· 6 years ago · Jan 11, 2020, 05:52 PM
1ctive_slot is normal
2load dtb from 0x1000000 ......
3 Amlogic multi-dtb tool
4 Single dtb detected
5## Flattened Device Tree blob at 01000000
6 Booting using the fdt blob at 0x1000000
7find 1 dtbos
8No androidboot.dtbo_idx configured
9And no dtbos will be applied
10libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
11[rsvmem] fdt get prop fail.
12 Loading Ramdisk to 73759000, end 73e67667 ... OK
13 Loading Device Tree to 000000001fff3000, end 000000001ffffac4 ... OK
14fdt_instaboot: no instaboot image
15
16Starting kernel ...
17
18uboot time: 11730072 us
19[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
20[ 0.000000] Linux version 5.5.0-02 (spiker@Khadas) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT 0
21[ 0.000000] Machine model: Khadas VIM
22[ 0.000000] efi: Getting EFI parameters from FDT:
23[ 0.000000] efi: UEFI not found.
24[ 0.000000] Reserved memory: created CMA memory pool at 0x000000003b400000, size 896 MiB
25[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
26[ 0.000000] NUMA: No NUMA configuration found
27[ 0.000000] NUMA: Faking a node at [mem 0x0000000001000000-0x0000000077ffffff]
28[ 0.000000] NUMA: NODE_DATA [mem 0x77c29100-0x77c2afff]
29[ 0.000000] Zone ranges:
30[ 0.000000] DMA [mem 0x0000000001000000-0x000000003fffffff]
31[ 0.000000] DMA32 [mem 0x0000000040000000-0x0000000077ffffff]
32[ 0.000000] Normal empty
33[ 0.000000] Movable zone start for each node
34[ 0.000000] Early memory node ranges
35[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
36[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
37[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
38[ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x0000000077ffffff]
39[ 0.000000] psci: probing for conduit method from DT.
40[ 0.000000] psci: PSCIv0.2 detected in firmware.
41[ 0.000000] psci: Using standard PSCI v0.2 function IDs
42[ 0.000000] psci: Trusted OS migration not required
43[ 0.000000] percpu: Embedded 22 pages/cpu s51992 r8192 d29928 u90112
44[ 0.000000] Detected VIPT I-cache on CPU0
45[ 0.000000] CPU features: detected: ARM erratum 845719
46[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336
47[ 0.000000] Policy zone: DMA32
48[ 0.000000] Kernel command line: root=LABEL=ROOT rootflags=data=writeback rw console=ttyAML0h
49[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
50[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
51[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
52[ 0.000000] software IO TLB: mapped [mem 0x37400000-0x3b400000] (64MB)
53[ 0.000000] Memory: 853200K/1911808K available (15164K kernel code, 1476K rwdata, 6464K roda)
54[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x78/0x148 with crng_0
55[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
56[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
57[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
58[ 0.000000] Tasks RCU enabled.
59[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
60[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
61[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
62[ 0.000000] GIC: Using split EOI/Deactivate mode
63[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
64[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
65[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, ms
66[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
67[ 0.000447] Console: colour dummy device 80x25
68[ 0.000851] printk: console [tty0] enabled
69[ 0.000943] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00)
70[ 0.000965] pid_max: default: 32768 minimum: 301
71[ 0.001072] LSM: Security Framework initializing
72[ 0.001123] SELinux: Initializing.
73[ 0.001194] *** VALIDATE SELinux ***
74[ 0.001256] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
75[ 0.001280] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
76[ 0.001345] *** VALIDATE tmpfs ***
77[ 0.001771] *** VALIDATE proc ***
78[ 0.002002] *** VALIDATE cgroup1 ***
79[ 0.002018] *** VALIDATE cgroup2 ***
80[ 0.023980] ASID allocator initialised with 32768 entries
81[ 0.031966] rcu: Hierarchical SRCU implementation.
82[ 0.042293] EFI services will not be available.
83[ 0.048016] smp: Bringing up secondary CPUs ...
84[ 0.080233] Detected VIPT I-cache on CPU1
85[ 0.080285] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
86[ 0.112276] Detected VIPT I-cache on CPU2
87[ 0.112325] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
88[ 0.144324] Detected VIPT I-cache on CPU3
89[ 0.144369] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
90[ 0.144447] smp: Brought up 1 node, 4 CPUs
91[ 0.144511] SMP: Total of 4 processors activated.
92[ 0.144523] CPU features: detected: 32-bit EL0 Support
93[ 0.144535] CPU features: detected: CRC32 instructions
94[ 0.154493] CPU: All CPU(s) started at EL2
95[ 0.154550] alternatives: patching kernel code
96[ 0.155739] devtmpfs: initialized
97[ 0.161895] Registered cp15_barrier emulation handler
98[ 0.161925] Registered setend emulation handler
99[ 0.161939] KASLR disabled due to lack of seed
100[ 0.162297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645s
101[ 0.162330] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
102[ 0.164436] cma: CMA area linux,cma could not be activated
103[ 0.164677] xor: measuring software checksum speed
104[ 0.204352] 8regs : 2375.000 MB/sec
105[ 0.244380] 32regs : 2724.000 MB/sec
106[ 0.284414] arm64_neon: 2335.000 MB/sec
107[ 0.284425] xor: using function: 32regs (2724.000 MB/sec)
108[ 0.284494] pinctrl core: initialized pinctrl subsystem
109[ 0.285219] thermal_sys: Registered thermal governor 'step_wise'
110[ 0.285404] DMI not present or invalid.
111[ 0.285764] NET: Registered protocol family 16
112[ 0.286289] DMA: failed to allocate 256 KiB pool for atomic coherent allocation
113[ 0.286321] audit: initializing netlink subsys (disabled)
114[ 0.286484] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
115[ 0.287846] cpuidle: using governor ladder
116[ 0.287969] cpuidle: using governor menu
117[ 0.288328] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
118[ 0.289214] Serial: AMBA PL011 UART driver
119[ 0.305193] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
120[ 0.305219] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
121[ 0.305232] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
122[ 0.305244] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
123[ 0.309179] cryptd: max_cpu_qlen set to 1000
124[ 0.384648] raid6: neonx8 gen() 1615 MB/s
125[ 0.452699] raid6: neonx8 xor() 1505 MB/s
126[ 0.520771] raid6: neonx4 gen() 1566 MB/s
127[ 0.588822] raid6: neonx4 xor() 1471 MB/s
128[ 0.656908] raid6: neonx2 gen() 1200 MB/s
129[ 0.724926] raid6: neonx2 xor() 1220 MB/s
130[ 0.793032] raid6: neonx1 gen() 788 MB/s
131[ 0.861061] raid6: neonx1 xor() 917 MB/s
132[ 0.929143] raid6: int64x8 gen() 1195 MB/s
133[ 0.997174] raid6: int64x8 xor() 770 MB/s
134[ 1.065202] raid6: int64x4 gen() 1029 MB/s
135[ 1.133277] raid6: int64x4 xor() 751 MB/s
136[ 1.201319] raid6: int64x2 gen() 728 MB/s
137[ 1.269384] raid6: int64x2 xor() 612 MB/s
138[ 1.337400] raid6: int64x1 gen() 490 MB/s
139[ 1.405460] raid6: int64x1 xor() 469 MB/s
140[ 1.405470] raid6: using algorithm neonx8 gen() 1615 MB/s
141[ 1.405480] raid6: .... xor() 1505 MB/s, rmw enabled
142[ 1.405491] raid6: using neon recovery algorithm
143[ 1.406089] fbcon: Taking over console
144[ 1.406144] ACPI: Interpreter disabled.
145[ 1.407552] iommu: Default domain type: Translated
146[ 1.407903] vgaarb: loaded
147[ 1.408305] SCSI subsystem initialized
148[ 1.408721] usbcore: registered new interface driver usbfs
149[ 1.408770] usbcore: registered new interface driver hub
150[ 1.408837] usbcore: registered new device driver usb
151[ 1.409310] pps_core: LinuxPPS API ver. 1 registered
152[ 1.409326] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@l>
153[ 1.409349] PTP clock support registered
154[ 1.409498] EDAC MC: Ver: 3.0.0
155[ 1.410125] FPGA manager framework
156[ 1.410228] Advanced Linux Sound Architecture Driver Initialized.
157[ 1.410716] NetLabel: Initializing
158[ 1.410729] NetLabel: domain hash size = 128
159[ 1.410738] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
160[ 1.410799] NetLabel: unlabeled traffic allowed by default
161[ 1.411296] clocksource: Switched to clocksource arch_sys_counter
162[ 1.411321] *** VALIDATE bpf ***
163[ 1.411582] VFS: Disk quotas dquot_6.6.0
164[ 1.411646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
165[ 1.411777] FS-Cache: Loaded
166[ 1.411788] *** VALIDATE ramfs ***
167[ 1.411814] *** VALIDATE hugetlbfs ***
168[ 1.412204] pnp: PnP ACPI: disabled
169[ 1.418009] NET: Registered protocol family 2
170[ 1.418496] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
171[ 1.418544] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
172[ 1.418663] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
173[ 1.418872] TCP: Hash tables configured (established 16384 bind 16384)
174[ 1.419028] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
175[ 1.419083] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
176[ 1.419375] NET: Registered protocol family 1
177[ 1.419800] RPC: Registered named UNIX socket transport module.
178[ 1.419822] RPC: Registered udp transport module.
179[ 1.419831] RPC: Registered tcp transport module.
180[ 1.419840] RPC: Registered tcp NFSv4.1 backchannel transport module.
181[ 1.419856] NET: Registered protocol family 44
182[ 1.419877] PCI: CLS 0 bytes, default 64
183[ 1.420080] Trying to unpack rootfs image as initramfs...
184[ 1.713383] Freeing initrd memory: 7224K
185[ 1.714288] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
186[ 1.866150] Initialise system trusted keyrings
187[ 1.866362] workingset: timestamp_bits=44 max_order=18 bucket_order=0
188[ 1.872209] zbud: loaded
189[ 1.873662] squashfs: version 4.0 (2009/01/31) Phillip Lougher
190[ 1.873966] FS-Cache: Netfs 'nfs' registered for caching
191[ 1.874516] NFS: Registering the id_resolver key type
192[ 1.874555] Key type id_resolver registered
193[ 1.874565] Key type id_legacy registered
194[ 1.874580] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
195[ 1.874593] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
196[ 1.875816] FS-Cache: Netfs 'cifs' registered for caching
197[ 1.876176] Key type cifs.spnego registered
198[ 1.876201] Key type cifs.idmap registered
199[ 1.876226] ntfs: driver 2.1.32 [Flags: R/W].
200[ 1.876830] JFS: nTxBlock = 7330, nTxLock = 58640
201[ 1.881177] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
202[ 1.882605] *** VALIDATE xfs ***
203[ 1.882932] ocfs2: Registered cluster interface o2cb
204[ 1.883174] OCFS2 User DLM kernel interface loaded
205[ 1.884571] *** VALIDATE gfs2 ***
206[ 1.884884] gfs2: GFS2 installed
207[ 1.904686] Key type asymmetric registered
208[ 1.904712] Asymmetric key parser 'x509' registered
209[ 1.904723] Asymmetric key parser 'pkcs8' registered
210[ 1.904788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
211[ 1.904964] io scheduler mq-deadline registered
212[ 1.904978] io scheduler kyber registered
213[ 1.905184] io scheduler bfq registered
214[ 1.920103] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
215[ 1.924198] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
216[ 1.926110] Serial: AMBA driver
217[ 1.926493] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is at
218[ 1.926661] serial serial0: tty port ttyAML6 registered
219[ 1.926901] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is at
220[ 2.991983] printk: console [ttyAML0] enabled
221[ 2.996870] c81004e0.serial: ttyAML2 at MMIO 0xc81004e0 (irq = 16, base_baud = 1500000) is at
222[ 3.017816] brd: module loaded
223[ 3.026476] loop: module loaded
224[ 3.029175] libphy: Fixed MDIO Bus: probed
225[ 3.029906] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
226[ 3.034654] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
227[ 3.040836] meson8b-dwmac c9410000.ethernet: PTP uses main clock
228[ 3.046698] meson8b-dwmac c9410000.ethernet: no reset control found
229[ 3.053373] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
230[ 3.060000] meson8b-dwmac c9410000.ethernet: DWMAC1000
231[ 3.065152] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
232[ 3.072567] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
233[ 3.079984] meson8b-dwmac c9410000.ethernet: COE Type 2
234[ 3.085158] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
235[ 3.092144] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
236[ 3.098566] meson8b-dwmac c9410000.ethernet: Normal descriptors
237[ 3.104393] meson8b-dwmac c9410000.ethernet: Ring mode enabled
238[ 3.110171] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
239[ 3.118295] libphy: stmmac: probed
240[ 3.123985] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
241[ 3.128025] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
242[ 3.133492] ehci-pci: EHCI PCI platform driver
243[ 3.137933] ehci-platform: EHCI generic platform driver
244[ 3.143241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
245[ 3.149169] ohci-pci: OHCI PCI platform driver
246[ 3.153595] ohci-platform: OHCI generic platform driver
247[ 3.159440] usbcore: registered new interface driver usb-storage
248[ 3.164906] mousedev: PS/2 mouse device common for all mice
249[ 3.170992] i2c /dev entries driver
250[ 3.178644] sdhci: Secure Digital Host Controller Interface driver
251[ 3.179796] sdhci: Copyright(c) Pierre Ossman
252[ 3.184108] Synopsys Designware Multimedia Card Interface Driver
253[ 3.191515] meson-gx-mmc d0072000.mmc: Got CD GPIO
254[ 3.221578] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
255[ 3.248226] sdhci-pltfm: SDHCI platform and OF driver helper
256[ 3.249558] ledtrig-cpu: registered to indicate activity on CPUs
257[ 3.255107] meson-sm: secure-monitor enabled
258[ 3.259184] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
259[ 3.266385] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
260[ 3.285133] hid: raw HID events driver (C) Jiri Kosina
261[ 3.285545] usbcore: registered new interface driver usbhid
262[ 3.290185] usbhid: USB HID core driver
263[ 3.294499] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
264[BL31]: tee size: 0
265[ 3.306652] NET: Registered protocol family 17
266[ 3.307201] Key type dns_resolver registered
267[ 3.311990] registered taskstats version 1
268[ 3.315270] Loading compiled-in X.509 certificates
269[ 3.320140] zswap: loaded using pool lzo/zbud
270[ 3.324597] Key type ._fscrypt registered
271[ 3.328380] Key type .fscrypt registered
272[ 3.333210] Btrfs loaded, crc32c=crc32c-generic
273[ 3.351438] Key type encrypted registered
274[ 3.370005] meson-drm d0100000.vpu: Queued 2 outputs on vpu
275[ 3.370344] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
276[ 3.376617] [drm] No driver support for vblank timestamp query.
277[ 3.382644] meson-drm d0100000.vpu: CVBS Output connector not available
278[ 3.406846] mmc1: new HS200 MMC card at address 0001
279[ 3.407663] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
280[ 3.410989] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
281[ 3.416843] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
282[ 3.422486] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (me)
283[ 3.432380] mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB, chardev (243:0)
284[ 3.439745] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
285[ 3.447934] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
286[ 3.458020] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
287[ 3.550833] random: fast init done
288[ 3.570530] meson-drm d0100000.vpu: [drm:drm_fbdev_client_hotplug] *ERROR* fbdev: Failed to )
289[ 3.576929] libphy: mdio_mux: probed
290[ 3.585075] libphy: mdio_mux: probed
291[ 3.585494] phy phy-d0078080.phy.2: unsupported PHY mode 5
292[ 3.590787] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
293[ 3.594155] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
294[ 3.601836] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x000000
295[ 3.611076] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0xc9000000
296[ 3.617189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
297[ 3.625095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
298[ 3.632248] usb usb1: Product: xHCI Host Controller
299[ 3.637074] usb usb1: Manufacturer: Linux 5.5.0-02 xhci-hcd
300[ 3.642592] usb usb1: SerialNumber: xhci-hcd.0.auto
301[ 3.647934] hub 1-0:1.0: USB hub found
302[ 3.651147] hub 1-0:1.0: 2 ports detected
303[ 3.655426] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
304[ 3.660544] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
305[ 3.668133] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
306[ 3.674654] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
307[ 3.682708] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
308[ 3.690808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
309[ 3.697965] usb usb2: Product: xHCI Host Controller
310[ 3.702794] usb usb2: Manufacturer: Linux 5.5.0-02 xhci-hcd
311[ 3.708314] usb usb2: SerialNumber: xhci-hcd.0.auto
312[ 3.713606] hub 2-0:1.0: USB hub found
313[ 3.716887] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
314[ 3.725839] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
315[ 3.756259] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
316domain-0 init dvfs: 4
317[ 3.768699] printk: console [netcon0] enabled
318[ 3.768732] netconsole: network logging started
319[ 3.771938] hctosys: unable to open rtc device (rtc0)
320[ 3.777509] ALSA device list:
321[ 3.779999] No soundcards found.
322[ 3.785485] Freeing unused kernel memory: 3648K
323[ 3.787997] Run /init as init process
324[ 3.799845] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
325[ 3.802010] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
326[ 3.807336] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
327[ 3.814423] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
328[ 3.820682] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
329[ 3.943220] mmc2: new high speed SDIO card at address 0001
330[ 3.987357] usb 1-1: new high-speed USB device number 2 using xhci-hcd
331[ 4.139586] usb 1-1: New USB device found, idVendor=1a40, idProduct=0801, bcdDevice= 1.00
332[ 4.142128] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
333[ 4.149242] usb 1-1: Product: USB 2.0 Hub
334[ 4.154663] ------------[ cut here ]------------
335[ 4.157791] coherent pool not initialised!
336[ 4.161845] WARNING: CPU: 1 PID: 33 at kernel/dma/remap.c:190 dma_alloc_from_pool+0x94/0xa0
337[ 4.170064] Modules linked in:
338[ 4.173087] CPU: 1 PID: 33 Comm: kworker/1:1 Not tainted 5.5.0-02 #1
339[ 4.179379] Hardware name: Khadas VIM (DT)
340[ 4.183442] Workqueue: usb_hub_wq hub_event
341[ 4.187576] pstate: 60000005 (nZCv daif -PAN -UAO)
342[ 4.192338] pc : dma_alloc_from_pool+0x94/0xa0
343[ 4.196718] lr : dma_alloc_from_pool+0x94/0xa0
344[ 4.201115] sp : ffff800010143630
345[ 4.204393] x29: ffff800010143630 x28: ffff000074c58000
346[ 4.209653] x27: ffff000036116000 x26: ffff000074c59898
347[ 4.214914] x25: 0000000000000000 x24: ffff800011134b24
348[ 4.220176] x23: 0000000000001000 x22: ffff000036d27998
349[ 4.225448] x21: ffff80001249d000 x20: ffff0000073c1810
350[ 4.230697] x19: 0000000000000000 x18: 0000000000000010
351[ 4.235959] x17: 0000000000000001 x16: 0000000000000019
352[ 4.241221] x15: ffff0000775fae68 x14: 0720072007200720
353[ 4.246482] x13: 0720072007200720 x12: 0720072007200720
354[ 4.251743] x11: 0720072007200720 x10: 0720072007200720
355[ 4.257005] x9 : 0720072007200720 x8 : ffff800011a47ee8
356[ 4.262266] x7 : 0000000000000144 x6 : ffff000077430f00
357[ 4.267537] x5 : 0000000000000000 x4 : 0000000000000000
358[ 4.272787] x3 : 00000000ffffffff x2 : ffff8000129784a0
359[ 4.278050] x1 : 926b5d6dd56e0100 x0 : 0000000000000000
360[ 4.283311] Call trace:
361[ 4.285732] dma_alloc_from_pool+0x94/0xa0
362[ 4.289782] dma_direct_alloc_pages+0x220/0x250
363[ 4.294267] dma_direct_alloc+0xc/0x18
364[ 4.297976] dma_alloc_attrs+0x7c/0xe8
365[ 4.301686] dma_pool_alloc+0x118/0x1b8
366[ 4.305480] xhci_alloc_container_ctx+0x9c/0x108
367[ 4.310050] xhci_alloc_command_with_ctx+0x34/0x68
368[ 4.314795] xhci_endpoint_reset+0xd4/0x340
369[ 4.318936] usb_hcd_reset_endpoint+0x20/0x90
370[ 4.323249] usb_enable_endpoint+0xac/0xb0
371[ 4.327302] usb_enable_interface+0x48/0x70
372[ 4.331442] usb_set_configuration+0x284/0x8f8
373[ 4.335842] generic_probe+0x48/0x88
374[ 4.339378] usb_probe_device+0x2c/0x80
375[ 4.343171] really_probe+0xd8/0x428
376[ 4.346707] driver_probe_device+0xdc/0x130
377[ 4.350846] __device_attach_driver+0x88/0x108
378[ 4.355248] bus_for_each_drv+0x74/0xc0
379[ 4.359040] __device_attach+0xdc/0x160
380[ 4.362835] device_initial_probe+0x10/0x18
381[ 4.366975] bus_probe_device+0x90/0x98
382[ 4.370773] device_add+0x430/0x770
383[ 4.374224] usb_new_device+0x2e0/0x778
384[ 4.378016] hub_event+0x610/0x1698
385[ 4.381467] process_one_work+0x198/0x320
386[ 4.385433] worker_thread+0x48/0x420
387[ 4.389057] kthread+0xf0/0x120
388[ 4.392161] ret_from_fork+0x10/0x18
389[ 4.395695] ---[ end trace 5402857a32249485 ]---
390[ 4.400652] hub 1-1:1.0: USB hub found
391[ 4.404094] hub 1-1:1.0: 4 ports detected
392[ 4.695323] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd
393[ 4.797302] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00
394[ 4.800355] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
395[ 4.807598] usb 1-1.3: Product: Cruzer Blade
396[ 4.811765] usb 1-1.3: Manufacturer: SanDisk
397[ 4.815991] usb 1-1.3: SerialNumber: 4C530000170110114573
398[ 4.825049] ------------[ cut here ]------------
399[ 4.825805] coherent pool not initialised!
400[ 4.829874] WARNING: CPU: 3 PID: 286 at kernel/dma/remap.c:190 dma_alloc_from_pool+0x94/0xa0
401[ 4.838199] Modules linked in:
402[ 4.841223] CPU: 3 PID: 286 Comm: kworker/3:2 Tainted: G W 5.5.0-02 #1
403[ 4.848980] Hardware name: Khadas VIM (DT)
404[ 4.853042] Workqueue: usb_hub_wq hub_event
405[ 4.857176] pstate: 60000005 (nZCv daif -PAN -UAO)
406[ 4.861919] pc : dma_alloc_from_pool+0x94/0xa0
407[ 4.866317] lr : dma_alloc_from_pool+0x94/0xa0
408[ 4.870714] sp : ffff800010ebb630
409[ 4.873992] x29: ffff800010ebb630 x28: ffff0000361a5000
410[ 4.879253] x27: ffff000074d26000 x26: ffff0000361a4c98
411[ 4.884514] x25: 0000000000000000 x24: ffff800011134b24
412[ 4.889778] x23: 0000000000001000 x22: ffff0000360ad998
413[ 4.895047] x21: ffff80001249d000 x20: ffff0000073c1810
414[ 4.900298] x19: 0000000000000000 x18: 0000000000000010
415[ 4.905559] x17: 0000000000000001 x16: 0000000000000019
416[ 4.910821] x15: ffff000074c04a68 x14: 0720072007200720
417[ 4.916082] x13: 0720072007200720 x12: 0720072007200720
418[ 4.921343] x11: 0720072007200720 x10: 0720072007200720
419[ 4.926605] x9 : 0720072007200720 x8 : ffff800011a47ee8
420[ 4.931866] x7 : 0000000000000184 x6 : ffff000077430f00
421[ 4.937127] x5 : 0000000000000000 x4 : 0000000000000000
422[ 4.942388] x3 : 00000000ffffffff x2 : ffff8000129784a0
423[ 4.947649] x1 : 3da78559a1bb8a00 x0 : 0000000000000000
424[ 4.952912] Call trace:
425[ 4.955332] dma_alloc_from_pool+0x94/0xa0
426[ 4.959381] dma_direct_alloc_pages+0x220/0x250
427[ 4.963866] dma_direct_alloc+0xc/0x18
428[ 4.967575] dma_alloc_attrs+0x7c/0xe8
429[ 4.971286] dma_pool_alloc+0x118/0x1b8
430[ 4.975081] xhci_alloc_container_ctx+0x9c/0x108
431[ 4.979650] xhci_alloc_command_with_ctx+0x34/0x68
432[ 4.984394] xhci_endpoint_reset+0xd4/0x340
433[ 4.988535] usb_hcd_reset_endpoint+0x20/0x90
434[ 4.992846] usb_enable_endpoint+0xac/0xb0
435[ 4.996900] usb_enable_interface+0x48/0x70
436[ 5.001040] usb_set_configuration+0x284/0x8f8
437[ 5.005439] generic_probe+0x48/0x88
438[ 5.008976] usb_probe_device+0x2c/0x80
439[ 5.012771] really_probe+0xd8/0x428
440[ 5.016306] driver_probe_device+0xdc/0x130
441[ 5.020446] __device_attach_driver+0x88/0x108
442[ 5.024847] bus_for_each_drv+0x74/0xc0
443[ 5.028639] __device_attach+0xdc/0x160
444[ 5.032435] device_initial_probe+0x10/0x18
445[ 5.036574] bus_probe_device+0x90/0x98
446[ 5.040370] device_add+0x430/0x770
447[ 5.043821] usb_new_device+0x2e0/0x778
448[ 5.047615] hub_event+0x610/0x1698
449[ 5.051066] process_one_work+0x198/0x320
450[ 5.055032] worker_thread+0x48/0x420
451[ 5.058656] kthread+0xf0/0x120
452[ 5.061761] ret_from_fork+0x10/0x18
453[ 5.065296] ---[ end trace 5402857a32249486 ]---
454[ 5.069912] ------------[ cut here ]------------
455[ 5.074447] coherent pool not initialised!
456[ 5.078508] WARNING: CPU: 3 PID: 286 at kernel/dma/remap.c:190 dma_alloc_from_pool+0x94/0xa0
457[ 5.086857] Modules linked in:
458[ 5.089880] CPU: 3 PID: 286 Comm: kworker/3:2 Tainted: G W 5.5.0-02 #1
459[ 5.097638] Hardware name: Khadas VIM (DT)
460[ 5.101697] Workqueue: usb_hub_wq hub_event
461[ 5.105834] pstate: 60000005 (nZCv daif -PAN -UAO)
462[ 5.110577] pc : dma_alloc_from_pool+0x94/0xa0
463[ 5.114976] lr : dma_alloc_from_pool+0x94/0xa0
464[ 5.119373] sp : ffff800010ebb630
465[ 5.122651] x29: ffff800010ebb630 x28: ffff0000361a5000
466[ 5.127912] x27: ffff000074d26000 x26: ffff0000361a4c98
467[ 5.133173] x25: 0000000000000000 x24: ffff800011134b24
468[ 5.138434] x23: 0000000000001000 x22: ffff0000360ad998
469[ 5.143696] x21: ffff80001249d000 x20: ffff0000073c1810
470[ 5.148957] x19: 0000000000000000 x18: 0000000000000010
471[ 5.154218] x17: 0000000000000001 x16: 0000000000000019
472[ 5.159479] x15: ffff000074c04a68 x14: 0720072007200720
473[ 5.164741] x13: 0720072007200720 x12: 0720072007200720
474[ 5.170002] x11: 0720072007200720 x10: 0720072007200720
475[ 5.175263] x9 : 0720072007200720 x8 : ffff800011a47ee8
476[ 5.180524] x7 : 00000000000001bc x6 : ffff000077430f00
477[ 5.185785] x5 : 0000000000000000 x4 : 0000000000000000
478[ 5.191047] x3 : 00000000ffffffff x2 : ffff8000129784a0
479[ 5.196308] x1 : 3da78559a1bb8a00 x0 : 0000000000000000
480[ 5.201569] Call trace:
481[ 5.203986] dma_alloc_from_pool+0x94/0xa0
482[ 5.208039] dma_direct_alloc_pages+0x220/0x250
483[ 5.212524] dma_direct_alloc+0xc/0x18
484[ 5.216233] dma_alloc_attrs+0x7c/0xe8
485[ 5.219943] dma_pool_alloc+0x118/0x1b8
486[ 5.223738] xhci_alloc_container_ctx+0x9c/0x108
487[ 5.228309] xhci_alloc_command_with_ctx+0x34/0x68
488[ 5.233052] xhci_endpoint_reset+0xd4/0x340
489[ 5.237192] usb_hcd_reset_endpoint+0x20/0x90
490[ 5.241505] usb_enable_endpoint+0xac/0xb0
491[ 5.245558] usb_enable_interface+0x48/0x70
492[ 5.249698] usb_set_configuration+0x284/0x8f8
493[ 5.254097] generic_probe+0x48/0x88
494[ 5.257634] usb_probe_device+0x2c/0x80
495[ 5.261429] really_probe+0xd8/0x428
496[ 5.264964] driver_probe_device+0xdc/0x130
497[ 5.269105] __device_attach_driver+0x88/0x108
498[ 5.273504] bus_for_each_drv+0x74/0xc0
499[ 5.277298] __device_attach+0xdc/0x160
500[ 5.281093] device_initial_probe+0x10/0x18
501[ 5.285233] bus_probe_device+0x90/0x98
502[ 5.289028] device_add+0x430/0x770
503[ 5.292483] usb_new_device+0x2e0/0x778
504[ 5.296279] hub_event+0x610/0x1698
505[ 5.299725] process_one_work+0x198/0x320
506[ 5.303691] worker_thread+0x48/0x420
507[ 5.307316] kthread+0xf0/0x120
508[ 5.310420] ret_from_fork+0x10/0x18
509[ 5.313954] ---[ end trace 5402857a32249487 ]---
510[ 5.318843] usb-storage 1-1.3:1.0: USB Mass Storage device detected
511[ 5.325060] scsi host0: usb-storage 1-1.3:1.0
512[ 5.332568] usbcore: registered new interface driver uas
513[ 5.407746] usb 1-1.4: new high-speed USB device number 4 using xhci-hcd
514[ 5.509590] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.64
515[ 5.512626] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
516[ 5.519882] usb 1-1.4: Product: USB2.0 Hub
517[ 5.530630] ------------[ cut here ]------------
518[ 5.530679] coherent pool not initialised!
519[ 5.533751] WARNING: CPU: 3 PID: 286 at kernel/dma/remap.c:190 dma_alloc_from_pool+0x94/0xa0
520[ 5.542052] Modules linked in: uas
521[ 5.545425] CPU: 3 PID: 286 Comm: kworker/3:2 Tainted: G W 5.5.0-02 #1
522[ 5.553176] Hardware name: Khadas VIM (DT)
523[ 5.557238] Workqueue: usb_hub_wq hub_event
524[ 5.561372] pstate: 60000005 (nZCv daif -PAN -UAO)
525[ 5.566116] pc : dma_alloc_from_pool+0x94/0xa0
526[ 5.570514] lr : dma_alloc_from_pool+0x94/0xa0
527[ 5.574911] sp : ffff800010ebb630
528[ 5.578189] x29: ffff800010ebb630 x28: ffff0000361a7800
529[ 5.583450] x27: ffff0000362e0000 x26: ffff0000361a6c98
530[ 5.588711] x25: 0000000000000000 x24: ffff800011134b24
531[ 5.593972] x23: 0000000000001000 x22: ffff000036185b98
532[ 5.599234] x21: ffff80001249d000 x20: ffff0000073c1810
533[ 5.604495] x19: 0000000000000000 x18: 0000000000000010
534[ 5.609756] x17: 00000000d2cab700 x16: 00000000f4c6f4d7
535[ 5.615017] x15: ffff000074c04a68 x14: 0720072007200720
536[ 5.620279] x13: 0720072007200720 x12: 0720072007200720
537[ 5.625540] x11: 0720072007200720 x10: 0720072007200720
538[ 5.630801] x9 : 0720072007200720 x8 : ffff800011a47ee8
539[ 5.636062] x7 : 00000000000001fb x6 : ffff000077430f00
540[ 5.641324] x5 : 0000000000000000 x4 : 0000000000000000
541[ 5.646585] x3 : 00000000ffffffff x2 : ffff8000129784a0
542[ 5.651846] x1 : 3da78559a1bb8a00 x0 : 0000000000000000
543[ 5.657108] Call trace:
544[ 5.659525] dma_alloc_from_pool+0x94/0xa0
545[ 5.663578] dma_direct_alloc_pages+0x220/0x250
546[ 5.668062] dma_direct_alloc+0xc/0x18
547[ 5.671771] dma_alloc_attrs+0x7c/0xe8
548[ 5.675482] dma_pool_alloc+0x118/0x1b8
549[ 5.679278] xhci_alloc_container_ctx+0x9c/0x108
550[ 5.683847] xhci_alloc_command_with_ctx+0x34/0x68
551[ 5.688590] xhci_endpoint_reset+0xd4/0x340
552[ 5.692731] usb_hcd_reset_endpoint+0x20/0x90
553[ 5.697043] usb_enable_endpoint+0xac/0xb0
554[ 5.701096] usb_enable_interface+0x48/0x70
555[ 5.705236] usb_set_configuration+0x284/0x8f8
556[ 5.709636] generic_probe+0x48/0x88
557[ 5.713172] usb_probe_device+0x2c/0x80
558[ 5.716968] really_probe+0xd8/0x428
559[ 5.720502] driver_probe_device+0xdc/0x130
560[ 5.724643] __device_attach_driver+0x88/0x108
561[ 5.729043] bus_for_each_drv+0x74/0xc0
562[ 5.732837] __device_attach+0xdc/0x160
563[ 5.736631] device_initial_probe+0x10/0x18
564[ 5.740771] bus_probe_device+0x90/0x98
565[ 5.744567] device_add+0x430/0x770
566[ 5.748017] usb_new_device+0x2e0/0x778
567[ 5.751812] hub_event+0x610/0x1698
568[ 5.755263] process_one_work+0x198/0x320
569[ 5.759229] worker_thread+0x48/0x420
570[ 5.762853] kthread+0xf0/0x120
571[ 5.765958] ret_from_fork+0x10/0x18
572[ 5.769492] ---[ end trace 5402857a32249488 ]---
573[ 5.774498] hub 1-1.4:1.0: USB hub found
574[ 5.778223] hub 1-1.4:1.0: 4 ports detected
575[ 6.071448] usb 1-1.4.4: new low-speed USB device number 5 using xhci-hcd
576[ 6.178375] usb 1-1.4.4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
577[ 6.181658] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
578[ 6.188987] usb 1-1.4.4: Product: USB Keyboard
579[ 6.193380] usb 1-1.4.4: Manufacturer: SIGMACHIP
580[ 6.202642] ------------[ cut here ]------------
581[ 6.202681] coherent pool not initialised!
582[ 6.206484] WARNING: CPU: 0 PID: 264 at kernel/dma/remap.c:190 dma_alloc_from_pool+0x94/0xa0
583[ 6.214810] Modules linked in: uas
584[ 6.218178] CPU: 0 PID: 264 Comm: kworker/0:2 Tainted: G W 5.5.0-02 #1
585[ 6.225935] Hardware name: Khadas VIM (DT)
586[ 6.229997] Workqueue: usb_hub_wq hub_event
587[ 6.234131] pstate: 60000005 (nZCv daif -PAN -UAO)
588[ 6.238875] pc : dma_alloc_from_pool+0x94/0xa0
589[ 6.243272] lr : dma_alloc_from_pool+0x94/0xa0
590[ 6.247670] sp : ffff800010cf3630
591[ 6.250948] x29: ffff800010cf3630 x28: ffff000036029c00
592[ 6.256209] x27: ffff00003589c000 x26: ffff000036029098
593[ 6.261470] x25: 0000000000000000 x24: ffff800011134b24
594[ 6.266731] x23: 0000000000001000 x22: ffff000036ea6098
595[ 6.271992] x21: ffff80001249d000 x20: ffff0000073c1810
596[ 6.277253] x19: 0000000000000000 x18: 0000000000000010
597[ 6.282515] x17: 0000000000000000 x16: 0000000000000000
598[ 6.287776] x15: ffff00007777ca68 x14: 0720072007200720
599[ 6.291300] cpufreq: __target_index: Failed to change cpu frequency: -5
600[ 6.293037] x13: 0720072007200720 x12: 0720072007200720
601[ 6.304853] x11: 0720072007200720 x10: 0720072007200720
602[ 6.310115] x9 : 0720072007200720 x8 : ffff800011a47ee8
603[ 6.315376] x7 : 000000000000023a x6 : ffff000077430f00
604[ 6.320637] x5 : 0000000000000000 x4 : 0000000000000000
605[ 6.325898] x3 : 00000000ffffffff x2 : ffff8000129784a0
606[ 6.331160] x1 : a971e07aaec60a00 x0 : 0000000000000000
607[ 6.336422] Call trace:
608[ 6.338839] dma_alloc_from_pool+0x94/0xa0
609[ 6.342892] dma_direct_alloc_pages+0x220/0x250
610[ 6.347376] dma_direct_alloc+0xc/0x18
611[ 6.351085] dma_alloc_attrs+0x7c/0xe8
612[ 6.354796] dma_pool_alloc+0x118/0x1b8
613[ 6.358591] xhci_alloc_container_ctx+0x9c/0x108
614[ 6.363161] xhci_alloc_command_with_ctx+0x34/0x68
615[ 6.367904] xhci_endpoint_reset+0xd4/0x340
616[ 6.372045] usb_hcd_reset_endpoint+0x20/0x90
617[ 6.375290] cpufreq: __target_index: Failed to change cpu frequency: -5
618[ 6.376358] usb_enable_endpoint+0xac/0xb0
619[ 6.386965] usb_enable_interface+0x48/0x70
620[ 6.391105] usb_set_configuration+0x284/0x8f8
621[ 6.395505] generic_probe+0x48/0x88
622[ 6.399041] usb_probe_device+0x2c/0x80
623[ 6.402837] really_probe+0xd8/0x428
624[ 6.406371] driver_probe_device+0xdc/0x130
625[ 6.410511] __device_attach_driver+0x88/0x108
626[ 6.414912] bus_for_each_drv+0x74/0xc0
627[ 6.418705] __device_attach+0xdc/0x160
628[ 6.422500] device_initial_probe+0x10/0x18
629[ 6.426640] bus_probe_device+0x90/0x98
630[ 6.430436] device_add+0x430/0x770
631[ 6.433886] usb_new_device+0x2e0/0x778
632[ 6.437681] hub_event+0x610/0x1698
633[ 6.441131] process_one_work+0x198/0x320
634[ 6.445097] worker_thread+0x48/0x420
635[ 6.448722] kthread+0xf0/0x120
636[ 6.451826] ret_from_fork+0x10/0x18
637[ 6.455290] cpufreq: __target_index: Failed to change cpu frequency: -5
638[ 6.455361] ---[ end trace 5402857a32249489 ]---
639[ 6.466589] ------------[ cut here ]------------
640[ 6.471092] coherent pool not initialised!
641[ 6.475152] WARNING: CPU: 0 PID: 264 at kernel/dma/remap.c:190 dma_alloc_from_pool+0x94/0xa0
642[ 6.483478] Modules linked in: uas
643[ 6.486845] CPU: 0 PID: 264 Comm: kworker/0:2 Tainted: G W 5.5.0-02 #1
644[ 6.494604] Hardware name: Khadas VIM (DT)
645[ 6.498665] Workqueue: usb_hub_wq hub_event
646[ 6.502799] pstate: 60000005 (nZCv daif -PAN -UAO)
647[ 6.507543] pc : dma_alloc_from_pool+0x94/0xa0
648[ 6.511941] lr : dma_alloc_from_pool+0x94/0xa0
649[ 6.516338] sp : ffff800010cf3630
650[ 6.519616] x29: ffff800010cf3630 x28: ffff00003602b400
651[ 6.524877] x27: ffff00003589c000 x26: ffff000036029098
652[ 6.530138] x25: 0000000000000000 x24: ffff800011134b24
653[ 6.535400] x23: 0000000000001000 x22: ffff000036ea6d18
654[ 6.540661] x21: ffff80001249d000 x20: ffff0000073c1810
655[ 6.545922] x19: 0000000000000000 x18: 0000000000000010
656[ 6.551183] x17: 0000000000000000 x16: 0000000000000000
657[ 6.556445] x15: ffff00007777ca68 x14: 0720072007200720
658[ 6.561706] x13: 0720072007200720 x12: 0720072007200720
659[ 6.566967] x11: 0720072007200720 x10: 0720072007200720
660[ 6.572228] x9 : 0720072007200720 x8 : ffff800011a47ee8
661[ 6.577490] x7 : 0000000000000275 x6 : ffff000077430f00
662[ 6.582751] x5 : 0000000000000000 x4 : 0000000000000000
663[ 6.588012] x3 : 00000000ffffffff x2 : ffff8000129784a0
664[ 6.593273] x1 : a971e07aaec60a00 x0 : 0000000000000000
665[ 6.598536] Call trace:
666[ 6.600953] dma_alloc_from_pool+0x94/0xa0
667[ 6.605005] dma_direct_alloc_pages+0x220/0x250
668[ 6.609490] dma_direct_alloc+0xc/0x18
669[ 6.613199] dma_alloc_attrs+0x7c/0xe8
670[ 6.616909] dma_pool_alloc+0x118/0x1b8
671[ 6.620705] xhci_alloc_container_ctx+0x9c/0x108
672[ 6.625275] xhci_alloc_command_with_ctx+0x34/0x68
673[ 6.630018] xhci_endpoint_reset+0xd4/0x340
674[ 6.634158] usb_hcd_reset_endpoint+0x20/0x90
675[ 6.638471] usb_enable_endpoint+0xac/0xb0
676[ 6.642524] usb_enable_interface+0x48/0x70
677[ 6.646664] usb_set_configuration+0x284/0x8f8
678[ 6.651063] generic_probe+0x48/0x88
679[ 6.654600] usb_probe_device+0x2c/0x80
680[ 6.658395] really_probe+0xd8/0x428
681[ 6.661930] driver_probe_device+0xdc/0x130
682[ 6.666070] __device_attach_driver+0x88/0x108
683[ 6.670470] bus_for_each_drv+0x74/0xc0
684[ 6.674264] __device_attach+0xdc/0x160
685[ 6.678059] device_initial_probe+0x10/0x18
686[ 6.682198] bus_probe_device+0x90/0x98
687[ 6.685994] device_add+0x430/0x770
688[ 6.689445] usb_new_device+0x2e0/0x778
689[ 6.693239] hub_event+0x610/0x1698
690[ 6.696690] process_one_work+0x198/0x320
691[ 6.700656] worker_thread+0x48/0x420
692[ 6.704280] kthread+0xf0/0x120
693[ 6.707385] ret_from_fork+0x10/0x18
694[ 6.710920] ---[ end trace 5402857a3224948a ]---
695[ 6.715611] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
696[ 6.719847] input: SIGMACHIP USB Keyboard as /devices/platform/soc/soc:usb@c9000000/c90000000
697[ 6.742081] sd 0:0:0:0: Attached scsi generic sg0 type 0
698[ 6.742933] sd 0:0:0:0: [sda] 30842880 512-byte logical blocks: (15.8 GB/14.7 GiB)
699[ 6.754088] sd 0:0:0:0: [sda] Write Protect is off
700[ 6.757339] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPA
701[ 6.800113] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHI0
702[ 6.807518] sda: sda1 sda2
703[ 6.811681] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/soc/soc:usb@1
704[ 6.831574] sd 0:0:0:0: [sda] Attached SCSI removable disk
705[ 6.888696] input: SIGMACHIP USB Keyboard System Control as /devices/platform/soc/soc:usb@c92
706[ 6.902453] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP 1
707[ 11.320702] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
708[ 12.504507] random: crng init done
709[ 12.654701] systemd[1]: System time before build time, advancing clock.
710[ 12.917819] NET: Registered protocol family 10
711[ 12.991391] Segment Routing with IPv6
712[ 13.046998] systemd[1]: systemd 244.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -)
713[ 13.064186] systemd[1]: Detected architecture arm64.
714[ 13.108651] systemd[1]: Set hostname to <Manjaro>.
715[ 13.145957] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output r
716[ 14.381318] systemd[1]: Configuration file /usr/lib/systemd/system/khadas-utils.service is m.
717[ 14.475003] systemd[1]: Configuration file /usr/lib/systemd/system/bluetooth-khadas.service .
718[ 14.495216] systemd[1]: Created slice system-getty.slice.
719[ 14.496816] systemd[1]: Created slice system-serial\x2dgetty.slice.
720[ 14.502447] systemd[1]: Created slice User and Session Slice.
721[ 14.507455] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
722[ 14.515371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
723[ 14.523248] systemd[1]: Set up automount Arbitrary Executable File Formats File System Autom.
724[ 14.531930] systemd[1]: Reached target Local Encrypted Volumes.
725[ 14.537667] systemd[1]: Reached target Paths.
726[ 14.541963] systemd[1]: Reached target Remote Encrypted Volumes.
727[ 14.547860] systemd[1]: Reached target Remote File Systems.
728[ 14.553406] systemd[1]: Reached target Slices.
729[ 14.557797] systemd[1]: Reached target Swap.
730[ 14.562388] systemd[1]: Listening on Device-mapper event daemon FIFOs.
731[ 14.582354] systemd[1]: Listening on LVM2 metadata daemon socket.
732[ 14.585658] systemd[1]: Listening on LVM2 poll daemon socket.
733[ 14.598410] systemd[1]: Listening on Process Core Dump Socket.
734[ 14.599146] systemd[1]: Listening on initctl Compatibility Named Pipe.
735[ 14.606105] systemd[1]: Listening on Journal Audit Socket.
736[ 14.611481] systemd[1]: Listening on Journal Socket (/dev/log).
737[ 14.617263] systemd[1]: Listening on Journal Socket.
738[ 14.622309] systemd[1]: Listening on Network Service Netlink Socket.
739[ 14.628361] systemd[1]: Listening on udev Control Socket.
740[ 14.633583] systemd[1]: Listening on udev Kernel Socket.
741[ 14.642792] systemd[1]: Mounting Huge Pages File System...
742[ 14.648228] systemd[1]: Mounting POSIX Message Queue File System...
743[ 14.654504] systemd[1]: Mounting Kernel Debug File System...
744[ 14.661987] systemd[1]: Mounting Temporary Directory (/tmp)...
745[ 14.667819] systemd[1]: Starting Create list of static device nodes for the current kernel...
746[ 14.675139] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd o.
747[ 14.722359] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being s.
748[ 14.781480] systemd[1]: Starting Load Kernel Modules...
749[ 14.785785] systemd[1]: Starting Remount Root and Kernel File Systems...
750[ 14.792069] systemd[1]: Starting udev Coldplug all Devices...
751[ 14.799063] systemd[1]: Mounted Huge Pages File System.
752[ 14.800188] systemd[1]: Mounted POSIX Message Queue File System.
753[ 14.805691] systemd[1]: Mounted Kernel Debug File System.
754[ 14.811137] systemd[1]: Mounted Temporary Directory (/tmp).
755[ 14.818505] systemd[1]: Started Create list of static device nodes for the current kernel.
756[ 14.842040] systemd[1]: Started Remount Root and Kernel File Systems.
757[ 14.888260] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
758[ 14.895728] systemd[1]: Starting Load/Save Random Seed...
759[ 14.896767] systemd[1]: Condition check resulted in Create System Users being skipped.
760[ 14.908447] systemd[1]: Starting Create Static Device Nodes in /dev...
761[ 14.913555] systemd[1]: Started Load Kernel Modules.
762[ 14.917257] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
763[ 14.928328] systemd[1]: Mounting Kernel Configuration File System...
764[ 14.934422] systemd[1]: Starting Apply Kernel Variables...
765[ 14.940295] systemd[1]: Mounted Kernel Configuration File System.
766[ 15.123989] systemd[1]: Started LVM2 metadata daemon.
767[ 15.298602] systemd[1]: Started udev Coldplug all Devices.
768[ 15.304078] systemd[1]: Started Apply Kernel Variables.
769[ 15.332134] systemd[1]: Started Load/Save Random Seed.
770[ 15.360934] systemd[1]: Started Create Static Device Nodes in /dev.
771[ 15.368158] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
772[ 15.377480] systemd[1]: Starting Journal Service...
773[ 15.383110] systemd[1]: Starting udev Kernel Device Manager...
774[ 16.033245] systemd[1]: Started Journal Service.
775[ 16.037844] audit: type=1130 audit(1576586649.376:2): pid=1 uid=0 auid=4294967295 ses=429496'
776[ 16.101599] systemd-journald[383]: Received client request to flush runtime journal.
777[ 16.123501] audit: type=1130 audit(1576586649.468:3): pid=1 uid=0 auid=4294967295 ses=429496'
778[ 16.159824] audit: type=1130 audit(1576586649.500:4): pid=1 uid=0 auid=4294967295 ses=429496'
779[ 16.585173] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input3
780[ 16.593559] input: adc-keys as /devices/platform/adc-keys/input/input4
781[ 16.771346] Registered IR keymap rc-khadas
782[ 16.814154] IR NEC protocol handler initialized
783[ 16.828452] mc: Linux media interface: v0.10
784[ 16.839486] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
785[ 16.841920] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input5
786[ 16.850509] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no tr
787[ 16.860982] meson-ir c8100580.ir: receiver initialized
788[ 17.005764] lima d00c0000.gpu: IRQ ppmmu3 not found
789[ 17.005806] lima d00c0000.gpu: IRQ ppmmu4 not found
790[ 17.009916] lima d00c0000.gpu: IRQ ppmmu5 not found
791[ 17.014742] lima d00c0000.gpu: IRQ ppmmu6 not found
792[ 17.019546] lima d00c0000.gpu: IRQ ppmmu7 not found
793[ 17.024462] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
794[ 17.030693] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
795[ 17.036968] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
796[ 17.043266] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
797[ 17.049684] lima d00c0000.gpu: IRQ pp3 not found
798[ 17.054071] lima d00c0000.gpu: IRQ pp4 not found
799[ 17.058714] lima d00c0000.gpu: IRQ pp5 not found
800[ 17.063210] lima d00c0000.gpu: IRQ pp6 not found
801[ 17.067762] lima d00c0000.gpu: IRQ pp7 not found
802[ 17.072450] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
803[ 17.080487] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
804[ 17.091040] lima d00c0000.gpu: bus rate = 166666667
805[ 17.094933] lima d00c0000.gpu: mod rate = 744000000
806[ 17.098835] [drm] Initialized lima 1.0.0 20190217 for d00c0000.gpu on minor 1
807[ 17.098872] videodev: Linux video capture interface: v2.00
808[ 17.173297] Bluetooth: Core ver 2.22
809[ 17.173338] Bluetooth: Starting self testing
810[ 17.191844] Bluetooth: ECDH test passed in 15925 usecs
811[ 17.194630] Bluetooth: SMP test passed in 2611 usecs
812[ 17.196376] Bluetooth: Finished self testing
813[ 17.200661] NET: Registered protocol family 31
814[ 17.204955] Bluetooth: HCI device and connection manager initialized
815[ 17.211261] Bluetooth: HCI socket layer initialized
816[ 17.216067] Bluetooth: L2CAP socket layer initialized
817[ 17.221107] Bluetooth: SCO socket layer initialized
818[ 17.311561] audit: type=1130 audit(1576586650.656:5): pid=1 uid=0 auid=4294967295 ses=429496'
819[ 17.404542] cfg80211: Loading compiled-in X.509 certificates for regulatory database
820[ 17.429610] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
821[ 17.437242] Bluetooth: HCI UART driver ver 2.3
822[ 17.437287] Bluetooth: HCI UART protocol H4 registered
823[ 17.441233] Bluetooth: HCI UART protocol BCSP registered
824[ 17.446604] Bluetooth: HCI UART protocol LL registered
825[ 17.447169] platform regulatory.0: Direct firmware load for regulatory.db failed with error 2
826[ 17.451543] Bluetooth: HCI UART protocol ATH3K registered
827[ 17.463394] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
828[ 17.465596] Bluetooth: HCI UART protocol Three-wire (H5) registered
829[ 17.485050] meson_vdec: module is from the staging directory, the quality is unknown, you ha.
830[ 17.486068] Bluetooth: HCI UART protocol Intel registered
831[ 17.495056] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
832[ 17.502854] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
833[ 17.511152] Bluetooth: HCI UART protocol Broadcom registered
834[ 17.518574] Bluetooth: HCI UART protocol QCA registered
835[ 17.521812] Bluetooth: HCI UART protocol AG6XX registered
836[ 17.527245] Bluetooth: HCI UART protocol Marvell registered
837[ 17.564109] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43431
838[ 17.567455] usbcore: registered new interface driver brcmfmac
839[ 17.577105] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin faile2
840[ 17.582619] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdin
841[ 17.849347] audit: type=1130 audit(1576586651.192:6): pid=1 uid=0 auid=4294967295 ses=429496'
842[ 17.876492] Bluetooth: hci0: BCM: chip id 94
843[ 17.877119] Bluetooth: hci0: BCM: features 0x2e
844[ 17.881736] Bluetooth: hci0: BCM43430A1
845[ 17.883589] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
846[ 17.889587] bluetooth hci0: Direct firmware load for brcm/BCM43430A1.hcd failed with error -2
847[ 17.897939] bluetooth hci0: Falling back to sysfs fallback for: brcm/BCM43430A1.hcd
848[ 19.943786] audit: type=1130 audit(1576586653.288:7): pid=1 uid=0 auid=4294967295 ses=429496'
849[ 20.012157] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Plea.
850[ 20.158673] audit: type=1130 audit(1576586653.500:8): pid=1 uid=0 auid=4294967295 ses=429496'
851[ 20.205463] audit: type=1127 audit(1576586653.548:9): pid=546 uid=0 auid=4294967295 ses=4294'
852[ 20.226044] audit: type=1130 audit(1576586653.568:10): pid=1 uid=0 auid=4294967295 ses=42949'
853[ 20.788578] audit: type=1130 audit(1576586654.132:11): pid=1 uid=0 auid=4294967295 ses=42949'
854[ 22.334772] kauditd_printk_skb: 3 callbacks suppressed
855[ 22.334780] audit: type=1130 audit(1576586655.676:15): pid=1 uid=0 auid=4294967295 ses=42949'
856[ 22.394673] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
857[ 22.394719] Bluetooth: BNEP filters: protocol multicast
858[ 22.399615] Bluetooth: BNEP socket layer initialized
859[ 22.961345] audit: type=1130 audit(1576586656.300:16): pid=1 uid=0 auid=4294967295 ses=42949'
860[ 22.988846] audit: type=1130 audit(1576586656.332:17): pid=1 uid=0 auid=4294967295 ses=42949'
861[ 23.041214] audit: type=1130 audit(1576586656.384:18): pid=1 uid=0 auid=4294967295 ses=42949'
862[ 23.056817] audit: type=1130 audit(1576586656.400:19): pid=1 uid=0 auid=4294967295 ses=42949'
863[ 23.076050] audit: type=1701 audit(1576586656.416:20): auid=4294967295 uid=0 gid=0 ses=429491
864[ 23.100659] audit: type=1130 audit(1576586656.444:21): pid=1 uid=0 auid=4294967295 ses=42949'
865[ 23.124768] audit: type=1130 audit(1576586656.464:22): pid=1 uid=0 auid=4294967295 ses=42949'
866[ 23.142947] audit: type=1130 audit(1576586656.484:23): pid=1 uid=0 auid=4294967295 ses=42949'
867[ 23.408810] audit: type=1130 audit(1576586656.752:24): pid=1 uid=0 auid=4294967295 ses=42949'
868[ 27.342831] kauditd_printk_skb: 9 callbacks suppressed
869[ 27.342838] audit: type=1131 audit(1576586660.684:34): pid=1 uid=0 auid=4294967295 ses=42949'
870[ 27.469779] audit: type=1130 audit(1576586660.812:35): pid=1 uid=0 auid=4294967295 ses=42949'
871[ 27.484004] audit: type=1131 audit(1576586660.812:36): pid=1 uid=0 auid=4294967295 ses=42949'
872[ 27.604465] audit: type=1130 audit(1576586660.948:37): pid=1 uid=0 auid=4294967295 ses=42949'
873
874[ 27.624021] audit: type=1701 audit(1576586660.968:38): auid=4294967295 uid=0 gid=0 ses=429491
875Manjaro Linux 5.5.0-02 (ttyAML0)
876
877Manjaro login: [ 27.669786] audit: type=1130 audit(1576586661.008:39): pid=1 uid=0 auid=42949'
878[ 27.723916] audit: type=1131 audit(1576586661.068:40): pid=1 uid=0 auid=4294967295 ses=42949'
879[ 28.338084] audit: type=1701 audit(1576586661.680:41): auid=4294967295 uid=0 gid=0 ses=429491
880[ 28.407747] audit: type=1130 audit(1576586661.748:42): pid=1 uid=0 auid=4294967295 ses=42949'
881[ 28.428872] audit: type=1131 audit(1576586661.768:43): pid=1 uid=0 auid=4294967295 ses=42949'
882[ 32.455051] kauditd_printk_skb: 35 callbacks suppressed
883[ 32.455059] audit: type=1131 audit(1576586665.796:79): pid=1 uid=0 auid=4294967295 ses=42949'
884[ 32.505363] audit: type=1131 audit(1576586665.848:80): pid=1 uid=0 auid=4294967295 ses=42949'
885[ 32.725636] audit: type=1130 audit(1576586666.068:81): pid=1 uid=0 auid=4294967295 ses=42949'
886[ 32.739858] audit: type=1131 audit(1576586666.068:82): pid=1 uid=0 auid=4294967295 ses=42949'
887[ 32.760195] audit: type=1130 audit(1576586666.080:83): pid=1 uid=0 auid=4294967295 ses=42949'
888[ 32.778166] audit: type=1131 audit(1576586666.084:84): pid=1 uid=0 auid=4294967295 ses=42949'
889[ 32.796988] audit: type=1130 audit(1576586666.100:85): pid=1 uid=0 auid=4294967295 ses=42949'
890[ 32.872292] audit: type=1130 audit(1576586666.216:86): pid=1 uid=0 auid=4294967295 ses=42949'
891[ 32.888954] audit: type=1701 audit(1576586666.232:87): auid=4294967295 uid=0 gid=0 ses=429491
892[ 32.934688] audit: type=1130 audit(1576586666.276:88): pid=1 uid=0 auid=4294967295 ses=42949'
893[ 37.464103] kauditd_printk_skb: 40 callbacks suppressed
894[ 37.464111] audit: type=1130 audit(1576586670.808:129): pid=1 uid=0 auid=4294967295 ses=4294'
895[ 37.491708] audit: type=1131 audit(1576586670.824:130): pid=1 uid=0 auid=4294967295 ses=4294'
896[ 37.505546] audit: type=1130 audit(1576586670.832:131): pid=1 uid=0 auid=4294967295 ses=4294'
897[ 37.644011] audit: type=1131 audit(1576586670.988:132): pid=1 uid=0 auid=4294967295 ses=4294'
898[ 37.683896] audit: type=1701 audit(1576586671.028:133): auid=4294967295 uid=0 gid=0 ses=42941
899[ 37.704403] audit: type=1131 audit(1576586671.048:134): pid=1 uid=0 auid=4294967295 ses=4294'
900[ 37.738341] audit: type=1130 audit(1576586671.080:135): pid=1 uid=0 auid=4294967295 ses=4294'
901[ 37.965085] audit: type=1130 audit(1576586671.308:136): pid=1 uid=0 auid=4294967295 ses=4294'
902[ 37.979677] audit: type=1131 audit(1576586671.308:137): pid=1 uid=0 auid=4294967295 ses=4294'
903[ 38.403968] audit: type=1131 audit(1576586671.748:138): pid=1 uid=0 auid=4294967295 ses=4294'
904[ 53.163672] kauditd_printk_skb: 18 callbacks suppressed
905[ 53.163679] audit: type=1131 audit(1576586686.508:157): pid=1 uid=0 auid=4294967295 ses=4294'
906[ 78.816759] Bluetooth: hci0: BCM: Patch brcm/BCM43430A1.hcd not found
907[ 78.818882] cfg80211: failed to load regulatory.db
908[ 78.854185] NET: Registered protocol family 38
909[ 79.836653] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
910
911Manjaro login:
912Manjaro login:
913Manjaro login:
914Manjaro login: spiker
915Password:
916[ 142.587559] audit: type=1100 audit(1576586775.932:158): pid=578 uid=0 auid=4294967295 ses=42'
917[ 142.655858] audit: type=1101 audit(1576586776.000:159): pid=578 uid=0 auid=4294967295 ses=42'
918[ 142.675354] audit: type=1103 audit(1576586776.016:160): pid=578 uid=0 auid=4294967295 ses=42'
919[ 142.700430] audit: type=1006 audit(1576586776.016:161): pid=578 uid=0 subj=kernel old-auid=41
920Welcome to Manjaro-ARM
921~~Website: https://manjaro.org
922~~Forum: https://forum.manjaro.org/c/manjaro-arm
923~~IRC: #manjaro-arm on irc.freenode.net
924~~Matrix: #manjaro-arm-public:matrix.org
925[ 142.801779] audit: type=1130 audit(1576586776.144:162): pid=1 uid=0 auid=4294967295 ses=4294'
926[ 142.845485] audit: type=1101 audit(1576586776.188:163): pid=901 uid=0 auid=4294967295 ses=42'
927[ 142.864817] audit: type=1006 audit(1576586776.188:164): pid=901 uid=0 subj=kernel old-auid=41
928[ 142.878410] audit: type=1105 audit(1576586776.192:165): pid=901 uid=0 auid=1000 ses=2 subj=k'
929[ 143.318187] audit: type=1130 audit(1576586776.660:166): pid=1 uid=0 auid=4294967295 ses=4294'
930[ 143.357633] audit: type=1105 audit(1576586776.700:167): pid=578 uid=0 auid=1000 ses=1 subj=k'
931Last login: Tue Dec 17 15:45:52 on tty2
932[spiker@Manjaro ~]$
933[spiker@Manjaro ~]$
934[spiker@Manjaro ~]$
935[spiker@Manjaro ~]$ ls
936Desktop Documents Downloads Music Pictures Public Templates Videos
937[spiker@Manjaro ~]$ uname -a
938Linux Manjaro 5.5.0-02 #1 SMP PREEMPT Fri Jan 10 19:49:36 +03 2020 aarch64 GNU/Linux
939[spiker@Manjaro ~]$ neofetch
940-bash: neofetch: command not found