· 6 years ago · Nov 21, 2019, 03:44 AM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
2[ 0.000000] Linux version 5.4.0-rc8 (chewitt@toolbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP Wed Nov 20 18:31:51 UTC 2019
3[ 0.000000] Machine model: Khadas VIM3
4[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000068000000, size 256 MiB
5[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
6[ 0.000000] On node 0 totalpages: 490752
7[ 0.000000] DMA32 zone: 7680 pages used for memmap
8[ 0.000000] DMA32 zone: 0 pages reserved
9[ 0.000000] DMA32 zone: 490752 pages, LIFO batch:63
10[ 0.000000] psci: probing for conduit method from DT.
11[ 0.000000] psci: PSCIv1.0 detected in firmware.
12[ 0.000000] psci: Using standard PSCI v0.2 function IDs
13[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
14[ 0.000000] psci: SMC Calling Convention v1.1
15[ 0.000000] percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016
16[ 0.000000] pcpu-alloc: s48024 r8192 d29800 u86016 alloc=21*4096
17[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
18[ 0.000000] Detected VIPT I-cache on CPU0
19[ 0.000000] CPU features: detected: ARM erratum 845719
20[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483072
21[ 0.000000] Kernel command line: boot=UUID=2011-4011 disk=UUID=eb7b9fd8-2637-4ca1-aa10-3d1e57f36b60 ssh earlyprintk textmode brcmfmac.debug=30 console=ttyAML0,115200n8 console=tty0 mac=c8:63:14:70:41:c1
22[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
23[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
24[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
25[ 0.000000] Memory: 1642348K/1963008K available (9022K kernel code, 796K rwdata, 2856K rodata, 4608K init, 587K bss, 58516K reserved, 262144K cma-reserved)
26[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
27[ 0.000000] rcu: Hierarchical RCU implementation.
28[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
29[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
30[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
31[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
32[ 0.000000] GIC: Using split EOI/Deactivate mode
33[ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
34[ 0.000000] random: get_random_bytes called from start_kernel+0x2a4/0x420 with crng_init=0
35[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
36[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
37[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
38[ 0.000145] Console: colour dummy device 80x25
39[ 0.000346] printk: console [tty0] enabled
40[ 0.000375] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
41[ 0.000391] pid_max: default: 32768 minimum: 301
42[ 0.000514] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
43[ 0.000534] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
44[ 0.000580] *** VALIDATE tmpfs ***
45[ 0.000888] *** VALIDATE proc ***
46[ 0.001056] *** VALIDATE cgroup1 ***
47[ 0.001066] *** VALIDATE cgroup2 ***
48[ 0.001828] ASID allocator initialised with 32768 entries
49[ 0.001892] rcu: Hierarchical SRCU implementation.
50[ 0.003309] smp: Bringing up secondary CPUs ...
51[ 0.003850] Detected VIPT I-cache on CPU1
52[ 0.003893] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
53[ 0.004914] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
54[ 0.004923] Detected VIPT I-cache on CPU2
55[ 0.004959] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
56[ 0.005464] Detected VIPT I-cache on CPU3
57[ 0.005486] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
58[ 0.005960] Detected VIPT I-cache on CPU4
59[ 0.005981] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
60[ 0.006472] Detected VIPT I-cache on CPU5
61[ 0.006494] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
62[ 0.006556] smp: Brought up 1 node, 6 CPUs
63[ 0.006632] SMP: Total of 6 processors activated.
64[ 0.006642] CPU features: detected: 32-bit EL0 Support
65[ 0.006651] CPU features: detected: CRC32 instructions
66[ 0.006868] CPU: All CPU(s) started at EL2
67[ 0.006898] alternatives: patching kernel code
68[ 0.007548] devtmpfs: initialized
69[ 0.014611] Registered cp15_barrier emulation handler
70[ 0.014637] Registered setend emulation handler
71[ 0.014824] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
72[ 0.014848] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
73[ 0.020526] pinctrl core: initialized pinctrl subsystem
74[ 0.021097] NET: Registered protocol family 16
75[ 0.022340] DMA: preallocated 256 KiB pool for atomic allocations
76[ 0.022687] cpuidle: using governor menu
77[ 0.022926] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
78[ 0.036538] cryptd: max_cpu_qlen set to 1000
79[ 0.040774] VSYS_3V3: supplied by DC_IN
80[ 0.041153] iommu: Default domain type: Translated
81[ 0.041418] SCSI subsystem initialized
82[ 0.041559] usbcore: registered new interface driver usbfs
83[ 0.041594] usbcore: registered new interface driver hub
84[ 0.041661] usbcore: registered new device driver usb
85[ 0.041871] mc: Linux media interface: v0.10
86[ 0.041897] videodev: Linux video capture interface: v2.00
87[ 0.041957] pps_core: LinuxPPS API ver. 1 registered
88[ 0.041965] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
89[ 0.042250] Advanced Linux Sound Architecture Driver Initialized.
90[ 0.042880] clocksource: Switched to clocksource arch_sys_counter
91[ 0.042899] *** VALIDATE bpf ***
92[ 0.043104] FS-Cache: Loaded
93[ 0.043114] *** VALIDATE ramfs ***
94[ 0.047111] thermal_sys: Registered thermal governor 'step_wise'
95[ 0.047493] NET: Registered protocol family 2
96[ 0.047877] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
97[ 0.047916] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
98[ 0.048031] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
99[ 0.048232] TCP: Hash tables configured (established 16384 bind 16384)
100[ 0.048346] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
101[ 0.048396] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
102[ 0.048566] NET: Registered protocol family 1
103[ 0.048925] RPC: Registered named UNIX socket transport module.
104[ 0.048940] RPC: Registered udp transport module.
105[ 0.048947] RPC: Registered tcp transport module.
106[ 0.048954] RPC: Registered tcp NFSv4.1 backchannel transport module.
107[ 0.065222] Initialise system trusted keyrings
108[ 0.065366] workingset: timestamp_bits=46 max_order=19 bucket_order=0
109[ 0.070019] squashfs: version 4.0 (2009/01/31) Phillip Lougher
110[ 0.070180] FS-Cache: Netfs 'nfs' registered for caching
111[ 0.070554] NFS: Registering the id_resolver key type
112[ 0.070581] Key type id_resolver registered
113[ 0.070589] Key type id_legacy registered
114[ 0.070603] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
115[ 0.070916] FS-Cache: Netfs 'cifs' registered for caching
116[ 0.071158] Key type cifs.idmap registered
117[ 0.084429] NET: Registered protocol family 38
118[ 0.084453] Key type asymmetric registered
119[ 0.084461] Asymmetric key parser 'x509' registered
120[ 0.084507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
121[ 0.084520] io scheduler mq-deadline registered
122[ 0.084528] io scheduler kyber registered
123[ 0.084657] io scheduler bfq registered
124[ 0.093805] soc soc0: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Detected
125[ 0.094654] pwm-regulator: supplied by regulator-dummy
126[ 0.094823] VCC_3V3: supplied by VSYS_3V3
127[ 0.094859] VCC_1V8: supplied by VCC_3V3
128[ 0.094931] VDDIO_AO1V8: supplied by VSYS_3V3
129[ 0.094966] EMMC_AO1V8: supplied by VCC_3V3
130[ 0.095130] pwm-regulator: supplied by regulator-dummy
131[ 0.096417] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 11, base_baud = 1500000) is a meson_uart
132[ 0.804324] printk: console [ttyAML0] enabled
133[ 0.809046] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 18, base_baud = 1500000) is a meson_uart
134[ 0.818014] serial serial0: tty port ttyAML6 registered
135[ 0.827703] brd: module loaded
136[ 0.827766] loop: module loaded
137[ 0.836732] Loading iSCSI transport class v2.0-870.
138[ 0.836997] iscsi: registered transport (tcp)
139[ 0.841075] libphy: Fixed MDIO Bus: probed
140[ 0.844455] tun: Universal TUN/TAP device driver, 1.6
141[ 0.850224] usbcore: registered new interface driver rtl8150
142[ 0.855577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
143[ 0.861430] ehci-platform: EHCI generic platform driver
144[ 0.866688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
145[ 0.872728] ohci-platform: OHCI generic platform driver
146[ 0.878169] usbcore: registered new interface driver usb-storage
147[ 0.883931] mousedev: PS/2 mouse device common for all mice
148[ 0.889535] i2c /dev entries driver
149[ 0.896091] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
150[ 0.900100] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
151[ 0.910170] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
152[ 0.944194] meson-gx-mmc ffe05000.sd: Got CD GPIO
153[ 0.979391] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
154[ 0.995613] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
155[ 0.999030] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
156[ 1.002978] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
157[ 1.009452] ledtrig-cpu: registered to indicate activity on CPUs
158[ 1.010555] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
159[ 1.012460] meson-sm: secure-monitor enabled
160[ 1.022038] hidraw: raw HID events driver (C) Jiri Kosina
161[ 1.022447] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
162[ 1.023922] mmc1: new high speed SDHC card at address aaaa
163[ 1.024514] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
164[ 1.027572] mmcblk1: p1 p2
165[ 1.029112] usbcore: registered new interface driver usbhid
166[ 1.029112] usbhid: USB HID core driver
167[ 1.031677] NET: Registered protocol family 10
168[ 1.032659] Segment Routing with IPv6
169[ 1.032840] NET: Registered protocol family 17
170[ 1.067155] Key type dns_resolver registered
171[ 1.071482] Loading compiled-in X.509 certificates
172[ 1.080972] VCC_5V: supplied by DC_IN
173[ 1.081113] USB_PWR: supplied by VCC_5V
174[ 1.088141] meson-drm ff900000.vpu: Queued 2 outputs on vpu
175[ 1.089048] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
176[ 1.092920] random: fast init done
177[ 1.095733] [drm] No driver support for vblank timestamp query.
178[ 1.104945] meson-drm ff900000.vpu: CVBS Output connector not available
179[ 1.116524] mmc0: new ultra high speed SDR50 SDIO card at address 0001
180[ 1.142936] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
181[ 1.148012] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
182[ 1.155209] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops 0xffff8000109d8d28)
183[ 1.163495] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
184[ 1.187970] mmc2: new HS200 MMC card at address 0001
185[ 1.189309] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB
186[ 1.192502] mmcblk2boot0: mmc2:0001 AJTD4R partition 1 4.00 MiB
187[ 1.197857] mmcblk2boot1: mmc2:0001 AJTD4R partition 2 4.00 MiB
188[ 1.203597] mmcblk2rpmb: mmc2:0001 AJTD4R partition 3 4.00 MiB, chardev (244:0)
189[ 1.732847] Console: switching to colour frame buffer device 480x135
190[ 1.791051] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
191[ 1.799025] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
192[ 1.804159] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
193[ 1.810331] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
194[ 1.816233] meson8b-dwmac ff3f0000.ethernet: no reset control found
195[ 1.823715] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
196[ 1.829535] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
197[ 1.834690] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
198[ 1.842103] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
199[ 1.849520] meson8b-dwmac ff3f0000.ethernet: COE Type 2
200[ 1.854696] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
201[ 1.861683] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
202[ 1.868081] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
203[ 1.873929] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
204[ 1.879708] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
205[ 1.887715] libphy: stmmac: probed
206[ 1.891477] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
207[ 1.896204] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
208[ 1.903932] dwc2 ff400000.usb: ff400000.usb supply vusb_d not found, using dummy regulator
209[ 1.909582] dwc2 ff400000.usb: ff400000.usb supply vusb_a not found, using dummy regulator
210[ 1.918610] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
211[ 1.924949] dwc3 ff500000.usb: Failed to get clk 'ref': -2
212[ 1.930240] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
213[ 1.935604] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
214[ 1.943273] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
215[ 1.952510] xhci-hcd xhci-hcd.3.auto: irq 27, io mem 0xff500000
216[ 1.958452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
217[ 1.966564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
218[ 1.973719] usb usb1: Product: xHCI Host Controller
219[ 1.978549] usb usb1: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
220[ 1.984156] usb usb1: SerialNumber: xhci-hcd.3.auto
221[ 1.990230] hub 1-0:1.0: USB hub found
222[ 1.992713] hub 1-0:1.0: 2 ports detected
223[ 1.996785] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
224[ 2.002125] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
225[ 2.009690] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
226[ 2.016195] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
227[ 2.024195] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
228[ 2.032372] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
229[ 2.039527] usb usb2: Product: xHCI Host Controller
230[ 2.044356] usb usb2: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
231[ 2.049962] usb usb2: SerialNumber: xhci-hcd.3.auto
232[ 2.054902] hub 2-0:1.0: USB hub found
233[ 2.058505] hub 2-0:1.0: 1 port detected
234[ 2.065098] libphy: mdio_mux: probed
235[ 2.066778] libphy: mdio_mux: probed
236[ 2.070310] printk: console [netcon0] enabled
237[ 2.073782] netconsole: network logging started
238[ 2.078257] hctosys: unable to open rtc device (rtc0)
239[ 2.084219] ALSA device list:
240[ 2.086187] No soundcards found.
241[ 2.092273] Freeing unused kernel memory: 4608K
242[ 2.098948] Run /init as init process
243[ 2.339577] usb 1-1: new high-speed USB device number 2 using xhci-hcd
244[ 2.440116] Checking disk(s): UUID=2011-4011 UUID=eb7b9fd8-2637-4ca1-aa10-3d1e57f36b60
245[ 2.488014] usb 1-1: New USB device found, idVendor=1a40, idProduct=0801, bcdDevice= 1.00
246[ 2.488024] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
247[ 2.488030] usb 1-1: Product: USB 2.0 Hub
248[ 2.528373] hub 1-1:1.0: USB hub found
249[ 2.529792] hub 1-1:1.0: 4 ports detected
250[ 2.937312] fsck: CP437: Invalid argument
251[ 2.937312] fsck: STORAGE: clean, 79/3758080 files, 481524/15029760 blocks
252[ 2.937312] fsck: fsck.fat 4.1 (2017-01-24)
253[ 2.937312] fsck: /dev/mmcblk1p1: 104 files, 8490/65501 clusters
254[ 3.369620] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
255[ 4.022220] systemd[1]: System time before build time, advancing clock.
256[ 4.030033] systemd[1]: systemd 243 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
257[ 4.030219] systemd[1]: Detected architecture arm64.
258[ 4.044841] systemd[1]: Set hostname to <LibreELEC>.
259[ 4.168179] random: systemd: uninitialized urandom read (16 bytes read)
260[ 4.169195] systemd[1]: Created slice User and Session Slice.
261[ 4.169579] random: systemd: uninitialized urandom read (16 bytes read)
262[ 4.169648] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
263[ 4.169831] random: systemd: uninitialized urandom read (16 bytes read)
264[ 4.169875] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
265[ 4.170145] systemd[1]: Reached target Paths.
266[ 4.170276] systemd[1]: Reached target Slices.
267[ 4.192507] systemd[1]: Listening on RPCbind Server Activation Socket.
268[ 4.193089] systemd[1]: Reached target RPC Port Mapper.
269[ 4.414539] kernel-overlays-setup: setup base modules
270[ 4.441465] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.4.0-rc8
271[ 4.448583] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
272[ 4.448666] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
273[ 4.453051] kernel-overlays-setup: done
274[ 4.589509] wireguard: loading out-of-tree module taints kernel.
275[ 4.590691] wireguard: WireGuard 0.0.20191012 loaded. See www.wireguard.com for information.
276[ 4.590695] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
277[ 4.620760] systemd-journald[369]: Received client request to flush runtime journal.
278[ 5.267746] random: crng init done
279[ 5.267752] random: 7 urandom warning(s) missed due to ratelimiting
280[ 5.380862] meson-vrtc ff8000a8.rtc: registered as rtc0
281[ 5.382078] rtc-hym8563 0-0051: no valid clock/calendar values available
282[ 5.382141] rtc-hym8563 0-0051: registered as rtc1
283[ 5.410073] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001e4
284[ 5.410076] Mem abort info:
285[ 5.410077] ESR = 0x96000007
286[ 5.410079] EC = 0x25: DABT (current EL), IL = 32 bits
287[ 5.410080] SET = 0, FnV = 0
288[ 5.410081] EA = 0, S1PTW = 0
289[ 5.410082] Data abort info:
290[ 5.410082] ISV = 0, ISS = 0x00000007
291[ 5.410083] CM = 0, WnR = 0
292[ 5.410085] user pgtable: 4k pages, 48-bit VAs, pgdp=000000005e545000
293[ 5.410086] [00000000000001e4] pgd=000000005e546003, pud=000000005e547003, pmd=000000005e548003, pte=0000000000000000
294[ 5.410091] Internal error: Oops: 96000007 [#1] SMP
295[ 5.414061] Modules linked in: ao_cec_g12a(+) rtc_meson_vrtc rtc_hym8563 input_polldev videobuf2_common wireguard(O) ip6_udp_tunnel udp_tunnel
296[ 5.425956] CPU: 2 PID: 416 Comm: systemd-udevd Tainted: G O 5.4.0-rc8 #1
297[ 5.433972] Hardware name: Khadas VIM3 (DT)
298[ 5.438150] pstate: 60000005 (nZCv daif -PAN -UAO)
299[ 5.442860] pc : regmap_write+0xc/0x70
300[ 5.446894] lr : meson_ao_cec_g12a_adap_enable+0x24/0x118 [ao_cec_g12a]
301[ 5.453118] sp : ffff8000114e3830
302[ 5.457122] x29: ffff8000114e3830 x28: ffff8000114bd000
303[ 5.461656] x27: 0000000000000100 x26: 0000000000000002
304[ 5.466918] x25: ffff8000089920c0 x24: ffff800008991040
305[ 5.472179] x23: ffff000064efcc00 x22: 0000000000000000
306[ 5.477440] x21: ffff00005e759b88 x20: 0000000000000001
307[ 5.482701] x19: ffff00006270fa80 x18: 0000000000000000
308[ 5.487962] x17: 0000000000000000 x16: 0000000000000000
309[ 5.493224] x15: ffff8000114db4e4 x14: ffff000064570d50
310[ 5.498485] x13: 0ca6aace92085622 x12: 0000000000000038
311[ 5.503746] x11: 0101010101010101 x10: fffffe0001595ca0
312[ 5.509008] x9 : 0000000000000000 x8 : 0000000000000060
313[ 5.514269] x7 : 0000000000000400 x6 : 000000000538d35f
314[ 5.519530] x5 : 0000000000000000 x4 : 0000000000000000
315[ 5.524791] x3 : 0000000000000000 x2 : 0000000000000000
316[ 5.530052] x1 : 0000000000000010 x0 : 0000000000000000
317[ 5.535314] Call trace:
318[ 5.539004] regmap_write+0xc/0x70
319[ 5.542696] meson_ao_cec_g12a_adap_enable+0x24/0x118 [ao_cec_g12a]
320[ 5.547307] __cec_s_phys_addr+0x184/0x270
321[ 5.551358] cec_s_phys_addr+0x44/0x60
322[ 5.555068] cec_notifier_cec_adap_register+0x68/0x90
323[ 5.560069] meson_ao_cec_g12a_probe+0xe4/0x3b0 [ao_cec_g12a]
324[ 5.565762] platform_drv_probe+0x50/0xa0
325[ 5.569729] really_probe+0xdc/0x410
326[ 5.573395] driver_probe_device+0xdc/0x130
327[ 5.577405] device_driver_attach+0x6c/0x78
328[ 5.581545] __driver_attach+0x9c/0x168
329[ 5.585340] bus_for_each_dev+0x70/0xc0
330[ 5.589135] driver_attach+0x20/0x28
331[ 5.592815] bus_add_driver+0x190/0x220
332[ 5.596515] driver_register+0x60/0x110
333[ 5.600264] __platform_driver_register+0x44/0x50
334[ 5.604919] meson_ao_cec_g12a_driver_init+0x1c/0x1000 [ao_cec_g12a]
335[ 5.611216] do_one_initcall+0x74/0x1b0
336[ 5.615045] do_init_module+0x50/0x218
337[ 5.618865] load_module+0x1e08/0x2360
338[ 5.622678] __do_sys_finit_module+0xb0/0x110
339[ 5.626740] __arm64_sys_finit_module+0x1c/0x28
340[ 5.631226] el0_svc_common.constprop.1+0x7c/0xe8
341[ 5.635883] el0_svc_compat_handler+0x18/0x20
342[ 5.640194] el0_svc_compat+0x8/0x10
343[ 5.644069] Code: d503201f a9bd7bfd 910003fd a90153f3 (b941e403)
344[ 5.649769] ---[ end trace 84db6b28d8777ea4 ]---
345[ 5.819086] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input1
346[ 5.838896] Registered IR keymap rc-khadas
347[ 5.933153] rtc-hym8563 0-0051: no valid clock/calendar values available
348[ 6.055045] Bluetooth: Core ver 2.22
349[ 6.060058] NET: Registered protocol family 31
350[ 6.060897] cfg80211: Loading compiled-in X.509 certificates for regulatory database
351[ 6.064494] Bluetooth: HCI device and connection manager initialized
352[ 6.075618] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
353[ 6.077268] Bluetooth: HCI socket layer initialized
354[ 6.089187] Bluetooth: L2CAP socket layer initialized
355[ 6.089202] Bluetooth: SCO socket layer initialized
356[ 6.089524] IR NEC protocol handler initialized
357[ 6.115132] brcmfmac: brcmfmac_module_init No platform data available.
358[ 6.115320] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
359[ 6.115375] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input0
360[ 6.115848] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
361[ 6.116521] meson-ir ff808000.ir: receiver initialized
362[ 6.116841] brcmfmac: brcmf_sdio_probe Enter
363[ 6.118695] brcmfmac: F1 signature read @0x18000000=0x17294359
364[ 6.118910] brcmfmac: brcmf_chip_recognition found AXI chip: BCM4359/9
365[ 6.120687] brcmfmac: brcmf_chip_cores_check [1 ] core 0x800:52 base 0x18000000 wrap 0x18100000
366[ 6.120692] brcmfmac: brcmf_chip_cores_check [2 ] core 0x812:59 base 0x18001000 wrap 0x18101000
367[ 6.120695] brcmfmac: brcmf_chip_cores_check [3 ] core 0x83e:8 base 0x18002000 wrap 0x18102000
368[ 6.120697] brcmfmac: brcmf_chip_cores_check [4 ] core 0x83c:21 base 0x18003000 wrap 0x18103000
369[ 6.120698] brcmfmac: brcmf_chip_cores_check [5 ] core 0x812:59 base 0x18004000 wrap 0x18104000
370[ 6.120700] brcmfmac: brcmf_chip_cores_check [6 ] core 0x829:22 base 0x18005000 wrap 0x18105000
371[ 6.120702] brcmfmac: brcmf_chip_cores_check [7 ] core 0x840:5 base 0x1800a000 wrap 0x00000000
372[ 6.120703] brcmfmac: brcmf_chip_cores_check [8 ] core 0x135:0 base 0x00000000 wrap 0x18109000
373[ 6.120704] brcmfmac: brcmf_chip_cores_check [9 ] core 0x240:0 base 0x00000000 wrap 0x00000000
374[ 6.120706] brcmfmac: brcmf_chip_set_passive Enter
375[ 6.121378] brcmfmac: brcmf_chip_get_raminfo RAM: base=0x180000 size=917504 (0xe0000) sr=0 (0x0)
376[ 6.121438] brcmfmac: brcmf_chip_setup ccrev=52, pmurev=26, pmucaps=0x3a0c3f1a
377[ 6.121441] brcmfmac: brcmf_get_module_param Enter, bus=0, chip=17241, rev=9
378[ 6.121452] ------------[ cut here ]------------
379[ 6.121453] max_seg_cnt=3, host_max_seg=3, nents=35
380[ 6.121488] WARNING: CPU: 3 PID: 84 at brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
381[ 6.121490] Modules linked in: btqca brcmfmac btbcm ir_nec_decoder cfg80211 bluetooth brcmutil gpio_pca953x ecdh_generic ecc gpio_keys_polled rc_khadas meson_ir rc_core rfkill ao_cec_g12a(+) rtc_meson_vrtc rtc_hym8563 input_polldev videobuf2_common wireguard(O) ip6_udp_tunnel udp_tunnel
382[ 6.121513] CPU: 3 PID: 84 Comm: kworker/3:1 Tainted: G D O 5.4.0-rc8 #1
383[ 6.121514] Hardware name: Khadas VIM3 (DT)
384[ 6.121520] Workqueue: events brcmf_driver_register [brcmfmac]
385[ 6.121523] pstate: 80000005 (Nzcv daif -PAN -UAO)
386[ 6.121528] pc : brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
387[ 6.121532] lr : brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
388[ 6.121533] sp : ffff8000114cba80
389[ 6.121534] x29: ffff8000114cba80 x28: 0000000000000000
390[ 6.121536] x27: ffff000064eb3000 x26: ffff00005f57d800
391[ 6.121538] x25: ffff800008b2fbc8 x24: ffff00005cb2a400
392[ 6.121539] x23: ffff8000110b8748 x22: ffff00005e40fc00
393[ 6.121541] x21: ffff00005e40fc00 x20: 0000000000000023
394[ 6.121542] x19: ffff00005e40fc00 x18: 00000000fffffff0
395[ 6.121543] x17: 0000000000000000 x16: 0000000000000000
396[ 6.121545] x15: ffff8000110cfcd0 x14: ffff800011180ed0
397[ 6.121546] x13: 0000000000000000 x12: ffff800011180000
398[ 6.121547] x11: ffff8000110cf000 x10: ffff800011180510
399[ 6.121549] x9 : 0000000000000000 x8 : ffff800011189f9b
400[ 6.121550] x7 : 0000000000000000 x6 : 0000000000000001
401[ 6.121551] x5 : 0000000000000000 x4 : 0000000000000001
402[ 6.121552] x3 : 0000000000000007 x2 : 0000000000000006
403[ 6.121553] x1 : 006b86ae6c391500 x0 : 0000000000000000
404[ 6.121555] Call trace:
405[ 6.121560] brcmf_sdiod_sgtable_alloc+0x144/0x150 [brcmfmac]
406[ 6.121564] brcmf_sdio_probe+0x28c/0x890 [brcmfmac]
407[ 6.121568] brcmf_ops_sdio_probe+0x1f0/0x338 [brcmfmac]
408[ 6.121576] sdio_bus_probe+0xa0/0x170
409[ 6.121580] really_probe+0xdc/0x410
410[ 6.121583] driver_probe_device+0xdc/0x130
411[ 6.121584] device_driver_attach+0x6c/0x78
412[ 6.121586] __driver_attach+0x9c/0x168
413[ 6.121588] bus_for_each_dev+0x70/0xc0
414[ 6.121589] driver_attach+0x20/0x28
415[ 6.121591] bus_add_driver+0x190/0x220
416[ 6.121592] driver_register+0x60/0x110
417[ 6.121594] sdio_register_driver+0x24/0x30
418[ 6.121598] brcmf_sdio_register+0x14/0x48 [brcmfmac]
419[ 6.121602] brcmf_driver_register+0xc/0x18 [brcmfmac]
420[ 6.121607] process_one_work+0x1fc/0x388
421[ 6.121608] worker_thread+0x4c/0x4f8
422[ 6.121610] kthread+0x120/0x128
423[ 6.121614] ret_from_fork+0x10/0x18
424[ 6.121615] ---[ end trace 84db6b28d8777ea5 ]---
425[ 6.121618] brcmfmac: brcmf_sdiod_sgtable_alloc nents=35
426[ 6.121621] brcmfmac: brcmf_sdio_kso_init Enter
427[ 6.121635] brcmfmac: brcmf_sdio_drivestrengthinit No SDIO driver strength init needed for chip BCM4359/9 rev 9 pmurev 26
428[ 6.121998] brcmfmac: brcmf_sdio_probe completed!!
429[ 6.122003] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4359-sdio for chip BCM4359/9
430[ 6.122008] brcmfmac: brcmf_fw_get_firmwares enter: dev=mmc0:0001:1
431[ 6.122432] usbcore: registered new interface driver brcmfmac
432[ 6.212905] Bluetooth: HCI UART driver ver 2.3
433[ 6.239748] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
434[ 6.251768] Bluetooth: HCI UART protocol H4 registered
435[ 6.293561] brcmfmac: brcmf_fw_complete_request firmware brcm/brcmfmac4359-sdio.bin found
436[ 6.303145] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
437[ 6.303706] Bluetooth: HCI UART protocol Broadcom registered
438[ 6.303728] Bluetooth: HCI UART protocol QCA registered
439[ 6.309748] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet]
440[ 6.309769] brcmfmac: brcmf_fw_complete_request firmware brcm/brcmfmac4359-sdio.txt found
441[ 6.309772] brcmfmac: brcmf_fw_request_nvram_done enter: dev=mmc0:0001:1
442[ 6.309840] brcmfmac: brcmf_fw_request_nvram_done nvram 000000007040259b len 3564
443[ 6.309843] brcmfmac: brcmf_sdio_firmware_callback Enter: dev=mmc0:0001:1, err=0
444[ 6.323718] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
445[ 6.328392] input: eventlircd as /devices/virtual/input/input2
446[ 7.354894] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
447[ 7.361193] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
448[ 7.367906] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
449[ 7.603622] Bluetooth: hci1: BCM: chip id 121
450[ 7.616116] Bluetooth: hci1: BCM: features 0x0e
451[ 7.617606] Bluetooth: hci1: BCM4359C0
452[ 7.617614] Bluetooth: hci1: BCM4359C0 (003.001.006) build 0000
453[ 8.206959] brcmfmac: brcmf_sdio_download_code_file Enter
454[ 8.272184] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul at 0x00180000; size=636647
455[ 8.299756] Bluetooth: hci1: BCM4359C0 (003.001.006) build 0084
456[ 8.354229] brcmfmac: brcmf_sdio_download_nvram Enter
457[ 8.359730] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul at 0x0025f214; size=3564
458[ 8.367550] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
459[ 8.373550] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x0025f214
460[ 8.382188] brcmfmac: brcmf_sdio_download_firmware: dongle nvram file download failed
461[ 8.389982] brcmfmac: brcmf_sdio_firmware_callback failed: dev=mmc0:0001:1, err=-5
462[ 8.397514] brcmfmac: brcmf_sdio_remove Enter
463[ 8.402641] brcmfmac: brcmf_detach Enter
464[ 8.434899] brcmfmac: brcmf_chip_set_passive Enter
465[ 8.458772] brcmfmac: brcmf_sdio_remove Disconnected
466[ 10.971233] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
467[ 10.974451] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
468[ 11.004871] 8021q: 802.1Q VLAN Support v1.8