· 5 years ago · Feb 14, 2020, 05:38 AM
1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.18.31-TeamGhost-gdf100350-dirty (darkness@darkness-hidden-org-server) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Feb 11 06:52:57 WIB 2020
5[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
6[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
7[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8917-PMI8937 QRD SKU5
8[ 0.000000] efi: Getting EFI parameters from FDT:
9[ 0.000000] efi: UEFI not found.
10[ 0.000000] Reserved memory: reserved region for node 'other_ext_region@0': base 0x0000000084a00000, size 30 MiB
11[ 0.000000] Reserved memory: reserved region for node 'modem_region@0': base 0x0000000086800000, size 80 MiB
12[ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x000000008b800000, size 17 MiB
13[ 0.000000] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x000000008c900000, size 7 MiB
14[ 0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x0000000090000000, size 20 MiB
15[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
16[ 0.000000] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
17[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 80 MiB
18[ 0.000000] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
19[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b800000, size 17 MiB
20[ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
21[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c900000, size 7 MiB
22[ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
23[ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
24[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
25[ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
26[ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f9000000, size 112 MiB
27[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f9000000, size 112 MiB
28[ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
29[ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f8000000, size 16 MiB
30[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 16 MiB
31[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
32[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f7c00000, size 4 MiB
33[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7c00000, size 4 MiB
34[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
35[ 0.000000] cma: Reserved 16 MiB at 0x00000000f6c00000
36[ 0.000000] On node 0 totalpages: 510464
37[ 0.000000] DMA zone: 8192 pages used for memmap
38[ 0.000000] DMA zone: 0 pages reserved
39[ 0.000000] DMA zone: 510464 pages, LIFO batch:31
40[ 0.000000] psci: probing for conduit method from DT.
41[ 0.000000] psci: PSCIv1.0 detected in firmware.
42[ 0.000000] psci: Using standard PSCI v0.2 function IDs
43[ 0.000000] psci: Initializing psci_cpu_init
44[ 0.000000] psci: Initializing psci_cpu_init
45[ 0.000000] psci: Initializing psci_cpu_init
46[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc076a30000 s22144 r8192 d31104 u61440
47[ 0.000000] pcpu-alloc: s22144 r8192 d31104 u61440 alloc=15*4096
48[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
49[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502272
50[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78B0000 androidboot.selinux=permissive buildvariant=userdebug androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=47b3c1647d04 device_locked=0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_nt35521s_ebbg_720p_video:1:none:cfg:single_dsi board_id=S88503BC1:board_gpio_num=11 115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78B0000,console=tty0 androidboot.selinux=permissive androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
51[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
52[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
53[ 0.000000] Memory: 1712552K/2041856K available (12967K kernel code, 2085K rwdata, 6968K rodata, 508K init, 2491K bss, 329304K reserved)
54[ 0.000000] Virtual kernel memory layout:
55[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
56[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
57[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 MB actual)
58[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
59[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
60[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
61[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
62[ 0.000000] .init : 0xffffffc0013fa000 - 0xffffffc001479000 ( 508 KB)
63[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0013f9c64 ( 19944 KB)
64[ 0.000000] .data : 0xffffffc001496000 - 0xffffffc00169f400 ( 2085 KB)
65[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
66[ 0.000000] HMP scheduling enabled.
67[ 0.000000] Preemptible hierarchical RCU implementation.
68[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
69[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
70[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
71[ 0.000000] NR_IRQS:64 nr_irqs:64 0
72[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
73[ 0.000000] MPM 1 irq mapping errored -517
74[ 0.000000] Offload RCU callbacks from all CPUs
75[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
76[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
77[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
78[ 0.000020] Switched to clocksource arch_sys_counter
79[ 0.000613] Console: colour dummy device 80x25
80[ 0.002551] allocated 8388608 bytes of page_cgroup
81[ 0.002558] please try 'cgroup_disable=memory' option if you don't want memory cgroups
82[ 0.002571] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
83[ 0.002583] pid_max: default: 32768 minimum: 301
84[ 0.002657] Security Framework initialized
85[ 0.002682] AppArmor: AppArmor initialized
86[ 0.002688] Yama: becoming mindful.
87[ 0.002752] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
88[ 0.002763] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
89[ 0.003426] Initializing cgroup subsys memory
90[ 0.003448] Initializing cgroup subsys devices
91[ 0.003460] Initializing cgroup subsys freezer
92[ 0.003472] Initializing cgroup subsys blkio
93[ 0.003483] Initializing cgroup subsys perf_event
94[ 0.003708] /cpus/cpu-map/cluster0: empty cluster
95[ 0.003820] /cpus/cpu@100: Missing clock-frequency property
96[ 0.003837] /cpus/cpu@101: Missing clock-frequency property
97[ 0.003856] /cpus/cpu@102: Missing clock-frequency property
98[ 0.003875] /cpus/cpu@103: Missing clock-frequency property
99[ 0.003915] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
100[ 0.003950] EFI services will not be available.
101[ 0.012888]
102[ 0.012888] **********************************************************
103[ 0.012901] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
104[ 0.012908] ** **
105[ 0.012914] ** trace_printk() being used. Allocating extra memory. **
106[ 0.012921] ** **
107[ 0.012927] ** This means that this is a DEBUG kernel and it is **
108[ 0.012934] ** unsafe for produciton use. **
109[ 0.012940] ** **
110[ 0.012947] ** If you see this message and you are not debugging **
111[ 0.012953] ** the kernel, report this immediately to your vendor! **
112[ 0.012960] ** **
113[ 0.012966] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
114[ 0.012973] **********************************************************
115[ 0.015388] MSM Memory Dump base table set up
116[ 0.015414] MSM Memory Dump apps data table set up
117[ 0.015471] Configuring XPU violations to be fatal errors
118[ 0.024305] Brought up 4 CPUs
119[ 0.024318] SMP: Total of 4 processors activated.
120[ 0.024358] alternatives: patching kernel code
121[ 0.025085] devtmpfs: initialized
122[ 0.027354] evm: security.selinux
123[ 0.027362] evm: security.SMACK64
124[ 0.027368] evm: security.capability
125[ 0.029287] DMI not present or invalid.
126[ 0.038005] pinctrl core: initialized pinctrl subsystem
127[ 0.038506] regulator-dummy: no parameters
128[ 0.100210] NET: Registered protocol family 16
129[ 0.103603] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
130[ 0.120091] cpuidle: using governor ladder
131[ 0.140088] cpuidle: using governor menu
132[ 0.160087] cpuidle: using governor qcom
133[ 0.161897] vdso: 2 pages (1 code @ ffffffc00149d000, 1 data @ ffffffc00149c000)
134[ 0.162937] software IO TLB [mem 0xf2800000-0xf2c00000] (4MB) mapped at [ffffffc072800000-ffffffc072bfffff]
135[ 0.164052] DMA: preallocated 256 KiB pool for atomic allocations
136[ 0.171241] __of_mpm_init(): MPM driver mapping exists
137[ 0.180949] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
138[ 0.206342] sps:sps is ready.
139[ 0.209509] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
140[ 0.209638] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
141[ 0.209648] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
142[ 0.209661] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
143[ 0.209672] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
144[ 0.211925] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
145[ 0.212109] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
146[ 0.212123] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
147[ 0.212820] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
148[ 0.212977] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
149[ 0.212990] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
150[ 0.213697] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
151[ 0.213854] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
152[ 0.213867] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
153[ 0.214122] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
154[ 0.214133] msm_rpm_dev_probe: APSS-RPM communication over SMD
155[ 0.215468] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
156[ 0.216953] pm8917_s5: 1050 <--> 1350 mV at 1225 mV normal idle
157[ 0.217176] spm_regulator_probe: name=pm8917_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
158[ 0.222341] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
159[ 0.222356] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
160[ 0.225016] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
161[ 0.225390] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
162[ 0.230172] smd_channel_probe_now: allocation table not initialized
163[ 0.231487] smd_channel_probe_now: allocation table not initialized
164[ 0.232566] smd_channel_probe_now: allocation table not initialized
165[ 0.234061] msm-sn-fuse a0128.snfuse: SN interface initialized
166[ 0.234311] msm-secboot-fuse a41d0.secbootfuse: Secboot-fuse interface initialized
167[ 0.240505] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
168[ 0.241562] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
169[ 0.242073] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
170[ 0.242583] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
171[ 0.242907] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
172[ 0.243540] ACC: mem_acc_efuse_init: efuse_addr = 0x00000000000a4000 (len=0x1000)
173[ 0.243728] ACC: mem_acc_parse_override_fuse_version_map: qcom,override-fuse-version-map tuple match not found
174[ 0.243873] mem_acc_corner: 0 <--> 0 mV at 0 mV
175[ 0.244883] cpr_efuse_init: apc_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
176[ 0.244920] cpr_read_fuse_revision: apc_corner: fuse revision = 2
177[ 0.244936] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0xff8c821f691bec3, speed_bits = 0
178[ 0.244951] cpr_parse_pvs_version_fuse: apc_corner: [row: 37]: 0xff8c821f691bec3, pvs_version = 0
179[ 0.245036] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1095000 -> 1125000 uV
180[ 0.245050] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1145000 -> 1150000 uV
181[ 0.245064] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1260000 -> 1270000 uV
182[ 0.245080] cpr_pvs_init: apc_corner: pvs voltage: [1125000 1150000 1270000] uV
183[ 0.245091] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
184[ 0.245102] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
185[ 0.245293] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
186[ 0.245320] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
187[ 0.245350] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248e5a63eea12d69
188[ 0.245372] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 918
189[ 0.245383] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1006
190[ 0.245394] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1205
191[ 0.245421] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 968
192[ 0.245434] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1046
193[ 0.245447] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1255
194[ 0.245535] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.582
195[ 0.245545] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.680
196[ 0.245559] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 968
197[ 0.245568] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1046
198[ 0.245576] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1151
199[ 0.245584] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1255
200[ 0.245593] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1255
201[ 0.245767] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
202[ 0.246160] apc_corner: 0 <--> 0 mV
203[ 0.255729] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
204[ 0.256583] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
205[ 0.256727] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
206[ 0.256736] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
207[ 0.256749] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
208[ 0.256760] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
209[ 0.257129] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
210[ 0.257313] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
211[ 0.257327] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
212[ 0.257692] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
213[ 0.257847] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
214[ 0.257861] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
215[ 0.258233] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
216[ 0.258388] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
217[ 0.258401] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
218[ 0.258525] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
219[ 0.258535] msm_rpm_dev_probe: APSS-RPM communication over SMD
220[ 0.259357] pm8917_s1: 1000 <--> 1225 mV at 1000 mV normal idle
221[ 0.260282] pm8917_s2_level: 0 <--> 0 mV at 0 mV normal idle
222[ 0.260881] pm8917_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
223[ 0.261485] pm8917_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
224[ 0.262291] pm8917_s3: 1300 mV normal idle
225[ 0.263118] pm8917_s4: 2050 mV normal idle
226[ 0.263927] pm8917_l2: 1200 mV normal idle
227[ 0.264759] pm8917_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
228[ 0.265348] pm8917_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
229[ 0.266163] pm8917_l5: 1800 mV normal idle
230[ 0.267205] pm8917_l6: 1800 mV normal idle
231[ 0.268034] pm8917_l7: 1800 mV normal idle
232[ 0.268622] pm8917_l7_ao: 1800 mV normal idle
233[ 0.269446] pm8917_l8: 2850 <--> 2900 mV at 2900 mV normal idle
234[ 0.270279] pm8917_l9: 3000 <--> 3300 mV at 3000 mV normal idle
235[ 0.271111] pm8917_l10: 2800 <--> 3000 mV at 2800 mV normal idle
236[ 0.271920] pm8917_l11: 2950 mV normal idle
237[ 0.272750] pm8917_l12: 1800 <--> 2950 mV at 1800 mV normal idle
238[ 0.273549] pm8917_l13: 3075 mV normal idle
239[ 0.274381] pm8917_l14: 1800 <--> 3300 mV at 1800 mV normal idle
240[ 0.275187] pm8917_l15: 1800 <--> 3300 mV at 1800 mV normal idle
241[ 0.276009] pm8917_l16: 1800 mV normal idle
242[ 0.276815] pm8917_l17: 2800 <--> 2900 mV at 2800 mV normal idle
243[ 0.277653] pm8917_l19: 1225 <--> 1350 mV at 1225 mV normal idle
244[ 0.278455] pm8917_l22: 2800 mV normal idle
245[ 0.279288] pm8917_l23: 1200 mV normal idle
246[ 0.280446] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
247[ 0.302344] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
248[ 0.302563] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
249[ 0.302576] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
250[ 0.303860] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 0 and 3)
251[ 0.303871] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1125000
252[ 0.303880] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1270000
253[ 0.305148] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
254[ 0.305567] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
255[ 0.306923] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
256[ 0.307212] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
257[ 0.307466] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
258[ 0.307478] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
259[ 0.309693] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
260[ 0.309968] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
261[ 0.309980] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
262[ 0.311671] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
263[ 0.311930] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
264[ 0.311942] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
265[ 0.382559] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
266[ 0.385233] KPI: Bootloader start count = 47111
267[ 0.385245] KPI: Bootloader end count = 118227
268[ 0.385253] KPI: Bootloader display count = 95681
269[ 0.385260] KPI: Bootloader load kernel count = 1514
270[ 0.385268] KPI: Kernel MPM timestamp = 137298
271[ 0.385275] KPI: Kernel MPM Clock frequency = 32768
272[ 0.385301] socinfo_print: v0.10, id=303, ver=1.0, raw_id=86, raw_ver=0, hw_plat=8, hw_plat_ver=65536
273[ 0.385301] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=4136746691
274[ 0.386325] qpnp_pin_of_gpio_xlate: no such PMIC gpio 7 in device topology
275[ 0.386497] eldo2_pm8917: no parameters
276[ 0.387758] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
277[ 0.388162] tps65132-pos: 5000 mV
278[ 0.388563] tps65132-neg: 5000 mV
279[ 0.389067] vgaarb: loaded
280[ 0.390336] SCSI subsystem initialized
281[ 0.391388] usbcore: registered new interface driver usbfs
282[ 0.391472] usbcore: registered new interface driver hub
283[ 0.391622] usbcore: registered new device driver usb
284[ 0.392425] media: Linux media interface: v0.10
285[ 0.392499] Linux video capture interface: v2.00
286[ 0.392597] EDAC MC: Ver: 3.0.0
287[ 0.394714] cpufreq: driver msm up and running
288[ 0.394848] aw2013 led driver: initialize.aw2013_led_probe start
289[ 0.521101] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
290[ 0.521334] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
291[ 0.521678] ION heap system created
292[ 0.521793] ION heap mm created at 0x00000000f9000000 with size 7000000
293[ 0.521806] ION heap qsecom created at 0x00000000f8000000 with size 1000000
294[ 0.522313] msm_bus_fabric_init_driver
295[ 0.535933] heming add qpnp_pon_probe
296[ 0.536001] qcom,qpnp-power-on qpnp-power-on-5: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
297[ 0.536020] qcom,qpnp-power-on qpnp-power-on-5: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
298[ 0.536219] input: qpnp_pon as /devices/virtual/input/input0
299[ 0.536768] heming add qpnp_pon_probe end
300[ 0.536912] PMIC@SID0: PM8937 v1.0 options: 2, 2, 0, 0
301[ 0.538377] gdsc_venus: no parameters
302[ 0.538737] gdsc_mdss: no parameters
303[ 0.539058] gdsc_jpeg: no parameters
304[ 0.539625] gdsc_vfe: no parameters
305[ 0.540218] gdsc_vfe1: no parameters
306[ 0.540554] gdsc_cpp: no parameters
307[ 0.540871] gdsc_oxili_gx: no parameters
308[ 0.541141] gdsc_venus_core0: fast normal
309[ 0.541837] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
310[ 0.541848] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
311[ 0.542471] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
312[ 0.543478] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff80014a0000, with 1 ctx banks
313[ 0.544211] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001b80000, with 21 ctx banks
314[ 0.552097] msm_iommu_ctx 1f08000.qcom,iommu-ctx: context gfx3d_user using bank 0
315[ 0.552287] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
316[ 0.552465] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
317[ 0.552643] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
318[ 0.552823] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
319[ 0.553004] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
320[ 0.553181] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
321[ 0.553359] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
322[ 0.553567] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
323[ 0.553776] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
324[ 0.553990] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
325[ 0.554199] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
326[ 0.554411] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
327[ 0.554619] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
328[ 0.554830] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
329[ 0.555038] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
330[ 0.555252] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
331[ 0.555461] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
332[ 0.555667] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
333[ 0.555878] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
334[ 0.556090] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
335[ 0.556304] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
336[ 0.559469] Advanced Linux Sound Architecture Driver Initialized.
337[ 0.560268] aw87319_pa_init Enter
338[ 0.560788] Bluetooth: ffffffc07406fcf8
339[ 0.560818] NET: Registered protocol family 31
340[ 0.560823] Bluetooth: ffffffc07406fcf8
341[ 0.560832] Bluetooth: ffffffc07406fcd8Bluetooth: ffffffc07406fca8
342[ 0.560866] Bluetooth: ffffffc07406fcb8<6>[ 0.561234] cfg80211: Calling CRDA to update world regulatory domain
343[ 0.561255] cfg80211: World regulatory domain updated:
344[ 0.561260] cfg80211: DFS Master region: unset
345[ 0.561264] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
346[ 0.561271] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
347[ 0.561277] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
348[ 0.561283] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
349[ 0.561289] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
350[ 0.561295] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
351[ 0.561301] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
352[ 0.561307] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
353[ 0.561312] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
354[ 0.561330] NetLabel: Initializing
355[ 0.561335] NetLabel: domain hash size = 128
356[ 0.561339] NetLabel: protocols = UNLABELED CIPSOv4
357[ 0.561383] NetLabel: unlabeled traffic allowed by default
358[ 0.561537] pcie:pcie_init.
359[ 0.564172] Switched to clocksource arch_sys_counter
360[ 0.602085] AppArmor: AppArmor Filesystem Enabled
361[ 0.610805] NET: Registered protocol family 2
362[ 0.611340] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
363[ 0.611458] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
364[ 0.611673] TCP: Hash tables configured (established 16384 bind 16384)
365[ 0.611728] TCP: reno registered
366[ 0.611737] UDP hash table entries: 1024 (order: 3, 32768 bytes)
367[ 0.611775] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
368[ 0.611932] NET: Registered protocol family 1
369[ 0.611967] PCI: CLS 0 bytes, default 64
370[ 0.613107] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
371[ 0.614322] Trying to unpack rootfs image as initramfs...
372[ 0.764812] Freeing initrd memory: 4008K (ffffffc003600000 - ffffffc0039ea000)
373[ 0.769487] futex hash table entries: 1024 (order: 4, 65536 bytes)
374[ 0.769575] audit: initializing netlink subsys (disabled)
375[ 0.769620] audit: type=2000 audit(0.759:1): initialized
376[ 0.771525] vmscan: error setting kswapd cpu affinity mask
377[ 0.776070] zbud: loaded
378[ 0.776604] VFS: Disk quotas dquot_6.5.2
379[ 0.776728] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
380[ 0.778714] Registering sdcardfs 0.1
381[ 0.779270] Key type cifs.idmap registered
382[ 0.779394] fuse init (API version 7.23)
383[ 0.779701] msgmni has been set to 3664
384[ 0.781939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
385[ 0.781952] io scheduler noop registered
386[ 0.781961] io scheduler deadline registered
387[ 0.782067] io scheduler cfq registered (default)
388[ 0.786746] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
389[ 0.786760] mdss_mdp_probe+0x220/0x11ac->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
390[ 0.787359] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
391[ 0.788153] No change in context(0==0), skip
392[ 0.788616] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
393[ 0.788638] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
394[ 0.788644] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
395[ 0.788661] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
396[ 0.788678] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
397[ 0.788690] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
398[ 0.788795] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
399[ 0.789094] xlog_status: enable:1, panic:1, dump:2
400[ 0.789870] mdss_mdp_probe: mdss version = 0x100f0000, bootloader display is on, num 1, intf_sel=0x00000100
401[ 0.792843] mdss_smmu_util_parse_dt_clock: clocks are not defined
402[ 0.792906] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
403[ 0.792938] mdss_smmu_util_parse_dt_clock: clocks are not defined
404[ 0.792982] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
405[ 0.795070] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
406[ 0.795709] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_nt35521s_ebbg_720p_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_nt35521s_ebbg_720p_video
407[ 0.795748] mdss_dsi_panel_init: Panel Name = nt35521s_HD720p_video_EBBG_c3a
408[ 0.795918] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35521s_ebbg_720p_video" (ffffffc07406f2e8)
409[ 0.795939] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
410[ 0.795948] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
411[ 0.795953] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
412[ 0.796119] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-cabc-on-command
413[ 0.796129] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-cabc-off-command
414[ 0.796223] mdss_dsi_parse_panel_features: ulps feature disabled
415[ 0.796231] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
416[ 0.796240] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
417[ 0.796919] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
418[ 0.797314] mdss_dsi_parse_ctrl_params:3931 Unable to read qcom,display-id, data=0000000000000000,len=45
419[ 0.797329] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
420[ 0.797363] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff8000c5cb80 phy_regulator_size=30
421[ 0.797369] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000c58000 ctrl_size=300 phy_base=ffffff8000c5a400 phy_size=280
422[ 0.797481] dsi_panel_device_register: Continuous splash enabled
423[ 0.797769] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
424[ 0.798554] mdss_dsi_panel_reset: mdss_dsi_panel_reset time=0ms
425[ 0.819138] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
426[ 0.819586] mdss_dsi_status_init: DSI status check interval:2000
427[ 0.820266] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
428[ 0.821362] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
429[ 0.822146] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
430[ 0.822641] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
431[ 0.822814] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
432[ 0.822912] mdss_mdp_splash_parse_dt: splash mem child node is not present
433[ 0.826954] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
434[ 0.826988] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
435[ 0.831706] In memshare_probe, Memshare probe success
436[ 0.834415] msm_rpm_log_probe: OK
437[ 0.838404] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
438[ 0.840951] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
439[ 0.863030] brd: module loaded
440[ 0.865641] loop: module loaded
441[ 0.866028] zram: Created 1 device(s) ...
442[ 0.866622] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
443[ 0.866651] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
444[ 0.866660] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
445[ 0.866666] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
446[ 0.867423] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
447[ 0.870789] i2c-core: driver [tabla-i2c-core] using legacy suspend method
448[ 0.870797] i2c-core: driver [tabla-i2c-core] using legacy resume method
449[ 0.870900] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
450[ 0.870905] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
451[ 0.871005] i2c-core: driver [tasha-i2c-core] using legacy suspend method
452[ 0.871009] i2c-core: driver [tasha-i2c-core] using legacy resume method
453[ 0.871832] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
454[ 0.873029] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
455[ 0.873040] qce 720000.qcedev: CE device = 0x0
456[ 0.873040] , IO base, CE = 0xffffff80019c0000
457[ 0.873040] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
458[ 0.873040] IO base BAM = 0x (null)
459[ 0.873040] BAM IRQ 214
460[ 0.873040] Engines Availability = 0x2010853
461[ 0.873280] sps:BAM 0x0000000000704000 is registered.
462[ 0.873507] sps:BAM 0x0000000000704000 (va:0xffffff8001dc0000) enabled: ver:0x27, number of pipes:8
463[ 0.873765] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 214
464[ 0.876374] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
465[ 0.877080] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
466[ 0.877090] qcrypto 720000.qcrypto: CE device = 0x0
467[ 0.877090] , IO base, CE = 0xffffff8001e00000
468[ 0.877090] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
469[ 0.877090] IO base BAM = 0x (null)
470[ 0.877090] BAM IRQ 214
471[ 0.877090] Engines Availability = 0x2010853
472[ 0.877440] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 214
473[ 0.879066] qcrypto 720000.qcrypto: qcrypto-ecb-aes
474[ 0.879161] qcrypto 720000.qcrypto: qcrypto-cbc-aes
475[ 0.879253] qcrypto 720000.qcrypto: qcrypto-ctr-aes
476[ 0.879345] qcrypto 720000.qcrypto: qcrypto-ecb-des
477[ 0.879436] qcrypto 720000.qcrypto: qcrypto-cbc-des
478[ 0.879529] qcrypto 720000.qcrypto: qcrypto-ecb-3des
479[ 0.879623] qcrypto 720000.qcrypto: qcrypto-cbc-3des
480[ 0.879714] qcrypto 720000.qcrypto: qcrypto-xts-aes
481[ 0.879808] qcrypto 720000.qcrypto: qcrypto-sha1
482[ 0.879901] qcrypto 720000.qcrypto: qcrypto-sha256
483[ 0.879994] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
484[ 0.880115] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
485[ 0.880212] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
486[ 0.880313] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
487[ 0.880411] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
488[ 0.880508] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
489[ 0.880605] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
490[ 0.880707] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
491[ 0.880804] qcrypto 720000.qcrypto: qcrypto-aes-ccm
492[ 0.880907] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
493[ 0.882197] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
494[ 0.882414] ICE IRQ = 216
495[ 0.883772] SCSI Media Changer driver v0.25
496[ 0.885142] tun: Universal TUN/TAP device driver, 1.6
497[ 0.885147] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
498[ 0.888032] PPP generic driver version 2.4.2
499[ 0.888197] PPP BSD Compression module registered
500[ 0.888207] PPP Deflate Compression module registered
501[ 0.888227] PPP MPPE Compression module registered
502[ 0.888240] NET: Registered protocol family 24
503[ 0.889030] wcnss_wlan probed in built-in mode
504[ 0.890954] usbcore: registered new interface driver asix
505[ 0.891026] usbcore: registered new interface driver ax88179_178a
506[ 0.891072] usbcore: registered new interface driver cdc_ether
507[ 0.891118] usbcore: registered new interface driver net1080
508[ 0.891162] usbcore: registered new interface driver cdc_subset
509[ 0.891205] usbcore: registered new interface driver zaurus
510[ 0.891408] usbcore: registered new interface driver cdc_ncm
511[ 0.891879] msm_sharedmem: sharedmem_register_qmi: qmi init successful
512[ 0.892900] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
513[ 0.892907] hyp_assign_table: Failed to assign memory protection, ret = -5
514[ 0.892916] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f7100000 size=1572864 err=-5
515[ 0.893101] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
516[ 0.893809] msm_otg 78db000.usb: msm_otg probe
517[ 0.897555] msm_otg 78db000.usb: OTG regs = ffffff80014fc000
518[ 0.903721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
519[ 0.904127] ehci-pci: EHCI PCI platform driver
520[ 0.904180] ehci-msm: Qualcomm On-Chip EHCI Host Controller
521[ 0.904740] Unable to get vbus_otg
522[ 0.904748] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
523[ 0.904855] usbcore: registered new interface driver cdc_acm
524[ 0.904860] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
525[ 0.904924] usbcore: registered new interface driver usb-storage
526[ 0.904963] usbcore: registered new interface driver ums-alauda
527[ 0.905002] usbcore: registered new interface driver ums-cypress
528[ 0.905040] usbcore: registered new interface driver ums-datafab
529[ 0.905078] usbcore: registered new interface driver ums-freecom
530[ 0.905116] usbcore: registered new interface driver ums-isd200
531[ 0.905154] usbcore: registered new interface driver ums-jumpshot
532[ 0.905193] usbcore: registered new interface driver ums-karma
533[ 0.905233] usbcore: registered new interface driver ums-sddr09
534[ 0.905272] usbcore: registered new interface driver ums-sddr55
535[ 0.905312] usbcore: registered new interface driver ums-usbat
536[ 0.905419] usbcore: registered new interface driver usbserial
537[ 0.905465] usbcore: registered new interface driver usb_ehset_test
538[ 0.906238] gbridge_init: gbridge_init successs.
539[ 0.907257] mousedev: PS/2 mouse device common for all mice
540[ 0.907528] usbcore: registered new interface driver xpad
541[ 0.909339] input: ft5346 as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1
542[ 1.150312] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
543[ 1.150529] ft5x06_720p 3-0038: Device ID = 0x54
544[ 1.150850] ft5x06_720p 3-0038: report rate = 110Hz
545[ 1.151449] ft5x06_720p 3-0038: Firmware version = 16.0.0
546[ 1.151604] ft5x06_720p 3-0038: WT: fw vendor id = 81
547[ 1.550197] ft5x06_720p 3-0038: Lockdown info: 34 37 31 01 C3 01 34 00
548[ 1.550204] ft5x06_720p 3-0038: WT: TP_Maker = 0x34
549[ 1.550210] ft5x06_720p 3-0038: WT: LCD_Maker = 0x37
550[ 1.550215] ft5x06_720p 3-0038: WT: Panel_Ink = 0x31
551[ 1.550221] ft5x06_720p 3-0038: WT: Project_Id = 0xc3
552[ 1.550296] ft5x06_720p 3-0038: has no androidboot.mode
553[ 1.550302] ft5x06_720p 3-0038: upgrade
554[ 1.610482] FT5X06-TP-TAG INFO:Vendor ID:0x51, TP FW:0x10, IC TYPE:84
555[ 1.610640] ft5x06_720p 3-0038: Set hardwareinfo is: o-film, FT5435, FW:0x10, White
556[ 1.612070] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
557[ 1.612231] i2c /dev entries driver
558[ 1.618207] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
559[ 1.618880] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
560[ 1.618886] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
561[ 1.618900] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
562[ 1.618987] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
563[ 1.619322] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
564[ 1.620311] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
565[ 1.620317] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
566[ 1.620328] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
567[ 1.622973] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
568[ 1.626320] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
569[ 1.627669] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
570[ 1.630588] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
571[ 1.632013] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
572[ 1.633405] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
573[ 1.634766] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
574[ 1.634773] msm_actuator_platform_probe:1977 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
575[ 1.634933] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
576[ 1.635866] msm_eeprom_platform_probe qcom,eeprom-name ov13850, rc 0
577[ 1.635976] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
578[ 1.661749] msm_cci_init:1431: hw_version = 0x10020006
579[ 1.662223] msm_cci_irq:1783 MASTER_0 error 0x8000000
580[ 2.160064] msm_cci_wait: 301 wait for queue: 0
581[ 2.160071] msm_cci_transfer_end: 548 failed rc -110
582[ 2.160076] msm_cci_data_queue: 808 failed rc -110
583[ 2.160081] msm_camera_cci_i2c_write: line 135 rc = -110
584[ 2.180053] msm_cci_i2c_read:955 read_words = 0, exp words = 1
585[ 2.180058] msm_cci_i2c_read_bytes:1038 failed rc -22
586[ 2.180062] msm_camera_cci_i2c_read: line 47 rc = -22
587[ 2.180472] msm_cci_irq:1783 MASTER_0 error 0x10000000
588[ 2.680061] msm_cci_wait: 301 wait for queue: 0
589[ 2.680067] msm_cci_transfer_end: 548 failed rc -110
590[ 2.680072] msm_cci_data_queue: 808 failed rc -110
591[ 2.680077] msm_camera_cci_i2c_write: line 135 rc = -110
592[ 2.690039] eeprom_init_ov13850_reg_otp 46 E temp=0x0
593[ 2.690477] msm_cci_irq:1783 MASTER_0 error 0x8000000
594[ 3.190061] msm_cci_wait: 301 wait for queue: 0
595[ 3.190068] msm_cci_transfer_end: 548 failed rc -110
596[ 3.190072] msm_cci_data_queue: 808 failed rc -110
597[ 3.190077] msm_camera_cci_i2c_write: line 135 rc = -110
598[ 3.200471] msm_cci_irq:1783 MASTER_0 error 0x8000000
599[ 3.700061] msm_cci_wait: 301 wait for queue: 0
600[ 3.700067] msm_cci_transfer_end: 548 failed rc -110
601[ 3.700072] msm_cci_data_queue: 808 failed rc -110
602[ 3.700077] msm_camera_cci_i2c_write: line 135 rc = -110
603[ 3.710470] msm_cci_irq:1783 MASTER_0 error 0x8000000
604[ 4.210061] msm_cci_wait: 301 wait for queue: 0
605[ 4.210067] msm_cci_transfer_end: 548 failed rc -110
606[ 4.210072] msm_cci_data_queue: 808 failed rc -110
607[ 4.210077] msm_camera_cci_i2c_write: line 135 rc = -110
608[ 4.220471] msm_cci_irq:1783 MASTER_0 error 0x8000000
609[ 4.720061] msm_cci_wait: 301 wait for queue: 0
610[ 4.720067] msm_cci_transfer_end: 548 failed rc -110
611[ 4.720072] msm_cci_data_queue: 808 failed rc -110
612[ 4.720077] msm_camera_cci_i2c_write: line 135 rc = -110
613[ 4.730470] msm_cci_irq:1783 MASTER_0 error 0x8000000
614[ 5.230061] msm_cci_wait: 301 wait for queue: 0
615[ 5.230068] msm_cci_transfer_end: 548 failed rc -110
616[ 5.230073] msm_cci_data_queue: 808 failed rc -110
617[ 5.230077] msm_camera_cci_i2c_write: line 135 rc = -110
618[ 5.250038] i2c write faild
619[ 5.250056] msm_cci_i2c_read:955 read_words = 0, exp words = 4
620[ 5.250060] msm_cci_i2c_read_bytes:1038 failed rc -22
621[ 5.250067] read_eeprom_memory: read failed
622[ 5.250071] msm_eeprom_platform_probe read_eeprom_memory failed
623[ 5.274479] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@0 failed with error -22
624[ 5.274933] msm_eeprom_platform_probe qcom,eeprom-name s5k5e8_ofilm, rc 0
625[ 5.275077] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
626[ 5.317174] msm_cci_init:1431: hw_version = 0x10020006
627[ 5.317642] msm_cci_irq:1783 MASTER_0 error 0x8000000
628[ 5.810060] msm_cci_wait: 301 wait for queue: 0
629[ 5.810067] msm_cci_transfer_end: 548 failed rc -110
630[ 5.810071] msm_cci_data_queue: 808 failed rc -110
631[ 5.810076] msm_camera_cci_i2c_write: line 135 rc = -110
632[ 5.830039] read_eeprom_memory: page write failed
633[ 5.830044] msm_eeprom_platform_probe read_eeprom_memory failed
634[ 5.871493] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@2 failed with error -110
635[ 5.871891] msm_eeprom_platform_probe qcom,eeprom-name s5k3l2, rc 0
636[ 5.871999] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
637[ 5.897679] msm_cci_init:1431: hw_version = 0x10020006
638[ 5.898146] msm_cci_irq:1783 MASTER_0 error 0x10000000
639[ 5.898178] msm_cci_i2c_read:955 read_words = 0, exp words = 4
640[ 5.898183] msm_cci_i2c_read_bytes:1038 failed rc -22
641[ 5.898194] read_eeprom_memory: read failed
642[ 5.898198] msm_eeprom_platform_probe read_eeprom_memory failed
643[ 5.922561] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@4 failed with error -22
644[ 5.922954] msm_eeprom_platform_probe qcom,eeprom-name ov5675, rc 0
645[ 5.923091] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
646[ 5.965872] msm_cci_init:1431: hw_version = 0x10020006
647[ 5.966342] msm_cci_irq:1783 MASTER_0 error 0x8000000
648[ 6.460062] msm_cci_wait: 301 wait for queue: 0
649[ 6.460069] msm_cci_transfer_end: 548 failed rc -110
650[ 6.460073] msm_cci_data_queue: 808 failed rc -110
651[ 6.460078] msm_camera_cci_i2c_write: line 135 rc = -110
652[ 6.480039] read_eeprom_memory: page write failed
653[ 6.480044] msm_eeprom_platform_probe read_eeprom_memory failed
654[ 6.521491] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@5 failed with error -110
655[ 6.521900] msm_eeprom_platform_probe qcom,eeprom-name s5k5e8, rc 0
656[ 6.522050] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
657[ 6.564614] msm_cci_init:1431: hw_version = 0x10020006
658[ 6.565081] msm_cci_irq:1783 MASTER_0 error 0x8000000
659[ 7.060060] msm_cci_wait: 301 wait for queue: 0
660[ 7.060067] msm_cci_transfer_end: 548 failed rc -110
661[ 7.060072] msm_cci_data_queue: 808 failed rc -110
662[ 7.060077] msm_camera_cci_i2c_write: line 135 rc = -110
663[ 7.080039] read_eeprom_memory: page write failed
664[ 7.080044] msm_eeprom_platform_probe read_eeprom_memory failed
665[ 7.121489] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@6 failed with error -110
666[ 7.129559] MSM-CPP cpp_init_hardware:1008 CPP HW Version: 0x40030004
667[ 7.129572] MSM-CPP cpp_init_hardware:1026 stream_cnt:0
668[ 7.132467] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
669[ 7.132475] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
670[ 7.134360] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
671[ 7.134368] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
672[ 7.145638] __msm_jpeg_init:1537] Jpeg Device id 0
673[ 7.149713] unable to find DT imem DLOAD mode node
674[ 7.150292] unable to find DT imem EDLOAD mode node
675[ 7.152207] thermal thermal_zone0: failed to read out thermal zone 0
676[ 7.152433] thermal thermal_zone1: failed to read out thermal zone 1
677[ 7.152648] thermal thermal_zone2: failed to read out thermal zone 2
678[ 7.152865] thermal thermal_zone3: failed to read out thermal zone 3
679[ 7.173996] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
680[ 7.174102] device-mapper: req-crypt: dm-req-crypt successfully initalized.
681[ 7.174102]
682[ 7.175113] sdhci: Secure Digital Host Controller Interface driver
683[ 7.175118] sdhci: Copyright(c) Pierre Ossman
684[ 7.175127] sdhci-pltfm: SDHCI platform and OF driver helper
685[ 7.176044] qcom_ice_get_pdevice: found ice device ffffffc0740e8c00
686[ 7.176050] qcom_ice_get_pdevice: matching platform device ffffffc07243b800
687[ 7.179315] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001990000
688[ 7.179678] sdhci_msm 7824900.sdhci: No vmmc regulator found
689[ 7.179685] sdhci_msm 7824900.sdhci: No vqmmc regulator found
690[ 7.180091] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
691[ 7.209011] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
692[ 7.223844] sdhci_msm 7864900.sdhci: No vmmc regulator found
693[ 7.223853] sdhci_msm 7864900.sdhci: No vqmmc regulator found
694[ 7.224242] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
695[ 7.245168] mmc0: Out-of-interrupt timeout is 50[ms]
696[ 7.245174] mmc0: BKOPS_EN equals 0x2
697[ 7.245179] mmc0: eMMC FW version: 0x07
698[ 7.245184] mmc0: CMDQ supported: depth: 16
699[ 7.245188] mmc0: cache barrier support 0 flush policy 0
700[ 7.251821] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
701[ 7.252043] desc-base: 0xffffff80019bb000 trans-base: 0xffffff8002100000
702[ 7.252043] desc_dma 0xf6c5a000 trans_dma: 0xf7280000
703[ 7.252065] mmc0: CMDQ enabled on card
704[ 7.252076] mmc0: new HS400 MMC card at address 0001
705[ 7.252437] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=13 (0xffffffc071130580)
706[ 7.252558] mmcblk0: mmc0:0001 QE13MB 14.5 GiB
707[ 7.252676] mmcblk0rpmb: mmc0:0001 QE13MB partition 3 4.00 MiB
708[ 7.254413] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
709[ 7.254555] wingtech vib.max_timeout = 50000
710[ 7.255237] tz_log 8600720.tz-log: Hyp log service is not supported
711[ 7.256558] hidraw: raw HID events driver (C) Jiri Kosina
712[ 7.257059] usbcore: registered new interface driver usbhid
713[ 7.257064] usbhid: USB HID core driver
714[ 7.257466] ashmem: initialized
715[ 7.258046] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
716[ 7.262906] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
717[ 7.266329] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
718[ 7.266524] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
719[ 7.269517] usbcore: registered new interface driver snd-usb-audio
720[ 7.289263] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
721[ 7.296783] u32 classifier
722[ 7.296791] Actions configured
723[ 7.296832] Netfilter messages via NETLINK v0.30.
724[ 7.296847] nfnl_acct: registering with nfnetlink.
725[ 7.296893] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
726[ 7.297248] ctnetlink v0.93: registering with nfnetlink.
727[ 7.297988] xt_time: kernel timezone is -0000
728[ 7.298256] ip_tables: (C) 2000-2006 Netfilter Core Team
729[ 7.298411] arp_tables: (C) 2002 David S. Miller
730[ 7.298455] TCP: cubic registered
731[ 7.298464] Initializing XFRM netlink socket
732[ 7.298911] NET: Registered protocol family 10
733[ 7.299840] mip6: Mobile IPv6
734[ 7.299869] ip6_tables: (C) 2000-2006 Netfilter Core Team
735[ 7.300252] sit: IPv6 over IPv4 tunneling driver
736[ 7.300706] NET: Registered protocol family 17
737[ 7.300744] NET: Registered protocol family 15
738[ 7.300784] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
739[ 7.300796] Ebtables v2.0 registered
740[ 7.300949] Bluetooth: ffffffc07406fcb8
741[ 7.300962] Bluetooth: ffffffc07406fca8Bluetooth: ffffffc07406fce8
742[ 7.300999] Bluetooth: ffffffc07406fcc8Bluetooth: ffffffc07406fcc8
743[ 7.301012] Bluetooth: ffffffc07406fca8Bluetooth: ffffffc07406fd18
744[ 7.301029] Bluetooth: ffffffc07406fcf8<6>[ 7.301061] l2tp_core: L2TP core driver, V2.0
745[ 7.301079] l2tp_ppp: PPPoL2TP kernel driver, V2.0
746[ 7.301088] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
747[ 7.301109] l2tp_netlink: L2TP netlink interface
748[ 7.301139] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
749[ 7.301161] l2tp_debugfs: L2TP debugfs support
750[ 7.301170] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
751[ 7.301208] Key type dns_resolver registered
752[ 7.302049] NET: Registered protocol family 27
753[ 7.308524] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
754[ 7.310292] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
755[ 7.311055] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
756[ 7.311419] Unable to get vbus_otg
757[ 7.311427] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
758[ 7.311942] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1b (ok)
759[ 7.312913] SMB358 smb358_get_prop_batt_health: battery health is 1
760[ 7.314196] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32203, 35
761[ 7.316995] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32203, 35
762[ 7.317030] battery powe supply creat attr file!!
763[ 7.323103] smb358_otg_vreg: no parameters
764[ 7.323327] SMB358 smb358_get_prop_batt_health: battery health is 1
765[ 7.324544] of_batterydata_get_best_profile: C3N batt_id = 29
766[ 7.324557] of_batterydata_get_best_profile: wingtech-feimaotui-4v4-3030mah found
767[ 7.324566] smb358-charger 5-0057: found battery type is wingtech-feimaotui-4v4-3030mah
768[ 7.325807] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32201, 35
769[ 7.329614] SMB358 chg_uv: chg_uv pluginupdating usb_psy present=1
770[ 7.329906] qpnp_adc_tm_channel_measure: not a valid ADC_TM channel
771[ 7.329912] SMB358 smb358_charger_probe: requesting ADC error -22
772[ 7.335824] smb358-charger 5-0057: SMB358 successfully probed. charger=1, batt=1
773[ 7.338081] SMB358 get_capacity_disable_charging: else discharg
774[ 7.338115] SMB358 into_fastmmi_mode: has no androidboot.mode
775[ 7.338628] msm_otg 78db000.usb: phy_reset: success
776[ 7.340121] Registered cp15_barrier emulation handler
777[ 7.340133] Registered setend emulation handler
778[ 7.340210] Creating CPU group 0
779[ 7.340215] Init CPU0 state
780[ 7.340219] Init CPU1 state
781[ 7.340223] Init CPU2 state
782[ 7.340227] Init CPU3 state
783[ 7.349193] Key type encrypted registered
784[ 7.349219] AppArmor: AppArmor sha1 policy hashing enabled
785[ 7.349228] evm: HMAC attrs: 0x1
786[ 7.441305] IPA HW is not supported on this target
787[ 7.471369] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
788[ 7.474445] RNDIS_IPA module is loaded.
789[ 7.475255] file system registered
790[ 7.475320] mbim_init: initialize 1 instances
791[ 7.475462] mbim_init: Initialized 1 ports
792[ 7.477371] rndis_qc_init: initialize rndis QC instance
793[ 7.477665] Number of LUNs=8
794[ 7.477674] Mass Storage Function, version: 2009/09/11
795[ 7.477682] LUN: removable file: (no medium)
796[ 7.477699] Number of LUNs=1
797[ 7.477756] LUN: removable file: (no medium)
798[ 7.477761] Number of LUNs=1
799[ 7.478100] android_usb gadget: android_usb ready
800[ 7.478109] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
801[ 7.478126] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
802[ 7.479850] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
803[ 7.480436] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
804[ 7.480441] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 00:17:01 UTC (1021)
805[ 7.482324] /soc/i2c@7af5000/cw2015@62: could not get #gpio-cells for /soc/pinctrl@1000000/pmx_qdsd_data2/data2_trace
806[ 7.483041] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32200, 35
807[ 7.483048] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 3 , enabled_delay_times = 3
808[ 7.483055] SMB358 qpnp_lbc_temp_alarm_work_fn: battery is normal
809[ 7.495000] SMB358 smb358_get_prop_batt_health: battery health is 1
810[ 7.496273] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32200, 35
811[ 7.570166] msm_otg 78db000.usb: Avail curr from USB = 500
812[ 7.571475] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
813[ 7.571490] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
814[ 7.820058] cw201x 5-0062: cw_bat_gpio_configure irq gpio not provided
815[ 7.820066] ------------[ cut here ]------------
816[ 7.820079] WARNING: CPU: 2 PID: 1 at /home/darkness/Documents/halium/kernel/xiaomi/msm8917/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
817[ 7.820083] invalid GPIO -22
818[ 7.820087] Modules linked in:
819[ 7.820096] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.31-TeamGhost-gdf100350-dirty #1
820[ 7.820101] Hardware name: Qualcomm Technologies, Inc. MSM8917-PMI8937 QRD SKU5 (DT)
821[ 7.820105] Call trace:
822[ 7.820114] [<ffffffc000089b08>] dump_backtrace+0x0/0x23c
823[ 7.820121] [<ffffffc000089d58>] show_stack+0x14/0x1c
824[ 7.820129] [<ffffffc000d0ef54>] dump_stack+0x80/0xa4
825[ 7.820137] [<ffffffc0000a2e88>] warn_slowpath_common+0x8c/0xb0
826[ 7.820144] [<ffffffc0000a2f0c>] warn_slowpath_fmt+0x60/0x80
827[ 7.820150] [<ffffffc0003c2910>] gpio_to_desc+0x2c/0x50
828[ 7.820158] [<ffffffc000893ae8>] cw_bat_probe+0x730/0x8b4
829[ 7.820167] [<ffffffc0007a688c>] i2c_device_probe+0xb8/0xec
830[ 7.820174] [<ffffffc0005b2cac>] driver_probe_device+0xd8/0x224
831[ 7.820180] [<ffffffc0005b2ea8>] __driver_attach+0x64/0x90
832[ 7.820186] [<ffffffc0005b1da8>] bus_for_each_dev+0x80/0xb0
833[ 7.820192] [<ffffffc0005b2774>] driver_attach+0x20/0x28
834[ 7.820198] [<ffffffc0005b2414>] bus_add_driver+0xfc/0x1cc
835[ 7.820204] [<ffffffc0005b385c>] driver_register+0x94/0xe0
836[ 7.820211] [<ffffffc0007a5d58>] i2c_register_driver+0x4c/0xac
837[ 7.820219] [<ffffffc00143b464>] cw_bat_init+0x18/0x20
838[ 7.820226] [<ffffffc000082b24>] do_one_initcall+0x18c/0x1a8
839[ 7.820234] [<ffffffc0013fab90>] kernel_init_freeable+0x1d0/0x284
840[ 7.820241] [<ffffffc000d08450>] kernel_init+0x14/0xd8
841[ 7.820246] ---[ end trace 851328c86e93ae3c ]---
842[ 7.820255] cw201x 5-0062: request irq failed
843[ 7.820259] ------------[ cut here ]------------
844[ 7.820266] WARNING: CPU: 2 PID: 1 at /home/darkness/Documents/halium/kernel/xiaomi/msm8917/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
845[ 7.820270] invalid GPIO -22
846[ 7.820274] Modules linked in:
847[ 7.820281] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-TeamGhost-gdf100350-dirty #1
848[ 7.820286] Hardware name: Qualcomm Technologies, Inc. MSM8917-PMI8937 QRD SKU5 (DT)
849[ 7.820289] Call trace:
850[ 7.820296] [<ffffffc000089b08>] dump_backtrace+0x0/0x23c
851[ 7.820302] [<ffffffc000089d58>] show_stack+0x14/0x1c
852[ 7.820308] [<ffffffc000d0ef54>] dump_stack+0x80/0xa4
853[ 7.820315] [<ffffffc0000a2e88>] warn_slowpath_common+0x8c/0xb0
854[ 7.820322] [<ffffffc0000a2f0c>] warn_slowpath_fmt+0x60/0x80
855[ 7.820328] [<ffffffc0003c2910>] gpio_to_desc+0x2c/0x50
856[ 7.820335] [<ffffffc0003c4a5c>] gpio_free+0xc/0x18
857[ 7.820341] [<ffffffc000893b30>] cw_bat_probe+0x778/0x8b4
858[ 7.820348] [<ffffffc0007a688c>] i2c_device_probe+0xb8/0xec
859[ 7.820354] [<ffffffc0005b2cac>] driver_probe_device+0xd8/0x224
860[ 7.820360] [<ffffffc0005b2ea8>] __driver_attach+0x64/0x90
861[ 7.820365] [<ffffffc0005b1da8>] bus_for_each_dev+0x80/0xb0
862[ 7.820371] [<ffffffc0005b2774>] driver_attach+0x20/0x28
863[ 7.820376] [<ffffffc0005b2414>] bus_add_driver+0xfc/0x1cc
864[ 7.820382] [<ffffffc0005b385c>] driver_register+0x94/0xe0
865[ 7.820389] [<ffffffc0007a5d58>] i2c_register_driver+0x4c/0xac
866[ 7.820395] [<ffffffc00143b464>] cw_bat_init+0x18/0x20
867[ 7.820401] [<ffffffc000082b24>] do_one_initcall+0x18c/0x1a8
868[ 7.820408] [<ffffffc0013fab90>] kernel_init_freeable+0x1d0/0x284
869[ 7.820414] [<ffffffc000d08450>] kernel_init+0x14/0xd8
870[ 7.820418] ---[ end trace 851328c86e93ae3d ]---
871[ 7.932442] parse_cpu_levels: idx 1 594
872[ 7.936078] led_gpio_flash_probe seq_name[0] = flash_en
873[ 7.936087] led_gpio_flash_probe:232 seq_type[0] 0
874[ 7.936093] led_gpio_flash_probe seq_name[1] = flash_now
875[ 7.936098] led_gpio_flash_probe:250 seq_type[1] 1
876[ 7.936197] led_gpio_flash_probe:probe successfully!
877[ 7.943116] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
878[ 7.949776] msm8952-asoc-wcd c051000.sound: default codec configured
879[ 7.953954] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
880[ 7.953989] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
881[ 7.955590] mem_acc_corner: disabling
882[ 7.955608] clock_late_init: Removing enables held for handed-off clocks
883[ 7.957987] ALSA device list:
884[ 7.957992] No soundcards found.
885[ 7.958076] Warning: unable to open an initial console.
886[ 7.958304] Freeing unused kernel memory: 508K (ffffffc0013fa000 - ffffffc001479000)
887[ 7.958340] Freeing alternatives memory: 84K (ffffffc001479000 - ffffffc00148e000)
888[ 7.986543] systemd-udevd[332]: starting version 232
889[ 7.988053] random: systemd-udevd urandom read with 98 bits of entropy available
890[ 8.212159] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
891[ 8.212170] SMB358 smb358_get_prop_batt_health: battery health is 1
892[ 8.213464] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32203, 35
893[ 8.213473] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
894[ 8.304383] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
895[ 8.304395] SMB358 smb358_get_prop_batt_health: battery health is 1
896[ 8.305704] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32194, 35
897[ 8.305719] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
898[ 8.514327] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
899[ 8.514340] SMB358 smb358_get_prop_batt_health: battery health is 1
900[ 8.515656] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32190, 35
901[ 8.515669] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
902[ 8.707265] Begin: Running /scripts/nfs-top ... done.
903[ 8.707492] Begin: Running /scripts/nfs-premount ... done.
904[ 8.707714] Begin: Running /scripts/local-top ... done.
905[ 8.707886] Begin: Running /scripts/local-premount ... done.
906[ 8.726547] initrd: checking filesystem integrity for the userdata partition
907[ 8.729003] EXT3-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
908[ 8.729600] EXT2-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
909[ 8.738401] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: errors=remount-ro
910[ 8.760880] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
911[ 8.766762] dumpe2fs 1.43.4 (31-Jan-2017)
912[ 8.771214] initrd: mounting /dev/mmcblk0p49
913[ 8.797454] EXT3-fs (mmcblk0p49): error: unrecognized mount option "discard" or missing value
914[ 8.798477] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
915[ 8.802541] EXT4-fs (mmcblk0p49): mounted filesystem with journalled data mode. Opts: discard,data=journal
916[ 8.806444] initrd: boot mode: halium
917[ 8.807024] initrd: Halium rootfs is /tmpmnt/rootfs.img
918[ 8.807631] initrd: mounting system rootfs at /halium-system
919[ 8.810021] EXT3-fs (loop0): error: couldn't mount because of unsupported optional features (240)
920[ 8.810480] EXT2-fs (loop0): error: couldn't mount because of unsupported optional features (240)
921[ 8.819571] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
922[ 8.829911] initrd: mounting /tmpmnt/rootfs.img (user mode)
923[ 8.838024] EXT4-fs (loop0): re-mounted. Opts: data=ordered
924[ 8.838864] initrd: mounting android system image (/tmpmnt/system.img) ro, in /android-system (system mode)
925[ 8.838930] initrd: mounting android system image from userdata partition
926[ 8.841079] EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (40)
927[ 8.841481] EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (40)
928[ 8.846550] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
929[ 8.846986] initrd: extracting android ramdisk
930[ 9.017766] 8163 blocks
931[ 9.018871] initrd: Normal boot
932[ 9.039659] initrd: device is rolex
933[ 9.043179] initrd: Adding bind-mounts to /root/etc/fstab
934[ 9.170544] random: nonblocking pool is initialized
935[ 9.577170] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
936[ 9.598671] initrd: checking mount label boot
937[ 9.599401] initrd: mounting /dev/disk/by-partlabel/boot as /root/android//boot
938[ 9.602527] mount: mounting /dev/disk/by-partlabel/boot on /root/android//boot failed: No such device
939[ 9.607955] initrd: checking mount label recovery
940[ 9.608673] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
941[ 9.611669] mount: mounting /dev/disk/by-partlabel/recovery on /root/android//recovery failed: No such device
942[ 9.624907] initrd: checking mount label cache
943[ 9.625622] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
944[ 9.628329] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
945[ 9.633927] initrd: checking mount label persist
946[ 9.634641] initrd: mounting /dev/disk/by-partlabel/persist as /root/android//persist
947[ 9.639999] EXT4-fs (mmcblk0p26): warning: maximal mount count reached, running e2fsck is recommended
948[ 9.640388] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
949[ 9.645876] initrd: checking mount label dsp
950[ 9.646588] initrd: mounting /dev/disk/by-partlabel/dsp as /root/android//dsp
951[ 9.651522] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
952[ 9.657077] initrd: checking mount label modem
953[ 9.657786] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//firmware
954[ 9.673080] initrd: checking mount label mmc_host*
955[ 9.678650] initrd: checking mount label msm_hsusb_host*
956[ 9.679942] initrd: moving Android system to /android/system
957[ 9.686989] mount: mounting /root/android/system/lib/modules on /root/lib/modules failed: No such file or directory
958[ 9.688382] Begin: Running /scripts/local-bottom ... done.
959[ 9.688572] done.
960[ 9.694793] Begin: Running /scripts/nfs-bottom ... done.
961[ 9.695104] Begin: Running /scripts/init-bottom ... done.
962[ 9.735865] run-init: opening console: No such device
963[ 9.736007] Target filesystem doesn't have requested /sbin/init.
964[ 9.736739] run-init: opening console: No such device
965[ 9.737550] run-init: opening console: No such device
966[ 9.738365] run-init: opening console: No such device
967[ 9.739166] run-init: opening console: No such device
968[ 9.740067] run-init: opening console: No such device
969[ 9.741394] No init found. Try passing init= bootarg.
970[ 9.744547] enable_store: android_usb: already disabled
971[ 9.744719] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
972[ 9.854353] msm_otg 78db000.usb: Avail curr from USB = 100
973[ 9.854781] android_work: android_work: did not send uevent (0 0 0000000000000000)
974[ 9.861191] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
975[ 9.980825] composite_setup:config is not active. send stall
976[ 9.980889] android_work: android_work: sent uevent USB_STATE=CONNECTED
977[ 9.981265] composite_setup:config is not active. send stall
978[ 9.981640] composite_setup:config is not active. send stall
979[ 9.985348] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
980[ 9.991381] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
981[ 10.216816] composite_setup:config is not active. send stall
982[ 10.216869] android_work: android_work: sent uevent USB_STATE=CONNECTED
983[ 10.217261] composite_setup:config is not active. send stall
984[ 10.217635] composite_setup:config is not active. send stall
985[ 10.221348] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
986[ 10.227539] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
987[ 10.246010] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
988[ 10.246054] android_usb gadget: using random self ethernet address
989[ 10.246070] android_usb gadget: using random host ethernet address
990[ 10.246569] rndis0: MAC 86:c4:1d:4e:de:8f
991[ 10.246575] rndis0: HOST MAC 2a:39:ac:70:8e:da
992[ 10.280063] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
993[ 10.281176] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
994[ 10.281732] android_work: android_work: did not send uevent (0 0 0000000000000000)
995[ 10.283424] ########################## starting dhcpd
996[ 10.284692] ########################## starting telnetd
997[ 10.285998] ########################## usb_info: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
998[ 10.287439] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
999[ 10.456334] android_work: android_work: did not send uevent (0 0 0000000000000000)
1000[ 10.461977] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
1001[ 10.584916] android_work: android_work: sent uevent USB_STATE=CONNECTED
1002[ 10.588582] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1003[ 10.594716] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
1004[ 10.740876] android_work: android_work: sent uevent USB_STATE=CONNECTED
1005[ 10.741970] android_usb gadget: high-speed config #1: 86000c8.android_usb
1006[ 10.742113] msm_otg 78db000.usb: Avail curr from USB = 500
1007[ 10.742181] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1008[ 10.748703] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
1009[ 10.800052] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1010[ 11.288204] ps: invalid option -- 'w'
1011[ 11.294045] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1012[ 11.294061]
1013[ 11.294061] Usage: ps [-o COL1,COL2=HEADER] [-T]
1014[ 11.294061]
1015[ 11.294061] Show list of processes
1016[ 11.294061]
1017[ 11.294061] -o COL1,COL2=HEADER Select columns for display
1018[ 11.294061] -T Show threads
1019[ 11.294061]
1020[ 11.318617] netstat: invalid option -- 'p'
1021[ 11.324391] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1022[ 11.324409]
1023[ 11.324409] Usage: netstat [-ral] [-tuwx] [-en]
1024[ 11.324409]
1025[ 11.324409] Display networking information
1026[ 11.324409]
1027[ 11.324409] -r Routing table
1028[ 11.324409] -a All sockets
1029[ 11.324409] -l Listening sockets
1030[ 11.324409] Else: connected sockets
1031[ 11.324409] -t TCP sockets
1032[ 11.324409] -u UDP sockets
1033[ 11.324409] -w Raw sockets
1034[ 11.324409] -x Unix sockets
1035[ 11.324409] Else: all socket types
1036[ 11.324409] -e Other/more information
1037[ 11.324409] -n Don't resolve names
1038[ 11.324409]
1039[ 11.325345] cat: write error: Invalid argument
1040[ 11.474218] rndis_command_complete: rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
1041[ 11.701990] ########################## Beginning inject loop
1042[ 17.494135] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1043[ 17.495710] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32193, 35
1044[ 17.495718] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1045[ 17.500230] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3990000
1046[ 27.495731] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1047[ 27.497335] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32189, 35
1048[ 27.497342] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1049[ 27.501802] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3997000
1050[ 37.497355] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1051[ 37.498886] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32190, 35
1052[ 37.498893] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1053[ 37.503584] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3998000
1054[ 47.498908] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1055[ 47.500494] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32191, 35
1056[ 47.500502] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1057[ 47.505041] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3998000
1058[ 57.500515] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1059[ 57.502082] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32190, 35
1060[ 57.502089] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1061[ 57.507254] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3999000
1062[ 67.502102] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1063[ 67.503653] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32193, 35
1064[ 67.503660] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1065[ 67.508695] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3997000
1066[ 77.503675] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1067[ 77.505337] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32193, 35
1068[ 77.505345] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1069[ 77.510385] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3996000
1070[ 87.505359] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1071[ 87.506970] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32195, 35
1072[ 87.506978] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1073[ 87.512058] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3996000
1074[ 97.506990] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1075[ 97.508577] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32194, 35
1076[ 97.508584] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1077[ 97.513667] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3997000
1078[ 107.157748] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1079[ 107.157760] SMB358 smb358_get_prop_batt_health: battery health is 1
1080[ 107.159054] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32198, 35
1081[ 107.159064] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3996000
1082[ 107.246179] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1083[ 107.246190] SMB358 smb358_get_prop_batt_health: battery health is 1
1084[ 107.247483] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32197, 35
1085[ 107.247493] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3996000
1086[ 107.450091] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1087[ 107.450124] SMB358 smb358_get_prop_batt_health: battery health is 1
1088[ 107.451456] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32187, 35
1089[ 107.451776] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3996000
1090[ 107.508603] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1091[ 107.510647] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32198, 35
1092[ 107.510656] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1093[ 107.515129] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3996000
1094[ 107.817416] Begin: Running /scripts/nfs-top ... done.
1095[ 107.817645] Begin: Running /scripts/nfs-premount ... done.
1096[ 107.817888] Begin: Running /scripts/local-top ... done.
1097[ 107.818075] Begin: Running /scripts/local-premount ... done.
1098[ 107.892428] initrd: PANIC for reason: Couldn't find data partition.
1099[ 107.893614] Couldn't find data partition.
1100[ 107.895553] mkdir: can't create directory '/config': File exists
1101[ 107.896691] mount: mounting none on /config failed: Device or resource busy
1102[ 107.907898] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1103[ 107.950225] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1104[ 107.950476] rndis_function_bind_config: rndis_function_bind_config MAC: 2A:39:AC:70:8E:DA
1105[ 107.950520] android_usb gadget: using random self ethernet address
1106[ 107.950526] android_usb gadget: using previous host ethernet address
1107[ 107.951033] rndis0: MAC 7a:40:00:4a:61:95
1108[ 107.951039] rndis0: HOST MAC 2a:39:ac:70:8e:da
1109[ 107.951109] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1110[ 107.954178] msm_otg 78db000.usb: Avail curr from USB = 2
1111[ 107.954197] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1112[ 107.954221] android_work: android_work: did not send uevent (1 1 0000000000000000)
1113[ 107.959865] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1114[ 107.967762] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1115[ 108.108617] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1116[ 108.108647] msm_otg 78db000.usb: Avail curr from USB = 100
1117[ 108.108746] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1118[ 108.114664] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1119[ 108.122566] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1120[ 108.209601] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1121[ 108.209613] SMB358 smb358_get_prop_batt_health: battery health is 1
1122[ 108.210905] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32197, 35
1123[ 108.210914] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1124[ 108.214138] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1125[ 108.214150] SMB358 smb358_get_prop_batt_health: battery health is 1
1126[ 108.215441] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32198, 35
1127[ 108.215450] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1128[ 108.235224] android_work: android_work: sent uevent USB_STATE=CONNECTED
1129[ 108.238956] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1130[ 108.244500] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1131[ 108.391202] android_work: android_work: sent uevent USB_STATE=CONNECTED
1132[ 108.392294] android_usb gadget: high-speed config #1: 86000c8.android_usb
1133[ 108.392361] msm_otg 78db000.usb: Avail curr from USB = 500
1134[ 108.392760] rndis_command_complete: rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
1135[ 108.398767] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1136[ 108.450094] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1137[ 108.452146] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1138[ 108.490118] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1139[ 108.490735] rndis_function_bind_config: rndis_function_bind_config MAC: 2A:39:AC:70:8E:DA
1140[ 108.490777] android_usb gadget: using random self ethernet address
1141[ 108.490783] android_usb gadget: using previous host ethernet address
1142[ 108.491310] rndis0: MAC 92:28:f5:f2:cb:9a
1143[ 108.491316] rndis0: HOST MAC 2a:39:ac:70:8e:da
1144[ 108.491388] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1145[ 108.492641] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1146[ 108.494456] msm_otg 78db000.usb: Avail curr from USB = 2
1147[ 108.494475] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1148[ 108.494500] android_work: android_work: did not send uevent (1 1 0000000000000000)
1149[ 108.495016] ########################## starting dhcpd
1150[ 108.496168] ########################## starting telnetd
1151[ 108.497386] ########################## usb_info: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
1152[ 108.500320] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1153[ 108.508198] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1154[ 108.656836] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1155[ 108.656866] msm_otg 78db000.usb: Avail curr from USB = 100
1156[ 108.656961] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1157[ 108.662878] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1158[ 108.670736] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1159[ 108.783216] android_work: android_work: sent uevent USB_STATE=CONNECTED
1160[ 108.786946] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1161[ 108.792594] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1162[ 108.939247] android_work: android_work: sent uevent USB_STATE=CONNECTED
1163[ 108.940161] android_usb gadget: high-speed config #1: 86000c8.android_usb
1164[ 108.940308] msm_otg 78db000.usb: Avail curr from USB = 500
1165[ 108.940380] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1166[ 108.940637] rndis_command_complete: rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
1167[ 108.946885] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1168[ 109.000176] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1169[ 109.500212] ps: invalid option -- 'w'
1170[ 109.505955] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1171[ 109.505969]
1172[ 109.505969] Usage: ps [-o COL1,COL2=HEADER] [-T]
1173[ 109.505969]
1174[ 109.505969] Show list of processes
1175[ 109.505969]
1176[ 109.505969] -o COL1,COL2=HEADER Select columns for display
1177[ 109.505969] -T Show threads
1178[ 109.505969]
1179[ 109.526683] netstat: invalid option -- 'p'
1180[ 109.532461] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1181[ 109.532476]
1182[ 109.532476] Usage: netstat [-ral] [-tuwx] [-en]
1183[ 109.532476]
1184[ 109.532476] Display networking information
1185[ 109.532476]
1186[ 109.532476] -r Routing table
1187[ 109.532476] -a All sockets
1188[ 109.532476] -l Listening sockets
1189[ 109.532476] Else: connected sockets
1190[ 109.532476] -t TCP sockets
1191[ 109.532476] -u UDP sockets
1192[ 109.532476] -w Raw sockets
1193[ 109.532476] -x Unix sockets
1194[ 109.532476] Else: all socket types
1195[ 109.532476] -e Other/more information
1196[ 109.532476] -n Don't resolve names
1197[ 109.532476]
1198[ 109.533410] cat: write error: Invalid argument
1199[ 109.537053] mkdir: can't create directory '/init-ctl': File exists
1200[ 109.537541] mkfifo: /init-ctl/stdin: File exists
1201[ 109.537758] ########################## Beginning inject loop
1202[ 117.510671] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1203[ 117.512268] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32194, 35
1204[ 117.512275] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1205[ 117.516969] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3924000
1206[ 118.739324] /scripts/panic/telnet: line 158: can't open /init-ctl/stdin: Interrupted system call
1207[ 119.905520] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1208[ 119.905532] SMB358 smb358_get_prop_batt_health: battery health is 1
1209[ 119.906825] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32197, 35
1210[ 119.906834] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1211[ 119.994746] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1212[ 119.994758] SMB358 smb358_get_prop_batt_health: battery health is 1
1213[ 119.996052] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32196, 35
1214[ 119.996062] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1215[ 120.446872] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1216[ 120.446884] SMB358 smb358_get_prop_batt_health: battery health is 1
1217[ 120.448319] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32184, 35
1218[ 120.448335] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1219[ 120.502445] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:67
1220[ 120.502457] SMB358 smb358_get_prop_batt_health: battery health is 1
1221[ 120.504028] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32186, 35
1222[ 120.504044] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1223[ 120.688262] Begin: Running /scripts/nfs-top ... done.
1224[ 120.688480] Begin: Running /scripts/nfs-premount ... done.
1225[ 120.688719] Begin: Running /scripts/local-top ... done.
1226[ 120.688906] Begin: Running /scripts/local-premount ... done.
1227[ 120.706060] initrd: PANIC for reason: Couldn't find data partition.
1228[ 120.707184] Couldn't find data partition.
1229[ 120.709127] mkdir: can't create directory '/config': File exists
1230[ 120.710305] mount: mounting none on /config failed: Device or resource busy
1231[ 120.721539] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1232[ 120.780218] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1233[ 120.780482] rndis_function_bind_config: rndis_function_bind_config MAC: 2A:39:AC:70:8E:DA
1234[ 120.780525] android_usb gadget: using random self ethernet address
1235[ 120.780531] android_usb gadget: using previous host ethernet address
1236[ 120.781082] rndis0: MAC 8a:3a:6a:9d:ec:47
1237[ 120.781089] rndis0: HOST MAC 2a:39:ac:70:8e:da
1238[ 120.781161] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1239[ 120.784222] msm_otg 78db000.usb: Avail curr from USB = 2
1240[ 120.784237] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1241[ 120.784263] android_work: android_work: did not send uevent (1 1 0000000000000000)
1242[ 120.789976] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1243[ 120.797858] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1244[ 120.948397] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1245[ 120.948427] msm_otg 78db000.usb: Avail curr from USB = 100
1246[ 120.948538] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1247[ 120.954442] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1248[ 120.962236] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1249[ 121.075018] android_work: android_work: sent uevent USB_STATE=CONNECTED
1250[ 121.078651] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1251[ 121.084413] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1252[ 121.231038] android_work: android_work: sent uevent USB_STATE=CONNECTED
1253[ 121.231963] android_usb gadget: high-speed config #1: 86000c8.android_usb
1254[ 121.232039] msm_otg 78db000.usb: Avail curr from USB = 500
1255[ 121.232567] rndis_command_complete: rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
1256[ 121.238451] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1257[ 121.282203] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1258[ 121.290112] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1259[ 121.310181] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1260[ 121.310793] rndis_function_bind_config: rndis_function_bind_config MAC: 2A:39:AC:70:8E:DA
1261[ 121.310829] android_usb gadget: using random self ethernet address
1262[ 121.310835] android_usb gadget: using previous host ethernet address
1263[ 121.311343] rndis0: MAC 46:69:59:01:d4:e1
1264[ 121.311349] rndis0: HOST MAC 2a:39:ac:70:8e:da
1265[ 121.330065] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1266[ 121.331207] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1267[ 121.333128] msm_otg 78db000.usb: Avail curr from USB = 2
1268[ 121.333146] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1269[ 121.333502] ########################## starting dhcpd
1270[ 121.333647] android_work: android_work: did not send uevent (1 1 0000000000000000)
1271[ 121.334558] ########################## starting telnetd
1272[ 121.335626] ########################## usb_info: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
1273[ 121.339300] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1274[ 121.347127] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1275[ 121.476716] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1276[ 121.476749] msm_otg 78db000.usb: Avail curr from USB = 100
1277[ 121.476862] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1278[ 121.482875] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1279[ 121.490778] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1280[ 121.603008] android_work: android_work: sent uevent USB_STATE=CONNECTED
1281[ 121.606645] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1282[ 121.612346] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1283[ 121.763041] android_work: android_work: sent uevent USB_STATE=CONNECTED
1284[ 121.763943] android_usb gadget: high-speed config #1: 86000c8.android_usb
1285[ 121.764098] msm_otg 78db000.usb: Avail curr from USB = 500
1286[ 121.764171] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1287[ 121.764414] rndis_command_complete: rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
1288[ 121.770712] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1289[ 121.820104] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1290[ 122.338338] ps: invalid option -- 'w'
1291[ 122.344165] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1292[ 122.344182]
1293[ 122.344182] Usage: ps [-o COL1,COL2=HEADER] [-T]
1294[ 122.344182]
1295[ 122.344182] Show list of processes
1296[ 122.344182]
1297[ 122.344182] -o COL1,COL2=HEADER Select columns for display
1298[ 122.344182] -T Show threads
1299[ 122.344182]
1300[ 122.364989] netstat: invalid option -- 'p'
1301[ 122.370753] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1302[ 122.370770]
1303[ 122.370770] Usage: netstat [-ral] [-tuwx] [-en]
1304[ 122.370770]
1305[ 122.370770] Display networking information
1306[ 122.370770]
1307[ 122.370770] -r Routing table
1308[ 122.370770] -a All sockets
1309[ 122.370770] -l Listening sockets
1310[ 122.370770] Else: connected sockets
1311[ 122.370770] -t TCP sockets
1312[ 122.370770] -u UDP sockets
1313[ 122.370770] -w Raw sockets
1314[ 122.370770] -x Unix sockets
1315[ 122.370770] Else: all socket types
1316[ 122.370770] -e Other/more information
1317[ 122.370770] -n Don't resolve names
1318[ 122.370770]
1319[ 122.371712] cat: write error: Invalid argument
1320[ 122.375389] mkdir: can't create directory '/init-ctl': File exists
1321[ 122.375872] mkfifo: /init-ctl/stdin: File exists
1322[ 122.376091] ########################## Beginning inject loop
1323[ 125.379446] /scripts/panic/telnet: line 158: can't open /init-ctl/stdin: Interrupted system call
1324[ 127.512291] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1325[ 127.513926] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32193, 35
1326[ 127.513934] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1327[ 127.518278] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000
1328[ 137.513950] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1329[ 137.515568] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32192, 35
1330[ 137.515576] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1331[ 137.520283] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3994000
1332[ 147.515593] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1333[ 147.517258] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32192, 35
1334[ 147.517266] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 350 , disabled_delay_times = 0 , enabled_delay_times = 0
1335[ 147.521725] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3995000