· 8 years ago · Jun 27, 2018, 02:06 PM
1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 2.6.39.4-5.1-server (qateam@titan.mandriva.com) (gcc version 4.6.1 20110627 (Mandriva) (GCC) ) #1 SMP Wed Jan 4 15:15:54 UTC 2012
4[ 0.000000] Command line: BOOT_IMAGE=linux root=UUID=d981d23f-af52-4df7-981f-85ce5e7b5b9a nokmsboot logo.nologo quiet resume=UUID=2be1793c-75e3-4c86-9d9a-5ce06f7d3ba4 splash=silent vga=788
5[ 0.000000] BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
7[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
8[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
9[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
10[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
11[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
12[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
13[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
14[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
15[ 0.000000] NX (Execute Disable) protection: active
16[ 0.000000] DMI present.
17[ 0.000000] DMI: System manufacturer System Product Name/M4A89GTD-PRO/USB3, BIOS 2301 07/18/2011
18[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
19[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
20[ 0.000000] No AGP bridge found
21[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
22[ 0.000000] MTRR default type: uncachable
23[ 0.000000] MTRR fixed ranges enabled:
24[ 0.000000] 00000-9FFFF write-back
25[ 0.000000] A0000-EFFFF uncachable
26[ 0.000000] F0000-FFFFF write-protect
27[ 0.000000] MTRR variable ranges enabled:
28[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
29[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
30[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
31[ 0.000000] 3 disabled
32[ 0.000000] 4 disabled
33[ 0.000000] 5 disabled
34[ 0.000000] 6 disabled
35[ 0.000000] 7 disabled
36[ 0.000000] TOM2: 0000000130000000 aka 4864M
37[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
38[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
39[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
40[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
41[ 0.000000] initial memory mapped : 0 - 20000000
42[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
43[ 0.000000] Using GB pages for direct mapping
44[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
45[ 0.000000] 0000000000 - 00c0000000 page 1G
46[ 0.000000] 00c0000000 - 00cfe00000 page 2M
47[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
48[ 0.000000] kernel direct mapping tables up to cfe90000 @ cfe8d000-cfe90000
49[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
50[ 0.000000] 0100000000 - 0130000000 page 2M
51[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffe000-130000000
52[ 0.000000] RAMDISK: 361fc000 - 37ff0000
53[ 0.000000] ACPI: RSDP 00000000000fba90 00024 (v02 ACPIAM)
54[ 0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 071811 XSDT1208 20110718 MSFT 00000097)
55[ 0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 071811 FACP1208 20110718 MSFT 00000097)
56[ 0.000000] ACPI: DSDT 00000000cfe90450 0E793 (v01 A1608 A1608000 00000000 INTL 20060113)
57[ 0.000000] ACPI: FACS 00000000cfea8000 00040
58[ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 071811 APIC1208 20110718 MSFT 00000097)
59[ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 071811 OEMMCFG 20110718 MSFT 00000097)
60[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 071811 OEMB1208 20110718 MSFT 00000097)
61[ 0.000000] ACPI: SRAT 00000000cfe9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
62[ 0.000000] ACPI: HPET 00000000cfe9f9b0 00038 (v01 071811 OEMHPET 20110718 MSFT 00000097)
63[ 0.000000] ACPI: SSDT 00000000cfe9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
64[ 0.000000] ACPI: Local APIC address 0xfee00000
65[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
66[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
67[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
68[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
69[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
70[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
71[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
72[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
73[ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000
74[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
75[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000)
76[ 0.000000] NUMA: Using 63 for the hash shift.
77[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
78[ 0.000000] NODE_DATA [000000012fff9000 - 000000012fffdfff]
79[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
80[ 0.000000] Zone PFN ranges:
81[ 0.000000] DMA 0x00000010 -> 0x00001000
82[ 0.000000] DMA32 0x00001000 -> 0x00100000
83[ 0.000000] Normal 0x00100000 -> 0x00130000
84[ 0.000000] Movable zone start PFN for each node
85[ 0.000000] early_node_map[3] active PFN ranges
86[ 0.000000] 0: 0x00000010 -> 0x0000009f
87[ 0.000000] 0: 0x00000100 -> 0x000cfe90
88[ 0.000000] 0: 0x00100000 -> 0x00130000
89[ 0.000000] On node 0 totalpages: 1048095
90[ 0.000000] DMA zone: 56 pages used for memmap
91[ 0.000000] DMA zone: 5 pages reserved
92[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
93[ 0.000000] DMA32 zone: 14280 pages used for memmap
94[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
95[ 0.000000] Normal zone: 2688 pages used for memmap
96[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
97[ 0.000000] ACPI: PM-Timer IO Port: 0x808
98[ 0.000000] ACPI: Local APIC address 0xfee00000
99[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
100[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
101[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
102[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
103[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
104[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
105[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
106[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
107[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
108[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
109[ 0.000000] ACPI: IRQ0 used by override.
110[ 0.000000] ACPI: IRQ2 used by override.
111[ 0.000000] ACPI: IRQ9 used by override.
112[ 0.000000] Using ACPI (MADT) for SMP configuration information
113[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
114[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
115[ 0.000000] nr_irqs_gsi: 40
116[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
117[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
118[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
119[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
120[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
121[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
122[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000
123[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
124[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
125[ 0.000000] Booting paravirtualized kernel on bare hardware
126[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
127[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83840 r8192 d22656 u262144
128[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u262144 alloc=1*2097152
129[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
130[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031066
131[ 0.000000] Policy zone: Normal
132[ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=d981d23f-af52-4df7-981f-85ce5e7b5b9a nokmsboot logo.nologo quiet resume=UUID=2be1793c-75e3-4c86-9d9a-5ce06f7d3ba4 splash=silent vga=788
133[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
134[ 0.000000] Checking aperture...
135[ 0.000000] No AGP bridge found
136[ 0.000000] Node 0: aperture @ c0000000 size 32 MB
137[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
138[ 0.000000] Your BIOS doesn't leave a aperture memory hole
139[ 0.000000] Please enable the IOMMU option in the BIOS setup
140[ 0.000000] This costs you 64 MB of RAM
141[ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000
142[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000
143[ 0.000000] Memory: 3957148k/4980736k available (4458k kernel code, 788356k absent, 235232k reserved, 6457k data, 776k init)
144[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
145[ 0.000000] Hierarchical RCU implementation.
146[ 0.000000] RCU-based detection of stalled CPUs is disabled.
147[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
148[ 0.000000] Extended CMOS year: 2000
149[ 0.000000] Console: colour dummy device 80x25
150[ 0.000000] console [tty0] enabled
151[ 0.000000] hpet clockevent registered
152[ 0.000000] Fast TSC calibration using PIT
153[ 0.000000] Detected 2809.417 MHz processor.
154[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.83 BogoMIPS (lpj=28094170)
155[ 0.000006] pid_max: default: 32768 minimum: 301
156[ 0.000020] Security Framework initialized
157[ 0.000028] TOMOYO Linux initialized
158[ 0.000277] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
159[ 0.001274] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
160[ 0.010101] Mount-cache hash table entries: 256
161[ 0.010189] Initializing cgroup subsys ns
162[ 0.010191] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
163[ 0.010194] Initializing cgroup subsys cpuacct
164[ 0.010197] Initializing cgroup subsys devices
165[ 0.010198] Initializing cgroup subsys freezer
166[ 0.010200] Initializing cgroup subsys net_cls
167[ 0.010201] Initializing cgroup subsys perf_event
168[ 0.010220] tseg: 0000000000
169[ 0.010229] CPU: Physical Processor ID: 0
170[ 0.010230] CPU: Processor Core ID: 0
171[ 0.010232] mce: CPU supports 6 MCE banks
172[ 0.010239] using C1E aware idle routine
173[ 0.010769] ACPI: Checking initramfs for custom DSDT
174[ 0.367712] ACPI: Core revision 20110316
175[ 0.380007] ftrace: allocating 17538 entries in 69 pages
176[ 0.383537] Setting APIC routing to flat
177[ 0.383858] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
178[ 0.485033] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
179[ 0.490000] Performance Events: AMD PMU driver.
180[ 0.490000] ... version: 0
181[ 0.490000] ... bit width: 48
182[ 0.490000] ... generic registers: 4
183[ 0.490000] ... value mask: 0000ffffffffffff
184[ 0.490000] ... max period: 00007fffffffffff
185[ 0.490000] ... fixed-purpose events: 0
186[ 0.490000] ... event mask: 000000000000000f
187[ 0.490000] MCE: In-kernel MCE decoding enabled.
188[ 0.490000] NMI watchdog enabled, takes one hw-pmu counter.
189[ 0.490000] Booting Node 0, Processors #1
190[ 0.490000] smpboot cpu 1: start_ip = 9a000
191[ 0.650011] NMI watchdog enabled, takes one hw-pmu counter.
192[ 0.650025] System has AMD C1E enabled
193[ 0.650064] #2
194[ 0.650065] smpboot cpu 2: start_ip = 9a000
195[ 0.650075] Switch to broadcast mode on CPU1
196[ 0.820020] NMI watchdog enabled, takes one hw-pmu counter.
197[ 0.820035] Switch to broadcast mode on CPU2
198[ 0.820071] #3
199[ 0.820072] smpboot cpu 3: start_ip = 9a000
200[ 0.990038] NMI watchdog enabled, takes one hw-pmu counter.
201[ 0.990053] Switch to broadcast mode on CPU3
202[ 0.990096] #4
203[ 0.990097] smpboot cpu 4: start_ip = 9a000
204[ 1.160040] NMI watchdog enabled, takes one hw-pmu counter.
205[ 1.160055] Switch to broadcast mode on CPU4
206[ 1.160100] #5 Ok.
207[ 1.160101] smpboot cpu 5: start_ip = 9a000
208[ 1.330046] NMI watchdog enabled, takes one hw-pmu counter.
209[ 1.330064] Brought up 6 CPUs
210[ 1.330066] Total of 6 processors activated (33712.44 BogoMIPS).
211[ 1.330062] Switch to broadcast mode on CPU5
212[ 1.333686] Switch to broadcast mode on CPU0
213[ 1.333686] devtmpfs: initialized
214[ 1.333686] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
215[ 1.333686] Time: 23:56:04 Date: 02/22/12
216[ 1.333686] NET: Registered protocol family 16
217[ 1.333686] node 0 link 0: io port [1000, ffffff]
218[ 1.333686] TOM: 00000000d0000000 aka 3328M
219[ 1.333686] Fam 10h mmconf [e0000000, efffffff]
220[ 1.333686] node 0 link 0: mmio [a0000, bffff]
221[ 1.333686] node 0 link 0: mmio [d0000000, dfffffff]
222[ 1.333686] node 0 link 0: mmio [e0000000, efffffff] ==> none
223[ 1.333686] node 0 link 0: mmio [f0000000, ffdfffff]
224[ 1.333686] TOM2: 0000000130000000 aka 4864M
225[ 1.333686] bus: [00, 07] on node 0 link 0
226[ 1.333686] bus: 00 index 0 [io 0x0000-0xffff]
227[ 1.333686] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
228[ 1.333686] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
229[ 1.333686] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
230[ 1.333686] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
231[ 1.333686] Extended Config Space enabled on 1 nodes
232[ 1.333686] ACPI: bus type pci registered
233[ 1.333686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
234[ 1.333686] PCI: not using MMCONFIG
235[ 1.333686] PCI: Using configuration type 1 for base access
236[ 1.333686] PCI: Using configuration type 1 for extended access
237[ 1.333686] bio: create slab <bio-0> at 0
238[ 1.333686] ACPI: EC: Look up EC in DSDT
239[ 1.333686] ACPI: Executed 3 blocks of module-level executable AML code
240[ 1.700429] ACPI: Interpreter enabled
241[ 1.700433] ACPI: (supports S0 S1 S3 S4 S5)
242[ 1.700451] ACPI: Using IOAPIC for interrupt routing
243[ 1.700495] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
244[ 1.701505] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
245[ 1.871729] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
246[ 1.871821] ACPI: No dock devices found.
247[ 1.871822] HEST: Table not found.
248[ 1.871824] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
249[ 1.871986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
250[ 1.872101] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
251[ 1.872104] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
252[ 1.872106] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
253[ 1.872108] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
254[ 1.872110] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
255[ 1.872112] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
256[ 1.872124] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
257[ 1.872161] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
258[ 1.872183] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
259[ 1.872185] pci 0000:00:02.0: PME# disabled
260[ 1.872201] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
261[ 1.872223] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
262[ 1.872225] pci 0000:00:09.0: PME# disabled
263[ 1.872235] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
264[ 1.872256] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
265[ 1.872258] pci 0000:00:0a.0: PME# disabled
266[ 1.872280] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
267[ 1.872300] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
268[ 1.872307] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
269[ 1.872314] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
270[ 1.872321] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
271[ 1.872328] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
272[ 1.872335] pci 0000:00:11.0: reg 24: [mem 0xf5fffc00-0xf5ffffff]
273[ 1.872349] pci 0000:00:11.0: set SATA to AHCI mode
274[ 1.872381] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
275[ 1.872391] pci 0000:00:12.0: reg 10: [mem 0xf5ffe000-0xf5ffefff]
276[ 1.872441] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
277[ 1.872455] pci 0000:00:12.2: reg 10: [mem 0xf5fff800-0xf5fff8ff]
278[ 1.872504] pci 0000:00:12.2: supports D1 D2
279[ 1.872505] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
280[ 1.872508] pci 0000:00:12.2: PME# disabled
281[ 1.872523] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
282[ 1.872533] pci 0000:00:13.0: reg 10: [mem 0xf5ffd000-0xf5ffdfff]
283[ 1.872582] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
284[ 1.872595] pci 0000:00:13.2: reg 10: [mem 0xf5fff400-0xf5fff4ff]
285[ 1.872644] pci 0000:00:13.2: supports D1 D2
286[ 1.872646] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
287[ 1.872648] pci 0000:00:13.2: PME# disabled
288[ 1.872663] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
289[ 1.872713] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
290[ 1.872723] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
291[ 1.872730] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
292[ 1.872737] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
293[ 1.872744] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
294[ 1.872751] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
295[ 1.872776] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
296[ 1.872791] pci 0000:00:14.2: reg 10: [mem 0xf5ff8000-0xf5ffbfff 64bit]
297[ 1.872832] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
298[ 1.872835] pci 0000:00:14.2: PME# disabled
299[ 1.872844] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
300[ 1.872896] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
301[ 1.872925] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
302[ 1.872935] pci 0000:00:14.5: reg 10: [mem 0xf5ffc000-0xf5ffcfff]
303[ 1.872983] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
304[ 1.873022] pci 0000:00:15.0: supports D1 D2
305[ 1.873042] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
306[ 1.873052] pci 0000:00:16.0: reg 10: [mem 0xf5ff7000-0xf5ff7fff]
307[ 1.873101] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
308[ 1.873115] pci 0000:00:16.2: reg 10: [mem 0xf5fff000-0xf5fff0ff]
309[ 1.873164] pci 0000:00:16.2: supports D1 D2
310[ 1.873165] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
311[ 1.873168] pci 0000:00:16.2: PME# disabled
312[ 1.873181] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
313[ 1.873192] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
314[ 1.873202] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
315[ 1.873211] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
316[ 1.873223] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
317[ 1.873262] pci 0000:01:00.0: [10de:0de1] type 0 class 0x000300
318[ 1.873271] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
319[ 1.873280] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
320[ 1.873289] pci 0000:01:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
321[ 1.873296] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
322[ 1.873302] pci 0000:01:00.0: reg 30: [mem 0xf7d80000-0xf7dfffff pref]
323[ 1.873340] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
324[ 1.873348] pci 0000:01:00.1: reg 10: [mem 0xf7d7c000-0xf7d7ffff]
325[ 1.890027] pci 0000:00:02.0: PCI bridge to [bus 01-01]
326[ 1.890031] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
327[ 1.890034] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf7dfffff]
328[ 1.890037] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
329[ 1.890071] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
330[ 1.890085] pci 0000:02:00.0: reg 10: [mem 0xf7efe000-0xf7efffff 64bit]
331[ 1.890140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
332[ 1.890143] pci 0000:02:00.0: PME# disabled
333[ 1.910025] pci 0000:00:09.0: PCI bridge to [bus 02-02]
334[ 1.910029] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
335[ 1.910032] pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7efffff]
336[ 1.910035] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
337[ 1.910068] pci 0000:03:00.0: [197b:2361] type 0 class 0x000101
338[ 1.910133] pci 0000:03:00.0: reg 24: [mem 0xf7fffc00-0xf7fffdff]
339[ 1.910167] pci 0000:03:00.0: PME# supported from D3hot
340[ 1.910171] pci 0000:03:00.0: PME# disabled
341[ 1.910195] pci 0000:03:00.1: [197b:0368] type 0 class 0x000101
342[ 1.910209] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
343[ 1.910219] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
344[ 1.910230] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
345[ 1.910240] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
346[ 1.910250] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
347[ 1.930026] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
348[ 1.930030] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
349[ 1.930033] pci 0000:00:0a.0: bridge window [mem 0xf7f00000-0xf7ffffff]
350[ 1.930036] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
351[ 1.930066] pci 0000:04:06.0: [14f1:5b7a] type 0 class 0x000400
352[ 1.930086] pci 0000:04:06.0: reg 10: [mem 0xf8000000-0xfbffffff]
353[ 1.930176] pci 0000:04:07.0: [1106:3044] type 0 class 0x000c00
354[ 1.930195] pci 0000:04:07.0: reg 10: [mem 0xfe9fb800-0xfe9fbfff]
355[ 1.930205] pci 0000:04:07.0: reg 14: [io 0xdc00-0xdc7f]
356[ 1.930269] pci 0000:04:07.0: supports D2
357[ 1.930271] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
358[ 1.930275] pci 0000:04:07.0: PME# disabled
359[ 1.930311] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
360[ 1.930314] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
361[ 1.930318] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe9fffff]
362[ 1.930321] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
363[ 1.930324] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
364[ 1.930326] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
365[ 1.930328] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
366[ 1.930330] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
367[ 1.930332] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
368[ 1.930334] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
369[ 1.930387] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
370[ 1.930403] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
371[ 1.930428] pci 0000:05:00.0: reg 18: [mem 0xf4fff000-0xf4ffffff 64bit pref]
372[ 1.930444] pci 0000:05:00.0: reg 20: [mem 0xf4ff8000-0xf4ffbfff 64bit pref]
373[ 1.930492] pci 0000:05:00.0: supports D1 D2
374[ 1.930494] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
375[ 1.930497] pci 0000:05:00.0: PME# disabled
376[ 1.950028] pci 0000:00:15.0: PCI bridge to [bus 05-05]
377[ 1.950033] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
378[ 1.950036] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
379[ 1.950041] pci 0000:00:15.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
380[ 1.950057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
381[ 1.950192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
382[ 1.950217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
383[ 1.950234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
384[ 1.950264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
385[ 1.950303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
386[ 1.950424] pci0000:00: Requesting ACPI _OSC control (0x1d)
387[ 1.950551] pci0000:00: ACPI _OSC control (0x1d) granted
388[ 1.953758] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
389[ 1.953795] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
390[ 1.953832] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
391[ 1.953868] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
392[ 1.953896] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
393[ 1.953918] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
394[ 1.953939] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
395[ 1.953960] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
396[ 1.954014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
397[ 1.954018] vgaarb: loaded
398[ 1.954054] PCI: Using ACPI for IRQ routing
399[ 1.954054] PCI: pci_cache_line_size set to 64 bytes
400[ 1.954054] reserve RAM buffer: 000000000009f000 - 000000000009ffff
401[ 1.954054] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
402[ 1.954054] NetLabel: Initializing
403[ 1.954054] NetLabel: domain hash size = 128
404[ 1.954054] NetLabel: protocols = UNLABELED CIPSOv4
405[ 1.954054] NetLabel: unlabeled traffic allowed by default
406[ 1.954054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
407[ 1.954054] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
408[ 1.954054] Switching to clocksource hpet
409[ 1.954054] pnp: PnP ACPI init
410[ 1.954054] ACPI: bus type pnp registered
411[ 1.954054] pnp 00:00: [bus 00-ff]
412[ 1.954054] pnp 00:00: [io 0x0cf8-0x0cff]
413[ 1.954054] pnp 00:00: [io 0x0000-0x0cf7 window]
414[ 1.954054] pnp 00:00: [io 0x0d00-0xffff window]
415[ 1.954054] pnp 00:00: [mem 0x000a0000-0x000bffff window]
416[ 1.954054] pnp 00:00: [mem 0x000d0000-0x000dffff window]
417[ 1.954054] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
418[ 1.954054] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
419[ 1.954054] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
420[ 1.954054] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
421[ 1.954054] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
422[ 1.954054] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
423[ 1.954054] Switched to NOHz mode on CPU #5
424[ 1.954054] Switched to NOHz mode on CPU #2
425[ 1.954054] Switched to NOHz mode on CPU #0
426[ 1.954054] Switched to NOHz mode on CPU #1
427[ 1.954054] Switched to NOHz mode on CPU #4
428[ 1.954054] Switched to NOHz mode on CPU #3
429[ 2.230098] pnp 00:02: [dma 4]
430[ 2.230100] pnp 00:02: [io 0x0000-0x000f]
431[ 2.230102] pnp 00:02: [io 0x0081-0x0083]
432[ 2.230103] pnp 00:02: [io 0x0087]
433[ 2.230104] pnp 00:02: [io 0x0089-0x008b]
434[ 2.230106] pnp 00:02: [io 0x008f]
435[ 2.230107] pnp 00:02: [io 0x00c0-0x00df]
436[ 2.230138] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
437[ 2.230145] pnp 00:03: [io 0x0070-0x0071]
438[ 2.230162] pnp 00:03: [irq 8]
439[ 2.230182] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
440[ 2.230187] pnp 00:04: [io 0x0061]
441[ 2.230206] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
442[ 2.230212] pnp 00:05: [io 0x00f0-0x00ff]
443[ 2.230215] pnp 00:05: [irq 13]
444[ 2.230233] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
445[ 2.230588] pnp 00:06: [io 0x03f8-0x03ff]
446[ 2.230591] pnp 00:06: [irq 4]
447[ 2.230592] pnp 00:06: [dma 0 disabled]
448[ 2.230643] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
449[ 2.230665] pnp 00:07: [mem 0xfed00000-0xfed003ff]
450[ 2.230682] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
451[ 2.230725] pnp 00:08: [io 0x0060]
452[ 2.230726] pnp 00:08: [io 0x0064]
453[ 2.230728] pnp 00:08: [mem 0xfec00000-0xfec00fff]
454[ 2.230729] pnp 00:08: [mem 0xfee00000-0xfee00fff]
455[ 2.230762] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
456[ 2.230764] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
457[ 2.230766] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
458[ 2.230862] pnp 00:09: [io 0x0010-0x001f]
459[ 2.230863] pnp 00:09: [io 0x0022-0x003f]
460[ 2.230864] pnp 00:09: [io 0x0062-0x0063]
461[ 2.230865] pnp 00:09: [io 0x0065-0x006f]
462[ 2.230866] pnp 00:09: [io 0x0072-0x007f]
463[ 2.230867] pnp 00:09: [io 0x0080]
464[ 2.230868] pnp 00:09: [io 0x0084-0x0086]
465[ 2.230870] pnp 00:09: [io 0x0088]
466[ 2.230871] pnp 00:09: [io 0x008c-0x008e]
467[ 2.230872] pnp 00:09: [io 0x0090-0x009f]
468[ 2.230873] pnp 00:09: [io 0x00a2-0x00bf]
469[ 2.230874] pnp 00:09: [io 0x00b1]
470[ 2.230875] pnp 00:09: [io 0x00e0-0x00ef]
471[ 2.230876] pnp 00:09: [io 0x04d0-0x04d1]
472[ 2.230878] pnp 00:09: [io 0x040b]
473[ 2.230879] pnp 00:09: [io 0x04d6]
474[ 2.230880] pnp 00:09: [io 0x0c00-0x0c01]
475[ 2.230881] pnp 00:09: [io 0x0c14]
476[ 2.230882] pnp 00:09: [io 0x0c50-0x0c51]
477[ 2.230883] pnp 00:09: [io 0x0c52]
478[ 2.230884] pnp 00:09: [io 0x0c6c]
479[ 2.230885] pnp 00:09: [io 0x0c6f]
480[ 2.230886] pnp 00:09: [io 0x0cd0-0x0cd1]
481[ 2.230887] pnp 00:09: [io 0x0cd2-0x0cd3]
482[ 2.230889] pnp 00:09: [io 0x0cd4-0x0cd5]
483[ 2.230890] pnp 00:09: [io 0x0cd6-0x0cd7]
484[ 2.230891] pnp 00:09: [io 0x0cd8-0x0cdf]
485[ 2.230892] pnp 00:09: [io 0x0800-0x089f]
486[ 2.230893] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
487[ 2.230895] pnp 00:09: [io 0x0b00-0x0b1f]
488[ 2.230897] pnp 00:09: [io 0x0b20-0x0b3f]
489[ 2.230898] pnp 00:09: [io 0x0900-0x090f]
490[ 2.230899] pnp 00:09: [io 0x0910-0x091f]
491[ 2.230901] pnp 00:09: [io 0xfe00-0xfefe]
492[ 2.230902] pnp 00:09: [io 0x0060]
493[ 2.230903] pnp 00:09: [io 0x0064]
494[ 2.230904] pnp 00:09: [mem 0xcff00000-0xcfffffff]
495[ 2.230905] pnp 00:09: [mem 0xffb80000-0xffbfffff]
496[ 2.230907] pnp 00:09: [mem 0xfec10000-0xfec1001f]
497[ 2.230908] pnp 00:09: [mem 0xfed80000-0xfed80fff]
498[ 2.230909] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
499[ 2.230989] system 00:09: [io 0x04d0-0x04d1] has been reserved
500[ 2.230991] system 00:09: [io 0x040b] has been reserved
501[ 2.230994] system 00:09: [io 0x04d6] has been reserved
502[ 2.230996] system 00:09: [io 0x0c00-0x0c01] has been reserved
503[ 2.230998] system 00:09: [io 0x0c14] has been reserved
504[ 2.230999] system 00:09: [io 0x0c50-0x0c51] has been reserved
505[ 2.231001] system 00:09: [io 0x0c52] has been reserved
506[ 2.231002] system 00:09: [io 0x0c6c] has been reserved
507[ 2.231004] system 00:09: [io 0x0c6f] has been reserved
508[ 2.231006] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
509[ 2.231007] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
510[ 2.231009] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
511[ 2.231011] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
512[ 2.231013] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
513[ 2.231014] system 00:09: [io 0x0800-0x089f] has been reserved
514[ 2.231016] system 00:09: [io 0x0b00-0x0b1f] has been reserved
515[ 2.231018] system 00:09: [io 0x0b20-0x0b3f] has been reserved
516[ 2.231019] system 00:09: [io 0x0900-0x090f] has been reserved
517[ 2.231021] system 00:09: [io 0x0910-0x091f] has been reserved
518[ 2.231023] system 00:09: [io 0xfe00-0xfefe] has been reserved
519[ 2.231025] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
520[ 2.231027] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
521[ 2.231029] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
522[ 2.231031] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
523[ 2.231033] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
524[ 2.231135] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
525[ 2.231137] pnp 00:0a: [io 0x0230-0x023f]
526[ 2.231138] pnp 00:0a: [io 0x0290-0x029f]
527[ 2.231139] pnp 00:0a: [io 0x0f40-0x0f4f]
528[ 2.231140] pnp 00:0a: [io 0x0a30-0x0a3f]
529[ 2.231171] system 00:0a: [io 0x0230-0x023f] has been reserved
530[ 2.231172] system 00:0a: [io 0x0290-0x029f] has been reserved
531[ 2.231174] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
532[ 2.231176] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
533[ 2.231178] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
534[ 2.231196] pnp 00:0b: [mem 0xe0000000-0xefffffff]
535[ 2.231225] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
536[ 2.231227] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
537[ 2.231286] pnp 00:0c: [mem 0x00000000-0x0009ffff]
538[ 2.231288] pnp 00:0c: [mem 0x000c0000-0x000cffff]
539[ 2.231289] pnp 00:0c: [mem 0x000e0000-0x000fffff]
540[ 2.231290] pnp 00:0c: [mem 0x00100000-0xcfefffff]
541[ 2.231292] pnp 00:0c: [mem 0xfec00000-0xffffffff]
542[ 2.231323] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
543[ 2.231325] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
544[ 2.231327] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
545[ 2.231329] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
546[ 2.231330] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
547[ 2.231332] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
548[ 2.231388] pnp: PnP ACPI: found 13 devices
549[ 2.231389] ACPI: ACPI bus type pnp unregistered
550[ 2.236814] pci 0000:00:02.0: PCI bridge to [bus 01-01]
551[ 2.236816] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
552[ 2.236819] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf7dfffff]
553[ 2.236821] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
554[ 2.236824] pci 0000:00:09.0: PCI bridge to [bus 02-02]
555[ 2.236825] pci 0000:00:09.0: bridge window [io disabled]
556[ 2.236828] pci 0000:00:09.0: bridge window [mem 0xf7e00000-0xf7efffff]
557[ 2.236830] pci 0000:00:09.0: bridge window [mem pref disabled]
558[ 2.236833] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
559[ 2.236834] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
560[ 2.236837] pci 0000:00:0a.0: bridge window [mem 0xf7f00000-0xf7ffffff]
561[ 2.236839] pci 0000:00:0a.0: bridge window [mem pref disabled]
562[ 2.236841] pci 0000:00:14.4: PCI bridge to [bus 04-04]
563[ 2.236844] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
564[ 2.236847] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe9fffff]
565[ 2.236850] pci 0000:00:14.4: bridge window [mem pref disabled]
566[ 2.236855] pci 0000:00:15.0: PCI bridge to [bus 05-05]
567[ 2.236857] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
568[ 2.236860] pci 0000:00:15.0: bridge window [mem disabled]
569[ 2.236862] pci 0000:00:15.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
570[ 2.236874] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
571[ 2.236877] pci 0000:00:02.0: setting latency timer to 64
572[ 2.236883] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
573[ 2.236885] pci 0000:00:09.0: setting latency timer to 64
574[ 2.236888] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
575[ 2.236891] pci 0000:00:0a.0: setting latency timer to 64
576[ 2.236900] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
577[ 2.236902] pci 0000:00:15.0: setting latency timer to 64
578[ 2.236905] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
579[ 2.236906] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
580[ 2.236908] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
581[ 2.236910] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
582[ 2.236911] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
583[ 2.236913] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
584[ 2.236915] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
585[ 2.236916] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7dfffff]
586[ 2.236918] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
587[ 2.236920] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
588[ 2.236921] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
589[ 2.236923] pci_bus 0000:03: resource 1 [mem 0xf7f00000-0xf7ffffff]
590[ 2.236925] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
591[ 2.236926] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfe9fffff]
592[ 2.236928] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
593[ 2.236929] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
594[ 2.236931] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
595[ 2.236932] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
596[ 2.236934] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff]
597[ 2.236936] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
598[ 2.236937] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
599[ 2.236939] pci_bus 0000:05: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref]
600[ 2.236961] NET: Registered protocol family 2
601[ 2.237057] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
602[ 2.237822] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
603[ 2.239629] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
604[ 2.239854] TCP: Hash tables configured (established 524288 bind 65536)
605[ 2.239856] TCP reno registered
606[ 2.239863] UDP hash table entries: 2048 (order: 4, 65536 bytes)
607[ 2.239885] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
608[ 2.239976] NET: Registered protocol family 1
609[ 3.090206] pci 0000:01:00.0: Boot video device
610[ 3.090251] PCI: CLS 64 bytes, default 64
611[ 3.090286] Trying to unpack rootfs image as initramfs...
612[ 3.496185] Freeing initrd memory: 30672k freed
613[ 3.504474] PCI-DMA: Disabling AGP.
614[ 3.504602] PCI-DMA: aperture base @ c0000000 size 65536 KB
615[ 3.504603] PCI-DMA: using GART IOMMU.
616[ 3.504606] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
617[ 3.507480] kvm: no hardware support
618[ 3.507562] kvm: Nested Virtualization enabled
619[ 3.507565] kvm: Nested Paging enabled
620[ 3.508156] microcode: CPU0: patch_level=0x010000bf
621[ 3.508199] microcode: CPU1: patch_level=0x010000bf
622[ 3.508216] microcode: CPU2: patch_level=0x010000bf
623[ 3.508234] microcode: CPU3: patch_level=0x010000bf
624[ 3.508249] microcode: CPU4: patch_level=0x010000bf
625[ 3.508261] microcode: CPU5: patch_level=0x010000bf
626[ 3.508275] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
627[ 3.508339] audit: initializing netlink socket (disabled)
628[ 3.508347] type=2000 audit(1329954965.500:1): initialized
629[ 3.519724] HugeTLB registered 2 MB page size, pre-allocated 0 pages
630[ 3.521355] VFS: Disk quotas dquot_6.5.2
631[ 3.521390] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
632[ 3.521487] msgmni has been set to 7917
633[ 3.521714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
634[ 3.521716] io scheduler noop registered
635[ 3.521718] io scheduler deadline registered (default)
636[ 3.521737] io scheduler cfq registered
637[ 3.521895] pcieport 0000:00:02.0: setting latency timer to 64
638[ 3.521917] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
639[ 3.522026] pcieport 0000:00:09.0: setting latency timer to 64
640[ 3.522045] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
641[ 3.522143] pcieport 0000:00:0a.0: setting latency timer to 64
642[ 3.522159] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
643[ 3.522261] pcieport 0000:00:15.0: setting latency timer to 64
644[ 3.522292] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
645[ 3.522370] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
646[ 3.522373] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
647[ 3.522375] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
648[ 3.522377] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
649[ 3.522385] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
650[ 3.522387] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
651[ 3.522389] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
652[ 3.522397] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
653[ 3.522398] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
654[ 3.522400] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
655[ 3.522402] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
656[ 3.522447] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
657[ 3.522448] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
658[ 3.522451] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
659[ 3.522490] vesafb: mode is 800x600x16, linelength=1600, pages=2
660[ 3.522491] vesafb: scrolling: redraw
661[ 3.522493] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
662[ 3.522632] vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90011100000, using 1875k, total 14336k
663[ 3.525694] Console: switching to colour frame buffer device 100x37
664[ 3.528688] fb0: VESA VGA frame buffer device
665[ 3.528742] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
666[ 3.528746] ACPI: Power Button [PWRB]
667[ 3.528769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
668[ 3.528771] ACPI: Power Button [PWRF]
669[ 3.528851] ACPI: acpi_idle registered with cpuidle
670[ 3.528899] ACPI: processor limited to max C-state 1
671[ 3.820734] ERST: Table is not found!
672[ 3.820785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
673[ 3.841386] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
674[ 4.480796] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
675[ 4.510133] Refined TSC clocksource calibration: 2809.341 MHz.
676[ 4.510137] Switching to clocksource tsc
677[ 4.620289] Linux agpgart interface v0.103
678[ 4.620914] brd: module loaded
679[ 4.620973] i8042: PNP: No PS/2 controller found. Probing ports directly.
680[ 4.621479] serio: i8042 KBD port at 0x60,0x64 irq 1
681[ 4.621490] serio: i8042 AUX port at 0x60,0x64 irq 12
682[ 4.621550] mousedev: PS/2 mouse device common for all mice
683[ 4.621677] rtc_cmos 00:03: RTC can wake from S4
684[ 4.710190] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
685[ 4.710209] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
686[ 4.710218] cpuidle: using governor ladder
687[ 4.710220] cpuidle: using governor menu
688[ 4.710367] TCP cubic registered
689[ 4.710369] Registering the dns_resolver key type
690[ 4.710416] PM: Checking hibernation image partition UUID=2be1793c-75e3-4c86-9d9a-5ce06f7d3ba4
691[ 4.803578] PM: Hibernation image not present or could not be loaded.
692[ 4.803589] registered taskstats version 1
693[ 4.804059] Magic number: 0:959:959
694[ 4.804154] rtc_cmos 00:03: setting system clock to 2012-02-22 23:56:07 UTC (1329954967)
695[ 4.804156] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
696[ 4.805145] Freeing unused kernel memory: 776k freed
697[ 4.805277] Write protecting the kernel read-only data: 10240k
698[ 4.809255] Freeing unused kernel memory: 1664k freed
699[ 4.814289] Freeing unused kernel memory: 2008k freed
700[ 4.831602] dracut: dracut-010-6
701[ 4.849542] device-mapper: uevent: version 1.0.3
702[ 4.849597] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
703[ 4.851448] loop: module loaded
704[ 4.853789] udevd[163]: starting version 168
705[ 6.071241] dracut: Starting plymouth daemon
706[ 6.424280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
707[ 6.424368] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
708[ 6.424417] r8169 0000:05:00.0: setting latency timer to 64
709[ 6.424423] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
710[ 6.424472] r8169 0000:05:00.0: irq 44 for MSI/MSI-X
711[ 6.424721] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc9000063c000, bc:ae:c5:59:21:ee, XID 0c200000 IRQ 44
712[ 6.425094] SCSI subsystem initialized
713[ 6.429941] usbcore: registered new interface driver usbfs
714[ 6.429961] usbcore: registered new interface driver hub
715[ 6.430039] usbcore: registered new device driver usb
716[ 6.431864] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
717[ 6.431976] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
718[ 6.432008] ohci_hcd 0000:00:12.0: OHCI Host Controller
719[ 6.432037] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
720[ 6.433104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
721[ 6.433106] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
722[ 6.444247] libata version 3.00 loaded.
723[ 6.448172] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
724[ 6.448191] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
725[ 6.448216] pata_jmicron 0000:03:00.1: setting latency timer to 64
726[ 6.448415] scsi0 : pata_jmicron
727[ 6.448483] scsi1 : pata_jmicron
728[ 6.448751] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
729[ 6.448754] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
730[ 6.480250] QUIRK: Enable AMD PLL fix
731[ 6.480270] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf5ffe000
732[ 6.544161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
733[ 6.544163] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
734[ 6.544165] usb usb1: Product: OHCI Host Controller
735[ 6.544166] usb usb1: Manufacturer: Linux 2.6.39.4-5.1-server ohci_hcd
736[ 6.544168] usb usb1: SerialNumber: 0000:00:12.0
737[ 6.544245] hub 1-0:1.0: USB hub found
738[ 6.544283] hub 1-0:1.0: 5 ports detected
739[ 6.544415] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
740[ 6.544445] ohci_hcd 0000:00:13.0: OHCI Host Controller
741[ 6.544453] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
742[ 6.600151] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf5ffd000
743[ 6.640719] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
744[ 6.640723] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL01, max UDMA/66
745[ 6.664148] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
746[ 6.664150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
747[ 6.664152] usb usb2: Product: OHCI Host Controller
748[ 6.664153] usb usb2: Manufacturer: Linux 2.6.39.4-5.1-server ohci_hcd
749[ 6.664154] usb usb2: SerialNumber: 0000:00:13.0
750[ 6.664222] hub 2-0:1.0: USB hub found
751[ 6.664226] hub 2-0:1.0: 5 ports detected
752[ 6.664357] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
753[ 6.664369] ohci_hcd 0000:00:14.5: OHCI Host Controller
754[ 6.664376] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 3
755[ 6.680685] ata1.00: configured for UDMA/66
756[ 6.720603] ata1.01: configured for UDMA/66
757[ 6.730148] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
758[ 6.734501] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL01 PQ: 0 ANSI: 5
759[ 6.770059] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf5ffc000
760[ 6.834147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
761[ 6.834149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
762[ 6.834151] usb usb3: Product: OHCI Host Controller
763[ 6.834152] usb usb3: Manufacturer: Linux 2.6.39.4-5.1-server ohci_hcd
764[ 6.834154] usb usb3: SerialNumber: 0000:00:14.5
765[ 6.834221] hub 3-0:1.0: USB hub found
766[ 6.834226] hub 3-0:1.0: 2 ports detected
767[ 6.834348] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
768[ 6.834361] ohci_hcd 0000:00:16.0: OHCI Host Controller
769[ 6.834367] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 4
770[ 6.901477] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf5ff7000
771[ 6.940147] usb 1-1: new full speed USB device number 2 using ohci_hcd
772[ 6.964150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
773[ 6.964152] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
774[ 6.964153] usb usb4: Product: OHCI Host Controller
775[ 6.964155] usb usb4: Manufacturer: Linux 2.6.39.4-5.1-server ohci_hcd
776[ 6.964156] usb usb4: SerialNumber: 0000:00:16.0
777[ 6.964222] hub 4-0:1.0: USB hub found
778[ 6.964227] hub 4-0:1.0: 4 ports detected
779[ 6.964477] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
780[ 6.964499] ehci_hcd 0000:00:12.2: EHCI Host Controller
781[ 6.964506] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
782[ 7.070153] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
783[ 7.070173] ehci_hcd 0000:00:12.2: debug port 1
784[ 7.070191] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf5fff800
785[ 7.160145] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
786[ 7.160160] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
787[ 7.160162] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
788[ 7.160164] usb usb5: Product: EHCI Host Controller
789[ 7.160165] usb usb5: Manufacturer: Linux 2.6.39.4-5.1-server ehci_hcd
790[ 7.160167] usb usb5: SerialNumber: 0000:00:12.2
791[ 7.160239] hub 5-0:1.0: USB hub found
792[ 7.160242] hub 5-0:1.0: 5 ports detected
793[ 7.160340] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
794[ 7.160353] ehci_hcd 0000:00:13.2: EHCI Host Controller
795[ 7.160360] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
796[ 7.220141] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
797[ 7.220160] ehci_hcd 0000:00:13.2: debug port 1
798[ 7.220170] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf5fff400
799[ 7.240130] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
800[ 7.240144] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
801[ 7.240146] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
802[ 7.240147] usb usb6: Product: EHCI Host Controller
803[ 7.240149] usb usb6: Manufacturer: Linux 2.6.39.4-5.1-server ehci_hcd
804[ 7.240150] usb usb6: SerialNumber: 0000:00:13.2
805[ 7.240217] hub 6-0:1.0: USB hub found
806[ 7.240219] hub 6-0:1.0: 5 ports detected
807[ 7.240337] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
808[ 7.240349] ehci_hcd 0000:00:16.2: EHCI Host Controller
809[ 7.240355] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
810[ 7.300138] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
811[ 7.300157] ehci_hcd 0000:00:16.2: debug port 1
812[ 7.300168] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf5fff000
813[ 7.320126] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
814[ 7.320139] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
815[ 7.320140] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
816[ 7.320142] usb usb7: Product: EHCI Host Controller
817[ 7.320143] usb usb7: Manufacturer: Linux 2.6.39.4-5.1-server ehci_hcd
818[ 7.320145] usb usb7: SerialNumber: 0000:00:16.2
819[ 7.320220] hub 7-0:1.0: USB hub found
820[ 7.320223] hub 7-0:1.0: 4 ports detected
821[ 7.320362] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
822[ 7.320384] pata_atiixp 0000:00:14.1: setting latency timer to 64
823[ 7.320574] scsi2 : pata_atiixp
824[ 7.320652] scsi3 : pata_atiixp
825[ 7.320728] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
826[ 7.320730] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
827[ 7.321422] ahci 0000:00:11.0: version 3.0
828[ 7.321450] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
829[ 7.321500] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
830[ 7.321563] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
831[ 7.321566] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
832[ 7.321983] scsi4 : ahci
833[ 7.322031] scsi5 : ahci
834[ 7.322075] scsi6 : ahci
835[ 7.322120] scsi7 : ahci
836[ 7.322196] ata5: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffd00 irq 45
837[ 7.322199] ata6: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffd80 irq 45
838[ 7.322202] ata7: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffe00 irq 45
839[ 7.322204] ata8: SATA max UDMA/133 abar m1024@0xf5fffc00 port 0xf5fffe80 irq 45
840[ 7.322296] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
841[ 7.322316] ahci 0000:03:00.0: JMB361 has only one port
842[ 7.322354] ahci 0000:03:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
843[ 7.322357] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
844[ 7.322361] ahci 0000:03:00.0: setting latency timer to 64
845[ 7.322477] scsi8 : ahci
846[ 7.322517] ata9: SATA max UDMA/133 abar m512@0xf7fffc00 port 0xf7fffd00 irq 18
847[ 7.571526] usb 1-1: device not accepting address 2, error -62
848[ 7.630142] hub 1-0:1.0: unable to enumerate USB device on port 1
849[ 7.670156] ata5: SATA link down (SStatus 0 SControl 300)
850[ 7.670164] ata9: SATA link down (SStatus 0 SControl 300)
851[ 7.670188] ata6: SATA link down (SStatus 0 SControl 300)
852[ 7.670213] ata7: SATA link down (SStatus 0 SControl 300)
853[ 7.930134] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
854[ 7.931448] ata8.00: ATA-8: WDC WD10EAVS-00M4B0, 01.00A01, max UDMA/133
855[ 7.931451] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
856[ 7.933064] ata8.00: configured for UDMA/133
857[ 7.933191] scsi 7:0:0:0: Direct-Access ATA WDC WD10EAVS-00M 01.0 PQ: 0 ANSI: 5
858[ 7.940641] sd 7:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
859[ 7.940732] sd 7:0:0:0: [sda] Write Protect is off
860[ 7.940735] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
861[ 7.940773] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
862[ 7.943208] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
863[ 7.943210] cdrom: Uniform CD-ROM driver Revision: 3.20
864[ 7.943288] sr 0:0:0:0: Attached scsi CD-ROM sr0
865[ 7.950923] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
866[ 7.951002] sr 0:0:1:0: Attached scsi CD-ROM sr1
867[ 8.449681] sda: sda1 sda2 < sda5 >
868[ 8.449959] sd 7:0:0:0: [sda] Attached SCSI disk
869[ 9.030196] usb 5-1: new high speed USB device number 2 using ehci_hcd
870[ 9.181426] usb 5-1: New USB device found, idVendor=152d, idProduct=2329
871[ 9.181428] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
872[ 9.181430] usb 5-1: Product: USB to ATA/ATAPI bridge
873[ 9.181431] usb 5-1: Manufacturer: JMicron
874[ 9.181432] usb 5-1: SerialNumber: DCAA8515577F
875[ 9.186223] Initializing USB Mass Storage driver...
876[ 9.186321] usb-storage 5-1:1.0: Quirks match for vid 152d pid 2329: 8020
877[ 9.186343] scsi9 : usb-storage 5-1:1.0
878[ 9.186413] usbcore: registered new interface driver usb-storage
879[ 9.186415] USB Mass Storage support registered.
880[ 9.187540] usbcore: registered new interface driver uas
881[ 9.300141] usb 5-2: new high speed USB device number 3 using ehci_hcd
882[ 9.451514] usb 5-2: New USB device found, idVendor=152d, idProduct=2329
883[ 9.451516] usb 5-2: New USB device strings: Mfr=10, Product=11, SerialNumber=5
884[ 9.451517] usb 5-2: Product: GoodMan USB Storage
885[ 9.451519] usb 5-2: Manufacturer: GoodMan Corporation
886[ 9.451520] usb 5-2: SerialNumber: DCA40300568F
887[ 9.451951] scsi10 : usb-storage 5-2:1.0
888[ 9.630135] usb 5-4: new high speed USB device number 5 using ehci_hcd
889[ 9.780972] usb 5-4: New USB device found, idVendor=04b4, idProduct=6560
890[ 9.780974] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
891[ 9.781112] hub 5-4:1.0: USB hub found
892[ 9.781232] hub 5-4:1.0: 4 ports detected
893[ 9.900073] usb 5-5: new high speed USB device number 6 using ehci_hcd
894[ 9.925943] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
895[ 9.925947] PM: Marking nosave pages: 00000000cfe90000 - 0000000100000000
896[ 9.926447] PM: Marking nosave pages: 00000000c0000000 - 00000000c4000000
897[ 9.926626] PM: Basic memory bitmaps created
898[ 9.939307] PM: Basic memory bitmaps freed
899[ 9.942708] PM: Starting manual resume from disk
900[ 9.942711] PM: Hibernation image partition 8:5 present
901[ 9.942712] PM: Looking for hibernation image.
902[ 9.942876] PM: Image not found (code -22)
903[ 9.942878] PM: Hibernation image not present or could not be loaded.
904[ 9.979822] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
905[ 9.979825] EXT4-fs (sda1): write access will be enabled during recovery
906[ 10.052605] usb 5-5: New USB device found, idVendor=058f, idProduct=6362
907[ 10.052608] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
908[ 10.052610] usb 5-5: Product: Mass Storage Device
909[ 10.052611] usb 5-5: Manufacturer: Generic
910[ 10.052612] usb 5-5: SerialNumber: 058F312D81B1
911[ 10.052930] scsi11 : usb-storage 5-5:1.0
912[ 10.180578] scsi 9:0:0:0: Direct-Access WDC WD20 EARX-00PASB0 PQ: 0 ANSI: 2 CCS
913[ 10.180951] scsi: killing requests for dead queue
914[ 10.181311] sd 9:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
915[ 10.182057] sd 9:0:0:0: [sdb] Write Protect is off
916[ 10.182060] sd 9:0:0:0: [sdb] Mode Sense: 28 00 00 00
917[ 10.182062] sd 9:0:0:0: [sdb] Assuming drive cache: write through
918[ 10.183437] sd 9:0:0:0: [sdb] Assuming drive cache: write through
919[ 10.183940] sdb: sdb1
920[ 10.186081] sd 9:0:0:0: [sdb] Assuming drive cache: write through
921[ 10.186085] sd 9:0:0:0: [sdb] Attached SCSI disk
922[ 10.560799] EXT4-fs (sda1): recovery complete
923[ 10.561286] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
924[ 10.680081] usb 1-3: new low speed USB device number 4 using ohci_hcd
925[ 10.721177] dracut: Checking filesystems
926[ 10.721195] dracut: fsck -T -t noopts=_netdev -A -a
927[ 10.871120] usb 1-3: New USB device found, idVendor=093a, idProduct=2510
928[ 10.871123] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
929[ 10.871125] usb 1-3: Product: USB OPTICAL MOUSE
930[ 10.871127] usb 1-3: Manufacturer: PIXART
931[ 10.885225] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/input/input2
932[ 10.885268] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
933[ 10.885280] usbcore: registered new interface driver usbhid
934[ 10.885281] usbhid: USB HID core driver
935[ 10.950199] usb 5-4.1: new low speed USB device number 7 using ehci_hcd
936[ 11.050704] scsi 11:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
937[ 11.051946] scsi 11:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
938[ 11.053829] scsi 11:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
939[ 11.054445] sd 11:0:0:0: [sdc] Attached SCSI removable disk
940[ 11.056198] scsi 11:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
941[ 11.056822] sd 11:0:0:1: [sdd] Attached SCSI removable disk
942[ 11.064194] usb 5-4.1: New USB device found, idVendor=06a3, idProduct=0109
943[ 11.064196] usb 5-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
944[ 11.064198] usb 5-4.1: Product: P880
945[ 11.064199] usb 5-4.1: Manufacturer: SAITEK
946[ 11.070759] input: SAITEK P880 as /devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4.1/5-4.1:1.0/input/input3
947[ 11.070789] generic-usb 0003:06A3:0109.0002: input,hidraw1: USB HID v1.00 Joystick [SAITEK P880] on usb-0000:00:12.2-4.1/input0
948[ 11.150172] usb 5-4.3: new high speed USB device number 8 using ehci_hcd
949[ 11.223310] dracut: /dev/sda1: clean, 317458/60497920 files, 6593770/241983070 blocks
950[ 11.223431] dracut: Remounting /dev/disk/by-uuid/d981d23f-af52-4df7-981f-85ce5e7b5b9a with -o ro,
951[ 11.282528] usb 5-4.3: New USB device found, idVendor=067b, idProduct=2506
952[ 11.282530] usb 5-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
953[ 11.282532] usb 5-4.3: Product: Mass Storage Device
954[ 11.282533] usb 5-4.3: Manufacturer: Prolific Technology Inc.
955[ 11.282534] usb 5-4.3: SerialNumber: 000000000000
956[ 11.282911] scsi12 : usb-storage 5-4.3:1.0
957[ 11.363672] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
958[ 11.384997] dracut: Mounted root filesystem /dev/sda1
959[ 11.442641] sd 11:0:0:3: [sdf] 1951744 512-byte logical blocks: (999 MB/953 MiB)
960[ 11.443388] sd 11:0:0:3: [sdf] Write Protect is off
961[ 11.443391] sd 11:0:0:3: [sdf] Mode Sense: 03 00 00 00
962[ 11.443393] sd 11:0:0:3: [sdf] Assuming drive cache: write through
963[ 11.446145] sd 11:0:0:2: [sde] Attached SCSI removable disk
964[ 11.446160] scsi: killing requests for dead queue
965[ 11.448152] sd 11:0:0:3: [sdf] Assuming drive cache: write through
966[ 11.451151] sdf: sdf1
967[ 11.454151] sd 11:0:0:3: [sdf] Assuming drive cache: write through
968[ 11.454154] sd 11:0:0:3: [sdf] Attached SCSI removable disk
969[ 11.650080] usb 2-1: new low speed USB device number 2 using ohci_hcd
970[ 11.877116] usb 2-1: New USB device found, idVendor=046d, idProduct=c309
971[ 11.877119] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
972[ 11.877121] usb 2-1: Product: Logitech USB Keyboard
973[ 11.877123] usb 2-1: Manufacturer: Logitech
974[ 11.960126] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input4
975[ 11.960163] generic-usb 0003:046D:C309.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input0
976[ 11.973169] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input5
977[ 11.973217] generic-usb 0003:046D:C309.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input1
978[ 12.280918] scsi 12:0:0:0: Direct-Access ST340062 0A 3.AA PQ: 0 ANSI: 0
979[ 12.281784] sd 12:0:0:0: [sdg] 781422768 512-byte logical blocks: (400 GB/372 GiB)
980[ 12.282533] sd 12:0:0:0: [sdg] Write Protect is off
981[ 12.282536] sd 12:0:0:0: [sdg] Mode Sense: 03 00 00 00
982[ 12.282538] sd 12:0:0:0: [sdg] Assuming drive cache: write through
983[ 12.282624] scsi: killing requests for dead queue
984[ 12.284302] sd 12:0:0:0: [sdg] Assuming drive cache: write through
985[ 12.289035] sdg: sdg1
986[ 12.291164] sd 12:0:0:0: [sdg] Assuming drive cache: write through
987[ 12.291167] sd 12:0:0:0: [sdg] Attached SCSI disk
988[ 12.304248] usb 4-1: new full speed USB device number 2 using ohci_hcd
989[ 12.486501] scsi 10:0:0:0: Direct-Access WDC WD10 EACS-00D6B0 PQ: 0 ANSI: 2 CCS
990[ 12.490156] usb 4-1: New USB device found, idVendor=067b, idProduct=2303
991[ 12.490158] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
992[ 12.490160] usb 4-1: Product: USB-Serial Controller D
993[ 12.490162] usb 4-1: Manufacturer: Prolific Technology Inc.
994[ 12.820063] usb 4-3: new full speed USB device number 3 using ohci_hcd
995[ 13.005174] usb 4-3: New USB device found, idVendor=046d, idProduct=08d7
996[ 13.005176] usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
997[ 14.575712] dracut: Switching root
998[ 14.639932] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
999[ 15.193542] sd 10:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
1000[ 15.194277] sd 10:0:0:0: [sdh] Write Protect is off
1001[ 15.194280] sd 10:0:0:0: [sdh] Mode Sense: 34 00 00 00
1002[ 15.194281] sd 10:0:0:0: [sdh] Assuming drive cache: write through
1003[ 15.195897] sd 10:0:0:0: [sdh] Assuming drive cache: write through
1004[ 15.212397] sdh: sdh1
1005[ 15.214142] sd 10:0:0:0: [sdh] Assuming drive cache: write through
1006[ 15.214144] sd 10:0:0:0: [sdh] Attached SCSI disk
1007[ 15.468954] systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
1008[ 15.751295] NET: Registered protocol family 10
1009[ 15.762558] systemd[1]: Set hostname to <localhost.localdomain>.
1010[ 15.783101] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
1011[ 16.021192] systemd[1]: [/etc/rc.d/init.d/ip6tables:19] Failed to add LSB Provides name firewall.service, ignoring: File exists
1012[ 17.818219] EXT4-fs (sda1): re-mounted. Opts: (null)
1013[ 20.242577] udevd[925]: starting version 168
1014[ 20.670202] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:73
1015[ 20.670214] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:76
1016[ 20.670223] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:77
1017[ 20.670231] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:78
1018[ 20.670240] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:79
1019[ 20.670248] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:80
1020[ 20.670256] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:81
1021[ 20.670264] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:82
1022[ 20.670273] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:83
1023[ 20.670284] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:84
1024[ 20.670294] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:85
1025[ 20.670303] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:86
1026[ 20.670313] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:87
1027[ 20.670321] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:88
1028[ 20.670334] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:89
1029[ 20.670342] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:90
1030[ 20.670350] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:91
1031[ 20.670358] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:92
1032[ 20.670366] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:93
1033[ 20.670374] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:94
1034[ 20.670381] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:95
1035[ 20.670389] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:96
1036[ 20.670397] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:97
1037[ 20.670405] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:98
1038[ 20.670413] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:99
1039[ 20.670421] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:100
1040[ 20.670430] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:101
1041[ 20.670438] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:105
1042[ 20.670446] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:106
1043[ 20.670453] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:107
1044[ 20.670461] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:108
1045[ 20.670469] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:109
1046[ 20.670477] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:110
1047[ 20.670484] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:111
1048[ 20.670492] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:112
1049[ 20.670500] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:113
1050[ 20.670508] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:114
1051[ 20.670515] udevd[925]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/51-hso-udev.rules:115
1052[ 20.670522] udevd[925]: NAME="%k" is ignored, because it breaks kernel supplied names, please remove it from /etc/udev/rules.d/51-hso-udev.rules:124
1053[ 21.931238] wmi: Mapper loaded
1054[ 21.967503] ATK0110 ATK0110:00: EC enabled
1055[ 22.178194] sr 0:0:0:0: Attached scsi generic sg0 type 5
1056[ 22.178221] sr 0:0:1:0: Attached scsi generic sg1 type 5
1057[ 22.178256] sd 7:0:0:0: Attached scsi generic sg2 type 0
1058[ 22.178281] sd 9:0:0:0: Attached scsi generic sg3 type 0
1059[ 22.178308] sd 11:0:0:0: Attached scsi generic sg4 type 0
1060[ 22.178332] sd 11:0:0:1: Attached scsi generic sg5 type 0
1061[ 22.178353] sd 11:0:0:2: Attached scsi generic sg6 type 0
1062[ 22.178374] sd 11:0:0:3: Attached scsi generic sg7 type 0
1063[ 22.178395] sd 12:0:0:0: Attached scsi generic sg8 type 0
1064[ 22.178422] sd 10:0:0:0: Attached scsi generic sg9 type 0
1065[ 22.286042] EDAC MC: Ver: 2.1.0 Jan 4 2012
1066[ 22.295414] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
1067[ 22.295532] SP5100 TCO timer: mmio address 0xb8fe00 already in use
1068[ 22.305290] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
1069[ 22.305332] xhci_hcd 0000:02:00.0: setting latency timer to 64
1070[ 22.305335] xhci_hcd 0000:02:00.0: xHCI Host Controller
1071[ 22.305345] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
1072[ 22.339774] AMD64 EDAC driver v3.4.0
1073[ 22.339865] EDAC amd64: DRAM ECC disabled.
1074[ 22.339879] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1075[ 22.339880] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1076[ 22.339881] (Note that use of the override may cause unknown side effects.)
1077[ 22.342984] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
1078[ 22.350251] xhci_hcd 0000:02:00.0: irq 17, io mem 0xf7efe000
1079[ 22.350305] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
1080[ 22.350310] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
1081[ 22.350315] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
1082[ 22.350319] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
1083[ 22.350323] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
1084[ 22.350326] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
1085[ 22.350331] xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X
1086[ 22.350405] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
1087[ 22.350407] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1088[ 22.350408] usb usb8: Product: xHCI Host Controller
1089[ 22.350410] usb usb8: Manufacturer: Linux 2.6.39.4-5.1-server xhci_hcd
1090[ 22.350411] usb usb8: SerialNumber: 0000:02:00.0
1091[ 22.350493] xHCI xhci_add_endpoint called for root hub
1092[ 22.350495] xHCI xhci_check_bandwidth called for root hub
1093[ 22.350517] hub 8-0:1.0: USB hub found
1094[ 22.350522] hub 8-0:1.0: 2 ports detected
1095[ 22.350566] xhci_hcd 0000:02:00.0: xHCI Host Controller
1096[ 22.350571] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
1097[ 22.398748] mtp-probe[1292]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-1"
1098[ 22.398758] mtp-probe[1282]: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-2"
1099[ 22.398764] mtp-probe[1284]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-3"
1100[ 22.398771] mtp-probe[1333]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3"
1101[ 22.398776] mtp-probe[1278]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb2/2-1"
1102[ 22.398782] mtp-probe[1314]: checking bus 5, device 6: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-5"
1103[ 22.399190] mtp-probe[1343]: checking bus 5, device 7: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4.1"
1104[ 22.399349] mtp-probe[1347]: checking bus 5, device 8: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4.3"
1105[ 22.399356] mtp-probe[1255]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-1"
1106[ 22.430191] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
1107[ 22.430194] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1108[ 22.430196] usb usb9: Product: xHCI Host Controller
1109[ 22.430198] usb usb9: Manufacturer: Linux 2.6.39.4-5.1-server xhci_hcd
1110[ 22.430199] usb usb9: SerialNumber: 0000:02:00.0
1111[ 22.430279] xHCI xhci_add_endpoint called for root hub
1112[ 22.430281] xHCI xhci_check_bandwidth called for root hub
1113[ 22.430301] hub 9-0:1.0: USB hub found
1114[ 22.430309] hub 9-0:1.0: 2 ports detected
1115[ 22.650834] mtp-probe[1282]: bus: 5, device: 3 was not an MTP device
1116[ 22.650842] mtp-probe[1292]: bus: 5, device: 2 was not an MTP device
1117[ 22.650935] mtp-probe[1314]: bus: 5, device: 6 was not an MTP device
1118[ 22.650941] mtp-probe[1347]: bus: 5, device: 8 was not an MTP device
1119[ 22.651814] mtp-probe[1343]: bus: 5, device: 7 was not an MTP device
1120[ 22.653182] mtp-probe[1333]: bus: 1, device: 4 was not an MTP device
1121[ 22.653522] mtp-probe[1762]: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-2"
1122[ 22.653728] mtp-probe[1761]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-1"
1123[ 22.654146] mtp-probe[1763]: checking bus 5, device 8: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4.3"
1124[ 22.654153] mtp-probe[1764]: checking bus 5, device 6: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-5"
1125[ 22.654374] mtp-probe[1766]: checking bus 5, device 7: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4.1"
1126[ 22.655219] mtp-probe[1255]: bus: 4, device: 2 was not an MTP device
1127[ 22.656834] mtp-probe[1768]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3"
1128[ 22.657133] mtp-probe[1278]: bus: 2, device: 2 was not an MTP device
1129[ 22.657830] mtp-probe[1769]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-1"
1130[ 22.659323] mtp-probe[1762]: bus: 5, device: 3 was not an MTP device
1131[ 22.659439] mtp-probe[1763]: bus: 5, device: 8 was not an MTP device
1132[ 22.659804] mtp-probe[1771]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb2/2-1"
1133[ 22.665698] mtp-probe[1766]: bus: 5, device: 7 was not an MTP device
1134[ 22.666322] mtp-probe[1764]: bus: 5, device: 6 was not an MTP device
1135[ 22.666441] mtp-probe[1761]: bus: 5, device: 2 was not an MTP device
1136[ 22.668701] mtp-probe[1768]: bus: 1, device: 4 was not an MTP device
1137[ 22.673219] mtp-probe[1769]: bus: 4, device: 2 was not an MTP device
1138[ 22.673228] mtp-probe[1771]: bus: 2, device: 2 was not an MTP device
1139[ 22.684481] ata_id[1821]: HDIO_GET_IDENTITY failed for '/dev/sdg'
1140[ 22.699233] mtp-probe[1284]: bus: 4, device: 3 was not an MTP device
1141[ 22.699510] ata_id[1812]: HDIO_GET_IDENTITY failed for '/dev/sdh'
1142[ 22.702422] mtp-probe[1902]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-3"
1143[ 22.753242] mtp-probe[1902]: bus: 4, device: 3 was not an MTP device
1144[ 23.371376] usbcore: registered new interface driver usbserial
1145[ 23.371388] USB Serial support registered for generic
1146[ 23.371460] usbcore: registered new interface driver usbserial_generic
1147[ 23.371461] usbserial: USB Serial Driver core
1148[ 23.442670] USB Serial support registered for pl2303
1149[ 23.442691] pl2303 4-1:1.0: pl2303 converter detected
1150[ 23.463278] usb 4-1: pl2303 converter now attached to ttyUSB0
1151[ 23.463297] usbcore: registered new interface driver pl2303
1152[ 23.463298] pl2303: Prolific PL2303 USB to serial adaptor driver
1153[ 23.757751] fuse init (API version 7.16)
1154[ 25.540126] ntfs-3g[2039]: Version 2011.4.12 external FUSE 28
1155[ 25.540134] ntfs-3g[2039]: Mounted /dev/sdh1 (Read-Write, label "1TBDATA", NTFS 3.1)
1156[ 25.540139] ntfs-3g[2039]: Cmdline options: rw
1157[ 25.540144] ntfs-3g[2039]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sdh1,blkdev,blksize=4096
1158[ 25.540150] ntfs-3g[2039]: Ownership and permissions disabled, configuration type 1
1159[ 26.085121] Adding 8827680k swap on /dev/sda5. Priority:0 extents:1 across:8827680k
1160[ 26.358251] nvidia: module license 'NVIDIA' taints kernel.
1161[ 26.358255] Disabling lock debugging due to kernel taint
1162[ 26.707042] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
1163[ 26.707051] nvidia 0000:01:00.0: setting latency timer to 64
1164[ 26.707055] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
1165[ 26.707241] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011
1166[ 26.712635] ntfs-3g[2066]: Version 2011.4.12 external FUSE 28
1167[ 26.712644] ntfs-3g[2066]: Mounted /dev/sdb1 (Read-Write, label "2TBDATA", NTFS 3.1)
1168[ 26.712650] ntfs-3g[2066]: Cmdline options: rw
1169[ 26.712655] ntfs-3g[2066]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sdb1,blkdev,blksize=4096
1170[ 26.712661] ntfs-3g[2066]: Ownership and permissions disabled, configuration type 1