· 6 years ago · Mar 23, 2020, 07:10 PM
1OnePlus6T:/ # dmesg -w
2[ 0.000000] Booting Linux on physical CPU 0x0
3[ 0.000000] Linux version 4.9.217-Quantum+ (Santiago@MacBook-Pro) (Proton clang version 11.0.0 (git://github.com/llvm/llvm-project d779ee152ceff1fd52b3530014a6b10bbaa2d4b7)) #2 SMP PREEMPT Sun Mar 22 21:23:12 -03 2020
4[ 0.000000] Boot CPU: AArch64 Processor [517f803c]
5[ 0.000000] Machine: Qualcomm Technologies, Inc. SDM845 v2.1 MTP PVT/MP
6[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 16 MiB
7[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
8[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fdc00000, size 16 MiB
9[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
10[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 92 MiB
11[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
12[ 0.000000] Reserved memory: created CMA memory pool at 0x00000001fb000000, size 36 MiB
13[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
14[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7800000, size 8 MiB
15[ 0.000000] OF: reserved mem: initialized node secure_sp_region, compatible id shared-dma-pool
16[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 32 MiB
17[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
18[ 0.000000] Reserved memory: created DMA memory pool at 0x000000008ab00000, size 20 MiB
19[ 0.000000] OF: reserved mem: initialized node qseecom_region@0x8ab00000, compatible id shared-dma-pool
20[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 5 MiB
21[ 0.000000] OF: reserved mem: initialized node camera_region@0x8bf00000, compatible id removed-dma-pool
22[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c400000, size 0 MiB
23[ 0.000000] OF: reserved mem: initialized node ips_fw_region@0x8c400000, compatible id removed-dma-pool
24[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c410000, size 0 MiB
25[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@0x8c410000, compatible id removed-dma-pool
26[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c415000, size 0 MiB
27[ 0.000000] OF: reserved mem: initialized node gpu_region@0x8c415000, compatible id removed-dma-pool
28[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c500000, size 26 MiB
29[ 0.000000] OF: reserved mem: initialized node adsp_region@0x8c500000, compatible id removed-dma-pool
30[ 0.000000] Removed memory: created DMA memory pool at 0x000000008df00000, size 1 MiB
31[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@0x8df00000, compatible id removed-dma-pool
32[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e000000, size 120 MiB
33[ 0.000000] OF: reserved mem: initialized node modem_region@0x8e000000, compatible id removed-dma-pool
34[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095800000, size 5 MiB
35[ 0.000000] OF: reserved mem: initialized node video_region@0x95800000, compatible id removed-dma-pool
36[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095d00000, size 8 MiB
37[ 0.000000] OF: reserved mem: initialized node cdsp_region@0x95d00000, compatible id removed-dma-pool
38[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096500000, size 2 MiB
39[ 0.000000] OF: reserved mem: initialized node mba_region@0x96500000, compatible id removed-dma-pool
40[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096700000, size 20 MiB
41[ 0.000000] OF: reserved mem: initialized node slpi_region@0x96700000, compatible id removed-dma-pool
42[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097b00000, size 1 MiB
43[ 0.000000] OF: reserved mem: initialized node pil_spss_region@0x97b00000, compatible id removed-dma-pool
44[ 0.000000] On node 0 totalpages: 1487433
45[ 0.000000] DMA zone: 7031 pages used for memmap
46[ 0.000000] DMA zone: 0 pages reserved
47[ 0.000000] DMA zone: 449961 pages, LIFO batch:31
48[ 0.000000] Normal zone: 16211 pages used for memmap
49[ 0.000000] Normal zone: 1037472 pages, LIFO batch:31
50[ 0.000000] psci: probing for conduit method from DT.
51[ 0.000000] psci: PSCIv1.1 detected in firmware.
52[ 0.000000] psci: Using standard PSCI v0.2 function IDs
53[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
54[ 0.000000] psci: SMC Calling Convention v1.0
55[ 0.000000] random: fast init done
56[ 0.000000] percpu: Embedded 20 pages/cpu s50968 r0 d30952 u81920
57[ 0.000000] pcpu-alloc: s50968 r0 d30952 u81920 alloc=20*4096
58[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
59[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
60[ 0.000000] spectrev2 mitigation disabled by kernel configuration
61[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1464191
62[ 0.000000] Kernel command line: quiet rcupdate.rcu_normal_after_boot=1 noirqdebug cgroup.memory=nokmem,nosocket androidboot.hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true loop.max_part=7 androidboot.usbcontroller=a600000.dwc3 rootwait ro init=/init buildvariant=user androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 5764704 verity 1 PARTUUID=e1a184f9-e452-c23a-623e-d270bfae35d2 PARTUUID=e1a184f9-e452-c23a-623e-d270bfae35d2 4096 4096 720588 720588 sha1 32057b7c1be4bb2dca65dedf039c19d51eec2fdd 27acdfc9072f32e8e4d3d1bc44040912afcfa407 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=e1a184f9-e452-c23a-623e-d270bfae35d2 fec_roots 2 fec_blocks 726263 fec_start 726263" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=d01018b5-fc99-f318-3c50-e52cf1516e4d androidboot.vbmeta
63[ 0.000000] IRQ lockup detection disabled
64[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
65[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
66[ 0.000000] log_buf_len min size: 262144 bytes
67[ 0.000000] log_buf_len: 2097152 bytes
68[ 0.000000] early log buf free: 255640(97%)
69[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
70[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
71[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
72[ 0.000000] software IO TLB: mapped [mem 0xf5400000-0xf5800000] (4MB)
73[ 0.000000] Memory: 5519180K/5949732K available (21566K kernel code, 2200K rwdata, 5400K rodata, 3456K init, 4461K bss, 225752K reserved, 204800K cma-reserved)
74[ 0.000000] Virtual kernel memory layout:
75[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
76[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
77[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 21568 KB)
78[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 5440 KB)
79[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 3456 KB)
80[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 2200 KB)
81[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 4462 KB)
82[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
83[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
84[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
85[ 0.000000] 0xffffffbf27000000 - 0xffffffbf2cf52800 ( 95 MB actual)
86[ 0.000000] memory : 0xffffffc9c0000000 - 0xffffffcb3d4a0000 ( 6100 MB)
87[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
88[ 0.000000] Preemptible hierarchical RCU implementation.
89[ 0.000000] \x09RCU dyntick-idle grace-period acceleration is enabled.
90[ 0.000000] \x09No expedited grace period (rcu_normal_after_boot).
91[ 0.000000] \x09Tasks RCU enabled.
92[ 0.000000] NR_IRQS:64 nr_irqs:64 0
93[ 0.000000] PDC SDM845 v2 initialized
94[ 0.000000] \x09Offload RCU callbacks from CPUs: .
95[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
96[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
97[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
98[ 0.000018] clocksource: Switched to clocksource arch_sys_counter
99[ 0.002064] Console: colour dummy device 80x25
100[ 0.002079] console [tty0] enabled
101[ 0.002091] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
102[ 0.002099] pid_max: default: 32768 minimum: 301
103[ 0.002153] Security Framework initialized
104[ 0.002163] SELinux: Initializing.
105[ 0.002202] SELinux: Starting in permissive mode
106[ 0.002228] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
107[ 0.002232] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
108[ 0.003249] sched-energy: Sched-energy-costs installed from DT
109[ 0.011921] ASID allocator initialised with 32768 entries
110[ 0.013989] Hierarchical SRCU implementation.
111[ 0.092654] Brought up 8 CPUs
112[ 0.092660] SMP: Total of 8 processors activated.
113[ 0.092665] CPU features: detected: GIC system register CPU interface
114[ 0.092668] CPU features: detected: Privileged Access Never
115[ 0.092670] CPU features: detected: User Access Override
116[ 0.092672] CPU features: detected: 32-bit EL0 Support
117[ 0.154999] CPU: All CPU(s) started at EL1
118[ 0.155033] alternatives: patching kernel code
119[ 0.156841] wrong sd_flags in topology description
120[ 0.156851] ------------[ cut here ]------------
121[ 0.156866] WARNING: CPU: 0 PID: 1 at build_sched_domain+0x304/0x310
122[ 0.156873] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.217-Quantum+ #2
123[ 0.156875] Hardware name: Qualcomm Technologies, Inc. SDM845 v2.1 MTP PVT/MP (DT)
124[ 0.156879] task: (ptrval) task.stack: (ptrval)
125[ 0.156882] PC is at build_sched_domain+0x304/0x310
126[ 0.156884] LR is at build_sched_domain+0x304/0x310
127[ 0.156886] pc : [<ffffff982cf1fce0>] lr : [<ffffff982cf1fce0>] pstate: 60800045
128[ 0.156887] sp : ffffffcb33917bc0
129[ 0.156891] x29: 0000000000000040 x28: 0000000000000008
130[ 0.156895] x27: ffffff982ec4e718 x26: ffffff982ec64428
131[ 0.156899] x25: 0000000000000000 x24: ffffffcb33a21e00
132[ 0.156902] x23: 0000000000000000 x22: ffffff982ec64408
133[ 0.156905] x21: ffffffcb339b9a00 x20: 0000000000000000
134[ 0.156908] x19: ffffffcb339baa00 x18: 0000000000000002
135[ 0.156911] x17: ffffff982eeae000 x16: ffffff982ee6e0a8
136[ 0.156913] x15: 0000000000000000 x14: 0000000000000004
137[ 0.156916] x13: 0000000000000038 x12: 0000000000000001
138[ 0.156919] x11: ffffff982ec77000 x10: 0000000000000001
139[ 0.156922] x9 : e1c444804e649a00 x8 : e1c444804e649a00
140[ 0.156925] x7 : 0000000000000000 x6 : ffffffcb3aaa8802
141[ 0.156928] x5 : 0000000000000000 x4 : 000000000000000c
142[ 0.156931] x3 : 0000000000006e6f x2 : 0000000000000002
143[ 0.156934] x1 : 0000000000000000 x0 : 0000000000000026
144[ 0.156938] \x0aPC: 0xffffff982cf1fca0:
145[ 0.156940] fca0 eb08013f 54000221 aa1303e0 a95b4ff4 a95a57f6 a9595ff8 a95867fa a9576ffc
146[ 0.156953] fcc0 a9567bfd 910703ff d65f03c0 52800029 39070909 9000bca0 913d9800 94004688
147[ 0.156962] fce0 d4210000 17ffff71 97fe5f58 d101c3ff a9017bfd a9026ffc a90367fa a9045ff8
148[ 0.156971] fd00 a90557f6 a9064ff4 2a0203f3 f000e977 911c62f7 f862dae8 b000d3ba 912a035a
149[ 0.156981] \x0aLR: 0xffffff982cf1fca0:
150[ 0.156982] fca0 eb08013f 54000221 aa1303e0 a95b4ff4 a95a57f6 a9595ff8 a95867fa a9576ffc
151[ 0.156992] fcc0 a9567bfd 910703ff d65f03c0 52800029 39070909 9000bca0 913d9800 94004688
152[ 0.157001] fce0 d4210000 17ffff71 97fe5f58 d101c3ff a9017bfd a9026ffc a90367fa a9045ff8
153[ 0.157010] fd00 a90557f6 a9064ff4 2a0203f3 f000e977 911c62f7 f862dae8 b000d3ba 912a035a
154[ 0.157020] \x0aSP: 0xffffffcb33917b80:
155[ 0.157021] 7b80 2cf1fce0 ffffff98 33917bc0 ffffffcb 2cf1fce0 ffffff98 60800045 00000000
156[ 0.157030] 7ba0 ffffffc8 ffffff80 4e649a00 e1c44480 ffffffff ffffffff 2cf1fce0 ffffff98
157[ 0.157038] 7bc0 2ee37700 ffffff98 00000000 00000000 00000000 00000000 00000000 00000000
158[ 0.157048] 7be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
159[ 0.157062] ---[ end trace 550e081769f01126 ]---
160[ 0.157064] Call trace:
161[ 0.157068] [< (ptrval)>] build_sched_domain+0x304/0x310
162[ 0.223214] Registered cp15_barrier emulation handler
163[ 0.223240] Registered setend emulation handler
164[ 0.223571] Init ksuspend_mon thread
165[ 0.223601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
166[ 0.223616] futex hash table entries: 2048 (order: 6, 262144 bytes)
167[ 0.227834] pinctrl core: initialized pinctrl subsystem
168[ 0.234004] NET: Registered protocol family 16
169[ 0.235012] schedtune: configured to support 6 boost groups
170[ 0.235554] cpuidle: using governor menu
171[ 0.235676] cpuidle: using governor qcom
172[ 0.240266] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
173[ 0.240273] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
174[ 0.240846] DMA: preallocated 256 KiB pool for atomic allocations
175[ 0.240961] msm_smem_init: unable to create logging context
176[ 0.240994] <CORE> glink_init: unable to create log context
177[ 0.241371] exit: IPA_USB init success!
178[ 0.241419] Failed to create IPC log0
179[ 0.241429] Failed to create IPC log1
180[ 0.241433] Failed to create IPC log2
181[ 0.241437] Failed to create IPC log3
182[ 0.241441] Failed to create IPC log4
183[ 0.241741] pstore: using zlib compression
184[ 0.241785] console [pstore-1] enabled
185[ 0.241843] pstore: Registered ramoops as persistent store backend
186[ 0.241847] ramoops: attached 0x400000@0xac300000, ecc: 0/0
187[ 0.244469] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
188[ 0.244549] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
189[ 0.244843] qupv3_geni_se 8c0000.qcom,qupv3_0_geni_se: geni_se_probe Failed to allocate log context
190[ 0.244999] irq: no irq domain found for /soc/pinctrl@03400000 !
191[ 0.245506] qupv3_geni_se ac0000.qcom,qupv3_1_geni_se: geni_se_probe Failed to allocate log context
192[ 0.248408] unable to find DT imem DLOAD mode node
193[ 0.249889] unable to find DT imem EDLOAD mode node
194[ 0.250941] set_dload_mode ON
195[ 0.251368] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
196[ 0.259423] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0x8e000000
197[ 0.259529] platform 17300000.qcom,lpass: assigned reserved memory node adsp_region@0x8c500000
198[ 0.259641] platform 5c00000.qcom,ssc: assigned reserved memory node slpi_region@0x96700000
199[ 0.260202] platform 8300000.qcom,turing: assigned reserved memory node cdsp_region@0x95d00000
200[ 0.260414] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
201[ 0.260591] platform aae0000.qcom,venus: assigned reserved memory node video_region@0x95800000
202[ 0.262197] <CORE> glink_core_register_transport: unable to create log context for [spss:mailbox]
203[ 0.262273] <CORE> glink_mailbox_probe: unable to create log context for [spss:mailbox]
204[ 0.267024] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
205[ 0.267107] <CORE> glink_smem_native_probe: unable to create log context for [mpss:smem]
206[ 0.267448] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
207[ 0.267528] <CORE> glink_smem_native_probe: unable to create log context for [lpass:smem]
208[ 0.267909] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
209[ 0.267976] <CORE> glink_smem_native_probe: unable to create log context for [dsps:smem]
210[ 0.268452] <CORE> glink_core_register_transport: unable to create log context for [cdsp:smem]
211[ 0.268514] <CORE> glink_smem_native_probe: unable to create log context for [cdsp:smem]
212[ 0.269361] sps:sps is ready.
213[ 0.269842] (NULL device *): msm_gsi_probe:3154 failed to create IPC log, continue...
214[ 0.270143] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@0x8c400000
215[ 0.277857] msm-dcc 10a2000.dcc_v2: DCC list passed 2
216[ 0.279005] msm-dcc 10a2000.dcc_v2: All values written to enable
217[ 0.279746] platform soc:mem_dump: assigned reserved memory node mem_dump_region
218[ 0.282468] pm8998_s9_level: supplied by pm8998_s6_level
219[ 0.282495] pm8998_s9_level: Bringing 1uV into 17-17uV
220[ 0.282628] pm8998_s9_level_ao: supplied by pm8998_s6_level_ao
221[ 0.282648] pm8998_s9_level_ao: Bringing 1uV into 17-17uV
222[ 0.289706] pm8998_l24: supplied by pm8998_l12
223[ 0.291236] pm8998_lvs1: Bringing 1uV into 1800000-1800000uV
224[ 0.291573] pm8998_lvs2: Bringing 1uV into 1800000-1800000uV
225[ 0.304723] sdm845-v2-pinctrl 3400000.pinctrl: invalid resource
226[ 0.310803] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0x8c415000
227[ 0.331638] gpu_cx_gdsc: supplied by pm8998_s9_level
228[ 0.341216] cam_cc-sdm845 ad00000.qcom,camcc: Registered Camera CC clocks
229[ 0.342458] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
230[ 0.343523] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
231[ 0.345554] disp_cc-sdm845 af00000.qcom,dispcc: Registered Display CC clocks
232[ 0.368902] gcc-sdm845 100000.qcom,gcc: Registered GCC clocks
233[ 0.369906] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
234[ 0.370196] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(710000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
235[ 0.370267] gfxcc-sdm845 5090000.qcom,gfxcc: Registered GFX CC clocks
236[ 0.371841] clk: gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
237[ 0.371930] clk: gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 506a000.qcom,gmu
238[ 0.372121] gpu_cc-sdm845 5090000.qcom,gpucc: Registered GPU CC clocks
239[ 0.373306] video_cc-sdm845 ab00000.qcom,videocc: Registered Video CC clocks
240[ 0.373621] socinfo_print: v0.15, id=321, ver=2.1, raw_id=139, raw_ver=2, hw_plat=8, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=3 serial_number=3164261633 num_pmics=3 chip_family=0x4f raw_device_family=0x6 raw_device_number=0x0 nproduct_id=0x3f4 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0x6 ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
241[ 0.373624] msm_bus_fabric_rpmh_init_driver
242[ 0.373847] msm_bus: Probe started
243[ 0.374441] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
244[ 0.374489] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
245[ 0.374507] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
246[ 0.374561] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
247[ 0.376928] msm_bus: DT Parsing complete
248[ 0.380148] msm_bus_fab_init_noc_ops: Invalid Bus type
249[ 0.380341] msm_bus_fab_init_noc_ops: Invalid Bus type
250[ 0.380391] msm_bus_fab_init_noc_ops: Invalid Bus type
251[ 0.380570] msm_bus_fab_init_noc_ops: Invalid Bus type
252[ 0.391877] actuator_regulator: supplied by pmi8998_bob
253[ 0.392208] actuator_regulator: supplied by pmi8998_bob
254[ 0.392287] actuator_regulator: Failed to create debugfs directory
255[ 0.392312] actuator_regulator: Failed to create debugfs directory
256[ 0.392335] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
257[ 0.393256] arm-smmu 5040000.arm,smmu-kgsl: \x09(IDR0.CTTW overridden by dma-coherent property)
258[ 0.393375] arm-smmu 5040000.arm,smmu-kgsl: \x09stream matching with 5 register groups, mask 0x7
259[ 0.393537] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
260[ 0.396160] register_client_adhoc:find path.src 139 dest 627
261[ 0.396395] register_client_adhoc:Client handle 1 apps_smmu
262[ 0.396601] arm-smmu 15000000.apps-smmu: \x09(IDR0.CTTW overridden by dma-coherent property)
263[ 0.396717] arm-smmu 15000000.apps-smmu: \x09stream matching with 76 register groups, mask 0x7fff
264[ 0.397472] arm-smmu 15000000.apps-smmu: found 64 context interrupt(s) but have 45 context banks. assuming 45 context interrupts.
265[ 0.397982] register_client_adhoc:find path.src 139 dest 627
266[ 0.398140] register_client_adhoc:Client handle 2 apps_smmu
267[ 0.398376] register_client_adhoc:find path.src 139 dest 627
268[ 0.398523] register_client_adhoc:Client handle 3 apps_smmu
269[ 0.398738] register_client_adhoc:find path.src 22 dest 773
270[ 0.398822] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
271[ 0.399024] register_client_adhoc:find path.src 22 dest 773
272[ 0.399102] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu
273[ 0.399306] register_client_adhoc:find path.src 137 dest 772
274[ 0.399388] register_client_adhoc:Client handle 6 mnoc_sf_0_tbu
275[ 0.399541] register_client_adhoc:find path.src 139 dest 627
276[ 0.399691] register_client_adhoc:Client handle 7 apps_smmu
277[ 0.399889] register_client_adhoc:find path.src 139 dest 627
278[ 0.400062] register_client_adhoc:Client handle 8 apps_smmu
279[ 0.400281] register_client_adhoc:find path.src 139 dest 627
280[ 0.400425] register_client_adhoc:Client handle 9 apps_smmu
281[ 0.401328] iommu: Adding device ae00000.qcom,mdss_mdp to group 0
282[ 0.401465] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 1
283[ 0.401593] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 2
284[ 0.401756] iommu: Adding device 1de0000.qcedev to group 3
285[ 0.401878] iommu: Adding device 1de0000.qcrypto to group 4
286[ 0.402007] iommu: Adding device 18800000.qcom,icnss to group 5
287[ 0.402130] iommu: Adding device 800000.qcom,gpi-dma to group 6
288[ 0.402250] iommu: Adding device a00000.qcom,gpi-dma to group 7
289[ 0.402371] iommu: Adding device 88a7000.msm_tspp to group 8
290[ 0.402506] iommu: Adding device soc:apps_iommu_test_device to group 8
291[ 0.402622] iommu: Adding device soc:apps_iommu_coherent_test_device to group 8
292[ 0.402771] iommu: Adding device soc:qcom,msm-audio-ion to group 9
293[ 0.402897] iommu: Adding device a600000.ssusb to group 10
294[ 0.403018] iommu: Adding device soc:usb_audio_qmi_dev to group 11
295[ 0.404635] SCSI subsystem initialized
296[ 0.404735] usbcore: registered new interface driver usbfs
297[ 0.404755] usbcore: registered new interface driver hub
298[ 0.404846] usbcore: registered new device driver usb
299[ 0.405410] soc:usb_nop_phy supply vcc not found, using dummy regulator
300[ 0.405718] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c0:0x21)
301[ 0.405733] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c1:0x0)
302[ 0.405747] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c2:0x0)
303[ 0.405761] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c3:0x0)
304[ 0.405775] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c4:0x80)
305[ 0.405790] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c5:0x2)
306[ 0.405804] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c6:0x0)
307[ 0.405818] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c7:0x80)
308[ 0.405832] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c8:0x40)
309[ 0.405846] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8c9:0x0)
310[ 0.405861] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8ca:0x0)
311[ 0.405875] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cb:0x0)
312[ 0.405889] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cc:0x0)
313[ 0.405903] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cd:0x0)
314[ 0.405917] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8ce:0x0)
315[ 0.405931] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: (0x8cf:0x0)
316[ 0.405983] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 PON_REASON1 regs :[0x21] and Power-on reason: Triggered from Hard Reset and 'cold' boot
317[ 0.405988] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 PON_REASON1 regs :[0x21] and Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
318[ 0.406017] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: POFF_REASON regs :[0x2] and Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
319[ 0.406201] input: qpnp_pon as /devices/virtual/input/input0
320[ 0.407046] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
321[ 0.407063] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c0:0x20)
322[ 0.407078] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c1:0x0)
323[ 0.407092] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c2:0x0)
324[ 0.407106] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c3:0x0)
325[ 0.407120] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c4:0x80)
326[ 0.407135] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c5:0x8)
327[ 0.407149] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c6:0x0)
328[ 0.407163] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c7:0x80)
329[ 0.407176] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c8:0x0)
330[ 0.407191] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8c9:0x0)
331[ 0.407205] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8ca:0x0)
332[ 0.407219] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cb:0x0)
333[ 0.407233] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cc:0x0)
334[ 0.407247] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cd:0x0)
335[ 0.407262] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8ce:0x0)
336[ 0.407276] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: (0x8cf:0x0)
337[ 0.407324] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 PON_REASON1 regs :[0x20] and Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
338[ 0.407352] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: POFF_REASON regs :[0x8] and Power-off reason: Triggered from GP1 (Keypad_Reset1)
339[ 0.407755] media: Linux media interface: v0.10
340[ 0.407780] Linux video capture interface: v2.00
341[ 0.415861] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
342[ 0.416097] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x8ab00000
343[ 0.416181] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
344[ 0.416256] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node secure_sp_region
345[ 0.416330] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
346[ 0.416551] ION heap system created
347[ 0.416636] ION heap adsp created at 0x00000000fec00000 with size 1000000
348[ 0.416644] ION heap qsecom created at 0x000000008ab00000 with size 1400000
349[ 0.416652] ION heap qsecom_ta created at 0x00000000fdc00000 with size 1000000
350[ 0.416665] ION heap spss created at 0x00000000f7800000 with size 800000
351[ 0.416674] ION heap secure_display created at 0x00000000f8000000 with size 5c00000
352[ 0.416681] ION heap secure_heap created
353[ 0.417272] ipa ipa3_tz_unlock_reg:5226 Bad parameters
354[ 0.417296] ipa ipa3_pre_init:5428 Failed to unlock memory region using TZ
355[ 0.417387] register_client_adhoc:find path.src 90 dest 512
356[ 0.417876] register_client_adhoc:find path.src 90 dest 585
357[ 0.418030] register_client_adhoc:find path.src 1 dest 676
358[ 0.418281] register_client_adhoc:find path.src 143 dest 777
359[ 0.418364] register_client_adhoc:Client handle 10 ipa
360[ 0.418832] ipa ipa3_uc_state_check:284 uC interface not initialized
361[ 0.419242] ipa ipa3_uc_state_check:284 uC interface not initialized
362[ 0.419710] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 12
363[ 0.419912] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 13
364[ 0.420147] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 14
365[ 0.420872] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
366[ 0.420982] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
367[ 0.421096] PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
368[ 0.422189] Advanced Linux Sound Architecture Driver Initialized.
369[ 0.422895] Bluetooth: Core ver 2.22
370[ 0.422920] NET: Registered protocol family 31
371[ 0.422922] Bluetooth: HCI device and connection manager initialized
372[ 0.422931] Bluetooth: HCI socket layer initialized
373[ 0.422939] Bluetooth: L2CAP socket layer initialized
374[ 0.422962] Bluetooth: SCO socket layer initialized
375[ 0.423243] NetLabel: Initializing
376[ 0.423246] NetLabel: domain hash size = 128
377[ 0.423247] NetLabel: protocols = UNLABELED CIPSOv4
378[ 0.423293] NetLabel: unlabeled traffic allowed by default
379[ 0.423353] pcie:pcie_init.
380[ 0.423371] pcie_init: unable to create IPC log context for pcie0-short
381[ 0.423383] pcie_init: unable to create IPC log context for pcie0-long
382[ 0.423395] pcie_init: unable to create IPC log context for pcie0-dump
383[ 0.423407] pcie_init: unable to create IPC log context for pcie1-short
384[ 0.423420] pcie_init: unable to create IPC log context for pcie1-long
385[ 0.423431] pcie_init: unable to create IPC log context for pcie1-dump
386[ 0.423443] pcie_init: unable to create IPC log context for pcie2-short
387[ 0.423455] pcie_init: unable to create IPC log context for pcie2-long
388[ 0.423466] pcie_init: unable to create IPC log context for pcie2-dump
389[ 0.424372] gpu_gx_gdsc: supplied by pm8005_s1_level
390[ 0.424741] actuator_regulator: Failed to create debugfs directory
391[ 0.426170] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on cpu0
392[ 0.426843] clk: add_opp: Set OPP pair (1766400000 Hz, 780000 uv) on cpu0
393[ 0.426902] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on cpu1
394[ 0.427543] clk: add_opp: Set OPP pair (1766400000 Hz, 780000 uv) on cpu1
395[ 0.427604] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on cpu2
396[ 0.428269] clk: add_opp: Set OPP pair (1766400000 Hz, 780000 uv) on cpu2
397[ 0.428334] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on cpu3
398[ 0.429017] clk: add_opp: Set OPP pair (1766400000 Hz, 780000 uv) on cpu3
399[ 0.429075] clk: add_opp: Set OPP pair (825600000 Hz, 596000 uv) on cpu4
400[ 0.430199] clk: add_opp: Set OPP pair (2803200000 Hz, 1016000 uv) on cpu4
401[ 0.430274] clk: add_opp: Set OPP pair (825600000 Hz, 596000 uv) on cpu5
402[ 0.431360] clk: add_opp: Set OPP pair (2803200000 Hz, 1016000 uv) on cpu5
403[ 0.431414] clk: add_opp: Set OPP pair (825600000 Hz, 596000 uv) on cpu6
404[ 0.432404] clk: add_opp: Set OPP pair (2803200000 Hz, 1016000 uv) on cpu6
405[ 0.432465] clk: add_opp: Set OPP pair (825600000 Hz, 596000 uv) on cpu7
406[ 0.433473] clk: add_opp: Set OPP pair (2803200000 Hz, 1016000 uv) on cpu7
407[ 0.433819] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on soc:qcom,l3-cpu0
408[ 0.433822] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on soc:qcom,l3-cpu4
409[ 0.433824] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on soc:qcom,l3-cdsp
410[ 0.433826] clk: add_opp: Set OPP pair (300000000 Hz, 576000 uv) on 5000000.qcom,kgsl-3d0
411[ 0.435868] clk: add_opp: Set OPP pair (1478400000 Hz, 800000 uv) on soc:qcom,l3-cpu0
412[ 0.435871] clk: add_opp: Set OPP pair (1478400000 Hz, 800000 uv) on soc:qcom,l3-cpu4
413[ 0.435873] clk: add_opp: Set OPP pair (1478400000 Hz, 800000 uv) on soc:qcom,l3-cdsp
414[ 0.435875] clk: add_opp: Set OPP pair (1478400000 Hz, 800000 uv) on 5000000.qcom,kgsl-3d0
415[ 0.436409] legacy-dt-em: Registering EM of 0-3
416[ 0.436424] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
417[ 0.436426] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 3 >= em_cap_state2
418[ 0.436428] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 5 >= em_cap_state4
419[ 0.436430] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7
420[ 0.436434] energy_model: pd0 (0-3): <freq=300000, power=21, cost=123>
421[ 0.436436] energy_model: pd0 (0-3): <freq=403200, power=26, cost=113>
422[ 0.436439] energy_model: pd0 (0-3): <freq=480000, power=31, cost=114>
423[ 0.436441] energy_model: pd0 (0-3): <freq=576000, power=36, cost=110>
424[ 0.436443] energy_model: pd0 (0-3): <freq=652800, power=41, cost=110>
425[ 0.436445] energy_model: pd0 (0-3): <freq=748800, power=46, cost=108>
426[ 0.436447] energy_model: pd0 (0-3): <freq=825600, power=53, cost=113>
427[ 0.436449] energy_model: pd0 (0-3): <freq=902400, power=59, cost=115>
428[ 0.436451] energy_model: pd0 (0-3): <freq=979200, power=64, cost=115>
429[ 0.436454] energy_model: pd0 (0-3): <freq=1056000, power=70, cost=117>
430[ 0.436456] energy_model: pd0 (0-3): <freq=1132800, power=79, cost=123>
431[ 0.436458] energy_model: pd0 (0-3): <freq=1228800, power=89, cost=127>
432[ 0.436460] energy_model: pd0 (0-3): <freq=1324800, power=99, cost=132>
433[ 0.436462] energy_model: pd0 (0-3): <freq=1420800, power=108, cost=134>
434[ 0.436464] energy_model: pd0 (0-3): <freq=1516800, power=118, cost=137>
435[ 0.436466] energy_model: pd0 (0-3): <freq=1612800, power=134, cost=146>
436[ 0.436468] energy_model: pd0 (0-3): <freq=1689600, power=143, cost=149>
437[ 0.436470] energy_model: pd0 (0-3): <freq=1766400, power=160, cost=160>
438[ 0.436624] legacy-dt-em: Registering EM of 4-7
439[ 0.436628] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
440[ 0.436631] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 3 >= em_cap_state2
441[ 0.436633] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 4 >= em_cap_state3
442[ 0.436635] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 5 >= em_cap_state4
443[ 0.436637] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 6 >= em_cap_state5
444[ 0.436640] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 11 >= em_cap_state10
445[ 0.436643] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 23 >= em_cap_state22
446[ 0.436647] energy_model: pd4 (4-7): <freq=300000, power=90, cost=840>
447[ 0.436649] energy_model: pd4 (4-7): <freq=403200, power=113, cost=785>
448[ 0.436651] energy_model: pd4 (4-7): <freq=480000, power=135, cost=788>
449[ 0.436653] energy_model: pd4 (4-7): <freq=576000, power=157, cost=764>
450[ 0.436655] energy_model: pd4 (4-7): <freq=652800, power=175, cost=751>
451[ 0.436657] energy_model: pd4 (4-7): <freq=748800, power=198, cost=741>
452[ 0.436659] energy_model: pd4 (4-7): <freq=825600, power=210, cost=713>
453[ 0.436661] energy_model: pd4 (4-7): <freq=902400, power=233, cost=723>
454[ 0.436662] energy_model: pd4 (4-7): <freq=979200, power=263, cost=752>
455[ 0.436664] energy_model: pd4 (4-7): <freq=1056000, power=285, cost=756>
456[ 0.436666] energy_model: pd4 (4-7): <freq=1132800, power=322, cost=796>
457[ 0.436668] energy_model: pd4 (4-7): <freq=1209600, power=341, cost=790>
458[ 0.436670] energy_model: pd4 (4-7): <freq=1286400, power=379, cost=825>
459[ 0.436672] energy_model: pd4 (4-7): <freq=1363200, power=410, cost=843>
460[ 0.436674] energy_model: pd4 (4-7): <freq=1459200, power=462, cost=887>
461[ 0.436676] energy_model: pd4 (4-7): <freq=1536000, power=503, cost=917>
462[ 0.436678] energy_model: pd4 (4-7): <freq=1612800, power=542, cost=942>
463[ 0.436680] energy_model: pd4 (4-7): <freq=1689600, power=600, cost=995>
464[ 0.436681] energy_model: pd4 (4-7): <freq=1766400, power=649, cost=1029>
465[ 0.436683] energy_model: pd4 (4-7): <freq=1843200, power=717, cost=1090>
466[ 0.436685] energy_model: pd4 (4-7): <freq=1920000, power=813, cost=1186>
467[ 0.436687] energy_model: pd4 (4-7): <freq=1996800, power=866, cost=1215>
468[ 0.436689] energy_model: pd4 (4-7): <freq=2092800, power=1025, cost=1372>
469[ 0.436691] energy_model: pd4 (4-7): <freq=2169600, power=1054, cost=1361>
470[ 0.436693] energy_model: pd4 (4-7): <freq=2246400, power=1130, cost=1410>
471[ 0.436695] energy_model: pd4 (4-7): <freq=2323200, power=1254, cost=1513>
472[ 0.436697] energy_model: pd4 (4-7): <freq=2400000, power=1356, cost=1583>
473[ 0.436699] energy_model: pd4 (4-7): <freq=2476800, power=1503, cost=1701>
474[ 0.436700] energy_model: pd4 (4-7): <freq=2553600, power=1745, cost=1915>
475[ 0.436702] energy_model: pd4 (4-7): <freq=2649600, power=2106, cost=2228>
476[ 0.436704] energy_model: pd4 (4-7): <freq=2745600, power=2200, cost=2246>
477[ 0.436706] energy_model: pd4 (4-7): <freq=2764800, power=2300, cost=2331>
478[ 0.436708] energy_model: pd4 (4-7): <freq=2784000, power=2350, cost=2366>
479[ 0.436710] energy_model: pd4 (4-7): <freq=2803200, power=2400, cost=2400>
480[ 0.436730] cpufreq: driver osm-cpufreq up and running
481[ 0.436733] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
482[ 0.436773] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
483[ 0.436927] sched-energy energy-costs: cpu=0 eff=607 [freq=300000 cap=66 power_d0=21] -> [freq=1766400 cap=383 power_d0=160]
484[ 0.436930] CPU0: update cpu_power 557
485[ 0.436936] sched-energy energy-costs: cpu=1 eff=607 [freq=300000 cap=66 power_d0=21] -> [freq=1766400 cap=383 power_d0=160]
486[ 0.436938] CPU1: update cpu_power 557
487[ 0.436943] sched-energy energy-costs: cpu=2 eff=607 [freq=300000 cap=66 power_d0=21] -> [freq=1766400 cap=383 power_d0=160]
488[ 0.436944] CPU2: update cpu_power 557
489[ 0.436950] sched-energy energy-costs: cpu=3 eff=607 [freq=300000 cap=66 power_d0=21] -> [freq=1766400 cap=383 power_d0=160]
490[ 0.436951] CPU3: update cpu_power 557
491[ 0.436959] sched-energy energy-costs: cpu=4 eff=1024 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
492[ 0.436960] CPU4: update cpu_power 1491
493[ 0.436966] sched-energy energy-costs: cpu=5 eff=1024 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
494[ 0.436967] CPU5: update cpu_power 1491
495[ 0.436973] sched-energy energy-costs: cpu=6 eff=1024 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
496[ 0.436974] CPU6: update cpu_power 1491
497[ 0.436982] sched-energy energy-costs: cpu=7 eff=1024 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
498[ 0.436983] CPU7: update cpu_power 1491
499[ 0.437186] sched-energy energy-costs: Sched-energy-costs capacity updated
500[ 0.437215] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
501[ 0.437784] clocksource: Switched to clocksource arch_sys_counter
502[ 0.454318] VFS: Disk quotas dquot_6.6.0
503[ 0.454363] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
504[ 0.454906] debugcc-sdm845 soc:qcom,cc-debug@100000: Registered debug mux successfully
505[ 0.455467] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
506[ 0.455469] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
507[ 0.455522] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
508[ 0.455525] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
509[ 0.455528] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
510[ 0.455531] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
511[ 0.455534] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
512[ 0.455873] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
513[ 0.455891] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
514[ 0.455893] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
515[ 0.455932] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
516[ 0.455935] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
517[ 0.455937] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
518[ 0.455939] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
519[ 0.455941] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
520[ 0.461015] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
521[ 0.466205] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
522[ 0.466294] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=1, clocks successfully
523[ 0.466307] mdss_pll_probe: MDSS pll label = MDSS DP PLL
524[ 0.469813] NET: Registered protocol family 2
525[ 0.470161] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
526[ 0.470271] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
527[ 0.470536] TCP: Hash tables configured (established 65536 bind 65536)
528[ 0.470568] UDP hash table entries: 4096 (order: 5, 131072 bytes)
529[ 0.470615] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
530[ 0.470733] NET: Registered protocol family 1
531[ 0.470748] PCI: CLS 0 bytes, default 128
532[ 0.471907] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
533[ 0.472154] Trying to unpack rootfs image as initramfs...
534[ 0.641389] Freeing initrd memory: 13020K
535[ 0.642151] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
536[ 0.645347] workingset: timestamp_bits=45 max_order=21 bucket_order=0
537[ 0.646573] exFAT: file-system version 2.2.0-3arter97
538[ 0.646728] Registering sdcardfs 0.1
539[ 0.646795] ntfs: driver 2.1.32 [Flags: R/O].
540[ 0.646830] fuse init (API version 7.26)
541[ 0.647052] SELinux: Registering netfilter hooks
542[ 0.647563] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
543[ 0.647565] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
544[ 0.647567] pfk [pfk_init]: Driver initialized successfully
545[ 0.647977] Key type asymmetric registered
546[ 0.647980] Asymmetric key parser 'x509' registered
547[ 0.648024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
548[ 0.648027] io scheduler noop registered
549[ 0.648028] io scheduler deadline registered
550[ 0.648059] io scheduler cfq registered (default)
551[ 0.655736] fb0: Virtual frame buffer device, using 3000K of video memory
552[ 0.656335] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5b00: Registered qpnp_clkdiv_1 successfully
553[ 0.656393] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5c00: Registered qpnp_clkdiv_2 successfully
554[ 0.656445] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5d00: Registered qpnp_clkdiv_3 successfully
555[ 0.658779] glink_loopback_server_init: unable to create log context
556[ 0.659072] <CORE> glink_core_register_transport: unable to create log context for [wdsp:spi]
557[ 0.659503] msm_smp2p_init: unable to create log context
558[ 0.660626] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
559[ 0.660632] logging for Indications: Unable to create QMI IPC qmi_log_init
560[ 0.661082] icnss: Unable to create log context
561[ 0.661089] icnss: Unable to create log long context
562[ 0.661926] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
563[ 0.661992] icnss: Platform driver probed successfully
564[ 0.662615] register_client_adhoc:find path.src 125 dest 512
565[ 0.662829] register_client_adhoc:Client handle 11 scm_pas
566[ 0.662847] minidump-id not found for adsp
567[ 0.662972] minidump-id not found for slpi
568[ 0.663032] minidump-id not found for cdsp
569[ 0.663281] register_client_adhoc:find path.src 63 dest 512
570[ 0.663405] register_client_adhoc:Client handle 12 pil-venus
571[ 0.663415] minidump-id not found for venus
572[ 0.663429] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
573[ 0.663538] minidump-id not found for ipa_fws
574[ 0.663546] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
575[ 0.663647] minidump-id not found for a630_zap
576[ 0.663655] subsys-pil-tz soc:qcom,kgsl-hyp: for a630_zap segments only will be dumped.
577[ 0.664019] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
578[ 0.664461] qiib_driver_data_init: unable to create logging context
579[ 0.665292] msm_geni_serial 898000.qcom,qup_uart: Wakeup byte 0xfd
580[ 0.665318] msm_geni_serial 898000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
581[ 0.665710] 898000.qcom,qup_uart: ttyHS0 at MMIO 0x898000 (irq = 8, base_baud = 0) is a MSM
582[ 0.666141] msm_geni_serial_init: Driver initialized
583[ 0.666554] register_client_adhoc:find path.src 1 dest 618
584[ 0.666693] register_client_adhoc:Client handle 13 msm-rng-noc
585[ 0.668948] diag: MUX: unable to register pcie operations for proc: 0, err: -22
586[ 0.668961] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22
587[ 0.671581] [drm] Initialized
588[ 0.671708] register_client_adhoc:find path.src 20003 dest 20515
589[ 0.671782] register_client_adhoc:find path.src 20004 dest 20515
590[ 0.671833] register_client_adhoc:Client handle 14 disp_rsc_mnoc
591[ 0.671853] register_client_adhoc:find path.src 20001 dest 20513
592[ 0.671909] register_client_adhoc:Client handle 15 disp_rsc_llcc
593[ 0.671930] register_client_adhoc:find path.src 20000 dest 20512
594[ 0.671984] register_client_adhoc:Client handle 16 disp_rsc_ebi
595[ 0.672144] [sde_rsc_hw:rsc_hw_init:679]: sde rsc init successfully done
596[ 0.672156] [sde_rsc:sde_rsc_probe:1440]: sde rsc index:0 probed successfully
597[ 0.672528] dsi_phy ae94400.qcom,mdss_dsi_phy0: failed to get memory resource: dyn_refresh_base
598[ 0.672651] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
599[ 0.672673] dsi_phy ae96400.qcom,mdss_dsi_phy0: failed to get memory resource: dyn_refresh_base
600[ 0.672734] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
601[ 0.673195] AXI: get_pdata(): Error: Client name not found
602[ 0.673202] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
603[ 0.673214] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
604[ 0.674862] msm-dsi-panel:[dsi_panel_parse_reset_sequence:1942] RESET SEQ LENGTH = 24
605[ 0.674882] msm-dsi-panel:[dsi_panel_parse_bl_config:2253] default backlight bl_def_val= 200
606[ 0.674897] msm-dsi-panel:[dsi_panel_parse_misc_features:1991] dsi_panel_parse_misc_features: ulps feature enabled
607[ 0.674901] msm-dsi-panel:[dsi_panel_parse_misc_features:1997] dsi_panel_parse_misc_features: ulps during suspend feature disabled
608[ 0.674961] msm-dsi-panel:[dsi_panel_parse_esd_config:3211] ESD enabled with mode: register_read
609[ 0.674982] msm-dsi-display:[dsi_display_clocks_init] failed to get src_byte_clk, rc=-2
610[ 0.675450] msm-dsi-display:[dsi_display_get_boot_display] index = 0
611[ 0.675457] msm-dsi-display:[dsi_display_get_boot_display] index = 1
612[ 0.675815] register_client_adhoc:find path.src 1 dest 590
613[ 0.675936] register_client_adhoc:Client handle 17 mdss_reg
614[ 0.675965] register_client_adhoc:find path.src 22 dest 512
615[ 0.676100] register_client_adhoc:find path.src 23 dest 512
616[ 0.676223] register_client_adhoc:Client handle 18 mdss_sde
617[ 0.676267] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops 0xffffff982e413f90)
618[ 0.676272] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops 0xffffff982e4183d8)
619[ 0.676468] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_samsung_s6e3fc2x01_cmd_display'
620[ 0.676759] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display@21 (ops 0xffffff982e414e60)
621[ 0.676787] [drm] mapped mdp address space @ffffff8009f00000
622[ 0.676795] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
623[ 0.676853] [drm:_sde_kms_get_splash_data:3313] found continuous splash base address:9d400000 size:2400000
624[ 0.677541] random: crng init done
625[ 0.678347] [drm:sde_kms_hw_init:3442] sde hardware revision:0x40000001
626[ 0.678994] [drm] Created domain mdp_ns [80000000,80000000] secure=0
627[ 0.682482] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 15
628[ 0.682814] [drm] probing device qcom,smmu_sde_sec
629[ 0.682817] [drm] Created domain mdp_s [80000000,80000000] secure=1
630[ 0.685783] [drm] invalid feature map 9 for feature 10
631[ 0.685889] [drm] invalid feature map 9 for feature 10
632[ 0.685975] [drm] invalid feature map 9 for feature 10
633[ 0.686076] [drm] invalid feature map 9 for feature 10
634[ 0.700198] [drm:sde_backlight_setup:149] [sde error]props.brightness = 200
635[ 0.701322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
636[ 0.701324] [drm] No driver support for vblank timestamp query.
637[ 0.702241] msm-dsi-panel:[dsi_panel_parse_topology:2748] default topology: lm: 1 comp_enc:0 intf: 1
638[ 0.702490] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:2836] partial update disabled as the property is not set
639[ 0.702653] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 662 registered
640[ 0.705539] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 16
641[ 0.705735] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 17
642[ 0.706885] register_client_adhoc:find path.src 26 dest 512
643[ 0.707023] register_client_adhoc:Client handle 19 grp3d
644[ 0.707046] register_client_adhoc:find path.src 26 dest 10036
645[ 0.707137] register_client_adhoc:Client handle 20 cnoc
646[ 0.707148] query_client_usecase_all: query_start
647[ 0.707181] query_client_usecase_all: query_start
648[ 0.707730] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 18
649[ 0.707939] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 19
650[ 0.737189] brd: module loaded
651[ 0.740347] loop: module loaded
652[ 0.740522] zram: Added device: zram0
653[ 0.741863] CHRDEV "qseecom" major number 233 goes below the dynamic allocation range
654[ 0.742051] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
655[ 0.742085] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
656[ 0.742091] QSEECOM: qseecom_probe: no-clock-support=0x1
657[ 0.742094] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
658[ 0.742150] register_client_adhoc:find path.src 125 dest 512
659[ 0.742448] register_client_adhoc:Client handle 21 qseecom-noc
660[ 0.742538] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
661[ 0.742999] CHRDEV "okl4_link_shbuf" major number 232 goes below the dynamic allocation range
662[ 0.743133] Loading NXP ESE driver
663[ 0.743148] Loading NXP NFC driver
664[ 0.743270] register_client_adhoc:find path.src 125 dest 512
665[ 0.743433] register_client_adhoc:Client handle 22 qcedev-noc
666[ 0.744924] qce 1de0000.qcedev: QTI Crypto 5.4.1 device found @0x1de0000
667[ 0.744933] qce 1de0000.qcedev: CE device = 0x0 IO base, CE = ffffff8009e80000 Consumer (IN) PIPE 6,\x0aProducer (OUT) PIPE 7 IO base BAM = 0000000000000000\x0aBAM IRQ 105 Engines Availability = 0x2011073
668[ 0.744964] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000001dc4000
669[ 0.744980] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000001dc4000
670[ 0.744998] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000001dc4000
671[ 0.745011] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000001dc4000
672[ 0.745030] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000001dc4000
673[ 0.745045] sps:BAM 0x0000000001dc4000 is registered.
674[ 0.745214] sps:BAM 0x0000000001dc4000 (va:0xffffff8009fc0000) enabled: ver:0x27, number of pipes:16
675[ 0.745434] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 105
676[ 0.746036] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 20
677[ 0.746788] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
678[ 0.746792] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
679[ 0.746796] qcedev_setup_context_bank size:0x40000000, dev:ffffffcb326c5010, mapping:ffffffcb2a967c00
680[ 0.746907] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 21
681[ 0.748989] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
682[ 0.748992] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0x60200000
683[ 0.748996] qcedev_setup_context_bank size:0x40000000, dev:ffffffcb326c5410, mapping:ffffffcb2a9b9500
684[ 0.749505] register_client_adhoc:find path.src 125 dest 512
685[ 0.749671] register_client_adhoc:Client handle 23 qcrypto-noc
686[ 0.750474] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.1 device found @0x1de0000
687[ 0.750478] qcrypto 1de0000.qcrypto: CE device = 0x0 IO base, CE = ffffff800c020000 Consumer (IN) PIPE 4,\x0aProducer (OUT) PIPE 5 IO base BAM = 0000000000000000\x0aBAM IRQ 105 Engines Availability = 0x2011073
688[ 0.750742] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 105
689[ 0.751104] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
690[ 0.751187] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
691[ 0.751253] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
692[ 0.751330] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
693[ 0.751386] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
694[ 0.751449] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
695[ 0.751504] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
696[ 0.751561] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
697[ 0.751617] qcrypto 1de0000.qcrypto: qcrypto-sha1
698[ 0.751674] qcrypto 1de0000.qcrypto: qcrypto-sha256
699[ 0.751732] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
700[ 0.751794] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
701[ 0.751851] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
702[ 0.751916] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
703[ 0.751971] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
704[ 0.752028] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
705[ 0.752088] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
706[ 0.752145] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
707[ 0.752207] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
708[ 0.752269] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
709[ 0.752528] CHRDEV "iceufs" major number 231 goes below the dynamic allocation range
710[ 0.752984] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
711[ 0.755366] qcom_ice_get_pdevice: found ice device ffffffcb2f18b800
712[ 0.755368] qcom_ice_get_pdevice: matching platform device ffffffcb32a96400
713[ 0.755466] register_client_adhoc:find path.src 123 dest 512
714[ 0.755662] register_client_adhoc:find path.src 1 dest 757
715[ 0.755814] register_client_adhoc:Client handle 24 ufshc_mem
716[ 0.756340] scsi host0: ufshcd
717[ 0.760943] qcom_ice 1d90000.ufsice: QC ICE 3.1.75 device found @0xffffff80096a8000
718[ 0.790538] SCSI Media Changer driver v0.25
719[ 0.791231] ese_probe: device tree set SPI clock Frequency 8000000
720[ 0.791233] ese_probe: rst gpio not provided
721[ 0.791235] ese_probe: device tree set '1-0028' as eSE power controller
722[ 0.791266] ese_probe: eSE is configured
723[ 0.792217] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
724[ 0.793038] libphy: Fixed MDIO Bus: probed
725[ 0.793041] tun: Universal TUN/TAP device driver, 1.6
726[ 0.793042] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
727[ 0.793070] sky2: driver version 1.30
728[ 0.793210] PPP generic driver version 2.4.2
729[ 0.793246] PPP BSD Compression module registered
730[ 0.793251] PPP Deflate Compression module registered
731[ 0.793271] PPP MPPE Compression module registered
732[ 0.793276] NET: Registered protocol family 24
733[ 0.793351] CLD80211: Initializing
734[ 0.793411] usbcore: registered new interface driver r8152
735[ 0.793421] usbcore: registered new interface driver asix
736[ 0.793432] usbcore: registered new interface driver ax88179_178a
737[ 0.793439] usbcore: registered new interface driver cdc_ether
738[ 0.793446] usbcore: registered new interface driver net1080
739[ 0.793452] usbcore: registered new interface driver cdc_subset
740[ 0.793459] usbcore: registered new interface driver zaurus
741[ 0.793467] usbcore: registered new interface driver cdc_ncm
742[ 0.793470] CHRDEV "uio" major number 230 goes below the dynamic allocation range
743[ 0.793671] msm_sharedmem: sharedmem_register_qmi: qmi init successful
744[ 0.797517] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
745[ 0.798093] msm-usb-ssphy-qmp 88e8000.ssphy: failed to get phandle for msm_ssphy_qmp
746[ 0.798644] msm-qusb-phy-v2 88e2000.qusb: qusb_phy_probe:qusb-phy-ophost-init-seq got!
747[ 0.798773] msm-qusb-phy-v2 88e2000.qusb: usb_oe_exist=1
748[ 0.798992] actuator_regulator: Failed to create debugfs directory
749[ 0.800110] msm-dwc3 a600000.ssusb: unable to get dbm device
750[ 0.800632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
751[ 0.800636] ehci-pci: EHCI PCI platform driver
752[ 0.800654] ehci-platform: EHCI generic platform driver
753[ 0.800817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
754[ 0.800830] ohci-pci: OHCI PCI platform driver
755[ 0.800842] ohci-platform: OHCI generic platform driver
756[ 0.801249] usbcore: registered new interface driver cdc_acm
757[ 0.801250] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
758[ 0.801260] usbcore: registered new interface driver usb-storage
759[ 0.801267] usbcore: registered new interface driver usb_ehset_test
760[ 0.801274] usbcore: registered new interface driver lvs
761[ 0.802160] fgsi_init: Err allocating ipc_log_ctxt
762[ 0.802966] qpnp-pdphy c440000.qcom,spmi:qcom,pmi8998@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
763[ 0.803230] mousedev: PS/2 mouse device common for all mice
764[ 0.803304] usbcore: registered new interface driver xpad
765[ 0.803306] synaptics,s3320: tpd_driver_init enter
766[ 0.803535] fingerprint_detect_probe
767[ 0.803563] fingerprint_detect soc:fingerprint_detect: fp-gpio-id0 - gpio: 91
768[ 0.803565] fingerprint_detect soc:fingerprint_detect: fingerprint_detect_probe: gpio_is_valid(fp_detect->id0_gpio=91)
769[ 0.807225] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
770[ 0.810087] fingerprint_detect_probe: 100
771[ 0.820042] fingerprint_detect_probe: 100
772[ 0.830043] fingerprint_detect_probe: 100
773[ 0.830046] fingerprint_detect soc:fingerprint_detect: fingerprint_detect_probe: ok
774[ 0.830244] fpc1020_probe: fp version 4
775[ 0.830265] fpc1020_init OK
776[ 0.830265] gf_spi: gf_init:fp version 4
777[ 0.830270] CHRDEV "goodix_fp_spi" major number 229 goes below the dynamic allocation range
778[ 0.831739] input: gf_input as /devices/virtual/input/input1
779[ 0.831770] gf_spi: version V1.2.08
780[ 0.831837] gf_spi: status = 0x0
781[ 0.831840] [+silead_fp-] SILEAD_FP Driver, Version: v0.2.3.
782[ 0.831842] silfp_dev_init:fp version 4
783[ 0.832195] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
784[ 0.832432] i2c /dev entries driver
785[ 0.832583] i2c_geni 88c000.i2c: No reset config specified
786[ 0.832592] i2c_geni 88c000.i2c: Bus frequency not specified, default to 400KHz.
787[ 0.832629] i2c_geni 88c000.i2c: Geni-I2C speed=400000
788[ 0.833215] nfc_parse_dt: 63, 12, 62, 116, error:0
789[ 0.833497] nfc_probe: probing NXP NFC exited successfully
790[ 0.833498] nfc_probe: Name of nfcc: 1-0028.
791[ 0.833619] i2c_geni 890000.i2c: No reset config specified
792[ 0.833628] i2c_geni 890000.i2c: Bus frequency not specified, default to 400KHz.
793[ 0.833661] i2c_geni 890000.i2c: Geni-I2C speed=400000
794[ 0.834116] i2c_geni 89c000.i2c: No reset config specified
795[ 0.834124] i2c_geni 89c000.i2c: Bus frequency not specified, default to 400KHz.
796[ 0.834160] i2c_geni 89c000.i2c: Geni-I2C speed=400000
797[ 0.834631] i2c_geni a88000.i2c: reset config specified
798[ 0.834670] i2c_geni a88000.i2c: Geni-I2C speed=100000
799[ 0.835244] i2c_geni a88000.i2c: i2c error :-107
800[ 0.835443] i2c_geni a88000.i2c: i2c error :-107
801[ 0.835636] i2c_geni a88000.i2c: i2c error :-107
802[ 0.835830] i2c_geni a88000.i2c: i2c error :-107
803[ 0.835837] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107
804[ 0.835847] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107
805[ 0.835858] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107
806[ 0.835895] i2c_pmic: probe of 0-0008 failed with error -107
807[ 0.836147] i2c_geni a88000.i2c: i2c error :-107
808[ 0.836342] i2c_geni a88000.i2c: i2c error :-107
809[ 0.836536] i2c_geni a88000.i2c: i2c error :-107
810[ 0.836730] i2c_geni a88000.i2c: i2c error :-107
811[ 0.836737] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107
812[ 0.836746] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107
813[ 0.836755] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107
814[ 0.836774] i2c_pmic: probe of 0-000c failed with error -107
815[ 0.836931] i2c_geni a90000.i2c: No reset config specified
816[ 0.836939] i2c_geni a90000.i2c: Bus frequency not specified, default to 400KHz.
817[ 0.836974] i2c_geni a90000.i2c: Geni-I2C speed=400000
818[ 0.837413] synaptics,s3320: before on cpu [5]
819[ 0.837421] synaptics,s3320: check CPU[0] is [online]
820[ 0.839136] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 22
821[ 0.839482] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 23
822[ 0.840650] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 24
823[ 0.841354] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 25
824[ 0.842608] register_client_adhoc:find path.src 1 dest 590
825[ 0.842820] register_client_adhoc:Client handle 25 sde_reg
826[ 0.842875] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 26
827[ 0.842947] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 27
828[ 0.843068] register_client_adhoc:find path.src 25 dest 512
829[ 0.843219] register_client_adhoc:Client handle 26 mdss_rotator
830[ 0.843233] register_client_adhoc:find path.src 1 dest 590
831[ 0.843349] register_client_adhoc:Client handle 27 mdss_rot_reg
832[ 0.843702] No change in context(0==0), skip
833[ 0.844911] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:0, panic:1, dump:2
834[ 0.845685] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
835[ 0.846488] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
836[ 0.847349] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
837[ 0.848392] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 28
838[ 0.848514] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 29
839[ 0.848577] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@0x8bf00000
840[ 0.848649] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 30
841[ 0.848755] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 31
842[ 0.848878] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 32
843[ 0.848949] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 33
844[ 0.849501] register_client_adhoc:find path.src 1 dest 589
845[ 0.849647] register_client_adhoc:Client handle 28 cam_ahb
846[ 0.849750] register_client_adhoc:find path.src 136 dest 512
847[ 0.849877] register_client_adhoc:Client handle 29 cam_hf_1_mnoc
848[ 0.850051] register_client_adhoc:find path.src 146 dest 778
849[ 0.850087] register_client_adhoc:Client handle 30 cam_hf_1_camnoc
850[ 0.850182] register_client_adhoc:find path.src 145 dest 512
851[ 0.850303] register_client_adhoc:Client handle 31 cam_hf_2_mnoc
852[ 0.850467] register_client_adhoc:find path.src 147 dest 778
853[ 0.850503] register_client_adhoc:Client handle 32 cam_hf_2_camnoc
854[ 0.850595] register_client_adhoc:find path.src 137 dest 512
855[ 0.850722] register_client_adhoc:Client handle 33 cam_sf_1_mnoc
856[ 0.850874] register_client_adhoc:find path.src 148 dest 778
857[ 0.850909] register_client_adhoc:Client handle 34 cam_sf_1_camnoc
858[ 0.857366] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 0
859[ 0.857450] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 0
860[ 0.860098] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 1
861[ 0.860176] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 1
862[ 0.860726] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 256 No clk named ife_dsp_clk found. Dev acc4000.qcom,vfe-lite
863[ 0.860738] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 107 option clk get failed
864[ 0.862764] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 2
865[ 0.862842] CAM_INFO: CAM-ISP: cam_vfe_reset: 390 calling RESET on vfe 2
866[ 0.863942] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 122 Camera ISP probe complete
867[ 0.864854] CAM_INFO: CAM: cam_res_mgr_probe: 681 Disable shared gpio support.
868[ 0.866437] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
869[ 0.866450] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
870[ 0.870317] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 608 Error: cam-secure already got handle 0x45961
871[ 0.871804] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 119 Camera JPEG probe complete
872[ 0.876534] SMB2: smb2_chg_config_init: PMI8998 Revision=0x2
873[ 0.876543] SMB2: smb2_parse_dt: temp_littel_cool_low_current:450
874[ 0.876557] SMB2: smb2_parse_dt: T1:160, T2:350, T3:400, fcc1:650, fcc1:750, cut1:550, cut2:650,full:4430
875[ 0.876561] SMB2: smb2_parse_dt: OTG_ICL:enable:1,CapThr:15,LowThr:1000000,NorThr:1500000
876[ 0.876563] SMB2: smb2_parse_dt: q1:160,q2:350,q3:400,NORMAL_CUTOFF:550,warm:650,FULL=4430
877[ 0.876590] SMB2: smb2_parse_dt: T0=-30, T1=0, T2=50, T3=120, T4=160, T5=450, T6=530
878[ 0.876592] SMB2: smb2_parse_dt: BATT_TEMP_LITTLE_COLD=325, 3975, 3700
879[ 0.876593] SMB2: smb2_parse_dt: BATT_TEMP_COOL=500, 4400, 4150
880[ 0.876594] SMB2: smb2_parse_dt: BATT_TEMP_LITTLE_COOL=875, 4400, 4270
881[ 0.876595] SMB2: smb2_parse_dt: BATT_TEMP_PRE_NORMAL=1625, 4400, 4270
882[ 0.876596] SMB2: smb2_parse_dt: BATT_TEMP_NORMAL=1950, 4400, 4270
883[ 0.876597] SMB2: smb2_parse_dt: BATT_TEMP_WARM=875, 4080, 3980
884[ 0.876598] SMB2: smb2_parse_dt: cutoff_volt_with_charger=3250, disable-pd=1
885[ 0.876599] SMB2: smb2_parse_dt: sw_iterm_ma=296,check_batt_full_by_sw=1
886[ 0.876698] SMBLIB: op_set_collapse_fet: USBIN_5V_AICL_THRESHOLD_CFG_REG(0x1381)=0x3
887[ 0.876737] SMBLIB: op_set_collapse_fet: USBIN_CONT_AICL_THRESHOLD_CFG_REG(0x1384)=0x3
888[ 0.876777] SMBLIB: op_set_collapse_fet: USBIN_AICL_OPTIONS_CFG_REG(0x1380)=0xc7
889[ 0.876819] SMBLIB: op_set_collapse_fet: USBIN_LOAD_CFG_REG(0x1365)=0xf7
890[ 0.877112] SMBLIB: op_battery_temp_region_set: set temp_region=5
891[ 0.877185] register_client_adhoc:find path.src 1 dest 731
892[ 0.877388] register_client_adhoc:Client handle 35 dash_clk_vote
893[ 0.877722] actuator_regulator: Failed to create debugfs directory
894[ 0.877791] actuator_regulator: Failed to create debugfs directory
895[ 0.877851] SMB2: smb2_init_hw: vbat_max=4365000, ibat_max=500000, iusb_max=1800000
896[ 0.878001] SMBLIB: smblib_set_dc_suspend: 0
897[ 0.878049] SMBLIB: smblib_dc_icl_vote_callback: dc icl set 1200000
898[ 0.878229] SMBLIB: smblib_chg_disable_vote_callback: set chg_disable=0
899[ 0.879132] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
900[ 0.879140] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
901[ 0.879198] SMBLIB: smblib_usb_plugin_locked: acquire chg_wake_lock
902[ 0.879704] SMBLIB: smblib_awake_vote_callback: set awake=1
903[ 0.879720] SMBLIB: smblib_usb_plugin_locked: IRQ: attached
904[ 0.879923] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
905[ 0.879932] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
906[ 0.880069] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
907[ 0.880077] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
908[ 0.880115] SMBLIB: smblib_handle_usb_source_change: APSD_STATUS=0x01
909[ 0.880147] SMBLIB: op_charging_en: enable=1
910[ 0.880168] SMBLIB: get_property_from_fg: no bms psy found
911[ 0.880175] SMBLIB: get_prop_batt_temp: Couldn't get temperature rc=-22
912[ 0.880185] SMBLIB: handle_batt_temp_normal: triggered
913[ 0.880194] SMBLIB: set_chg_ibat_vbat_max: set ibatmax=1950 and set vbatmax=4400
914[ 0.880206] SMBLIB: set_property_on_fg: no bms psy found
915[ 0.880213] SMBLIB: op_battery_temp_region_set: set temp_region=5
916[ 0.880223] SMBLIB: smblib_handle_apsd_done: apsd result=0x1, name=SDP, psy_type=4
917[ 0.880225] SMBLIB: get_property_from_fg: no bms psy found
918[ 0.880234] SMBLIB: get_prop_batt_current_now: Couldn't get current rc=-22
919[ 0.880241] SMBLIB: smblib_handle_apsd_done: apsd done,current_now=0
920[ 0.880243] SMBLIB: set_property_on_fg: no bms psy found
921[ 0.880960] SMBLIB: get_property_from_fg: no bms psy found
922[ 0.880967] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
923[ 0.880974] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
924[ 0.880981] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
925[ 0.881040] SMBLIB: get_property_from_fg: no bms psy found
926[ 0.881046] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
927[ 0.881051] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
928[ 0.881060] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
929[ 0.881247] SMBLIB: get_prop_chg_protect_status: failed to read usb_voltage rc=-517
930[ 0.881256] SMBLIB: get_property_from_fg: no bms psy found
931[ 0.881262] SMBLIB: get_prop_batt_temp: Couldn't get temperature rc=-22
932[ 0.881287] SMBLIB: op_get_fastchg_ing: no fast_charger register found
933[ 0.881472] SMBLIB: smblib_set_icl_current: icl_ua=500000
934[ 0.881670] SMBLIB: smblib_set_usb_suspend: suspend=0
935[ 0.881735] SMBLIB: get_property_from_fg: no bms psy found
936[ 0.881741] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
937[ 0.881747] SMBLIB: get_prop_fast_adapter_update: no fast_charger register found
938[ 0.881755] SMBLIB: get_prop_fast_chg_started: no fast_charger register found
939[ 0.886596] SMBLIB: smblib_set_icl_current: icl_ua=500000
940[ 0.886682] SMBLIB: smblib_set_usb_suspend: suspend=0
941[ 0.887138] SMB2: request_plug_irq: request usb_plug irq success
942[ 0.887143] SMB2: request_plug_irq: request_plug_irq:reboot time hw detect gpio low, vote 1
943[ 0.887147] SMBLIB: op_set_prop_otg_switch: set otg_switch=1
944[ 0.900476] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
945[ 0.901202] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
946[ 0.901779] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
947[ 0.902236] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
948[ 0.902703] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
949[ 0.903129] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
950[ 0.905265] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
951[ 0.907390] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
952[ 0.907755] scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
953[ 0.909903] scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
954[ 0.911304] sd 0:0:0:0: [sda] Write Protect is off
955[ 0.911307] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
956[ 0.911334] sd 0:0:0:1: [sdb] Write Protect is off
957[ 0.911339] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
958[ 0.911535] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
959[ 0.911682] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
960[ 0.911918] sd 0:0:0:2: [sdc] Write Protect is off
961[ 0.911920] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
962[ 0.912263] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
963[ 0.912406] sd 0:0:0:4: [sde] Write Protect is off
964[ 0.912408] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
965[ 0.912423] sd 0:0:0:3: [sdd] Write Protect is off
966[ 0.912425] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
967[ 0.912608] sd 0:0:0:5: [sdf] Write Protect is off
968[ 0.912610] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
969[ 0.912729] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
970[ 0.912881] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
971[ 0.913064] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
972[ 0.914818] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17
973[ 0.915268] sdb: sdb1 sdb2
974[ 0.916741] sdc: sdc1 sdc2
975[ 0.917329] sdd: sdd1 sdd2 sdd3
976[ 0.917710] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
977[ 0.918007] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63 sde64 sde65 sde66 sde67 sde68 sde69 sde70 sde71 sde72
978[ 0.918195] SMBLIB: op_set_prop_otg_switch: retry time = 0,ctrl = 48
979[ 0.918208] SMB2: request_plug_irq: request_plug_irq:hw_detect=1 and report rc: 0
980[ 0.918222] SMB2: smb2_probe: QPNP SMB2 probed successfully usb:present=1 type=4 batt:present = 1 health = 1 charge = 3
981[ 0.918903] BQ: bq27541_parse_dt: di->is_mcl_verion=0
982[ 0.919800] BQ: bq27541_battery_probe: probe success battery exist
983[ 0.919994] FASTCHG: dash_probe: dash_probe
984[ 0.922199] FASTCHG: check_n76e_support: n76e not exist
985[ 0.922201] FASTCHG: check_enhance_support: enhance dash not exist
986[ 0.922203] FASTCHG: dash_probe: dash_probe success
987[ 0.922213] dash_adapter_init success
988[ 0.935403] bcl_peripheral:bcl_read_soc battery percentage read error:-61
989[ 0.935422] bcl_peripheral:bcl_read_soc battery percentage read error:-61
990[ 0.935434] bcl_peripheral:bcl_read_soc battery percentage read error:-61
991[ 0.936319] bcl_peripheral:bcl_read_soc battery percentage read error:-61
992[ 0.936466] 17d41000.qcom,cpucc:qcom,limits-dcvs@0 supply isens_vref not found, using dummy regulator
993[ 0.936491] msm_lmh_dcvs:limits_isens_vref_ldo_init Regulator:isens_vref settings read error:-22
994[ 0.940371] bcl_peripheral:bcl_read_soc battery percentage read error:-61
995[ 0.940444] SMBLIB: get_property_from_fg: no bms psy found
996[ 0.940449] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
997[ 0.940493] SMBLIB: get_property_from_fg: no bms psy found
998[ 0.940499] SMBLIB: get_prop_batt_capacity: Couldn't get capacity rc=-22
999[ 0.940612] SMBLIB: get_prop_chg_protect_status: failed to read usb_voltage rc=-517
1000[ 0.940622] SMBLIB: get_property_from_fg: no bms psy found
1001[ 0.940628] SMBLIB: get_prop_batt_temp: Couldn't get temperature rc=-22
1002[ 0.940705] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1003[ 0.944619] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1004[ 0.945402] bcl_peripheral:bcl_read_soc battery percentage read error:-61
1005[ 0.953700] device-mapper: uevent: version 1.0.3
1006[ 0.953766] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
1007[ 0.953865] device-mapper: req-crypt: dm-req-crypt successfully initalized.\x0a
1008[ 0.954047] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in devicetree
1009[ 0.954066] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1010[ 0.954069] bt_dt_parse_clk_info: clocks is not provided in device tree
1011[ 0.954142] CHRDEV "bt" major number 228 goes below the dynamic allocation range
1012[ 0.955079] haptics: qpnp_haptics_probe: qpnp_haptics_probe done
1013[ 0.955313] usbcore: registered new interface driver usbhid
1014[ 0.955314] usbhid: USB HID core driver
1015[ 0.955363] ashmem: initialized
1016[ 0.955366] CHRDEV "qcwlanstate" major number 227 goes below the dynamic allocation range
1017[ 0.955389] wlan_hdd_state wlan major(227) initialized
1018[ 0.955469] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
1019[ 0.956326] CHRDEV "seemplog" major number 225 goes below the dynamic allocation range
1020[ 0.956446] seemp: seemp_logk_init: SCM call failed with ret val = 0 -3 0
1021[ 0.956565] bimc-bwmon 1436400.qcom,cpu-bwmon: BW HWmon governor registered.
1022[ 0.956583] bimc-bwmon 114a000.qcom,llcc-bwmon: BW HWmon governor registered.
1023[ 0.956894] arm-memlat-mon soc:qcom,cpu0-memlat-mon: Memory Latency governor registered.
1024[ 0.956908] arm-memlat-mon soc:qcom,cpu4-memlat-mon: Memory Latency governor registered.
1025[ 0.956926] arm-memlat-mon soc:qcom,cpu0-l3lat-mon: Memory Latency governor registered.
1026[ 0.956940] arm-memlat-mon soc:qcom,cpu4-l3lat-mon: Memory Latency governor registered.
1027[ 0.956955] arm-memlat-mon soc:qcom,devfreq-compute: Compute governor registered.
1028[ 0.957390] register_client_adhoc:find path.src 1 dest 770
1029[ 0.957506] register_client_adhoc:Client handle 36 soc:qcom,cpubw
1030[ 0.957925] register_client_adhoc:find path.src 129 dest 512
1031[ 0.957967] register_client_adhoc:Client handle 37 soc:qcom,llccbw
1032[ 0.959544] register_client_adhoc:find path.src 1 dest 512
1033[ 0.959662] register_client_adhoc:Client handle 38 soc:qcom,memlat-cpu0
1034[ 0.959837] register_client_adhoc:find path.src 1 dest 512
1035[ 0.959951] register_client_adhoc:Client handle 39 soc:qcom,memlat-cpu4
1036[ 0.960136] register_client_adhoc:find path.src 139 dest 627
1037[ 0.960218] register_client_adhoc:Client handle 40 soc:qcom,snoc_cnoc_keepalive
1038[ 0.960339] register_client_adhoc:find path.src 1 dest 512
1039[ 0.960452] register_client_adhoc:Client handle 41 soc:qcom,mincpubw
1040[ 0.960700] register_client_adhoc:find path.src 26 dest 512
1041[ 0.960774] register_client_adhoc:Client handle 42 soc:qcom,gpubw
1042[ 0.961937] extcon_data->key3_gpio=126
1043[ 0.961943] extcon_data->key2_gpio=52
1044[ 0.961949] extcon_data->key1_gpio=24
1045[ 0.962713] coresight-tmc 6b09000.tmc: invalid cti data
1046[ 0.962721] coresight-tmc 6b09000.tmc: failed to get csr, defer probe
1047[ 0.962755] coresight-tmc 6048000.tmc: failed to get flush cti
1048[ 0.962761] coresight-tmc 6048000.tmc: failed to get reset cti
1049[ 0.962767] coresight-tmc 6048000.tmc: failed to get csr, defer probe
1050[ 0.962836] coresight-tmc 6047000.tmc: failed to get flush cti
1051[ 0.962841] coresight-tmc 6047000.tmc: failed to get reset cti
1052[ 0.962846] coresight-tmc 6047000.tmc: failed to get csr, defer probe
1053[ 0.964162] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
1054[ 0.964252] coresight-replicator-qcom 6b0a000.replicator: REPLICATOR 1.0 initialized
1055[ 0.964342] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
1056[ 0.967180] OF: graph: no port node found in /soc/cti@69e1000
1057[ 0.967221] OF: graph: no port node found in /soc/cti@69e4000
1058[ 0.967260] OF: graph: no port node found in /soc/cti@69e5000
1059[ 0.967299] OF: graph: no port node found in /soc/cti@6c09000
1060[ 0.967338] OF: graph: no port node found in /soc/cti@6c0a000
1061[ 0.967375] OF: graph: no port node found in /soc/cti@78e0000
1062[ 0.967414] OF: graph: no port node found in /soc/cti@78f0000
1063[ 0.967454] OF: graph: no port node found in /soc/cti@7900000
1064[ 0.967492] OF: graph: no port node found in /soc/cti@6010000
1065[ 0.967528] OF: graph: no port node found in /soc/cti@6011000
1066[ 0.967589] OF: graph: no port node found in /soc/cti@6012000
1067[ 0.967627] OF: graph: no port node found in /soc/cti@6013000
1068[ 0.967666] OF: graph: no port node found in /soc/cti@6014000
1069[ 0.967704] OF: graph: no port node found in /soc/cti@6015000
1070[ 0.967741] OF: graph: no port node found in /soc/cti@6016000
1071[ 0.967778] OF: graph: no port node found in /soc/cti@6017000
1072[ 0.967815] OF: graph: no port node found in /soc/cti@6018000
1073[ 0.967855] OF: graph: no port node found in /soc/cti@6019000
1074[ 0.967893] OF: graph: no port node found in /soc/cti@601a000
1075[ 0.967932] OF: graph: no port node found in /soc/cti@601b000
1076[ 0.967968] OF: graph: no port node found in /soc/cti@601c000
1077[ 0.968006] OF: graph: no port node found in /soc/cti@601d000
1078[ 0.968045] OF: graph: no port node found in /soc/cti@601e000
1079[ 0.968082] OF: graph: no port node found in /soc/cti@601f000
1080[ 0.968121] OF: graph: no port node found in /soc/cti@7020000
1081[ 0.968167] OF: graph: no port node found in /soc/cti@7120000
1082[ 0.968210] OF: graph: no port node found in /soc/cti@7220000
1083[ 0.968253] OF: graph: no port node found in /soc/cti@7320000
1084[ 0.968295] OF: graph: no port node found in /soc/cti@7420000
1085[ 0.968340] OF: graph: no port node found in /soc/cti@7520000
1086[ 0.968384] OF: graph: no port node found in /soc/cti@7620000
1087[ 0.968430] OF: graph: no port node found in /soc/cti@7720000
1088[ 0.968478] OF: graph: no port node found in /soc/cti@6b04000
1089[ 0.968588] OF: graph: no port node found in /soc/csr@6001000
1090[ 0.968613] coresight-csr 6001000.csr: CSR initialized: coresight-csr
1091[ 0.968620] OF: graph: no port node found in /soc/csr@6b0e000
1092[ 0.968643] coresight-csr 6b0e000.csr: CSR initialized: coresight-swao-csr
1093[ 0.968777] OF: graph: no port node found in /soc/hwevent@0x014066f0
1094[ 0.968803] coresight-hwevent 14066f0.hwevent: Hardware Event driver initialized
1095[ 0.968944] coresight-dummy soc:dummy_sink: Dummy device initialized
1096[ 0.969014] coresight-dummy soc:spss_etm0: Dummy device initialized
1097[ 0.969158] CHRDEV "esoc" major number 224 goes below the dynamic allocation range
1098[ 0.969401] CHRDEV "sensors" major number 223 goes below the dynamic allocation range
1099[ 0.969524] usbcore: registered new interface driver snd-usb-audio
1100[ 0.977737] msm-cdc-pinctrl soc:msm_cdc_pinctrl@49: msm_cdc_pinctrl_probe: Cannot get cdc gpio pinctrl:-19
1101[ 0.978226] tfa98xx_i2c_init(): TFA98XX driver version v6.5.2
1102[ 0.978282] tfa98xx_i2c_probe(): addr=0x34
1103[ 0.978310] tfa98xx 2-0034: No IRQ GPIO provided.
1104[ 0.980581] tfa98xx_i2c_probe(): TFA9894 detected
1105[ 0.980594] tfa98xx 2-0034: Skipping IRQ registration
1106[ 0.980613] tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
1107[ 0.980640] fsa4480 driver fsa4480_i2c_init
1108[ 0.980656] fsa4480_i2c_probe addr=0x42
1109[ 0.980757] i2c_geni 89c000.i2c: i2c error :-107
1110[ 1.000116] i2c_geni 89c000.i2c: i2c error :-107
1111[ 1.020023] fsa4480 3-0042: read transfer error -107
1112[ 1.020028] fsa4480 read device id error
1113[ 1.020035] fsa4480: probe of 3-0042 failed with error -22
1114[ 1.020541] CHRDEV "avtimer" major number 222 goes below the dynamic allocation range
1115[ 1.021051] apr_probe: Unable to create ipc log context
1116[ 1.021216] CHRDEV "wcd-dsp-glink" major number 221 goes below the dynamic allocation range
1117[ 1.021550] GACT probability NOT on
1118[ 1.021560] Mirror/redirect action on
1119[ 1.021565] u32 classifier
1120[ 1.021566] Actions configured
1121[ 1.021570] Netfilter messages via NETLINK v0.30.
1122[ 1.021678] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
1123[ 1.021734] ctnetlink v0.93: registering with nfnetlink.
1124[ 1.021856] xt_time: kernel timezone is -0000
1125[ 1.021894] gre: GRE over IPv4 demultiplexor driver
1126[ 1.021895] IPv4 over IPsec tunneling driver
1127[ 1.022145] ip_tables: (C) 2000-2006 Netfilter Core Team
1128[ 1.022213] arp_tables: arp_tables: (C) 2002 David S. Miller
1129[ 1.022371] Initializing XFRM netlink socket
1130[ 1.022378] IPsec XFRM device driver
1131[ 1.022444] NET: Registered protocol family 10
1132[ 1.022813] mip6: Mobile IPv6
1133[ 1.022819] ip6_tables: (C) 2000-2006 Netfilter Core Team
1134[ 1.023072] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1135[ 1.023261] NET: Registered protocol family 17
1136[ 1.023266] NET: Registered protocol family 15
1137[ 1.023273] Ebtables v2.0 registered
1138[ 1.023291] l2tp_core: L2TP core driver, V2.0
1139[ 1.023294] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1140[ 1.023295] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1141[ 1.023301] l2tp_netlink: L2TP netlink interface
1142[ 1.023313] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1143[ 1.023313] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1144[ 1.023541] NET: Registered protocol family 27
1145[ 1.023563] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
1146[ 1.024026] actuator_regulator: Failed to create debugfs directory
1147[ 1.026722] minidump-id not found for adsp
1148[ 1.026800] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
1149[ 1.028030] minidump-id not found for slpi
1150[ 1.028083] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
1151[ 1.028254] minidump-id not found for cdsp
1152[ 1.028305] subsys-pil-tz 8300000.qcom,turing: for cdsp segments only will be dumped.
1153[ 1.028529] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
1154[ 1.028598] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node mba_region@0x96500000
1155[ 1.028730] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1156[ 1.028744] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
1157[ 1.028871] msm-usb-ssphy-qmp 88e8000.ssphy: failed to get phandle for msm_ssphy_qmp
1158[ 1.029575] Force USB running as High speed
1159[ 1.030349] dwc3 a600000.dwc3: Error getting ipc_log_ctxt
1160[ 1.030469] register_client_adhoc:find path.src 61 dest 512
1161[ 1.030660] register_client_adhoc:find path.src 61 dest 676
1162[ 1.030771] register_client_adhoc:find path.src 1 dest 583
1163[ 1.030894] register_client_adhoc:Client handle 43 usb0
1164[ 1.030977] Invalid index Defaulting curr to 0
1165[ 1.031159] msm-dwc3 a600000.ssusb: Not attached
1166[ 1.031868] usbpd usbpd0: typec mode:6 present:1 type:4 orientation:2
1167[ 1.031877] usbpd usbpd0: Type-C Source (default) connected
1168[ 1.032018] FG: fg_parse_dt: use_external_fg=1
1169[ 1.037525] spmi spmi-0: cleanup_irq apid=219 sid=0x2 per=0x40 irq=1
1170[ 1.038597] spmi spmi-0: cleanup_irq apid=220 sid=0x2 per=0x41 irq=6
1171[ 1.039736] qcom,fg-gen3 c440000.qcom,spmi:qcom,pmi8998@2:qpnp,fg: thermal_zone_of_sensor_register() failed rc:-19
1172[ 1.041306] FG: fg_psy_get_property: unsupported property 25
1173[ 1.041346] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1174[ 1.042673] FG: fg_get_time_to_empty: Error in getting capacity, rc=-16
1175[ 1.042765] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1176[ 1.042873] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1177[ 1.042983] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1178[ 1.043077] FG: fg_psy_get_property: unsupported property 1
1179[ 1.043281] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1180[ 1.130031] synaptics,s3320: after on cpu [0]
1181[ 1.130042] synaptics,s3320: synaptics_ts_probe is called
1182[ 1.130068] synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
1183[ 1.130085] synaptics,s3320: synaptics,tx-rx-num is 15 30
1184[ 1.130098] synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
1185[ 1.130140] synaptics,s3320: synaptics_parse_dts: avdd current = 20000
1186[ 1.130211] synaptics,s3320: synaptics_parse_dts:avdd_vmin=3008000,avdd_vmax=3008000
1187[ 1.130308] 4-0020 supply vcc_i2c_1v8 not found, using dummy regulator
1188[ 1.130342] synaptics,s3320: synaptics_parse_dts: Failed to get regulator vdd current
1189[ 1.130359] synaptics,s3320: synaptics_parse_dts: Failed to get regulator vdd voltage
1190[ 1.281014] synaptics,s3320: F12_2D_QUERY_BASE = 4a \x0a \x09\x09\x09F12_2D_CMD_BASE = 0 \x0a\x09\x09\x09F12_2D_CTRL_BASE\x09= 13 \x0a\x09\x09\x09F12_2D_DATA_BASE\x09= 8 \x0a\x09\x09\x09
1191[ 1.281686] synaptics,s3320: F34_FLASH_QUERY_BASE = 23 \x0a\x09\x09\x09F34_FLASH_CMD_BASE\x09= 0 \x0a\x09\x09\x09F34_FLASH_CTRL_BASE\x09= c \x0a\x09\x09\x09F34_FLASH_DATA_BASE\x09= 0 \x0a\x09\x09\x09
1192[ 1.282682] synaptics,s3320: F54_QUERY_BASE = 43 \x0a\x09\x09\x09F54_CMD_BASE = 42 \x0a\x09\x09\x09F54_CTRL_BASE\x09= e \x0a\x09\x09\x09F54_DATA_BASE\x09= 0 \x0a\x09\x09\x09
1193[ 1.283101] synaptics,s3320: before fw update bootloader_mode[0x0]
1194[ 1.284605] synaptics,s3320: CURRENT_FIRMWARE_ID = 0x4544303137303148
1195[ 1.287163] synaptics,s3320: max_x = 1080,max_y = 2340; max_x_ic = 1079,max_y_ic = 2339
1196[ 1.288123] synaptics,s3320: synaptics_soft_reset !!!
1197[ 1.390428] synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x67 !
1198[ 1.390868] input: synaptics,s3320 as /devices/platform/soc/a90000.i2c/i2c-4/4-0020/input/input2
1199[ 1.440286] coresight-tmc 6b09000.tmc: invalid cti data
1200[ 1.440430] CHRDEV "byte-cntr" major number 220 goes below the dynamic allocation range
1201[ 1.440458] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006064000
1202[ 1.440464] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006064000
1203[ 1.440473] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006064000
1204[ 1.440480] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006064000
1205[ 1.440487] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006064000
1206[ 1.440493] sps:BAM 0x0000000006064000 is registered.
1207[ 1.440754] CHRDEV "6002000.stm" major number 219 goes below the dynamic allocation range
1208[ 1.440812] coresight-stm 6002000.stm: STM32 initialized
1209[ 1.441832] register_client_adhoc:find path.src 61 dest 512
1210[ 1.441992] register_client_adhoc:find path.src 61 dest 676
1211[ 1.442100] register_client_adhoc:find path.src 1 dest 583
1212[ 1.442210] register_client_adhoc:Client handle 43 usb0
1213[ 1.442764] registered taskstats version 1
1214[ 1.444519] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
1215[ 1.450031] synaptics,s3320: synaptic:ts->irq is 378
1216[ 1.460290] spss_utils [spss_init]: spss-utils driver Ver 2.0 30-Mar-2017.
1217[ 1.462845] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 34
1218[ 1.463171] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 35
1219[ 1.463391] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 36
1220[ 1.463608] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 37
1221[ 1.463824] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 38
1222[ 1.464039] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 39
1223[ 1.464257] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 40
1224[ 1.464475] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 41
1225[ 1.464688] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 42
1226[ 1.465325] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 43
1227[ 1.465397] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
1228[ 1.465422] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 44
1229[ 1.465634] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 45
1230[ 1.466236] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
1231[ 1.466245] CHRDEV "adsprpc-smd" major number 218 goes below the dynamic allocation range
1232[ 1.466596] ngd_msm_ctrl 171c0000.slim: error creating ipc_logging context
1233[ 1.466646] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 46
1234[ 1.467690] ngd_msm_ctrl 17240000.slim: error creating ipc_logging context
1235[ 1.467731] iommu: Adding device 17240000.slim:qcom,iommu_slim_ctrl_cb to group 47
1236[ 1.469573] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input3
1237[ 1.469936] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 1970-09-15 17:01:00 UTC (22266060)
1238[ 1.470517] lpm_levels: register_cluster_lpm_stats()
1239[ 1.470593] lpm_levels: register_cluster_lpm_stats()
1240[ 1.470877] CHRDEV "rmi" major number 217 goes below the dynamic allocation range
1241[ 1.470941] synaptics,s3320: synaptics_ts_probe 3203: normal end
1242[ 1.473230] rmnet_ipa3 started initialization
1243[ 1.473509] RNDIS_IPA module is loaded.
1244[ 1.474848] msm_bus_late_init: Remove handoff bw requests
1245[ 1.475418] actuator_regulator: Failed to create debugfs directory
1246[ 1.475446] ufs_card_gdsc: disabling
1247[ 1.475497] actuator_regulator: disabling
1248[ 1.475498] actuator_regulator: disabling
1249[ 1.475503] ext_5v_boost: disabling
1250[ 1.475505] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1251[ 1.475604] ALSA device list:
1252[ 1.475605] No soundcards found.
1253[ 1.476255] Freeing unused kernel memory: 3456K
1254[ 1.491276] EXT4-fs (sda14): mounted filesystem without journal. Opts: (null)
1255[ 1.493507] EXT4-fs (sde44): mounted filesystem without journal. Opts: (null)
1256[ 1.498074] EXT4-fs (sda2): recovery complete
1257[ 1.498381] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
1258[ 1.510503] of_batterydata_get_best_profile: OP_3700mAh found
1259[ 1.510813] FG: is_profile_load_required: Garbage value in profile integrity word: 0xb
1260[ 1.511916] FG: __fg_restart: Error in getting capacity, rc=-16
1261[ 1.511929] FG: profile_load_work: Error in restarting FG, rc=-16
1262[ 1.511962] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1263[ 1.928557] BQ: bq27541_hw_config: DEVICE_BQ27411
1264[ 1.930223] BQ: check_df_version: DEVICE DF:177
1265[ 1.930224] BQ: bq27541_hw_config: DEVICE_TYPE is 0x421, FIRMWARE_VERSION is 0x109
1266[ 1.930225] BQ: bq27541_hw_config: Complete bq27541 configuration 0x238A
1267[ 2.196822] init: init first stage started!
1268[ 2.198404] init: Using Android DT directory /proc/device-tree/firmware/android/
1269[ 2.198792] init: [libfs_mgr]ReadDefaultFstab(): failed to find device default fstab
1270[ 2.341603] BQ: bq27541_battery_soc: bq27541_battery_soc = 68
1271[ 2.341642] SMBLIB: load_data: stored_soc[0x88], shutdown_soc[68]
1272[ 2.341644] BQ: fg_soc_calibrate: soc=68, soc_load=68
1273[ 2.551435] FG: fg_psy_get_property: unsupported property 1
1274[ 2.581530] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/soc/1d84000.ufshc/by-name/vendor_b
1275[ 2.581578] init: [libfs_mgr]Filesystem on /dev/block/platform/soc/1d84000.ufshc/by-name/vendor_b was not cleanly shutdown; state flags: 0x0, incompat feature flags: 0x42
1276[ 2.581816] init: EXT4 fs_mgr_check_data_magic_num block_count:257987
1277[ 2.582009] EXT4-fs (sde44): Ignoring removed nomblk_io_submit option
1278[ 2.583068] EXT4-fs (sde44): warning: mounting unchecked fs, running e2fsck is recommended
1279[ 2.583569] EXT4-fs (sde44): mounted filesystem without journal. Opts: errors=remount-ro,nomblk_io_submit
1280[ 2.583588] init: [libfs_mgr]check_fs(): mount(/dev/block/platform/soc/1d84000.ufshc/by-name/vendor_b,/vendor,ext4)=0: Success
1281[ 2.621422] init: [libfs_mgr]check_fs(): unmount(/vendor) succeeded
1282[ 2.621470] init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/sde44
1283[ 2.621475] init: [libfs_mgr]Running /system/bin/e2fsck on /dev/block/platform/soc/1d84000.ufshc/by-name/vendor_b
1284[ 2.624179] e2fsck: executing /system/bin/e2fsck failed: No such file or directory\x0a
1285[ 2.624183] e2fsck: e2fsck terminated by exit(255)\x0a
1286[ 2.625535] EXT4-fs (sde44): mounted filesystem without journal. Opts: barrier=1,discard
1287[ 2.626275] init: 4 output lines suppressed due to ratelimiting
1288[ 2.641397] init: Loading SELinux policy
1289[ 2.643500] selinux: SELinux: op_load_policy default\x0a
1290[ 2.645526] SELinux: 65536 avtab hash slots, 283102 rules.
1291[ 2.679584] SELinux: 65536 avtab hash slots, 283102 rules.
1292[ 2.679598] SELinux: 1 users, 4 roles, 2230 types, 0 bools, 1 sens, 1024 cats
1293[ 2.679602] SELinux: 97 classes, 283102 rules
1294[ 2.680856] SELinux: Permission nlmsg_readpriv in class netlink_route_socket not defined in policy.
1295[ 2.680910] SELinux: the above unknown classes and permissions will be denied
1296[ 2.680917] SELinux: Completing initialization.
1297[ 2.680917] SELinux: Setting up existing superblocks.
1298[ 2.752977] selinux: SELinux: Loaded policy from /sbin/.se\x0a
1299[ 2.794980] selinux: SELinux: Loaded file_contexts\x0a
1300[ 2.809405] init: init second stage started!
1301[ 2.822253] init: Using Android DT directory /proc/device-tree/firmware/android/
1302[ 2.822999] init: not in ftm_at mode install wlan.ko
1303[ 2.824687] selinux: SELinux: Loaded file_contexts\x0a
1304[ 2.824694] init: Running restorecon...
1305[ 2.830701] init: Overriding previous 'ro.' property 'ro.build.user':'OnePlus' with new value 'jenkins'
1306[ 2.830714] init: Overriding previous 'ro.' property 'ro.build.flavor':'OnePlus6T-user' with new value 'fajita-user'
1307[ 2.831621] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:exported_secure_prop:s0 tclass=property_service permissive=0\x0a
1308[ 2.831645] init: Do not have permissions to set 'ro.adb.secure' to '1' in property file '/vendor/default.prop': SELinux permission check failed
1309[ 2.832042] init: SkipProperty: ro.product.vendor.model: Try again
1310[ 2.834216] init: oem_property_main
1311[ 2.945390] ueventd: ueventd started!
1312[ 2.947164] selinux: SELinux: Loaded file_contexts\x0a
1313[ 2.947235] ueventd: Parsing file /ueventd.rc...
1314[ 2.948034] ueventd: Parsing file /vendor/ueventd.rc...
1315[ 2.948822] ueventd: /vendor/ueventd.rc: 168: /sys/ lines must have 5 entries
1316[ 2.949177] ueventd: Parsing file /odm/ueventd.rc...
1317[ 2.949186] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
1318[ 2.949194] ueventd: Parsing file /ueventd.qcom.rc...
1319[ 2.949199] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
1320[ 2.955167] apexd: Bootstrap subcommand detected
1321[ 2.960042] SMBLIB: op_rerun_apsd: OP Reruning APSD type
1322[ 3.080275] SMBLIB: smblib_get_apsd_result: APSD_DTC_STATUS_DONE_BIT is 0
1323[ 3.291385] FG: fg_psy_get_property: unsupported property 1
1324[ 3.426529] apexd: wait for '/dev/loop-control' took 465ms
1325[ 3.426560] apexd: Pre-allocated 9 loopback devices
1326[ 3.426570] apexd: Scanning /system/apex for embedded keys
1327[ 3.427360] apexd: Scanning /product/apex for embedded keys
1328[ 3.427370] apexd: ... does not exist. Skipping
1329[ 3.427376] apexd: Scanning /system/apex looking for APEX packages.
1330[ 3.427407] apexd: Found /system/apex/com.google.android.tzdata.apex
1331[ 3.573309] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
1332[ 3.573374] apexd: Successfully mounted package /system/apex/com.google.android.tzdata.apex on /apex/com.android.tzdata@291601900
1333[ 3.573863] apexd: Found /system/apex/com.google.android.media.apex
1334[ 3.694672] EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
1335[ 3.696196] apexd: 13 output lines suppressed due to ratelimiting
1336[ 4.314339] SMBLIB: smblib_handle_usb_source_change: APSD_STATUS=0x01
1337[ 4.314384] SMBLIB: op_charging_en: enable=1
1338[ 4.315701] SMBLIB: handle_batt_temp_normal: triggered
1339[ 4.315714] SMBLIB: set_chg_ibat_vbat_max: set ibatmax=1950 and set vbatmax=4400
1340[ 4.315732] SMBLIB: op_battery_temp_region_set: set temp_region=5
1341[ 4.315746] SMBLIB: smblib_handle_apsd_done: apsd result=0x1, name=SDP, psy_type=4
1342[ 4.316683] SMBLIB: smblib_handle_apsd_done: apsd done,current_now=-67
1343[ 4.869061] ueventd: Coldboot took 1.919 seconds
1344[ 5.041364] stune_assist: setting values for foreground: boost=0 prefer_idle=1
1345[ 5.041508] stune_assist: setting values for foreground: boost=0 prefer_idle=1
1346[ 5.041510] stune_assist: setting values for background: boost=0 prefer_idle=0
1347[ 5.041640] stune_assist: setting values for foreground: boost=0 prefer_idle=1
1348[ 5.041642] stune_assist: setting values for background: boost=0 prefer_idle=0
1349[ 5.041643] stune_assist: setting values for top-app: boost=1 prefer_idle=1
1350[ 5.041788] stune_assist: setting values for foreground: boost=0 prefer_idle=1
1351[ 5.041790] stune_assist: setting values for background: boost=0 prefer_idle=0
1352[ 5.041791] stune_assist: setting values for top-app: boost=1 prefer_idle=1
1353[ 5.049251] cpuset_assist: setting foreground to 0-3,6-7
1354[ 5.049765] cpuset_assist: setting background to 0-1
1355[ 5.050314] cpuset_assist: setting system-background to 0-3
1356[ 5.050831] cpuset_assist: setting restricted to 0-3
1357[ 5.051314] cpuset_assist: setting top-app to 0-7
1358[ 5.051800] cpuset_assist: setting audio-app to 0-3
1359[ 5.052280] cpuset_assist: setting display to 0-7
1360[ 5.054091] Registered swp emulation handler
1361[ 5.071039] cpuset_assist: setting camera-daemon to 0-3,6-7
1362[ 5.082128] logd.auditd: start
1363[ 5.082140] logd.klogd: 5082122028
1364[ 5.135271] init: wait for '/dev/block/platform/soc/1d84000.ufshc' took 0ms
1365[ 5.137263] init: mount_tempfs=0
1366[ 5.186669] F2FS-fs (sda17): Mounted with checkpoint version = 17e9ff61
1367[ 5.189951] EXT4-fs (sde37): mounted filesystem with ordered data mode. Opts: barrier=1
1368[ 5.203259] e2fsck: e2fsck 1.44.4 (18-Aug-2018)\x0a
1369[ 5.203309] e2fsck: /dev/block/bootdevice/by-name/persist is in use.\x0a
1370[ 5.203311] e2fsck: e2fsck: Cannot continue, aborting.\x0a
1371[ 5.203312] e2fsck: \x0a
1372[ 5.203314] e2fsck: \x0a
1373[ 5.203317] e2fsck: e2fsck terminated by exit(8)\x0a
1374[ 5.212193] zram0: detected capacity change from 0 to 1073741824
1375[ 5.223230] mkswap: Swapspace size: 1048572k, UUID=97c3db46-40e6-4933-9df8-8eae9890634f
1376[ 5.223633] Adding 1048572k swap on /dev/block/zram0. Priority:-1 extents:1 across:1048572k SS
1377[ 5.228095] EXT4-fs (sde59): mounted filesystem with ordered data mode. Opts:
1378[ 5.231377] EXT4-fs (sda7): recovery complete
1379[ 5.231619] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: barrier=1
1380[ 5.234589] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts:
1381[ 5.256698] vdc: Waited 0ms for vold
1382[ 5.293987] IPA smmu_info.s1_bypass_arr[AP]=1 smmu_info.fast_map=0
1383[ 5.294262] IPA smmu_info.s1_bypass_arr[WLAN]=1 smmu_info.fast_map=0
1384[ 5.294934] IPA smmu_info.s1_bypass_arr[UC]=1 smmu_info.fast_map=0
1385[ 5.296051] ipa ipa3_uc_state_check:284 uC interface not initialized
1386[ 5.296305] ipa ipa3_write:5191 not load FW again
1387[ 5.321107] EXT4-fs (loop2): mounted filesystem with ordered data mode. Opts:
1388[ 5.322843] ipa ipa3_ioctl:882 IPA not ready, waiting for init completion
1389[ 5.332402] vdc: Waited 0ms for vold
1390[ 5.353757] vdc: Waited 0ms for vold
1391[ 5.417750] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)"
1392[ 5.437687] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: loading from 0x000000008c400000 to 0x000000008c405000
1393[ 5.466386] apexd: Marking APEXd as starting
1394[ 5.467968] apexd: Scanning /system/apex for embedded keys
1395[ 5.468312] apexd: Found bundled key in package /system/apex/com.google.android.tzdata.apex
1396[ 5.468628] apexd: Found bundled key in package /system/apex/com.google.android.media.apex
1397[ 5.468732] apexd: Found bundled key in package /system/apex/com.android.resolv.apex
1398[ 5.468833] apexd: Found bundled key in package /system/apex/com.android.runtime.release.apex
1399[ 5.468935] apexd: Found bundled key in package /system/apex/com.android.apex.cts.shim.apex
1400[ 5.469031] apexd: Found bundled key in package /system/apex/com.google.android.conscrypt.apex
1401[ 5.469128] apexd: Found bundled key in package /system/apex/com.google.android.media.swcodec.apex
1402[ 5.469174] apexd: Scanning /product/apex for embedded keys
1403[ 5.471579] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: Brought out of reset
1404[ 5.471609] ipa ipa3_uc_state_check:284 uC interface not initialized
1405[ 5.471849] IPA FW loaded successfully
1406[ 5.472165] ipa ipa3_uc_state_check:284 uC interface not initialized
1407[ 5.472817] ipahal ipahal_init:1637 failed to create IPA regdump log, continue...
1408[ 5.472898] CHRDEV "ipaNatTable" major number 216 goes below the dynamic allocation range
1409[ 5.472949] ipa ipa3_set_resorce_groups_min_max_limits:5473 skip configuring ipa_rx_hps_clients from HLOS
1410[ 5.473080] gsi soc:qcom,msm_gsi: gsi_register_device:846 GSI irq is wake enabled 107
1411[ 5.475250] CHRDEV "ipa_tethering_bridge" major number 215 goes below the dynamic allocation range
1412[ 5.475416] rmnet_ipa3 started initialization
1413[ 5.475418] IPA SSR support = True
1414[ 5.475419] IPA ipa-loaduC = True
1415[ 5.475420] IPA SG support = True
1416[ 5.475421] IPA Napi Enable = True
1417[ 5.475422] using default for wan-rx-desc-size = 256
1418[ 5.475436] IPA driver initialization was successful.
1419[ 5.479930] CHRDEV "wwan_ioctl" major number 214 goes below the dynamic allocation range
1420[ 5.480273] rmnet_ipa completed initialization
1421[ 5.525629] ipa ipa3_uc_state_check:289 uC is not loaded
1422[ 5.603133] EXT4-fs (loop3): mounted filesystem without journal. Opts: (null)
1423[ 5.723172] EXT4-fs (loop4): mounted filesystem without journal. Opts: (null)
1424[ 5.852967] EXT4-fs (loop5): mounted filesystem without journal. Opts: (null)
1425[ 5.983563] EXT4-fs (loop6): mounted filesystem without journal. Opts: (null)
1426[ 6.010035] extcon_dev_work ,key[0]=1,key[1]=0,key[2]=1
1427[ 6.113113] EXT4-fs (loop7): mounted filesystem without journal. Opts: (null)
1428[ 6.222985] EXT4-fs (loop8): mounted filesystem without journal. Opts: (null)
1429[ 6.333087] EXT4-fs (loop9): mounted filesystem without journal. Opts: (null)
1430[ 6.356746] vdc: Waited 0ms for vold
1431[ 6.562859] logd: logdr: UID=0 GID=0 PID=670 n tail=0 logMask=19 pid=0 start=0ns timeout=0ns
1432[ 6.574143] logd: logdr: UID=0 GID=0 PID=673 b tail=0 logMask=19 pid=0 start=0ns timeout=0ns
1433[ 6.596980] SELinux: Context is not valid (left unmapped).
1434[ 6.765291] logd.daemon: reinit
1435[ 6.778124] update_verifier: Started with arg 1: nonencrypted
1436[ 6.781719] update_verifier: Booting slot 1: isSlotMarkedSuccessful=1
1437[ 6.781724] update_verifier: Leaving update_verifier.
1438[ 6.791344] subsys-restart: __subsystem_get(): Changing subsys fw_name to slpi
1439[ 6.796166] subsys-pil-tz 17300000.qcom,lpass: adsp: loading from 0x000000008c500000 to 0x000000008df00000
1440[ 6.796688] subsys-pil-tz 5c00000.qcom,ssc: slpi: loading from 0x0000000096700000 to 0x0000000097880000
1441[ 6.822772] subsys-pil-tz 8300000.qcom,turing: cdsp: loading from 0x0000000095d00000 to 0x0000000096500000
1442[ 6.974917] subsys-pil-tz 5c00000.qcom,ssc: slpi: Brought out of reset
1443[ 7.015699] subsys-pil-tz 5c00000.qcom,ssc: Subsystem error monitoring/handling services are up
1444[ 7.016147] 'opened /dev/sdsprpc-smd c 218 2'
1445[ 7.016222] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [dsps_IPCRTR]
1446[ 7.018986] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
1447[ 7.023450] subsys-pil-tz 5c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
1448[ 7.025266] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
1449[ 7.025286] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 3
1450[ 7.025322] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 3
1451[ 7.098838] subsys-pil-tz 17300000.qcom,lpass: adsp: Power/Clock ready interrupt received
1452[ 7.104522] subsys-pil-tz 8300000.qcom,turing: cdsp: Brought out of reset
1453[ 7.105275] subsys-pil-tz 17300000.qcom,lpass: adsp: Brought out of reset
1454[ 7.105297] subsys-pil-tz 17300000.qcom,lpass: Subsystem error monitoring/handling services are up
1455[ 7.113934] subsys-pil-tz 8300000.qcom,turing: Subsystem error monitoring/handling services are up
1456[ 7.120635] subsys-pil-tz 8300000.qcom,turing: cdsp: Power/Clock ready interrupt received
1457[ 7.121666] apr_tal_link_state_cb: edge[lpass] link state[0]
1458[ 7.128754] healthd: Unknown power supply type 'BMS'
1459[ 7.128794] healthd: Unknown power supply type 'Main'
1460[ 7.129012] healthd: BatteryCycleCountPath not found
1461[ 7.130486] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [lpass_IPCRTR]
1462[ 7.157277] healthd: battery l=68 v=3969 t=34.9 h=2 st=2 c=0 fc=0 chg=u
1463[ 7.157285] healthd: yfb '1'
1464[ 7.158120] synaptics,s3320: changer_write_func:ts->changer_connet = 1
1465[ 7.195375] dashd: dashd_main enterd
1466[ 7.195392] dashd: run /sbin/dashd ENGINE START!
1467[ 7.208250] FASTCHG: dash_dev_write: fw_ver_count=6392
1468[ 7.208869] dashd: THREAD is created!
1469[ 7.211980] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [cdsp_IPCRTR]
1470[ 7.215473] set USB configuration at boot init.usb.rc
1471[ 7.221948] dashd: type=USB, soc=68, temp=34, vbat=3969, ibat=0
1472[ 7.241950] Mass Storage Function, version: 2009/09/11
1473[ 7.241954] LUN: removable read only CD-ROM file: (no medium)
1474[ 7.251228] dashd: THREAD running
1475[ 7.251273] dashd: dash read
1476[ 7.269270] healthd: battery l=68 v=3969 t=34.9 h=2 st=2 c=0 fc=0 chg=u
1477[ 7.269542] file system registered
1478[ 7.276142] CHRDEV "msm_usb_bridge" major number 213 goes below the dynamic allocation range
1479[ 7.291860] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
1480[ 7.296847] rmt_storage:INFO:main: Done with init now waiting for messages!
1481[ 7.296920] diag: In diag_send_feature_mask_update, control channel is not open, p: 5, 0000000000000000
1482[ 7.296930] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 5
1483[ 7.298066] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 5
1484[ 7.300709] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
1485[ 7.300726] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
1486[ 7.304137] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
1487[ 7.308046] logd: logdr: UID=0 GID=0 PID=880 b tail=0 logMask=19 pid=0 start=0ns timeout=0ns
1488[ 7.308225] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
1489[ 7.311195] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
1490[ 7.314416] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
1491[ 7.319806] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and cdsp's SSCTL service
1492[ 7.320273] logd: logdr: UID=0 GID=0 PID=883 b tail=0 logMask=80 pid=0 start=0ns timeout=0ns
1493[ 7.321422] servloc: service_locator_svc_arrive: Connection established with the Service locator
1494[ 7.323026] servloc: init_service_locator: Service locator initialized
1495[ 7.326614] logd: logdr: UID=0 GID=0 PID=882 b tail=0 logMask=4 pid=0 start=0ns timeout=0ns
1496[ 7.336400] audio_notifer_reg_service: service PDR_ADSP is in use
1497[ 7.341316] service-notifier: root_service_service_arrive: Connection established between QMI handle and 74 service
1498[ 7.344261] QSEECOM: qseecom_load_app: App (soter64) does'nt exist, loading apps for first time
1499[ 7.344978] smartpa dts config is tfa98xx
1500[ 7.344985] smartpa_present
1501[ 7.351240] logd: logdr: UID=0 GID=0 PID=881 b tail=0 logMask=2 pid=0 start=0ns timeout=0ns
1502[ 7.357467] EXT4-fs (loop10): VFS: Can't find ext4 filesystem
1503[ 7.373607] QSEECOM: qseecom_load_app: App with id 2 (soter64) now loaded
1504[ 7.375948] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000017204000
1505[ 7.375964] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000017204000
1506[ 7.375973] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000017204000
1507[ 7.375978] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000017204000
1508[ 7.375985] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000017204000
1509[ 7.376032] sps:BAM 0x0000000017204000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:13
1510[ 7.376034] sps:BAM 0x0000000017204000 is registered.
1511[ 7.376095] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000017184000
1512[ 7.376103] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000017184000
1513[ 7.376108] sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000017184000
1514[ 7.376115] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000017184000
1515[ 7.376120] sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000017184000
1516[ 7.376150] sps:BAM 0x0000000017184000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:23
1517[ 7.376150] sps:BAM 0x0000000017184000 is registered.
1518[ 7.385511] healthd: battery l=68 v=3969 t=34.9 h=2 st=2 c=0 fc=0 chg=u
1519[ 7.462733] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: msm_init_wsa_dev: Max WSA devices is 0 for this target?
1520[ 7.462815] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: platform /soc/qcom,msm-pcm-voice not registered
1521[ 7.500106] slimbus sb-3: of_slim: invalid E-addr
1522[ 7.500108] slimbus sb-1: of_slim: invalid E-addr
1523[ 7.500262] wcd-slim tavil-slim-pgd: Platform data from device tree
1524[ 7.500690] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
1525[ 7.500834] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
1526[ 7.500953] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
1527[ 7.501053] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
1528[ 7.501139] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
1529[ 7.501234] wcd-slim tavil-slim-pgd: wcd9xxx_slim_probe: probing for wcd type: 4, name: tavil-slim-pgd
1530[ 7.502721] smartpa dts config is tfa98xx
1531[ 7.502734] smartpa_present
1532[ 7.507288] overlayfs: failed to resolve '/system/india/reserve': -2
1533[ 7.507895] overlayfs: failed to resolve '/system/india/overlay': -2
1534[ 7.508541] cpuset_assist: setting top-app to 0-7
1535[ 7.508852] cpuset_assist: setting audio-app to 0-3
1536[ 7.509118] cpuset_assist: setting foreground to 0-3,6-7
1537[ 7.509652] cpuset_assist: setting background to 0-1
1538[ 7.509898] cpuset_assist: setting system-background to 0-3
1539[ 7.510312] cpuset_assist: setting top-app to 0-7
1540[ 7.510589] cpuset_assist: setting foreground to 0-3,6-7
1541[ 7.511079] cpuset_assist: setting background to 0-1
1542[ 7.511365] cpuset_assist: setting system-background to 0-3
1543[ 7.511634] cpuset_assist: setting display to 0-7
1544[ 7.513109] synaptics,s3320: start update ******* fw_name:tp/fw_synaptics_18801.img,ts->manu_name:S3706B
1545[ 7.513127] synaptics,s3320: enter version 17819 update mode
1546[ 7.515755] synaptics,s3320: FW_ID:2852315--CONFIG_ID FW_NAME:tp/fw_synaptics_18801.img
1547[ 7.525239] synaptics,s3320_firmware: fwu_start_reflash: Start of reflash process
1548[ 7.525817] synaptics,s3320_firmware: fwu_go_nogo: Device firmware ID = 2852315
1549[ 7.525833] synaptics,s3320_firmware: fwu_go_nogo: Image firmware ID = 2852315
1550[ 7.527126] synaptics,s3320_firmware: fwu_go_nogo: No need to do reflash
1551[ 7.527489] synaptics,s3320_firmware: fwu_start_reflash: End of reflash process
1552[ 7.560273] slimbus:1 laddr:0xcf, EAPC:0x1:0x50
1553[ 7.560417] wcd-slim tavil-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
1554[ 7.560564] slimbus:1 laddr:0xce, EAPC:0x0:0x50
1555[ 7.563139] wcd-slim tavil-slim-pgd: wcd934x_get_cdc_info: wcd9xxx chip id major 0x108, minor 0x1
1556[ 7.563152] wcd9xxx_core_res_init: num_irqs = 32, num_irq_regs = 4
1557[ 7.590433] subsys-pil-tz soc:qcom,kgsl-hyp: a630_zap: loading from 0x000000008c415000 to 0x000000008c416000
1558[ 7.624267] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: msm_init_wsa_dev: Max WSA devices is 0 for this target?
1559[ 7.624348] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: platform /soc/qcom,msm-pcm-voice not registered
1560[ 7.624999] smartpa dts config is tfa98xx
1561[ 7.625007] smartpa_present
1562[ 7.643026] subsys-pil-tz soc:qcom,kgsl-hyp: a630_zap: Brought out of reset
1563[ 7.727516] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: msm_init_wsa_dev: Max WSA devices is 0 for this target?
1564[ 7.728110] tavil_codec tavil_codec: tavil_soc_codec_probe()
1565[ 7.732187] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: for wdsp segments only will be dumped.
1566[ 7.734057] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound tavil_codec (ops 0xffffff982e55e838)
1567[ 7.734520] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound spi0.0 (ops 0xffffff982e5643b8)
1568[ 7.734524] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound soc:qcom,glink-spi-xprt-wdsp (ops 0xffffff982e3f7978)
1569[ 7.737228] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia17 Mixer
1570[ 7.737248] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia17 Mixer
1571[ 7.737259] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia18 Mixer
1572[ 7.737266] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia18 Mixer
1573[ 7.737274] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia19 Mixer
1574[ 7.737282] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia19 Mixer
1575[ 7.737305] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia28 Mixer
1576[ 7.737313] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia28 Mixer
1577[ 7.737322] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> MultiMedia29 Mixer
1578[ 7.737329] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> MultiMedia29 Mixer
1579[ 7.737355] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia17 Mixer
1580[ 7.737363] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia17 Mixer
1581[ 7.737372] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia19 Mixer
1582[ 7.737380] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia19 Mixer
1583[ 7.737396] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia28 Mixer
1584[ 7.737404] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia28 Mixer
1585[ 7.737411] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for QUAT_MI2S_TX --> QUAT_MI2S_TX --> MultiMedia29 Mixer
1586[ 7.737418] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> MultiMedia29 Mixer
1587[ 7.741288] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM_UL28
1588[ 7.741301] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer -> direct -> MM_UL28
1589[ 7.741324] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM_UL29
1590[ 7.741331] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer -> direct -> MM_UL29
1591[ 7.742800] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for SLIM_6_RX
1592[ 7.742808] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIM_6_RX -> SLIM_6_RX -> AUDIO_REF_EC_UL1 MUX
1593[ 7.743142] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
1594[ 7.743150] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI_MI2S_TX -> PRI_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
1595[ 7.743171] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
1596[ 7.743178] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
1597[ 7.743199] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
1598[ 7.743206] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
1599[ 7.743223] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
1600[ 7.743230] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
1601[ 7.743248] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
1602[ 7.743255] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI_MI2S_TX -> PRI_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
1603[ 7.743275] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
1604[ 7.743282] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
1605[ 7.743303] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
1606[ 7.743310] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
1607[ 7.743326] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
1608[ 7.743333] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
1609[ 7.743379] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL28 MUX
1610[ 7.743386] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL28 MUX -> direct -> MM_UL28
1611[ 7.743409] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL29 MUX
1612[ 7.743416] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL29 MUX -> direct -> MM_UL29
1613[ 7.750389] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for TERT_MI2S_TX --> TERT_MI2S_TX --> VoLTE Stub Tx Mixer
1614[ 7.750403] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> VoLTE Stub Tx Mixer
1615[ 7.764004] spi_geni a80000.spi: tx_fifo 16 rx_fifo 16 tx_width 32
1616[ 7.847738] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2803 FW download done successfully
1617[ 7.881814] tfa98xx_probe():
1618[ 7.881952] tfa98xx_probe(): Container loading requested: 0
1619[ 7.882036] tfa98xx 2-0034: tfa98xx codec registered ()
1620[ 7.896550] msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
1621[ 7.902982] apr_tal_notify_state: Channel state[0]
1622[ 7.903329] tfa98xx_container_loaded(): loaded tfa98xx.cnt - size: 11385
1623[ 7.903356] tfa98xx_container_loaded(): 3_01
1624[ 7.903360] tfa98xx_container_loaded(): NXP
1625[ 7.903365] tfa98xx_container_loaded(): mono
1626[ 7.903369] tfa98xx_container_loaded(): TFA9894
1627[ 7.903373] tfa98xx_container_loaded(): 1 ndev
1628[ 7.903377] tfa98xx_container_loaded(): 5 nprof
1629[ 7.903932] tfa98xx_container_loaded(): Firmware init complete
1630[ 7.903942] tfa98xx_create_controls(): profile added [0]: MUSIC_48000
1631[ 7.903949] add_sr_to_profile(): added profile:samplerate = [0:48000] for mixer profile: MUSIC_48000
1632[ 7.903958] tfa98xx_create_controls(): profile added [1]: VOICE_48000
1633[ 7.903963] add_sr_to_profile(): added profile:samplerate = [1:48000] for mixer profile: VOICE_48000
1634[ 7.903970] tfa98xx_create_controls(): profile added [2]: MMITest_48000
1635[ 7.903975] add_sr_to_profile(): added profile:samplerate = [2:48000] for mixer profile: MMITest_48000
1636[ 7.903982] tfa98xx_create_controls(): profile added [3]: dsp_bypass_P
1637[ 7.903987] add_sr_to_profile(): added profile:samplerate = [3:48000] for mixer profile: dsp_bypass_P
1638[ 7.904784] tfa98xx 2-0034: tfa98xx_tfa_start enter
1639[ 7.904785] tfa_dev_start enter
1640[ 7.905112] Active_profile:NONE, next_profile:MUSIC_48000
1641[ 7.905305] Startup of device [P] is a coldstart
1642[ 7.910447] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: no sink widget found for SpkrLeft IN
1643[ 7.910465] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: Failed to add route SPK1 OUT -> direct -> SpkrLeft IN
1644[ 7.910520] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: no sink widget found for SpkrRight IN
1645[ 7.910528] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: ASoC: Failed to add route SPK2 OUT -> direct -> SpkrRight IN
1646[ 7.910546] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: wcd_mbhc_start: qcom,msm-mbhc-usbc-audio-supported in dt node is missing or false
1647[ 7.910548] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: wcd_mbhc_start: skipping USB c analog configuration
1648[ 7.926157] tfa cold boot patch
1649[ 7.928846] input: sdm845-tavil-snd-card Headset Jack as /devices/platform/soc/soc:qcom,msm-audio-apr/soc:qcom,msm-audio-apr:sound-tavil/sound/card0/input4
1650[ 7.928921] input: sdm845-tavil-snd-card Button Jack as /devices/platform/soc/soc:qcom,msm-audio-apr/soc:qcom,msm-audio-apr:sound-tavil/sound/card0/input5
1651[ 7.929531] sdm845-asoc-snd soc:qcom,msm-audio-apr:sound-tavil: Sound card sdm845-tavil-snd-card registered
1652[ 7.929622] property qcom,us-euro-gpios not detected in node /soc/qcom,msm-audio-apr/sound-tavil
1653[ 7.929636] msm_asoc_machine_probe: fsa4480_enable is false
1654[ 7.929643] msm_asoc_machine_probe usb_sw find
1655[ 7.930009] hp_sw_gpio of get gpio success
1656[ 7.930043] ldo_sw_gpio of get gpio success
1657[ 7.930123] msm_prepare_us_euro
1658[ 7.930129] setHpSwGpioPin hp_sw_gpio set to 1
1659[ 7.930290] msm_get_pinctrl: could not get mi2s_disable pinstate
1660[ 8.160032] BQ: bq27411_modify_soc_smooth_parameter: bq27411_modify_soc_smooth_parameter begin
1661[ 8.236134] BQ: unseal: bq27541 : i=0,bq27541_di->device_type=1
1662[ 8.236137] BQ: unseal: bq27541 failed
1663[ 8.499341] headset_imp_feature_get: get success!
1664[ 8.694535] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1665[ 8.700448] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
1666[ 8.700947] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
1667[ 8.750907] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1668[ 8.750957] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1669[ 8.751029] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1670[ 8.751068] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1671[ 8.751139] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1672[ 8.751177] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1673[ 8.849553] headset_imp_feature_get: get success!
1674[ 9.049403] synaptics,s3320: F12_2D_QUERY_BASE = 4a \x0a \x09\x09\x09F12_2D_CMD_BASE = 0 \x0a\x09\x09\x09F12_2D_CTRL_BASE\x09= 13 \x0a\x09\x09\x09F12_2D_DATA_BASE\x09= 8 \x0a\x09\x09\x09
1675[ 9.049998] synaptics,s3320: F34_FLASH_QUERY_BASE = 23 \x0a\x09\x09\x09F34_FLASH_CMD_BASE\x09= 0 \x0a\x09\x09\x09F34_FLASH_CTRL_BASE\x09= c \x0a\x09\x09\x09F34_FLASH_DATA_BASE\x09= 0 \x0a\x09\x09\x09
1676[ 9.050887] synaptics,s3320: F54_QUERY_BASE = 43 \x0a\x09\x09\x09F54_CMD_BASE = 42 \x0a\x09\x09\x09F54_CTRL_BASE\x09= e \x0a\x09\x09\x09F54_DATA_BASE\x09= 0 \x0a\x09\x09\x09
1677[ 9.052681] synaptics,s3320: max_x = 1080,max_y = 2340; max_x_ic = 1079,max_y_ic = 2339
1678[ 9.052894] synaptics,s3320: Firmware self check success
1679[ 9.053441] synaptics,s3320: CURRENT_FIRMWARE_ID 0x4544303137303148!
1680[ 9.055003] init: Command 'write /sys/bus/i2c/devices/4-0020/tp_fw_update 0' action=boot (/vendor/etc/init/hw/init.target.rc:256) took 1542ms and succeeded
1681[ 9.055256] init: processing action (boot) from (/system/etc/init/bootstat.rc:63)
1682[ 9.062807] boot_mode:
1683[ 9.065484] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1684[ 9.072441] core_get_license_status: cmdrsp_license_result.result = 0x15 for module 0x131ff
1685[ 9.073067] msm-ext-disp-audio-codec-rx soc:qcom,msm-ext-disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
1686[ 9.125609] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1687[ 9.125657] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1688[ 9.125731] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1689[ 9.125771] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1690[ 9.125844] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1691[ 9.125883] tfa98xx_info_vstep(): vsteps count: 1 [prof=0]
1692[ 9.140149] init: processing action (boot) from (/system/etc/init/dumpstate.rc:1)
1693[ 9.140947] init: Service 'vendor.qcom-usb-sh' (pid 925) exited with status 0
1694[ 9.141042] init: processing action (boot) from (/system/etc/init/gsid.rc:14)
1695[ 9.141309] init: starting service 'exec 16 (/system/bin/gsid run-startup-tasks)'...
1696[ 9.143380] init: processing action (boot) from (/system/etc/init/qvrd.rc:20)
1697[ 9.143704] init: Received control message 'start' for 'bootanim' from pid: 861 (/system/bin/surfaceflinger)
1698[ 9.143860] init: starting service 'bootanim'...
1699[ 9.145631] init: processing action (boot) from (/vendor/etc/init/netmgrd.rc:6)
1700[ 9.152754] set_dload_mode OFF
1701[ 9.155164] set_dload_mode ON
1702[ 9.179062] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
1703[ 9.183700] ipa-wan ipa3_ssr_notifier_cb:2732 IPA received MPSS BEFORE_POWERUP
1704[ 9.184235] ipa ipa3_uc_state_check:289 uC is not loaded
1705[ 9.184244] ipa-wan ipa3_ssr_notifier_cb:2744 IPA BEFORE_POWERUP handling is complete
1706[ 9.193113] ueventd: firmware: loading 'modem.mdt' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt'
1707[ 9.194162] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt took 1ms
1708[ 9.196013] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x000000008e000000 to 0x0000000095800000
1709[ 9.204870] ep0_open success!
1710[ 9.204881] read descriptors
1711[ 9.204887] read strings
1712[ 9.234194] ueventd: firmware: loading 'mba.mbn' for '/devices/platform/soc/4080000.qcom,mss/firmware/mba.mbn'
1713[ 9.237266] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/mba.mbn took 3ms
1714[ 9.251198] ueventd: firmware: loading 'msadp' for '/devices/platform/soc/4080000.qcom,mss/firmware/msadp'
1715[ 9.251696] ueventd: firmware: could not find firmware for msadp
1716[ 9.251889] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
1717[ 9.251904] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/msadp took 0ms
1718[ 9.251910] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x0000000096500000 to 0x0000000096600000
1719[ 9.329806] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
1720[ 9.350268] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 505 Sensor Addr: 0x1010100 sensor_id: 0x13 sensor_mask: 0x0
1721[ 9.358051] 'opened /dev/cdsprpc-smd c 218 3'
1722[ 9.361055] ueventd: firmware: loading 'modem.b02' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b02'
1723[ 9.362152] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b02 took 1ms
1724[ 9.364517] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 729 sensor id 0x13 matched
1725[ 9.364856] CAM_INFO: CAM-SENSOR: cam_sensor_match_id: 752 imx519 sensor_version: 0x10
1726[ 9.378262] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 764 sensor_id: 0x519, fuse_id:86b0519911211321
1727[ 9.378271] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 886 Probe Succees,slot:0,slave_addr:0x34,sensor_id:0x519
1728[ 9.384771] ueventd: firmware: loading 'modem.b03' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b03'
1729[ 9.390126] CAM_ERR: CAM-SENSOR: cam_sensor_driver_cmd: 1116 fuse_id:86b0519911211321
1730[ 9.489452] 'opened /dev/adsprpc-smd c 218 0'
1731[ 9.509417] QSEECOM: qseecom_load_app: App (dhsecapp) does'nt exist, loading apps for first time
1732[ 9.609020] QSEECOM: qseecom_load_app: App with id 3 (dhsecapp) now loaded
1733[ 9.630618] QSEECOM: qseecom_load_app: App (haventkn) does'nt exist, loading apps for first time
1734[ 9.670497] QSEECOM: qseecom_load_app: App with id 4 (haventkn) now loaded
1735[ 9.680901] subsys-restart: __subsystem_get(): Changing subsys fw_name to venus
1736[ 9.708832] subsys-pil-tz aae0000.qcom,venus: venus: loading from 0x0000000095800000 to 0x0000000095d00000
1737[ 9.756694] subsys-pil-tz aae0000.qcom,venus: venus: Brought out of reset
1738[ 9.868687] logd.daemon: reinit
1739[ 9.889888] capability: warning: `msm_irqbalance' uses 32-bit capabilities (legacy support in use)
1740[ 9.915552] android_work: did not send uevent (0 0 0000000000000000)
1741[ 9.928408] set_dload_mode OFF
1742[ 9.933035] set_dload_mode ON
1743[ 9.935569] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ipsec_test
1744[ 9.957534] android_work: did not send uevent (0 0 0000000000000000)
1745[ 10.029638] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ipsec_test
1746[ 10.046072] ep0_open success!
1747[ 10.046088] read descriptors
1748[ 10.046096] read strings
1749[ 10.046814] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 505 Sensor Addr: 0x0 sensor_id: 0x0 sensor_mask: 0x0
1750[ 10.050138] android_work: did not send uevent (0 0 0000000000000000)
1751[ 10.061686] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 732 sensor id register is 0x0
1752[ 10.061794] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 886 Probe Succees,slot:2,slave_addr:0x20,sensor_id:0x371
1753[ 10.080090] synap rmidev_create_attr
1754[ 10.123327] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 505 Sensor Addr: 0x1010100 sensor_id: 0x61 sensor_mask: 0x0
1755[ 10.134115] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 726 sensor id 0x13 does not match 0x61
1756[ 10.170037] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 131 cam_sensor_subdev_ioctl failed
1757[ 10.170308] CAM_ERR: CAM-SENSOR: cam_sensor_update_id_info: 505 Sensor Addr: 0x1010100 sensor_id: 0x13 sensor_mask: 0x0
1758[ 10.181075] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 729 sensor id 0x13 matched
1759[ 10.181176] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 886 Probe Succees,slot:1,slave_addr:0x20,sensor_id:0x376
1760[ 10.341053] SMBLIB: notify_usb_enumeration_function: status=1
1761[ 10.350404] CAM_ERR: CAM-EEPROM: cam_eeprom_read_memory: 159 OIS module 0x24
1762[ 10.357854] android_work: sent uevent USB_STATE=CONNECTED
1763[ 10.361271] configfs-gadget gadget: high-speed config #1: b
1764[ 10.361296] usb_gadget_vbus_draw USB setting current is 500mA
1765[ 10.361550] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
1766[ 10.361552] SMBLIB: smblib_set_prop_sdp_current_max: set usb current_max=500000
1767[ 10.361674] android_work: sent uevent USB_STATE=CONFIGURED
1768[ 10.554980] msm-dsi-panel:[dsi_panel_set_backlight:742] ---backlight level = 200---
1769[ 10.560063] SMBLIB: check_non_standard_charger_work: chk_non_std_chger,usb_enum_status
1770[ 10.664889] FASTCHG: dashchg_fw_check: result=success
1771[ 10.664893] FASTCHG: reset_mcu_and_request_irq:
1772[ 10.923490] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
1773[ 10.976420] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
1774[ 10.980279] ipa-wan ipa3_ssr_notifier_cb:2748 ipa3_ssr_notifier_cb:2748 IPA received MPSS AFTER_POWERUP
1775[ 10.980284] ipa-wan ipa3_ssr_notifier_cb:2753 IPA AFTER_POWERUP handling is complete
1776[ 10.980334] apr_tal_link_state_cb: edge[mpss] link state[0]
1777[ 10.980571] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [mpss_IPCRTR]
1778[ 10.983987] service-notifier: root_service_service_arrive: Connection established between QMI handle and 180 service
1779[ 10.984096] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
1780[ 10.984201] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs1!
1781[ 10.984817] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs2!
1782[ 10.985356] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsg!
1783[ 10.985685] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsc!
1784[ 10.987148] rmt_storage:INFO:rmt_storage_alloc_buff_cb: Received req_size: 0! avail: 2097152
1785[ 10.987691] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /oem/nvbk/static
1786[ 10.987774] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=0, size=512]for /oem/nvbk/static!
1787[ 10.988052] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /oem/nvbk/static!
1788[ 10.988398] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /oem/nvbk/static
1789[ 11.170785] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
1790[ 11.171062] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 0
1791[ 11.280478] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
1792[ 11.280536] ipa-wan ipa3_handle_indication_req:152 not send indication
1793[ 11.286015] ipa ipa3_uc_wdi_event_log_info_handler:364 WDI stats ofst=0x47130
1794[ 11.286032] ipa ipa3_uc_ntn_event_log_info_handler:39 NTN feature missing 0x9
1795[ 11.289260] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
1796[ 11.321996] IPC_RTR: process_new_server_msg: Server 00001002 create rejected, version = 0
1797[ 11.372836] healthd: battery l=68 v=3932 t=34.8 h=2 st=2 c=565 fc=0 chg=u
1798[ 11.613209] healthd: battery l=68 v=3948 t=34.8 h=2 st=2 c=402 fc=0 chg=u
1799[ 11.621514] healthd: battery l=68 v=3948 t=34.8 h=2 st=2 c=402 fc=0 chg=u
1800[ 11.873348] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
1801[ 11.880990] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
1802[ 12.044392] service-notifier: root_service_service_ind_cb: Indication received from msm/modem/wlan_pd, state: 0x1fffffff, trans-id: 1
1803[ 12.046012] service-notifier: send_ind_ack: Indication ACKed for transid 1, service msm/modem/wlan_pd, instance 180!
1804[ 12.046651] icnss: QMI Server Connected: state: 0x981
1805[ 12.101530] IPC_RTR: process_new_server_msg: Server 00001003 create rejected, version = 0
1806[ 12.396975] acc_open
1807[ 12.396983] acc_release
1808[ 12.412848] ip_local_port_range: prefer different parity for start/end values.
1809[ 12.550832] gf_spi: Found
1810[ 12.550839] gf_spi: Succeed to open device. irq = 374
1811[ 12.550865] gf_spi: Sensor has already powered-on.
1812[ 12.550868] gf_spi: gf_ioctl GF_IOC_RESET.
1813[ 12.572140] QSEECOM: qseecom_load_app: App (gfp9508) does'nt exist, loading apps for first time
1814[ 12.658305] QSEECOM: qseecom_load_app: App with id 5 (gfp9508) now loaded
1815[ 12.678263] gf_spi: IRQ has been enabled.
1816[ 12.704225] gf_spi: Sensor has already powered-on.
1817[ 12.756739] synaptics,s3320: tp_gesture_write_func write argc1[0x80],argc2[0x0]
1818[ 12.757454] synaptics,s3320: key_disable_write_func key_back:0 key_appselect:0
1819[ 12.808431] ipa ipa3_assign_policy:2882 get close-by 8192
1820[ 12.808446] ipa ipa3_assign_policy:2888 set rx_buff_sz 7680
1821[ 12.808451] ipa ipa3_assign_policy:2910 set aggr_limit 6
1822[ 12.880465] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data0) register to IPA
1823[ 12.899176] ---- power off ----
1824[ 12.981301] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data1) register to IPA
1825[ 13.098855] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data2) register to IPA
1826[ 13.160492] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data3) register to IPA
1827[ 13.240658] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data4) register to IPA
1828[ 13.282079] Wifi Turning On from UI
1829[ 13.282084] wlan: Loading driver v5.2.03.22Q; 2020-03-23T18:43:22Z; cld:I2848230d49; cmn:I2848230d49; ()
1830[ 13.282110] qdf_print_ctrl_register: Allocated print control object 0
1831[ 13.286458] ipa ipa3_uc_reg_rdyCB:1774 bad parm. inout= (null)
1832[ 13.286475] wlan: driver loaded
1833[ 13.326016] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data5) register to IPA
1834[ 13.401772] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data6) register to IPA
1835[ 13.501093] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data7) register to IPA
1836[ 13.580136] diag: In diag_ioctl_set_buffering_mode, invalid peripheral = -22
1837[ 13.629537] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data8) register to IPA
1838[ 13.662888] healthd: battery l=68 v=3928 t=34.8 h=2 st=2 c=613 fc=0 chg=u
1839[ 13.681874] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data9) register to IPA
1840[ 13.798021] ipa-wan ipa3_wwan_ioctl:1716 dev(rmnet_data10) register to IPA
1841[ 14.964080] init: processing action (vendor.ims.DATA_DAEMON_STATUS=1) from (/vendor/etc/init/hw/init.target.rc:450)
1842[ 14.966283] init: Sending signal 9 to service 'vendor.ims_rtp_daemon' (pid 1074) process group...
1843[ 14.972292] libprocessgroup: Successfully killed process cgroup uid 1001 pid 1074 in 5ms
1844[ 14.973058] init: Service 'vendor.ims_rtp_daemon' (pid 1074) received signal 9
1845[ 14.973491] init: processing action (vendor.ims.DATA_DAEMON_STATUS=1) from (/vendor/etc/init/ims_rtp_daemon.rc:13)
1846[ 14.976993] init: starting service 'vendor.ims_rtp_daemon'...
1847[ 15.002142] init: Received control message 'stop' for 'vendor.imsrcsservice' from pid: 1356 (/system/vendor/bin/imsdatadaemon)
1848[ 15.002160] init: Sending signal 9 to service 'vendor.imsrcsservice' (pid 1071) process group...
1849[ 15.007478] libprocessgroup: Successfully killed process cgroup uid 1001 pid 1071 in 5ms
1850[ 15.008528] init: Service 'vendor.imsrcsservice' (pid 1071) received signal 9
1851[ 15.260291] icnss: WLAN FW is ready: 0xd87
1852[ 15.260390] qcom,rpmh-regulator soc:rpmh-regulator-ldoa7: TCS Busy, retrying RPMH message send
1853[ 15.264505] ueventd: firmware: loading 'wlan/qca_cld/WCNSS_qcom_cfg.ini' for '/devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini'
1854[ 15.266562] ueventd: loading /devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!WCNSS_qcom_cfg.ini took 2ms
1855[ 15.267959] ipa ipa3_uc_reg_rdyCB:1774 bad parm. inout= (null)
1856[ 15.329544] IPC_RTR: process_new_server_msg: Server 00001003 create rejected, version = 0
1857[ 15.360321] null_get_capability: 1518: SPECTRAL : get_capability not registered
1858[ 15.360324] target_if_pdev_spectral_init: 1992: HAL_CAP_PHYDIAG : Capable
1859[ 15.360326] null_get_capability: 1518: SPECTRAL : get_capability not registered
1860[ 15.360326] target_if_pdev_spectral_init: 1996: HAL_CAP_RADAR : Capable
1861[ 15.360327] null_get_capability: 1518: SPECTRAL : get_capability not registered
1862[ 15.360328] target_if_pdev_spectral_init: 2001: HAL_CAP_SPECTRAL_SCAN : Capable
1863[ 15.360329] null_get_tsf64: 1506: SPECTRAL : get_tsf64 not registered
1864[ 15.478684] cnss_utils: WLAN MAC address is not set, type 0
1865[ 15.481106] ueventd: firmware: loading 'wlan/qca_cld/wlan_mac.bin' for '/devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!wlan_mac.bin'
1866[ 15.481489] ueventd: loading /devices/platform/soc/18800000.qcom,icnss/firmware/wlan!qca_cld!wlan_mac.bin took 0ms
1867[ 15.610537] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1868[ 17.061313] [drm:oneplus_display_notify_dim:3152] notify dim 0
1869[ 17.240133] SMBLIB: op_recovery_revert_boost: suspend usb about 1s
1870[ 17.240152] SMBLIB: smblib_set_icl_current: icl_ua=0
1871[ 17.240154] SMBLIB: smblib_set_usb_suspend: suspend=1
1872[ 17.462006] healthd: battery l=68 v=3933 t=34.9 h=2 st=2 c=652 fc=0 chg=u
1873[ 18.323930] SMBLIB: smblib_set_icl_current: icl_ua=25000
1874[ 18.323935] SMBLIB: smblib_set_usb_suspend: suspend=1
1875[ 18.323947] SMBLIB: smblib_set_icl_current: icl_ua=500000
1876[ 18.324022] SMBLIB: smblib_set_usb_suspend: suspend=0
1877[ 19.233235] healthd: battery l=68 v=3892 t=34.9 h=2 st=2 c=869 fc=0 chg=u
1878[ 20.035688] init: Received control message 'stop' for 'vendor.imsrcsservice' from pid: 2666 (/system/vendor/bin/imsrcsd)
1879[ 20.035706] init: Sending signal 9 to service 'vendor.imsrcsservice' (pid 2666) process group...
1880[ 20.040915] libprocessgroup: Successfully killed process cgroup uid 1001 pid 2666 in 5ms
1881[ 20.042291] init: Service 'vendor.imsrcsservice' (pid 2666) received signal 9
1882[ 20.651953] healthd: battery l=68 v=3952 t=34.9 h=2 st=2 c=91 fc=0 chg=u
1883[ 23.020667] init: Service 'bootanim' (pid 1055) exited with status 0
1884[ 23.115148] init: processing action (sys.boot_completed=1) from (/init.rc:886)
1885[ 23.115222] init: processing action (sys.boot_completed=1) from (/init.rc:991)
1886[ 23.115278] init: starting service 'EjqHwIEl18XXb'...
1887[ 23.117405] init: processing action (sys.boot_completed=1) from (/init.usb.rc:115)
1888[ 23.117869] init: Command 'write /sys/module/smb_lib/parameters/sys_boot_complete 1' action=sys.boot_completed=1 (/init.usb.rc:116) took 0ms and failed: Unable to write to file '/sys/module/smb_lib/parameters/sys_boot_complete': open() failed: Permission denied
1889[ 23.118217] Boot completed
1890[ 23.121252] sdcardfs version 2.0
1891[ 23.121256] sdcardfs: dev_name -> /data/media
1892[ 23.121258] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,unshared_obb,mask=6,userid=0,gid=1015
1893[ 23.121260] sdcardfs: mnt -> 0000000000000000
1894[ 23.121292] sdcardfs: mounted on top of /data/media type f2fs
1895[ 23.121627] Remount options were mask=23,gid=9997 for vfsmnt 0000000000000000.
1896[ 23.121629] sdcardfs : options - debug:1
1897[ 23.121630] sdcardfs : options - gid:9997
1898[ 23.121632] sdcardfs : options - mask:23
1899[ 23.121731] Remount options were mask=7,gid=9997 for vfsmnt 0000000000000000.
1900[ 23.121733] sdcardfs : options - debug:1
1901[ 23.121733] sdcardfs : options - gid:9997
1902[ 23.121734] sdcardfs : options - mask:7
1903[ 23.121823] Remount options were mask=7,gid=9997 for vfsmnt 0000000000000000.
1904[ 23.121825] sdcardfs : options - debug:1
1905[ 23.121825] sdcardfs : options - gid:9997
1906[ 23.121826] sdcardfs : options - mask:7
1907[ 23.224078] msm-dsi-panel:[dsi_panel_set_native_display_p3_mode:4434] Native Display p3 Mode Off.
1908[ 23.228859] msm-dsi-panel:[dsi_panel_set_native_display_wide_color_mode:4462] Native wide color Mode Off.
1909[ 23.229341] msm-dsi-panel:[dsi_panel_set_native_display_srgb_color_mode:4490] Native srgb color Mode Off.
1910[ 23.229658] msm-dsi-panel:[dsi_panel_set_customer_srgb_mode:4518] turn off customer srgb
1911[ 23.234003] msm-dsi-panel:[dsi_panel_set_customer_p3_mode:4546] turn off customer P3
1912[ 23.259214] msm-dsi-panel:[dsi_panel_set_customer_p3_mode:4541] turn on customer P3
1913[ 23.402025] zram0: detected capacity change from 1073741824 to 0
1914[ 23.404080] zram0: detected capacity change from 0 to 2202009600
1915[ 23.425008] Adding 2150396k swap on /dev/block/zram0. Priority:32758 extents:1 across:2150396k SS
1916[ 23.814662] synaptics,s3320: start get base data:1
1917[ 23.970199] synaptics,s3320: set_doze_time: set doze time: 1
1918[ 23.970931] synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x67 !
1919[ 24.983668] [drm:oneplus_display_notify_dim:3152] notify dim 0
1920[ 24.997891] [drm:oneplus_display_notify_dim:3152] notify dim 0
1921[ 25.013802] [drm:oneplus_display_notify_dim:3152] notify dim 0
1922[ 25.014942] [drm:oneplus_display_notify_dim:3152] notify dim 0
1923[ 25.272065] selinux: SELinux: Skipping restorecon on directory(/data/system_ce/0)\x0a
1924[ 25.274959] init: Async property child exited with status 0
1925[ 25.281138] selinux: SELinux: Skipping restorecon on directory(/data/vendor_ce/0)\x0a
1926[ 25.282294] init: Async property child exited with status 0
1927[ 25.287884] selinux: SELinux: Skipping restorecon on directory(/data/misc_ce/0)\x0a
1928[ 25.288944] init: Async property child exited with status 0
1929[ 25.769436] init: processing action (vold.internalSD.startcopy=1) from (OP_ACTION_INDEX:31)
1930[ 25.769625] init: starting service 'filebuilderd'...
1931[ 25.778448] filebuilderd: run /system/bin/filebuilderd ENGINE START!
1932[ 25.778502] filebuilderd: Finish traveling /data/media/ folder, 0 files (0KB) copied, travel 0 folder, elapse 0 msec
1933[ 25.778504] filebuilderd: Start checking folder...
1934[ 25.778565] filebuilderd: Finish check /data/media/0/ folder, elapse 0 msec, ret = 0
1935[ 25.780486] init: Service 'filebuilderd' (pid 3503) exited with status 0
1936[ 26.274918] ese_dev_open: NFC controller found
1937[ 26.274956] pn8xt_ese_dev_open: called
1938[ 26.275009] ese_dev_open: major,minor: 10,122
1939[ 26.281717] nfc_dev_open: 10,121
1940[ 26.315002] pn8xt_ese_pwr: power on ese
1941[ 26.315018] trigger_onoff:Invalid nfc service_pid 0
1942[ 26.328133] spi_geni 880000.spi: tx_fifo 16 rx_fifo 16 tx_width 32
1943[ 26.332755] trigger_onoff:Invalid nfc service_pid 0
1944[ 26.335785] trigger_onoff:Invalid nfc service_pid 0
1945[ 26.335796] pn8xt_ese_dev_release: called
1946[ 26.335796] ese_dev_release: released
1947[ 26.363447] pn8xt_ese_dev_open: called
1948[ 26.363452] ese_dev_open: major,minor: 10,122
1949[ 26.364250] nfc_dev_open: 10,121
1950[ 26.394426] pn8xt_ese_pwr: power on ese
1951[ 26.394442] trigger_onoff:Invalid nfc service_pid 0
1952[ 26.513286] trigger_onoff:Invalid nfc service_pid 0
1953[ 26.516318] trigger_onoff:Invalid nfc service_pid 0
1954[ 26.516333] pn8xt_ese_dev_release: called
1955[ 26.516334] ese_dev_release: released