CnmjXb11

1[01-01 00:00:00.000] [0][0: swapper]Initializing cgroup subsys cpuset
2[01-01 00:00:00.000] [0][0: swapper]Initializing cgroup subsys cpu
3[01-01 00:00:00.000] [0][0: swapper]Initializing cgroup subsys cpuacct
4[01-01 00:00:00.000] [0][0: swapper]Linux version 3.18.31-lineageos-g447e97a7ff9-dirty (rocky@Saturn) (gcc version 4.9 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Sun Feb 11 14:30:30 CST 2018
5[01-01 00:00:00.000] [0][0: swapper]CPU: AArch64 Processor [511f2112] revision 2
6[01-01 00:00:00.000] [0][0: swapper]alternatives: detected feature GIC system register CPU interface
7[01-01 00:00:00.000] [0][0: swapper]Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP
8[01-01 00:00:00.000] [0][0: swapper]efi: Getting EFI parameters from F@T:
9[01-01 00:00:00.000] [0][0: swapper]dfi: UEFI not found.
10[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
11[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
12[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
13[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
14[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
15[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'ramoops_region@bfc00000': base 0x00000000bfc00000, size 4 MiB
16[01-01 00:00:00.000] [0][0: swapper]Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
17[01-01 00:00:00.000] [0][0: swapper]Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
18[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
19[01-01 00:00:00.000] [0][0: swapper]Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
20[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
21[01-01 00:00:00.000] [0][0: swapper]Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
22[01-01 00:00:00.000] [0][0: swapper]Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
23[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
24[01-01 00:00:00.000] [0][0: swapper]Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
25[01-01 00:00:00.000] [0][0: swapper]Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
26[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
27[01-01 00:00:00.000] [0][0: swapper]Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
28[01-01 00:00:00.000] [0][0: swapper]Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
29[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node secure_region, compatible id shared-dma-pool
30[01-01 00:00:00.000] [0][0: swapper]Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
31[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
32[01-01 00:00:00.000] [0][0: swapper]ramoops: Removed memory: created ramoops memory pool at 0x00000000bfc00000, size 4 MiB
33[01-01 00:00:00.000] [0][0: swapper]Reserved memory: initialized node ramoops_region@bfc00000, compatible id removed_ramoops_memory
34[01-01 00:00:00.000] [0][0: swapper]cma: Reserved 32 MiB at 0x00000000f6800000
35[01-01 00:00:00.000] [0][0: swapper]psci: probing for conduit method from DT.
36[01-01 00:00:00.000] [0][0: swapper]psci: PSCIv1.0 detected in firmware.
37[01-01 00:00:00.000] K0][0: swapper]psci: Using standard PSCI v0.2 function IDs
38[01-01 00:00:00.000] [0][0: swapper]psci: Initializing psci_cpu_init
39[01-01 00:00:00.000] [0][0: swapper]psci: Initializing psci_cpu_init
40[01-01 00:00:00.000] [0][0: swapper]psci: Initializing psci_cpu_init
41[01-01 00:00:00.000] [0][0: swapper]PERCPU: Embedded 13 pages/cpu @ffffffc0fe305000 s20992 r0 d32256 u53248
42[01-01 00:00:00.000] [0][0: swapper]Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 976326
43[01-01 00:00:00.000] [0][0: swapper]Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 fingerprint_id=0  androidboot.serialno=f19d232a androidboot.baseband=msm sdlog.size=0x00000000 sdlog.addr=0xa0000000 androidboot.mode=normal androidboot.pv-version=0 androidboot.dmverity_disabled=0 androidboot.adbtradefed=0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd:1:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd:cfg:split_dsi
44[01-01 00:00:00.000] [0][0: swapper]fingerprint_id_setup @str:0
45[01-01 00:00:00.000] [0][0: swapper]fingerprint_id =0
46[01-01 00:00:00.000] [0][0: swapper]bootmode_init: KERENEL:boot_mode:NORMAL
47[01-01 00:00:00.000] [0][0: swapper]pv flag: 0 
48[01-01 00:00:00.000] [0][0: swapper]PID hash table entries: 4096 (order: 3, 32768 bytes)
49[01-01 00:00:00.000] [0][0: swapper]Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
50[01-01 00:00:00.000] [0][0: swapper]Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
51[01-01 00:00:00.000] [0][0: swapper]Memory: 3634484K/3967296K available (14479K kernel code, 1837K rwdata, 7224K rodata, 516K init, 4931K bss, 332812K reserved)
52[01-01 00:00:00.000] [0][0: swapper]Virtual kernel memory layout:
53[01-01 00:00:00.000] [0][0: swapper]    vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
54[01-01 00:00:00.000] [0][0: swapper]    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
55[01-01 00:00:00.000] [0][0: swapper]              0xffffffbdc0000000 - 0xffffffbdc3f95400   (    63 MB actual)
56[01-01 00:00:00.000] [0][0: swapper]    PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000   (    16 MB)
57[01-01 00:00:00.000] [0][0: swapper]    fixed   : 0xffffffbffbdfd000 - 0xffffffbffbdff000   (     8 KB)
58[01-01 00:00:00.000] [0][0: swapper]    modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
59[01-01 00:00:00.000] [0][0: swapper]    memory  : 0xffffffc000000000 - 0xffffffc0fe550000   (  4069 MB)
60[01-01 00:00:00.000] [0][0: swapper]      .init : 0xffffffc0015b4000 - 0xffffffc001635000   (   516 KB)
61[01-01 00:00:00.000] [0][0: swapper]      .text : 0xffffffc000080000 - 0xffffffc0015b3cd4   ( 21712 KB)
62[01-01 00:00:00.000] [0][0: swapper]      .data : 0xffffffc001651000 - 0xffffffc00181c400   (  1837 KB)
63[01-01 00:00:00.000] [0][0: swapper]SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
64[01-01 00:00:00.000] [0][0: swapper]HMP scheduling enabled.
65[01-01 00:00:00.000] [0][0: swapper/0]Preemptible hierarchical RCU implementation.
66[01-01 00:00:00.000] [0][0: swapper/0]	RCU dyntick-idle grace-period acceleration is enabled.
67[01-01 00:00:00.000] [0][0: swapper/0]	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
68[01-01 00:00:00.000] [0][0: swapper/0]RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
69[01-01 00:00:00.000] [0][0: swapper/0]NR_IRQS:64 nr_irqs:64 0
70[01-01 00:00:00.000] [0][0: swapper/0]CPU0: found redistributor 0 region 0:0x0000000009c00000
71[01-01 00:00:00.000] [0][0: swapper/0]mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
72[01-01 00:00:00.000] [0][0: swapper/0]MPM 1 irq mapping errored -517
73[01-01 00:00:00.000] [0][0: swapper/0]Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
74[01-01 00:00:00.000] [0][0: swapper/0]sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
75[01-01 00:00:00.000] [0][0: swapper/0]Switched to Clocksource arch_sys_counter
76[01-01 00:00:00.000] [0][0: swapper/0]Console: colkur dummy device 80x25
77[01-01 00:00:00.000] [0][0: swapper/0]console [tty0] enabled
78[01-01 00:00:00.000] [0][0: swapper/0]Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
79[01-01 00:00:00.000] [0][0: swapper/0]pid_max: default: 32768 minimum: 301
80[01-01 00:00:00.000] [0][0: swapper/0]Security Framework initialized
81[01-01 00:00:00.000] [0][0: swapper/0]SELinux:  Initializing.
82[01-01 00:00:00.000] [0][0: swapper/0]Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
83[01-01 00:00:00.000] [0][0: swapper/0]Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
84[01-01 00:00:00.000] [0][0: swapper/0]Initializing cgroup subsys devices
85[01-01 00:00:00.000] [0][0: swapper/0]Initializing cgroup subsys freezer
86[01-01 00:00:00.000] [0][0: swapper/0]Initializing cgroup subsys net_cls
87[01-01 00:00:00.000] [0][0: swapper/0]Initializing cgroup subsys blkio
88[01-01 00:00:00.000] [0][0: swapper/0]Initializing cgroup subsys bfqio
89[01-01 00:00:00.000] [0][0: swapper/0]Initializing cgroup subsys perf_event
90[01-01 00:00:00.000] [0][1: swapper/0]/cpus/cpu@0: Unknown CPU type
91[01-01 00:00:00.000] [0][1: swapper/0]/cpus/cpu@1: Unknown CPU type
92[01-01 00:00:00.000] [0][1: swapper/0]/cpus/cpu@100: Unknown CPU type
93[01-01 00:00:00.000] [0][1: swapper/0]/cpus/cpu@101: Unknown CPU type
94[01-01 00:00:00.000] [0][1: swapper/0]hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
95[01-01 00:00:00.000] [0][1: swapper/0]EFI services will not be available.
96[01-01 00:00:00.000] [0][0: swapper/0]NOHZ: local_softirq_pending 02
97[01-01 00:00:00.000] [0][0: swapper/0]NOHZ: local_softirq_pending 02
98[01-01 00:00:00.000] [0][1: swapper/0]
99[01-01 00:00:00.000] [0][1: swapper/0]**********************************************************
100[01-01 00:00:00.000] [0][1: swapper/0]**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
101[01-01 00:00:00.000] [0][1: swapper/0]**                                                      **
102[01-01 00:00:00.000] [0][1: swapper/0]** trace_printk() being used. Allocating extra memory.  **
103[01-01 00:00:00.000] [0][1: swapper/0]**                                                      **
104[01-01 00:00:00*000] [0][1: swapper/0]** This means that this is a DEBUG kernel and it is     **
105[01-01 00:00:00.000] [0][1: swapper/0]** unsafe for produciton use.                           **
106[01-01 00:00:00.000] [0][1: swapper/0]**                                                      **
107[01-01 00:00:00.000] [0][1: swapper/0]** If you see this message and you are not debugging    **
108[01-01 00:00:00.000] [0][1: swapper/0]** the kernel, report this immediately to your vendor!  **
109[01-01 00:00:00.000] [0][1: swapper/0]**                                                      **
110[01-01 00:00:00.000] [0][1: swapper/0]**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
111[01-01 00:00:00.000] [0][1: swapper/0]**********************************************************
112[01-01 00:00:00.006] [0][1: swapper/0]MSM Memory Dump base table set up
113[01-01 00:00:00.006] [0][1: swapper/0]MSM Memory Dump apps data table set up
114[01-01 00:00:00.006] [0][1: swapper/0]hyp_assign_table is not functional as qcom_secure_mem is not allocated.
115[01-01 00:00:00.006] [0][1: swapper/0]clock-cpu-8996: configuring clocks for the perf cluster
116[01-01 00:00:00.006] [0][1: swapper/0]cpu_clock_8996_early_init: finished CPU clock configuration
117[01-01 00:00:00.010] [1][0: swapper/1]CPU1: found redistributor 1 region 0:0x0000000009c40000
118[01-01 00:00:00.013] [2][0: swapper/2]CPU2: found redistributor 100 region 0:0x0000000009c80000
119[01-01 00:00:00.016] [3][0: swapper/3]CPU3: found redistributor 101 region 0:0x0000000009cc0000
120[01-01 00:00:00.016] [0][1: swapper/0]Brought up 4 CPUs
121[01-01 00:00:00.016] [0][1: swapper/0]SMP: Total of 4 processors activated.
122[01-01 00:00:00.016] [1][1: swapper/0]devtmpfs: initialized
123[01-01 00:00:00.016] [1][1: swapper/0]DMI not present or invalid.
124[01-01 00:00:00.026] [1][1: swapper/0]pinctrl core: initialized pinctrl subsystem
125[01-01 00:00:00.026] [1][1: swapper/0]regulator-dummy: no parameters
126[01-01 00:00:00.086] [1][1: swapper/0]NET: Registered protocol family 16
127[01-01 00:00:00.096] [0][1: swapper/0]cpuidle: using governor ladder
128[01-01 00:00:00.113] [0][1: swapper/0]cpuidle: using governor menu
129[01-01 00:00:00.126] [0][1: swapper/0]cpuidle: using governor qcom
130[01-01 00:00:00.126] [0][1: swapper/0]vdso: 2 pages (1 code @ ffffffc000ea1000, 1 data @ ffffffc001658000)
131[01-01 00:00:00.126] [0][1: swapper/0]software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
132[01-01 00:00:00.126] [0][1: swapper/0]DMA: preallocated 256 KiB pool for atomic allocations
133[01-01 00:00:00.130] [0][1: swapper/0]msm_pm_sleep_status_init: e
134[01-01 00:00:00.143] [0][1: swapper/0]qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
135[01-01 00:00:00.143] [0][1: swapper/0]sps:sps is ready.
136[01-01 00:00:00.146] [0][1: swapper/0]i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
137[01-01 00:00:00.146] [0][1: swapper/0]i2c-msm-v2 7577000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_3/i2c_3_active, deferring probe
138[01-01 00:00:00.146] [0][1: swapper/0]i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
139[01-01 00:00:00.146] [0][1: swapper/0]i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
140[01-01 00:00:00.146] [0][1: swapper/0]i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
141[01-01 00:00:00.146] [0][1: swapper/0]irq: no irq domain found for /soc/pinctrl@01010000 !
142[01-01 00:00:00.150] [0][1: swapper/0]cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
143[01-01 00:00:00.226] [0][1: swapper/0]smd_channel_probe_now: allocation table not initialized
144[01-01 00:00:00.226] [0][1: swapper/0]smd_channel_probe_now: allocation table not initialized
145[01-01 00:00:00.226] [0][1: swapper/0]smd_channel_probe_now: allocation table not initialized
146[01-01 00:00:00.226] [0][1: swapper/0]smd_channel_probe_now: allocation table not initialized
147[01-01 00:00:00.226] [0][1: swapper/0]msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
148[01-01 00:00:00.226] [0][1: swapper/0]msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
149[01-01 00:00:00.226] [0][1: swapper/0]msm_rpm_dev_probe: APSS-RPM communication over GLINK
150[01-01 00:00:00.236] [0][1: swapper/0]spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
151[01-01 00:00:00.236] [0][1: swapper/0]spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
152[01-01 00:00:00.243] [0][1: swapper/0]pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle 
153[01-01 00:00:00.243] [0][1: swapper/0]platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
154[01-01 00:00:00.243] [0][1: swapper/0]platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
155[01-01 00:00:00.246] [0][1: swapper/0]platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
156[01-01 00:00:00.246] [0][1: swapper/0]platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
157[01-01 00:00:00.250] [0][1: swapper/0]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
158[01-01 00:00:00.250] [0][1: swapper/0]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
159[01-01 00:00:00.250] [0][1: swapper/0]msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
160[01-01 00:00:00.250] [0][1: swapper/0]msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
161[01-01 00:00:00.250] [0][1: swapper/0]msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
162[01-01 00:00:00.250] [0][1: swapper/0]msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
163[01-01 00:00:00.250] [0][1: swapper/0]msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
164[01-01 00:00:00.250] [0][1: swapper/0]msm_t`ermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
165[01-01 00:00:00.253] [0][1: swapper/0]platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
166[01-01 00:00:00.260] [0][35: smd_channel_pro]smd_channel_probe_now: allocation table not initialized
167[01-01 00:00:00.260] [2][43: smem_native_rpm]msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
168[01-01 00:00:00.260] [1][1: swapper/0]msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
169[01-01 00:00:00.260] [1][1: swapper/0]msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
170[01-01 00:00:00.260] [1][1: swapper/0]msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
171[01-01 00:00:00.260] [1][1: swapper/0]msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
172[01-01 00:00:00.263] [1][1: swapper/0]ramoops: rmem_ramoops_device_init e
173[01-01 00:00:00.263] [1][1: swapper/0]ramoops: rmem_ramoops_device_init x
174[01-01 00:00:00.263] [1][1: swapper/0]platform soc:qcom,ramoops@8fc00000: assigned reserved memory node ramoops_region@bfc00000
175[01-01 00:00:00.263] [1][1: swapper/0]console [pstore-1] enabled
176[01-01 00:00:00.263] [1][1: swapper/0]pstore: Registered ramoops as persistent store backend
177[01-01 00:00:00.263] [1][1: swapper/0]ramoops: attached 0x400000@0xbfc00000, ecc: 0/0
178[01-01 00:00:00.266] [1][1: swapper/0]apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV 
179[01-01 00:00:00.266] [1][1: swapper/0]apc1_perfcl_mem_acc_corner: 0 <--> 0 mV 
180[01-01 00:00:00.266] [1][1: swapper/0]apcc_l3_mem_acc_corner: 0 <--> 0 mV 
181[01-01 00:00:00.266] [1][1: swapper/0]gfx_mem_acc_corner: 0 <--> 0 mV 
182[01-01 00:00:00.266] [1][1: swapper/0]kryo0-retention: 468 <--> 892 mV at 520 mV 
183[01-01 00:00:00.266] [1][1: swapper/0]kryo0: 468 <--> 892 mV at 754 mV 
184[01-01 00:00:00.266] [1][1: swapper/0]kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
185[01-01 00:00:00.266] [1][1: swapper/0]kryo1-retention: 468 <--> 892 mV at 520 mV 
186[01-01 00:00:00.266] [1][1: swapper/0]kryo1: 468 <--> 892 mV at 754 mV 
187[01-01 00:00:00.266] [1][1: swapper/0]kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
188[01-01 00:00:00.273] [1][1: swapper/0]platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
189[01-01 00:00:00.273] [1][1: swapper/0]msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
190[01-01 00:00:00.293] [1][1: swapper/0]__of_mpm_init(): MPM driver mapping exists
191[01-01 00:00:00.293] [1][1: swapper/0]ZTE_PM_IRQ INT number will be showed if device is waked up by GPIOs
192[01-01 00:00:00.303] [3][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
193[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
194[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
195[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
196[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
197[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
198[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
199[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
200[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
201[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
202[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
203[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: error probe() failed with Err:-517
204[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
205[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
206[01-01 00:00:00.306] [3][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
207[01-01 00:00:00.306] [3][6: deferred_probe_]cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
208[01-01 00:00:00.306] [3][6: deferred_probe_]pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
209[01-01 00:00:00.306] [3][6: deferred_probe_]pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
210[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
211[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle 
212[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
213[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s3: 1300 mV normal idle 
214[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s4: 1800 mV normal idle 
215[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s5: 2150 mV normal idle 
216[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_s7: 800 mV normal idle 
217[01-01 00:00:00.310] [3][6: deferred_probe_]pm8994_l1: 1000 mV normal idle 
218[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l2: 1250 mV normal idle 
219[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l3: 850 mV normal idle 
220[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l4: 1225 mV normal idle 
221[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l6: 1200 mV normal idle 
222[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l8: 1800 mV normal idle 
223[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l9: 1800 mVnormal idle 
224[01-01 00:00:00.313] [3][6: deferred_probe_]pm8994_l10: 1800 mV normal idle 
225[01-01 00:00:00.316] [3][6: deferred_probe_]pm8994_l11: 1150 mV normal idle 
226[01-01 00:00:00.316] [3][6: deferred_probe_]pm8994_l12: 1800 mV normal idle 
227[01-01 00:00:00.316] [3][6: deferred_probe_]pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle 
228[01-01 00:00:00.316] [3][6: deferred_probe_]pm8994_l14: 1800 mV normal idle 
229[01-01 00:00:00.316] [3][6: deferred_probe_]pm8994_l15: 1800 mV normal idle 
230[01-01 00:00:00.316] [3][6: deferred_probe_]pm8994_l16: 2700 mV normal idle 
231[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l17: 2900 mV normal idle 
232[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle 
233[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle 
234[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l19: 3000 mV normal idle 
235[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l20: 2950 mV normal idle 
236[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l21: 2950 mV normal idle 
237[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l22: 3300 mV normal idle 
238[01-01 00:00:00.320] [3][6: deferred_probe_]pm8994_l23: 2800 mV normal idle 
239[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l24: 3075 mV normal idle 
240[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l25: 1200 mV normal idle 
241[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle 
242[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
243[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l27: 1000 mV normal idle 
244[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l28: 925 mV normal idle 
245[01-01 00:00:00.323] [3][6: deferred_probe_]pm8994_l29: 2800 mV normal idle 
246[01-01 00:00:00.326] [3][6: deferred_probe_]pm8994_l30: 1800 mV normal idle 
247[01-01 00:0000.326] [3][6: deferred_probe_]pm8994_l32: 1800 mV normal idle 
248[01-01 00:00:00.326] [3][6: deferred_probe_]pm8994_lvs1: no parameters
249[01-01 00:00:00.326] [3][6: deferred_probe_]pm8994_lvs2: no parameters
250[01-01 00:00:00.326] [3][6: deferred_probe_]pmi8994_s1: 1025 mV normal idle 
251[01-01 00:00:00.326] [3][6: deferred_probe_]pmi8994_boost_5v: no parameters
252[01-01 00:00:00.326] [3][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
253[01-01 00:00:00.326] [3][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
254[01-01 00:00:00.326] [3][6: deferred_probe_]pmi8994_boost_pin_ctrl: no parameters
255[01-01 00:00:00.326] [3][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
256[01-01 00:00:00.326] [3][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
257[01-01 00:00:00.330] [3][6: deferred_probe_]pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle 
258[01-01 00:00:00.330] [3][6: deferred_probe_]pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle 
259[01-01 00:00:00.330] [3][6: deferred_probe_]pm8994_s11_avs_limit: 470 <--> 1140 mV 
260[01-01 00:00:00.330] [3][6: deferred_probe_]spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
261[01-01 00:00:00.330] [3][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
262[01-01 00:00:00.330] [3][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
263[01-01 00:00:00.330] [3][6: deferred_probe_]msm_thermal:sensor_mgr_init_threshold threshold id already initialized
264[01-01 00:00:00.330] [3][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
265[01-01 00:00:00.330] [3][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
266[01-01 00:00:00.330] [3][6: deferred_probe_]msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
267[01-01 00:00:00.330] [3][6: deferred_probe_]msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
268[01-01 00:00:00.330] [3][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
269[01-01 00:00:00.330] [3][6: deferred_probe_]msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
270[01-01 00:00:00.330] [3][6: deferred_probe_]msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
271[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
272[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
273[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
274[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
275[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
276[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
277[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
278[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
279[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
280[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
281[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
282[01-01 00:00:00.333] [3][6: defdrred_probe_]i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
283[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
284[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
285[01-01 00:00:00.333] [3][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
286[01-01 00:00:00.333] [3][6: deferred_probe_]cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
287[01-01 00:00:00.353] [2][6: deferred_probe_]qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
288[01-01 00:00:00.353] [2][6: deferred_probe_]vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
289[01-01 00:00:00.353] [2][6: deferred_probe_]vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
290[01-01 00:00:00.353] [2][6: deferred_probe_]vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
291[01-01 00:00:00.353] [2][6: deferred_probe_]vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
292[01-01 00:00:00.353] [2][6: deferred_probe_]vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
293[01-01 00:00:00.353] [2][6: deferred_probe_]vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
294[01-01 00:00:00.356] [2][6: deferred_probe_]cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
295[01-01 00:00:00.356] [2][6: deferred_probe_]cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
296[01-01 00:00:00.356] [2][6: deferred_probe_]cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
297[01-01 00:00:00.363] [2][6: deferred_probe_]qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
298[01-01 00:00:00.366] [2][6: deferred_probe_]pmi8994_boost_5v: no parameters
299[01-01 00:00:00.366] [2][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
300[01-01 00:00:00.366] [2][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
301[01-01 00:00:00.366] [2][6: deferred_probe_]pmi8994_boost_pin_ctrl: no parameters
302[01-01 00:00:00.366] [2][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:r0m-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
303[01-01 00:00:00.366] [2][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
304[01-01 00:00:00.366] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
305[01-01 00:00:00.366] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
306[01-01 00:00:00.366] [2][6: deferred_probe_]msm_thermal:sensor_mgr_init_threshold threshold id already initialized
307[01-01 00:00:00.370] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
308[01-01 00:00:00.370] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
309[01-01 00:00:00.370] [2][6: deferred_probe_]msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
310[01-01 00:00:00.370] [2][6: deferred_probe_]msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
311[01-01 00:00:00.370] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
312[01-01 00:00:00.370] [2][6: deferred_probe_]msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
313[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
314[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
315[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
316[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
317[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
318[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 3
319[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
320[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
321[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused    SVS: open-loop= 685000 uV
322[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused    NOM: open-loop= 785000 uV
323[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused  TURBO: open-loop= 890000 uV
324[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 329
325[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused    SVS: quot[ 7]= 519, quot_offset[ 7]= 145
326[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused    NOM: quot[ 7]= 733, quot_offset[ 7]= 210
327[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused  TURBO: quot[ 7]= 935, quot_offset[ 7]= 200
328[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
329[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
330[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
331[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
332[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
333[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 3
334[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 585000 uV
335[01-01 00:00:00.370] [2][6: deferred_probe_]cpr_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    SVS: open-loop= 685000 uV
336[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused    NOM: open-loop= 785000 uV
337[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused  TURBO: open-loop= 890000 uV
338[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 329
339[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused    SVS: quot[ 7]= 519, quot_offset[ 7]= 145
340[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused    NOM: quot[ 7]= 733, quot_offset[ 7]= 210
341[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused  TURBO: quot[ 7]= 935, quot_offset[ 7]= 200
342[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
343[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
344[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
345[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
346[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limItation = none
347[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 3
348[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
349[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 585000 uV
350[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused    SVS: open-loop= 655000 uV
351[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused    NOM: open-loop= 715000 uV
352[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused  TURBO: open-loop= 960000 uV
353[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 329
354[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    SVS: quot[ 7]= 452, quot_offset[ 7]=  80
355[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    NOM: quot[ 7]= 582, quot_offset[ 7]= 130
356[01-01 00:00:00.370] [2][6: deferred_probe_]cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused  TURBO: quot[ 7]=1063, quot_offset[ 7]= 480
357[01-01 00:00:00.373] [2][6: deferred_probe_]cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
358[01-01 00:00:00.373] [2][6: deferred_probe_]apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV 
359[01-01 00:00:00.373] [2][6: deferred_probe_]apc0_cbf_corner: 0 <--> 0 mV at 0 mV 
360[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_regulator_measure_aging: apcc: average quotient delta=3 (count=10)
361[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
362[01-01 00:00:00.376] [3][6: deferred_probe_]apc1_corner: 0 <--> 0 mV at 0 mV 
363[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
364[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
365[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 630000 uV
366[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
367[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 795000 uV
368[01-01 00:00:00.376] [3][6: deferred_probe_]cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 885000 uV
369[01-01 00:00:00.380] [3][6: deferred_probe_]cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
370[01-01 00:00:00.380] [3][6: deferred_probe_]gfx_corner: 0 <--> 0 mV at 0 mV 
371[01-01 00:00:00.380] [2][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
372[01-01 00:00:00.380] [2][6: deferred_probe_]AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
373[01-01 00:00:00.380] [2][6: deferred_probe_]i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
374[01-01 00:00:00.380] [2][6: deferred_probe_]i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
375[01-01 00:00:00.380] [2][6: deferred_probe_]AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
376[01-01 00:00:00.380] [2][6: deferred_probe_]i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
377[01-01 00:00:00.383] [2][6: deferred_probe_]i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
378[01-01 00:00:00.383] [2][6: deferred_probe_]AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
379[01-01 00:00:00.383] [2][6: deferred_probe_]i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
380[01-01 00:00:00.383] [2][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
381[01-01 00:00:00.383] [2][6: deferred_probe_]AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
382[01-01 00:00:00.383] [2][6: deferred_probe_]i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
383[01-01 00:00:00.383] [2][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
384[01-01 00:00:00.383] [2][6: deferred_probe_]AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
385[01-01 00:00:00.383] [2][6: deferred_probe_]i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
386[01-01 00:00:00.386] [2][6: deferred_probe_]cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
387[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu0
388[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (1593600000 Hz, 865000 uv) on cpu0
389[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu1
390[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (1593600000 Hz, 865000 uv) on cpu1
391[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu2
392[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (2150400000 Hz, 945000 uv) on cpu2
393[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu3
394[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (2150400000 Hz, 945000 uv) on cpu3
395[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
396[01-01 00:00:00.386] [2][6: deferred_probe_]clock-cpu-8996: set OPP pair (1593600000 Hz, 865000 uv) on soc:qcom,m4m
397[01-01 00:00:00.390] [2][6: deferred_probe_]qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
398[01-01 00:00:00.390] [2][6: deferred_probe_]gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
399[01-01 00:00:00.390] [2][6: deferred_probe_]gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 885000 uV) on b00000.qcom,kgsl-3d0
400[01-01 00:00:00.390] [2][6: deferred_probe_]qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
401[01-01 00:00:00.390] [2][6: deferred_probe_]pmi8994_boost_5v: no parameters
402[01-01 00:00:00.390] [2][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
403[01-01 00:00:00.390] [2][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
404[01-01 00:00:00.390] [2][6: deferred_probe_]pmi8994_boost_pin_ctrl: no parameters
405[01-01 00:00:00.390] [2][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
406[01-01 00:00:00.390] [2][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
407[01-01 00:00:00.393] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
408[01-01 00:00:00.393] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
409[01-01 00:00:00.393] [2][6: deferred_probe_]msm_thermal:sensor_mgr_init_threshold threshold id already initialized
410[01-01 00:00:00.393] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
411[01-01 00:00:00.393] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
412[01-01 00:00:00.393] [2][6: deferred_probe_]msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
413[01-01 00:00:00.393] [2][6: deferred_probe_]msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
414[01-01 00:00:00.393] [2][6: deferred_probe_]msm_thermalupdate_cpu_freq Unable to update policy for cpu:2. err:-19
415[01-01 00:00:00.393] [2][6: deferred_probe_]msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
416[01-01 00:00:00.393] [2][17: check_temp+0x0/]msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
417[01-01 00:00:00.393] [2][17: check_temp+0x0/]msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
418[01-01 00:00:00.393] [2][17: check_temp+0x0/]msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
419[01-01 00:00:00.393] [3][6: deferred_probe_]pmi8994_boost_5v: no parameters
420[01-01 00:00:00.393] [3][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
421[01-01 00:00:00.393] [3][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
422[01-01 00:00:00.393] [3][6: deferred_probe_]pmi8994_boost_pin_ctrl: no parameters
423[01-01 00:00:00.393] [3][6: deferred_probe_]qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
424[01-01 00:00:00.393] [3][6: deferred_probe_]rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
425[01-01 00:00:00.433] [3][1: swapper/0]KPI: Bootloader start count = 44015
426[01-01 00:00:00.433] [3][1: swapper/0]KPI: Bootloader end count = 281268
427[01-01 00:00:00.433] [3][1: swapper/0]KPI: Bootloader display count = 267720
428[01-01 00:00:00.433] [3][1: swapper/0]KPI: Bootloader load kernel count = 1888
429[01-01 00:00:00.433] [3][1: swapper/0]KPI: Kernel MPM timestamp = 305106
430[01-01 00:00:00.433] [3][1: swapper/0]KPI: Kernel MPM Clock frequency = 32768
431[01-01 00:00:00.433] [3][1: swapper/0]socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=1, hw_plat_ver=65536
432[01-01 00:00:00.433] [3][1: swapper/0] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=3585287657 num_pmics=2
433[01-01 00:00:00.433] [3][1: swapper/0]gdsc_mmagic_bimc: no parameters
434[01-01 00:00:00.433] [3][1: swapper/0]usb_otg_vreg: no parameters
435[01-01 00:00:00.433] [3][1: swapper/0]reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
436[01-01 00:00:00.433] [3][1: swapper/0]reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
437[01-01 00:00:00.433] [3][1: swapper/0]rome_vreg: no parameters
438[01-01 00:00:00.433] [3][1: swapper/0]wlan_en_vreg: no parameters
439[01-01 00:00:00.436] [3][1: swapper/0]vgaarb: loaded
440[01-01 00:00:00.436] [3][1: swapper/0]chenjun:ak49xx_irq_probe: Enter
441[01-01 00:00:00.436] [3][1: swapper/0]ak49xx_intc soc:ak49xx-irq: ak49xx_irq_probe: virq = 412
442[01-01 00:00:00.436] [3][1: swapper/0]ak49xx_irq_probe data->es804_ldo_gpio : 16
443[01-01 00:00:00.436] [3][1: swapper/0]ak49xx_irq_get_pinctrl_configs(): Using Pinctrl
444[01-01 00:00:00.436] [3][1: swapper/0]pinctrl lookup failed for cdc_int_cfgak49xx_irq_probe(): 2: es804_ldo_gpio(16) value(1)
445[01-01 00:00:00.436] [3][1: swapper/0]SCSI subsystem initialized
446[01-01 00:00:00.440] [3][1: swapper/0]usbcore: registered new interface driver usbfs
447[01-01 00:00:00.440] [3][1: swapper/0]usbcore: registered new interface driver hub
448[01-01 00:00:00.440] [3][1: swapper/0]usbcore: registered new device driver usb
449[01-01 00:00:00.440] [3][1: swapper/0]soc:usb_nop_phy supply vcc not found, using dummy regulator
450[01-01 00:00:00.440] [3][1: swapper/0]media: Linux media interface: v0.10
451[01-01 00:00:00.440] [3][1: swapper/0]Linux video capture interface: v2.00
452[01-01 00:00:00.466] [3][1: swapper/0]cpufreq: driver msm up and running
453[01-01 00:00:00.466] [3][1: swapper/0]platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
454[01-01 00:00:00.466] [3][1: swapper/0]platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
455[01-01 00:00:00.466] [3][1: swapper/0]platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
456[01-01 00:00:00.466] [0][1: swapper/0]ION heap system created
457[01-01 00:00:00.466] [1][1: swapper/0]ION heap adsp created at 0x00000000ff800000 with size 400000
458[01-01 00:00:00.466] [1][1: swapper/]ION heap qsecom created at 0x00000000fe400000 with size 1400000
459[01-01 00:00:00.466] [1][1: swapper/0]ION heap secure_display created at 0x00000000f8800000 with size 5c00000
460[01-01 00:00:00.466] [1][1: swapper/0]ION heap secure_heap created
461[01-01 00:00:00.466] [1][1: swapper/0]msm_bus_fabric_init_driver
462[01-01 00:00:00.473] [1][1: swapper/0]msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
463[01-01 00:00:00.473] [1][1: swapper/0]msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
464[01-01 00:00:00.476] [1][1: swapper/0]msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
465[01-01 00:00:00.476] [1][1: swapper/0]msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
466[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
467[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
468[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
469[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
470[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
471[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
472[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
473[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
474[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
475[01-01 00:00:00.483] [2][1: swapper/0]msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
476[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
477[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
478[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-2: s3_src_reg: 2
479[01-01 00:00:00.486] [2][1: swapper/0]input: qpnp_pon as /devices/virtual/input/input0
480[01-01 00:00:00.486] [2][1: swapper/0]pon_spare_reg: no parameters
481[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
482[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
483[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
484[01-01 00:00:00.486] [2][1: swapper/0]qcom,qpnp-power-on qpnp-power-on-11: s3_src_reg: 2
485[01-01 00:00:00.486] [2][1: swapper/0]PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
486[01-01 00:00:00.486] [2][1: swapper/0]PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
487[01-01 00:00:00.486] [2][1: swapper/0]ipa ipa2_uc_state_check:296 uC interface not initialized
488[01-01 00:00:00.486] [2][1: swapper/0]ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
489[01-01 00:00:00.486] [2][1: swapper/0]ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
490[01-01 00:00:00.490] [3][1: swapper/0]sps:BAM 0x0000000000684000 is registered.
491[01-01 00:00:00.490] [2][1: swapper/0]ipa ipa2_uc_state_check:296 uC interface not initialized
492[01-01 00:00:00.490] [2][1: swapper/0]sps:BAM 0x0000000000684000 (va:0xffffff8001b40000) enabled: ver:0x27, number of pipes:20
493[01-01 00:00:00.493] [3][1: swapper/0]ipa ipa2_uc_state_check:296 uC interface not initialized
494[01-01 00:00:00.500] [3][1: swapper/0]ipa ipa2_uc_state_check:296 uC interface not initialized
495[01-01 00:00:00.500] [3][1: swapper/0]IPA driver initialization was successful.
496[01-01 00:00:00.503] [3][1: swapper/0]gdsc_mmagic_video: no parameters
497[01-01 00:00:00.503] [3][1: swapper/0]gdsc_mmagic_mdss: no parameters
498[01-01 00:00:00.503] [3][1: swapper/0]gdsc_mmagic_camss: no parameters
499[01-01 00:00:00.503] [3][1: swapper/0]gdsc_venus: no parameters
500[01-01 00:00:00.503] [3][1: swapper/0]gdsc_venus: supplied by gdsc_mmagic_video
501[01-01 00:00:00.503] [3][1: swapper/0]gdsc_venus_core0: fast normal 
502[01-01 00:00:00.503] [3][1: swapper/0]gdsc_venus_core1: fast normal 
503[01-01 00:00:00.503] [3][1: swapper/0]gdsc_camss_top: no parameters
504[01-01 00:00:00.503] [3][1: swapper/0]gdsc_camss_top: supplied by gdsc_mmagic_camss
505[01-01 00:00:00.503] [3][1: swapper/0]gdsc_vfe0: no parameters
506[01-01 00:00:00.503] [3][1: swapper/0]gdsc_vfe0: supplied by gdsc_camss_top
507[01-01 00:00:00.503] [3][1: swapper/0]gdsc_vfe1: no parameters
508[01-01 00:00:00.503] [3][1: swapper/0]gdsc_vfe1: supplied by gdsc_camss_top
509[01-01 00:00:00.503] [3][1: swapper/0]gdsc_mdss: no parameters
510[01-01 00:00:00.503] [3][1: swapper/0]gdsc_mdss: supplied by gdsc_mmagic_mdss
511[01-01 00:00:00.503] [3][1: swapper/0]gdsc_jpeg: no parameters
512[01-01 00:00:00.503] [3][1: swapper/0]gdsc_jpeg: supplied by gdsc_camss_top
513[01-01 00:00:00.503] [3][1: swapper/0]gdsc_cpp: no parameters
514[01-01 00:00:00.503] [3][1: swapper/0]gdsc_cpp: supplied by gdsc_camss_top
515[01-01 00:00:00.503] [3][1: swapper/0]gdsc_pcie_0: no parameters
516[01-01 00:00:00.503] [3][1: swapper/0]gdsc_pcie_1: no parameters
517[01-01 00:00:00.506] [3][1: swapper/0]gdsc_pcie_2: no parameters
518[01-01 00:00:00.506] [3][1: swapper/0]gdsc_usb30: no parameters
519[01-01 00:00:00.506] [3][1: swapper/0]gdsc_ufs: no parameters
520[01-01 00:00:00.506] [3][1: swapper/0]gdsc_fd: no parameters
521[01-01 00:00:00.506] [3][1: swapper/0]gdsc_fd: supplied by gdsc_camss_top
522[01-01 00:00:00.506] [3][1: swapper/0]gdsc_gpu: no parameters
523[01-01 00:00:00.506] [3][1: swapper/0]gdsc_gpu_gx: no parameters
524[01-01 00:00:00.506] [3][1: swapper/0]gdsc_gpu_gx: supplied by gfx_corner
525[01-01 00:00:00.506] [3][1: swapper/0]gdsc_hlos1_vote_aggre0_noc: no parameters
526[01-01 00:00:00.506] [3][1: swapper/0]gdsc_hlos1_vote_lpass_adsp: no parameters
527[01-01 00:00:00.506] [3][1: swapper/0]gdsc_hlos1_vote_lpass_core: no parameters
528[01-01 00:00:00.506] [3][1: swapper/0]gdsc_aggre0_noc: no parameters
529[01-01 00:00:00.510] [3][1: swapper/0]mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
530[01-01 00:00:00.510] [3][1: swapper/0]mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
531[01-01 00:00:00.513] [3][1: swapper/0]dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
532[01-01 00:00:00.513] [3][1: swapper/0]mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
533[01-01 00:00:00.513] [3][1: swapper/0]mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
534[01-01 00:00:00.513] [3][1: swapper/0]pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
535[01-01 00:00:00.513] [3][1: swapper/0]dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
536[01-01 00:00:00.513] [3][1: swapper/0]mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
537[01-01 00:00:00.513] [3][1: swapper/0]mdss_pll_probe: Unable to get the cell-index rc=-22
538[01-01 00:00:00.646] [3][1: swapper/0]Advanced Linux Sound Architecture Driver Initialized.
539[01-01 00:00:00.650] [3][1: swapper/0]Bluetooth: ffffffc0f989bd20
540[01-01 00:00:00.650] [3][1: swapper/0]NET: Registered protocol family 31
541[01-01 00:00:00.650] [3][1: swapper/0]Bluetooth: ffffffc0f989bd20
542[01-01 00:00:00.650] [3][1: swapper/0]Bluetooth: ffffffc0f989bd00Bluetooth: ffffffc0f989bcd0
543[01-01 00:00:00.650] [3][1: swapper/0]Bluetooth: ffffffc0f989bce0[01-01 00:00:00.650] [3][21: reg_todo+0x0/0x]cfg80211: Calling CRDA tk update world regulatory domain
544[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211: World regulatory domain updated:
545[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:  DFS Master region: unset
546[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
547[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
548[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
549[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
550[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
551[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
552[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
553[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
554[01-01 00:00:00.650] [3][21: reg_regdb_searc]cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
555[01-01 00:00:00.650] [2][1: swapper/0]pcie:pcie_init.
556[01-01 00:00:00.653] [2][1: swapper/0]600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
557[01-01 00:00:00.656] [2][1: swapper/0]msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
558[01-01 00:00:00.656] [2][1: swapper/0]608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
559[01-01 00:00:00.660] [2][1: swapper/0]msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
560[01-01 00:00:00.660] [2][1: swapper/0]610000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
561[01-01 00:00:00.663] [2][1: swapper/0]msm_pcie_get_resources: PCIe: RC2 can't get tcsr resource.
562[01-01 00:00:00.666] [1][6: deferred_probe_]pmi8994_boost_5v: no parameters
563[01-01 00:00:00.666] [1][6: deferred_probe_]pmi8994_boost_5v: supplied by pon_spare_reg
564[01-01 00:00:00.670] [1][6: deferred_probe_]pmi8994_boost_pin_ctrl: no parameters
565[01-01 00:00:00.670] [1][6: deferred_probe_]pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
566[01-01 00:00:00.670] [1][6: deferred_probe_]ibb_reg: 4600 <--> 6000 mV at 5500 mV 
567[01-01 00:00:00.670] [1][6: deferred_probe_]lab_reg: 4600 <--> 6000 mV at 5500 mV 
568[01-01 00:00:00.670] [1][6: deferred_probe_]usb_otg_vreg: no parameters
569[01-01 00:00:00.670] [1][6: deferred_probe_]reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
570[01-01 00:00:00.673] [1][6: deferred_probe_]reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
571[01-01 00:00:00.673] [2][1: swapper/0]Switched to clocksource arch_sys_counter
572[01-01 00:00:00.716] [2][1: swapper/0]zte_misc_probe +++++
573[01-01 00:00:00.716] [2][1: swapper/0]zte_misc: translate hardware pin to system pin
574[01-01 00:00:00.720] [2][1: swapper/0]unable to find DT imem msm-imem-pm_parameter node
575[01-01 00:00:00.720] [2][1: swapper/0]is_haptics=0
576[01-01 00:00:00.720] [2][1: swapper/0]zte_misc_fingerprint_hw_check, fingerprint_id is :1 name:NONE
577[01-01 00:00:00.720] [2][1: swapper/0]zte_misc_probe ----
578[01-01 00:00:00.720] [2][1: swapper/0]bcl_peripheral:bcl_perph_init BCL Initialized
579[01-01 00:00:00.726] [3][1: swapper/0]NET: Registered protocol family 2
580[01-01 00:00:00.726] [3][1: swapper/0]TCP established hash table entries: 32768 (order: 6, 262144 bytes)
581[01-01 00:00:00.726] [3][1: swapper/0]TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
582[01-01 00:00:00.726] [3][1: swapper/0]TCP: Hash tables configured (established 32768 bind 32768)
583[01-01 00:00:00.726] [3][1: swapper/0]TCP: reno registered
584[01-01 00:00:00.726] [3][1: swapper/0]UDP hash table entries: 2048 (order: 4, 65536 bytes)
585[01-01 00:00:00.726] [3][1: swapper/0]UDP-Lite hash table entrids: 2048 (order: 4, 65536 bytes)
586[01-01 00:00:00.726] [3][1: swapper/0]NET: Registered protocol family 1
587[01-01 00:00:00.730] [1][6: deferred_probe_]usb_otg_vreg: no parameters
588[01-01 00:00:00.730] [1][6: deferred_probe_]reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
589[01-01 00:00:00.730] [1][6: deferred_probe_]reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
590[01-01 00:00:00.730] [3][1: swapper/0]Trying to unpack rootfs image as initramfs...
591[01-01 00:00:00.816] [3][1: swapper/0]Freeing initrd memory: 3972K (ffffffc002200000 - ffffffc0025e1000)
592[01-01 00:00:00.820] [3][1: swapper/0]kryo perfevents: CPU pmu for kryo-pmuv3 detected
593[01-01 00:00:00.823] [3][1: swapper/0]futex hash table entries: 1024 (order: 5, 131072 bytes)
594[01-01 00:00:00.823] [3][1: swapper/0]audit: initializing netlink subsys (disabled)
595[01-01 00:00:00.823] [3][1: swapper/0]audit: type=2000 audit(0.823:1): initialized
596[01-01 00:00:00.826] [0][1: swapper/0]vmscan: error setting kswapd cpu affinity mask
597[01-01 00:00:00.830] [3][1: swapper/0]VFS: Disk quotas dquot_6.5.2
598[01-01 00:00:00.830] [3][1: swapper/0]Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
599[01-01 00:00:00.830] [3][1: swapper/0]fuse init (API version 7.23)
600[01-01 00:00:00.830] [3][1: swapper/0]msgmni has been set to 7402
601[01-01 00:00:00.833] [3][1: swapper/0]pfk [pfk_init]: Driver initialized successfully
602[01-01 00:00:00.833] [3][1: swapper/0]Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
603[01-01 00:00:00.833] [3][1: swapper/0]io scheduler noop registered (default)
604[01-01 00:00:00.833] [3][1: swapper/0]io scheduler deadline registered
605[01-01 00:00:00.833] [3][1: swapper/0]io scheduler cfq registered
606[01-01 00:00:00.833] [3][1: swapper/0]io scheduler test-iosched registered
607[01-01 00:00:00.833] [3][1: swapper/0]io scheduler bfq registered
608[01-01 00:00:00.833] [3][1: swapper/0]BFQ I/O-scheduler: v7r8
609[01-01 00:00:00.846] [3][1: swapper/0]mdss_mdp_irq_clk_register: unable to get clk: lut_clk
610[01-01 00:00:00.846] [3][1: swapper/0]No change in context(0==0), skip
611[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
612[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
613[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
614[01-01 00:00:00.850] [3][1: swapper/0Ymdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
615[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
616[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
617[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
618[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
619[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
620[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
621[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
622[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
623[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
624[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
625[01-01 00:00:00.850] [3][1: swapper/0]xlog_status: enable:1, panic:1, dump:2
626[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
627[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
628[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
629[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
630[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
631[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
632[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
633[01-01 00:00:00.850] [3][1: swapper/0]OF: no ranges; cannot translate
634[01-01 00:00:00.850] [3][1: swapper/0]mdss_mdp_probe: mdss version = 0x10070002, bootlkader display is on, num 1, intf_sel=0x00010100
635[01-01 00:00:00.856] [2][1: swapper/0]mdrs_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
636[01-01 00:00:00.856] [2][1: swapper/0]mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
637[01-01 00:00:00.856] [2][1: swapper/0]mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
638[01-01 00:00:00.856] [2][1: swapper/0]mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
639[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
640[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd:1:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd
641[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_panel_init: Panel Name = zteSAM_S6E3HA3_SAM_25601440_5P5Inch
642[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd" (ffffffc0f989b350)
643[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
644[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
645[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
646[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_panel_features: partial_update_enabled=0
647[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_panel_features: ulps feature enabled
648[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_panel_features: ulps during suspend feature disabled
649[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
650[01-01 00:00:00.860] [2][1: swapper/0]LCD mdss_dsi_parse_esd_params:, zte,esd-inter2upt-gpio found:53!
651[01-01 00:00:00.860] [2][1: swapper/0]LCD mdss_dsi_panel_lcd_proc: Panel Name = zteSAM_S6E3HA3_SAM_25601440_5P5Inch
652[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_ctrl_params:3923 Unable to read qcom,display-id, data=0000000000000000,len=20
653[01-01 00:00:00.860] [2][1: swapper/0]LCD dsi_panel_device_register:, qcom,lcd-3v-vsp-enable-gpio found!
654[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_parse_gpio_params: bklt_en gpio not specified
655[01-01 00:00:00.860] [2][1: swapper/0]msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
656[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
657[01-01 00:00:00.860] [2][1: swapper/0]mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001b72000 ctrl_size=400 phy_base=ffffff8001b74400 phy_size=588
658[01-01 00:00:00.860] [3][1: swapper/0]dsi_panel_device_register: Continuous splash enabled
659[01-01 00:00:00.860] [3][1: swapper/0]mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
660[01-01 00:00:00.863] [3][1: swapper/0]LCD 3v_power GPIO(vsp):40 , Enable:1
661[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
662[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
663[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd:1:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd
664[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_panel_init: Panel Name = zteSAM_S6E3HA3_SAM_25601440_5P5Inch
665[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_zte_samsung_5p5_wqhd_dualmipi_cmd" (ffffffc0f989b350)
666[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
667[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
668[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_panel_features: partial_update_enabled=0
669[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_panel_features: ulps feature enabled
670[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_panel_features: ulps during suspend feature disabled
671[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
672[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_ctrl_params:3923 Unable to read qcom,display-id, data=0000000000000000,len=20
673[01-01 00:00:00.873] [3][1: swapper/0]dsi_panel_device_register:4070, qcom,lcd-3v-vsp-enable-gpio not specified
674[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_parse_gpio_params: bklt_en gpio not specified
675[01-01 00:00:00.873] [3][1: swapper/0]msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
676[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
677[01-01 00:00:00.873] [3][1: swapper/0]mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001b78000 ctrl_size=400 phy_base=ffffff8001b7a400 phy_size=558
678[01-01 00:00:00.873] [3][1: swapper/0]dsi_panel_device_register: Continuous splash enabled
679[01-01 00:00:00.873] [3][1: swapper/0]panel_debug_register_base: debugfs_create_file: data_type fail
680[01-01 00:00:00.873] [3][1: swapper/0]LCD 3v_power GPIO(vsp):-2 , Enable:1
681[01-01 00:00:00.883] [3][1: swapper/0]mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
682[01-01 00:00:00.883] [3][1: swapper/0]mdss_dsi_status_init: DSI status check interval:5000
683[01-01 00:00:00.883] [3][1: swapper/0]mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
684[01-01 00:00:00.886] [3][1: swapper/0]mdss_fb_probe: fb0: split_mode:2 left:720 right:720
685[01-01 00:00:00.886] [3][1: swapper/0]mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
686[01-01 00:00:00.886] [3][1: swapper/0]mdss_fb_probe: fb1: split_mode:0 left:0 right:0
687[01-01 00:00:00.886] [3][1: swapper/0]mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
688[01-01 00:00:00.890] [3][1: swapper/0]mdss_mdp_splash_parse_dt: splash mem child node is not present
689[01-01 00:00:00.903] [3][84: memshare_init_w][PM-IPC] register ipc00000001_memshare_init_w
690[01-01 00:00:00.903] [3][84: memshare_init_w][PM-IPC] register ipc00000002_memshare_init_w
691[01-01 00:00:00.903] [3][1: swapper/0]In memshare_probe, Memshare probe success
692[01-01 00:00:00.910] [3][1: swapper/0]l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
693[01-01 00:00:00.910] [3][1: swapper/0]msm_rpm_log_probe: OK
694[01-01 00:00:00.913] [3][1: swapper/0]subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
695[01-01 00:00:00.916] [3][1: swapper/0]subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
696[01-01 00:00:00.920] [0][35: smd_channel_pro]smd_channel_probe_now: allocation table not initialized
697[01-01 00:00:00.920] [3][1: swapper/0]pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
698[01-01 00:00:00.923] [3][1: swapper/0][PM-IPC] register ipc00000003_swapper/0
699[01-01 00:00:00.923] [3][1: swapper/0]input: qbt1000_key_input as /devices/virtual/input/input1
700[01-01 00:00:00.923] [3][1: swapper/0]uart_tx_gpio is not available
701[01-01 00:00:00.923] [3][1: swapper/0]uart_rx_gpio is not available
702[01-01 00:00:00.923] [3][1: swapper/0]uart_cts_gpio is not available
703[01-01 00:00:00.923] [3][1: swapper/0]uart_rfr_gpio is not available
704[01-01 00:00:00.923] [3][1: swapper/0]sps: BAM device 0x0000000007544000 is not registered yet.
705[01-01 00:00:00.926] [3][1: swapper/0]sps:BAM 0x0000000007544000 is registered.
706[01-01 00:00:00.926] [3][1: swapper/0]7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 21, base_baud = 460800) is a MSM HS UART
707[01-01 00:00:00.930] [3][1: swapper/0]msm_serial_hs module loaded
708[01-01 00:00:00.953] [3][1: swapper/0]brd: module loaded
709[01-01 00:00:00.953] [3][1: swapper/0]loop: module loaded
710[01-01 00:00:00.953] [3][1: swapper/0]zram: Created 1 device(s) ...
711[01-01 00:00:00.956] Z3][1: swapper/0]QSEECOM: qseecom_probe: qseecom.qsee_version = 0x100000 
712[01-01 00:00:00.956] [3][1: swapper/0]QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
713[01-01 00:00:00.956] [3][1: swapper/0]QSEECOM: qseecom_probe: no-clock-support=0x1[01-01 00:00:00.956] [3][1: swapper/0]QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
714[01-01 00:00:00.956] [3][1: swapper/0]QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
715[01-01 00:00:00.960] [3][1: swapper/0]ak49xx_init: succeed in registering ak4960_slim_driver
716[01-01 00:00:00.960] [3][1: swapper/0]ak49xx_init: succeed in registering ak4960_spi_driver
717[01-01 00:00:00.960] [3][1: swapper/0]ak49xx_init: succeed in registering ak4961_slim_driver
718[01-01 00:00:00.960] [3][1: swapper/0]ak49xx_init: succeed in registering ak4961_spi_driver
719[01-01 00:00:00.960] [3][1: swapper/0]i2c-core: driver [tabla-i2c-core] using legacy suspend method
720[01-01 00:00:00.960] [3][1: swapper/0]i2c-core: driver [tabla-i2c-core] using legacy resume method
721[01-01 00:00:00.960] [3][1: swapper/0]i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
722[01-01 00:00:00.960] [3][1: swapper/0]i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
723[01-01 00:00:00.960] [3][1: swapper/0]i2c-core: driver [tasha-i2c-core] using legacy suspend method
724[01-01 00:00:00.960] [3][1: swapper/0]i2c-core: driver [tasha-i2c-core] using legacy resume method
725[01-01 00:00:00.960] [3][1: swapper/0]Loading pn5xx driver
726[01-01 00:00:00.963] [3][1: swapper/0] pn5xx_probe: start
727[01-01 00:00:00.963] [3][1: swapper/0] pn5xx_probe: pn5xx reset
728[01-01 00:00:00.963] [3][1: swapper/0] pn5xx_probe: request_irq ok
729[01-01 00:00:00.963] [3][1: swapper/0] create_nfc_info_proc_file: goes to create_nfc_info_proc_file
730[01-01 00:00:00.963] [3][1: swapper/0] pn5xx_probe: nfc probe is ok
731[01-01 00:00:00.963] [3][1: swapper/0]qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
732[01-01 00:00:00.963] [3][1: swapper/0]qce 660000.qcedev: CE device = 0x0
733[01-01 00:00:00.963] [3][1: swapper/0], IO base, CE = 0xffffff80038c0000
734[01-01 00:00:00.963] [3][1: swapper/0], Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
735[01-01 00:00:00.963] [3][1: swapper/0]IO base BAM = 0x          (null)
736[01-01 00:00:00.963] [3][1: swapper/0]BAM IRQ 250
737[01-01 00:00:00.963] [3][1: swapper/0]Engines Availability = 0x2011053
738[01-01 00:00:00.963] [3][1: swapper/0]sps:BAM 0x0000000000644000 is registered.
739[01-01 00:00:00.963] [3][1: swapper/0]sps:BAM 0x0000000000644000 (va:0xffffff80047c0000) enabled: ver:0x27, number of pipes:16
740[01-01 00:00:00.963] [3][1: swapper/0]QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 250
741[01-01 00:00:00.973] [3][1: swapper/0]qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
742[01-01 00:00:00.973] [3][1: swapper/0]qcrypto 660000.qcrypto: CE device = 0x0
743[01-01 00:00:00.973] [3][1: swapper/0], IO base, CE = 0xffffff8004940000
744[01-01 00:00:00.973] [3][1: swapper/0], Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
745[01-01 00:00:00.973] [3][1: swapper/0]IO base BAM = 0x          (null)
746[01-01 00:00:00.973] [3][1: swapper/0]BAM IRQ 250
747[01-01 00:00:00.973] [3][1: swapper/0]Engines Availability = 0x2011053
748[01-01 00:00:00.973] [3][1: swapper/0]QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 250
749[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-ecb-aes
750[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-cbc-aes
751[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-ctr-aes
752[01-01 00:00:00.980] [2][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-ecb-des
753[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-cbc-des
754[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-ecb-3des
755[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-cbc-3des
756[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-xts-aes
757[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-sha1
758[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-sha256
759[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcr9pto-aead-hmac-sha1-cbc-aes
760[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
761[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
762[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
763[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
764[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
765[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-hmac-sha1
766[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-hmac-sha256
767[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-aes-ccm
768[01-01 00:00:00.980] [3][1: swapper/0]qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
769[01-01 00:00:00.983] [3][1: swapper/0]ICE IRQ = 33
770[01-01 00:00:00.983] [3][1: swapper/0]qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
771[01-01 00:00:00.983] [3][1: swapper/0]ICE IRQ = 34
772[01-01 00:00:00.990] [2][1: swapper/0]qcom_ice_get_pdevice: found ice device ffffffc0f6803000
773[01-01 00:00:00.990] [2][1: swapper/0]qcom_ice_get_pdevice: matching platform device ffffffc0f8fffc00
774[01-01 00:00:00.990] [3][1: swapper/0]scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
775[01-01 00:00:00.990] [3][1: swapper/0]ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
776[01-01 00:00:00.990] [3][1: swapper/0]ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
777[01-01 00:00:00.990] [3][1: swapper/0]scsi host0: ufshcd
778[01-01 00:00:00.993] [3][1: swapper/0]qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002450000
779[01-01 00:00:01.003] [3][1: swapper/0]SCSI Media Changer driver v0.25 
780[01-01 00:00:01.006] [3][1: swapper/0]sps: BAM device 0x0000000007584000 is not registered yet.
781[01-01 00:00:01.006] [3][1: swapper/0]sps:BAM 0x0000000007584000 is registered.
782[01-01 00:00:01.006] [3][1: swapper/0]sps:BAM 0x00000000075(4000 (va:0xffffff80067c0000) enabled: ver:0x19, number of pipes:24
783[01-01 00:00:01.006] [3][1: swapper/0]ak49xx_spi_probe
784[01-01 00:00:01.010] [3][1: swapper/0]Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
785[01-01 00:00:01.010] [3][1: swapper/0]tun: Universal TUN/TAP device driver, 1.6
786[01-01 00:00:01.010] [3][1: swapper/0]tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
787[01-01 00:00:01.013] [3][1: swapper/0]PPP generic driver version 2.4.2
788[01-01 00:00:01.013] [3][1: swapper/0]PPP BSD Compression module registered
789[01-01 00:00:01.013] [3][1: swapper/0]PPP Deflate Compression module registered
790[01-01 00:00:01.013] [3][1: swapper/0]PPP MPPE Compression module registered
791[01-01 00:00:01.013] [3][1: swapper/0]NET: Registered protocol family 24
792[01-01 00:00:01.020] [0][6: async_run_entry]ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
793[01-01 00:00:01.100] [0][1: swapper/0]PCI host bridge /soc/qcom,pcie@00600000 ranges:
794[01-01 00:00:01.100] [0][1: swapper/0]  No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
795[01-01 00:00:01.100] [0][1: swapper/0]   IO 0x0c200000..0x0c2fffff -> 0x0c200000
796[01-01 00:00:01.100] [0][1: swapper/0]  MEM 0x0c300000..0x0cffffff -> 0x0c300000
797[01-01 00:00:01.110] [0][1: swapper/0]pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
798[01-01 00:00:01.110] [0][1: swapper/0]pci_bus 0000:00: root bus resource [bus 00-ff]
799[01-01 00:00:01.110] [0][1: swapper/0]pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
800[01-01 00:00:01.110] [0][1: swapper/0]pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
801[01-01 00:00:01.110] [0][1: swapper/0]msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
802[01-01 00:00:01.110] [0][1: swapper/0]pci 0000:00:00.0: IOMMU is currently not supported for PCI
803[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
804[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
805[01-01 00:00:01.113] [0][1: swapper/0]msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
806[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:01:00.0: IOMMU is currently not supported for PCI
807[01-01 00:00:01.113] [0][1: swapper/0]msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
808[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
809[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
810[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
811[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:00:00.0: PCI bridge to [bus 01]
812[01-01 00:00:01.113] [0][1: swapper/0]pci 0000:00:00.0:   bridge window [mem 0x0c400000-0x0c5fffff]
813[01-01 00:00:01.116] [0][1: swapper/0]cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
814[01-01 00:00:01.133] [0][1: swapper/0]cnss: Platform driver probed successfully.
815[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver asix
816[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver ax88179_178a
817[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver cdc_ether
818[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver net1080
819[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver cdc_subset
820[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver zaurus
821[01-01 00:00:01.136] [0][1: swapper/0]usbcore: registered new interface driver cdc_ncm
822[01-01 00:00:01.136] [0][35: sharedmem_qmi_i][PM-IPC] register ipc00000004_sharedmem_qmi_i
823[01-01 00:00:01.136] [0][35: sharedmem_qmi_i][PM-IPC] register ipc00000005_sharedmem_qmi_i
824[01-01 00:00:01.136][0][35: sharedmem_qmi_i]msm_sharedmem: sharedmem_register_qmi: qmi init successful
825[01-01 00:00:01.140] [2][1: swapper/0]msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
826[01-01 00:00:01.143] [2][1: swapper/0]7411000.qusb supply USB3_GDSC not found, using dummy regulator
827[01-01 00:00:01.143] [2][1: swapper/0]7412000.qusb supply USB3_GDSC not found, using dummy regulator
828[01-01 00:00:01.146] [3][1: swapper/0]msm-dwc3 6a00000.ssusb: unable to get dbm device
829[01-01 00:00:01.150] [3][1: swapper/0]ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
830[01-01 00:00:01.150] [3][1: swapper/0]ehci-pci: EHCI PCI platform driver
831[01-01 00:00:01.150] [3][1: swapper/0]usbcore: registered new interface driver usb-storage
832[01-01 00:00:01.150] [3][1: swapper/0]usbcore: registered new interface driver ums-alauda
833[01-01 00:00:01.150] [3][1: swapper/0]usbcore: registered new interface driver ums-cypress
834[01-01 00:00:01.150] [3][1: swapper/0]usbcore: registered new interface driver ums-datafab
835[01-01 00:00:01.150] [3][1: swapper/0]usbcore: registered new interface driver ums-freecom
836[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver ums-isd200
837[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver ums-jumpshot
838[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver ums-karma
839[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver ums-sddr09
840[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver ums-sddr55
841[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver ums-usbat
842[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver usbserial
843[01-01 00:00:01.153] [3][1: swapper/0]usbcore: registered new interface driver usb_ehset_test
844[01-01 00:00:01.153] [3][1: swapper/0]gbridge_init: gbridge_init successs.
845[01-01 00:00:01.153] [3][1: swapper/0]hd3ss3220_pinctrl_init: pinctrl not defined
846[01-01 00:00:01.153] [3][1: swapper/0]i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x14 (ok)
847[01-01 00:00:01.153] [3][1: swapper/0]hd3ss3220 7-0007: hd3ss3220 usb type-c ship finish probe
848[01-01 00:00:01.153] [3][1: swapper/0]pi5usb302_pinctrl_init: pinctrl not defined
849[01-01 00:00:01.156] [0][0: swapper/0]i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0xd MSTR_STS:0x0d1300c8 OPER:0x00000010
850[01-01 00:00:01.156] [3][1: swapper/0]pi5usb302_read_byte: (0x1) error, ret(-107)
851[01-01 00:00:01.156] [3][1: swapper/0]pi5usb302_initialization: read REG_ID fail!
852[01-01 00:00:01.156] [3][1: swapper/0]pi5usb302_probe: fails to do initialization -107
853[01-01 00:00:01.156] [3][1: swapper/0]pi5usb302: probe of 7-000d failed with error -107
854[01-01 00:00:01.156] [3][1: swapper/0]mousedev: PS/2 mouse device common for all mice
855[01-01 00:00:01.156] [3][1: swapper/0]usbcore: registered new interface driver iforce
856[01-01 00:00:01.156] [3][1: swapper/0]usbcore: registered new interface driver xpad
857[01-01 00:00:01.160] [3][1: swapper/0]pzh:Enter synaptics_rmi4_i2c_probe
858[01-01 00:00:01.160] [3][1: swapper/0]pzh:leave synaptics_rmi4_i2c_probe
859[01-01 00:00:01.160] [3][1: swapper/0]pzh:Enter synaptics_rmi4_probe
860[01-01 00:00:01.160] [3][1: swapper/0]synaptics_rmi4_enable_reg : enable power regulator of bus_reg successfully!
861[01-01 00:00:01.160] [3][1: swapper/0]synaptics_rmi4_enable_reg : enable power regulator of pwr_reg successfully!
862[01-01 00:00:01.230] [0][6: async_run_entry]ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
863[01-01 00:00:01.230] [0][6: async_run_entry]scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
864[01-01 00:00:01.230] [1][6: async_run_entry]scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
865[01-01 00:00:01.233] [1][6: async_run_entry]scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
866[01-01 00:00:01.233] [2][247: async_run_entry]scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
867[01-01 00:00:01.233] [2][247: async_run_entry]scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
868[01-01 00:00:01.236] [2][247: async_run_entry]scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
869[01-01 00:00:01.236] [2][247: async_run_entry]scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
870[01-01 00:00:01.236] [2][247: async_run_entry]scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
871[01-01 00:00:01.236] [2][247: async_run_entry]scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUCG4J1CB-B0B1  0700 PQ: 0 ANSI: 6
872[01-01 00:00:01.236] [1][6: async_run_entry]sd 0:0:0:0: [sda] 16384-byte physical blocks
873[01-01 00:00:01.236] [0][51: async_run_entry]sd 0:0:0:1: [sdb] 16384-byte physical blocks
874[01-01 00:00:01.240] [2][260: async_run_entry]sd 0:0:0:2: [sdc] 16384-byte physical blocks
875[01-01 00:00:01.240] [0][248: async_run_entry]sd 0:0:0:3: [sdd] 16384-byte physical blocks
876[01-01 00:00:01.240] [3][261: async_run_entry]sd 0:0:0:4: [sde] 16384-byte physical blocks
877[01-01 00:00:01.240] [2][247: async_run_entry]sd 0:0:0:5: [sdf] 16384-byte physical blocks
878[01-01 00:00:01.243] [1][6: async_run_entry]sd 0:0:0:0: [sda] 16384-byte physical blocks
879[01-01 00:00:01.243] [3][260: async_run_entry]sd 0:0:0:2: [sdc] 16384-byte physical blocks
880[01-01 00:00:01.243] [0][51: async_run_entry]sd 0:0:0:1: [sdb] 16384-byte physical blocks
881[01-01 00:00:01.243] [3][261: async_run_entry]sd 0:0:0:4: [sde] 16384-byte physical blocks
882[01-01 00:00:01.246] [3][248: async_run_entry]sd 0:0:0:3: [sdd] 16384-byte physical blocks
883[01-01 00:00:01.246] [3][247: async_run_entry]sd 0:0:0:5: [sdf] 16384-byte physical blocks
884[01-01 00:00:01.246] [0][260: async_run_entry] sdc: sdc1
885[01-01 00:00:01.246] [1][6: async_run_entry] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
886[01-01 00:00:01.246] [2][260: async_run_entry]sd 0:0:0:2: [sdc] 16384-byte physical blocks
887[01-01 00:00:01.246] [3][51: async_run_entry] sdb: sdb1
888[01-01 00:00:01.250] [3][247: async_run_entry] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
889[01-01 00:00:01.250] [1][261: async_run_entry] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26
890[01-01 00:00:01.250] [3][51: async_run_entry]sd 0:0:0:1: [sdb] 16384-byte physical blocks
891[01-01 00:00:01.250] [1][2: async_run_entry]sd 0:0:0:0: [sda] 16384-byte physical blocks
892[01-01 00:00:01.250] [1][248: async_run_entry] sdd: sdd1 sdd2 sdd3
893[01-01 00:00:01.250] [0][247: async_run_entry]sd 0:0:0:5: [sdf] 16384-byte physical blocks
894[01-01 00:00:01.253] [0][248: async_run_entry]sd 0:0:0:3: [sdd] 16384-byte physical blocks
895[01-01 00:00:01.253] [3][261: async_run_entry]sd 0:0:0:4: [sde] 16384-byte physical blocks
896[01-01 00:00:01.390] [0][1: swapper/0]i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
897[01-01 00:00:01.400] [0][1: swapper/0]synaptics_rmi4_f12_init---query_5->ctrl8_is_present----max x = 1439 max y = 2559
898[01-01 00:00:01.406] [0][1: swapper/0]synaptics_rmi4_set_params---max x = 1439 max y = 2559
899[01-01 00:00:01.406] [0][1: swapper/0]input: synaptics_dsx as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input2
900[01-01 00:00:01.406] [0][1: swapper/0]syna_fwupdate_init:synaptics firmware update init succeed!
901[01-01 00:00:01.406] [0][1: swapper/0]proc_create forcetouch_vendor success!
902[01-01 00:00:01.406] [0][1: swapper/0]pzh:leave synaptics_rmi4_probe
903[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[ndt_stress_probe:2441] ndt_stress_probe:start!
904[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[ndt_stress_probe:2442] NDT Driver Version: P8952A10V0.1
905[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[ndt_stress_probe:2444] NDT I2C Address: 0x50
906[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:276] irq_gpio: 122
907[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:285] irq_on_state: 0
908[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:293] irq_flags: 8200
909[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:303] pwr_reg_name: (null)
910[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:313] bus_reg_name: (null)
911[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:328] power_gpio: 69, power_on_state 1
912[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:341] power_delay_ms: 20
913[01-01 00:00:01.410] [0][1: swapper/0]<<NDT-INF>>[parse_dt:374] reset_gpio: 121, reset_on_state: 0, reset_active_ms 10, reset_delay_ms 10
914[01-01 00:00:01.430] [0][0: swapper/0]i2c-msm-v2 75ba000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:6) mode:FIFO slv_addr:0x50 MSTR_STS:0x0d1300c8 OPER:0x00000090
915[01-01 00:00:01.430] [2][1: swapper/0]<<NDT-ERR>>[ndt_stress_write_eeprom:524] i2c_master_send Error ! err_code:-107, reg: 0x0000
916[01-01 00:00:01.430] [2][1: swapper/0]<<NDT-ERR>>[ndt_stress_probe:2475] Failed to jump wait
917[01-01 00:00:01.566] [0][0: swapper/0]i2c-msm-v2 75ba000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 MSTR_STS:0x0d1300c8 OPER:0x00000010
918[01-01 00:00:01.566] [3][1: swapper/0]<<NDT-ERR>>[ndt_stress_i2c_read:478] ndt_stress_i2c_read addr 0x0005
919[01-01 00:00:01.613] [0][0: swapper/0]i2c-msm-v2 75ba000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 MSTR_STS:0x0d1300c8 OPER:0x00000010
920[01-01 00:00:01.613] [3][1: swapper/0]<<NDT-ERR>>[ndt_stress_i2c_read:478] ndt_stress_i2c_read addr 0x0005
921[01-01 00:00:01.686] [0][0: swapper/0]i2c-msm-v2 75ba000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x50 MSTR_STS:0x0d1300c8 OPER:0x00000010
922[01-01 00:00:01.686] [3][1: swapper/0]<<NDT-ERR>>[ndt_stress_i2c_read:478] ndt_stress_i2c_read addr 0x0005
923[01-01 00:00:01.686] [3][1: swapper/0]<<NDT-ERR>>[ndt_i2c_test:2222] NDT device test failed!!!!
924[01-01 00:00:01.686] [3][1: swapper/0]
925[01-01 00:00:01.686] [3][1: swapper/0]<<NDT-ERR>>[ndt_stress_probe:2495] Failed to test ndt i2c
926[01-01 00:00:01.710] [3][1: swapper/0]<<NDT-INF>>[ndt_stress_power_switch:640] ------------power down
927[01-01 00:00:01.710] [3][1: swapper/0]<<NDT-INF>>[ndt_force_firmware_update:1493] !!!-_-!!!force update firmware !!!-_-!!!
928[01-01 00800:01.710] [3][1: swapper/0]<<NDT-INF>>[debug_proc_init:1769] created ndt_debug
929[01-01 00:00:01.710] [3][1: swapper/0]<<NDT-INF>>[test_proc_init:1892] created press_test
930[01-01 00:00:01.710] [3][1: swapper/0]<<NDT-INF>>[compatible_proc_init:1555] created compatible_test
931[01-01 00:00:01.710] [3][1: swapper/0]ndt_stress_probe:forcetouch_vendor=0
932[01-01 00:00:01.710] [3][1: swapper/0]<<NDT-INF>>[ndt_stress_probe:2566] ndt_stress_probe:end!
933[01-01 00:00:01.710] [3][1: swapper/0][GoodixFp]gf_init: <HW> Goodix gf3118M fingerprint hw detected
934[01-01 00:00:01.710] [3][1: swapper/0][GoodixFp]gf_init: gf:gf_init, entry
935[01-01 00:00:01.710] [3][1: swapper/0][GoodixFp]gf_probe: gf:gf_probe, entry
936[01-01 00:00:01.710] [3][1: swapper/0][GoodixFp]gf_probe: probe begin
937[01-01 00:00:01.713] [3][1: swapper/0][GoodixFp]gf_parse_dts: gf:irq_gpio:123
938[01-01 00:00:01.726] [3][1: swapper/0][GoodixFp]gf_parse_dts: Power on when parse dt.
939[01-01 00:00:01.726] [3][1: swapper/0][GoodixFp]gf_probe: major:0x225 minor:0x0
940[01-01 00:00:01.726] [3][1: swapper/0]input: qwerty as /devices/virtual/input/input3
941[01-01 00:00:01.726] [3][1: swapper/0][GoodixFp]gf_disable_irq: IRQ has been disabled.
942[01-01 00:00:01.726] [3][1: swapper/0][GoodixFp]gf_probe: probe end successful
943[01-01 00:00:01.726] [3][1: swapper/0][GoodixFp]gf_init:  status = 0x0
944[01-01 00:00:01.726] [3][1: swapper/0][GoodixFp]gf_init: gf:gf_init, exit
945[01-01 00:00:01.726] [3][1: swapper/0]qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
946[01-01 00:00:01.726] [3][1: swapper/0]ZTE_ALARM_RTC enable_irq_wake: 187
947[01-01 00:00:01.726] [3][1: swapper/0]i2c /dev entries driver
948[01-01 00:00:01.760] [3][1: swapper/0]vmem: Up and running with 4 banks of memory from [irq size 270706692809 64bit disabled]
949Y01-01 00:00:01.780] [3][1: swapper/0]msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
950[01-01 00:00:01.780] [3][1: swapper/0]msm_actuator_platform_probe:1941 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
951[01-01 00:00:01.780] [3][1: swapper/0]qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
952[01-01 00:00:01.780] [3][1: swapper/0]msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
953[01-01 00:00:01.780] [3][1: swapper/0]msm_actuator_platform_probe:1941 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
954[01-01 00:00:01.780] [3][1: swapper/0]qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@1 failed with error -22
955[01-01 00:00:01.806] [3][1: swapper/0]msm_cci_init:1385: hw_version = 0x10040000
956[01-01 00:00:01.806] [3][1: swapper/0]ov8856_read_eeprom_memory begin
957[01-01 00:00:01.810] [3][1: swapper/0]ov8856_read_eeprom_init:0x5000 temp=0x77ov8856_read_eeprom_init:0x5001 temp=0xA
958[01-01 00:00:01.810] [3][1: swapper/0]sensor_module_id =0x6
959[01-01 00:00:01.810] [3][1: swapper/0]ZTE_CAMERA:parse_module_name:728:sensor_module_name = qtech_ov8856
960[01-01 00:00:01.830] [3][1: swapper/0]ov8856_validflag_check_eeprom :1565: valid info flag = 0x0  true
961[01-01 00:00:01.830] [3][1: swapper/0]ov8856_read_eeprom_end:0x5001 temp=0x2
962[01-01 00:00:01.830] [3][1: swapper/0]ov8856_read_eeprom_memory end[01-01 00:00:01.880] [2][1: swapper/0]msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
963[01-01 00:00:01.880] [2][1: swapper/0]msm_camera_power_up:1432 Initialization of pinctrl failed
964[01-01 00:00:01.880] [2][1: swapper/0]msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
965[01-01 00:00:01.883] [2][1: swapper/0]msm_cci_init:1385: hw_version = 0x10040000
966[01-01 00:00:01.913] [1][6: synaptics_rmi4_]pzh:fwu_get_device_config_id---f34_fd.ctrl_base_addr=0x13
967[01-01 00:00:02.086] [0][1: swapper/0]s5k2t8_checksum_eeprom :1651: PCB version  = 0x8
968[01-01 00:00:02.086] [0][1: swapper/0]s5k2t8_checksum_eeprom :1721: cal info checksum rc = 0x0
969[01-01 00:00:02.086] [0][1: swapper/0]s5k2t8_validflag_check_eeprom :1753: valid info flag = 0x0  true
970[01-01 00:00:02.086] [0][1: swapper/0]ZTE_CAMERA:parse_module_name:728:sensor_module_name = semco_s5k2t8
971[01-01 00:00:02.090] [0][1: swapper/0]msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
972[01-01 00:00:02.093] [0][1: swapper/0]msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
973[01-01 00:00:02.093] [0][1: swapper/0]msm_ois_platform_probe:1061 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
974[01-01 00:00:02.093] [0][1: swapper/0]msm_ois_enable_debugfs:359:  E
975[01-01 00:00:02.093] [0][1: swapper/0]msm_ois_enable_debugfs:408: X
976[01-01 00:00:02.093] [0][1: swapper/0]qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
977[01-01 00:00:02.103] [2][1: swapper/0]msm_sensor_driver_get_dt_data:1154, ois enable gpio not specified
978[01-01 00:00:02.103] [2][1: swapper/0]msm_sensor_driver_get_dt_data:1154, ois enable gpio not specified
979[01-01 00:00:02.110] [2][1: swapper/0]MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
980[01-01 00:00:02.110] [2][1: swapper/0]MSM-CPP cpp_init_hardware:881 stream_cnt:0
981[01-01 00:00:02.123] [3][1: swapper/0]__msm_jpeg_init:1537] Jpeg Device id 0
982[01-01 00:00:02.126] [3][1: swapper/0]__msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
983[01-01 00:00:02.130] [3][1: swapper/0]msm_fd_hw_set_dt_parms_by_name: Error property does not exist
984[01-01 00:00:02.230] [3][1: swapper/0]msm_fd aa4000.qcom,fd: Face detection halt timeout
985[01-01 00:00:02.230] [3][1: swapper/0]SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
986[01-01 00:00:02.233] [2][1: swapper/0]FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
987[01-01 00:00:02.233] [2][1: swapper/0]SMBCHG: smbchg_probe: USB supply not found, deferring probe
988[01-01 00:00:02.233] [2][1: swapper/0]unable to find DT imem DLOAD mode node
989[01-01 00:00:02.236] [2][1: swapper/0]unable to find DT imem EDLOAD mode node
990[01-01 00:00:02.236] [2][1: swapper/0]zte_restart set_dload_mode 1, param=1
991[01-01 00:00:02.276] [3][1: swapper/0]device-mapper: uevent: version 1.0.3
992[01-01 00:00:02.276] [3][1: swapper/0]device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
993[01-01 00:00:02.276] [3][1: swapper/0]device-mapper: req-crypt: dm-req-crypt successfully initalized.
994[01-01 00:00:02.276] [3][1: swapper/0]
995[01-01 00:00:02.276] [3][1: swapper/0]Bluetooth: ffffffc0f989bd30
996[01-01 00:00:02.276] [3][1: swapper/0]Bluetooth: ffffffc0f989bd10[01-01 00*00:02.280] [3][1: swapper/0]bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
997[01-01 00:00:02.280] [3][1: swapper/0]bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
998[01-01 00:00:02.280] [3][1: swapper/0]bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
999[01-01 00:00:02.280] [3][1: swapper/0]bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1000[01-01 00:00:02.280] [3][1: swapper/0]sdhci: Secure Digital Host Controller Interface driver
1001[01-01 00:00:02.280] [3][1: swapper/0]sdhci: Copyright(c) Pierre Ossman
1002[01-01 00:00:02.280] [3][1: swapper/0]sdhci-pltfm: SDHCI platform and OF driver helper
1003[01-01 00:00:02.280] [3][1: swapper/0]qcom_ice_get_pdevice: found ice device ffffffc0f6803400
1004[01-01 00:00:02.280] [3][1: swapper/0]qcom_ice_get_pdevice: matching platform device ffffffc0f8804000
1005[01-01 00:00:02.280] [3][1: swapper/0]sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
1006[01-01 00:00:02.296] [0][1: swapper/0]sdhci_msm 74a4900.sdhci: No vmmc regulator found
1007[01-01 00:00:02.296] [0][1: swapper/0]sdhci_msm 74a4900.sdhci: No vqmmc regulator found
1008[01-01 00:00:02.296] [0][1: swapper/0]mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
1009[01-01 00:00:02.336] [0][1: swapper/0]hidraw: raw HID events driver (C) Jiri Kosina
1010[01-01 00:00:02.336] [0][1: swapper/0]usbcore: registered new interface driver usbhid
1011[01-01 00:00:02.336] [0][1: swapper/0]usbhid: USB HID core driver
1012[01-01 00:00:02.340] [0][1: swapper/0]ashmem: initialized
1013[01-01 00:00:02.343] [2][1: swapper/0]qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1014[01-01 00:00:02.346] [2][1: swapper/0]Haptics: sw:act_type=LRA hw:is_haptics=1(LRA)
1015[01-01 00:00:02.523] [0][1: swapper/0]msm_pcie_enable: PCIe RC1 link initialization failed
1016[01-01 00:00:02.526] [0][1: swapper/0]msm_pcie_enumerate: PCIe: failed to enable RC1.
1017[01-01 00:00:02.526] [0][1: swapper/0]msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
1018[01-01 00:00:02.526] [0][1: swapper/0]msm_11ad: probe of soc:qcom,wil6210 failed with error -1
1019[01-01 00:00:02.533] [0][1: swapper/0]bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1020[01-01 00:00:02.533] [0][1: swapper/0]arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1021[01-01 00:00:02.533] [0][1: swapper/0]arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1022[01-01 00:00:02.540] [0][1: swapper/0]m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1023[01-01 00:00:02.543] [3][1: swapper/0]devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1024[01-01 00:00:02.543] [3][1: swapper/0]devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1025[01-01 00:00:02.543] [3][1: swapper/0]devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1026[01-01 00:00:02.543] [3][1: swapper/0]devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1027[01-01 00:00:02.546] [3][1: swapper/0]devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1028[01-01 00:00:02.550] [3][1: swapper/0]usbcore: registered new interface driver snd-usb-audio
1029[01-01 00:00:02.550] [3][1: swapper/0]	[AK4490] ak4490_modinit(1531)
1030[01-01 00:00:02.550] [3][1: swapper/0]	[LHS][AK4490] ak4490_i2c_probe(1458)
1031[01-01 00:00:02.550] Z3][1: swapper/0][LHS]ak4490_populate_dt_pdata in 3333 
1032[01-01 00:00:02.553] [3][1: swapper/0]ak4490_populate_dt_pdata hifi_pop_gpio(74) success
1033[01-01 00:00:02.553] [3][1: swapper/0][LHS] ak4490_initial_gpio ldo -- enable !
1034[01-01 00:00:02.656] [1][1: swapper/0][LHS]ak4490_initial_gpio system up ,ak4490 initial_gpio success!default setting : hifi swith power on , switch mute on , select ak4961, all others off 
1035[01-01 00:00:02.656] [1][1: swapper/0][LHS]ak4490_i2c_probe dev name--------sungang ak4490
1036[01-01 00:00:02.656] [1][1: swapper/0][LHS]ak4490_i2c_probe leave ret=0
1037[01-01 00:00:02.656] [1][1: swapper/0]isl98608_init 
1038[01-01 00:00:02.656] [1][1: swapper/0]isl98608_i2c_probe enter
1039[01-01 00:00:02.656] [1][1: swapper/0]ak8157_init 
1040[01-01 00:00:02.656] [1][1: swapper/0]ak8157_i2c_probe enter
1041[01-01 00:00:02.656] [1][1: swapper/0][LHS]ak8157_i2c_probe(): reset success! 
1042[01-01 00:00:02.656] [1][1: swapper/0][LHS]ak8157_i2c_probe(): reset tmp success! 
1043[01-01 00:00:02.656] [1][1: swapper/0]i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x25 (ok)
1044[01-01 00:00:02.660] [1][1: swapper/0][LHS]ak8157_config_init ret1 = e7,ret2 = 0
1045[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1046[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1047[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1048[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1049[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1050[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1051[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1052[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1053[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1054[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1055[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1056[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1057[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1058[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1059[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1060[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1061[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1062[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1063[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1064[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1065[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1066[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1067[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1068[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1069[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1070[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1071[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1072[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1073[01-01 00:00:02.673] [2][1: swapper/0]msm,dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1074[01-01 00:00:02.673] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1075[01-01 00:00:02.676] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1076[01-01 00:00:02.676] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1077[01-01 00:00:02.676] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1078[01-01 00:00:02.676] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1079[01-01 00:00:02.676] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1080[01-01 00:00:02.676] [2][1: swapper/0]msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1081[01-01 00:00:02.676] [2][1: swapper/0]msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1082[01-01 00:00:02.686] [2][1: swapper/0]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1083[01-01 00:00:02.686] [2][1: swapper/0]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1084[01-01 00:00:02.690] [2][1: swapper/0]GACT probability NOT on
1085[01-01 00:00:02.690] [2][1: swapper/0]Mirror/redirect action on
1086[01-01 00:00:02.690] [2][1: swapper/0]u32 classifier
1087[01-01 00:00:02.690] [2][1: swapper/0]    Actions configured
1088[01-01 00800:02.690] [2][1: swapper/0]Netfilter messages via NETLINK v0.30.
1089[01-01 00:00:02.690] [2][1: swapper/0]nfnl_acct: registering with nfn%tlink.
1090K01-01 00:00:02.690] [2][1: swapper/0]nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1091[01-01 00:00:02.690] [2][1: swapper/0]ctnetlink v0.93: registering with nfnetlink.
1092[01-01 00:00:02.690] [2][1: swapper/0]xt_time: kernel timezone is -0000
1093[01-01 00:00:02.690] [2][1: swapper/0]ip_tables: (C) 2000-2006 Netfilter Core Team
1094[01-01 00:00:02.690] [2][1: swapper/0]arp_tables: (C) 2002 David S. Miller
1095[01-01 00:00:02.690] [2][1: swapper/0]TCP: cubic registered
1096[01-01 00:00:02.690] [2][1: swapper/0]Initializing XFRM netlink socket
1097[01-01 00:00:02.690] [2][1: swapper/0]NET: Registered protocol family 10
1098[01-01 00:00:02.690] [0][1: swapper/0]mip6: Mobile IPv6
1099[01-01 00:00:02.690] [0][1: swapper/0]ip6_tables: (C) 2000-2006 Netfilter Core Team
1100[01-01 00:00:02.690] [0][1: swapper/0]sit: IPv6 over IPv4 tunneling driver
1101[01-01 00:00:02.693] [2][1: swapper/0]NET: Registered protocol family 17
1102[01-01 00:00:02.693] [2][1: swapper/0]NET: Registered protocol family 15
1103[01-01 00:00:02.693] [2][1: swapper/0]bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1104[01-01 00:00:02.693] [2][1: swapper/0]Bridge firewalling registered
1105[01-01 00:00:02.693] [2][1: swapper/0]Ebtables v2.0 registered
1106[01-01 00:00:02.693] [3][1: swapper/0]Bluetooth: ffffffc0f989bce0
1107[01-01 00:00:02.693] [3][1: swapper/0]Bluetooth: ffffffc0f989bcd0Bluetooth: ffffffc0f989bd10
1108[01-01 00:00:02.693] [3][1: swapper/0]Bluetooth: ffffffc0f989bcf0Bluetooth: ffffffc0f989bcf0
1109[01-01 00:00:02.693] [3][1: swapper/0]Bluetooth: ffffffc0f989bcd0Bluetooth: ffffffc0f989bd40
1110[01-01 00:00:02.693] [3][1: swapper/0]Bluetooth: ffffffc0f989bd20[01-01 00:00:02.693] [3][1: swapper/0]l2tp_core: L2TP core driver, V2.0
1111[01-01 00:00:02.693] [3][1: swapper/0]l2tp_ppp: PPPoL2TP kernel driver, V2.0
1112[01-01 00:00:02.693] [3][1: swapper/0]l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1113[01-01 00:00:02.693] [3][1: swapper/0]l2tp_netlink: L2TP netlink interface
1114[01-01 00:00*02.693] [3][1: swapper/0]l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1115[01-01 00:00:02.693] [3][1: swapper/0]l2tp_debugfs: L2TP debugfs support
1116[01-01 00:00:02.693] [3][1: swapper/0]l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1117[01-01 00:00:02.693] [3][1: swapper/0]NET: Registered protocol family 27
1118[01-01 00:00:02.693] [0][6: socket_init_wor][PM-IPC] register ipc00000006_socket_init_wor
1119[01-01 00:00:02.693] [3][248: socket_init_wor][PM-IPC] register ipc00000007_socket_init_wor
1120[01-01 00:00:02.693] [1][51: socket_init_wor][PM-IPC] register ipc00000008_socket_init_wor
1121[01-01 00:00:02.693] [0][6: socket_init_wor][PM-IPC] register ipc00000009_socket_init_wor
1122[01-01 00:00:02.693] [3][248: socket_init_wor][PM-IPC] register ipc0000000a_socket_init_wor
1123[01-01 00:00:02.693] [1][51: socket_init_wor][PM-IPC] register ipc0000000b_socket_init_wor
1124[01-01 00:00:02.693] [0][6: socket_init_wor][PM-IPC] register ipc0000000c_socket_init_wor
1125[01-01 00:00:02.693] [3][248: socket_init_wor][PM-IPC] register ipc0000000d_socket_init_wor
1126[01-01 00:00:02.693] [1][51: socket_init_wor][PM-IPC] register ipc0000000e_socket_init_wor
1127[01-01 00:00:02.693] [0][6: socket_init_wor][PM-IPC] register ipc0000000f_socket_init_wor
1128[01-01 00:00:02.693] [3][248: socket_init_wor][PM-IPC] register ipc00000010_socket_init_wor
1129[01-01 00:00:02.693] [1][51: socket_init_wor][PM-IPC] register ipc00000011_socket_init_wor
1130[01-01 00:00:02.693] [0][6: cntl_socket_ini][PM-IPC] register ipc00000012_cntl_socket_ini
1131[01-01 00:00:02.693] [0][6: deferred_probe_]usb_otg_vreg: no parameters
1132[01-01 00:00:02.696] [0][6: deferred_probe_]reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1133[01-01 00:00:02.696] [0][6: deferred_probe_]reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1134[01-01 00:00:02.696] [0][6: deferred_probe_]subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1135[01-01 00:00:02.700] [0][6: deferred_probe_]subsys-pil-tz 1c00000.qcom,ssc: for slpi segmants only will be dumped.
1136[01-01 00:00:02.700] [0][6: deferred_probe_]pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1137[01-01 00:00:02.700] [0][6: deferred_probe_]pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1138[01-01 00:00:02.703] [0][6: deferred_probe_]sps:BAM 0x0000000006b04000 is registered.
1139[01-01 00:00:02.706] [0][6: deferred_probe_]qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1140[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_check_chg_version: pmic=PMI8996, wa_flags=0xf0, hvdcp_supported=true
1141[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smb_parse_dt: parallel usb thr: 1000, 9v thr: 900
1142[01-01 00:00:02.706] [0][6: deferred_probe_]smbcharger_charger_otg: no parameters
1143[01-01 00:00:02.706] [0][6: deferred_probe_]smbcharger_external_otg: no parameters
1144[01-01 00:00:02.706] [0][6: deferred_probe_]smbcharger_external_otg: supplied by pmi8994_boost_5v
1145[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 2.1
1146[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 180s
1147[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_hw_init: set vfloat to 4400
1148[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_fastchg_current_comp_set: ZTE i=1,comp_current=900 
1149[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_hw[init: set fastchg current comp to 900
1150[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_hw_init: set float voltage comp to 10
1151[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCHG: smbchg_iterm_set: set tcc (150) to 0x03
1152[01-01 00:00:02.706] [0][6: deferred_probe_]SMBCH: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1153[01-01 00:00:02.706] [0]Z257: smbchg_vfloat_a]SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1154[01-01 00:00:02.743] [0][6: deferred_probe_]SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
1155[01-01 00:00:02.743] [0][257: status_change_w]------------[ cut here ]------------
1156[01-01 00:00:02.743] [0][257: status_change_w]WARNING: CPU: 0 PID: 257 at /mnt/foo/halium-dev/kernel/zte/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
1157[01-01 00:00:02.743] [0][257: status_change_w]Unbalanced enable for IRQ 226
1158[01-01 00:00:02.743] [0][257: status_change_w]CPU: 0 PID: 257 Comm: status_change_w Not tainted 3.18.31-lineageos-g447e97a7ff9-dirty #2
1159[01-01 00:00:02.743] [0][257: status_change_w]Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
1160[01-01 00:00:02.743] [0][257: status_change_w]Workqueue: events status_change_work
1161[01-01 00:00:02.743] [0][257: status_change_w]Call trace:
1162[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc000088934>] dump_backtrace+0x0/0x23c
1163[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc000088b84>] show_stack+0x14/0x1c
1164[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc000e8a48c>] dump_stack+0x88/0xac
1165[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000a0f58>] warn_slowpath_common+0x88/0xb0
1166[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000a0ffc>] warn_slowpath_fmt+0x50/0x58
1167[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000f0c74>] __enable_irq+0x40/0x88
1168[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000f0d24>] enable_irq+0x68/0x78
1169[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc000800e38>] status_change_work+0x154/0xb4c
1170[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000b5f4c>] process_one_work+0x29c/0x490
1171[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000b6464>] worker_thread+0x324/0x440
1172[01-01 00:00:02.743] [0][257: status_change_w][<ffffffc0000bafc8>] kthread+0xe0/0xe8
1173[01-01 00:00:02.743] [0][257: status_change_w]---[ end trace 3d30b23cc9895028 ]---
1174[01-01 00:00:02.743] [1][6: deferred_probe_]SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 3000, set to 3000
1175[01-01 00:00:02.743] [1][6: deferred_probe_]SMBCHG: batt_pres_handler: triggered: 0x00
1176[01-01 00:00:02.743] [1][6: deferred_probe_]SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1177[01-01 00:00:02.743] [1][258: smbchg_vfloat_a]SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1178[01-01 00:00:02.743] [1][6: deferred_probe_]SMBCHG: batt_hot_handler: triggered: 0x00
1179[01-01 00:00:02.743] [1][6: deferred_probe_]SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1180[01-01 00:00:02.746] [1][345: smbchg_vfloat_a]SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1181[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: batt_warm_handler: triggered: 0x00
1182[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: batt_cool_handler: triggered: 0x00
1183[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: batt_cold_handler: triggered: 0x00
1184[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1185[01-01 00:00:02.746] [0][35: smbchg_vfloat_a]SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1186[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: src_detect_handler:  chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1187[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: triggered
1188[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1189[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1190[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1191[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1192[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1193[01-01 00:00:02.746] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: setting usb psy health GOOD
1194[01-01 00:00:02.746] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:2, val:1
1195[01-01 00:00:02.746] [0][257: smbchg_usb_upda]SMBCHG: smbchg_usb_update_online_work: chip->usb_online:-22,online:1,user_enabled:1,chip->usb_present:1,chip->very_weak_charger:0
1196[01-01 00:00:02.746] [0][257: smbchg_usb_upda]SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
1197[01-01 00:00:02.746] [0][257: smbchg_usb_upda]dwc3_msm_power_set_property_usb, event:4, val:1
1198[01-01 00:00:02.750] [0][6: deferred_probe_]SMB1351 smb1351_parallel_set_chg_present: smb1351_is_good=1 ,ZTE get SMB135X version =2 successful.
1199[01-01 00:00:02.753] [0][6: deferred_probe_]SMBCHG: determine_initial_status: setting usb psy dp=f dm=f
1200[01-01 00:00:02.753] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:94, val:8
1201[01-01 00:00:02.753] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: triggered
1202[01-01 00:00:02.753] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1203[01-01 00:00:02.753] [0][6: deferred_probe_]SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1204[01-01 00:00:02.753] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: setting usb psy health GOOD
1205[01-01 00:00:02.753] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:2, val:1
1206[01-01 00:00:02.753] [0][257: smbchg_usb_upda]SMBCHG: smbchg_usb_update_online_work: chip->usb_online:1,online:1,user_enabled:1,chip->usb_present:1,chip->very_weak_charger:0
1207[01-01 00:00:02.753] [0][6: deferred_probe_]SMB1351 smb1351_parallel_set_chg_present: smb1351_is_good=1 ,ZTE get SMB135X version =2 successful.
1208[01-01 00:00:02.753] [0][6: deferred_probe_]SMBCHG: usbid_change_handler: triggered
1209[01-01 00:00:02.776] [0][6: deferred_probe_]SMBCHG: is_otg_present_schg: USBID = 0x0fff, too high to be ground
1210[01-01 00:00:02.776] [0][6: deferred_probe_]SMBCHG: usbid_change_handler: setting usb psy OTG = 0
1211[01-01 00:00:02.776] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:66, val:0
1212[01-01 00:00:02.776] [0][6: deferred_probe_]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2915640, ocv=4369939, ibat=126540, rbatt=229272
1213[01-01 00:00:02.776] [0][6: deferred_probe_]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1214[01-01 00:00:02.793] [0][6: deferred_probe_]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1215[01-01 00:00:02.793] [0][257: power_supply_ch]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2915640, ocv=4369939, ibat=126540, rbatt=229272
1216[01-01 00:00:02.793] [0][256: power_supply_ch]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1217[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1218[01-01 00:00:02.796] [0][6: deferred_probe_]qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1219[01-01 00:00:02.796] [0][6: deferred_probe_]SMBCHG: smbchg_probe: chip->usb_present = 1 during boot
1220[01-01 00:00:02.796] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: triggered
1221[01-01 00:00:02.796] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1222[01-01 00:00:02.796] [0][6: deferred_probe_]SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1223[01-01 00:00:02.796] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:61, val:4
1224[01-01 00:00:02.796] [0][6: deferred_probe_]msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1225[01-01 00:00:02.796] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: setting usb psy present = 1
1226[01-01 00:00:02.796] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:3, val:1
1227[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1228[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1229[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_external_power_changed: current_limit = 0,charge_type_oem = -1,chip->apsd_rerun_flag:0
1230[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
1231[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1232[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1233[01-01 00:00:02.796] [2][366: irq/218-power-o]SMBCHG: power_ok_handler: triggered: 0x00
1234[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1235[01-01 00:00:02.796] [0][257: power_supply_ch]SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1236[01-01 00:00:02.796] [0][257: dwc3_otg_sm_wor]msm-dwc3 6a00000.ssusb: dwc3 otg_state = 0, inputs = 3, chg_type = 1
1237[01-01 00:00:02.796] [0][35: smbchg_parallel]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1238[01-01 00:00:02.796] [0][6: deferred_probe_]SMBCHG: handle_usb_insertion: setting usb psy health GOOD
1239[01-01 00:00:02.796] [0][6: deferred_probe_]dwc3_msm_power_set_property_usb, event:2, val:1
1240[01-01 00:00:02.796] [0][4: smbchg_vfloat_a]SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1241[01-01 00:00:02.800] [1][6: deferred_probe_]SMB1351 smb1351_parallel_set_chg_present: smb1351_is_good=1 ,ZTE get SMB135X version =2 successful.
1242[01-01 00:00:02.800] [0][4: power_supply_ch]SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
1243[01-01 00:00:02.800] [0][370: smbchg_usb_upda]SMBCHG: smbchg_usb_update_online_work: chip->usb_online:1,online:1,user_enabled:1,chip->usb_present:1,chip->very_weak_charger:0
1244[01-01 00:00:02.800] [0][4: power_supply_ch]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2915640, ocv=4369939, ibat=126540, rbatt=229272
1245[01-01 00:00:02.800] [0][4: power_supply_ch]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1246[01-01 00:00:02.800] [1][6: deferred_probe_]qpnp-smbcharger qpnp-smbcharger,16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1247[01-01 00:00:02.800] [1][6: deferred_probe_]qpnp-smbcharger qpnp-smbcharger-16: s3_src_reg: 2
1248[01-01 00:00:02.800] [0][369: power_supply_ch]SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1249[01-01 00:00:02.800] [0][369: power_supply_ch]SMBCHG: smbchg_external_power_changed: current_limit = 0,charge_type_oem = -1,bhip->apsd_rerun_flag:0
1250[01-01 00:00:02.800] [0][369: power_supply_ch]SMBCHG smbchg_external_power_changed: usb type = SDP current_limit = 0
1251[01-01 00:00:02.800] [0][369: power_supply_ch]SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1252[01-01 00:00:02.800] [0][369: smbchg_vfloat_a]SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1253[01-01 00:00:02.800] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1254[01-01 00:00:02.800] [0][4: power_supply_ch]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1255[01-01 00:00:02.800] [0][4: power_supply_ch]SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
1256[01-01 00:00:02.803] [0][4: power_supply_ch]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2915640, ocv=4369939, ibat=126540, rbatt=229272
1257[01-01 00:00:02.803] [0][4: power_supply_ch]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1258[01-01 00:00:02.803] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1259[01-01 00:00:02.803] [1][6: deferred_probe_]usb_otg_vreg: no parameters
1260[01-01 00:00:02.803] [1][6: deferred_probe_]usb_otg_vreg: supplied by smbcharger_external_otg
1261[01-01 00:00:02.803] [0][4: power_supply_ch]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1262[01-01 00:00:02.803] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1263[01-01 00:00:02.806] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1264[01-01 00:00:02.806] [3][1: swapper/0]zte log address __log_buf: 0xffffffc001825828
1265[01-01 00:00:02.806] [3][1: swapper/0]registered taskstats version 1
1266[01-01 00:00:02.806] [3][1: swapper/0]Key type encrypted regispered
1267[01-01 00:00:02.810] [3][1: swapper/0]fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1268[01-01 00:00:02.810] [3][1: swapper/0]adsprpc: channel link type: 0
1269[01-01 00:00:02.816] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_`soc_machine_probe: matched codec is tomtom_codec.
1270[01-01 00:00:02.820] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1271[01-01 00:00:02.820] [3][1: swapper/0]RNDIS_IPA module is loaded.
1272[01-01 00:00:02.820] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1273[01-01 00:00:02.820] [3][1: swapper/0]file system registered
1274[01-01 00:00:02.820] [3][1: swapper/0]mbim_init: initialize 1 instances
1275[01-01 00:00:02.820] [3][1: swapper/0]mbim_init: Initialized 1 ports
1276[01-01 00:00:02.820] [0][257: dwc3_otg_sm_wor]dwc3_uevent: sent uevent USB_STATE=ONLINE
1277[01-01 00:00:02.820] [3][1: swapper/0]------------[ cut here ]------------
1278[01-01 00:00:02.820] [3][1: swapper/0]WARNING: CPU: 3 PID: 1 at /mnt/foo/halium-dev/kernel/zte/msm8996/drivers/base/core.c:551 device_create_file+0xa0/0xb0()
1279[01-01 00:00:02.820] [3][1: swapper/0]Attribute transports_init: read permission without 'show'
1280[01-01 00:00:02.820] [3][1: swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W      3.18.31-lineageos-g447e97a7ff9-dirty #2
1281[01-01 00:00:02.820] [3][1: swapper/0]Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
1282[01-01 00:00:02.820] [3][1: swapper/0]Call trace:
1283[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000088934>] dump_backtrace+0x0/0x23c
1284[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000088b84>] show_stack+0x14/0x1c
1285[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000e8a48c>] dump_stack+0x88/0xac
1286[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc0000a0f58>] warn_slowpath_common+0x88/0xb0
1287[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc0000a0ffc>] warn_slowpath_fmt+0850/0x58
1288[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc00053f074>] device_create_file+0xa0/0xb0
1289[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc0006bbd4c>] android_bind+0x220/0x2e8
1290[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000690184>] composite_bind+0x84/0x17c
1291[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000690f24>] udc_bind_to_driver+0x38/0xc8
1292[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000691720>] usb_gadget_probe_driver+0x98/0xb4
1293[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000690344>] usb_composite_probe+0xc8/0xd8
1294[01)01 00:00:02.820] [3][1: swapper/0][<ffffffc0006d821c>] android_probe+0x730/0x908
1295[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000544254>] platform_drv_probe+0x38/0x84
1296[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000542b44>] driver_probe_device+0xd4/0x224
1297[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000542d44>] __driver_attach+0x64/0x90
1298[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000541384>] bus_for_each_dev+0x74/0x90
1299[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000542e2c>] driver_attach+0x20/0x28
1300[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000541be0>] bus_add_driver+0xf0/0x1c0
1301[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000543820>] driver_register+0x94/0xe0
1302[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000544c7c>] __platform_driver_register+0x60/0x68
1303[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc0015f2b70>] init+0x38/0xb4
1304[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc0015b4b20>] do_one_initcall+0x188/0x1a4
1305[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc0015b4cfc>] kernel_init_freeable+0x1c0/0x25c
1306[01-01 00:00:02.820] [3][1: swapper/0][<ffffffc000e84a04>] kernel_init+0x14/0xd4
1307[01-01 00:00:02.820] [3][1: swapper/0]---[ end trace 3d30b23cc989502a ]---
1308[01-01 00:00:02.823] [0][257: dwc3_otg_sm_wor]usb vbus activate: 1, softconnect: 0
1309[01-01 00:00:02.823] [3][1: swapper/0]rndis_qc_init: initialize rndis QC instance
1310[01-01 00:00:02.823] [3][1: swapper/0]Number of LUNs=8
1311[01-01 00:00:02.823] [3][1: swapper/0]Mass Storage Function, version: 2009/09/11
1312[01-01 00:00:02.823] [3][1: swapper/0]LUN: removable file: (no medium)
1313[01-01 00:00:02.823] [3][1: swapper/0]Number of LUNs=1
1314[01-01 00:00:02.823] [3][1: swapper/0]LUN: removable read only CD-ROM file: (no medium)
1315[01-01 00:00:02.823] [3][1: swapper/0]Number of LUNs=1
1316[01-01 00:00:02.823] [3][1: swapper/0]android_usb gadget: andrnid_usb ready
1317[01-01 00:00:02.823] [3][1: swapper/0usb: config_ftm_from_tag, 385: ftm_mode disable
1318[01-01 00:00:02.823] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1319[01-01 00:00:02.823] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1320[01-01 00:00:02.823] [3][1: swapper/0]input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
1321[01-01 00:00:02.823] [3][1: swapper/0]zte code=114,value=0
1322[01-01 00:00:02.823] [3][1: swapper/0]zte code=115,value=0
1323[05-26 02:35:20.500] [3][1: swapper/0]qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-05-26 02:35:20 UTC (12537320)
1324[05-26 02:35:20.500] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1325[05-26 02:35:20.500] [1][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1326[05-26 02:35:20.500] [3][1: swapper/0]zte_hall_probe +++++
1327[05-26 02:35:20.500] [3][1: swapper/0]zte_hall: translate hardware pin to system pin
1328[05-26 02:35:20.500] [3][1: swapper/0]zte_hall: sys_number=124 name=hall_en
1329[05-26 02:35:20.500] [3][1: swapper/0]input: Unspecified device as /devices/virtual/input/input5
1330[05-26 02:35:20.500] [3][1: swapper/0]set_hall_gpio_state success.
1331[05-26 02:35:20.500] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1332[05-26 02:35:20.500] [2][1: swapper/0]hallstate=0
1333[05-26 02:35:20.503] [3][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1334[05-26 02:35:20.503] [3][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1335[05-26 02:35:20.503] [2][1: swapper/0]Error: Driver 'msm-pm' is already registered, aborting...
1336[05-26 02:35:20.503] [3][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1337[05-26 02:35:20.506] [3][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1338[05-26 02:35:20.506] [3][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1339[05-26 02:35:20.510] [3][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1340[05-26 02:35:20.510] [2][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1341[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1342[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1343[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1344[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1345[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1346[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1347[05-26 02:35:20.510] [3][1: swapper/0]lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1348[05-26 02:35:20.510] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1349[05-26 02:35:20.513] [3][1: swapper/0]parse_cpu_levels: idx 1 545
1350[05-26 02:35:20.513] [3][1: swapper/0]parse_cpu_levels: idx 2 6022
1351[05-26 02:35:20.513] [3][1: swapper/0]parse_cpu_levels: idx 2 11499
1352[05-26 02:35:20.513] [3][1: swapper/0]parse_cpu_levels: idx 1 545
1353[05-26 02:35:20.513] [3][1: swapper/0]parse_cpu_levels: idx 2 6022
1354[05-26 02:35:20.513] [3][1: swapper/0]parse_cpu_levels: idx 2 11499
1355[05-26 02:35:20.513] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1356[05-26 02:35:20.513] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1357[05-26 02:35:20.516] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1358[05-26 02:35:20.516] [3][1: swapper/0]qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
1359[05-26 02:35:20.516] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec i3 tomtom_codec.
1360[05-26 02:35:20.516] [3][1: swapper/0]rmnet_ipa started initialization
1361[05-26 02:35:20.516] [3][1: swapper/0]IPA SSR support = True
1362[05-26 02:35:20.516] [3][1: swapper/0]IPA ipa-loaduC = True
1363[05-26 02:35:20.516] [3][1: swapper/0]IPA SG support = True
1364[05-26 02:35:20.516] [0][1: swapper/0][PM-IPC] register ipc00000013_swapper/0
1365[05-26 02:35:20.516] [0][1: swapper/0][PM-IPC] register ipc00000014_swapper/0
1366[05-26 02:35:20.520] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1367[05-26 02:35:20.520] [3][1: swapper/0]ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1368[05-26 02:35:20.520] [3][1: swapper/0]ipa ipa2_uc_state_check:301 uC is not loaded
1369[05-26 02:35:20.520] [3][1: swapper/0]rmnet_ipa completed initialization
1370[05-26 02:35:20.520] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1371[05-26 02:35:20.523] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1372[05-26 02:35:20.526] [3][1: swapper/0]qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1373[05-26 02:35:20.526] [3][1: swapper/0]usb_otg_vreg: disabling
1374[05-26 02:35:20.526] [3][1: swapper/0]wlan_en_vreg: disabling
1375[05-26 02:35:20.526] [3][1: swapper/0]rome_vreg: disabling
1376[05-26 02:35:20.526] [3][1: swapper/0]gdsc_mmagic_bimc: disabling
1377[05-26 02:35:20.526] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: chenjun:msm8996_asoc_machine_probe: matched codec is tomtom_codec.
1378[05-26 02:35:20.526] [3][1: swapper/0]kryo1-retention: disabling
1379[05-26 02:35:20.526] [3][1: swapper/0]kryo0-retention: disabling
1380[05-26 02:35:20.526] [3][1: swapper/0]gfx_mem_acc_corner: disabling
1381[05-26 02:35:20.526] [3][1: swapper/0]apcc_l3_mem_acc_corner: disabling
1382[05-26 02:35:20.526] [3][1: swapper/0]apc1_perfcl_mem_acc_corner: disabling
1383[05-26 02:35:20.526] [3][1: swapper/0]apc0_pwrcl_mem_acc_corner: disabling
1384[05-26 02:35:20.526] [3][1: swapper/0]regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1385[05-26 02:35:20.526] [3][1: swapper/0]clock_late_init: Removing enables held for handed-off clocks
1386[05-26 02:35:20.526] [2][6: deferred_probe_]msm8996-asoc-snd soc:sound-ak4961: ASoC: platform (null) not registered
1387[05-26 02:35:20.530] [3][1: swapper/0]ALSA device list:
1388[05-26 02:35:20.530] [3][1: swapper/0]  No soundcards found.
1389[05-26 02:35:20.530] [3][1: swapper/0]Freeing unused kernel memory: 516K (ffffffc0015b4000 - ffffffc001635000)
1390[05-26 02:35:20.530] [3][1: swapper/0]Freeing alternatives memory: 80K (ffffffc001635000 - ffffffc001649000)
1391[05-26 02:35:20.546] [2][428: systemd-udevd]random: systemd-udevd urandom read with 95 bits of entropy available
1392[05-26 02:35:20.726] [2][429: udevadm]SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
1393[05-26 02:35:20.726] [2][429: udevadm]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2619240, ocv=4369939, ibat=571140, rbatt=229272
1394[05-26 02:35:20.726] [2][429: udevadm]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1395[05-26 02:35:20.730] [2][429: udevadm]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1396[05-26 02:35:20.806] [1][429: udevadm]SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
1397[05-26 02:35:20.806] [0][429: udevadm]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2648880, ocv=4369939, ibat=526680, rbatt=229272
1398[05-26 02:35:20.806] [0][429: udevadm]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1399[05-26 02:35:20.810] [0][429: udevadm]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1400[05-26 02:35:20.843] [0][432: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1401[05-26 02:35:20.843] [2][435: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1402[05-26 02:35:20.850] [1][437: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1403[05-26 02:35:20.853] [0][433: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1404[05-26 02:35:20.853] [2][431: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1405[05-26 02:35:20.866] [1][430: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1406[05-26 02:35:20.870] [1][437: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1407[05-26 02:35:20.876] [2][441: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1408[05-26 02:35:20.876] [2][440: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1409[05-26 02:35:20.883] [2][451: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1410[05-26 02:35:20.886] [0][431: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1411[05-26 02:35:20.890] [1][448: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1412[05-26 02:35:20.893] [1][450: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1413[05-26 02:35:20.893] [2][440: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1414[05-26 02:35:20.893] [2][451: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1415[05-26 02:35:20.896] [0][434: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1416[05-26 02:35:20.900] [2][450: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1417[05-26 02:35:20.900] [2][441: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1418[05-26 02:35:20.903] [1][439: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1419[05-26 02:35:20.903] [0][436: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1420[05-26 02:35:20.903] [1][450: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1421[05-26 02:35:20.906] [2][433: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1422[05-26 02:35:20.910] [0][438: systemd-udevd]uFshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1423[05-26 02:35:20.916] [2][439: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1424[05-26 02:35:20.916] [1][435: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1425[05-26 02:35:20.916] [0][432: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1426[05-26 02:35:20.916] [1][452: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1427[05-26 02:35:20.920] [0][440: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1428[05-26 02:35:20.920] [0][437: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1429[05-26 02:35:20.920] [2][451: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1430[05-26 02:35:20.920] [2][441: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1431[05-26 02:35:20.923] [2][451: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1432[05-26 02:35:20.923] [1][430: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1433[05-26 02:35:20.926] [2][436: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1434[05-26 02:35:20.926] [2][433: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1435[05-26 02:35:20.926] [1][450: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1436[05-26 02:35:20.930] [2][439: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1437[05-26 02:35:20.930] [2][431: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1438[05-26 02:35:20.933] [2][441: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1439[05-26 02:35:20.936] [0][434: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1440[05-26 02:35:20.940] [1][438: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1441[05-26 02:35:20.940] [1][435: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer iq NULL!
1442[05-26 02:35:20.943] [2][433: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1443[05-26 02:35:20.946] [0][448: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1444[05-26 02:35:20.946] [1][450: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1445[05-26 02:35:20.946] [2][436: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1446[05-26 02:35:20.946] [0][432: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1447[05-26 02:35:20.953] [2][451: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1448[05-26 02:35:20.956] [1][452: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1449[05-26 02:35:20.956] [0][437: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1450[05-26 02:35:20.966] [2][430: systemd-udevd]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1451[05-26 02:35:20.970] [0][35: smbchg_parallel]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1452[05-26 02:35:20.970] [0][35: smbchg_parallel]SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1453[05-26 02:35:20.970] [0][35: smbchg_parallel]SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1454[05-26 02:35:20.986] [2][433: systemd-udevd]SMBCHG: get_prop_batt_status: CHGR_STS = 0x80
1455[05-26 02:35:20.986] [2][433: systemd-udevd]SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1996800, ocv=4369939, ibat=1504800, rbatt=229272
1456[05-26 02:35:20.986] [2][433: systemd-udevd]SMBCHG: smbchg_get_aicl_level_ma: aicl current=1700mA,reg:16
1457[05-26 02:35:20.990] [2][433: systemd-udevd]SMBCHG: smbchg_shipmode_get: get shipmode_test is 1
1458[05-26 02:35:21.113] [2][1: init]initrd: checking filesystem integrity for the userdata partition
1459[05-26 02:35:21.116] [3][464: exe]EXT3-fs (sda9): error: couldn't mount because of unsupported optiofal features (40)
1460[05-26 02:35:21.116] [3][464: exe]EXT2-fs (sda9): error: couldn't mount because of unsupported optional features (40)
1461[05-26 02:35:21.120] [3][464: exe]EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: errors=remount-ro
1462[05-26 02:35:21.120] [2][470: exe]ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
1463[05-26 02:35:21.143] [3][1: init]initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
1464[05-26 02:35:21.146] [3][474: dumpe2fs]dumpe2fs 1.43.4 (31-Jan-2017)
1465[05-26 02:35:21.150] [3][1: init]initrd: mounting /dev/sda9
1466[05-26 02:35:21.150] [2][477: exe]EXT3-fs (sda9): error: unrecognized mount option "discard" or missing value
1467[05-26 02:35:21.150] [2][477: exe]EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
1468[05-26 02:35:21.153] [3][477: exe]EXT4-fs (sda9): mounted filesystem with journalled data mode. Opts: discard,data=journal
1469[05-26 02:35:21.156] [3][1: init]initrd: boot mode: halium
1470[05-26 02:35:21.156] [3][1: init]initrd: Halium rootfs is /tmpmnt/rootfs.img 
1471[05-26 02:35:21.156] [3][1: init]initrd: mounting system rootfs at /halium-system
1472[05-26 02:35:21.156] [0][489: exe]EXT3-fs (loop0): error: couldn't mount because of unsupported optional features (240)
1473[05-26 02:35:21.160] [3][489: exe]EXT2-fs (loop0): error: couldn't mount because of unsupported optional features (240)
1474[05-26 02:35:21.163] [3][489: exe]EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
1475[05-26 02:35:21.163] [0][1: init]initrd: mounting /tmpmnt/rootfs.img (user mode)
1476[05-26 02:35:21.166] [2][496: exe]EXT4-fs (loop0): re-mounted. Opts: data=ordered
1477[05-26 02:35:21.170] [0][1: init]initrd: mounting android system image ro
1478[05-26 02:35:21.170] [0][1: init]initrd: mounting android system image from userdata partition
1479[05-26 02:35:21.173] [2][498: exe]EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (2c0)
1480[05-26 02:35:21.173] [2][498: exe]EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (2c0)
1481[05-26 02:35:21.176] [1][498: exe]EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
1482[05-26 02:35:21.176] [0][1: init]initrd: extracting android ramdisk
1483[05-26 02:35:21.250] [3][509: exe]8170 blocks
1484[05-26 02:35:21.250] [1][1: init]initrd: Normal boot
1485[05-26 02:35:21.250] [2][512: exe]mount: mounting /tmpmnt on /root/userdata failed: No such file or directory
1486[05-26 02:35:21.250] [2][513: init]mkdir: can't create directory '/root/android': Read-only file system
1487[05-26 02:35:21.250] [2][514: exe]mount: mounting none on /root/android failed: No such file or directory
1488[05-26 02:35:21.256] [2][517: init]mkdir: can't create directory '/root/android/': Read-only file system
1489[05-26 02:35:21.256] [2][517: init]mkdir: can't create directory '/root/android/': Read-only file system
1490[05-26 02:35:21.256] [3][518: init]mkdir: can't create directory '/root/data': Read-only file system
1491[05-26 02:35:21.256] [2][519: init]mkdir: can't create directory '/root/userdata': Read-only file system
1492[05-26 02:35:21.256] [2][520: exe]mount: mounting /tmpmnt on /root/userdata failed: No such file or directory
1493[05-26 02:35:21.256] [2][521: init]mkdir: can't create directory '/root/userdata/': Read-only file system
1494[05-26 02:35:21.256] [2][522: exe]mount: mounting /root/userdata/android-data on /root/data failed: No such file or directory
1495[05-26 02:35:21.256] [2][523: exe]mount: mounting /root/data on /root/android/data failed: No such file or directory
1496[05-26 02:35:21.260] [2][524: exe]mount: mounting /root/data on /android-rootfs/data failed: No such file or directory
1497[05-26 02:35:21.260] [2][525: init]mkdir: can't create directory '/root/userdata/': Read-only file system
1498[05-26 02:35:21.260] [2][526: init]chmod: /root/userdata/android-data/property: No such file or directory
1499[05-26 02:35:21.260] [1][1: init]/init: line 3: can't create /root/userdata/android-data.property/persist.halium.version.rootfs: nonexistent directory
1500[05-26 02:35:21.260] [1][1: init]/init: line 3: can't create /root/userdata/android-data/property/persist.halium.version.device: nonexistent directory
1501[05-26 02:35:21.260] [1][1: init]/init: line 3: can't create /root/userdata/android-data/property/persist.halium.version.custom: nonexistent directory
1502[05-26 02:35:21.260] [1][1: init]/init: line 3: can't create /root/userdata/android-data/property/persist.halium.version.channel: nonexistent directory
1503[05-26 02:35:21.260] [1][1: init]/init: line 3: can't create /root/userdata/android-data/property/persist.halium.version: nonexistent directory
1504[05-26 02:35:21.260] [1][1: init]/init: line 3: can't create /root/userdata/android-data/property/persist.halium.default_language: nonexistent directory
1505[05-26 02:35:21.260] [2][527: init]chmod: /root/userdata/android-data/property/persist.halium*: No such file or directory
1506[05-26 02:35:21.263] [1][1: init]initrd: device is axon7
1507[05-26 02:35:21.263] [1][1: init]initrd: This rootfs does not have any writable-paths defined
1508[05-26 02:35:21.266] [2][531: exe]mount: mounting /android-rootfs on /root/var/lib/lxc/android/rootfs failed: No such file or directory
1509[05-26 02:35:21.266] [1][1: init]initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
1510[05-26 02:35:21.270] [2][532: init]cat: can't open '/root/var/lib/lxc/android/rootfs/fstab*': No such file or directory
1511[05-26 02:35:21.270] [1][1: init]initrd: moving Android system to /android/system
1512[05-26 02:35:21.270] [2][534: exe]mount: mounting /android-system on /root/android/system failed: No such file or directory
1513[05-26 02:35:21.273] [2][535: exe]mount: mounting /root/usr/lib/lxc-android-config/70-axon7.rules on /root/lib/udev/rules.d/70-android.rules failed: No such file or directory
1514[05-26 02:35:21.273] [1][1: init]Begin: Running /scripts/local-bottom ... done.
1515[05-26 02:35:21.273] [1][1: init]done.
1516[05-26 02:35:21.273] [1][1: init]Begin: Running /scripts/nfs-bottom ... done.
1517[05-26 02:35:21.273] [1][1: init]Begin: Running /scripts/init-bottom ... done.
1518[02-11 16:28:00.000] [1][1: systemd]systemd[1]: System time before build time, advancing clock.
1519[02-11 16:28:00.006] [1][1: systemd]systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +IMOD -IDN)
1520[02-11 16:28:00.006] [1][1: systemd]systemd[1]: Detected architecture arm64.
1521[02-11 16:28:00.006] [1][1: systemd]systemd[1]: Set hostname to <localhost.localdomain>.
1522[02-11 16:28:00.006] [1][1: systemd]systemd[1]: Initializing machine ID from random generator.
1523[02-11 16:28:00.010] [1][1: systemd]systemd[1]: Installed transient /etc/machine-id file.
1524[02-11 16:28:00.090] [3][1: systemd]systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
1525[02-11 16:28:00.090] [3][1: systemd]systemd[1]: Started Forward Password Requests to Wall Directory Watch.
1526[02-11 16:28:00.090] [3][1: systemd]systemd[1]: Created slice System Slice.
1527[02-11 16:28:00.090] [3][1: systemd]systemd[1]: Listening on Journal Socket.
1528[02-11 16:28:00.093] [3][1: systemd]systemd[1]: Starting Nameserver information manager...
1529[02-11 16:28:00.093] [3][1: systemd]systemd[1]: Mounting Debug File System...
1530[02-11 16:28:00.093] [3][1: systemd]systemd[1]: Listening on Journal Socket (/dev/log).
1531[02-11 16:28:00.093] [3][1: systemd]systemd[1]: Started Trigger resolvconf update for networkd DNS.
1532[02-11 16:28:00.093] [3][1: systemd]systemd[1]: Reached target Swap.
1533[02-11 16:28:00.093] [3][1: systemd]systemd[1]: Reached target Paths.
1534[02-11 16:28:00.096] [3][1: systemd]systemd[1]: Created slice User and Session Slice.
1535[02-11 16:28:00.096] [3][1: systemd]systemd[1]: Reached target Remote File Systems (Pre).
1536[02-11 16:28:00.096] [3][1: systemd]systemd[1]: Started Read required files in advance.
1537[02-11 16:28:00.100] [0][1: systemd]systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
1538[02-11 16:28:00.100] [0][1: systemd]systemd[1]: Reached target Slices.
1539[02-11 16:28:00.100] [3][1: systemd]systemd[1]: Starting Set console keymap...
1540[02-11 16:28:00.103] [3][1: systemd]systemd[1]: Created slice system-lxc.slice.
1541[02-11 16:28:00.106] [3][1: systemd]systemd[1]: Listening on udev Control Socket.
1542[02-11 16:28:00.106] [3][1: systemd]systemd[1]: Listening on Journal Audit Socket.
1543[02-11 16:28:00.106] [3][1: systemd]systemd[1]: Reached target Remote File Systems.
1544[02-11 16:28:00.106] [3][1: systemd]systemd[1]: Listening on Syslog Socket.
1545[02-11 16:28:00.106] [3][1: systemd]systemd[1]: Starting Journal Service...
1546[02-11 16:28:00.106] [3][1: systemd]systemd[1]: Listening on udev Kernel Socket.
1547[02-11 16:28:00.110] [3][1: systemd]systemd[1]: Starting Remount Root and Kernel File Systems...
1548[02-11 16:28:00.110] [3][1: systemd]systemd[1]: Starting Create Static Device Nodes in /dev...
1549[02-11 16:28:00.110] [3][1: systemd]systemd[1]: Reached target Encrypted Volumes.
1550[02-11 16:28:00.116] [3][1: systemd]systemd[1]: Starting Load Kernel Modules...
1551[02-11 16:28:00.120] [3][1: systemd]systemd[1]: Mounted Debug File System.
1552[02-11 16:28:00.123] [3][1: systemd]systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
1553[02-11 16:28:00.123] [3][1: systemd]systemd[1]: ureadahead.service: Unit entered failed state.
1554[02-11 16:28:00.123] [3][1: systemd]systemd[1]: ureadahead.service: Failed with result 'exit-code'.
1555[02-11 16:28:00.126] [3][1: systemd]systemd[1]: Started Remount Root and Kernel File Systems.
1556[02-11 16:28:00.126] [2][1: systemd]systemd[1]: Started Load Kernel Modules.
1557[02-11 16:28:00.133] [2][1: systemd]systemd[1]: Started Nameserver information manager.
1558[02-11 16:28:00.150] [2][1: systemd]systemd[1]: Started Create Static Device Nodes in /dev.
1559[02-11 16:28:00.183] [2][1: systemd]systemd[1]: Started Set console keymap.
1560[02-11 16:28:00.220] [3][1: systemd]systemd[1]: Reached target Network (Pre).
1561[02-11 16:28:00.220] [3][1: syStemd]systemd[1]: Mounting Configuration File System...
1562[02-11 16:28:00.223] [3][1: systemd]systemd[1]: Starting Apply Kernel Variables...
1563[02-11 16:28:00.223] [3][1: systemd]systemd[1]: Mounting FUSE Control File System...
1564[02-11 16:28:00.226] [3][1: systemd]systemd[1]: Starting udev Coldplug all Devices...
1565[02-11 16:28:00.226] [3][1: systemd]systemd[1]: Starting Load/Save Random Seed...
1566[02-11 16:28:00.243] [3][1: systemd]systemd[1]: Failed to mount mount system.img.
1567[02-11 16:28:00.330] [1][1: systemd]systemd[1]: Failed to mount mount system.img.
1568[02-11 16:28:00.723] [0][720: bash]enable_store: android_usb: already disabled
1569[02-11 16:28:00.733] [0][731: gzip]msm-dwc3 6a00000.ssusb: SKIP setting power supply type again,chg_type = 1
1570[02-11 16:28:00.866] [0][744: NetworkManager]msm-dwc3 6a00000.ssusb: SKIP setting power supply type again,chg_type = 1
1571[02-11 16:28:01.010] [0][726: dbus-daemon]msm-dwc3 6a00000.ssusb: SKIP setting power supply type again,chg_type = 1
1572[02-11 16:28:01.013] [1][744: NetworkManager]ether_ioctl: [rndis0] error: ioctl called for unsupported cmd[35585]
1573[02-11 16:28:01.013] [1][744: NetworkManager]ipa-wan ipa_wwan_ioctl:1640 [rmnet_ipa0] unsupported cmd[35585]
1574[02-11 16:28:10.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1575[02-11 16:28:11.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1576[02-11 16:28:12.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1577[02-11 16:28:13.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1578[02-11 16:28:14.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1579[02-11 16:28:15.683] [0][4: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1580[02-11 16:28:16.683] [0][35: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1581[02-11 16:28:17.683] [0][35: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1582[02-11 16:28:18.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1583[02-11 16:28:19.106] [0][257: pwrkey_poweroff]pwrkey_poweroff: power key long pressed, trigger reboot
1584[02-11 16:28:19.683] [0][257: check_pwrkey+0x]check_pwrkey, power key not released, check it again
1585[02-11 16:2:20.683] [0][4: check_pwrkey+0x]check_pwrkey, power key not released, check it again