GTCqEZsM

1<6>[    0.000000 / 01-01 00:00:00.000][0] Booting Linux on physical CPU 0x0
2<5>[    0.000000 / 01-01 00:00:00.000][0] Linux version 4.9.112-perf (lgmobile@LGEACI5R13) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jan 7 10:46:47 KST 2019
3<6>[    0.000000 / 01-01 00:00:00.000][0] Boot CPU: AArch64 Processor [517f803c]
4<6>[    0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. SDM845 V2.1 - LG Electronics, judyln_lao rev_1.0
5<6>[    0.000000 / 01-01 00:00:00.000][0] debug: ignoring loglevel setting.
6<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f4400000, size 184 MiB
7<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
8<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 16 MiB
9<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
10<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f2400000, size 16 MiB
11<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
12<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f0400000, size 32 MiB
13<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
14<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x000000017bc00000, size 36 MiB
15<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
16<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000efc00000, size 8 MiB
17<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node secure_sp_region, compatible id shared-dma-pool
18<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008bf00000, size 5 MiB
19<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node camera_region@0x8bf00000, compatible id removed-dma-pool
20<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008c400000, size 0 MiB
21<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node ips_fw_region@0x8c400000, compatible id removed-dma-pool
22<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008c410000, size 0 MiB
23<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node ipa_gsi_region@0x8c410000, compatible id removed-dma-pool
24<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008c415000, size 0 MiB
25<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node gpu_region@0x8c415000, compatible id removed-dma-pool
26<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008c500000, size 30 MiB
27<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node adsp_region@0x8c500000, compatible id removed-dma-pool
28<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008e300000, size 1 MiB
29<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node wlan_fw_region@0x8df00000, compatible id removed-dma-pool
30<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008e400000, size 137 MiB
31<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node modem_region@0x8e000000, compatible id removed-dma-pool
32<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000096d00000, size 5 MiB
33<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node video_region@0x95800000, compatible id removed-dma-pool
34<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000097200000, size 8 MiB
35<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node cdsp_region@0x95d00000, compatible id removed-dma-pool
36<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000097a00000, size 2 MiB
37<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node mba_region@0x96500000, compatible id removed-dma-pool
38<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000097c00000, size 20 MiB
39<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node slpi_region@0x96700000, compatible id removed-dma-pool
40<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000099000000, size 1 MiB
41<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node pil_spss_region@0x97b00000, compatible id removed-dma-pool
42<6>[    0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000b0000000, size 1 MiB
43<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node ramoops_region@b0000000, compatible id removed-dma-pool
44<6>[    0.000000 / 01-01 00:00:00.000][0] Reserved memory: created DMA memory pool at 0x00000000b2000000, size 24 MiB
45<6>[    0.000000 / 01-01 00:00:00.000][0] OF: reserved mem: initialized node qseecom_region@0x8ab00000, compatible id shared-dma-pool
46<7>[    0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 966729
47<7>[    0.000000 / 01-01 00:00:00.000][0]   DMA zone: 7039 pages used for memmap
48<7>[    0.000000 / 01-01 00:00:00.000][0]   DMA zone: 0 pages reserved
49<7>[    0.000000 / 01-01 00:00:00.000][0]   DMA zone: 450473 pages, LIFO batch:31
50<7>[    0.000000 / 01-01 00:00:00.000][0]   Normal zone: 8067 pages used for memmap
51<7>[    0.000000 / 01-01 00:00:00.000][0]   Normal zone: 516256 pages, LIFO batch:31
52<6>[    0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
53<6>[    0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.1 detected in firmware.
54<6>[    0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
55<6>[    0.000000 / 01-01 00:00:00.000][0] psci: MIGRATE_INFO_TYPE not supported.
56<6>[    0.000000 / 01-01 00:00:00.000][0] psci: SMC Calling Convention v1.0
57<5>[    0.000000 / 01-01 00:00:00.000][0] random: fast init done
58<6>[    0.000000 / 01-01 00:00:00.000][0] percpu: Embedded 23 pages/cpu @ffffffd37b840000 s54680 r8192 d31336 u94208
59<7>[    0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s54680 r8192 d31336 u94208 alloc=23*4096
60<7>[    0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
61<6>[    0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 951623
62<4>[    0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
63<6>[    0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x6d630100
64<6>[    0.000000 / 01-01 00:00:00.000][0] [LGE-HW-REV] rev_10
65<6>[    0.000000 / 01-01 00:00:00.000][0] [LGE-HW-REV] subrev_2
66<3>[    0.000000 / 01-01 00:00:00.000][0] BOOTMOD: unified_bootmode_setup: input=(NO_INIT, )->A_N
67<6>[    0.000000 / 01-01 00:00:00.000][0] Boot cable : NO_INIT 12
68<3>[    0.000000 / 01-01 00:00:00.000][0] BOOTMOD: setup_bootmode_plmn: PLMN: input GLOBAL -> (operator OPEN, region COM)
69<6>[    0.000000 / 01-01 00:00:00.000][0] LGE One Binary Sku carrier : 15 GLOBAL
70<6>[    0.000000 / 01-01 00:00:00.000][0] androidboot.vendor.lge.hydra: 1
71<6>[    0.000000 / 01-01 00:00:00.000][0] LGE One Binary NTCode Operator : 17 GLOBAL
72<6>[    0.000000 / 01-01 00:00:00.000][0] log_buf_len individual max cpu contribution: 524288 bytes
73<6>[    0.000000 / 01-01 00:00:00.000][0] log_buf_len total cpu_extra contributions: 3670016 bytes
74<6>[    0.000000 / 01-01 00:00:00.000][0] log_buf_len min size: 524288 bytes
75<6>[    0.000000 / 01-01 00:00:00.000][0] log_buf_len: 4194304 bytes
76<6>[    0.000000 / 01-01 00:00:00.000][0] early log buf free: 512716(97%)
77<6>[    0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
78<6>[    0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
79<6>[    0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
80<6>[    0.000000 / 01-01 00:00:00.000][0] software IO TLB [mem 0xef800000-0xefc00000] (4MB) mapped at [ffffffd2ef800000-ffffffd2efbfffff]
81<6>[    0.000000 / 01-01 00:00:00.000][0] Memory: 3361452K/3866916K available (19966K kernel code, 2456K rwdata, 9644K rodata, 6144K init, 7128K bss, 206456K reserved, 299008K cma-reserved)
82<5>[    0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
83<5>[    0.000000 / 01-01 00:00:00.000][0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
84<5>[    0.000000 / 01-01 00:00:00.000][0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
85<5>[    0.000000 / 01-01 00:00:00.000][0]       .text : 0xffffff94a3480000 - 0xffffff94a4800000   ( 19968 KB)
86<5>[    0.000000 / 01-01 00:00:00.000][0]     .rodata : 0xffffff94a4800000 - 0xffffff94a5200000   ( 10240 KB)
87<5>[    0.000000 / 01-01 00:00:00.000][0]       .init : 0xffffff94a5200000 - 0xffffff94a5800000   (  6144 KB)
88<5>[    0.000000 / 01-01 00:00:00.000][0]       .data : 0xffffff94a5800000 - 0xffffff94a5a66008   (  2457 KB)
89<5>[    0.000000 / 01-01 00:00:00.000][0]        .bss : 0xffffff94a5a66008 - 0xffffff94a615c154   (  7129 KB)
90<5>[    0.000000 / 01-01 00:00:00.000][0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
91<5>[    0.000000 / 01-01 00:00:00.000][0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
92<5>[    0.000000 / 01-01 00:00:00.000][0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
93<5>[    0.000000 / 01-01 00:00:00.000][0]               0xffffffbf4a000000 - 0xffffffbf4df82800   (    63 MB actual)
94<5>[    0.000000 / 01-01 00:00:00.000][0]     memory  : 0xffffffd280000000 - 0xffffffd37e0a0000   (  4064 MB)
95<6>[    0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
96<6>[    0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
97<6>[    0.000000 / 01-01 00:00:00.000][0] 	RCU dyntick-idle grace-period acceleration is enabled.
98<4>[    0.000000 / 01-01 00:00:00.000][0] 
99<4>[    0.000000 / 01-01 00:00:00.000][0] **********************************************************
100<4>[    0.000000 / 01-01 00:00:00.000][0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
101<4>[    0.000000 / 01-01 00:00:00.000][0] **                                                      **
102<4>[    0.000000 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory.  **
103<4>[    0.000000 / 01-01 00:00:00.000][0] **                                                      **
104<4>[    0.000000 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is     **
105<4>[    0.000000 / 01-01 00:00:00.000][0] ** unsafe for production use.                           **
106<4>[    0.000000 / 01-01 00:00:00.000][0] **                                                      **
107<4>[    0.000000 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging    **
108<4>[    0.000000 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor!  **
109<4>[    0.000000 / 01-01 00:00:00.000][0] **                                                      **
110<4>[    0.000000 / 01-01 00:00:00.000][0] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
111<4>[    0.000000 / 01-01 00:00:00.000][0] **********************************************************
112<6>[    0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
113<6>[    0.000000 / 01-01 00:00:00.000][0] PDC SDM845 v2 initialized
114<6>[    0.000000 / 01-01 00:00:00.000][0] 	Offload RCU callbacks from all CPUs
115<6>[    0.000000 / 01-01 00:00:00.000][0] 	Offload RCU callbacks from CPUs: 0-7.
116<6>[    0.000000 / 01-01 00:00:00.000][0] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
117<6>[    0.000000 / 01-01 00:00:00.000][0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
118<6>[    0.000004 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
119<6>[    0.000028 / 01-01 00:00:00.000][0] clocksource: Switched to clocksource arch_sys_counter
120<6>[    0.002545 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
121<6>[    0.002570 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
122<6>[    0.002650 / 01-01 00:00:00.000][0] Security Framework initialized
123<6>[    0.002668 / 01-01 00:00:00.000][0] SELinux:  Initializing.
124<7>[    0.002727 / 01-01 00:00:00.000][0] SELinux:  Starting in permissive mode
125<6>[    0.002763 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
126<6>[    0.002775 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
127<3>[    0.003767 / 01-01 00:00:00.000][0] /cpus/cpu@0: Missing clock-frequency property
128<3>[    0.003785 / 01-01 00:00:00.000][0] /cpus/cpu@100: Missing clock-frequency property
129<3>[    0.003797 / 01-01 00:00:00.000][0] /cpus/cpu@200: Missing clock-frequency property
130<3>[    0.003808 / 01-01 00:00:00.000][0] /cpus/cpu@300: Missing clock-frequency property
131<3>[    0.003819 / 01-01 00:00:00.000][0] /cpus/cpu@400: Missing clock-frequency property
132<3>[    0.003832 / 01-01 00:00:00.000][0] /cpus/cpu@500: Missing clock-frequency property
133<3>[    0.003842 / 01-01 00:00:00.000][0] /cpus/cpu@600: Missing clock-frequency property
134<3>[    0.003853 / 01-01 00:00:00.000][0] /cpus/cpu@700: Missing clock-frequency property
135<6>[    0.003924 / 01-01 00:00:00.000][0] sched-energy: Sched-energy-costs installed from DT
136<6>[    0.003942 / 01-01 00:00:00.000][0] ASID allocator initialised with 32768 entries
137<6>[    0.021720 / 01-01 00:00:00.019][0] MSM Memory Dump base table set up
138<6>[    0.021752 / 01-01 00:00:00.019][0] MSM Memory Dump apps data table set up
139<6>[    0.023199 / 01-01 00:00:00.019][0] panic-handler: reserved[@0xb0100000+@0x1800000)
140<6>[    0.032909 / 01-01 00:00:00.029][1] CPU1: Booted secondary processor [517f803c]
141<6>[    0.042214 / 01-01 00:00:00.039][2] CPU2: Booted secondary processor [517f803c]
142<6>[    0.051566 / 01-01 00:00:00.049][3] CPU3: Booted secondary processor [517f803c]
143<6>[    0.061442 / 01-01 00:00:00.059][4] CPU4: Booted secondary processor [516f802d]
144<6>[    0.071109 / 01-01 00:00:00.059][5] CPU5: Booted secondary processor [516f802d]
145<6>[    0.080900 / 01-01 00:00:00.079][6] CPU6: Booted secondary processor [516f802d]
146<6>[    0.090840 / 01-01 00:00:00.079][7] CPU7: Booted secondary processor [516f802d]
147<6>[    0.091016 / 01-01 00:00:00.089][0] Brought up 8 CPUs
148<6>[    0.091059 / 01-01 00:00:00.089][0] SMP: Total of 8 processors activated.
149<6>[    0.091067 / 01-01 00:00:00.089][0] CPU features: detected feature: GIC system register CPU interface
150<6>[    0.091073 / 01-01 00:00:00.089][0] CPU features: detected feature: Privileged Access Never
151<6>[    0.091078 / 01-01 00:00:00.089][0] CPU features: detected feature: User Access Override
152<6>[    0.091085 / 01-01 00:00:00.089][0] CPU features: detected feature: 32-bit EL0 Support
153<6>[    0.091092 / 01-01 00:00:00.089][0] CPU features: detected feature: Kernel page table isolation (KPTI)
154<6>[    0.160985 / 01-01 00:00:00.159][0] CPU: All CPU(s) started at EL1
155<6>[    0.161045 / 01-01 00:00:00.159][0] alternatives: patching kernel code
156<6>[    0.162561 / 01-01 00:00:00.159][0] CPU7: update max cpu_capacity 1024
157<6>[    0.238901 / 01-01 00:00:00.229][1] CPU1: update max cpu_capacity 1024
158<6>[    0.240598 / 01-01 00:00:00.239][3] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
159<6>[    0.240614 / 01-01 00:00:00.239][3] futex hash table entries: 2048 (order: 6, 262144 bytes)
160<6>[    0.247197 / 01-01 00:00:00.239][3] pinctrl core: initialized pinctrl subsystem
161<6>[    0.247842 / 01-01 00:00:00.239][3] NET: Registered protocol family 16
162<6>[    0.249857 / 01-01 00:00:00.239][2] schedtune: init normalization constants...
163<6>[    0.249871 / 01-01 00:00:00.239][2] schedtune: CLUSTER[0-3]      min_pwr:     1 max_pwr:    17
164<6>[    0.249880 / 01-01 00:00:00.239][2] schedtune: CPU[0]            min_pwr:     4 max_pwr:   160
165<6>[    0.249886 / 01-01 00:00:00.239][2] schedtune: CPU[1]            min_pwr:     4 max_pwr:   160
166<6>[    0.249894 / 01-01 00:00:00.239][2] schedtune: CPU[2]            min_pwr:     4 max_pwr:   160
167<6>[    0.249901 / 01-01 00:00:00.239][2] schedtune: CPU[3]            min_pwr:     4 max_pwr:   160
168<6>[    0.249908 / 01-01 00:00:00.239][2] schedtune: CLUSTER[4-7]      min_pwr:     1 max_pwr:   190
169<6>[    0.249916 / 01-01 00:00:00.239][2] schedtune: CPU[4]            min_pwr:    40 max_pwr: 60000
170<6>[    0.249925 / 01-01 00:00:00.239][2] schedtune: CPU[5]            min_pwr:    40 max_pwr: 60000
171<6>[    0.249932 / 01-01 00:00:00.239][2] schedtune: CPU[6]            min_pwr:    40 max_pwr: 60000
172<6>[    0.249941 / 01-01 00:00:00.239][2] schedtune: CPU[7]            min_pwr:    40 max_pwr: 60000
173<6>[    0.249948 / 01-01 00:00:00.239][2] schedtune: SYSTEM            min_pwr:   178 max_pwr: 240847
174<6>[    0.249957 / 01-01 00:00:00.239][2] schedtune: using normalization constants mul: 383241808 sh1: 1 sh2: 17
175<6>[    0.249965 / 01-01 00:00:00.239][2] schedtune: verify normalization constants...
176<6>[    0.249972 / 01-01 00:00:00.239][2] schedtune: max_pwr/2^0: 240669 => norm_pwr:  1024
177<6>[    0.249979 / 01-01 00:00:00.239][2] schedtune: max_pwr/2^1: 120334 => norm_pwr:   511
178<6>[    0.249985 / 01-01 00:00:00.239][2] schedtune: max_pwr/2^2: 60167 => norm_pwr:   255
179<6>[    0.249991 / 01-01 00:00:00.239][2] schedtune: max_pwr/2^3: 30083 => norm_pwr:   127
180<6>[    0.249997 / 01-01 00:00:00.239][2] schedtune: max_pwr/2^4: 15041 => norm_pwr:    63
181<6>[    0.250004 / 01-01 00:00:00.239][2] schedtune: max_pwr/2^5: 7520 => norm_pwr:    31
182<6>[    0.250010 / 01-01 00:00:00.239][2] schedtune: configured to support 5 boost groups
183<6>[    0.251683 / 01-01 00:00:00.249][3] cpuidle: using governor menu
184<6>[    0.252860 / 01-01 00:00:00.249][2] cpuidle: using governor qcom
185<6>[    0.258692 / 01-01 00:00:00.249][2] vdso: 2 pages (1 code @ ffffff94a4807000, 1 data @ ffffff94a5804000)
186<6>[    0.258708 / 01-01 00:00:00.249][2] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
187<6>[    0.259338 / 01-01 00:00:00.249][2] DMA: preallocated 256 KiB pool for atomic allocations
188<3>[    0.259432 / 01-01 00:00:00.249][2] msm_smem_init: unable to create logging context
189<3>[    0.259453 / 01-01 00:00:00.249][2] <CORE> glink_init: unable to create log context
190<6>[    0.260091 / 01-01 00:00:00.259][2] exit: IPA_USB init success!
191<3>[    0.260154 / 01-01 00:00:00.259][2] Failed to create IPC log0
192<3>[    0.260160 / 01-01 00:00:00.259][2] Failed to create IPC log1
193<3>[    0.260165 / 01-01 00:00:00.259][2] Failed to create IPC log2
194<3>[    0.260169 / 01-01 00:00:00.259][2] Failed to create IPC log3
195<3>[    0.260174 / 01-01 00:00:00.259][2] Failed to create IPC log4
196<4>[    0.262989 / 01-01 00:00:00.259][3] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
197<4>[    0.263072 / 01-01 00:00:00.259][3] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
198<4>[    0.263322 / 01-01 00:00:00.259][3] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
199<3>[    0.263490 / 01-01 00:00:00.259][3] qupv3_geni_se 8c0000.qcom,qupv3_0_geni_se: geni_se_probe Failed to allocate log context
200<4>[    0.263611 / 01-01 00:00:00.259][3] irq: no irq domain found for /soc/pinctrl@03400000 !
201<3>[    0.264000 / 01-01 00:00:00.259][3] qupv3_geni_se ac0000.qcom,qupv3_1_geni_se: geni_se_probe Failed to allocate log context
202<6>[    0.268692 / 01-01 00:00:00.259][3] panic-handler: free[@0xb0100000+@0x1800000)
203<6>[    0.269018 / 01-01 00:00:00.259][2] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
204<6>[    0.271079 / 01-01 00:00:00.269][3] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0x8e000000
205<6>[    0.271196 / 01-01 00:00:00.269][3] platform 17300000.qcom,lpass: assigned reserved memory node adsp_region@0x8c500000
206<6>[    0.271287 / 01-01 00:00:00.269][3] platform 5c00000.qcom,ssc: assigned reserved memory node slpi_region@0x96700000
207<6>[    0.271807 / 01-01 00:00:00.269][3] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@0x97b00000
208<6>[    0.271982 / 01-01 00:00:00.269][3] msm_watchdog 17980000.qcom,wdt: wdog absent resource not present
209<6>[    0.272009 / 01-01 00:00:00.269][3] msm_watchdog 17980000.qcom,wdt: No need to allocate memory for scandumps
210<6>[    0.275422 / 01-01 00:00:00.269][2] msm_watchdog 17980000.qcom,wdt: MSM Watchdog Initialized
211<6>[    0.275477 / 01-01 00:00:00.269][2] platform 8300000.qcom,turing: assigned reserved memory node cdsp_region@0x95d00000
212<6>[    0.275706 / 01-01 00:00:00.269][2] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
213<6>[    0.275889 / 01-01 00:00:00.269][2] platform aae0000.qcom,venus: assigned reserved memory node video_region@0x95800000
214<3>[    0.277548 / 01-01 00:00:00.269][2] <CORE> glink_core_register_transport: unable to create log context for [spss:mailbox]
215<3>[    0.277596 / 01-01 00:00:00.269][2] <CORE> glink_mailbox_probe: unable to create log context for [spss:mailbox]
216<3>[    0.283387 / 01-01 00:00:00.279][3] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
217<3>[    0.283461 / 01-01 00:00:00.279][3] <CORE> glink_smem_native_probe: unable to create log context for [mpss:smem]
218<3>[    0.284007 / 01-01 00:00:00.279][3] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
219<3>[    0.284088 / 01-01 00:00:00.279][3] <CORE> glink_smem_native_probe: unable to create log context for [lpass:smem]
220<3>[    0.284631 / 01-01 00:00:00.279][3] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
221<3>[    0.284685 / 01-01 00:00:00.279][3] <CORE> glink_smem_native_probe: unable to create log context for [dsps:smem]
222<3>[    0.285292 / 01-01 00:00:00.279][3] <CORE> glink_core_register_transport: unable to create log context for [cdsp:smem]
223<3>[    0.285352 / 01-01 00:00:00.279][3] <CORE> glink_smem_native_probe: unable to create log context for [cdsp:smem]
224<6>[    0.286323 / 01-01 00:00:00.279][3] sps:sps is ready.
225<3>[    0.286978 / 01-01 00:00:00.279][3] (NULL device *): msm_gsi_probe:3145 failed to create IPC log, continue...
226<6>[    0.287281 / 01-01 00:00:00.279][3] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@0x8c400000
227<3>[    0.291751 / 01-01 00:00:00.289][3] msm-dcc 10a2000.dcc_v2: DCC list passed 2
228<6>[    0.292830 / 01-01 00:00:00.289][3] msm-dcc 10a2000.dcc_v2: All values written to enable
229<3>[    0.292839 / 01-01 00:00:00.289][3] msm-dcc 10a2000.dcc_v2: Set s_dcc_drvdata to ffffffd374e5b018, drvdata is ffffffd374e5b018
230<6>[    0.293377 / 01-01 00:00:00.289][3] platform soc:mem_dump: assigned reserved memory node mem_dump_region
231<3>[    0.303513 / 01-01 00:00:00.299][3] Minidump: size should be 4 byte aligned
232<3>[    0.303521 / 01-01 00:00:00.299][3] Failed to add entry in Minidump table
233<6>[    0.306145 / 01-01 00:00:00.299][3] pm8998_s9_level: supplied by pm8998_s6_level
234<6>[    0.306172 / 01-01 00:00:00.299][3] pm8998_s9_level: Bringing 1uV into 17-17uV
235<6>[    0.306305 / 01-01 00:00:00.299][3] pm8998_s9_level_ao: supplied by pm8998_s6_level_ao
236<6>[    0.306338 / 01-01 00:00:00.299][3] pm8998_s9_level_ao: Bringing 1uV into 17-17uV
237<6>[    0.314199 / 01-01 00:00:00.309][0] pm8998_l24: supplied by pm8998_l12
238<6>[    0.315726 / 01-01 00:00:00.309][0] pm8998_lvs1: Bringing 1uV into 1800000-1800000uV
239<6>[    0.316096 / 01-01 00:00:00.309][0] pm8998_lvs2: Bringing 1uV into 1800000-1800000uV
240<3>[    0.328470 / 01-01 00:00:00.319][0] sdm845-v2-pinctrl 3400000.pinctrl: invalid resource
241<6>[    0.331828 / 01-01 00:00:00.329][0] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0x8c415000
242<6>[    0.341608 / 01-01 00:00:00.339][0] pstore: using zlib compression
243<6>[    0.342925 / 01-01 00:00:00.339][0] console [pstore0] enabled
244<6>[    0.342934 / 01-01 00:00:00.339][0] pstore: Registered ramoops as persistent store backend
245<6>[    0.342944 / 01-01 00:00:00.339][0] ramoops: attached 0x80000@0xb0000000, ecc: 0/0
246<6>[    0.363036 / 01-01 00:00:00.359][3] gpu_cx_gdsc: supplied by pm8998_s9_level
247<6>[    0.366692 / 01-01 00:00:00.359][0] clk: cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac6f000.qcom,bps
248<6>[    0.366942 / 01-01 00:00:00.359][0] clk: cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac6f000.qcom,bps
249<6>[    0.367130 / 01-01 00:00:00.359][0] clk: cam_cc_cci_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac4a000.qcom,cci
250<6>[    0.367283 / 01-01 00:00:00.359][0] clk: cam_cc_cci_clk_src: set OPP pair(100000000 Hz: 257 uV) on ac4a000.qcom,cci
251<6>[    0.367470 / 01-01 00:00:00.359][0] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac65000.qcom,csiphy
252<6>[    0.367576 / 01-01 00:00:00.359][0] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac65000.qcom,csiphy
253<6>[    0.367733 / 01-01 00:00:00.359][0] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac66000.qcom,csiphy
254<6>[    0.367839 / 01-01 00:00:00.359][0] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac66000.qcom,csiphy
255<6>[    0.368013 / 01-01 00:00:00.359][0] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac67000.qcom,csiphy
256<6>[    0.368111 / 01-01 00:00:00.359][0] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac67000.qcom,csiphy
257<6>[    0.368312 / 01-01 00:00:00.359][0] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
258<6>[    0.368411 / 01-01 00:00:00.359][0] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac68000.qcom,csiphy
259<6>[    0.368892 / 01-01 00:00:00.359][0] clk: cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac00000.qcom,a5
260<6>[    0.369100 / 01-01 00:00:00.359][0] clk: cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
261<6>[    0.369406 / 01-01 00:00:00.359][0] clk: cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on acaf000.qcom,vfe0
262<6>[    0.369648 / 01-01 00:00:00.359][0] clk: cam_cc_ife_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acaf000.qcom,vfe0
263<6>[    0.369895 / 01-01 00:00:00.359][0] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb3000.qcom,csid0
264<6>[    0.370076 / 01-01 00:00:00.369][0] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acb3000.qcom,csid0
265<6>[    0.370376 / 01-01 00:00:00.369][0] clk: cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb6000.qcom,vfe1
266<6>[    0.370632 / 01-01 00:00:00.369][0] clk: cam_cc_ife_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb6000.qcom,vfe1
267<6>[    0.370903 / 01-01 00:00:00.369][0] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acba000.qcom,csid1
268<6>[    0.371065 / 01-01 00:00:00.369][0] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acba000.qcom,csid1
269<6>[    0.371349 / 01-01 00:00:00.369][0] clk: cam_cc_ife_lite_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc4000.qcom,vfe-lite
270<6>[    0.371604 / 01-01 00:00:00.369][0] clk: cam_cc_ife_lite_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite
271<6>[    0.371898 / 01-01 00:00:00.369][0] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc8000.qcom,csid-lite
272<6>[    0.372040 / 01-01 00:00:00.369][0] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acc8000.qcom,csid-lite
273<6>[    0.372487 / 01-01 00:00:00.369][0] clk: cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac87000.qcom,ipe0
274<6>[    0.372740 / 01-01 00:00:00.369][0] clk: cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac87000.qcom,ipe0
275<6>[    0.373235 / 01-01 00:00:00.369][0] clk: cam_cc_ipe_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac91000.qcom,ipe1
276<6>[    0.373497 / 01-01 00:00:00.369][0] clk: cam_cc_ipe_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac91000.qcom,ipe1
277<6>[    0.376314 / 01-01 00:00:00.369][0] cam_cc-sdm845 ad00000.qcom,camcc: Registered Camera CC clocks
278<6>[    0.377792 / 01-01 00:00:00.369][0] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
279<6>[    0.378913 / 01-01 00:00:00.369][0] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
280<6>[    0.380820 / 01-01 00:00:00.379][0] disp_cc-sdm845 af00000.qcom,dispcc: Registered Display CC clocks
281<6>[    0.400395 / 01-01 00:00:00.399][0] gcc-sdm845 100000.qcom,gcc: Registered GCC clocks
282<6>[    0.401959 / 01-01 00:00:00.399][0] clk: gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
283<6>[    0.402063 / 01-01 00:00:00.399][0] clk: gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 506a000.qcom,gmu
284<6>[    0.402293 / 01-01 00:00:00.399][0] gpu_cc-sdm845 5090000.qcom,gpucc: Registered GPU CC clocks
285<6>[    0.403231 / 01-01 00:00:00.399][0] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
286<6>[    0.403567 / 01-01 00:00:00.399][0] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(710000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
287<6>[    0.403631 / 01-01 00:00:00.399][0] gfxcc-sdm845 5090000.qcom,gfxcc: Registered GFX CC clocks
288<6>[    0.404879 / 01-01 00:00:00.399][0] video_cc-sdm845 ab00000.qcom,videocc: Registered Video CC clocks
289<6>[    0.406131 / 01-01 00:00:00.399][0] KPI: Bootloader start count = 56943
290<6>[    0.406140 / 01-01 00:00:00.399][0] KPI: Bootloader end count = 502791
291<6>[    0.406147 / 01-01 00:00:00.399][0] KPI: Bootloader display count = 1707073343
292<6>[    0.406154 / 01-01 00:00:00.399][0] KPI: Bootloader load kernel count = 3421979712
293<6>[    0.406164 / 01-01 00:00:00.399][0] KPI: Kernel MPM timestamp = 523335
294<6>[    0.406171 / 01-01 00:00:00.399][0] KPI: Kernel MPM Clock frequency = 32768
295<6>[    0.406199 / 01-01 00:00:00.399][0] socinfo_print: v0.15, id=321, ver=2.1, raw_id=139, raw_ver=2, hw_plat=8, hw_plat_ver=786432
296<6>[    0.406199 / 01-01 00:00:00.399][0]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=3 serial_number=3052981974 num_pmics=3 chip_family=0x4f raw_device_family=0x6 raw_device_number=0x0 nproduct_id=0x3f4 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0x6 ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
297<3>[    0.406242 / 01-01 00:00:00.399][0] Minidump: SMEM is not initialized.
298<3>[    0.406250 / 01-01 00:00:00.399][0] msm_bus_fabric_rpmh_init_driver
299<3>[    0.406503 / 01-01 00:00:00.399][0] msm_bus: Probe started
300<4>[    0.407123 / 01-01 00:00:00.399][0] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
301<4>[    0.407175 / 01-01 00:00:00.399][0] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
302<4>[    0.407194 / 01-01 00:00:00.399][0] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
303<4>[    0.407246 / 01-01 00:00:00.399][0] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
304<3>[    0.409266 / 01-01 00:00:00.409][0] msm_bus: DT Parsing complete
305<3>[    0.412319 / 01-01 00:00:00.409][0] msm_bus_fab_init_noc_ops: Invalid Bus type
306<3>[    0.412481 / 01-01 00:00:00.409][0] msm_bus_fab_init_noc_ops: Invalid Bus type
307<3>[    0.412524 / 01-01 00:00:00.409][0] msm_bus_fab_init_noc_ops: Invalid Bus type
308<3>[    0.412689 / 01-01 00:00:00.419][0] msm_bus_fab_init_noc_ops: Invalid Bus type
309<6>[    0.426561 / 01-01 00:00:00.419][0] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_dvdd_en/judy_camera_rear_dvdd_en_default, deferring probe
310<6>[    0.426674 / 01-01 00:00:00.419][0] camera_rear_avdd_ldo: supplied by pmi8998_bob
311<6>[    0.426983 / 01-01 00:00:00.419][0] reg-fixed-voltage 3.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_dvdd_en/judy_camera_wide_dvdd_en_default, deferring probe
312<6>[    0.427006 / 01-01 00:00:00.419][0] reg-fixed-voltage 4.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_avdd_en/judy_camera_wide_avdd_en_default, deferring probe
313<6>[    0.427025 / 01-01 00:00:00.419][0] reg-fixed-voltage 5.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_iovdd_en/judy_camera_wide_iovdd_en_default, deferring probe
314<6>[    0.427043 / 01-01 00:00:00.419][0] reg-fixed-voltage 6.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_front_dvdd_en/judy_camera_front_dvdd_en_default, deferring probe
315<6>[    0.427062 / 01-01 00:00:00.419][0] reg-fixed-voltage 7.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois_en/judy_camera_rear_ois_en_default, deferring probe
316<6>[    0.427083 / 01-01 00:00:00.419][0] reg-fixed-voltage 8.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois2_en/judy_camera_rear_ois2_en_default, deferring probe
317<6>[    0.427106 / 01-01 00:00:00.419][0] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
318<5>[    0.428121 / 01-01 00:00:00.419][0] arm-smmu 5040000.arm,smmu-kgsl: 	(IDR0.CTTW overridden by dma-coherent property)
319<5>[    0.428248 / 01-01 00:00:00.419][0] arm-smmu 5040000.arm,smmu-kgsl: 	stream matching with 5 register groups, mask 0x7
320<3>[    0.428416 / 01-01 00:00:00.419][0] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
321<3>[    0.431070 / 01-01 00:00:00.429][3] register_client_adhoc:find path.src 139 dest 627
322<3>[    0.431280 / 01-01 00:00:00.429][3] register_client_adhoc:Client handle 1 apps_smmu
323<5>[    0.431516 / 01-01 00:00:00.429][0] arm-smmu 15000000.apps-smmu: 	(IDR0.CTTW overridden by dma-coherent property)
324<5>[    0.431629 / 01-01 00:00:00.429][0] arm-smmu 15000000.apps-smmu: 	stream matching with 76 register groups, mask 0x7fff
325<3>[    0.432375 / 01-01 00:00:00.429][0] arm-smmu 15000000.apps-smmu: found 64 context interrupt(s) but have 45 context banks. assuming 45 context interrupts.
326<3>[    0.432983 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 139 dest 627
327<3>[    0.433134 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 2 apps_smmu
328<3>[    0.433401 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 139 dest 627
329<3>[    0.433532 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 3 apps_smmu
330<3>[    0.433777 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 22 dest 773
331<3>[    0.433853 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
332<3>[    0.434074 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 22 dest 773
333<3>[    0.434142 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu
334<3>[    0.434356 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 137 dest 772
335<3>[    0.434432 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 6 mnoc_sf_0_tbu
336<3>[    0.434583 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 139 dest 627
337<3>[    0.434728 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 7 apps_smmu
338<3>[    0.434940 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 139 dest 627
339<3>[    0.435069 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 8 apps_smmu
340<3>[    0.435292 / 01-01 00:00:00.429][0] register_client_adhoc:find path.src 139 dest 627
341<3>[    0.435417 / 01-01 00:00:00.429][0] register_client_adhoc:Client handle 9 apps_smmu
342<6>[    0.436373 / 01-01 00:00:00.429][0] iommu: Adding device ae00000.qcom,mdss_mdp to group 0
343<6>[    0.436538 / 01-01 00:00:00.429][0] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 1
344<6>[    0.436700 / 01-01 00:00:00.429][0] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 2
345<6>[    0.436894 / 01-01 00:00:00.429][0] iommu: Adding device 1de0000.qcedev to group 3
346<6>[    0.437047 / 01-01 00:00:00.429][0] iommu: Adding device 1de0000.qcrypto to group 4
347<6>[    0.437198 / 01-01 00:00:00.429][0] iommu: Adding device 18800000.qcom,icnss to group 5
348<6>[    0.437350 / 01-01 00:00:00.429][0] iommu: Adding device 800000.qcom,gpi-dma to group 6
349<6>[    0.437502 / 01-01 00:00:00.429][0] iommu: Adding device a00000.qcom,gpi-dma to group 7
350<6>[    0.437653 / 01-01 00:00:00.429][0] iommu: Adding device 88a7000.msm_tspp to group 8
351<6>[    0.437811 / 01-01 00:00:00.429][0] iommu: Adding device soc:apps_iommu_test_device to group 8
352<6>[    0.437960 / 01-01 00:00:00.429][0] iommu: Adding device soc:apps_iommu_coherent_test_device to group 8
353<6>[    0.438143 / 01-01 00:00:00.429][0] iommu: Adding device soc:qcom,msm-audio-ion to group 9
354<6>[    0.438305 / 01-01 00:00:00.429][0] iommu: Adding device a600000.ssusb to group 10
355<6>[    0.438457 / 01-01 00:00:00.429][0] iommu: Adding device soc:usb_audio_qmi_dev to group 11
356<6>[    0.439929 / 01-01 00:00:00.429][0] vgaarb: loaded
357<5>[    0.440166 / 01-01 00:00:00.439][0] SCSI subsystem initialized
358<6>[    0.440310 / 01-01 00:00:00.439][0] usbcore: registered new interface driver usbfs
359<6>[    0.440345 / 01-01 00:00:00.439][0] usbcore: registered new interface driver hub
360<6>[    0.440514 / 01-01 00:00:00.439][0] usbcore: registered new device driver usb
361<4>[    0.441127 / 01-01 00:00:00.439][0] soc:usb_nop_phy supply vcc not found, using dummy regulator
362<6>[    0.441527 / 01-01 00:00:00.439][0] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
363<6>[    0.441563 / 01-01 00:00:00.439][0] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
364<6>[    0.441788 / 01-01 00:00:00.439][0] input: qpnp_pon as /devices/virtual/input/input0
365<6>[    0.442468 / 01-01 00:00:00.439][0] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
366<6>[    0.442527 / 01-01 00:00:00.439][0] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
367<6>[    0.442559 / 01-01 00:00:00.439][0] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
368<6>[    0.442994 / 01-01 00:00:00.439][0] media: Linux media interface: v0.10
369<6>[    0.443022 / 01-01 00:00:00.439][0] Linux video capture interface: v2.00
370<3>[    0.451849 / 01-01 00:00:00.449][0] virt zone: sensor[xo-therm-adc] read error:-22
371<4>[    0.451864 / 01-01 00:00:00.449][0] thermal thermal_zone70: failed to read out thermal zone (-22)
372<3>[    0.455011 / 01-01 00:00:00.449][3] qpnp_set_scale: H/W rev[12:2] set LUT scale to 60
373<3>[    0.455216 / 01-01 00:00:00.449][3] Unable to get pmic_revid rc=-22
374<6>[    0.457319 / 01-01 00:00:00.449][3] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
375<6>[    0.457447 / 01-01 00:00:00.449][3] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x8ab00000
376<6>[    0.457539 / 01-01 00:00:00.449][3] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
377<6>[    0.457620 / 01-01 00:00:00.449][3] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node secure_sp_region
378<6>[    0.457698 / 01-01 00:00:00.449][3] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
379<6>[    0.457908 / 01-01 00:00:00.449][3] ION heap system created
380<6>[    0.458060 / 01-01 00:00:00.449][2] ION heap adsp created at 0x00000000f3400000 with size 1000000
381<6>[    0.458077 / 01-01 00:00:00.449][2] ION heap qsecom created at 0x00000000b2000000 with size 1800000
382<6>[    0.458091 / 01-01 00:00:00.449][2] ION heap qsecom_ta created at 0x00000000f2400000 with size 1000000
383<6>[    0.458105 / 01-01 00:00:00.449][2] ION heap spss created at 0x00000000efc00000 with size 800000
384<6>[    0.458119 / 01-01 00:00:00.449][2] ION heap secure_display created at 0x00000000f4400000 with size b800000
385<6>[    0.458133 / 01-01 00:00:00.449][2] ION heap secure_heap created
386<3>[    0.458823 / 01-01 00:00:00.449][2] ipa ipa3_tz_unlock_reg:4882 Bad parameters
387<3>[    0.458835 / 01-01 00:00:00.449][2] ipa ipa3_pre_init:5082 Failed to unlock memory region using TZ
388<3>[    0.458923 / 01-01 00:00:00.449][2] register_client_adhoc:find path.src 90 dest 512
389<3>[    0.459330 / 01-01 00:00:00.449][2] register_client_adhoc:find path.src 90 dest 585
390<3>[    0.459456 / 01-01 00:00:00.449][2] register_client_adhoc:find path.src 1 dest 676
391<3>[    0.459668 / 01-01 00:00:00.449][2] register_client_adhoc:find path.src 143 dest 777
392<3>[    0.459738 / 01-01 00:00:00.459][0] register_client_adhoc:Client handle 10 ipa
393<3>[    0.460236 / 01-01 00:00:00.459][0] ipa ipa3_uc_state_check:284 uC interface not initialized
394<3>[    0.460869 / 01-01 00:00:00.459][0] ipa ipa3_uc_state_check:284 uC interface not initialized
395<6>[    0.461383 / 01-01 00:00:00.459][0] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 12
396<6>[    0.461627 / 01-01 00:00:00.459][0] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 13
397<6>[    0.461859 / 01-01 00:00:00.459][0] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 14
398<6>[    0.462737 / 01-01 00:00:00.459][0] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
399<6>[    0.462865 / 01-01 00:00:00.459][0] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
400<6>[    0.462987 / 01-01 00:00:00.459][0] PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
401<7>[    0.463651 / 01-01 00:00:00.459][0] msm_ext_disp_extcon_register: extcon registration done
402<7>[    0.463750 / 01-01 00:00:00.459][0] msm_ext_disp_probe: msm_ext_disp_probe: Added child devices.
403<6>[    0.464375 / 01-01 00:00:00.459][2] Advanced Linux Sound Architecture Driver Initialized.
404<6>[    0.464800 / 01-01 00:00:00.459][2] Bluetooth: Core ver 2.22
405<6>[    0.464825 / 01-01 00:00:00.459][2] NET: Registered protocol family 31
406<6>[    0.464833 / 01-01 00:00:00.459][2] Bluetooth: HCI device and connection manager initialized
407<6>[    0.464847 / 01-01 00:00:00.459][2] Bluetooth: HCI socket layer initialized
408<6>[    0.464859 / 01-01 00:00:00.459][2] Bluetooth: L2CAP socket layer initialized
409<6>[    0.464909 / 01-01 00:00:00.459][2] Bluetooth: SCO socket layer initialized
410<6>[    0.465261 / 01-01 00:00:00.459][3] NetLabel: Initializing
411<6>[    0.465270 / 01-01 00:00:00.459][3] NetLabel:  domain hash size = 128
412<6>[    0.465278 / 01-01 00:00:00.459][3] NetLabel:  protocols = UNLABELED CIPSOv4
413<6>[    0.465324 / 01-01 00:00:00.459][3] NetLabel:  unlabeled traffic allowed by default
414<1>[    0.465381 / 01-01 00:00:00.459][3] pcie:pcie_init.
415<3>[    0.465390 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie0-short
416<3>[    0.465399 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie0-long
417<3>[    0.465407 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie0-dump
418<3>[    0.465416 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie1-short
419<3>[    0.465424 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie1-long
420<3>[    0.465431 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie1-dump
421<3>[    0.465441 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie2-short
422<3>[    0.465448 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie2-long
423<3>[    0.465455 / 01-01 00:00:00.459][3] pcie_init: unable to create IPC log context for pcie2-dump
424<6>[    0.467515 / 01-01 00:00:00.459][3] spmi spmi-1: SPMI PMIC arbiter debug bus controller added
425<6>[    0.468985 / 01-01 00:00:00.459][3] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
426<6>[    0.469271 / 01-01 00:00:00.459][3] gpu_gx_gdsc: supplied by pm8005_s1_level
427<6>[    0.471038 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu0
428<6>[    0.471811 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (1766400000 Hz, 828000 uv) on cpu0
429<6>[    0.471900 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu1
430<6>[    0.472558 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (1766400000 Hz, 828000 uv) on cpu1
431<6>[    0.472620 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu2
432<6>[    0.473299 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (1766400000 Hz, 828000 uv) on cpu2
433<6>[    0.473360 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu3
434<6>[    0.474023 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (1766400000 Hz, 828000 uv) on cpu3
435<6>[    0.474081 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (825600000 Hz, 636000 uv) on cpu4
436<6>[    0.475050 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu4
437<6>[    0.475119 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (825600000 Hz, 636000 uv) on cpu5
438<6>[    0.476139 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu5
439<6>[    0.476196 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (825600000 Hz, 636000 uv) on cpu6
440<6>[    0.477225 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu6
441<6>[    0.477285 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (825600000 Hz, 636000 uv) on cpu7
442<6>[    0.478305 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu7
443<6>[    0.478628 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on soc:qcom,l3-cpu0
444<6>[    0.478637 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on soc:qcom,l3-cpu4
445<6>[    0.478645 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on soc:qcom,l3-cdsp
446<6>[    0.478653 / 01-01 00:00:00.469][3] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on 5000000.qcom,kgsl-3d0
447<6>[    0.480735 / 01-01 00:00:00.479][3] clk: add_opp: Set OPP pair (1478400000 Hz, 848000 uv) on soc:qcom,l3-cpu0
448<6>[    0.480744 / 01-01 00:00:00.479][3] clk: add_opp: Set OPP pair (1478400000 Hz, 848000 uv) on soc:qcom,l3-cpu4
449<6>[    0.480753 / 01-01 00:00:00.479][3] clk: add_opp: Set OPP pair (1478400000 Hz, 848000 uv) on soc:qcom,l3-cdsp
450<6>[    0.480761 / 01-01 00:00:00.479][3] clk: add_opp: Set OPP pair (1478400000 Hz, 848000 uv) on 5000000.qcom,kgsl-3d0
451<6>[    0.481416 / 01-01 00:00:00.479][3] cpufreq: driver osm-cpufreq up and running
452<6>[    0.481425 / 01-01 00:00:00.479][3] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
453<6>[    0.481476 / 01-01 00:00:00.479][3] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_dvdd_en/judy_camera_rear_dvdd_en_default, deferring probe
454<6>[    0.481529 / 01-01 00:00:00.479][3] reg-fixed-voltage 3.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_dvdd_en/judy_camera_wide_dvdd_en_default, deferring probe
455<6>[    0.481573 / 01-01 00:00:00.479][3] reg-fixed-voltage 4.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_avdd_en/judy_camera_wide_avdd_en_default, deferring probe
456<6>[    0.481616 / 01-01 00:00:00.479][3] reg-fixed-voltage 5.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_iovdd_en/judy_camera_wide_iovdd_en_default, deferring probe
457<6>[    0.481659 / 01-01 00:00:00.479][3] reg-fixed-voltage 6.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_front_dvdd_en/judy_camera_front_dvdd_en_default, deferring probe
458<6>[    0.481699 / 01-01 00:00:00.479][3] reg-fixed-voltage 7.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois_en/judy_camera_rear_ois_en_default, deferring probe
459<6>[    0.481742 / 01-01 00:00:00.479][3] reg-fixed-voltage 8.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois2_en/judy_camera_rear_ois2_en_default, deferring probe
460<6>[    0.481786 / 01-01 00:00:00.479][3] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
461<6>[    0.481932 / 01-01 00:00:00.479][3] [Display] overwrite_wled_strings: overwrite WLED strings, num_strings=4
462<6>[    0.483868 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
463<6>[    0.483878 / 01-01 00:00:00.479][3] CPU0: update cpu_capacity 381
464<6>[    0.483889 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
465<6>[    0.483898 / 01-01 00:00:00.479][3] CPU1: update cpu_capacity 381
466<6>[    0.483908 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
467<6>[    0.483916 / 01-01 00:00:00.479][3] CPU2: update cpu_capacity 381
468<6>[    0.483929 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
469<6>[    0.483937 / 01-01 00:00:00.479][3] CPU3: update cpu_capacity 381
470<6>[    0.483951 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=4 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
471<6>[    0.483959 / 01-01 00:00:00.479][3] CPU4: update cpu_capacity 1024
472<6>[    0.483972 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=5 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
473<6>[    0.483980 / 01-01 00:00:00.479][3] CPU5: update cpu_capacity 1024
474<6>[    0.483993 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=6 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
475<6>[    0.484001 / 01-01 00:00:00.479][3] CPU6: update cpu_capacity 1024
476<6>[    0.484013 / 01-01 00:00:00.479][3] sched-energy energy-costs: cpu=7 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
477<6>[    0.484021 / 01-01 00:00:00.479][3] CPU7: update cpu_capacity 1024
478<6>[    0.485234 / 01-01 00:00:00.479][3] sched-energy energy-costs: Sched-energy-costs capacity updated
479<6>[    0.485283 / 01-01 00:00:00.479][3] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_dvdd_en/judy_camera_rear_dvdd_en_default, deferring probe
480<6>[    0.485334 / 01-01 00:00:00.479][3] reg-fixed-voltage 3.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_dvdd_en/judy_camera_wide_dvdd_en_default, deferring probe
481<6>[    0.485379 / 01-01 00:00:00.479][3] reg-fixed-voltage 4.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_avdd_en/judy_camera_wide_avdd_en_default, deferring probe
482<6>[    0.485420 / 01-01 00:00:00.479][3] reg-fixed-voltage 5.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_iovdd_en/judy_camera_wide_iovdd_en_default, deferring probe
483<6>[    0.485466 / 01-01 00:00:00.479][3] reg-fixed-voltage 6.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_front_dvdd_en/judy_camera_front_dvdd_en_default, deferring probe
484<6>[    0.485508 / 01-01 00:00:00.479][3] reg-fixed-voltage 7.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois_en/judy_camera_rear_ois_en_default, deferring probe
485<6>[    0.485551 / 01-01 00:00:00.479][3] reg-fixed-voltage 8.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois2_en/judy_camera_rear_ois2_en_default, deferring probe
486<6>[    0.485597 / 01-01 00:00:00.479][3] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
487<6>[    0.486255 / 01-01 00:00:00.479][4] clocksource: Switched to clocksource arch_sys_counter
488<6>[    0.490055 / 01-01 00:00:00.489][3] CPU3: update max cpu_capacity 381
489<5>[    0.498206 / 01-01 00:00:00.489][4] VFS: Disk quotas dquot_6.6.0
490<6>[    0.498259 / 01-01 00:00:00.489][4] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
491<6>[    0.498744 / 01-01 00:00:00.489][4] debugcc-sdm845 soc:qcom,cc-debug@100000: Registered debug mux successfully
492<6>[    0.499373 / 01-01 00:00:00.489][4] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
493<6>[    0.499382 / 01-01 00:00:00.489][4] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
494<4>[    0.499464 / 01-01 00:00:00.489][4] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
495<4>[    0.499473 / 01-01 00:00:00.489][4] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
496<4>[    0.499482 / 01-01 00:00:00.489][4] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
497<4>[    0.499490 / 01-01 00:00:00.489][4] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
498<4>[    0.499496 / 01-01 00:00:00.489][4] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
499<6>[    0.499773 / 01-01 00:00:00.489][4] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
500<6>[    0.499801 / 01-01 00:00:00.489][4] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
501<6>[    0.499808 / 01-01 00:00:00.489][4] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
502<4>[    0.499843 / 01-01 00:00:00.489][4] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
503<4>[    0.499849 / 01-01 00:00:00.489][4] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
504<4>[    0.499855 / 01-01 00:00:00.489][4] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
505<4>[    0.499863 / 01-01 00:00:00.489][4] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
506<4>[    0.499869 / 01-01 00:00:00.489][4] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
507<3>[    0.504944 / 01-01 00:00:00.499][4] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
508<6>[    0.505043 / 01-01 00:00:00.499][4] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=1, clocks successfully
509<6>[    0.505061 / 01-01 00:00:00.499][4] mdss_pll_probe: MDSS pll label = MDSS DP PLL
510<6>[    0.508152 / 01-01 00:00:00.499][4] NET: Registered protocol family 2
511<6>[    0.508496 / 01-01 00:00:00.499][4] CPU4: update max cpu_capacity 1024
512<6>[    0.508605 / 01-01 00:00:00.499][4] default registered
513<6>[    0.508614 / 01-01 00:00:00.499][4] default registered
514<6>[    0.508618 / 01-01 00:00:00.499][4] MPTCP: Stable release v0.93.0
515<6>[    0.508645 / 01-01 00:00:00.499][4] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
516<6>[    0.508705 / 01-01 00:00:00.499][4] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
517<6>[    0.508845 / 01-01 00:00:00.499][4] TCP: Hash tables configured (established 32768 bind 32768)
518<6>[    0.508880 / 01-01 00:00:00.499][4] UDP hash table entries: 2048 (order: 4, 65536 bytes)
519<6>[    0.508908 / 01-01 00:00:00.499][4] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
520<6>[    0.508999 / 01-01 00:00:00.499][4] NET: Registered protocol family 1
521<7>[    0.509015 / 01-01 00:00:00.499][4] PCI: CLS 0 bytes, default 128
522<6>[    0.509093 / 01-01 00:00:00.499][4] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_dvdd_en/judy_camera_rear_dvdd_en_default, deferring probe
523<6>[    0.509134 / 01-01 00:00:00.499][4] reg-fixed-voltage 3.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_dvdd_en/judy_camera_wide_dvdd_en_default, deferring probe
524<6>[    0.509155 / 01-01 00:00:00.499][4] reg-fixed-voltage 4.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_avdd_en/judy_camera_wide_avdd_en_default, deferring probe
525<6>[    0.509175 / 01-01 00:00:00.499][4] reg-fixed-voltage 5.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_wide_iovdd_en/judy_camera_wide_iovdd_en_default, deferring probe
526<6>[    0.509196 / 01-01 00:00:00.499][4] reg-fixed-voltage 6.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_front_dvdd_en/judy_camera_front_dvdd_en_default, deferring probe
527<6>[    0.509214 / 01-01 00:00:00.499][4] reg-fixed-voltage 7.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois_en/judy_camera_rear_ois_en_default, deferring probe
528<6>[    0.509235 / 01-01 00:00:00.499][4] reg-fixed-voltage 8.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/judy_camera_rear_ois2_en/judy_camera_rear_ois2_en_default, deferring probe
529<6>[    0.509254 / 01-01 00:00:00.499][4] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
530<6>[    0.509491 / 01-01 00:00:00.499][5] Trying to unpack rootfs image as initramfs...
531<6>[    0.697837 / 01-01 00:00:00.689][5] Freeing initrd memory: 13900K
532<6>[    0.698671 / 01-01 00:00:00.689][5] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
533<6>[    0.702553 / 01-01 00:00:00.699][5] audit: initializing netlink subsys (disabled)
534<5>[    0.702620 / 01-01 00:00:00.699][5] audit: type=2000 audit(0.699:1): initialized
535<5>[    0.703902 / 01-01 00:00:00.699][5] Initialise system trusted keyrings
536<6>[    0.704287 / 01-01 00:00:00.699][5] workingset: timestamp_bits=59 max_order=20 bucket_order=0
537<6>[    0.705922 / 01-01 00:00:00.699][4] Registering sdcardfs 0.1
538<6>[    0.705997 / 01-01 00:00:00.699][4] fuse init (API version 7.26)
539<7>[    0.706054 / 01-01 00:00:00.699][4] SELinux:  Registering netfilter hooks
540<6>[    0.706178 / 01-01 00:00:00.699][4] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
541<6>[    0.706184 / 01-01 00:00:00.699][4] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
542<6>[    0.706190 / 01-01 00:00:00.699][4] pfk [pfk_init]: Driver initialized successfully
543<5>[    0.709680 / 01-01 00:00:00.699][4] Key type asymmetric registered
544<5>[    0.709686 / 01-01 00:00:00.699][4] Asymmetric key parser 'x509' registered
545<6>[    0.709724 / 01-01 00:00:00.699][4] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
546<6>[    0.709731 / 01-01 00:00:00.699][4] io scheduler noop registered
547<6>[    0.709736 / 01-01 00:00:00.699][4] io scheduler deadline registered
548<6>[    0.709773 / 01-01 00:00:00.699][4] io scheduler cfq registered (default)
549<6>[    0.717103 / 01-01 00:00:00.709][4] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5b00: Registered qpnp_clkdiv_1 successfully
550<6>[    0.717162 / 01-01 00:00:00.709][4] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5c00: Registered qpnp_clkdiv_2 successfully
551<6>[    0.717218 / 01-01 00:00:00.709][4] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5d00: Registered qpnp_clkdiv_3 successfully
552<3>[    0.720106 / 01-01 00:00:00.719][4] glink_loopback_server_init: unable to create log context
553<3>[    0.720484 / 01-01 00:00:00.719][4] <CORE> glink_core_register_transport: unable to create log context for [wdsp:spi]
554<3>[    0.720862 / 01-01 00:00:00.719][4] msm_smp2p_init: unable to create log context
555<3>[    0.722222 / 01-01 00:00:00.719][4] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
556<3>[    0.722229 / 01-01 00:00:00.719][4] logging for Indications: Unable to create QMI IPC qmi_log_init
557<3>[    0.722676 / 01-01 00:00:00.719][4] icnss: Unable to create log context
558<3>[    0.722681 / 01-01 00:00:00.719][4] icnss: Unable to create log long context
559<6>[    0.723653 / 01-01 00:00:00.719][4] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
560<6>[    0.723718 / 01-01 00:00:00.719][4] icnss: Platform driver probed successfully
561<3>[    0.724423 / 01-01 00:00:00.719][4] register_client_adhoc:find path.src 125 dest 512
562<3>[    0.724596 / 01-01 00:00:00.719][4] register_client_adhoc:Client handle 11 scm_pas
563<3>[    0.724611 / 01-01 00:00:00.719][4] minidump-id not found for adsp
564<3>[    0.724714 / 01-01 00:00:00.719][4] minidump-id not found for slpi
565<3>[    0.724768 / 01-01 00:00:00.719][4] minidump-id not found for spss
566<6>[    0.724801 / 01-01 00:00:00.719][4] subsys-pil-tz 188101c.qcom,spss: for spss segments only will be dumped.
567<3>[    0.724947 / 01-01 00:00:00.719][4] minidump-id not found for cdsp
568<3>[    0.725193 / 01-01 00:00:00.719][4] register_client_adhoc:find path.src 63 dest 512
569<3>[    0.725286 / 01-01 00:00:00.719][4] register_client_adhoc:Client handle 12 pil-venus
570<3>[    0.725294 / 01-01 00:00:00.719][4] minidump-id not found for venus
571<6>[    0.725301 / 01-01 00:00:00.719][4] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
572<3>[    0.725384 / 01-01 00:00:00.719][4] minidump-id not found for ipa_fws
573<6>[    0.725390 / 01-01 00:00:00.719][4] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
574<3>[    0.725486 / 01-01 00:00:00.719][4] minidump-id not found for a630_zap
575<6>[    0.725492 / 01-01 00:00:00.719][4] subsys-pil-tz soc:qcom,kgsl-hyp: for a630_zap segments only will be dumped.
576<6>[    0.725730 / 01-01 00:00:00.719][4] pil_mss_loadable_init : pil mss loadable init..
577<6>[    0.725831 / 01-01 00:00:00.719][4] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
578<3>[    0.726423 / 01-01 00:00:00.719][4] qiib_driver_data_init: unable to create logging context
579<3>[    0.726765 / 01-01 00:00:00.719][4] LGE GPIO debugger init done
580<6>[    0.727977 / 01-01 00:00:00.719][4] LGE:bootlog_parse_dt: bootlog addr 0xb00c0000
581<6>[    0.728039 / 01-01 00:00:00.719][4] bootlog_probe: addr(0xb00c0000) start(0x202d2042) end(0xb00c6994) size(0x1fff0)
582<6>[    0.728043 / 01-01 00:00:00.719][4] -------------------------------------------------
583<6>[    0.728047 / 01-01 00:00:00.719][4] below logs are got from bootloader
584<6>[    0.728050 / 01-01 00:00:00.719][4] -------------------------------------------------
585<6>[    0.728130 / 01-01 00:00:00.719][4] B -    378779 - ddr remap_info cs0_0: 0x80000000, cs0_1: 0x80000000, cs1_0: 0x0, cs1_1: 0x0
586<6>[    0.728167 / 01-01 00:00:00.719][4] B -    378840 - do_ddr_training, Start
587<6>[    0.728200 / 01-01 00:00:00.719][4] B -    380182 - Frequency = 1355 MHz
588<6>[    0.728236 / 01-01 00:00:00.719][4] D -      1342 - do_ddr_training, Delta
589<6>[    0.728277 / 01-01 00:00:00.719][4] B -    380457 - ddr training is not required
590<6>[    0.728315 / 01-01 00:00:00.719][4] B -    380701 - getOperatorInXbl GLOBAL
591<6>[    0.728350 / 01-01 00:00:00.719][4] B -    381707 - power longkey release
592<6>[    0.728381 / 01-01 00:00:00.719][4] B -    381738 - pre longkey check
593<6>[    0.728413 / 01-01 00:00:00.719][4] B -    385367 - pImem Init Start
594<6>[    0.728448 / 01-01 00:00:00.719][4] D -      9729 - pImem Init End, Delta
595<6>[    0.728479 / 01-01 00:00:00.719][4] B -    396713 - clock_init, Start
596<6>[    0.728510 / 01-01 00:00:00.719][4] D -       213 - clock_init, Delta
597<6>[    0.728542 / 01-01 00:00:00.719][4] B -    397262 - Image Load, Start
598<6>[    0.728570 / 01-01 00:00:00.719][4] D -      6741 - Auth Metadata
599<6>[    0.728603 / 01-01 00:00:00.719][4] D -       214 - Segments hash check
600<6>[    0.728653 / 01-01 00:00:00.719][4] D -      7961 - APDP Image Loaded, Delta - (7828 Bytes)
601<6>[    0.728692 / 01-01 00:00:00.719][4] B -    405314 - usb: UFS Serial - b3d37981
602<6>[    0.728774 / 01-01 00:00:00.719][4] B -    405894 - PM: 0: PON=0x1:HARD_RESET: ON=0x80:PON_SEQ: POFF=0x2:PS_HOLD: OFF=0x80:POFF_SEQ
603<6>[    0.728866 / 01-01 00:00:00.719][4] B -    405955 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ: FAULT1=0x40:UVLO
604<6>[    0.728943 / 01-01 00:00:00.719][4] B -    405985 - PM: 2: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ
605<6>[    0.728987 / 01-01 00:00:00.719][4] B -    406016 - PM: SMEM Chgr Info Write Success
606<6>[    0.729019 / 01-01 00:00:00.719][4] B -    410652 - Image Load, Start
607<6>[    0.729049 / 01-01 00:00:00.719][4] D -      3477 - Auth Metadata
608<6>[    0.729082 / 01-01 00:00:00.719][4] D -     10004 - Segments hash check
609<6>[    0.729132 / 01-01 00:00:00.719][4] D -     20862 - AOP Image Loaded, Delta - (178632 Bytes)
610<6>[    0.729165 / 01-01 00:00:00.719][4] B -    431514 - Image Load, Start
611<6>[    0.729194 / 01-01 00:00:00.719][4] D -      3477 - Auth Metadata
612<6>[    0.729227 / 01-01 00:00:00.719][4] D -       305 - Segments hash check
613<6>[    0.729287 / 01-01 00:00:00.719][4] D -      5551 - QSEE Dev Config Image Loaded, Delta - (35108 Bytes)
614<6>[    0.729319 / 01-01 00:00:00.719][4] B -    437095 - Image Load, Start
615<6>[    0.729347 / 01-01 00:00:00.719][4] D -      9912 - Auth Metadata
616<6>[    0.729381 / 01-01 00:00:00.719][4] D -     10705 - Segments hash check
617<6>[    0.729433 / 01-01 00:00:00.719][4] D -     43066 - QSEE Image Loaded, Delta - (2035888 Bytes)
618<6>[    0.729465 / 01-01 00:00:00.719][4] B -    480192 - Image Load, Start
619<6>[    0.729504 / 01-01 00:00:00.719][4] B -    480405 - QFPROM flag != QFPROMblown
620<6>[    0.729551 / 01-01 00:00:00.719][4] D -       244 - SEC Image Loaded, Delta - (32 Bytes)
621<6>[    0.729582 / 01-01 00:00:00.719][4] B -    480527 - Image Load, Start
622<6>[    0.729611 / 01-01 00:00:00.719][4] D -      3538 - Auth Metadata
623<6>[    0.729644 / 01-01 00:00:00.719][4] D -      2410 - Segments hash check
624<6>[    0.729695 / 01-01 00:00:00.719][4] D -     13664 - QHEE Image Loaded, Delta - (380480 Bytes)
625<6>[    0.729727 / 01-01 00:00:00.719][4] B -    494283 - Image Load, Start
626<6>[    0.729773 / 01-01 00:00:00.719][4] D -         0 - STI Image Loaded, Delta - (0 Bytes)
627<6>[    0.729805 / 01-01 00:00:00.719][4] B -    494588 - Image Load, Start
628<6>[    0.729834 / 01-01 00:00:00.719][4] D -      3447 - Auth Metadata
629<6>[    0.729867 / 01-01 00:00:00.719][4] D -       976 - Segments hash check
630<6>[    0.729918 / 01-01 00:00:00.719][4] D -      6649 - ABL Image Loaded, Delta - (203344 Bytes)
631<6>[    0.729969 / 01-01 00:00:00.719][4] B -    501938 - [ADC][mvol=1871][hw_rev_table[12]=[1538]
632<6>[    0.730008 / 01-01 00:00:00.719][4] B -    503128 - boot_lge_pm_gpio_read(8):0
633<6>[    0.730080 / 01-01 00:00:00.729][4] B -    504439 - boot_lge_pm_gpio_read(10):0
634<6>[    0.730116 / 01-01 00:00:00.729][4] B -    504592 - boot_lge_SetSKUInfo(15)
635<6>[    0.730166 / 01-01 00:00:00.729][4] B -    505202 - [ADC][mvol=468][hw_sub_rev_table[2]=[375]
636<6>[    0.730220 / 01-01 00:00:00.729][4] B -    505812 - [ADC][mvol=1290][hw_ant_rev_table[3]=[1113]
637<6>[    0.730265 / 01-01 00:00:00.729][4] B -    556411 - [ADC][usb_id=1021][cable_type=12]
638<6>[    0.730313 / 01-01 00:00:00.729][4] B -    606401 - [BSP-USB] typec_status.dfp_curr_adv: 4
639<6>[    0.730363 / 01-01 00:00:00.729][4] B -    606401 - [BSP-USB] typec_status.ufp_conn_type : 7
640<6>[    0.730408 / 01-01 00:00:00.729][4] B -    606401 - [BSP-USB] typec_status.vbus_sts: 0
641<6>[    0.730461 / 01-01 00:00:00.729][4] B -    606401 - [BSP-USB] typec_status.debounce_done_sts: 0
642<6>[    0.730510 / 01-01 00:00:00.729][4] B -    606401 - [BSP-USB] disable USB Debugger for UART
643<6>[    0.730541 / 01-01 00:00:00.729][4] B -    606431 - longkey check, S
644<6>[    0.730606 / 01-01 00:00:00.729][4] B -    606492 - boot 0x1, wb1 0x0, off 0x80, rst 0x40, reason 0x4f6a7ff6
645<6>[    0.730638 / 01-01 00:00:00.729][4] D -        91 - longkey check, D
646<6>[    0.730670 / 01-01 00:00:00.729][4] B -    606645 - Image Load, Start
647<6>[    0.730697 / 01-01 00:00:00.729][4] D -      3538 - Auth Metadata
648<6>[    0.730731 / 01-01 00:00:00.729][4] D -      9119 - Segments hash check
649<6>[    0.730784 / 01-01 00:00:00.729][4] D -     25376 - APPSBL Image Loaded, Delta - (2097152 Bytes)
650<6>[    0.730811 / 01-01 00:00:00.729][4] B -    668712 - SBL1, End
651<6>[    0.730838 / 01-01 00:00:00.729][4] D -    578371 - SBL1, Delta
652<6>[    0.730893 / 01-01 00:00:00.729][4] S - Flash Throughput, 121000 KB/s  (5011248 Bytes,  41191 us)
653<6>[    0.730920 / 01-01 00:00:00.729][4] S - DDR Frequency, 1353 MHz
654<6>[    0.730925 / 01-01 00:00:00.729][4] 
655<6>[    0.730930 / 01-01 00:00:00.729][4] 
656<6>[    0.730956 / 01-01 00:00:00.729][4] UEFI Start     [  898] SEC
657<6>[    0.730974 / 01-01 00:00:00.729][4] ASLR        : On
658<6>[    0.730992 / 01-01 00:00:00.729][4] DEP         : On
659<6>[    0.731013 / 01-01 00:00:00.729][4] Timer Delta : +1 mS
660<6>[    0.731069 / 01-01 00:00:00.729][4] RAM Entry 0 : Base 0x0000000080000000  Size 0x00000000FE0A0000
661<6>[    0.731121 / 01-01 00:00:00.729][4] UEFI Ver    : 5.0.190508.BOOT.XF.2.0.c3-00002-SDM845LZB-1
662<6>[    0.731156 / 01-01 00:00:00.729][4] Build Info  : 64b May  8 2019 18:25:11
663<6>[    0.731174 / 01-01 00:00:00.729][4] Boot Device : UFS
664<6>[    0.731194 / 01-01 00:00:00.729][4] PROD Mode   : TRUE
665<6>[    0.731214 / 01-01 00:00:00.729][4] Retail      : TRUE
666<6>[    0.731241 / 01-01 00:00:00.729][4] PM0: 20, PM1: 21, PM2: 24, 
667<6>[    0.731296 / 01-01 00:00:00.729][4] UsbPwrCtrlLibConfig_Init Initializing DEFAULT configuration 
668<6>[    0.731324 / 01-01 00:00:00.729][4] UsbPwrCtrlLib_Init SUCCESS 
669<6>[    0.731396 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLibCommon_HWInit PlatformType = 8 has Static PlatHWConfig = 1 
670<6>[    0.731468 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLibCommon_HWInit PlatformType = 8: ChargerHW = 1, GaugeHW = 1 
671<6>[    0.731524 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFileLog_InitFileLog File Logging is Disabled 
672<6>[    0.731598 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x14031840 NoOfImaRetries = 0 
673<6>[    0.731695 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0x18, Offset = 0x1, mask= 0xFF ReadData = 0x14031840 
674<6>[    0.731754 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 12 Write Success 
675<6>[    0.731842 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0x14031840 WriteValue = 0x18 ReadData8 = 0x18
676<6>[    0.731912 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0xFFBF NoOfImaRetries = 0 
677<6>[    0.732003 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0xFF, Offset = 0x1, mask= 0xFF ReadData = 0xFFBF 
678<6>[    0.732063 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 19 Write Success 
679<6>[    0.732148 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0xFFBF WriteValue = 0xFF ReadData8 = 0xFF
680<6>[    0.732219 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0xFFBF NoOfImaRetries = 0 
681<6>[    0.732311 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0xBF, Offset = 0x0, mask= 0xFF ReadData = 0xFFBF 
682<6>[    0.732371 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 19 Write Success 
683<6>[    0.732456 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0xFFBF WriteValue = 0xBF ReadData8 = 0xBF
684<6>[    0.732529 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x1CFFFFFF NoOfImaRetries = 0 
685<6>[    0.732626 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0x1C, Offset = 0x3, mask= 0xFF ReadData = 0x1CFFFFFF 
686<6>[    0.732685 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 2 Write Success 
687<6>[    0.732774 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0x1CFFFFFF WriteValue = 0x1C ReadData8 = 0x1C
688<6>[    0.732846 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x600060 NoOfImaRetries = 0 
689<6>[    0.732941 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0x60, Offset = 0x0, mask= 0xFF ReadData = 0x600060 
690<6>[    0.733005 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 17 Write Success 
691<6>[    0.733099 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0x600060 WriteValue = 0x60 ReadData8 = 0x60
692<6>[    0.733177 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x330C194C NoOfImaRetries = 0 
693<6>[    0.733279 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0x33, Offset = 0x3, mask= 0xFF ReadData = 0x330C194C 
694<6>[    0.733342 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 15 Write Success 
695<6>[    0.733437 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0x330C194C WriteValue = 0x33 ReadData8 = 0x33
696<6>[    0.733489 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 46106 
697<6>[    0.733545 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 
698<6>[    0.733608 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicSchgSetChargerDefaultSetting Setting ICL = 500 mA 
699<6>[    0.733681 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicSchgInitialChargerCheckup APSD done status: 0, Port Type = 8 
700<6>[    0.733762 / 01-01 00:00:00.729][4] QcomChargerDxe:: ChargerPlatform_Init Successfully initialized ChargerLibCommon Success 
701<6>[    0.733822 / 01-01 00:00:00.729][4] 1, PmicDxe:: EFI_PmicSchgEnableChgWdog Charger Watchdog Disabled
702<6>[    0.733881 / 01-01 00:00:00.729][4] 1, PmicDxe:: EFI_PmicSchgEnableChgWdog Charger Watchdog Enabled
703<6>[    0.733931 / 01-01 00:00:00.729][4] QcomChargerDxe:: ChargerPlatform_Init Enabled WDOG.
704<6>[    0.733971 / 01-01 00:00:00.729][4] [Display] CurrentSlotInfo: Active Slot A 
705<6>[    0.734006 / 01-01 00:00:00.729][4] [Display] hw_rev=12, config idx=0
706<6>[    0.734036 / 01-01 00:00:00.729][4] [Display] Panel_CDP_PowerUp
707<6>[    0.734082 / 01-01 00:00:00.729][4] [Display] Panel_CDP_PeripheralPower Up for LCD
708<6>[    0.734125 / 01-01 00:00:00.729][4] [Display] MDPPLATFORM_CONFIG_GETPANELCONFIG
709<6>[    0.734153 / 01-01 00:00:00.729][4] [Display] Panel_CDP_Reset
710<6>[    0.734198 / 01-01 00:00:00.729][4] [Display] Display ID doesn't match : 12A1094
711<6>[    0.734241 / 01-01 00:00:00.729][4] [Display] Display ID doesn't match : 12A1094
712<6>[    0.734282 / 01-01 00:00:00.729][4] [Display] SW49410 RevID=0xF1, PanelIdx=3.
713<6>[    0.734333 / 01-01 00:00:00.729][4] [Display] Get panel cfg. : LGD_SW49410 Rev1 : 12A1094
714<6>[    0.734360 / 01-01 00:00:00.729][4] [Display] Panel_CDP_Reset
715<6>[    0.734401 / 01-01 00:00:00.729][4] DisplayDxe: Resolution 1440x3120 (1 intf)
716<6>[    0.734428 / 01-01 00:00:00.729][4] [Display] Panel_CDP_Reset
717<6>[    0.734452 / 01-01 00:00:00.729][4] Render Splash  [ 1570]
718<6>[    0.734485 / 01-01 00:00:00.729][4] -----------------------------
719<6>[    0.734513 / 01-01 00:00:00.729][4] Platform Init  [ 1685] BDS
720<6>[    0.734533 / 01-01 00:00:00.729][4] Platform   : MTP
721<6>[    0.734555 / 01-01 00:00:00.729][4] Chip Name  : SDM845
722<6>[    0.734576 / 01-01 00:00:00.729][4] Chip Ver   : 2.1
723<6>[    0.734600 / 01-01 00:00:00.729][4] Core 0 Freq: 1612 MHz
724<6>[    0.734616 / 01-01 00:00:00.729][4] Backlight_ON 
725<6>[    0.734658 / 01-01 00:00:00.729][4] [Display] MDPPLATFORM_CONFIG_SETBACKLIGHT
726<6>[    0.734717 / 01-01 00:00:00.729][4] [Display] SW49409 or SW49410:EnableCurrentSink EFI_PM_WLED_ALL
727<6>[    0.734766 / 01-01 00:00:00.729][4] [Display] Current Reset Reason Value : 0x20, NORMAL
728<6>[    0.734810 / 01-01 00:00:00.729][4] [Display] SW49409 or SW49410:EFI_PM_WLED_ALL
729<6>[    0.734842 / 01-01 00:00:00.729][4] -----------------------------
730<6>[    0.734924 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_IsChargingSupported PlatformType = 8: ChargerHW = 1, GaugeHW = 1 
731<6>[    0.734987 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_IsChargingSupported Support Charging = 1
732<6>[    0.735051 / 01-01 00:00:00.729][4] QcomChargerApp:: QcomChargerApp_Entry factory cable is not detected 
733<6>[    0.735155 / 01-01 00:00:00.729][4] 1, PmicDxe:: EFI_PmicSchgIsBatteryPresent Battery Missing: 0, Battery Missing Latched: 0 (0: present, 1: missing)
734<6>[    0.735208 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 46269 
735<6>[    0.735263 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 
736<6>[    0.735322 / 01-01 00:00:00.729][4] ChargerLib::ChargerLib_GetBatteryTempStatus BatteryTemp = 35 C 
737<6>[    0.735391 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_GetBatteryVoltageStatus Battery voltage = 4094 mV 
738<6>[    0.735457 / 01-01 00:00:00.729][4] ChargerLib::ChargerLib_GetErrors ERROR Charging source not detected 
739<6>[    0.735508 / 01-01 00:00:00.729][4] ChargerLib:: ChargerLib_GetErrors pChargingError = 11 
740<6>[    0.735584 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x9000000 NoOfImaRetries = 0 
741<6>[    0.735673 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadSingleOffset TempData = 0x9 Mask = 0xFF000000 ReadData = 0x9000000 
742<6>[    0.735785 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadSingleOffset Single Ima ReadAddress = 0x4F ReadData = 0x9000000 Offset Data = 0x9 Offset = 3 
743<6>[    0.735859 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ReadIntegrityBit Integrity byte address = 79 data = 0x9 
744<6>[    0.735944 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ReadIntegrityBit HLOS have loaded battery Profile in earlier boot. 
745<6>[    0.736029 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgCommon_ProfileLoadNeeded Batt Removed latched sts  = 0, bIntergrityBit = 1 
746<6>[    0.736103 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgCommon_ProfileLoadNeeded Status = Success, bIntergrityBit = 1 
747<6>[    0.736177 / 01-01 00:00:00.729][4] QcomChargerDxe:: ChargerPlatform_LoadProfile Battery Profile Loading is enabled 
748<6>[    0.736277 / 01-01 00:00:00.729][4] QcomChargerDxe:: ChargerPlatformFile_ReadBatteryProfile  FG Battery Profile Read Success Success Size = 7848 
749<6>[    0.736366 / 01-01 00:00:00.729][4] QcomChargerDxe:: ChargerPlatform_LoadProfile Battery Profile File Read Success DataSize = 7848 
750<6>[    0.736423 / 01-01 00:00:00.729][4] 1, PmicDxe: Valid Profile GUI Version = (PMI8998GUI-2.0.0.58)
751<6>[    0.736473 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #1 = 99BA4418 
752<6>[    0.736524 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #2 = 99BA4418 
753<6>[    0.736588 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #3 = 99BA4418, str = GUIVersion 
754<6>[    0.736655 / 01-01 00:00:00.729][4] 1, PmicDxe: PmicFgBattProfileTokenPtrArrCallBack Profile_Revision = 24 
755<6>[    0.736704 / 01-01 00:00:00.729][4] 1, PmicDxe: Battery Name = (LGE_BLT39_LGC_3000mAh) 
756<6>[    0.736753 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #4 = 99BA4418 
757<6>[    0.736785 / 01-01 00:00:00.729][4] 1, PmicDxe: 0x18 0x18 0x3 0xFD 
758<6>[    0.736844 / 01-01 00:00:00.729][4] 1, PmicDxe: Valid Profile GUI Version = (PMI8998GUI-2.0.0.58)
759<6>[    0.736894 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #1 = 99BA3018 
760<6>[    0.736944 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #2 = 99BA3018 
761<6>[    0.737008 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #3 = 99BA3018, str = GUIVersion 
762<6>[    0.737075 / 01-01 00:00:00.729][4] 1, PmicDxe: PmicFgBattProfileTokenPtrArrCallBack Profile_Revision = 24 
763<6>[    0.737127 / 01-01 00:00:00.729][4] 1, PmicDxe: Battery Name = (LGE_BLT39_Tocad_3000mAh) 
764<6>[    0.737176 / 01-01 00:00:00.729][4] 1, PmicDxe: check addrData allocated #4 = 99BA3018 
765<6>[    0.737209 / 01-01 00:00:00.729][4] 1, PmicDxe: 0x18 0x18 0x3 0x5 
766<6>[    0.737273 / 01-01 00:00:00.729][4] 1, PmicDxe: PmicBattProfileParseDataBuffer Battery Profile- Success 
767<6>[    0.737351 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x9000000 NoOfImaRetries = 0 
768<6>[    0.737441 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadSingleOffset TempData = 0x9 Mask = 0xFF000000 ReadData = 0x9000000 
769<6>[    0.737552 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadSingleOffset Single Ima ReadAddress = 0x4F ReadData = 0x9000000 Offset Data = 0x9 Offset = 3 
770<6>[    0.737626 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ReadIntegrityBit Integrity byte address = 79 data = 0x9 
771<6>[    0.737708 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ReadIntegrityBit HLOS have loaded battery Profile in earlier boot. 
772<6>[    0.737795 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgCommon_ProfileLoadNeeded Batt Removed latched sts  = 0, bIntergrityBit = 1 
773<6>[    0.737871 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgCommon_ProfileLoadNeeded Status = Success, bIntergrityBit = 1 
774<6>[    0.737923 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ReadBattID: BATT_ID_2 = 46269 
775<6>[    0.738017 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_PickProfile Count = (0x0) Batt_Id.Bid= (0xB4BD) Profile[0].BatteryId = (0x1D4C0)
776<6>[    0.738115 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_BatteryIdInToleranceLimit lower_limit = 110400, higher_limit = 129600 Tolerance = 8 
777<6>[    0.738209 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_PickProfile Count = (0x1) Batt_Id.Bid= (0xB4BD) Profile[1].BatteryId = (0xB3B0)
778<6>[    0.738307 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_BatteryIdInToleranceLimit lower_limit = 42320, higher_limit = 49680 Tolerance = 8 
779<6>[    0.738359 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadBurst Entry = Success 
780<6>[    0.738410 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadBurst Exit = Success 
781<6>[    0.738474 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_VerifyProfileMatch memcmp Success count = 6 
782<6>[    0.738555 / 01-01 00:00:00.729][4] 1, PmicDxe:: EFI_PmicFgExtendedInit Success Reading Profile Match = 1, Status = Success 
783<6>[    0.738650 / 01-01 00:00:00.729][4] 1, PmicDxe:: EFI_PmicFgExtendedInit  Battery profile loading skipped. Status = Success eProfileLoad = 1 
784<6>[    0.738713 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart VBattEstDiffThreshold 300 mv 
785<6>[    0.738758 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_Dump Entry = Success 
786<6>[    0.738796 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_Dump Disabled 
787<6>[    0.738854 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart Dump Completed = Success 
788<6>[    0.738915 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart VBattEstDiffThreshold 300 mv 
789<6>[    0.738957 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadCust Entry 
790<6>[    0.739001 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaReadCust Exit = Success 
791<6>[    0.739088 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart VoltageShadow = 0x4182 VEmpty = 0x330C194C VCurrPred = 0xC282C199 
792<6>[    0.739133 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_ConvertVolt Data = 0x4182 
793<6>[    0.739200 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_ConvertVolt Voltage = 4094 mv Shifted Data = 0x4182 
794<6>[    0.739254 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ConvertVEmptyIrq Data = 0x330C194C 
795<6>[    0.739322 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ConvertVEmptyIrq Data = 2796 mv shitfted Data = 0x33 
796<6>[    0.739369 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_ConvertVolt Data = 0xC282C199 
797<6>[    0.739436 / 01-01 00:00:00.729][4] 1, PmicDxe::PmicFgSram_ConvertVolt Voltage = 4099 mv Shifted Data = 0x4199 
798<6>[    0.739482 / 01-01 00:00:00.729][4] 1, PmicDxe: PmicFgSram_UsbinValid Usbin valid = 0 
799<6>[    0.739526 / 01-01 00:00:00.729][4] 1, PmicDxe: PmicFgSram_UsbinValid DCin valid = 0 
800<6>[    0.739629 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart VShadw = 4094 mv VEmpty = 2796 mv VPred = 4099 mv VBattEst = 5 mv IsInputValid = 0 
801<6>[    0.739706 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart Skipped VBattEstDiffThrld = 300 mV, VBattEst = 5 mv 
802<6>[    0.739776 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_CondRestart VCurrPred = 4099 mv, VoltageShadow = 4094 mv 
803<6>[    0.739849 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaRead Single Ima ReadData = 0x9000000 NoOfImaRetries = 0 
804<6>[    0.739942 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteValue = 0x0, Offset = 0x3, mask= 0x4 ReadData = 0x9000000 
805<6>[    0.740002 / 01-01 00:00:00.729][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingle IMA Addr = 79 Write Success 
806<6>[    0.740114 / 01-01 00:00:00.739][4] 1, PmicDxe:: PmicFgSram_ImaWriteSingleOffset WriteData = 0x9000000 WriteValue = 0x9 ReadData8 = 0x9
807<6>[    0.740214 / 01-01 00:00:00.739][4] 1, 1, PmicDxe:: EFI_PmicSchgIsBatteryPresent Battery Missing: 0, Battery Missing Latched: 0 (0: present, 1: missing)
808<6>[    0.740264 / 01-01 00:00:00.739][4] ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 46269 
809<6>[    0.740317 / 01-01 00:00:00.739][4] ChargerLib:: ChargerLib_GetBatteryType Battery type = 0 
810<6>[    0.740373 / 01-01 00:00:00.739][4] ChargerLib::ChargerLib_GetBatteryTempStatus BatteryTemp = 35 C 
811<6>[    0.740434 / 01-01 00:00:00.739][4] ChargerLib::ChargerLib_GetErrors ERROR Charging source not detected 
812<6>[    0.740483 / 01-01 00:00:00.739][4] ChargerLib:: ChargerLib_GetErrors pChargingError = 11 
813<6>[    0.740510 / 01-01 00:00:00.739][4] checkOperatorInUefi GLOBAL
814<6>[    0.740578 / 01-01 00:00:00.739][4] QcomChargerDxe:: ChargerPlatform_TakeAction Saving Exit VBat = 4094 Soc = 83 
815<6>[    0.740661 / 01-01 00:00:00.739][4] QcomChargerDxe:: buf_size_ret = 32 uefi_entry_mV = 4094 uefi_exit_mV = 4094 uefi_entry_soc = -1 
816<6>[    0.740726 / 01-01 00:00:00.739][4] QcomChargerDxe:: sbl_entry_mV = 4086 sbl_entry_soc = -1 ueft_exit_soc = 83 
817<6>[    0.740775 / 01-01 00:00:00.739][4] ChargerLib:: ChargerLib_LedOn LED TURNED OFF = Success 
818<6>[    0.740816 / 01-01 00:00:00.739][4] ChargerLib:: ChargerLib_Exit ChargerLibExit 
819<6>[    0.740848 / 01-01 00:00:00.739][4] 1, PmicDxe:: EFI_PmicFgBasicExit 
820<6>[    0.740882 / 01-01 00:00:00.739][4] 1, PmicDxe:: EFI_PmicFgExtendedExit 
821<6>[    0.740932 / 01-01 00:00:00.739][4] 1, PmicDxe:: EFI_PmicFgExtendedExit StateOfCharge:= 83 
822<6>[    0.740992 / 01-01 00:00:00.739][4] 1, PmicDxe:: EFI_PmicFgExtendedExit Batt Removed Latched status = 0 
823<6>[    0.741051 / 01-01 00:00:00.739][4] 1, PmicDxe:: PmicSchgSetChargerDefaultSetting Setting ICL = 500 mA 
824<6>[    0.741102 / 01-01 00:00:00.739][4] ChargerLib:: ChargerLib_LedOn LED TURNED OFF = Success 
825<6>[    0.741160 / 01-01 00:00:00.739][4] 1, PmicDxe:: EFI_PmicSchgEnableChgWdog Charger Watchdog Disabled
826<6>[    0.741181 / 01-01 00:00:00.739][4] UEFI Total : 836 ms
827<6>[    0.741211 / 01-01 00:00:00.739][4] POST Time      [ 1734] OS Loader
828<6>[    0.741255 / 01-01 00:00:00.739][4] 1737 -  Loader Build Info: May  8 2019 18:34:31
829<6>[    0.741301 / 01-01 00:00:00.739][4] 1740 -  PSTORE-BACKUP: PstoreBootReason : 6D630100
830<6>[    0.741350 / 01-01 00:00:00.739][4] 1740 -  PSTORE-BACKUP: PstoreBootReasonStr : KernelCrash
831<6>[    0.741392 / 01-01 00:00:00.739][4] 1740 -  PSTORE-BACKUP: BootReason : 6D630100
832<6>[    0.741457 / 01-01 00:00:00.739][4] LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 1
833<6>[    0.741526 / 01-01 00:00:00.739][4] LoadSecureAppsLAHelper: Load app from partition(akmu): Status = 0x0, AppId = 2
834<6>[    0.741595 / 01-01 00:00:00.739][4] LoadSecureApps: Load app from partition(imeiprotection): Status = 0x0, AppId = 3
835<6>[    0.741630 / 01-01 00:00:00.739][4] VB: RWDeviceState: Succeed using rpmb!
836<6>[    0.741656 / 01-01 00:00:00.739][4] 1980 -  UFS CardSize : 64G
837<6>[    0.741710 / 01-01 00:00:00.739][4] 1980 -  target_common_get_vari_mem: ddr_size:4, ufs_size:64G
838<6>[    0.741753 / 01-01 00:00:00.739][4] 1980 -  target_common_get_vari_mem: vari_mem:1
839<6>[    0.741817 / 01-01 00:00:00.739][4] 1980 -  bootmode_set_board_revision: update smem_vendor0_info vari_mem : 1
840<6>[    0.741881 / 01-01 00:00:00.739][4] 1980 -  bootmode_set_board_revision: board revision value is 12 from smem
841<6>[    0.741955 / 01-01 00:00:00.739][4] 1980 -  bootmode_set_board_revision: board revision value is 12 and ntcode  from smem
842<6>[    0.742007 / 01-01 00:00:00.739][4] 1980 -  ftm_check_validation: FTM magic string is matched. 
843<6>[    0.742032 / 01-01 00:00:00.739][4] 1981 -  set_dload_mode(0)
844<6>[    0.742075 / 01-01 00:00:00.739][4] 1981 -  [KSwitch] ftm kill switch item value=
845<6>[    0.742144 / 01-01 00:00:00.739][4] 1981 -  [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
846<6>[    0.742170 / 01-01 00:00:00.739][4] 1981 -  UsbinValid : FALSE
847<6>[    0.742224 / 01-01 00:00:00.739][4] 1981 -  bootmode_set_cable: NO_INIT_CABLE / INVALID from smem
848<6>[    0.742245 / 01-01 00:00:00.739][4] 1982 -  get_qem = 0
849<6>[    0.742290 / 01-01 00:00:00.739][4] 1982 -  bootmode_set_cable: qem(0), ftm_frst(5)
850<6>[    0.742344 / 01-01 00:00:00.739][4] 1982 -  bootmode_set_cable: NO_INIT_CABLE / INVALID from smem
851<6>[    0.742441 / 01-01 00:00:00.739][4] 1, PmicDxe:: EFI_PmicSchgIsBatteryPresent Battery Missing: 0, Battery Missing Latched: 0 (0: present, 1: missing)
852<6>[    0.742539 / 01-01 00:00:00.739][4] ChargerExProtocol:: EFI_ChargerExIsOffModeCharging PON = 0x1 IsColdBoot = 1 BatteryPresent = 1 ChargerPresent = 0 
853<6>[    0.742601 / 01-01 00:00:00.739][4] 1982 -  lge_one_binary_read_flex_gpio : [FLEX_GPIO]  flex_gpio_sum[0] 
854<6>[    0.742643 / 01-01 00:00:00.739][4] 1983 -  id = 103  get_ftm_one_binary_hwinfo() 
855<6>[    0.742704 / 01-01 00:00:00.739][4] 1983 -  lge_one_binary_read_hwinfo : HWINFO is not fixed. count = 3
856<6>[    0.742749 / 01-01 00:00:00.739][4] 1983 -  lge_one_binary_read_gpio : gpio sum  15 
857<6>[    0.742802 / 01-01 00:00:00.739][4] 1983 -  lge_one_binary_save_rmv_ftm_model_name NOT_DEFINED
858<6>[    0.742822 / 01-01 00:00:00.739][4] 1987 -  get_qem = 0
859<6>[    0.742838 / 01-01 00:00:00.739][4] 1987 -  impl:1
860<6>[    0.742862 / 01-01 00:00:00.739][4] 1987 -  boot_into_laf:0
861<6>[    0.742889 / 01-01 00:00:00.739][4] 1987 -  boot_into_lafmid:0
862<6>[    0.742915 / 01-01 00:00:00.739][4] 1987 -  boot_into_minios:0
863<6>[    0.742940 / 01-01 00:00:00.739][4] 1995 -  rpmb ftm_model:
864<6>[    0.742997 / 01-01 00:00:00.739][4] 1995 -  lge_one_binary_update_model_name : model_info->postfix:E
865<6>[    0.743052 / 01-01 00:00:00.739][4] 1995 -  lge_one_binary_update_model_name : model_info->hydra:M
866<6>[    0.743112 / 01-01 00:00:00.739][4] 1995 -  lge_one_binary_update_model_factory : model_info->postfix:E
867<6>[    0.743171 / 01-01 00:00:00.739][4] 1995 -  lge_one_binary_update_model_factory : model_info->hydra:M
868<6>[    0.743244 / 01-01 00:00:00.739][4] 1995 -  lge_one_binary_save_hwinfo : model.name is same. do not update hwinfo to ftm
869<6>[    0.743286 / 01-01 00:00:00.739][4] 1995 -  id = 20  get_ftm_one_binary_hwinfo() 
870<6>[    0.743336 / 01-01 00:00:00.739][4] 1995 -  operator is not existed in predefined str table
871<6>[    0.743358 / 01-01 00:00:00.739][4] 1995 -  op_str GLOBAL
872<6>[    0.743406 / 01-01 00:00:00.739][4] 1996 -  lge_one_binary_get_ftm_ntcode_operator GLOBAL
873<6>[    0.743429 / 01-01 00:00:00.739][4] 1996 -  ftm_op GLOBAL
874<6>[    0.743485 / 01-01 00:00:00.739][4] 1996 -  lge_one_binary_init : Model Name = LM-G710 -> LM-G710EM
875<6>[    0.743535 / 01-01 00:00:00.739][4] 1996 -  RenderBootImageScreen file name = lglogo_image
876<6>[    0.743592 / 01-01 00:00:00.739][4] 1998 -  RenderBootImageScreen file name = powered_android_image
877<6>[    0.743624 / 01-01 00:00:00.739][4] 2001 -  selectmode_get_mode start
878<6>[    0.743662 / 01-01 00:00:00.739][4] 2001 -  vol_down = 1, vol_up=0, power = 1
879<6>[    0.743711 / 01-01 00:00:00.739][4] 2001 -  selectmode_check_usb_cable: without usb cable
880<6>[    0.743743 / 01-01 00:00:00.739][4] 2001 -  extra_key_combo[0] start
881<6>[    0.743781 / 01-01 00:00:00.739][4] 2202 -  vol_down = 1, vol_up=0, power = 1
882<6>[    0.743820 / 01-01 00:00:00.739][4] 2402 -  vol_down = 1, vol_up=0, power = 1
883<6>[    0.743858 / 01-01 00:00:00.739][4] 2602 -  vol_down = 1, vol_up=0, power = 1
884<6>[    0.743896 / 01-01 00:00:00.739][4] 2802 -  vol_down = 1, vol_up=0, power = 1
885<6>[    0.743935 / 01-01 00:00:00.739][4] 3002 -  vol_down = 1, vol_up=0, power = 1
886<6>[    0.743974 / 01-01 00:00:00.739][4] 3202 -  vol_down = 1, vol_up=0, power = 1
887<6>[    0.744012 / 01-01 00:00:00.739][4] 3402 -  vol_down = 1, vol_up=0, power = 1
888<6>[    0.744051 / 01-01 00:00:00.739][4] 3602 -  vol_down = 1, vol_up=0, power = 1
889<6>[    0.744090 / 01-01 00:00:00.739][4] 3802 -  vol_down = 1, vol_up=0, power = 1
890<6>[    0.744129 / 01-01 00:00:00.739][4] 4002 -  vol_down = 1, vol_up=0, power = 0
891<6>[    0.744174 / 01-01 00:00:00.739][4] 4002 -  [key change] key_mid end ===============
892<6>[    0.744204 / 01-01 00:00:00.739][4] 4002 -  extra_key_combo[1] start
893<6>[    0.744243 / 01-01 00:00:00.739][4] 4202 -  vol_down = 1, vol_up=0, power = 0
894<6>[    0.744282 / 01-01 00:00:00.739][4] 4402 -  vol_down = 1, vol_up=0, power = 0
895<6>[    0.744320 / 01-01 00:00:00.739][4] 4603 -  vol_down = 1, vol_up=0, power = 1
896<6>[    0.744365 / 01-01 00:00:00.739][4] 4603 -  [key change] key_end1 end ==============
897<6>[    0.744414 / 01-01 00:00:00.739][4] 4603 -  [spend rest of time] extra_key_combo[2] start
898<6>[    0.744452 / 01-01 00:00:00.739][4] 4803 -  vol_down = 1, vol_up=0, power = 1
899<6>[    0.744490 / 01-01 00:00:00.739][4] 5003 -  vol_down = 1, vol_up=0, power = 1
900<6>[    0.744528 / 01-01 00:00:00.739][4] 5203 -  vol_down = 1, vol_up=0, power = 1
901<6>[    0.744566 / 01-01 00:00:00.739][4] 5403 -  vol_down = 1, vol_up=0, power = 1
902<6>[    0.744605 / 01-01 00:00:00.739][4] 5603 -  vol_down = 1, vol_up=0, power = 1
903<6>[    0.744643 / 01-01 00:00:00.739][4] 5803 -  vol_down = 1, vol_up=0, power = 1
904<6>[    0.744682 / 01-01 00:00:00.739][4] 6003 -  vol_down = 1, vol_up=0, power = 1
905<6>[    0.744743 / 01-01 00:00:00.739][4] 6003 -  final key combination: vol_up=0, vol_down=3, power=5, home=0
906<6>[    0.744793 / 01-01 00:00:00.739][4] 6003 -  target_selectmode_init: selectmode_get_mode()=3
907<6>[    0.744814 / 01-01 00:00:00.739][4] 6003 -  get_qem = 0
908<6>[    0.744840 / 01-01 00:00:00.739][4] 6003 -  SM_FACTORY_RESET 
909<6>[    0.744895 / 01-01 00:00:00.739][4] 6013 -  RenderBootImageScreen file name = factory_reset_image
910<6>[    0.744957 / 01-01 00:00:00.739][4] 6015 -  RenderBootImageScreen file name = factory_reset_1st_line_image
911<6>[    0.745017 / 01-01 00:00:00.739][4] 6020 -  RenderBootImageScreen file name = factory_reset_no_1st_image
912<6>[    0.745079 / 01-01 00:00:00.739][4] 7071 -  RenderBootImageScreen file name = factory_reset_yes_1st_image
913<6>[    0.745135 / 01-01 00:00:00.739][4] 7680 -  RenderBootImageScreen file name = factory_reset_image
914<6>[    0.745198 / 01-01 00:00:00.739][4] 7682 -  RenderBootImageScreen file name = factory_reset_2nd_line_image
915<6>[    0.745258 / 01-01 00:00:00.739][4] 7689 -  RenderBootImageScreen file name = factory_reset_no_2nd_image
916<6>[    0.745319 / 01-01 00:00:00.739][4] 8640 -  RenderBootImageScreen file name = factory_reset_yes_2nd_image
917<6>[    0.745366 / 01-01 00:00:00.739][4] 9241 -  PSTORE-BACKUP recover origin boot reason
918<6>[    0.745419 / 01-01 00:00:00.739][4] 9241 -  Reboot_reason:0x6D630100 (KernelCrash) Cold_boot:1
919<6>[    0.745450 / 01-01 00:00:00.739][4] 9244 -  CheckValidLunSlot: Done.
920<6>[    0.745512 / 01-01 00:00:00.739][4] 9244 -  Boot reason: 0x6D630100 not handled, defaulting to Normal Boot
921<6>[    0.745544 / 01-01 00:00:00.739][4] 9245 -  get_encrypt_on_minios = 0
922<6>[    0.745576 / 01-01 00:00:00.739][4] 9245 -  get_encrypt_on_minios = 0
923<6>[    0.745605 / 01-01 00:00:00.739][4] 9246 -  KSUT:: No Unlock Key
924<6>[    0.745641 / 01-01 00:00:00.739][4] 9246 -  LGFTM_LAF_MID_REBOOT_FLAG is 0
925<6>[    0.745666 / 01-01 00:00:00.739][4] 9246 -  webdload status:0
926<6>[    0.745695 / 01-01 00:00:00.739][4] 9247 -  dload_reboot status:0
927<6>[    0.745720 / 01-01 00:00:00.739][4] 9247 -  webdload status:0
928<6>[    0.745744 / 01-01 00:00:00.739][4] 9248 -  SDM845 ver : 2.1
929<6>[    0.745784 / 01-01 00:00:00.739][4] 9248 -  [KSwitch] check kill switch feature
930<6>[    0.745839 / 01-01 00:00:00.739][4] 9248 -  [KSwitch] check done (do nothing): valid=t, flasg=0x0
931<6>[    0.745861 / 01-01 00:00:00.739][4] 9248 -  SKU NAME = 15
932<6>[    0.745895 / 01-01 00:00:00.739][4] 9248 -  [LGE] Set Recovery Boot Flag
933<6>[    0.745916 / 01-01 00:00:00.739][4] 9248 -  get_qem = 0
934<6>[    0.745942 / 01-01 00:00:00.739][4] 9249 -  GPT is up to date!
935<6>[    0.745970 / 01-01 00:00:00.739][4] 9249 -  9249 -  get_qem = 0
936<6>[    0.746017 / 01-01 00:00:00.739][4] [LGE][OP Image] BootIntoFastboot : 0, get_qem() = 0
937<6>[    0.746037 / 01-01 00:00:00.739][4] 9249 -  get_qem = 0
938<6>[    0.746087 / 01-01 00:00:00.739][4] 9250 -  [LGE][OP Image] Old block count in ftm : 88064 
939<6>[    0.746142 / 01-01 00:00:00.739][4] 9250 -  [LGE][OP Image] Read image size from OP_a : 360710144 
940<6>[    0.746210 / 01-01 00:00:00.739][4] 9250 -  [LGE][OP Image] OP Image size is already written on ftm as same size.
941<6>[    0.746283 / 01-01 00:00:00.739][4] 9250 -  OP Image - get op_status : 3 (1 - No use, 2 - Need to update GPT, 3 - Done)
942<6>[    0.746332 / 01-01 00:00:00.739][4] 9250 -  [LGE][OP Image] get_ftm_frst 5, op_status : 3.
943<6>[    0.746431 / 01-01 00:00:00.739][4] 9251 -  [LGE][OP Image] OpaStartLBA : 0x2C7F06, OpbStartLBA : 0x2DD706, OpaEndLBA : 0x2DD705, OpbEndLBA : 0x2F2F05
944<6>[    0.746472 / 01-01 00:00:00.739][4] 9251 -  [LGE][OP Image] OpResizeBlkNo : 88064
945<6>[    0.746521 / 01-01 00:00:00.739][4] 9251 -  [LGE][OP Image] OP LBA is not changed(normal)
946<6>[    0.746559 / 01-01 00:00:00.739][4] 9251 -  [LGE][OP Image] End of OP Resize
947<6>[    0.746579 / 01-01 00:00:00.739][4] 9251 -  get_qem = 0
948<6>[    0.746606 / 01-01 00:00:00.739][4] 9251 -  Boot into Recovery
949<6>[    0.746634 / 01-01 00:00:00.739][4] 9251 -  9251 -  get_qem = 0
950<6>[    0.746662 / 01-01 00:00:00.739][4] 9251 -  get_charger_skip = 0
951<6>[    0.746684 / 01-01 00:00:00.739][4] 9251 -  PIF_DETECT:12
952<6>[    0.746707 / 01-01 00:00:00.739][4] 0 1835204864 1 0 0 0 0
953<6>[    0.746740 / 01-01 00:00:00.739][4] 9251 -  boot into chargerlogo : 0
954<6>[    0.746785 / 01-01 00:00:00.739][4] 9251 -  Active Slot _a is bootable, retry count 5
955<6>[    0.746814 / 01-01 00:00:00.739][4] 9252 -  Booting from slot (_a)
956<6>[    0.746930 / 01-01 00:00:00.739][4] 9255 -  avb_slot_verify.c9255 -  :9255 -  4329255 -  : DEBUG: 9255 -  Loading vbmeta struct from partition '9255 -  vbmeta_a9255 -  '.
957<6>[    0.747010 / 01-01 00:00:00.739][4] 9256 -  avb_vbmeta_image.c9256 -  :9256 -  2069256 -  : ERROR: 9256 -  Hash does not match!
958<6>[    0.747135 / 01-01 00:00:00.739][4] 9256 -  avb_slot_verify.c9256 -  :9256 -  5449256 -  : ERROR: 9256 -  vbmeta_a9256 -  : Error verifying vbmeta image: 9256 -  HASH_MISMATCH9256 -  
959<6>[    0.747262 / 01-01 00:00:00.739][4] 9256 -  avb_slot_verify.c9256 -  :9256 -  6539256 -  : ERROR: 9256 -  vbmeta_a9256 -  : Image rollback index is less than the stored rollback index.
960<6>[    0.747367 / 01-01 00:00:00.739][4] 9256 -  avb_slot_verify.c9256 -  :9256 -  7049256 -  : DEBUG: 9256 -  vbmeta_a9256 -  : VERIFICATION_DISABLED bit is set.
961<6>[    0.747463 / 01-01 00:00:00.739][4] 9256 -  avb_slot_verify.c9256 -  :9256 -  3179256 -  : DEBUG: 9256 -  boot_a9256 -  : Loading entire partition.
962<6>[    0.747559 / 01-01 00:00:00.739][4] 9386 -  avb_slot_verify.c9386 -  :9386 -  3179386 -  : DEBUG: 9386 -  dtbo_a9386 -  : Loading entire partition.
963<6>[    0.747631 / 01-01 00:00:00.739][4] 9403 -  State: Unlocked, AvbSlotVerify returned ERROR_ROLLBACK_INDEX, continue boot
964<6>[    0.747676 / 01-01 00:00:00.739][4] 9403 -  boot_into_laf == FALSE , GetImage(boot)
965<6>[    0.747728 / 01-01 00:00:00.739][4] 9412 -  VB2: Authenticate complete! boot state is: orange
966<6>[    0.747760 / 01-01 00:00:00.739][4] 9412 -  VB2: boot state: orange(1)
967<6>[    0.747781 / 01-01 00:00:00.739][4] 9414 -  get_qem = 0
968<6>[    0.747813 / 01-01 00:00:00.739][4] 9432 -  VerifiedUnlockProtocol OK
969<6>[    0.747869 / 01-01 00:00:00.739][4] 9459 -  RenderBootImageScreen file name = verifiedboot_orange_01
970<6>[    0.747928 / 01-01 00:00:00.739][4] 14476 -  bootmode_set_ddr_info: DDR Size info 4262068224 from smem
971<6>[    0.747987 / 01-01 00:00:00.739][4] 14476 -  bootmode_set_ddr_info: DDR MR info 0x101004FF from smem
972<6>[    0.748008 / 01-01 00:00:00.739][4] 14477 -  get_qem = 0
973<6>[    0.748029 / 01-01 00:00:00.739][4] 14478 -  get_qem = 0
974<6>[    0.748055 / 01-01 00:00:00.739][4] 14478 -  0 : ftm_get_item.
975<6>[    0.748104 / 01-01 00:00:00.739][4] 14478 -  suffix : LMG710EM.ATIMBL, suffix_length : 15
976<6>[    0.748131 / 01-01 00:00:00.739][4] 14478 -  device_color : BL
977<6>[    0.748173 / 01-01 00:00:00.739][4] 14479 -  id = 20  get_ftm_one_binary_hwinfo() 
978<6>[    0.748213 / 01-01 00:00:00.739][4] 14479 -  not found ntcode matching func (1)
979<6>[    0.748256 / 01-01 00:00:00.739][4] 14479 -  id = 20  get_ftm_one_binary_hwinfo() 
980<6>[    0.748304 / 01-01 00:00:00.739][4] 14479 -  operater is not existed in predefined table
981<6>[    0.748347 / 01-01 00:00:00.739][4] 14479 -  id = 20  get_ftm_one_binary_hwinfo() 
982<6>[    0.748395 / 01-01 00:00:00.739][4] 14479 -  operater is not existed in predefined table
983<6>[    0.748467 / 01-01 00:00:00.739][4] 14480 -  bootcmd_set_one_binary: bootcmd_set_one_binary ** bootcmd_set_one_binary 
984<6>[    0.748525 / 01-01 00:00:00.739][4] 14480 -  lge_one_binary_needed_model_factory LM-G710EM, LM-G710EM
985<6>[    0.748568 / 01-01 00:00:00.739][4] 14480 -  id = 20  get_ftm_one_binary_hwinfo() 
986<6>[    0.748618 / 01-01 00:00:00.739][4] 14480 -  operator is not existed in predefined str table
987<6>[    0.748660 / 01-01 00:00:00.739][4] 14481 -  id = 20  get_ftm_one_binary_hwinfo() 
988<6>[    0.748705 / 01-01 00:00:00.739][4] 14481 -  bootmode_set_ntcode: put ntcode to smem 
989<6>[    0.748748 / 01-01 00:00:00.739][4] 14481 -  lge_one_binary_get_svn_val CurSlot a 
990<6>[    0.748824 / 01-01 00:00:00.739][4] 14482 -  [LGE][read_blocks] PtName: OP_a, PtStartLBA : 0x2C7F06, OpaEndLBA : 0x2DD705
991<6>[    0.748869 / 01-01 00:00:00.739][4] 14482 -  lge_one_binary_get_svn_val : svn:     ...
992<6>[    0.748911 / 01-01 00:00:00.739][4] 14482 -  [LGE][read_blocks](0~ 4) 20 20 20 20
993<6>[    0.748960 / 01-01 00:00:00.739][4] 14482 -  bootmode_set_model_name:  get model  to smem 
994<6>[    0.749024 / 01-01 00:00:00.739][4] 14482 -  bootmode_set_model_name:  put lg_model_name LM-G710EM to smem 
995<6>[    0.749068 / 01-01 00:00:00.739][4] 14482 -  bootmode_set_svn_val:  get svn  to smem 
996<6>[    0.749121 / 01-01 00:00:00.739][4] 14482 -  bootmode_set_svn_val:  put svn_val      to smem 
997<6>[    0.749182 / 01-01 00:00:00.739][4] 14482 -  bootmode_set_flag_gpio: [FLEX_GPIO] put flag_gpio 0 to smem
998<6>[    0.749215 / 01-01 00:00:00.739][4] 14487 -  ro.boot.vendor.lge.id : 1
999<6>[    0.749259 / 01-01 00:00:00.739][4] 14489 -  No Ffbm cookie found, ignore: Not Found
1000<6>[    0.749313 / 01-01 00:00:00.739][4] 14489 -  BootLinux: boot_into_laf == FALSE , GetImage(boot)
1001<6>[    0.749351 / 01-01 00:00:00.739][4] 14489 -  Memory Base Address: 0x80000000
1002<6>[    0.749398 / 01-01 00:00:00.739][4] 14489 -  Decompressing kernel image start: 14489 ms
1003<6>[    0.749430 / 01-01 00:00:00.739][4] 14520 -  Exit key detection timer
1004<6>[    0.749491 / 01-01 00:00:00.739][4] 14538 -  ERROR: Failed to set keys detection Timer: Invalid Parameter
1005<6>[    0.749523 / 01-01 00:00:00.739][4] 14538 -  Exit key detection timer
1006<6>[    0.749570 / 01-01 00:00:00.739][4] 14863 -  Decompressing kernel image done: 14863 ms
1007<6>[    0.749607 / 01-01 00:00:00.739][4] 14863 -  Memory Base Address: 0x80000000
1008<6>[    0.749634 / 01-01 00:00:00.739][4] 15200 -  bootcmd: kswitch
1009<6>[    0.749677 / 01-01 00:00:00.739][4] 15200 -  bootcmd: androidboot.dlcomplete=0
1010<6>[    0.749740 / 01-01 00:00:00.739][4] 15200 -  bootcmd: androidboot.product.lge.bootreasoncode=0x6D630100
1011<6>[    0.749783 / 01-01 00:00:00.739][4] 15200 -  bootcmd: lge.bootreason=KernelCrash
1012<6>[    0.749840 / 01-01 00:00:00.739][4] 15200 -  bootcmd: androidboot.vendor.lge.hw.revision=rev_10
1013<6>[    0.749898 / 01-01 00:00:00.739][4] 15200 -  bootcmd: androidboot.vendor.lge.hw.subrev=subrev_2
1014<6>[    0.749953 / 01-01 00:00:00.739][4] 15200 -  bootcmd: androidboot.vendor.lge.hw.cable=NO_INIT
1015<6>[    0.750002 / 01-01 00:00:00.739][4] 15200 -  bootcmd: androidboot.vendor.lge.plmn=GLOBAL
1016<6>[    0.750081 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.product.lge.ddr_size=4262068224
1017<6>[    0.750137 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.vendor.lge.ddr_info=0x101004FF
1018<6>[    0.750175 / 01-01 00:00:00.749][4] 15200 -  bootcmd: lge.crash_handler=off
1019<6>[    0.750226 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.product.lge.hiddenreset=1
1020<6>[    0.750279 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.product.lge.device_color=BL
1021<6>[    0.750319 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.revision=12
1022<6>[    0.750376 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.vendor.lge.fingerprint_sensor=1
1023<6>[    0.750422 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.vendor.lge.gyro=1
1024<6>[    0.750474 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.vendor.lge.nfc.vendor=nxp
1025<6>[    0.750532 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.vendor.lge.sku_carrier=GLOBAL
1026<6>[    0.750578 / 01-01 00:00:00.749][4] 15200 -  bootcmd: androidboot.vendor.lge.dtv=0
1027<6>[    0.750627 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.fmradio=1
1028<6>[    0.750672 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.wmc=0
1029<6>[    0.750723 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.capsensor=1
1030<6>[    0.750774 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.hydra=Prime
1031<6>[    0.750827 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.ant_rev=GLOBAL
1032<6>[    0.750880 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.ant_match=TRUE
1033<6>[    0.750939 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.model.name=LM-G710EM
1034<6>[    0.750999 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.product.model=LM-G710
1035<6>[    0.751048 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.sim_num=1
1036<6>[    0.751085 / 01-01 00:00:00.749][4] 15201 -  bootcmd: lge.ntcode_op=GLOBAL
1037<6>[    0.751129 / 01-01 00:00:00.749][4] 15201 -  bootcmd: androidboot.vendor.lge.id=1
1038<6>[    0.751168 / 01-01 00:00:00.749][4] 15201 -  bootcmd: wled_strings=0,1,2,3
1039<6>[    0.751200 / 01-01 00:00:00.749][4] 15201 -  lge_bootcmd len: 1464
1040<6>[    0.751304 / 01-01 00:00:00.749][4] 15, PmicDxe:: EFI_PmicSchgIsBatteryPresent Battery Missing: 0, Battery Missing Latched: 0 (0: present, 1: missing)
1041<6>[    0.751408 / 01-01 00:00:00.749][4] ChargerExProtocol:: EFI_ChargerExIsOffModeCharging PON = 0x1 IsColdBoot = 1 BatteryPresent = 1 ChargerPresent = 1 
1042<6>[    0.751651 / 01-01 00:00:00.749][4] 15202 -  Cmdline: androidboot.selinux=permissive video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true firmware_class.path=/vendor/firmware_mnt/imag15202 -  
1043<6>[    0.751703 / 01-01 00:00:00.749][4] 15202 -  bootcmd_list_deinit : remove all bootcmd_arg
1044<6>[    0.751728 / 01-01 00:00:00.749][4] 15218 -  RAM Partitions
1045<6>[    0.751798 / 01-01 00:00:00.749][4] 15218 -  Add Base: 0x0000000080000000 Available Length: 0x00000000FE0A0000 
1046<6>[    0.751846 / 01-01 00:00:00.749][4] 15234 -  WARNING: Could not find mem-offline node.
1047<6>[    0.751898 / 01-01 00:00:00.749][4] 15250 -  ERROR: Could not get splash memory region node
1048<6>[    0.751942 / 01-01 00:00:00.749][4] 15269 -  kaslr-Seed is added to chosen node
1049<6>[    0.751969 / 01-01 00:00:00.749][4] 15313 -  Cmdline Len: 1840
1050<6>[    0.752018 / 01-01 00:00:00.749][4] 15318 -  akmu_cmd_set_dev_bootstate start: 15318 ms
1051<6>[    0.752050 / 01-01 00:00:00.749][4] 15318 -  Found the Akmu Protocol
1052<6>[    0.752097 / 01-01 00:00:00.749][4] 15320 -  akmu_cmd_set_dev_bootstate end: 15320 ms
1053<6>[    0.752124 / 01-01 00:00:00.749][4] 15320 -  PKM Disabled~!!!
1054<6>[    0.752151 / 01-01 00:00:00.749][4] 15321 -  Init already done
1055<6>[    0.752178 / 01-01 00:00:00.749][4] 15321 -  Init already done
1056<6>[    0.752191 / 01-01 00:00:00.749][4] 15336 -  
1057<6>[    0.752232 / 01-01 00:00:00.749][4] Shutting Down UEFI Boot Services: 15336 ms
1058<6>[    0.752268 / 01-01 00:00:00.749][4] BDS: LogFs sync skipped, Unsupported
1059<6>[    0.752290 / 01-01 00:00:00.749][4] App Log Flush : 0 ms
1060<6>[    0.752321 / 01-01 00:00:00.749][4] Exit BS        [15339] UEFI End
1061<6>[    0.752325 / 01-01 00:00:00.749][4] 
1062<6>[    0.752329 / 01-01 00:00:00.749][4] bootlog_probe: token           (null)
1063<6>[    0.752332 / 01-01 00:00:00.749][4] -------------------------------------------------
1064<4>[    0.752339 / 01-01 00:00:00.749][4] Trying to free nonexistent resource <00000000b00c0000-00000000b00dffff>
1065<3>[    0.752657 / 01-01 00:00:00.749][4] start SMPL counter
1066<6>[    0.752676 / 01-01 00:00:00.749][4] [QFUSE]lge_qfprom_probe : qfprom init
1067<6>[    0.752745 / 01-01 00:00:00.749][4] [LGE_PKM] lge_pkm_init: lge_pkm_init 
1068<6>[    0.752856 / 01-01 00:00:00.749][4] [LGE_PKM] lge_pkm_probe: lge_pkm_probe start
1069<6>[    0.752878 / 01-01 00:00:00.749][4] [LGE_PKM] lge_pkm_probe: lge_pkm_probe done
1070<3>[    0.753018 / 01-01 00:00:00.749][4] register_client_adhoc:find path.src 1 dest 512
1071<3>[    0.753136 / 01-01 00:00:00.749][4] register_client_adhoc:Client handle 13 lge_mme_bus
1072<3>[    0.753254 / 01-01 00:00:00.749][4] [MME] lge_mme_probe: probe enter
1073<3>[    0.753263 / 01-01 00:00:00.749][4] [MME] mme_gpio_init: gpio_sleep_n=27
1074<3>[    0.753291 / 01-01 00:00:00.749][4] [MME] gpio_request_one: nSleep GPIO_3=27
1075<6>[    0.753309 / 01-01 00:00:00.749][4] [MME] lge_mme_probe: probe done
1076<3>[    0.753328 / 01-01 00:00:00.749][4] lge_regulator_mode_change_init
1077<3>[    0.753430 / 01-01 00:00:00.749][4] lge_regulator_mode_change_probe start
1078<3>[    0.753463 / 01-01 00:00:00.749][4] lge_regulator_mode_change_parse_dt bob_min_voltage = 3400000
1079<3>[    0.753468 / 01-01 00:00:00.749][4] lge_regulator_mode_change_parse_dt bob_max_voltage = 3400000
1080<3>[    0.753473 / 01-01 00:00:00.749][4] lge_regulator_mode_change_parse_dt bob_auto_threshold = 100000
1081<3>[    0.753477 / 01-01 00:00:00.749][4] lge_regulator_mode_change_parse_dt bob_pwm_threshold = 200000
1082<3>[    0.753481 / 01-01 00:00:00.749][4] lge_regulator_mode_change_probe done
1083<6>[    0.754259 / 01-01 00:00:00.749][4] msm_geni_serial 898000.qcom,qup_uart: Wakeup byte 0xfd
1084<6>[    0.754297 / 01-01 00:00:00.749][4] msm_geni_serial 898000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
1085<6>[    0.754312 / 01-01 00:00:00.749][4] msm_geni_serial 898000.qcom,qup_uart: Err in Rx IPC Log
1086<6>[    0.754318 / 01-01 00:00:00.749][4] msm_geni_serial 898000.qcom,qup_uart: Err in Tx IPC Log
1087<6>[    0.754324 / 01-01 00:00:00.749][4] msm_geni_serial 898000.qcom,qup_uart: Err in Pwr IPC Log
1088<6>[    0.754330 / 01-01 00:00:00.749][4] msm_geni_serial 898000.qcom,qup_uart: Err in Misc IPC Log
1089<6>[    0.754339 / 01-01 00:00:00.749][4] 898000.qcom,qup_uart: ttyHS0 at MMIO 0x898000 (irq = 8, base_baud = 0) is a MSM
1090<6>[    0.754945 / 01-01 00:00:00.749][4] msm_geni_serial a84000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console1
1091<6>[    0.754960 / 01-01 00:00:00.749][4] a84000.qcom,qup_uart: ttyMSM0 at MMIO 0xa84000 (irq = 12, base_baud = 0) is a MSM
1092<6>[    0.759049 / 01-01 00:00:00.749][4] console [ttyMSM0] enabled
1093<6>[    0.759362 / 01-01 00:00:00.749][4] msm_geni_serial_init: Driver initialized
1094<3>[    0.759551 / 01-01 00:00:00.749][4] register_client_adhoc:find path.src 1 dest 618
1095<3>[    0.759662 / 01-01 00:00:00.759][0] register_client_adhoc:Client handle 14 msm-rng-noc
1096<5>[    0.760408 / 01-01 00:00:00.759][0] random: crng init done
1097<6>[    0.765564 / 01-01 00:00:00.759][4] lge_bypass_init
1098<6>[    0.765610 / 01-01 00:00:00.759][4] lge_bypass_init: success
1099<6>[    0.767788 / 01-01 00:00:00.759][4] [drm] Initialized
1100<3>[    0.767933 / 01-01 00:00:00.759][4] register_client_adhoc:find path.src 20003 dest 20515
1101<3>[    0.768018 / 01-01 00:00:00.759][4] register_client_adhoc:find path.src 20004 dest 20515
1102<3>[    0.768063 / 01-01 00:00:00.759][4] register_client_adhoc:Client handle 15 disp_rsc_mnoc
1103<3>[    0.768081 / 01-01 00:00:00.759][4] register_client_adhoc:find path.src 20001 dest 20513
1104<3>[    0.768132 / 01-01 00:00:00.759][4] register_client_adhoc:Client handle 16 disp_rsc_llcc
1105<3>[    0.768152 / 01-01 00:00:00.759][4] register_client_adhoc:find path.src 20000 dest 20512
1106<3>[    0.768194 / 01-01 00:00:00.759][4] register_client_adhoc:Client handle 17 disp_rsc_ebi
1107<6>[    0.768505 / 01-01 00:00:00.759][4] [sde_rsc_hw:rsc_hw_init:690]: sde rsc init successfully done
1108<6>[    0.768528 / 01-01 00:00:00.759][4] [sde_rsc:sde_rsc_probe:1424]: sde rsc index:0 probed successfully
1109<6>[    0.768959 / 01-01 00:00:00.759][4] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
1110<6>[    0.769030 / 01-01 00:00:00.759][4] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
1111<3>[    0.769569 / 01-01 00:00:00.759][4] AXI: get_pdata(): Error: Client name not found
1112<3>[    0.769577 / 01-01 00:00:00.759][4] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1113<6>[    0.769586 / 01-01 00:00:00.759][4] [Display][dsi-ctrl:dsi_ctrl_dev_probe:1760] Probe successful for dsi-ctrl-0
1114<6>[    0.770311 / 01-01 00:00:00.769][4] [Display][msm-dsi-display:dsi_display_parse_te_gpio:600] disp_te_gpio = 10
1115<3>[    0.770394 / 01-01 00:00:00.769][4] [Display][msm-dsi-panel:dsi_panel_parse_reset_sequence:1810] RESET SEQ LENGTH = 24
1116<6>[    0.770415 / 01-01 00:00:00.769][4] [Display][msm-dsi-panel:dsi_panel_parse_misc_features:1859] dsi_panel_parse_misc_features: ulps feature enabled
1117<6>[    0.770422 / 01-01 00:00:00.769][4] [Display][msm-dsi-panel:dsi_panel_parse_misc_features:1865] dsi_panel_parse_misc_features: ulps during suspend feature enabled
1118<6>[    0.770445 / 01-01 00:00:00.769][4] [Display][msm-dsi-panel:dsi_panel_parse_esd_config:2958] ESD enabled with mode: te_check
1119<6>[    0.770466 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap blmap_size = 256
1120<6>[    0.770481 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap has been successfully parsed. 
1121<6>[    0.770488 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-psm blmap_size = 256
1122<6>[    0.770497 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-psm has been successfully parsed. 
1123<6>[    0.770503 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-gal blmap_size = 256
1124<6>[    0.770512 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-gal has been successfully parsed. 
1125<3>[    0.770520 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:74] can't find lge,blmap-bri
1126<6>[    0.770527 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-hqc blmap_size = 256
1127<6>[    0.770534 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-hqc has been successfully parsed. 
1128<6>[    0.770540 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-max blmap_size = 256
1129<6>[    0.770550 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-max has been successfully parsed. 
1130<6>[    0.770556 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-hl blmap_size = 11
1131<6>[    0.770562 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-hl has been successfully parsed. 
1132<6>[    0.770568 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-psm-hl blmap_size = 256
1133<6>[    0.770583 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-psm-hl has been successfully parsed. 
1134<6>[    0.770589 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-gal-hl blmap_size = 11
1135<6>[    0.770595 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-gal-hl has been successfully parsed. 
1136<3>[    0.770601 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:74] can't find lge,blmap-bri-hl
1137<6>[    0.770608 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-hqc-hl blmap_size = 11
1138<6>[    0.770615 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-hqc-hl has been successfully parsed. 
1139<6>[    0.770621 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-max-hl blmap_size = 11
1140<6>[    0.770628 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-max-hl has been successfully parsed. 
1141<6>[    0.770636 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-hbm-hd blmap_size = 256
1142<6>[    0.770644 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-hbm-hd has been successfully parsed. 
1143<3>[    0.770651 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:74] can't find lge,blmap-ve
1144<6>[    0.770657 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:78] lge,blmap-ex blmap_size = 160
1145<6>[    0.770663 / 01-01 00:00:00.769][4] [Display][lge-backlight:lge_dsi_panel_parse_blmap_sub:90] lge,blmap-ex has been successfully parsed. 
1146<6>[    0.770671 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1669] lge_man_name=LGD
1147<6>[    0.770678 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1679] lge_ddic_name=sw49410_rev1
1148<6>[    0.770684 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1687] use_labibb=1
1149<6>[    0.770690 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1690] reset_after_ddvd=1
1150<6>[    0.770696 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1693] dcs_brightness_be=0
1151<6>[    0.770702 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1696] is_incell=1
1152<6>[    0.770708 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1699] use bist pattern=0
1153<6>[    0.770715 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1711] update_pps in lp state=0
1154<6>[    0.770720 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1714] use drs manager=1
1155<6>[    0.770729 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1720] use register backup=0
1156<6>[    0.770735 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1723] use bc dim =0
1157<6>[    0.770741 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1726] use mplus=1
1158<6>[    0.770747 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1729] use hl_mode=1
1159<6>[    0.770752 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1733] use u2_fsc=1
1160<6>[    0.770760 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1741] fsc_u3 20000
1161<6>[    0.770767 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1749] fsc_u2 2500
1162<6>[    0.770772 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1755] use color manager=1
1163<3>[    0.770780 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1760] fail to parse lge.hbm_mode Set to Default 3
1164<6>[    0.770787 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1767] use ambient=1
1165<6>[    0.770793 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1770] use cmd_wait_pa_changed=0
1166<6>[    0.770799 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1773] use line detect=0
1167<6>[    0.770805 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1776] use bc dimming work=0
1168<3>[    0.770812 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1784] aod_interface = 324
1169<3>[    0.770822 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1790] fail to parse lge,color-manager-default-status
1170<3>[    0.770831 / 01-01 00:00:00.769][4] [Display][lge-cm:mdss_dsi_parse_color_manager_modes:840] num =0
1171<3>[    0.770837 / 01-01 00:00:00.769][4] [Display][lge-cm:mdss_dsi_parse_color_manager_modes:843] error reading lge,mdss-dsi-color-manager-mode-table, length found = 0
1172<6>[    0.770845 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1805] use panel err detect = 0
1173<6>[    0.770850 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1812] use panel reset low before lp11 = 1
1174<6>[    0.770857 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1815] use extra recovery command = 1
1175<6>[    0.770863 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1818] use dcs_brightness_short=0
1176<6>[    0.770870 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1821] use ddic_register_lock=0
1177<6>[    0.770876 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1824] use irc_ctrl=0
1178<6>[    0.770882 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_parse_dt:1827] use ace_ctrl=0
1179<3>[    0.770889 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:lge_dsi_panel_get:1856] failed to parse dt, rc=-22
1180<3>[    0.770913 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 4 is failed or not defined
1181<3>[    0.770920 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 5 is failed or not defined
1182<3>[    0.770926 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 6 is failed or not defined
1183<3>[    0.770933 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 7 is failed or not defined
1184<3>[    0.770940 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 8 is failed or not defined
1185<3>[    0.770947 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 9 is failed or not defined
1186<3>[    0.770954 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 10 is failed or not defined
1187<3>[    0.770968 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 12 is failed or not defined
1188<3>[    0.770975 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 13 is failed or not defined
1189<3>[    0.770982 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 14 is failed or not defined
1190<3>[    0.770989 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 15 is failed or not defined
1191<3>[    0.770996 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 16 is failed or not defined
1192<3>[    0.771003 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 17 is failed or not defined
1193<3>[    0.771010 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 18 is failed or not defined
1194<3>[    0.771023 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 21 is failed or not defined
1195<3>[    0.771031 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 22 is failed or not defined
1196<3>[    0.771043 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 24 is failed or not defined
1197<3>[    0.771049 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 25 is failed or not defined
1198<3>[    0.771059 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 27 is failed or not defined
1199<3>[    0.771065 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 28 is failed or not defined
1200<3>[    0.771072 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 29 is failed or not defined
1201<3>[    0.771079 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 30 is failed or not defined
1202<3>[    0.771085 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 31 is failed or not defined
1203<3>[    0.771092 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 32 is failed or not defined
1204<3>[    0.771098 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 33 is failed or not defined
1205<3>[    0.771105 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 34 is failed or not defined
1206<3>[    0.771128 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 39 is failed or not defined
1207<3>[    0.771135 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 40 is failed or not defined
1208<3>[    0.771142 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 41 is failed or not defined
1209<3>[    0.771149 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 42 is failed or not defined
1210<3>[    0.771155 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 43 is failed or not defined
1211<3>[    0.771162 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 44 is failed or not defined
1212<3>[    0.771168 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 45 is failed or not defined
1213<3>[    0.771175 / 01-01 00:00:00.769][4] [Display][ddic-ops:lge_ddic_dsi_panel_parse_cmd_sets:559] parse set 46 is failed or not defined
1214<3>[    0.771189 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw43402, lge_ddic = sw49410_rev1
1215<3>[    0.771194 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw43408, lge_ddic = sw49410_rev1
1216<3>[    0.771200 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw43408a, lge_ddic = sw49410_rev1
1217<3>[    0.771205 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49409, lge_ddic = sw49410_rev1
1218<3>[    0.771211 / 01-01 00:00:00.769][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49410, lge_ddic = sw49410_rev1
1219<3>[    0.771221 / 01-01 00:00:00.769][4] [Display][lge-drs:lge_drs_mngr_get_and_validate:27] drs mngr is not initialized
1220<6>[    0.786152 / 01-01 00:00:00.779][4] [Display][lge-drs:lge_drs_mngr_init:345] drs mngr initialized
1221<3>[    0.788474 / 01-01 00:00:00.779][4] [Display][msm-dsi-display:dsi_display_get_boot_display:2397] index = 0
1222<3>[    0.788487 / 01-01 00:00:00.779][4] [Display][msm-dsi-display:dsi_display_get_boot_display:2397] index = 1
1223<6>[    0.791485 / 01-01 00:00:00.789][4] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 15
1224<6>[    0.791741 / 01-01 00:00:00.789][4] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 16
1225<3>[    0.793565 / 01-01 00:00:00.789][4] register_client_adhoc:find path.src 26 dest 512
1226<3>[    0.793741 / 01-01 00:00:00.789][4] register_client_adhoc:Client handle 18 grp3d
1227<3>[    0.793757 / 01-01 00:00:00.789][4] register_client_adhoc:find path.src 26 dest 10036
1228<3>[    0.793839 / 01-01 00:00:00.789][4] register_client_adhoc:Client handle 19 cnoc
1229<3>[    0.793852 / 01-01 00:00:00.789][4] query_client_usecase_all: query_start
1230<3>[    0.793893 / 01-01 00:00:00.789][4] query_client_usecase_all: query_start
1231<6>[    0.795233 / 01-01 00:00:00.789][4] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 17
1232<6>[    0.795550 / 01-01 00:00:00.789][4] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 18
1233<6>[    0.797755 / 01-01 00:00:00.789][4] kgsl_pool_config: Pool order:1 not supprted.!!
1234<6>[    0.797768 / 01-01 00:00:00.789][4] kgsl_pool_config: Pool order:4 not supprted.!!
1235<6>[    0.797775 / 01-01 00:00:00.789][4] kgsl_pool_config: Pool order:8 not supprted.!!
1236<6>[    0.806364 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1237<6>[    0.806422 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1238<6>[    0.806446 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1239<6>[    0.806477 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1240<6>[    0.806505 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1241<6>[    0.806534 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1242<6>[    0.806565 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1243<6>[    0.806591 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1244<6>[    0.806618 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1245<6>[    0.806646 / 01-01 00:00:00.799][4] thermal_sys: thermal-devfreq-0 set to state 0 min state 18446744073709551615
1246<6>[    0.812774 / 01-01 00:00:00.809][4] brd: module loaded
1247<6>[    0.815524 / 01-01 00:00:00.809][4] loop: module loaded
1248<6>[    0.815810 / 01-01 00:00:00.809][4] zram: Added device: zram0
1249<6>[    0.816056 / 01-01 00:00:00.809][4] zram: Added device: zram1
1250<4>[    0.817493 / 01-01 00:00:00.809][4] CHRDEV "qseecom" major number 233 goes below the dynamic allocation range
1251<6>[    0.817705 / 01-01 00:00:00.809][4] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
1252<4>[    0.817745 / 01-01 00:00:00.809][4] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1253<6>[    0.817760 / 01-01 00:00:00.809][4] QSEECOM: qseecom_probe: no-clock-support=0x1
1254<4>[    0.817771 / 01-01 00:00:00.809][4] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1255<3>[    0.817843 / 01-01 00:00:00.809][4] register_client_adhoc:find path.src 125 dest 512
1256<3>[    0.818125 / 01-01 00:00:00.809][4] register_client_adhoc:Client handle 20 qseecom-noc
1257<4>[    0.818242 / 01-01 00:00:00.809][4] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
1258<6>[    0.819071 / 01-01 00:00:00.809][4] Loading PN547 driver
1259<6>[    0.819108 / 01-01 00:00:00.809][0] pn547: Start async init
1260<6>[    0.819153 / 01-01 00:00:00.809][0] pn547: Loading PN547 driver Success! 
1261<3>[    0.819306 / 01-01 00:00:00.809][4] register_client_adhoc:find path.src 125 dest 512
1262<3>[    0.819449 / 01-01 00:00:00.809][4] register_client_adhoc:Client handle 21 qcedev-noc
1263<6>[    0.821518 / 01-01 00:00:00.819][4] qce 1de0000.qcedev: QTI Crypto 5.4.1 device found @0x1de0000
1264<6>[    0.821531 / 01-01 00:00:00.819][4] qce 1de0000.qcedev: CE device = 0x0 IO base, CE = ffffff800e120000 Consumer (IN) PIPE 6,
1265<6>[    0.821531 / 01-01 00:00:00.819][4] Producer (OUT) PIPE 7 IO base BAM = 0000000000000000
1266<6>[    0.821531 / 01-01 00:00:00.819][4] BAM IRQ 110 Engines Availability = 0x2011073
1267<3>[    0.821568 / 01-01 00:00:00.819][4] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000001dc4000
1268<3>[    0.821579 / 01-01 00:00:00.819][4] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000001dc4000
1269<3>[    0.821585 / 01-01 00:00:00.819][4] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000001dc4000
1270<3>[    0.821593 / 01-01 00:00:00.819][4] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000001dc4000
1271<3>[    0.821601 / 01-01 00:00:00.819][4] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000001dc4000
1272<6>[    0.821609 / 01-01 00:00:00.819][4] sps:BAM 0x0000000001dc4000 is registered.
1273<6>[    0.821837 / 01-01 00:00:00.819][4] sps:BAM 0x0000000001dc4000 (va:0xffffff800e740000) enabled: ver:0x27, number of pipes:16
1274<6>[    0.822228 / 01-01 00:00:00.819][4] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001dc4000 irq 110
1275<6>[    0.827458 / 01-01 00:00:00.819][4] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 19
1276<6>[    0.828225 / 01-01 00:00:00.819][4] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
1277<6>[    0.828235 / 01-01 00:00:00.819][4] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
1278<6>[    0.828244 / 01-01 00:00:00.819][4] qcedev_setup_context_bank size:0x40000000, dev:ffffffd370460810, mapping:ffffffd37045c900
1279<6>[    0.828321 / 01-01 00:00:00.819][4] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 20
1280<6>[    0.830518 / 01-01 00:00:00.829][4] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
1281<6>[    0.830531 / 01-01 00:00:00.829][4] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0x60200000
1282<6>[    0.830539 / 01-01 00:00:00.829][4] qcedev_setup_context_bank size:0x40000000, dev:ffffffd370460c10, mapping:ffffffd370468200
1283<3>[    0.831395 / 01-01 00:00:00.829][4] register_client_adhoc:find path.src 125 dest 512
1284<3>[    0.831594 / 01-01 00:00:00.829][4] register_client_adhoc:Client handle 22 qcrypto-noc
1285<6>[    0.833251 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.1 device found @0x1de0000
1286<6>[    0.833264 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: CE device = 0x0 IO base, CE = ffffff800e780000 Consumer (IN) PIPE 4,
1287<6>[    0.833264 / 01-01 00:00:00.829][4] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
1288<6>[    0.833264 / 01-01 00:00:00.829][4] BAM IRQ 110 Engines Availability = 0x2011073
1289<6>[    0.833757 / 01-01 00:00:00.829][4] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001dc4000 irq 110
1290<6>[    0.838601 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
1291<6>[    0.838757 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
1292<6>[    0.838902 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
1293<6>[    0.839026 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
1294<6>[    0.839156 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
1295<6>[    0.839361 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
1296<6>[    0.839480 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
1297<6>[    0.839598 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
1298<6>[    0.839714 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-sha1
1299<6>[    0.839833 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-sha256
1300<6>[    0.839956 / 01-01 00:00:00.829][4] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1301<6>[    0.840164 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1302<6>[    0.840283 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1303<6>[    0.840403 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1304<6>[    0.840515 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1305<6>[    0.840644 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1306<6>[    0.840765 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
1307<6>[    0.840880 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
1308<6>[    0.840992 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
1309<6>[    0.841106 / 01-01 00:00:00.839][4] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
1310<4>[    0.841651 / 01-01 00:00:00.839][4] CHRDEV "iceufs" major number 232 goes below the dynamic allocation range
1311<6>[    0.842566 / 01-01 00:00:00.839][4] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
1312<6>[    0.845149 / 01-01 00:00:00.839][4] qcom_ice_get_pdevice: found ice device ffffffd370afa200
1313<6>[    0.845157 / 01-01 00:00:00.839][4] qcom_ice_get_pdevice: matching platform device ffffffd374e33c00
1314<3>[    0.845350 / 01-01 00:00:00.839][4] register_client_adhoc:find path.src 123 dest 512
1315<3>[    0.845526 / 01-01 00:00:00.839][4] register_client_adhoc:find path.src 1 dest 757
1316<3>[    0.845656 / 01-01 00:00:00.839][4] register_client_adhoc:Client handle 23 ufshc_mem
1317<6>[    0.846484 / 01-01 00:00:00.839][4] scsi host0: ufshcd
1318<6>[    0.851404 / 01-01 00:00:00.849][4] qcom_ice 1d90000.ufsice: QC ICE 3.1.75 device found @0xffffff8008ed8000
1319<6>[    0.870764 / 01-01 00:00:00.869][4] SCSI Media Changer driver v0.25 
1320<6>[    0.872710 / 01-01 00:00:00.869][4] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
1321<6>[    0.873873 / 01-01 00:00:00.869][4] libphy: Fixed MDIO Bus: probed
1322<6>[    0.873906 / 01-01 00:00:00.869][4] tun: Universal TUN/TAP device driver, 1.6
1323<6>[    0.873914 / 01-01 00:00:00.869][4] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1324<6>[    0.873964 / 01-01 00:00:00.869][4] sky2: driver version 1.30
1325<6>[    0.874187 / 01-01 00:00:00.869][4] PPP generic driver version 2.4.2
1326<6>[    0.874238 / 01-01 00:00:00.869][4] PPP BSD Compression module registered
1327<6>[    0.874247 / 01-01 00:00:00.869][4] PPP Deflate Compression module registered
1328<6>[    0.874282 / 01-01 00:00:00.869][4] PPP MPPE Compression module registered
1329<6>[    0.874294 / 01-01 00:00:00.869][4] NET: Registered protocol family 24
1330<6>[    0.874404 / 01-01 00:00:00.869][4] CLD80211: Initializing
1331<6>[    0.874619 / 01-01 00:00:00.869][4] usbcore: registered new interface driver catc
1332<6>[    0.874628 / 01-01 00:00:00.869][4] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
1333<6>[    0.874651 / 01-01 00:00:00.869][4] usbcore: registered new interface driver pegasus
1334<6>[    0.874669 / 01-01 00:00:00.869][4] usbcore: registered new interface driver rtl8150
1335<6>[    0.874691 / 01-01 00:00:00.869][4] usbcore: registered new interface driver r8152
1336<6>[    0.874700 / 01-01 00:00:00.869][4] hso: /data001/jenkins/SBS9001/recovery/judy_lao_com_kr_pos_316359/android/kernel/msm-4.9/drivers/net/usb/hso.c: Option Wireless
1337<4>[    0.874723 / 01-01 00:00:00.869][4] CHRDEV "ttyHS" major number 231 goes below the dynamic allocation range
1338<6>[    0.874746 / 01-01 00:00:00.869][4] usbcore: registered new interface driver hso
1339<6>[    0.874761 / 01-01 00:00:00.869][4] usbcore: registered new interface driver lan78xx
1340<6>[    0.874788 / 01-01 00:00:00.869][4] usbcore: registered new interface driver asix
1341<6>[    0.874804 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ax88179_178a
1342<6>[    0.874819 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cdc_ether
1343<6>[    0.874832 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cdc_eem
1344<6>[    0.874846 / 01-01 00:00:00.869][4] usbcore: registered new interface driver dm9601
1345<6>[    0.874866 / 01-01 00:00:00.869][4] usbcore: registered new interface driver sr9700
1346<6>[    0.874882 / 01-01 00:00:00.869][4] usbcore: registered new interface driver CoreChips
1347<6>[    0.874899 / 01-01 00:00:00.869][4] usbcore: registered new interface driver smsc75xx
1348<6>[    0.874916 / 01-01 00:00:00.869][4] usbcore: registered new interface driver smsc95xx
1349<6>[    0.874934 / 01-01 00:00:00.869][4] usbcore: registered new interface driver gl620a
1350<6>[    0.874951 / 01-01 00:00:00.869][4] usbcore: registered new interface driver net1080
1351<6>[    0.874965 / 01-01 00:00:00.869][4] usbcore: registered new interface driver plusb
1352<6>[    0.874979 / 01-01 00:00:00.869][4] usbcore: registered new interface driver rndis_host
1353<6>[    0.874995 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cdc_subset
1354<6>[    0.875008 / 01-01 00:00:00.869][4] usbcore: registered new interface driver zaurus
1355<6>[    0.875031 / 01-01 00:00:00.869][4] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
1356<6>[    0.875049 / 01-01 00:00:00.869][4] usbcore: registered new interface driver int51x1
1357<6>[    0.875063 / 01-01 00:00:00.869][4] usbcore: registered new interface driver kalmia
1358<6>[    0.875076 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ipheth
1359<6>[    0.875090 / 01-01 00:00:00.869][4] usbcore: registered new interface driver sierra_net
1360<6>[    0.875107 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cx82310_eth
1361<6>[    0.875135 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cdc_ncm
1362<6>[    0.875151 / 01-01 00:00:00.869][4] usbcore: registered new interface driver lg-vl600
1363<6>[    0.875164 / 01-01 00:00:00.869][4] usbcore: registered new interface driver qmi_wwan
1364<6>[    0.875179 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cdc_mbim
1365<6>[    0.875194 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ch9200
1366<4>[    0.875204 / 01-01 00:00:00.869][4] CHRDEV "uio" major number 230 goes below the dynamic allocation range
1367<6>[    0.875704 / 01-01 00:00:00.869][4] msm_sharedmem: sharedmem_register_qmi: qmi init successful
1368<6>[    0.883713 / 01-01 00:00:00.879][4] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1369<3>[    0.885220 / 01-01 00:00:00.879][4] msm-usb-ssphy-qmp 88e8000.ssphy: failed to get phandle for msm_ssphy_qmp
1370<3>[    0.888044 / 01-01 00:00:00.879][4] msm-dwc3 a600000.ssusb: unable to get dbm device
1371<6>[    0.888869 / 01-01 00:00:00.879][4] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1372<6>[    0.888880 / 01-01 00:00:00.879][4] ehci-pci: EHCI PCI platform driver
1373<6>[    0.888909 / 01-01 00:00:00.879][4] ehci-platform: EHCI generic platform driver
1374<6>[    0.889101 / 01-01 00:00:00.879][4] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1375<6>[    0.889127 / 01-01 00:00:00.879][4] ohci-pci: OHCI PCI platform driver
1376<6>[    0.889150 / 01-01 00:00:00.879][4] ohci-platform: OHCI generic platform driver
1377<3>[    0.889421 / 01-01 00:00:00.879][0] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1378<6>[    0.889722 / 01-01 00:00:00.879][4] usbcore: registered new interface driver cdc_acm
1379<6>[    0.889730 / 01-01 00:00:00.879][4] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
1380<6>[    0.889746 / 01-01 00:00:00.879][4] usbcore: registered new interface driver cdc_wdm
1381<6>[    0.889774 / 01-01 00:00:00.879][4] usbcore: registered new interface driver usb-storage
1382<6>[    0.889788 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-alauda
1383<6>[    0.889803 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-cypress
1384<6>[    0.889820 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-datafab
1385<6>[    0.889837 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-freecom
1386<6>[    0.889856 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-isd200
1387<6>[    0.889875 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-jumpshot
1388<6>[    0.889893 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-karma
1389<6>[    0.889908 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-onetouch
1390<6>[    0.889928 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-realtek
1391<6>[    0.889943 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-sddr09
1392<6>[    0.889959 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-sddr55
1393<6>[    0.889975 / 01-01 00:00:00.879][4] usbcore: registered new interface driver ums-usbat
1394<6>[    0.890061 / 01-01 00:00:00.889][4] usbcore: registered new interface driver usbserial
1395<6>[    0.890081 / 01-01 00:00:00.889][4] usbcore: registered new interface driver usbserial_generic
1396<6>[    0.890103 / 01-01 00:00:00.889][4] usbserial: USB Serial support registered for generic
1397<6>[    0.890119 / 01-01 00:00:00.889][4] usbcore: registered new interface driver ftdi_sio
1398<6>[    0.890132 / 01-01 00:00:00.889][4] usbserial: USB Serial support registered for FTDI USB Serial Device
1399<6>[    0.890148 / 01-01 00:00:00.889][4] usbcore: registered new interface driver pl2303
1400<6>[    0.890167 / 01-01 00:00:00.889][4] usbserial: USB Serial support registered for pl2303
1401<6>[    0.890184 / 01-01 00:00:00.889][4] usbcore: registered new interface driver usb_ehset_test
1402<6>[    0.890199 / 01-01 00:00:00.889][4] usbcore: registered new interface driver lvs
1403<6>[    0.890479 / 01-01 00:00:00.889][4] fusb252 vendor:fusb252: fusb252_probe
1404<6>[    0.891208 / 01-01 00:00:00.889][4] lgmd18_probe
1405<3>[    0.891249 / 01-01 00:00:00.889][4] lgmd18 vendor:lge,lgmd18: Could not get USB power_supply, deferring probe
1406<4>[    0.891348 / 01-01 00:00:00.889][4] CHRDEV "ttyGS" major number 229 goes below the dynamic allocation range
1407<3>[    0.893044 / 01-01 00:00:00.889][4] fgsi_init: Err allocating ipc_log_ctxt
1408<3>[    0.894569 / 01-01 00:00:00.889][4] qpnp-pdphy c440000.qcom,spmi:qcom,pmi8998@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
1409<6>[    0.895090 / 01-01 00:00:00.889][4] mousedev: PS/2 mouse device common for all mice
1410<6>[    0.895209 / 01-01 00:00:00.889][4] usbcore: registered new interface driver iforce
1411<6>[    0.895239 / 01-01 00:00:00.889][4] usbcore: registered new interface driver xpad
1412<6>[    0.895258 / 01-01 00:00:00.889][4] usbcore: registered new interface driver usb_acecad
1413<6>[    0.895274 / 01-01 00:00:00.889][4] usbcore: registered new interface driver aiptek
1414<6>[    0.895290 / 01-01 00:00:00.889][4] usbcore: registered new interface driver gtco
1415<6>[    0.895306 / 01-01 00:00:00.889][4] usbcore: registered new interface driver hanwang
1416<6>[    0.895328 / 01-01 00:00:00.889][4] usbcore: registered new interface driver kbtab
1417<3>[    0.895375 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49408, lge_ddic = sw49410_rev1
1418<3>[    0.895383 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49409, lge_ddic = sw49410_rev1
1419<3>[    0.895391 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49410, lge_ddic = sw49410_rev1
1420<6>[    0.895398 / 01-01 00:00:00.889][4] [Touch] touch_get_device_type = [3]
1421<6>[    0.895405 / 01-01 00:00:00.889][4] [Touch] touch_device_init: sw49408 not found.
1422<3>[    0.895412 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49408, lge_ddic = sw49410_rev1
1423<3>[    0.895418 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49409, lge_ddic = sw49410_rev1
1424<3>[    0.895424 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49410, lge_ddic = sw49410_rev1
1425<6>[    0.895429 / 01-01 00:00:00.889][4] [Touch] touch_get_device_type = [3]
1426<6>[    0.895436 / 01-01 00:00:00.889][4] [Touch] touch_device_init: sw49409 not found.
1427<3>[    0.895442 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49408, lge_ddic = sw49410_rev1
1428<3>[    0.895448 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49409, lge_ddic = sw49410_rev1
1429<3>[    0.895454 / 01-01 00:00:00.889][4] [Display][lge-dsi-panel:is_ddic_name:134] input ddic_name = sw49410, lge_ddic = sw49410_rev1
1430<6>[    0.895460 / 01-01 00:00:00.889][4] [Touch] touch_get_device_type = [3]
1431<6>[    0.895467 / 01-01 00:00:00.889][4] [Touch] touch_device_init: sw49410 found!
1432<6>[    0.895636 / 01-01 00:00:00.889][4] [Touch] touch_spi_probe
1433<6>[    0.895636 / 01-01 00:00:00.889][4] , platform ptr =           (null)
1434<6>[    0.895645 / 01-01 00:00:00.889][4] [Touch] touch_spi_probe : 6 Mhz, chip_select = 0
1435<6>[    0.895654 / 01-01 00:00:00.889][4] [Touch] platform device register
1436<6>[    0.895768 / 01-01 00:00:00.889][4] [Touch] start dev.of_node
1437<6>[    0.895797 / 01-01 00:00:00.889][4] [Touch] fw_image - 0:touch/judyln/SW49410_L0W60NEO_1_07.img
1438<6>[    0.895809 / 01-01 00:00:00.889][4] [Touch] end dev.of_node
1439<6>[    0.895821 / 01-01 00:00:00.889][4] [Touch] touch_set_device, data:ffffffd370466018
1440<6>[    0.895829 / 01-01 00:00:00.889][4] [Touch] touch_gpio_init - pin:32, name:touch_reset
1441<6>[    0.895845 / 01-01 00:00:00.889][4] [Touch] touch_gpio_direction_output - pin:32, value:1
1442<6>[    0.895866 / 01-01 00:00:00.889][4] [Touch] touch_gpio_init - pin:31, name:touch_int
1443<6>[    0.895873 / 01-01 00:00:00.889][4] [Touch] touch_gpio_direction_input - pin:31
1444<4>[    0.895924 / 01-01 00:00:00.889][4] spi32766.2 supply vdd not found, using dummy regulator
1445<4>[    0.895974 / 01-01 00:00:00.889][4] spi32766.2 supply vio not found, using dummy regulator
1446<6>[    0.896110 / 01-01 00:00:00.889][4] [Touch] pinctrl set active
1447<6>[    0.896150 / 01-01 00:00:00.889][4] [Touch] touch_gpio_direction_output - pin:32, value:0
1448<6>[    0.897194 / 01-01 00:00:00.889][4] [Touch] touch_gpio_direction_output - pin:32, value:1
1449<6>[    0.897341 / 01-01 00:00:00.889][4] [Touch] touch_init_input 1439-3119-255-1439-3119-90-10
1450<6>[    0.897432 / 01-01 00:00:00.889][4] input: touch_dev as /devices/virtual/input/input1
1451<3>[    0.897791 / 01-01 00:00:00.889][4] [Touch E] [sw49410_notify 1665] 3 is not supported
1452<6>[    0.897915 / 01-01 00:00:00.889][4] [Touch] hw_reset_delay : 90 ms
1453<6>[    0.897928 / 01-01 00:00:00.889][4] [Touch] platform device registered ...
1454<3>[    0.897947 / 01-01 00:00:00.889][4] [Touch E] [secure_touch_init 904] failed to get core_clk : -2
1455<3>[    0.897956 / 01-01 00:00:00.889][4] [Touch E] [secure_touch_init 909] failed to get iface_clk : -2
1456<6>[    0.897963 / 01-01 00:00:00.889][4] [Touch] secure_touch_stop : 1
1457<3>[    0.898039 / 01-01 00:00:00.889][4] stmvl53l0_init: Enter
1458<3>[    0.898049 / 01-01 00:00:00.889][4] stmvl53l0_init_cci: Enter
1459<3>[    0.898234 / 01-01 00:00:00.889][4] stmvl53l0_init_cci: End
1460<3>[    0.898241 / 01-01 00:00:00.889][4] stmvl53l0_init: End
1461<6>[    0.898249 / 01-01 00:00:00.889][4] <atmf04><atmf04_init><2573>ATMF04 init Proximity driver: init.
1462<6>[    0.898249 / 01-01 00:00:00.889][4] 
1463<6>[    0.898296 / 01-01 00:00:00.889][0] <atmf04><atmf04_async_init><2564>ATMF04 async init start.
1464<6>[    0.898296 / 01-01 00:00:00.889][0] 
1465<4>[    0.898308 / 01-01 00:00:00.889][1] [gf]async_gf_init, entry
1466<6>[    0.898654 / 01-01 00:00:00.889][2] <atmf04><atmf04_async_init><2569>ATMF04 async init end.
1467<6>[    0.898654 / 01-01 00:00:00.889][2] 
1468<4>[    0.898696 / 01-01 00:00:00.889][1] [gf]gf_probe, entry
1469<6>[    0.898734 / 01-01 00:00:00.889][4] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
1470<4>[    0.898773 / 01-01 00:00:00.889][1] [gf]gf:irq_gpio:121
1471<4>[    0.898794 / 01-01 00:00:00.889][1] [gf]gf: hw_rev: 3300000
1472<4>[    0.898956 / 01-01 00:00:00.889][1] [gf]power on!!
1473<6>[    0.898965 / 01-01 00:00:00.889][4] i2c /dev entries driver
1474<4>[    0.898978 / 01-01 00:00:00.889][1] [gf]
7: [DEBUG] /data001/jenkins/SBS9001/recovery/judy_lao_com_kr_pos_316359/android/kernel/msm-4.9/drivers/input/fingerprint/gf_spi.c:955 gf_regulator_set gf_regulator_set(): power on 
1475<6>[    0.899121 / 01-01 00:00:00.889][1] goodix_fp soc:fingerprint@0: [INFO] regulator_enable on 
1476<6>[    0.899135 / 01-01 00:00:00.889][1] goodix_fp soc:fingerprint@0: [INFO] regulator value : 3300000
1477<4>[    0.899172 / 01-01 00:00:00.899][1] [gf]RST pin status: 0
1478<6>[    0.902346 / 01-01 00:00:00.899][1] input: goodix_fp_key as /devices/virtual/input/input2
1479<6>[    0.902481 / 01-01 00:00:00.899][1] input: fingerprint as /devices/virtual/input/lge_fingerprint
1480<4>[    0.902943 / 01-01 00:00:00.899][0] [gf]gf_setup_irq_pin called enable_irq_wake.
1481<4>[    0.902978 / 01-01 00:00:00.899][0] [gf]gf_probe, exit
1482<4>[    0.903214 / 01-01 00:00:00.899][0] [gf] status = 0x0
1483<4>[    0.903227 / 01-01 00:00:00.899][0] [gf]async_gf_init, exit
1484<6>[    0.904425 / 01-01 00:00:00.899][4] pn547: pn547_probe() start
1485<6>[    0.904439 / 01-01 00:00:00.899][4] pn547:IRQ : 63
1486<6>[    0.904439 / 01-01 00:00:00.899][4] VEN : 12
1487<6>[    0.904439 / 01-01 00:00:00.899][4] FIRM : 62
1488<6>[    0.904514 / 01-01 00:00:00.899][4] pn547_probe : requesting IRQ 321
1489<6>[    0.904702 / 01-01 00:00:00.899][4] pn547: pn547_probe() end
1490<6>[    0.904875 / 01-01 00:00:00.899][4] i2c_geni a88000.i2c: Bus frequency not specified, default to 400KHz.
1491<6>[    0.905260 / 01-01 00:00:00.899][4] i2c_geni a90000.i2c: Bus frequency not specified, default to 400KHz.
1492<6>[    0.906149 / 01-01 00:00:00.899][4] <atmf04><atmf04_probe><2351>ATMF04 probe, kzalloc complete
1493<6>[    0.906149 / 01-01 00:00:00.899][4] 
1494<6>[    0.906169 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,irq-gpio val:135
1495<6>[    0.906169 / 01-01 00:00:00.899][4] 
1496<6>[    0.906181 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,irq2-gpio val:44
1497<6>[    0.906181 / 01-01 00:00:00.899][4] 
1498<6>[    0.906189 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,vdd_ana_supply_min val:1800000
1499<6>[    0.906189 / 01-01 00:00:00.899][4] 
1500<6>[    0.906199 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,vdd_ana_supply_max val:1800000
1501<6>[    0.906199 / 01-01 00:00:00.899][4] 
1502<6>[    0.906209 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,vdd_ana_load_ua val:15000
1503<6>[    0.906209 / 01-01 00:00:00.899][4] 
1504<6>[    0.906218 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,chip_enable val:125
1505<6>[    0.906218 / 01-01 00:00:00.899][4] 
1506<6>[    0.906225 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,InputPinsNum val:2
1507<6>[    0.906225 / 01-01 00:00:00.899][4] 
1508<6>[    0.906234 / 01-01 00:00:00.899][4] <atmf04><controller_parse_dt><2303>DT entry ret:0 name:Adsemicon,fw_name val:-23879488
1509<6>[    0.906234 / 01-01 00:00:00.899][4] 
1510<6>[    0.906242 / 01-01 00:00:00.899][4] <atmf04><atmf04_probe><2374>ATMF04 probe, sku_value: 15
1511<6>[    0.906242 / 01-01 00:00:00.899][4] 
1512<6>[    0.906249 / 01-01 00:00:00.899][4] <atmf04><atmf04_probe><2377>ATMF04 probe, change InitCodeVal_SKU
1513<6>[    0.906249 / 01-01 00:00:00.899][4] 
1514<6>[    0.906318 / 01-01 00:00:00.899][4] <atmf04><controller_platform_hw_init><2182>gpio direction output ok
1515<6>[    0.906318 / 01-01 00:00:00.899][4] 
1516<6>[    0.906340 / 01-01 00:00:00.899][4] <atmf04><controller_platform_hw_init><2232>controller_platform_hw_init entered
1517<6>[    0.906340 / 01-01 00:00:00.899][4] 
1518<6>[    0.906357 / 01-01 00:00:00.899][4] <atmf04><atmf04_probe><2394>**SAR controller BLSP[135]
1519<6>[    0.906740 / 01-01 00:00:00.899][4] input: lge_sar_rf as /devices/virtual/input/lge_sar_rf
1520<6>[    0.906789 / 01-01 00:00:00.899][4] input: lge_sar_rf2 as /devices/virtual/input/lge_sar_rf2
1521<6>[    0.906823 / 01-01 00:00:00.899][4] <atmf04><load_firmware><757>Load Firmware Entered
1522<3>[    0.936863 / 01-01 00:00:00.929][0] ufshcd-qcom 1d84000.ufshc: [LGE][UFS] update quirks, manufacturerid:65535, model:ANY_MODEL, quirk:0x80
1523<3>[    0.942757 / 01-01 00:00:00.939][0] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
1524<5>[    0.943463 / 01-01 00:00:00.939][1] scsi 0:0:0:49488: Well-known LUN    TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1525<5>[    0.944560 / 01-01 00:00:00.939][1] scsi 0:0:0:49456: Well-known LUN    TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1526<5>[    0.945555 / 01-01 00:00:00.939][1] scsi 0:0:0:49476: Well-known LUN    TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1527<5>[    0.946701 / 01-01 00:00:00.939][2] scsi 0:0:0:0: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1528<5>[    0.947564 / 01-01 00:00:00.939][0] scsi 0:0:0:1: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1529<5>[    0.948314 / 01-01 00:00:00.939][2] scsi 0:0:0:2: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1530<5>[    0.949120 / 01-01 00:00:00.939][2] scsi 0:0:0:3: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1531<5>[    0.949931 / 01-01 00:00:00.939][0] scsi 0:0:0:4: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1532<5>[    0.950742 / 01-01 00:00:00.949][1] scsi 0:0:0:5: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1533<5>[    0.951498 / 01-01 00:00:00.949][1] scsi 0:0:0:6: Direct-Access     TOSHIBA  THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
1534<6>[    0.956434 / 01-01 00:00:00.949][2]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27
1535<6>[    0.957399 / 01-01 00:00:00.949][3]  sdb: sdb1 sdb2
1536<6>[    0.958003 / 01-01 00:00:00.949][1]  sdc: sdc1 sdc2
1537<6>[    0.961380 / 01-01 00:00:00.959][0]  sdd: sdd1 sdd2 sdd3
1538<6>[    0.962934 / 01-01 00:00:00.959][0]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53
1539<6>[    0.964106 / 01-01 00:00:00.959][1]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1540<6>[    0.964698 / 01-01 00:00:00.959][3]  sdg: sdg1
1541<6>[    0.980063 / 01-01 00:00:00.979][0] [Touch] touch_ic_init Start
1542<6>[    0.980077 / 01-01 00:00:00.979][0] [Touch] sw49410_init: drm_notif change
1543<6>[    0.980087 / 01-01 00:00:00.979][0] [Touch] sw49410_init: charger_state = 0x00
1544<6>[    0.980623 / 01-01 00:00:00.979][0] spi_geni 894000.spi: tx_fifo 16 rx_fifo 16 tx_width 32
1545<6>[    0.982178 / 01-01 00:00:00.979][0] [Touch] version : v1.07, chip : 17, protocol : 4
1546<6>[    0.982178 / 01-01 00:00:00.979][0] [Touch] chip_rev : 1, fpc : 1, lcm : 1, lot : 1
1547<6>[    0.982178 / 01-01 00:00:00.979][0] [Touch] product id : L0W60NEO
1548<6>[    0.982178 / 01-01 00:00:00.979][0] [Touch] flash boot : idle, done, crc : ok
1549<6>[    0.982199 / 01-01 00:00:00.979][0] [Touch] date : 2018.09.17 07:08:41 Site1
1550<6>[    0.983256 / 01-01 00:00:00.979][1] [Touch] sw49410_setup_q_sensitivity : NORMAL(0)
1551<6>[    0.983268 / 01-01 00:00:00.979][1] [Touch] resume ts->lpwg.screen on
1552<6>[    0.983279 / 01-01 00:00:00.979][1] [Touch] sw49410_tci_control: type= 0
1553<6>[    0.983460 / 01-01 00:00:00.979][1] [Touch] sw49410_lpwg_control mode = 0
1554<6>[    1.006857 / 01-01 00:00:00.999][4] <atmf04><load_firmware><775>Open bin [atmf04/atmf04_2CH_V0.41.fw] ret : 0 
1555<6>[    1.006868 / 01-01 00:00:00.999][4] <atmf04><load_firmware><782>###########fw version : 0.41, fw_version : 41, page_num : 163###########
1556<3>[    1.008078 / 01-01 00:00:00.999][0] lge_sar_rf 4-005a: atmf04_interrupt
1557<3>[    1.008095 / 01-01 00:00:00.999][0] lge_sar_rf 4-005a: atmf04_reschedule_work : set wake lock timeout!
1558<6>[    1.008141 / 01-01 00:00:00.999][0] <atmf04><atmf04_work_handler><2059>probe_end_flag = False[0]
1559<3>[    1.012041 / 01-01 00:00:01.009][0] lge_sar_rf 4-005a: atmf04_interrupt
1560<3>[    1.012055 / 01-01 00:00:01.009][0] lge_sar_rf 4-005a: atmf04_reschedule_work : set wake lock timeout!
1561<6>[    1.012079 / 01-01 00:00:01.009][0] <atmf04><atmf04_work_handler><2059>probe_end_flag = False[0]
1562<6>[    1.016878 / 01-01 00:00:01.009][4] <atmf04><load_firmware><793>SAR controller ATMF04 chip_id read check start
1563<6>[    1.017662 / 01-01 00:00:01.009][4] <atmf04><load_firmware><799>SAR controller ATMF04 chip_id:0xb4 , cnt:0
1564<6>[    1.019141 / 01-01 00:00:01.009][4] <atmf04><load_firmware><816>###########ic version : 0.41, ic_fw_version : 41###########
1565<6>[    1.019152 / 01-01 00:00:01.009][4] <atmf04><load_firmware><924>Not update firmware. Firmware version is lower than ic.(Or same version)
1566<6>[    1.020076 / 01-01 00:00:01.019][1] [Touch] sw49410_tc_driving = 0x0003, 0x181
1567<6>[    1.020377 / 01-01 00:00:01.019][1] [Touch] DDI Display Mode = 0x00000003
1568<6>[    1.020411 / 01-01 00:00:01.019][4] <atmf04><chg_mode><313>change_mode : 180
1569<6>[    1.020411 / 01-01 00:00:01.019][4] 
1570<6>[    1.020638 / 01-01 00:00:01.019][1] LGE BOOT MODE is not RECOVERY!!
1571<6>[    1.020657 / 01-01 00:00:01.019][1] [Touch] get fwpath from def_fwpath : touch/judyln/SW49410_L0W60NEO_1_07.img
1572<6>[    1.020667 / 01-01 00:00:01.019][1] [Touch] fwpath[touch/judyln/SW49410_L0W60NEO_1_07.img]
1573<6>[    1.020680 / 01-01 00:00:01.019][1] [Touch] fw size:99840, data: ffffff94a49dcfd8
1574<6>[    1.021174 / 01-01 00:00:01.019][1] [Touch] tc_status : 0xF5000E1, code_valid:valid, cfg_valid:valid
1575<6>[    1.021187 / 01-01 00:00:01.019][1] [Touch] spr_boot_st : 0x1322, flash_error : ok
1576<6>[    1.021199 / 01-01 00:00:01.019][1] [Touch] bin-ver: 1.07 (L0W60NEO), dev-ver: 1.07 -> update: 0, force_fwup: 0
1577<6>[    1.021213 / 01-01 00:00:01.019][1] [Touch] There is no need to reset (ret: -1)
1578<6>[    1.021241 / 01-01 00:00:01.019][1] [Touch] touch_ic_init Start
1579<6>[    1.021252 / 01-01 00:00:01.019][1] [Touch] sw49410_init: charger_state = 0x00
1580<6>[    1.023131 / 01-01 00:00:01.019][0] [Touch] version : v1.07, chip : 17, protocol : 4
1581<6>[    1.023131 / 01-01 00:00:01.019][0] [Touch] chip_rev : 1, fpc : 1, lcm : 1, lot : 1
1582<6>[    1.023131 / 01-01 00:00:01.019][0] [Touch] product id : L0W60NEO
1583<6>[    1.023131 / 01-01 00:00:01.019][0] [Touch] flash boot : idle, done, crc : ok
1584<6>[    1.023154 / 01-01 00:00:01.019][0] [Touch] date : 2018.09.17 07:08:41 Site1
1585<6>[    1.024746 / 01-01 00:00:01.019][1] [Touch] sw49410_setup_q_sensitivity : NORMAL(0)
1586<6>[    1.024759 / 01-01 00:00:01.019][1] [Touch] resume ts->lpwg.screen on
1587<6>[    1.024768 / 01-01 00:00:01.019][1] [Touch] sw49410_tci_control: type= 0
1588<6>[    1.025066 / 01-01 00:00:01.019][1] [Touch] sw49410_lpwg_control mode = 0
1589<6>[    1.031428 / 01-01 00:00:01.029][4] <atmf04><load_firmware><943>disable ok
1590<6>[    1.031477 / 01-01 00:00:01.029][4] <atmf04><onoff_controller><671>onoff_controller: nparse_mode [1], ch_num:1
1591<6>[    1.031491 / 01-01 00:00:01.029][4] <atmf04><atmf04_probe><2492>interrupt is hooked
1592<6>[    1.031491 / 01-01 00:00:01.029][4] 
1593<0>[    1.031502 / 01-01 00:00:01.029][4] bus probe : 906 lge_sar_rf 125
1594<0>[    1.031539 / 01-01 00:00:01.029][4] drv probe : 905 i2c_geni 125
1595<6>[    1.035691 / 01-01 00:00:01.029][4] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 21
1596<6>[    1.036270 / 01-01 00:00:01.029][4] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 22
1597<6>[    1.037967 / 01-01 00:00:01.029][4] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 23
1598<6>[    1.039666 / 01-01 00:00:01.029][4] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 24
1599<6>[    1.044121 / 01-01 00:00:01.039][4] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 25
1600<6>[    1.044269 / 01-01 00:00:01.039][4] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 26
1601<6>[    1.044350 / 01-01 00:00:01.039][4] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@0x8bf00000
1602<6>[    1.044450 / 01-01 00:00:01.039][4] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 27
1603<6>[    1.044568 / 01-01 00:00:01.039][4] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 28
1604<6>[    1.044722 / 01-01 00:00:01.039][4] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 29
1605<6>[    1.044813 / 01-01 00:00:01.039][4] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 30
1606<3>[    1.045921 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 1 dest 589
1607<3>[    1.046210 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 24 cam_ahb
1608<3>[    1.046431 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 136 dest 512
1609<3>[    1.046542 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 25 cam_hf_1_mnoc
1610<3>[    1.046801 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 146 dest 778
1611<3>[    1.046832 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 26 cam_hf_1_camnoc
1612<3>[    1.046865 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 145 dest 512
1613<3>[    1.046978 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 27 cam_hf_2_mnoc
1614<3>[    1.047209 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 147 dest 778
1615<3>[    1.047240 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 28 cam_hf_2_camnoc
1616<3>[    1.047269 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 137 dest 512
1617<3>[    1.047367 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 29 cam_sf_1_mnoc
1618<3>[    1.047611 / 01-01 00:00:01.039][4] register_client_adhoc:find path.src 148 dest 778
1619<3>[    1.047638 / 01-01 00:00:01.039][4] register_client_adhoc:Client handle 30 cam_sf_1_camnoc
1620<3>[    1.057187 / 01-01 00:00:01.049][5] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff94a3e948a4 bh=0000000000000000 bh_enq_f=ffffff94a5911e38
1621<3>[    1.057202 / 01-01 00:00:01.049][5] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 2933 Failed to unsubscribe error irq rc=-22
1622<6>[    1.060072 / 01-01 00:00:01.059][1] [Touch] sw49410_tc_driving = 0x0003, 0x181
1623<6>[    1.060309 / 01-01 00:00:01.059][1] [Touch] DDI Display Mode = 0x00000003
1624<3>[    1.060346 / 01-01 00:00:01.059][5] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff94a3e948a4 bh=0000000000000000 bh_enq_f=ffffff94a5911e38
1625<3>[    1.060359 / 01-01 00:00:01.059][5] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 2933 Failed to unsubscribe error irq rc=-22
1626<6>[    1.060480 / 01-01 00:00:01.059][1] [Touch] touch_ic_init End
1627<3>[    1.061005 / 01-01 00:00:01.059][5] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 536 No clk named ife_dsp_clk found. Dev vfe2
1628<4>[    1.061014 / 01-01 00:00:01.059][5] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 107 option clk get failed
1629<3>[    1.063495 / 01-01 00:00:01.059][5] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff94a3e948a4 bh=0000000000000000 bh_enq_f=ffffff94a5911e38
1630<3>[    1.063508 / 01-01 00:00:01.059][5] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 2933 Failed to unsubscribe error irq rc=-22
1631<6>[    1.065256 / 01-01 00:00:01.059][5] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 172 Camera ISP probe complete
1632<6>[    1.066562 / 01-01 00:00:01.059][5] CAM_INFO: CAM: cam_res_mgr_probe: 681 Disable shared gpio support.
1633<3>[    1.066939 / 01-01 00:00:01.059][5] stmvl53l0_platform_probe: stmvl53l0_platform_probe Enter
1634<3>[    1.066948 / 01-01 00:00:01.059][5] stmvl53l0_platform_probe: stmvl53l0_platform_probe::pdev->name:ac4a000.qcom,cci:qcom,ldaf@0
1635<3>[    1.066986 / 01-01 00:00:01.059][5] stmvl53l0_default_power_setting: Enter
1636<3>[    1.066992 / 01-01 00:00:01.059][5] stmvl53l0_default_power_setting: End rc:0
1637<3>[    1.067001 / 01-01 00:00:01.059][5] stmvl53l0_platform_probe: msm_init_ldaf_VL53L0
1638<3>[    1.067010 / 01-01 00:00:01.059][5] stmvl53l0_platform_probe: vl53l0_data :ffffffd3747fd400
1639<3>[    1.067019 / 01-01 00:00:01.059][5] stmvl53l0_setup: Enter
1640<3>[    1.067239 / 01-01 00:00:01.059][0] stmvl53l0_poll_thread(822) : Starting Polling thread
1641<6>[    1.067325 / 01-01 00:00:01.059][5] input: STM VL53L0 proximity sensor as /devices/virtual/input/input6
1642<3>[    1.067408 / 01-01 00:00:01.059][5] stmvl53l0_setup: Misc device registration name:ac4a000.qcom,cci:qcom,ldaf@0
1643<3>[    1.067449 / 01-01 00:00:01.059][5] stmvl53l0_setup: support ver. 1.0.5 enabled
1644<3>[    1.067455 / 01-01 00:00:01.059][3] stmvl53l0_setup: End
1645<6>[    1.067732 / 01-01 00:00:01.059][3] [Touch] Init Complete Interrupt!
1646<6>[    1.069227 / 01-01 00:00:01.059][5] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
1647<3>[    1.070635 / 01-01 00:00:01.069][5] CAM_ERR: CAM-EEPROM: cam_eeprom_i2c_driver_probe: 237 e_ctrl->io_master_info.client->addr = 0x0
1648<6>[    1.070882 / 01-01 00:00:01.069][5] CAM_INFO: CAM-OIS: oeis_create_sysfs: 744 create ois_hall_class!!
1649<3>[    1.074884 / 01-01 00:00:01.069][5] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 689 Error: cam-secure already got handle 0x45c61
1650<6>[    1.077138 / 01-01 00:00:01.069][5] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 170 Camera JPEG probe complete
1651<6>[    1.084350 / 01-01 00:00:01.079][5] usbcore: registered new interface driver uvcvideo
1652<6>[    1.084360 / 01-01 00:00:01.079][5] USB Video Class driver (1.1.1)
1653<3>[    1.086051 / 01-01 00:00:01.079][5] IDTP9222: idtp9222_logger_gpios: MSM_GPIO52(<-OD2_N, idtfault):1, MSM_GPIO37(<-PDT_N, detached):1, PMI_GPIO1253(->OFF_P, disabled):0
1654<6>[    1.086629 / 01-01 00:00:01.079][5] PL_DISABLE: effective vote is now 1 voted by CHG_STATE_VOTER,0
1655<6>[    1.087671 / 01-01 00:00:01.079][5] PMI: smblib_request_dpdm: enabling DPDM regulator
1656<6>[    1.088384 / 01-01 00:00:01.079][5] PMI: smblib_rerun_apsd: re-running APSD
1657<6>[    1.088471 / 01-01 00:00:01.079][5] USB_ICL: effective vote is now -22 voted by (null),-22
1658<6>[    1.088482 / 01-01 00:00:01.079][5] DC_SUSPEND: effective vote is now 0 voted by DEFAULT_VOTER,0
1659<6>[    1.088505 / 01-01 00:00:01.079][5] FCC: effective vote is now 2000000 voted by BATT_PROFILE_VOTER,0
1660<6>[    1.088513 / 01-01 00:00:01.079][5] FV: effective vote is now 4395000 voted by BATT_PROFILE_VOTER,0
1661<6>[    1.088520 / 01-01 00:00:01.079][5] DC_ICL: effective vote is now 900000 voted by DEFAULT_VOTER,0
1662<6>[    1.088545 / 01-01 00:00:01.079][5] HVDCP_DISABLE_INDIRECT: effective vote is now 0 voted by DEFAULT_VOTER,0
1663<6>[    1.088552 / 01-01 00:00:01.079][5] HVDCP_ENABLE: effective vote is now 1 voted by HVDCP_INDIRECT_VOTER,0
1664<6>[    1.088559 / 01-01 00:00:01.079][5] HVDCP_HW_INOV_DIS: effective vote is now 0 voted by HVDCP_INDIRECT_VOTER,0
1665<6>[    1.088639 / 01-01 00:00:01.079][5] PD_DISALLOWED_INDIRECT: effective vote is now 1 voted by CC_DETACHED_VOTER,0
1666<6>[    1.088645 / 01-01 00:00:01.079][5] PD_ALLOWED: effective vote is now 0 voted by PD_DISALLOWED_INDIRECT_VOTER,0
1667<6>[    1.088712 / 01-01 00:00:01.079][5] CHG_DISABLE: effective vote is now 0 voted by DEFAULT_VOTER,0
1668<6>[    1.088866 / 01-01 00:00:01.079][5] HVDCP_DISABLE_INDIRECT: effective vote is now 1 voted by PD_INACTIVE_VOTER,1
1669<6>[    1.088872 / 01-01 00:00:01.079][5] HVDCP_ENABLE: effective vote is now 0 voted by HVDCP_INDIRECT_VOTER,0
1670<6>[    1.088877 / 01-01 00:00:01.079][5] HVDCP_HW_INOV_DIS: effective vote is now 1 voted by HVDCP_INDIRECT_VOTER,0
1671<3>[    1.089624 / 01-01 00:00:01.079][5] VENEER: 32 is overlapped in veneer_extension_pspoverlap
1672<6>[    1.089885 / 01-01 00:00:01.079][5] AWAKE: effective vote is now 1 voted by PL_DELAY_VOTER,0
1673<6>[    1.089908 / 01-01 00:00:01.079][5] PMI: smblib_usb_plugin_locked: IRQ: usbin-plugin attached
1674<6>[    1.090297 / 01-01 00:00:01.089][5] USB-ID: Not initiated yet, refer to boot USBID OPEN
1675<6>[    1.090468 / 01-01 00:00:01.089][5] PMI: override_handle_usb_plugin: VBUS : risen
1676<6>[    1.090524 / 01-01 00:00:01.089][5] fusb252 vendor:fusb252: qcom,qpnp-smb2 registered "Factory Cable ID"
1677<6>[    1.090575 / 01-01 00:00:01.089][5] fusb252 vendor:fusb252: qcom,qpnp-smb2 registered "AUX"
1678<6>[    1.090583 / 01-01 00:00:01.089][5] fusb252 vendor:fusb252: qcom,qpnp-smb2 registered "USB ID"
1679<6>[    1.090608 / 01-01 00:00:01.089][5] fusb252 vendor:fusb252: /OE(0), SEL(0), current flag is "AUX"
1680<6>[    1.090651 / 01-01 00:00:01.089][5] PMI: smblib_handle_typec_cc_state_change: TypeC SOURCE_DEFAULT insertion
1681<6>[    1.090706 / 01-01 00:00:01.089][5] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
1682<6>[    1.090749 / 01-01 00:00:01.089][5] PMI: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
1683<6>[    1.090759 / 01-01 00:00:01.089][5] PMI: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
1684<6>[    1.090767 / 01-01 00:00:01.089][5] PMI: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
1685<6>[    1.090790 / 01-01 00:00:01.089][5] [W/A] FDR) pstype=0, running=0, ready=0
1686<6>[    1.090915 / 01-01 00:00:01.089][5] PMI: override_handle_chg_state_change: chg_state_change to 0x3
1687<6>[    1.090946 / 01-01 00:00:01.089][5] PMI: smblib_handle_chg_state_change: IRQ: determine-initial-status
1688<6>[    1.091059 / 01-01 00:00:01.089][5] PMI: smblib_handle_wdog_bark: IRQ: determine-initial-status
1689<3>[    1.093173 / 01-01 00:00:01.089][5] power_supply battery: driver failed to report `capacity_raw' property: -22
1690<6>[    1.093758 / 01-01 00:00:01.089][5] PL_ENABLE_INDIRECT: effective vote is now 0 voted by USBIN_I_VOTER,0
1691<6>[    1.098816 / 01-01 00:00:01.089][4] [W/A] RSU-?) AICL_STATUS_REG(0x160a):0x40, POWER_PATH_STATUS_REG(0x160b):0x95 USB_INT_RT_STS(0x1310):0x10
1692<6>[    1.098827 / 01-01 00:00:01.089][4] [W/A] RSU-#) Exiting recovery for USBIN-suspend.
1693<6>[    1.098885 / 01-01 00:00:01.089][4] QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 3
1694<3>[    1.099615 / 01-01 00:00:01.089][5] power_supply battery: driver failed to report `capacity_raw' property: -22
1695<6>[    1.099755 / 01-01 00:00:01.089][4] [QNI-INFO] [debounce=1, time=900000, soc=229, esr=150000, volt=100000, therm=150], [probation=1, step_min=700000, min_fv=4400000, max_fcc=950000, enter_fcc=1000000]
1696<6>[    1.099767 / 01-01 00:00:01.089][4] QNOVO_CHG_READY: effective vote is now 0 voted by USB_READY_VOTER,0
1697<6>[    1.099777 / 01-01 00:00:01.089][4] QNOVO_NOT_OK: effective vote is now 1 voted by CHG_READY_VOTER,0
1698<6>[    1.099785 / 01-01 00:00:01.089][4] QNOVO_DISABLE: effective vote is now 1 voted by ok_to_qnovo_voter,0
1699<6>[    1.099819 / 01-01 00:00:01.089][4] AUTO_ESR: effective vote is now 1 voted by QNOVO_OVERALL_VOTER,0
1700<6>[    1.099827 / 01-01 00:00:01.089][4] QNOVO_PT_DIS: effective vote is now 1 voted by QNOVO_OVERALL_VOTER,0
1701<6>[    1.099837 / 01-01 00:00:01.089][4] QNOVO_AWAKE: effective vote is now 0 voted by PT_RESTART_VOTER,0
1702<6>[    1.100478 / 01-01 00:00:01.099][4] QNOVO_AWAKE: effective vote is now 1 voted by USB_READY_VOTER,1
1703<3>[    1.101193 / 01-01 00:00:01.099][4] UNINODE: unified_nodes_init: platform_device_register : unified_nodes_device
1704<3>[    1.101547 / 01-01 00:00:01.099][4] VENEER: veneer_init: platform_driver_register : veneer_driver
1705<3>[    1.103329 / 01-01 00:00:01.099][4] CEIL: charging_ceiling_create: Ceiling created
1706<6>[    1.103382 / 01-01 00:00:01.099][4] BTP: protection_battemp_create: Complete to create
1707<3>[    1.103399 / 01-01 00:00:01.099][4] VENEER: feed_protection_battemp: battery status is invalid
1708<6>[    1.103409 / 01-01 00:00:01.099][4] BTP: polling_status_work: temperature is not valid.
1709<3>[    1.103435 / 01-01 00:00:01.099][4] BVP: protection_batvolt_create: Complete to create, threshold_vbat_limit(4250), threshold_vbat_clear(4200), threshold_ibat_rated(2023), step_ibat_ma(100), step_poll_ms(5000)
1710<3>[    1.103454 / 01-01 00:00:01.099][4] SHOWCASE: showcase_create_parsedt: soc-min : 45, soc-max : 50 of lge,soc-range-default
1711<3>[    1.103462 / 01-01 00:00:01.099][4] SHOWCASE: protection_showcase_create: Complete to create
1712<3>[    1.103472 / 01-01 00:00:01.099][4] USBIO: protection_usbio_create: Complete to create
1713<3>[    1.103482 / 01-01 00:00:01.099][4] UNINODE: unified_nodes_create: Creating unified nodes
1714<3>[    1.103532 / 01-01 00:00:01.099][4] UNINODE: unified_nodes_create: Success to create unified nodes
1715<6>[    1.104506 / 01-01 00:00:01.099][4] SYMLNK: unified_sysfs_create: Created.
1716<6>[    1.104604 / 01-01 00:00:01.099][4] PMINFO: [VOT] IUSB:0((null)), IBAT:2000(BATT_PROFILE_VOTER), IDC:900(DEFAULT_VOTER), FLOAT:4395(BATT_PROFILE_VOTER), CHDIS:0(DEFAULT_VOTER), PLDIS:1(PL_DELAY_VOTER)
1717<6>[    1.104806 / 01-01 00:00:01.099][4] PMINFO: [CHG] NAME:, STAT:UNKNOWN(ret)/CHARGING(ori)/FULLON(reg), PATH:0x95 [QNI] en=0(sts=0x0, ctrl=0xE7), pt_en=0(sts=0x0), pt_t=54
1718<6>[    1.104911 / 01-01 00:00:01.099][4] PMINFO: [USB] REAL:UNKNOWN, VNOW:0, TPMI:1, TSMB:-2, IUSB:0(now)<=500(set)<=0(cap), IBAT:-1(now):=2000(pmi)+0(smb)<=2000(cap), PRLL:CHGEN(-2)/PINEN(-2)/SUSPN(-2), [OVR] LATCHED:0, AFTAPSD:0, USBMODE:0x00
1719<6>[    1.104920 / 01-01 00:00:01.099][4] PMINFO: --------------------------------------------------------------------------------------A_N-END.
1720<3>[    1.110068 / 01-01 00:00:01.109][4] power_supply veneer: driver failed to report `time_to_full_now' property: -22
1721<6>[    1.117784 / 01-01 00:00:01.109][4] bcl_peripheral:bcl_set_ibat Ibat:85 irq enable
1722<6>[    1.118282 / 01-01 00:00:01.109][4] bcl_peripheral:bcl_set_vbat vbat:87 irq enable
1723<3>[    1.118613 / 01-01 00:00:01.109][4] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1724<4>[    1.118626 / 01-01 00:00:01.109][4] thermal thermal_zone64: failed to read out thermal zone (-61)
1725<3>[    1.118637 / 01-01 00:00:01.109][4] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1726<4>[    1.118647 / 01-01 00:00:01.109][4] thermal thermal_zone64: failed to read out thermal zone (-61)
1727<3>[    1.118680 / 01-01 00:00:01.109][4] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1728<4>[    1.120284 / 01-01 00:00:01.119][4] 17d41000.qcom,cpucc:qcom,limits-dcvs@0 supply isens_vref not found, using dummy regulator
1729<3>[    1.120338 / 01-01 00:00:01.119][4] msm_lmh_dcvs:limits_isens_vref_ldo_init Regulator:isens_vref settings read error:-22
1730<3>[    1.131682 / 01-01 00:00:01.129][4] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1731<4>[    1.131693 / 01-01 00:00:01.129][4] thermal thermal_zone64: failed to read out thermal zone (-61)
1732<3>[    1.132735 / 01-01 00:00:01.129][5] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1733<4>[    1.132745 / 01-01 00:00:01.129][5] thermal thermal_zone64: failed to read out thermal zone (-61)
1734<3>[    1.133801 / 01-01 00:00:01.129][6] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1735<4>[    1.133811 / 01-01 00:00:01.129][6] thermal thermal_zone64: failed to read out thermal zone (-61)
1736<3>[    1.134858 / 01-01 00:00:01.129][7] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1737<4>[    1.134868 / 01-01 00:00:01.129][7] thermal thermal_zone64: failed to read out thermal zone (-61)
1738<6>[    1.145547 / 01-01 00:00:01.139][4] device-mapper: uevent: version 1.0.3
1739<6>[    1.145695 / 01-01 00:00:01.139][4] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
1740<6>[    1.145923 / 01-01 00:00:01.139][4] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1741<6>[    1.145923 / 01-01 00:00:01.139][4] 
1742<3>[    1.146272 / 01-01 00:00:01.139][4] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
1743<6>[    1.146300 / 01-01 00:00:01.139][4] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1744<3>[    1.146309 / 01-01 00:00:01.139][4] bt_dt_parse_clk_info: clocks is not provided in device tree
1745<3>[    1.146317 / 01-01 00:00:01.139][4] bt_power_populate_dt_pinfo: clock not provided in device tree
1746<4>[    1.146446 / 01-01 00:00:01.139][4] CHRDEV "bt" major number 228 goes below the dynamic allocation range
1747<6>[    1.146964 / 01-01 00:00:01.139][4] sdhci: Secure Digital Host Controller Interface driver
1748<6>[    1.146971 / 01-01 00:00:01.139][4] sdhci: Copyright(c) Pierre Ossman
1749<6>[    1.146977 / 01-01 00:00:01.139][4] sdhci-pltfm: SDHCI platform and OF driver helper
1750<4>[    1.149233 / 01-01 00:00:01.139][1] sdhci_msm 8804000.sdhci: sdhci_msm_probe: ICE device is not enabled
1751<3>[    1.150196 / 01-01 00:00:01.149][4] register_client_adhoc:find path.src 81 dest 512
1752<4>[    1.150742 / 01-01 00:00:01.149][4] CHRDEV "hidraw" major number 227 goes below the dynamic allocation range
1753<6>[    1.150765 / 01-01 00:00:01.149][4] hidraw: raw HID events driver (C) Jiri Kosina
1754<3>[    1.150982 / 01-01 00:00:01.149][1] register_client_adhoc:find path.src 1 dest 608
1755<3>[    1.151247 / 01-01 00:00:01.149][1] register_client_adhoc:Client handle 31 sdhc2
1756<4>[    1.151464 / 01-01 00:00:01.149][4] CHRDEV "roccat" major number 224 goes below the dynamic allocation range
1757<6>[    1.151835 / 01-01 00:00:01.149][4] usbcore: registered new interface driver usbhid
1758<6>[    1.151842 / 01-01 00:00:01.149][4] usbhid: USB HID core driver
1759<6>[    1.151915 / 01-01 00:00:01.149][4] ashmem: initialized
1760<6>[    1.152398 / 01-01 00:00:01.149][4] ipa_ut ipa_ut_module_init:1044 Loading IPA test module...
1761<6>[    1.152545 / 01-01 00:00:01.149][4] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
1762<4>[    1.155915 / 01-01 00:00:01.149][4] CHRDEV "seemplog" major number 223 goes below the dynamic allocation range
1763<3>[    1.156390 / 01-01 00:00:01.149][4] seemp: seemp_logk_init: SCM call failed with ret val = 0 -3 0
1764<6>[    1.166402 / 01-01 00:00:01.159][1] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode
1765<6>[    1.210741 / 01-01 00:00:01.209][0] send_sd_slot_tray_state: TRAY_STATE=INSERTED
1766<0>[    1.211008 / 01-01 00:00:01.209][0] drv probe : 1147 sdhci_msm 63
1767<6>[    1.212124 / 01-01 00:00:01.209][4] bimc-bwmon 1436400.qcom,cpu-bwmon: BW HWmon governor registered.
1768<6>[    1.212173 / 01-01 00:00:01.209][4] bimc-bwmon 114a000.qcom,llcc-bwmon: BW HWmon governor registered.
1769<6>[    1.213525 / 01-01 00:00:01.209][4] arm-memlat-mon soc:qcom,cpu0-memlat-mon: Memory Latency governor registered.
1770<6>[    1.213572 / 01-01 00:00:01.209][4] arm-memlat-mon soc:qcom,cpu4-memlat-mon: Memory Latency governor registered.
1771<6>[    1.213616 / 01-01 00:00:01.209][4] arm-memlat-mon soc:qcom,cpu0-l3lat-mon: Memory Latency governor registered.
1772<6>[    1.213641 / 01-01 00:00:01.209][4] arm-memlat-mon soc:qcom,cpu4-l3lat-mon: Memory Latency governor registered.
1773<6>[    1.213669 / 01-01 00:00:01.209][4] arm-memlat-mon soc:qcom,devfreq-compute: Compute governor registered.
1774<3>[    1.214513 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 1 dest 770
1775<3>[    1.214710 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 32 soc:qcom,cpubw
1776<3>[    1.215288 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 129 dest 512
1777<3>[    1.215336 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 33 soc:qcom,llccbw
1778<3>[    1.216984 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 1 dest 512
1779<3>[    1.217072 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 34 soc:qcom,memlat-cpu0
1780<3>[    1.217291 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 1 dest 512
1781<3>[    1.217375 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 35 soc:qcom,memlat-cpu4
1782<3>[    1.217592 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 139 dest 627
1783<3>[    1.217653 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 36 soc:qcom,snoc_cnoc_keepalive
1784<3>[    1.217809 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 1 dest 512
1785<3>[    1.217894 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 37 soc:qcom,mincpubw
1786<3>[    1.218190 / 01-01 00:00:01.209][4] register_client_adhoc:find path.src 26 dest 512
1787<3>[    1.218245 / 01-01 00:00:01.209][4] register_client_adhoc:Client handle 38 soc:qcom,gpubw
1788<4>[    1.218885 / 01-01 00:00:01.209][4] CHRDEV "esoc" major number 222 goes below the dynamic allocation range
1789<4>[    1.219144 / 01-01 00:00:01.209][4] CHRDEV "sensors" major number 221 goes below the dynamic allocation range
1790<4>[    1.219232 / 01-01 00:00:01.209][4] broadcast_tdmb_drv_check_module_init device driver is not registered yet
1791<4>[    1.219246 / 01-01 00:00:01.209][4] broadcast_tdmb_fc8080_drv_init!!! 0
1792<0>[    1.219505 / 01-01 00:00:01.209][4] tspdrv: !  dw7800_probe: dw7800_parse_dt.
1793<0>[    1.219511 / 01-01 00:00:01.209][4] tspdrv: !  dw7800_probe: After regulator_get.
1794<0>[    1.219514 / 01-01 00:00:01.209][4] tspdrv: !  dw7800_probe: regulator_enable.
1795<3>[    1.220643 / 01-01 00:00:01.219][0] [LGE][mmc_attach_sd]mmc_send_app_op_cond : 0
1796<0>[    1.312983 / 01-01 00:00:01.309][0] tspdrv: !  dw7800_probe: After dw7800_poweron.
1797<0>[    1.313300 / 01-01 00:00:01.309][0] tspdrv: !  dw7800_probe.
1798<0>[    1.313316 / 01-01 00:00:01.309][0] bus probe : 1219 dw7800 93
1799<6>[    1.316125 / 01-01 00:00:01.309][0] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 6.3
1800<6>[    1.316263 / 01-01 00:00:01.309][0] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-400C-V003-20181120_223915_59759_88593
1801<4>[    1.316333 / 01-01 00:00:01.309][0] CHRDEV "trustonic_tee" major number 220 goes below the dynamic allocation range
1802<6>[    1.316682 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd-usb-audio
1803<6>[    1.316718 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd-ua101
1804<6>[    1.316755 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd-usb-caiaq
1805<6>[    1.316788 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd-usb-6fire
1806<6>[    1.316822 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd-usb-hiface
1807<6>[    1.316852 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd-bcd2000
1808<6>[    1.316880 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd_usb_pod
1809<6>[    1.316909 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd_usb_podhd
1810<6>[    1.316935 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd_usb_toneport
1811<6>[    1.316962 / 01-01 00:00:01.309][0] usbcore: registered new interface driver snd_usb_variax
1812<5>[    1.334717 / 01-01 00:00:01.329][0] es9218_init()
1813<6>[    1.334758 / 01-01 00:00:01.329][0] es9218_probe: enter.
1814<6>[    1.334780 / 01-01 00:00:01.329][0] es9218_populate_get_pdata: reset gpio 1248
1815<6>[    1.334794 / 01-01 00:00:01.329][0] es9218_populate_get_pdata: hph switch 1270
1816<6>[    1.334805 / 01-01 00:00:01.329][0] es9218_populate_get_pdata: power gpio 40
1817<6>[    1.334814 / 01-01 00:00:01.329][0] es9218_populate_get_pdata: always-power-on is [enabled]
1818<6>[    1.334823 / 01-01 00:00:01.329][0] es9218_populate_get_pdata: use-internal-ldo is [enabled]
1819<6>[    1.335201 / 01-01 00:00:01.329][0] es9218_probe: snd_soc_register_codec ret = 0
1820<6>[    1.335543 / 01-01 00:00:01.329][0] tfa98xx_i2c_init(): TFA98XX driver version v4.2.0-Jan.24,2017
1821<6>[    1.335643 / 01-01 00:00:01.329][0] tfa98xx_i2c_probe(): tfa98xx_i2c_probe: start probing
1822<6>[    1.335651 / 01-01 00:00:01.329][0] tfa98xx_i2c_probe(): addr=0x34
1823<6>[    1.335708 / 01-01 00:00:01.329][0] tfa98xx_parse_dt(): tfa98xx_parse_dt: firmware-name result is Tfa9872.cnt
1824<6>[    1.336054 / 01-01 00:00:01.329][0] tfa98xx_i2c_probe(): TFA9872 detected
1825<6>[    1.336066 / 01-01 00:00:01.329][0] tfa98xx_append_i2c_address(): dai_drv[0].name=tfa98xx-aif-0-34
1826<6>[    1.336074 / 01-01 00:00:01.329][0] tfa98xx_append_i2c_address(): dai_drv[0].playback.stream_name=AIF Playback-0-34
1827<6>[    1.336083 / 01-01 00:00:01.329][0] tfa98xx_append_i2c_address(): dai_drv[0].capture.stream_name=AIF Capture-0-34
1828<6>[    1.336099 / 01-01 00:00:01.329][0] tfa98xx 0-0034: Skipping IRQ registration
1829<6>[    1.336163 / 01-01 00:00:01.329][0] tfa98xx_i2c_probe(): tfa98xx_i2c_probe: Probe completed successfully!
1830<4>[    1.337612 / 01-01 00:00:01.329][0] CHRDEV "avtimer" major number 219 goes below the dynamic allocation range
1831<3>[    1.338914 / 01-01 00:00:01.329][1] apr_probe: Unable to create ipc log context
1832<6>[    1.339439 / 01-01 00:00:01.329][1] GACT probability NOT on
1833<6>[    1.339458 / 01-01 00:00:01.329][1] Mirror/redirect action on
1834<6>[    1.339745 / 01-01 00:00:01.329][1] netem: version 1.3
1835<6>[    1.339756 / 01-01 00:00:01.329][1] u32 classifier
1836<6>[    1.339763 / 01-01 00:00:01.329][1]     Actions configured
1837<6>[    1.339774 / 01-01 00:00:01.329][1] Netfilter messages via NETLINK v0.30.
1838<6>[    1.339907 / 01-01 00:00:01.329][1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1839<6>[    1.340006 / 01-01 00:00:01.329][1] ctnetlink v0.93: registering with nfnetlink.
1840<6>[    1.340233 / 01-01 00:00:01.339][5] xt_time: kernel timezone is -0000
1841<6>[    1.340267 / 01-01 00:00:01.339][5] IPv4 over IPsec tunneling driver
1842<6>[    1.340383 / 01-01 00:00:01.339][5] ip_tables: (C) 2000-2006 Netfilter Core Team
1843<6>[    1.340433 / 01-01 00:00:01.339][5] arp_tables: arp_tables: (C) 2002 David S. Miller
1844<6>[    1.340450 / 01-01 00:00:01.339][5] Initializing XFRM netlink socket
1845<6>[    1.340517 / 01-01 00:00:01.339][5] NET: Registered protocol family 10
1846<6>[    1.340921 / 01-01 00:00:01.339][5] mip6: Mobile IPv6
1847<6>[    1.340930 / 01-01 00:00:01.339][5] ip6_tables: (C) 2000-2006 Netfilter Core Team
1848<6>[    1.341080 / 01-01 00:00:01.339][5] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1849<6>[    1.341269 / 01-01 00:00:01.339][5] fullmesh registered
1850<6>[    1.341273 / 01-01 00:00:01.339][5] ndiffports registered
1851<6>[    1.341279 / 01-01 00:00:01.339][5] binder registered
1852<6>[    1.341284 / 01-01 00:00:01.339][5] roundrobin registered
1853<6>[    1.341287 / 01-01 00:00:01.339][5] NET: Registered protocol family 17
1854<6>[    1.341294 / 01-01 00:00:01.339][5] NET: Registered protocol family 15
1855<6>[    1.341306 / 01-01 00:00:01.339][5] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1856<6>[    1.341310 / 01-01 00:00:01.339][5] Ebtables v2.0 registered
1857<6>[    1.341376 / 01-01 00:00:01.339][5] l2tp_core: L2TP core driver, V2.0
1858<6>[    1.341381 / 01-01 00:00:01.339][5] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1859<6>[    1.341384 / 01-01 00:00:01.339][5] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1860<6>[    1.341392 / 01-01 00:00:01.339][5] l2tp_netlink: L2TP netlink interface
1861<6>[    1.341405 / 01-01 00:00:01.339][5] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1862<6>[    1.341409 / 01-01 00:00:01.339][5] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1863<6>[    1.341439 / 01-01 00:00:01.339][5] sctp: Hash tables configured (bind 256/256)
1864<6>[    1.341710 / 01-01 00:00:01.339][5] NET: Registered protocol family 27
1865<3>[    1.341752 / 01-01 00:00:01.339][5] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
1866<6>[    1.342043 / 01-01 00:00:01.339][5] camera_rear_dvdd_ldo: supplied by pm8998_s4
1867<6>[    1.342402 / 01-01 00:00:01.339][5] camera_wide_dvdd_ldo: supplied by pm8998_s4
1868<6>[    1.342697 / 01-01 00:00:01.339][5] camera_wide_avdd_ldo: supplied by pmi8998_bob
1869<6>[    1.342981 / 01-01 00:00:01.339][5] camera_wide_iovdd_ldo: supplied by pmi8998_bob
1870<6>[    1.343264 / 01-01 00:00:01.339][5] camera_front_dvdd_ldo: supplied by pm8998_s4
1871<6>[    1.343560 / 01-01 00:00:01.339][5] ois_regulator: supplied by pmi8998_bob
1872<6>[    1.343836 / 01-01 00:00:01.339][5] ois2_regulator: supplied by pmi8998_bob
1873<3>[    1.345495 / 01-01 00:00:01.339][5] minidump-id not found for adsp
1874<6>[    1.345621 / 01-01 00:00:01.339][5] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
1875<3>[    1.345898 / 01-01 00:00:01.339][5] minidump-id not found for slpi
1876<6>[    1.345989 / 01-01 00:00:01.339][5] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
1877<3>[    1.346153 / 01-01 00:00:01.339][5] minidump-id not found for cdsp
1878<6>[    1.346244 / 01-01 00:00:01.339][5] subsys-pil-tz 8300000.qcom,turing: for cdsp segments only will be dumped.
1879<6>[    1.346367 / 01-01 00:00:01.339][5] pil_mss_loadable_init : pil mss loadable init..
1880<6>[    1.346447 / 01-01 00:00:01.339][5] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
1881<6>[    1.346556 / 01-01 00:00:01.339][5] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node mba_region@0x96500000
1882<3>[    1.346865 / 01-01 00:00:01.339][5] msm-usb-ssphy-qmp 88e8000.ssphy: failed to get phandle for msm_ssphy_qmp
1883<3>[    1.348021 / 01-01 00:00:01.339][5] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a704000
1884<3>[    1.348026 / 01-01 00:00:01.339][5] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a704000
1885<3>[    1.348030 / 01-01 00:00:01.339][5] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a704000
1886<3>[    1.348033 / 01-01 00:00:01.339][5] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a704000
1887<3>[    1.348036 / 01-01 00:00:01.339][5] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a704000
1888<6>[    1.348038 / 01-01 00:00:01.339][5] sps:BAM 0x000000000a704000 is registered.
1889<3>[    1.348108 / 01-01 00:00:01.339][5] msm-dwc3 a600000.ssusb: unable to get ssphy device
1890<3>[    1.348243 / 01-01 00:00:01.339][5] ipa_rm ipa_rm_delete_resource:155 resource does not exist
1891<3>[    1.348248 / 01-01 00:00:01.339][5] usb_bam_ipa_delete_resources: Failed to delete USB_PROD resource
1892<3>[    1.348252 / 01-01 00:00:01.339][5] ipa_rm ipa_rm_delete_resource:155 resource does not exist
1893<3>[    1.348255 / 01-01 00:00:01.339][5] usb_bam_ipa_delete_resources: Failed to delete USB_CONS resource
1894<6>[    1.348559 / 01-01 00:00:01.339][5] lgmd18_probe
1895<6>[    1.348578 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: lgmd18 registered "SBU Disable"
1896<6>[    1.348582 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: lgmd18 registered "SBU Moisture Detected"
1897<6>[    1.348586 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: lgmd18 registered "SBU Moisture Detecting"
1898<6>[    1.348590 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: lgmd18 registered "Edge Moisture Detected"
1899<6>[    1.348593 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: lgmd18 registered "USB ID"
1900<6>[    1.348597 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: lgmd18 registered "Edge Moisture Detecting"
1901<6>[    1.349467 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: usbpd registered "AUX"
1902<6>[    1.349472 / 01-01 00:00:01.339][5] fusb252 vendor:fusb252: usbpd registered "UART"
1903<3>[    1.349479 / 01-01 00:00:01.339][5] usbpd usbpd0: Ignore psy_changed because PE_START is 0
1904<6>[    1.349487 / 01-01 00:00:01.339][5] msm_geni_serial_cons_pm: change pm : 0 to 3  
1905<6>[    1.349558 / 01-01 00:00:01.339][5] geni_uart_console_status : 2 to 0
1906<6>[    1.350189 / 01-01 00:00:01.349][5] FG: extension_fg_load_dt: [tempcomp config] table count: done (3/3), rise cut filter: enabled (trigger = 430 degree), fall cut filter: disabled (trigger = -999 degree)
1907<6>[    1.355088 / 01-01 00:00:01.349][1] FG: fg_soc_update_irq_handler: irq 998 triggered
1908<3>[    1.355091 / 01-01 00:00:01.349][0] spmi spmi-0: cleanup_irq apid=219 sid=0x2 per=0x40 irq=3
1909<6>[    1.357546 / 01-01 00:00:01.349][5] FG_DELTA_BSOC_IRQ: effective vote is now 0 voted by fg_delta_bsoc_irq,0
1910<6>[    1.357551 / 01-01 00:00:01.349][5] FG_BATT_MISS_IRQ: effective vote is now 0 voted by fg_batt_miss_irq,0
1911<6>[    1.357591 / 01-01 00:00:01.349][5] FG: fg_gen3_probe: battery SOC:50 voltage: 4126210uV temp: 350
1912<3>[    1.357719 / 01-01 00:00:01.349][5] qcom,fg-gen3 c440000.qcom,spmi:qcom,pmi8998@2:qpnp,fg: thermal_zone_of_sensor_register() failed rc:-19
1913<6>[    1.357732 / 01-01 00:00:01.349][5] FG: fg_gen3_probe: FG GEN3 driver probed successfully
1914<3>[    1.370043 / 01-01 00:00:01.369][5] FG: fg_psy_get_property: unsupported property 5
1915<6>[    1.370082 / 01-01 00:00:01.369][5] FG: calculate_battery_temperature: not ready icoeff. raw temp=350
1916<6>[    1.370462 / 01-01 00:00:01.369][5] WLC_VOLTAGE: effective vote is now -22 voted by (null),-22
1917<6>[    1.370514 / 01-01 00:00:01.369][5] FG: calculate_battery_temperature: not ready icoeff. raw temp=350
1918<6>[    1.370544 / 01-01 00:00:01.369][5] WLC_DISABLE: effective vote is now 1 voted by DISABLE_BY_USB,0
1919<6>[    1.371968 / 01-01 00:00:01.369][5] FG: extension_battery_cycle: Battery cycle : 177 (= 1417 / 8)
1920<3>[    1.400081 / 01-01 00:00:01.399][5] IDTP9222: idtp9222_disable_callback: idtp9222_disable_callback is written success! : 1
1921<3>[    1.400085 / 01-01 00:00:01.399][5] VENEER: psy_external_changed: externally changed : B:CAPACITY B:VOLTAGE_NOW B:TEMP U:PRESENT 
1922<3>[    1.400091 / 01-01 00:00:01.399][5] VENEER: update_veneer_status: pseudo_status is updated to 1
1923<3>[    1.400094 / 01-01 00:00:01.399][5] VENEER: charging_wakelock_acquire: veneer: charging
1924<3>[    1.400098 / 01-01 00:00:01.399][5] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 0
1925<3>[    1.400108 / 01-01 00:00:01.399][5] UNINODE: charger_incompatible_store: Storing 0
1926<3>[    1.400112 / 01-01 00:00:01.399][5] VENEER: update_veneer_uninodes: mw_now = 0
1927<3>[    1.400116 / 01-01 00:00:01.399][5] UNINODE: charger_highspeed_store: Storing 0
1928<3>[    1.400120 / 01-01 00:00:01.399][5] UNINODE: charger_name_store: Storing UNKNOWN
1929<6>[    1.400125 / 01-01 00:00:01.399][5] CHGTIME: charging_time_update: Charging stopped
1930<6>[    1.400160 / 01-01 00:00:01.399][0] [Touch] NOTIFY_CONNECTION!
1931<6>[    1.400168 / 01-01 00:00:01.399][0] [Touch] TA Type: 1
1932<6>[    1.400176 / 01-01 00:00:01.399][0] [Touch] sw49410_connect: write charger_state = 0x01
1933<6>[    1.400218 / 01-01 00:00:01.399][5] FG: calculate_battery_temperature: not ready icoeff. raw temp=350
1934<6>[    1.400236 / 01-01 00:00:01.399][5] BTP: polling_status_work: HEALTH_UNKNOWN(0) -> HEALTH_GOOD(4), temperature=350
1935<3>[    1.400241 / 01-01 00:00:01.399][5] VENEER: back_protection_battemp: BTP health 0 -> 1
1936<3>[    1.400244 / 01-01 00:00:01.399][5] VENEER: back_protection_battemp: BTP mcurrent 2890 -> 2890
1937<3>[    1.400247 / 01-01 00:00:01.399][5] VENEER: back_protection_battemp: BTP mvfloat 4400 -> 4400
1938<6>[    1.400683 / 01-01 00:00:01.399][0] [LGE][MMC][mmc_read_ssr      ( )] mmc_hostname:mmc0, 4 ==> SPEED_CLASS 10
1939<6>[    1.414449 / 01-01 00:00:01.409][0] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
1940<6>[    1.414458 / 01-01 00:00:01.409][0] [LGE][MMC][mmc_add_card      ( )] mmc_hostname:mmc0, type:SDXC
1941<6>[    1.416000 / 01-01 00:00:01.409][0] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3f) latency=-1
1942<6>[    1.416010 / 01-01 00:00:01.409][0] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc0) latency=-1
1943<6>[    1.416091 / 01-01 00:00:01.409][0] mmcblk0: mmc0:aaaa SC128 119 GiB 
1944<6>[    1.418423 / 01-01 00:00:01.409][0]  mmcblk0: p1
1945<6>[    1.418640 / 01-01 00:00:01.409][0] [LGE][MMC][mmc_add_card      ( )] device_add & uevent posting complete!
1946<6>[    1.448728 / 01-01 00:00:01.439][5] fusb252 vendor:fusb252: /OE(0), SEL(1), current flag is "SBU Moisture Detecting"
1947<6>[    1.449555 / 01-01 00:00:01.439][5] fusb252 vendor:fusb252: /OE(0), SEL(0), current flag is "AUX"
1948<7>[    1.449560 / 01-01 00:00:01.439][5] lgmd18 vendor:lge,lgmd18: lgmd18_read_raw: chan(0), 1020698
1949<6>[    1.600362 / 01-01 00:00:01.599][5] FG: calculate_battery_temperature: not ready icoeff. raw temp=350
1950<0>[    1.600461 / 01-01 00:00:01.599][5] drv probe : 1357 spmi-temp-alarm 242
1951<3>[    1.602546 / 01-01 00:00:01.599][5] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
1952<3>[    1.602745 / 01-01 00:00:01.599][5] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a704000
1953<3>[    1.602749 / 01-01 00:00:01.599][5] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a704000
1954<3>[    1.602753 / 01-01 00:00:01.599][5] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a704000
1955<3>[    1.602756 / 01-01 00:00:01.599][5] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a704000
1956<3>[    1.602760 / 01-01 00:00:01.599][5] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a704000
1957<6>[    1.602763 / 01-01 00:00:01.599][5] sps:BAM 0x000000000a704000 is registered.
1958<3>[    1.602879 / 01-01 00:00:01.599][5] register_client_adhoc:find path.src 61 dest 512
1959<3>[    1.603021 / 01-01 00:00:01.599][5] register_client_adhoc:find path.src 61 dest 676
1960<3>[    1.603102 / 01-01 00:00:01.599][5] register_client_adhoc:find path.src 1 dest 583
1961<3>[    1.603190 / 01-01 00:00:01.599][5] register_client_adhoc:Client handle 39 usb0
1962<6>[    1.603273 / 01-01 00:00:01.599][5] msm-dwc3 a600000.ssusb: charger detection in progress
1963<5>[    1.604688 / 01-01 00:00:01.599][0] Registered cp15_barrier emulation handler
1964<5>[    1.604719 / 01-01 00:00:01.599][0] Registered setend emulation handler
1965<6>[    1.604748 / 01-01 00:00:01.599][0] core_ctl: Creating CPU group 0
1966<6>[    1.604756 / 01-01 00:00:01.599][0] core_ctl: Init CPU0 state
1967<6>[    1.604764 / 01-01 00:00:01.599][0] core_ctl: Init CPU1 state
1968<6>[    1.604770 / 01-01 00:00:01.599][0] core_ctl: Init CPU2 state
1969<6>[    1.604779 / 01-01 00:00:01.599][0] core_ctl: Init CPU3 state
1970<6>[    1.604913 / 01-01 00:00:01.599][1] core_ctl: Creating CPU group 4
1971<6>[    1.604922 / 01-01 00:00:01.599][1] core_ctl: Init CPU4 state
1972<6>[    1.604929 / 01-01 00:00:01.599][1] core_ctl: Init CPU5 state
1973<6>[    1.604938 / 01-01 00:00:01.599][1] core_ctl: Init CPU6 state
1974<6>[    1.604946 / 01-01 00:00:01.599][1] core_ctl: Init CPU7 state
1975<6>[    1.605256 / 01-01 00:00:01.599][0] registered taskstats version 1
1976<5>[    1.605277 / 01-01 00:00:01.599][0] Loading compiled-in X.509 certificates
1977<5>[    1.610682 / 01-01 00:00:01.609][0] Loaded X.509 cert 'Build time autogenerated kernel key: 21ed1f63ca9d7ae756f9fe69907c47da5eb3a348'
1978<5>[    1.616456 / 01-01 00:00:01.609][0] Key type encrypted registered
1979<6>[    1.669740 / 01-01 00:00:01.659][5] spss_utils [spss_init]: spss-utils driver Ver 2.0 30-Mar-2017.
1980<6>[    1.670054 / 01-01 00:00:01.669][5] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
1981<6>[    1.670785 / 01-01 00:00:01.669][4] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1982<3>[    1.670968 / 01-01 00:00:01.669][4] prm_log: Enable_mask = 0xf, Init_mask = 0xf
1983<3>[    1.670972 / 01-01 00:00:01.669][4] prm_log: Get display encoder fail, -19
1984<3>[    1.670976 / 01-01 00:00:01.669][4] prm_log: vfps init failed, -517
1985<3>[    1.670996 / 01-01 00:00:01.669][4] prm_log: LGE SBEN probe done
1986<3>[    1.671011 / 01-01 00:00:01.669][4] prm_log: LGE INTM probe done
1987<3>[    1.671015 / 01-01 00:00:01.669][4] prm_log: LGE FBCN probe done
1988<4>[    1.671138 / 01-01 00:00:01.669][4] CHRDEV "triton:io" major number 218 goes below the dynamic allocation range
1989<3>[    1.671162 / 01-01 00:00:01.669][4] prm_log: LGE TRITON probe done
1990<3>[    1.671166 / 01-01 00:00:01.669][4] prm_log: LGE PRM probe deferred, 0xf, 0x1
1991<6>[    1.673160 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 31
1992<6>[    1.673646 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 32
1993<6>[    1.673948 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 33
1994<6>[    1.674232 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 34
1995<6>[    1.674508 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 35
1996<6>[    1.674779 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 36
1997<6>[    1.675046 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 37
1998<6>[    1.675313 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 38
1999<6>[    1.675579 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 39
2000<6>[    1.676302 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 40
2001<4>[    1.676376 / 01-01 00:00:01.669][4] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
2002<6>[    1.676404 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 41
2003<6>[    1.676662 / 01-01 00:00:01.669][4] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 42
2004<4>[    1.677173 / 01-01 00:00:01.669][4] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
2005<4>[    1.677185 / 01-01 00:00:01.669][4] CHRDEV "adsprpc-smd" major number 217 goes below the dynamic allocation range
2006<3>[    1.677665 / 01-01 00:00:01.669][4] register_client_adhoc:find path.src 1 dest 590
2007<3>[    1.677777 / 01-01 00:00:01.669][4] register_client_adhoc:Client handle 40 mdss_reg
2008<3>[    1.677795 / 01-01 00:00:01.669][4] register_client_adhoc:find path.src 22 dest 512
2009<3>[    1.677887 / 01-01 00:00:01.669][4] register_client_adhoc:find path.src 23 dest 512
2010<3>[    1.677968 / 01-01 00:00:01.669][4] register_client_adhoc:Client handle 41 mdss_sde
2011<6>[    1.678034 / 01-01 00:00:01.669][4] [drm:sde_dbg_init:3470] evtlog_status: enable:7, panic:1, dump:1
2012<6>[    1.678047 / 01-01 00:00:01.669][4] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
2013<6>[    1.678055 / 01-01 00:00:01.669][4] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
2014<6>[    1.678077 / 01-01 00:00:01.669][4] msm_drm ae00000.qcom,mdss_mdp: bound ae90000.qcom,dp_display (ops dp_display_comp_ops)
2015<6>[    1.678305 / 01-01 00:00:01.669][4] [Display][msm-dsi-display:dsi_display_bind:4887] Successfully bind display panel 'dsi_sw49410_rev1_dsc_1440_3120_cmd_display'
2016<6>[    1.678430 / 01-01 00:00:01.669][4] [Display][lge-dsi-panel:lge_dsi_panel_drv_post_init:1519] bl control variable init
2017<6>[    1.678438 / 01-01 00:00:01.669][4] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display@20 (ops dsi_display_comp_ops)
2018<6>[    1.678459 / 01-01 00:00:01.669][4] [drm] mapped mdp address space @ffffff8011d00000
2019<3>[    1.678482 / 01-01 00:00:01.669][4] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
2020<6>[    1.678502 / 01-01 00:00:01.669][4] [drm:_sde_kms_get_splash_data:3188] found continuous splash base address:9d400000 size:2400000
2021<6>[    1.679597 / 01-01 00:00:01.669][4] [drm:sde_kms_hw_init:3310] sde hardware revision:0x40000001
2022<6>[    1.680073 / 01-01 00:00:01.679][4] [drm] Created domain mdp_ns [80000000,80000000] secure=0
2023<6>[    1.681183 / 01-01 00:00:01.679][4] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 43
2024<6>[    1.681252 / 01-01 00:00:01.679][4] [drm] probing device qcom,smmu_sde_sec
2025<6>[    1.681257 / 01-01 00:00:01.679][4] [drm] Created domain mdp_s [80000000,80000000] secure=1
2026<4>[    1.682633 / 01-01 00:00:01.679][4] [drm] invalid feature map 9 for feature 10
2027<4>[    1.682679 / 01-01 00:00:01.679][4] [drm] invalid feature map 9 for feature 10
2028<4>[    1.682734 / 01-01 00:00:01.679][4] [drm] invalid feature map 9 for feature 10
2029<4>[    1.682784 / 01-01 00:00:01.679][4] [drm] invalid feature map 9 for feature 10
2030<3>[    1.685237 / 01-01 00:00:01.679][4] i2c i2c-5: of_i2c: modalias failure on /soc/qcom,dp_display@0/qcom,ctrl-supply-entries
2031<4>[    1.685242 / 01-01 00:00:01.679][4] i2c i2c-5: Failed to create I2C device for /soc/qcom,dp_display@0/qcom,ctrl-supply-entries
2032<3>[    1.685247 / 01-01 00:00:01.679][4] i2c i2c-5: of_i2c: modalias failure on /soc/qcom,dp_display@0/qcom,phy-supply-entries
2033<4>[    1.685252 / 01-01 00:00:01.679][4] i2c i2c-5: Failed to create I2C device for /soc/qcom,dp_display@0/qcom,phy-supply-entries
2034<3>[    1.685256 / 01-01 00:00:01.679][4] i2c i2c-5: of_i2c: modalias failure on /soc/qcom,dp_display@0/qcom,core-supply-entries
2035<4>[    1.685260 / 01-01 00:00:01.679][4] i2c i2c-5: Failed to create I2C device for /soc/qcom,dp_display@0/qcom,core-supply-entries
2036<3>[    1.685449 / 01-01 00:00:01.679][4] msm_ext_disp_get_intf_data: Display not found (EXT_DISPLAY_TYPE_DP)
2037<7>[    1.685454 / 01-01 00:00:01.679][4] msm_ext_disp_add_intf_data: Added new display (EXT_DISPLAY_TYPE_DP)
2038<7>[    1.685457 / 01-01 00:00:01.679][4] msm_ext_disp_register_intf: EXT_DISPLAY_TYPE_DP registered
2039<7>[    1.685609 / 01-01 00:00:01.679][4] [drm-dp] dp_display_initialize_hdcp: HDCP 1.3 initialized
2040<7>[    1.685776 / 01-01 00:00:01.679][4] [drm-dp] dp_display_initialize_hdcp: HDCP 2.2 initialized
2041<7>[    1.685779 / 01-01 00:00:01.679][4] [drm-dp] dp_display_post_init: success
2042<6>[    1.686713 / 01-01 00:00:01.679][4] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
2043<6>[    1.686717 / 01-01 00:00:01.679][4] [drm] No driver support for vblank timestamp query.
2044<3>[    1.687131 / 01-01 00:00:01.679][4] prm_log: display set encoder to vfps module
2045<6>[    1.687255 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_topology:2571] default topology: lm: 2 comp_enc:2 intf: 1
2046<6>[    1.687301 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_partial_update_caps:2676] partial update num_rois=1 enabled=1
2047<6>[    1.687306 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_roi_alignment:2624] roi alignment: [1440, 1440, 60, 60, 1440, 60]
2048<6>[    1.687322 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_topology:2571] default topology: lm: 2 comp_enc:2 intf: 1
2049<6>[    1.687360 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_partial_update_caps:2676] partial update num_rois=1 enabled=1
2050<6>[    1.687364 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_roi_alignment:2624] roi alignment: [1080, 1080, 60, 60, 1080, 60]
2051<6>[    1.687378 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_topology:2571] default topology: lm: 2 comp_enc:2 intf: 1
2052<6>[    1.687412 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_partial_update_caps:2676] partial update num_rois=1 enabled=1
2053<6>[    1.687417 / 01-01 00:00:01.679][4] [Display][msm-dsi-panel:dsi_panel_parse_roi_alignment:2624] roi alignment: [720, 720, 60, 60, 720, 60]
2054<6>[    1.687466 / 01-01 00:00:01.679][4] [Display][msm-dsi-display:dsi_display_cont_splash_config:4384] Continuous splash is enabled
2055<6>[    1.687487 / 01-01 00:00:01.679][4] [Display][dsi-ctrl:_dsi_ctrl_setup_isr:2406] [DSI_0] IRQ 1015 registered
2056<0>[    1.710184 / 01-01 00:00:01.709][4] drv probe : 1677 msm-dp-display 32
2057<3>[    1.710715 / 01-01 00:00:01.709][4] register_client_adhoc:find path.src 1 dest 590
2058<3>[    1.710828 / 01-01 00:00:01.709][4] register_client_adhoc:Client handle 42 sde_reg
2059<6>[    1.710879 / 01-01 00:00:01.709][4] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 44
2060<6>[    1.710948 / 01-01 00:00:01.709][4] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
2061<6>[    1.710980 / 01-01 00:00:01.709][4] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 45
2062<6>[    1.711023 / 01-01 00:00:01.709][4] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
2063<3>[    1.711067 / 01-01 00:00:01.709][4] register_client_adhoc:find path.src 25 dest 512
2064<3>[    1.711158 / 01-01 00:00:01.709][4] register_client_adhoc:Client handle 43 mdss_rotator
2065<3>[    1.711166 / 01-01 00:00:01.709][4] register_client_adhoc:find path.src 1 dest 590
2066<3>[    1.711248 / 01-01 00:00:01.709][4] register_client_adhoc:Client handle 44 mdss_rot_reg
2067<3>[    1.711655 / 01-01 00:00:01.709][4] No change in context(0==0), skip
2068<6>[    1.713071 / 01-01 00:00:01.709][4] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
2069<6>[    1.714216 / 01-01 00:00:01.709][4] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
2070<3>[    1.714547 / 01-01 00:00:01.709][4] prm_log: Enable_mask = 0xf, Init_mask = 0x1
2071<3>[    1.714551 / 01-01 00:00:01.709][4] prm_log: Encoder name = DSI-25
2072<3>[    1.714571 / 01-01 00:00:01.709][4] prm_log: LGE VFPS probe done
2073<3>[    1.714575 / 01-01 00:00:01.709][4] prm_log: sben init already done
2074<3>[    1.714579 / 01-01 00:00:01.709][4] prm_log: fbcn init already done
2075<3>[    1.714582 / 01-01 00:00:01.709][4] prm_log: triton init already done
2076<3>[    1.714585 / 01-01 00:00:01.709][4] prm_log: LGE PRM probe done
2077<3>[    1.714897 / 01-01 00:00:01.709][4] ngd_msm_ctrl 171c0000.slim: error creating ipc_logging context
2078<6>[    1.714943 / 01-01 00:00:01.709][4] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 46
2079<4>[    1.715309 / 01-01 00:00:01.709][4] irq: no irq domain found for /soc/wcd9xxx-irq !
2080<3>[    1.715852 / 01-01 00:00:01.709][4] ngd_msm_ctrl 17240000.slim: error creating ipc_logging context
2081<6>[    1.715908 / 01-01 00:00:01.709][4] iommu: Adding device 17240000.slim:qcom,iommu_slim_ctrl_cb to group 47
2082<6>[    1.717326 / 01-01 00:00:01.709][4] hallic_check_hydra_name hydra_name = 1
2083<6>[    1.717342 / 01-01 00:00:01.709][4] hallic_check_hydra_name hydra_name = 1
2084<6>[    1.717347 / 01-01 00:00:01.709][4] hallic_check_hydra_name hydra_name = 1
2085<6>[    1.717352 / 01-01 00:00:01.709][4] hallic_check_hydra_name hydra_name = 1
2086<3>[    1.717672 / 01-01 00:00:01.709][4] smart_cover_dev switch registration success
2087<3>[    1.718022 / 01-01 00:00:01.709][4] hallic_dev switch registration success
2088<6>[    1.718158 / 01-01 00:00:01.709][4] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input7
2089<6>[    1.718514 / 09-14 01:27:30.500][4] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 2017-09-14 01:27:30 UTC (1505352450)
2090<6>[    1.719057 / 09-14 01:27:30.500][4] [bm] Probe done
2091<3>[    1.719332 / 09-14 01:27:30.500][4] gpio_keys_gpio_report_event: discard wrong smart_cover irq OPEN 
2092<3>[    1.719360 / 09-14 01:27:30.500][4] gpio_keys_gpio_report_event: discard wrong nfc_cover irq OPEN 
2093<6>[    1.719509 / 09-14 01:27:30.500][4] lpm_levels_of: idx 1 7100
2094<6>[    1.719513 / 09-14 01:27:30.500][4] lpm_levels_of: idx 2 5989
2095<6>[    1.719518 / 09-14 01:27:30.500][4] lpm_levels_of: idx 2 3933
2096<6>[    1.719557 / 09-14 01:27:30.500][4] lpm_levels_of: idx 1 1744
2097<6>[    1.719560 / 09-14 01:27:30.500][4] lpm_levels_of: idx 2 1000
2098<3>[    1.719564 / 09-14 01:27:30.500][4] lpm_levels_of: Residency < 0 for LPM
2099<6>[    1.719568 / 09-14 01:27:30.500][4] lpm_levels_of: idx 2 1000
2100<3>[    1.719658 / 09-14 01:27:30.500][4] lpm_levels: register_cluster_lpm_stats()
2101<3>[    1.719731 / 09-14 01:27:30.500][4] lpm_levels: register_cluster_lpm_stats()
2102<6>[    1.722506 / 09-14 01:27:30.500][4] rmnet_ipa3 started initialization
2103<6>[    1.722814 / 09-14 01:27:30.500][4] RNDIS_IPA module is loaded.
2104<3>[    1.724346 / 09-14 01:27:30.500][4] msm_bus_late_init: Remove handoff bw requests
2105<6>[    1.725082 / 09-14 01:27:30.500][4] ufs_card_gdsc: disabling
2106<6>[    1.725146 / 09-14 01:27:30.500][4] camera_rear_avdd_ldo: disabling
2107<6>[    1.725155 / 09-14 01:27:30.500][4] camera_rear_dvdd_ldo: disabling
2108<6>[    1.725158 / 09-14 01:27:30.500][4] camera_wide_dvdd_ldo: disabling
2109<6>[    1.725162 / 09-14 01:27:30.500][4] camera_wide_avdd_ldo: disabling
2110<6>[    1.725166 / 09-14 01:27:30.500][4] camera_wide_iovdd_ldo: disabling
2111<6>[    1.725169 / 09-14 01:27:30.500][4] camera_front_dvdd_ldo: disabling
2112<6>[    1.725173 / 09-14 01:27:30.500][4] ois_regulator: disabling
2113<6>[    1.725177 / 09-14 01:27:30.500][4] ois2_regulator: disabling
2114<6>[    1.725180 / 09-14 01:27:30.500][4] ext_5v_boost: disabling
2115<6>[    1.725184 / 09-14 01:27:30.500][4] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
2116<6>[    1.725342 / 09-14 01:27:30.500][4] ALSA device list:
2117<6>[    1.725346 / 09-14 01:27:30.500][4]   No soundcards found.
2118<6>[    1.725392 / 09-14 01:27:30.500][4] msm_geni_serial_cons_pm: change pm : 3 to 0  
2119<6>[    1.728840 / 09-14 01:27:30.500][4] Freeing unused kernel memory: 6144K
2120<14>[    1.730149 / 09-14 01:27:30.509][4] init: init first stage started!
2121<14>[    1.730161 / 09-14 01:27:30.509][4] init: First stage mount skipped (recovery mode)
2122<14>[    1.730470 / 09-14 01:27:30.509][4] init: [libfs_mgr]Error finding 'slot' in device tree
2123<14>[    1.730587 / 09-14 01:27:30.509][4] init: [libfs_mgr]Error finding 'slot' in device tree
2124<14>[    1.731570 / 09-14 01:27:30.509][4] init: Coldboot took 0.000255105 seconds
2125<6>[    1.800583 / 09-14 01:27:30.579][4] FG: calculate_battery_temperature: not ready icoeff. raw temp=350
2126<6>[    1.800819 / 09-14 01:27:30.579][4] FG: extension_battery_cycle: Battery cycle : 177 (= 1417 / 8)
2127<6>[    1.801402 / 09-14 01:27:30.579][4] FG: calculate_battery_temperature: not ready icoeff. raw temp=350
2128<6>[    1.803103 / 09-14 01:27:30.579][4] FG: extension_battery_cycle: Battery cycle : 177 (= 1417 / 8)
2129<6>[    1.810075 / 09-14 01:27:30.589][5] FG_BATT_MISS_IRQ: effective vote is now 1 voted by fg_batt_miss_irq,0
2130<6>[    1.810479 / 09-14 01:27:30.589][5] of_batterydata_get_best_profile: LGE_BLT39_Tocad_3000mAh found
2131<3>[    1.810485 / 09-14 01:27:30.589][5] UNINODE: battery_valid_store: Storing 1
2132<6>[    1.810497 / 09-14 01:27:30.589][5] FG: override_fg_parse_for_battery_charactistics: Wrote [battery charactistics: cutoff=(3200mV, 200mA), cutoff_lt=(3300mV, 100mA), esr_tight_lt_filter=30000, esr_broad_lt_filter=30000]
2133<6>[    1.811361 / 09-14 01:27:30.589][5] FG: is_profile_load_required: Battery profile is same, not loading it
2134<6>[    1.812424 / 09-14 01:27:30.589][5] FG: fg_save_learned_cap_to_sram: learned capacity 2838000uah/2838mah stored
2135<6>[    1.812429 / 09-14 01:27:30.589][5] FG: fg_load_learned_cap_from_sram: learned_cc_uah:2838000 nom_cap_uah: 2987000
2136<6>[    1.812435 / 09-14 01:27:30.589][5] FV: effective vote is now 4400000 voted by BATT_PROFILE_VOTER,0
2137<6>[    1.812455 / 09-14 01:27:30.589][5] FCC: effective vote is now 2800000 voted by BATT_PROFILE_VOTER,0
2138<6>[    1.812654 / 09-14 01:27:30.589][5] FG: extension_fg_load_icoeff_dt: ICOEFF is overridden to 60 for LGE_BLT39_Tocad_3000mAh
2139<6>[    1.812747 / 09-14 01:27:30.589][5] FG: calculate_rescaled_soc: fg_rescale: discharging: 87 = min(old=87, new=87)
2140<6>[    1.814677 / 09-14 01:27:30.589][5] FG: override_fg_adjust_ki_coeff_dischg: Wrote [ki_coeff: low=800, med=1500, hi=2200]-[ki curr: lowth=500, highth=1000]-[cutoff: 3200mV, 200mA]-[status: CHG, soc=83, temp=room or relex]
2141<14>[    1.832725 / 09-14 01:27:30.609][4] init: Coldboot took 0.101125 seconds
2142<11>[    1.832961 / 09-14 01:27:30.609][4] init: [libfs_mgr]Unknown hash algorithm: 
2143<11>[    1.832969 / 09-14 01:27:30.609][4] init: [libfs_mgr]Failed to create FsManagerAvbVerifier
2144<11>[    1.832980 / 09-14 01:27:30.609][4] init: Failed to open FsManagerAvbHandle for INIT_AVB_VERSION: File exists
2145<14>[    1.832990 / 09-14 01:27:30.609][4] init: Loading SELinux policy
2146<7>[    1.834078 / 09-14 01:27:30.609][4] SELinux: 4096 avtab hash slots, 11567 rules.
2147<7>[    1.835417 / 09-14 01:27:30.609][4] SELinux: 4096 avtab hash slots, 11567 rules.
2148<7>[    1.835424 / 09-14 01:27:30.609][4] SELinux:  1 users, 2 roles, 1070 types, 0 bools, 1 sens, 1024 cats
2149<7>[    1.835431 / 09-14 01:27:30.609][4] SELinux:  91 classes, 11567 rules
2150<6>[    1.835719 / 09-14 01:27:30.609][4] SELinux:  Permission validate_trans in class security not defined in policy.
2151<6>[    1.835798 / 09-14 01:27:30.609][4] SELinux:  Class bpf not defined in policy.
2152<6>[    1.835802 / 09-14 01:27:30.609][4] SELinux: the above unknown classes and permissions will be denied
2153<7>[    1.835810 / 09-14 01:27:30.609][4] SELinux:  Completing initialization.
2154<7>[    1.835814 / 09-14 01:27:30.609][4] SELinux:  Setting up existing superblocks.
2155<5>[    1.854237 / 09-14 01:27:30.629][4] audit: type=1403 audit(1505352450.629:2): policy loaded auid=4294967295 ses=4294967295
2156<4>[    1.855602 / 09-14 01:27:30.629][4] init: 2 output lines suppressed due to ratelimiting
2157<14>[    1.856103 / 09-14 01:27:30.629][4] init: init second stage started!
2158<14>[    1.857941 / 09-14 01:27:30.629][4] selinux: SELinux: Loaded file_contexts
2159<14>[    1.857941 / 09-14 01:27:30.629][4] 
2160<14>[    1.858084 / 09-14 01:27:30.629][4] selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.
2161<14>[    1.858084 / 09-14 01:27:30.629][4] 
2162<14>[    1.858093 / 09-14 01:27:30.629][4] init: Running restorecon...
2163<14>[    1.885241 / 09-14 01:27:30.659][4] init: Untracked pid 465 killed by signal 11
2164<14>[    1.885257 / 09-14 01:27:30.659][4] init: Untracked pid 468 killed by signal 11
2165<14>[    1.885271 / 09-14 01:27:30.659][4] init: Untracked pid 473 killed by signal 11
2166<14>[    1.885283 / 09-14 01:27:30.659][4] init: Untracked pid 476 killed by signal 11
2167<14>[    1.885295 / 09-14 01:27:30.659][4] init: Untracked pid 481 killed by signal 11
2168<14>[    1.885309 / 09-14 01:27:30.659][4] init: Untracked pid 484 killed by signal 11
2169<5>[    1.886131 / 09-14 01:27:30.659][4] audit: type=1400 audit(1505352450.659:3): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
2170<14>[    1.887905 / 09-14 01:27:30.659][1] ueventd: ueventd started!
2171<14>[    1.888284 / 09-14 01:27:30.659][1] ueventd: /sys/ rule /sys/devices/platform/trusty.* trusty_version
2172<14>[    1.888305 / 09-14 01:27:30.659][1] ueventd: /sys/ rule /sys/devices/virtual/input/input* enable
2173<14>[    1.888325 / 09-14 01:27:30.659][1] ueventd: /sys/ rule /sys/devices/virtual/input/input* poll_delay
2174<14>[    1.888344 / 09-14 01:27:30.659][1] ueventd: /sys/ rule /sys/devices/virtual/usb_composite/* enable
2175<14>[    1.888367 / 09-14 01:27:30.659][1] ueventd: /sys/ rule /sys/devices/system/cpu/cpu* cpufreq/scaling_max_freq
2176<14>[    1.888386 / 09-14 01:27:30.659][1] ueventd: /sys/ rule /sys/devices/system/cpu/cpu* cpufreq/scaling_min_freq
2177<14>[    1.889841 / 09-14 01:27:30.659][1] selinux: SELinux: Loaded file_contexts
2178<14>[    1.889841 / 09-14 01:27:30.659][1] 
2179<14>[    1.894369 / 09-14 01:27:30.669][1] selinux: SELinux: Loaded file_contexts
2180<14>[    1.894369 / 09-14 01:27:30.669][1] 
2181<6>[    1.920094 / 09-14 01:27:30.699][5] [W/A] CWC) Don't need CWC in workaround_charging_without_cc_required (pd_hard_reset:0, usb_vbus_high:1, typec_mode_none:0, usb_type_unknown:1)
2182<6>[    2.110394 / 09-14 01:27:30.889][0] UEVENT total(24)/reported(17)/skipped(7) : similars(1)
2183<6>[    2.116067 / 09-14 01:27:30.889][1] FG: extension_battery_cycle: Battery cycle : 177 (= 1417 / 8)
2184<6>[    2.160079 / 09-14 01:27:30.939][5] PMI: smblib_icl_change_work: icl_settled=75000
2185<3>[    2.160206 / 09-14 01:27:30.939][5] VENEER: psy_external_changed: externally changed : B:CAPACITY B:VOLTAGE_NOW B:TEMP 
2186<3>[    2.160211 / 09-14 01:27:30.939][5] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 0
2187<3>[    2.160222 / 09-14 01:27:30.939][5] UNINODE: charger_incompatible_store: Storing 0
2188<3>[    2.160227 / 09-14 01:27:30.939][5] VENEER: update_veneer_uninodes: mw_now = 0
2189<3>[    2.160230 / 09-14 01:27:30.939][5] UNINODE: charger_highspeed_store: Storing 0
2190<3>[    2.160235 / 09-14 01:27:30.939][5] UNINODE: charger_name_store: Storing UNKNOWN
2191<14>[    2.318772 / 09-14 01:27:31.089][5] ueventd: Coldboot took 0.428807 seconds
2192<5>[    2.322266 / 09-14 01:27:31.099][0] audit: type=1400 audit(1505352451.099:4): avc:  denied  { setattr } for  pid=1 comm="init" name="system" dev="rootfs" ino=14776 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
2193<5>[    2.324971 / 09-14 01:27:31.099][0] audit: type=1400 audit(1505352451.099:5): avc:  denied  { module_request } for  pid=1 comm="init" kmod="fs-functionfs" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
2194<5>[    2.325129 / 09-14 01:27:31.099][1] audit: type=1400 audit(1505352451.099:6): avc:  denied  { execute } for  pid=547 comm="kworker/u16:1" name="busybox" dev="rootfs" ino=14419 scontext=u:r:kernel:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2195<5>[    2.325230 / 09-14 01:27:31.099][0] audit: type=1400 audit(1505352451.099:7): avc:  denied  { execute_no_trans } for  pid=547 comm="kworker/u16:1" path="/sbin/busybox" dev="rootfs" ino=14419 scontext=u:r:kernel:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2196<5>[    2.334894 / 09-14 01:27:31.109][3] audit: type=1400 audit(1505352451.109:8): avc:  denied  { entrypoint } for  pid=549 comm="init" path="/sbin/logd" dev="rootfs" ino=14604 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2197<5>[    2.335177 / 09-14 01:27:31.109][3] audit: type=1400 audit(1505352451.109:9): avc:  denied  { read execute } for  pid=549 comm="logd" path="/sbin/logd" dev="rootfs" ino=14604 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2198<5>[    2.335991 / 09-14 01:27:31.109][3] audit: type=1400 audit(1505352451.109:10): avc:  denied  { getattr } for  pid=549 comm="logd" path="/sbin/logd" dev="rootfs" ino=14604 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
2199<6>[    2.338247 / 09-14 01:27:31.109][1] Mass Storage Function, version: 2009/09/11
2200<6>[    2.338260 / 09-14 01:27:31.109][1] LUN: removable file: (no medium)
2201<31>[    2.344095 / 09-14 01:27:31.119][2] logd: failed to set AID_LOGD uid
2202<31>[    2.344151 / 09-14 01:27:31.119][2] logd: Cannot read /system/etc/event-log-tags
2203<6>[    2.345003 / 09-14 01:27:31.119][3] file system registered
2204<4>[    2.345230 / 09-14 01:27:31.119][3] CHRDEV "msm_usb_bridge" major number 216 goes below the dynamic allocation range
2205<38>[    2.345480 / 09-14 01:27:31.119][3] logd.auditd: start
2206<46>[    2.345505 / 09-14 01:27:31.119][3] logd.klogd: 2345479530
2207<6>[    2.350209 / 09-14 01:27:31.129][2] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
2208<6>[    2.350825 / 09-14 01:27:31.129][1] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
2209<6>[    2.351129 / 09-14 01:27:31.129][2] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
2210<36>[    2.370902 / 09-14 01:27:31.149][2] type=1400 audit(1505352451.119:207): avc: granted { getattr } for pid=551 comm="recovery" path="/sbin/libc.so" dev="rootfs" ino=14524 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file
2211<36>[    2.371543 / 09-14 01:27:31.149][2] type=1400 audit(1505352451.119:207): avc: granted { getattr } for pid=551 comm="recovery" path="/sbin/libc.so" dev="rootfs" ino=14524 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file
2212<36>[    2.371557 / 09-14 01:27:31.149][2] type=1400 audit(1505352451.119:208): avc: granted { read } for pid=551 comm="recovery" path="/sbin/libc.so" dev="rootfs" ino=14524 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file
2213<36>[    2.371972 / 09-14 01:27:31.149][2] type=1400 audit(1505352451.119:212): avc: granted { read } for pid=551 comm="recovery" path="/sbin/libc.so" dev="rootfs" ino=14524 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file duplicate messages suppressed
2214<36>[    2.371990 / 09-14 01:27:31.149][2] type=1400 audit(1505352451.119:211): avc: granted { getattr } for pid=555 comm="setenforce" path="/sbin" dev="rootfs" ino=14389 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir
2215<36>[    2.372686 / 09-14 01:27:31.149][2] type=1400 audit(1505352451.119:211): avc: granted { getattr } for pid=555 comm="setenforce" path="/sbin" dev="rootfs" ino=14389 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir
2216<6>[    2.373247 / 09-14 01:27:31.149][6] [Display][lge-backlight:lge_backlight_device_update_status:269] brightness = 255, bl_lvl = 2410 -> differed (not allow) lge,blmap
2217<6>[    2.386352 / 09-14 01:27:31.159][6] [Display][lge-backlight:lge_backlight_device_update_status:269] brightness = 255, bl_lvl = 2410 -> differed (not allow) lge,blmap
2218<6>[    2.390943 / 09-14 01:27:31.169][2] adb: ffs_ep0_open
2219<6>[    2.390969 / 09-14 01:27:31.169][2] adb: read descriptors
2220<6>[    2.390984 / 09-14 01:27:31.169][2] adb: read strings
2221<6>[    2.391484 / 09-14 01:27:31.169][1] adb: ffs_epfile_open: ep1
2222<6>[    2.391510 / 09-14 01:27:31.169][1] adb: ffs_epfile_open: ep2
2223<6>[    2.393045 / 09-14 01:27:31.169][3] [drm:sde_connector_schedule_status_work:429] <-- sde_connector_schedule_status_work+0x28/0x2c : check_status work enable
2224<6>[    2.393088 / 09-14 01:27:31.169][3] [Display][dsi-ctrl:dsi_ctrl_host_init:2600] [DSI_0]Host initialization complete, continuous splash status:1
2225<6>[    2.393277 / 09-14 01:27:31.169][3] [Display][lge-drs:lge_drs_mngr_set_freeze_state:452] change state (-1)->(0)
2226<6>[    2.393285 / 09-14 01:27:31.169][3] [Display][msm-dsi-display:dsi_display_splash_res_cleanup:4482] Continuous splash is done
2227<6>[    2.393757 / 09-14 01:27:31.169][3] [Touch] LCD_EVENT_LCD_MODE!
2228<6>[    2.393766 / 09-14 01:27:31.169][3] [Touch] lcd_mode: 3 (prev: 3)
2229<4>[    2.393796 / 09-14 01:27:31.169][3] [gf][info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback val=[0], blank=[0]
2230<6>[    2.393809 / 09-14 01:27:31.169][3] [Display][lge-dsi-panel:lge_dsi_panel_mode_set:1067] backup=1, mode_set=0
2231<6>[    2.393820 / 09-14 01:27:31.169][3] [Display][sw49410_rev1-ops:lge_set_screen_mode_sw49410_rev1:595] screen_mode : 0, adv_mp_mode : 8
2232<6>[    2.393896 / 09-14 01:27:31.169][3] [Touch] touch_resume Start
2233<6>[    2.393903 / 09-14 01:27:31.169][3] [Touch] touch_resume End
2234<6>[    2.393912 / 09-14 01:27:31.169][3] [Touch] touch_ic_init Start
2235<6>[    2.393920 / 09-14 01:27:31.169][3] [Touch] sw49410_init: charger_state = 0x01
2236<6>[    2.394404 / 09-14 01:27:31.169][2] [Display][sw49410_rev1-ops:lge_set_rgb_tune_send_sw49410_rev1:374] [0xf5:0x00][0xf6:0x40:512][0xf7:0x40:512][0xf8:0x40:512]
2237<6>[    2.394629 / 09-14 01:27:31.169][2] [Display][sw49410_rev1-ops:lge_set_screen_tune_send_sw49410_rev1:435] [0xf3:0x00:0x0d][0xf4:0x00:0x40:0x00]
2238<6>[    2.394755 / 09-14 01:27:31.169][2] [Display][sw49410_rev1-ops:mplus_mode_send_sw49410_rev1:532] mp mode : 12  mp mode set : 35
2239<6>[    2.394766 / 09-14 01:27:31.169][2] [Display][lge-mplus:lge_mplus_backlight_dimming:437] skip brightness dimming
2240<6>[    2.394775 / 09-14 01:27:31.169][2] [Display][sw49410_rev1-ops:mplus_mode_send_sw49410_rev1:552] [mp_hd:8][hdr:0][hl:0][max:8][mp_adv:8][mp:8][gc:0][sc_tun:0][shap:0]
2241<6>[    2.394798 / 09-14 01:27:31.169][2] [Display] qpnp_set_fsc wled->fs_curr_ua : 20000, data : 20000
2242<6>[    2.394845 / 09-14 01:27:31.169][2] [Display][lge-backlight:lge_update_backlight:182] <--dsi_display_post_kickoff+0xe0/0x15c unset=2410
2243<6>[    2.395637 / 09-14 01:27:31.169][3] [Touch] version : v1.07, chip : 17, protocol : 4
2244<6>[    2.395637 / 09-14 01:27:31.169][3] [Touch] chip_rev : 1, fpc : 1, lcm : 1, lot : 1
2245<6>[    2.395637 / 09-14 01:27:31.169][3] [Touch] product id : L0W60NEO
2246<6>[    2.395637 / 09-14 01:27:31.169][3] [Touch] flash boot : idle, done, crc : ok
2247<6>[    2.395661 / 09-14 01:27:31.169][3] [Touch] date : 2018.09.17 07:08:41 Site1
2248<6>[    2.396431 / 09-14 01:27:31.169][1] [Touch] sw49410_setup_q_sensitivity : NORMAL(0)
2249<6>[    2.396440 / 09-14 01:27:31.169][1] [Touch] resume ts->lpwg.screen on
2250<6>[    2.396448 / 09-14 01:27:31.169][1] [Touch] sw49410_tci_control: type= 0
2251<6>[    2.396690 / 09-14 01:27:31.169][3] [Touch] sw49410_lpwg_control mode = 0
2252<6>[    2.424366 / 09-14 01:27:31.199][6] [Display][lge-backlight:lge_backlight_device_update_status:265] BR:255 BL:2410 lge,blmap
2253<6>[    2.430060 / 09-14 01:27:31.209][3] [Touch] sw49410_tc_driving = 0x0003, 0x181
2254<6>[    2.430300 / 09-14 01:27:31.209][0] [Touch] DDI Display Mode = 0x00000003
2255<6>[    2.430416 / 09-14 01:27:31.209][0] [Touch] touch_ic_init End
2256<6>[    2.444712 / 09-14 01:27:31.219][1] PMI: smblib_update_usb_type: APSD=SDP PD=0
2257<6>[    2.444728 / 09-14 01:27:31.219][1] USB_ICL: effective vote is now 100000 voted by USB_PSY_VOTER,5
2258<3>[    2.444782 / 09-14 01:27:31.219][1] PMI: set_sdp_current: ICL 50000uA isn't supported for SDP
2259<3>[    2.444790 / 09-14 01:27:31.219][1] PMI: smblib_set_icl_current: Couldn't set SDP ICL rc=-22
2260<6>[    2.444876 / 09-14 01:27:31.219][1] PD_DISALLOWED_INDIRECT: effective vote is now 0 voted by HVDCP_TIMEOUT_VOTER,1
2261<6>[    2.444885 / 09-14 01:27:31.219][1] PD_ALLOWED: effective vote is now 1 voted by PD_DISALLOWED_INDIRECT_VOTER,0
2262<6>[    2.444891 / 09-14 01:27:31.219][1] PMI: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP detected
2263<6>[    2.444923 / 09-14 01:27:31.219][1] PMI: smblib_handle_hvdcp_check_timeout: IRQ: smblib_handle_hvdcp_check_timeout falling
2264<6>[    2.444930 / 09-14 01:27:31.219][1] PMI: smblib_handle_sdp_enumeration_done: IRQ: sdp-enumeration-done falling
2265<6>[    2.444937 / 09-14 01:27:31.219][1] PMI: smblib_handle_slow_plugin_timeout: IRQ: slow-plugin-timeout falling
2266<6>[    2.444973 / 09-14 01:27:31.219][1] [W/A] FDR) pstype=4, running=0, ready=0
2267<6>[    2.444980 / 09-14 01:27:31.219][1] [W/A] FDR) Being ready to check runtime floating
2268<6>[    2.445235 / 09-14 01:27:31.219][1] USB-ID: Success to get qpnp-vadc
2269<6>[    2.445247 / 09-14 01:27:31.219][1] USB-ID: Success to get usbid-adc-channel: 14
2270<6>[    2.445640 / 09-14 01:27:31.219][1] usbpd usbpd0: typec mode:TYPEC_SOURCE_DEFAULT(Rp56k) present:1 type:4 orientation:1
2271<6>[    2.445650 / 09-14 01:27:31.219][1] usbpd usbpd0: Type-C Source (default) connected
2272<6>[    2.445687 / 09-14 01:27:31.219][1] usbpd usbpd0: handle state UNKNOWN
2273<6>[    2.445786 / 09-14 01:27:31.219][0] msm-dwc3 a600000.ssusb: (null) state
2274<6>[    2.449690 / 09-14 01:27:31.219][1] FG: override_fg_adjust_ki_coeff_dischg: Wrote [ki_coeff: low=800, med=1500, hi=2200]-[ki curr: lowth=500, highth=1000]-[cutoff: 3200mV, 200mA]-[status: CHG, soc=83, temp=room or relex]
2275<3>[    2.450070 / 09-14 01:27:31.229][0] msm-usb-ssphy-qmp 88e8000.ssphy: USB DP QMP PHY: Update TYPEC CTRL(2)
2276<6>[    2.451500 / 09-14 01:27:31.229][0] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
2277<6>[    2.451524 / 09-14 01:27:31.229][0] msm-dwc3 a600000.ssusb: dwc3_otg_start_peripheral: turn on gadget dwc3-gadget
2278<6>[    2.452825 / 09-14 01:27:31.229][0] msm-dwc3 a600000.ssusb: b_peripheral state
2279<6>[    2.488732 / 09-14 01:27:31.259][7] EXT4-fs (sda26): mounted filesystem with ordered data mode. Opts: 
2280<6>[    2.499387 / 09-14 01:27:31.269][7] EXT4-fs (sda26): mounted filesystem with ordered data mode. Opts: 
2281<6>[    2.512679 / 09-14 01:27:31.289][6] EXT4-fs (sda26): mounted filesystem with ordered data mode. Opts: 
2282<3>[    2.542010 / 09-14 01:27:31.319][6] EXT4-fs (sda22): VFS: Can't find ext4 filesystem
2283<3>[    2.542238 / 09-14 01:27:31.319][6] EXT4-fs (sda22): VFS: Can't find ext4 filesystem
2284<6>[    2.545297 / 09-14 01:27:31.319][1] fusb252 vendor:fusb252: /OE(0), SEL(1), current flag is "Factory Cable ID"
2285<6>[    2.546187 / 09-14 01:27:31.319][1] fusb252 vendor:fusb252: /OE(0), SEL(0), current flag is "AUX"
2286<6>[    2.546202 / 09-14 01:27:31.319][1] USB-ID: Success to get pullup-mvol:1000
2287<6>[    2.546210 / 09-14 01:27:31.319][1] USB-ID: Success to get pullup-kohm:200
2288<6>[    2.546218 / 09-14 01:27:31.319][1] USB-ID: Success to get adc-range:30%
2289<6>[    2.546225 / 09-14 01:27:31.319][1] USB-ID: Updated to 1021mvol => 199800kohm => OPEN
2290<3>[    2.546241 / 09-14 01:27:31.319][1] VENEER: psy_external_changed: externally changed : U:REAL_TYPE 
2291<3>[    2.546251 / 09-14 01:27:31.319][1] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 4
2292<3>[    2.546268 / 09-14 01:27:31.319][1] VENEER: update_veneer_supplier: Charger is changed to USB2
2293<3>[    2.546277 / 09-14 01:27:31.319][1] UNINODE: charger_incompatible_store: Storing 0
2294<3>[    2.546289 / 09-14 01:27:31.319][1] VENEER: update_veneer_uninodes: mw_now = 500
2295<3>[    2.546296 / 09-14 01:27:31.319][1] UNINODE: charger_highspeed_store: Storing 0
2296<3>[    2.546304 / 09-14 01:27:31.319][1] UNINODE: charger_name_store: Storing USB2
2297<6>[    2.546317 / 09-14 01:27:31.319][1] VOTER: atomic_voter_callback: iusb : Voter CHARGER effected (500)
2298<6>[    2.546337 / 09-14 01:27:31.319][1] Releasing USB_PSY_VOTER
2299<6>[    2.546345 / 09-14 01:27:31.319][1] USB_ICL: effective vote is now 500000 voted by USB_PSY_VOTER,5
2300<3>[    2.546401 / 09-14 01:27:31.319][1] PMI: set_sdp_current: ICL 50000uA isn't supported for SDP
2301<3>[    2.546409 / 09-14 01:27:31.319][1] PMI: smblib_set_icl_current: Couldn't set SDP ICL rc=-22
2302<3>[    2.546508 / 09-14 01:27:31.319][1] CEIL: charging_ceiling_vote: Ceiling for [USB2] : IUSB(500)/IBAT(-1)/IDC(-1)
2303<6>[    2.546516 / 09-14 01:27:31.319][1] CHGTIME: charging_time_update: Charging started, Start sampling
2304<6>[    2.550321 / 09-14 01:27:31.329][6] EXT4-fs (sda20): mounted filesystem without journal. Opts: 
2305<3>[    2.556698 / 09-14 01:27:31.329][6] FAT-fs (sdg1): invalid media value (0x0d)
2306<6>[    2.556704 / 09-14 01:27:31.329][6] FAT-fs (sdg1): Can't find a valid FAT filesystem
2307<3>[    2.556942 / 09-14 01:27:31.329][6] FAT-fs (sdg1): invalid media value (0x0d)
2308<6>[    2.556954 / 09-14 01:27:31.329][6] FAT-fs (sdg1): Can't find a valid FAT filesystem
2309<6>[    2.726804 / 09-14 01:27:31.499][1] PMI: smblib_icl_change_work: icl_settled=500000
2310<3>[    2.726976 / 09-14 01:27:31.499][1] VENEER: psy_external_changed: externally changed : B:TEMP 
2311<3>[    2.726988 / 09-14 01:27:31.499][1] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 4
2312<3>[    2.727009 / 09-14 01:27:31.499][1] UNINODE: charger_incompatible_store: Storing 0
2313<3>[    2.727020 / 09-14 01:27:31.499][1] VENEER: update_veneer_uninodes: mw_now = 2500
2314<3>[    2.727027 / 09-14 01:27:31.499][1] UNINODE: charger_highspeed_store: Storing 0
2315<3>[    2.727035 / 09-14 01:27:31.499][1] UNINODE: charger_name_store: Storing USB2
2316<6>[    2.946208 / 09-14 01:27:31.719][1] usbpd usbpd0: handle state SNK_Wait_for_Capabilities
2317<6>[    2.946266 / 09-14 01:27:31.719][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2318<6>[    2.946334 / 09-14 01:27:31.719][1] usbpd usbpd0: handle state SNK_Hard_Reset
2319<6>[    2.946380 / 09-14 01:27:31.719][1] APSD_DISABLE: effective vote is now 1 voted by PD_HARD_RESET_VOTER,0
2320<6>[    2.947115 / 09-14 01:27:31.719][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2321<3>[    3.120582 / 09-14 01:27:31.899][1] VENEER: psy_external_changed: externally changed : B:TEMP 
2322<3>[    3.120603 / 09-14 01:27:31.899][1] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 4
2323<3>[    3.120617 / 09-14 01:27:31.899][1] UNINODE: charger_incompatible_store: Storing 0
2324<3>[    3.120626 / 09-14 01:27:31.899][1] VENEER: update_veneer_uninodes: mw_now = 2500
2325<3>[    3.120633 / 09-14 01:27:31.899][1] UNINODE: charger_highspeed_store: Storing 0
2326<3>[    3.120641 / 09-14 01:27:31.899][1] UNINODE: charger_name_store: Storing USB2
2327<6>[    3.632222 / 09-14 01:27:32.409][1] usbpd usbpd0: handle state SNK_Transition_to_default
2328<3>[    3.753882 / 09-14 01:27:32.529][6] FAT-fs (sdg1): invalid media value (0x0d)
2329<6>[    3.753894 / 09-14 01:27:32.529][6] FAT-fs (sdg1): Can't find a valid FAT filesystem
2330<3>[    3.754140 / 09-14 01:27:32.529][6] FAT-fs (sdg1): invalid media value (0x0d)
2331<6>[    3.754144 / 09-14 01:27:32.529][6] FAT-fs (sdg1): Can't find a valid FAT filesystem
2332<6>[    3.756026 / 09-14 01:27:32.529][6] [Display][lge-backlight:lge_backlight_device_update_status:265] BR:255 BL:2410 lge,blmap
2333<6>[    3.757948 / 09-14 01:27:32.000][0] gadget_dev_desc_bDeviceClass_store: 0x00
2334<6>[    3.757987 / 09-14 01:27:32.000][0] gadget_dev_desc_bDeviceSubClass_store: 0x00
2335<6>[    3.758023 / 09-14 01:27:32.000][0] gadget_dev_desc_bDeviceProtocol_store: 0x00
2336<6>[    3.758245 / 09-14 01:27:32.000][3] adb: ffs_epfile_release: ep2
2337<6>[    3.758258 / 09-14 01:27:32.000][3] adb: ffs_epfile_release: ep1
2338<6>[    3.758297 / 09-14 01:27:32.000][3] adb: ffs_ep0_release
2339<3>[    3.761792 / 09-14 01:27:32.000][6] FAT-fs (sdg1): invalid media value (0x0d)
2340<6>[    3.761798 / 09-14 01:27:32.000][6] FAT-fs (sdg1): Can't find a valid FAT filesystem
2341<3>[    3.762039 / 09-14 01:27:32.000][6] FAT-fs (sdg1): invalid media value (0x0d)
2342<6>[    3.762051 / 09-14 01:27:32.000][6] FAT-fs (sdg1): Can't find a valid FAT filesystem
2343<6>[    4.080098 / 09-14 01:27:32.319][1] CHGTIME: chgtime_dworkf: One more sampling (power:2500mw)
2344<6>[    4.132645 / 09-14 01:27:32.369][1] usbpd usbpd0: handle state SNK_Wait_for_Capabilities
2345<6>[    4.132694 / 09-14 01:27:32.369][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2346<6>[    4.132755 / 09-14 01:27:32.369][1] usbpd usbpd0: handle state SNK_Hard_Reset
2347<3>[    4.133096 / 09-14 01:27:32.369][1] VENEER: psy_external_changed: externally changed : B:VOLTAGE_NOW 
2348<3>[    4.133108 / 09-14 01:27:32.369][1] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 4
2349<3>[    4.133122 / 09-14 01:27:32.369][1] UNINODE: charger_incompatible_store: Storing 0
2350<3>[    4.133133 / 09-14 01:27:32.369][1] VENEER: update_veneer_uninodes: mw_now = 2500
2351<3>[    4.133141 / 09-14 01:27:32.369][1] UNINODE: charger_highspeed_store: Storing 0
2352<3>[    4.133151 / 09-14 01:27:32.369][1] UNINODE: charger_name_store: Storing USB2
2353<6>[    4.133446 / 09-14 01:27:32.369][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2354<6>[    4.559105 / 09-14 01:27:32.799][0] mtp_open
2355<6>[    4.818593 / 09-14 01:27:33.049][1] usbpd usbpd0: handle state SNK_Transition_to_default
2356<6>[    5.271172 / 09-14 01:27:33.509][3] [Touch] 1 finger pressed:<0>( 264,2730,  44)
2357<6>[    5.318968 / 09-14 01:27:33.549][1] usbpd usbpd0: handle state SNK_Wait_for_Capabilities
2358<6>[    5.319017 / 09-14 01:27:33.549][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2359<6>[    5.319077 / 09-14 01:27:33.549][1] usbpd usbpd0: handle state SNK_Hard_Reset
2360<3>[    5.319389 / 09-14 01:27:33.549][1] VENEER: psy_external_changed: externally changed : B:VOLTAGE_NOW 
2361<3>[    5.319400 / 09-14 01:27:33.549][1] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 4
2362<3>[    5.319413 / 09-14 01:27:33.549][1] UNINODE: charger_incompatible_store: Storing 0
2363<3>[    5.319423 / 09-14 01:27:33.549][1] VENEER: update_veneer_uninodes: mw_now = 2500
2364<3>[    5.319430 / 09-14 01:27:33.549][1] UNINODE: charger_highspeed_store: Storing 0
2365<3>[    5.319437 / 09-14 01:27:33.549][1] UNINODE: charger_name_store: Storing USB2
2366<6>[    5.319775 / 09-14 01:27:33.549][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2367<3>[    5.600185 / 09-14 01:27:33.839][1] VENEER: back_charging_time: Building charging time table for 2500mW is done
2368<6>[    5.620993 / 09-14 01:27:33.859][1] CHGTIME: charging_time_remains: rawsoc 213, elapsed -1s...
2369<6>[    6.004887 / 09-14 01:27:34.239][1] usbpd usbpd0: handle state SNK_Transition_to_default
2370<6>[    6.263974 / 09-14 01:27:34.499][0] [Touch]  finger released:<0>( 718,2728,  44)
2371<6>[    6.464558 / 09-14 01:27:34.699][0] [Touch] 1 finger pressed:<0>( 276,2723,  46)
2372<6>[    6.505311 / 09-14 01:27:34.739][1] usbpd usbpd0: handle state SNK_Wait_for_Capabilities
2373<6>[    6.505361 / 09-14 01:27:34.739][1] PMI: smblib_handle_typec_cc_state_change: IRQ: cc-state-change; Type-C SOURCE_DEFAULT detected
2374<6>[    6.505397 / 09-14 01:27:34.739][1] usbpd usbpd0: Sink hard reset count exceeded, disabling PD
2375<6>[    6.505437 / 09-14 01:27:34.739][1] APSD_DISABLE: effective vote is now 0 voted by PD_HARD_RESET_VOTER,0
2376<6>[    6.505531 / 09-14 01:27:34.739][1] PMI: smblib_set_prop_pd_active: update pd active 0 
2377<6>[    6.505556 / 09-14 01:27:34.739][1] USB_IRQ_DISABLE: effective vote is now 0 voted by PD_VOTER,0
2378<6>[    6.505607 / 09-14 01:27:34.739][1] PMI: smblib_update_usb_type: APSD=SDP PD=0
2379<3>[    6.505762 / 09-14 01:27:34.739][1] VENEER: psy_external_changed: externally changed : B:VOLTAGE_NOW 
2380<3>[    6.505773 / 09-14 01:27:34.739][1] VENEER: update_veneer_supplier: POWER_SUPPLY_PROP_REAL_TYPE = 4
2381<3>[    6.505792 / 09-14 01:27:34.739][1] UNINODE: charger_incompatible_store: Storing 0
2382<3>[    6.505802 / 09-14 01:27:34.739][1] VENEER: update_veneer_uninodes: mw_now = 2500
2383<3>[    6.505809 / 09-14 01:27:34.739][1] UNINODE: charger_highspeed_store: Storing 0
2384<3>[    6.505817 / 09-14 01:27:34.739][1] UNINODE: charger_name_store: Storing USB2
2385<6>[    6.680418 / 09-14 01:27:34.919][1] UEVENT total(41)/reported(26)/skipped(15) : similars(2)
2386<6>[    6.797937 / 09-14 01:27:35.029][0] [Touch]  finger released:<0>(1323,2524,  43)
2387<6>[    6.880069 / 09-14 01:27:35.119][5] PL_AWAKE: effective vote is now 0 voted by PL_VOTER,0
2388<14>[    7.386943 / 09-14 01:27:35.619][5] init: starting service 'adbd'...
2389<11>[    7.387264 / 09-14 01:27:35.619][5] init: failed to open /acct/uid_0/pid_602/cgroup.procs: No such file or directory
2390<11>[    7.387283 / 09-14 01:27:35.619][5] init: createProcessGroup(0, 602) failed for service 'adbd': No such file or directory
2391<11>[    7.387326 / 09-14 01:27:35.619][5] init: property_set("ro.boottime.adbd", "7387140413") failed: property already set
2392<14>[    7.387806 / 09-14 01:27:35.619][0] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
2393<6>[    7.390120 / 09-14 01:27:35.629][2] adb: ffs_ep0_open
2394<6>[    7.390145 / 09-14 01:27:35.629][2] adb: read descriptors
2395<6>[    7.390164 / 09-14 01:27:35.629][2] adb: read strings
2396<14>[    7.390359 / 09-14 01:27:35.629][5] init: processing action (sys.usb.config=mtp,adb && sys.usb.ffs.ready=1)
2397<6>[    7.390440 / 09-14 01:27:35.629][5] gadget_dev_desc_idVendor_store: 0x2A70
2398<6>[    7.390454 / 09-14 01:27:35.629][5] gadget_dev_desc_idProduct_store: 0x9011
2399<6>[    7.390511 / 09-14 01:27:35.629][5] config_usb_cfg_link [1:mtp]
2400<6>[    7.390533 / 09-14 01:27:35.629][5] config_usb_cfg_link [1:Function FS Gadget]
2401<38>[    7.390592 / 09-14 01:27:35.629][0] type=1400 audit(1505352455.169:1696): avc: denied { open } for pid=551 comm="recovery" path="/tmp/twadbfifo" dev="tmpfs" ino=16568 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
2402<38>[    7.390607 / 09-14 01:27:35.629][0] type=1400 audit(1505352455.629:1697): avc: denied { create } for pid=1 comm="init" name="f1" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=lnk_file permissive=1
2403<6>[    7.394450 / 09-14 01:27:35.629][5] adb: ffs_epfile_open: ep1
2404<6>[    7.394459 / 09-14 01:27:35.629][5] adb: ffs_epfile_open: ep2
2405<6>[    7.394476 / 09-14 01:27:35.629][5] gadget_dev_desc_UDC_store [a600000.dwc3] VID(0x2A70), PID(0x9011)
2406<6>[    7.660865 / 09-14 01:27:35.899][0] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
2407<6>[    7.660890 / 09-14 01:27:35.899][0] PMI: SDP_CURRENT_MAX 100000 is overridden to 500000
2408<6>[    7.708833 / 09-14 01:27:35.939][0] android_work: sent uevent USB_STATE=CONNECTED
2409<6>[    7.746711 / 09-14 01:27:35.979][0] configfs-gadget gadget: high-speed config #1: b
2410<6>[    7.746873 / 09-14 01:27:35.979][1] mtp_release
2411<6>[    7.746918 / 09-14 01:27:35.979][1] mtp_open
2412<6>[    7.747025 / 09-14 01:27:35.979][0] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
2413<6>[    7.747058 / 09-14 01:27:35.979][0] android_work: sent uevent USB_STATE=CONFIGURED
2414<6>[    8.442840 / 09-14 01:27:36.679][3] [Touch] 1 finger pressed:<0>( 435,2606,  52)
2415<6>[    8.517027 / 09-14 01:27:36.749][3] [Touch]  finger released:<0>( 435,2602,  44)
2416<6>[    9.051783 / 09-14 01:27:37.289][3] [Touch] 1 finger pressed:<0>( 488, 829,  52)
2417<38>[    9.083682 / 09-14 01:27:37.319][0] type=1400 audit(1505352455.629:1697): avc: denied { create } for pid=1 comm="init" name="f1" scontext=u:r:init:s0 tcontext=u:object_r:configfs:s0 tclass=lnk_file permissive=1
2418<36>[    9.083699 / 09-14 01:27:37.319][0] type=1400 audit(1505352457.319:1698): avc: granted { read } for pid=551 comm="recovery" name="temp" dev="sysfs" ino=39743 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file
2419<36>[    9.083801 / 09-14 01:27:37.319][0] type=1400 audit(1505352457.319:1698): avc: granted { read } for pid=551 comm="recovery" name="temp" dev="sysfs" ino=39743 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file
2420<36>[    9.083813 / 09-14 01:27:37.319][0] type=1400 audit(1505352457.319:1699): avc: granted { read open } for pid=551 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=39743 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file
2421<36>[    9.084455 / 09-14 01:27:37.319][0] type=1400 audit(1505352457.319:1699): avc: granted { read open } for pid=551 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=39743 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file
2422<36>[    9.084469 / 09-14 01:27:37.319][0] type=1400 audit(1505352457.319:1700): avc: granted { getattr } for pid=551 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=39743 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file
2423<6>[    9.092748 / 09-14 01:27:37.329][3] [Touch]  finger released:<0>( 489, 831,  43)
2424<6>[    9.619069 / 09-14 01:27:37.849][3] [Touch] 1 finger pressed:<0>( 245, 860,  44)
2425<6>[    9.651852 / 09-14 01:27:37.889][3] [Touch]  finger released:<0>( 245, 855,  42)
2426<6>[   10.080139 / 09-14 01:27:38.319][3] pet_watchdog [enable : 1, jiffies : 4294938304, delay_time : 936]
2427<6>[   10.144728 / 09-14 01:27:38.379][3] [Touch] 1 finger pressed:<0>(  88, 748,  44)
2428<6>[   10.202621 / 09-14 01:27:38.439][3] [Touch]  finger released:<0>(  89, 747,  43)
2429<6>[   10.611978 / 09-14 01:27:38.849][3] [Touch] 1 finger pressed:<0>(  93, 834,  43)
2430<6>[   10.653211 / 09-14 01:27:38.889][3] [Touch]  finger released:<0>(  93, 834,  42)
2431<6>[   11.671971 / 09-14 01:27:39.909][3] [Touch] 1 finger pressed:<0>( 265,2704,  43)
2432<6>[   12.000125 / 09-14 01:27:40.239][4] [bm] Start work
2433<6>[   12.172081 / 09-14 01:27:40.409][3] [Touch]  finger released:<0>(1358,2563,  42)
2434<36>[   12.198247 / 09-14 01:27:40.429][0] type=1400 audit(1505352457.319:1700): avc: granted { getattr } for pid=551 comm="recovery" path="/sys/devices/virtual/thermal/thermal_zone0/temp" dev="sysfs" ino=39743 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file
2435<36>[   12.198263 / 09-14 01:27:40.429][0] type=1400 audit(1505352460.429:1701): avc: granted { getattr } for pid=551 comm="recovery" path="/" dev="rootfs" ino=1 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir
2436<4>[   12.200301 / 09-14 01:27:40.439][2] audit_log_lost: 589 callbacks suppressed
2437<4>[   12.200304 / 09-14 01:27:40.439][2] audit: audit_lost=1610 audit_rate_limit=20 audit_backlog_limit=64
2438<3>[   12.200318 / 09-14 01:27:40.439][2] audit: rate limit exceeded