· 6 years ago · Oct 01, 2019, 05:38 PM
1welcome to hammerhead bootloader
2[10] Power on reason 91
3[10] DDR: hynix
4[110] Loaded IMGDATA at 0x11000000
5[110] Display Init: Start
6[190] MDP GDSC already enabled
7[190] bpp 24
8[230] Config MIPI_CMD_PANEL.
9[230] display panel: ORISE
10[230] display panel: Default setting
11[360] Turn on MIPI_CMD_PANEL.
12[410] Display Init: Done
13[410] cable type from shared memory: 8
14[410] vibe
15[610] USB init ept @ 0xf96b000
16[630] secured device: 1
17[630] fastboot_init()
18[680] splash: fastboot_op
19 FASTBOOT MODE
20 PRODUCT_NAME - hammerhead
21 VARIANT - hammerhead D821(H) 32GB
22 HW VERSION - rev_11
23 BOOTLOADER VERSION - HHZ20h
24 BASEBAND VERSION - M8974A-2.0.50.2.30
25 CARRIER INFO - None
26 SERIAL NUMBER - 050afacd0a28b527
27 SIGNING - production
28 SECURE BOOT - enabled
29 LOCK STATE - unlocked
30[790] splash: start
31[1820] Fastboot mode started
32[1820] udc_start()
33[2050] -- reset --
34[2060] -- portchange --
35[2130] -- reset --
36[2140] -- portchange --
37[2240] STALL GET_DESCRIPTOR 128 6 1536 0 10
38[2240] STALL GET_DESCRIPTOR 128 6 1536 0 10
39[2250] STALL GET_DESCRIPTOR 128 6 1536 0 10
40[2260] fastboot: processing commands
41[16330] fastboot: getvar:slot-count
42[16430] fastboot: getvar:slot-suffixes
43[16530] fastboot: download:007a2800
44 downloading...
45[25990] fastboot: boot
46[25990] Found Appeneded Flattened Device tree
47[26000] DTB: not supported
48[26000] DTB: Use the first DTB (not found proper DTB)
49[26000] get_display_kcal = 0, 0, 0, x
50[26050] vibe
51[26150] splash: boot
52[26190] splash: unlocked
53[26230] cmdline: console=ttyMSM0,115200,n8 console=tty0 rootwait PMOS_NO_OUTPUT_REDIRECT uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.t
54[26260] Updating device tree: done
55[26260] booting linux @ 0x8000, ramdisk @ 0x2900000 (1757909), tags/device tree @ 0x2700000
56[26270] Turn off MIPI_CMD_PANEL.
57[26270] Continuous splash enabled, keeping panel alive.
58[ 0.000000] Booting Linux on physical CPU 0x0
59[ 0.000000] Linux version 5.2.0-02322-g33fee68163e5 (vinaysimha@vinaysimha-hpg6) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)9
60[ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5787d
61[ 0.000000] CPU: div instructions available: patching division code
62[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
63[ 0.000000] OF: fdt: Machine model: LGE MSM 8974 HAMMERHEAD
64[ 0.000000] Memory policy: Data cache writealloc
65[ 0.000000] cma: Reserved 256 MiB at 0x20000000
66[ 0.000000] percpu: Embedded 20 pages/cpu s52044 r8192 d21684 u81920
67[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 490240
68[ 0.000000] Kernel command line: console=ttyMSM0,115200,n8 console=tty0 rootwait PMOS_NO_OUTPUT_REDIRECT uart_console=enable gpt=enable lg1
69[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
70[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
71[ 0.000000] Memory: 1671652K/1967104K available (8192K kernel code, 835K rwdata, 3528K rodata, 1024K init, 267K bss, 33308K reserved, 2621)
72[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
73[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
74[ 0.000000] Tasks RCU enabled.
75[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
76[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
77[ 0.000000] random: get_random_bytes called from start_kernel+0x304/0x498 with crng_init=0
78[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
79[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
80[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
81[ 0.000016] Switching to timer-based delay loop, resolution 52ns
82[ 0.000416] Console: colour dummy device 80x30
83[ 0.000778] printk: console [tty0] enabled
84[ 0.000813] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
85[ 0.000844] pid_max: default: 32768 minimum: 301
86[ 0.000979] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
87[ 0.001006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
88[ 0.001591] CPU: Testing write buffer coherency: ok
89[ 0.001852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
90[ 0.059957] Setting up static identity map for 0x300000 - 0x300060
91[ 0.079956] rcu: Hierarchical SRCU implementation.
92[ 0.120032] smp: Bringing up secondary CPUs ...
93[ 0.200455] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
94[ 0.280614] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
95[ 0.360773] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
96[ 0.360983] smp: Brought up 1 node, 4 CPUs
97[ 0.361046] SMP: Total of 4 processors activated (153.60 BogoMIPS).
98[ 0.361066] CPU: All CPU(s) started in SVC mode.
99[ 0.362676] devtmpfs: initialized
100[ 0.372433] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
101[ 0.372763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
102[ 0.372802] futex hash table entries: 1024 (order: 4, 65536 bytes)
103[ 0.382633] pinctrl core: initialized pinctrl subsystem
104[ 0.383712] NET: Registered protocol family 16
105[ 0.385549] DMA: preallocated 256 KiB pool for atomic coherent allocations
106[ 0.386697] cpuidle: using governor menu
107[ 0.387323] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
108[ 0.387350] hw-breakpoint: maximum watchpoint size is 8 bytes.
109[ 0.424920] vgaarb: loaded
110[ 0.425421] SCSI subsystem initialized
111[ 0.430985] usbcore: registered new interface driver usbfs
112[ 0.431059] usbcore: registered new interface driver hub
113[ 0.431139] usbcore: registered new device driver usb
114[ 0.432162] Advanced Linux Sound Architecture Driver Initialized.
115[ 0.433207] clocksource: Switched to clocksource arch_sys_counter
116[ 0.801934] NET: Registered protocol family 2
117[ 0.802404] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
118[ 0.802444] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
119[ 0.802510] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
120[ 0.802600] TCP: Hash tables configured (established 8192 bind 8192)
121[ 0.802697] UDP hash table entries: 512 (order: 2, 16384 bytes)
122[ 0.802735] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
123[ 0.802902] NET: Registered protocol family 1
124[ 0.803478] RPC: Registered named UNIX socket transport module.
125[ 0.803501] RPC: Registered udp transport module.
126[ 0.803520] RPC: Registered tcp transport module.
127[ 0.803538] RPC: Registered tcp NFSv4.1 backchannel transport module.
128[ 0.803563] PCI: CLS 0 bytes, default 64
129[ 0.803829] Trying to unpack rootfs image as initramfs...
130[ 0.885035] Freeing initrd memory: 1720K
131[ 0.885869] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
132[ 0.887722] Initialise system trusted keyrings
133[ 0.887925] workingset: timestamp_bits=30 max_order=19 bucket_order=0
134[ 0.894665] NFS: Registering the id_resolver key type
135[ 0.894722] Key type id_resolver registered
136[ 0.894752] Key type id_legacy registered
137[ 0.895624] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
138[ 0.896067] fuse: init (API version 7.31)
139[ 0.898796] Key type asymmetric registered
140[ 0.898829] Asymmetric key parser 'x509' registered
141[ 0.898927] bounce: pool size: 64 pages
142[ 0.899000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
143[ 0.899039] io scheduler mq-deadline registered
144[ 0.899067] io scheduler kyber registered
145[ 0.930500] msm_serial f991d000.serial: msm_serial: detected port #0
146[ 0.930574] msm_serial f991d000.serial: uartclk = 7372800
147[ 0.930656] f991d000.serial: ttyMSM0 at MMIO 0xf991d000 (irq = 27, base_baud = 460800) is a MSM
148[ 0.930720] msm_serial: console setup on port #0
149[ 1.498869] printk: console [ttyMSM0] enabled
150[ 1.504144] msm_serial: driver initialized
151[ 1.529026] brd: module loaded
152[ 1.542044] loop: module loaded
153[ 1.542806] SCSI Media Changer driver v0.25
154[ 1.545643] spmi spmi-0: PMIC arbiter version v1 (0x20000002)
155[ 1.558728] GPIO line 360 (otg-gpio) hogged as output/high
156[ 1.564895] s1: supplied by regulator-dummy
157[ 1.565353] s2: supplied by regulator-dummy
158[ 1.568295] s3: supplied by regulator-dummy
159[ 1.572508] s4: Bringing 5100000uV into 5000000-5000000uV
160[ 1.576620] l1: supplied by regulator-dummy
161[ 1.582190] l2: supplied by regulator-dummy
162[ 1.586215] l3: supplied by regulator-dummy
163[ 1.590353] l4: supplied by regulator-dummy
164[ 1.594544] l5: supplied by regulator-dummy
165[ 1.598699] l6: supplied by regulator-dummy
166[ 1.602851] l7: supplied by regulator-dummy
167[ 1.607057] l8: supplied by regulator-dummy
168[ 1.611196] l9: supplied by regulator-dummy
169[ 1.615402] l10: supplied by regulator-dummy
170[ 1.619534] l11: supplied by regulator-dummy
171[ 1.624084] l12: supplied by regulator-dummy
172[ 1.628311] l13: supplied by regulator-dummy
173[ 1.632565] l14: supplied by regulator-dummy
174[ 1.636858] l15: supplied by regulator-dummy
175[ 1.641082] l16: supplied by regulator-dummy
176[ 1.645359] l17: supplied by regulator-dummy
177[ 1.649594] l18: supplied by regulator-dummy
178[ 1.653864] l19: supplied by regulator-dummy
179[ 1.658100] l20: supplied by regulator-dummy
180[ 1.662354] l21: supplied by regulator-dummy
181[ 1.666639] l22: supplied by regulator-dummy
182[ 1.670877] l23: supplied by regulator-dummy
183[ 1.675154] l24: supplied by regulator-dummy
184[ 1.679367] lvs1: supplied by regulator-dummy
185[ 1.683614] lvs2: supplied by regulator-dummy
186[ 1.687802] lvs3: supplied by regulator-dummy
187[ 1.692356] 5vs1: supplied by s4
188[ 1.696624] 5vs2: supplied by s4
189[ 1.701214] libphy: Fixed MDIO Bus: probed
190[ 1.702963] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
191[ 1.706555] CSLIP: code copyright 1989 Regents of the University of California.
192[ 1.716270] usbcore: registered new interface driver ax88179_178a
193[ 1.723442] usbcore: registered new interface driver cdc_ether
194[ 1.729666] usbcore: registered new interface driver net1080
195[ 1.735427] usbcore: registered new interface driver cdc_subset
196[ 1.741245] usbcore: registered new interface driver cdc_ncm
197[ 1.747108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
198[ 1.752723] ehci-pci: EHCI PCI platform driver
199[ 1.759199] usbcore: registered new interface driver cdc_acm
200[ 1.763500] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
201[ 1.786040] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: registered as rtc0
202[ 1.786313] i2c /dev entries driver
203[ 1.792187] i2c_qup f9923000.i2c:
204[ 1.792187] tx channel not available
205[ 1.796268] i2c_qup f9924000.i2c:
206[ 1.796268] tx channel not available
207[ 1.803527] i2c_qup f9925000.i2c:
208[ 1.803527] tx channel not available
209[ 1.827907] lm3630a_bl 3-0038: LM3630A backlight register OK.
210[ 1.828312] i2c_qup f9968000.i2c:
211[ 1.828312] tx channel not available
212[ 1.834339] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Initializing SMBB rev 3
213[ 1.843778] otg-vbus: supplied by 5vs1
214[ 1.848832] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
215[ 1.851087] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
216[ 1.858534] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
217[ 1.865599] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
218[ 1.873467] sdhci: Secure Digital Host Controller Interface driver
219[ 1.879957] sdhci: Copyright(c) Pierre Ossman
220[ 1.886236] sdhci-pltfm: SDHCI platform and OF driver helper
221[ 1.893782] usbcore: registered new interface driver usbhid
222[ 1.896362] usbhid: USB HID core driver
223[ 1.905861] oprofile: using timer interrupt.
224[ 1.906224] NET: Registered protocol family 17
225[ 1.910071] Key type dns_resolver registered
226[ 1.914783] Registering SWP/SWPB emulation handler
227[ 1.919884] Loading compiled-in X.509 certificates
228[ 2.019787] input: soc:gpio-keys as /devices/platform/soc/soc:gpio-keys/input/input0
229[ 2.020521] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: setting system clock to 1970-01-22T15:04:07 UTC (1868647)
230[ 2.027701] wl-reg: disabling
231[ 2.037815] ALSA device list:
232[ 2.039888] No soundcards found.
233[ 2.043869] Freeing unused kernel memory: 1024K
234[ 2.093456] Run /init as init process
235[ 2.103085] s1: supplied by regulator-dummy
236[ 2.103226] s1: Bringing 0uV into 675000-675000uV
237[ 2.106416] s2: supplied by regulator-dummy
238[ 2.111001] s2: Bringing 0uV into 500000-500000uV
239[ 2.115315] s3: supplied by regulator-dummy
240[ 2.119888] s3: Bringing 0uV into 1050000-1050000uV
241[ 2.124148] s4: supplied by regulator-dummy
242[ 2.128721] s4: Bringing 0uV into 815000-815000uV
243[ 2.133172] s5: supplied by regulator-dummy
244[ 2.138077] s6: supplied by regulator-dummy
245[ 2.142115] s7: supplied by regulator-dummy
246[ 2.146247] s8: supplied by regulator-dummy
247[ 2.150859] s1: supplied by regulator-dummy
248[ 2.154257] s1: Bringing 0uV into 1300000-1300000uV
249[ 2.161524] s2: supplied by regulator-dummy
250[ 2.163384] ocmem fdd00000.ocmem: 8 ports, 3 regions, 2048 macros, interleaved
251[ 2.168757] s2: Bringing 0uV into 2150000-2150000uV
252[ 2.175269] s3: supplied by regulator-dummy
253[ 2.179490] s3: Bringing 0uV into 1800000-1800000uV
254[ 2.186858] l1: supplied by s1
255[ 2.188527] l1: Bringing 0uV into 1225000-1225000uV
256[ 2.192715] l2: supplied by s3
257[ 2.196462] l2: Bringing 0uV into 1200000-1200000uV
258[ 2.199819] l3: supplied by s1
259[ 2.204539] l3: Bringing 0uV into 1225000-1225000uV
260[ 2.207721] l4: supplied by s1
261[ 2.212227] l4: Bringing 0uV into 1225000-1225000uV
262[ 2.215327] mmc0: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using ADMA
263[ 2.221791] l5: supplied by s2
264[ 2.227786] l5: Bringing 0uV into 1800000-1800000uV
265[ 2.230887] l6: supplied by s2
266[ 2.236419] l6: Bringing 0uV into 1800000-1800000uV
267[ 2.239519] l7: supplied by s2
268[ 2.243418] l7: Bringing 0uV into 1800000-1800000uV
269[ 2.246930] l8: supplied by vph-pwr
270[ 2.251290] l8: Bringing 0uV into 1800000-1800000uV
271[ 2.255025] l9: supplied by vreg-boost
272[ 2.259581] l9: Bringing 0uV into 1800000-1800000uV
273[ 2.263746] l10: supplied by vreg-boost
274[ 2.268153] l10: Bringing 0uV into 1800000-1800000uV
275[ 2.272470] l11: supplied by s1
276[ 2.277195] l11: Bringing 0uV into 1300000-1300000uV
277[ 2.280320] l12: supplied by s2
278[ 2.285427] l12: Bringing 0uV into 1800000-1800000uV
279[ 2.288730] l13: supplied by vreg-boost
280[ 2.293383] l13: Bringing 0uV into 1800000-1800000uV
281[ 2.297274] l14: supplied by s2
282[ 2.302118] l14: Bringing 0uV into 1800000-1800000uV
283[ 2.305376] l15: supplied by s2
284[ 2.310180] l15: Bringing 0uV into 2050000-2050000uV
285[ 2.313374] l16: supplied by vph-pwr
286[ 2.318290] l16: Bringing 0uV into 2700000-2700000uV
287[ 2.322299] l17: supplied by vreg-boost
288[ 2.326826] l17: Bringing 0uV into 2850000-2850000uV
289[ 2.330762] l18: supplied by vph-pwr
290[ 2.335563] l18: Bringing 0uV into 2850000-2850000uV
291[ 2.339420] l19: supplied by vph-pwr
292[ 2.344058] l19: Bringing 0uV into 3000000-3000000uV
293[ 2.347951] l20: supplied by vreg-boost
294[ 2.352541] l20: Bringing 0uV into 2950000-2950000uV
295[ 2.356819] l21: supplied by vreg-boost
296[ 2.361317] l21: Bringing 0uV into 2950000-2950000uV
297[ 2.365580] l22: supplied by vreg-boost
298[ 2.370742] l22: Bringing 0uV into 3000000-3000000uV
299[ 2.376140] random: fast init done
300[ 2.376240] l23: supplied by vreg-boost
301[ 2.382504] l23: Bringing 0uV into 3000000-3000000uV
302[ 2.387847] mmc0: new ultra high speed SDR104 SDIO card at address 0001
303[ 2.391502] l24: supplied by vreg-boost
304[ 2.397327] l24: Bringing 0uV into 3075000-3075000uV
305[ 2.401655] lvs1: supplied by s3
306[ 2.406670] lvs2: supplied by s3
307[ 2.409871] lvs3: supplied by s3
308[ 2.413159] 5vs1: supplied by regulator-dummy
309[ 2.416372] 5vs2: supplied by regulator-dummy
310[ 2.463245] mmc1: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA
311[ 2.464567] [drm] using 192m VRAM carveout
312[ 2.532547] msm fd900000.mdss: [drm:msm_drm_bind] VRAM: 20100000->2c100000
313[ 2.532854] msm_mdp fd900100.mdp: [drm:mdp5_bind] MDP5 version v1.2
314[ 2.538426] msm fd900000.mdss: bound fd900100.mdp (ops mdp5_ops)
315[ 2.544742] msm_dsi fd922800.dsi: fd922800.dsi supply gdsc not found, using dummy regulator
316[ 2.551100] msm_dsi fd922800.dsi: fd922800.dsi supply gdsc not found, using dummy regulator
317[ 2.560163] panel-simple-dsi fd922800.dsi.0: fd922800.dsi.0 supply power not found, using dummy regulator
318[ 2.567406] msm fd900000.mdss: bound fd922800.dsi (ops dsi_ops)
319[ 2.577623] adreno fdb00000.adreno: fdb00000.adreno supply vdd not found, using dummy regulator
320[ 2.582969] adreno fdb00000.adreno: fdb00000.adreno supply vddcx not found, using dummy regulator
321[ 2.591457] msm fd900000.mdss: [drm:msm_gpu_init] A330: no IOMMU, fallback to VRAM carveout!
322[ 2.600806] msm fd900000.mdss: [drm:a3xx_gpu_init] *ERROR* No memory protection without IOMMU
323[ 2.608895] msm fd900000.mdss: bound fdb00000.adreno (ops a3xx_ops)
324[ 2.617998] mmc1: new HS200 MMC card at address 0001
325[ 2.624124] mmcblk1: mmc1:0001 SEM32G 29.1 GiB
326[ 2.628856] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
327[ 2.633103] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
328[ 2.652733] msm_mdp fd900100.mdp: [drm:mdp5_kms_init] no iommu, fallback to phys contig buffers for scanout
329[ 2.652806] msm fd900000.mdss: fall back to the other CTL category for INTF 1!
330[ 2.661579] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
331[ 2.669407] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
332[ 2.675917] [drm] Driver supports precise vblank timestamp query.
333[ 2.684037] [drm] Initialized msm 1.5.0 20130625 for fd900000.mdss on minor 0
334[ 2.688784] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
335[ 2.769162] Console: switching to colour frame buffer device 135x120
336[ 2.837581] msm fd900000.mdss: fb0: msmdrmfb frame buffer device