CzW0Ztkd

1<6>Booting Linux on physical CPU 0x0
2<6>Initializing cgroup subsys cpuset
3<6>Initializing cgroup subsys cpu
4<6>Initializing cgroup subsys cpuacct
5<6>Initializing cgroup subsys schedtune
6<5>Linux version 4.4.161-PlaceholderRecovery-gdc42615eec1b (arian@home) (Android (4691093 based on r316199) clang version 6.0.2 (based on LLVM 6.0.2svn)) #2 SMP PREEMPT Sun Nov 4 16:51:26 CET 2018
7<6>Boot CPU: AArch64 Processor [51af8014]
8<6>Machine: Qualcomm Technologies, Inc. MSM 8998 v2.1 MTP
9<6>Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 55 MiB
10<6>Reserved memory: reserved region for node 'pil_adsp_region@0x8b200000': base 0x000000008b200000, size 30 MiB
11<6>Reserved memory: reserved region for node 'spss_region@8ab00000': base 0x000000008ab00000, size 7 MiB
12<6>Reserved memory: reserved region for node 'splash_region@9d600000': base 0x000000009d400000, size 36 MiB
13<6>Reserved memory: reserved region for node 'pil_ipa_gpu_region@95600000': base 0x0000000095600000, size 1 MiB
14<6>Reserved memory: reserved region for node 'pil_slpi_region@94700000': base 0x0000000094700000, size 15 MiB
15<6>Reserved memory: reserved region for node 'pil_mba_region@94500000': base 0x0000000094500000, size 2 MiB
16<6>Reserved memory: reserved region for node 'pil_video_region@94000000': base 0x0000000094000000, size 5 MiB
17<6>Reserved memory: reserved region for node 'modem_region@8d000000': base 0x000000008d000000, size 112 MiB
18<6>Reserved memory: reserved region for node 'ramoops_region@b0000000': base 0x00000000b0000000, size 2 MiB
19<6>Reserved memory: allocated memory for 'secure_region' node: base 0x00000000fa000000, size 92 MiB
20<6>Reserved memory: created CMA memory pool at 0x00000000fa000000, size 92 MiB
21<6>Reserved memory: initialized node secure_region, compatible id shared-dma-pool
22<6>Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000f8c00000, size 20 MiB
23<6>Reserved memory: created CMA memory pool at 0x00000000f8c00000, size 20 MiB
24<6>Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
25<6>Reserved memory: allocated memory for 'linux,cma' node: base 0x00000000f6c00000, size 32 MiB
26<6>Reserved memory: created CMA memory pool at 0x00000000f6c00000, size 32 MiB
27<6>Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
28<6>Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000f6400000, size 8 MiB
29<6>Reserved memory: created CMA memory pool at 0x00000000f6400000, size 8 MiB
30<6>Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
31<6>Reserved memory: allocated memory for 'sp_region' node: base 0x00000000f5c00000, size 8 MiB
32<6>Reserved memory: created CMA memory pool at 0x00000000f5c00000, size 8 MiB
33<6>Reserved memory: initialized node sp_region, compatible id shared-dma-pool
34<6>Removed memory: created DMA memory pool at 0x0000000085800000, size 55 MiB
35<6>Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
36<6>Removed memory: created DMA memory pool at 0x000000008ab00000, size 7 MiB
37<6>Reserved memory: initialized node spss_region@8ab00000, compatible id removed-dma-pool
38<6>Removed memory: created DMA memory pool at 0x000000008b200000, size 30 MiB
39<6>Reserved memory: initialized node pil_adsp_region@0x8b200000, compatible id removed-dma-pool
40<6>Removed memory: created DMA memory pool at 0x000000008d000000, size 112 MiB
41<6>Reserved memory: initialized node modem_region@8d000000, compatible id removed-dma-pool
42<6>Removed memory: created DMA memory pool at 0x0000000094000000, size 5 MiB
43<6>Reserved memory: initialized node pil_video_region@94000000, compatible id removed-dma-pool
44<6>Removed memory: created DMA memory pool at 0x0000000094500000, size 2 MiB
45<6>Reserved memory: initialized node pil_mba_region@94500000, compatible id removed-dma-pool
46<6>Removed memory: created DMA memory pool at 0x0000000094700000, size 15 MiB
47<6>Reserved memory: initialized node pil_slpi_region@94700000, compatible id removed-dma-pool
48<6>Removed memory: created DMA memory pool at 0x0000000095600000, size 1 MiB
49<6>Reserved memory: initialized node pil_ipa_gpu_region@95600000, compatible id removed-dma-pool
50<6>Removed memory: created DMA memory pool at 0x00000000b0000000, size 2 MiB
51<6>Reserved memory: initialized node ramoops_region@b0000000, compatible id removed-dma-pool
52<7>On node 0 totalpages: 1504192
53<7>  DMA zone: 11372 pages used for memmap
54<7>  DMA zone: 0 pages reserved
55<7>  DMA zone: 727808 pages, LIFO batch:31
56<7>  Normal zone: 12131 pages used for memmap
57<7>  Normal zone: 776384 pages, LIFO batch:31
58<6>psci: probing for conduit method from DT.
59<6>psci: PSCIv1.0 detected in firmware.
60<6>psci: Using standard PSCI v0.2 function IDs
61<6>psci: MIGRATE_INFO_TYPE not supported.
62<6>psci: Initializing psci_cpu_init
63<6>psci: Initializing psci_cpu_init
64<6>psci: Initializing psci_cpu_init
65<6>psci: Initializing psci_cpu_init
66<6>psci: Initializing psci_cpu_init
67<6>psci: Initializing psci_cpu_init
68<6>psci: Initializing psci_cpu_init
69<6>PERCPU: Embedded 19 pages/cpu @fffffff83d798000 s46168 r0 d31656 u77824
70<7>pcpu-alloc: s46168 r0 d31656 u77824 alloc=19*4096
71<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
72<6>CPU features: enabling workaround for Kryo2xx Silver erratum 845719
73<6>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1480689
74<5>Kernel command line: rcupdate.rcu_expedited=1 console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 earlycon=msm_serial_dm,0xc1b0000 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=2048 androidboot.usbcontroller=a800000.dwc3 androidboot.configfs=true androidboot.selinux=permissive buildvariant=eng androidboot.veritymode=enforcing androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.bootdevice=1da4000.ufshc androidboot.ramdump=disable androidboot.secureboot=1 androidboot.dp=0x0 androidboot.wcnss=1 androidboot.serialno=beacd8ed androidboot.hwversion=1.4.0 androidboot.product.region=cn androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_fhd_r63452_cmd:config2:1:none:cfg:single_dsi
75<6>log_buf_len individual max cpu contribution: 131072 bytes
76<6>log_buf_len total cpu_extra contributions: 917504 bytes
77<6>log_buf_len min size: 131072 bytes
78<6>log_buf_len: 1048576 bytes
79<6>early log buf free: 123608(94%)
80<6>PID hash table entries: 4096 (order: 3, 32768 bytes)
81<6>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
82<6>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
83<6>software IO TLB [mem 0xf5800000-0xf5c00000] (4MB) mapped at [fffffff775800000-fffffff775bfffff]
84<6>Memory: 5659536K/6016768K available (13822K kernel code, 1310K rwdata, 3752K rodata, 4096K init, 1585K bss, 193392K reserved, 163840K cma-reserved)
85<5>Virtual kernel memory layout:
86<5>    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
87<5>    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
88<5>      .init : 0xffffff80acc00000 - 0xffffff80ad000000   (  4096 KB)
89<5>      .text : 0xffffff80aba80000 - 0xffffff80ac800000   ( 13824 KB)
90<5>    .rodata : 0xffffff80ac800000 - 0xffffff80acc00000   (  4096 KB)
91<5>      .data : 0xffffff80ad000000 - 0xffffff80ad147a68   (  1311 KB)
92<5>    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
93<5>              0xffffffbe9b000000 - 0xffffffbea0f63000   (    95 MB actual)
94<5>    fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
95<5>    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
96<5>    memory  : 0xfffffff6c0000000 - 0xfffffff83d8c0000   (  6104 MB)
97<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
98<6>Preemptible hierarchical RCU implementation.
99<6>	RCU dyntick-idle grace-period acceleration is enabled.
100<6>NR_IRQS:64 nr_irqs:64 0
101<4>mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
102<3>MPM 1 irq mapping errored -517
103<6>	Offload RCU callbacks from all CPUs
104<6>	Offload RCU callbacks from CPUs: 0-7.
105<6>Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
106<6>clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
107<6>sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
108<6>clocksource: Switched to clocksource arch_sys_counter
109<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
110<6>pid_max: default: 32768 minimum: 301
111<6>Security Framework initialized
112<6>SELinux:  Initializing.
113<7>SELinux:  Starting in permissive mode
114<6>Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
115<6>Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
116<6>Initializing cgroup subsys freezer
117<6>sched-energy: Sched-energy-costs installed from DT
118<6>ASID allocator initialised with 65536 entries
119<4>NOHZ: local_softirq_pending 02
120<4>NOHZ: local_softirq_pending 02
121<6>Brought up 8 CPUs
122<6>SMP: Total of 8 processors activated.
123<6>CPU features: detected feature: GIC system register CPU interface
124<6>CPU features: detected feature: 32-bit EL0 Support
125<6>CPU: All CPU(s) started at EL1
126<6>alternatives: patching kernel code
127<6>CPU7: update max cpu_capacity 1024
128<6>CPU0: update max cpu_capacity 419
129<6>CPU4: update max cpu_capacity 1024
130<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
131<6>futex hash table entries: 2048 (order: 5, 131072 bytes)
132<6>pinctrl core: initialized pinctrl subsystem
133<6>NET: Registered protocol family 16
134<6>schedtune: init normalization constants...
135<6>schedtune: CLUSTER[0-3]      min_pwr:     0 max_pwr:    66
136<6>schedtune: CPU[0]            min_pwr:     0 max_pwr:   201
137<6>schedtune: CPU[1]            min_pwr:     0 max_pwr:   201
138<6>schedtune: CPU[2]            min_pwr:     0 max_pwr:   201
139<6>schedtune: CPU[3]            min_pwr:     0 max_pwr:   201
140<6>schedtune: CLUSTER[4-7]      min_pwr:     0 max_pwr:   203
141<6>schedtune: CPU[4]            min_pwr:     0 max_pwr:  1683
142<6>schedtune: CPU[5]            min_pwr:     0 max_pwr:  1683
143<6>schedtune: CPU[6]            min_pwr:     0 max_pwr:  1683
144<6>schedtune: CPU[7]            min_pwr:     0 max_pwr:  1683
145<6>schedtune: SYSTEM            min_pwr:     0 max_pwr:  7805
146<6>schedtune: using normalization constants mul: 212959942 sh1: 1 sh2: 12
147<6>schedtune: verify normalization constants...
148<6>schedtune: max_pwr/2^0: 7805 => norm_pwr:  1024
149<6>schedtune: max_pwr/2^1: 3902 => norm_pwr:   511
150<6>schedtune: max_pwr/2^2: 1951 => norm_pwr:   255
151<6>schedtune: max_pwr/2^3:  975 => norm_pwr:   127
152<6>schedtune: max_pwr/2^4:  487 => norm_pwr:    63
153<6>schedtune: max_pwr/2^5:  243 => norm_pwr:    31
154<6>schedtune: configured to support 5 boost groups
155<6>cpuidle: using governor menu
156<6>cpuidle: using governor qcom
157<6>vdso32: 3 pages (2 code @ ffffff80ac806000, 1 data @ ffffff80ad004000)
158<6>vdso: 2 pages (1 code @ ffffff80ac805000, 1 data @ ffffff80ad004000)
159<6>DMA: preallocated 256 KiB pool for atomic allocations
160<3>msm_smem_init: unable to create logging context
161<3>msm_smd_init: unable to create SMD logging context
162<3>msm_smd_init: unable to create SMSM logging context
163<3><CORE> glink_init: unable to create log context
164<3><CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
165<3><CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
166<3><CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
167<3><CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
168<3><CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
169<3>Failed to create IPC log0
170<3>Failed to create IPC log1
171<3>Failed to create IPC log2
172<3>Failed to create IPC log3
173<3>Failed to create IPC log4
174<6>spmi spmi-0: PMIC arbiter version v3 (0x30000000)
175<6>sps:sps is ready.
176<3>(NULL device *): msm_gsi_probe:2879 failed to create IPC log, continue...
177<6>platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
178<6>msm_rpm_dev_probe: APSS-RPM communication over GLINK
179<3><CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
180<3><CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
181<3><CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
182<3><CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
183<6>msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
184<3><CORE> glink_core_register_transport: unable to create log context for [spss:mailbox]
185<6>platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@0x8b200000
186<6>platform 4080000.qcom,mss: assigned reserved memory node modem_region@8d000000
187<6>msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
188<6>msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
189<3>msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
190<6>msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
191<6>platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@94700000
192<6>platform cce0000.qcom,venus: assigned reserved memory node pil_video_region@94000000
193<6>msm_watchdog 17817000.qcom,wdt: wdog absent resource not present
194<6>msm_watchdog 17817000.qcom,wdt: MSM Watchdog Initialized
195<6>platform 1d0101c.qcom,spss: assigned reserved memory node spss_region@8ab00000
196<3>msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
197<4>__of_mpm_init(): MPM driver mapping exists
198<4>irq: no irq domain found for /soc/qcom,mdss_mdp@c900000 !
199<6>i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
200<3>i2c-msm-v2 c179000.i2c: error on clk_get(core_clk):-517
201<3>i2c-msm-v2 c179000.i2c: error probe() failed with err:-517
202<6>i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
203<3>i2c-msm-v2 c17a000.i2c: error on clk_get(core_clk):-517
204<3>i2c-msm-v2 c17a000.i2c: error probe() failed with err:-517
205<6>i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
206<3>i2c-msm-v2 c1b5000.i2c: error on clk_get(core_clk):-517
207<3>i2c-msm-v2 c1b5000.i2c: error probe() failed with err:-517
208<6>i2c-msm-v2 c1b8000.i2c: probing driver i2c-msm-v2
209<3>i2c-msm-v2 c1b8000.i2c: error on clk_get(core_clk):-517
210<3>i2c-msm-v2 c1b8000.i2c: error probe() failed with err:-517
211<4>irq: no irq domain found for /soc/qcom,sde_kms@c900000 !
212<4>irq: no irq domain found for /soc/qcom,hdmi_tx_8998@c9a0000 !
213<6>platform soc:ramoops: assigned reserved memory node ramoops_region@b0000000
214<6>pstore: Registered ramoops as persistent store backend
215<6>ramoops: attached 0x200000@0xb0000000, ecc: 0/0
216<6>pm8998_l24: supplied by pm8998_l12
217<6>msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
218<6>msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
219<3>msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
220<6>msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
221<3>msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
222<6>i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
223<3>i2c-msm-v2 c179000.i2c: error on clk_get(core_clk):-517
224<3>i2c-msm-v2 c179000.i2c: error probe() failed with err:-517
225<6>i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
226<3>i2c-msm-v2 c17a000.i2c: error on clk_get(core_clk):-517
227<3>i2c-msm-v2 c17a000.i2c: error probe() failed with err:-517
228<6>i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
229<3>i2c-msm-v2 c1b5000.i2c: error on clk_get(core_clk):-517
230<3>i2c-msm-v2 c1b5000.i2c: error probe() failed with err:-517
231<6>i2c-msm-v2 c1b8000.i2c: probing driver i2c-msm-v2
232<3>i2c-msm-v2 c1b8000.i2c: error on clk_get(core_clk):-517
233<3>i2c-msm-v2 c1b8000.i2c: error probe() failed with err:-517
234<4>branch_clk_handoff: gcc_mss_mnoc_bimc_axi_clk clock is enabled in HW even though ENABLE_BIT is not set
235<6>qcom,gcc-8998 100000.qcom,gcc: Registered GCC clocks
236<6>qcom,mmsscc-8998 c8c0000.qcom,mmsscc: Registered MMSS clocks.
237<6>qcom,gpucc-8998 5065000.qcom,gpucc: Registered GPU clocks (barring gfx3d clocks)
238<6>msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
239<6>msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
240<3>msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
241<6>msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
242<6>cprh_kbss_read_fuse_data: apc0_pwrcl_corner: speed bin = 2
243<6>cprh_msm8998_kbss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 3
244<6>cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused   LowSVS: open-loop= 608000 uV
245<6>cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused      SVS: open-loop= 656000 uV
246<6>cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused      NOM: open-loop= 808000 uV
247<6>cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO_L1: open-loop= 916000 uV
248<6>cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused   LowSVS: quot[11]= 578
249<6>cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused      SVS: quot[11]= 687, quot_offset[11]= 105
250<6>cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused      NOM: quot[11]=1068, quot_offset[11]= 380
251<6>cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO_L1: quot[11]=1304, quot_offset[11]= 235
252<6>cpr3_regulator_init_ctrl: apc0: Default CPR mode = full HW closed-loop
253<6>cprh_kbss_read_fuse_data: apc1_perfcl_corner: speed bin = 2
254<6>cprh_msm8998_kbss_read_fuse_data: apc1_perfcl_corner: CPR fusing revision = 3
255<6>cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused   LowSVS: open-loop= 636000 uV
256<6>cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused      SVS: open-loop= 636000 uV
257<6>cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused      NOM: open-loop= 788000 uV
258<6>cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused TURBO_L1: open-loop=1036000 uV
259<6>cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fuse corner 1 voltage=636000 uV < fuse corner 0 voltage=644000 uV; overriding: fuse corner 1 voltage=644000
260<6>cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused   LowSVS: quot[11]=1011
261<6>cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused      SVS: quot[11]=1011, quot_offset[11]=   0
262<6>cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused      NOM: quot[11]=1396, quot_offset[11]= 385
263<6>cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused TURBO_L1: quot[11]=1786, quot_offset[11]= 385
264<6>cpr3_regulator_init_ctrl: apc1: Default CPR mode = full HW closed-loop
265<6>cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 2
266<6>cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
267<6>cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 596000 uV
268<6>cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 678000 uV
269<6>cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 812000 uV
270<6>cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop=1004000 uV
271<6>cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
272<6>i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
273<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
274<6>i2c-msm-v2 c179000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
275<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
276<6>i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
277<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
278<6>i2c-msm-v2 c17a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
279<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
280<6>i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
281<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
282<6>i2c-msm-v2 c1b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
283<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
284<6>i2c-msm-v2 c1b8000.i2c: probing driver i2c-msm-v2
285<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
286<6>i2c-msm-v2 c1b8000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
287<3>AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
288<6>gfx3d_clk_src: set OPP pair(257000000 Hz: 656000 uV) on 5000000.qcom,kgsl-3d0
289<6>gfx3d_clk_src: set OPP pair(710000000 Hz: 968000 uV) on 5000000.qcom,kgsl-3d0
290<6>qcom,gfxcc-8998 5065000.qcom,gfxcc: Completed registering all GPU clocks
291<6>cpu-clock-osm 179c0000.qcom,cpu-clock-8998: using pwrcl speed bin 0 and pvs_ver 0
292<6>cpu-clock-osm 179c0000.qcom,cpu-clock-8998: using perfcl speed bin 2 and pvs_ver 0
293<6>add_opp: Set OPP pair (300000000 Hz, 648000 uv) on cpu0
294<6>add_opp: Set OPP pair (1900800000 Hz, 920000 uv) on cpu0
295<6>add_opp: Set OPP pair (300000000 Hz, 648000 uv) on cpu1
296<6>add_opp: Set OPP pair (1900800000 Hz, 920000 uv) on cpu1
297<6>add_opp: Set OPP pair (300000000 Hz, 648000 uv) on cpu2
298<6>add_opp: Set OPP pair (1900800000 Hz, 920000 uv) on cpu2
299<6>add_opp: Set OPP pair (300000000 Hz, 648000 uv) on cpu3
300<6>add_opp: Set OPP pair (1900800000 Hz, 920000 uv) on cpu3
301<6>add_opp: Set OPP pair (300000000 Hz, 644000 uv) on cpu4
302<6>add_opp: Set OPP pair (2457600000 Hz, 1060000 uv) on cpu4
303<6>add_opp: Set OPP pair (300000000 Hz, 644000 uv) on cpu5
304<6>add_opp: Set OPP pair (2457600000 Hz, 1060000 uv) on cpu5
305<6>add_opp: Set OPP pair (300000000 Hz, 644000 uv) on cpu6
306<6>add_opp: Set OPP pair (2457600000 Hz, 1060000 uv) on cpu6
307<6>add_opp: Set OPP pair (300000000 Hz, 644000 uv) on cpu7
308<6>add_opp: Set OPP pair (2457600000 Hz, 1060000 uv) on cpu7
309<6>cpu_clock_osm_driver_probe: OSM driver inited
310<6>msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
311<3>msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
312<6>msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
313<6>msm-thermal soc:qcom,msm-thermal: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,limit-temp. err=-22. KTM continues
314<6>msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
315<6>msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
316<6>socinfo_print: v0.11, id=292, ver=2.1, raw_id=94, raw_ver=2, hw_plat=30, hw_plat_ver=262144
317<6> accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=3 serial_number=2052517373 num_pmics=3
318<3>msm_bus_fabric_init_driver
319<3>msm_bus_dev_init_qos: Skipping QOS init for 1
320<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
321<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
322<4>fab-mnoc supply clk-mdss-ahb-no-rate not found, using dummy regulator
323<4>fab-mnoc supply clk-mdss-axi-no-rate not found, using dummy regulator
324<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
325<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
326<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
327<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
328<3>msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
329<3>msm_bus_dev_init_qos: Skipping QOS init for 727
330<5>SCSI subsystem initialized
331<6>usbcore: registered new interface driver usbfs
332<6>usbcore: registered new interface driver hub
333<6>usbcore: registered new device driver usb
334<4>soc:usb_nop_phy supply vcc not found, using dummy regulator
335<6>qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
336<6>qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
337<6>input: qpnp_pon as /devices/virtual/input/input0
338<6>qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
339<6>qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
340<6>qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
341<6>media: Linux media interface: v0.10
342<6>Linux video capture interface: v2.00
343<6>cpufreq: driver msm up and running
344<6>platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
345<6>platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
346<6>platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node sp_region
347<6>platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
348<6>ION heap system created
349<6>ION heap adsp created at 0x00000000f6400000 with size 800000
350<6>ION heap qsecom created at 0x00000000f8c00000 with size 1400000
351<6>ION heap spss created at 0x00000000f5c00000 with size 800000
352<6>ION heap secure_display created at 0x00000000fa000000 with size 5c00000
353<6>ION heap secure_heap created
354<6>PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
355<6>PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
356<6>PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
357<6>gdsc_vfe0: supplied by gdsc_camss_top
358<6>gdsc_vfe1: supplied by gdsc_camss_top
359<6>gdsc_cpp: supplied by gdsc_camss_top
360<6>gdsc_gpu_gx: supplied by gfx_corner
361<6>mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
362<6>mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
363<3>dp_pll_lock_status: dp_pll_lock_status: C_READY status is not high. Status=0
364<6>mdss_pll_probe: MDSS pll label = MDSS DP PLL
365<3>arm-smmu cd00000.arm,smmu-mmss: found 20 context interrupt(s) but have 17 context banks. assuming 17 context interrupts.
366<6>arm-smmu 5040000.arm,smmu-kgsl: regulator defer delay 80
367<6>iommu: Adding device soc:usb_audio_qmi_dev to group 0
368<6>iommu: Adding device 18800000.qcom,icnss to group 1
369<6>iommu: Adding device soc:iommu_test_device to group 2
370<6>iommu: Adding device soc:iommu_coherent_test_device to group 3
371<6>iommu: Adding device soc:qcom,msm-audio-ion to group 4
372<6>iommu: Adding device c900000.qcom,sde_kms to group 5
373<6>dev-cpufreq: No tables parsed from DT.
374<6>NetLabel: Initializing
375<6>NetLabel:  domain hash size = 128
376<6>NetLabel:  protocols = UNLABELED CIPSOv4
377<6>NetLabel:  unlabeled traffic allowed by default
378<1>pcie:pcie_init.
379<3>pcie_init: unable to create IPC log context for pcie0-short
380<3>pcie_init: unable to create IPC log context for pcie0-long
381<3>pcie_init: unable to create IPC log context for pcie0-dump
382<3>pcie_init: unable to create IPC log context for pcie1-short
383<3>pcie_init: unable to create IPC log context for pcie1-long
384<3>pcie_init: unable to create IPC log context for pcie1-dump
385<3>pcie_init: unable to create IPC log context for pcie2-short
386<3>pcie_init: unable to create IPC log context for pcie2-long
387<3>pcie_init: unable to create IPC log context for pcie2-dump
388<6>qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
389<6>clocksource: Switched to clocksource arch_sys_counter
390<6>NET: Registered protocol family 2
391<6>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
392<6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
393<6>TCP: Hash tables configured (established 65536 bind 65536)
394<6>UDP hash table entries: 4096 (order: 5, 131072 bytes)
395<6>UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
396<6>NET: Registered protocol family 1
397<7>PCI: CLS 0 bytes, default 64
398<6>Trying to unpack rootfs image as initramfs...
399<6>Freeing initrd memory: 12196K
400<6>audit: initializing netlink subsys (disabled)
401<5>audit: type=2000 audit(0.565:1): initialized
402<4>vmscan: error setting kswapd cpu affinity mask
403<5>VFS: Disk quotas dquot_6.6.0
404<6>VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
405<6>[SDFAT] Filesystem version 2.0.8
406<6>Registering sdcardfs 0.1
407<6>fuse init (API version 7.23)
408<7>SELinux:  Registering netfilter hooks
409<6>pfk_ecryptfs [pfk_ecryptfs_init]: PFK ecryptfs inited successfully
410<6>pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
411<6>pfk [pfk_init]: Driver initialized successfully
412<6>io scheduler noop registered
413<6>io scheduler cfq registered (default)
414<3>msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
415<3>mdss_mdp_probe+0x2a4/0x1698->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
416<3>mdss_mdp_irq_clk_register: unable to get clk: throttle_bus_clk
417<3>No change in context(0==0), skip
418<6>mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
419<6>mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
420<6>mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
421<6>mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
422<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:0 ndx:0x40 prio:4
423<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:1 ndx:0x40 prio:4
424<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:0 ndx:0x80 prio:5
425<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:1 ndx:0x80 prio:5
426<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:0 ndx:0x1000 prio:6
427<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:1 ndx:0x1000 prio:6
428<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:13 num:13 rect:0 ndx:0x2000 prio:7
429<6>mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:13 num:13 rect:1 ndx:0x2000 prio:7
430<6>mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:2 num:10 rect:0 ndx:0x400 prio:0
431<6>mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:10 num:11 rect:0 ndx:0x800 prio:1
432<3>mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
433<3>mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
434<3>mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
435<6>xlog_status: enable:0, panic:1, dump:2
436<6>iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 6
437<6>iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 7
438<6>mdss_mdp_probe: mdss version = 0x30000001, bootloader display is on, num 1, intf_sel=0x00000100
439<6>mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
440<6>mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
441<6>mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
442<6>mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_jdi_fhd_r63452_cmd:config2:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_jdi_fhd_r63452_cmd
443<6>mdss_dsi_panel_init: Panel Name = jdi fhd cmd incell dsi panel
444<6>mdss_dsi_parse_split_link_settings: enable 0 sublinks-count 0 lanes per sublink 0
445<6>mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_jdi_fhd_r63452_cmd" (fffffff774e58400)
446<3>mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
447<3>mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
448<4>mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:config2
449<6>mdss_dsi_parse_partial_update_caps: partial_update_enabled=1
450<6>mdss_dsi_parse_panel_features: ulps feature enabled
451<6>mdss_dsi_parse_panel_features: ulps during suspend feature enabled
452<6>mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
453<3>mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
454<3>mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
455<4>mdss_dsi_set_refresh_rate_range:2333, Unable to read min refresh rate
456<4>mdss_dsi_set_refresh_rate_range:2348, Unable to read max refresh rate
457<6>dyn_fps: min = 60, max = 60
458<3>mdss_dsi_parse_ctrl_params:4239 Unable to read qcom,display-id, data=0000000000000000,len=20
459<6>mdss_dsi_parse_gpio_params: bklt_en gpio not specified
460<6>mdss_dsi_parse_gpio_params: avdd_en gpio not specified
461<3>msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
462<3>mdss_dsi_retrieve_ctrl_resources+0x190/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
463<6>mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80083f8000 ctrl_size=400 phy_base=ffffff80083fa400 phy_size=7c0
464<6>dsi_panel_device_register: Continuous splash enabled
465<3>Unable to find fb node for device: c994000.qcom,mdss_dsi_ctrl0
466<6>mdss_register_panel: adding framebuffer device c994000.qcom,mdss_dsi_ctrl0
467<6>mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x20000000, PHY rev:0x3
468<6>mdss_dsi_status_init: DSI status check interval:5000
469<6>mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
470<4>irq 164, desc: fffffff7157a5800, depth: 0, count: 0, unhandled: 0
471<4>->handle_irq():  ffffff80abe4fccc, msm_gpio_irq_handler+0x0/0x148
472<4>->irq_data.chip(): ffffff80ad05fab0, 0xffffff80ad05fab0
473<4>->action(): ffffff80ad0246c0
474<4>->action->handler(): ffffff80abb0b544, bad_chained_irq+0x0/0x48
475<4>   IRQ_NOPROBE set
476<4> IRQ_NOREQUEST set
477<4>  IRQ_NOTHREAD set
478<6>mdss_fb_probe: fb0: split_mode:0 left:0 right:0
479<6>mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
480<6>mdss_fb_probe: fb1: split_mode:0 left:0 right:0
481<6>mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
482<3>mdss_mdp_splash_parse_dt: splash mem child node is not present
483<3>glink_loopback_server_init: unable to create log context
484<3>msm_smp2p_init: unable to create log context
485<6>spcom [spcom_init]: spcom driver version 1.1 17-July-2017.
486<6>spcom [spcom_probe]: Driver Initialization ok.
487<6>subsys-pil-tz soc:qcom,ipa_fws@1e08000: for ipa_fws segments only will be dumped.
488<6>subsys-pil-tz cce0000.qcom,venus: for venus segments only will be dumped.
489<6>subsys-pil-tz 1d0101c.qcom,spss: for spss segments only will be dumped.
490<6>subsys-pil-tz soc:qcom,kgsl-hyp: for a540_zap segments only will be dumped.
491<6>pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
492<4>pil: failed to find qcom,msm-imem-minidump node
493<3>qiib_driver_data_init: unable to create logging context
494<3>uart_tx_gpio is not available
495<3>uart_rx_gpio is not available
496<3>uart_cts_gpio is not available
497<3>uart_rfr_gpio is not available
498<3>msm_serial_hs c171000.uart: msm_hs_probe: error creating logging context
499<3>sps: BAM device 0x000000000c144000 is not registered yet.
500<3>sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000c144000
501<3>sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000c144000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000c144000
502<3>sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000c144000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000c144000
503<6>sps:BAM 0x000000000c144000 is registered.<3>msm_serial_hs c171000.uart: msm_hs_probe: error creating tx logging context
504<3>msm_serial_hs c171000.uart: msm_hs_probe: error creating rx logging context
505<3>msm_serial_hs c171000.uart: msm_hs_probe: error creating usr logging context
506<6>c171000.uart: ttyHS0 at MMIO 0xc171000 (irq = 326, base_baud = 460800) is a MSM HS UART
507<6>msm_serial_hs module loaded
508<3>smd_tty_log_init: Unable to create IPC log
509<5>random: nonblocking pool is initialized
510<3>diag: Unable to initialize POOL_MDM_DCI_WRITE mempool, itemsize: 0 poolsize: 0
511<6>iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 8
512<6>iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 9
513<4>Boeffla WL blocker: driver version 1.1.0 started
514<6>brd: module loaded
515<6>loop: module loaded
516<6>zram: Added device: zram0
517<6>QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
518<4>QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
519<6>QSEECOM: qseecom_probe: no-clock-support=0x1<4>QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
520<4>QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
521<3>i2c-msm-v2 c1b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xc (ok)
522<6>PMIC@SID0: (null) v2.1 options: 0, 0, 0, 0
523<6>I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
524<7>spk-id soc:spk-id-pin@100: spk_id_probe: device soc:spk-id-pin@100
525<7>spk-id soc:rcv-id-pin@11: spk_id_probe: device soc:rcv-id-pin@11
526<6>qce 1de0000.qcedev: Qualcomm Crypto 5.3.4 device found @0x1de0000
527<6>qce 1de0000.qcedev: CE device = 0x0
528<6>IO base, CE = 0xffffff8008d40000
529<6>Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
530<6>IO base BAM = 0x0000000000000000
531<6>BAM IRQ 68
532<6>Engines Availability = 0x2011053
533<3>sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000001dc4000
534<3>sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000001dc4000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000001dc4000
535<3>sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000001dc4000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000001dc4000
536<6>sps:BAM 0x0000000001dc4000 is registered.<6>sps:BAM 0x0000000001dc4000 (va:0xffffff8008ec0000) enabled: ver:0x27, number of pipes:16
537<6>QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 68
538<6>qcrypto 1de0000.qcrypto: Qualcomm Crypto 5.3.4 device found @0x1de0000
539<6>qcrypto 1de0000.qcrypto: CE device = 0x0
540<6>IO base, CE = 0xffffff8009c40000
541<6>Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
542<6>IO base BAM = 0x0000000000000000
543<6>BAM IRQ 68
544<6>Engines Availability = 0x2011053
545<6>QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 68
546<6>qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
547<6>qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
548<6>qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
549<6>qcrypto 1de0000.qcrypto: qcrypto-ecb-des
550<6>qcrypto 1de0000.qcrypto: qcrypto-cbc-des
551<6>qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
552<6>qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
553<6>qcrypto 1de0000.qcrypto: qcrypto-xts-aes
554<6>qcrypto 1de0000.qcrypto: qcrypto-sha1
555<6>qcrypto 1de0000.qcrypto: qcrypto-sha256
556<6>qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
557<6>qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
558<6>qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
559<6>qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
560<6>qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
561<6>qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
562<6>qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
563<6>qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
564<6>qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
565<6>qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
566<6>qcom_ice_get_pdevice: found ice device fffffff773779e00
567<6>qcom_ice_get_pdevice: matching platform device fffffff835433c00
568<3>scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
569<6>ufshcd-qcom 1da4000.ufshc: ufs_qcom_parse_reg_info: Unable to find qcom,vddp-ref-clk-supply regulator, assuming enabled
570<6>scsi host0: ufshcd
571<6>qcom_ice 1db0000.ufsice: QC ICE 3.0.65 device found @0xffffff8008ef0000
572<6>sps:BAM 0x000000000c144000 (va:0xffffff80087c0000) enabled: ver:0x19, number of pipes:18
573<6>Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
574<6>tun: Universal TUN/TAP device driver, 1.6
575<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
576<6>PPP generic driver version 2.4.2
577<6>PPP BSD Compression module registered
578<6>PPP Deflate Compression module registered
579<6>PPP MPPE Compression module registered
580<6>NET: Registered protocol family 24
581<3>msm_sharedmem: sharedmem_register_qmi: Creating sharedmem_qmi qmi handle failed
582<6>msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
583<3>branch_clk_set_rate: Cannot scale gcc_rx1_usb2_clkref_clk clock while HW gating is enabled. Use corresponding hw_ctl_clk to scale it
584<3>msm-dwc3 a800000.ssusb: unable to get dbm device
585<6>usbcore: registered new interface driver usb-storage
586<3>qpnp-pdphy 800f000.qcom,spmi:qcom,pmi8998@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
587<6>mousedev: PS/2 mouse device common for all mice
588<3>ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
589<3>ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
590<5>scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
591<5>scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
592<5>scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
593<5>scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
594<5>scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
595<5>scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
596<5>scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
597<5>scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
598<5>scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUDG8V1EE-B0C1  0400 PQ: 0 ANSI: 6
599<6> sdb: sdb1
600<6> sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17
601<6> sdc: sdc1
602<6> sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6
603<6> sdd: sdd1 sdd2 sdd3 sdd4 sdd5
604<6> sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44
605<3>i2c-msm-v2 c179000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
606<3>synaptics_rmi4_f12_init 2736: fhandler->full_addr.query_base = 0x004c
607<3>synaptics_rmi4_f12_init 2737: fhandler->full_addr.ctrl_base = 0x0012
608<3>synaptics_rmi4_f12_init 2738: size_of_query5 = 9
609<3>synaptics_rmi4_f12_init 2744: size_of_query5 = 9
610<6>input: synaptics_dsx as /devices/soc/c179000.i2c/i2c-5/5-0020/input/input1
611<6>synaptics_dsi_force 5-0020: chip info: 0x53 0x33 0x33 0x33 0x30 0x00 0x00 0x00
612<6>input: uinput-goodix as /devices/virtual/input/input2
613<6>fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_reset
614<6>fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_active
615<6>fpc1020 soc:fingerprint_fpc: found pin control fpc1020_irq_active
616<6>fpc1020 soc:fingerprint_fpc: fpc1020_probe: ok
617<6>fpc1020_init OK
618<6>qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
619<6>i2c /dev entries driver
620<4>peelir_init:npages = 150
621<4>@@@@ peelir_probe, 370
622<4>@@@@ peelir_probe, 385
623<4>peelir_probe: lr-gpio-valid = 1
624<4>peelir_probe:lr_en = 73
625<6>iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 10
626<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [0] = 3072
627<3>,
628<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [1] = 3073
629<3>,CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [2] = 3074
630<3>,
631<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [3] = 3075
632<3>,<6>iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 11
633<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :cpp sid [0] = 2560
634<3>,
635<6>iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 12
636<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :camera_fd sid [0] = 2561
637<3>,
638<6>iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 13
639<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_enc0 sid [0] = 2048
640<3>,
641<6>iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 14
642<3>CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_dma sid [0] = 2049
643<3>,
644<3>CAM-SOC msm_camera_get_reg_base:872 err: mem resource csiphy_clk_mux not found
645<3>csiphy_probe: no mem resource?
646<3>CAM-SOC msm_camera_get_reg_base:872 err: mem resource csiphy_clk_mux not found
647<3>csiphy_probe: no mem resource?
648<3>CAM-SOC msm_camera_get_reg_base:872 err: mem resource csiphy_clk_mux not found
649<3>csiphy_probe: no mem resource?
650<3>msm_actuator_platform_probe:2105 msm_actuator_platform_probe: No/Error Actuator GPIOs
651<3>msm_actuator_platform_probe:2105 msm_actuator_platform_probe: No/Error Actuator GPIOs
652<6>msm_cci_init:1439: hw_version = 0x10060000
653<3>msm_eeprom_platform_probe: sensor_eeprom_name[0] = sagit_imx386_semco, probe success!
654<6>msm_cci_init:1439: hw_version = 0x10060000
655<3>msm_eeprom_platform_probe: sensor_eeprom_name[1] = sagit_s5k3m3_semco, probe success!
656<6>msm_cci_init:1439: hw_version = 0x10060000
657<3>qcom,slave-addr = 0x34
658<3>msm_cci_irq:1803 MASTER_1 error 0x20000000
659<3>msm_cci_wait: 305 wait for queue: 0
660<3>msm_cci_transfer_end: 556 failed rc -110
661<3>msm_cci_data_queue: 811 failed rc -110
662<3>msm_camera_cci_i2c_write: line 136 rc = -110
663<3>read_eeprom_memory: page write failed
664<3>msm_eeprom_platform_probe read_eeprom_memory failed
665<4>qcom,eeprom: probe of ca0c000.qcom,cci:qcom,eeprom@2 failed with error -110
666<6>msm_cci_init:1439: hw_version = 0x10060000
667<3>qcom,slave-addr = 0x34
668<3>msm_cci_irq:1803 MASTER_1 error 0x20000000
669<3>msm_cci_wait: 305 wait for queue: 0
670<3>msm_cci_transfer_end: 556 failed rc -110
671<3>msm_cci_data_queue: 811 failed rc -110
672<3>msm_camera_cci_i2c_write: line 136 rc = -110
673<3>read_eeprom_memory: page write failed
674<3>msm_eeprom_platform_probe read_eeprom_memory failed
675<4>qcom,eeprom: probe of ca0c000.qcom,cci:qcom,eeprom@3 failed with error -110
676<3>msm_ois_platform_probe:1155 msm_ois_platform_probe: 1155: OIS no GPIO control
677<3>OIS SENSOR_SUPPORT_OIS_FLAG true
678<6>MSM-CPP cpp_init_hardware:1144 CPP HW Version: 0x60010000
679<3>MSM-CPP cpp_init_hardware:1162 stream_cnt:0
680<6>MSM-CPP cpp_release_hardware:1225 cpp hw release done
681<3>CAM-SOC msm_camera_get_reg_base:872 err: mem resource vfe_fuse not found
682<3>CAM-SOC msm_camera_get_res_size:915 err: mem resource vfe_fuse not found
683<3>CAM-SOC msm_camera_get_reg_base:872 err: mem resource vfe_fuse not found
684<3>CAM-SOC msm_camera_get_res_size:915 err: mem resource vfe_fuse not found
685<3>__msm_jpeg_init:1537] Jpeg Device id 0
686<3>msm_fd_hw_set_dt_parms_by_name: Error property does not exist
687<6>iommu: Adding device cc00000.qcom,vidc:non_secure_cb to group 15
688<6>iommu: Adding device cc00000.qcom,vidc:firmware_cb to group 16
689<6>iommu: Adding device cc00000.qcom,vidc:secure_bitstream_cb to group 17
690<6>iommu: Adding device cc00000.qcom,vidc:secure_pixel_cb to group 18
691<6>iommu: Adding device cc00000.qcom,vidc:secure_non_pixel_cb to group 19
692<4>c880000.qcom,vmem supply vdd not found, using dummy regulator
693<6>msm_vidc_vmem: Up and running with 4 banks of memory from [io  size 0x8ea8576c9 64bit disabled]
694<6>sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-xin-id : doesn't exist in device tree
695<6>iommu: Adding device c900000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 20
696<6>iommu: Adding device c900000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 21
697<3>No change in context(0==0), skip
698<6>sde_rotator_evtlog_create_debugfs: evtlog_status: enable:0, panic:1, dump:2
699<6>sde_rotator c900000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
700<6>sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
701<6>sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
702<4>thermal thermal_zone0: failed to read out thermal zone (-19)
703<6>QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 3
704<6>msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
705<6>msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
706<6>md: linear personality registered for level -1
707<6>device-mapper: uevent: version 1.0.3
708<6>device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
709<6>device-mapper: req-crypt: dm-req-crypt successfully initalized.
710<6>
711<6>usbcore: registered new interface driver usbhid
712<6>usbhid: USB HID core driver
713<6>ashmem: initialized
714<6>qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
715<6>bimc-bwmon 1008000.qcom,cpu-bwmon: BW HWmon governor registered.
716<3>devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
717<3>probe: Failed to create IPC log context
718<6>hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
719<6>GACT probability NOT on
720<6>Mirror/redirect action on
721<6>u32 classifier
722<6>    Actions configured
723<6>Netfilter messages via NETLINK v0.30.
724<6>nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
725<6>ctnetlink v0.93: registering with nfnetlink.
726<6>xt_time: kernel timezone is -0000
727<6>wireguard: WireGuard 0.0.20181018 loaded. See www.wireguard.com for information.
728<6>wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
729<6>ip_tables: (C) 2000-2006 Netfilter Core Team
730<6>arp_tables: (C) 2002 David S. Miller
731<6>Initializing XFRM netlink socket
732<6>NET: Registered protocol family 10
733<6>mip6: Mobile IPv6
734<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
735<6>sit: IPv6 over IPv4 tunneling driver
736<6>NET: Registered protocol family 17
737<6>NET: Registered protocol family 15
738<6>bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
739<5>Bridge firewalling registered
740<6>Ebtables v2.0 registered
741<6>l2tp_core: L2TP core driver, V2.0
742<6>l2tp_ppp: PPPoL2TP kernel driver, V2.0
743<6>l2tp_ip: L2TP IP encapsulation support (L2TPv3)
744<6>l2tp_netlink: L2TP netlink interface
745<6>l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
746<6>l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
747<6>NET: Registered protocol family 27
748<3>IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
749<6>subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
750<3>sysmon-qmi: sysmon_notifier_register: Notifier register failed for adsp
751<6>subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
752<3>sysmon-qmi: sysmon_notifier_register: Notifier register failed for slpi
753<6>pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
754<6>platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region@94500000
755<3>sysmon-qmi: sysmon_notifier_register: Notifier register failed for modem
756<3>sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a904000
757<3>sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a904000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a904000
758<3>sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a904000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a904000
759<6>sps:BAM 0x000000000a904000 is registered.Invalid index Defaulting curr to 0
760<3>usb_bam_ipa_delete_resources: Failed to delete USB_PROD resource
761<3>usb_bam_ipa_delete_resources: Failed to delete USB_CONS resource
762<4>thermal thermal_zone32: failed to read out thermal zone (-19)
763<3>spmi spmi-0: cleanup_irq apid=58 sid=0x2 per=0x40 irq=2
764<6>FG: fg_gen3_probe: battery SOC:83 voltage: 4096669uV temp: 420 id: 0KOhms
765<3>SMB138X: smb138x_parallel_get_prop: parallel power supply get prop 4 not supported
766<6>SMB138X: smb138x_probe: SMB138X probed successfully mode=1
767<3>FG: fg_psy_get_property: unsupported property 4
768<3>SMB138X: smb138x_get_prop_charger_temp: Couldnt read chg temp at 1th iteration rc = -61
769<3>SMB138X: smb138x_get_prop_connector_health: Couldn't read connector temperature rc=-61
770<3>sps_register_bam_device : unable to create IPC Logging 0 for bam 0x000000000a904000
771<3>sps_register_bam_device : unable to create IPC Logging 1 for bam 0x000000000a904000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x000000000a904000
772<3>sps_register_bam_device : unable to create IPC Logging 3 for bam 0x000000000a904000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x000000000a904000
773<6>sps:BAM 0x000000000a904000 is registered.<3>FG: fg_get_time_to_full_locked: battery profile is not loaded
774<6>msm-dwc3 a800000.ssusb: charger detection in progress
775<5>Registered cp15_barrier emulation handler
776<5>Registered setend emulation handler
777<6>registered taskstats version 1
778<5>Key type encrypted registered
779<3>mdss_mdp_kcal_store_fb0_ctl panel name jdi fhd cmd incell dsi panel
780<3>mdss_mdp_kcal_store_fb0_ctl panel found...
781<6>kcal_ctrl_init: registered
782<6>msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
783<6>spss_utils [spss_init]: spss-utils driver Ver 1.2 13-Jan-2017.
784<6>spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
785<6>fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
786<6>ADSPRPC: gcinfo[0].heap_vmid 6
787<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_cpz_cb1 to group 22
788<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 23
789<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 24
790<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 25
791<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 26
792<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 27
793<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 28
794<6>iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 29
795<3>SMB138X: smb138x_parallel_get_prop: parallel power supply get prop 4 not supported
796<6>input: gpio-keys as /devices/soc/soc:gpio_keys/input/input3
797<6>qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 1970-01-06 13:51:51 UTC (481911)
798<6>lmh_lite:lmh_parse_sensor Registering sensor:[GLM_soc]
799<3>SMB138X: smb138x_get_prop_charger_temp: Couldnt read chg temp at 1th iteration rc = -61
800<6>lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp1-]
801<6>lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp0-]
802<4>soc:qcom,lmh supply vdd-apss not found, using dummy regulator
803<3>lmh_lite:lmh_get_sensor_devicetree Error getting ODCM thresh. err:-22
804<3>SMB138X: smb138x_get_prop_connector_health: Couldn't read connector temperature rc=-61
805<3>parse_cpu_levels: idx 1 503
806<3>parse_cpu_levels: idx 2 1744
807<3>parse_cpu_levels: idx 2 2222
808<3>parse_cpu_levels: idx 1 1301
809<3>parse_cpu_levels: idx 2 1820
810<3>parse_cpu_levels: idx 2 1999
811<3>calculate_residency: residency < 0 for LPM
812<6>qcom,cc-debug-8998 162000.qcom,debugcc: Registered debug mux
813<6>gfx_mem_acc_corner: disabling
814<6>apc0_pwrcl_corner: disabling
815<6>apc1_perfcl_corner: disabling
816<6>fp_d5_vdd_vreg: disabling
817<6>vaf_gpio_supply: disabling
818<6>vana_gpio_supply: disabling
819<6>vdig_gpio_supply: disabling
820<6>regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
821<6>clock_late_init: Removing enables held for handed-off clocks
822<3>Warning: unable to open an initial console.
823<6>Freeing unused kernel memory: 4096K
824<14>init: init first stage started!
825<14>init: First stage mount skipped (recovery mode)
826<14>init: Using Android DT directory /proc/device-tree/firmware/android/
827<14>init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
828<14>init: Loading SELinux policy
829<7>SELinux: 4096 avtab hash slots, 11604 rules.
830<7>SELinux: 4096 avtab hash slots, 11604 rules.
831<7>SELinux:  1 users, 2 roles, 1109 types, 0 bools, 1 sens, 1024 cats
832<7>SELinux:  92 classes, 11604 rules
833<7>SELinux:  Completing initialization.
834<7>SELinux:  Setting up existing superblocks.
835<5>audit: type=1403 audit(481911.544:2): policy loaded auid=4294967295 ses=4294967295
836<14>selinux: SELinux: Loaded policy from /sepolicy
837<14>
838<14>selinux: SELinux: Loaded file_contexts
839<14>
840<14>init: init second stage started!
841<14>init: Using Android DT directory /proc/device-tree/firmware/android/
842<14>selinux: SELinux: Loaded file_contexts
843<14>
844<14>selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.
845<14>
846<14>init: Running restorecon...
847<11>selinux: SELinux:  Could not stat /dev/block: No such file or directory.
848<11>
849<11>init: waitid failed: No child processes
850<12>init: Couldn't load property file: Unable to open '/system/etc/prop.default': No such file or directory: No such file or directory
851<12>init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
852<12>init: Couldn't load property file: Unable to open '/vendor/default.prop': No such file or directory: No such file or directory
853<14>init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
854<14>init: Parsing file /init.rc...
855<14>init: Added '/init.recovery.logd.rc' to import list
856<14>init: Added '/init.recovery.usb.rc' to import list
857<14>init: Added '/init.recovery.service.rc' to import list
858<14>init: Added '/init.recovery.vold_decrypt.rc' to import list
859<14>init: Added '/init.recovery.qcom.rc' to import list
860<11>init: /init.rc: 13: invalid keyword 'setcon'
861<11>init: /init.rc: 62: invalid keyword 'load_all_props'
862<11>init: /init.rc: 100: invalid keyword 'powerctl'
863<14>init: Parsing file /init.recovery.logd.rc...
864<11>init: Unable to open '/init.recovery.logd.rc': No such file or directory
865<11>init: /init.rc: 1: Could not import file '/init.recovery.logd.rc': No such file or directory
866<14>init: Parsing file /init.recovery.usb.rc...
867<14>init: Parsing file /init.recovery.service.rc...
868<14>init: Parsing file /init.recovery.vold_decrypt.rc...
869<11>init: Unable to open '/init.recovery.vold_decrypt.rc': No such file or directory
870<11>init: /init.rc: 4: Could not import file '/init.recovery.vold_decrypt.rc': No such file or directory
871<14>init: Parsing file /init.recovery.qcom.rc...
872<14>init: Parsing file /system/etc/init...
873<11>init: Unable to open '/system/etc/init': No such file or directory
874<14>init: Parsing file /vendor/etc/init...
875<11>init: Unable to open '/vendor/etc/init': No such file or directory
876<14>init: Parsing file /odm/etc/init...
877<11>init: Unable to open '/odm/etc/init': No such file or directory
878<14>init: processing action (early-init) from (/init.rc:7)
879<5>audit: type=1400 audit(481911.551:3): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
880<14>init: starting service 'ueventd'...
881<5>audit: type=1400 audit(481911.551:4): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
882<5>audit: type=1400 audit(481911.551:5): avc:  denied  { write } for  pid=1 comm="init" path="/acct/uid_0/pid_503/cgroup.procs" dev="rootfs" ino=19031 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
883<14>init: processing action (early-init) from (/init.recovery.qcom.rc:28)
884<14>init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
885<5>audit: type=1400 audit(481911.553:6): avc:  denied  { sys_admin } for  pid=503 comm="ueventd" capability=21  scontext=u:r:ueventd:s0 tcontext=u:r:ueventd:s0 tclass=capability permissive=1
886<14>ueventd: ueventd started!
887<14>ueventd: Parsing file /ueventd.rc...
888<14>ueventd: Parsing file /vendor/ueventd.rc...
889<11>ueventd: Unable to open '/vendor/ueventd.rc': No such file or directory
890<14>ueventd: Parsing file /odm/ueventd.rc...
891<11>ueventd: Unable to open '/odm/ueventd.rc': No such file or directory
892<14>ueventd: Parsing file /ueventd.qcom.rc...
893<11>ueventd: /ueventd.qcom.rc: 186: invalid gid 'net_bt_stack'
894<11>ueventd: /ueventd.qcom.rc: 187: invalid gid 'net_bt_stack'
895<14>selinux: SELinux: Loaded file_contexts
896<14>
897<6>of_batterydata_get_best_profile: sagit_atl found
898<3>FG: fg_get_batt_profile: battery fastchg current unavailable, rc:-22
899<3>SMB138X: smb138x_get_prop_charger_temp: Couldnt read chg temp at 1th iteration rc = -61
900<3>SMB138X: smb138x_get_prop_connector_health: Couldn't read connector temperature rc=-61
901<14>selinux: SELinux: Loaded file_contexts
902<14>
903<14>ueventd: Coldboot took 0.438 seconds
904<14>init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 449ms.
905<14>init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
906<14>init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
907<14>init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
908<14>init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
909<14>init: processing action (keychord_init) from (<Builtin Action>:0)
910<14>init: processing action (console_init) from (<Builtin Action>:0)
911<14>init: processing action (init) from (/init.rc:24)
912<14>init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
913<14>init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
914<14>init: processing action (late-init) from (/init.rc:76)
915<14>init: processing action (queue_property_triggers) from (<Builtin Action>:0)
916<14>init: processing action (fs) from (/init.rc:47)
917<14>init: processing action (fs) from (/init.recovery.qcom.rc:31)
918<14>init: Keyring created with id 296773903 in process 1
919<4>FAT-fs (sde41): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
920<14>init: processing action (load_system_props_action) from (/init.rc:65)
921<12>init: Couldn't load property file: Unable to open '/system/build.prop': No such file or directory: No such file or directory
922<12>init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
923<12>init: Couldn't load property file: Unable to open '/vendor/build.prop': No such file or directory: No such file or directory
924<12>init: Couldn't load property file: Unable to open '/factory/factory.prop': No such file or directory: No such file or directory
925<11>init: [libfs_mgr]Error parsing mount_flags
926<11>init: [libfs_mgr]fs_mgr_read_fstab(): failed to load fstab from : '/etc/recovery.fstab'
927<11>init: /recovery not specified in fstab
928<14>init: processing action (load_persist_props_action) from (/init.rc:69)
929<12>init: Couldn't load property file: Unable to open '/data/local.prop': No such file or directory: No such file or directory
930<11>init: Unable to open persistent property directory "/data/property": No such file or directory
931<14>init: processing action (firmware_mounts_complete) from (/init.rc:72)
932<14>init: processing action (boot) from (/init.rc:53)
933<14>init: starting service 'set_permissive'...
934<14>init: starting service 'recovery'...
935<14>init: starting service 'ldconfigtxt'...
936<14>init: processing action (boot) from (/init.recovery.usb.rc:28)
937<6>Mass Storage Function, version: 2009/09/11
938<6>LUN: removable file: (no medium)
939<6>file system registered
940<6>f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
941<6>f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
942<11>init: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
943<14>init: processing action (boot) from (/init.recovery.service.rc:1)
944<14>init: processing action (boot) from (/init.recovery.qcom.rc:99)
945<14>init: processing action (enable_property_trigger) from (<Builtin Action>:0)
946<14>init: processing action (ro.debuggable=1) from (/init.rc:112)
947<14>init: processing action (sys.usb.config=adb) from (/init.recovery.usb.rc:76)
948<14>init: starting service 'adbd'...
949<14>init: processing action (crypto.ready=1) from (/init.recovery.qcom.rc:112)
950<14>init: starting service 'sbinqseecomd'...
951<14>init: processing action (service.adb.root=1) from (/init.rc:118)
952<5>audit: type=1400 audit(481912.022:7): avc:  denied  { write } for  pid=1 comm="init" name="android0" dev="sysfs" ino=28278 scontext=u:r:init:s0 tcontext=u:object_r:sysfs_android_usb:s0 tclass=dir permissive=1
953<11>init: Unable to open '/sys/class/android_usb/android0/enable': Permission denied
954<14>init: Sending signal 9 to service 'adbd' (pid 520) process group...
955<12>init: kill(-520, 9) failed: No such process
956<5>audit: type=1400 audit(481912.023:8): avc:  denied  { write } for  pid=515 comm="touch" name="sbin" dev="rootfs" ino=14259 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
957<5>audit: type=1400 audit(481912.023:9): avc:  denied  { add_name } for  pid=515 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
958<5>audit: type=1400 audit(481912.023:10): avc:  denied  { create } for  pid=515 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
959<12>init: kill(-520, 9) failed: No such process
960<14>init: Successfully killed process cgroup uid 0 pid 520 in 5ms
961<14>init: Service 'ldconfigtxt' (pid 515) exited with status 0
962<14>init: Service 'adbd' (pid 520) killed by signal 9
963<11>init: Unable to open '/sys/class/android_usb/android0/enable': Permission denied
964<6>capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
965<14>init: Service 'set_permissive' (pid 513) exited with status 0
966<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
967<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
968<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
969<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
970<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
971<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
972<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
973<3>scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
974<11>selinux: avc:  denied  { set } for property=sys.listeners.registered pid=523 uid=1000 gid=1000 scontext=u:r:recovery:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=1
975<11>
976<14>init: processing action (sys.listeners.registered=true) from (/init.recovery.qcom.rc:115)
977<14>init: starting service 'hwservicemanager'...
978<14>init: starting service 'keymaster-3-0'...
979<14>init: starting service 'gatekeeper-1-0'...
980<14>init: starting service 'servicemanager'...
981<11>selinux: avc:  denied  { set } for property=twrp.crash_counter pid=514 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
982<11>
983<6>binder: 534:534 ioctl 620a 0 returned -22
984<11>selinux: avc:  denied  { set } for property=hwservicemanager.ready pid=534 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:hwservicemanager_prop:s0 tclass=property_service permissive=1
985<11>
986<3>pp_igc_dither_set_strength: invalid params base_addr 0000000000000000 cfg_data 0000000000000000 block_type 4 igc version 1
987<3>mdss_mdp_cmd_wait4pingpong:wait4pingpong timed out ctl=0 rc=0 cnt=0 koff_cnt=1
988<3>mdss_fb_report_panel_dead: Panel has gone bad, sending uevent - PANEL_ALIVE=0
989<3>__mdss_fb_sync_buf_done_callback: mdp-fence: frame timeout
990<3>WLED OVP fault detected, int_sts=2 fault_sts= 2
991<4>EXT4-fs (sda14): warning: maximal mount count reached, running e2fsck is recommended
992<6>EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: 
993<6>SELinux:  Context u:object_r:mnt_vendor_file:s0 is not valid (left unmapped).
994<6>SELinux:  Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
995<6>EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: 
996<4>EXT4-fs (sda17): warning: maximal mount count reached, running e2fsck is recommended
997<6>EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: 
998<4>EXT4-fs (sda17): warning: maximal mount count reached, running e2fsck is recommended
999<6>EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: 
1000<6>EXT4-fs (sde43): mounted filesystem with ordered data mode. Opts: 
1001<6>EXT4-fs (sde42): mounted filesystem with ordered data mode. Opts: 
1002<4>EXT4-fs (sda14): warning: maximal mount count reached, running e2fsck is recommended
1003<6>EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: 
1004<3>PMI: set_sdp_current: ICL 50000uA isn't supported for SDP
1005<3>PMI: smblib_set_icl_current: Couldn't set SDP ICL rc=-22
1006<6>usbpd usbpd0: Type-C Source (default) connected
1007<6>msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
1008<11>selinux: avc:  denied  { set } for property=sys.usb.config pid=514 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1009<11>
1010<14>init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:67)
1011<11>init: Unable to write to '/config/usb_gadget/g1/UDC': No such device
1012<14>init: processing action (sys.usb.config=mtp,adb) from (/init.recovery.usb.rc:105)
1013<14>init: starting service 'adbd'...
1014<11>init: property_set("ro.boottime.adbd", "3819182236") failed: property already set
1015<14>init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
1016<6>read descriptors
1017<6>read strings
1018<14>init: processing action (sys.usb.config=mtp,adb && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:108)
1019<6>msm-dwc3 a800000.ssusb: Avail curr from USB = 100
1020<6>android_work: sent uevent USB_STATE=CONNECTED
1021<6>android_work: sent uevent USB_STATE=DISCONNECTED
1022<6>android_work: sent uevent USB_STATE=CONNECTED
1023<6>configfs-gadget gadget: high-speed config #1: b
1024<6>msm-dwc3 a800000.ssusb: Avail curr from USB = 500
1025<3>PMI: set_sdp_current: ICL 50000uA isn't supported for SDP
1026<3>PMI: smblib_set_icl_current: Couldn't set SDP ICL rc=-22
1027<6>android_work: sent uevent USB_STATE=CONFIGURED
1028<6>mtp_open