· 5 years ago · Nov 16, 2020, 02:22 PM
1root@Borg:~# dmesg
2[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2018- 05-08
3[ 0.000000] Linux version 4.19.107-Unraid (root@Develop) (gcc version 9.2.0 ( GCC)) #1 SMP Thu Mar 5 13:55:57 PST 2020
4[ 0.000000] Command line: BOOT_IMAGE=/bzimage initrd=/bzroot
5[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
6[ 0.000000] BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
8[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf378fff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000cf379000-0x00000000cf38efff] reserved
10[ 0.000000] BIOS-e820: [mem 0x00000000cf38f000-0x00000000cf3cdfff] ACPI data
11[ 0.000000] BIOS-e820: [mem 0x00000000cf3ce000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c2fffffff] usable
15[ 0.000000] NX (Execute Disable) protection: active
16[ 0.000000] SMBIOS 2.6 present.
17[ 0.000000] DMI: Dell Inc. PowerEdge R510/0DPRKF, BIOS 1.12.0 07/26/2013
18[ 0.000000] tsc: Fast TSC calibration using PIT
19[ 0.000000] tsc: Detected 2533.493 MHz processor
20[ 0.002434] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
21[ 0.002435] e820: remove [mem 0x000a0000-0x000fffff] usable
22[ 0.002440] last_pfn = 0xc30000 max_arch_pfn = 0x400000000
23[ 0.002443] MTRR default type: uncachable
24[ 0.002444] MTRR fixed ranges enabled:
25[ 0.002445] 00000-9FFFF write-back
26[ 0.002446] A0000-BFFFF uncachable
27[ 0.002447] C0000-CBFFF write-protect
28[ 0.002447] CC000-D7FFF write-back
29[ 0.002448] D8000-EBFFF uncachable
30[ 0.002449] EC000-FFFFF write-protect
31[ 0.002449] MTRR variable ranges enabled:
32[ 0.002450] 0 base 0000000000 mask FF80000000 write-back
33[ 0.002452] 1 base 0080000000 mask FFC0000000 write-back
34[ 0.002453] 2 base 00C0000000 mask FFF0000000 write-back
35[ 0.002454] 3 base 0100000000 mask FF00000000 write-back
36[ 0.002455] 4 base 0200000000 mask FE00000000 write-back
37[ 0.002456] 5 base 0400000000 mask FC00000000 write-back
38[ 0.002457] 6 base 0800000000 mask FC00000000 write-back
39[ 0.002458] 7 base 0C00000000 mask FFC0000000 write-back
40[ 0.002458] 8 disabled
41[ 0.002459] 9 disabled
42[ 0.003940] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
43[ 0.004252] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
44[ 0.004258] last_pfn = 0xcf379 max_arch_pfn = 0x400000000
45[ 0.012901] found SMP MP-table at [mem 0x000fe710-0x000fe71f]
46[ 0.012919] Using GB pages for direct mapping
47[ 0.012922] BRK [0x02401000, 0x02401fff] PGTABLE
48[ 0.012925] BRK [0x02402000, 0x02402fff] PGTABLE
49[ 0.012927] BRK [0x02403000, 0x02403fff] PGTABLE
50[ 0.012974] BRK [0x02404000, 0x02404fff] PGTABLE
51[ 0.013370] RAMDISK: [mem 0x78443000-0x7fffffff]
52[ 0.013380] ACPI: Early table checksum verification disabled
53[ 0.016057] ACPI: RSDP 0x00000000000F1530 000024 (v02 DELL )
54[ 0.016060] ACPI: XSDT 0x00000000000F1634 00009C (v01 DELL PE_SC3 0000000 1 DELL 00000001)
55[ 0.016066] ACPI: FACP 0x00000000CF3B3F9C 0000F4 (v03 DELL PE_SC3 0000000 1 DELL 00000001)
56[ 0.016071] ACPI: DSDT 0x00000000CF38F000 003B44 (v01 DELL PE_SC3 0000000 1 INTL 20050624)
57[ 0.016075] ACPI: FACS 0x00000000CF3B6000 000040
58[ 0.016077] ACPI: FACS 0x00000000CF3B6000 000040
59[ 0.016080] ACPI: APIC 0x00000000CF3B3478 00015E (v01 DELL PE_SC3 0000000 1 DELL 00000001)
60[ 0.016083] ACPI: SPCR 0x00000000CF3B35D8 000050 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
61[ 0.016087] ACPI: HPET 0x00000000CF3B362C 000038 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
62[ 0.016090] ACPI: DMAR 0x00000000CF3B3668 0001D0 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
63[ 0.016093] ACPI: MCFG 0x00000000CF3B38C4 00003C (v01 DELL PE_SC3 0000000 1 DELL 00000001)
64[ 0.016096] ACPI: WD__ 0x00000000CF3B3904 000134 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
65[ 0.016099] ACPI: SLIC 0x00000000CF3B3A3C 000024 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
66[ 0.016102] ACPI: ERST 0x00000000CF392CE4 000270 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
67[ 0.016106] ACPI: HEST 0x00000000CF392F54 0003A8 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
68[ 0.016109] ACPI: BERT 0x00000000CF392B44 000030 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
69[ 0.016112] ACPI: EINJ 0x00000000CF392B74 000170 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
70[ 0.016115] ACPI: SRAT 0x00000000CF3B3BC0 000370 (v01 DELL PE_SC3 0000000 1 DELL 00000001)
71[ 0.016118] ACPI: TCPA 0x00000000CF3B3F34 000064 (v02 DELL PE_SC3 0000000 1 DELL 00000001)
72[ 0.016122] ACPI: SSDT 0x00000000CF3B7000 0068F4 (v01 INTEL PPM RCM 8000000 1 INTL 20061109)
73[ 0.016133] ACPI: Local APIC address 0xfee00000
74[ 0.016169] SRAT: PXM 1 -> APIC 0x20 -> Node 0
75[ 0.016170] SRAT: PXM 2 -> APIC 0x00 -> Node 1
76[ 0.016171] SRAT: PXM 1 -> APIC 0x22 -> Node 0
77[ 0.016172] SRAT: PXM 2 -> APIC 0x02 -> Node 1
78[ 0.016173] SRAT: PXM 1 -> APIC 0x24 -> Node 0
79[ 0.016174] SRAT: PXM 2 -> APIC 0x04 -> Node 1
80[ 0.016175] SRAT: PXM 1 -> APIC 0x30 -> Node 0
81[ 0.016176] SRAT: PXM 2 -> APIC 0x10 -> Node 1
82[ 0.016177] SRAT: PXM 1 -> APIC 0x32 -> Node 0
83[ 0.016178] SRAT: PXM 2 -> APIC 0x12 -> Node 1
84[ 0.016179] SRAT: PXM 1 -> APIC 0x34 -> Node 0
85[ 0.016179] SRAT: PXM 2 -> APIC 0x14 -> Node 1
86[ 0.016180] SRAT: PXM 1 -> APIC 0x21 -> Node 0
87[ 0.016181] SRAT: PXM 2 -> APIC 0x01 -> Node 1
88[ 0.016182] SRAT: PXM 1 -> APIC 0x23 -> Node 0
89[ 0.016183] SRAT: PXM 2 -> APIC 0x03 -> Node 1
90[ 0.016184] SRAT: PXM 1 -> APIC 0x25 -> Node 0
91[ 0.016185] SRAT: PXM 2 -> APIC 0x05 -> Node 1
92[ 0.016186] SRAT: PXM 1 -> APIC 0x31 -> Node 0
93[ 0.016187] SRAT: PXM 2 -> APIC 0x11 -> Node 1
94[ 0.016188] SRAT: PXM 1 -> APIC 0x33 -> Node 0
95[ 0.016189] SRAT: PXM 2 -> APIC 0x13 -> Node 1
96[ 0.016189] SRAT: PXM 1 -> APIC 0x35 -> Node 0
97[ 0.016190] SRAT: PXM 2 -> APIC 0x15 -> Node 1
98[ 0.016194] ACPI: SRAT: Node 1 PXM 2 [mem 0x00000000-0xcfffffff]
99[ 0.016195] ACPI: SRAT: Node 1 PXM 2 [mem 0x100000000-0x62fffffff]
100[ 0.016196] ACPI: SRAT: Node 0 PXM 1 [mem 0x630000000-0xc2fffffff]
101[ 0.016199] NUMA: Node 1 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x62f ffffff] -> [mem 0x00000000-0x62fffffff]
102[ 0.016203] NODE_DATA(0) allocated [mem 0xc2fffa000-0xc2fffdfff]
103[ 0.016208] NODE_DATA(1) allocated [mem 0x62fffc000-0x62fffffff]
104[ 0.016277] Zone ranges:
105[ 0.016278] DMA [mem 0x0000000000001000-0x0000000000ffffff]
106[ 0.016279] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
107[ 0.016281] Normal [mem 0x0000000100000000-0x0000000c2fffffff]
108[ 0.016282] Movable zone start for each node
109[ 0.016283] Early memory node ranges
110[ 0.016284] node 1: [mem 0x0000000000001000-0x000000000009dfff]
111[ 0.016285] node 1: [mem 0x0000000000100000-0x00000000cf378fff]
112[ 0.016286] node 1: [mem 0x0000000100000000-0x000000062fffffff]
113[ 0.016287] node 0: [mem 0x0000000630000000-0x0000000c2fffffff]
114[ 0.016345] Zeroed struct page in unavailable ranges: 3306 pages
115[ 0.016346] Initmem setup node 0 [mem 0x0000000630000000-0x0000000c2fffffff]
116[ 0.016348] On node 0 totalpages: 6291456
117[ 0.016350] Normal zone: 98304 pages used for memmap
118[ 0.016351] Normal zone: 6291456 pages, LIFO batch:63
119[ 0.164078] Initmem setup node 1 [mem 0x0000000000001000-0x000000062fffffff]
120[ 0.164082] On node 1 totalpages: 6288150
121[ 0.164084] DMA zone: 64 pages used for memmap
122[ 0.164084] DMA zone: 21 pages reserved
123[ 0.164086] DMA zone: 3997 pages, LIFO batch:0
124[ 0.164228] DMA32 zone: 13198 pages used for memmap
125[ 0.164229] DMA32 zone: 844665 pages, LIFO batch:63
126[ 0.186153] Normal zone: 84992 pages used for memmap
127[ 0.186156] Normal zone: 5439488 pages, LIFO batch:63
128[ 0.324247] ACPI: PM-Timer IO Port: 0x808
129[ 0.324253] ACPI: Local APIC address 0xfee00000
130[ 0.324264] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
131[ 0.324275] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
132[ 0.324281] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
133[ 0.324284] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
134[ 0.324286] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
135[ 0.324288] ACPI: IRQ0 used by override.
136[ 0.324290] ACPI: IRQ9 used by override.
137[ 0.324293] Using ACPI (MADT) for SMP configuration information
138[ 0.324295] ACPI: HPET id: 0x8086a301 base: 0xfed00000
139[ 0.324300] ACPI: SPCR: SPCR table version 1
140[ 0.324301] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte siz e
141[ 0.324303] ACPI: SPCR: console: uart,mmio,0x0
142[ 0.324306] smpboot: Allowing 24 CPUs, 0 hotplug CPUs
143[ 0.324322] [mem 0xd0000000-0xdfffffff] available for PCI devices
144[ 0.324324] Booting paravirtualized kernel on bare hardware
145[ 0.324328] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 1910969940391419 ns
146[ 0.441763] random: get_random_bytes called from start_kernel+0x8e/0x46c with crng_init=0
147[ 0.441769] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_no de_ids:2
148[ 0.443316] percpu: Embedded 43 pages/cpu s135192 r8192 d32744 u262144
149[ 0.443324] pcpu-alloc: s135192 r8192 d32744 u262144 alloc=1*2097152
150[ 0.443325] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 -- -- -- --
151[ 0.443329] pcpu-alloc: [1] 01 03 05 07 09 11 13 15 [1] 17 19 21 23 -- -- -- --
152[ 0.443357] Built 2 zonelists, mobility grouping on. Total pages: 12383027
153[ 0.443358] Policy zone: Normal
154[ 0.443360] Kernel command line: BOOT_IMAGE=/bzimage initrd=/bzroot
155[ 0.443422] log_buf_len individual max cpu contribution: 4096 bytes
156[ 0.443423] log_buf_len total cpu_extra contributions: 94208 bytes
157[ 0.443424] log_buf_len min size: 131072 bytes
158[ 0.443495] log_buf_len: 262144 bytes
159[ 0.443496] early log buf free: 120788(92%)
160[ 0.654266] Memory: 49314160K/50318424K available (10252K kernel code, 736K r wdata, 2004K rodata, 1196K init, 2100K bss, 1004264K reserved, 0K cma-reserved)
161[ 0.654454] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
162[ 0.654464] Kernel/User page tables isolation: enabled
163[ 0.654711] rcu: Hierarchical RCU implementation.
164[ 0.654712] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=24.
165[ 0.654714] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
166[ 0.654772] NR_IRQS: 16640, nr_irqs: 1160, preallocated irqs: 16
167[ 0.655088] rcu: Offload RCU callbacks from CPUs: (none).
168[ 0.662053] Console: colour VGA+ 80x25
169[ 0.698823] console [tty0] enabled
170[ 0.699119] mempolicy: Enabling automatic NUMA balancing. Configure with numa _balancing= or the kernel.numa_balancing sysctl
171[ 0.699607] ACPI: Core revision 20180810
172[ 0.700057] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 133484882848 ns
173[ 0.700527] hpet clockevent registered
174[ 0.700534] APIC: Switch to symmetric I/O mode setup
175[ 0.700787] DMAR-IR: This system BIOS has enabled interrupt remapping
176 on a chipset that contains an erratum making that
177 feature unstable. To maintain system stability
178 interrupt remapping is being disabled. Please
179 contact your BIOS vendor for an update
180[ 0.701900] Switched APIC routing to physical flat.
181[ 0.702809] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
182[ 0.707534] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x24 84d15fff9, max_idle_ns: 440795266809 ns
183[ 0.708007] Calibrating delay loop (skipped), value calculated using timer fr equency.. 5066.98 BogoMIPS (lpj=2533493)
184[ 0.708473] pid_max: default: 32768 minimum: 301
185[ 0.723013] Dentry cache hash table entries: 8388608 (order: 14, 67108864 byt es)
186[ 0.730162] Inode-cache hash table entries: 4194304 (order: 13, 33554432 byte s)
187[ 0.730676] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
188[ 0.731157] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 by tes)
189[ 0.731753] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
190[ 0.731999] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
191[ 0.732270] CPU0: Thermal monitoring enabled (TM1)
192[ 0.732530] process: using mwait in idle threads
193[ 0.732785] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
194[ 0.732999] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
195[ 0.733252] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin ter sanitization
196[ 0.733713] Spectre V2 : Mitigation: Full generic retpoline
197[ 0.733999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c ontext switch
198[ 0.734256] Spectre V2 : Enabling Restricted Speculation for firmware calls
199[ 0.734519] Spectre V2 : mitigation: Enabling conditional Indirect Branch Pre diction Barrier
200[ 0.734998] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
201[ 0.735999] Speculative Store Bypass: Mitigation: Speculative Store Bypass di sabled via prctl and seccomp
202[ 0.736480] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
203[ 0.737206] Freeing SMP alternatives memory: 32K
204[ 0.739820] smpboot: CPU 0 Converting physical 1 to logical package 0
205[ 0.842103] smpboot: CPU0: Intel(R) Xeon(R) CPU E5649 @ 2.53GHz (f amily: 0x6, model: 0x2c, stepping: 0x2)
206[ 0.842735] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Int el PMU driver.
207[ 0.842997] core: CPUID marked event: 'bus cycles' unavailable
208[ 0.843001] ... version: 3
209[ 0.843252] ... bit width: 48
210[ 0.843498] ... generic registers: 4
211[ 0.843744] ... value mask: 0000ffffffffffff
212[ 0.843998] ... max period: 000000007fffffff
213[ 0.844250] ... fixed-purpose events: 3
214[ 0.844499] ... event mask: 000000070000000f
215[ 0.844807] rcu: Hierarchical SRCU implementation.
216[ 0.845422] smp: Bringing up secondary CPUs ...
217[ 0.846020] x86: Booting SMP configuration:
218[ 0.846270] .... node #1, CPUs: #1
219[ 0.047883] smpboot: CPU 1 Converting physical 0 to logical package 1
220[ 0.910109] .... node #0, CPUs: #2
221[ 0.914001] .... node #1, CPUs: #3
222[ 0.917000] .... node #0, CPUs: #4
223[ 0.920296] .... node #1, CPUs: #5
224[ 0.923375] .... node #0, CPUs: #6
225[ 0.926396] .... node #1, CPUs: #7
226[ 0.929376] .... node #0, CPUs: #8
227[ 0.932402] .... node #1, CPUs: #9
228[ 0.935377] .... node #0, CPUs: #10
229[ 0.938401] .... node #1, CPUs: #11
230[ 0.941351] .... node #0, CPUs: #12
231[ 0.943256] MDS CPU bug present and SMT on, data leak possible. See https://w ww.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
232[ 0.944149] .... node #1, CPUs: #13
233[ 0.946377] .... node #0, CPUs: #14
234[ 0.948399] .... node #1, CPUs: #15
235[ 0.950369] .... node #0, CPUs: #16
236[ 0.953000] .... node #1, CPUs: #17
237[ 0.955000] .... node #0, CPUs: #18
238[ 0.957381] .... node #1, CPUs: #19
239[ 0.959373] .... node #0, CPUs: #20
240[ 0.961395] .... node #1, CPUs: #21
241[ 0.963377] .... node #0, CPUs: #22
242[ 0.965405] .... node #1, CPUs: #23
243[ 0.967043] smp: Brought up 2 nodes, 24 CPUs
244[ 0.968001] smpboot: Max logical packages: 2
245[ 0.968249] smpboot: Total of 24 processors activated (121602.88 BogoMIPS)
246[ 0.972075] devtmpfs: initialized
247[ 0.972321] x86/mm: Memory block size: 128MB
248[ 0.980696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 1911260446275000 ns
249[ 0.981032] futex hash table entries: 8192 (order: 7, 524288 bytes)
250[ 0.981470] xor: measuring software checksum speed
251[ 0.991831] prefetch64-sse: 13388.000 MB/sec
252[ 1.001831] generic_sse: 11432.000 MB/sec
253[ 1.001999] xor: using function: prefetch64-sse (13388.000 MB/sec)
254[ 1.002268] pinctrl core: initialized pinctrl subsystem
255[ 1.003511] NET: Registered protocol family 16
256[ 1.004113] cpuidle: using governor ladder
257[ 1.004113] cpuidle: using governor menu
258[ 1.004301] ACPI FADT declares the system doesn't support PCIe ASPM, so disab le it
259[ 1.004568] ACPI: bus type PCI registered
260[ 1.005082] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef ffffff] (base 0xe0000000)
261[ 1.005572] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
262[ 1.006021] PCI: Using configuration type 1 for base access
263[ 1.010081] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
264[ 1.010274] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
265[ 1.027081] raid6: sse2x1 gen() 6289 MB/s
266[ 1.044080] raid6: sse2x1 xor() 4683 MB/s
267[ 1.061079] raid6: sse2x2 gen() 7550 MB/s
268[ 1.078074] raid6: sse2x2 xor() 5621 MB/s
269[ 1.095078] raid6: sse2x4 gen() 8660 MB/s
270[ 1.112076] raid6: sse2x4 xor() 6298 MB/s
271[ 1.112326] raid6: using algorithm sse2x4 gen() 8660 MB/s
272[ 1.112579] raid6: .... xor() 6298 MB/s, rmw enabled
273[ 1.112836] raid6: using ssse3x2 recovery algorithm
274[ 1.114128] ACPI: Added _OSI(Module Device)
275[ 1.114378] ACPI: Added _OSI(Processor Device)
276[ 1.114630] ACPI: Added _OSI(3.0 _SCP Extensions)
277[ 1.114881] ACPI: Added _OSI(Processor Aggregator Device)
278[ 1.115002] ACPI: Added _OSI(Linux-Dell-Video)
279[ 1.115251] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
280[ 1.117765] ACPI: 2 ACPI AML tables successfully acquired and loaded
281[ 1.118413] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
282[ 1.121956] ACPI: Interpreter enabled
283[ 1.123012] ACPI: (supports S0 S5)
284[ 1.123258] ACPI: Using IOAPIC for interrupt routing
285[ 1.123537] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug
286[ 1.124131] ACPI: Enabled 2 GPEs in block 00 to 3F
287[ 1.130015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
288[ 1.131004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI]
289[ 1.131565] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LT R]
290[ 1.131819] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS c onfiguration
291[ 1.132143] PCI host bridge to bus 0000:00
292[ 1.132393] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
293[ 1.132648] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
294[ 1.133000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow]
295[ 1.133256] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff win dow]
296[ 1.133510] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff win dow]
297[ 1.133767] pci_bus 0000:00: root bus resource [bus 00-ff]
298[ 1.134011] pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
299[ 1.134044] pci 0000:00:00.0: enabling Extended Tags
300[ 1.134330] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
301[ 1.134415] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
302[ 1.134443] pci 0000:00:01.0: enabling Extended Tags
303[ 1.134727] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
304[ 1.134810] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
305[ 1.134810] pci 0000:00:03.0: enabling Extended Tags
306[ 1.134810] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
307[ 1.135000] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
308[ 1.135000] pci 0000:00:07.0: enabling Extended Tags
309[ 1.135000] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
310[ 1.135010] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
311[ 1.135010] pci 0000:00:09.0: enabling Extended Tags
312[ 1.135034] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
313[ 1.135116] pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400
314[ 1.135143] pci 0000:00:0a.0: enabling Extended Tags
315[ 1.135428] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
316[ 1.136009] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
317[ 1.136010] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
318[ 1.136010] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
319[ 1.136010] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
320[ 1.136010] pci 0000:00:1a.0: reg 0x20: [io 0xac40-0xac5f]
321[ 1.136018] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
322[ 1.136060] pci 0000:00:1a.1: reg 0x20: [io 0xac60-0xac7f]
323[ 1.136158] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
324[ 1.136179] pci 0000:00:1a.7: reg 0x10: [mem 0xdf0fe000-0xdf0fe3ff]
325[ 1.136259] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
326[ 1.137009] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
327[ 1.137009] pci 0000:00:1d.0: reg 0x20: [io 0xac80-0xac9f]
328[ 1.137009] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
329[ 1.137009] pci 0000:00:1d.1: reg 0x20: [io 0xaca0-0xacbf]
330[ 1.137011] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
331[ 1.137011] pci 0000:00:1d.2: reg 0x20: [io 0xacc0-0xacdf]
332[ 1.137011] pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
333[ 1.137011] pci 0000:00:1d.3: reg 0x20: [io 0xace0-0xacff]
334[ 1.137011] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
335[ 1.137011] pci 0000:00:1d.7: reg 0x10: [mem 0xdf0ff000-0xdf0ff3ff]
336[ 1.137011] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
337[ 1.137014] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
338[ 1.137122] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
339[ 1.137202] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI /GPIO/TCO
340[ 1.137461] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
341[ 1.137718] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
342[ 1.137977] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
343[ 1.139001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
344[ 1.139383] pci 0000:01:00.0: [14e4:163b] type 00 class 0x020000
345[ 1.139407] pci 0000:01:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
346[ 1.139501] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
347[ 1.139585] pci 0000:01:00.1: [14e4:163b] type 00 class 0x020000
348[ 1.139608] pci 0000:01:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
349[ 1.139702] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
350[ 1.139702] pci 0000:00:01.0: PCI bridge to [bus 01]
351[ 1.139702] pci 0000:00:01.0: bridge window [mem 0xda000000-0xddffffff]
352[ 1.139998] pci 0000:02:00.0: [1000:0079] type 00 class 0x010400
353[ 1.139998] pci 0000:02:00.0: reg 0x10: [io 0xfc00-0xfcff]
354[ 1.139998] pci 0000:02:00.0: reg 0x14: [mem 0xdf1bc000-0xdf1bffff 64bit]
355[ 1.139998] pci 0000:02:00.0: reg 0x1c: [mem 0xdf1c0000-0xdf1fffff 64bit]
356[ 1.139998] pci 0000:02:00.0: reg 0x30: [mem 0xdf100000-0xdf13ffff pref]
357[ 1.139998] pci 0000:02:00.0: enabling Extended Tags
358[ 1.139998] pci 0000:02:00.0: supports D1 D2
359[ 1.139998] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth, limited b y 5 GT/s x4 link at 0000:00:03.0 (capable of 32.000 Gb/s with 5 GT/s x8 link)
360[ 1.141044] pci 0000:00:03.0: PCI bridge to [bus 02]
361[ 1.141301] pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
362[ 1.141303] pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf1fffff]
363[ 1.141352] pci 0000:03:00.0: [12d8:2608] type 01 class 0x060400
364[ 1.141433] pci 0000:03:00.0: supports D1 D2
365[ 1.141434] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
366[ 1.141509] pci 0000:00:07.0: PCI bridge to [bus 03-08]
367[ 1.141768] pci 0000:00:07.0: bridge window [io 0xb000-0xefff]
368[ 1.141770] pci 0000:00:07.0: bridge window [mem 0xdf200000-0xdf5fffff]
369[ 1.141774] pci 0000:00:07.0: bridge window [mem 0xd9800000-0xd9bfffff 64bi t pref]
370[ 1.141821] pci 0000:04:01.0: [12d8:2608] type 01 class 0x060400
371[ 1.141821] pci 0000:04:01.0: supports D1 D2
372[ 1.141821] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
373[ 1.141821] pci 0000:04:02.0: [12d8:2608] type 01 class 0x060400
374[ 1.141821] pci 0000:04:02.0: supports D1 D2
375[ 1.141821] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
376[ 1.142008] pci 0000:04:03.0: [12d8:2608] type 01 class 0x060400
377[ 1.142008] pci 0000:04:03.0: supports D1 D2
378[ 1.142008] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold
379[ 1.142008] pci 0000:04:04.0: [12d8:2608] type 01 class 0x060400
380[ 1.142008] pci 0000:04:04.0: supports D1 D2
381[ 1.142008] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
382[ 1.142008] pci 0000:03:00.0: PCI bridge to [bus 04-08]
383[ 1.142008] pci 0000:03:00.0: bridge window [io 0xb000-0xefff]
384[ 1.142008] pci 0000:03:00.0: bridge window [mem 0xdf200000-0xdf5fffff]
385[ 1.142008] pci 0000:03:00.0: bridge window [mem 0xd9800000-0xd9bfffff 64bi t pref]
386[ 1.142008] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
387[ 1.142008] pci 0000:05:00.0: reg 0x10: [io 0xec00-0xecff]
388[ 1.142008] pci 0000:05:00.0: reg 0x18: [mem 0xdf5ff000-0xdf5fffff 64bit]
389[ 1.142008] pci 0000:05:00.0: reg 0x20: [mem 0xd9bfc000-0xd9bfffff 64bit pref ]
390[ 1.142092] pci 0000:05:00.0: supports D1 D2
391[ 1.142093] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
392[ 1.142198] pci 0000:04:01.0: PCI bridge to [bus 05]
393[ 1.142453] pci 0000:04:01.0: bridge window [io 0xe000-0xefff]
394[ 1.142456] pci 0000:04:01.0: bridge window [mem 0xdf500000-0xdf5fffff]
395[ 1.142460] pci 0000:04:01.0: bridge window [mem 0xd9b00000-0xd9bfffff 64bi t pref]
396[ 1.143007] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
397[ 1.143007] pci 0000:06:00.0: reg 0x10: [io 0xdc00-0xdcff]
398[ 1.143007] pci 0000:06:00.0: reg 0x18: [mem 0xdf4ff000-0xdf4fffff 64bit]
399[ 1.143007] pci 0000:06:00.0: reg 0x20: [mem 0xd9afc000-0xd9afffff 64bit pref ]
400[ 1.143007] pci 0000:06:00.0: supports D1 D2
401[ 1.143007] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
402[ 1.143008] pci 0000:04:02.0: PCI bridge to [bus 06]
403[ 1.143008] pci 0000:04:02.0: bridge window [io 0xd000-0xdfff]
404[ 1.143008] pci 0000:04:02.0: bridge window [mem 0xdf400000-0xdf4fffff]
405[ 1.143010] pci 0000:04:02.0: bridge window [mem 0xd9a00000-0xd9afffff 64bi t pref]
406[ 1.143063] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
407[ 1.143092] pci 0000:07:00.0: reg 0x10: [io 0xcc00-0xccff]
408[ 1.143118] pci 0000:07:00.0: reg 0x18: [mem 0xdf3ff000-0xdf3fffff 64bit]
409[ 1.143135] pci 0000:07:00.0: reg 0x20: [mem 0xd99fc000-0xd99fffff 64bit pref ]
410[ 1.143229] pci 0000:07:00.0: supports D1 D2
411[ 1.143231] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
412[ 1.144007] pci 0000:04:03.0: PCI bridge to [bus 07]
413[ 1.144007] pci 0000:04:03.0: bridge window [io 0xc000-0xcfff]
414[ 1.144007] pci 0000:04:03.0: bridge window [mem 0xdf300000-0xdf3fffff]
415[ 1.144007] pci 0000:04:03.0: bridge window [mem 0xd9900000-0xd99fffff 64bi t pref]
416[ 1.144012] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
417[ 1.144012] pci 0000:08:00.0: reg 0x10: [io 0xbc00-0xbcff]
418[ 1.144012] pci 0000:08:00.0: reg 0x18: [mem 0xdf2ff000-0xdf2fffff 64bit]
419[ 1.144012] pci 0000:08:00.0: reg 0x20: [mem 0xd98fc000-0xd98fffff 64bit pref ]
420[ 1.144012] pci 0000:08:00.0: supports D1 D2
421[ 1.144012] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
422[ 1.144012] pci 0000:04:04.0: PCI bridge to [bus 08]
423[ 1.145003] pci 0000:04:04.0: bridge window [io 0xb000-0xbfff]
424[ 1.145006] pci 0000:04:04.0: bridge window [mem 0xdf200000-0xdf2fffff]
425[ 1.145010] pci 0000:04:04.0: bridge window [mem 0xd9800000-0xd98fffff 64bi t pref]
426[ 1.145064] pci 0000:00:09.0: PCI bridge to [bus 09]
427[ 1.145375] pci 0000:0a:00.0: [1912:0014] type 00 class 0x0c0330
428[ 1.145412] pci 0000:0a:00.0: reg 0x10: [mem 0xdf6fe000-0xdf6fffff 64bit]
429[ 1.145553] pci 0000:0a:00.0: PME# supported from D0 D3hot
430[ 1.145666] pci 0000:00:0a.0: PCI bridge to [bus 0a]
431[ 1.146003] pci 0000:00:0a.0: bridge window [mem 0xdf600000-0xdf6fffff]
432[ 1.146023] pci_bus 0000:0b: extended config space not accessible
433[ 1.146302] pci 0000:0b:03.0: [102b:0532] type 00 class 0x030000
434[ 1.146318] pci 0000:0b:03.0: reg 0x10: [mem 0xd9000000-0xd97fffff pref]
435[ 1.146326] pci 0000:0b:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
436[ 1.146335] pci 0000:0b:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
437[ 1.146365] pci 0000:0b:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
438[ 1.146457] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
439[ 1.146716] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
440[ 1.146721] pci 0000:00:1e.0: bridge window [mem 0xd9000000-0xd97fffff 64bi t pref]
441[ 1.146723] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (sub tractive decode)
442[ 1.146724] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (sub tractive decode)
443[ 1.146726] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff wind ow] (subtractive decode)
444[ 1.146727] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff wind ow] (subtractive decode)
445[ 1.146729] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff wind ow] (subtractive decode)
446[ 1.148416] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
447[ 1.148743] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
448[ 1.149073] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
449[ 1.149394] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
450[ 1.149714] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
451[ 1.149714] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
452[ 1.149714] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
453[ 1.149719] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
454[ 1.151023] pci 0000:0b:03.0: vgaarb: setting as boot VGA device
455[ 1.151274] pci 0000:0b:03.0: vgaarb: VGA device added: decodes=io+mem,owns=i o+mem,locks=none
456[ 1.151745] pci 0000:0b:03.0: vgaarb: bridge control possible
457[ 1.152001] vgaarb: loaded
458[ 1.152331] SCSI subsystem initialized
459[ 1.152617] libata version 3.00 loaded.
460[ 1.152617] ACPI: bus type USB registered
461[ 1.153021] usbcore: registered new interface driver usbfs
462[ 1.153286] usbcore: registered new interface driver hub
463[ 1.153609] usbcore: registered new device driver usb
464[ 1.153609] pps_core: LinuxPPS API ver. 1 registered
465[ 1.153609] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
466[ 1.154026] PTP clock support registered
467[ 1.154026] EDAC MC: Ver: 3.0.0
468[ 1.155028] PCI: Using ACPI for IRQ routing
469[ 1.160485] PCI: Discovered peer bus fe
470[ 1.160737] PCI: root bus fe: using default resources
471[ 1.160738] PCI: Probing PCI hardware (bus fe)
472[ 1.160998] PCI host bridge to bus 0000:fe
473[ 1.161000] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
474[ 1.161256] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
475[ 1.161511] pci_bus 0000:fe: No busn resource found for root bus, will use [b us fe-ff]
476[ 1.161773] pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domai n [bus 00-ff] (conflicts with (null) [bus 00-ff])
477[ 1.161778] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
478[ 1.161998] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
479[ 1.162009] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
480[ 1.162009] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
481[ 1.162009] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
482[ 1.162015] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
483[ 1.162056] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
484[ 1.162098] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
485[ 1.163009] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
486[ 1.163011] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
487[ 1.163011] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
488[ 1.163011] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
489[ 1.163011] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
490[ 1.163011] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
491[ 1.163011] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
492[ 1.163011] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
493[ 1.163011] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
494[ 1.163011] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
495[ 1.163011] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
496[ 1.163011] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
497[ 1.163011] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
498[ 1.163011] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
499[ 1.163011] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
500[ 1.163011] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
501[ 1.163011] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
502[ 1.163011] pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [ bus 00-ff] (conflicts with (null) [bus 00-ff])
503[ 1.163011] PCI: Discovered peer bus ff
504[ 1.164000] PCI: root bus ff: using default resources
505[ 1.164000] PCI: Probing PCI hardware (bus ff)
506[ 1.164022] PCI host bridge to bus 0000:ff
507[ 1.164270] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
508[ 1.164521] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
509[ 1.164773] pci_bus 0000:ff: No busn resource found for root bus, will use [b us ff-ff]
510[ 1.165000] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [ bus 00-ff] (conflicts with (null) [bus 00-ff])
511[ 1.165006] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000
512[ 1.165053] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
513[ 1.165100] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
514[ 1.165144] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
515[ 1.165188] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
516[ 1.165233] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
517[ 1.165278] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000
518[ 1.165324] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000
519[ 1.165369] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
520[ 1.165413] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
521[ 1.165457] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000
522[ 1.165500] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
523[ 1.165545] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
524[ 1.165590] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
525[ 1.165637] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
526[ 1.165682] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
527[ 1.165730] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
528[ 1.165774] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
529[ 1.165817] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
530[ 1.165862] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
531[ 1.165862] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
532[ 1.165862] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
533[ 1.166009] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
534[ 1.166009] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
535[ 1.166010] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
536[ 1.166010] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [ bus 00-ff] (conflicts with (null) [bus 00-ff])
537[ 1.166010] PCI: pci_cache_line_size set to 64 bytes
538[ 1.166010] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
539[ 1.166010] e820: reserve RAM buffer [mem 0xcf379000-0xcfffffff]
540[ 1.166743] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
541[ 1.167000] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
542[ 1.170053] clocksource: Switched to clocksource tsc-early
543[ 1.170452] FS-Cache: Loaded
544[ 1.170710] pnp: PnP ACPI init
545[ 1.171074] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
546[ 1.171115] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
547[ 1.171350] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
548[ 1.171577] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
549[ 1.172625] system 00:04: [io 0x0800-0x087f] has been reserved
550[ 1.172883] system 00:04: [io 0x0880-0x08ff] could not be reserved
551[ 1.173138] system 00:04: [io 0x0900-0x091f] has been reserved
552[ 1.173389] system 00:04: [io 0x0920-0x0923] has been reserved
553[ 1.173643] system 00:04: [io 0x0924] has been reserved
554[ 1.173899] system 00:04: [io 0x0c00-0x0c7f] has been reserved
555[ 1.174152] system 00:04: [io 0x0ca0-0x0ca7] has been reserved
556[ 1.174411] system 00:04: [io 0x0ca9-0x0cab] has been reserved
557[ 1.174671] system 00:04: [io 0x0cad-0x0caf] has been reserved
558[ 1.174932] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
559[ 1.174981] pnp 00:05: [irq 0 disabled]
560[ 1.175023] system 00:05: [io 0x0ca8] has been reserved
561[ 1.175275] system 00:05: [io 0x0cac] has been reserved
562[ 1.175530] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (act ive)
563[ 1.176378] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
564[ 1.181714] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
565[ 1.181809] system 00:07: [mem 0xfed90000-0xfed91fff] has been reserved
566[ 1.182070] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
567[ 1.182241] pnp: PnP ACPI: found 8 devices
568[ 1.189264] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns
569[ 1.189809] pci 0000:00:01.0: PCI bridge to [bus 01]
570[ 1.190065] pci 0000:00:01.0: bridge window [mem 0xda000000-0xddffffff]
571[ 1.190324] pci 0000:00:03.0: PCI bridge to [bus 02]
572[ 1.190575] pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
573[ 1.190833] pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf1fffff]
574[ 1.191093] pci 0000:04:01.0: PCI bridge to [bus 05]
575[ 1.191345] pci 0000:04:01.0: bridge window [io 0xe000-0xefff]
576[ 1.191600] pci 0000:04:01.0: bridge window [mem 0xdf500000-0xdf5fffff]
577[ 1.191856] pci 0000:04:01.0: bridge window [mem 0xd9b00000-0xd9bfffff 64bi t pref]
578[ 1.192112] pci 0000:04:02.0: PCI bridge to [bus 06]
579[ 1.192361] pci 0000:04:02.0: bridge window [io 0xd000-0xdfff]
580[ 1.192613] pci 0000:04:02.0: bridge window [mem 0xdf400000-0xdf4fffff]
581[ 1.192868] pci 0000:04:02.0: bridge window [mem 0xd9a00000-0xd9afffff 64bi t pref]
582[ 1.193124] pci 0000:04:03.0: PCI bridge to [bus 07]
583[ 1.193376] pci 0000:04:03.0: bridge window [io 0xc000-0xcfff]
584[ 1.193632] pci 0000:04:03.0: bridge window [mem 0xdf300000-0xdf3fffff]
585[ 1.193895] pci 0000:04:03.0: bridge window [mem 0xd9900000-0xd99fffff 64bi t pref]
586[ 1.194154] pci 0000:04:04.0: PCI bridge to [bus 08]
587[ 1.194406] pci 0000:04:04.0: bridge window [io 0xb000-0xbfff]
588[ 1.194662] pci 0000:04:04.0: bridge window [mem 0xdf200000-0xdf2fffff]
589[ 1.194920] pci 0000:04:04.0: bridge window [mem 0xd9800000-0xd98fffff 64bi t pref]
590[ 1.195184] pci 0000:03:00.0: PCI bridge to [bus 04-08]
591[ 1.195435] pci 0000:03:00.0: bridge window [io 0xb000-0xefff]
592[ 1.195693] pci 0000:03:00.0: bridge window [mem 0xdf200000-0xdf5fffff]
593[ 1.195949] pci 0000:03:00.0: bridge window [mem 0xd9800000-0xd9bfffff 64bi t pref]
594[ 1.196207] pci 0000:00:07.0: PCI bridge to [bus 03-08]
595[ 1.196459] pci 0000:00:07.0: bridge window [io 0xb000-0xefff]
596[ 1.196717] pci 0000:00:07.0: bridge window [mem 0xdf200000-0xdf5fffff]
597[ 1.196974] pci 0000:00:07.0: bridge window [mem 0xd9800000-0xd9bfffff 64bi t pref]
598[ 1.197232] pci 0000:00:09.0: PCI bridge to [bus 09]
599[ 1.197487] pci 0000:00:0a.0: PCI bridge to [bus 0a]
600[ 1.197744] pci 0000:00:0a.0: bridge window [mem 0xdf600000-0xdf6fffff]
601[ 1.198007] pci 0000:0b:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref ]
602[ 1.198266] pci 0000:00:1e.0: PCI bridge to [bus 0b]
603[ 1.198516] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
604[ 1.198773] pci 0000:00:1e.0: bridge window [mem 0xd9000000-0xd97fffff 64bi t pref]
605[ 1.199034] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
606[ 1.199035] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
607[ 1.199037] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
608[ 1.199038] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff window]
609[ 1.199040] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
610[ 1.199041] pci_bus 0000:01: resource 1 [mem 0xda000000-0xddffffff]
611[ 1.199043] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
612[ 1.199044] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
613[ 1.199045] pci_bus 0000:03: resource 0 [io 0xb000-0xefff]
614[ 1.199047] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf5fffff]
615[ 1.199048] pci_bus 0000:03: resource 2 [mem 0xd9800000-0xd9bfffff 64bit pref ]
616[ 1.199049] pci_bus 0000:04: resource 0 [io 0xb000-0xefff]
617[ 1.199051] pci_bus 0000:04: resource 1 [mem 0xdf200000-0xdf5fffff]
618[ 1.199052] pci_bus 0000:04: resource 2 [mem 0xd9800000-0xd9bfffff 64bit pref ]
619[ 1.199053] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
620[ 1.199055] pci_bus 0000:05: resource 1 [mem 0xdf500000-0xdf5fffff]
621[ 1.199056] pci_bus 0000:05: resource 2 [mem 0xd9b00000-0xd9bfffff 64bit pref ]
622[ 1.199057] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
623[ 1.199059] pci_bus 0000:06: resource 1 [mem 0xdf400000-0xdf4fffff]
624[ 1.199060] pci_bus 0000:06: resource 2 [mem 0xd9a00000-0xd9afffff 64bit pref ]
625[ 1.199062] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
626[ 1.199063] pci_bus 0000:07: resource 1 [mem 0xdf300000-0xdf3fffff]
627[ 1.199064] pci_bus 0000:07: resource 2 [mem 0xd9900000-0xd99fffff 64bit pref ]
628[ 1.199066] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
629[ 1.199067] pci_bus 0000:08: resource 1 [mem 0xdf200000-0xdf2fffff]
630[ 1.199068] pci_bus 0000:08: resource 2 [mem 0xd9800000-0xd98fffff 64bit pref ]
631[ 1.199070] pci_bus 0000:0a: resource 1 [mem 0xdf600000-0xdf6fffff]
632[ 1.199071] pci_bus 0000:0b: resource 1 [mem 0xde000000-0xdeffffff]
633[ 1.199073] pci_bus 0000:0b: resource 2 [mem 0xd9000000-0xd97fffff 64bit pref ]
634[ 1.199074] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7 window]
635[ 1.199075] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff window]
636[ 1.199077] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff window]
637[ 1.199078] pci_bus 0000:0b: resource 7 [mem 0xd0000000-0xfdffffff window]
638[ 1.199079] pci_bus 0000:0b: resource 8 [mem 0xfed40000-0xfed44fff window]
639[ 1.199099] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
640[ 1.199100] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
641[ 1.199104] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
642[ 1.199105] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
643[ 1.199164] NET: Registered protocol family 2
644[ 1.199679] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524 288 bytes)
645[ 1.200193] TCP established hash table entries: 524288 (order: 10, 4194304 by tes)
646[ 1.201258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
647[ 1.201695] TCP: Hash tables configured (established 524288 bind 65536)
648[ 1.202055] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
649[ 1.202551] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
650[ 1.203118] NET: Registered protocol family 1
651[ 1.216231] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x60d took 11489 us ecs
652[ 1.219015] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't det ermine size of non-standard VPD format)
653[ 1.219913] pci 0000:0b:03.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff]
654[ 1.220255] PCI: CLS 64 bytes, default 64
655[ 1.220315] Unpacking initramfs...
656[ 18.053507] Freeing initrd memory: 126708K
657[ 18.053804] DMAR: Host address width 40
658[ 18.054065] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
659[ 18.054350] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ec ap f020fe
660[ 18.054607] DMAR: RMRR base: 0x000000cf4c8000 end: 0x000000cf4dffff
661[ 18.054857] DMAR: RMRR base: 0x000000cf4b1000 end: 0x000000cf4bffff
662[ 18.055111] DMAR: RMRR base: 0x000000cf4a1000 end: 0x000000cf4a1fff
663[ 18.055365] DMAR: RMRR base: 0x000000cf4a3000 end: 0x000000cf4a3fff
664[ 18.055617] DMAR: RMRR base: 0x000000cf4a5000 end: 0x000000cf4a5fff
665[ 18.055871] DMAR: RMRR base: 0x000000cf4a7000 end: 0x000000cf4a7fff
666[ 18.056128] DMAR: RMRR base: 0x000000cf4a9000 end: 0x000000cf4a9fff
667[ 18.056377] DMAR: RMRR base: 0x000000cf4c0000 end: 0x000000cf4c0fff
668[ 18.056627] DMAR: RMRR base: 0x000000cf4c2000 end: 0x000000cf4c2fff
669[ 18.056879] DMAR: ATSR flags: 0x0
670[ 18.057413] DMAR: dmar0: Using Queued invalidation
671[ 18.057682] DMAR: Setting RMRR:
672[ 18.058169] DMAR: Setting identity map for device 0000:00:1d.7 [0xcf4c2000 - 0xcf4c2fff]
673[ 18.058720] DMAR: Setting identity map for device 0000:00:1a.7 [0xcf4c0000 - 0xcf4c0fff]
674[ 18.059241] DMAR: Setting identity map for device 0000:00:1d.2 [0xcf4a9000 - 0xcf4a9fff]
675[ 18.059732] DMAR: Setting identity map for device 0000:00:1d.1 [0xcf4a7000 - 0xcf4a7fff]
676[ 18.060262] DMAR: Setting identity map for device 0000:00:1d.0 [0xcf4a5000 - 0xcf4a5fff]
677[ 18.060762] DMAR: Setting identity map for device 0000:00:1a.1 [0xcf4a3000 - 0xcf4a3fff]
678[ 18.061279] DMAR: Setting identity map for device 0000:00:1a.0 [0xcf4a1000 - 0xcf4a1fff]
679[ 18.061549] DMAR: Setting identity map for device 0000:00:1a.0 [0xcf4b1000 - 0xcf4bffff]
680[ 18.061803] DMAR: Setting identity map for device 0000:00:1a.1 [0xcf4b1000 - 0xcf4bffff]
681[ 18.062064] DMAR: Setting identity map for device 0000:00:1d.0 [0xcf4b1000 - 0xcf4bffff]
682[ 18.062321] DMAR: Setting identity map for device 0000:00:1d.1 [0xcf4b1000 - 0xcf4bffff]
683[ 18.062578] DMAR: Setting identity map for device 0000:00:1d.2 [0xcf4b1000 - 0xcf4bffff]
684[ 18.062830] DMAR: Setting identity map for device 0000:00:1a.7 [0xcf4c8000 - 0xcf4dffff]
685[ 18.063097] DMAR: Setting identity map for device 0000:00:1d.7 [0xcf4c8000 - 0xcf4dffff]
686[ 18.063353] DMAR: Prepare 0-16MiB unity mapping for LPC
687[ 18.063864] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xfffff f]
688[ 18.064310] DMAR: Intel(R) Virtualization Technology for Directed I/O
689[ 18.064617] iommu: Adding device 0000:00:00.0 to group 0
690[ 18.064883] iommu: Adding device 0000:00:01.0 to group 1
691[ 18.065156] iommu: Adding device 0000:00:03.0 to group 2
692[ 18.065426] iommu: Adding device 0000:00:07.0 to group 3
693[ 18.065696] iommu: Adding device 0000:00:09.0 to group 4
694[ 18.065965] iommu: Adding device 0000:00:0a.0 to group 5
695[ 18.066281] iommu: Adding device 0000:00:14.0 to group 6
696[ 18.066550] iommu: Adding device 0000:00:14.1 to group 6
697[ 18.066819] iommu: Adding device 0000:00:14.2 to group 6
698[ 18.067125] iommu: Adding device 0000:00:1a.0 to group 7
699[ 18.067390] iommu: Adding device 0000:00:1a.1 to group 7
700[ 18.067657] iommu: Adding device 0000:00:1a.7 to group 7
701[ 18.067987] iommu: Adding device 0000:00:1d.0 to group 8
702[ 18.068260] iommu: Adding device 0000:00:1d.1 to group 8
703[ 18.068527] iommu: Adding device 0000:00:1d.2 to group 8
704[ 18.068799] iommu: Adding device 0000:00:1d.3 to group 8
705[ 18.069074] iommu: Adding device 0000:00:1d.7 to group 8
706[ 18.069348] iommu: Adding device 0000:00:1e.0 to group 9
707[ 18.069639] iommu: Adding device 0000:00:1f.0 to group 10
708[ 18.069950] iommu: Adding device 0000:01:00.0 to group 11
709[ 18.070243] iommu: Adding device 0000:01:00.1 to group 11
710[ 18.070520] iommu: Adding device 0000:02:00.0 to group 12
711[ 18.070796] iommu: Adding device 0000:03:00.0 to group 13
712[ 18.071078] iommu: Adding device 0000:04:01.0 to group 14
713[ 18.071358] iommu: Adding device 0000:04:02.0 to group 15
714[ 18.071635] iommu: Adding device 0000:04:03.0 to group 16
715[ 18.071916] iommu: Adding device 0000:04:04.0 to group 17
716[ 18.072201] iommu: Adding device 0000:05:00.0 to group 18
717[ 18.072488] iommu: Adding device 0000:06:00.0 to group 19
718[ 18.072772] iommu: Adding device 0000:07:00.0 to group 20
719[ 18.073060] iommu: Adding device 0000:08:00.0 to group 21
720[ 18.073336] iommu: Adding device 0000:0a:00.0 to group 22
721[ 18.073593] iommu: Adding device 0000:0b:03.0 to group 9
722[ 18.073887] iommu: Adding device 0000:fe:00.0 to group 23
723[ 18.074168] iommu: Adding device 0000:fe:00.1 to group 23
724[ 18.074512] iommu: Adding device 0000:fe:02.0 to group 24
725[ 18.074785] iommu: Adding device 0000:fe:02.1 to group 24
726[ 18.075061] iommu: Adding device 0000:fe:02.2 to group 24
727[ 18.075340] iommu: Adding device 0000:fe:02.3 to group 24
728[ 18.075616] iommu: Adding device 0000:fe:02.4 to group 24
729[ 18.075887] iommu: Adding device 0000:fe:02.5 to group 24
730[ 18.076208] iommu: Adding device 0000:fe:03.0 to group 25
731[ 18.076484] iommu: Adding device 0000:fe:03.1 to group 25
732[ 18.076759] iommu: Adding device 0000:fe:03.2 to group 25
733[ 18.077033] iommu: Adding device 0000:fe:03.4 to group 25
734[ 18.077348] iommu: Adding device 0000:fe:04.0 to group 26
735[ 18.077622] iommu: Adding device 0000:fe:04.1 to group 26
736[ 18.077891] iommu: Adding device 0000:fe:04.2 to group 26
737[ 18.078163] iommu: Adding device 0000:fe:04.3 to group 26
738[ 18.078476] iommu: Adding device 0000:fe:05.0 to group 27
739[ 18.078747] iommu: Adding device 0000:fe:05.1 to group 27
740[ 18.079019] iommu: Adding device 0000:fe:05.2 to group 27
741[ 18.079290] iommu: Adding device 0000:fe:05.3 to group 27
742[ 18.079608] iommu: Adding device 0000:fe:06.0 to group 28
743[ 18.079883] iommu: Adding device 0000:fe:06.1 to group 28
744[ 18.080160] iommu: Adding device 0000:fe:06.2 to group 28
745[ 18.080441] iommu: Adding device 0000:fe:06.3 to group 28
746[ 18.080745] iommu: Adding device 0000:ff:00.0 to group 29
747[ 18.081036] iommu: Adding device 0000:ff:00.1 to group 29
748[ 18.081390] iommu: Adding device 0000:ff:02.0 to group 30
749[ 18.081676] iommu: Adding device 0000:ff:02.1 to group 30
750[ 18.081960] iommu: Adding device 0000:ff:02.2 to group 30
751[ 18.082248] iommu: Adding device 0000:ff:02.3 to group 30
752[ 18.082534] iommu: Adding device 0000:ff:02.4 to group 30
753[ 18.082816] iommu: Adding device 0000:ff:02.5 to group 30
754[ 18.083147] iommu: Adding device 0000:ff:03.0 to group 31
755[ 18.083435] iommu: Adding device 0000:ff:03.1 to group 31
756[ 18.083720] iommu: Adding device 0000:ff:03.2 to group 31
757[ 18.084008] iommu: Adding device 0000:ff:03.4 to group 31
758[ 18.084337] iommu: Adding device 0000:ff:04.0 to group 32
759[ 18.084623] iommu: Adding device 0000:ff:04.1 to group 32
760[ 18.084908] iommu: Adding device 0000:ff:04.2 to group 32
761[ 18.085203] iommu: Adding device 0000:ff:04.3 to group 32
762[ 18.085539] iommu: Adding device 0000:ff:05.0 to group 33
763[ 18.085834] iommu: Adding device 0000:ff:05.1 to group 33
764[ 18.086138] iommu: Adding device 0000:ff:05.2 to group 33
765[ 18.086437] iommu: Adding device 0000:ff:05.3 to group 33
766[ 18.086765] iommu: Adding device 0000:ff:06.0 to group 34
767[ 18.087054] iommu: Adding device 0000:ff:06.1 to group 34
768[ 18.087341] iommu: Adding device 0000:ff:06.2 to group 34
769[ 18.087632] iommu: Adding device 0000:ff:06.3 to group 34
770[ 18.093740] workingset: timestamp_bits=40 max_order=24 bucket_order=0
771[ 18.095913] squashfs: version 4.0 (2009/01/31) Phillip Lougher
772[ 18.096269] fuse init (API version 7.27)
773[ 18.097504] Key type asymmetric registered
774[ 18.097771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 51)
775[ 18.098105] io scheduler noop registered
776[ 18.098361] io scheduler deadline registered (default)
777[ 18.098655] io scheduler cfq registered
778[ 18.098913] io scheduler mq-deadline registered (default)
779[ 18.099179] io scheduler kyber registered
780[ 18.099442] io scheduler bfq registered
781[ 18.100488] pcieport 0000:00:01.0: Signaling PME with IRQ 26
782[ 18.100799] pcieport 0000:00:01.0: AER enabled with IRQ 26
783[ 18.106598] pcieport 0000:00:03.0: Signaling PME with IRQ 27
784[ 18.106897] pcieport 0000:00:03.0: AER enabled with IRQ 27
785[ 18.107524] pcieport 0000:00:07.0: Signaling PME with IRQ 28
786[ 18.107828] pcieport 0000:00:07.0: AER enabled with IRQ 28
787[ 18.108458] pcieport 0000:00:09.0: Signaling PME with IRQ 29
788[ 18.108758] pcieport 0000:00:09.0: AER enabled with IRQ 29
789[ 18.109137] pcieport 0000:00:0a.0: Signaling PME with IRQ 30
790[ 18.109431] pcieport 0000:00:0a.0: AER enabled with IRQ 30
791[ 18.110357] intel_idle: MWAIT substates: 0x1120
792[ 18.110358] intel_idle: v0.4.1 model 0x2C
793[ 18.111376] intel_idle: lapic_timer_reliable_states 0xffffffff
794[ 18.111377] version 39.2
795[ 18.113084] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
796[ 18.133944] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655 0A
797[ 18.135664] lp: driver loaded but no devices found
798[ 18.136688] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, m argin is 60 seconds).
799[ 18.137179] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
800[ 18.137427] AMD IOMMUv2 functionality not available on this system
801[ 18.146561] loop: module loaded
802[ 18.146938] VFIO - User Level meta-driver version: 0.3
803[ 18.147286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
804[ 18.147539] ehci-pci: EHCI PCI platform driver
805[ 18.148127] ehci-pci 0000:00:1a.7: EHCI Host Controller
806[ 18.148381] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus numbe r 1
807[ 18.148647] ehci-pci 0000:00:1a.7: debug port 1
808[ 18.152805] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
809[ 18.152818] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0fe000
810[ 18.160104] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
811[ 18.160654] hub 1-0:1.0: USB hub found
812[ 18.160914] hub 1-0:1.0: 4 ports detected
813[ 18.161632] ehci-pci 0000:00:1d.7: EHCI Host Controller
814[ 18.161890] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus numbe r 2
815[ 18.162188] ehci-pci 0000:00:1d.7: debug port 1
816[ 18.166354] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
817[ 18.166365] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0ff000
818[ 18.173101] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
819[ 18.173532] hub 2-0:1.0: USB hub found
820[ 18.173787] hub 2-0:1.0: 4 ports detected
821[ 18.174194] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
822[ 18.174451] ohci-pci: OHCI PCI platform driver
823[ 18.174714] uhci_hcd: USB Universal Host Controller Interface driver
824[ 18.175243] uhci_hcd 0000:00:1a.0: UHCI Host Controller
825[ 18.175498] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus numbe r 3
826[ 18.175789] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ac40
827[ 18.176276] hub 3-0:1.0: USB hub found
828[ 18.176534] hub 3-0:1.0: 2 ports detected
829[ 18.177210] uhci_hcd 0000:00:1a.1: UHCI Host Controller
830[ 18.177465] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus numbe r 4
831[ 18.177754] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ac60
832[ 18.178320] hub 4-0:1.0: USB hub found
833[ 18.178577] hub 4-0:1.0: 2 ports detected
834[ 18.179246] uhci_hcd 0000:00:1d.0: UHCI Host Controller
835[ 18.179502] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe r 5
836[ 18.179782] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ac80
837[ 18.180342] hub 5-0:1.0: USB hub found
838[ 18.180600] hub 5-0:1.0: 2 ports detected
839[ 18.181216] uhci_hcd 0000:00:1d.1: UHCI Host Controller
840[ 18.181470] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe r 6
841[ 18.181757] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000aca0
842[ 18.182336] hub 6-0:1.0: USB hub found
843[ 18.182596] hub 6-0:1.0: 2 ports detected
844[ 18.183275] uhci_hcd 0000:00:1d.2: UHCI Host Controller
845[ 18.183532] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe r 7
846[ 18.183814] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000acc0
847[ 18.184322] hub 7-0:1.0: USB hub found
848[ 18.184583] hub 7-0:1.0: 2 ports detected
849[ 18.185187] uhci_hcd 0000:00:1d.3: UHCI Host Controller
850[ 18.185444] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus numbe r 8
851[ 18.185725] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ace0
852[ 18.186535] hub 8-0:1.0: USB hub found
853[ 18.186797] hub 8-0:1.0: 2 ports detected
854[ 18.187327] xhci_hcd 0000:0a:00.0: xHCI Host Controller
855[ 18.187582] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus numbe r 9
856[ 18.187856] xhci_hcd 0000:0a:00.0: Zeroing 64bit base registers, expecting fa ult
857[ 18.209808] xhci_hcd 0000:0a:00.0: hcc params 0x014051c7 hci version 0x100 qu irks 0x0000000100000410
858[ 18.210860] hub 9-0:1.0: USB hub found
859[ 18.211135] hub 9-0:1.0: 4 ports detected
860[ 18.211515] xhci_hcd 0000:0a:00.0: xHCI Host Controller
861[ 18.211770] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus numbe r 10
862[ 18.212035] xhci_hcd 0000:0a:00.0: Host supports USB 3.0 SuperSpeed
863[ 18.213192] usb usb10: We don't know the algorithms for LPM for this host, di sabling LPM.
864[ 18.213743] hub 10-0:1.0: USB hub found
865[ 18.214017] hub 10-0:1.0: 4 ports detected
866[ 18.214451] usbcore: registered new interface driver usb-storage
867[ 18.214735] i8042: PNP: No PS/2 controller found.
868[ 18.214981] i8042: Probing ports directly.
869[ 18.218251] serio: i8042 KBD port at 0x60,0x64 irq 1
870[ 18.218537] serio: i8042 AUX port at 0x60,0x64 irq 12
871[ 18.218931] mousedev: PS/2 mouse device common for all mice
872[ 18.219305] usbcore: registered new interface driver synaptics_usb
873[ 18.219607] input: PC Speaker as /devices/platform/pcspkr/input/input1
874[ 18.219957] rtc_cmos 00:01: RTC can wake from S4
875[ 18.220387] rtc_cmos 00:01: registered as rtc0
876[ 18.220649] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
877[ 18.220927] IR NEC protocol handler initialized
878[ 18.221177] IR RC5(x/sz) protocol handler initialized
879[ 18.221422] IR RC6 protocol handler initialized
880[ 18.221666] IR JVC protocol handler initialized
881[ 18.221910] IR Sony protocol handler initialized
882[ 18.222214] IR SANYO protocol handler initialized
883[ 18.222459] IR Sharp protocol handler initialized
884[ 18.222704] IR MCE Keyboard/mouse protocol handler initialized
885[ 18.222953] IR XMP protocol handler initialized
886[ 18.223275] hidraw: raw HID events driver (C) Jiri Kosina
887[ 18.223736] usbcore: registered new interface driver usbhid
888[ 18.223990] usbhid: USB HID core driver
889[ 18.224693] xt_time: kernel timezone is -0000
890[ 18.224991] ipip: IPv4 and MPLS over IPv4 tunneling driver
891[ 18.225413] gre: GRE over IPv4 demultiplexor driver
892[ 18.225664] ip_gre: GRE over IPv4 tunneling driver
893[ 18.226230] IPv4 over IPsec tunneling driver
894[ 18.226587] Initializing XFRM netlink socket
895[ 18.227011] NET: Registered protocol family 10
896[ 18.227716] Segment Routing with IPv6
897[ 18.227990] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
898[ 18.228438] NET: Registered protocol family 17
899[ 18.228705] Bridge firewalling registered
900[ 18.228953] 8021q: 802.1Q VLAN Support v1.8
901[ 18.229299] 9pnet: Installing 9P2000 support
902[ 18.229551] Key type dns_resolver registered
903[ 18.232807] mce: Using 9 MCE banks
904[ 18.233117] microcode: sig=0x206c2, pf=0x1, revision=0x1f
905[ 18.234596] microcode: Microcode Update Driver: v2.2.
906[ 18.234612] sched_clock: Marking stable (18187698034, 46883536)->(18310405808 , -75824238)
907[ 18.238500] registered taskstats version 1
908[ 18.239112] Btrfs loaded, crc32c=crc32c-generic
909[ 18.240699] rtc_cmos 00:01: setting system clock to 2020-11-16 12:17:32 UTC ( 1605529052)
910[ 18.487088] usb 1-3: new high-speed USB device number 2 using ehci-pci
911[ 18.616406] hub 1-3:1.0: USB hub found
912[ 18.616851] hub 1-3:1.0: 4 ports detected
913[ 18.687089] usb 5-2: new full-speed USB device number 2 using uhci_hcd
914[ 18.859447] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000 :00:1d.0/usb5/5-2/5-2:1.0/0003:0624:0248.0001/input/input4
915[ 18.905070] usb 1-3.3: new high-speed USB device number 3 using ehci-pci
916[ 18.911508] hid-generic 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Key board [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
917[ 18.918414] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000 :00:1d.0/usb5/5-2/5-2:1.1/0003:0624:0248.0002/input/input5
918[ 18.919413] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mou se [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
919[ 18.997342] usb-storage 1-3.3:1.0: USB Mass Storage device detected
920[ 18.998154] scsi host0: usb-storage 1-3.3:1.0
921[ 19.101084] tsc: Refined TSC clocksource calibration: 2533.423 MHz
922[ 19.102593] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24848f48 1bd, max_idle_ns: 440795284326 ns
923[ 19.103188] clocksource: Switched to clocksource tsc
924[ 19.383087] usb 2-3: new high-speed USB device number 3 using ehci-pci
925[ 19.514281] usb-storage 2-3:1.0: USB Mass Storage device detected
926[ 19.515218] scsi host1: usb-storage 2-3:1.0
927[ 19.515923] usb-storage 2-3:1.1: USB Mass Storage device detected
928[ 19.516556] scsi host2: usb-storage 2-3:1.1
929[ 19.525186] random: fast init done
930[ 20.062440] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Snap 1.00 PQ : 0 ANSI: 6
931[ 20.063079] sd 0:0:0:0: Attached scsi generic sg0 type 0
932[ 20.064127] sd 0:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
933[ 20.065617] sd 0:0:0:0: [sda] Write Protect is off
934[ 20.065874] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
935[ 20.067128] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
936[ 20.075865] sda: sda1
937[ 20.081493] sd 0:0:0:0: [sda] Attached SCSI removable disk
938[ 20.578777] scsi 1:0:0:0: Direct-Access iDRAC LCDRIVE 0323 PQ : 0 ANSI: 0 CCS
939[ 20.579356] sd 1:0:0:0: Attached scsi generic sg1 type 0
940[ 20.580396] scsi 2:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ : 0 ANSI: 0
941[ 20.580679] sd 1:0:0:0: Power-on or device reset occurred
942[ 20.580965] scsi 2:0:0:0: Attached scsi generic sg2 type 5
943[ 20.583364] scsi 2:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ : 0 ANSI: 0 CCS
944[ 20.583928] sd 2:0:0:1: Attached scsi generic sg3 type 0
945[ 20.584618] sd 2:0:0:1: Power-on or device reset occurred
946[ 20.585316] sd 1:0:0:0: [sdb] Attached SCSI removable disk
947[ 20.588398] sd 2:0:0:1: [sdc] Attached SCSI removable disk
948[ 21.213168] floppy0: no floppy controllers found
949[ 21.216705] Freeing unused kernel image memory: 1196K
950[ 21.226073] Write protecting the kernel read-only data: 14336k
951[ 21.232531] Freeing unused kernel image memory: 2012K
952[ 21.235284] Freeing unused kernel image memory: 44K
953[ 21.237831] rodata_test: all tests were successful
954[ 21.238087] Run /init as init process
955[ 21.344781] random: udevd: uninitialized urandom read (16 bytes read)
956[ 21.345102] random: udevd: uninitialized urandom read (16 bytes read)
957[ 21.345363] random: udevd: uninitialized urandom read (16 bytes read)
958[ 21.347574] udevd[1568]: starting eudev-3.2.5
959[ 22.846550] random: crng init done
960[ 22.846810] random: 7 urandom warning(s) missed due to ratelimiting
961[ 24.747504] IPMI System Interface driver.
962[ 24.747789] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
963[ 24.748058] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
964[ 24.748321] ipmi_si: Adding SMBIOS-specified kcs state machine
965[ 24.748654] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
966[ 24.771965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut6
967[ 24.772344] ACPI: Power Button [PWRF]
968[ 24.830137] megasas: 07.706.03.00-rc1
969[ 24.830886] megaraid_sas 0000:02:00.0: FW now in Ready state
970[ 24.831177] megaraid_sas 0000:02:00.0: 32 bit DMA mask and 32 bit consistent mask
971[ 24.831868] megaraid_sas 0000:02:00.0: firmware supports msix : (0)
972[ 24.832142] megaraid_sas 0000:02:00.0: current msix/online cpus : (1/24)
973[ 24.832403] megaraid_sas 0000:02:00.0: RDPQ mode : (disabled)
974[ 24.854014] ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
975[ 24.873989] ACPI Error: No handler for Region [IPMI] (0000000089faf084) [IPMI ] (20180810/evregion-127)
976[ 24.874528] ACPI Error: Region IPMI (ID=7) has no handler (20180810/exfldio-2 61)
977[ 24.874791] ACPI Error: Method parse/execution failed \_SB.PMI0._GHL, AE_NOT_ EXIST (20180810/psparse-514)
978[ 24.875273] ACPI Error: Method parse/execution failed \_SB.PMI0._PMC, AE_NOT_ EXIST (20180810/psparse-514)
979[ 24.875742] ACPI Error: AE_NOT_EXIST, Evaluating _PMC (20180810/power_meter-7 56)
980[ 24.887427] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
981[ 24.887944] EDAC PCI0: Giving out device to module i7core_edac controller EDA C PCI controller: DEV 0000:fe:03.0 (POLLED)
982[ 24.888572] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
983[ 24.889085] EDAC PCI1: Giving out device to module i7core_edac controller EDA C PCI controller: DEV 0000:ff:03.0 (POLLED)
984[ 24.889580] EDAC i7core: Driver loaded, 2 memory controller(s) found.
985[ 24.911288] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
986[ 24.916547] libphy: r8169: probed
987[ 24.917124] r8169 0000:05:00.0 eth0: RTL8168g/8111g, 68:1c:a2:13:48:99, XID 4 c000800, IRQ 47
988[ 24.917387] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
989[ 24.917900] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
990[ 24.921073] megaraid_sas 0000:02:00.0: controller type : MR(1024MB)
991[ 24.921332] megaraid_sas 0000:02:00.0: Online Controller Reset(OCR) : Enable d
992[ 24.921590] megaraid_sas 0000:02:00.0: Secure JBOD support : No
993[ 24.921845] megaraid_sas 0000:02:00.0: NVMe passthru support : No
994[ 24.922109] megaraid_sas 0000:02:00.0: FW provided TM TaskAbort/Reset timeout : 0 secs/0 secs
995[ 24.922583] megaraid_sas 0000:02:00.0: megasas_init_mfi: fw_support_ieee=6710 8864
996[ 24.922863] megaraid_sas 0000:02:00.0: INIT adapter done
997[ 24.923145] megaraid_sas 0000:02:00.0: Jbod map is not supported megasas_setu p_jbod_map 5154
998[ 24.924283] libphy: r8169: probed
999[ 24.924931] r8169 0000:06:00.0 eth1: RTL8168g/8111g, 68:1c:a2:13:48:9a, XID 4 c000800, IRQ 49
1000[ 24.925257] r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1001[ 24.925750] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
1002[ 24.930324] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
1003[ 24.931178] libphy: r8169: probed
1004[ 24.931714] r8169 0000:07:00.0 eth2: RTL8168g/8111g, 68:1c:a2:13:48:9b, XID 4 c000800, IRQ 51
1005[ 24.931978] r8169 0000:07:00.0 eth2: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1006[ 24.932508] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
1007[ 24.938358] libphy: r8169: probed
1008[ 24.938892] r8169 0000:08:00.0 eth3: RTL8168g/8111g, 68:1c:a2:13:48:9c, XID 4 c000800, IRQ 53
1009[ 24.939157] r8169 0000:08:00.0 eth3: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1010[ 24.945062] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 201 4)
1011[ 24.946226] bnx2 0000:01:00.0 eth4: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 54, node addr d4:ae:52:65:88:81
1012[ 24.947546] bnx2 0000:01:00.1 eth5: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 55, node addr d4:ae:52:65:88:82
1013[ 24.968066] megaraid_sas 0000:02:00.0: pci id : (0x1000)/(0x00 79)/(0x1028)/(0x1f17)
1014[ 24.968346] megaraid_sas 0000:02:00.0: unevenspan support : no
1015[ 24.968611] megaraid_sas 0000:02:00.0: firmware crash dump : no
1016[ 24.968872] megaraid_sas 0000:02:00.0: jbod sync map : no
1017[ 24.969134] scsi host3: Avago SAS based MegaRAID driver
1018[ 24.980021] sr 2:0:0:0: Power-on or device reset occurred
1019[ 25.012311] scsi 3:2:0:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1020[ 25.013086] sd 3:2:0:0: Attached scsi generic sg4 type 0
1021[ 25.013231] sd 3:2:0:0: [sdd] 1952448512 512-byte logical blocks: (1000 GB/93 1 GiB)
1022[ 25.013666] sd 3:2:0:0: [sdd] Write Protect is off
1023[ 25.013927] sd 3:2:0:0: [sdd] Mode Sense: 1f 00 00 08
1024[ 25.014041] sd 3:2:0:0: [sdd] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1025[ 25.014270] scsi 3:2:1:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1026[ 25.015536] sd 3:2:1:0: Attached scsi generic sg5 type 0
1027[ 25.016327] IPMI SSIF Interface driver
1028[ 25.016384] scsi 3:2:2:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1029[ 25.016428] sd 3:2:1:0: [sde] 15626928128 512-byte logical blocks: (8.00 TB/7 .28 TiB)
1030[ 25.016464] sd 3:2:1:0: [sde] Write Protect is off
1031[ 25.016466] sd 3:2:1:0: [sde] Mode Sense: 1f 00 10 08
1032[ 25.016579] sd 3:2:1:0: [sde] Write cache: disabled, read cache: disabled, su pports DPO and FUA
1033[ 25.017651] sdd: sdd1
1034[ 25.018377] sd 3:2:2:0: Attached scsi generic sg6 type 0
1035[ 25.018558] sd 3:2:2:0: [sdf] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1036[ 25.018929] sd 3:2:2:0: [sdf] Write Protect is off
1037[ 25.019052] scsi 3:2:3:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1038[ 25.019192] sd 3:2:2:0: [sdf] Mode Sense: 1f 00 00 08
1039[ 25.019355] sd 3:2:0:0: [sdd] Attached SCSI disk
1040[ 25.019726] sd 3:2:3:0: [sdg] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1041[ 25.019780] sd 3:2:3:0: Attached scsi generic sg7 type 0
1042[ 25.019858] sd 3:2:2:0: [sdf] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1043[ 25.020028] sd 3:2:3:0: [sdg] Write Protect is off
1044[ 25.020842] scsi 3:2:4:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1045[ 25.021099] sd 3:2:3:0: [sdg] Mode Sense: 1f 00 00 08
1046[ 25.021508] sd 3:2:3:0: [sdg] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1047[ 25.021792] sd 3:2:4:0: Attached scsi generic sg8 type 0
1048[ 25.021843] sd 3:2:4:0: [sdh] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1049[ 25.021876] sd 3:2:4:0: [sdh] Write Protect is off
1050[ 25.021878] sd 3:2:4:0: [sdh] Mode Sense: 1f 00 00 08
1051[ 25.021939] sd 3:2:4:0: [sdh] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1052[ 25.023790] scsi 3:2:5:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1053[ 25.024502] sd 3:2:5:0: Attached scsi generic sg9 type 0
1054[ 25.024532] sd 3:2:5:0: [sdi] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1055[ 25.025158] sd 3:2:5:0: [sdi] Write Protect is off
1056[ 25.025306] scsi 3:2:6:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1057[ 25.025416] sd 3:2:5:0: [sdi] Mode Sense: 1f 00 00 08
1058[ 25.025795] sd 3:2:5:0: [sdi] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1059[ 25.026012] sd 3:2:6:0: [sdj] 285474816 512-byte logical blocks: (146 GB/136 GiB)
1060[ 25.026014] sd 3:2:6:0: Attached scsi generic sg10 type 0
1061[ 25.026515] scsi 3:2:7:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1062[ 25.026605] sd 3:2:6:0: [sdj] Write Protect is off
1063[ 25.027209] sd 3:2:7:0: Attached scsi generic sg11 type 0
1064[ 25.027287] sd 3:2:7:0: [sdk] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1065[ 25.027314] sd 3:2:7:0: [sdk] Write Protect is off
1066[ 25.027316] sd 3:2:7:0: [sdk] Mode Sense: 1f 00 00 08
1067[ 25.027355] sd 3:2:7:0: [sdk] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1068[ 25.027424] sd 3:2:6:0: [sdj] Mode Sense: 1f 00 00 08
1069[ 25.028069] scsi 3:2:8:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1070[ 25.028291] sd 3:2:6:0: [sdj] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1071[ 25.028946] sd 3:2:8:0: Attached scsi generic sg12 type 0
1072[ 25.029088] sd 3:2:8:0: [sdl] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1073[ 25.030049] scsi 3:2:9:0: Direct-Access DELL PERC H700 2.10 PQ : 0 ANSI: 5
1074[ 25.030145] sd 3:2:8:0: [sdl] Write Protect is off
1075[ 25.030629] sd 3:2:8:0: [sdl] Mode Sense: 1f 00 00 08
1076[ 25.030677] sd 3:2:8:0: [sdl] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1077[ 25.030718] sd 3:2:9:0: Attached scsi generic sg13 type 0
1078[ 25.030743] sd 3:2:9:0: [sdm] 23436722176 512-byte logical blocks: (12.0 TB/1 0.9 TiB)
1079[ 25.030772] sd 3:2:9:0: [sdm] Write Protect is off
1080[ 25.030774] sd 3:2:9:0: [sdm] Mode Sense: 1f 00 00 08
1081[ 25.030826] sd 3:2:9:0: [sdm] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
1082[ 25.032850] cryptd: max_cpu_qlen set to 1000
1083[ 25.032930] scsi 3:2:10:0: Direct-Access DELL PERC H700 2.10 P Q: 0 ANSI: 5
1084[ 25.033942] sd 3:2:10:0: Attached scsi generic sg14 type 0
1085[ 25.034286] sd 3:2:10:0: [sdn] 23436722176 512-byte logical blocks: (12.0 TB/ 10.9 TiB)
1086[ 25.034626] sd 3:2:10:0: [sdn] Write Protect is off
1087[ 25.034919] sd 3:2:10:0: [sdn] Mode Sense: 1f 00 00 08
1088[ 25.035193] sd 3:2:10:0: [sdn] Write cache: enabled, read cache: enabled, doe sn't support DPO or FUA
1089[ 25.035207] sdj: sdj1
1090[ 25.035224] scsi 3:2:11:0: Direct-Access DELL PERC H700 2.10 P Q: 0 ANSI: 5
1091[ 25.035927] sd 3:2:11:0: Attached scsi generic sg15 type 0
1092[ 25.036126] sd 3:2:11:0: [sdo] 23436722176 512-byte logical blocks: (12.0 TB/ 10.9 TiB)
1093[ 25.036565] sd 3:2:6:0: [sdj] Attached SCSI disk
1094[ 25.036615] scsi 3:2:12:0: Direct-Access DELL PERC H700 2.10 P Q: 0 ANSI: 5
1095[ 25.036812] sd 3:2:11:0: [sdo] Write Protect is off
1096[ 25.036869] sd 3:2:12:0: Attached scsi generic sg16 type 0
1097[ 25.037166] sd 3:2:12:0: [sdp] 23436722176 512-byte logical blocks: (12.0 TB/ 10.9 TiB)
1098[ 25.037237] scsi 3:2:13:0: Direct-Access DELL PERC H700 2.10 P Q: 0 ANSI: 5
1099[ 25.037347] sd 3:2:11:0: [sdo] Mode Sense: 1f 00 00 08
1100[ 25.037547] sd 3:2:13:0: Attached scsi generic sg17 type 0
1101[ 25.037584] sd 3:2:13:0: [sdq] 23436722176 512-byte logical blocks: (12.0 TB/ 10.9 TiB)
1102[ 25.037609] sd 3:2:13:0: [sdq] Write Protect is off
1103[ 25.037611] sd 3:2:13:0: [sdq] Mode Sense: 1f 00 00 08
1104[ 25.037642] sd 3:2:12:0: [sdp] Write Protect is off
1105[ 25.037732] sd 3:2:13:0: [sdq] Write cache: enabled, read cache: enabled, doe sn't support DPO or FUA
1106[ 25.038062] sd 3:2:11:0: [sdo] Write cache: enabled, read cache: enabled, doe sn't support DPO or FUA
1107[ 25.038170] sd 3:2:12:0: [sdp] Mode Sense: 1f 00 00 08
1108[ 25.044151] sdf: sdf1
1109[ 25.045982] sd 3:2:12:0: [sdp] Write cache: enabled, read cache: enabled, doe sn't support DPO or FUA
1110[ 25.046903] sd 3:2:2:0: [sdf] Attached SCSI disk
1111[ 25.048633] sde: sde1
1112[ 25.049708] sd 3:2:1:0: [sde] Attached SCSI disk
1113[ 25.050464] sdh: sdh1
1114[ 25.051357] sd 3:2:4:0: [sdh] Attached SCSI disk
1115[ 25.051554] sdg: sdg1
1116[ 25.052634] sd 3:2:3:0: [sdg] Attached SCSI disk
1117[ 25.054646] SSE version of gcm_enc/dec engaged.
1118[ 25.059822] sdi: sdi1
1119[ 25.060098] sdo: sdo1
1120[ 25.060970] sd 3:2:5:0: [sdi] Attached SCSI disk
1121[ 25.061031] sd 3:2:11:0: [sdo] Attached SCSI disk
1122[ 25.064449] sdm: sdm1
1123[ 25.065926] sd 3:2:9:0: [sdm] Attached SCSI disk
1124[ 25.066170] sdk: sdk1
1125[ 25.067513] sd 3:2:7:0: [sdk] Attached SCSI disk
1126[ 25.069460] sdl: sdl1
1127[ 25.069542] sdn: sdn1
1128[ 25.071258] sd 3:2:10:0: [sdn] Attached SCSI disk
1129[ 25.071884] sd 3:2:8:0: [sdl] Attached SCSI disk
1130[ 25.073391] sdq: sdq1
1131[ 25.076519] sd 3:2:13:0: [sdq] Attached SCSI disk
1132[ 25.084077] sdp: sdp1
1133[ 25.084942] sd 3:2:12:0: [sdp] Attached SCSI disk
1134[ 25.086736] sr 2:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw caddy
1135[ 25.086992] cdrom: Uniform CD-ROM driver Revision: 3.20
1136[ 25.087672] sr 2:0:0:0: Attached scsi CD-ROM sr0
1137[ 25.151475] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. U sing workaround
1138[ 29.310338] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
1139[ 29.315554] libphy: r8169: probed
1140[ 29.315920] r8169 0000:05:00.0 eth0: RTL8168g/8111g, 68:1c:a2:13:48:99, XID 4 c000800, IRQ 47
1141[ 29.315923] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1142[ 29.315967] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
1143[ 29.316807] r8169 0000:05:00.0 eth114: renamed from eth0
1144[ 29.322613] libphy: r8169: probed
1145[ 29.326261] r8169 0000:05:00.0 eth2: renamed from eth114
1146[ 29.334536] r8169 0000:06:00.0 eth0: RTL8168g/8111g, 68:1c:a2:13:48:9a, XID 4 c000800, IRQ 49
1147[ 29.334539] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1148[ 29.334582] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
1149[ 29.335421] r8169 0000:06:00.0 eth113: renamed from eth0
1150[ 29.339486] libphy: r8169: probed
1151[ 29.346249] r8169 0000:06:00.0 eth3: renamed from eth113
1152[ 29.356520] r8169 0000:07:00.0 eth0: RTL8168g/8111g, 68:1c:a2:13:48:9b, XID 4 c000800, IRQ 51
1153[ 29.356524] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1154[ 29.356568] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
1155[ 29.357390] r8169 0000:07:00.0 eth112: renamed from eth0
1156[ 29.361647] libphy: r8169: probed
1157[ 29.366232] r8169 0000:07:00.0 eth4: renamed from eth112
1158[ 29.374503] r8169 0000:08:00.0 eth0: RTL8168g/8111g, 68:1c:a2:13:48:9c, XID 4 c000800, IRQ 53
1159[ 29.374506] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
1160[ 29.375381] r8169 0000:08:00.0 eth111: renamed from eth0
1161[ 29.382210] r8169 0000:08:00.0 eth5: renamed from eth111
1162[ 29.395450] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 201 4)
1163[ 29.396084] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 54, node addr d4:ae:52:65:88:81
1164[ 29.396710] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 55, node addr d4:ae:52:65:88:82
1165[ 29.826998] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
1166[ 29.827052] In ALB mode you might experience client disconnections upon recon nection of a link if the bonding module updelay parameter (0 msec) is incompatib le with the forwarding delay time of the switch
1167[ 29.827054] MII link monitoring set to 100 ms
1168[ 29.832787] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
1169[ 29.832790] 8021q: adding VLAN 0 to HW filter on device bond0
1170[ 29.902367] bnx2 0000:01:00.0 eth0: using MSIX
1171[ 29.902595] bond0: Enslaving eth0 as an active interface with a down link
1172[ 32.145578] device bond0 entered promiscuous mode
1173[ 32.145597] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
1174[ 32.145598] 8021q: adding VLAN 0 to HW filter on device bond0
1175[ 32.145620] br0: port 1(bond0) entered blocking state
1176[ 32.145621] br0: port 1(bond0) entered disabled state
1177[ 32.160666] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready
1178[ 32.160674] 8021q: adding VLAN 0 to HW filter on device bond1
1179[ 32.212310] bnx2 0000:01:00.1 eth1: using MSIX
1180[ 32.212445] bond1: Enslaving eth1 as an active interface with a down link
1181[ 32.987078] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full dup lex
1182[ 33.085123] bond0: link status definitely up for interface eth0, 1000 Mbps fu ll duplex
1183[ 33.085127] bond0: making interface eth0 the new active one
1184[ 33.085128] device eth0 entered promiscuous mode
1185[ 33.085238] bond0: first active interface up!
1186[ 33.085249] br0: port 1(bond0) entered blocking state
1187[ 33.085251] br0: port 1(bond0) entered forwarding state
1188[ 34.428917] IPv6: ADDRCONF(NETDEV_UP): bond2: link is not ready
1189[ 34.428919] 8021q: adding VLAN 0 to HW filter on device bond2
1190[ 34.443760] Generic PHY r8169-500:00: attached PHY driver [Generic PHY] (mii_ bus:phy_addr=r8169-500:00, irq=IGNORE)
1191[ 34.555731] bond2: Enslaving eth2 as an active interface with a down link
1192[ 35.336407] bnx2 0000:01:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full dup lex
1193[ 35.381113] bond1: link status definitely up for interface eth1, 1000 Mbps fu ll duplex
1194[ 35.381116] bond1: making interface eth1 the new active one
1195[ 35.381213] bond1: first active interface up!
1196[ 36.772439] IPv6: ADDRCONF(NETDEV_UP): bond3: link is not ready
1197[ 36.772441] 8021q: adding VLAN 0 to HW filter on device bond3
1198[ 36.775610] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] (mii_ bus:phy_addr=r8169-600:00, irq=IGNORE)
1199[ 36.887728] bond3: Enslaving eth3 as an active interface with a down link
1200[ 39.104554] IPv6: ADDRCONF(NETDEV_UP): bond4: link is not ready
1201[ 39.104556] 8021q: adding VLAN 0 to HW filter on device bond4
1202[ 39.107406] Generic PHY r8169-700:00: attached PHY driver [Generic PHY] (mii_ bus:phy_addr=r8169-700:00, irq=IGNORE)
1203[ 39.219686] bond4: Enslaving eth4 as a backup interface with a down link
1204[ 41.437893] device bond4 entered promiscuous mode
1205[ 41.437983] IPv6: ADDRCONF(NETDEV_UP): bond4: link is not ready
1206[ 41.437984] 8021q: adding VLAN 0 to HW filter on device bond4
1207[ 41.438062] br4: port 1(bond4) entered blocking state
1208[ 41.438064] br4: port 1(bond4) entered disabled state
1209[ 41.453130] IPv6: ADDRCONF(NETDEV_UP): bond5: link is not ready
1210[ 41.453132] 8021q: adding VLAN 0 to HW filter on device bond5
1211[ 41.456297] Generic PHY r8169-800:00: attached PHY driver [Generic PHY] (mii_ bus:phy_addr=r8169-800:00, irq=IGNORE)
1212[ 41.568722] bond5: Enslaving eth5 as a backup interface with a down link
1213[ 43.786909] device bond5 entered promiscuous mode
1214[ 43.787010] IPv6: ADDRCONF(NETDEV_UP): bond5: link is not ready
1215[ 43.787013] 8021q: adding VLAN 0 to HW filter on device bond5
1216[ 43.787040] br5: port 1(bond5) entered blocking state
1217[ 43.787041] br5: port 1(bond5) entered disabled state
1218[ 76.373873] md: unRAID driver 2.9.13 installed
1219[ 76.445300] mdcmd (1): import 0 sdi 64 11718361036 0 PERC_H700_00bb82f509d3db 552600c1607720e54a_36d4ae5207760c1002655dbd309f582bb
1220[ 76.445472] md: import disk0: (sdi) PERC_H700_00bb82f509d3db552600c1607720e54 a_36d4ae5207760c1002655dbd309f582bb size: 11718361036
1221[ 76.445956] mdcmd (2): import 1 sdf 64 11718361036 0 PERC_H700_00f3389107abdb 552600c1607720e54a_36d4ae5207760c1002655dbab079138f3
1222[ 76.446196] md: import disk1: (sdf) PERC_H700_00f3389107abdb552600c1607720e54 a_36d4ae5207760c1002655dbab079138f3 size: 11718361036
1223[ 76.446737] mdcmd (3): import 2 sdh 64 11718361036 0 PERC_H700_0026b84d09c8db 552600c1607720e54a_36d4ae5207760c1002655dbc8094db826
1224[ 76.446889] md: import disk2: (sdh) PERC_H700_0026b84d09c8db552600c1607720e54 a_36d4ae5207760c1002655dbc8094db826 size: 11718361036
1225[ 76.463164] mdcmd (4): import 3 sdg 64 11718361036 0 PERC_H700_0076609508bcdb 552600c1607720e54a_36d4ae5207760c1002655dbbc08956076
1226[ 76.463339] md: import disk3: (sdg) PERC_H700_0076609508bcdb552600c1607720e54 a_36d4ae5207760c1002655dbbc08956076 size: 11718361036
1227[ 76.474050] mdcmd (5): import 4 sde 64 7813464012 0 PERC_H700_00fb472e0553000 0ff00c1607720e54a_36d4ae5207760c100ff000053052e47fb
1228[ 76.474205] md: import disk4: (sde) PERC_H700_00fb472e05530000ff00c1607720e54 a_36d4ae5207760c100ff000053052e47fb size: 7813464012
1229[ 76.486471] mdcmd (6): import 5 sdm 64 11718361036 0 PERC_H700_00a23a5f1c88a7 652600c1607720e54a_36d4ae5207760c1002665a7881c5f3aa2
1230[ 76.486648] md: import disk5: (sdm) PERC_H700_00a23a5f1c88a7652600c1607720e54 a_36d4ae5207760c1002665a7881c5f3aa2 size: 11718361036
1231[ 76.487198] mdcmd (7): import 6 sdn 64 11718361036 0 PERC_H700_00aad3201d94a7 652600c1607720e54a_36d4ae5207760c1002665a7941d20d3aa
1232[ 76.487434] md: import disk6: (sdn) PERC_H700_00aad3201d94a7652600c1607720e54 a_36d4ae5207760c1002665a7941d20d3aa size: 11718361036
1233[ 76.487931] mdcmd (8): import 7 sdl 64 11718361036 0 PERC_H700_001a59881b7aa7 652600c1607720e54a_36d4ae5207760c1002665a77a1b88591a
1234[ 76.488358] md: import disk7: (sdl) PERC_H700_001a59881b7aa7652600c1607720e54 a_36d4ae5207760c1002665a77a1b88591a size: 11718361036
1235[ 76.940920] mdcmd (9): import 8 sdp 64 11718361036 0 PERC_H700_00cd4516099400 00ff00c1607720e54a_36d4ae5207760c100ff000094091645cd
1236[ 76.941123] md: import disk8: (sdp) PERC_H700_00cd451609940000ff00c1607720e54 a_36d4ae5207760c100ff000094091645cd size: 11718361036
1237[ 76.941733] mdcmd (10): import 9 sdk 64 11718361036 0 PERC_H700_002fdb681a67a 7652600c1607720e54a_36d4ae5207760c1002665a7671a68db2f
1238[ 76.941917] md: import disk9: (sdk) PERC_H700_002fdb681a67a7652600c1607720e54 a_36d4ae5207760c1002665a7671a68db2f size: 11718361036
1239[ 76.962930] mdcmd (11): import 10 sdq 64 11718361036 0 PERC_H700_002153381fb7 a7652600c1607720e54a_36d4ae5207760c1002665a7b71f385321
1240[ 76.963191] md: import disk10: (sdq) PERC_H700_002153381fb7a7652600c1607720e5 4a_36d4ae5207760c1002665a7b71f385321 size: 11718361036
1241[ 76.963600] mdcmd (12): import 11 sdj 64 142737376 0 PERC_H700_0096a71510ebed b62600c1607720e54a_36d4ae5207760c10026b6edeb1015a796
1242[ 76.963797] md: import disk11: (sdj) PERC_H700_0096a71510ebedb62600c1607720e5 4a_36d4ae5207760c10026b6edeb1015a796 size: 142737376
1243[ 76.963831] mdcmd (13): import 12
1244[ 76.963854] mdcmd (14): import 13
1245[ 76.963872] mdcmd (15): import 14
1246[ 76.963888] mdcmd (16): import 15
1247[ 76.963903] mdcmd (17): import 16
1248[ 76.963919] mdcmd (18): import 17
1249[ 76.963936] mdcmd (19): import 18
1250[ 76.963951] mdcmd (20): import 19
1251[ 76.963961] mdcmd (21): import 20
1252[ 76.963983] mdcmd (22): import 21
1253[ 76.963993] mdcmd (23): import 22
1254[ 76.964003] mdcmd (24): import 23
1255[ 76.964013] mdcmd (25): import 24
1256[ 76.964024] mdcmd (26): import 25
1257[ 76.964034] mdcmd (27): import 26
1258[ 76.964044] mdcmd (28): import 27
1259[ 76.964054] mdcmd (29): import 28
1260[ 76.971300] mdcmd (30): import 29 sdo 64 11718361036 0 PERC_H700_00491dc61d9f a7652600c1607720e54a_36d4ae5207760c1002665a79f1dc61d49
1261[ 76.971551] md: import disk29: (sdo) PERC_H700_00491dc61d9fa7652600c1607720e5 4a_36d4ae5207760c1002665a79f1dc61d49 size: 11718361036
1262[ 79.470898] RPC: Registered named UNIX socket transport module.
1263[ 79.470900] RPC: Registered udp transport module.
1264[ 79.470901] RPC: Registered tcp transport module.
1265[ 79.470902] RPC: Registered tcp NFSv4.1 backchannel transport module.
1266[ 79.546918] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
1267[ 81.735278] mdcmd (31): set md_num_stripes 1280
1268[ 81.735291] mdcmd (32): set md_queue_limit 80
1269[ 81.735298] mdcmd (33): set md_sync_limit 5
1270[ 81.735306] mdcmd (34): set md_write_method 1
1271[ 81.735334] mdcmd (35): set spinup_group 0 0
1272[ 81.735360] mdcmd (36): set spinup_group 1 0
1273[ 81.735386] mdcmd (37): set spinup_group 2 0
1274[ 81.735411] mdcmd (38): set spinup_group 3 0
1275[ 81.735436] mdcmd (39): set spinup_group 4 0
1276[ 81.735461] mdcmd (40): set spinup_group 5 0
1277[ 81.735486] mdcmd (41): set spinup_group 6 0
1278[ 81.735510] mdcmd (42): set spinup_group 7 0
1279[ 81.735535] mdcmd (43): set spinup_group 8 0
1280[ 81.735561] mdcmd (44): set spinup_group 9 0
1281[ 81.735585] mdcmd (45): set spinup_group 10 0
1282[ 81.735610] mdcmd (46): set spinup_group 11 0
1283[ 81.735645] mdcmd (47): set spinup_group 29 0
1284[ 81.735698] mdcmd (48): start STOPPED
1285[ 81.738249] unraid: allocating 66950K for 1280 stripes (13 disks)
1286[ 81.754778] md1: running, size: 11718361036 blocks
1287[ 81.754982] md2: running, size: 11718361036 blocks
1288[ 81.755276] md3: running, size: 11718361036 blocks
1289[ 81.755575] md4: running, size: 7813464012 blocks
1290[ 81.755917] md5: running, size: 11718361036 blocks
1291[ 81.756247] md6: running, size: 11718361036 blocks
1292[ 81.756542] md7: running, size: 11718361036 blocks
1293[ 81.756857] md8: running, size: 11718361036 blocks
1294[ 81.757248] md9: running, size: 11718361036 blocks
1295[ 81.757520] md10: running, size: 11718361036 blocks
1296[ 81.757776] md11: running, size: 142737376 blocks
1297[ 86.770746] SGI XFS with ACLs, security attributes, no debug enabled
1298[ 86.774757] XFS (md1): Mounting V5 Filesystem
1299[ 87.508597] XFS (md1): Ending clean mount
1300[ 87.823152] XFS (md2): Mounting V5 Filesystem
1301[ 88.538489] XFS (md2): Ending clean mount
1302[ 88.674751] XFS (md3): Mounting V5 Filesystem
1303[ 89.975584] XFS (md3): Ending clean mount
1304[ 91.066589] XFS (md4): Mounting V5 Filesystem
1305[ 92.625783] XFS (md4): Ending clean mount
1306[ 93.143454] XFS (md5): Mounting V5 Filesystem
1307[ 95.096928] XFS (md5): Ending clean mount
1308[ 96.106269] XFS (md6): Mounting V5 Filesystem
1309[ 97.518827] XFS (md6): Ending clean mount
1310[ 98.541866] XFS (md7): Mounting V5 Filesystem
1311[ 99.242783] XFS (md7): Ending clean mount
1312[ 99.407326] XFS (md8): Mounting V5 Filesystem
1313[ 101.200964] XFS (md8): Ending clean mount
1314[ 101.978980] XFS (md9): Mounting V5 Filesystem
1315[ 102.685861] XFS (md9): Ending clean mount
1316[ 102.828431] XFS (md10): Mounting V5 Filesystem
1317[ 104.143990] XFS (md10): Ending clean mount
1318[ 105.217717] XFS (md11): Mounting V5 Filesystem
1319[ 106.019354] XFS (md11): Ending clean mount
1320[ 106.113987] XFS (sdd1): Mounting V5 Filesystem
1321[ 106.140715] XFS (sdd1): Ending clean mount
1322[ 107.741684] mdcmd (49): set md_write_method 0
1323
1324[ 111.366787] BTRFS: device fsid 4ac07a6a-bf51-48fd-b23d-409566e8bb4a devid 1 t ransid 280217 /dev/loop2
1325[ 111.368090] BTRFS info (device loop2): disk space caching is enabled
1326[ 111.368093] BTRFS info (device loop2): has skinny extents
1327[ 111.491571] BTRFS info (device loop2): new size for /dev/loop2 is 80530636800
1328[ 113.434796] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
1329[ 115.027770] docker0: port 1(vethd491eac) entered blocking state
1330[ 115.027772] docker0: port 1(vethd491eac) entered disabled state
1331[ 115.027832] device vethd491eac entered promiscuous mode
1332[ 115.027923] IPv6: ADDRCONF(NETDEV_UP): vethd491eac: link is not ready
1333[ 115.054319] BTRFS: device fsid c91b48cb-8ebc-44f7-832a-13e6eced4c09 devid 1 t ransid 115 /dev/loop3
1334[ 115.071166] BTRFS info (device loop3): disk space caching is enabled
1335[ 115.071168] BTRFS info (device loop3): has skinny extents
1336[ 115.293095] BTRFS info (device loop3): new size for /dev/loop3 is 1073741824
1337[ 115.530026] tun: Universal TUN/TAP device driver, 1.6
1338[ 115.656893] virbr0: port 1(virbr0-nic) entered blocking state
1339[ 115.656895] virbr0: port 1(virbr0-nic) entered disabled state
1340[ 115.656962] device virbr0-nic entered promiscuous mode
1341[ 115.762441] eth0: renamed from vethd872a5b
1342[ 115.773736] IPv6: ADDRCONF(NETDEV_CHANGE): vethd491eac: link becomes ready
1343[ 115.773773] docker0: port 1(vethd491eac) entered blocking state
1344[ 115.773775] docker0: port 1(vethd491eac) entered forwarding state
1345[ 115.773829] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
1346[ 116.050187] virbr0: port 1(virbr0-nic) entered blocking state
1347[ 116.050190] virbr0: port 1(virbr0-nic) entered listening state
1348[ 116.106402] virbr0: port 1(virbr0-nic) entered disabled state
1349[ 116.145656] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018 -3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html f or details.
1350[ 116.271276] docker0: port 2(vethf6100a6) entered blocking state
1351[ 116.271279] docker0: port 2(vethf6100a6) entered disabled state
1352[ 116.271393] device vethf6100a6 entered promiscuous mode
1353[ 116.271485] IPv6: ADDRCONF(NETDEV_UP): vethf6100a6: link is not ready
1354[ 116.271487] docker0: port 2(vethf6100a6) entered blocking state
1355[ 116.271489] docker0: port 2(vethf6100a6) entered forwarding state
1356[ 116.966493] eth0: renamed from vethd40ef6c
1357[ 116.977805] IPv6: ADDRCONF(NETDEV_CHANGE): vethf6100a6: link becomes ready
1358[ 117.612852] br0: port 2(vnet0) entered blocking state
1359[ 117.612856] br0: port 2(vnet0) entered disabled state
1360[ 117.612938] device vnet0 entered promiscuous mode
1361[ 117.613222] br0: port 2(vnet0) entered blocking state
1362[ 117.613225] br0: port 2(vnet0) entered forwarding state
1363[ 117.613783] br5: port 2(vnet1) entered blocking state
1364[ 117.613786] br5: port 2(vnet1) entered disabled state
1365[ 117.613868] device vnet1 entered promiscuous mode
1366[ 117.614040] br5: port 2(vnet1) entered blocking state
1367[ 117.614042] br5: port 2(vnet1) entered forwarding state
1368[ 117.696938] docker0: port 3(veth24e7537) entered blocking state
1369[ 117.696941] docker0: port 3(veth24e7537) entered disabled state
1370[ 117.697015] device veth24e7537 entered promiscuous mode
1371[ 117.697476] IPv6: ADDRCONF(NETDEV_UP): veth24e7537: link is not ready
1372[ 117.697479] docker0: port 3(veth24e7537) entered blocking state
1373[ 117.697480] docker0: port 3(veth24e7537) entered forwarding state
1374[ 118.040608] docker0: port 3(veth24e7537) entered disabled state
1375[ 118.884320] br0: port 3(vnet2) entered blocking state
1376[ 118.884323] br0: port 3(vnet2) entered disabled state
1377[ 118.884413] device vnet2 entered promiscuous mode
1378[ 118.884615] br0: port 3(vnet2) entered blocking state
1379[ 118.884617] br0: port 3(vnet2) entered forwarding state
1380[ 119.119561] eth0: renamed from veth839e894
1381[ 119.126669] IPv6: ADDRCONF(NETDEV_CHANGE): veth24e7537: link becomes ready
1382[ 119.126715] docker0: port 3(veth24e7537) entered blocking state
1383[ 119.126716] docker0: port 3(veth24e7537) entered forwarding state
1384[ 119.742017] docker0: port 4(vethb714199) entered blocking state
1385[ 119.742019] docker0: port 4(vethb714199) entered disabled state
1386[ 119.742085] device vethb714199 entered promiscuous mode
1387[ 119.742163] IPv6: ADDRCONF(NETDEV_UP): vethb714199: link is not ready
1388[ 119.742165] docker0: port 4(vethb714199) entered blocking state
1389[ 119.742166] docker0: port 4(vethb714199) entered forwarding state
1390[ 120.128091] docker0: port 4(vethb714199) entered disabled state
1391[ 121.181380] eth0: renamed from vethe5d9b88
1392[ 121.194701] IPv6: ADDRCONF(NETDEV_CHANGE): vethb714199: link becomes ready
1393[ 121.194749] docker0: port 4(vethb714199) entered blocking state
1394[ 121.194750] docker0: port 4(vethb714199) entered forwarding state
1395[ 122.268025] docker0: port 5(veth1769ced) entered blocking state
1396[ 122.268028] docker0: port 5(veth1769ced) entered disabled state
1397[ 122.268100] device veth1769ced entered promiscuous mode
1398[ 122.268185] IPv6: ADDRCONF(NETDEV_UP): veth1769ced: link is not ready
1399[ 122.268187] docker0: port 5(veth1769ced) entered blocking state
1400[ 122.268188] docker0: port 5(veth1769ced) entered forwarding state
1401[ 122.268668] docker0: port 5(veth1769ced) entered disabled state
1402[ 124.574527] eth0: renamed from vethc40fcb1
1403[ 124.582719] IPv6: ADDRCONF(NETDEV_CHANGE): veth1769ced: link becomes ready
1404[ 124.582773] docker0: port 5(veth1769ced) entered blocking state
1405[ 124.582774] docker0: port 5(veth1769ced) entered forwarding state
1406[ 125.992891] vethc40fcb1: renamed from eth0
1407[ 126.015953] docker0: port 5(veth1769ced) entered disabled state
1408[ 126.106539] docker0: port 5(veth1769ced) entered disabled state
1409[ 126.109154] device veth1769ced left promiscuous mode
1410[ 126.109156] docker0: port 5(veth1769ced) entered disabled state
1411