· 5 years ago · Sep 27, 2020, 08:50 PM
1BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
2Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
3Copyright (C) Broadcom Corporation.
4
5Hit any key to stop autoboot:
6MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
7Enabling NAND flash at CS2.
8BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
9Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
10INFO: Configuring LEDs for PCB rev. 5
11CPU speed: 742MHz
12Total memory(0): 512MB
13DDR Freq: 800 MHz
14DDR Mode: DDR3
15DEV TECH: 2GBIT
16DDR Width: 16
17Boot Device: SPI
18Total flash: 8MB
19
20Initializing USB.
21USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
22Saving shmoo values...
23Saved shmoo values....
24
25CFE initialized.
26Trying to start splash screen...
27No valid image found in flash0.splash - disabling splash
28
29Executing STARTUP...
30Invalid command: "cls"
31Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
32
33Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
34Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
35Starting program at 0x80451ff0
36
37[ 0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
38[ 0.000000] Fetching vars from bootloader...
39[ 0.000000] Serial number is "31D00885F64133101594"
40[ 0.000000] Replacing flash type from NAND to SPI
41[ 0.000000] found 16 vars.
42[ 0.000000] Options: moca=0 sata=1 pcie=0 usb=1
43[ 0.000000] Using 512 MB + 0 MB RAM (from CFE)
44[ 0.000000] bootconsole [early0] enabled
45[ 0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
46[ 0.000000] FPU revision is: 00130001
47[ 0.000000] Determined physical RAM map:
48[ 0.000000] memory: 10000000 @ 00000000 (usable)
49[ 0.000000] memory: 10000000 @ 20000000 (usable)
50[ 0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
51[ 0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
52[ 0.000000] Initrd not found or empty - disabling initrd
53[ 0.000000] Zone PFN ranges:
54[ 0.000000] Normal 0x00000000 -> 0x00030000
55[ 0.000000] Movable zone start PFN for each node
56[ 0.000000] Early memory PFN ranges
57[ 0.000000] 0: 0x00000000 -> 0x00010000
58[ 0.000000] 0: 0x00020000 -> 0x00030000
59[ 0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
60[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
61[ 0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
62[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
63[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
64[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
65[ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
66[ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
67[ 0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
68[ 0.000000] Hierarchical RCU implementation.
69[ 0.000000] NR_IRQS:160
70[ 0.000000] Measuring MIPS counter frequency...
71[ 0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
72[ 0.000000] Console: colour dummy device 80x25
73[ 0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
74[ 0.012000] pid_max: default: 32768 minimum: 301
75[ 0.013000] Mount-cache hash table entries: 512
76[ 0.015000] SMP: Booting CPU1...
77[ 0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
78[ 0.020000] FPU revision is: 00130001
79[ 0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
80[ 0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
81[ 0.029000] SMP: CPU1 is running
82[ 0.029000] Brought up 2 CPUs
83[ 0.033000] NET: Registered protocol family 16
84[ 0.035000] USB0: power enable is active high; overcurrent is active low
85[ 0.036000] USB1: power enable is active high; overcurrent is active low
86[ 0.053000] bio: create slab <bio-0> at 0
87[ 0.055000] SCSI subsystem initialized
88[ 0.056000] usbcore: registered new interface driver usbfs
89[ 0.057000] usbcore: registered new interface driver hub
90[ 0.058000] usbcore: registered new device driver usb
91[ 0.060000] cfg80211: Calling CRDA to update world regulatory domain
92[ 0.061000] Switching to clocksource wktmr
93[ 0.077000] NET: Registered protocol family 2
94[ 0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
95[ 0.088000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
96[ 0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
97[ 0.103000] TCP: Hash tables configured (established 16384 bind 16384)
98[ 0.109000] TCP reno registered
99[ 0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
100[ 0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
101[ 0.125000] NET: Registered protocol family 1
102[ 0.129000] RPC: Registered named UNIX socket transport module.
103[ 0.135000] RPC: Registered udp transport module.
104[ 0.140000] RPC: Registered tcp transport module.
105[ 0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
106[ 0.169000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
107[ 0.175000] NTFS driver 2.1.30 [Flags: R/O].
108[ 0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
109[ 0.186000] fuse init (API version 7.18)
110[ 0.189000] fuse init DCACHE_BUG workaround enabled
111[ 0.195000] msgmni has been set to 227
112[ 0.207000] io scheduler noop registered
113[ 0.211000] io scheduler cfq registered (default)
114[ 0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
115[ 0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
116[ 0.230000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
117[ 0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
118[ 0.244000] console [ttyS2] enabled, bootconsole disabled
119[ 0.265000] brd: module loaded
120[ 0.274000] loop: module loaded
121[ 0.278000] ahci: SSS flag set, parallel bus scan disabled
122[ 0.294000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
123[ 0.302000] ahci strict-ahci.0: flags: sntf stag clo slum part
124[ 0.313000] scsi0 : ahci_platform
125[ 0.317000] scsi1 : ahci_platform
126[ 0.321000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
127[ 0.329000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
128[ 0.339000] brcmstb_nand: NAND controller driver is loaded
129[ 0.347000] All hardware filters disabled
130[ 0.451000] bcmgenet: configuring instance #0 for internal PHY
131[ 0.477000] bcmgenet bcmgenet.0: eth0: link down
132[ 0.484000] All hardware filters disabled
133[ 0.642000] ata1: SATA link down (SStatus 0 SControl 300)
134[ 0.808000] No PHY detected, not registering interface:1
135[ 0.813000] bcmgenet: probe of bcmgenet.1 failed with error -5
136[ 0.819000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
137[ 0.827000] usbcore: registered new interface driver pegasus
138[ 0.833000] usbcore: registered new interface driver asix
139[ 0.838000] usbcore: registered new interface driver cdc_ether
140[ 0.844000] usbcore: registered new interface driver net1080
141[ 0.850000] usbcore: registered new interface driver cdc_subset
142[ 0.856000] usbcore: registered new interface driver zaurus
143[ 0.862000] usbcore: registered new interface driver cdc_ncm
144[ 0.868000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
145[ 0.875000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
146[ 0.880000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
147[ 0.919000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
148[ 0.930000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
149[ 0.936000] hub 1-0:1.0: USB hub found
150[ 0.940000] hub 1-0:1.0: 1 port detected
151[ 0.944000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
152[ 0.950000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
153[ 0.952000] ata2: SATA link down (SStatus 0 SControl 300)
154[ 0.994000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
155[ 1.005000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
156[ 1.011000] hub 2-0:1.0: USB hub found
157[ 1.015000] hub 2-0:1.0: 1 port detected
158[ 1.019000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
159[ 1.026000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
160[ 1.031000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
161[ 1.039000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
162[ 1.109000] hub 3-0:1.0: USB hub found
163[ 1.113000] hub 3-0:1.0: 1 port detected
164[ 1.118000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
165[ 1.123000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
166[ 1.130000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
167[ 1.201000] hub 4-0:1.0: USB hub found
168[ 1.205000] hub 4-0:1.0: 1 port detected
169[ 1.210000] Initializing USB Mass Storage driver...
170[ 1.215000] usbcore: registered new interface driver usb-storage
171[ 1.221000] USB Mass Storage support registered.
172[ 1.226000] mousedev: PS/2 mouse device common for all mice
173[ 1.232000] lirc_dev: IR Remote Control driver registered, major 253
174[ 1.238000] IR LIRC bridge handler initialized
175[ 1.243000] sdhci: Secure Digital Host Controller Interface driver
176[ 1.249000] sdhci: Copyright(c) Pierre Ossman
177[ 1.254000] sdhci-pltfm: SDHCI platform and OF driver helper
178[ 1.259000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
179[ 1.268000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
180[ 1.276000] usbcore: registered new interface driver usbhid
181[ 1.282000] usbhid: USB HID core driver
182[ 1.286000] TCP cubic registered
183[ 1.289000] NET: Registered protocol family 17
184[ 1.294000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
185[ 1.303000] EBI CS0: setting up SPI flash (primary)
186[ 1.308000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
187[ 1.315000] m25p80 spi0.0: found mx25l6405d, expected m25p80
188[ 1.321000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
189[ 1.346000] Creating 8 MTD partitions on "spi0.0":
190[ 1.351000] 0x000000000000-0x000000100000 : "bootldr"
191[ 1.359000] 0x000000100000-0x000000110000 : "macadr"
192[ 1.365000] 0x000000110000-0x000000120000 : "nvram"
193[ 1.372000] 0x000000120000-0x000000180000 : "branding"
194[ 1.381000] 0x000000180000-0x000000200000 : "splash"
195[ 1.387000] 0x000000200000-0x000000600000 : "ro_kernel"
196[ 1.393000] 0x000000600000-0x000000610000 : "env"
197[ 1.399000] 0x000000610000-0x000000800000 : "bsec"
198[ 1.405000] EBI CS2: setting up NAND flash
199[ 1.408000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
200[ 1.419000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
201[ 1.419000]
202[ 1.429000] Bad block table found at page 131008, version 0x01
203[ 1.436000] Bad block table found at page 130944, version 0x01
204[ 1.469000] Creating 3 MTD partitions on "brcmnand.0":
205[ 1.475000] 0x000000000000-0x000000800000 : "kernel"
206[ 1.481000] 0x000000800000-0x000001000000 : "backup_kernel"
207[ 1.488000] 0x000001000000-0x000010000000 : "raw"
208
209[ 1.499000] Freeing unused kernel memory: 1996k freed
210[ 1.683000] brcmfb: addr = 0xac800000 offset = 0x0
211[ 1.689000] fb0: Broadcom frame buffer device
212Try to attach UBI ...
213[ 1.734000] UBI: attaching mtd10 to ubi0
214[ 1.738000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
215[ 1.744000] UBI: logical eraseblock size: 126976 bytes
216[ 1.749000] UBI: smallest flash I/O unit: 2048
217[ 1.754000] UBI: VID header offset: 2048 (aligned 2048)
218[ 1.760000] UBI: data offset: 4096
219
220(none) login: [ 3.264000] UBI: max. sequence number: 37729
221[ 3.289000] UBI: attached mtd10 to ubi0
222[ 3.293000] UBI: MTD device name: "raw"
223[ 3.298000] UBI: MTD device size: 240 MiB
224[ 3.303000] UBI: number of good PEBs: 1916
225[ 3.308000] UBI: number of bad PEBs: 4
226[ 3.312000] UBI: number of corrupted PEBs: 0
227[ 3.317000] UBI: max. allowed volumes: 128
228[ 3.322000] UBI: wear-leveling threshold: 4096
229[ 3.326000] UBI: number of internal volumes: 1
230[ 3.331000] UBI: number of user volumes: 2
231[ 3.336000] UBI: available PEBs: 42
232[ 3.340000] UBI: total number of reserved PEBs: 1874
233[ 3.345000] UBI: number of PEBs reserved for bad PEB handling: 19
234[ 3.351000] UBI: max/mean erase counter: 25/19
235[ 3.356000] UBI: image sequence number: 1320996868
236[ 3.361000] UBI: background thread "ubi_bgt0d" started, PID 513
237UBI was attached.
238[ 3.461000] UBIFS: recovery needed
239[ 3.596000] UBIFS: recovery completed
240[ 3.600000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
241[ 3.607000] UBIFS: file system size: 133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
242[ 3.615000] UBIFS: journal size: 6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
243[ 3.622000] UBIFS: media format: w4/r0 (latest is w4/r0)
244[ 3.628000] UBIFS: default compressor: lzo
245[ 3.632000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
246Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
247rootfs /dev/mtdblock11 mount successful
248Fastboot enabled
249Framebuffer custom resolution 0x0 incorrect
250Current framebuffer size is 720x576
251Sun Jan 1 01:01:00 UTC 2017
252deviceinfo:
253mac addr : E4:27:71:41:32:00
254serial num: 31D00885F64133101594
255board name: SML-482
256hw rev : 0
257features : cvbs hdmi spdif
258board : sml723x
259family : bcm97230
260S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
261Setup networking...
262[ 3.916000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
263[ 3.996000] bcmgenet bcmgenet.0: eth0: link down
264Initial network configuration:
2651: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
266 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
267 inet 127.0.0.1/8 scope host lo
2682: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
269 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
270Skip DHCP setup for fastboot
271Wait for USB devices...
272[ 5.606000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
273No USB storages found.
274Remove address on eth0
275Start STB application.
276The system is going down NOW!
277Sent SIGTERM to all processes
278Sent SIGKILL to all processes
279vm.min_free_kbytes = 8192
280vm.overcommit_memory = 1
281net.ipv4.conf.all.force_igmp_version = 2
282Starting syslogd ...
283
284SML-482 login: [ 11.275000] nexus: module license 'Proprietary' taints kernel.
285[ 11.281000] Disabling lock debugging due to kernel taint
286[ 11.396000] nexus driver initialized
287[ 12.143000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
288[ 13.456000] RTL871X: module init start
289[ 13.460000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
290[ 13.465000] RTL871X: build time: Jul 23 2020 16:07:06
291[ 13.471000] usbcore: registered new interface driver rtl8188eu
292[ 13.477000] RTL871X: module init ret=0
293[ 13.901000] usbcore: registered new interface driver rtl8192eu
294[ 14.086000] rtw driver version=v2.0.939.20100726
295[ 14.094000] usbcore: registered new interface driver rtw_usb_drv
296[ 14.283000] rtusb init rt2870 --->
297[ 14.288000] usbcore: registered new interface driver rt2870
2981: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
299 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
300 inet 127.0.0.1/8 scope host lo
3012: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
302 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
303 inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
304[ 18.922000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
305[ 19.984000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
306[ 20.000000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
307[ 20.013000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
308[ 20.048000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
309[ 20.062000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
310[ 20.075000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
311[ 20.087000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
312[ 20.099000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
313[ 20.126000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
314[ 20.156000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
315[ 20.168000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
316[ 20.187000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:870
317[ 20.199000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:939
318[ 33.373000] Restarting system.
319
320BCM72300012
321x
322AVS 0.5.5
323B1
324PV=0000031D
325PV=00000330
326MV=000003B5
327
328M0
329SHMOO VER 1.14
330MCB
331
332PKID 20121012 003B6000 003B0000 041B103F 00001C00
333
334S300001A7
33500000D80
336+00000004
337RDLY W0 00000004
338
339RDEN W0 00000022
340
341RDQS W0
342
343 0000000000111111111122222222223333333333444444444455555555556666
344 0123456789012345678901234567890123456789012345678901234567890123
345 00 ----------+-++++++++++++++++++X+++++++++++++++++----------------
346 01 -------++++++++++++++++++X+++++++++++++++++---------------------
347 02 ------------++++++++++++++++++X++++++++++++++++++---------------
348 03 ------------+++++++++++++++++X+++++++++++++++++-----------------
349 04 -----+-+++++++++++++++++X+++++++++++++++++----------------------
350 05 ----+++++++++++++++++++X++++++++++++++++++----------------------
351 06 ------+++++++++++++++++X+++++++++++++++++-----------------------
352 07 ----------+++++++++++++++++X+++++++++++++++++-------------------
353 08 -------++++++++++++++++X++++++++++++++++------------------------
354 09 ----------+++++++++++++++++X++++++++++++++++--------------------
355 10 ----------+++++++++++++++++X++++++++++++++++--------------------
356 11 ---------+++++++++++++++++X+++++++++++++++++--------------------
357 12 ---+--+++++++++++++++++X++++++++++++++++------------------------
358 13 --+++++++++++++++++X+++++++++++++++++---------------------------
359 14 --+--++++++++++++++++X++++++++++++++++--------------------------
360 15 ---------+++++++++++++++++X++++++++++++++++---------------------
361
362
363P W0
364
365 0000000000111111111122222222223333333333444444444455555555556666
366 0123456789012345678901234567890123456789012345678901234567890123
367 00 -------+-+++++++++++++++++++X+++++++++++++++++++----------------
368 01 ----+++++++++++++++++++X+++++++++++++++++++---------------------
369 02 -------+++++++++++++++++++++X++++++++++++++++++++---------------
370 03 ---------+++++++++++++++++++X++++++++++++++++++-----------------
371 04 +-++++++++++++++++++++X+++++++++++++++++++----------------------
372 05 +--++++++++++++++++++++X+++++++++++++++++++---------------------
373 06 ---+++++++++++++++++++X+++++++++++++++++++----------------------
374 07 -----+-+++++++++++++++++++X++++++++++++++++++-------------------
375 08 -----+-++++++++++++++++++X++++++++++++++++++--------------------
376 09 -----+--++++++++++++++++++X+++++++++++++++++--------------------
377 10 --------++++++++++++++++++X++++++++++++++++++-------------------
378 11 --------++++++++++++++++++X++++++++++++++++++-------------------
379 12 --+++++++++++++++++++X+++++++++++++++++++-----------------------
380 13 --+++++++++++++++++++X++++++++++++++++++------------------------
381 14 --+++++++++++++++++++X+++++++++++++++++++-----------------------
382 15 ------++++++++++++++++++X++++++++++++++++++---------------------
383
384
385N W0
386
387 0000000000111111111122222222223333333333444444444455555555556666
388 0123456789012345678901234567890123456789012345678901234567890123
389 00 ----------++++++++++++++++++++X++++++++++++++++++++-------------
390 01 -------+-++++++++++++++++++X+++++++++++++++++-------------------
391 02 ----------+++++++++++++++++++++X++++++++++++++++++++------------
392 03 ----------+++++++++++++++++++++X++++++++++++++++++++------------
393 04 -----+-++++++++++++++++++X+++++++++++++++++---------------------
394 05 -----+++++++++++++++++++X+++++++++++++++++++--------------------
395 06 -----++++++++++++++++++X++++++++++++++++++----------------------
396 07 --------+-+++++++++++++++++++X+++++++++++++++++++---------------
397 08 ------+-++++++++++++++++X+++++++++++++++------------------------
398 09 --------++++++++++++++++++X+++++++++++++++++--------------------
399 10 --------+-+++++++++++++++++X++++++++++++++++--------------------
400 11 --------+-+++++++++++++++++X++++++++++++++++--------------------
401 12 ----+-+++++++++++++++++X++++++++++++++++------------------------
402 13 --+-++++++++++++++++X++++++++++++++++---------------------------
403 14 ----+++++++++++++++++X+++++++++++++++++-------------------------
404 15 ---------+++++++++++++++++X+++++++++++++++++--------------------
405
406
407WRDQ W0
408
409 0000000000111111111122222222223333333333444444444455555555556666
410 0123456789012345678901234567890123456789012345678901234567890123
411 00 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
412 01 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
413 02 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
414 03 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
415 04 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
416 05 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
417 06 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
418 07 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
419 08 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
420 09 +++++++++++++++++X++++++++++++++++-------------+-+++++++++++++++
421 10 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
422 11 ++++++++++++++++X++++++++++++++++-----------------++++++++++++++
423 12 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
424 13 ++++++++++++++X++++++++++++++------------------+++++++++++++++++
425 14 ++++++++++++++++X+++++++++++++++---------------+++++++++++++++++
426 15 ++++++++++++++++X+++++++++++++++----------------++++++++++++++++
427
428
429WRDM W0 00000010
430WRDM W0 0000000F
431
432
433ADDR
434
435 0000000000111111111122222222223333333333444444444455555555556666
436 0123456789012345678901234567890123456789012345678901234567890123
437 00 ++++++++++++++++++++++++++S++X+++++++++++++++++++++++++++++-----
438
439CZ#@SG
440
441BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
442Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
443Copyright (C) Broadcom Corporation.
444
445Hit any key to stop autoboot:
446MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
447Enabling NAND flash at CS2.
448BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
449Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
450INFO: Configuring LEDs for PCB rev. 5
451CPU speed: 742MHz
452Total memory(0): 512MB
453DDR Freq: 800 MHz
454DDR Mode: DDR3
455DEV TECH: 2GBIT
456DDR Width: 16
457Boot Device: SPI
458Total flash: 8MB
459
460Initializing USB.
461USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
462Saving shmoo values...
463Saved shmoo values....
464
465CFE initialized.
466Trying to start splash screen...
467No valid image found in flash0.splash - disabling splash
468
469Executing STARTUP...
470Invalid command: "cls"
471Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
472
473Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
474Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
475Starting program at 0x80451ff0
476
477[ 0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
478[ 0.000000] Fetching vars from bootloader...
479[ 0.000000] Serial number is "31D00885F64133101594"
480[ 0.000000] Replacing flash type from NAND to SPI
481[ 0.000000] found 16 vars.
482[ 0.000000] Options: moca=0 sata=1 pcie=0 usb=1
483[ 0.000000] Using 512 MB + 0 MB RAM (from CFE)
484[ 0.000000] bootconsole [early0] enabled
485[ 0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
486[ 0.000000] FPU revision is: 00130001
487[ 0.000000] Determined physical RAM map:
488[ 0.000000] memory: 10000000 @ 00000000 (usable)
489[ 0.000000] memory: 10000000 @ 20000000 (usable)
490[ 0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
491[ 0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
492[ 0.000000] Initrd not found or empty - disabling initrd
493[ 0.000000] Zone PFN ranges:
494[ 0.000000] Normal 0x00000000 -> 0x00030000
495[ 0.000000] Movable zone start PFN for each node
496[ 0.000000] Early memory PFN ranges
497[ 0.000000] 0: 0x00000000 -> 0x00010000
498[ 0.000000] 0: 0x00020000 -> 0x00030000
499[ 0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
500[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
501[ 0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
502[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
503[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
504[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
505[ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
506[ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
507[ 0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
508[ 0.000000] Hierarchical RCU implementation.
509[ 0.000000] NR_IRQS:160
510[ 0.000000] Measuring MIPS counter frequency...
511[ 0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
512[ 0.000000] Console: colour dummy device 80x25
513[ 0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
514[ 0.012000] pid_max: default: 32768 minimum: 301
515[ 0.013000] Mount-cache hash table entries: 512
516[ 0.015000] SMP: Booting CPU1...
517[ 0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
518[ 0.020000] FPU revision is: 00130001
519[ 0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
520[ 0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
521[ 0.029000] SMP: CPU1 is running
522[ 0.029000] Brought up 2 CPUs
523[ 0.033000] NET: Registered protocol family 16
524[ 0.035000] USB0: power enable is active high; overcurrent is active low
525[ 0.036000] USB1: power enable is active high; overcurrent is active low
526[ 0.053000] bio: create slab <bio-0> at 0
527[ 0.055000] SCSI subsystem initialized
528[ 0.056000] usbcore: registered new interface driver usbfs
529[ 0.057000] usbcore: registered new interface driver hub
530[ 0.058000] usbcore: registered new device driver usb
531[ 0.060000] cfg80211: Calling CRDA to update world regulatory domain
532[ 0.061000] Switching to clocksource wktmr
533[ 0.077000] NET: Registered protocol family 2
534[ 0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
535[ 0.088000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
536[ 0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
537[ 0.103000] TCP: Hash tables configured (established 16384 bind 16384)
538[ 0.109000] TCP reno registered
539[ 0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
540[ 0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
541[ 0.125000] NET: Registered protocol family 1
542[ 0.129000] RPC: Registered named UNIX socket transport module.
543[ 0.135000] RPC: Registered udp transport module.
544[ 0.140000] RPC: Registered tcp transport module.
545[ 0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
546[ 0.168000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
547[ 0.175000] NTFS driver 2.1.30 [Flags: R/O].
548[ 0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
549[ 0.185000] fuse init (API version 7.18)
550[ 0.189000] fuse init DCACHE_BUG workaround enabled
551[ 0.194000] msgmni has been set to 227
552[ 0.207000] io scheduler noop registered
553[ 0.211000] io scheduler cfq registered (default)
554[ 0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
555[ 0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
556[ 0.230000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
557[ 0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
558[ 0.244000] console [ttyS2] enabled, bootconsole disabled
559[ 0.265000] brd: module loaded
560[ 0.273000] loop: module loaded
561[ 0.277000] ahci: SSS flag set, parallel bus scan disabled
562[ 0.294000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
563[ 0.302000] ahci strict-ahci.0: flags: sntf stag clo slum part
564[ 0.313000] scsi0 : ahci_platform
565[ 0.317000] scsi1 : ahci_platform
566[ 0.321000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
567[ 0.329000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
568[ 0.339000] brcmstb_nand: NAND controller driver is loaded
569[ 0.347000] All hardware filters disabled
570[ 0.451000] bcmgenet: configuring instance #0 for internal PHY
571[ 0.477000] bcmgenet bcmgenet.0: eth0: link down
572[ 0.484000] All hardware filters disabled
573[ 0.642000] ata1: SATA link down (SStatus 0 SControl 300)
574[ 0.808000] No PHY detected, not registering interface:1
575[ 0.813000] bcmgenet: probe of bcmgenet.1 failed with error -5
576[ 0.819000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
577[ 0.827000] usbcore: registered new interface driver pegasus
578[ 0.833000] usbcore: registered new interface driver asix
579[ 0.838000] usbcore: registered new interface driver cdc_ether
580[ 0.844000] usbcore: registered new interface driver net1080
581[ 0.850000] usbcore: registered new interface driver cdc_subset
582[ 0.856000] usbcore: registered new interface driver zaurus
583[ 0.862000] usbcore: registered new interface driver cdc_ncm
584[ 0.868000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
585[ 0.875000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
586[ 0.880000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
587[ 0.919000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
588[ 0.930000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
589[ 0.936000] hub 1-0:1.0: USB hub found
590[ 0.940000] hub 1-0:1.0: 1 port detected
591[ 0.944000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
592[ 0.950000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
593[ 0.952000] ata2: SATA link down (SStatus 0 SControl 300)
594[ 0.994000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
595[ 1.005000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
596[ 1.011000] hub 2-0:1.0: USB hub found
597[ 1.015000] hub 2-0:1.0: 1 port detected
598[ 1.019000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
599[ 1.026000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
600[ 1.031000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
601[ 1.039000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
602[ 1.109000] hub 3-0:1.0: USB hub found
603[ 1.113000] hub 3-0:1.0: 1 port detected
604[ 1.117000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
605[ 1.123000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
606[ 1.130000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
607[ 1.201000] hub 4-0:1.0: USB hub found
608[ 1.205000] hub 4-0:1.0: 1 port detected
609[ 1.210000] Initializing USB Mass Storage driver...
610[ 1.215000] usbcore: registered new interface driver usb-storage
611[ 1.221000] USB Mass Storage support registered.
612[ 1.226000] mousedev: PS/2 mouse device common for all mice
613[ 1.232000] lirc_dev: IR Remote Control driver registered, major 253
614[ 1.238000] IR LIRC bridge handler initialized
615[ 1.243000] sdhci: Secure Digital Host Controller Interface driver
616[ 1.249000] sdhci: Copyright(c) Pierre Ossman
617[ 1.254000] sdhci-pltfm: SDHCI platform and OF driver helper
618[ 1.259000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
619[ 1.268000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
620[ 1.276000] usbcore: registered new interface driver usbhid
621[ 1.282000] usbhid: USB HID core driver
622[ 1.286000] TCP cubic registered
623[ 1.289000] NET: Registered protocol family 17
624[ 1.294000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
625[ 1.303000] EBI CS0: setting up SPI flash (primary)
626[ 1.308000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
627[ 1.315000] m25p80 spi0.0: found mx25l6405d, expected m25p80
628[ 1.321000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
629[ 1.346000] Creating 8 MTD partitions on "spi0.0":
630[ 1.351000] 0x000000000000-0x000000100000 : "bootldr"
631[ 1.357000] 0x000000100000-0x000000110000 : "macadr"
632[ 1.363000] 0x000000110000-0x000000120000 : "nvram"
633[ 1.370000] 0x000000120000-0x000000180000 : "branding"
634[ 1.380000] 0x000000180000-0x000000200000 : "splash"
635[ 1.386000] 0x000000200000-0x000000600000 : "ro_kernel"
636[ 1.393000] 0x000000600000-0x000000610000 : "env"
637[ 1.399000] 0x000000610000-0x000000800000 : "bsec"
638[ 1.405000] EBI CS2: setting up NAND flash
639[ 1.409000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
640[ 1.418000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
641[ 1.418000]
642[ 1.429000] Bad block table found at page 131008, version 0x01
643[ 1.435000] Bad block table found at page 130944, version 0x01
644[ 1.454000] Creating 3 MTD partitions on "brcmnand.0":
645[ 1.459000] 0x000000000000-0x000000800000 : "kernel"
646[ 1.466000] 0x000000800000-0x000001000000 : "backup_kernel"
647[ 1.473000] 0x000001000000-0x000010000000 : "raw"
648
649[ 1.489000] Freeing unused kernel memory: 1996k freed
650[ 1.674000] brcmfb: addr = 0xac800000 offset = 0x0
651[ 1.681000] fb0: Broadcom frame buffer device
652Try to attach UBI ...
653[ 1.726000] UBI: attaching mtd10 to ubi0
654[ 1.730000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
655[ 1.736000] UBI: logical eraseblock size: 126976 bytes
656[ 1.741000] UBI: smallest flash I/O unit: 2048
657[ 1.746000] UBI: VID header offset: 2048 (aligned 2048)
658[ 1.752000] UBI: data offset: 4096
659
660(none) login: [ 3.236000] UBI: max. sequence number: 37734
661[ 3.261000] UBI: attached mtd10 to ubi0
662[ 3.265000] UBI: MTD device name: "raw"
663[ 3.270000] UBI: MTD device size: 240 MiB
664[ 3.275000] UBI: number of good PEBs: 1916
665[ 3.280000] UBI: number of bad PEBs: 4
666[ 3.284000] UBI: number of corrupted PEBs: 0
667[ 3.289000] UBI: max. allowed volumes: 128
668[ 3.294000] UBI: wear-leveling threshold: 4096
669[ 3.299000] UBI: number of internal volumes: 1
670[ 3.303000] UBI: number of user volumes: 2
671[ 3.308000] UBI: available PEBs: 42
672[ 3.312000] UBI: total number of reserved PEBs: 1874
673[ 3.317000] UBI: number of PEBs reserved for bad PEB handling: 19
674[ 3.324000] UBI: max/mean erase counter: 25/19
675[ 3.328000] UBI: image sequence number: 1320996868
676[ 3.333000] UBI: background thread "ubi_bgt0d" started, PID 513
677UBI was attached.
678[ 3.433000] UBIFS: recovery needed
679[ 3.562000] UBIFS: recovery completed
680[ 3.565000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
681[ 3.572000] UBIFS: file system size: 133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
682[ 3.580000] UBIFS: journal size: 6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
683[ 3.587000] UBIFS: media format: w4/r0 (latest is w4/r0)
684[ 3.593000] UBIFS: default compressor: lzo
685[ 3.597000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
686Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
687rootfs /dev/mtdblock11 mount successful
688Fastboot enabled
689Framebuffer custom resolution 0x0 incorrect
690Current framebuffer size is 720x576
691Sun Jan 1 01:01:00 UTC 2017
692deviceinfo:
693mac addr : E4:27:71:41:32:00
694serial num: 31D00885F64133101594
695board name: SML-482
696hw rev : 0
697features : cvbs hdmi spdif
698board : sml723x
699family : bcm97230
700S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
701Setup networking...
702[ 3.883000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
703[ 3.963000] bcmgenet bcmgenet.0: eth0: link down
704Initial network configuration:
7051: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
706 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
707 inet 127.0.0.1/8 scope host lo
7082: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
709 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
710Skip DHCP setup for fastboot
711Wait for USB devices...
712[ 5.699000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
713No USB storages found.
714Remove address on eth0
715Start STB application.
716The system is going down NOW!
717Sent SIGTERM to all processes
718Sent SIGKILL to all processes
719vm.min_free_kbytes = 8192
720vm.overcommit_memory = 1
721net.ipv4.conf.all.force_igmp_version = 2
722Starting syslogd ...
723
724SML-482 login: [ 11.210000] nexus: module license 'Proprietary' taints kernel.
725[ 11.216000] Disabling lock debugging due to kernel taint
726[ 11.330000] nexus driver initialized
727[ 12.079000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
728[ 13.394000] RTL871X: module init start
729[ 13.397000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
730[ 13.403000] RTL871X: build time: Jul 23 2020 16:07:06
731[ 13.409000] usbcore: registered new interface driver rtl8188eu
732[ 13.415000] RTL871X: module init ret=0
733[ 13.802000] usbcore: registered new interface driver rtl8192eu
734[ 13.965000] rtw driver version=v2.0.939.20100726
735[ 13.971000] usbcore: registered new interface driver rtw_usb_drv
736[ 14.214000] rtusb init rt2870 --->
737[ 14.219000] usbcore: registered new interface driver rt2870
7381: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
739 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
740 inet 127.0.0.1/8 scope host lo
7412: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
742 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
743 inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
744[ 18.739000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
745[ 19.347000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
746[ 19.816000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
747[ 19.828000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
748[ 29.881000] ------------[ cut here ]------------
749[ 29.886000] WARNING: at net/ipv4/tcp.c:1482 tcp_recvmsg+0x15c/0x908()
750[ 29.893000] recvmsg bug: copied 0 seq 366A3635 rcvnxt 366A4CB5 fl 0
751[ 29.899000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
752[ 29.908000] Call Trace:
753[ 29.910000] [<8046177c>] dump_stack+0x8/0x34
754[ 29.914000] [<80020cf4>] warn_slowpath_common+0x78/0xa4
755[ 29.920000] [<80020d4c>] warn_slowpath_fmt+0x2c/0x38
756[ 29.925000] [<803c7fe8>] tcp_recvmsg+0x15c/0x908
757[ 29.929000] [<803e8980>] inet_recvmsg+0x80/0x9c
758[ 29.934000] [<80381104>] sock_aio_read+0x10c/0x124
759[ 29.939000] [<800ae3a0>] do_sync_read+0xa8/0xf8
760[ 29.943000] [<800aeb64>] vfs_read+0xc0/0x14c
761[ 29.948000] [<800aefcc>] sys_read+0x50/0x8c
762[ 29.952000] [<8000d0e8>] stack_done+0x20/0x44
763[ 29.956000]
764[ 29.958000] ---[ end trace 2b4c6e0470fbc4ab ]---
765[ 39.235000] Break instruction in kernel code[#1]:
766[ 39.240000] Cpu 1
767[ 39.242000] $ 0 : 00000000 10008b00 00000001 0e014c1a
768[ 39.248000] $ 4 : afc73ed8 3b9aca00 00000027 00000026
769[ 39.253000] $ 8 : 00008f9e 3fa7145a 25189170 ffffffff
770[ 39.258000] $12 : 80550000 005075d0 762673d0 004e9b90
771[ 39.264000] $16 : 8160e630 80782630 805567e8 80780000
772[ 39.269000] $20 : 00000027 0e014c1a 00000001 00000004
773[ 39.274000] $24 : 00000000 8004f564
774[ 39.280000] $28 : afc72000 afc73ec0 80556a5c 80061cf8
775[ 39.285000] Hi : 0e014c1a
776[ 39.288000] Lo : 00000001
777[ 39.291000] epc : 80061d04 tick_nohz_idle_exit+0x90/0x278
778[ 39.296000] Tainted: P W O
779[ 39.300000] ra : 80061cf8 tick_nohz_idle_exit+0x84/0x278
780[ 39.306000] Status: 10008b02 KERNEL EXL
781[ 39.310000] Cause : 00800024
782[ 39.313000] PrId : 0002a064 (Broadcom BMIPS4380)
783[ 39.318000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
784[ 39.326000] Process swapper/1 (pid: 0, threadinfo=afc72000, task=afc44d68, tls=00000000)
785[ 39.334000] Stack : 80550000 00411600 afc72000 afc73ef0 80790000 80061bc8 0e014c1a 00000027
786[ 39.343000] 807857c4 00000002 805567e8 80780000 80554940 00411600 804e0804 804e0818
787[ 39.351000] 80790000 80005f94 8160f2c0 afc73d38 80790000 00000000 80554940 8160f2c0
788[ 39.360000] afc73d38 80790000 00000000 80457ec4 00000000 00000000 00000000 00000000
789[ 39.368000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
790[ 39.377000] ...
791[ 39.379000] Call Trace:
792[ 39.382000] [<80061d04>] tick_nohz_idle_exit+0x90/0x278
793[ 39.387000] [<80005f94>] cpu_idle+0xd8/0xe8
794[ 39.391000] [<80457ec4>] bmips_secondary_reentry+0x0/0x2c
795[ 39.397000]
796[ 39.398000]
797[ 39.398000] Code: 8fb50018 8fb4001c 8e020054 <5040000d> 8e020040 03d7f021 02201021 8fd10000 00518821
798[ 39.410000] ---[ end trace 2b4c6e0470fbc4ac ]---
799[ 39.415000] Kernel panic - not syncing: Attempted to kill the idle task!
800[ 39.421000] Rebooting in 5 seconds..
801BCM72300012
802x
803AVS 0.5.5
804B1
805PV=0000031E
806PV=00000328
807MV=000003AE
808
809M0
810SHMOO VER 1.14
811MCB
812
813PKID 20121012 003B6000 003B0000 041B103F 00001C00
814
815S30000177
81600000E60
817+00000004
818RDLY W0 00000004
819
820RDEN W0 0000001E
821
822RDQS W0
823
824 0000000000111111111122222222223333333333444444444455555555556666
825 0123456789012345678901234567890123456789012345678901234567890123
826 00 --------------++++++++++++++++++X+++++++++++++++++--------------
827 01 ----------+++++++++++++++++X+++++++++++++++++-------------------
828 02 -------------+++++++++++++++++++X++++++++++++++++++-------------
829 03 --------------++++++++++++++++++X+++++++++++++++++--------------
830 04 ---------+++++++++++++++++X+++++++++++++++++--------------------
831 05 --------++++++++++++++++++X++++++++++++++++++-------------------
832 06 --------+++++++++++++++++X+++++++++++++++++---------------------
833 07 -------------+++++++++++++++++X++++++++++++++++-----------------
834 08 ---------++++++++++++++++X++++++++++++++++----------------------
835 09 ---------+-+++++++++++++++++X+++++++++++++++++------------------
836 10 ------------++++++++++++++++X++++++++++++++++-------------------
837 11 -----------+++++++++++++++++X+++++++++++++++++------------------
838 12 -------+++++++++++++++++X+++++++++++++++++----------------------
839 13 ------++++++++++++++++X++++++++++++++++-------------------------
840 14 ------+++++++++++++++++X+++++++++++++++++-----------------------
841 15 ----------++++++++++++++++++X+++++++++++++++++------------------
842
843
844P W0
845
846 0000000000111111111122222222223333333333444444444455555555556666
847 0123456789012345678901234567890123456789012345678901234567890123
848 00 ---------+-++++++++++++++++++++X+++++++++++++++++++-------------
849 01 -----++++++++++++++++++++X+++++++++++++++++++-------------------
850 02 ---------+-++++++++++++++++++++X+++++++++++++++++++-------------
851 03 -----------+++++++++++++++++++X+++++++++++++++++++--------------
852 04 ---+-+++++++++++++++++++X+++++++++++++++++++--------------------
853 05 -----++++++++++++++++++++X+++++++++++++++++++-------------------
854 06 ------+++++++++++++++++++X++++++++++++++++++--------------------
855 07 -------+-+++++++++++++++++++X++++++++++++++++++-----------------
856 08 ----------++++++++++++++++++X+++++++++++++++++------------------
857 09 -----------+++++++++++++++++X+++++++++++++++++------------------
858 10 -----------++++++++++++++++++X+++++++++++++++++-----------------
859 11 -----------+-+++++++++++++++++X++++++++++++++++-----------------
860 12 ----+-++++++++++++++++++X++++++++++++++++++---------------------
861 13 --+---++++++++++++++++++X++++++++++++++++++---------------------
862 14 -------+-+++++++++++++++++X++++++++++++++++---------------------
863 15 ----------++++++++++++++++++X+++++++++++++++++------------------
864
865
866N W0
867
868 0000000000111111111122222222223333333333444444444455555555556666
869 0123456789012345678901234567890123456789012345678901234567890123
870 00 -------------++++++++++++++++++++X+++++++++++++++++++-----------
871 01 -----------++++++++++++++++++X+++++++++++++++++-----------------
872 02 -------------++++++++++++++++++++X++++++++++++++++++++----------
873 03 -----------+-++++++++++++++++++++X++++++++++++++++++++----------
874 04 ---------++++++++++++++++++X++++++++++++++++++------------------
875 05 -------+-++++++++++++++++++X++++++++++++++++++------------------
876 06 -------++++++++++++++++++X++++++++++++++++++--------------------
877 07 -----------+-+++++++++++++++++++X++++++++++++++++++-------------
878 08 -------+-++++++++++++++++X++++++++++++++++----------------------
879 09 ---------++++++++++++++++++X++++++++++++++++++------------------
880 10 ---------+-+++++++++++++++++X+++++++++++++++++------------------
881 11 ---------+-+++++++++++++++++X+++++++++++++++++------------------
882 12 ---+-++++++++++++++++++X++++++++++++++++++----------------------
883 13 ---++++++++++++++++++X+++++++++++++++++-------------------------
884 14 ---+-+++++++++++++++++X+++++++++++++++++------------------------
885 15 --------+-++++++++++++++++++X+++++++++++++++++------------------
886
887
888WRDQ W0
889
890 0000000000111111111122222222223333333333444444444455555555556666
891 0123456789012345678901234567890123456789012345678901234567890123
892 00 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
893 01 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
894 02 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
895 03 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
896 04 +++++++++++++++X++++++++++++++-----------------+++++++++++++++++
897 05 ++++++++++++++++X++++++++++++++++---------------++++++++++++++++
898 06 ++++++++++++++++X+++++++++++++++----------------++++++++++++++++
899 07 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
900 08 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
901 09 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
902 10 +++++++++++++++++X++++++++++++++++--------------++++++++++++++++
903 11 ++++++++++++++++X++++++++++++++++----------------+-+++++++++++++
904 12 +++++++++++++++X+++++++++++++++-----------------++++++++++++++++
905 13 ++++++++++++++X++++++++++++++------------------+++++++++++++++++
906 14 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
907 15 ++++++++++++++++X++++++++++++++++----------------+++++++++++++++
908
909
910WRDM W0 00000010
911WRDM W0 0000000F
912
913
914ADDR
915
916 0000000000111111111122222222223333333333444444444455555555556666
917 0123456789012345678901234567890123456789012345678901234567890123
918 00 +++++++++++++++++++++++++++SX+++++++++++++++++++++++++++++------
919
920CZ#@SG
921
922BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
923Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
924Copyright (C) Broadcom Corporation.
925
926Hit any key to stop autoboot:
927MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
928Enabling NAND flash at CS2.
929BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
930Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
931INFO: Configuring LEDs for PCB rev. 5
932CPU speed: 742MHz
933Total memory(0): 512MB
934DDR Freq: 800 MHz
935DDR Mode: DDR3
936DEV TECH: 2GBIT
937DDR Width: 16
938Boot Device: SPI
939Total flash: 8MB
940
941Initializing USB.
942USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
943Saving shmoo values...
944Saved shmoo values....
945
946CFE initialized.
947Trying to start splash screen...
948No valid image found in flash0.splash - disabling splash
949
950Executing STARTUP...
951Invalid command: "cls"
952Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
953
954Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
955Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
956Starting program at 0x80451ff0
957
958[ 0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
959[ 0.000000] Fetching vars from bootloader...
960[ 0.000000] Serial number is "31D00885F64133101594"
961[ 0.000000] Replacing flash type from NAND to SPI
962[ 0.000000] found 16 vars.
963[ 0.000000] Options: moca=0 sata=1 pcie=0 usb=1
964[ 0.000000] Using 512 MB + 0 MB RAM (from CFE)
965[ 0.000000] bootconsole [early0] enabled
966[ 0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
967[ 0.000000] FPU revision is: 00130001
968[ 0.000000] Determined physical RAM map:
969[ 0.000000] memory: 10000000 @ 00000000 (usable)
970[ 0.000000] memory: 10000000 @ 20000000 (usable)
971[ 0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
972[ 0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
973[ 0.000000] Initrd not found or empty - disabling initrd
974[ 0.000000] Zone PFN ranges:
975[ 0.000000] Normal 0x00000000 -> 0x00030000
976[ 0.000000] Movable zone start PFN for each node
977[ 0.000000] Early memory PFN ranges
978[ 0.000000] 0: 0x00000000 -> 0x00010000
979[ 0.000000] 0: 0x00020000 -> 0x00030000
980[ 0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
981[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
982[ 0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
983[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
984[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
985[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
986[ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
987[ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
988[ 0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
989[ 0.000000] Hierarchical RCU implementation.
990[ 0.000000] NR_IRQS:160
991[ 0.000000] Measuring MIPS counter frequency...
992[ 0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
993[ 0.000000] Console: colour dummy device 80x25
994[ 0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
995[ 0.012000] pid_max: default: 32768 minimum: 301
996[ 0.013000] Mount-cache hash table entries: 512
997[ 0.015000] SMP: Booting CPU1...
998[ 0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
999[ 0.020000] FPU revision is: 00130001
1000[ 0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
1001[ 0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
1002[ 0.029000] SMP: CPU1 is running
1003[ 0.029000] Brought up 2 CPUs
1004[ 0.033000] NET: Registered protocol family 16
1005[ 0.035000] USB0: power enable is active high; overcurrent is active low
1006[ 0.036000] USB1: power enable is active high; overcurrent is active low
1007[ 0.053000] bio: create slab <bio-0> at 0
1008[ 0.055000] SCSI subsystem initialized
1009[ 0.056000] usbcore: registered new interface driver usbfs
1010[ 0.057000] usbcore: registered new interface driver hub
1011[ 0.058000] usbcore: registered new device driver usb
1012[ 0.060000] cfg80211: Calling CRDA to update world regulatory domain
1013[ 0.061000] Switching to clocksource wktmr
1014[ 0.077000] NET: Registered protocol family 2
1015[ 0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
1016[ 0.089000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
1017[ 0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
1018[ 0.103000] TCP: Hash tables configured (established 16384 bind 16384)
1019[ 0.109000] TCP reno registered
1020[ 0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
1021[ 0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
1022[ 0.125000] NET: Registered protocol family 1
1023[ 0.129000] RPC: Registered named UNIX socket transport module.
1024[ 0.135000] RPC: Registered udp transport module.
1025[ 0.140000] RPC: Registered tcp transport module.
1026[ 0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
1027[ 0.169000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
1028[ 0.175000] NTFS driver 2.1.30 [Flags: R/O].
1029[ 0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
1030[ 0.186000] fuse init (API version 7.18)
1031[ 0.190000] fuse init DCACHE_BUG workaround enabled
1032[ 0.195000] msgmni has been set to 227
1033[ 0.207000] io scheduler noop registered
1034[ 0.211000] io scheduler cfq registered (default)
1035[ 0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1036[ 0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
1037[ 0.231000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
1038[ 0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
1039[ 0.244000] console [ttyS2] enabled, bootconsole disabled
1040[ 0.265000] brd: module loaded
1041[ 0.274000] loop: module loaded
1042[ 0.278000] ahci: SSS flag set, parallel bus scan disabled
1043[ 0.295000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
1044[ 0.303000] ahci strict-ahci.0: flags: sntf stag clo slum part
1045[ 0.314000] scsi0 : ahci_platform
1046[ 0.318000] scsi1 : ahci_platform
1047[ 0.322000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
1048[ 0.330000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
1049[ 0.340000] brcmstb_nand: NAND controller driver is loaded
1050[ 0.348000] All hardware filters disabled
1051[ 0.452000] bcmgenet: configuring instance #0 for internal PHY
1052[ 0.478000] bcmgenet bcmgenet.0: eth0: link down
1053[ 0.485000] All hardware filters disabled
1054[ 0.643000] ata1: SATA link down (SStatus 0 SControl 300)
1055[ 0.809000] No PHY detected, not registering interface:1
1056[ 0.814000] bcmgenet: probe of bcmgenet.1 failed with error -5
1057[ 0.820000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
1058[ 0.828000] usbcore: registered new interface driver pegasus
1059[ 0.834000] usbcore: registered new interface driver asix
1060[ 0.839000] usbcore: registered new interface driver cdc_ether
1061[ 0.845000] usbcore: registered new interface driver net1080
1062[ 0.851000] usbcore: registered new interface driver cdc_subset
1063[ 0.857000] usbcore: registered new interface driver zaurus
1064[ 0.863000] usbcore: registered new interface driver cdc_ncm
1065[ 0.869000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1066[ 0.876000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
1067[ 0.881000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
1068[ 0.920000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
1069[ 0.931000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
1070[ 0.937000] hub 1-0:1.0: USB hub found
1071[ 0.941000] hub 1-0:1.0: 1 port detected
1072[ 0.945000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
1073[ 0.950000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
1074[ 0.953000] ata2: SATA link down (SStatus 0 SControl 300)
1075[ 0.995000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
1076[ 1.006000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
1077[ 1.012000] hub 2-0:1.0: USB hub found
1078[ 1.016000] hub 2-0:1.0: 1 port detected
1079[ 1.020000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1080[ 1.027000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
1081[ 1.032000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
1082[ 1.040000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
1083[ 1.110000] hub 3-0:1.0: USB hub found
1084[ 1.114000] hub 3-0:1.0: 1 port detected
1085[ 1.118000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
1086[ 1.124000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
1087[ 1.131000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
1088[ 1.202000] hub 4-0:1.0: USB hub found
1089[ 1.206000] hub 4-0:1.0: 1 port detected
1090[ 1.211000] Initializing USB Mass Storage driver...
1091[ 1.216000] usbcore: registered new interface driver usb-storage
1092[ 1.222000] USB Mass Storage support registered.
1093[ 1.227000] mousedev: PS/2 mouse device common for all mice
1094[ 1.233000] lirc_dev: IR Remote Control driver registered, major 253
1095[ 1.239000] IR LIRC bridge handler initialized
1096[ 1.244000] sdhci: Secure Digital Host Controller Interface driver
1097[ 1.250000] sdhci: Copyright(c) Pierre Ossman
1098[ 1.254000] sdhci-pltfm: SDHCI platform and OF driver helper
1099[ 1.260000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
1100[ 1.269000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
1101[ 1.277000] usbcore: registered new interface driver usbhid
1102[ 1.283000] usbhid: USB HID core driver
1103[ 1.287000] TCP cubic registered
1104[ 1.290000] NET: Registered protocol family 17
1105[ 1.295000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
1106[ 1.303000] EBI CS0: setting up SPI flash (primary)
1107[ 1.308000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
1108[ 1.315000] m25p80 spi0.0: found mx25l6405d, expected m25p80
1109[ 1.321000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
1110[ 1.349000] Creating 8 MTD partitions on "spi0.0":
1111[ 1.354000] 0x000000000000-0x000000100000 : "bootldr"
1112[ 1.361000] 0x000000100000-0x000000110000 : "macadr"
1113[ 1.367000] 0x000000110000-0x000000120000 : "nvram"
1114[ 1.373000] 0x000000120000-0x000000180000 : "branding"
1115[ 1.379000] 0x000000180000-0x000000200000 : "splash"
1116[ 1.390000] 0x000000200000-0x000000600000 : "ro_kernel"
1117[ 1.396000] 0x000000600000-0x000000610000 : "env"
1118[ 1.402000] 0x000000610000-0x000000800000 : "bsec"
1119[ 1.418000] EBI CS2: setting up NAND flash
1120[ 1.423000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
1121[ 1.431000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
1122[ 1.431000]
1123[ 1.442000] Bad block table found at page 131008, version 0x01
1124[ 1.448000] Bad block table found at page 130944, version 0x01
1125[ 1.470000] Creating 3 MTD partitions on "brcmnand.0":
1126[ 1.475000] 0x000000000000-0x000000800000 : "kernel"
1127[ 1.486000] 0x000000800000-0x000001000000 : "backup_kernel"
1128[ 1.493000] 0x000001000000-0x000010000000 : "raw"
1129
1130[ 1.504000] Freeing unused kernel memory: 1996k freed
1131[ 1.669000] brcmfb: addr = 0xac800000 offset = 0x0
1132[ 1.676000] fb0: Broadcom frame buffer device
1133Try to attach UBI ...
1134[ 1.720000] UBI: attaching mtd10 to ubi0
1135[ 1.724000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
1136[ 1.731000] UBI: logical eraseblock size: 126976 bytes
1137[ 1.736000] UBI: smallest flash I/O unit: 2048
1138[ 1.741000] UBI: VID header offset: 2048 (aligned 2048)
1139[ 1.747000] UBI: data offset: 4096
1140
1141(none) login: [ 3.251000] UBI: max. sequence number: 37738
1142[ 3.276000] UBI: attached mtd10 to ubi0
1143[ 3.280000] UBI: MTD device name: "raw"
1144[ 3.285000] UBI: MTD device size: 240 MiB
1145[ 3.290000] UBI: number of good PEBs: 1916
1146[ 3.295000] UBI: number of bad PEBs: 4
1147[ 3.300000] UBI: number of corrupted PEBs: 0
1148[ 3.304000] UBI: max. allowed volumes: 128
1149[ 3.309000] UBI: wear-leveling threshold: 4096
1150[ 3.314000] UBI: number of internal volumes: 1
1151[ 3.319000] UBI: number of user volumes: 2
1152[ 3.323000] UBI: available PEBs: 42
1153[ 3.328000] UBI: total number of reserved PEBs: 1874
1154[ 3.333000] UBI: number of PEBs reserved for bad PEB handling: 19
1155[ 3.339000] UBI: max/mean erase counter: 25/19
1156[ 3.343000] UBI: image sequence number: 1320996868
1157[ 3.348000] UBI: background thread "ubi_bgt0d" started, PID 513
1158UBI was attached.
1159[ 3.448000] UBIFS: recovery needed
1160[ 3.591000] UBIFS: recovery completed
1161[ 3.594000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
1162[ 3.601000] UBIFS: file system size: 133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
1163[ 3.609000] UBIFS: journal size: 6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
1164[ 3.616000] UBIFS: media format: w4/r0 (latest is w4/r0)
1165[ 3.622000] UBIFS: default compressor: lzo
1166[ 3.626000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
1167Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
1168rootfs /dev/mtdblock11 mount successful
1169Fastboot enabled
1170Framebuffer custom resolution 0x0 incorrect
1171Current framebuffer size is 720x576
1172Sun Jan 1 01:01:00 UTC 2017
1173deviceinfo:
1174mac addr : E4:27:71:41:32:00
1175serial num: 31D00885F64133101594
1176board name: SML-482
1177hw rev : 0
1178features : cvbs hdmi spdif
1179board : sml723x
1180family : bcm97230
1181S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
1182Setup networking...
1183[ 3.911000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
1184[ 3.991000] bcmgenet bcmgenet.0: eth0: link down
1185Initial network configuration:
11861: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
1187 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
1188 inet 127.0.0.1/8 scope host lo
11892: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
1190 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
1191Skip DHCP setup for fastboot
1192Wait for USB devices...
1193[ 5.601000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
1194No USB storages found.
1195Remove address on eth0
1196Start STB application.
1197The system is going down NOW!
1198Sent SIGTERM to all processes
1199Sent SIGKILL to all processes
1200vm.min_free_kbytes = 8192
1201vm.overcommit_memory = 1
1202net.ipv4.conf.all.force_igmp_version = 2
1203Starting syslogd ...
1204
1205SML-482 login: [ 11.271000] nexus: module license 'Proprietary' taints kernel.
1206[ 11.277000] Disabling lock debugging due to kernel taint
1207[ 11.392000] nexus driver initialized
1208[ 12.150000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
1209[ 13.465000] RTL871X: module init start
1210[ 13.469000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
1211[ 13.474000] RTL871X: build time: Jul 23 2020 16:07:06
1212[ 13.480000] usbcore: registered new interface driver rtl8188eu
1213[ 13.486000] RTL871X: module init ret=0
1214[ 13.946000] usbcore: registered new interface driver rtl8192eu
1215[ 14.086000] rtw driver version=v2.0.939.20100726
1216[ 14.091000] usbcore: registered new interface driver rtw_usb_drv
1217[ 14.286000] rtusb init rt2870 --->
1218[ 14.291000] usbcore: registered new interface driver rt2870
12191: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
1220 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
1221 inet 127.0.0.1/8 scope host lo
12222: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
1223 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
1224 inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
1225[ 18.836000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
1226[ 19.444000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_edid.c:4264
1227[ 19.940000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
1228[ 19.952000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
1229[ 29.297000] CPU 1 Unable to handle kernel paging request at virtual address ffffb568, epc == afd49d94, ra == afd49d80
1230[ 29.308000] Oops[#1]:
1231[ 29.308000] Cpu 1
1232[ 29.308000] $ 0 : 00000000 00000001 afb01a48 afd1fb58
1233[ 29.317000] $ 4 : 00000001 af123c40 fffbde91 00000000
1234[ 29.323000] $ 8 : 0000e77c fffbde7a 00000001 00000001
1235[ 29.323000] $12 : 00000001 00000000 00000400 81000000
1236[ 29.323000] $16 : ffffffff 00000002 00000000 80556a60
1237[ 29.323000] $20 : 00000000 00000024 8ed1cc00 800e0000
1238[ 29.323000] $24 : 00000001 0000000c
1239[ 29.323000] $28 : afb00000 afb01a58 af16d000 afd49d80
1240[ 29.323000] Hi : 00000000
1241[ 29.323000] Lo : 00000000
1242[ 29.323000] epc : afd49d94 0xafd49d94
1243[ 29.323000] Tainted: P O
1244[ 29.323000] ra : afd49d80 0xafd49d80
1245[ 29.323000] Status: 10008b03 KERNEL EXL IE
1246[ 29.323000] Cause : 00800008
1247[ 29.323000] BadVA : ffffb568
1248[ 29.323000] PrId : 0002a064 (Broadcom BMIPS4380)
1249[ 29.323000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
1250[ 29.323000] Process nc::Thread (pid: 1028, threadinfo=afb00000, task=afd1fb58, tls=59217940)
1251[ 29.323000] Stack : 00011200 afcc6280 8003f724 8007b798 00000ffe af1a11c0 00000002 8022ebb0
1252[ 29.323000] 80550000 af972408 00000000 80556a5c 80782b98 00000000 af1a11c0 8022ed00
1253[ 29.323000] afcc6280 00000000 00000010 00000024 af1a11c0 800e262c afa07d08 afa07cc8
1254[ 29.323000] af972588 af9723c8 0000000f af972448 afa41208 805566c0 805566c0 00000000
1255[ 29.323000] afa41208 af1a11c0 805566c0 00000000 00000000 8ed1cc00 800e0000 800db940
1256[ 29.323000] ...
1257[ 29.323000] Call Trace:
1258[ 29.323000] [<8003f724>] autoremove_wake_function+0x0/0x44
1259[ 29.323000] [<8007b798>] mempool_alloc+0x60/0x150
1260[ 29.323000] [<8022ebb0>] generic_make_request+0x14/0xb4
1261[ 29.323000] [<8022ed00>] submit_bio+0xb0/0x150
1262[ 29.323000] [<800e262c>] bio_alloc_bioset+0x58/0xfc
1263[ 29.323000] [<800e0000>] __find_get_block+0x11c/0x360
1264[ 29.323000] [<800db940>] submit_bh+0x1ec/0x224
1265[ 29.323000] [<800dcbd8>] end_buffer_read_sync+0x0/0x7c
1266[ 29.323000] [<800dbb2c>] ll_rw_block+0x1b4/0x1f8
1267[ 29.323000] [<80005c10>] do_IRQ+0x18/0x28
1268[ 29.323000] [<800283ec>] irq_exit+0x60/0xc8
1269[ 29.323000] [<80177d98>] squashfs_read_data+0x5b8/0x810
1270[ 29.323000] [<8007f024>] __alloc_pages_nodemask+0x110/0x610
1271[ 29.323000] [<801781f8>] squashfs_cache_get+0x208/0x3f8
1272[ 29.323000] [<80179c04>] squashfs_readpage+0x7a4/0xbb0
1273[ 29.323000] [<8007f024>] __alloc_pages_nodemask+0x110/0x610
1274[ 29.323000] [<800831dc>] __do_page_cache_readahead+0x230/0x28c
1275[ 29.323000] [<800833a4>] ra_submit+0x28/0x34
1276[ 29.323000] [<8007a418>] filemap_fault+0x1b0/0x4e8
1277[ 29.323000] [<8009491c>] __do_fault+0xd4/0x59c
1278[ 29.323000] [<80043468>] enqueue_hrtimer+0x24/0x6c
1279[ 29.323000] [<80097e1c>] handle_pte_fault+0x164/0x900
1280[ 29.323000] [<80098690>] handle_mm_fault+0xd8/0x120
1281[ 29.323000] [<8000f1b4>] do_page_fault+0x114/0x360
1282[ 29.323000] [<80027eec>] __do_softirq+0x104/0x1b4
1283[ 29.323000] [<8002818c>] do_softirq+0x54/0x6c
1284[ 29.323000] [<80005c10>] do_IRQ+0x18/0x28
1285[ 29.323000] [<800283ec>] irq_exit+0x60/0xc8
1286[ 29.323000] [<80003100>] plat_irq_dispatch+0xd4/0xfc
1287[ 29.323000] [<80003e80>] ret_from_exception+0x0/0x28
1288[ 29.323000]
1289[ 29.323000]
1290[ 29.323000] Code: 00000002 afcc6200 afc15440 <8007b568> 8007b954 00000000 afd49da0 afd49da0 00000000
1291[ 29.610000] ---[ end trace 285a019508ea5839 ]---
1292[ 29.615000] ------------[ cut here ]------------
1293[ 29.620000] WARNING: at kernel/exit.c:878 do_exit+0x6a8/0x6b0()
1294[ 29.626000] Modules linked in: rt5572sta(O) 8192cu(O) 8192eu(O) 8188eu(O) nexus(PO) brcmfb(O)
1295[ 29.635000] Call Trace:
1296[ 29.637000] [<8046177c>] dump_stack+0x8/0x34
1297[ 29.641000] [<80020cf4>] warn_slowpath_common+0x78/0xa4
1298[ 29.647000] [<80020da8>] warn_slowpath_null+0x18/0x24
1299[ 29.652000] [<800259d0>] do_exit+0x6a8/0x6b0
1300[ 29.656000] [<80009bec>] default_cu2_call+0x0/0x4c
1301[ 29.661000]
1302[ 29.662000] ---[ end trace 285a019508ea583a ]---
1303