· 6 years ago · Dec 25, 2019, 01:16 PM
1login as: root
2root@192.168.0.19's password:
3##############################################
4# CoreELEC #
5# https://coreelec.org #
6##############################################
7
8CoreELEC (official): nightly_20191224 (Amlogic-ng.arm)
9CoreELEC:~ # dmesg
10[ 0.000000@0] Booting Linux on physical CPU 0x0
11[ 0.000000@0] Linux version 4.9.113 (relkai@hammbwcor01) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Wed Dec 25 01:28:22 CET 2019
12[ 0.000000@0] Boot CPU: AArch64 Processor [411fd050]
13[ 0.000000@0] efi: Getting EFI parameters from FDT:
14[ 0.000000@0] efi: UEFI not found.
15[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
16[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
17[ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
18[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB
19[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB
20[ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
21[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000078000000, size 128 MiB
22[ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
23[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000075000000, size 40 MiB
24[ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
25[ 0.000000@0] Reserved memory: created DMA memory pool at 0x0000000075000000, size 0 MiB
26[ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
27[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000060400000, size 308 MiB
28[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
29[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
30[ 0.000000@0] Reserved memory: created CMA memory pool at 0x000000005e400000, size 32 MiB
31[ 0.000000@0] OF: reserved mem: initialized node linux,vm0_cma, compatible id shared-dma-pool
32[ 0.000000@0] cma: Reserved 8 MiB at 0x0000000074800000
33[ 0.000000@0] On node 0 totalpages: 524288
34[ 0.000000@0] DMA zone: 8192 pages used for memmap
35[ 0.000000@0] DMA zone: 0 pages reserved
36[ 0.000000@0] DMA zone: 524288 pages, LIFO batch:31
37[ 0.000000@0] psci: probing for conduit method from DT.
38[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
39[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
40[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
41[ 0.000000@0] psci: SMC Calling Convention v1.1
42[ 0.000000@0] percpu: Embedded 22 pages/cpu @ffffffc074733000 s51992 r8192 d29928 u90112
43[ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096
44[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
45[ 0.000000@0] Detected VIPT I-cache on CPU0
46[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
47[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=0 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 mac=90:0e:b3:10:f5:68 androidboot.mac=90:0e:b3:10:f5:68 androidboot.rpmb_state=0 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend enable_wol=1 hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto
48[ 0.000000@0] fb: osd0
49[ 0.000000@0] fb: loaded
50[ 0.000000@0] fb: 0x3d800000
51[ 0.000000@0] vout: 1080p60hz
52[ 0.000000@0] vout: enable: 1
53[ 0.000000@0] lcd: panel_type: lcd_1
54[ 0.000000@0] vout: get hdmimode: 1080p60hz
55[ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
56[ 0.000000@0] vout: get cvbsmode: 576cvbs
57[ 0.000000@0] vpp_axis_reverse: bootargs is 0
58[ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
59[ 0.000000@0] phlock_phase_config: bootargs is 0.
60[ 0.000000@0] jtag: jtag select disable
61[ 0.000000@0] init_wol_state, enable_wol=1
62[ 0.000000@0] vout: get hdmimode: 1080p60hz
63[ 0.000000@0] fb: osd0
64[ 0.000000@0] fb: loaded
65[ 0.000000@0] fb: 0x3d800000
66[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
67[ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
68[ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
69[ 0.000000@0] Memory: 1487628K/2097152K available (10620K kernel code, 1574K rwdata, 8488K rodata, 4224K init, 1382K bss, 68852K reserved, 540672K cma-reserved)
70[ 0.000000@0] Virtual kernel memory layout:
71[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
72[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
73[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009ae0000 ( 10624 KB)
74[ 0.000000@0] .rodata : 0xffffff8009ae0000 - 0xffffff800a330000 ( 8512 KB)
75[ 0.000000@0] .init : 0xffffff800a330000 - 0xffffff800a750000 ( 4224 KB)
76[ 0.000000@0] .data : 0xffffff800a750000 - 0xffffff800a8d9a00 ( 1575 KB)
77[ 0.000000@0] .bss : 0xffffff800a8d9a00 - 0xffffff800aa3343c ( 1383 KB)
78[ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
79[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
80[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
81[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB actual)
82[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
83[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
84[ 0.000000@0] Preemptible hierarchical RCU implementation.
85[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
86[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
87[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
88[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
89[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
90[ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
91[ 0.000000@0] Meson chip version = RevC (2B:C - 10:0)
92[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
93[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
94[ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
95[ 0.000000@0] meson_g12a_media_init: register meson media clk
96[ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
97[ 0.000000@0] meson_g12a_misc_init: done.
98[ 0.000000@0] g12a_clkc_init initialization complete
99[ 0.000000@0] sm1 clk probe ok
100[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
101[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
102[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
103[ 0.000036@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
104[ 0.000592@0] Console: colour dummy device 80x25
105[ 0.000618@0] console [tty0] enabled
106[ 0.000632@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
107[ 0.000643@0] pid_max: default: 32768 minimum: 301
108[ 0.000736@0] Security Framework initialized
109[ 0.000744@0] SELinux: Initializing.
110[ 0.000784@0] SELinux: Starting in permissive mode
111[ 0.000822@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
112[ 0.000828@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
113[ 0.001478@0] ftrace: allocating 35740 entries in 140 pages
114[ 0.075137@0] sched-energy: CPU device node has no sched-energy-costs
115[ 0.075146@0] CPU0: update cpu_capacity 1024
116[ 0.075157@0] ASID allocator initialised with 65536 entries
117[ 0.118039@0] secmon: can't fine clear_range
118[ 0.118172@0] EFI services will not be available.
119[ 0.163575@1] Detected VIPT I-cache on CPU1
120[ 0.163630@1] CPU1: update cpu_capacity 1024
121[ 0.163632@1] CPU1: Booted secondary processor [411fd050]
122[ 0.195639@2] Detected VIPT I-cache on CPU2
123[ 0.195676@2] CPU2: update cpu_capacity 1024
124[ 0.195678@2] CPU2: Booted secondary processor [411fd050]
125[ 0.227728@3] Detected VIPT I-cache on CPU3
126[ 0.227763@3] CPU3: update cpu_capacity 1024
127[ 0.227765@3] CPU3: Booted secondary processor [411fd050]
128[ 0.227855@0] Brought up 4 CPUs
129[ 0.227861@0] SMP: Total of 4 processors activated.
130[ 0.227865@0] CPU features: detected feature: Privileged Access Never
131[ 0.227868@0] CPU features: detected feature: User Access Override
132[ 0.227870@0] CPU features: detected feature: Virtualization Host Extensions
133[ 0.227872@0] CPU features: detected feature: 32-bit EL0 Support
134[ 0.228024@0] CPU: All CPU(s) started at EL2
135[ 0.228042@0] alternatives: patching kernel code
136[ 0.229782@0] devtmpfs: initialized
137[ 0.249026@0] DMI not present or invalid.
138[ 0.249340@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
139[ 0.249352@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
140[ 0.249540@0] pinctrl core: initialized pinctrl subsystem
141[ 0.250451@0] NET: Registered protocol family 16
142[ 0.252280@2] schedtune: init normalization constants...
143[ 0.252283@2] schedtune: no energy model data
144[ 0.252285@2] schedtune: disabled!
145[ 0.267778@2] cpuidle: using governor menu
146[ 0.267865@2] register canvas platform driver
147[ 0.267903@2] register rdma platform driver
148[ 0.267936@2] aml_vdac_init: module init
149[ 0.269748@2] vdso: 2 pages (1 code @ ffffff8009ae7000, 1 data @ ffffff800a755000)
150[ 0.269762@2] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
151[ 0.270183@2] DMA: preallocated 256 KiB pool for atomic allocations
152[ 0.270348@2] clkmsr: clkmsr: driver init
153[ 0.270351@2] codec_mm_module_init
154[ 0.270401@2] media_configs_system_init
155[ 0.270905@2] pstore: using zlib compression
156[ 0.270941@2] console [pstore-1] enabled
157[ 0.270944@2] pstore: Registered ramoops as persistent store backend
158[ 0.270948@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0
159[ 0.272546@2] aml_iomap: amlogic iomap probe done
160[ 0.272972@2] vpu: driver version: v20190314(10-sm1)
161[ 0.272979@2] vpu: load vpu_clk: 666666667Hz(7)
162[ 0.273200@2] vpu: clktree_init
163[ 0.273254@2] vpu: vpu_probe OK
164[ 0.276727@2] clkmsr: msr_clk_reg0=ffffff80081bc004,msr_clk_reg2=ffffff80081be00c
165[ 0.276738@2] clkmsr: msr_ring_reg0=ffffff80081c05fc
166[ 0.280882@2] aml_vdac_probe:probe start.cpu_id:8,name:meson-sm1-vdac
167[ 0.281049@2] aml_vdac_probe: ok
168[ 0.281175@2] canvas_probe reg=00000000ff638000,size=2000
169[ 0.281192@2] canvas maped reg_base =ffffff80081c2000
170[ 0.286859@2] rdma_probe,cpu_type:1, ver:0, len:8
171[ 0.287031@2] rdma_register, rdma_table_addr ffffff80081e5000 rdma_table_addr_phy 74840000 reg_buf ffffffc05b970000
172[ 0.287037@2] rdma_register success, handle 1 table_size 32768
173[ 0.287040@2] set_rdma_handle video rdma handle = 1.
174[ 0.288072@2] aml_snd_reg_map[0], reg:ff661000, size:400
175[ 0.288085@2] aml_snd_reg_map[1], reg:ff660000, size:1000
176[ 0.288096@2] aml_snd_reg_map[2], reg:ff661400, size:400
177[ 0.288106@2] aml_snd_reg_map[3], reg:ff662000, size:1000
178[ 0.288116@2] aml_snd_reg_map[4], reg:ffd01000, size:1000
179[ 0.288126@2] aml_snd_reg_map[5], reg:ff661800, size:400
180[ 0.288136@2] aml_snd_reg_map[6], reg:ff663800, size:30
181[ 0.288146@2] aml_snd_reg_map[7], reg:ff663c00, size:20
182[ 0.288156@2] aml_snd_reg_map[8], reg:ff663e00, size:10
183[ 0.288159@2] amlogic auge_snd_iomap probe done
184[ 0.289562@2] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout
185[ 0.289574@2] cvbs_out: clk path:0
186[ 0.289577@2] cvbs_out: error: failed to get vdac_config
187[ 0.289773@2] vout: vout1: register server: cvbs_vout_server
188[ 0.289776@2] cvbs_out: register cvbs module server ok
189[ 0.289781@2] vout: vout2: register server: cvbs_vout2_server
190[ 0.289784@2] cvbs_out: register cvbs module vout2 server ok
191[ 0.289791@2] cvbs_out: chrdev devno 264241152 for disp
192[ 0.289991@2] cvbs_out: create cdev cvbs
193[ 0.289995@2] cvbs_out: cvbsout_probe OK
194[ 0.290398@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
195[ 0.290481@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
196[ 0.290484@2] codec_mm_probe ok
197[ 0.445760@2] SCSI subsystem initialized
198[ 0.446005@2] usbcore: registered new interface driver usbfs
199[ 0.446054@2] usbcore: registered new interface driver hub
200[ 0.446147@2] usbcore: registered new device driver usb
201[ 0.446280@2] pps_core: LinuxPPS API ver. 1 registered
202[ 0.446284@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
203[ 0.446306@2] PTP clock support registered
204[ 0.446463@2] dmi: Firmware registration failed.
205[ 0.446840@2] secmon: reserve_mem_size:0x300000
206[ 0.446931@2] secmon secmon: assigned reserved memory node linux,secmon
207[ 0.447143@2] secmon: get page:ffffffbf00140000, 5000
208[ 0.447150@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
209[ 0.447152@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
210[ 0.448080@2] hdmitx: system: amhdmitx_probe start
211[ 0.448084@2] hdmitx: system: Ver: 20190624
212[ 0.448112@2] hdmitx: system: hdmitx_device.chip_type : 12
213[ 0.448155@2] hdmitx: system: not find match pwr-ctl
214[ 0.448209@2] hdmitx: system: not find drm_amhdmitx
215[ 0.448229@2] hdmitx: system: hpd irq = 32
216[ 0.448343@2] hdmitx: system: hdcp22_tx_skp failed to probe
217[ 0.448346@2] hdmitx: system: hdcp22_tx_esm failed to probe
218[ 0.448819@2] vout: vout1: register server: hdmitx_vout_server
219[ 0.448824@2] vout: vout2: register server: hdmitx_vout2_server
220[ 0.449364@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
221[ 0.449380@2] hdmitx: hdmitx20: Mapped PHY: 0xff634400
222[ 0.449389@2] hdmitx: hdmitx20: Mapped PHY: 0xff900000
223[ 0.449400@2] hdmitx: hdmitx20: Mapped PHY: 0xff800000
224[ 0.449407@2] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
225[ 0.449412@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
226[ 0.449417@2] hdmitx: hdmitx20: Mapped PHY: 0xff608000
227[ 0.449423@2] hdmitx: hdmitx20: Mapped PHY: 0xff600000
228[ 0.449427@2] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
229[ 0.449437@2] hdmitx: hw: alread display in uboot 0x10
230[ 0.449462@2] hdmitx: hw: avmute set to 1
231[ 0.449541@2] hdmitx: system: amhdmitx_probe end
232[ 0.449929@0] hdmitx: system: irq 80000002 0
233[ 0.450154@2] lcd: driver version: 20181012(8-sm1)
234[ 0.450271@2] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
235[ 0.450543@2] lcd: lcd_clktree_probe
236[ 0.450547@2] lcd: status: 0
237[ 0.450554@2] vout: vout1: register server: lcd_vout_server
238[ 0.450560@2] vout: vout2: register server: lcd_vout2_server
239[ 0.450565@2] lcd: lcd_get_config from dts
240[ 0.450574@2] lcd: no range_setting
241[ 0.450617@2] lcd: P070ACB_FT, mipi, 8bit, 600x1024
242[ 0.450631@2] lcd: pixel_clk = 49.434MHz, bit_rate = 395.472MHz
243[ 0.450879@2] lcd: lcd_fops_create OK
244[ 0.450914@2] lcd: request lcd_vsync_irq successful
245[ 0.450936@2] lcd: request lcd_vsync2_irq successful
246[ 0.450939@2] lcd: lcd_probe ok
247[ 0.451314@2] vout: create vout attribute OK
248[ 0.451443@2] vout: vout_fops_create OK
249[ 0.451447@2] vout: vout1: register server: nulldisp_vout_server
250[ 0.451540@2] vout: tvout monitor interval:500(ms), timeout cnt:20
251[ 0.451561@2] hdmitx: hdmitx_set_current_vmode[3772]
252[ 0.451564@2] hdmitx: system: recalc before 1080p60hz 60 1
253[ 0.451569@2] hdmitx: system: recalc after 1080p60hz 2997 50
254[ 0.451571@2] hdmitx: alread display in uboot
255[ 0.451575@2] vout: init mode 1080p60hz set ok
256[ 0.451578@2] vout: aml_tvout_mode_monitor
257[ 0.451587@2] vout: aml_vout_probe OK
258[ 0.451891@2] chip type:0x2b
259[ 0.452238@2] NO valid ramdump args:0 0
260[ 0.456710@1] Advanced Linux Sound Architecture Driver Initialized.
261[ 0.458200@1] NetLabel: Initializing
262[ 0.458209@1] NetLabel: domain hash size = 128
263[ 0.458211@1] NetLabel: protocols = UNLABELED CIPSOv4
264[ 0.458275@1] NetLabel: unlabeled traffic allowed by default
265[ 0.461356@1] clocksource: Switched to clocksource arch_sys_counter
266[ 0.519180@1] VFS: Disk quotas dquot_6.6.0
267[ 0.519338@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
268[ 0.532159@3] jtag: module init
269[ 0.532682@3] jtag: ao gpios not specified
270[ 0.532746@3] jtag: probe of jtag failed with error -22
271[ 0.533398@3] NET: Registered protocol family 2
272[ 0.534232@3] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
273[ 0.534329@3] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
274[ 0.534749@3] TCP: Hash tables configured (established 16384 bind 16384)
275[ 0.534868@3] UDP hash table entries: 1024 (order: 3, 32768 bytes)
276[ 0.534900@3] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
277[ 0.535174@3] NET: Registered protocol family 1
278[ 0.538010@3] wifi: power_on_pin_OD = 0;
279[ 0.538034@3] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
280[ 0.538268@3] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
281[ 0.538288@3] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
282[ 0.538296@3] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
283[ 0.538300@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
284[ 0.538627@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
285[ 0.538634@3] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
286[ 0.538639@3] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
287[ 0.538643@3] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
288[ 0.538647@3] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
289[ 0.539069@1] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
290[ 0.539251@1] aml_wifi wifi: [wifi_setup_dt] irq num is:(64)
291[ 0.539257@1] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
292[ 0.539280@1] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
293[ 0.539545@1] Unpacking initramfs...
294[ 0.561920@1] Freeing initrd memory: 4708K
295[ 0.564677@1] hw perfevents: clusterb_enabled = 0
296[ 0.564687@1] hw perfevents: cpumasks 0xf, 0x0
297[ 0.564744@1] hw perfevents: cluster A irq = 10
298[ 0.564881@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
299[ 0.569009@3] audit: initializing netlink subsys (disabled)
300[ 0.569133@3] audit: type=2000 audit(0.508:1): initialized
301[ 0.570285@0] workingset: timestamp_bits=46 max_order=19 bucket_order=0
302[ 0.579751@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
303[ 0.579992@0] Registering sdcardfs 0.1
304[ 0.581042@3] SELinux: Registering netfilter hooks
305[ 0.586176@0] NET: Registered protocol family 38
306[ 0.586205@0] Key type asymmetric registered
307[ 0.586211@0] Asymmetric key parser 'x509' registered
308[ 0.586588@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
309[ 0.586598@0] io scheduler noop registered (default)
310[ 0.586602@0] io scheduler deadline registered
311[ 0.586819@0] io scheduler cfq registered
312[ 0.591106@1] random: fast init done
313[ 0.591153@1] random: crng init done
314[ 0.591302@0] [drm] Initialized
315[ 0.591447@0] Unable to detect cache hierarchy for CPU 0
316[ 0.598523@0] loop: module loaded
317[ 0.599205@0] mtdoops: mtd device (mtddev=name/number) must be supplied
318[ 0.600194@0] libphy: Fixed MDIO Bus: probed
319[ 0.601148@0] REG0:Addr = ffffff8008411540
320[ 0.601166@0] ee eth reset:Addr = ffffff8008413008
321[ 0.601175@0] MAC wol not set
322[ 0.601181@0] wzh pll 9c0040a 927e0000 ac5f49e5
323[ 0.601393@0] wzh analog 20200000 c000 23
324[ 0.612209@1] meson6-dwmac ff3f0000.ethernet: no reset control found
325[ 0.612225@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
326[ 0.612229@1] Ring mode enabled
327[ 0.612234@1] DMA HW capability register supported
328[ 0.612238@1] Normal descriptors
329[ 0.612241@1] RX Checksum Offload Engine supported
330[ 0.612243@1] COE Type 2
331[ 0.612245@1] TX Checksum insertion supported
332[ 0.612246@1] Wake-Up On Lan supported
333[ 0.612330@1] Enable RX Mitigation via HW Watchdog Timer
334[ 0.616205@1] libphy: stmmac: probed
335[ 0.616217@1] eth%d: PHY ID 01803301 at 8 IRQ POLL (stmmac-0:08) active
336[ 0.619570@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
337[ 0.619579@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
338[ 0.620313@1] usbcore: registered new interface driver cdc_acm
339[ 0.620316@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
340[ 0.620392@1] usbcore: registered new interface driver usb-storage
341[ 0.620550@1] usbcore: registered new interface driver usbserial
342[ 0.620624@1] usbcore: registered new interface driver usbserial_generic
343[ 0.620682@1] usbserial: USB Serial support registered for generic
344[ 0.621290@0] mousedev: PS/2 mouse device common for all mice
345[ 0.621963@0] i2c /dev entries driver
346[ 0.624828@0] ledtrig-cpu: registered to indicate activity on CPUs
347[ 0.625404@0] hidraw: raw HID events driver (C) Jiri Kosina
348[ 0.626044@0] usbcore: registered new interface driver usbhid
349[ 0.626048@0] usbhid: USB HID core driver
350[ 0.627572@0] value of voltage_tolerance 0
351[ 0.627577@0] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
352[ 0.627621@0] value of gp1_clk_target 0
353[ 0.629189@0] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
354[ 0.631227@0] ff803000.serial: clock gate not found
355[ 0.631374@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008417000
356[ 0.631442@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 17, base_baud = 1500000) is a meson_uart
357[ 0.631471@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
358[ 0.669515@0] console [ttyS0] enabled
359[ 0.670797@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008419000
360[ 0.670880@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 31, base_baud = 1500000) is a meson_uart
361[ 0.672762@3] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff800841b000
362[ 0.673598@3] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff8008439080
363[ 0.676079@3] aml_dma ff63e000.aml_dma: Aml dma
364[ 0.679335@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
365[ 0.680911@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
366[ 0.681492@3] gpio-keypad ff800000.gpio_keypad: power key(116) registed.
367[ 0.681687@3] input: gpio_keypad as /devices/platform/ff800000.gpio_keypad/input/input0
368[ 0.682085@0] meson-remote: Driver init
369[ 0.682647@0] meson-remote: remote_probe
370[ 0.682666@0] meson-remote ff808040.meson-remote: protocol = 0x1
371[ 0.682670@0] meson-remote ff808040.meson-remote: led_blink = 1
372[ 0.682675@0] meson-remote ff808040.meson-remote: led_blink_frq = 100
373[ 0.682745@0] meson-remote ff808040.meson-remote: platform_data irq =63
374[ 0.682753@0] meson-remote ff808040.meson-remote: get_custom_tables:don't find match custom
375[ 0.685717@0] meson-remote ff808040.meson-remote: default protocol = 0x1 and id = 0
376[ 0.685723@0] meson-remote ff808040.meson-remote: reg=0x0, val=0x1f40190
377[ 0.685725@0] meson-remote ff808040.meson-remote: reg=0x4, val=0x12c00c8
378[ 0.685728@0] meson-remote ff808040.meson-remote: reg=0x8, val=0x960050
379[ 0.685731@0] meson-remote ff808040.meson-remote: reg=0xc, val=0x480028
380[ 0.685733@0] meson-remote ff808040.meson-remote: reg=0x10, val=0x70fa0013
381[ 0.685736@0] meson-remote ff808040.meson-remote: reg=0x18, val=0x8616800
382[ 0.685739@0] meson-remote ff808040.meson-remote: reg=0x1c, val=0x9f00
383[ 0.685742@0] meson-remote ff808040.meson-remote: reg=0x20, val=0x0
384[ 0.685745@0] meson-remote ff808040.meson-remote: reg=0x24, val=0x0
385[ 0.685747@0] meson-remote ff808040.meson-remote: reg=0x28, val=0x0
386[ 0.686356@3] input: aml_keypad as /devices/platform/ff808040.meson-remote/input/input1
387[ 0.686778@3] meson-remote: IR XMP protocol handler initialized
388[ 0.689974@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
389[ 0.690832@1] ge2d: ge2d_init_module
390[ 0.691217@1] ge2d: ge2d_dev major:236
391[ 0.691631@3] ge2d: clock source clk_ge2d_gate ffffffc05b7b1100
392[ 0.691676@3] ge2d: clock clk_ge2d source ffffffc05b7b1380
393[ 0.691697@3] ge2d: clock source clk_vapb_0 ffffffc05b7b1680
394[ 0.691704@3] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
395[ 0.691929@3] ge2d: ge2d clock is 499 MHZ
396[ 0.691950@3] ge2d: find address resource
397[ 0.691982@3] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff80084b0000
398[ 0.691986@3] ge2d: reserved mem init failed
399[ 0.691990@3] ge2d: ge2d: pdev=ffffffc05b926800, irq=20, clk=ffffffc05b7b1100
400[ 0.692066@3] ge2d: ge2d start monitor
401[ 0.692187@3] ge2d: ge2d workqueue monitor start
402[ 0.692758@1] [tsync_pcr_init]init success.
403[ 0.693185@1] amvideom vsync irq: 36
404[ 0.694154@1] create_ge2d_work_queue video task ok
405[ 0.694860@1] amvideocap_probe,amvideocap
406[ 0.694933@1] use cma buf.
407[ 0.696196@3] fb: osd_init_module
408[ 0.696753@3] fb: viu vsync irq: 36
409[ 0.696764@3] fb: viu2 vsync irq: 44
410[ 0.696968@3] 0x000000db:Y=db,U=0,V=0
411[ 0.696971@3] 0x000000dc:Y=dc,U=0,V=0
412[ 0.696973@3] 0x000000dd:Y=dd,U=0,V=0
413[ 0.696974@3] 0x000000de:Y=de,U=0,V=0
414[ 0.696976@3] 0x000000df:Y=df,U=0,V=0
415[ 0.696977@3] 0x000000e0:Y=e0,U=0,V=0
416[ 0.697746@3] fb: osd_rdma_init: rdma_table p=0x74848000,op=0x74848000 , v=0xffffff80084ac000
417[ 0.697921@3] rdma_register, rdma_table_addr ffffff80084ae000 rdma_table_addr_phy 74849000 reg_buf ffffffc05b405000
418[ 0.697926@3] rdma_register success, handle 2 table_size 4096
419[ 0.697929@3] fb: osd_rdma_init:osd rdma handle = 2.
420[ 0.697957@3] fb: mem_size: 0x800000
421[ 0.697958@3] fb: mem_size: 0x4b80000
422[ 0.697959@3] fb: mem_size: 0x100000
423[ 0.697960@3] fb: mem_size: 0x100000
424[ 0.697961@3] fb: mem_size: 0x800000
425[ 0.698184@3] meson-fb fb: assigned reserved memory node linux,meson-fb
426[ 0.698189@3] fb: reserved memory base:0x0000000077800000, size:800000
427[ 0.856610@3] fb: fb def : 1920 1080 1920 2160 32
428[ 0.856621@3] fb: init fbdev bpp is:32
429[ 0.858635@0] fb: osd[0] enable: 1 (swapper/0)
430[ 0.860181@2] clear:79000000, free:79000000, tick:393696 us
431[ 0.875290@0] fb: set osd0 reverse as NONE
432[ 0.891317@0] fb: osd probe OK
433[ 0.891558@0] hdmitx: hdcp: hdmitx_hdcp_init
434[ 0.892081@0] vout: vout2: create vout2 attribute OK
435[ 0.892187@0] vout: vout2: vout2_fops_create OK
436[ 0.892385@0] vout: vout2: clktree_init
437[ 0.892389@0] vout: vout2: register server: nulldisp_vout2_server
438[ 0.892484@0] vout: vout2: init mode null set ok
439[ 0.892486@0] vout: vout2: aml_vout2_probe OK
440[ 0.892607@0] DI: di_module_init ok.
441[ 0.892612@0] DI: di_module_init: major 509
442[ 0.892968@0] deinterlace deinterlace: assigned reserved memory node linux,di_cma
443[ 0.892975@0] di:flag_cma=1
444[ 0.892978@0] DI: CMA size 0x2800000.
445[ 0.892995@0] pre_irq:52
446[ 0.893003@0] post_irq:53
447[ 0.893005@0] DI: di_probe allocate rdma channel 0.
448[ 0.893010@0] di_get_vpu_clkb: get clk vpu error.
449[ 0.893047@0] DI: vpu clkb <334000000, 667000000>
450[ 0.893086@0] get clkb rate:333333328
451[ 0.893092@0] DI:enable vpu clkb.
452[ 0.893100@0] 0x000000e1:Y=e1,U=0,V=0
453[ 0.893103@0] 0x000000e2:Y=e2,U=0,V=0
454[ 0.893105@0] 0x000000e3:Y=e3,U=0,V=0
455[ 0.893108@0] 0x000000f0:Y=f0,U=0,V=0
456[ 0.893109@0] 0x000000f1:Y=f1,U=0,V=0
457[ 0.893112@0] 0x000000f2:Y=f2,U=0,V=0
458[ 0.893114@0] 0x000000f3:Y=f3,U=0,V=0
459[ 0.893115@0] 0x000000f4:Y=f4,U=0,V=0
460[ 0.893117@0] 0x000000f5:Y=f5,U=0,V=0
461[ 0.893118@0] 0x000000f6:Y=f6,U=0,V=0
462[ 0.893122@0] 0x000000f7:Y=f7,U=0,V=0
463[ 0.893123@0] 0x000000f8:Y=f8,U=0,V=0
464[ 0.893125@0] 0x000000f9:Y=f9,U=0,V=0
465[ 0.893126@0] 0x000000fa:Y=fa,U=0,V=0
466[ 0.893127@0] 0x000000fb:Y=fb,U=0,V=0
467[ 0.893128@0] 0x000000fc:Y=fc,U=0,V=0
468[ 0.893132@0] 0x000000fd:Y=fd,U=0,V=0
469[ 0.893134@0] 0x000000fe:Y=fe,U=0,V=0
470[ 0.893135@0] 0x000000ff:Y=ff,U=0,V=0
471[ 0.893136@0] 0x0000003a:Y=3a,U=0,V=0
472[ 0.893137@0] 0x0000003b:Y=3b,U=0,V=0
473[ 0.893139@0] 0x0000003c:Y=3c,U=0,V=0
474[ 0.893142@0] 0x0000003d:Y=3d,U=0,V=0
475[ 0.893143@0] 0x0000003e:Y=3e,U=0,V=0
476[ 0.893145@0] 0x0000003f:Y=3f,U=0,V=0
477[ 0.893147@0] DI: support multi decoding 61~62~63.
478[ 0.893283@0] DI: di_probe:Di use HRTIMER
479[ 0.893400@0] di_probe:ok
480[ 0.893496@0] vdin_drv_init: major 508
481[ 0.893719@0] vdin_drv_init: vdin driver init done
482[ 0.893721@0] [viuin..]viuin_init_module viuin module init
483[ 0.893942@0] [viuin..]viuin_probe probe ok.
484[ 0.894449@0] [RX]-hdmirx: hdmirx_init.
485[ 0.894452@0] ESM HLD: Initializing...
486[ 0.894561@0] tvin_afe: tvafe_drv_init: major 506
487[ 0.894894@0] tvin_afe: tvafe_drv_init.
488[ 0.895050@0] tvafe_vbi: vbi: vbi_init.
489[ 0.895248@0] PPMGRDRV: warn: ppmgr module init func called
490[ 0.895354@0] PPMGRDRV: info: ppmgr_driver_probe called
491[ 0.895423@0] Reserved memory: failed to init DMA memory pool at 0x0000000075000000, size 0 MiB
492[ 0.900787@0] PPMGRDRV: info: ppmgr_dev major:504
493[ 0.901140@0] picdec: picdec_driver_probe called.
494[ 0.901357@0] picdec: probe of picdec failed with error -22
495[ 0.901531@0] videosync_create_instance dev_s ffffffc05adca400,dev_s->dev ffffffc05af1de80
496[ 0.901533@0] videosync_create_instance reg videosync.0
497[ 0.901662@0] aml_vecm_init:module init
498[ 0.901685@1] videosync_thread started
499[ 0.901827@0]
500[ 0.901827@0] VECM probe start
501[ 0.902019@0] vlock_status_init vlock_en:0
502[ 0.902043@0] Can't find wb_sel.
503[ 0.902044@0] hdr:Can't find cfg_en_osd_100.
504[ 0.902048@0] amlogic, vecm
505[ 0.902050@0] vlock dt support: 1
506[ 0.902052@0] vlock dt new_fsm: 0
507[ 0.902053@0] vlock dt hwver: 0
508[ 0.902055@0] vlock dt phlock_en: 0
509[ 0.902056@0] Can't find vlock_en.
510[ 0.902058@0] Can't find vlock_mode.
511[ 0.902059@0] Can't find vlock_pll_m_limit.
512[ 0.902060@0] Can't find vlock_line_limit.
513[ 0.902068@0] param_config vlock_en:0
514[ 0.902088@0] aml_vecm_probe: ok
515[ 0.902138@0] amdolby_vision_init:module init
516[ 0.902435@0]
517[ 0.902435@0] amdolby_vision probe start & ver: 20181220
518[ 0.902440@0]
519[ 0.902440@0] cpu_id=2 tvmode=0
520[ 0.902546@0] dolby_vision_init_receiver(dvel)
521[ 0.902550@0] dolby_vision_init_receiver: dvel
522[ 0.902776@0] amdolby_vision_probe: ok
523[ 0.903383@0] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
524[ 0.904719@0] meson-mmc: >>>>>>>>hostbase ffffff80084e0000, dmode
525[ 0.907269@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
526[ 0.907272@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
527[ 0.945365@0] meson-mmc: meson_mmc_probe() : success!
528[ 0.953539@0] hdmitx: system: plugin
529[ 1.085587@0] hdmitx: edid: EDID Parser:
530[ 1.085591@0] hdmitx: hdmitx: reach vesa idx MAX
531[ 1.085595@0] hdmitx: edid: set default vic
532[ 1.085600@0] hdmitx: edid: check sum valid
533[ 1.085601@0] hdmitx: edid: check sum valid
534[ 1.085607@0] hdmitx: edid: blk0 raw data
535[ 1.085629@0] hdmitx: edid:
536[ 1.085629@0] 00ffffffffffff004c2d57020000000013100103801009782ade95a3544c9926
537[ 1.085629@0] 0f505420000001010101010101010101010101010101011d007251d01e206e28
538[ 1.085629@0] 5500a05a0000001e011d8018711c1620582c2500a05a0000009e000000fc0053
539[ 1.085629@0] 414d53554e47204c43440a20000000fd00313d0f2e08000a202020202020011c
540[ 1.085629@0]
541[ 1.085629@0]
542[ 1.085631@0] hdmitx: edid: blk1 raw data
543[ 1.085650@0] hdmitx: edid:
544[ 1.085650@0] 020104008c0ad08a20e02d10103e9600a05a000000188c0aa01451f01600267c
545[ 1.085650@0] 4300a05a00000098011d00bc52d01e20b8285540a05a0000001e011d80d0721c
546[ 1.085650@0] 1620102c2580a05a0000009e8c0ad090204031200c405500a05a000000188c0a
547[ 1.085650@0] a02051201810187e2300a05a00000098000000000000000000000000000000b8
548[ 1.085650@0]
549[ 1.085650@0]
550[ 1.085654@0] hdmitx: system: update physcial size: 160 90
551[ 1.085674@0] hdmitx: system: get current mode: 1080p60hz
552[ 1.085677@0] hdmitx: system: update rx hdr info 0
553[ 1.085678@0] hdmitx: system: update physcial size: 160 90
554[ 1.085692@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
555[ 1.085708@0] hdmitx: system: change to DVI mode
556[ 1.085711@0] hdmitx: hw: set audio
557[ 1.085716@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0, hdev->aud_output_ch = 0
558[ 1.085730@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148352
559[ 1.085732@0] hdmitx: hw: aud_n_para = 5824
560[ 1.085741@0] hdmitx: hw: set channel status
561[ 1.087449@0] meson-mmc: >>>>>>>>hostbase ffffff80084e9000, dmode
562[ 1.088139@1] meson-mmc: gpio_cd = 1ca
563[ 1.124891@0] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
564[ 1.124895@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
565[ 1.124898@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
566[ 1.124902@0] meson-mmc: Data 1 aligned delay is 0
567[ 1.124906@0] meson-mmc: emmc: clk 199999997 tuning start
568[ 1.125382@1] meson-mmc: meson_mmc_probe() : success!
569[ 1.126205@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
570[ 1.129200@0] meson-mmc: emmc: rx_tuning_result[1] = 40
571[ 1.130465@0] meson-mmc: emmc: rx_tuning_result[2] = 40
572[ 1.130546@1] meson-mmc: >>>>>>>>hostbase ffffff80084f2000, dmode
573[ 1.134764@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
574[ 1.134779@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
575[ 1.135470@0] meson-mmc: emmc: rx_tuning_result[3] = 40
576[ 1.136707@0] meson-mmc: emmc: rx_tuning_result[4] = 40
577[ 1.136713@0] meson-mmc: emmc: best_win_start =1, best_win_size =4
578[ 1.136715@0] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
579[ 1.136835@0] emmc: new HS200 MMC card at address 0001
580[ 1.136840@0] emmc: clock 199999997, 8-bit-bus-width
581[ 1.136840@0]
582[ 1.137227@0] mmcblk0: emmc:0001 AWPD3R 14.6 GiB
583[ 1.137407@0] mmcblk0boot0: emmc:0001 AWPD3R partition 1 4.00 MiB
584[ 1.137549@0] mmcblk0boot1: emmc:0001 AWPD3R partition 2 4.00 MiB
585[ 1.137684@0] mmcblk0rpmb: emmc:0001 AWPD3R partition 3 4.00 MiB
586[ 1.138677@0] meson-mmc: Enter aml_emmc_partition_ops
587[ 1.139168@0] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
588[ 1.139171@0] meson-mmc: add_emmc_partition
589[ 1.139313@0] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
590[ 1.139410@0] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
591[ 1.139511@0] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
592[ 1.139604@0] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
593[ 1.139699@0] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
594[ 1.139793@0] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
595[ 1.139885@0] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
596[ 1.139975@0] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000
597[ 1.140077@0] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
598[ 1.140166@0] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
599[ 1.140259@0] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
600[ 1.140360@0] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
601[ 1.140457@0] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000
602[ 1.140549@0] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000
603[ 1.140640@0] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000
604[ 1.140733@0] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000046000000
605[ 1.140824@0] meson-mmc: [mmcblk0p17] odm offset 0x0000a3e00000, size 0x000008000000
606[ 1.140913@0] meson-mmc: [mmcblk0p18] system offset 0x0000ac600000, size 0x000050000000
607[ 1.141011@0] meson-mmc: [mmcblk0p19] product offset 0x0000fce00000, size 0x000008000000
608[ 1.141099@0] meson-mmc: [mmcblk0p20] data offset 0x000105600000, size 0x00029e800000
609[ 1.141113@0] card key: card_blk_probe.
610[ 1.141117@0] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
611[ 1.141120@0] emmc key: emmc_key_init:205 ok.
612[ 1.141123@0] meson-mmc: amlmmc_dtb_init: register dtb chardev
613[ 1.143409@0] meson-mmc: calc f9ba9a1c, store f9ba9a1c
614[ 1.145536@0] meson-mmc: calc f9ba9a1c, store f9ba9a1c
615[ 1.145538@0] meson-mmc: total valid 2
616[ 1.145731@0] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
617[ 1.145761@0] meson-mmc: Exit aml_emmc_partition_ops OK.
618[ 1.173377@1] meson-mmc: meson_mmc_probe() : success!
619[ 1.173618@1] amlogic mtd driver init
620[ 1.174239@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
621[ 1.174932@1] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
622[ 1.174932@1]
623[ 1.180570@1] cectx ff80023c.aocec: compatible:amlogic, aocec-sm1
624[ 1.185882@1] cectx ff80023c.aocec: cecb_ver:0x2
625[ 1.190400@1] cectx ff80023c.aocec: line_reg:0x1
626[ 1.195057@1] cectx ff80023c.aocec: line_bit:0x3
627[ 1.199617@1] cectx ff80023c.aocec: ee_to_ao:0x1
628[ 1.204306@1] input: cec_input as /devices/virtual/input/input2
629[ 1.204425@1] cectx ff80023c.aocec: not find 'port_num'
630[ 1.209385@1] cectx ff80023c.aocec: using cec:0
631[ 1.213902@1] cectx ff80023c.aocec: no hdmirx regs
632[ 1.218651@1] cectx ff80023c.aocec: no hhi regs
633[ 1.223161@1] cectx ff80023c.aocec: not find 'output'
634[ 1.231315@1] cectx ff80023c.aocec: irq cnt:2
635[ 1.232719@1] cectx ff80023c.aocec: wakeup_reason:0x0
636[ 1.237619@1] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
637[ 1.243093@1] cectx ff80023c.aocec: aml_cec_probe success end
638[ 1.249142@1] unifykey: storage in base: 0xffffffc005000000
639[ 1.249144@1] unifykey: storage out base: 0xffffffc005040000
640[ 1.249145@1] unifykey: storage block base: 0xffffffc005080000
641[ 1.249147@1] unifykey: probe done!
642[ 1.249551@1] unifykey: no efuse-version set, use default value: -1
643[ 1.249554@1] unifykey: key unify config unifykey-num is 17
644[ 1.249601@1] unifykey: key unify fact unifykey-num is 17
645[ 1.249611@1] unifykey: unifykey_devno: 1f100000
646[ 1.249769@1] unifykey: device unifykeys created ok
647[ 1.249822@1] unifykey: aml_unifykeys_init done!
648[ 1.250004@1] meson ts init
649[ 1.250059@1] tsensor id: 0
650[ 1.250270@1] tsensor trim info: 0xfa008083!
651[ 1.250272@1] tsensor hireboot: 0xc0ff2ab0
652[ 1.250343@1] meson ts init
653[ 1.250368@1] tsensor id: 1
654[ 1.250506@1] tsensor trim info: 0xfa00805e!
655[ 1.250509@1] tsensor hireboot: 0xc0ff2aa0
656[ 1.250590@1] audio_dsp: [dsp]register dsp to char divece(257)
657[ 1.250742@1] amaudio: amaudio: driver amaudio init!
658[ 1.251011@1] amaudio: amaudio_init - amaudio: driver amaudio succuess!
659[ 1.251564@1] sysled: module init
660[ 1.251827@1] meson_wdt ffd0f0d0.watchdog: start watchdog
661[ 1.251831@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
662[ 1.252025@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
663[ 1.252575@1] amlogic rfkill init
664[ 1.252692@1] enter bt_probe of_node
665[ 1.252715@1] not get gpio_en
666[ 1.252720@1] power on valid level is high
667[ 1.252723@1] bt: power_on_pin_OD = 0;
668[ 1.252726@1] bt: power_off_flag = 1;
669[ 1.252727@1] dis power down = 0;
670[ 1.277488@1] BLASTER Driver Init
671[ 1.277812@1] irblaster: probe
672[ 1.278450@1] dmc_monitor_probe
673[ 1.278897@1] defendkey ff630218.defendkey: Reserved memory is not enough!
674[ 1.280149@1] defendkey: probe of ff630218.defendkey failed with error -22
675[ 1.280505@1] bl301_manager: driver init
676[ 1.280507@1] bl301_manager: IR remote wake-up code: 0xffffffff
677[ 1.280508@1] bl301_manager: IR remote wake-up code mask: 0xffffffff
678[ 1.280510@1] bl301_manager: IR remote wake-up code protocol: 0x0
679[ 1.280511@1] bl301_manager: enable 5V system power on suspend/power off state: 0
680[ 1.287719@1] usbcore: registered new interface driver snd-usb-audio
681[ 1.288850@1] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
682[ 1.288867@1] T9015 acodec used by auge, tdmout:1
683[ 1.289988@1] Error: Driver 'spdif-dit' is already registered, aborting...
684[ 1.291576@1] asoc debug: aml_audio_controller_probe-127
685[ 1.293199@1] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 2
686[ 1.293220@1] snd_tdm ff660000.audiobus:tdm@0: lane_mask_out = 1, lane_oe_mask_out = 0
687[ 1.293286@1] snd_tdm ff660000.audiobus:tdm@0: neither mclk_pad nor mclk2pad set
688[ 1.293417@1] aml_tdm_platform_probe(), share en = 1
689[ 1.293420@1] No channel mask node Channel_Mask
690[ 1.293636@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 8
691[ 1.293718@1] TDM id 1 samesource_sel:3
692[ 1.293730@1] snd_tdm ff660000.audiobus:tdm@1: lane_mask_out = 1, lane_oe_mask_out = 0
693[ 1.293972@1] TDM id 1 output clk enable:1
694[ 1.293994@1] aml_tdm_platform_probe(), share en = 1
695[ 1.293997@1] No channel mask node Channel_Mask
696[ 1.294003@1] TDM id 1 tuning clk enable:1
697[ 1.294147@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
698[ 1.294165@1] snd_tdm ff660000.audiobus:tdm@2: lane_mask_out = 1, lane_oe_mask_out = 0
699[ 1.294305@1] aml_tdm_platform_probe(), share en = 1
700[ 1.294307@1] No channel mask node Channel_Mask
701[ 1.294380@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
702[ 1.294391@1] TDM id 2 i2s2hdmi:1
703[ 1.294396@1] snd_tdm ff660000.audiobus:i2s2hdmi: lane_mask_out = f, lane_oe_mask_out = 0
704[ 1.294435@1] snd_tdm ff660000.audiobus:i2s2hdmi: aml_tdm_get_pins error!
705[ 1.294437@1] aml_tdm_platform_probe(), share en = 1
706[ 1.294440@1] No channel mask node Channel_Mask
707[ 1.295018@1] aml_spdif_platform_probe, spdif ID = 0
708[ 1.295323@1] SPDIF id 0 asrc_id:0 auto_asrc:0
709[ 1.295399@1] Spdif id 0 tuning clk enable:1
710[ 1.295402@1] spdifout_play_with_zerodata, spdif id:0 enable:0
711[ 1.295407@1] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
712[ 1.295413@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
713[ 1.295420@1] hdmitx: audio: aout notify format CT_PCM
714[ 1.295422@1] hdmitx: hw: set audio
715[ 1.295426@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
716[ 1.295440@1] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
717[ 1.295443@1] hdmitx: hw: aud_n_para = 5824
718[ 1.295451@1] hdmitx: hw: set channel status
719[ 1.295483@1] hdmitx: audio: Audio Type: PCM
720[ 1.295486@1] hdmitx: audio: set audio param
721[ 1.295491@1] spdif_a is set to enable
722[ 1.295508@1] aml_spdif_platform_probe, register soc platform
723[ 1.295541@1] aml_spdif_platform_probe, spdif ID = 1
724[ 1.295598@1] spdifout_play_with_zerodata, spdif id:1 enable:0
725[ 1.295603@1] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
726[ 1.295608@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
727[ 1.295617@1] spdif_b is set to enable
728[ 1.295625@1] aml_spdif_platform_probe, register soc platform
729[ 1.296336@1] default set lane_mask_in as all lanes.
730[ 1.296341@1] aml_pdm_platform_probe pdm filter mode from dts:1
731[ 1.296351@1] aml_pdm_platform_probe, register soc platform
732[ 1.296728@1] audio_ddr_mngr: 0, irqs toddr 18, frddr 22
733[ 1.296733@1] audio_ddr_mngr: 1, irqs toddr 19, frddr 23
734[ 1.296736@1] audio_ddr_mngr: 2, irqs toddr 20, frddr 24
735[ 1.296738@1] audio_ddr_mngr: 3, irqs toddr 21, frddr 25
736[ 1.297123@1] datain_src:4, datain_chnum:2, datain_chumask:3
737[ 1.297126@1] datalb_src:1, datalb_chnum:2, datalb_chmask:3
738[ 1.297128@1] datain_lane_mask:0x1, datalb_lane_mask:0x1
739[ 1.297129@1] datalb_format: 1, chmask for lanes: 0x3
740[ 1.297367@1] loopback_platform_probe, p_loopback->id:0 register soc platform
741[ 1.297739@1] audiolocker_platform_probe
742[ 1.298379@1] effect_platform_probe, line:565
743[ 1.298498@1] eqdrc_clk_set, src pll:399999993, clk:199999997
744[ 1.298503@1] effect_platform_probe module:1, lane_mask:1, ch_mask:3
745[ 1.299292@1] vad_platform_probe vad data source sel:4, level:1
746[ 1.299429@1] input: vad_keypad as /devices/platform/soc/ff660000.audiobus/ff660000.audiobus:vad/input/input3
747[ 1.299800@1] Register vad
748[ 1.300145@1] EARC ff660000.audiobus:earc: Check whether support eARC TX
749[ 1.301223@1] EARC ff660000.audiobus:earc: Check whether support eARC TX
750[ 1.307924@1] EARC ff660000.audiobus:earc: Check whether support eARC TX
751[ 1.314588@1] EARC ff660000.audiobus:earc: Check whether support eARC TX
752[ 1.321273@1] EARC ff660000.audiobus:earc: platform get irq tx_cmdc failed, Check whether support eARC TX
753[ 1.330843@1] meson-mmc: card IN
754[ 1.333992@0] EARC ff660000.audiobus:earc: platform get irq tx_dmac failed, Check whether support eARC TX
755[ 1.343586@0] earc_platform_probe, register soc platform
756[ 1.434761@1] meson-mmc: normal card in
757[ 1.553486@0] aml_dai_spdif_probe
758[ 1.553496@0] aml_dai_spdif_probe
759[ 1.553516@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
760[ 1.555632@0] snd_tdm ff660000.audiobus:i2s2hdmi: ASoC: Failed to add I2SIn CLK: -16
761[ 1.557469@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
762[ 1.557471@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
763[ 1.563404@0] aml_dai_tdm_probe, failed add snd tdm controls
764[ 1.568994@0] aml_dai_set_spdif_fmt , fmt 0x4000
765[ 1.569082@0] aml_spdif_new spdif_b, clk continuous:1
766[ 1.569085@0] spdifout_play_with_zerodata_free, spdif id:1
767[ 1.569967@0] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
768[ 1.569973@0] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
769[ 1.569975@0] lanes_out_cnt(1), lanes_in_cnt(1)
770[ 1.569978@0] lanes_lb_cnt(0)
771[ 1.569980@0] slots(2), slot_width(32)
772[ 1.569983@0] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
773[ 1.569994@0] asoc aml_dai_set_tdm_fmt, 0x4001, ffffffc07389ae18, id(1), clksel(1)
774[ 1.570003@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
775[ 1.570988@0] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok
776[ 1.570994@0] aml_dai_set_spdif_fmt , fmt 0x4000
777[ 1.571087@0] aml_spdif_new spdif_a, clk continuous:1
778[ 1.571091@0] spdifout_play_with_zerodata_free, spdif id:0
779[ 1.571976@0] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
780[ 1.571986@0] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
781[ 1.571989@0] lanes_out_cnt(4), lanes_in_cnt(0)
782[ 1.571990@0] lanes_lb_cnt(0)
783[ 1.571993@0] slots(2), slot_width(32)
784[ 1.571995@0] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
785[ 1.572004@0] asoc aml_dai_set_tdm_fmt, 0x4001, ffffffc07389bc18, id(2), clksel(2)
786[ 1.572010@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
787[ 1.573010@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok
788[ 1.577287@0] snd_card_add_kcontrols card:ffffffc05ad94818
789[ 1.577369@0] eq/drc v1 function enable
790[ 1.577374@0] no node audio_effect for eq/drc info!
791[ 1.577376@0] Failed to add audio effects v1 controls
792[ 1.577528@0] Netfilter messages via NETLINK v0.30.
793[ 1.577615@0] Initializing XFRM netlink socket
794[ 1.577630@0] NET: Registered protocol family 17
795[ 1.577655@0] Key type dns_resolver registered
796[ 1.578721@0] Registered swp emulation handler
797[ 1.578730@0] Registered cp15_barrier emulation handler
798[ 1.578736@0] Registered setend emulation handler
799[ 1.579221@0] registered taskstats version 1
800[ 1.586599@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
801[ 1.589389@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
802[ 1.589405@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
803[ 1.590088@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
804[ 1.590187@0] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000
805[ 1.590322@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
806[ 1.590328@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
807[ 1.590331@0] usb usb1: Product: xHCI Host Controller
808[ 1.590336@0] usb usb1: Manufacturer: Linux 4.9.113 xhci-hcd
809[ 1.590339@0] usb usb1: SerialNumber: xhci-hcd.0.auto
810[ 1.590804@0] hub 1-0:1.0: USB hub found
811[ 1.590828@0] hub 1-0:1.0: 2 ports detected
812[ 1.591108@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
813[ 1.591119@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
814[ 1.591188@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
815[ 1.591266@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
816[ 1.591271@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
817[ 1.591275@0] usb usb2: Product: xHCI Host Controller
818[ 1.591277@0] usb usb2: Manufacturer: Linux 4.9.113 xhci-hcd
819[ 1.591282@0] usb usb2: SerialNumber: xhci-hcd.0.auto
820[ 1.591665@0] hub 2-0:1.0: USB hub found
821[ 1.591684@0] hub 2-0:1.0: 1 port detected
822[ 1.592237@0] aml_vrtc rtc: setting system clock to 2019-12-25 13:00:20 UTC (1577278820)
823[ 1.592524@0] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc05b891000)
824[ 1.592550@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
825[ 1.592563@0] dwc_otg ff400000.dwc2_a: base=0xffffff8008b40000
826[ 1.592567@0] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0738c7a00
827[ 1.625561@1] meson-mmc: actual_clock :50000000, HHI_nand: 0x80
828[ 1.625565@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000354
829[ 1.625624@1] sd: new high speed SDHC card at address 0001
830[ 1.625627@1] sd: clock 50000000, 4-bit-bus-width
831[ 1.625627@1]
832[ 1.626012@1] mmcblk1: sd:0001 SD16G 14.5 GiB
833[ 1.627539@1] mmcblk1: p1 p2
834[ 1.692835@0] dwc_otg: Core Release: 3.30a
835[ 1.692841@0] dwc_otg: Setting default values for core params
836[ 1.692850@0] dwc_otg: curmode: 0, host_only: 0
837[ 1.692868@0] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
838[ 1.705081@0] dwc_otg: Using Buffer DMA mode
839[ 1.705085@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
840[ 1.705089@0] dwc_otg: Working on port type = SLAVE
841[ 1.705092@0] dwc_otg: Dedicated Tx FIFOs mode
842[ 1.707086@0] lcd extern: key_valid: 0
843[ 1.707090@0] lcd extern: lcd_extern_get_config from dts
844[ 1.707101@0] lcd extern: error: failed to get extern_5
845[ 1.707133@0] lcd extern: aml_lcd_extern_probe ok
846[ 1.708007@0] bl: chip type/name: (8-sm1)
847[ 1.708010@0] bl: key_valid: 0
848[ 1.708012@0] bl: aml_bl_config_load from dts
849[ 1.708018@0] bl: load: backlight_0
850[ 1.708025@0] bl error: failed to get bl_power_attr
851[ 1.708065@0] bl: bl pwm_port: PWM_F(5)
852[ 1.708069@0] bl: name = backlight_pwm
853[ 1.708072@0] bl: method = pwm(1)
854[ 1.708138@0] bl: register pwm_ch(5) 0xffffffc05b9a1c40
855[ 1.708140@0] bl: aml_bl_pwm_channel_register ok
856[ 1.708366@0] bl: probe OK
857[ 1.709678@0] meson_cdev probe
858[ 1.709688@0] thermal: read gpupp failed
859[ 1.711300@0] meson_cdev index: 0
860[ 1.711415@0] thermal: read gpupp failed
861[ 1.715207@0] meson_cdev index: 1
862[ 1.715213@0] cpucore_cooling_register, max_cpu_core_num:4
863[ 1.715378@0] meson_cdev index: 2
864[ 1.715381@0] thermal: read gpupp failed
865[ 1.719050@0] meson_cdev index: 3
866[ 1.719122@0] find tzd id: 0
867[ 1.719243@0] find tzd id: 0
868[ 1.719280@0] meson_cdev probe done
869[ 1.719769@0] gxbb_pm: enter meson_pm_probe!
870[ 1.719795@0] gxbb_pm: meson_pm_probe done
871[ 1.720492@0] ALSA device list:
872[ 1.720494@0] #0: AML-AUGESOUND
873[ 1.721688@0] Freeing unused kernel memory: 4224K
874[ 1.760149@0] fb: malloc_osd_memory, cma:ffffff800a994748
875[ 1.760156@0] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
876[ 1.760178@0] fb: use ion buffer for fb memory, fb_index=0
877[ 1.760181@0] fb: OSD0 as afbcd mode,afbc_type=2
878[ 1.778469@0] meson-fb fb: create ion_client ffffffc073943780, handle=ffffffc073a10280
879[ 1.778477@0] meson-fb fb: ion memory(0): created fb at 0x0000000078000000, size 75 MiB
880[ 1.778481@0] fb: 0, phy: 0x0000000078000000, vir:0xffffff800aa39000, size=77312K
881[ 1.778481@0]
882[ 1.778483@0] fb: Frame buffer memory assigned at
883[ 1.778486@0] fb: 0, phy: 0x0000000078000000, vir:0xffffff800aa39000, size=77312K
884[ 1.778486@0]
885[ 1.778488@0] fb: 0, phy: 0x0000000078000000, vir:0xffffff800aa39000, size=77312K
886[ 1.778488@0]
887[ 1.778491@0] fb: logo_index=0,fb_index=0
888[ 1.778493@0] fb: ---------------clear fb0 memory ffffff800aa39000
889[ 1.791848@0] fb: osd[0] canvas.idx =0x40
890[ 1.791851@0] fb: osd[0] canvas.addr=0x78000000
891[ 1.791853@0] fb: osd[0] canvas.width=7680
892[ 1.791855@0] fb: osd[0] canvas.height=2160
893[ 1.791856@0] fb: osd[0] frame.width=1920
894[ 1.791859@0] fb: osd[0] frame.height=1080
895[ 1.791860@0] fb: osd[0] out_addr_id =0x1
896[ 1.792531@0] fb: osd_release now.index=0,open_count=1
897[ 1.794379@2] fb: malloc_osd_memory, cma:ffffff800a994748
898[ 1.794385@2] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
899[ 1.794388@2] fb: use ion buffer for fb memory, fb_index=1
900[ 1.794389@2] fb: OSD1 as afbcd mode,afbc_type=2
901[ 1.794829@2] meson-fb fb: create ion_client ffffffc073943780, handle=ffffffc073886940
902[ 1.794833@2] meson-fb fb: ion memory(1): created fb at 0x000000007cc00000, size 1 MiB
903[ 1.794837@2] fb: 1, phy: 0x000000007cc00000, vir:0xffffff8008cf5000, size=1024K
904[ 1.794837@2]
905[ 1.794839@2] fb: Frame buffer memory assigned at
906[ 1.794842@2] fb: 1, phy: 0x000000007cc00000, vir:0xffffff8008cf5000, size=1024K
907[ 1.794842@2]
908[ 1.794845@2] fb: 1, phy: 0x000000007cc00000, vir:0xffffff8008cf5000, size=1024K
909[ 1.794845@2]
910[ 1.794848@2] fb: logo_index=0,fb_index=1
911[ 1.794851@2] fb: ---------------clear fb1 memory ffffff8008cf5000
912[ 1.795029@2] fb: osd[1] canvas.idx =0x43
913[ 1.795031@2] fb: osd[1] canvas.addr=0x7cc00000
914[ 1.795033@2] fb: osd[1] canvas.width=128
915[ 1.795036@2] fb: osd[1] canvas.height=32
916[ 1.795037@2] fb: osd[1] frame.width=32
917[ 1.795038@2] fb: osd[1] frame.height=32
918[ 1.795039@2] fb: osd[1] out_addr_id =0x2
919[ 1.809149@2] fb: osd_release now.index=1,open_count=1
920[ 1.825873@2] vfm_map_store:rm default
921[ 1.825873@2]
922[ 1.825931@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
923[ 1.825931@2]
924[ 1.826009@2] fb: osd[0] enable: 1 (sh)
925[ 1.842349@2] fb: osd[1] enable: 0 (sh)
926[ 1.892325@1] Console: switching to colour frame buffer device 240x67
927[ 1.913325@0] Checking disk(s): LABEL=COREELEC LABEL=STORAGE
928[ 1.917420@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
929[ 2.057716@0] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
930[ 2.057723@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
931[ 2.057727@0] usb 1-1: Product: USB 2.0 Hub
932[ 2.071444@0] hub 1-1:1.0: USB hub found
933[ 2.071494@0] hub 1-1:1.0: 4 ports detected
934[ 2.177549@0] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
935[ 2.200197@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0612
936[ 2.200204@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
937[ 2.200207@0] usb 2-1: Product: USB3.1 Hub
938[ 2.200209@0] usb 2-1: Manufacturer: GenesysLogic
939[ 2.215821@0] hub 2-1:1.0: USB hub found
940[ 2.216111@0] hub 2-1:1.0: 4 ports detected
941[ 2.337375@0] usb 1-2: new high-speed USB device number 3 using xhci-hcd
942[ 2.479767@0] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610
943[ 2.479774@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
944[ 2.479776@0] usb 1-2: Product: USB2.0 Hub
945[ 2.479780@0] usb 1-2: Manufacturer: GenesysLogic
946[ 2.487505@0] hub 1-2:1.0: USB hub found
947[ 2.487783@0] hub 1-2:1.0: 4 ports detected
948[ 2.501033@0] fsck: CP437: Invalid argument
949[ 2.501147@0] fsck: fsck.fat 3.0.28 (2015-05-16)
950[ 2.501285@0] fsck: /dev/mmcblk1p1: 27 files, 25856/65501 clusters
951[ 2.501497@0] fsck: STORAGE: clean, 1029/3665920 files, 483226/14659584 blocks
952[ 2.577381@0] usb 1-1.3: new full-speed USB device number 4 using xhci-hcd
953[ 2.702070@0] usb 1-1.3: New USB device found, idVendor=248a, idProduct=8367
954[ 2.702076@0] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
955[ 2.702080@0] usb 1-1.3: Product: SVEN Wireless Mouse
956[ 2.702082@0] usb 1-1.3: Manufacturer: Telink
957[ 2.715858@0] input: Telink SVEN Wireless Mouse as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:248A:8367.0001/input/input4
958[ 2.773829@0] hid-generic 0003:248A:8367.0001: input,hidraw0: USB HID v1.11 Mouse [Telink SVEN Wireless Mouse] on usb-xhci-hcd.0.auto-1.3/input0
959[ 2.776664@0] input: Telink SVEN Wireless Mouse as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:248A:8367.0002/input/input5
960[ 2.777456@0] usb 2-1.2: new SuperSpeed USB device number 3 using xhci-hcd
961[ 2.798256@0] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8153
962[ 2.798264@0] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
963[ 2.798266@0] usb 2-1.2: Product: USB 10/100/1000 LAN
964[ 2.798269@0] usb 2-1.2: Manufacturer: Realtek
965[ 2.798273@0] usb 2-1.2: SerialNumber: 000001
966[ 2.807625@0] usb 2-1.2: Unsupported device
967[ 2.807743@0] usb 2-1.2: Unsupported device
968[ 2.833989@0] hid-generic 0003:248A:8367.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink SVEN Wireless Mouse] on usb-xhci-hcd.0.auto-1.3/input1
969[ 2.955033@2] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
970[ 3.000820@2] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
971[ 3.512092@2] cgroup: cgroup2: unknown option "nsdelegate"
972[ 3.518081@2] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
973[ 3.518623@2] systemd[1]: Detected architecture arm64.
974[ 3.522791@2] systemd[1]: Set hostname to <CoreELEC>.
975[ 3.568928@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
976[ 3.568942@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
977[ 3.617680@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
978[ 3.617735@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
979[ 3.648391@2] systemd[1]: Listening on Journal Socket (/dev/log).
980[ 3.648882@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
981[ 3.649422@2] systemd[1]: Listening on Journal Audit Socket.
982[ 3.672743@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
983[ 3.759262@1] kernel-overlays-setup: setup base modules
984[ 3.888154@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.113
985[ 3.932590@2] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
986[ 3.932743@2] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
987[ 3.934078@2] kernel-overlays-setup: done
988[ 4.081769@3] media: Linux media interface: v0.10
989[ 4.108300@2] Linux video capture interface: v2.00
990[ 4.141031@2] amlvid:info: amlvideo_init called
991[ 4.141037@2] amlvid:info: amlvideo_create_instance called
992[ 4.141042@2] amlvid:info: v4l2_dev.name=:amlvideo-000
993[ 4.141238@2] amlvideo-000: V4L2 device registered as video10
994[ 4.141240@2] amlvid:info: amlvideo_create_instance called
995[ 4.141243@2] amlvid:info: v4l2_dev.name=:amlvideo-001
996[ 4.141445@2] amlvideo-001: V4L2 device registered as video23
997[ 4.155432@2] media_clock: loading out-of-tree module taints kernel.
998[ 4.156662@2] register clk_set_setting cpu[43]
999[ 4.157968@0] Registered firmware driver success.
1000[ 4.158683@0] Try to load video/h264_enc.bin ...
1001[ 4.158730@0] load firmware size : 76288, Name : video/h264_enc.bin.
1002[ 4.158738@0] the fw pack ver v0.0 is too lower.
1003[ 4.158739@0] it may work abnormally so need to be update in time.
1004[ 4.159406@0] Try to load video/video_ucode.bin ...
1005[ 4.160226@0] load firmware size : 1816576, Name : video/video_ucode.bin.
1006[ 4.160233@0] the fw pack ver v0.2 is too lower.
1007[ 4.160235@0] it may work abnormally so need to be update in time.
1008[ 4.186957@2] Amlogic A/V streaming port init
1009[ 4.191767@3] get gate demux control ok ffffffc073911cc0
1010[ 4.191801@3] get gate parser_top control ok ffffffc073911c00
1011[ 4.191841@3] get gate vdec control ok ffffffc073911440
1012[ 4.191877@3] get gate clk_81 control ok ffffffc073911580
1013[ 4.191915@3] get gate clk_vdec_mux control ok ffffffc0739115c0
1014[ 4.191959@3] get gate clk_hcodec_mux control ok ffffffc073911ac0
1015[ 4.192008@3] get gate clk_hevc_mux control ok ffffffc073911b40
1016[ 4.192062@3] get gate clk_hevcb_mux control ok ffffffc073911340
1017[ 4.192083@3] get gate ahbarb0 control ok ffffffc073911140
1018[ 4.192090@3] get gate asyncfifo control failed (null)
1019[ 4.208833@0] systemd-journald[2200]: Received request to flush runtime journal from PID 1
1020[ 4.214181@2] amvdec_avs module init
1021[ 4.216629@2] amvdec_h264 module init
1022[ 4.226137@3] amvdec_h265 module init
1023[ 4.230799@3] ammvdec_h264 module init
1024[ 4.239432@2] ammvdec_mpeg12 module init
1025[ 4.241329@2] ammvdec_mpeg4_driver_init_module
1026[ 4.258001@3] decoder registered as /dev/video26
1027[ 4.262048@3] amvdec_vc1 module init
1028[ 4.266409@3] amvdec_vp9 module init
1029[ 4.271644@3] amvenc_avc_probe -- reserved memory config fail.
1030[ 4.271652@3] amvenc_avc - cma memory pool size: 60 MB
1031[ 4.271678@3] encode_wq_init.
1032[ 4.271682@3] encode start monitor.
1033[ 4.275464@3] encode workqueue monitor start.
1034[ 4.276683@2] vpu_init
1035[ 4.276930@2] vpu_probe
1036[ 4.276934@2] HevcEnc reserved memory config fail.
1037[ 4.276936@2] HevcEnc - cma memory pool size: 64 MB
1038[ 4.276962@2] HevcEnc - wave420l_irq: 42
1039[ 4.277033@2] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff800f92c000
1040[ 4.277298@3] success to probe vpu device with video memory from cma
1041[ 4.283011@3] Triggered SDIO WiFi power on and bus rescan.
1042[ 4.283034@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
1043[ 4.557564@1] NET: Registered protocol family 10
1044[ 4.601440@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
1045[ 4.927366@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
1046[ 4.927373@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
1047[ 4.928388@2] meson-aml-mmc ffe03000.sdio: card claims to support voltages below defined range
1048[ 4.945511@2] meson-mmc: actual_clock :50000000, HHI_nand: 0x80
1049[ 4.945517@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000354
1050[ 4.946638@2] sdio: new high speed SDIO card at address 0001
1051[ 4.946642@2] sdio: clock 50000000, 4-bit-bus-width
1052[ 4.946642@2]
1053[ 4.946931@2] meson-mmc: [sdio_reinit] finish
1054[ 5.469427@0] fb: osd_release now.index=0,open_count=1
1055[ 5.469474@0] Console: switching to colour dummy device 80x25
1056[ 5.606556@2] meson-remote ff808040.meson-remote: add custom_code 0x0000FE01 to ir map table
1057[ 5.784197@2] [0] vcodec_dec decoder
1058[ 5.784862@2] [0] release decoder
1059[ 5.857052@1] usbcore: registered new interface driver r8152
1060[ 5.959265@1] usb 2-1.2: reset SuperSpeed USB device number 3 using xhci-hcd
1061[ 5.970999@3] usbcore: registered new interface driver cdc_ether
1062[ 6.030575@1] mali ffe40000.bifrost: Continuing without Mali regulator control
1063[ 6.030908@1] mali ffe40000.bifrost: max pp is 2
1064[ 6.030914@1] mali ffe40000.bifrost: set min pp to default 1
1065[ 6.030917@1] mali ffe40000.bifrost: min pp is 1
1066[ 6.030919@1] mali ffe40000.bifrost: set min clk default to 0
1067[ 6.030922@1] mali ffe40000.bifrost: min clk is 0
1068[ 6.030939@1] mali ffe40000.bifrost: hiu io source 0xffffff800fb20000
1069[ 6.030946@1] mali ffe40000.bifrost: hiu io source 0xffffff800fb22000
1070[ 6.030949@1] mali ffe40000.bifrost: num of pp used most of time 1
1071[ 6.030952@1] mali ffe40000.bifrost: clock dvfs cfg table size is 6
1072[ 6.031591@1] mali ffe40000.bifrost: max clk set 4
1073[ 6.031598@1] mali ffe40000.bifrost: max clk is 4
1074[ 6.031600@1] mali ffe40000.bifrost: turbo clk set to 5
1075[ 6.031603@1] mali ffe40000.bifrost: turbo clk is 5
1076[ 6.031605@1] mali ffe40000.bifrost: default clk set to 4
1077[ 6.031607@1] mali ffe40000.bifrost: default clk is 4
1078[ 6.031614@1] mali ffe40000.bifrost: ====================0====================
1079[ 6.031614@1] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
1080[ 6.031618@1] mali ffe40000.bifrost: ====================1====================
1081[ 6.031618@1] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
1082[ 6.031622@1] mali ffe40000.bifrost: ====================2====================
1083[ 6.031622@1] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
1084[ 6.031629@1] mali ffe40000.bifrost: ====================3====================
1085[ 6.031629@1] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
1086[ 6.031639@1] mali ffe40000.bifrost: ====================4====================
1087[ 6.031639@1] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
1088[ 6.031648@1] mali ffe40000.bifrost: ====================5====================
1089[ 6.031648@1] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
1090[ 6.031651@1] mali ffe40000.bifrost: clock dvfs table size is 6
1091[ 6.031930@1] mali_plat=ffffff8001fca5c0
1092[ 6.034398@1] find tzd id: 0
1093[ 6.034487@1] gpu cooling register okay with err=0
1094[ 6.036150@1] find tzd id: 0
1095[ 6.036170@1] gpu core cooling register okay with err=0
1096[ 6.036206@1] shader_present=1, tiler_present=1, l2_present=1
1097[ 6.036286@1] Mali_pwr_on:gpu_irq : 200
1098[ 6.037744@1] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
1099[ 6.049399@3] mali ffe40000.bifrost: Probed as mali0
1100[ 6.066694@1] r8152 2-1.2:1.0 eth1: v1.08.9
1101[ 6.421514@0] efuse tx_amp = 20
1102[ 6.421761@0] set phy setup_amp = 4
1103[ 6.437062@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
1104[ 6.439131@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1105[ 6.480345@2] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
1106[ 7.814875@1] OpenVFD: Version: V1.3.0
1107[ 7.814884@1] OpenVFD: vfd_gpio_clk: #0 = 0x00; #1 = 0x41; #2 = 0x00;
1108[ 7.814886@1] OpenVFD: vfd_gpio_dat: #0 = 0x00; #1 = 0x40; #2 = 0x00;
1109[ 7.814889@1] OpenVFD: vfd_gpio_stb: #0 = 0x01; #1 = 0x0A; #2 = 0x00;
1110[ 7.814892@1] OpenVFD: vfd_gpio0: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
1111[ 7.814894@1] OpenVFD: vfd_gpio1: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
1112[ 7.814897@1] OpenVFD: vfd_gpio2: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
1113[ 7.814899@1] OpenVFD: vfd_gpio3: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
1114[ 7.814902@1] OpenVFD: vfd_gpio_protocol: #0 = 0x00; #1 = 0x00;
1115[ 7.814905@1] OpenVFD: vfd_chars: #0 = 0x04; #1 = 0x00; #2 = 0x01; #3 = 0x02; #4 = 0x03;
1116[ 7.814909@1] OpenVFD: vfd_dot_bits: #0 = 0x00; #1 = 0x01; #2 = 0x02; #3 = 0x03; #4 = 0x04; #5 = 0x05; #6 = 0x06;
1117[ 7.814912@1] OpenVFD: vfd_display_type: #0 = 0x02; #1 = 0x00; #2 = 0x01; #3 = 0x00;
1118[ 7.814916@1] OpenVFD: Detected gpio chips: periphs-banks, aobus-banks.
1119[ 7.814920@1] OpenVFD: "periphs-banks" chip found. base = 410, pin count = 86, pin = 65, offset = 475
1120[ 7.814922@1] OpenVFD: "periphs-banks" chip found. base = 410, pin count = 86, pin = 64, offset = 474
1121[ 7.814924@1] OpenVFD: "aobus-banks" chip found. base = 496, pin count = 16, pin = 10, offset = 506
1122[ 7.814926@1] OpenVFD: Skipping vfd_gpio0 evaluation (0xFF)
1123[ 7.814927@1] OpenVFD: Skipping vfd_gpio1 evaluation (0xFF)
1124[ 7.814928@1] OpenVFD: Skipping vfd_gpio2 evaluation (0xFF)
1125[ 7.814929@1] OpenVFD: Skipping vfd_gpio3 evaluation (0xFF)
1126[ 7.815347@1] OpenVFD: Select FD628 controller
1127[ 7.815380@1] OpenVFD: SW SPI 3-wire interface intialized (LSB mode)
1128[ 9.096110@3] r8152 2-1.2:1.0 eth1: carrier on
1129[ 9.096183@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
1130[ 9.193401@3] 8021q: 802.1Q VLAN Support v1.8
1131[ 9.709107@3] the demux clock on, ref cnt: 1
1132[ 9.709116@3] the parser_top clock on, ref cnt: 1
1133[ 9.709119@3] the vdec clock on, ref cnt: 1
1134[ 9.709141@3] the clk_hevc_mux clock on, ref cnt: 1
1135[ 9.709144@3] the clk_hevcb_mux clock on, ref cnt: 1
1136[ 9.709251@3] hevc mux clock is 499999992 Hz
1137[ 9.709286@3] hevc back mux clock is 499999992 Hz
1138[ 9.709316@3] the clk_vdec_mux clock on, ref cnt: 1
1139[ 9.709447@3] vdec mux clock is 799999987 Hz
1140[ 9.709514@3] vdec_create instance ffffff800fc60000, total 1
1141[ 9.709536@3] vdec_disable_DMC input->target= 0x0
1142[ 9.709539@3] vdec_release instance ffffff800fc60000, total 1
1143[ 9.709570@3] the clk_vdec_mux clock off, ref cnt: 0
1144[ 9.709573@3] the vdec clock off, ref cnt: 0
1145[ 9.709576@3] the parser_top clock off, ref cnt: 0
1146[ 9.709581@3] the demux clock off, ref cnt: 0
1147[ 10.185516@1] aml_tdm_open
1148[ 10.185684@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1
1149[ 10.186925@1] tdm playback mute: 1, lane_cnt = 8
1150[ 10.187029@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1
1151[ 10.187564@1] aml_tdm_open
1152[ 10.187669@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1
1153[ 10.188647@1] tdm playback mute: 1, lane_cnt = 8
1154[ 10.188690@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1
1155[ 10.189185@1] aml_tdm_open
1156[ 10.189289@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1157[ 10.189650@1] tdm playback mute: 1, lane_cnt = 4
1158[ 10.189711@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1159[ 10.190256@1] aml_tdm_open
1160[ 10.190371@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1161[ 10.190662@1] tdm playback mute: 1, lane_cnt = 4
1162[ 10.190709@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1163[ 10.191249@1] aml_tdm_open
1164[ 10.191355@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1165[ 10.191712@1] tdm playback mute: 1, lane_cnt = 4
1166[ 10.191763@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1167[ 10.210931@1] aml_tdm_open
1168[ 10.211080@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1
1169[ 10.212908@1] tdm playback mute: 1, lane_cnt = 8
1170[ 10.213012@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1
1171[ 10.213668@1] aml_tdm_open
1172[ 10.213807@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1173[ 10.215104@1] tdm playback mute: 1, lane_cnt = 4
1174[ 10.215199@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1175[ 10.215943@1] aml_spdif_open
1176[ 10.216072@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@0
1177[ 10.216594@1] spdif_a keep clk continuous
1178[ 10.216599@1] aml_spdif_close
1179[ 10.216644@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@0
1180[ 10.217210@1] aml_spdif_open
1181[ 10.217304@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1182[ 10.218538@1] spdif_b keep clk continuous
1183[ 10.218548@1] aml_spdif_close
1184[ 10.218624@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1185[ 10.226583@2] audio_dsp: buf=0
1186[ 10.226590@2] audio_dsp: IEC958_mode_raw=0
1187[ 10.226632@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1188[ 10.226635@2] audio_dsp: last mode 0,now 0
1189[ 10.230805@2] aml_spdif_open
1190[ 10.231730@2] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1191[ 10.232665@2] set normal 512 fs /4 fs
1192[ 10.232718@2] set spdifout clk:5644800, mpll:22579200
1193[ 10.232721@2] get spdifout clk:5644797, mpll:22579186
1194[ 10.232724@2] aml_dai_set_spdif_fmt , fmt 0x4000
1195[ 10.232726@2] set normal 512 fs /4 fs
1196[ 10.232743@2] set spdifout clk:5644800, mpll:22579200
1197[ 10.232744@2] get spdifout clk:5644797, mpll:22579186
1198[ 10.232824@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1199[ 10.232830@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1200[ 10.232832@2] hdmitx: hw: set audio
1201[ 10.232835@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1202[ 10.232849@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
1203[ 10.232851@2] hdmitx: hw: aud_n_para = 5824
1204[ 10.232859@2] hdmitx: hw: set channel status
1205[ 10.232889@2] hdmitx: audio: Audio Type: PCM
1206[ 10.232892@2] hdmitx: err chn msk, must larger than 0
1207[ 10.232895@2] hdmitx: hw: set audio
1208[ 10.232897@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1209[ 10.232908@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
1210[ 10.232910@2] hdmitx: hw: aud_n_para = 8918
1211[ 10.232917@2] hdmitx: hw: set channel status
1212[ 10.232944@2] hdmitx: audio: Audio Type: PCM
1213[ 10.232946@2] hdmitx: audio: set audio param
1214[ 10.232950@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1215[ 10.233136@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1216[ 10.233143@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1217[ 10.233144@2] hdmitx: err chn msk, must larger than 0
1218[ 10.233149@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1219[ 10.234689@3] spdif_b keep clk continuous
1220[ 10.234700@3] aml_spdif_close
1221[ 10.234781@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1222[ 10.284068@3] fb: osd_release now.index=0,open_count=1
1223[ 10.300947@3] fb: malloc_osd_memory, cma:ffffff800a994748
1224[ 10.300956@3] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
1225[ 10.300959@3] fb: use ion buffer for fb memory, fb_index=2
1226[ 10.300960@3] fb: OSD2 as afbcd mode,afbc_type=2
1227[ 10.305179@3] meson-fb fb: create ion_client ffffffc073943780, handle=ffffffc05654b640
1228[ 10.305187@3] meson-fb fb: ion memory(2): created fb at 0x000000007cd00000, size 1 MiB
1229[ 10.305193@3] fb: 2, phy: 0x000000007cd00000, vir:0xffffff800fcaa000, size=1024K
1230[ 10.305193@3]
1231[ 10.305195@3] fb: Frame buffer memory assigned at
1232[ 10.305198@3] fb: 2, phy: 0x000000007cd00000, vir:0xffffff800fcaa000, size=1024K
1233[ 10.305198@3]
1234[ 10.305201@3] fb: 2, phy: 0x000000007cd00000, vir:0xffffff800fcaa000, size=1024K
1235[ 10.305201@3]
1236[ 10.305203@3] fb: logo_index=0,fb_index=2
1237[ 10.305205@3] fb: ---------------clear fb2 memory ffffff800fcaa000
1238[ 10.305457@3] fb: osd[2] canvas.idx =0x41
1239[ 10.305459@3] fb: osd[2] canvas.addr=0x7cd00000
1240[ 10.305461@3] fb: osd[2] canvas.width=128
1241[ 10.305462@3] fb: osd[2] canvas.height=32
1242[ 10.305463@3] fb: osd[2] frame.width=32
1243[ 10.305464@3] fb: osd[2] frame.height=32
1244[ 10.305466@3] fb: osd[2] out_addr_id =0x3
1245[ 10.317627@3] fb: vpu clkc clock is 199 MHZ
1246[ 10.317639@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 18
1247[ 10.317640@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 22
1248[ 10.317643@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53
1249[ 10.317650@3] fb: malloc_osd_memory, cma:ffffff800a994748
1250[ 10.317654@3] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
1251[ 10.317656@3] fb: use ion buffer for fb memory, fb_index=3
1252[ 10.317657@3] fb: OSD3 as afbcd mode,afbc_type=2
1253[ 10.324389@3] meson-fb fb: create ion_client ffffffc073943780, handle=ffffffc05654b7c0
1254[ 10.324398@3] meson-fb fb: ion memory(3): created fb at 0x000000007ce00000, size 8 MiB
1255[ 10.324401@3] fb: 3, phy: 0x000000007ce00000, vir:0xffffff800fdab000, size=8192K
1256[ 10.324401@3]
1257[ 10.324404@3] fb: Frame buffer memory assigned at
1258[ 10.324407@3] fb: 3, phy: 0x000000007ce00000, vir:0xffffff800fdab000, size=8192K
1259[ 10.324407@3]
1260[ 10.324410@3] fb: 3, phy: 0x000000007ce00000, vir:0xffffff800fdab000, size=8192K
1261[ 10.324410@3]
1262[ 10.324414@3] fb: logo_index=0,fb_index=3
1263[ 10.324416@3] fb: ---------------clear fb3 memory ffffff800fdab000
1264[ 10.326105@3] fb: osd[3] canvas.idx =0x42
1265[ 10.326109@3] fb: osd[3] canvas.addr=0x7ce00000
1266[ 10.326110@3] fb: osd[3] canvas.width=128
1267[ 10.326111@3] fb: osd[3] canvas.height=32
1268[ 10.326113@3] fb: osd[3] frame.width=32
1269[ 10.326114@3] fb: osd[3] frame.height=32
1270[ 10.326115@3] fb: osd[3] out_addr_id =0x4
1271[ 10.338232@3] hdmitx: system: set frac_rate_policy as 0
1272[ 10.338262@3] vout: vmode set to 720p60hz
1273[ 10.338345@3] fb: current vmode=720p60hz, cmd: 0x10000
1274[ 10.338357@3] hdmitx: hdmitx_set_current_vmode[3772]
1275[ 10.338359@3] hdmitx: system: recalc before 720p60hz 60 1
1276[ 10.338363@3] hdmitx: system: recalc after 720p60hz 60 1
1277[ 10.338368@3] hdmitx: system: get current mode: 720p60hz
1278[ 10.338371@3] hdmitx: system: update rx hdr info 0
1279[ 10.338373@3] hdmitx: system: update physcial size: 160 90
1280[ 10.338410@3] hdmitx: video: already init VIC = 0 Now VIC = 4
1281[ 10.338413@3] hdmitx: video: rx edid only support RGB format
1282[ 10.338416@3] hdmitx: hw: div40: 0
1283[ 10.367410@3] hdmitx: ddc w1b error 0x54 0x20 0x00
1284[ 10.367421@3] hdmitx: frac_rate = 0
1285[ 10.367423@3] hdmitx: hdmitx: set clk: VIC = 4 cd = 4 cs = 0 frac_rate = 0
1286[ 10.367429@3] hdmitx: config HPLL = 5940000 frac_rate = 0
1287[ 10.367483@3] hdmitx: HPLLv1: 0xdb3a04f7
1288[ 10.367484@3] hdmitx: config HPLL done
1289[ 10.367491@3] hdmitx: set_hpll_od3_clk_div[610] div = 6
1290[ 10.367497@3] hdmitx: j = 2 vid_clk_div = 1
1291[ 10.367503@3] hdmitx: set enc for VIC: 4
1292[ 10.489380@3] hdmitx: hw: config hdmitx IP vic = 4 cd:4 cs: 0
1293[ 10.499493@3] hdmitx: video: Sink is DVI device
1294[ 10.499541@3] hdmitx: hw: set audio
1295[ 10.499546@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1296[ 10.499560@3] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
1297[ 10.499562@3] hdmitx: hw: aud_n_para = 6272
1298[ 10.499572@3] hdmitx: hw: set channel status
1299[ 10.499601@3] hdmitx: audio: Audio Type: PCM
1300[ 10.499606@3] vout: new mode 720p60hz set ok
1301[ 10.499611@3] fb: current vmode=720p60hz, cmd: 0x20000
1302[ 10.499618@3] fb: outputmode changed to 720p60hz, reset osd0, (0, 0, 1919, 1079) -> (0, 0, 1279, 719)
1303[ 10.516212@3] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
1304[ 10.516217@3] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
1305[ 10.549528@3] fb: osd[0] enable: 1 (kodi.bin)
1306[ 10.566192@3] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
1307[ 10.566194@3] fb: osd_update_disp_axis_hw:dispdata(0,0,1279,719)
1308[ 10.582858@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1309[ 10.582860@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1310[ 10.599899@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1311[ 10.599900@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1312[ 10.616360@3] fb: osd[0] canvas.idx =0x40
1313[ 10.616361@3] fb: osd[0] canvas.addr=0x78000000
1314[ 10.616364@3] fb: osd[0] canvas.width=5120
1315[ 10.616365@3] fb: osd[0] canvas.height=1440
1316[ 10.616365@3] fb: osd[0] frame.width=1280
1317[ 10.616366@3] fb: osd[0] frame.height=720
1318[ 10.616367@3] fb: osd[0] out_addr_id =0x1
1319[ 10.650438@3] audio_dsp: buf=0
1320[ 10.650446@3] audio_dsp: IEC958_mode_raw=0
1321[ 10.650485@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1322[ 10.650487@3] audio_dsp: last mode 0,now 0
1323[ 10.654476@3] aml_spdif_open
1324[ 10.654623@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1325[ 10.655490@3] set normal 512 fs /4 fs
1326[ 10.655534@3] set spdifout clk:5644800, mpll:22579200
1327[ 10.655538@3] get spdifout clk:5644797, mpll:22579186
1328[ 10.655541@3] aml_dai_set_spdif_fmt , fmt 0x4000
1329[ 10.655545@3] set normal 512 fs /4 fs
1330[ 10.655560@3] set spdifout clk:5644800, mpll:22579200
1331[ 10.655562@3] get spdifout clk:5644797, mpll:22579186
1332[ 10.655618@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1333[ 10.655626@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1334[ 10.655628@3] hdmitx: err chn msk, must larger than 0
1335[ 10.655633@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1336[ 10.655795@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1337[ 10.655799@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1338[ 10.655800@3] hdmitx: err chn msk, must larger than 0
1339[ 10.655804@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1340[ 10.656887@3] spdif_b keep clk continuous
1341[ 10.656897@3] aml_spdif_close
1342[ 10.656959@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1343[ 10.681368@2] vout: aml_tvout_mode_work: monitor stop
1344[ 11.173859@2] vout: vmode set to null
1345[ 11.173944@2] fb: current vmode=720p60hz, cmd: 0x10000
1346[ 11.173995@2] vout: new mode null set ok
1347[ 11.173997@2] fb: current vmode=null, cmd: 0x20000
1348[ 11.174094@2] hdmitx: system: set frac_rate_policy as 0
1349[ 11.174118@2] vout: vmode set to 720p60hz
1350[ 11.174156@2] fb: current vmode=null, cmd: 0x10000
1351[ 11.174163@2] hdmitx: hdmitx_set_current_vmode[3772]
1352[ 11.174164@2] hdmitx: system: recalc before 720p60hz 60 1
1353[ 11.174167@2] hdmitx: system: recalc after 720p60hz 60 1
1354[ 11.174173@2] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0x0a839630 (VIC: 4)
1355[ 11.174174@2] hdmitx: system: get current mode: 720p60hz
1356[ 11.174177@2] hdmitx: system: update rx hdr info 0
1357[ 11.174179@2] hdmitx: system: update physcial size: 160 90
1358[ 11.174189@2] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0a839630 (VIC: 4)
1359[ 11.174191@2] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour
1360[ 11.174215@2] hdmitx: video: already init VIC = 0 Now VIC = 4
1361[ 11.174217@2] hdmitx: video: rx edid only support RGB format
1362[ 11.174220@2] hdmitx: hw: div40: 0
1363[ 11.201714@0] hdmitx: system: irq 80000001 0
1364[ 11.203500@2] hdmitx: ddc w1b error 0x54 0x20 0x00
1365[ 11.203510@2] hdmitx: frac_rate = 0
1366[ 11.203512@2] hdmitx: hdmitx: set clk: VIC = 4 cd = 4 cs = 0 frac_rate = 0
1367[ 11.203518@2] hdmitx: config HPLL = 5940000 frac_rate = 0
1368[ 11.203574@2] hdmitx: HPLLv1: 0xdb3a04f7
1369[ 11.203575@2] hdmitx: config HPLL done
1370[ 11.203582@2] hdmitx: set_hpll_od3_clk_div[610] div = 6
1371[ 11.203588@2] hdmitx: j = 2 vid_clk_div = 1
1372[ 11.203594@2] hdmitx: set enc for VIC: 4
1373[ 11.305372@2] hdmitx: [0x10000104]: 0x00000001
1374[ 11.305378@2] hdmitx: [0x10000180]: 0x000000ff
1375[ 11.305381@2] hdmitx: [0x10000181]: 0x000000ff
1376[ 11.305384@2] hdmitx: [0x10000182]: 0x00000003
1377[ 11.305387@2] hdmitx: [0x10000183]: 0x00000007
1378[ 11.305389@2] hdmitx: [0x10000184]: 0x0000003f
1379[ 11.305392@2] hdmitx: [0x10000185]: 0x00000002
1380[ 11.305394@2] hdmitx: [0x10000187]: 0x000000ff
1381[ 11.305395@2] hdmitx: [0x10000188]: 0x00000003
1382[ 11.325368@2] hdmitx: hw: config hdmitx IP vic = 4 cd:4 cs: 0
1383[ 11.335476@2] hdmitx: video: Sink is DVI device
1384[ 11.335523@2] hdmitx: hw: set audio
1385[ 11.335529@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1386[ 11.335540@2] hdmitx: fs = 2, cd = 4, tmds_clk = 74250
1387[ 11.335543@2] hdmitx: hw: aud_n_para = 6272
1388[ 11.335552@2] hdmitx: hw: set channel status
1389[ 11.335580@2] hdmitx: audio: Audio Type: PCM
1390[ 11.335585@2] vout: new mode 720p60hz set ok
1391[ 11.335589@2] fb: current vmode=720p60hz, cmd: 0x20000
1392[ 11.335595@2] fb: outputmode changed to 720p60hz, reset osd0, (0, 0, 1279, 719) -> (0, 0, 1279, 719)
1393[ 11.352189@2] fb: osd_update_disp_axis_hw:pan_data(0,0,1279,719)
1394[ 11.352192@2] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
1395[ 11.385513@2] fb: osd[0] enable: 1 (kodi.bin)
1396[ 11.402345@2] fb: osd_update_disp_axis_hw:pan_data(0,0,1279,719)
1397[ 11.402346@2] fb: osd_update_disp_axis_hw:dispdata(0,0,1279,719)
1398[ 11.419137@2] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1399[ 11.419140@2] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1400[ 11.435813@2] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1401[ 11.435816@2] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1402[ 11.469969@3] audio_dsp: buf=0
1403[ 11.469978@3] audio_dsp: IEC958_mode_raw=0
1404[ 11.470014@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1405[ 11.470016@3] audio_dsp: last mode 0,now 0
1406[ 11.473920@3] aml_spdif_open
1407[ 11.474298@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1408[ 11.475170@3] set normal 512 fs /4 fs
1409[ 11.475221@3] set spdifout clk:5644800, mpll:22579200
1410[ 11.475227@3] get spdifout clk:5644797, mpll:22579186
1411[ 11.475231@3] aml_dai_set_spdif_fmt , fmt 0x4000
1412[ 11.475233@3] set normal 512 fs /4 fs
1413[ 11.475248@3] set spdifout clk:5644800, mpll:22579200
1414[ 11.475251@3] get spdifout clk:5644797, mpll:22579186
1415[ 11.475306@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1416[ 11.475312@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1417[ 11.475314@3] hdmitx: err chn msk, must larger than 0
1418[ 11.475319@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1419[ 11.475447@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1420[ 11.475452@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1421[ 11.475453@3] hdmitx: err chn msk, must larger than 0
1422[ 11.475457@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1423[ 11.476589@3] spdif_b keep clk continuous
1424[ 11.476599@3] aml_spdif_close
1425[ 11.476659@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1426[ 14.020288@0] OpenVFD: Select FD628 controller
1427[ 62.489368@0] fb: mem_free_work, free memory: addr:800000
1428CoreELEC:~ #