· 8 years ago · Mar 05, 2018, 08:40 PM
1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.0.6-gentoo (root@(none)) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #6 SMP Fri Oct 21 02:32:34 EDT 2011
4[ 0.000000] Command line: root=/dev/sda3 ro
5[ 0.000000] BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
7[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
8[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
9[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
10[ 0.000000] BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
11[ 0.000000] BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
12[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
13[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
14[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
15[ 0.000000] BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
16[ 0.000000] NX (Execute Disable) protection: active
17[ 0.000000] DMI 2.4 present.
18[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-990XA-UD3/GA-990XA-UD3, BIOS F9 10/13/2011
19[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
20[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
21[ 0.000000] No AGP bridge found
22[ 0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
23[ 0.000000] MTRR default type: uncachable
24[ 0.000000] MTRR fixed ranges enabled:
25[ 0.000000] 00000-9FFFF write-back
26[ 0.000000] A0000-BFFFF uncachable
27[ 0.000000] C0000-C7FFF write-protect
28[ 0.000000] C8000-FFFFF uncachable
29[ 0.000000] MTRR variable ranges enabled:
30[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
31[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
32[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
33[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
34[ 0.000000] 4 disabled
35[ 0.000000] 5 disabled
36[ 0.000000] 6 disabled
37[ 0.000000] 7 disabled
38[ 0.000000] TOM2: 000000042f000000 aka 17136M
39[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
40[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
41[ 0.000000] last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
42[ 0.000000] found SMP MP-table at [ffff8800000f4b30] f4b30
43[ 0.000000] initial memory mapped : 0 - 20000000
44[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
45[ 0.000000] Using GB pages for direct mapping
46[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfda0000
47[ 0.000000] 0000000000 - 00c0000000 page 1G
48[ 0.000000] 00c0000000 - 00cfc00000 page 2M
49[ 0.000000] 00cfc00000 - 00cfda0000 page 4k
50[ 0.000000] kernel direct mapping tables up to cfda0000 @ cfd9d000-cfda0000
51[ 0.000000] init_memory_mapping: 0000000100000000-000000042f000000
52[ 0.000000] 0100000000 - 0400000000 page 1G
53[ 0.000000] 0400000000 - 042f000000 page 2M
54[ 0.000000] kernel direct mapping tables up to 42f000000 @ 42effe000-42f000000
55[ 0.000000] ACPI: RSDP 00000000000f6a50 00014 (v00 GBT )
56[ 0.000000] ACPI: RSDT 00000000cfdd1000 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
57[ 0.000000] ACPI: FACP 00000000cfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
58[ 0.000000] ACPI: DSDT 00000000cfdd1100 07A4B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
59[ 0.000000] ACPI: FACS 00000000cfda0000 00040
60[ 0.000000] ACPI: MSDM 00000000cfdd8c40 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
61[ 0.000000] ACPI: HPET 00000000cfdd8cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
62[ 0.000000] ACPI: MCFG 00000000cfdd8d00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
63[ 0.000000] ACPI: MATS 00000000cfdd8d80 00034 (v01 GBT 00000000 00000000)
64[ 0.000000] ACPI: TAMG 00000000cfdd8df0 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
65[ 0.000000] ACPI: APIC 00000000cfdd8b80 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
66[ 0.000000] ACPI: MATS 00000000cfdd9000 06207 (v01 MATS RCM 80000001 INTL 20061109)
67[ 0.000000] ACPI: SSDT 00000000cfddf280 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
68[ 0.000000] ACPI: Local APIC address 0xfee00000
69[ 0.000000] No NUMA configuration found
70[ 0.000000] Faking a node at 0000000000000000-000000042f000000
71[ 0.000000] Initmem setup node 0 0000000000000000-000000042f000000
72[ 0.000000] NODE_DATA [000000042eff9000 - 000000042effdfff]
73[ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041e600000-ffff88042c7fffff] on node 0
74[ 0.000000] Zone PFN ranges:
75[ 0.000000] DMA 0x00000010 -> 0x00001000
76[ 0.000000] DMA32 0x00001000 -> 0x00100000
77[ 0.000000] Normal 0x00100000 -> 0x0042f000
78[ 0.000000] Movable zone start PFN for each node
79[ 0.000000] early_node_map[3] active PFN ranges
80[ 0.000000] 0: 0x00000010 -> 0x0000009f
81[ 0.000000] 0: 0x00000100 -> 0x000cfda0
82[ 0.000000] 0: 0x00100000 -> 0x0042f000
83[ 0.000000] On node 0 totalpages: 4189487
84[ 0.000000] DMA zone: 56 pages used for memmap
85[ 0.000000] DMA zone: 5 pages reserved
86[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
87[ 0.000000] DMA32 zone: 14280 pages used for memmap
88[ 0.000000] DMA32 zone: 832984 pages, LIFO batch:31
89[ 0.000000] Normal zone: 45640 pages used for memmap
90[ 0.000000] Normal zone: 3292600 pages, LIFO batch:31
91[ 0.000000] ACPI: PM-Timer IO Port: 0x808
92[ 0.000000] ACPI: Local APIC address 0xfee00000
93[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
94[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
95[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
96[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
97[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
98[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
99[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
100[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
101[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
102[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
103[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
104[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
105[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
106[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
107[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
108[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
109[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
110[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
111[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
113[ 0.000000] ACPI: IRQ0 used by override.
114[ 0.000000] ACPI: IRQ2 used by override.
115[ 0.000000] ACPI: IRQ9 used by override.
116[ 0.000000] Using ACPI (MADT) for SMP configuration information
117[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
118[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
119[ 0.000000] nr_irqs_gsi: 40
120[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
121[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
122[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
123[ 0.000000] PM: Registered nosave memory: 00000000cfda0000 - 00000000cfdd1000
124[ 0.000000] PM: Registered nosave memory: 00000000cfdd1000 - 00000000cfe00000
125[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
126[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
127[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
128[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
129[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
130[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
131[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
132[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88042ec00000 s70912 r8192 d23296 u262144
133[ 0.000000] pcpu-alloc: s70912 r8192 d23296 u262144 alloc=1*2097152
134[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
135[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129506
136[ 0.000000] Policy zone: Normal
137[ 0.000000] Kernel command line: root=/dev/sda3 ro
138[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
139[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
140[ 0.000000] Checking aperture...
141[ 0.000000] No AGP bridge found
142[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
143[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
144[ 0.000000] Your BIOS doesn't leave a aperture memory hole
145[ 0.000000] Please enable the IOMMU option in the BIOS setup
146[ 0.000000] This costs you 64 MB of RAM
147[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
148[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
149[ 0.000000] Memory: 16379432k/17547264k available (6832k kernel code, 789316k absent, 378516k reserved, 6018k data, 648k init)
150[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
151[ 0.000000] Hierarchical RCU implementation.
152[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
153[ 0.000000] Console: colour VGA+ 80x25
154[ 0.000000] console [tty0] enabled
155[ 0.000000] hpet clockevent registered
156[ 0.000000] Fast TSC calibration using PIT
157[ 0.000000] Detected 3120.307 MHz processor.
158[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6240.61 BogoMIPS (lpj=3120307)
159[ 0.001152] pid_max: default: 32768 minimum: 301
160[ 0.001243] Security Framework initialized
161[ 0.001317] SELinux: Initializing.
162[ 0.001395] SELinux: Starting in permissive mode
163[ 0.003142] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
164[ 0.007294] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
165[ 0.009117] Mount-cache hash table entries: 256
166[ 0.009292] Initializing cgroup subsys cpuacct
167[ 0.009368] Initializing cgroup subsys freezer
168[ 0.009459] tseg: 00cff00000
169[ 0.009460] CPU: Physical Processor ID: 0
170[ 0.009533] CPU: Processor Core ID: 0
171[ 0.009607] mce: CPU supports 7 MCE banks
172[ 0.009732] ACPI: Core revision 20110413
173[ 0.012303] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
174[ 0.022885] CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02
175[ 0.023998] Performance Events: AMD Family 15h PMU driver.
176[ 0.023998] ... version: 0
177[ 0.023998] ... bit width: 48
178[ 0.023998] ... generic registers: 6
179[ 0.023998] ... value mask: 0000ffffffffffff
180[ 0.023998] ... max period: 00007fffffffffff
181[ 0.023998] ... fixed-purpose events: 0
182[ 0.023998] ... event mask: 000000000000003f
183[ 0.023998] MCE: In-kernel MCE decoding enabled.
184[ 0.023998] Booting Node 0, Processors #1
185[ 0.023998] smpboot cpu 1: start_ip = 9a000
186[ 0.096057] #2
187[ 0.096092] smpboot cpu 2: start_ip = 9a000
188[ 0.168032] #3
189[ 0.168066] smpboot cpu 3: start_ip = 9a000
190[ 0.240020] #4
191[ 0.240054] smpboot cpu 4: start_ip = 9a000
192[ 0.312005] #5
193[ 0.312039] smpboot cpu 5: start_ip = 9a000
194[ 0.383995] #6
195[ 0.384029] smpboot cpu 6: start_ip = 9a000
196[ 0.455991] #7 Ok.
197[ 0.456063] smpboot cpu 7: start_ip = 9a000
198[ 0.527932] Brought up 8 CPUs
199[ 0.528005] Total of 8 processors activated (49925.64 BogoMIPS).
200[ 0.528994] kworker/u:0 used greatest stack depth: 5624 bytes left
201[ 0.529060] PM: Registering ACPI NVS region at cfda0000 (200704 bytes)
202[ 0.529992] Time: 15:05:54 Date: 11/04/11
203[ 0.530092] NET: Registered protocol family 16
204[ 0.530177] Extended Config Space enabled on 1 nodes
205[ 0.530177] ACPI: bus type pci registered
206[ 0.530177] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
207[ 0.530177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
208[ 0.554651] PCI: Using configuration type 1 for base access
209[ 0.562102] bio: create slab <bio-0> at 0
210[ 0.563320] ACPI: EC: Look up EC in DSDT
211[ 0.568970] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110413/tbutils-314)
212[ 0.569258] ACPI: Interpreter enabled
213[ 0.569333] ACPI: (supports S0 S3 S4 S5)
214[ 0.569553] ACPI: Using IOAPIC for interrupt routing
215[ 0.600094] ACPI: No dock devices found.
216[ 0.600094] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
217[ 0.600961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
218[ 0.601061] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
219[ 0.601061] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
220[ 0.601133] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
221[ 0.601250] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
222[ 0.601364] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
223[ 0.601478] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
224[ 0.601930] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
225[ 0.601941] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
226[ 0.601978] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
227[ 0.602001] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
228[ 0.602003] pci 0000:00:02.0: PME# disabled
229[ 0.602017] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
230[ 0.602039] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
231[ 0.602041] pci 0000:00:04.0: PME# disabled
232[ 0.602055] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
233[ 0.602077] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
234[ 0.602079] pci 0000:00:09.0: PME# disabled
235[ 0.602089] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
236[ 0.602111] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
237[ 0.602113] pci 0000:00:0a.0: PME# disabled
238[ 0.602133] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
239[ 0.602147] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
240[ 0.602154] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
241[ 0.602161] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
242[ 0.602168] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
243[ 0.602175] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
244[ 0.602919] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
245[ 0.602934] pci 0000:00:11.0: set SATA to AHCI mode
246[ 0.603034] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
247[ 0.603044] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
248[ 0.603094] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
249[ 0.603108] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
250[ 0.603158] pci 0000:00:12.2: supports D1 D2
251[ 0.603159] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
252[ 0.603162] pci 0000:00:12.2: PME# disabled
253[ 0.603178] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
254[ 0.603187] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
255[ 0.603237] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
256[ 0.603251] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
257[ 0.603301] pci 0000:00:13.2: supports D1 D2
258[ 0.603303] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
259[ 0.603306] pci 0000:00:13.2: PME# disabled
260[ 0.603323] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
261[ 0.603374] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
262[ 0.603384] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
263[ 0.603391] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
264[ 0.603398] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
265[ 0.603405] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
266[ 0.603413] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
267[ 0.603439] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
268[ 0.603456] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
269[ 0.603497] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
270[ 0.603500] pci 0000:00:14.2: PME# disabled
271[ 0.603510] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
272[ 0.603563] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
273[ 0.603592] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
274[ 0.603602] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
275[ 0.603652] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
276[ 0.603691] pci 0000:00:15.0: supports D1 D2
277[ 0.603706] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
278[ 0.603715] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
279[ 0.603767] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
280[ 0.603781] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
281[ 0.603830] pci 0000:00:16.2: supports D1 D2
282[ 0.603832] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
283[ 0.603835] pci 0000:00:16.2: PME# disabled
284[ 0.603850] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
285[ 0.603865] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
286[ 0.603878] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
287[ 0.603891] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
288[ 0.603905] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
289[ 0.603920] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
290[ 0.603967] pci 0000:01:00.0: [10de:0640] type 0 class 0x000300
291[ 0.603976] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
292[ 0.603985] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
293[ 0.603995] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
294[ 0.604001] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f]
295[ 0.604007] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
296[ 0.605935] pci 0000:00:02.0: PCI bridge to [bus 01-01]
297[ 0.606012] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
298[ 0.606014] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
299[ 0.606017] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
300[ 0.606050] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
301[ 0.606064] pci 0000:02:00.0: reg 10: [mem 0xfd9f8000-0xfd9fffff 64bit]
302[ 0.606114] pci 0000:02:00.0: supports D1 D2
303[ 0.606116] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
304[ 0.606119] pci 0000:02:00.0: PME# disabled
305[ 0.607931] pci 0000:00:04.0: PCI bridge to [bus 02-02]
306[ 0.608008] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
307[ 0.608010] pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
308[ 0.608013] pci 0000:00:04.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
309[ 0.608045] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
310[ 0.608057] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff]
311[ 0.608075] pci 0000:03:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
312[ 0.608087] pci 0000:03:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
313[ 0.608120] pci 0000:03:00.0: supports D1 D2
314[ 0.608121] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.608125] pci 0000:03:00.0: PME# disabled
316[ 0.609931] pci 0000:00:09.0: PCI bridge to [bus 03-03]
317[ 0.610008] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
318[ 0.610010] pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff]
319[ 0.610013] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
320[ 0.610044] pci 0000:04:00.0: [1b6f:7023] type 0 class 0x000c03
321[ 0.610058] pci 0000:04:00.0: reg 10: [mem 0xfddf8000-0xfddfffff 64bit]
322[ 0.610109] pci 0000:04:00.0: supports D1 D2
323[ 0.610110] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
324[ 0.610113] pci 0000:04:00.0: PME# disabled
325[ 0.611928] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
326[ 0.612005] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
327[ 0.612007] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
328[ 0.612010] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
329[ 0.612047] pci 0000:05:0e.0: [1106:3044] type 0 class 0x000c00
330[ 0.612065] pci 0000:05:0e.0: reg 10: [mem 0xfdbff000-0xfdbff7ff]
331[ 0.612075] pci 0000:05:0e.0: reg 14: [io 0xaf00-0xaf7f]
332[ 0.612139] pci 0000:05:0e.0: supports D2
333[ 0.612140] pci 0000:05:0e.0: PME# supported from D2 D3hot D3cold
334[ 0.612144] pci 0000:05:0e.0: PME# disabled
335[ 0.612171] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
336[ 0.612250] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
337[ 0.612253] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
338[ 0.612256] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
339[ 0.612258] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
340[ 0.612259] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
341[ 0.612261] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
342[ 0.612263] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
343[ 0.612264] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
344[ 0.612266] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
345[ 0.612300] pci 0000:00:15.0: PCI bridge to [bus 06-06]
346[ 0.612378] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
347[ 0.612381] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff]
348[ 0.612385] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
349[ 0.612400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
350[ 0.612610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
351[ 0.612641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
352[ 0.612685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
353[ 0.612708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
354[ 0.612734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
355[ 0.612755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
356[ 0.612780] pci0000:00: Requesting ACPI _OSC control (0x1d)
357[ 0.612856] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
358[ 0.612917] ACPI _OSC control for PCIe not granted, disabling ASPM
359[ 0.623944] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
360[ 0.624366] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
361[ 0.625203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
362[ 0.625624] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
363[ 0.626041] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
364[ 0.626460] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
365[ 0.626877] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
366[ 0.627298] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
367[ 0.627709] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
368[ 0.627918] vgaarb: loaded
369[ 0.627991] vgaarb: bridge control possible 0000:01:00.0
370[ 0.628108] SCSI subsystem initialized
371[ 0.628108] libata version 3.00 loaded.
372[ 0.628108] usbcore: registered new interface driver usbfs
373[ 0.628108] usbcore: registered new interface driver hub
374[ 0.628108] usbcore: registered new device driver usb
375[ 0.628926] Advanced Linux Sound Architecture Driver Version 1.0.24.
376[ 0.628998] PCI: Using ACPI for IRQ routing
377[ 0.635405] PCI: pci_cache_line_size set to 64 bytes
378[ 0.635412] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
379[ 0.635598] reserve RAM buffer: 000000000009f800 - 000000000009ffff
380[ 0.635600] reserve RAM buffer: 00000000cfda0000 - 00000000cfffffff
381[ 0.635602] reserve RAM buffer: 000000042f000000 - 000000042fffffff
382[ 0.635613] cfg80211: Calling CRDA to update world regulatory domain
383[ 0.636032] NetLabel: Initializing
384[ 0.636105] NetLabel: domain hash size = 128
385[ 0.636179] NetLabel: protocols = UNLABELED CIPSOv4
386[ 0.636260] NetLabel: unlabeled traffic allowed by default
387[ 0.636341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
388[ 0.636341] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
389[ 0.637944] Switching to clocksource hpet
390[ 0.638051] Switched to NOHz mode on CPU #0
391[ 0.638018] Switched to NOHz mode on CPU #1
392[ 0.638048] Switched to NOHz mode on CPU #2
393[ 0.638056] Switched to NOHz mode on CPU #3
394[ 0.638071] Switched to NOHz mode on CPU #7
395[ 0.638076] Switched to NOHz mode on CPU #4
396[ 0.638077] Switched to NOHz mode on CPU #5
397[ 0.638090] Switched to NOHz mode on CPU #6
398[ 0.643224] pnp: PnP ACPI init
399[ 0.643301] ACPI: bus type pnp registered
400[ 0.643428] pnp 00:00: [bus 00-ff]
401[ 0.643430] pnp 00:00: [io 0x0cf8-0x0cff]
402[ 0.643432] pnp 00:00: [io 0x0000-0x0cf7 window]
403[ 0.643433] pnp 00:00: [io 0x0d00-0xffff window]
404[ 0.643435] pnp 00:00: [mem 0x000a0000-0x000bffff window]
405[ 0.643436] pnp 00:00: [mem 0x000c0000-0x000dffff window]
406[ 0.643438] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
407[ 0.643439] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
408[ 0.643502] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
409[ 0.643509] pnp 00:01: [io 0x0010-0x001f]
410[ 0.643511] pnp 00:01: [io 0x0022-0x003f]
411[ 0.643512] pnp 00:01: [io 0x0044-0x004d]
412[ 0.643514] pnp 00:01: [io 0x0050-0x005f]
413[ 0.643515] pnp 00:01: [io 0x0062-0x0063]
414[ 0.643516] pnp 00:01: [io 0x0065-0x006f]
415[ 0.643517] pnp 00:01: [io 0x0074-0x007f]
416[ 0.643518] pnp 00:01: [io 0x0091-0x0093]
417[ 0.643520] pnp 00:01: [io 0x00a2-0x00bf]
418[ 0.643521] pnp 00:01: [io 0x00e0-0x00ef]
419[ 0.643522] pnp 00:01: [io 0x04d0-0x04d1]
420[ 0.643523] pnp 00:01: [io 0x0220-0x0225]
421[ 0.643524] pnp 00:01: [io 0x0290-0x0294]
422[ 0.643598] system 00:01: [io 0x04d0-0x04d1] has been reserved
423[ 0.643674] system 00:01: [io 0x0220-0x0225] has been reserved
424[ 0.643750] system 00:01: [io 0x0290-0x0294] has been reserved
425[ 0.643826] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
426[ 0.709099] pnp 00:02: [io 0x0900-0x091f]
427[ 0.709101] pnp 00:02: [io 0x0228-0x022f]
428[ 0.709103] pnp 00:02: [io 0x040b]
429[ 0.709104] pnp 00:02: [io 0x04d6]
430[ 0.709105] pnp 00:02: [io 0x0c00-0x0c01]
431[ 0.709106] pnp 00:02: [io 0x0c14]
432[ 0.709108] pnp 00:02: [io 0x0c50-0x0c52]
433[ 0.709109] pnp 00:02: [io 0x0c6c-0x0c6d]
434[ 0.709110] pnp 00:02: [io 0x0c6f]
435[ 0.709111] pnp 00:02: [io 0x0cd0-0x0cd1]
436[ 0.709112] pnp 00:02: [io 0x0cd2-0x0cd3]
437[ 0.709113] pnp 00:02: [io 0x0cd4-0x0cdf]
438[ 0.709114] pnp 00:02: [io 0x0800-0x08fe]
439[ 0.709115] pnp 00:02: [io 0x0a10-0x0a17]
440[ 0.709116] pnp 00:02: [io 0x0b00-0x0b0f]
441[ 0.709118] pnp 00:02: [io 0x0b10-0x0b1f]
442[ 0.709119] pnp 00:02: [io 0x0b20-0x0b3f]
443[ 0.709120] pnp 00:02: [mem 0x00000000-0x00000fff window]
444[ 0.709122] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
445[ 0.709126] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
446[ 0.709274] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
447[ 0.709469] system 00:02: [io 0x0900-0x091f] has been reserved
448[ 0.709546] system 00:02: [io 0x0228-0x022f] has been reserved
449[ 0.709621] system 00:02: [io 0x040b] has been reserved
450[ 0.709697] system 00:02: [io 0x04d6] has been reserved
451[ 0.709772] system 00:02: [io 0x0c00-0x0c01] has been reserved
452[ 0.709848] system 00:02: [io 0x0c14] has been reserved
453[ 0.709924] system 00:02: [io 0x0c50-0x0c52] has been reserved
454[ 0.710000] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
455[ 0.710086] system 00:02: [io 0x0c6f] has been reserved
456[ 0.710161] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
457[ 0.710237] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
458[ 0.710313] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
459[ 0.710389] system 00:02: [io 0x0800-0x08fe] has been reserved
460[ 0.710466] system 00:02: [io 0x0a10-0x0a17] has been reserved
461[ 0.710542] system 00:02: [io 0x0b00-0x0b0f] has been reserved
462[ 0.710618] system 00:02: [io 0x0b10-0x0b1f] has been reserved
463[ 0.710694] system 00:02: [io 0x0b20-0x0b3f] has been reserved
464[ 0.710770] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
465[ 0.710885] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
466[ 0.710955] pnp 00:03: [dma 4]
467[ 0.710956] pnp 00:03: [io 0x0000-0x000f]
468[ 0.710958] pnp 00:03: [io 0x0080-0x0090]
469[ 0.710959] pnp 00:03: [io 0x0094-0x009f]
470[ 0.710960] pnp 00:03: [io 0x00c0-0x00df]
471[ 0.711029] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
472[ 0.711071] pnp 00:04: [irq 0 disabled]
473[ 0.711077] pnp 00:04: [irq 8]
474[ 0.711079] pnp 00:04: [mem 0xfed00000-0xfed003ff]
475[ 0.711132] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
476[ 0.711155] pnp 00:05: [io 0x0070-0x0073]
477[ 0.711207] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
478[ 0.711213] pnp 00:06: [io 0x0061]
479[ 0.711268] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
480[ 0.711274] pnp 00:07: [io 0x00f0-0x00ff]
481[ 0.711278] pnp 00:07: [irq 13]
482[ 0.711330] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
483[ 0.711561] pnp 00:08: [io 0x03f8-0x03ff]
484[ 0.711564] pnp 00:08: [irq 4]
485[ 0.711638] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
486[ 0.711685] pnp 00:09: [mem 0xe0000000-0xefffffff]
487[ 0.711762] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
488[ 0.711839] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
489[ 0.711943] pnp 00:0a: [mem 0x000cde00-0x000cffff]
490[ 0.711945] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
491[ 0.711946] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
492[ 0.711948] pnp 00:0a: [mem 0x000fc000-0x000fffff]
493[ 0.711949] pnp 00:0a: [mem 0xcfda0000-0xcfdfffff]
494[ 0.711950] pnp 00:0a: [mem 0xffff0000-0xffffffff]
495[ 0.711952] pnp 00:0a: [mem 0x00000000-0x0009ffff]
496[ 0.711953] pnp 00:0a: [mem 0x00100000-0xcfd9ffff]
497[ 0.711954] pnp 00:0a: [mem 0xcfe00000-0xcfefffff]
498[ 0.711955] pnp 00:0a: [mem 0xcff00000-0xcfffffff]
499[ 0.711957] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
500[ 0.711958] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
501[ 0.711959] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
502[ 0.711962] pnp 00:0a: disabling [mem 0x000cde00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
503[ 0.712095] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
504[ 0.712215] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
505[ 0.712335] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
506[ 0.712455] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
507[ 0.712576] pnp 00:0a: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
508[ 0.712787] system 00:0a: [mem 0xcfda0000-0xcfdfffff] could not be reserved
509[ 0.712864] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
510[ 0.712942] system 00:0a: [mem 0xcfe00000-0xcfefffff] has been reserved
511[ 0.713030] system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved
512[ 0.713108] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
513[ 0.713185] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
514[ 0.713262] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
515[ 0.713339] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
516[ 0.713358] pnp: PnP ACPI: found 11 devices
517[ 0.713432] ACPI: ACPI bus type pnp unregistered
518[ 0.718166] PCI: max bus depth: 1 pci_try_num: 2
519[ 0.718189] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
520[ 0.718303] pci 0000:00:02.0: PCI bridge to [bus 01-01]
521[ 0.718379] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
522[ 0.718457] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
523[ 0.718534] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
524[ 0.718650] pci 0000:00:04.0: PCI bridge to [bus 02-02]
525[ 0.718725] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
526[ 0.718802] pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
527[ 0.718879] pci 0000:00:04.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
528[ 0.718995] pci 0000:00:09.0: PCI bridge to [bus 03-03]
529[ 0.719078] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
530[ 0.719155] pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff]
531[ 0.719232] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
532[ 0.719348] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
533[ 0.719423] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
534[ 0.719501] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff]
535[ 0.719578] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
536[ 0.719694] pci 0000:00:14.4: PCI bridge to [bus 05-05]
537[ 0.719769] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
538[ 0.719847] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
539[ 0.719925] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
540[ 0.720049] pci 0000:00:15.0: PCI bridge to [bus 06-06]
541[ 0.720125] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
542[ 0.720202] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff]
543[ 0.720280] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
544[ 0.720405] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
545[ 0.720484] pci 0000:00:02.0: setting latency timer to 64
546[ 0.720490] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
547[ 0.720567] pci 0000:00:04.0: setting latency timer to 64
548[ 0.720573] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
549[ 0.720650] pci 0000:00:09.0: setting latency timer to 64
550[ 0.720653] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
551[ 0.720730] pci 0000:00:0a.0: setting latency timer to 64
552[ 0.720737] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
553[ 0.720815] pci 0000:00:15.0: setting latency timer to 64
554[ 0.720817] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
555[ 0.720819] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
556[ 0.720821] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
557[ 0.720822] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
558[ 0.720824] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
559[ 0.720826] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
560[ 0.720828] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
561[ 0.720829] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
562[ 0.720831] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
563[ 0.720833] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
564[ 0.720835] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
565[ 0.720836] pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
566[ 0.720838] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
567[ 0.720840] pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd5fffff]
568[ 0.720842] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
569[ 0.720843] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
570[ 0.720845] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
571[ 0.720847] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
572[ 0.720849] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
573[ 0.720850] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
574[ 0.720852] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff pref]
575[ 0.720854] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
576[ 0.720855] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
577[ 0.720857] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
578[ 0.720859] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
579[ 0.720860] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
580[ 0.720862] pci_bus 0000:05: resource 9 [mem 0xd0000000-0xfebfffff]
581[ 0.720864] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
582[ 0.720865] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
583[ 0.720867] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
584[ 0.720889] NET: Registered protocol family 2
585[ 0.721355] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
586[ 0.722847] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
587[ 0.724691] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
588[ 0.724965] TCP: Hash tables configured (established 524288 bind 65536)
589[ 0.725051] TCP reno registered
590[ 0.725151] UDP hash table entries: 8192 (order: 6, 262144 bytes)
591[ 0.725304] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
592[ 0.725508] NET: Registered protocol family 1
593[ 0.725663] RPC: Registered named UNIX socket transport module.
594[ 0.725739] RPC: Registered udp transport module.
595[ 0.725813] RPC: Registered tcp transport module.
596[ 0.725887] RPC: Registered tcp NFSv4.1 backchannel transport module.
597[ 0.779109] pci 0000:01:00.0: Boot video device
598[ 0.779175] PCI: CLS 64 bytes, default 64
599[ 0.779503] PCI-DMA: Disabling AGP.
600[ 0.779661] PCI-DMA: aperture base @ c4000000 size 65536 KB
601[ 0.779736] PCI-DMA: using GART IOMMU.
602[ 0.779810] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
603[ 0.786661] microcode: CPU0: patch_level=0x06000613
604[ 0.786742] microcode: CPU1: patch_level=0x06000613
605[ 0.786825] microcode: CPU2: patch_level=0x06000613
606[ 0.786913] microcode: CPU3: patch_level=0x06000613
607[ 0.786994] microcode: CPU4: patch_level=0x06000613
608[ 0.787083] microcode: CPU5: patch_level=0x06000613
609[ 0.787169] microcode: CPU6: patch_level=0x06000613
610[ 0.787253] microcode: CPU7: patch_level=0x06000613
611[ 0.787370] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
612[ 0.787724] audit: initializing netlink socket (disabled)
613[ 0.787807] type=2000 audit(1320419153.786:1): initialized
614[ 0.823467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
615[ 0.827277] VFS: Disk quotas dquot_6.5.2
616[ 0.827425] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
617[ 0.828321] msgmni has been set to 32119
618[ 0.828482] SELinux: Registering netfilter hooks
619[ 0.828899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
620[ 0.829026] io scheduler noop registered
621[ 0.829100] io scheduler deadline registered
622[ 0.829237] io scheduler cfq registered (default)
623[ 0.829611] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
624[ 0.829747] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
625[ 1.094140] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
626[ 1.171653] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
627[ 1.189348] Non-volatile memory driver v1.3
628[ 1.189422] Linux agpgart interface v0.103
629[ 1.190677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
630[ 1.190794] ACPI: Power Button [PWRB]
631[ 1.190930] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
632[ 1.191056] ACPI: Power Button [PWRF]
633[ 1.191267] ACPI: acpi_idle registered with cpuidle
634[ 1.260733] [drm] Initialized drm 1.1.0 20060810
635[ 1.260813] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
636[ 1.262609] brd: module loaded
637[ 1.263528] loop: module loaded
638[ 1.263853] ahci 0000:00:11.0: version 3.0
639[ 1.263868] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
640[ 1.264051] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
641[ 1.264167] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
642[ 1.264980] scsi0 : ahci
643[ 1.265194] scsi1 : ahci
644[ 1.265376] scsi2 : ahci
645[ 1.265557] scsi3 : ahci
646[ 1.265759] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
647[ 1.265874] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
648[ 1.265989] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
649[ 1.266114] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
650[ 1.266556] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
651[ 1.266633] e1000: Copyright (c) 1999-2006 Intel Corporation.
652[ 1.266755] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
653[ 1.266830] e100: Copyright(c) 1999-2006 Intel Corporation
654[ 1.266990] sky2: driver version 1.28
655[ 1.267210] console [netcon0] enabled
656[ 1.267283] netconsole: network logging started
657[ 1.267488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
658[ 1.267565] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
659[ 1.267575] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
660[ 1.267659] ehci_hcd 0000:00:12.2: EHCI Host Controller
661[ 1.267745] drivers/usb/core/inode.c: creating file 'devices'
662[ 1.267747] drivers/usb/core/inode.c: creating file '001'
663[ 1.267797] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
664[ 1.267916] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
665[ 1.267919] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
666[ 1.267922] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
667[ 1.268071] QUIRK: Enable AMD PLL fix
668[ 1.268080] ehci_hcd 0000:00:12.2: debug port 1
669[ 1.268156] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
670[ 1.268162] ehci_hcd 0000:00:12.2: MWI active
671[ 1.268163] ehci_hcd 0000:00:12.2: supports USB remote wakeup
672[ 1.268172] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
673[ 1.268249] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
674[ 1.268254] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
675[ 1.275037] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
676[ 1.275133] usb usb1: default language 0x0409
677[ 1.275138] usb usb1: udev 1, busnum 1, minor = 0
678[ 1.275140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
679[ 1.275216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
680[ 1.275331] usb usb1: Product: EHCI Host Controller
681[ 1.275405] usb usb1: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
682[ 1.275483] usb usb1: SerialNumber: 0000:00:12.2
683[ 1.275636] usb usb1: usb_probe_device
684[ 1.275637] usb usb1: configuration #1 chosen from 1 choice
685[ 1.275642] usb usb1: adding 1-0:1.0 (config #1, interface 0)
686[ 1.275689] hub 1-0:1.0: usb_probe_interface
687[ 1.275690] hub 1-0:1.0: usb_probe_interface - got id
688[ 1.275692] hub 1-0:1.0: USB hub found
689[ 1.275767] hub 1-0:1.0: 5 ports detected
690[ 1.275840] hub 1-0:1.0: standalone hub
691[ 1.275841] hub 1-0:1.0: no power switching (usb 1.0)
692[ 1.275843] hub 1-0:1.0: individual port over-current protection
693[ 1.275844] hub 1-0:1.0: power on to power good time: 20ms
694[ 1.275847] hub 1-0:1.0: local power source is good
695[ 1.275849] hub 1-0:1.0: trying to enable port power on non-switchable hub
696[ 1.275867] drivers/usb/core/inode.c: creating file '001'
697[ 1.275896] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
698[ 1.275981] ehci_hcd 0000:00:13.2: EHCI Host Controller
699[ 1.276072] drivers/usb/core/inode.c: creating file '002'
700[ 1.276121] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
701[ 1.276240] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
702[ 1.276242] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
703[ 1.276245] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
704[ 1.276374] ehci_hcd 0000:00:13.2: debug port 1
705[ 1.276450] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
706[ 1.276456] ehci_hcd 0000:00:13.2: MWI active
707[ 1.276457] ehci_hcd 0000:00:13.2: supports USB remote wakeup
708[ 1.276461] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
709[ 1.276538] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
710[ 1.276543] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
711[ 1.283035] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
712[ 1.283127] usb usb2: default language 0x0409
713[ 1.283132] usb usb2: udev 1, busnum 2, minor = 128
714[ 1.283133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
715[ 1.283210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
716[ 1.283324] usb usb2: Product: EHCI Host Controller
717[ 1.283398] usb usb2: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
718[ 1.283474] usb usb2: SerialNumber: 0000:00:13.2
719[ 1.283625] usb usb2: usb_probe_device
720[ 1.283626] usb usb2: configuration #1 chosen from 1 choice
721[ 1.283630] usb usb2: adding 2-0:1.0 (config #1, interface 0)
722[ 1.283677] hub 2-0:1.0: usb_probe_interface
723[ 1.283679] hub 2-0:1.0: usb_probe_interface - got id
724[ 1.283680] hub 2-0:1.0: USB hub found
725[ 1.283755] hub 2-0:1.0: 5 ports detected
726[ 1.283828] hub 2-0:1.0: standalone hub
727[ 1.283830] hub 2-0:1.0: no power switching (usb 1.0)
728[ 1.283831] hub 2-0:1.0: individual port over-current protection
729[ 1.283832] hub 2-0:1.0: power on to power good time: 20ms
730[ 1.283835] hub 2-0:1.0: local power source is good
731[ 1.283836] hub 2-0:1.0: trying to enable port power on non-switchable hub
732[ 1.283854] drivers/usb/core/inode.c: creating file '001'
733[ 1.283882] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
734[ 1.283966] ehci_hcd 0000:00:16.2: EHCI Host Controller
735[ 1.284057] drivers/usb/core/inode.c: creating file '003'
736[ 1.284112] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
737[ 1.284230] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4
738[ 1.284233] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
739[ 1.284236] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
740[ 1.284364] ehci_hcd 0000:00:16.2: debug port 1
741[ 1.284441] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
742[ 1.284447] ehci_hcd 0000:00:16.2: MWI active
743[ 1.284448] ehci_hcd 0000:00:16.2: supports USB remote wakeup
744[ 1.284452] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
745[ 1.284530] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
746[ 1.284535] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
747[ 1.290042] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
748[ 1.290132] usb usb3: default language 0x0409
749[ 1.290136] usb usb3: udev 1, busnum 3, minor = 256
750[ 1.290137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
751[ 1.290214] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
752[ 1.290328] usb usb3: Product: EHCI Host Controller
753[ 1.290402] usb usb3: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
754[ 1.290479] usb usb3: SerialNumber: 0000:00:16.2
755[ 1.290632] usb usb3: usb_probe_device
756[ 1.290634] usb usb3: configuration #1 chosen from 1 choice
757[ 1.290638] usb usb3: adding 3-0:1.0 (config #1, interface 0)
758[ 1.290683] hub 3-0:1.0: usb_probe_interface
759[ 1.290684] hub 3-0:1.0: usb_probe_interface - got id
760[ 1.290685] hub 3-0:1.0: USB hub found
761[ 1.290760] hub 3-0:1.0: 4 ports detected
762[ 1.290833] hub 3-0:1.0: standalone hub
763[ 1.290834] hub 3-0:1.0: no power switching (usb 1.0)
764[ 1.290836] hub 3-0:1.0: individual port over-current protection
765[ 1.290837] hub 3-0:1.0: power on to power good time: 20ms
766[ 1.290840] hub 3-0:1.0: local power source is good
767[ 1.290841] hub 3-0:1.0: trying to enable port power on non-switchable hub
768[ 1.290858] drivers/usb/core/inode.c: creating file '001'
769[ 1.290919] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
770[ 1.290995] ohci_hcd: block sizes: ed 80 td 96
771[ 1.291013] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
772[ 1.291100] ohci_hcd 0000:00:12.0: OHCI Host Controller
773[ 1.291177] drivers/usb/core/inode.c: creating file '004'
774[ 1.291227] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
775[ 1.291344] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
776[ 1.291354] ohci_hcd 0000:00:12.0: created debug files
777[ 1.291355] ohci_hcd 0000:00:12.0: supports USB remote wakeup
778[ 1.291364] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
779[ 1.346055] ohci_hcd 0000:00:12.0: OHCI controller state
780[ 1.346058] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
781[ 1.346061] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
782[ 1.346064] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
783[ 1.346066] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
784[ 1.346069] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
785[ 1.346076] ohci_hcd 0000:00:12.0: hcca frame #0005
786[ 1.346079] ohci_hcd 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
787[ 1.346082] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
788[ 1.346084] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
789[ 1.346088] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
790[ 1.346090] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
791[ 1.346093] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
792[ 1.346096] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
793[ 1.346098] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
794[ 1.346105] usb usb4: default language 0x0409
795[ 1.346109] usb usb4: udev 1, busnum 4, minor = 384
796[ 1.346110] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
797[ 1.346187] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
798[ 1.346302] usb usb4: Product: OHCI Host Controller
799[ 1.346376] usb usb4: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
800[ 1.346452] usb usb4: SerialNumber: 0000:00:12.0
801[ 1.346608] usb usb4: usb_probe_device
802[ 1.346610] usb usb4: configuration #1 chosen from 1 choice
803[ 1.346614] usb usb4: adding 4-0:1.0 (config #1, interface 0)
804[ 1.346660] hub 4-0:1.0: usb_probe_interface
805[ 1.346661] hub 4-0:1.0: usb_probe_interface - got id
806[ 1.346663] hub 4-0:1.0: USB hub found
807[ 1.346739] hub 4-0:1.0: 5 ports detected
808[ 1.346813] hub 4-0:1.0: standalone hub
809[ 1.346814] hub 4-0:1.0: no power switching (usb 1.0)
810[ 1.346815] hub 4-0:1.0: global over-current protection
811[ 1.346817] hub 4-0:1.0: power on to power good time: 4ms
812[ 1.346820] hub 4-0:1.0: local power source is good
813[ 1.346822] hub 4-0:1.0: no over-current condition exists
814[ 1.346823] hub 4-0:1.0: trying to enable port power on non-switchable hub
815[ 1.346833] drivers/usb/core/inode.c: creating file '001'
816[ 1.346855] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
817[ 1.346871] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
818[ 1.346956] ohci_hcd 0000:00:13.0: OHCI Host Controller
819[ 1.347043] drivers/usb/core/inode.c: creating file '005'
820[ 1.347094] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
821[ 1.347210] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
822[ 1.347225] ohci_hcd 0000:00:13.0: created debug files
823[ 1.347226] ohci_hcd 0000:00:13.0: supports USB remote wakeup
824[ 1.347229] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
825[ 1.375068] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000
826[ 1.383059] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000
827[ 1.390046] ehci_hcd 0000:00:16.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
828[ 1.390049] hub 3-0:1.0: port 1: status 0501 change 0001
829[ 1.390055] ehci_hcd 0000:00:16.2: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
830[ 1.390057] hub 3-0:1.0: port 2: status 0501 change 0001
831[ 1.390065] ehci_hcd 0000:00:16.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
832[ 1.390066] hub 3-0:1.0: port 4: status 0501 change 0001
833[ 1.402047] ohci_hcd 0000:00:13.0: OHCI controller state
834[ 1.402050] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
835[ 1.402053] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
836[ 1.402056] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
837[ 1.402058] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
838[ 1.402061] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
839[ 1.402068] ohci_hcd 0000:00:13.0: hcca frame #0005
840[ 1.402071] ohci_hcd 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
841[ 1.402074] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
842[ 1.402076] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
843[ 1.402079] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
844[ 1.402082] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
845[ 1.402084] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
846[ 1.402087] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
847[ 1.402090] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
848[ 1.402096] usb usb5: default language 0x0409
849[ 1.402100] usb usb5: udev 1, busnum 5, minor = 512
850[ 1.402102] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
851[ 1.402178] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
852[ 1.402292] usb usb5: Product: OHCI Host Controller
853[ 1.402367] usb usb5: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
854[ 1.402442] usb usb5: SerialNumber: 0000:00:13.0
855[ 1.402597] usb usb5: usb_probe_device
856[ 1.402599] usb usb5: configuration #1 chosen from 1 choice
857[ 1.402603] usb usb5: adding 5-0:1.0 (config #1, interface 0)
858[ 1.402649] hub 5-0:1.0: usb_probe_interface
859[ 1.402650] hub 5-0:1.0: usb_probe_interface - got id
860[ 1.402651] hub 5-0:1.0: USB hub found
861[ 1.402728] hub 5-0:1.0: 5 ports detected
862[ 1.402801] hub 5-0:1.0: standalone hub
863[ 1.402802] hub 5-0:1.0: no power switching (usb 1.0)
864[ 1.402803] hub 5-0:1.0: global over-current protection
865[ 1.402805] hub 5-0:1.0: power on to power good time: 4ms
866[ 1.402808] hub 5-0:1.0: local power source is good
867[ 1.402809] hub 5-0:1.0: no over-current condition exists
868[ 1.402811] hub 5-0:1.0: trying to enable port power on non-switchable hub
869[ 1.402822] drivers/usb/core/inode.c: creating file '001'
870[ 1.402844] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
871[ 1.402860] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
872[ 1.402944] ohci_hcd 0000:00:14.5: OHCI Host Controller
873[ 1.403032] drivers/usb/core/inode.c: creating file '006'
874[ 1.403084] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
875[ 1.403200] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk
876[ 1.403210] ohci_hcd 0000:00:14.5: created debug files
877[ 1.403212] ohci_hcd 0000:00:14.5: supports USB remote wakeup
878[ 1.403215] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
879[ 1.446068] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
880[ 1.458071] ohci_hcd 0000:00:14.5: OHCI controller state
881[ 1.458074] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
882[ 1.458077] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
883[ 1.458080] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
884[ 1.458082] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
885[ 1.458085] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
886[ 1.458092] ohci_hcd 0000:00:14.5: hcca frame #0005
887[ 1.458095] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
888[ 1.458098] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
889[ 1.458100] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
890[ 1.458103] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
891[ 1.458106] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
892[ 1.458112] usb usb6: default language 0x0409
893[ 1.458116] usb usb6: udev 1, busnum 6, minor = 640
894[ 1.458117] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
895[ 1.458194] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
896[ 1.458308] usb usb6: Product: OHCI Host Controller
897[ 1.458382] usb usb6: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
898[ 1.458458] usb usb6: SerialNumber: 0000:00:14.5
899[ 1.458612] usb usb6: usb_probe_device
900[ 1.458614] usb usb6: configuration #1 chosen from 1 choice
901[ 1.458618] usb usb6: adding 6-0:1.0 (config #1, interface 0)
902[ 1.458664] hub 6-0:1.0: usb_probe_interface
903[ 1.458665] hub 6-0:1.0: usb_probe_interface - got id
904[ 1.458666] hub 6-0:1.0: USB hub found
905[ 1.458743] hub 6-0:1.0: 2 ports detected
906[ 1.458816] hub 6-0:1.0: standalone hub
907[ 1.458817] hub 6-0:1.0: no power switching (usb 1.0)
908[ 1.458819] hub 6-0:1.0: global over-current protection
909[ 1.458820] hub 6-0:1.0: power on to power good time: 4ms
910[ 1.458824] hub 6-0:1.0: local power source is good
911[ 1.458825] hub 6-0:1.0: no over-current condition exists
912[ 1.458826] hub 6-0:1.0: trying to enable port power on non-switchable hub
913[ 1.458835] drivers/usb/core/inode.c: creating file '001'
914[ 1.458871] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
915[ 1.458957] ohci_hcd 0000:00:16.0: OHCI Host Controller
916[ 1.459044] drivers/usb/core/inode.c: creating file '007'
917[ 1.459094] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
918[ 1.459211] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk
919[ 1.459221] ohci_hcd 0000:00:16.0: created debug files
920[ 1.459222] ohci_hcd 0000:00:16.0: supports USB remote wakeup
921[ 1.459226] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
922[ 1.490054] hub 3-0:1.0: state 7 ports 4 chg 0016 evt 0000
923[ 1.490064] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
924[ 1.490071] ehci_hcd 0000:00:16.2: port 1 low speed --> companion
925[ 1.514049] ohci_hcd 0000:00:16.0: OHCI controller state
926[ 1.514052] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers
927[ 1.514055] ohci_hcd 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3
928[ 1.514057] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0
929[ 1.514060] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF
930[ 1.514063] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH
931[ 1.514070] ohci_hcd 0000:00:16.0: hcca frame #0005
932[ 1.514073] ohci_hcd 0000:00:16.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
933[ 1.514076] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000
934[ 1.514078] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE
935[ 1.514081] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00010100 CSC PPS
936[ 1.514084] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00010100 CSC PPS
937[ 1.514087] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS
938[ 1.514089] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00010100 CSC PPS
939[ 1.514095] usb usb7: default language 0x0409
940[ 1.514100] usb usb7: udev 1, busnum 7, minor = 768
941[ 1.514101] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
942[ 1.514178] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
943[ 1.514292] usb usb7: Product: OHCI Host Controller
944[ 1.514366] usb usb7: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
945[ 1.514442] usb usb7: SerialNumber: 0000:00:16.0
946[ 1.514599] usb usb7: usb_probe_device
947[ 1.514600] usb usb7: configuration #1 chosen from 1 choice
948[ 1.514605] usb usb7: adding 7-0:1.0 (config #1, interface 0)
949[ 1.514650] hub 7-0:1.0: usb_probe_interface
950[ 1.514652] hub 7-0:1.0: usb_probe_interface - got id
951[ 1.514653] hub 7-0:1.0: USB hub found
952[ 1.514729] hub 7-0:1.0: 4 ports detected
953[ 1.514803] hub 7-0:1.0: standalone hub
954[ 1.514804] hub 7-0:1.0: no power switching (usb 1.0)
955[ 1.514805] hub 7-0:1.0: global over-current protection
956[ 1.514806] hub 7-0:1.0: power on to power good time: 4ms
957[ 1.514810] hub 7-0:1.0: local power source is good
958[ 1.514811] hub 7-0:1.0: no over-current condition exists
959[ 1.514813] hub 7-0:1.0: trying to enable port power on non-switchable hub
960[ 1.514822] drivers/usb/core/inode.c: creating file '001'
961[ 1.514849] ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0
962[ 1.514894] uhci_hcd: USB Universal Host Controller Interface driver
963[ 1.515074] usbcore: registered new interface driver usblp
964[ 1.515149] Initializing USB Mass Storage driver...
965[ 1.515277] usbcore: registered new interface driver usb-storage
966[ 1.515352] USB Mass Storage support registered.
967[ 1.515480] usbcore: registered new interface driver libusual
968[ 1.515712] i8042: PNP: No PS/2 controller found. Probing ports directly.
969[ 1.541043] ehci_hcd 0000:00:16.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
970[ 1.541054] hub 3-0:1.0: unable to enumerate USB device on port 1
971[ 1.547045] hub 3-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
972[ 1.547052] ehci_hcd 0000:00:16.2: port 2 low speed --> companion
973[ 1.549916] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
974[ 1.550038] i8042: If AUX port is really absent please use the 'i8042.noaux' option
975[ 1.571091] ata4: SATA link down (SStatus 0 SControl 300)
976[ 1.571187] ata3: SATA link down (SStatus 0 SControl 300)
977[ 1.598056] ehci_hcd 0000:00:16.2: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
978[ 1.598071] hub 3-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
979[ 1.614047] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
980[ 1.614050] hub 7-0:1.0: port 1: status 0301 change 0001
981[ 1.614054] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
982[ 1.614056] hub 7-0:1.0: port 2: status 0301 change 0001
983[ 1.614061] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [3] = 0x00010100 CSC PPS
984[ 1.649060] ehci_hcd 0000:00:16.2: port 4 full speed --> companion
985[ 1.649064] ehci_hcd 0000:00:16.2: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT
986[ 1.649068] hub 3-0:1.0: port 4 not reset yet, waiting 50ms
987[ 1.700060] ehci_hcd 0000:00:16.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
988[ 1.700072] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0012
989[ 1.700076] ehci_hcd 0000:00:16.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
990[ 1.700080] hub 3-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
991[ 1.726068] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
992[ 1.726163] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
993[ 1.728694] ata1.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
994[ 1.728777] ata2.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133
995[ 1.728855] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
996[ 1.729528] ata1.00: configured for UDMA/100
997[ 1.730819] ata2.00: configured for UDMA/133
998[ 1.731436] scsi 0:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
999[ 1.734914] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
1000[ 1.735044] cdrom: Uniform CD-ROM driver Revision: 3.20
1001[ 1.735262] sr 0:0:0:0: Attached scsi CD-ROM sr0
1002[ 1.735361] sr 0:0:0:0: Attached scsi generic sg0 type 5
1003[ 1.735560] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
1004[ 1.735875] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
1005[ 1.735955] sd 1:0:0:0: Attached scsi generic sg1 type 0
1006[ 1.736122] sd 1:0:0:0: [sda] Write Protect is off
1007[ 1.736197] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
1008[ 1.736209] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1009[ 1.752268] sda: sda1 sda2 sda3 sda4
1010[ 1.752685] sd 1:0:0:0: [sda] Attached SCSI disk
1011[ 1.784050] Refined TSC clocksource calibration: 3120.816 MHz.
1012[ 1.784127] Switching to clocksource tsc
1013[ 1.800115] serio: i8042 KBD port at 0x60,0x64 irq 1
1014[ 1.800307] mousedev: PS/2 mouse device common for all mice
1015[ 1.800569] rtc_cmos 00:05: RTC can wake from S4
1016[ 1.800729] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
1017[ 1.800820] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
1018[ 1.801120] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
1019[ 1.801985] cpuidle: using governor ladder
1020[ 1.803433] cpuidle: using governor menu
1021[ 1.803507] EFI Variables Facility v0.08 2004-May-17
1022[ 1.804012] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
1023[ 1.804016] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0000
1024[ 1.804018] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
1025[ 1.804022] hub 7-0:1.0: state 7 ports 4 chg 0006 evt 0010
1026[ 1.804027] hub 7-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
1027[ 1.804347] usbcore: registered new interface driver usbhid
1028[ 1.804423] usbhid: USB HID core driver
1029[ 1.804892] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
1030[ 1.818365] hda_codec: ALC889: BIOS auto-probing.
1031[ 1.825042] ALSA device list:
1032[ 1.825115] #0: HDA ATI SB at 0xfdff4000 irq 16
1033[ 1.825219] Netfilter messages via NETLINK v0.30.
1034[ 1.825307] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1035[ 1.825549] ctnetlink v0.93: registering with nfnetlink.
1036[ 1.825927] ip_tables: (C) 2000-2006 Netfilter Core Team
1037[ 1.826038] TCP cubic registered
1038[ 1.826118] Initializing XFRM netlink socket
1039[ 1.826390] NET: Registered protocol family 10
1040[ 1.826871] ip6_tables: (C) 2000-2006 Netfilter Core Team
1041[ 1.826982] IPv6 over IPv4 tunneling driver
1042[ 1.827479] NET: Registered protocol family 17
1043[ 1.827560] Registering the dns_resolver key type
1044[ 1.827757] PM: Hibernation image not present or could not be loaded.
1045[ 1.827764] registered taskstats version 1
1046[ 1.828058] Magic number: 3:434:82
1047[ 1.858287] md: Waiting for all devices to be available before autodetect
1048[ 1.858376] md: If you don't use raid, use raid=noautodetect
1049[ 1.858651] md: Autodetecting RAID arrays.
1050[ 1.858724] md: Scanned 0 and added 0 devices.
1051[ 1.858798] md: autorun ...
1052[ 1.858869] md: ... autorun DONE.
1053[ 1.867034] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
1054[ 1.889044] EXT3-fs: barriers not enabled
1055[ 1.905420] kjournald starting. Commit interval 5 seconds
1056[ 1.905521] EXT3-fs (sda3): mounted filesystem with writeback data mode
1057[ 1.905605] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
1058[ 1.906790] Freeing unused kernel memory: 648k freed
1059[ 1.906982] Write protecting the kernel read-only data: 12288k
1060[ 1.910593] Freeing unused kernel memory: 1340k freed
1061[ 1.915102] Freeing unused kernel memory: 1740k freed
1062[ 1.917119] usb 7-1: new low speed USB device number 2 using ohci_hcd
1063[ 1.980118] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
1064[ 2.050167] usb 7-1: skipped 1 descriptor after interface
1065[ 2.050174] usb 7-1: skipped 1 descriptor after interface
1066[ 2.052140] usb 7-1: default language 0x0409
1067[ 2.057167] usb 7-1: udev 2, busnum 7, minor = 769
1068[ 2.057173] usb 7-1: New USB device found, idVendor=046d, idProduct=c31d
1069[ 2.057258] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1070[ 2.057342] usb 7-1: Product: USB Keyboard
1071[ 2.057424] usb 7-1: Manufacturer: Logitech
1072[ 2.057656] usb 7-1: usb_probe_device
1073[ 2.057658] usb 7-1: configuration #1 chosen from 1 choice
1074[ 2.062065] usb 7-1: adding 7-1:1.0 (config #1, interface 0)
1075[ 2.064194] usbhid 7-1:1.0: usb_probe_interface
1076[ 2.064195] usbhid 7-1:1.0: usb_probe_interface - got id
1077[ 2.069330] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input2
1078[ 2.069533] generic-usb 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:16.0-1/input0
1079[ 2.069658] usb 7-1: adding 7-1:1.1 (config #1, interface 1)
1080[ 2.072349] usbhid 7-1:1.1: usb_probe_interface
1081[ 2.072350] usbhid 7-1:1.1: usb_probe_interface - got id
1082[ 2.084379] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.1/input/input3
1083[ 2.084580] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:16.0-1/input1
1084[ 2.084704] drivers/usb/core/inode.c: creating file '002'
1085[ 2.084717] hub 7-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
1086[ 2.146103] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
1087[ 2.197033] usb 7-2: new low speed USB device number 3 using ohci_hcd
1088[ 2.260117] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
1089[ 2.330071] usb 7-2: skipped 1 descriptor after interface
1090[ 2.332067] usb 7-2: default language 0x0409
1091[ 2.336156] usb 7-2: udev 3, busnum 7, minor = 770
1092[ 2.336158] usb 7-2: New USB device found, idVendor=046d, idProduct=c05a
1093[ 2.336236] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1094[ 2.336313] usb 7-2: Product: USB Optical Mouse
1095[ 2.336387] usb 7-2: Manufacturer: Logitech
1096[ 2.336545] usb 7-2: usb_probe_device
1097[ 2.336547] usb 7-2: configuration #1 chosen from 1 choice
1098[ 2.338116] usb 7-2: adding 7-2:1.0 (config #1, interface 0)
1099[ 2.338244] usbhid 7-2:1.0: usb_probe_interface
1100[ 2.338246] usbhid 7-2:1.0: usb_probe_interface - got id
1101[ 2.343474] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.0/input/input4
1102[ 2.343703] generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:16.0-2/input0
1103[ 2.343828] drivers/usb/core/inode.c: creating file '003'
1104[ 2.343840] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
1105[ 2.343843] hub 7-0:1.0: port 4, status 0101, change 0001, 12 Mb/s
1106[ 2.437366] kbd_mode used greatest stack depth: 5072 bytes left
1107[ 2.447099] hub 7-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
1108[ 2.454036] ohci_hcd 0000:00:12.0: auto-stop root hub
1109[ 2.454050] ohci_hcd 0000:00:13.0: auto-stop root hub
1110[ 2.488906] loadkeys used greatest stack depth: 3808 bytes left
1111[ 2.489110] init-early.sh used greatest stack depth: 3520 bytes left
1112[ 2.509099] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
1113[ 2.560120] usb 7-4: new full speed USB device number 4 using ohci_hcd
1114[ 2.623024] ohci_hcd 0000:00:16.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
1115[ 2.687021] usb 7-4: ep0 maxpacket = 8
1116[ 2.694113] usb 7-4: default language 0x0409
1117[ 2.700110] usb 7-4: udev 4, busnum 7, minor = 771
1118[ 2.700112] usb 7-4: New USB device found, idVendor=03f0, idProduct=0d17
1119[ 2.700189] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1120[ 2.700265] usb 7-4: Product: hp LaserJet 1012
1121[ 2.700338] usb 7-4: Manufacturer: Hewlett-Packard
1122[ 2.700412] usb 7-4: SerialNumber: 00CNFB840097
1123[ 2.700724] usb 7-4: usb_probe_device
1124[ 2.700726] usb 7-4: configuration #1 chosen from 1 choice
1125[ 2.702069] usb 7-4: adding 7-4:1.0 (config #1, interface 0)
1126[ 2.702216] usblp 7-4:1.0: usb_probe_interface
1127[ 2.702218] usblp 7-4:1.0: usb_probe_interface - got id
1128[ 2.704113] ohci_hcd 0000:00:14.5: auto-stop root hub
1129[ 2.706340] usblp 7-4:1.0: looking for a minor, starting at 0
1130[ 2.706383] usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0D17
1131[ 2.706500] drivers/usb/core/inode.c: creating file '004'
1132[ 2.706511] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0010
1133[ 3.779538] udev[1232]: starting version 164
1134[ 4.219523] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
1135[ 4.219541] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
1136[ 4.219588] r8169 0000:03:00.0: setting latency timer to 64
1137[ 4.219594] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
1138[ 4.219647] r8169 0000:03:00.0: irq 40 for MSI/MSI-X
1139[ 4.220074] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc900125d6000, 50:e5:49:b5:ef:09, XID 0c900800 IRQ 40
1140[ 6.030059] vboxdrv: Found 8 processor cores.
1141[ 6.030093] VBoxDrv: dbg - g_abExecMemory=ffffffffa002c1c0
1142[ 6.030425] vboxdrv: fAsync=0 offMin=0x214 offMax=0x44655
1143[ 6.030463] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
1144[ 6.030464] vboxdrv: Successfully loaded version 4.1.4 (interface 0x00190000).
1145[ 6.063225] it87: Found IT8720F chip at 0x228, revision 8
1146[ 6.063242] it87: Routing internal VCCH to in7
1147[ 6.063246] it87: Beeping is supported
1148[ 6.063550] hwmon_vid: Unknown VRM version of your x86 CPU
1149[ 6.081857] tun: Universal TUN/TAP device driver, 1.6
1150[ 6.081859] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1151[ 6.267726] EXT3-fs (sda3): using internal journal
1152[ 7.563853] Adding 33554428k swap on /dev/sda2. Priority:-1 extents:1 across:33554428k
1153[ 7.749829] r8169 0000:03:00.0: eth0: link down
1154[ 7.749876] r8169 0000:03:00.0: eth0: link down
1155[ 7.750962] ADDRCONF(NETDEV_UP): eth0: link is not ready
1156[ 9.396515] r8169 0000:03:00.0: eth0: link up
1157[ 9.397636] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1158[ 14.049172] mtrr: base(0xf9000000) is not aligned on a size(0xe00000) boundary
1159[ 20.130101] eth0: no IPv6 routers present