· 4 years ago · Jun 02, 2021, 12:46 AM
1debian@beaglebone:~/ardupilot/Tools/Linux_HAL_Essentials/pru/aiopru$ dmesg
2[ 0.000000] Booting Linux on physical CPU 0x0
3[ 0.000000] Linux version 4.19.94-ti-rt-r64 (voodoo@rpi4b4g-13) (gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT RT Sat May 22 00:17:24 UTC 2021
4[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
5[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
6[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Blue
7[ 0.000000] Memory policy: Data cache writeback
8[ 0.000000] efi: Getting EFI parameters from FDT:
9[ 0.000000] efi: UEFI not found.
10[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
11[ 0.000000] On node 0 totalpages: 130560
12[ 0.000000] Normal zone: 1148 pages used for memmap
13[ 0.000000] Normal zone: 0 pages reserved
14[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
15[ 0.000000] CPU: All CPU(s) started in SVC mode.
16[ 0.000000] AM335X ES2.1 (sgx neon)
17[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4d0 with crng_init=0
18[ 0.000000] percpu: Embedded 17 pages/cpu s40864 r8192 d20576 u69632
19[ 0.000000] pcpu-alloc: s40864 r8192 d20576 u69632 alloc=17*4096
20[ 0.000000] pcpu-alloc: [0] 0
21[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
22[ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet
23[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
24[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
25[ 0.000000] Memory: 437828K/522240K available (13312K kernel code, 1095K rwdata, 4356K rodata, 1024K init, 390K bss, 35260K reserved, 49152K cma-reserved, 0K highmem)
26[ 0.000000] Virtual kernel memory layout:
27 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
28 fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
29 vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
30 lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
31 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
32 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
33 .text : 0x(ptrval) - 0x(ptrval) (14304 kB)
34 .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
35 .data : 0x(ptrval) - 0x(ptrval) (1096 kB)
36 .bss : 0x(ptrval) - 0x(ptrval) ( 391 kB)
37[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
38[ 0.000000] ftrace: allocating 42175 entries in 124 pages
39[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
40[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
41[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
42[ 0.000000] No expedited grace period (rcu_normal_after_boot).
43[ 0.000000] Tasks RCU enabled.
44[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
45[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
46[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
47[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
48[ 0.000025] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
49[ 0.000041] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
50[ 0.000050] OMAP clocksource: timer1 at 24000000 Hz
51[ 0.001583] timer_probe: no matching timers found
52[ 0.001928] Console: colour dummy device 80x30
53[ 0.001975] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
54[ 0.001979] This ensures that you still see kernel messages. Please
55[ 0.001982] update your kernel commandline.
56[ 0.002019] Calibrating delay loop (skipped) preset value.. 995.32 BogoMIPS (lpj=1990656)
57[ 0.002034] pid_max: default: 32768 minimum: 301
58[ 0.002372] Security Framework initialized
59[ 0.002384] Yama: becoming mindful.
60[ 0.002549] AppArmor: AppArmor initialized
61[ 0.002685] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
62[ 0.002697] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
63[ 0.004054] CPU: Testing write buffer coherency: ok
64[ 0.004125] CPU0: Spectre v2: using BPIALL workaround
65[ 0.004693] CPU0: thread -1, cpu 0, socket -1, mpidr 0
66[ 0.025601] Setting up static identity map for 0x80100000 - 0x80100060
67[ 0.041490] rcu: Hierarchical SRCU implementation.
68[ 0.068748] EFI services will not be available.
69[ 0.073519] smp: Bringing up secondary CPUs ...
70[ 0.073537] smp: Brought up 1 node, 1 CPU
71[ 0.073549] SMP: Total of 1 processors activated (995.32 BogoMIPS).
72[ 0.073556] CPU: All CPU(s) started in SVC mode.
73[ 0.075447] devtmpfs: initialized
74[ 0.109931] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
75[ 0.110744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
76[ 0.110776] futex hash table entries: 256 (order: 2, 16384 bytes)
77[ 0.114924] xor: automatically using best checksumming function arm4regs
78[ 0.114943] pinctrl core: initialized pinctrl subsystem
79[ 0.116633] NET: Registered protocol family 16
80[ 0.123223] DMA: preallocated 1024 KiB pool for atomic coherent allocations
81[ 0.205226] l4_wkup_cm:clk:0010:0: failed to disable
82[ 0.246327] audit: initializing netlink subsys (disabled)
83[ 0.249665] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
84[ 0.258433] OMAP GPIO hardware version 0.1
85[ 0.263091] GPIO line 106 (LS_BUF_EN) hogged as output/high
86[ 0.283260] hw-breakpoint: debug architecture 0x4 unsupported.
87[ 0.313709] raid6: using algorithm int32x8 gen() 0 MB/s
88[ 0.313725] raid6: .... xor() 0 MB/s, rmw enabled
89[ 0.313732] raid6: using intx1 recovery algorithm
90[ 0.324864] edma 49000000.edma: TI EDMA DMA engine driver
91[ 0.331859] SCSI subsystem initialized
92[ 0.333740] libata version 3.00 loaded.
93[ 0.334122] usbcore: registered new interface driver usbfs
94[ 0.334216] usbcore: registered new interface driver hub
95[ 0.334367] usbcore: registered new device driver usb
96[ 0.335748] pps_core: LinuxPPS API ver. 1 registered
97[ 0.335761] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
98[ 0.335788] PTP clock support registered
99[ 0.336881] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
100[ 0.341982] Advanced Linux Sound Architecture Driver Initialized.
101[ 0.343087] NetLabel: Initializing
102[ 0.343100] NetLabel: domain hash size = 128
103[ 0.343106] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
104[ 0.343214] NetLabel: unlabeled traffic allowed by default
105[ 0.344392] clocksource: Switched to clocksource timer1
106[ 0.559206] VFS: Disk quotas dquot_6.6.0
107[ 0.559332] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
108[ 0.560890] AppArmor: AppArmor Filesystem Enabled
109[ 0.577556] NET: Registered protocol family 2
110[ 0.579035] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes)
111[ 0.579082] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
112[ 0.579144] TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
113[ 0.579335] TCP: Hash tables configured (established 4096 bind 4096)
114[ 0.579494] UDP hash table entries: 256 (order: 2, 16384 bytes)
115[ 0.579540] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
116[ 0.579879] NET: Registered protocol family 1
117[ 0.593423] RPC: Registered named UNIX socket transport module.
118[ 0.593437] RPC: Registered udp transport module.
119[ 0.593443] RPC: Registered tcp transport module.
120[ 0.593449] RPC: Registered tcp NFSv4.1 backchannel transport module.
121[ 0.594312] Unpacking initramfs...
122[ 1.018804] Freeing initrd memory: 6908K
123[ 1.019746] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
124[ 1.023596] Initialise system trusted keyrings
125[ 1.024071] workingset: timestamp_bits=14 max_order=17 bucket_order=3
126[ 1.035478] zbud: loaded
127[ 1.044099] NFS: Registering the id_resolver key type
128[ 1.044152] Key type id_resolver registered
129[ 1.044161] Key type id_legacy registered
130[ 1.044184] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
131[ 1.044756] fuse init (API version 7.27)
132[ 1.058205] Key type asymmetric registered
133[ 1.058223] Asymmetric key parser 'x509' registered
134[ 1.058336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
135[ 1.062736] io scheduler noop registered
136[ 1.062748] io scheduler deadline registered
137[ 1.063296] io scheduler cfq registered (default)
138[ 1.063310] io scheduler mq-deadline registered
139[ 1.066908] pinctrl-single 44e10800.pinmux: 142 pins, size 568
140[ 1.083462] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
141[ 1.088309] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 38, base_baud = 3000000) is a 8250
142[ 1.098533] console [ttyS0] enabled
143[ 1.099951] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 39, base_baud = 3000000) is a 8250
144[ 1.101426] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 40, base_baud = 3000000) is a 8250
145[ 1.102826] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250
146[ 1.104034] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250
147[ 1.105666] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250
148[ 1.109820] omap_rng 48310000.rng: Random Number Generator ver. 20
149[ 1.110798] sdhci: Secure Digital Host Controller Interface driver
150[ 1.110809] sdhci: Copyright(c) Pierre Ossman
151[ 1.111403] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
152[ 1.111416] omap_hsmmc 48060000.mmc: Got CD GPIO
153[ 1.112200] random: fast init done
154[ 1.112810] random: crng init done
155[ 1.113792] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
156[ 1.142115] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1
157[ 1.167742] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.2
158[ 1.201677] mmc0: host does not support reading read-only switch, assuming write-enable
159[ 1.204753] mmc0: new high speed SDHC card at address aaaa
160[ 1.210374] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
161[ 1.215398] mmc1: new high speed MMC card at address 0001
162[ 1.220602] mmcblk0: p1
163[ 1.221928] mmcblk1: mmc1:0001 S10004 3.56 GiB
164[ 1.222693] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
165[ 1.223454] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
166[ 1.225520] mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB, chardev (245:0)
167[ 1.268977] sdhci-pltfm: SDHCI platform and OF driver helper
168[ 1.278719] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range
169[ 1.279184] eqep 48300180.eqep: ver. 1.0
170[ 1.280018] eqep 48300180.eqep: count_mode:0
171[ 1.280034] eqep 48300180.eqep: invert_qa:1
172[ 1.280044] eqep 48300180.eqep: invert_qb:1
173[ 1.280053] eqep 48300180.eqep: invert_qi:0
174[ 1.280063] eqep 48300180.eqep: invert_qs:0
175[ 1.280073] eqep 48300180.eqep: swap_inputs:0
176[ 1.280083] eqep 48300180.eqep: QDECCTL:0x0180
177[ 1.280093] eqep 48300180.eqep: QPOSINIT:0x00000000
178[ 1.280101] eqep 48300180.eqep: QPOSMAX:0xffffffff
179[ 1.280110] eqep 48300180.eqep: QPOSCNT:0x00000000
180[ 1.280119] eqep 48300180.eqep: omit_interrupt:0
181[ 1.280127] eqep 48300180.eqep: QEINT:0x0800
182[ 1.280136] eqep 48300180.eqep: QUPRD:0x05f5e100
183[ 1.280144] eqep 48300180.eqep: QEPCTL:0x009e write
184[ 1.280153] eqep 48300180.eqep: QEPCTL:0x009e read
185[ 1.280268] eqep 48300180.eqep: irq:68, clk_rate:100000000
186[ 1.280913] eqep 48302180.eqep: ver. 1.0
187[ 1.281630] eqep 48302180.eqep: count_mode:0
188[ 1.281644] eqep 48302180.eqep: invert_qa:1
189[ 1.281653] eqep 48302180.eqep: invert_qb:1
190[ 1.281662] eqep 48302180.eqep: invert_qi:0
191[ 1.281671] eqep 48302180.eqep: invert_qs:0
192[ 1.281681] eqep 48302180.eqep: swap_inputs:0
193[ 1.281690] eqep 48302180.eqep: QDECCTL:0x0180
194[ 1.281699] eqep 48302180.eqep: QPOSINIT:0x00000000
195[ 1.281707] eqep 48302180.eqep: QPOSMAX:0xffffffff
196[ 1.281715] eqep 48302180.eqep: QPOSCNT:0x00000000
197[ 1.281724] eqep 48302180.eqep: omit_interrupt:0
198[ 1.281805] eqep 48302180.eqep: QEINT:0x0800
199[ 1.281815] eqep 48302180.eqep: QUPRD:0x05f5e100
200[ 1.281823] eqep 48302180.eqep: QEPCTL:0x009e write
201[ 1.281831] eqep 48302180.eqep: QEPCTL:0x009e read
202[ 1.281862] eqep 48302180.eqep: irq:70, clk_rate:100000000
203[ 1.282311] eqep 48304180.eqep: ver. 1.0
204[ 1.282975] eqep 48304180.eqep: count_mode:0
205[ 1.282987] eqep 48304180.eqep: invert_qa:1
206[ 1.282996] eqep 48304180.eqep: invert_qb:1
207[ 1.283005] eqep 48304180.eqep: invert_qi:0
208[ 1.283014] eqep 48304180.eqep: invert_qs:0
209[ 1.283023] eqep 48304180.eqep: swap_inputs:0
210[ 1.283033] eqep 48304180.eqep: QDECCTL:0x0180
211[ 1.283041] eqep 48304180.eqep: QPOSINIT:0x00000000
212[ 1.283049] eqep 48304180.eqep: QPOSMAX:0xffffffff
213[ 1.283057] eqep 48304180.eqep: QPOSCNT:0x00000000
214[ 1.283066] eqep 48304180.eqep: omit_interrupt:0
215[ 1.283075] eqep 48304180.eqep: QEINT:0x0800
216[ 1.283082] eqep 48304180.eqep: QUPRD:0x05f5e100
217[ 1.283090] eqep 48304180.eqep: QEPCTL:0x009e write
218[ 1.283098] eqep 48304180.eqep: QEPCTL:0x009e read
219[ 1.283127] eqep 48304180.eqep: irq:72, clk_rate:100000000
220[ 1.295083] mmc2: new high speed SDIO card at address 0001
221[ 1.308902] libphy: Fixed MDIO Bus: probed
222[ 1.310183] CAN device driver interface
223[ 1.312025] c_can_platform 481d0000.can: c_can_platform device registered (regs=4cefdc28, irq=51)
224[ 1.314157] usbcore: registered new interface driver smsc95xx
225[ 1.315750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
226[ 1.315823] ehci-platform: EHCI generic platform driver
227[ 1.316172] ehci-omap: OMAP-EHCI Host Controller driver
228[ 1.317307] usbcore: registered new interface driver usb-storage
229[ 1.321100] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
230[ 1.321302] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0
231[ 1.325075] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
232[ 1.325329] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0
233[ 1.329645] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
234[ 1.329698] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
235[ 1.330102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
236[ 1.330116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
237[ 1.330125] usb usb1: Product: MUSB HDRC host driver
238[ 1.330133] usb usb1: Manufacturer: Linux 4.19.94-ti-rt-r64 musb-hcd
239[ 1.330141] usb usb1: SerialNumber: musb-hdrc.1
240[ 1.331239] hub 1-0:1.0: USB hub found
241[ 1.331318] hub 1-0:1.0: 1 port detected
242[ 1.348655] omap_rtc 44e3e000.rtc: registered as rtc0
243[ 1.350391] i2c /dev entries driver
244[ 1.354383] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
245[ 1.355058] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
246[ 1.361849] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
247[ 1.362245] omap-aes 53500000.aes: will run requests pump with realtime priority
248[ 1.365928] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
249[ 1.370535] hidraw: raw HID events driver (C) Jiri Kosina
250[ 1.378611] gnss: GNSS driver registered with major 242
251[ 1.386807] NET: Registered protocol family 10
252[ 1.468024] Segment Routing with IPv6
253[ 1.468174] mip6: Mobile IPv6
254[ 1.468347] NET: Registered protocol family 17
255[ 1.468701] can: controller area network core (rev 20170425 abi 9)
256[ 1.468880] NET: Registered protocol family 29
257[ 1.469001] 8021q: 802.1Q VLAN Support v1.8
258[ 1.469110] Key type dns_resolver registered
259[ 1.469117] mpls_gso: MPLS GSO support
260[ 1.469429] ThumbEE CPU extension supported.
261[ 1.469451] Registering SWP/SWPB emulation handler
262[ 1.469463] omap_voltage_late_init: Voltage driver support not added
263[ 1.478202] registered taskstats version 1
264[ 1.478214] Loading compiled-in X.509 certificates
265[ 1.478384] zswap: loaded using pool lzo/zbud
266[ 1.482579] Btrfs loaded, crc32c=crc32c-generic
267[ 1.482724] AppArmor: AppArmor sha1 policy hashing enabled
268[ 1.547035] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
269[ 1.547982] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
270[ 1.549261] tps65217 0-0024: TPS65217 ID 0xe version 1.2
271[ 1.550286] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
272[ 1.550422] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
273[ 1.552813] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
274[ 1.554847] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz
275[ 1.560566] cpu cpu0: Linked as a consumer to regulator.4
276[ 1.560726] cpu cpu0: Dropping the link to regulator.4
277[ 1.561322] cpu cpu0: Linked as a consumer to regulator.4
278[ 1.563897] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
279[ 1.565556] ALSA device list:
280[ 1.565568] No soundcards found.
281[ 1.573415] Freeing unused kernel memory: 1024K
282[ 1.574157] Run /init as init process
283[ 9.179575] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
284[ 10.059170] systemd[1]: System time before build time, advancing clock.
285[ 10.120187] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
286[ 10.121486] systemd[1]: Detected architecture arm.
287[ 10.149567] systemd[1]: Set hostname to <beaglebone>.
288[ 11.743055] systemd[1]: /lib/systemd/system/rc_battery_monitor.service:5: PIDFile= references path below legacy directory /var/run/, updating /var/run/rc_battery_monitor.pid → /run/rc_battery_monitor.pid; please update the unit file accordingly.
289[ 11.892800] systemd[1]: Listening on udev Control Socket.
290[ 11.899366] systemd[1]: Created slice User and Session Slice.
291[ 11.899558] systemd[1]: Reached target Slices.
292[ 11.899674] systemd[1]: Reached target Remote File Systems.
293[ 11.905540] systemd[1]: Created slice system-getty.slice.
294[ 11.907261] systemd[1]: Listening on Journal Socket.
295[ 12.923115] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
296[ 14.369688] systemd-journald[700]: Received request to flush runtime journal from PID 1
297[ 22.317623] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f62000
298[ 22.317641] pgd = 128024c5
299[ 22.317646] [b6f62000] *pgd=9c61e831, *pte=4a324143, *ppte=4a324832
300[ 26.505466] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6efe000
301[ 26.505483] pgd = 439bc215
302[ 26.505489] [b6efe000] *pgd=9c646831, *pte=4a324143, *ppte=4a324832
303[ 27.949002] using random self ethernet address
304[ 28.011076] using random host ethernet address
305[ 28.406585] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fc6000
306[ 28.406603] pgd = 4ad37859
307[ 28.406608] [b6fc6000] *pgd=9b4f7831, *pte=4a324143, *ppte=4a324832
308[ 28.770459] Mass Storage Function, version: 2009/09/11
309[ 28.770481] LUN: removable file: (no medium)
310[ 29.212324] using random self ethernet address
311[ 29.212345] using random host ethernet address
312[ 29.484996] usb0: HOST MAC f4:5e:ab:50:c4:c5
313[ 29.489597] usb0: MAC f4:5e:ab:50:c4:c4
314[ 29.501099] usb1: HOST MAC f4:5e:ab:50:c4:c7
315[ 29.503921] usb1: MAC f4:5e:ab:50:c4:c8
316[ 29.797303] configfs-gadget gadget: high-speed config #1: c
317[ 29.816013] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
318[ 30.496742] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
319[ 30.531716] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
320[ 30.991208] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f83000
321[ 30.991226] pgd = 81abf960
322[ 30.991231] [b6f83000] *pgd=99b1a831, *pte=4a324143, *ppte=4a324832
323[ 31.712671] wlan-en-regulator: disabling
324[ 33.035250] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f00000
325[ 33.035268] pgd = 35e315bf
326[ 33.035273] [b6f00000] *pgd=99bad831, *pte=4a324143, *ppte=4a324832
327[ 35.171135] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f33000
328[ 35.171153] pgd = 38dd9881
329[ 35.171158] [b6f33000] *pgd=99b38831, *pte=4a324143, *ppte=4a324832
330[ 37.365652] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fe9000
331[ 37.365670] pgd = c32c0070
332[ 37.365675] [b6fe9000] *pgd=99a90831, *pte=4a324143, *ppte=4a324832
333[ 39.192293] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f5b000
334[ 39.192312] pgd = b5a7489d
335[ 39.192317] [b6f5b000] *pgd=9b0a6831, *pte=4a324143, *ppte=4a324832
336[ 41.245083] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fa1000
337[ 41.245101] pgd = c50de2d0
338[ 41.245106] [b6fa1000] *pgd=9b08a831, *pte=4a324143, *ppte=4a324832
339[ 43.125217] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6ef7000
340[ 43.125235] pgd = aeedd4e9
341[ 43.125240] [b6ef7000] *pgd=9b0b6831, *pte=4a324143, *ppte=4a324832
342[ 45.109318] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f1b000
343[ 45.109336] pgd = 3260c723
344[ 45.109340] [b6f1b000] *pgd=99b4d831, *pte=4a324143, *ppte=4a324832
345[ 47.155949] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f44000
346[ 47.155967] pgd = 1610ab9e
347[ 47.155971] [b6f44000] *pgd=9b0a1831, *pte=4a324143, *ppte=4a324832
348[ 49.513719] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fce000
349[ 49.513738] pgd = 81edb38c
350[ 49.513743] [b6fce000] *pgd=9b50a831, *pte=4a324143, *ppte=4a324832
351[ 51.240061] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f3d000
352[ 51.240078] pgd = 81edb38c
353[ 51.240083] [b6f3d000] *pgd=9b08b831, *pte=4a324143, *ppte=4a324832
354[ 53.133138] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f72000
355[ 53.133155] pgd = c9641cee
356[ 53.133160] [b6f72000] *pgd=9b0ac831, *pte=4a324143, *ppte=4a324832
357[ 55.312597] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fa0000
358[ 55.312614] pgd = 0a980bcd
359[ 55.312619] [b6fa0000] *pgd=9b06e831, *pte=4a324143, *ppte=4a324832
360[ 58.163206] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6efa000
361[ 58.163224] pgd = c85aa6b7
362[ 58.163229] [b6efa000] *pgd=9c72b831, *pte=4a324143, *ppte=4a324832
363[ 60.747909] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fc8000
364[ 60.747927] pgd = b42d3174
365[ 60.747932] [b6fc8000] *pgd=99b2a831, *pte=4a324143, *ppte=4a324832
366[ 62.954227] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fb3000
367[ 62.954246] pgd = fe412bd7
368[ 62.954251] [b6fb3000] *pgd=9b1aa831, *pte=4a324143, *ppte=4a324832
369[ 65.273787] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f47000
370[ 65.273805] pgd = 6a37a536
371[ 65.273810] [b6f47000] *pgd=9b179831, *pte=4a324143, *ppte=4a324832
372[ 67.056906] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f6b000
373[ 67.056923] pgd = c50de2d0
374[ 67.056928] [b6f6b000] *pgd=9c7e9831, *pte=4a324143, *ppte=4a324832
375[ 68.652314] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f1b000
376[ 68.652332] pgd = b42d3174
377[ 68.652337] [b6f1b000] *pgd=9b073831, *pte=4a324143, *ppte=4a324832
378[ 69.858273] pvrsrvkm: loading out-of-tree module taints kernel.
379[ 74.977675] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.sgx on minor 0
380[ 92.704951] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
381[ 93.439697] PM: Cannot get wkup_m3_ipc handle
382[ 94.390120] remoteproc remoteproc0: wkup_m3 is available
383[ 94.458906] PM: Cannot get wkup_m3_ipc handle
384[ 94.464726] remoteproc remoteproc0: powering up wkup_m3
385[ 94.464758] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
386[ 94.484761] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
387[ 94.486243] remoteproc remoteproc0: remote processor wkup_m3 is now up
388[ 110.296236] Bluetooth: Core ver 2.22
389[ 110.307385] NET: Registered protocol family 31
390[ 110.307406] Bluetooth: HCI device and connection manager initialized
391[ 110.307448] Bluetooth: HCI socket layer initialized
392[ 110.307468] Bluetooth: L2CAP socket layer initialized
393[ 110.307568] Bluetooth: SCO socket layer initialized
394[ 110.509566] Bluetooth: HCI UART driver ver 2.3
395[ 110.512079] Bluetooth: HCI UART protocol H4 registered
396[ 110.526890] Bluetooth: HCI UART protocol LL registered
397[ 110.526910] Bluetooth: HCI UART protocol ATH3K registered
398[ 110.527496] Bluetooth: HCI UART protocol Three-wire (H5) registered
399[ 132.879437] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
400[ 132.879707] Bluetooth: BNEP filters: protocol multicast
401[ 132.879751] Bluetooth: BNEP socket layer initialized
402[ 136.678374] Bluetooth: RFCOMM TTY layer initialized
403[ 136.678432] Bluetooth: RFCOMM socket layer initialized
404[ 136.678500] Bluetooth: RFCOMM ver 1.11
405[ 137.316218] cfg80211: Loading compiled-in X.509 certificates for regulatory database
406[ 137.646945] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
407[ 150.394879] PM: bootloader does not support rtc-only!
408[ 150.966126] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
409[ 151.204792] wlcore: loaded
410[ 152.506677] wlcore: PHY firmware version: Rev 8.2.0.0.245
411[ 152.866764] wlcore: firmware booted (Rev 8.9.0.0.88)
412[ 153.070885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
413[ 157.688670] wlan0: authenticate with 0c:80:63:fd:40:4c
414[ 157.787410] wlan0: send auth to 0c:80:63:fd:40:4c (try 1/3)
415[ 157.810152] wlan0: authenticated
416[ 157.897336] wlan0: associate with 0c:80:63:fd:40:4c (try 1/3)
417[ 157.912649] wlan0: RX AssocResp from 0c:80:63:fd:40:4c (capab=0x411 status=0 aid=2)
418[ 158.029542] wlan0: associated
419[ 158.446211] IPv6: ADDRCONF(NETDEV_UP): SoftAp0: link is not ready
420[ 160.280787] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
421[ 160.435235] wlcore: Association completed.
422[ 175.951357] wlcore: down
423[ 177.062030] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready