-charger: vadc_vbusdet_channel: 20
1090<6>[ 1.695741] c3 55 FG: update_irq_volt_empty: voltage = 3100, converted_raw = 003d
1091<6>[ 1.695984] c3 1 htc-charger soc:htc,htc-charger: vadc_usb_pwr_temp_channel: 22
1092<6>[ 1.696095] c3 1 htc-charger soc:htc,htc-charger: iusb_rsen: 1400
1093<6>[ 1.696116] c3 1 htc-charger soc:htc,htc-charger: iusb_multiplier: 2050
1094<6>[ 1.696392] c3 1 htc-charger soc:htc,htc-charger: == HTCCHG Parameters ==
1095<6>[ 1.696510] c3 1 htc-charger soc:htc,htc-charger: run_mode: 0
1096<3>[ 1.696654] c3 1 htc-charger soc:htc,htc-charger: Failed to get auth_chk_ms
1097<3>[ 1.696675] c3 1 htc-charger soc:htc,htc-charger: Failed to get opti_chk_ms
1098<3>[ 1.696801] c2 1 htc-charger soc:htc,htc-charger: Failed to get runup_chk_ms
1099<3>[ 1.696821] c2 1 htc-charger soc:htc,htc-charger: Failed to get auth_switch_ms
1100<3>[ 1.696841] c2 1 htc-charger soc:htc,htc-charger: Failed to get ibat_ma_cc
1101<3>[ 1.696861] c2 1 htc-charger soc:htc,htc-charger: Failed to get ibat_ma_mtg
1102<3>[ 1.696879] c2 1 htc-charger soc:htc,htc-charger: Failed to get ibat_ma_rtn
1103<3>[ 1.696899] c2 1 htc-charger soc:htc,htc-charger: Failed to get v_step_ms
1104<3>[ 1.696919] c2 1 htc-charger soc:htc,htc-charger: Failed to get i_step_ms
1105<3>[ 1.696937] c2 1 htc-charger soc:htc,htc-charger: Failed to get soc_min
1106<3>[ 1.696955] c2 1 htc-charger soc:htc,htc-charger: Failed to get soc_max
1107<3>[ 1.696972] c2 1 htc-charger soc:htc,htc-charger: Failed to get soc_stress
1108<3>[ 1.696990] c2 1 htc-charger soc:htc,htc-charger: Failed to get stress_ms
1109<3>[ 1.697006] c2 1 htc-charger soc:htc,htc-charger: Failed to get vbat_mv_resume
1110<3>[ 1.697023] c2 1 htc-charger soc:htc,htc-charger: Failed to get vbat_mv_max
1111<3>[ 1.697040] c2 1 htc-charger soc:htc,htc-charger: Failed to get vbat_mv_stop
1112<3>[ 1.697057] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_cc
1113<3>[ 1.697073] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_cc_l
1114<3>[ 1.697089] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_cc_h
1115<3>[ 1.697105] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_min
1116<3>[ 1.697121] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_start
1117<3>[ 1.697138] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_stop
1118<3>[ 1.697154] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_mtg
1119<3>[ 1.697170] c2 1 htc-charger soc:htc,htc-charger: Failed to get iusb_ma_min
1120<3>[ 1.697190] c2 1 htc-charger soc:htc,htc-charger: Failed to get iusb_ma_max
1121<3>[ 1.697207] c2 1 htc-charger soc:htc,htc-charger: Failed to get iusb_count
1122<3>[ 1.697222] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_count
1123<3>[ 1.697239] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_leave
1124<3>[ 1.697256] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_runup
1125<3>[ 1.697271] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_slope
1126<3>[ 1.697287] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_runup_cnt
1127<3>[ 1.697304] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_enter
1128<3>[ 1.697319] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_resume
1129<3>[ 1.697336] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_stop_warm
1130<3>[ 1.697352] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_stop_hot
1131<6>[ 1.697918] c2 1 htc-charger soc:htc,htc-charger: HTC Charger successfully probed.
1132<6>[ 1.697941] c2 1 htc-charger soc:htc,htc-charger: htcchg_debug_mask=0x6
1133<3>[ 1.697965] c2 1 HTCCHG: htcchg_pinctrl_control: Target does not use pinctrl
1134<3>[ 1.697982] c2 1 htc-charger soc:htc,htc-charger: pinctrl error, rc=-22
1135<6>[ 1.700163] c2 1 set_restart_reason: set restart reason = 776655aa
1136<6>[ 1.700197] c2 1 set_restart_msg: set restart msg = `Unknown'
1137<3>[ 1.702528] c2 1 unable to find DT imem DLOAD mode node
1138<3>[ 1.705005] c2 1 unable to find DT imem EDLOAD mode node
1139<6>[ 1.742303] c3 1 device-mapper: uevent: version 1.0.3
1140<6>[ 1.742524] c3 1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1141<6>[ 1.742652] c3 1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
1142<6>[ 1.742652] c3 1
1143<4>[ 1.744729] c3 1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
1144<6>[ 1.744748] c3 1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
1145<6>[ 1.744755] c3 1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1146<6>[ 1.745918] c3 1 [BT] == rfkill_probe ==
1147<6>[ 1.745950] c3 1 fd=29, apply=23
1148<6>[ 1.745956] c3 1 fd=14, state=bf
1149<6>[ 1.745962] c3 1 fd=7a, status=80
1150<6>[ 1.745993] c3 1 [BT] bt-regon-gpio: 1021
1151<4>[ 1.746080] c3 1 [BT] Init GPIO pins
1152<6>[ 1.748158] c3 1 [BT] msm_hs_uart_gpio_config_ext: set gpio_state_suspend
1153<6>[ 1.748239] c3 1 [BT] == R OFF ==
1154<6>[ 1.749669] c3 1 Bluetooth: bluesleep_init: BlueSleep Mode Driver Ver 1.1
1155<6>[ 1.750459] c3 1 Bluetooth: bluesleep_populate_dt_pinfo: bt_host_wake 117, bt_ext_wake 118
1156<6>[ 1.750509] c3 1 Bluetooth: bluesleep_probe: host_wake_irq 431, polarity 0
1157<6>[ 1.751774] c3 1 Bluetooth: bluesleep_init: BlueSleep Mode Driver Initialized
1158<6>[ 1.751946] c3 1 sdhci: Secure Digital Host Controller Interface driver
1159<6>[ 1.751953] c3 1 sdhci: Copyright(c) Pierre Ossman
1160<6>[ 1.751964] c3 1 sdhci-pltfm: SDHCI platform and OF driver helper
1161<6>[ 1.752334] c3 1 [LED]led driver probe
1162<6>[ 1.752364] c3 1 [LED] check_power_source, pid = 403, pcb_id = 128
1163<6>[ 1.752372] c3 1 [LED]button-backlight not use power source 0xa000
1164<6>[ 1.752395] c3 1 [LED]led driver probe
1165<6>[ 1.752413] c3 1 [LED] check_power_source, pid = 403, pcb_id = 128
1166<6>[ 1.753131] c3 1 qpnp_lpg_calc_period: LPG channel '3' pwm size is forced to=9
1167<6>[ 1.753536] c3 1 [LED]get_brightness_mapping_table, vk-pwm-array table_level_num: 11
1168<6>[ 1.753548] c3 1 [LED]Get cmdline success
1169<6>[ 1.753567] c3 1 [LED]color_ID match BLK00, use color_ID: 1, touch_solution = 2
1170<6>[ 1.753591] c3 1 [LED]led id = 6, array index = 0
1171<6>[ 1.753597] c3 1 [LED]led driver probe --
1172<6>[ 1.753640] c3 1 [LED]led driver probe
1173<6>[ 1.754091] c3 1 [LED]led id = 3, array index = 0
1174<6>[ 1.754488] c3 1 [LED]led id = 4, array index = 1
1175<6>[ 1.754779] c3 1 [LED]led id = 9, array index = 2
1176<6>[ 1.754786] c3 1 [LED]led driver probe --
1177<6>[ 1.756225] c0 6 qcom_ice_get_pdevice: found ice device ffffffc031c25a00
1178<6>[ 1.756241] c0 6 qcom_ice_get_pdevice: matching platform device ffffffc0f8008000
1179<3>[ 1.757414] c0 6 sdhci_msm 7464900.sdhci: Could not get active SDR104 pinstates, err:-19
1180<3>[ 1.757437] c0 6 sdhci_msm 7464900.sdhci: Parsing Pinctrl failed with -19, falling back on GPIO lib
1181<6>[ 1.761692] c0 6 qcom_ice 7443000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8002450000
1182<6>[ 1.762384] c0 6 sdhci_msm 7464900.sdhci: No vmmc regulator found
1183<6>[ 1.762398] c0 6 sdhci_msm 7464900.sdhci: No vqmmc regulator found
1184<6>[ 1.763059] c0 6 mmc0: SDHCI controller on 7464900.sdhci [7464900.sdhci] using 64-bit ADMA in CMDQ mode
1185<4>[ 1.799299] c1 6 sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
1186<6>[ 1.802290] c1 6 sdhci_msm 74a4900.sdhci: Could get active SDR104 pinstates
1187<6>[ 1.819862] c0 6 sdhci_msm 74a4900.sdhci: No vmmc regulator found
1188<6>[ 1.819895] c0 6 sdhci_msm 74a4900.sdhci: No vqmmc regulator found
1189<6>[ 1.820639] c0 6 mmc1: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
1190<6>[ 1.820943] c2 361 SD : Enabling slot power
1191<6>[ 1.837630] c0 54 mmc0: Out-of-interrupt timeout is 100[ms]
1192<6>[ 1.837646] c0 54 mmc0: BKOPS_EN equals 0x2
1193<6>[ 1.837655] c0 54 mmc0: eMMC FW version: 0x32
1194<6>[ 1.837663] c0 54 mmc0: CMDQ limit depth: 32 -> 16
1195<6>[ 1.837671] c0 54 mmc0: CMDQ supported: depth: 16
1196<6>[ 1.837679] c0 54 mmc0: cache barrier support 1 flush policy 1
1197<4>[ 1.837687] c0 54 mmc_read_ext_csd: ext_csd[EXT_CSD_FFU_FEATURES]=0
1198<6>[ 1.837696] c0 54 mmc0: cid 450100444634303332013fd8684a3300
1199<6>[ 1.837704] c0 54 mmc0: csd d00f00328f5903ffffffffef8a404000
1200<6>[ 1.837716] c0 54 mmc0: ext_csd_511 000000000000000101013f3f01030305
1201<6>[ 1.837727] c0 54 mmc0: ext_csd_495 00030300100000000001000000000000
1202<6>[ 1.837737] c0 54 mmc0: ext_csd_479 00000000000000000000000000000000
1203<6>[ 1.837746] c0 54 mmc0: ext_csd_463 00000000000000000000000000000000
1204<6>[ 1.837756] c0 54 mmc0: ext_csd_447 00000000000000000000000000000000
1205<6>[ 1.837765] c0 54 mmc0: ext_csd_431 00000000000000000000000000000000
1206<6>[ 1.837774] c0 54 mmc0: ext_csd_415 00000000000000000000000000000000
1207<6>[ 1.837784] c0 54 mmc0: ext_csd_399 00000000000000000000000000000000
1208<6>[ 1.837793] c0 54 mmc0: ext_csd_383 00000000000000000000000000000000
1209<6>[ 1.837802] c0 54 mmc0: ext_csd_367 00000000000000000000000000000000
1210<6>[ 1.837811] c0 54 mmc0: ext_csd_351 00000000000000000000000000000000
1211<6>[ 1.837821] c0 54 mmc0: ext_csd_335 00000000000000000000000000000000
1212<6>[ 1.837830] c0 54 mmc0: ext_csd_319 0000000000000000000000011f000000
1213<6>[ 1.837839] c0 54 mmc0: ext_csd_303 00000000000000000000000000000000
1214<6>[ 1.837849] c0 54 mmc0: ext_csd_287 00000000000000000000000000000000
1215<6>[ 1.837858] c0 54 mmc0: ext_csd_271 00000101010808085341202031313032
1216<6>[ 1.837868] c0 54 mmc0: ext_csd_255 3032dd00001000191901000000025a01
1217<6>[ 1.837878] c0 54 mmc0: ext_csd_239 00dddd000000000355a6a60700200801
1218<6>[ 1.837887] c0 54 mmc0: ext_csd_223 030110080717121703a3e000010a0a0a
1219<6>[ 1.837897] c0 54 mmc0: ext_csd_207 0a0a0a000000dddd030a1f5700020008
1220<6>[ 1.837906] c0 54 mmc0: ext_csd_191 000000000d0000010000000000000000
1221<6>[ 1.837916] c0 54 mmc0: ext_csd_175 00000000100000201f15000002010007
1222<6>[ 1.837925] c0 54 mmc0: ext_csd_159 00049200000000000000000000000000
1223<6>[ 1.837935] c0 54 mmc0: ext_csd_143 00000000000000000000000000010000
1224<6>[ 1.837944] c0 54 mmc0: ext_csd_127 00000000000000020000000000000000
1225<6>[ 1.837954] c0 54 mmc0: ext_csd_111 00000000000000000000000000000000
1226<6>[ 1.837963] c0 54 mmc0: ext_csd_095 02000400000000000000030000000000
1227<6>[ 1.837972] c0 54 mmc0: ext_csd_079 00000000000000000000000000000000
1228<6>[ 1.837982] c0 54 mmc0: ext_csd_063 0000000a000000000000000000000000
1229<6>[ 1.837991] c0 54 mmc0: ext_csd_047 00000000000000000000000000000000
1230<6>[ 1.838000] c0 54 mmc0: ext_csd_031 010000000000000000000133e4c80308
1231<6>[ 1.838010] c0 54 mmc0: ext_csd_015 00000000000000000000000000000000
1232<6>[ 1.838021] c0 54 mmc0: SanDisk: 202011
1233<6>[ 1.845891] c0 54 cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
1234<6>[ 1.846142] c0 54 desc-base: 0xffffff800247b000 trans-base: 0xffffff80024c1000
1235<6>[ 1.846142] c0 54 desc_dma 0xf7899000 trans_dma: 0xf79c0000
1236<6>[ 1.846199] c0 54 mmc0: CMDQ enabled on card
1237<6>[ 1.846218] c0 54 mmc0: new HS400 MMC card at address 0001
1238<6>[ 1.846868] c0 54 sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f32a0700)
1239<6>[ 1.846898] c0 54 sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f32a0708)
1240<6>[ 1.847143] c0 54 mmcblk0: mmc0:0001 DF4032 29.1 GiB
1241<6>[ 1.847298] c0 54 mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB
1242<4>[ 1.849764] c0 54 Alternate GPT is invalid, using primary GPT.
1243<6>[ 1.849864] c0 54 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66 p67
1244<6>[ 1.854092] c1 1 qpnp_wled_parse_dt: low setting=10000, watermark=561
1245<6>[ 1.856926] c1 1 register_htc_flashlight: id 1 registered for (qpnp_wled_flash_mode+0x0/0x24, qpnp_wled_torch_mode+0x0/0x24)
1246<6>[ 1.857229] c1 1 hidraw: raw HID events driver (C) Jiri Kosina
1247<6>[ 1.857702] c1 1 usbcore: registered new interface driver usbhid
1248<6>[ 1.857718] c1 1 usbhid: USB HID core driver
1249<6>[ 1.858908] c1 1 [S_HUB] mcu_spi_prb++: Do not call iio_push_to_buffers when !pseudo_irq_enable
1250<6>[ 1.859011] c1 1 [S_HUB] gs_kvalue = 6703f4f2
1251<6>[ 1.859021] c1 1 [S_HUB] gy_kvalue = 67000000
1252<6>[ 1.859029] c1 1 [S_HUB] als_kvalue = 6da50293
1253<6>[ 1.859038] c1 1 [S_HUB] ps_kheader = 50530306, ps_kvalue = 0014002a
1254<6>[ 1.859047] c1 1 [S_HUB] bs_kheader = 00000000, bs_kvalue = 00000000
1255<6>[ 1.859827] c1 1 [S_HUB] mcu_parse_dt: touch_enable = 1
1256<6>[ 1.859845] c1 1 [S_HUB] mcu_parse_dt: vibrate_ms = 25
1257<6>[ 1.859855] c1 1 [S_HUB] mcu_parse_dt: acceleration axes = 7
1258<6>[ 1.859864] c1 1 [S_HUB] mcu_parse_dt: Compass axes = 7
1259<6>[ 1.859872] c1 1 [S_HUB] mcu_parse_dt: gyro axes = 7
1260<6>[ 1.859881] c1 1 [S_HUB] mcu_parse_dt: als_goldl = 0xfa
1261<6>[ 1.859890] c1 1 [S_HUB] mcu_parse_dt: als_goldh = 0x3
1262<6>[ 1.859899] c1 1 [S_HUB] mcu_parse_dt: ps_thd_add = 0x28
1263<6>[ 1.859908] c1 1 [S_HUB] mcu_parse_dt: ps_thd_fixed = 0x15
1264<6>[ 1.859917] c1 1 [S_HUB] mcu_parse_dt: als_polling = 1
1265<6>[ 1.859930] c1 1 [S_HUB] mcu_parse_dt: ps_info = 0x1
1266<3>[ 1.859940] c1 1 [S_HUB] mcu_parse_dt: als_oc_protect not found
1267<6>[ 1.860492] c1 1 [S_HUB] mcu_parse_dt: Set v_sr_2v85 to HPM success
1268<6>[ 1.860762] c1 1 [S_HUB] mcu_parse_dt: Set v_srio_1v8 to HPM success
1269<6>[ 1.860780] c1 1 [S_HUB] mcu_parse_dt: need_notify_display = 1
1270<6>[ 1.860790] c1 1 [S_HUB] mcu_parse_dt: need_compass_filter = 0
1271<3>[ 1.860841] c1 1 [S_HUB] CWMCU_probe_init : request cwmcu_status
1272<6>[ 1.860870] c1 1 [S_HUB] mcu_prb: gpio_mcu_status_level:0
1273<6>[ 1.860951] c1 1 [S_HUB] mcu_pinctrl_init
1274<6>[ 1.863654] c1 1 [S_HUB] CWMCU_probe_init success!
1275<6>[ 1.863686] c1 1 [S_HUB] CWMCU_spi_probe success!
1276<6>[ 1.863693] c1 1 [S_HUB] dl_spi_prb
1277<6>[ 1.863760] c1 1 [S_HUB] fw_fla_prb
1278<6>[ 1.863898] c1 167 [S_HUB] rst_hub: gpio_rst = 0
1279<6>[ 1.863973] c2 54 mmc1: mmc_rescan rescan_disable 0 nonremovable 0 rescan_entered 0
1280<6>[ 1.864593] c1 1 ashmem: initialized
1281<6>[ 1.864859] c1 1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1282<6>[ 1.867123] c1 1 [VIB] qpnp_haptic_probe: ++
1283<6>[ 1.867612] c1 1 [VIB] Set Vmax=2828, reg=0x30
1284<7>[ 1.868446] c1 1 Registered vibrator trigger enabler: qpnp-haptic
1285<6>[ 1.868700] c1 1 [VIB] qpnp_haptic_probe: --, play_mode=0
1286<6>[ 1.878990] c1 167 [S_HUB] rst_hub: gpio_rst = 1
1287<6>[ 1.880885] c3 1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1288<6>[ 1.882519] c3 1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1289<6>[ 1.882571] c3 1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1290<6>[ 1.885668] c3 1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1291<3>[ 1.890216] c3 1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1292<3>[ 1.890371] c3 1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1293<3>[ 1.890503] c3 1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1294<3>[ 1.890635] c3 1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1295<3>[ 1.891868] c3 1 devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1296<6>[ 1.895053] c3 1 [NC] == NC_probe ==
1297<6>[ 1.895068] c3 1 [NC] Init GPIO pins
1298<6>[ 1.895248] c3 1 sysinfo_proc_init: Init HTC system info proc interface.
1299<3>[ 1.896472] c3 1 sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
1300<6>[ 1.896482] c3 1 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
1301<6>[ 1.896967] c3 1 Trustonic (null): mobicore_init: MobiCore mcDrvModuleApi version is 2.1
1302<6>[ 1.897313] c3 1 Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310A-V002-20151016_104913_950
1303<6>[ 1.897918] c3 1 [smem]htc_radio_smem_init.
1304<6>[ 1.898419] c3 1 [smem]htc_radio_smem_probe: start.
1305<6>[ 1.898454] c3 1 [smem]htc_radio_smem_probe: smem_via_smd=0xffffff8000610130, secure_smem=0xffffff8000610930.
1306<6>[ 1.898510] c3 1 [smem]check_smlog_alloc: smlog is disabled.
1307<6>[ 1.898516] c3 1 [smem]set_smlog_magic: smlog_magic:0x0, smlog_base:0x0, smlog_size:0x0.
1308<6>[ 1.898527] c3 1 [smem]htc_radio_smem_write: RCMS NAME=, SKU_NAME=, version=0x20140901, size=2048, boot_mode=8, radioflag=0x0, radioflagex1=0x0, radioflagex2=0x0
1309<6>[ 1.898532] c3 1 [smem]htc_radio_smem_probe: end.
1310<6>[ 1.898780] c3 1 sysinfo_proc_init: Init HTC Debug Flag proc interface.
1311<6>[ 1.898788] c3 1 init_from_device_tree - length: 64
1312<6>[ 1.898794] c3 1 init_from_device_tree - loglevel: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
1313<6>[ 1.898813] c3 1 [SECURITY] msm_serial_proc_init: Init HTC msm-serial proc interface.
1314<6>[ 1.898820] c3 1 [SECURITY] init_from_device_tree - length: 21
1315<6>[ 1.898825] c3 1 [SECURITY] init_from_device_tree - LABEL_MSM_SERIAL_NUM: 953244639
1316<6>[ 1.898967] c3 1 usbcore: registered new interface driver snd-usb-audio
1317<3>[ 1.901719] c3 1 msm8996-pinctrl 1010000.pinctrl: pin GPIO_69 already requested by soc:htc,htc_nc_pins; cannot claim for soc:audio_ext_clk
1318<3>[ 1.901733] c3 1 msm8996-pinctrl 1010000.pinctrl: pin-69 (soc:audio_ext_clk) status -22
1319<3>[ 1.901741] c3 1 msm8996-pinctrl 1010000.pinctrl: could not request pin 69 (GPIO_69) from group gpio69 on device 1010000.pinctrl
1320<3>[ 1.901747] c3 1 audio-ref-clk soc:audio_ext_clk: Error applying setting, reverse things back
1321<3>[ 1.901754] c3 1 audio-ref-clk soc:audio_ext_clk: audio_get_pinctrl: Disable TLMM pins failed with -22
1322<6>[ 1.903188] c3 1 [AUD] snd_soc_tfa98xx: TFA98XX driver version 2.10.1-a
1323<6>[ 1.903236] c3 1 [AUD] snd_soc_tfa98xx: tfa98xx_i2c_probe
1324<3>[ 1.903887] c3 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x23 (ok)
1325<6>[ 1.904165] c3 1 [AUD] snd_soc_tfa98xx: TFA9888 detected
1326<6>[ 1.904188] c3 1 tfa98xx 7-0034: Skipping IRQ registration
1327<6>[ 1.904242] c3 1 [AUD] snd_soc_tfa98xx: tfa98xx_i2c_probe Probe completed successfully!
1328<3>[ 1.914567] c3 1 msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec: msm_dai_q6_mi2s_dev_probe: missing 0x0 in dt node
1329<4>[ 1.914586] c3 1 msm-dai-q6-mi2s: probe of soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec failed with error -22
1330<3>[ 1.914778] c3 1 msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-tert: msm_dai_q6_mi2s_dev_probe: missing 0x0 in dt node
1331<4>[ 1.914788] c3 1 msm-dai-q6-mi2s: probe of soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-tert failed with error -22
1332<6>[ 1.917798] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
1333<6>[ 1.918153] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
1334<6>[ 1.918165] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1335<6>[ 1.918376] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1 dev_id: 0x9013
1336<6>[ 1.918387] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1337<6>[ 1.918585] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2 dev_id: 0x9015
1338<6>[ 1.918596] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1339<6>[ 1.918790] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3 dev_id: 0x9017
1340<6>[ 1.918800] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1341<6>[ 1.918826] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1342<6>[ 1.919015] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1343<6>[ 1.919027] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1344<6>[ 1.919217] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1345<6>[ 1.919228] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1346<6>[ 1.919424] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1347<6>[ 1.919435] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1348<6>[ 1.919627] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1349<6>[ 1.919638] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1350<6>[ 1.919664] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1351<6>[ 1.919857] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1352<6>[ 1.919868] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1353<6>[ 1.920110] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1354<6>[ 1.920121] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1355<6>[ 1.920323] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1356<6>[ 1.920334] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1357<6>[ 1.920526] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1358<6>[ 1.920538] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1359<6>[ 1.920565] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1360<6>[ 1.920755] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1361<6>[ 1.920766] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1362<6>[ 1.920961] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1363<6>[ 1.920971] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1364<6>[ 1.921168] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1365<6>[ 1.921179] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1366<6>[ 1.921376] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1367<6>[ 1.921386] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1368<6>[ 1.921414] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1369<6>[ 1.921606] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1370<6>[ 1.921617] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1371<6>[ 1.921816] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1372<6>[ 1.921827] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1373<6>[ 1.922022] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1374<6>[ 1.922033] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1375<6>[ 1.922228] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1376<6>[ 1.922238] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1377<6>[ 1.935644] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1378<6>[ 1.935677] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1379<6>[ 1.935703] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1380<6>[ 1.935728] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1381<3>[ 1.937752] c3 1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1382<6>[ 1.940112] c3 1 GACT probability NOT on
1383<6>[ 1.940136] c3 1 Mirror/redirect action on
1384<6>[ 1.940160] c3 1 u32 classifier
1385<6>[ 1.940165] c3 1 Actions configured
1386<6>[ 1.940193] c3 1 Netfilter messages via NETLINK v0.30.
1387<6>[ 1.940235] c3 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1388<6>[ 1.940450] c3 1 ctnetlink v0.93: registering with nfnetlink.
1389<6>[ 1.940877] c3 1 xt_time: kernel timezone is -0000
1390<6>[ 1.941057] c3 1 ip_tables: (C) 2000-2006 Netfilter Core Team
1391<6>[ 1.941165] c3 1 arp_tables: (C) 2002 David S. Miller
1392<6>[ 1.941201] c3 1 TCP: cubic registered
1393<6>[ 1.941211] c3 1 Initializing XFRM netlink socket
1394<6>[ 1.941495] c3 1 NET: Registered protocol family 10
1395<6>[ 1.942117] c3 1 mip6: Mobile IPv6
1396<6>[ 1.942137] c3 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
1397<6>[ 1.942242] c3 1 sit: IPv6 over IPv4 tunneling driver
1398<6>[ 1.942518] c3 1 NET: Registered protocol family 17
1399<6>[ 1.942543] c3 1 NET: Registered protocol family 15
1400<6>[ 1.942588] c3 1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1401<6>[ 1.942597] c3 1 Ebtables v2.0 registered
1402<6>[ 1.942783] c2 1 Bluetooth: ffffffc0f9647c98
1403<6>[ 1.942803] c2 1 Bluetooth: ffffffc0f9647cd8Bluetooth: ffffffc0f9647cb8
1404<6>[ 1.942828] c2 1 Bluetooth: ffffffc0f9647cb8Bluetooth: ffffffc0f9647c88
1405<6>[ 1.942845] c2 1 Bluetooth: ffffffc0f9647d08Bluetooth: ffffffc0f9647cd8
1406<6>[ 1.942879] c2 1 l2tp_core: L2TP core driver, V2.0
1407<6>[ 1.942894] c2 1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
1408<6>[ 1.942903] c2 1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1409<6>[ 1.942921] c2 1 l2tp_netlink: L2TP netlink interface
1410<6>[ 1.942946] c2 1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1411<6>[ 1.942963] c2 1 l2tp_debugfs: L2TP debugfs support
1412<6>[ 1.942972] c2 1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1413<6>[ 1.944043] c2 1 NET: Registered protocol family 27
1414<6>[ 1.944162] c2 1 [NET]htc_net_debug_init start.
1415<6>[ 1.948007] c3 376 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1416<6>[ 1.948538] c3 376 pil_tz_driver_probe: CONFIG_HTC_FEATURES_SSR_LPASS_ENABLE, RESET_SUBSYS_COUPLED.
1417<6>[ 1.948926] c3 376 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1418<3>[ 1.949895] c0 47 smd_channel_probe_now: allocation table not initialized
1419<4>[ 1.950010] c3 376 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1420<6>[ 1.950672] c3 376 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1421<6>[ 1.953283] c3 376 sps:BAM 0x0000000006b04000 is registered.
1422<3>[ 1.955226] c3 376 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1423<6>[ 1.955252] c3 376 SMBCHG: smbchg_check_chg_version: PMI8996 version:1
1424<6>[ 1.955377] c3 376 smbcharger_charger_otg: no parameters
1425<6>[ 1.955485] c3 376 smbcharger_external_otg: no parameters
1426<6>[ 1.955510] c3 376 smbcharger_external_otg: supplied by pmi8994_boost_5v
1427<6>[ 1.955603] c3 376 HVDCP_ENABLE: HVDCP_PMIC_VOTER,0 voting on of val=1
1428<6>[ 1.955610] c3 376 HVDCP_ENABLE: effective vote is now 1 voted by HVDCP_PMIC_VOTER,0
1429<3>[ 1.955616] c3 376 SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 1
1430<6>[ 1.956155] c3 376 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 voting on of val=1
1431<6>[ 1.956161] c3 376 BATTCHG_SUSPEND: effective vote is now 1 voted by BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0
1432<6>[ 1.956192] c3 376 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 voting off of val=0
1433<6>[ 1.956197] c3 376 USB_SUSPEND: effective vote is now 0 voted by FAKE_BATTERY_EN_VOTER,0
1434<6>[ 1.956738] c2 376 USB_SUSPEND: USER_EN_VOTER,1 Ignoring similar vote off of val=0
1435<6>[ 1.956746] c2 376 DC_SUSPEND: USER_EN_VOTER,0 voting off of val=0
1436<6>[ 1.956752] c2 376 DC_SUSPEND: effective vote is now 0 voted by USER_EN_VOTER,0
1437<6>[ 1.956840] c2 376 DCIN_ICL: PSY_ICL_VOTER,0 voting on of val=1500
1438<6>[ 1.956846] c2 376 DCIN_ICL: effective vote is now 1500 voted by PSY_ICL_VOTER,0
1439<6>[ 1.956996] c2 376 BATT_FCC: BATT_TYPE_FCC_VOTER,0 voting on of val=3000
1440<6>[ 1.957002] c2 376 BATT_FCC: effective vote is now 3000 voted by BATT_TYPE_FCC_VOTER,0
1441<6>[ 1.957093] c2 376 HWAICL_ENABLE_INDIRECT: DEFAULT_CONFIG_HW_AICL_VOTER,0 voting on of val=1
1442<6>[ 1.957099] c2 376 HWAICL_ENABLE_INDIRECT: effective vote is now 1 voted by DEFAULT_CONFIG_HW_AICL_VOTER,0
1443<6>[ 1.957105] c2 376 HWAICL_DISABLE: HW_AICL_RERUN_ENABLE_INDIRECT_VOTER,0 voting off of val=0
1444<6>[ 1.957110] c2 376 HWAICL_DISABLE: effective vote is now 0 voted by HW_AICL_RERUN_ENABLE_INDIRECT_VOTER,0
1445<3>[ 1.957901] c2 17 SMBCHG: smbchg_clean_tcc_WA_work: called before init
1446<6>[ 1.980639] c2 376 USB_ICL: PSY_ICL_VOTER,0 voting on of val=100
1447<6>[ 1.980648] c2 376 USB_ICL: effective vote is now 100 voted by PSY_ICL_VOTER,0
1448<6>[ 1.980656] c2 376 USB_SUSPEND: USB_EN_VOTER,2 Ignoring similar vote off of val=0
1449<6>[ 1.980751] c2 376 [USB] charger type: USB_SDP_CHARGER
1450<6>[ 1.980854] c2 376 [USB] check_vbus_in : 0 -> 1
1451<6>[ 1.980897] c3 374 [USB] dwc3_msm_otg_sm_work: undefined state
1452<6>[ 1.981314] c2 396 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
1453<6>[ 1.981322] c2 396 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
1454<6>[ 1.981388] c2 396 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
1455<6>[ 1.981393] c2 396 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
1456<6>[ 1.981399] c2 396 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
1457<6>[ 1.981404] c2 396 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
1458<6>[ 1.981653] c2 396 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
1459<6>[ 1.981660] c2 396 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
1460<6>[ 1.981688] c2 396 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=0
1461<3>[ 1.984503] c2 376 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1462<6>[ 1.984512] c2 376 [USB] check_vbus_in : 1 -> 1
1463<4>[ 1.984534] c2 376 smbchg_debug_mask=0x6
1464<6>[ 1.988384] c2 376 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1465<6>[ 1.988390] c2 376 [BATT] Probe process: (0, 2)
1466<6>[ 1.988455] c2 376 SMBCHG: handle_usb_insertion: triggered
1467<6>[ 1.988485] c2 376 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1468<6>[ 1.988538] c2 376 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1469<6>[ 1.988545] c2 376 USB_ICL: PSY_ICL_VOTER,0 voting on of val=100
1470<6>[ 1.988551] c2 376 USB_ICL: effective vote is now 100 voted by PSY_ICL_VOTER,0
1471<6>[ 1.988557] c2 376 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1472<6>[ 1.988562] c2 376 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
1473<6>[ 1.988568] c2 376 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
1474<6>[ 1.988682] c2 376 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1475<6>[ 1.988699] c3 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(-1) power_ok(1)
1476<6>[ 1.988712] c2 376 SMBCHG: get_parallel_psy: parallel charger not found
1477<6>[ 1.988717] c2 376 [USB] charger type: USB_SDP_CHARGER
1478<6>[ 1.988818] c2 376 [USB] check_vbus_in : 1 -> 1
1479<6>[ 1.988837] c2 376 SMBCHG: get_parallel_psy: parallel charger not found
1480<6>[ 1.988843] c2 376 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
1481<6>[ 1.989710] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1482<6>[ 1.989739] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1483<6>[ 1.989765] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1484<6>[ 1.989790] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1485<3>[ 1.991806] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1486<6>[ 1.992191] c2 396 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
1487<6>[ 1.992200] c2 396 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
1488<6>[ 1.992237] c2 396 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
1489<6>[ 1.992243] c2 396 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
1490<6>[ 1.992250] c2 396 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1491<6>[ 1.992256] c2 396 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
1492<6>[ 1.992261] c2 396 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
1493<6>[ 1.992294] c2 396 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1494<6>[ 1.992316] c2 396 SMBCHG: get_parallel_psy: parallel charger not found
1495<6>[ 1.992413] c0 417 SMBCHG: power_ok_handler: triggered: 0x00.
1496<5>[ 1.993058] c3 1 Loading compiled-in X.509 certificates
1497<5>[ 1.993913] c3 1 Loaded X.509 cert 'Magrathea: Glacier signing key: 89559970e2cc3f42952c626902f39989717e35a9'
1498<6>[ 1.993938] c3 1 registered taskstats version 1
1499<5>[ 1.997402] c2 1 Key type encrypted registered
1500<3>[ 1.999948] c0 1 scm_call failed: func id 0x42001601, ret: -1, syscall returns: 0x0, 0x0, 0x0
1501<6>[ 2.001161] c0 1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1502<6>[ 2.002895] c0 1 adsprpc: channel link type: 0
1503<4>[ 2.004245] c1 374 [USB] USB3_QSERDES_TX_EMP_POST1_LVL = f
1504<4>[ 2.004271] c1 374 [USB] USB3_QSERDES_TX_DRV_LVL = 1
1505<6>[ 2.006829] c1 378 [USB] dwc3_msm_otg_sm_work: b_peripheral state
1506<6>[ 2.006881] c1 378 [USB] dwc3_msm_otg_sm_work: b_peripheral state
1507<3>[ 2.015507] c2 376 Unable to find log_buf by kallsyms!
1508<6>[ 2.020974] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1509<6>[ 2.021007] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1510<6>[ 2.021040] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1511<6>[ 2.021068] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1512<3>[ 2.023292] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1513<6>[ 2.025379] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1514<6>[ 2.025416] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1515<6>[ 2.025447] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1516<6>[ 2.025478] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1517<6>[ 2.025938] c1 1 RNDIS_IPA module is loaded.
1518<6>[ 2.025998] c1 374 [WLAN] dhd_module_init_async in
1519<6>[ 2.026407] c1 374 [WLAN] found wifi platform device bcmdhd_wlan
1520<6>[ 2.027337] c1 374 [WLAN] Power-up adapter 'DHD generic adapter'
1521<6>[ 2.027353] c1 374 [WLAN] wifi_platform_set_power = 1
1522<4>[ 2.027385] c1 374 [WLAN] wlan-en-gpio gpio is now enabled, retry 0 time
1523<3>[ 2.027805] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1524<6>[ 2.027855] c0 1 [USB] android_probe: android_probe : init string : char_bridge:modem,tty,tty:autobot,tty:serial,tty:autobot,tty:acm
1525<6>[ 2.027866] c0 1 [USB] android_probe: android_probe : diag client string : diag
1526<6>[ 2.027874] c0 1 [USB] android_probe: android_probe : rmnet transports string : qti,bam2bam_ipa
1527<6>[ 2.028363] c0 1 file system registered
1528<6>[ 2.028416] c0 1 [USB] mbim_init: initialize 1 instances
1529<6>[ 2.028473] c0 1 [USB] mbim_init: Initialized 1 ports
1530<6>[ 2.029388] c0 1 [USB] serial_function_init: serial_function_init: serial_init_string char_bridge:modem,tty,tty:autobot,tty:serial,tty:autobot,tty:acm
1531<6>[ 2.030765] c0 1 [USB] rndis_qc_init: initialize rndis QC instance
1532<6>[ 2.030959] c0 1 Number of LUNs=8
1533<6>[ 2.030972] c0 1 Mass Storage Function, version: 2009/09/11
1534<6>[ 2.030980] c0 1 LUN: removable file: (no medium)
1535<6>[ 2.031038] c0 1 Number of LUNs=1
1536<6>[ 2.031082] c0 1 LUN: removable file: (no medium)
1537<6>[ 2.031088] c0 1 Number of LUNs=1
1538<6>[ 2.031314] c0 1 android_usb gadget: android_usb ready
1539<6>[ 2.031374] c0 1 [USB] android_probe: probe complete
1540<6>[ 2.032267] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1541<6>[ 2.032301] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1542<6>[ 2.032331] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1543<6>[ 2.032360] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1544<3>[ 2.034810] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1545<6>[ 2.035729] c2 1 [KEY] gpio_keys_setup_key, error=-524, debounce(20, 20)
1546<6>[ 2.035775] c0 0 [KEY] gpio_keys_gpio_isr, irq=354, gpio=40
1547<6>[ 2.035819] c2 1 [KEY] keycode = 116, gpio = 40, irq = 354
1548<6>[ 2.035833] c2 1 [KEY] gpio_keys_setup_key, error=-524, debounce(20, 20)
1549<6>[ 2.035872] c0 0 [KEY] gpio_keys_gpio_isr, irq=440, gpio=126
1550<6>[ 2.035884] c2 1 [KEY] keycode = 115, gpio = 126, irq = 440
1551<6>[ 2.035896] c2 1 [KEY] gpio_keys_setup_key, error=-524, debounce(20, 20)
1552<6>[ 2.035931] c0 0 [KEY] gpio_keys_gpio_isr, irq=435, gpio=121
1553<6>[ 2.036063] c2 1 [KEY] keycode = 114, gpio = 121, irq = 435
1554<6>[ 2.036063] c2 1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
1555<6>[ 2.037006] c2 1 [TP]:synaptics_rmi4_i2c_probe
1556<6>[ 2.037017] c2 1 [TP]:parse_dt
1557<6>[ 2.037065] c2 1 [TP]:parse_dt: irq_gpio = 125
1558<6>[ 2.037075] c2 1 [TP]:parse_dt: power_gpio = -1
1559<6>[ 2.037107] c2 1 [TP]:parse_dt: reset_gpio = 89
1560<6>[ 2.037136] c2 1 [TP]:parse_dt: switch_gpio = 84
1561<6>[ 2.037151] c2 1 [TP]: parse_config
1562<6>[ 2.037523] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1563<6>[ 2.037555] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1564<6>[ 2.037585] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1565<6>[ 2.037614] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1566<6>[ 2.038085] c2 1 [TP]: synaptics_rmi4_probe
1567<3>[ 2.039976] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1568<6>[ 2.041083] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1569<6>[ 2.041115] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1570<6>[ 2.041144] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1571<6>[ 2.041171] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1572<3>[ 2.043329] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1573<6>[ 2.067175] c0 1 [TP]:check_chip_exist: Synaptics chip exist
1574<6>[ 2.070364] c0 1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 2160 max y = 3840 max z = 255 Rx: 17 Tx: 30
1575<6>[ 2.070373] c0 1 [TP]:synaptics_rmi4_f12_init: Display resolution: 1440x2560
1576<6>[ 2.073384] c2 396 [KEY] gpio_keys_gpio_report_event: key 1-74, (40) changed to 0
1577<6>[ 2.073400] c2 396 [KEY] gpio_keys_gpio_report_event: key 1-73, (126) changed to 0
1578<6>[ 2.073411] c2 396 [KEY] gpio_keys_gpio_report_event: key 1-72, (121) changed to 0
1579<6>[ 2.079789] c0 1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2235544
1580<6>[ 2.080778] c0 1 [TP]:synaptics_rmi4_query_device: config_version: 504d450059464f00534841525000010000000000000000000000000000000000
1581<6>[ 2.081304] c0 1 input: synaptics_dsx as /devices/soc/757a000.i2c/i2c-6/6-0020/input/input7
1582<6>[ 2.081377] c0 1 [TP]:synaptics_rmi4_probe cover_setting_size = 6
1583<6>[ 2.081386] c0 1 [TP]:synaptics_rmi4_set_status: mode 0 (normal)
1584<6>[ 2.082356] c0 1 [TP]:synaptics_rmi4_probe glove mode default off
1585<6>[ 2.082540] c0 1 [TP]:synaptics_rmi4_probe: enable irq done
1586<6>[ 2.082703] c1 1 [TP]: synaptics_rmi4_probe: Done
1587<6>[ 2.082761] c1 1 [TP]:rmi4_fw_update_module_init: recovery mode
1588<6>[ 2.082830] c1 1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1971-01-11 21:38:40 UTC (32477920)
1589<6>[ 2.084959] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1590<6>[ 2.085015] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1591<6>[ 2.085057] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1592<6>[ 2.085096] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1593<3>[ 2.087799] c0 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1594<6>[ 2.088785] c0 1 [K] Success to create htc_pm_monitor_wq (0xffffffc0f2bba000).
1595<4>[ 2.089212] c0 1 [K][KTOP] Create HTC private workqueue(0xffffffc076b3b400)...
1596<4>[ 2.089225] c0 1 [K][KTOP] Success to create htc_kernel_top_monitor_wq (0xffffffc076b3b400).
1597<6>[ 2.089858] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1598<6>[ 2.089914] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1599<6>[ 2.089960] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1600<6>[ 2.090001] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1601<3>[ 2.092980] c1 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1602<6>[ 2.094612] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1603<6>[ 2.094650] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1604<6>[ 2.094680] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1605<6>[ 2.094708] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1606<3>[ 2.097091] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1607<6>[ 2.098785] c2 1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1608<6>[ 2.099069] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1609<6>[ 2.099249] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1610<6>[ 2.099422] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1611<6>[ 2.099593] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1612<6>[ 2.099761] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1613<6>[ 2.099932] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1614<6>[ 2.100143] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1615<6>[ 2.101848] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1616<6>[ 2.101886] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1617<6>[ 2.101916] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1618<6>[ 2.101945] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1619<3>[ 2.105395] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1620<3>[ 2.105591] c3 1 parse_cpu_levels: idx 1 545
1621<3>[ 2.105607] c3 1 parse_cpu_levels: idx 2 6022
1622<3>[ 2.105619] c3 1 parse_cpu_levels: idx 2 11499
1623<3>[ 2.105793] c3 1 parse_cpu_levels: idx 1 545
1624<3>[ 2.105805] c3 1 parse_cpu_levels: idx 2 6022
1625<3>[ 2.105816] c3 1 parse_cpu_levels: idx 2 11499
1626<6>[ 2.108425] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1627<6>[ 2.108497] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1628<6>[ 2.108561] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1629<6>[ 2.108622] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1630<3>[ 2.113623] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1631<6>[ 2.114370] c3 1 [FLT] qpnp_flash_led_probe: ++
1632<6>[ 2.114652] c3 1 [FLT] flash_strobe = 22
1633<6>[ 2.114666] c3 1 [FLT] backlight_callback_register: ++
1634<3>[ 2.114695] c3 1 qcom,qpnp-flash-led qpnp-flash-led-28: Unable to acquire pinctrl
1635<6>[ 2.115809] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
1636<6>[ 2.115832] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
1637<6>[ 2.115860] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
1638<6>[ 2.115878] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
1639<6>[ 2.115894] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
1640<6>[ 2.116015] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
1641<6>[ 2.116033] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
1642<6>[ 2.116049] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
1643<6>[ 2.116065] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
1644<6>[ 2.116081] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
1645<6>[ 2.116199] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
1646<6>[ 2.116216] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
1647<6>[ 2.116231] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
1648<6>[ 2.116246] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
1649<6>[ 2.116262] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
1650<6>[ 2.116374] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
1651<6>[ 2.116390] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
1652<6>[ 2.116406] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
1653<6>[ 2.116421] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
1654<6>[ 2.116436] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
1655<6>[ 2.116765] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
1656<6>[ 2.116783] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
1657<6>[ 2.116799] c2 1 [FLT] qpnp_flash_led_probe: attr name flash
1658<6>[ 2.116814] c2 1 [FLT] qpnp_flash_led_probe: attr name torch
1659<6>[ 2.116829] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
1660<6>[ 2.116845] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
1661<6>[ 2.116860] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
1662<6>[ 2.117078] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
1663<6>[ 2.117095] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
1664<6>[ 2.117111] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
1665<6>[ 2.117129] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
1666<6>[ 2.117145] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
1667<6>[ 2.117195] c2 1 [FLT] qpnp_flash_led_probe: --
1668<6>[ 2.117982] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1669<6>[ 2.118051] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1670<6>[ 2.118112] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1671<6>[ 2.118174] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1672<6>[ 2.119523] c1 54 mmc1: au : 8192 KB
1673<6>[ 2.119539] c1 54 mmc1: speed class type is CLASS 10
1674<3>[ 2.123051] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1675<6>[ 2.124516] c2 1 rmnet_ipa started initialization
1676<6>[ 2.124530] c2 1 IPA SSR support = True
1677<6>[ 2.124536] c2 1 IPA ipa-loaduC = True
1678<6>[ 2.124541] c2 1 IPA SG support = True
1679<6>[ 2.124975] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1680<6>[ 2.125010] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1681<6>[ 2.125037] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1682<6>[ 2.125062] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1683<3>[ 2.127458] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1684<6>[ 2.127563] c1 54 Set SD SDR104 state return : 0
1685<3>[ 2.128744] c3 1 ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
1686<3>[ 2.128755] c3 1 ipa ipa2_uc_state_check:301 uC is not loaded
1687<6>[ 2.129565] c3 1 rmnet_ipa completed initialization
1688<6>[ 2.130863] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1689<6>[ 2.130896] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1690<6>[ 2.130923] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1691<6>[ 2.130948] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1692<6>[ 2.131255] c1 54 mmc1: new ultra high speed SDR104 SDXC card at address aaaa
1693<6>[ 2.131588] c1 54 sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f2d7cd00)
1694<6>[ 2.131604] c1 54 sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f2d7cd08)
1695<6>[ 2.131745] c1 54 mmcblk1: mmc1:aaaa AGGCF 119 GiB
1696<3>[ 2.133008] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1697<6>[ 2.136233] c3 1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1698<6>[ 2.137606] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1699<6>[ 2.137640] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1700<6>[ 2.137667] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1701<6>[ 2.137693] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1702<3>[ 2.139769] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1703<6>[ 2.139953] c3 1 apc0_pwrcl_mem_acc_corner: disabling
1704<6>[ 2.139963] c3 1 apc1_perfcl_mem_acc_corner: disabling
1705<6>[ 2.139969] c3 1 apcc_l3_mem_acc_corner: disabling
1706<6>[ 2.139976] c3 1 gfx_mem_acc_corner: disabling
1707<6>[ 2.139981] c3 1 kryo0-retention: disabling
1708<6>[ 2.139989] c3 1 kryo1-retention: disabling
1709<6>[ 2.140082] c3 1 gdsc_mmagic_bimc: disabling
1710<6>[ 2.140173] c3 1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1711<3>[ 2.140404] c0 47 smd_channel_probe_now: allocation table not initialized
1712<4>[ 2.140407] c3 1 ------------[ cut here ]------------
1713<4>[ 2.140421] c3 1 WARNING: CPU: 3 PID: 1 at ../drivers/regulator/core.c:2017 _regulator_disable+0x38/0x110()
1714<4>[ 2.140427] c3 1 unbalanced disables for pm8994_l14
1715<4>[ 2.140432] c3 1 Modules linked in:
1716<4>[ 2.140442] c3 1 CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.63-BeyondStockᵀᴹ-Recovery-pme-Oreo-gad83436-dirty #2
1717<4>[ 2.140448] c3 1 Hardware name: HTC Corporation. MSM8996v3 PME PVT (DT)
1718<0>[ 2.140453] c3 1 Call trace:
1719<4>[ 2.140462] c3 1 [<ffffffc000089ec0>] dump_backtrace+0x0/0x158
1720<4>[ 2.140468] c3 1 [<ffffffc00008a02c>] show_stack+0x14/0x1c
1721<4>[ 2.140476] c3 1 [<ffffffc000f447fc>] dump_stack+0x84/0xa8
1722<4>[ 2.140483] c3 1 [<ffffffc0000a4fc4>] warn_slowpath_common+0x8c/0xb4
1723<4>[ 2.140489] c3 1 [<ffffffc0000a5054>] warn_slowpath_fmt+0x68/0x88
1724<4>[ 2.140495] c3 1 [<ffffffc000551778>] _regulator_disable+0x38/0x110
1725<4>[ 2.140500] c3 1 [<ffffffc00055188c>] regulator_disable+0x3c/0x7c
1726<4>[ 2.140507] c3 1 [<ffffffc0005537d4>] regulator_proxy_consumer_remove+0x24/0x108
1727<4>[ 2.140513] c3 1 [<ffffffc0015cd0a0>] regulator_proxy_consumer_remove_all+0x70/0x98
1728<4>[ 2.140519] c3 1 [<ffffffc000082af0>] do_one_initcall+0x1c4/0x1e0
1729<4>[ 2.140526] c3 1 [<ffffffc001596c80>] kernel_init_freeable+0x1c0/0x278
1730<4>[ 2.140534] c3 1 [<ffffffc000f3d59c>] kernel_init+0x10/0xe0
1731<4>[ 2.140539] c3 1 ---[ end trace ecd540a81f6bd54a ]---
1732<3>[ 2.140544] c3 1 regulator_proxy_consumer_remove: regulator_disable failed, rc=-5
1733<6>[ 2.140710] c3 1 clock_late_init: Removing enables held for handed-off clocks
1734<6>[ 2.141639] c1 54 mmcblk1: p1 p2
1735<6>[ 2.143463] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1736<6>[ 2.143504] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1737<6>[ 2.143532] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1738<6>[ 2.143557] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1739<6>[ 2.144297] c3 1 ALSA device list:
1740<6>[ 2.144304] c3 1 No soundcards found.
1741<3>[ 2.144367] c3 1 Warning: unable to open an initial console.
1742<3>[ 2.145534] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1743<6>[ 2.230361] c0 374 [WLAN] wifi_platform_bus_enumerate device present 1
1744<6>[ 2.240301] c0 54 Set SD SDR104 state return : 0
1745<6>[ 2.272988] c0 374 PCI host bridge /soc/qcom,pcie@00600000 ranges:
1746<6>[ 2.273019] c0 374 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1747<6>[ 2.273063] c0 374 IO 0x0c200000..0x0c2fffff -> 0x0c200000
1748<6>[ 2.273090] c0 374 MEM 0x0c300000..0x0cffffff -> 0x0c300000
1749<6>[ 2.283540] c0 374 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1750<6>[ 2.283568] c0 374 pci_bus 0000:00: root bus resource [bus 00-ff]
1751<6>[ 2.283592] c0 374 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1752<6>[ 2.283612] c0 374 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
1753<7>[ 2.283774] c0 374 pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
1754<7>[ 2.284063] c0 374 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
1755<3>[ 2.284209] c0 374 pci 0000:00:00.0: IOMMU is currently not supported for PCI
1756<7>[ 2.284446] c0 374 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
1757<3>[ 2.284605] c0 374 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1758<6>[ 2.285240] c0 374 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1759<7>[ 2.286406] c0 374 pci 0000:01:00.0: [14e4:4415] type 00 class 0x028000
1760<7>[ 2.287816] c0 374 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
1761<7>[ 2.288243] c0 374 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
1762<3>[ 2.289000] c0 374 pci 0000:01:00.0: IOMMU is currently not supported for PCI
1763<7>[ 2.291015] c0 374 pci 0000:01:00.0: supports D1 D2
1764<7>[ 2.291030] c0 374 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1765<7>[ 2.292095] c0 374 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
1766<6>[ 2.292411] c0 374 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
1767<6>[ 2.292438] c0 374 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
1768<6>[ 2.292624] c0 374 pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
1769<6>[ 2.292956] c0 374 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
1770<6>[ 2.293331] c0 374 pci 0000:00:00.0: PCI bridge to [bus 01]
1771<6>[ 2.293564] c0 374 pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
1772<6>[ 2.294924] c0 374 [WLAN] dhdpcie_chipmatch: WIFI_OTP: OTP is NOT empty
1773<6>[ 2.294946] c0 374 [WLAN] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4415(good PCI location)
1774<6>[ 2.294964] c0 374 [WLAN] dhdpcie_init: found adapter info 'DHD generic adapter'
1775<3>[ 2.294981] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 3 size 139264
1776<4>[ 2.295009] c0 374 [WLAN] alloc static buf at ffffffc031e40000!
1777<3>[ 2.295023] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 4 size 0
1778<3>[ 2.295043] c0 374 [WLAN] htc_wifi_get_irq_gpio: irq_num 436
1779<3>[ 2.295057] c0 374 [WLAN] htc_wifi_get_irq_gpio: flags 414
1780<6>[ 2.295071] c0 374 [WLAN] wifi_platform_get_irq_number: got irq 436 flags 414
1781<6>[ 2.295265] c0 374 pcieh 0000:01:00.0: enabling device (0000 -> 0002)
1782<6>[ 2.298024] c0 374 [WLAN] dhdpcie_bus_attach: bar0_addr 0x0x000000000c800000 bar1_addr 0x0x000000000c400000
1783<6>[ 2.301059] c0 374 [WLAN] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
1784<3>[ 2.301078] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 7 size 25024
1785<3>[ 2.301095] c0 374 [WLAN] htc_wifi_mem_prealloc: request DHD_INFO size(25024) is bigger than static size(24576).
1786<6>[ 2.301111] c0 374 [WLAN] wifi_platform_prealloc: failed to alloc static mem section 7
1787<6>[ 2.301134] c0 374 [WLAN] wifi_platform_get_mac_addr
1788<6>[ 2.301175] c0 374 [WLAN] htc_wifi_get_mac_addr: 80:7a:bf:3b:XX:XX
1789<3>[ 2.301287] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 0 size 1304
1790<6>[ 2.301891] c0 374 [WLAN] CFG80211-LOG) wl_setup_wiphy : Registering Vendor80211
1791<4>[ 2.302664] c0 374 wl_create_event_handler(): thread:wl_event_handler:1d7 started
1792<4>[ 2.303060] c0 374 dhd_attach(): thread:dhd_watchdog_thread:1d8 started
1793<4>[ 2.303209] c0 374 dhd_attach(): thread:dhd_rpm_state_thread:1d9 started
1794<6>[ 2.303229] c0 374 dhdpcie_interrupt_set_cpucore: set: 0, pcie->irq=35, oobirq=0
1795<6>[ 2.303262] c0 374 [WLAN] dhd_deferred_work_init: work queue initialized
1796<6>[ 2.303276] c0 374 [WLAN] DHD LOAD BALANCING Enabled
1797<6>[ 2.303290] c0 374 [WLAN] dhd_lb_set_default_cpus: set rx napi cpu to core0
1798<6>[ 2.303834] c0 374 [WLAN] Dongle Host Driver, version 1.363.77.18 (r620987)
1799<6>[ 2.303834] c0 374 Compiled in drivers/net/wireless/bcmdhd on Mar 8 2018 at 16:25:32
1800<6>[ 2.304675] c0 374 [WLAN] Register interface [wlan0] MAC: 7f:85:40:c4:57:24
1801<6>[ 2.304675] c0 374
1802<6>[ 2.304736] c2 471 [WLAN] CFG80211-LOG) wl_event_handler : was terminated
1803<4>[ 2.304798] c0 374 wl_destroy_event_handler(): thread:wl_event_handler:1d7 terminated OK
1804<6>[ 2.304819] c0 374 [WLAN] dhd_wl_ioctl: returning as busstate=0
1805<6>[ 2.304836] c0 374 [WLAN] dhd_bus_devreset: == Power OFF ==
1806<6>[ 2.304871] c0 374 [WLAN] dhdpcie_oob_intr_unregister: irq is not registered
1807<6>[ 2.304907] c0 374 [WLAN] dhd_clear: Delete sta list before clear
1808<6>[ 2.317099] c0 374 [WLAN] dhd_bus_devreset: WLAN OFF Done
1809<6>[ 2.317111] c0 374 [WLAN] wifi_platform_set_power = 0
1810<4>[ 2.317145] c0 374 [WLAN] wlan-en-gpio gpio is now disabled, retry 0 time
1811<6>[ 2.317355] c0 374 [WLAN] dhd_module_init_async out, err=0
1812<6>[ 2.317816] c3 1 Freeing unused kernel memory: 616K
1813<6>[ 2.317869] c3 1 Freeing alternatives memory: 112K
1814<4>[ 2.317884] c3 1 This architecture does not have kernel memory protection.
1815<6>[ 2.318884] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
1816<6>[ 2.318938] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
1817<6>[ 2.318982] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
1818<6>[ 2.319026] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
1819<13>[ 2.319946] c3 1 init: init first stage started!
1820<3>[ 2.321608] c0 374 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1821<7>[ 2.325333] c3 1 SELinux: 2048 avtab hash slots, 6814 rules.
1822<7>[ 2.329382] c3 1 SELinux: 2048 avtab hash slots, 6814 rules.
1823<7>[ 2.329415] c3 1 SELinux: 1 users, 2 roles, 668 types, 0 bools, 1 sens, 1024 cats
1824<7>[ 2.329433] c3 1 SELinux: 64 classes, 6814 rules
1825<6>[ 2.330940] c3 1 SELinux: Class can_socket not defined in policy.
1826<6>[ 2.330951] c3 1 SELinux: the above unknown classes and permissions will be denied
1827<7>[ 2.330972] c3 1 SELinux: Completing initialization.
1828<7>[ 2.330976] c3 1 SELinux: Setting up existing superblocks.
1829<7>[ 2.330987] c3 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1830<7>[ 2.331005] c3 1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1831<7>[ 2.331613] c3 1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
1832<7>[ 2.331624] c3 1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
1833<7>[ 2.331641] c3 1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1834<7>[ 2.352543] c3 1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1835<7>[ 2.352561] c3 1 SELinux: initialized (dev tracefs, type tracefs), uses genfs_contexts
1836<7>[ 2.370426] c3 1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1837<7>[ 2.370440] c3 1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1838<7>[ 2.370447] c3 1 SELinux: initialized (dev aio, type aio), not configured for labeling
1839<7>[ 2.370456] c3 1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1840<7>[ 2.370472] c3 1 SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
1841<7>[ 2.370483] c3 1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1842<7>[ 2.370549] c3 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1843<7>[ 2.370567] c3 1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1844<5>[ 2.374522] c2 1 audit: type=1403 audit(32477920.790:2): policy loaded auid=4294967295 ses=4294967295
1845<13>[ 2.375001] c2 1 init: (Initializing SELinux non-enforcing took 0.05s.)
1846<13>[ 2.376731] c2 1 init: init second stage started!
1847<13>[ 2.379741] c2 1 init: Running restorecon...
1848<6>[ 2.393467] c3 368 [S_HUB] irq_hndl: gpio_mcu_status_level:1
1849<6>[ 2.393491] c3 368 [S_HUB] irq_hndl: skip, s_mcu_state:0, gpio_mcu_status_level:1
1850<3>[ 2.393503] c1 167 [S_HUB] mcu_state_enter_dload[585]: set mcu to SHUB mode
1851<6>[ 2.394857] c1 167 [S_HUB] rst_hub: gpio_rst = 0
1852<6>[ 2.406726] c1 167 [S_HUB] rst_hub: gpio_rst = 1
1853<11>[ 2.418043] c2 1 init: waitpid failed: No child processes
1854<13>[ 2.418392] c2 1 init: (Loading properties from /default.prop took 0.00s.)
1855<11>[ 2.418826] c2 1 init: /init.rc: 13: invalid keyword 'setcon'
1856<11>[ 2.418927] c2 1 init: /init.rc: 61: invalid keyword 'load_all_props'
1857<11>[ 2.419016] c2 1 init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
1858<13>[ 2.419125] c2 1 init: (Parsing /init.recovery.usb.rc took 0.00s.)
1859<13>[ 2.419169] c2 1 init: (Parsing /init.recovery.service.rc took 0.00s.)
1860<13>[ 2.419251] c2 1 init: (Parsing /init.recovery.vold_decrypt.keymaster-3-0.rc took 0.00s.)
1861<13>[ 2.419295] c2 1 init: (Parsing /init.recovery.vold_decrypt.hwservicemanager.rc took 0.00s.)
1862<13>[ 2.419347] c2 1 init: (Parsing /init.recovery.vold_decrypt.qseecomd.rc took 0.00s.)
1863<13>[ 2.419361] c2 1 init: (Parsing /init.recovery.vold_decrypt.rc took 0.00s.)
1864<13>[ 2.419454] c2 1 init: (Parsing init.recovery.htc_decrypt.rc took 0.00s.)
1865<13>[ 2.419468] c2 1 init: (Parsing /init.recovery.htc_pme.rc took 0.00s.)
1866<13>[ 2.419480] c2 1 init: (Parsing /init.rc took 0.00s.)
1867<5>[ 2.419571] c2 1 audit: type=1400 audit(32477920.833:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1868<13>[ 2.419634] c2 1 init: Starting service 'ueventd'...
1869<13>[ 2.419923] c2 1 init: Waiting for /dev/.coldboot_done...
1870<13>[ 2.421163] c3 475 ueventd: ueventd started!
1871<6>[ 2.438650] c2 368 [S_HUB] irq_hndl: gpio_mcu_status_level:0
1872<6>[ 2.546959] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
1873<6>[ 2.546974] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
1874<6>[ 2.546980] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
1875<6>[ 2.546986] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
1876<6>[ 2.546991] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
1877<6>[ 2.546997] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
1878<6>[ 2.547002] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
1879<6>[ 2.547007] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
1880<6>[ 2.646993] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
1881<6>[ 2.647008] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
1882<6>[ 2.647014] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
1883<6>[ 2.647021] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
1884<6>[ 2.647027] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
1885<6>[ 2.647033] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
1886<6>[ 2.647039] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
1887<6>[ 2.647045] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
1888<5>[ 2.774013] c3 475 audit: type=1400 audit(32477921.190:4): avc: denied { relabelfrom } for pid=475 comm="ueventd" name="rmi0" dev="tmpfs" ino=1646 scontext=u:r:ueventd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1889<5>[ 2.774040] c3 475 audit: type=1400 audit(32477921.190:5): avc: denied { relabelto } for pid=475 comm="ueventd" name="rmi0" dev="tmpfs" ino=1646 scontext=u:r:ueventd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1890<13>[ 2.786126] c3 475 ueventd: Coldboot took 0.36s.
1891<13>[ 2.794420] c0 1 init: Waiting for /dev/.coldboot_done took 0.37s.
1892<7>[ 2.798713] c0 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1893<5>[ 2.799113] c0 1 audit: type=1400 audit(32477921.213:6): avc: denied { sys_module } for pid=1 comm="init" capability=16 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
1894<4>[ 2.799715] c0 1 texfat: disagrees about version of symbol module_layout
1895<11>[ 2.799846] c0 1 init: finit_module for "/system/lib/modules/texfat.ko" failed: Exec format error
1896<7>[ 2.801045] c3 1 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1897<7>[ 2.801432] c3 1 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1898<6>[ 2.801508] c3 1 [USB] enable_store: enable_store: soft disconnect : 0
1899<3>[ 2.801516] c3 1 [USB] enable_store: android_usb: already disabled
1900<6>[ 2.801666] c3 1 [USB] functions_store: functions_store: switch function to adb
1901<11>[ 2.801739] c3 1 init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
1902<11>[ 2.801750] c3 1 init: write: cannot expand '${ro.product.model}'
1903<13>[ 2.801997] c3 1 init: (Loading properties from /system/build.prop took 0.00s.)
1904<13>[ 2.802023] c3 1 init: (Loading properties from /vendor/build.prop took 0.00s.)
1905<13>[ 2.802047] c3 1 init: (Loading properties from /factory/factory.prop took 0.00s.)
1906<11>[ 2.802125] c3 1 init: /recovery not specified in fstab
1907<13>[ 2.802158] c3 1 init: (Loading properties from /data/local.prop took 0.00s.)
1908<11>[ 2.802182] c3 1 init: Unable to open persistent property directory "/data/property": No such file or directory
1909<6>[ 2.818533] c1 1 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
1910<7>[ 2.818589] c1 1 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
1911<11>[ 2.821630] c1 1 init: Found bootmid 2PS620000 setting build properties for pme device
1912<13>[ 2.822548] c1 1 init: Starting service 'set_permissive'...
1913<13>[ 2.823133] c1 1 init: Starting service 'recovery'...
1914<13>[ 2.823840] c1 1 init: Starting service 'chargeled'...
1915<5>[ 2.823883] c2 481 random: permissive.sh urandom read with 97 bits of entropy available
1916<6>[ 2.824818] c1 1 [USB] enable_store: enable_store: soft disconnect : 0
1917<13>[ 2.824907] c1 1 init: Starting service 'adbd'...
1918<6>[ 2.825696] c1 1 [USB] enable_store: enable_store: soft disconnect : 1
1919<14>[ 2.827980] c0 483 [CHRG_LED]: void update_led(int): is RGB LED='1'
1920<14>[ 2.828134] c0 483 [CHRG_LED]: void update_led(int): setting charging status '2'
1921<6>[ 2.828183] c0 483 [LED] led_multi_color_store , ModeRGB = 1c80000
1922<6>[ 2.828200] c0 483 [LED] led_multi_color_store , ModeRGB = 1c80000
1923<6>[ 2.828253] c0 374 [LED] led_multicolor_work_func , Mode = 1
1924<6>[ 2.828273] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 0 status: 0
1925<6>[ 2.828385] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 0 status: 0
1926<6>[ 2.828486] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 1 status: 0
1927<6>[ 2.832713] c1 486 read descriptors
1928<6>[ 2.832755] c1 486 read strings
1929<5>[ 2.833102] c2 485 audit: type=1400 audit(32477921.246:7): avc: denied { write } for pid=485 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1930<13>[ 2.835072] c2 1 init: Service 'set_permissive' (pid 481) exited with status 0
1931<6>[ 2.839308] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 0 status: 0
1932<6>[ 2.846971] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:69
1933<6>[ 2.846983] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
1934<6>[ 2.846989] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:69
1935<6>[ 2.846995] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
1936<6>[ 2.847001] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:69
1937<6>[ 2.847006] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
1938<6>[ 2.847011] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:69
1939<6>[ 2.847016] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
1940<6>[ 2.853130] c3 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
1941<6>[ 2.853145] c3 482 mdss_fb_set_backlight: defer backlight value 4095
1942<11>[ 2.853961] c1 1 init: avc: denied { set } for property=twrp.crash_counter pid=482 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
1943<6>[ 2.855173] c3 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
1944<6>[ 2.855185] c3 482 mdss_fb_set_backlight: defer backlight value 4095
1945<6>[ 2.855940] c3 482 mdss_fb_set_backlight: defer backlight value 4095
1946<6>[ 2.866667] c1 38 [cap] cypress_start_up_update_func: No Firmware file
1947<6>[ 2.872808] c3 482 [cap] fb_notifier_callback, event = 16
1948<6>[ 2.872810] c3 482 [cap] cypress_cap_early_suspend
1949<6>[ 2.872817] c3 482 [cap] cypress_set_sleep_mode: 1
1950<6>[ 2.873331] c2 482 [cap] cypress_cap_pinctrl_select: set to 0
1951<6>[ 2.873422] c2 482 [TP]:fb_notifier_callback, event 16
1952<6>[ 2.873423] c2 482 [TP]:fb_notifier_callback: ignore first boot:2
1953<6>[ 2.873506] c3 482 mdss_fb_set_backlight: defer backlight value 0
1954<6>[ 2.873552] c3 482 fb_event_callback: fb0, event=9, blank=4
1955<6>[ 2.873554] c3 482 [cap] fb_notifier_callback, event = 9
1956<6>[ 2.873558] c3 482 [BATT] fb_notifier_callback-> display is Off
1957<6>[ 2.873558] c3 482 [TP]:fb_notifier_callback, event 9
1958<6>[ 2.873560] c3 482 [TP]:fb_notifier_callback: ignore first boot:1
1959<6>[ 2.873613] c3 482 [cap] fb_notifier_callback, event = 16
1960<6>[ 2.873614] c3 482 [TP]:fb_notifier_callback, event 16
1961<6>[ 2.873617] c3 482 [S_HUB] [TP] tp_st: status = 0
1962<6>[ 2.938254] c0 0 [USB] suspend
1963<6>[ 2.949766] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:46
1964<6>[ 2.949772] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
1965<6>[ 2.949777] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:46
1966<6>[ 2.949781] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
1967<6>[ 2.949786] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:46
1968<6>[ 2.949790] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
1969<6>[ 2.949795] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:46
1970<6>[ 2.949799] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
1971<6>[ 3.230182] c3 55 BATTCHG_SUSPEND: BATTCHG_USER_EN_VOTER,1 voting on of val=1
1972<6>[ 3.259781] c0 0 [USB] reset
1973<6>[ 3.270840] c0 0 [USB] HIGHSPEED
1974<4>[ 3.339752] c0 0 [USB] first_dt_w_length = 64
1975<6>[ 3.339953] c0 47 [USB] android_work : sw_suspended 0 suspended 0 config 0,connect2pc 0
1976<6>[ 3.339954] c0 47 [USB] android_work : sw_connected 0 connected 1 last_uevent 0
1977<6>[ 3.340193] c0 47 [USB] android_work: android_work: sent uevent USB_STATE=CONNECTED
1978<6>[ 3.340241] c0 47 [USB] android_work: set usb_connect2pc = 1
1979<6>[ 3.343589] c0 0 [USB] reset
1980<6>[ 3.351043] c0 0 [USB] HIGHSPEED
1981<6>[ 3.447941] c0 0 [USB] check_MAC_or_LINUX: Re detect as OS_LINUX
1982<4>[ 3.448437] c0 0 [USB] first_string_w_length = 255
1983<6>[ 3.449557] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1984<6>[ 3.449679] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
1985<6>[ 3.449851] c0 47 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
1986<6>[ 3.449860] c0 47 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
1987<6>[ 3.450141] c0 47 USB_ICL: PSY_ICL_VOTER,0 voting on of val=500
1988<6>[ 3.450147] c0 47 USB_ICL: effective vote is now 500 voted by PSY_ICL_VOTER,0
1989<6>[ 3.450153] c0 47 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
1990<6>[ 3.450159] c0 47 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
1991<6>[ 3.450163] c0 47 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
1992<6>[ 3.450347] c1 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(32477919876) diff(1881818492) count_same_dischg(0) limit_iusb(0)
1993<6>[ 3.450443] c0 47 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
1994<6>[ 3.450477] c0 47 SMBCHG: get_parallel_psy: parallel charger not found
1995<6>[ 3.450652] c0 47 [USB] android_work : sw_suspended 0 suspended 0 config 1,connect2pc 1
1996<6>[ 3.450653] c0 47 [USB] android_work : sw_connected 1 connected 1 last_uevent 1
1997<6>[ 3.455059] c3 368 [S_HUB] irq_hndl: INT_st(1, 2, 3, 4) = (0x0, 0x20, 0x0, 0x0), err_st = 0x0, bch_st = 0x0
1998<6>[ 3.455064] c3 368 [S_HUB] irq_hndl: CW_MCU_INT_BIT_SHUB_BOOTUP
1999<6>[ 3.455123] c0 376 [S_HUB] en_shub_init[537]: s_mcu_state enter MCU_STATE_SHUB_INIT at (1971-01-11 21:38:41.872301959 UTC)
2000<6>[ 3.456714] c3 368 [S_HUB] irq_hndl: INT_st(1, 2, 3, 4) = (0x0, 0x0, 0x0, 0x0), err_st = 0x0, bch_st = 0x0
2001<6>[ 3.465485] c1 167 [OHIO] ohio_work_func : detect cable insertion/remove, cable_connected = 1
2002<6>[ 3.484103] c0 482 [TP]:[SensorHub] Switch touch i2c to CPU
2003<6>[ 3.484237] c0 482 mdss_fb_set_backlight: defer backlight value 2039
2004<6>[ 3.484255] c0 482 fb_event_callback: fb0, event=9, blank=0
2005<6>[ 3.484270] c0 482 [cap] fb_notifier_callback, event = 9
2006<6>[ 3.484272] c0 482 [cap] cypress_cap_late_resume
2007<6>[ 3.484274] c0 482 [cap] cypress_cap_pinctrl_select: set to 1
2008<6>[ 3.484404] c0 482 [cap] cypress_set_sleep_mode: 0
2009<6>[ 3.485279] c0 482 [BATT] fb_notifier_callback-> display is On
2010<6>[ 3.485279] c0 482 [TP]:fb_notifier_callback, event 9
2011<6>[ 3.491268] c3 491 mdss_mdp_splash_cleanup: Release cont_splash buffer [c0000000, 3000000, ffffff8003891000]
2012<6>[ 3.497546] c0 167 [OHIO] ohio_main_process: smart_5v enabled
2013<6>[ 3.497814] c0 167 [OHIO] ohio_main_process: UFP(8) FW version 0x13
2014<6>[ 3.504335] c0 47 [USB] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2015<6>[ 3.509270] c0 491 mdss_mdp_cmd_panel_on: INTR2 Status = 0x11000110, 5
2016<6>[ 3.509634] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x11000110, 4
2017<6>[ 3.509716] c1 491 mdss_fb_update_backlight: bl_level 2039 => 2039 / 0 => -1
2018<6>[ 3.526425] c0 482 [cap] fb_notifier_callback, event = 1
2019<6>[ 3.526429] c0 482 [TP]:fb_notifier_callback, event 1
2020<6>[ 3.531763] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x0, 3
2021<6>[ 3.531830] c0 482 [cap] fb_notifier_callback, event = 1
2022<6>[ 3.531832] c0 482 [TP]:fb_notifier_callback, event 1
2023<6>[ 3.532015] c0 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
2024<6>[ 3.584423] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x11000100, 2
2025<6>[ 3.584508] c2 482 [cap] fb_notifier_callback, event = 1
2026<6>[ 3.584513] c2 482 [TP]:fb_notifier_callback, event 1
2027<5>[ 3.584988] c2 482 audit: type=1400 audit(32477922.000:8): avc: denied { write } for pid=482 comm="recovery" name="etc" dev="rootfs" ino=15460 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2028<5>[ 3.585008] c2 482 audit: type=1400 audit(32477922.000:9): avc: denied { add_name } for pid=482 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2029<5>[ 3.585032] c2 482 audit: type=1400 audit(32477922.000:10): avc: denied { create } for pid=482 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
2030<6>[ 3.611753] c1 167 [OHIO] cc status 0x40
2031<6>[ 3.657427] c0 376 [S_HUB] Firmware Architecture version 255, Sense version 80, Cywee lib version 6, Water number 86, Active Engine 1, Project Mapping 9
2032<6>[ 3.658080] c0 376 [S_HUB] Jenkins build number 599, Build time(hh:mm) 18:17, CW branch 5, CW mcu type 1
2033<6>[ 3.659793] c1 376 [S_HUB] Sensor hw_id, acc = 18, mag = 20, gyro = 18
2034<6>[ 3.659833] c0 482 EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts:
2035<7>[ 3.659874] c0 482 SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr
2036<6>[ 3.659907] c0 482 SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
2037<6>[ 3.660407] c1 376 [S_HUB] Set g-sensor kvalue (x, y, z) = (0x3, 0xf4, 0xf2)
2038<6>[ 3.661575] c1 376 [S_HUB] Set light-sensor kvalue is 2 93, gvalue is 3 fa
2039<6>[ 3.662218] c1 376 [S_HUB] set proximity-sensor kvalue is 2a 0 14 0, ps_thd_add is 28
2040<6>[ 3.662236] c1 376 [S_HUB] Sensor calibration matrix is (gs 1 gy 1 ls 1 bs 0)
2041<4>[ 3.662251] c1 376 [S_HUB] [TP] set_tp_comb: unexpected combination = 255
2042<6>[ 3.662829] c1 376 [S_HUB] [TP] set_tp_comb: status = 0
2043<6>[ 3.662846] c1 376 [S_HUB] restore_st: set ges_mot param = (0x0, 0x0, 0x0, 0x0)
2044<6>[ 3.664622] c0 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
2045<4>[ 3.668123] c0 490 mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for mdp_event_client
2046<4>[ 3.668145] c0 490 mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for mdp_event_client<5>[ 3.689480] c0 0 random: nonblocking pool is initialized
2047<6>[ 3.691326] c0 482 EXT4-fs (mmcblk0p62): recovery complete
2048<6>[ 3.691513] c0 482 EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
2049<7>[ 3.691712] c0 482 SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
2050<6>[ 3.693950] c3 376 [S_HUB] en_dl_mode(8386): ramdump dbg mode is disabled, set hub reboot state to MCU_STATE_NORMAL
2051<6>[ 3.696602] c3 376 [S_HUB] en_shub_run[554]: s_mcu_state enter MCU_STATE_SHUB_RUN at (1971-01-11 21:38:42.030371878 UTC)
2052<6>[ 3.732425] c0 482 EXT4-fs (mmcblk0p64): recovery complete
2053<6>[ 3.732658] c0 482 EXT4-fs (mmcblk0p64): mounted filesystem with ordered data mode. Opts:
2054<7>[ 3.732685] c0 482 SELinux: initialized (dev mmcblk0p64, type ext4), uses xattr
2055<6>[ 3.746196] c0 482 EXT4-fs (mmcblk0p64): mounted filesystem with ordered data mode. Opts:
2056<7>[ 3.746229] c0 482 SELinux: initialized (dev mmcblk0p64, type ext4), uses xattr
2057<6>[ 3.771896] c3 482 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
2058<7>[ 3.771922] c3 482 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
2059<6>[ 3.777502] c3 482 SELinux: Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).
2060<6>[ 3.778259] c3 482 SELinux: Context u:object_r:hostapd_socket:s0 is not valid (left unmapped).
2061<6>[ 3.780291] c3 482 SELinux: Context u:object_r:reboot_data_file:s0 is not valid (left unmapped).
2062<6>[ 3.842765] c0 482 EXT4-fs (mmcblk0p42): mounted filesystem with ordered data mode. Opts:
2063<7>[ 3.842814] c0 482 SELinux: initialized (dev mmcblk0p42, type ext4), uses xattr
2064<6>[ 3.842849] c0 482 SELinux: Context u:object_r:htc_ebdlogd_file:s0 is not valid (left unmapped).
2065<6>[ 3.870188] c1 482 EXT4-fs (mmcblk0p53): recovery complete
2066<6>[ 3.871177] c1 482 EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts:
2067<7>[ 3.871233] c1 482 SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr
2068<6>[ 3.871278] c1 482 SELinux: Context u:object_r:carrier_file:s0 is not valid (left unmapped).
2069<6>[ 3.889201] c1 482 EXT4-fs (mmcblk0p66): mounted filesystem with ordered data mode. Opts:
2070<7>[ 3.889260] c1 482 SELinux: initialized (dev mmcblk0p66, type ext4), uses xattr
2071<4>[ 3.904604] c0 482 EXT4-fs (mmcblk0p65): warning: maximal mount count reached, running e2fsck is recommended
2072<6>[ 3.905251] c0 482 EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
2073<7>[ 3.905297] c0 482 SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
2074<6>[ 3.921304] c3 482 EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts:
2075<7>[ 3.921358] c3 482 SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr
2076<3>[ 3.959496] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60992) failed
2077<3>[ 3.959531] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60993) failed
2078<3>[ 3.959554] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60994) failed
2079<3>[ 3.959576] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60995) failed
2080<3>[ 3.959597] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60996) failed
2081<3>[ 3.959617] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60997) failed
2082<3>[ 3.959638] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60998) failed
2083<3>[ 3.959658] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60999) failed
2084<3>[ 3.959678] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 61000) failed
2085<3>[ 3.959698] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 61001) failed
2086<4>[ 3.960011] c0 482 FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
2087<7>[ 3.960213] c0 482 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
2088<6>[ 4.051900] c1 376 [OHIO] >>Hard Reset
2089<6>[ 4.074046] c2 376 Set SD SDR104 state return : 0
2090<6>[ 4.486762] c0 490 hw_vsync_handler: count=0
2091<6>[ 4.486813] c0 490 hw_vsync_handler: count=1
2092<6>[ 4.490803] c0 0 hw_vsync_handler: count=2
2093<6>[ 4.576871] c0 376 Set SD SDR104 state return : 0
2094<6>[ 5.233677] c3 55 of_batterydata_get_best_profile: Find batterydata path: qcom,pme-id1-batterydata, id_ohm=11237, raw_min=0, raw_max=22000.
2095<6>[ 5.239559] c3 55 BATTCHG_SUSPEND: BATTCHG_USER_EN_VOTER,1 voting off of val=0
2096<6>[ 5.244393] c3 55 FG: fg_batt_profile_init: Battery SOC: 100, V: 4328130uV
2097<6>[ 5.244408] c3 55 [BATT] Probe process: (1, 3)
2098<6>[ 5.244425] c3 55 [BATT] htc_battery_probe_process: catch name pme_id1, set batt id=1
2099<6>[ 5.244430] c3 55 [BATT] Probe process done.
2100<6>[ 5.244550] c3 338 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 voting off of val=0
2101<6>[ 5.244557] c3 338 BATTCHG_SUSPEND: effective vote is now 0 voted by BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0
2102<6>[ 5.244619] c3 338 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2103<7>[ 5.244683] c1 376 [BATT] batt_worker: total_time since last batt update = 14316262896 ms.
2104<6>[ 5.245053] c3 338 of_batterydata_get_best_profile: Find batterydata path: qcom,pme-id1-batterydata, id_ohm=11237, raw_min=0, raw_max=22000.
2105<6>[ 5.245115] c3 338 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=500
2106<6>[ 5.247011] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
2107<6>[ 5.247023] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2108<6>[ 5.247030] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
2109<6>[ 5.247035] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2110<6>[ 5.247041] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
2111<6>[ 5.247046] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2112<6>[ 5.247051] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
2113<6>[ 5.247056] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2114<6>[ 5.269217] c1 376 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 1451610001, g_overheat_55_sec = 0, g_total_level_raw = 7795, g_batt_cycle_checksum = 1451617796
2115<6>[ 5.269240] c1 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
2116<3>[ 5.269279] c1 376 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:32477923, store_time=0, batt_temp=405, store_temp=252645135, consistent_flag=0 at 5269271199 (1971-01-11 21:38:43.603046722 UTC)
2117<6>[ 5.269296] c1 376 [BATT] pre_level=100,pre_raw_level=100,pre_five_digit=10,pre_chg_src=0
2118<6>[ 5.269308] c1 376 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100
2119<7>[ 5.269318] c1 376 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
2120<6>[ 5.269327] c1 376 ignore the fist time on boot.
2121<6>[ 5.269393] c1 38 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2122<6>[ 5.269406] c1 38 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2123<6>[ 5.269514] c1 38 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
2124<6>[ 5.269523] c1 38 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
2125<6>[ 5.269533] c1 38 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
2126<6>[ 5.269542] c1 38 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
2127<6>[ 5.269550] c1 38 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
2128<6>[ 5.269595] c1 38 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
2129<6>[ 5.269625] c1 38 SMBCHG: get_parallel_psy: parallel charger not found
2130<6>[ 5.269699] c0 417 SMBCHG: power_ok_handler: triggered: 0x00.
2131<6>[ 5.270186] c0 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=89,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=12,0x13F3=04,0x13F4=11,0x1610=00,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
2132<14>[ 5.270526] c1 483 [CHRG_LED]: void update_led(int): is RGB LED='1'
2133<14>[ 5.270596] c1 483 [CHRG_LED]: void update_led(int): setting charging status '5'
2134<6>[ 5.270619] c1 483 [LED] led_multi_color_store , ModeRGB = 100c800
2135<6>[ 5.270629] c1 483 [LED] led_multi_color_store , ModeRGB = 100c800
2136<6>[ 5.270662] c0 374 [LED] led_multicolor_work_func , Mode = 1
2137<6>[ 5.270674] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 0 status: 1
2138<3>[ 5.270766] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0 at 5270772606 (1971-01-11 21:38:43.604534951 UTC)
2139<6>[ 5.270951] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 0 status: 0
2140<6>[ 5.271094] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 0 status: 0
2141<6>[ 5.271237] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 1 status: 0
2142<3>[ 5.290633] c0 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=5089mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=0mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 5290630576 (1971-01-11 21:38:43.620810005 UTC)
2143<7>[ 5.315896] c0 376 [BATT] batt_worker: total_time since last batt update = 70 ms.
2144<3>[ 5.342586] c0 376 [BATT] set_batt_psy_property. value(0) prop(95) at 5342586259 (1971-01-11 21:38:43.676355323 UTC)
2145<6>[ 5.342693] c0 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
2146<7>[ 5.342713] c0 376 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
2147<3>[ 5.342731] c0 376 [BATT] set charging_current(500000) at 5342724696 (1971-01-11 21:38:43.676502562 UTC)
2148<6>[ 5.342773] c0 376 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
2149<6>[ 5.342819] c0 490 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2150<6>[ 5.342838] c0 490 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2151<6>[ 5.342918] c0 490 USB_ICL: PSY_ICL_VOTER,0 voting on of val=500
2152<6>[ 5.342934] c0 490 USB_ICL: effective vote is now 500 voted by PSY_ICL_VOTER,0
2153<6>[ 5.342949] c0 490 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2154<6>[ 5.342964] c0 490 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
2155<6>[ 5.342979] c0 490 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
2156<6>[ 5.343195] c1 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(32477919876) dischg_time_ms(73) diff(1881818565) count_same_dischg(0) limit_iusb(0)
2157<6>[ 5.343219] c0 490 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
2158<6>[ 5.343262] c0 490 SMBCHG: get_parallel_psy: parallel charger not found
2159<3>[ 5.343315] c1 376 [BATT] set ibat(2100000) at 5343310946 (1971-01-11 21:38:43.677086312 UTC)
2160<3>[ 5.343341] c1 376 [BATT] set_batt_psy_property. value(1) prop(68) at 5343370530 (1971-01-11 21:38:43.677112458 UTC)
2161<6>[ 5.343404] c1 376 BATTCHG_SUSPEND: BATTCHG_USER_EN_VOTER,1 Ignoring similar vote off of val=0
2162<3>[ 5.343733] c1 376 [BATT] set_batt_psy_property. value(2100000) prop(32) at 5343731884 (1971-01-11 21:38:43.677502823 UTC)
2163<6>[ 5.343762] c1 376 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 2100
2164<6>[ 5.343781] c1 376 BATT_FCC: BATT_TYPE_FCC_VOTER,0 voting on of val=2100
2165<6>[ 5.343797] c1 376 BATT_FCC: effective vote is now 2100 voted by BATT_TYPE_FCC_VOTER,0
2166<6>[ 5.343880] c1 376 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 2100, set to 2100
2167<6>[ 5.343905] c1 376 SMBCHG: get_parallel_psy: parallel charger not found
2168<6>[ 5.344354] c1 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=89,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=02,0x13F3=04,0x13F4=11,0x1610=01,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
2169<3>[ 5.347311] c1 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5089mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=2100mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 5347313603 (1971-01-11 21:38:43.679687667 UTC)
2170<3>[ 5.596479] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60992) failed
2171<3>[ 5.596515] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60993) failed
2172<3>[ 5.596538] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60994) failed
2173<3>[ 5.596559] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60995) failed
2174<3>[ 5.596580] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60996) failed
2175<3>[ 5.596601] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60997) failed
2176<3>[ 5.596622] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60998) failed
2177<3>[ 5.596643] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60999) failed
2178<3>[ 5.596663] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 61000) failed
2179<3>[ 5.596768] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 61001) failed
2180<4>[ 5.597073] c1 482 FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
2181<7>[ 5.597112] c1 482 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
2182<6>[ 5.647281] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
2183<6>[ 5.647312] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2184<6>[ 5.647331] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
2185<6>[ 5.647347] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2186<6>[ 5.647363] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
2187<6>[ 5.647378] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2188<6>[ 5.647393] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
2189<6>[ 5.647407] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2190<6>[ 5.677067] c0 470 Set SD SDR104 state return : 0
2191<6>[ 5.689113] c3 402 SMBCHG: fastchg_handler: p2f triggered
2192<6>[ 5.689191] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
2193<6>[ 5.689213] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
2194<6>[ 6.049901] c1 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
2195<11>[ 6.053089] c1 1 init: avc: denied { set } for property=sys.usb.config pid=482 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
2196<13>[ 6.053198] c1 1 init: Service 'adbd' is being killed...
2197<6>[ 6.053499] c1 1 [USB] enable_store: enable_store: soft disconnect : 0
2198<3>[ 6.053525] c1 1 dwc3 6a00000.dwc3: request ffffffc0f2b74100 was not queued to ep0out
2199<13>[ 6.053964] c1 1 init: Service 'adbd' is being killed...
2200<6>[ 6.054100] c1 1 [USB] enable_store: enable_store: soft disconnect : 0
2201<6>[ 6.054325] c1 1 [USB] functions_store: functions_store: switch function to mtp,adb
2202<13>[ 6.054517] c1 1 init: Service 'adbd' (pid 484) killed by signal 9
2203<13>[ 6.054543] c1 1 init: Service 'adbd' (pid 484) killing any children in process group
2204<6>[ 6.054701] c1 1 [USB] enable_store: enable_store: soft disconnect : 1
2205<13>[ 6.054765] c1 1 init: Starting service 'adbd'...
2206<13>[ 6.055453] c1 1 init: write_file: Unable to open '/sys/devices/platform/android_usb/usb_function_switch': Permission denied
2207<6>[ 6.060362] c3 523 read descriptors
2208<6>[ 6.060400] c3 523 read strings
2209<6>[ 6.060443] c3 523 mtp_bind_config
2210<6>[ 6.134402] c1 482 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
2211<7>[ 6.134448] c1 482 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
2212<4>[ 6.135548] c3 528 audit_printk_skb: 522 callbacks suppressed
2213<5>[ 6.135562] c3 528 audit: type=1400 audit(32477924.080:185): avc: denied { create } for pid=482 comm="recovery" name="twadbfifo" scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
2214<5>[ 6.135598] c2 482 audit: type=1400 audit(32477924.080:186): avc: denied { create } for pid=482 comm="recovery" name="orsin" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
2215<5>[ 6.135604] c3 528 audit: type=1400 audit(32477924.080:187): avc: denied { read } for pid=482 comm="recovery" name="twadbfifo" dev="tmpfs" ino=17590 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
2216<5>[ 6.135619] c3 528 audit: type=1400 audit(32477924.080:188): avc: denied { open } for pid=482 comm="recovery" path="/tmp/twadbfifo" dev="tmpfs" ino=17590 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
2217<5>[ 6.135662] c2 482 audit: type=1400 audit(32477924.080:189): avc: denied { read } for pid=482 comm="recovery" name="orsin" dev="rootfs" ino=1959 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
2218<5>[ 6.135681] c2 482 audit: type=1400 audit(32477924.080:190): avc: denied { open } for pid=482 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=1959 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
2219<5>[ 6.136368] c2 482 audit: type=1400 audit(32477924.080:191): avc: denied { read } for pid=482 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
2220<6>[ 6.183591] c1 376 Set SD SDR104 state return : 0
2221<6>[ 6.192488] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x110, 1
2222<6>[ 6.192627] c2 482 [cap] fb_notifier_callback, event = 1
2223<6>[ 6.192631] c2 482 [TP]:fb_notifier_callback, event 1
2224<6>[ 6.199579] c0 0 [USB] suspend
2225<3>[ 6.199608] c0 0 [USB] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
2226<6>[ 6.375740] c0 0 [USB] reset
2227<6>[ 6.375798] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
2228<6>[ 6.375893] c0 490 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2229<6>[ 6.375914] c0 490 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2230<6>[ 6.375998] c0 490 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
2231<6>[ 6.376013] c0 490 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
2232<6>[ 6.376028] c0 490 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
2233<6>[ 6.376043] c0 490 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
2234<6>[ 6.376056] c0 490 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
2235<6>[ 6.376110] c0 490 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
2236<6>[ 6.376208] c1 417 SMBCHG: power_ok_handler: triggered: 0x00.
2237<6>[ 6.376241] c0 490 SMBCHG: get_parallel_psy: parallel charger not found
2238<6>[ 6.376641] c1 483 [BATT] cancel chg_full_check_work when plug out.
2239<7>[ 6.376854] c1 376 [BATT] batt_worker: total_time since last batt update = 1063 ms.
2240<6>[ 6.380567] c3 402 SMBCHG: fastchg_handler: p2f triggered
2241<6>[ 6.380615] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
2242<6>[ 6.380623] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
2243<6>[ 6.386810] c0 0 [USB] HIGHSPEED
2244<3>[ 6.399254] c1 376 [BATT] set_batt_psy_property. value(0) prop(95) at 6399250894 (1971-01-11 21:38:44.347156597 UTC)
2245<6>[ 6.399289] c1 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
2246<6>[ 6.399308] c1 376 [BATT] batt_level_adjust: Cable plug out when level 100, reset timer.
2247<6>[ 6.399395] c1 360 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2248<6>[ 6.399416] c1 360 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2249<6>[ 6.399496] c1 360 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=0
2250<6>[ 6.400524] c0 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=80,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=12,0x13F3=04,0x13F4=11,0x1610=00,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
2251<3>[ 6.403489] c0 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=5093mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=0mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 6403489436 (1971-01-11 21:38:44.349990191 UTC)
2252<6>[ 6.459441] c0 0 [USB] reset
2253<6>[ 6.466902] c0 0 [USB] HIGHSPEED
2254<6>[ 6.567871] c0 0 [USB] check_MAC_or_LINUX: Re detect as OS_LINUX
2255<6>[ 6.569469] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2256<6>[ 6.569643] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2257<6>[ 6.569789] c0 490 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2258<6>[ 6.569810] c0 490 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2259<6>[ 6.570009] c0 490 USB_ICL: PSY_ICL_VOTER,0 voting on of val=500
2260<6>[ 6.570163] c0 490 USB_ICL: effective vote is now 500 voted by PSY_ICL_VOTER,0
2261<6>[ 6.570181] c0 490 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2262<6>[ 6.570197] c0 490 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
2263<6>[ 6.570213] c0 490 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
2264<6>[ 6.570427] c1 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(73) dischg_time_ms(194) diff(121) count_same_dischg(1) limit_iusb(0)
2265<6>[ 6.570449] c0 490 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
2266<6>[ 6.570493] c0 490 SMBCHG: get_parallel_psy: parallel charger not found
2267<3>[ 6.570976] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0
2268<6>[ 6.570988] c0 490 [USB] android_work : sw_suspended 0 suspended 0 config 1,connect2pc 1
2269<6>[ 6.570989] c0 490 [USB] android_work : sw_connected 1 connected 1 last_uevent 2
2270<6>[ 6.570998] c0 490 [USB] android_work: android_work: sent missed DISCONNECT event
2271<4>[ 6.571021] c1 360 at 6571001224 (1971-01-11 21:38:44.518869687 UTC)
2272<7>[ 6.571095] c1 376 [BATT] batt_worker: total_time since last batt update = 193 ms.
2273<3>[ 6.595936] c1 376 [BATT] set_batt_psy_property. value(0) prop(95) at 6595937164 (1971-01-11 21:38:44.543838908 UTC)
2274<6>[ 6.595977] c1 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
2275<7>[ 6.595997] c1 376 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
2276<3>[ 6.596013] c1 376 [BATT] set charging_current(500000) at 6596007372 (1971-01-11 21:38:44.543919220 UTC)
2277<6>[ 6.596111] c1 360 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2278<6>[ 6.596131] c1 360 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
2279<6>[ 6.596212] c1 360 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=500
2280<6>[ 6.597111] c1 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=83,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=02,0x13F3=04,0x13F4=11,0x1610=01,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
2281<3>[ 6.600088] c0 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4768mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=2100mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 6600088258 (1971-01-11 21:38:44.546554221 UTC)
2282<6>[ 6.646807] c0 490 [USB] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2283<6>[ 6.672862] c3 402 SMBCHG: fastchg_handler: p2f triggered
2284<6>[ 6.672906] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
2285<6>[ 6.672914] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
2286<6>[ 6.853431] c0 376 mmc0 Statistics: write 664 KB in 38 ms, perf 17079 KB/s, rq 107
2287<6>[ 6.853461] c0 376 mmc0 Statistics: read 15464 KB in 295 ms, perf 52315 KB/s, rq 566
2288<5>[ 6.858647] c3 522 audit: type=1400 audit(32477924.803:192): avc: denied { read write } for pid=522 comm="recovery" name="mtp_usb" dev="tmpfs" ino=1840 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
2289<5>[ 6.858715] c3 522 audit: type=1400 audit(32477924.803:193): avc: denied { open } for pid=522 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=1840 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
2290<6>[ 6.858746] c3 522 mtp_open
2291<5>[ 6.861093] c2 530 audit: type=1400 audit(32477924.806:194): avc: denied { read } for pid=522 comm="recovery" name="/" dev="mmcblk1p1" ino=1 scontext=u:r:recovery:s0 tcontext=u:object_r:vfat:s0 tclass=dir permissive=1
2292<6>[ 7.146792] c1 374 mmc1 Statistics: write 0 KB in 4 ms, perf 0 KB/s, rq 1
2293<6>[ 7.146817] c1 374 mmc1 Statistics: read 30977 KB in 860 ms, perf 36004 KB/s, rq 1314
2294<6>[ 9.212824] c1 374 [OHIO] >>Hard Reset
2295<6>[ 9.343499] c0 361 SD : Disabling slot power
2296<6>[ 9.493495] c0 0 hw_vsync_handler: count=0
2297<6>[ 9.493539] c0 0 hw_vsync_handler: count=1
2298<6>[ 9.499259] c0 0 hw_vsync_handler: count=2
2299<6>[ 10.971362] c0 482 [VIB] en=80
2300<6>[ 10.973074] c3 448 [TP]:[NS]: IM:32, CIDIM:0, Freq:0, NS:1
2301<6>[ 10.978092] c0 490 [VIB] on x80
2302<6>[ 11.029239] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x11000110, 0
2303<6>[ 11.029325] c2 482 [cap] fb_notifier_callback, event = 1
2304<6>[ 11.029329] c2 482 [TP]:fb_notifier_callback, event 1
2305<6>[ 11.046996] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
2306<6>[ 11.047010] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2307<6>[ 11.047016] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
2308<6>[ 11.047021] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2309<6>[ 11.047027] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
2310<6>[ 11.047032] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2311<6>[ 11.047037] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
2312<6>[ 11.047042] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2313<6>[ 11.050518] c3 482 [cap] fb_notifier_callback, event = 1
2314<6>[ 11.050522] c3 482 [TP]:fb_notifier_callback, event 1
2315<6>[ 11.051444] c0 490 [VIB] off
2316<6>[ 11.092134] c3 482 [cap] fb_notifier_callback, event = 1
2317<6>[ 11.092139] c3 482 [TP]:fb_notifier_callback, event 1
2318<6>[ 11.646984] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:44
2319<6>[ 11.646997] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2320<6>[ 11.647004] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:44
2321<6>[ 11.647010] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2322<6>[ 11.647017] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:44
2323<6>[ 11.647023] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2324<6>[ 11.647029] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:44
2325<6>[ 11.647035] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2326<6>[ 13.762909] c2 482 [cap] fb_notifier_callback, event = 1
2327<6>[ 13.762913] c2 482 [TP]:fb_notifier_callback, event 1
2328<6>[ 13.885948] c1 482 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
2329<7>[ 13.886010] c1 482 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
2330<6>[ 13.886306] c1 482 [VIB] en=80
2331<6>[ 13.886477] c1 360 [VIB] on x82
2332<6>[ 13.937120] c0 482 [cap] fb_notifier_callback, event = 1
2333<6>[ 13.937144] c1 482 [TP]:fb_notifier_callback, event 1
2334<6>[ 13.966376] c1 360 [VIB] off
2335<6>[ 14.372594] c0 376 [OHIO] >>Hard Reset
2336<6>[ 14.506821] c0 490 hw_vsync_handler: count=0
2337<6>[ 14.506891] c0 490 hw_vsync_handler: count=1
2338<6>[ 14.524218] c0 0 hw_vsync_handler: count=2
2339<6>[ 15.081804] c2 482 [VIB] en=80
2340<6>[ 15.081966] c2 396 [VIB] on x82
2341<6>[ 15.135093] c2 482 [cap] fb_notifier_callback, event = 1
2342<6>[ 15.135097] c2 482 [TP]:fb_notifier_callback, event 1
2343<6>[ 15.161879] c2 396 [VIB] off
2344<6>[ 15.218118] c3 482 [cap] fb_notifier_callback, event = 1
2345<6>[ 15.218122] c3 482 [TP]:fb_notifier_callback, event 1
2346<3>[ 16.586805] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0 at 16586812117 (1971-01-11 21:38:54.534703080 UTC)
2347<6>[ 16.699609] c3 482 [VIB] en=80
2348<6>[ 16.699755] c3 520 [VIB] on x82
2349<6>[ 16.746997] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:67
2350<6>[ 16.747012] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2351<6>[ 16.747018] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:67
2352<6>[ 16.747023] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2353<6>[ 16.747029] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:67
2354<6>[ 16.747034] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2355<6>[ 16.747039] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:67
2356<6>[ 16.747044] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2357<6>[ 16.768801] c3 482 [cap] fb_notifier_callback, event = 1
2358<6>[ 16.768805] c3 482 [TP]:fb_notifier_callback, event 1
2359<6>[ 16.779718] c3 520 [VIB] off
2360<6>[ 16.800165] c2 482 [cap] fb_notifier_callback, event = 1
2361<6>[ 16.800170] c2 482 [TP]:fb_notifier_callback, event 1
2362<6>[ 16.846980] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:45
2363<6>[ 16.846990] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2364<6>[ 16.846998] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:45
2365<6>[ 16.847004] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2366<6>[ 16.847011] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:45
2367<6>[ 16.847017] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2368<6>[ 16.847023] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:45
2369<6>[ 16.847029] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2370<6>[ 17.923959] c2 482 [VIB] en=80
2371<6>[ 17.924113] c2 396 [VIB] on x82
2372<6>[ 17.993688] c3 482 [cap] fb_notifier_callback, event = 1
2373<6>[ 17.993692] c3 482 [TP]:fb_notifier_callback, event 1
2374<6>[ 18.004039] c2 396 [VIB] off
2375<6>[ 19.362604] c3 482 [VIB] en=80
2376<6>[ 19.362828] c3 520 [VIB] on x82
2377<6>[ 19.412290] c3 482 [cap] fb_notifier_callback, event = 1
2378<6>[ 19.412295] c3 482 [TP]:fb_notifier_callback, event 1
2379<6>[ 19.442672] c3 520 [VIB] off
2380<6>[ 19.480393] c3 482 [cap] fb_notifier_callback, event = 1
2381<6>[ 19.480397] c3 482 [TP]:fb_notifier_callback, event 1
2382<6>[ 19.533457] c0 490 hw_vsync_handler: count=0
2383<6>[ 19.533526] c0 490 hw_vsync_handler: count=1
2384<6>[ 19.549086] c0 0 hw_vsync_handler: count=2
2385<6>[ 19.948989] c2 482 [VIB] en=80
2386<6>[ 19.949092] c2 396 [VIB] on x82
2387<6>[ 20.016566] c2 482 [cap] fb_notifier_callback, event = 1
2388<6>[ 20.016570] c2 482 [TP]:fb_notifier_callback, event 1
2389<6>[ 20.029097] c2 396 [VIB] off
2390<6>[ 20.038910] c3 482 [cap] fb_notifier_callback, event = 1
2391<6>[ 20.038915] c3 482 [TP]:fb_notifier_callback, event 1
2392<6>[ 20.046954] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
2393<6>[ 20.046962] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2394<6>[ 20.046968] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
2395<6>[ 20.046974] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2396<6>[ 20.046980] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
2397<6>[ 20.046985] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2398<6>[ 20.046990] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
2399<6>[ 20.046995] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2400<6>[ 20.080172] c3 482 [cap] fb_notifier_callback, event = 1
2401<6>[ 20.080177] c3 482 [TP]:fb_notifier_callback, event 1
2402<6>[ 20.646972] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:45
2403<6>[ 20.646984] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2404<6>[ 20.646992] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:45
2405<6>[ 20.646998] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2406<6>[ 20.647005] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:45
2407<6>[ 20.647011] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2408<6>[ 20.647017] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:45
2409<6>[ 20.647023] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2410<6>[ 22.628435] c3 482 [cap] fb_notifier_callback, event = 1
2411<6>[ 22.628439] c3 482 [TP]:fb_notifier_callback, event 1
2412<6>[ 22.747003] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:69
2413<6>[ 22.747016] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2414<6>[ 22.747023] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:69
2415<6>[ 22.747028] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2416<6>[ 22.747034] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:69
2417<6>[ 22.747039] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2418<6>[ 22.747044] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:69
2419<6>[ 22.747049] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2420<6>[ 22.754884] c3 482 [cap] fb_notifier_callback, event = 1
2421<6>[ 22.754888] c3 482 [TP]:fb_notifier_callback, event 1
2422<6>[ 22.755102] c3 482 [VIB] en=80
2423<6>[ 22.755215] c3 520 [VIB] on x82
2424<4>[ 22.762283] c3 482 audit_printk_skb: 3 callbacks suppressed
2425<5>[ 22.762292] c3 482 audit: type=1400 audit(32477940.706:196): avc: denied { getattr } for pid=482 comm="recovery" path="/data/.layout_version" dev="mmcblk0p64" ino=12 scontext=u:r:recovery:s0 tcontext=u:object_r:install_data_file:s0 tclass=file permissive=1
2426<6>[ 22.793680] c3 482 [cap] fb_notifier_callback, event = 1
2427<6>[ 22.793684] c3 482 [TP]:fb_notifier_callback, event 1
2428<6>[ 22.835151] c3 520 [VIB] off
2429<6>[ 23.346964] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:44
2430<6>[ 23.346974] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2431<6>[ 23.346982] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:44
2432<6>[ 23.346988] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2433<6>[ 23.346994] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:44
2434<6>[ 23.347001] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2435<6>[ 23.347007] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:44
2436<6>[ 23.347012] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2437<6>[ 24.560165] c0 0 hw_vsync_handler: count=0
2438<6>[ 24.560210] c0 0 hw_vsync_handler: count=1
2439<6>[ 24.574442] c0 0 hw_vsync_handler: count=2
2440<3>[ 26.613443] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0 at 26613451345 (1971-01-11 21:39:04.561342256 UTC)
2441<6>[ 26.898538] c3 482 [cap] fb_notifier_callback, event = 1
2442<6>[ 26.898543] c3 482 [TP]:fb_notifier_callback, event 1
2443<6>[ 26.947033] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
2444<6>[ 26.947047] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2445<6>[ 26.947053] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
2446<6>[ 26.947059] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2447<6>[ 26.947064] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
2448<6>[ 26.947069] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2449<6>[ 26.947075] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
2450<6>[ 26.947079] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2451<6>[ 26.967684] c2 482 [cap] fb_notifier_callback, event = 1
2452<6>[ 26.967688] c2 482 [TP]:fb_notifier_callback, event 1
2453<6>[ 27.001868] c2 482 [cap] fb_notifier_callback, event = 1
2454<6>[ 27.001872] c2 482 [TP]:fb_notifier_callback, event 1
2455<6>[ 27.035863] c2 482 [cap] fb_notifier_callback, event = 1
2456<6>[ 27.035868] c2 482 [TP]:fb_notifier_callback, event 1
2457<6>[ 27.047038] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:46
2458<6>[ 27.047054] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2459<6>[ 27.047061] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:46
2460<6>[ 27.047067] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2461<6>[ 27.047074] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:46
2462<6>[ 27.047080] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2463<6>[ 27.047086] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:46
2464<6>[ 27.047092] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2465<6>[ 27.067306] c3 482 [cap] fb_notifier_callback, event = 1
2466<6>[ 27.067310] c3 482 [TP]:fb_notifier_callback, event 1
2467<6>[ 27.099514] c3 482 [cap] fb_notifier_callback, event = 1
2468<6>[ 27.099518] c3 482 [TP]:fb_notifier_callback, event 1
2469<6>[ 27.131781] c3 482 [cap] fb_notifier_callback, event = 1
2470<6>[ 27.131785] c3 482 [TP]:fb_notifier_callback, event 1
2471<6>[ 27.146903] c3 520 msm_thermal:do_core_control Set Offline: CPU3 Temp: 71
2472<4>[ 27.147799] c3 19 IRQ132 no longer affine to CPU3
2473<4>[ 27.147806] c3 19 IRQ133 no longer affine to CPU3
2474<4>[ 27.147812] c3 19 IRQ134 no longer affine to CPU3
2475<4>[ 27.147818] c3 19 IRQ135 no longer affine to CPU3
2476<4>[ 27.147823] c3 19 IRQ136 no longer affine to CPU3
2477<4>[ 27.147829] c3 19 IRQ137 no longer affine to CPU3
2478<4>[ 27.147834] c3 19 IRQ138 no longer affine to CPU3
2479<4>[ 27.147839] c3 19 IRQ139 no longer affine to CPU3
2480<4>[ 27.147845] c3 19 IRQ140 no longer affine to CPU3
2481<4>[ 27.147850] c3 19 IRQ141 no longer affine to CPU3
2482<6>[ 27.150871] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:71
2483<6>[ 27.150898] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2484<6>[ 27.150916] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:71
2485<6>[ 27.150931] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2486<6>[ 27.150947] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:71
2487<6>[ 27.150962] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2488<6>[ 27.151004] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:71
2489<6>[ 27.151020] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2490<6>[ 27.169769] c0 482 [cap] fb_notifier_callback, event = 1
2491<6>[ 27.169777] c0 482 [TP]:fb_notifier_callback, event 1
2492<6>[ 27.202214] c2 482 [cap] fb_notifier_callback, event = 1
2493<6>[ 27.202217] c2 482 [TP]:fb_notifier_callback, event 1
2494<6>[ 27.235869] c0 482 [cap] fb_notifier_callback, event = 1
2495<6>[ 27.235876] c0 482 [TP]:fb_notifier_callback, event 1
2496<6>[ 27.250272] c0 490 msm_thermal:do_core_control Allow Online CPU3 Temp: 47
2497<6>[ 27.250653] c3 0 Detected PIPT I-cache on CPU3
2498<6>[ 27.250687] c3 0 CPU3: found redistributor 101 region 0:0x0000000009cc0000
2499<6>[ 27.250785] c3 0 CPU3: Booted secondary processor [511f2052]
2500<6>[ 27.259626] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
2501<6>[ 27.259653] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2502<6>[ 27.259671] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
2503<6>[ 27.259685] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2504<6>[ 27.259700] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
2505<6>[ 27.259714] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2506<6>[ 27.259758] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
2507<6>[ 27.259772] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2508<6>[ 27.268441] c2 482 [cap] fb_notifier_callback, event = 1
2509<6>[ 27.268446] c2 482 [TP]:fb_notifier_callback, event 1
2510<6>[ 27.299257] c2 482 [cap] fb_notifier_callback, event = 1
2511<6>[ 27.299262] c2 482 [TP]:fb_notifier_callback, event 1
2512<6>[ 27.331221] c2 482 [cap] fb_notifier_callback, event = 1
2513<6>[ 27.331226] c2 482 [TP]:fb_notifier_callback, event 1
2514<6>[ 27.364604] c2 482 [cap] fb_notifier_callback, event = 1
2515<6>[ 27.364608] c2 482 [TP]:fb_notifier_callback, event 1
2516<6>[ 27.398092] c2 482 [cap] fb_notifier_callback, event = 1
2517<6>[ 27.398096] c2 482 [TP]:fb_notifier_callback, event 1
2518<6>[ 27.431550] c2 482 [cap] fb_notifier_callback, event = 1
2519<6>[ 27.431554] c2 482 [TP]:fb_notifier_callback, event 1
2520<6>[ 27.464118] c2 482 [cap] fb_notifier_callback, event = 1
2521<6>[ 27.464122] c2 482 [TP]:fb_notifier_callback, event 1
2522<6>[ 27.497566] c2 482 [cap] fb_notifier_callback, event = 1
2523<6>[ 27.497571] c2 482 [TP]:fb_notifier_callback, event 1
2524<6>[ 27.531141] c2 482 [cap] fb_notifier_callback, event = 1
2525<6>[ 27.531146] c2 482 [TP]:fb_notifier_callback, event 1
2526<6>[ 27.564784] c2 482 [cap] fb_notifier_callback, event = 1
2527<6>[ 27.564788] c2 482 [TP]:fb_notifier_callback, event 1
2528<6>[ 27.597923] c2 482 [cap] fb_notifier_callback, event = 1
2529<6>[ 27.597928] c2 482 [TP]:fb_notifier_callback, event 1
2530<6>[ 27.631480] c2 482 [cap] fb_notifier_callback, event = 1
2531<6>[ 27.631485] c2 482 [TP]:fb_notifier_callback, event 1
2532<6>[ 27.664864] c2 482 [cap] fb_notifier_callback, event = 1
2533<6>[ 27.664868] c2 482 [TP]:fb_notifier_callback, event 1
2534<6>[ 27.698400] c2 482 [cap] fb_notifier_callback, event = 1
2535<6>[ 27.698405] c2 482 [TP]:fb_notifier_callback, event 1
2536<6>[ 27.731455] c2 482 [cap] fb_notifier_callback, event = 1
2537<6>[ 27.731460] c2 482 [TP]:fb_notifier_callback, event 1
2538<6>[ 27.764928] c2 482 [cap] fb_notifier_callback, event = 1
2539<6>[ 27.764933] c2 482 [TP]:fb_notifier_callback, event 1
2540<6>[ 27.798369] c2 482 [cap] fb_notifier_callback, event = 1
2541<6>[ 27.798374] c2 482 [TP]:fb_notifier_callback, event 1
2542<6>[ 27.831827] c2 482 [cap] fb_notifier_callback, event = 1
2543<6>[ 27.831832] c2 482 [TP]:fb_notifier_callback, event 1
2544<6>[ 27.864811] c2 482 [cap] fb_notifier_callback, event = 1
2545<6>[ 27.864815] c2 482 [TP]:fb_notifier_callback, event 1
2546<6>[ 27.898343] c2 482 [cap] fb_notifier_callback, event = 1
2547<6>[ 27.898348] c2 482 [TP]:fb_notifier_callback, event 1
2548<6>[ 28.166257] c2 482 [VIB] en=80
2549<6>[ 28.166358] c2 396 [VIB] on x82
2550<6>[ 28.168185] c0 448 [TP]:[NS]: IM:2, CIDIM:1, Freq:2, NS:1
2551<6>[ 28.191990] c3 482 [cap] fb_notifier_callback, event = 1
2552<6>[ 28.191995] c3 482 [TP]:fb_notifier_callback, event 1
2553<6>[ 28.246311] c2 396 [VIB] off
2554<6>[ 28.257214] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
2555<6>[ 28.257238] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2556<6>[ 28.257255] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
2557<6>[ 28.257270] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2558<6>[ 28.257285] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
2559<6>[ 28.257299] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2560<6>[ 28.257314] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
2561<6>[ 28.257327] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2562<6>[ 28.314704] c2 482 [cap] fb_notifier_callback, event = 1
2563<6>[ 28.314708] c2 482 [TP]:fb_notifier_callback, event 1
2564<6>[ 28.857605] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:45
2565<6>[ 28.857633] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2566<6>[ 28.857651] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:45
2567<6>[ 28.857667] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2568<6>[ 28.857683] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:45
2569<6>[ 28.857699] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2570<6>[ 28.857715] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:45
2571<6>[ 28.857730] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2572<6>[ 29.586830] c0 490 hw_vsync_handler: count=0
2573<6>[ 29.586928] c0 490 hw_vsync_handler: count=1
2574<6>[ 29.600169] c0 0 hw_vsync_handler: count=2
2575<6>[ 30.756549] c0 482 [VIB] en=80
2576<6>[ 30.757110] c0 490 [VIB] on x82
2577<6>[ 30.822507] c2 482 [cap] fb_notifier_callback, event = 1
2578<6>[ 30.822511] c2 482 [TP]:fb_notifier_callback, event 1
2579<6>[ 30.836654] c0 490 [VIB] off
2580<6>[ 30.860263] c2 482 [cap] fb_notifier_callback, event = 1
2581<6>[ 30.860267] c2 482 [TP]:fb_notifier_callback, event 1
2582<6>[ 34.613509] c0 490 hw_vsync_handler: count=0
2583<6>[ 34.613610] c0 490 hw_vsync_handler: count=1
2584<6>[ 34.624004] c0 0 hw_vsync_handler: count=2
2585<6>[ 36.133705] c2 482 [VIB] en=80
2586<6>[ 36.133858] c2 396 [VIB] on x82
2587<6>[ 36.199433] c2 482 [cap] fb_notifier_callback, event = 1
2588<6>[ 36.199437] c2 482 [TP]:fb_notifier_callback, event 1
2589<6>[ 36.213777] c2 396 [VIB] off
2590<3>[ 36.640110] c1 360 [BATT] chg_full_check_worker: vol:4378, curr=-106, is_full_count=1, is_full=0 at 36640116042 (1971-01-11 21:39:14.588010911 UTC)
2591<6>[ 39.626831] c0 490 hw_vsync_handler: count=0
2592<6>[ 39.626929] c0 490 hw_vsync_handler: count=1
2593<6>[ 39.631237] c0 0 hw_vsync_handler: count=2
2594<6>[ 40.223132] c0 482 [VIB] en=80
2595<6>[ 40.233516] c0 490 [VIB] on x82
2596<6>[ 40.298307] c2 482 [cap] fb_notifier_callback, event = 1
2597<6>[ 40.298311] c2 482 [TP]:fb_notifier_callback, event 1
2598<6>[ 40.303210] c0 490 [VIB] off
2599<6>[ 40.381058] c2 482 [cap] fb_notifier_callback, event = 1
2600<6>[ 40.381063] c2 482 [TP]:fb_notifier_callback, event 1
2601<6>[ 44.640187] c0 490 hw_vsync_handler: count=0
2602<6>[ 44.640282] c0 490 hw_vsync_handler: count=1
2603<6>[ 44.654995] c0 0 hw_vsync_handler: count=2
2604<3>[ 46.666752] c1 360 [BATT] chg_full_check_worker: vol:4378, curr=-106, is_full_count=2, is_full=0 at 46666761260 (1971-01-11 21:39:24.614652639 UTC)
2605<6>[ 49.667096] c0 490 hw_vsync_handler: count=0
2606<6>[ 49.667192] c0 490 hw_vsync_handler: count=1
2607<6>[ 49.678287] c0 0 hw_vsync_handler: count=2
2608<6>[ 50.195982] c2 482 [VIB] en=80
2609<6>[ 50.196131] c2 396 [VIB] on x82
2610<6>[ 50.276055] c2 396 [VIB] off
2611<6>[ 51.268043] c2 482 [VIB] en=80
2612<6>[ 51.268132] c2 396 [VIB] on x82
2613<6>[ 51.307543] c2 482 [cap] fb_notifier_callback, event = 1
2614<6>[ 51.307547] c2 482 [TP]:fb_notifier_callback, event 1
2615<6>[ 51.348090] c2 396 [VIB] off
2616<6>[ 52.297888] c2 482 [cap] fb_notifier_callback, event = 1
2617<6>[ 52.297891] c2 482 [TP]:fb_notifier_callback, event 1
2618<6>[ 52.350172] c3 482 [cap] fb_notifier_callback, event = 1
2619<6>[ 52.350176] c3 482 [TP]:fb_notifier_callback, event 1
2620<6>[ 52.381152] c3 482 [cap] fb_notifier_callback, event = 1
2621<6>[ 52.381156] c3 482 [TP]:fb_notifier_callback, event 1
2622<6>[ 52.414552] c3 482 [cap] fb_notifier_callback, event = 1
2623<6>[ 52.414556] c3 482 [TP]:fb_notifier_callback, event 1
2624<6>[ 52.447755] c3 482 [cap] fb_notifier_callback, event = 1
2625<6>[ 52.447760] c3 482 [TP]:fb_notifier_callback, event 1
2626<6>[ 52.457221] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
2627<6>[ 52.457244] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2628<6>[ 52.457261] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
2629<6>[ 52.457276] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2630<6>[ 52.457292] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
2631<6>[ 52.457305] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2632<6>[ 52.457320] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
2633<6>[ 52.457333] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2634<6>[ 52.483697] c2 482 [cap] fb_notifier_callback, event = 1
2635<6>[ 52.483701] c2 482 [TP]:fb_notifier_callback, event 1
2636<6>[ 52.517405] c2 482 [cap] fb_notifier_callback, event = 1
2637<6>[ 52.517410] c2 482 [TP]:fb_notifier_callback, event 1
2638<6>[ 52.551239] c2 482 [cap] fb_notifier_callback, event = 1
2639<6>[ 52.551243] c2 482 [TP]:fb_notifier_callback, event 1
2640<6>[ 52.557232] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
2641<6>[ 52.557253] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2642<6>[ 52.557270] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
2643<6>[ 52.557285] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2644<6>[ 52.557300] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
2645<6>[ 52.557315] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2646<6>[ 52.557329] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
2647<6>[ 52.557343] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2648<6>[ 52.582703] c2 482 [cap] fb_notifier_callback, event = 1
2649<6>[ 52.582708] c2 482 [TP]:fb_notifier_callback, event 1
2650<6>[ 52.616660] c3 482 [cap] fb_notifier_callback, event = 1
2651<6>[ 52.616664] c3 482 [TP]:fb_notifier_callback, event 1
2652<6>[ 52.649107] c3 482 [cap] fb_notifier_callback, event = 1
2653<6>[ 52.649111] c3 482 [TP]:fb_notifier_callback, event 1
2654<6>[ 52.657321] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
2655<6>[ 52.657369] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
2656<6>[ 52.657387] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
2657<6>[ 52.657402] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
2658<6>[ 52.657417] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
2659<6>[ 52.657431] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
2660<6>[ 52.657446] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
2661<6>[ 52.657459] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
2662<6>[ 52.686059] c3 482 [cap] fb_notifier_callback, event = 1
2663<6>[ 52.686064] c3 482 [TP]:fb_notifier_callback, event 1
2664<6>[ 52.718610] c3 482 [cap] fb_notifier_callback, event = 1
2665<6>[ 52.718615] c3 482 [TP]:fb_notifier_callback, event 1
2666<6>[ 52.753143] c3 482 [cap] fb_notifier_callback, event = 1
2667<6>[ 52.753148] c3 482 [TP]:fb_notifier_callback, event 1
2668<6>[ 52.786348] c3 482 [cap] fb_notifier_callback, event = 1
2669<6>[ 52.786353] c3 482 [TP]:fb_notifier_callback, event 1
2670<6>[ 52.819910] c3 482 [cap] fb_notifier_callback, event = 1
2671<6>[ 52.819915] c3 482 [TP]:fb_notifier_callback, event 1
2672<6>[ 52.853039] c3 482 [cap] fb_notifier_callback, event = 1
2673<6>[ 52.853043] c3 482 [TP]:fb_notifier_callback, event 1
2674<6>[ 52.886455] c3 482 [cap] fb_notifier_callback, event = 1
2675<6>[ 52.886459] c3 482 [TP]:fb_notifier_callback, event 1
2676<6>[ 52.919759] c3 482 [cap] fb_notifier_callback, event = 1
2677<6>[ 52.919763] c3 482 [TP]:fb_notifier_callback, event 1
2678<6>[ 52.953105] c3 482 [cap] fb_notifier_callback, event = 1
2679<6>[ 52.953110] c3 482 [TP]:fb_notifier_callback, event 1
2680<6>[ 52.953969] c3 482 [VIB] en=80
2681<6>[ 52.954080] c3 520 [VIB] on x82
2682<5>[ 52.954926] c3 482 audit: type=1400 audit(32477970.900:197): avc: denied { create } for pid=482 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2683<5>[ 52.955062] c3 482 audit: type=1400 audit(32477970.900:198): avc: denied { write open } for pid=482 comm="recovery" path="/data/media/recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2684<5>[ 52.955134] c3 482 audit: type=1400 audit(32477970.900:199): avc: denied { getattr } for pid=482 comm="recovery" path="/data/media/recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2685<5>[ 52.955774] c3 482 audit: type=1400 audit(32477970.900:200): avc: denied { setattr } for pid=482 comm="recovery" name="recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2686<5>[ 52.955819] c3 482 audit: type=1400 audit(32477970.900:201): avc: denied { relabelfrom } for pid=482 comm="recovery" name="recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
2687<5>[ 52.955844] c3 482 audit: type=1400 audit(32477970.900:202): avc: denied { relabelto } for pid=482 comm="recovery" name="recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1