· 9 years ago · Jan 25, 2017, 05:54 PM
1[ 0.000000]@0 Initializing cgroup subsys cpuset
2[ 0.000000]@0 Initializing cgroup subsys cpu
3[ 0.000000]@0 Initializing cgroup subsys cpuacct
4[ 0.000000]@0 Linux version 3.18.31-blu_spark-custom (engstk@sparky) (gcc version 6.3.1 20170109 (crosstool-NG 1.22.0-423 - blu_naro-6.3-2017.01) ) #37 SMP PREEMPT Mon Jan 23 12:37:49 WET 2017
5[ 0.000000]@0 CPU: AArch64 Processor [511f2112] revision 2
6[ 0.000000]@0 alternatives: detected feature GIC system register CPU interface
7[ 0.000000]@0 Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP
8[ 0.000000]@0 efi: Getting EFI parameters from FDT:
9[ 0.000000]@0 efi: UEFI not found.
10[ 0.000000]@0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
11[ 0.000000]@0 Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
12[ 0.000000]@0 Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
13[ 0.000000]@0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
14[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
15[ 0.000000]@0 Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
16[ 0.000000]@0 Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB
17[ 0.000000]@0 Reserved memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB
18[ 0.000000]@0 Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB
19[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
20[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
21[ 0.000000]@0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
22[ 0.000000]@0 Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
23[ 0.000000]@0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
24[ 0.000000]@0 Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
25[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
26[ 0.000000]@0 Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
27[ 0.000000]@0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
28[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
29[ 0.000000]@0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
30[ 0.000000]@0 Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
31[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
32[ 0.000000]@0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
33[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
34[ 0.000000]@0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
35[ 0.000000]@0 cma: Reserved 32 MiB at 0x00000000f6800000
36[ 0.000000]@0 psci: probing for conduit method from DT.
37[ 0.000000]@0 psci: PSCIv1.0 detected in firmware.
38[ 0.000000]@0 psci: Using standard PSCI v0.2 function IDs
39[ 0.000000]@0 psci: Initializing psci_cpu_init
40[ 0.000000]@0 psci: Initializing psci_cpu_init
41[ 0.000000]@0 psci: Initializing psci_cpu_init
42[ 0.000000]@0 PERCPU: Embedded 15 pages/cpu @ffffffc17d70e000 s22912 r8192 d30336 u61440
43[ 0.000000]@0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490406
44[ 0.000000]@0 Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom androidboot.bootdevice=624000.ufshc androidboot.selinux=permissive user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff enforcing=0 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=320e7edf gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi androidboot.mode=recovery androidboot.ftm_mode=ftm_recovery androidboot.project_name=15801 androidboot.selinux=permissive androidboot.rf_version=21 androidboot.hw_version=16 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001580206623032500010665 androidboot.enable_dm_verity=1 androidboot.secboot=enabled androidboot.angela=disabled androidboot.nobattlog_buf_len individual max cpu contribution: 32768 bytes
45[ 0.000000]@0 log_buf_len total cpu_extra contributions: 98304 bytes
46[ 0.000000]@0 log_buf_len min size: 131072 bytes
47[ 0.000000]@0 log_buf_len: 262144 bytes
48[ 0.000000]@0 early log buf free: 124472(94%)
49[ 0.000000]@0 PID hash table entries: 4096 (order: 3, 32768 bytes)
50[ 0.000000]@0 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
51[ 0.000000]@0 Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
52[ 0.000000]@0 Memory: 5677576K/6056256K available (13296K kernel code, 1761K rwdata, 6944K rodata, 460K init, 3189K bss, 378680K reserved)
53[ 0.000000]@0 Virtual kernel memory layout:
54 vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
55 vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
56 0xffffffbdc0000000 - 0xffffffbdc5f65400 ( 95 MB actual)
57 PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
58 fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
59 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
60 memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
61 .init : 0xffffffc001447000 - 0xffffffc0014ba000 ( 460 KB)
62 .text : 0xffffffc000080000 - 0xffffffc001446344 ( 20249 KB)
63 .data : 0xffffffc0014d5000 - 0xffffffc00168d600 ( 1762 KB)
64[ 0.000000]@0 SLUB: HWalign=128, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
65[ 0.000000]@0 HMP scheduling enabled.
66[ 0.000000]@0 Preemptible hierarchical RCU implementation.
67[ 0.000000]@0 RCU dyntick-idle grace-period acceleration is enabled.
68[ 0.000000]@0 NR_IRQS:64 nr_irqs:64 0
69[ 0.000000]@0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
70[ 0.000000]@0 MPM 1 irq mapping errored -517
71[ 0.000000]@0 Offload RCU callbacks from all CPUs
72[ 0.000000]@0 Offload RCU callbacks from CPUs: 0-3.
73[ 0.000000]@0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
74[ 0.000000]@0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
75[ 0.000016]@0 Switched to clocksource arch_sys_counter
76[ 0.000632]@0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
77[ 0.000646]@0 pid_max: default: 32768 minimum: 301
78[ 0.000708]@0 Security Framework initialized
79[ 0.000721]@0 SELinux: Initializing.
80[ 0.000776]@0 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
81[ 0.000785]@0 Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
82[ 0.001303]@0 Initializing cgroup subsys freezer
83[ 0.001563]@0 /cpus/cpu@0: Unknown CPU type
84[ 0.001572]@0 /cpus/cpu@1: Unknown CPU type
85[ 0.001580]@0 /cpus/cpu@100: Unknown CPU type
86[ 0.001589]@0 /cpus/cpu@101: Unknown CPU type
87[ 0.001616]@0 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
88[ 0.001639]@0 EFI services will not be available.
89[ 0.002579]@0 NOHZ: local_softirq_pending 02
90[ 0.004452]@0
91**********************************************************
92[ 0.004463]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
93[ 0.004468]@0 ** **
94[ 0.004472]@0 ** trace_printk() being used. Allocating extra memory. **
95[ 0.004476]@0 ** **
96[ 0.004480]@0 ** This means that this is a DEBUG kernel and it is **
97[ 0.004484]@0 ** unsafe for produciton use. **
98[ 0.004488]@0 ** **
99[ 0.004492]@0 ** If you see this message and you are not debugging **
100[ 0.004496]@0 ** the kernel, report this immediately to your vendor! **
101[ 0.004499]@0 ** **
102[ 0.004503]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
103[ 0.004507]@0 **********************************************************
104[ 0.006234]@0 MSM Memory Dump base table set up
105[ 0.006258]@0 MSM Memory Dump apps data table set up
106[ 0.006275]@0 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
107[ 0.007762]@0 clock-cpu-8996: configuring clocks for the perf cluster
108[ 0.007928]@0 cpu_clock_8996_early_init: finished CPU clock configuration
109[ 0.015734]@0 Brought up 4 CPUs
110[ 0.015755]@0 SMP: Total of 4 processors activated.
111[ 0.019530]@0 DMI not present or invalid.
112[ 0.026677]@0 pinctrl core: initialized pinctrl subsystem
113[ 0.027084]@0 regulator-dummy: no parameters
114[ 0.081233]@0 NET: Registered protocol family 16
115[ 0.090090]@1 cpuidle: using governor ladder
116[ 0.096780]@1 cpuidle: using governor menu
117[ 0.103439]@1 cpuidle: using governor qcom
118[ 0.104418]@1 vdso: 2 pages (1 code @ ffffffc000d7a000, 1 data @ ffffffc0014dc000)
119[ 0.104871]@1 software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc0bfc00000-ffffffc0bfffffff]
120[ 0.105547]@1 DMA: preallocated 256 KiB pool for atomic allocations
121[ 0.108447]@0 kernel boot_mode = normal[0]
122[ 0.119298]@0 qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
123[ 0.120257]@0 sps:sps is ready.
124[ 0.120880]@0 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
125[ 0.121658]@0 i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
126[ 0.122056]@0 i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
127[ 0.122454]@0 i2c-msm-v2 7577000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_3/i2c_3_active, deferring probe
128[ 0.122831]@0 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
129[ 0.123255]@0 irq: no irq domain found for /soc/pinctrl@01010000 !
130[ 0.124976]@0 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
131[ 0.147373]@0 smd_channel_probe_now: allocation table not initialized
132[ 0.147651]@0 smd_channel_probe_now: allocation table not initialized
133[ 0.147907]@0 smd_channel_probe_now: allocation table not initialized
134[ 0.148165]@0 smd_channel_probe_now: allocation table not initialized
135[ 0.148391]@0 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
136[ 0.148718]@1 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
137[ 0.149428]@1 msm_rpm_dev_probe: APSS-RPM communication over GLINK
138[ 0.156960]@2 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
139[ 0.158387]@2 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
140[ 0.162710]@2 pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
141[ 0.163326]@2 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
142[ 0.163628]@2 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
143[ 0.164033]@2 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
144[ 0.164359]@2 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
145[ 0.166828]@2 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
146[ 0.166852]@2 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
147[ 0.166871]@2 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
148[ 0.166884]@2 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
149[ 0.166942]@2 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
150[ 0.166949]@2 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
151[ 0.166958]@2 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
152[ 0.166966]@2 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
153[ 0.171559]@2 platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
154[ 0.174913]@0 smd_channel_probe_now: allocation table not initialized
155[ 0.175130]@1 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
156[ 0.175814]@3 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
157[ 0.175904]@3 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
158[ 0.176052]@3 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
159[ 0.176299]@3 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
160[ 0.180131]@3 console [pstore-1] enabled
161[ 0.180256]@3 pstore: Registered ramoops as persistent store backend
162[ 0.180266]@3 ramoops: attached 0x200000@0xac000000, ecc: 0/0
163[ 0.180401]@3 XCB bootloader_log_probe
164[ 0.180647]@3 bootloader_log!
165[ 0.181579]@3 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
166[ 0.181926]@3 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
167[ 0.182250]@3 apcc_l3_mem_acc_corner: 0 <--> 0 mV
168[ 0.182577]@3 gfx_mem_acc_corner: 0 <--> 0 mV
169[ 0.182964]@3 kryo0-retention: 468 <--> 892 mV at 520 mV
170[ 0.183163]@3 kryo0: 468 <--> 892 mV at 754 mV
171[ 0.183300]@3 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
172[ 0.183642]@3 kryo1-retention: 468 <--> 892 mV at 520 mV
173[ 0.183840]@3 kryo1: 468 <--> 892 mV at 754 mV
174[ 0.183976]@3 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
175[ 0.188166]@3 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
176[ 0.189419]@3 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
177[ 0.207059]@1 __of_mpm_init(): MPM driver mapping exists
178[ 0.209086]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
179[ 0.209279]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
180[ 0.209293]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
181[ 0.209589]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
182[ 0.209647]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
183[ 0.209659]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
184[ 0.209944]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
185[ 0.209999]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
186[ 0.210011]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
187[ 0.210328]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
188[ 0.210385]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
189[ 0.210397]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
190[ 0.210644]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
191[ 0.210699]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
192[ 0.210711]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
193[ 0.210855]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
194[ 0.211586]@3 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
195[ 0.212012]@3 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
196[ 0.212379]@3 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
197[ 0.212804]@3 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
198[ 0.213169]@3 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
199[ 0.213611]@3 pm8994_s3: 1300 mV normal idle
200[ 0.214023]@3 pm8994_s4: 1800 mV normal idle
201[ 0.214427]@3 pm8994_s5: 2150 mV normal idle
202[ 0.214831]@3 pm8994_s7: 800 mV normal idle
203[ 0.215233]@3 pm8994_l1: 1000 mV normal idle
204[ 0.215654]@3 pm8994_l2: 1250 mV normal idle
205[ 0.216278]@3 pm8994_l3: 1100 mV normal idle
206[ 0.216715]@3 pm8994_l4: 1225 mV normal idle
207[ 0.217121]@3 pm8994_l6: 1200 mV normal idle
208[ 0.217523]@3 pm8994_l8: 1800 mV normal idle
209[ 0.217931]@3 pm8994_l9: 1800 mV normal idle
210[ 0.218339]@3 pm8994_l10: 1800 mV normal idle
211[ 0.218740]@3 pm8994_l11: 1150 mV normal idle
212[ 0.219158]@3 pm8994_l12: 1800 mV normal idle
213[ 0.219898]@3 pm8994_l13: 29500 <--> 2950 mV at 2950 mV normal idle
214[ 0.220336]@3 pm8994_l15: 1800 mV normal idle
215[ 0.220741]@3 pm8994_l16: 2700 mV normal idle
216[ 0.221149]@3 pm8994_l17: 2600 mV normal idle
217[ 0.221559]@3 pm8994_l18: 3300 mV normal idle
218[ 0.221964]@3 pm8994_l19: 3000 mV normal idle
219[ 0.222369]@3 pm8994_l20: 2950 mV normal idle
220[ 0.222779]@3 pm8994_l21: 2950 mV normal idle
221[ 0.223189]@3 pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
222[ 0.223634]@3 pm8994_l23: 2800 mV normal idle
223[ 0.224036]@3 pm8994_l24: 3075 mV normal idle
224[ 0.224452]@3 pm8994_l25: 1200 mV normal idle
225[ 0.225104]@3 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
226[ 0.225467]@3 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
227[ 0.225873]@3 pm8994_l27: 1200 mV normal idle
228[ 0.226290]@3 pm8994_l28: 925 mV normal idle
229[ 0.226924]@3 pm8994_l29: 2800 mV normal idle
230[ 0.227335]@3 pm8994_l30: 1800 mV normal idle
231[ 0.227738]@3 pm8994_l32: 1800 mV normal idle
232[ 0.228143]@3 pm8994_lvs1: no parameters
233[ 0.228513]@3 pm8994_lvs2: no parameters
234[ 0.228891]@3 pmi8994_s1: 1025 mV normal idle
235[ 0.229292]@3 pmi8994_boost_5v: no parameters
236[ 0.229384]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
237[ 0.229483]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
238[ 0.229760]@3 pmi8994_boost_pin_ctrl: no parameters
239[ 0.229809]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
240[ 0.229900]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
241[ 0.230264]@3 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
242[ 0.230607]@3 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
243[ 0.230822]@3 pm8994_s11_avs_limit: 470 <--> 1140 mV
244[ 0.230928]@3 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
245[ 0.231732]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
246[ 0.231756]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
247[ 0.231768]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
248[ 0.231783]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
249[ 0.231799]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
250[ 0.232118]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
251[ 0.232131]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
252[ 0.232143]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
253[ 0.232155]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
254[ 0.232629]@3 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
255[ 0.233034]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
256[ 0.233100]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
257[ 0.233114]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
258[ 0.233440]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
259[ 0.233502]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
260[ 0.233514]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
261[ 0.233803]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
262[ 0.233859]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
263[ 0.233871]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
264[ 0.234151]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
265[ 0.234206]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
266[ 0.234218]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
267[ 0.234464]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
268[ 0.234520]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
269[ 0.234532]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
270[ 0.234768]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
271[ 0.253920]@3 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
272[ 0.254999]@3 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
273[ 0.255018]@3 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
274[ 0.255031]@3 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
275[ 0.255258]@3 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
276[ 0.255272]@3 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
277[ 0.255287]@3 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
278[ 0.255534]@3 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
279[ 0.255548]@3 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
280[ 0.255558]@3 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
281[ 0.264911]@3 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
282[ 0.266556]@3 pmi8994_boost_5v: no parameters
283[ 0.266647]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
284[ 0.266791]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
285[ 0.266995]@3 pmi8994_boost_pin_ctrl: no parameters
286[ 0.267044]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
287[ 0.267131]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
288[ 0.267841]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
289[ 0.267863]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
290[ 0.267876]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
291[ 0.267890]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
292[ 0.267906]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
293[ 0.268083]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
294[ 0.268094]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
295[ 0.268105]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
296[ 0.268117]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
297[ 0.268748]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
298[ 0.268763]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
299[ 0.268773]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
300[ 0.268783]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
301[ 0.268793]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
302[ 0.268804]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
303[ 0.268995]@3 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
304[ 0.269182]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 595000 uV
305[ 0.269194]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV
306[ 0.269203]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 815000 uV
307[ 0.269212]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 930000 uV
308[ 0.269294]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 314
309[ 0.269304]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 468, quot_offset[ 7]= 115
310[ 0.269314]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 718, quot_offset[ 7]= 250
311[ 0.269324]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 916, quot_offset[ 7]= 195
312[ 0.269446]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
313[ 0.269456]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
314[ 0.269465]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
315[ 0.269474]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
316[ 0.269484]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
317[ 0.269494]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
318[ 0.269632]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 595000 uV
319[ 0.269642]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 685000 uV
320[ 0.269651]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 815000 uV
321[ 0.269659]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 930000 uV
322[ 0.269701]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 314
323[ 0.269710]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 468, quot_offset[ 7]= 115
324[ 0.269720]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 718, quot_offset[ 7]= 250
325[ 0.269729]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 916, quot_offset[ 7]= 195
326[ 0.269826]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
327[ 0.269836]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
328[ 0.269845]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
329[ 0.269855]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
330[ 0.269864]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
331[ 0.269875]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
332[ 0.270117]@3 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
333[ 0.270319]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
334[ 0.270331]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 655000 uV
335[ 0.270341]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 735000 uV
336[ 0.270349]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1000000 uV
337[ 0.270457]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 310
338[ 0.270466]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 404, quot_offset[ 7]= 55
339[ 0.270476]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 560, quot_offset[ 7]= 155
340[ 0.270486]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1030, quot_offset[ 7]= 470
341[ 0.270936]@3 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
342apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
343[ 0.271285]@3 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
344[ 0.274480]@3 cpr3_regulator_measure_aging: apcc: average quotient delta=0 (count=10)
345[ 0.274508]@3 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=2500 uV
346[ 0.274973]@3 apc1_corner: 0 <--> 0 mV at 0 mV
347[ 0.276507]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
348[ 0.276526]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
349[ 0.276829]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 650000 uV
350[ 0.276842]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 705000 uV
351[ 0.276852]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 825000 uV
352[ 0.276860]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 915000 uV
353[ 0.277021]@3 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
354gfx_corner: 0 <--> 0 mV at 0 mV
355[ 0.278405]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
356[ 0.278494]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
357i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
358i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
359[ 0.279766]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
360i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
361i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
362[ 0.281344]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
363i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
364i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
365[ 0.282945]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
366i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
367i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
368[ 0.283929]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
369i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
370cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
371[ 0.287467]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu0
372[ 0.287512]@3 clock-cpu-8996: set OPP pair (1728000000 Hz, 925000 uv) on cpu0
373[ 0.287533]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu1
374[ 0.287571]@3 clock-cpu-8996: set OPP pair (1728000000 Hz, 925000 uv) on cpu1
375[ 0.287588]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu2
376[ 0.287640]@3 clock-cpu-8996: set OPP pair (2265600000 Hz, 1005000 uv) on cpu2
377[ 0.287658]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu3
378[ 0.287708]@3 clock-cpu-8996: set OPP pair (2265600000 Hz, 1005000 uv) on cpu3
379[ 0.287842]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 660000 uv) on soc:qcom,m4m
380[ 0.287885]@3 clock-cpu-8996: set OPP pair (1593600000 Hz, 925000 uv) on soc:qcom,m4m
381[ 0.288250]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
382[ 0.288615]@3 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 580000 uV) on b00000.qcom,kgsl-3d0
383[ 0.288641]@3 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 915000 uV) on b00000.qcom,kgsl-3d0
384[ 0.290086]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
385[ 0.290305]@3 pmi8994_boost_5v: no parameters
386[ 0.290372]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
387[ 0.290473]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
388[ 0.290668]@3 pmi8994_boost_pin_ctrl: no parameters
389[ 0.290716]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
390[ 0.290804]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
391[ 0.291546]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
392[ 0.291568]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
393[ 0.291581]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
394[ 0.291595]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
395[ 0.291611]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
396[ 0.291868]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
397[ 0.291883]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
398[ 0.291894]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
399[ 0.291912]@3 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
400[ 0.292886]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
401[ 0.292903]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
402[ 0.292914]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
403[ 0.293077]@3 pmi8994_boost_5v: no parameters
404[ 0.293138]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
405[ 0.293235]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
406[ 0.293474]@3 pmi8994_boost_pin_ctrl: no parameters
407[ 0.293528]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
408[ 0.293617]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
409[ 0.337430]@2 KPI: Bootloader start count = 35984
410[ 0.337450]@2 KPI: Bootloader end count = 256416
411[ 0.337459]@2 KPI: Bootloader display count = 236372
412[ 0.337467]@2 KPI: Bootloader load kernel count = 2671
413[ 0.337478]@2 KPI: Kernel MPM timestamp = 281192
414[ 0.337485]@2 KPI: Kernel MPM Clock frequency = 32768
415[ 0.337500]@2 socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536
416 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=2431716911 num_pmics=2
417[ 0.337531]@2 init_project_info: project_name: 15801 hw_version: 16 rf_v1: 21 rf_v2: 1: rf_v3: 0 paltform_id:246
418[ 0.337544]@2 init_project_info: aboard_version: 1
419[ 0.338427]@2 op_rf_cable_probe: ftm_mode FOUND! use 1 always
420[ 0.338446]@2 modify_rf_cable_smem_info: rf_cable: 1
421[ 0.338453]@2 op_rf_cable_probe: probe ok!
422[ 0.338810]@2 gdsc_mmagic_bimc: no parameters
423[ 0.339428]@2 rome_vreg: no parameters
424[ 0.339676]@2 wlan_en_vreg: no parameters
425[ 0.340306]@2 vgaarb: loaded
426[ 0.341671]@2 SCSI subsystem initialized
427[ 0.342630]@2 usbcore: registered new interface driver usbfs
428[ 0.342684]@2 usbcore: registered new interface driver hub
429[ 0.342860]@1 usbcore: registered new device driver usb
430[ 0.343303]@1 soc:usb_nop_phy supply vcc not found, using dummy regulator
431[ 0.344062]@1 media: Linux media interface: v0.10
432[ 0.344123]@1 Linux video capture interface: v2.00
433[ 0.357164]@1 cpufreq: driver msm up and running
434[ 0.357853]@1 platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
435[ 0.358414]@1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
436[ 0.358960]@1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
437[ 0.359569]@1 ION heap system created
438[ 0.359709]@1 ION heap kmalloc created
439[ 0.359722]@1 ION heap adsp created at 0x00000000ff800000 with size 400000
440[ 0.359733]@1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
441[ 0.359744]@1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
442[ 0.359755]@1 ION heap secure_heap created
443[ 0.360653]@1 msm_bus_fabric_init_driver
444[ 0.364257]@1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
445[ 0.364279]@1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
446[ 0.367849]@1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
447[ 0.368410]@1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
448[ 0.375288]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
449[ 0.375303]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
450[ 0.375313]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
451[ 0.375420]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
452[ 0.375443]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
453[ 0.375463]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
454[ 0.375483]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
455[ 0.375502]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
456[ 0.375521]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
457[ 0.375541]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
458[ 0.376745]@2 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset[0x21] and 'cold' boot
459[ 0.376759]@2 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC)[0x21] and 'cold' boot
460[ 0.376775]@2 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
461[ 0.376892]@2 input: qpnp_pon as /devices/virtual/input/input0
462[ 0.377368]@2 pon_spare_reg: no parameters
463[ 0.377419]@2 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
464[ 0.377475]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion)[0x30] and 'cold' boot
465[ 0.377481]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC)[0x30] and 'cold' boot
466[ 0.377497]@2 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
467[ 0.377648]@2 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
468[ 0.377732]@2 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
469[ 0.378816]@2 ipa ipa2_uc_state_check:296 uC interface not initialized
470[ 0.378831]@2 ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
471[ 0.378836]@2 ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
472[ 0.380974]@3 sps:BAM 0x0000000000684000 is registered.
473ipa ipa2_uc_state_check:296 uC interface not initialized
474[ 0.381892]@3 sps:BAM 0x0000000000684000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:20
475[ 0.383327]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
476[ 0.389343]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
477[ 0.391286]@3 IPA driver initialization was successful.
478[ 0.392510]@3 gdsc_mmagic_video: no parameters
479[ 0.392724]@3 gdsc_mmagic_mdss: no parameters
480[ 0.392904]@3 gdsc_mmagic_camss: no parameters
481[ 0.393123]@3 gdsc_venus: no parameters
482[ 0.393150]@3 gdsc_venus: supplied by gdsc_mmagic_video
483[ 0.393319]@3 gdsc_venus_core0: fast normal
484[ 0.393576]@3 gdsc_venus_core1: fast normal
485[ 0.393749]@3 gdsc_camss_top: no parameters
486[ 0.393772]@3 gdsc_camss_top: supplied by gdsc_mmagic_camss
487[ 0.393943]@3 gdsc_vfe0: no parameters
488[ 0.393961]@3 gdsc_vfe0: supplied by gdsc_camss_top
489[ 0.394146]@3 gdsc_vfe1: no parameters
490[ 0.394164]@3 gdsc_vfe1: supplied by gdsc_camss_top
491[ 0.394342]@3 gdsc_mdss: no parameters
492[ 0.394366]@3 gdsc_mdss: supplied by gdsc_mmagic_mdss
493[ 0.394634]@3 gdsc_jpeg: no parameters
494[ 0.394654]@3 gdsc_jpeg: supplied by gdsc_camss_top
495[ 0.394840]@3 gdsc_cpp: no parameters
496[ 0.394858]@3 gdsc_cpp: supplied by gdsc_camss_top
497[ 0.395019]@3 gdsc_pcie_0: no parameters
498[ 0.395168]@3 gdsc_pcie_1: no parameters
499[ 0.395322]@3 gdsc_pcie_2: no parameters
500[ 0.395466]@3 gdsc_usb30: no parameters
501[ 0.395614]@3 gdsc_ufs: no parameters
502[ 0.395806]@3 gdsc_fd: no parameters
503[ 0.395826]@3 gdsc_fd: supplied by gdsc_camss_top
504[ 0.395991]@3 gdsc_gpu: no parameters
505[ 0.396166]@3 gdsc_gpu_gx: no parameters
506[ 0.396523]@3 gdsc_gpu_gx: supplied by gfx_corner
507[ 0.396820]@3 gdsc_hlos1_vote_aggre0_noc: no parameters
508[ 0.396967]@3 gdsc_hlos1_vote_lpass_adsp: no parameters
509[ 0.397111]@3 gdsc_hlos1_vote_lpass_core: no parameters
510[ 0.397268]@3 gdsc_aggre0_noc: no parameters
511[ 0.399438]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
512[ 0.399466]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
513[ 0.401543]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
514[ 0.401612]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
515[ 0.401623]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
516[ 0.402705]@3 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
517[ 0.403239]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
518[ 0.516810]@3 get_param_by_index_and_offset[75] sid_index = 12 offset = 0 buf = ffffffc00193baf0 length = 420
519[ 0.516936]@3 Advanced Linux Sound Architecture Driver Initialized.
520[ 0.517533]@3 Bluetooth: ffffffc1764b3d50
521NET: Registered protocol family 31
522[ 0.517632]@3 Bluetooth: ffffffc1764b3d50
523Bluetooth: ffffffc1764b3d30Bluetooth: ffffffc1764b3d10
524Bluetooth: ffffffc1764b3d20cfg80211: Calling CRDA to update world regulatory domain
525[ 0.518091]@3 cfg80211: World regulatory domain updated:
526[ 0.518101]@3 cfg80211: DFS Master region: unset
527cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
528[ 0.518127]@3 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
529[ 0.518136]@3 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
530[ 0.518145]@3 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
531[ 0.518153]@3 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
532[ 0.518161]@3 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
533[ 0.518169]@3 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
534[ 0.518177]@3 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
535[ 0.518185]@3 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
536[ 0.518393]@3 pcie:pcie_init.
537[ 0.521579]@3 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
538[ 0.524595]@3 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
539[ 0.527444]@0 pmi8994_boost_5v: no parameters
540[ 0.527746]@0 pmi8994_boost_5v: supplied by pon_spare_reg
541[ 0.528235]@0 pmi8994_boost_pin_ctrl: no parameters
542[ 0.528398]@0 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
543[ 0.529143]@3 Switched to clocksource arch_sys_counter
544[ 0.530283]@3 bcl_peripheral:bcl_perph_init BCL Initialized
545[ 0.534479]@3 NET: Registered protocol family 2
546[ 0.535148]@3 TCP established hash table entries: 65536 (order: 7, 524288 bytes)
547[ 0.535301]@3 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
548[ 0.536206]@3 TCP: Hash tables configured (established 65536 bind 65536)
549[ 0.536394]@3 TCP: reno registered
550[ 0.536448]@3 UDP hash table entries: 4096 (order: 5, 131072 bytes)
551[ 0.536537]@3 UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
552[ 0.537169]@3 NET: Registered protocol family 1
553[ 0.537827]@3 Trying to unpack rootfs image as initramfs...
554[ 0.590290]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:63
555[ 0.590355]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:63
556[ 0.590365]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:63
557[ 0.590375]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:63
558[ 0.690350]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:61
559[ 0.690410]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:61
560[ 0.690421]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:61
561[ 0.690431]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:61
562[ 0.741203]@3 Freeing initrd memory: 8964K (ffffffc002200000 - ffffffc002ac1000)
563[ 0.743318]@3 kryo perfevents: CPU pmu for kryo-pmuv3 detected
564[ 0.749677]@3 futex hash table entries: 1024 (order: 5, 131072 bytes)
565[ 0.749833]@3 audit: initializing netlink subsys (disabled)
566[ 0.749951]@3 audit: type=2000 audit(0.746:1): initialized
567[ 0.750649]@3 vmscan: error setting kswapd cpu affinity mask
568[ 0.754014]@3 VFS: Disk quotas dquot_6.5.2
569[ 0.754129]@3 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
570[ 0.754869]@3 Registering sdcardfs 0.1
571[ 0.755343]@3 ntfs: driver 2.1.31 [Flags: R/W].
572[ 0.755469]@3 fuse init (API version 7.23)
573[ 0.755872]@3 exFAT: Version 1.2.9
574[ 0.758525]@3 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
575[ 0.758547]@3 io scheduler noop registered (default)
576[ 0.758560]@3 io scheduler deadline registered
577[ 0.758671]@3 io scheduler cfq registered
578[ 0.758694]@3 io scheduler fiops registered
579[ 0.758707]@3 io scheduler zen registered
580[ 0.770260]@3 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
581[ 0.771803]@3 No change in context(0==0), skip
582[ 0.772870]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
583[ 0.772883]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
584[ 0.772891]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
585[ 0.772897]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
586[ 0.772920]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
587[ 0.772928]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
588[ 0.772936]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
589[ 0.772943]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
590[ 0.772961]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
591[ 0.772968]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
592[ 0.772986]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
593[ 0.772993]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
594[ 0.773005]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
595[ 0.773105]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
596[ 0.773544]@3 xlog_status: enable:0, panic:0, dump:1
597[ 0.774888]@3 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
598[ 0.779983]@3 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
599[ 0.780296]@3 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
600[ 0.780440]@3 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
601[ 0.780579]@3 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
602[ 0.783498]@3 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
603[ 0.783953]@3 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd
604[ 0.783972]@3 mdss_dsi_panel_init: Panel Name = samsung s6e3fa3 1080p cmd mode dsi panel
605[ 0.784100]@3 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd" (ffffffc1764b3490)
606[ 0.784126]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
607[ 0.784133]@3 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
608[ 0.784208]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-Adobe-rgb-on-command
609[ 0.784219]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-Adobe-rgb-off-command
610[ 0.784229]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-dci-p3-on-command
611[ 0.784239]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-dci-p3-off-command
612[ 0.784300]@3 mdss_dsi_parse_panel_features: partial_update_enabled=0
613[ 0.784312]@3 mdss_dsi_parse_panel_features: ulps feature disabled
614[ 0.784322]@3 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
615mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
616[ 0.784365]@3 mdss_dsi_panel_init: Panel Manufacture = SAMSUNG
617[ 0.784371]@3 mdss_dsi_panel_init: Panel Version = S6E3FA3
618[ 0.784382]@3 high brightness panel: 1
619[ 0.784819]@3 mdss_dsi_parse_ctrl_params:4006 Unable to read qcom,display-id, data=0000000000000000,len=20
620[ 0.784869]@3 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
621[ 0.785112]@3 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
622[ 0.785120]@3 mdss_dsi_retrieve_ctrl_resources+0x15c/0x1b8->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
623[ 0.785145]@3 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80021dc000 ctrl_size=400 phy_base=ffffff80021de400 phy_size=588
624[ 0.785341]@3 dsi_panel_device_register: Continuous splash enabled
625[ 0.785983]@3 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
626[ 0.789353]@3 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
627[ 0.790283]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:49
628[ 0.790297]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:49
629[ 0.790305]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:49
630[ 0.790313]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:49
631[ 0.791771]@3 mdss_dsi_status_init: DSI status check interval:5000
632[ 0.792341]@3 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
633[ 0.794341]@3 mdss_fb_probe: fb0: split_mode:0 left:0 right:0
634[ 0.794891]@3 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
635[ 0.795759]@3 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
636[ 0.795834]@3 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
637[ 0.795900]@3 mdss_mdp_splash_parse_dt: splash mem child node is not present
638[ 0.796985]@3 mdss_mdp_kcal_store_fb0_ctl panel name samsung s6e3fa3 1080p cmd mode dsi panel
639[ 0.796999]@3 mdss_mdp_kcal_store_fb0_ctl panel found...
640[ 0.797036]@3 kcal_ctrl_init: registered
641[ 0.811359]@3 In memshare_probe, Memshare probe success
642[ 0.816604]@3 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
643[ 0.817654]@3 msm_rpm_log_probe: OK
644[ 0.821339]@3 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
645subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
646smd_channel_probe_now: allocation table not initialized
647[ 0.824931]@3 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
648[ 0.828770]@3 uart_tx_gpio is not available
649[ 0.828793]@3 uart_rx_gpio is not available
650[ 0.828799]@3 uart_cts_gpio is not available
651[ 0.828806]@3 uart_rfr_gpio is not available
652[ 0.829745]@3 sps: BAM device 0x0000000007544000 is not registered yet.
653[ 0.829926]@3 sps:BAM 0x0000000007544000 is registered.
6547570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 20, base_baud = 460800) is a MSM HS UART
655[ 0.833735]@3 msm_serial_hs module loaded
656[ 0.834542]@3 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
657[ 0.834678]@3 AXI: get_pdata(): Error: Client name not found
658[ 0.834686]@3 AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
659[ 0.834693]@3 msm_serial_hsl_probe: Bus scaling is disabled
660[ 0.834806]@3 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
661[ 0.834886]@3 msm_hsl_console_setup: console setup on port #0
662[ 5.641265]@2 console [ttyHSL0] enabled
663[ 5.646282]@2 msm_serial_hsl_init: driver initialized
664[ 5.671901]@3 brd: module loaded
665[ 5.675338]@3 loop: module loaded
666[ 5.677765]@3 at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
667[ 5.685451]@3 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
668[ 5.691039]@3 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
669QSEECOM: qseecom_probe: no-clock-support=0x1QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
670[ 5.707822]@3 scm_call failed: func id 0x70000006, arginfo: 0x8887, args: 0x0, 0xf5a16580, 0x80, 0xf584f000, ret: -2, syscall returns: 0xffffffffffffffed, 0x0, 0x0
671[ 5.721739]@3 QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
672[ 5.729663]@3 i2c-core: driver [tusb320] using legacy suspend method
673[ 5.735015]@3 i2c-core: driver [tusb320] using legacy resume method
674[ 5.741283]@3 i2c-core: driver [fusb301] using legacy suspend method
675[ 5.747859]@3 i2c-core: driver [fusb301] using legacy resume method
676[ 5.753868]@3 i2c-core: driver [ptn5150] using legacy suspend method
677[ 5.760165]@3 i2c-core: driver [ptn5150] using legacy resume method
678[ 5.768214]@3 gpio_dev_probe
679[ 5.770161]@3 i= 1 gpio=: 97
680[ 5.772960]@3 i= 2 gpio=: 98
681[ 5.775854]@3 i= 3 gpio=: 100
682[ 5.778812]@3 i= 4 gpio=: 115
683[ 5.781776]@3 i= 5 gpio=: 127
684[ 5.784743]@3 i= 6 gpio=: 133
685[ 5.787707]@3 i= 7 gpio=: 136
686[ 5.790591]@3 gpio_pinctrl_init
687[ 5.794173]@3 gpio_dev_probe ok!
688[ 5.797404]@3 i2c-core: driver [tabla-i2c-core] using legacy suspend method
689[ 5.804021]@3 i2c-core: driver [tabla-i2c-core] using legacy resume method
690[ 5.810922]@3 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
691[ 5.817993]@3 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
692[ 5.825069]@3 i2c-core: driver [tasha-i2c-core] using legacy suspend method
693[ 5.831969]@3 i2c-core: driver [tasha-i2c-core] using legacy resume method
694[ 5.840403]@3 Loading pn544 driver
695[ 5.842847]@3 Enter pn544_probe !!!
696[ 5.846470]@3 pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
697[ 5.851787]@3 successfully got regulator_s4
698[ 5.855736]@2 successfully set regulator voltage_s4
699[ 5.860417]@2 get BBCLK2!!!
700[ 5.863203]@2 clk_prepare_enable. ret = 0
701[ 5.867343]@2 pn544_probe : requesting IRQ 273
702[ 5.871716]@2 pn544_probe pn544_dev->clk_gpio = 0
703[ 5.876338]@2 pn544_probe : requesting IRQ 542
704[ 5.880783]@2 ###clkreq_disable_irq###
705i2c-core: driver [pn544] using legacy suspend method
706[ 5.889138]@2 i2c-core: driver [pn544] using legacy resume method
707[ 5.895233]@2 [NXP-P61] : Entry : p61_dev_init
708[ 5.901037]@2 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
709[ 5.907177]@2 qce 660000.qcedev: CE device = 0x0
710, IO base, CE = 0xffffff8003780000
711, Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
712IO base BAM = 0x (null)
713BAM IRQ 156
714Engines Availability = 0x2011053
715[ 5.926466]@2 sps:BAM 0x0000000000644000 is registered.
716sps:BAM 0x0000000000644000 (va:0xffffff8003800000) enabled: ver:0x27, number of pipes:16
717[ 5.939523]@2 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
718[ 5.955012]@3 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
719[ 5.961611]@3 qcrypto 660000.qcrypto: CE device = 0x0
720, IO base, CE = 0xffffff8003840000
721, Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
722IO base BAM = 0x (null)
723BAM IRQ 156
724Engines Availability = 0x2011053
725[ 5.981492]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
726[ 5.994513]@3 qcrypto 660000.qcrypto: qcrypto-ecb-aes
727[ 5.998639]@3 qcrypto 660000.qcrypto: qcrypto-cbc-aes
728[ 6.003658]@3 qcrypto 660000.qcrypto: qcrypto-ctr-aes
729[ 6.008684]@3 qcrypto 660000.qcrypto: qcrypto-ecb-des
730[ 6.013720]@3 qcrypto 660000.qcrypto: qcrypto-cbc-des
731[ 6.018759]@3 qcrypto 660000.qcrypto: qcrypto-ecb-3des
732[ 6.023878]@3 qcrypto 660000.qcrypto: qcrypto-cbc-3des
733[ 6.028996]@3 qcrypto 660000.qcrypto: qcrypto-xts-aes
734[ 6.034035]@3 qcrypto 660000.qcrypto: qcrypto-sha1
735[ 6.038810]@3 qcrypto 660000.qcrypto: qcrypto-sha256
736[ 6.043757]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
737[ 6.050338]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
738[ 6.056431]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
739[ 6.062853]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
740[ 6.069362]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
741[ 6.075875]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
742[ 6.082475]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
743[ 6.087679]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
744[ 6.093060]@3 qcrypto 660000.qcrypto: qcrypto-aes-ccm
745[ 6.098097]@3 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
746[ 6.106357]@3 ICE IRQ = 28
747[ 6.112495]@3 qcom_ice_get_pdevice: found ice device ffffffc173cb1200
748[ 6.117967]@3 qcom_ice_get_pdevice: matching platform device ffffffc175bf7000
749[ 6.125542]@3 scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
750[ 6.138777]@3 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
751ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
752scsi host0: ufshcd
753[ 6.157858]@3 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002890000
754[ 6.171619]@3 SCSI Media Changer driver v0.25
755[ 6.185514]@3 sps:BAM 0x0000000007544000 (va:0xffffff80025c0000) enabled: ver:0x19, number of pipes:24
756[ 6.189282]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
757[ 6.206180]@3 [NXP-P61] : p61_probe chip select : 1 , bus number = 0
758[ 6.212700]@3 p61_parse_dt: 34, 21 0
759[ 6.216032]@3 [NXP-P61] : Entry : p61_hw_setup
760[ 6.220573]@3 [NXP-P61] : Exit : p61_hw_setup
761[ 6.225078]@3 [NXP-P61] : Entry : p61_disable_irq
762[ 6.229744]@3 [NXP-P61] : Exit : p61_disable_irq
763[ 6.234430]@3 [NXP-P61] : Exit : p61_probe
764[ 6.239659]@3 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
765[ 6.246321]@3 tun: Universal TUN/TAP device driver, 1.6
766[ 6.250751]@3 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
767[ 6.257114]@3 PPP generic driver version 2.4.2
768[ 6.261350]@3 PPP BSD Compression module registered
769[ 6.266145]@3 PPP Deflate Compression module registered
770[ 6.271382]@3 PPP MPPE Compression module registered
771[ 6.276303]@3 NET: Registered protocol family 24
772[ 6.280921]@3 Context not found
773[ 6.316716]@2 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
774[ 6.326149]@2 msm_pcie_enable: PCIe RC0 PHY is ready!
775[ 6.340321]@2 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
776[ 6.388182]@0 msm_pcie_enable: PCIe RC0 link initialized
777[ 6.392596]@0 PCI host bridge /soc/qcom,pcie@00600000 ranges:
778[ 6.398208]@0 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
779[ 6.405713]@2 IO 0x0c200000..0x0c2fffff -> 0x0c200000
780[ 6.410967]@2 MEM 0x0c300000..0x0cffffff -> 0x0c300000
781[ 6.418269]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
782[ 6.426443]@0 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
783[ 6.426451]@0 pci_bus 0000:00: root bus resource [bus 00-ff]
784[ 6.426458]@0 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
785[ 6.426463]@0 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
786[ 6.426641]@0 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
787[ 6.426740]@0 pci 0000:00:00.0: IOMMU is currently not supported for PCI
788[ 6.426875]@0 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
789[ 6.427106]@0 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
790[ 6.427506]@0 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
791[ 6.427682]@0 pci 0000:01:00.0: IOMMU is currently not supported for PCI
792[ 6.428480]@0 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
793[ 6.428505]@0 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
794[ 6.428511]@0 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
795[ 6.428563]@0 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
796[ 6.428796]@0 pci 0000:00:00.0: PCI bridge to [bus 01]
797[ 6.428832]@0 pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
798[ 6.430284]@0 cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
799msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
800[ 6.454582]@0 cnss: Platform driver probed successfully.
801[ 6.457286]@0 usbcore: registered new interface driver asix
802[ 6.457387]@0 usbcore: registered new interface driver ax88179_178a
803[ 6.457420]@0 usbcore: registered new interface driver cdc_ether
804[ 6.457445]@0 usbcore: registered new interface driver net1080
805[ 6.457469]@0 usbcore: registered new interface driver cdc_subset
806[ 6.457494]@0 usbcore: registered new interface driver zaurus
807[ 6.457870]@0 usbcore: registered new interface driver cdc_ncm
808[ 6.458509]@0 msm_sharedmem: sharedmem_register_qmi: qmi init successful
809[ 6.462109]@0 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
810[ 6.466261]@3 7411000.qusb supply USB3_GDSC not found, using dummy regulator
811[ 6.469569]@3 msm-dwc3 6a00000.ssusb: unable to get dbm device
812[ 6.472955]@3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
813[ 6.472970]@3 ehci-pci: EHCI PCI platform driver
814[ 6.473074]@3 usbcore: registered new interface driver usb-storage
815[ 6.473094]@3 usbcore: registered new interface driver ums-alauda
816[ 6.473112]@3 usbcore: registered new interface driver ums-cypress
817[ 6.473136]@3 usbcore: registered new interface driver ums-datafab
818[ 6.473153]@3 usbcore: registered new interface driver ums-freecom
819[ 6.473169]@3 usbcore: registered new interface driver ums-isd200
820[ 6.473184]@3 usbcore: registered new interface driver ums-jumpshot
821[ 6.473201]@3 usbcore: registered new interface driver ums-karma
822[ 6.473216]@3 usbcore: registered new interface driver ums-sddr09
823[ 6.473232]@3 usbcore: registered new interface driver ums-sddr55
824[ 6.473247]@3 usbcore: registered new interface driver ums-usbat
825[ 6.473326]@3 usbcore: registered new interface driver usbserial
826[ 6.473412]@3 usbcore: registered new interface driver usb_ehset_test
827[ 6.474000]@3 gbridge_init: gbridge_init successs.
828[ 6.474116]@3 mousedev: PS/2 mouse device common for all mice
829[ 6.474264]@3 usbcore: registered new interface driver xpad
830[ 6.474269]@3 synaptics,s3320: tpd_driver_init enter
831[ 6.475006]@3 synaptics,s3320: before on cpu [3]
832[ 6.475009]@3 synaptics,s3320: check CPU[0] is [online]
833[ 6.475415]@3 touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 3
834[ 6.475420]@3 touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
835[ 6.477408]@3 input: tri-state-key as /devices/soc/soc:tri_state_key/input/input1
836[ 6.477586]@3 switch_data->key3_gpio=1013
837[ 6.477598]@3 switch_data->key2_gpio=1012
838[ 6.477608]@3 switch_data->key1_gpio=1014
839[ 6.479008]@3 fpc1020_probe
840[ 6.479224]@3 fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
841[ 6.479269]@3 fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
842[ 6.479291]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
843[ 6.479294]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
844[ 6.479323]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143
845[ 6.479326]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
846[ 6.479351]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
847[ 6.479469]@3 input: fpc1020 as /devices/virtual/input/input2
848[ 6.479735]@3 fpc1020 soc:fpc_fpc1020: requested irq 359
849[ 6.479785]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
850[ 6.481291]@3 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
851[ 6.481474]@3 i2c /dev entries driver
852[ 6.513966]@3 vmem: Up and running with 4 banks of memory from [irq size 268613553609 window disabled]
853[ 6.529987]@3 msm_camera_pinctrl_init:1197 Getting pinctrl handle failed
854[ 6.530001]@3 msm_actuator_platform_probe:2026 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
855[ 6.530137]@3 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
856[ 6.545767]@3 msm_cci_init:1374: hw_version = 0x10040000
857[ 6.546006]@3 msm_eeprom_imx298_read_vendorInfo read 0x0700=1
858[ 6.546009]@3 msm_eeprom_imx298_read_vendorInfo pdaf calibration is valid
859[ 6.546043]@3 qcom,slave-addr = 0xA0
860[ 6.555077]@3 qcom,slave-addr = 0xA0
861[ 6.564112]@3 qcom,slave-addr = 0xA0
862[ 6.573155]@3 qcom,slave-addr = 0xA0
863[ 6.582207]@3 qcom,slave-addr = 0xA0
864[ 6.591251]@3 qcom,slave-addr = 0xA0
865[ 6.600311]@3 qcom,slave-addr = 0xA0
866[ 6.609368]@3 qcom,slave-addr = 0xA0
867[ 6.618412]@3 qcom,slave-addr = 0xA0
868[ 6.642065]@0 msm_cci_init:1374: hw_version = 0x10040000
869[ 6.642111]@0 qcom,slave-addr = 0x20
870[ 6.650068]@0 qcom,slave-addr = 0x20
871[ 6.663361]@0 qcom,slave-addr = 0x20
872[ 6.676703]@0 qcom,slave-addr = 0x20
873[ 6.686702]@0 qcom,slave-addr = 0x20
874[ 6.696702]@0 qcom,slave-addr = 0x20
875[ 6.706702]@0 qcom,slave-addr = 0x20
876[ 6.716703]@0 qcom,slave-addr = 0x20
877[ 6.726702]@0 qcom,slave-addr = 0x20
878[ 6.729032]@0 qcom,slave-addr = 0x20
879[ 6.736702]@0 qcom,slave-addr = 0x20
880[ 6.739032]@0 qcom,slave-addr = 0x20
881[ 6.746701]@0 qcom,slave-addr = 0x20
882[ 6.751971]@0 msm_camera_pinctrl_init:1197 Getting pinctrl handle failed
883[ 6.751986]@0 msm_ois_platform_probe:938 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
884[ 6.752139]@0 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
885[ 6.765270]@2 MSM-CPP cpp_init_hardware:864 CPP HW Version: 0x60000000
886[ 6.765279]@2 MSM-CPP cpp_init_hardware:882 stream_cnt:0
887[ 6.776706]@0 synaptics,s3320: after on cpu [0]
888[ 6.776718]@0 synaptics,s3320: synaptics_ts_probe is called
889[ 6.777080]@0 synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
890[ 6.777092]@0 synaptics,s3320: synaptics,tx-rx-num is 16 28
891[ 6.777099]@0 synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
892[ 6.777595]@0 touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0
893[ 6.777605]@0 touchkey,s1302: synaptics_ts_probe is called
894[ 6.777878]@3 __msm_jpeg_init:1537] Jpeg Device id 0
895__msm_jpeg_init:1537] Jpeg Device id 2
896__msm_jpeg_init:1537] Jpeg Device id 3
897msm_fd_hw_set_dt_parms_by_name: Error property does not exist
898[ 6.940546]@0 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1a (ok)
899synaptics,s3320: F12_2D_QUERY_BASE = 50
900 F12_2D_CMD_BASE = 0
901 F12_2D_CTRL_BASE = 15
902 F12_2D_DATA_BASE = 8
903
904synaptics,s3320: F34_FLASH_QUERY_BASE = 2b
905 F34_FLASH_CMD_BASE = 0
906 F34_FLASH_CTRL_BASE = d
907 F34_FLASH_DATA_BASE = 0
908
909synaptics,s3320: F54_QUERY_BASE = 4d
910 F54_CMD_BASE = 4c
911 F54_CTRL_BASE = e
912 F54_DATA_BASE = 0
913
914synaptics,s3320: before fw update bootloader_mode[0x0]
915[ 6.942721]@0 synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15801127
916[ 6.943427]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
917[ 6.945043]@0 synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919
918[ 6.945658]@0 synaptics,s3320: synaptics_soft_reset !!!
919[ 6.983368]@3 msm_fd aa4000.qcom,fd: Face detection halt timeout
920[ 6.985928]@3 SMBCHG: load_data: chip is NULL !
921[ 6.986272]@3 SMBCHG: load_data: chip is NULL !
922[ 6.986377]@3 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
923[ 6.986955]@2 BQ: bq27541_battery_probe: probe sucdess
924[ 6.987369]@2 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1b (ok)
925BQ: check_4p4v_bat_present: err bq dcap_l value:0xff0b
926[ 6.988371]@2 BQ: check_bat_type: is_4p4v_bat=0,support_4p4v_bat=0
927[ 6.988410]@2 i2c-core: driver [bq27541-battery] using legacy suspend method
928[ 6.988412]@2 i2c-core: driver [bq27541-battery] using legacy resume method
929[ 6.989113]@2 FASTCHG: dash_probe: dash_probe
930[ 7.013379]@2 FASTCHG: dash_probe: dash_probe success
931[ 7.015443]@2 unable to find DT imem DLOAD mode node
932[ 7.016842]@2 unable to find DT imem EDLOAD mode node
933[ 7.017829]@2 set_dload_mode ON
934[ 7.049273]@3 device-mapper: uevent: version 1.0.3
935[ 7.049416]@3 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
936[ 7.049509]@3 device-mapper: req-crypt: dm-req-crypt successfully initalized.
937
938[ 7.051003]@3 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
939[ 7.051145]@3 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
940[ 7.051150]@3 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
941[ 7.051153]@3 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
942[ 7.051853]@3 sdhci: Secure Digital Host Controller Interface driver
943[ 7.051857]@3 sdhci: Copyright(c) Pierre Ossman
944[ 7.051860]@3 sdhci-pltfm: SDHCI platform and OF driver helper
945[ 7.056541]@3 hidraw: raw HID events driver (C) Jiri Kosina
946[ 7.057310]@3 usbcore: registered new interface driver usbhid
947[ 7.057313]@3 usbhid: USB HID core driver
948[ 7.057659]@3 ashmem: initialized
949[ 7.060532]@3 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
950[ 7.067707]@3 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
951[ 7.068824]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
952[ 7.068857]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
953[ 7.071104]@3 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
954[ 7.074789]@3 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
955[ 7.074898]@3 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
956[ 7.074997]@3 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
957[ 7.075094]@3 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
958[ 7.075991]@3 devfreq soc:qcom,m4m: Couldn't update frequency transition information.
959[ 7.078802]@3 otracer: initialized
960[ 7.078922]@3 op_netlink_init
961[ 7.079022]@3 usbcore: registered new interface driver snd-usb-audio
962[ 7.081431]@3 tfa98xx_i2c_probe
963[ 7.090294]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
964[ 7.090547]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
965[ 7.090554]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
966[ 7.090687]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
967[ 7.090694]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
968[ 7.090821]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
969[ 7.090828]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
970[ 7.090952]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
971[ 7.090958]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
972[ 7.090976]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
973[ 7.091096]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
974[ 7.091103]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
975[ 7.091231]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
976[ 7.091237]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
977[ 7.091363]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
978[ 7.091369]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
979[ 7.091493]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
980[ 7.091499]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
981[ 7.091516]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
982[ 7.091637]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
983[ 7.091643]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
984[ 7.091768]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
985[ 7.091774]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
986[ 7.091899]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
987[ 7.091905]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
988[ 7.092028]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
989[ 7.092034]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
990[ 7.092051]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
991[ 7.092177]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
992[ 7.092183]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
993[ 7.092307]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
994[ 7.092313]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
995[ 7.092437]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
996[ 7.092443]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
997[ 7.092565]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
998[ 7.092572]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
999[ 7.094757]@3 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1000[ 7.103309]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1001[ 7.103682]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1002[ 7.105243]@3 GACT probability NOT on
1003[ 7.105255]@3 Mirror/redirect action on
1004[ 7.105270]@3 u32 classifier
1005[ 7.105272]@3 Actions configured
1006[ 7.105289]@3 Netfilter messages via NETLINK v0.30.
1007[ 7.105316]@3 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1008[ 7.105488]@3 ctnetlink v0.93: registering with nfnetlink.
1009[ 7.105815]@3 xt_time: kernel timezone is -0000
1010[ 7.105946]@3 ip_tables: (C) 2000-2006 Netfilter Core Team
1011[ 7.106010]@3 arp_tables: (C) 2002 David S. Miller
1012[ 7.106031]@3 TCP: cubic registered
1013[ 7.106035]@3 TCP: westwood registered
1014[ 7.106038]@3 TCP: htcp registered
1015[ 7.106041]@3 Initializing XFRM netlink socket
1016[ 7.106196]@3 NET: Registered protocol family 10
1017[ 7.106725]@3 mip6: Mobile IPv6
1018[ 7.106738]@3 ip6_tables: (C) 2000-2006 Netfilter Core Team
1019[ 7.106803]@3 sit: IPv6 over IPv4 tunneling driver
1020[ 7.107011]@3 NET: Registered protocol family 17
1021[ 7.107024]@3 NET: Registered protocol family 15
1022[ 7.107048]@3 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1023[ 7.107062]@3 Bridge firewalling registered
1024[ 7.107066]@3 Ebtables v2.0 registered
1025[ 7.107229]@3 Bluetooth: ffffffc1764b3d10
1026Bluetooth: ffffffc1764b3d00
1027Bluetooth: ffffffc1764b3d30
1028Bluetooth: ffffffc1764b3d10
1029Bluetooth: ffffffc1764b3d10
1030Bluetooth: ffffffc1764b3cf0
1031Bluetooth: ffffffc1764b3d50
1032Bluetooth: ffffffc1764b3d40
1033l2tp_core: L2TP core driver, V2.0
1034[ 7.107298]@3 l2tp_ppp: PPPoL2TP kernel driver, V2.0
1035[ 7.107302]@3 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1036[ 7.107315]@3 l2tp_netlink: L2TP netlink interface
1037[ 7.107330]@3 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1038[ 7.107341]@3 l2tp_debugfs: L2TP debugfs support
1039[ 7.107345]@3 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1040[ 7.108143]@3 NET: Registered protocol family 27
1041[ 7.111818]@0 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1042synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x47 !
1043[ 7.112694]@0 input: synaptics as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input3
1044[ 7.113792]@0 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1045pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1046[ 7.116163]@0 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1047sps:BAM 0x0000000006b04000 is registered.
1048qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1049[ 7.120873]@2 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
1050[ 7.120940]@2 smbcharger_charger_otg: no parameters
1051[ 7.121031]@2 smbcharger_external_otg: no parameters
1052[ 7.121047]@2 smbcharger_external_otg: supplied by pmi8994_boost_5v
1053[ 7.121112]@2 SMBCHG: smbchg_hw_init: enable APSD
1054[ 7.121159]@2 SMBCHG: smbchg_hw_init: disabe HVDCP
1055[ 7.121401]@2 SMBCHG: smbchg_charging_en: enable=1
1056[ 7.121514]@2 SMBCHG: smbchg_charging_en: enable=0
1057[ 7.121539]@2 SMBCHG: smbchg_usb_suspend: suspend=0
1058[ 7.121997]@2 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 500, set to 500
1059[ 7.143891]@0 SMBCHG: handle_usb_insertion: inserted type = 5 (DCP)
1060[ 7.143897]@0 SMBCHG: smbchg_charging_en: enable=1
1061[ 7.143924]@0 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail
1062[ 7.143929]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
1063[ 7.144305]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1064[ 7.144408]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1065[ 7.144589]@0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 1500
1066[ 7.144598]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = -22, online = 1
1067[ 7.161196]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1068[ 7.161651]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1069[ 7.161750]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1070[ 7.161870]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1071[ 7.163469]@0 synaptics,s3320: synaptic:ts->irq is 389
1072[ 7.164105]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1073[ 7.164705]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1074[ 7.165043]@0 qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1075[ 7.165116]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1076[ 7.165157]@0 SMBCHG: set_chg_ibat_vbat_max: vote ibatmax = 1910 and set vbatmax = 4320
1077[ 7.165206]@0 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1910, set to 1900
1078[ 7.165675]@0 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
1079[ 7.165733]@0 SMBCHG: smbchg_external_power_changed: change usb_target_current_ma = 1500
1080[ 7.165737]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1500, typeC_support_current_ma = 4000
1081[ 7.165863]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1082[ 7.165941]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1083[ 7.166041]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1084[ 7.166993]@0 qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1085[ 7.168830]@0 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1086[ 7.169559]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1087[ 7.169992]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1088[ 7.170470]@0 tusb320 7-0060: tusb320_probe
1089[ 7.170869]@0 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x23 (ok)
1090i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010
1091[ 7.171035]@0 tusb320_read_reg:reg(0x0), ret(-107)
1092[ 7.171040]@0 tusb320 7-0060: DEV_ID(0x0)!= 0x30
1093[ 7.171051]@0 tusb320: probe of 7-0060 failed with error -22
1094[ 7.171106]@0 fusb301 7-0021: fusb301_probe
1095[ 7.171427]@0 fusb301 7-0021: fusb301_gpio_configure OK!
1096[ 7.172090]@0 fusb301 7-0021: fusb301_probe OK!
1097[ 7.172153]@0 ptn5150 7-001d: ptn5150_probe
1098[ 7.172209]@0 i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1343c8 OPER:0x00000010
1099[ 7.172237]@0 ptn5150_read_reg: i2c read error: -5
1100[ 7.172241]@0 ptn5150 7-001d: DEV_ID(0x00)!= 0x0b || 0x09
1101[ 7.172250]@0 ptn5150: probe of 7-001d failed with error -22
1102[ 7.174145]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1103[ 7.174491]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1104[ 7.177340]@0 synaptics,s3320: synaptics_ts_probe 3203: normal end
1105[ 7.194096]@3 project_info_init_sysfs success
1106[ 7.194537]@3 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1107adsprpc: channel link type: 0
1108[ 7.203800]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1109[ 7.204232]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1110[ 7.205719]@3 RNDIS_IPA module is loaded.
1111file system registered
1112[ 7.206486]@3 mbim_init: initialize 1 instances
1113[ 7.206519]@3 mbim_init: Initialized 1 ports
1114[ 7.207317]@3 rndis_qc_init: initialize rndis QC instance
1115[ 7.207421]@3 Number of LUNs=8
1116[ 7.207427]@3 Mass Storage Function, version: 2009/09/11
1117[ 7.207430]@3 LUN: removable file: (no medium)
1118[ 7.207439]@3 Number of LUNs=1
1119[ 7.207442]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1120[ 7.207463]@3 LUN: removable read only CD-ROM file: (no medium)
1121[ 7.207465]@3 Number of LUNs=1
1122[ 7.207585]@3 android_usb gadget: android_usb ready
1123[ 7.207903]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1124[ 7.209189]@3 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
1125[ 7.210252]@3 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-07-29 12:02:50 UTC (18100970)
1126[ 7.210407]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1127[ 7.210878]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1128[ 7.212063]@3 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1129[ 7.213601]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1130[ 7.213964]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1131[ 7.215744]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1132[ 7.216097]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1133[ 7.218599]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1134[ 7.218955]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1135[ 7.219444]@0 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1136[ 7.219704]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1137[ 7.219832]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1138[ 7.219946]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1139[ 7.220084]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1140[ 7.220197]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1141[ 7.220308]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1142[ 7.220417]@2 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1143[ 7.222765]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1144[ 7.223131]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1145[ 7.223135]@2 parse_cpu_levels: idx 1 545
1146[ 7.223139]@2 parse_cpu_levels: idx 2 6022
1147[ 7.223141]@2 parse_cpu_levels: idx 2 11499
1148[ 7.223176]@2 parse_cpu_levels: idx 1 545
1149[ 7.223178]@2 parse_cpu_levels: idx 2 6022
1150[ 7.223180]@2 parse_cpu_levels: idx 2 11499
1151[ 7.226353]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1152[ 7.226755]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1153[ 7.227101]@2 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
1154[ 7.229148]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1155[ 7.229316]@2 rmnet_ipa started initialization
1156[ 7.229321]@2 IPA SSR support = True
1157[ 7.229332]@2 IPA ipa-loaduC = True
1158[ 7.229334]@2 IPA SG support = True
1159[ 7.229506]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1160[ 7.230960]@3 ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1161[ 7.230966]@3 ipa ipa2_uc_state_check:301 uC is not loaded
1162[ 7.231727]@3 rmnet_ipa completed initialization
1163[ 7.233311]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1164[ 7.233710]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1165[ 7.236703]@3 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1166[ 7.237924]@3 wlan_en_vreg: disabling
1167[ 7.237929]@3 rome_vreg: disabling
1168[ 7.237931]@3 gdsc_mmagic_bimc: disabling
1169[ 7.237967]@3 kryo1-retention: disabling
1170[ 7.237970]@3 kryo0-retention: disabling
1171[ 7.237972]@3 gfx_mem_acc_corner: disabling
1172[ 7.237974]@3 apcc_l3_mem_acc_corner: disabling
1173[ 7.237976]@3 apc1_perfcl_mem_acc_corner: disabling
1174[ 7.237978]@3 apc0_pwrcl_mem_acc_corner: disabling
1175[ 7.237984]@3 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1176[ 7.238248]@3 clock_late_init: Removing enables held for handed-off clocks
1177[ 7.238303]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1178[ 7.238644]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1179[ 7.240522]@2 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1180[ 7.240608]@2 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1181[ 7.240707]@2 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1182[ 7.241516]@3 ALSA device list:
1183[ 7.241519]@3 No soundcards found.
1184[ 7.243442]@2 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1185[ 7.293773]@0 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x25 (ok)
1186touchkey,s1302: product id is s1302
1187[ 7.294661]@0 touchkey,s1302: F11_2D_QUERY_BASE = 95
1188 F11_2D_CMD_BASE = 6e
1189 F11_2D_CTRL_BASE = 3d
1190 F11_2D_DATA_BASE = 15
1191
1192touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4
1193[ 7.296118]@0 touchkey,s1302: before fw update,bootloader_mode = 0x0
1194[ 7.296237]@0 input: synaptics as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input5
1195[ 7.373360]@0 touchkey,s1302: synaptic:ts->irq is 396
1196[ 7.373480]@0 touchkey,s1302: touchkey using poll status:0
1197[ 7.373744]@0 touchkey,s1302: synaptics_soft_reset !!!
1198[ 7.373773]@0 touchkey,s1302: create nodes is successe!
1199[ 7.373848]@0 touchkey,s1302: synaptics_ts_probe s1302: normal end
1200[ 7.373851]@0 touchkey,s1302: boot_time: synaptics_ts_probe return 0
1201[ 7.998303]@2 BQ: bq27541_hw_config: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
1202[ 7.998307]@2 BQ: bq27541_hw_config: Complete bq27541 configuration 0x604B
1203[ 9.148758]@2 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1204[ 9.157020]@2 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1205[ 9.165503]@2 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1206[ 9.174054]@2 ufs_get_capacity_info size = 0x7734000
1207scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1208[ 9.185941]@1 scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1209[ 9.193934]@3 scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1210[ 9.202137]@3 scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1211[ 9.210391]@3 scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1212[ 9.219911]@3 scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
1213[ 9.230217]@2 sd 0:0:0:1: [sdb] 16384-byte physical blocks
1214[ 9.230987]@3 sd 0:0:0:3: [sdd] 16384-byte physical blocks
1215[ 9.231599]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1216[ 9.232034]@1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1217[ 9.232252]@3 sd 0:0:0:3: [sdd] 16384-byte physical blocks
1218[ 9.233982]@3 sdd: sdd1 sdd2 sdd3
1219[ 9.234160]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
1220[ 9.234545]@3 sd 0:0:0:3: [sdd] 16384-byte physical blocks
1221[ 9.235047]@1 sd 0:0:0:4: [sde] 16384-byte physical blocks
1222[ 9.235149]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1223[ 9.235831]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1224[ 9.236499]@3 sd 0:0:0:5: [sdf] 16384-byte physical blocks
1225[ 9.236910]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
1226[ 9.237865]@3 sd 0:0:0:4: [sde] 16384-byte physical blocks
1227[ 9.239338]@3 sd 0:0:0:5: [sdf] 16384-byte physical blocks
1228[ 9.240168]@3 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
1229[ 9.240395]@1 sd 0:0:0:2: [sdc] 16384-byte physical blocks
1230[ 9.241424]@3 sd 0:0:0:0: [sda] 16384-byte physical blocks
1231[ 9.242422]@0 sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34
1232[ 9.243056]@3 sd 0:0:0:2: [sdc] 16384-byte physical blocks
1233[ 9.244894]@1 sdc: sdc1
1234[ 9.245357]@3 sd 0:0:0:2: [sdc] 16384-byte physical blocks
1235[ 9.245374]@0 sd 0:0:0:4: [sde] 16384-byte physical blocks
1236[ 9.255814]@3 sdf: sdf1 sdf2 sdf3 sdf4
1237[ 9.256278]@3 sd 0:0:0:5: [sdf] 16384-byte physical blocks
1238[ 9.387878]@3 sd 0:0:0:1: [sdb] 16384-byte physical blocks
1239[ 9.394023]@3 sdb: sdb1
1240[ 9.395887]@3 sd 0:0:0:1: [sdb] 16384-byte physical blocks
1241[ 9.402208]@1 Freeing unused kernel memory: 460K (ffffffc001447000 - ffffffc0014ba000)
1242[ 9.409163]@1 Freeing alternatives memory: 80K (ffffffc0014ba000 - ffffffc0014ce000)
1243[ 9.423927]@0 SELinux: security_load_policy, ss_initialized: 0
1244[ 9.430482]@0 SELinux: Android master kernel running Android M policy in compatibility mode.
1245[ 9.438988]@3 SELinux: Permission module_load in class system not defined in policy.
1246[ 9.445973]@3 SELinux: Permission audit_read in class capability2 not defined in policy.
1247[ 9.453967]@3 SELinux: Class can_socket not defined in policy.
1248[ 9.459858]@3 SELinux: the above unknown classes and permissions will be denied
1249[ 9.500084]@2 SELinux: security_load_policy, sidtab.shutdown: 0
1250[ 9.507882]@2 audit: type=1403 audit(18100972.796:2): policy loaded auid=4294967295 ses=4294967295
1251[ 9.881782]@2 audit: type=1400 audit(18100973.170:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1252[ 9.897793]@2 audit: type=1400 audit(18100973.186:4): avc: denied { setcurrent } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1253[ 9.913364]@2 audit: type=1400 audit(18100973.200:5): avc: denied { dyntransition } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1254[ 9.966893]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:62
1255[ 9.974503]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:62
1256[ 9.983112]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:62
1257[ 9.991685]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:62
1258[ 10.100253]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:48
1259[ 10.107859]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:48
1260[ 10.116451]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:48
1261[ 10.125044]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:48
1262[ 10.178497]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 22
1263[ 10.183428]@2 BQ: bq27541_battery_soc: bq27541_battery_soc = 22
1264[ 10.183449]@2 SMBCHG: load_data: stored_soc[0x2d], shutdown_soc[22]
1265[ 10.183452]@2 BQ: fg_soc_calibrate: soc=22, soc_load=22
1266[ 10.513568]@3 of_batterydata_get_best_profile: OP_3000mah found
1267[ 10.528023]@3 FG: fg_batt_profile_init: Battery SOC: 25, V: 3849922uV
1268[ 10.882820]@1 enable_store: android_usb: already disabled
1269[ 10.887417]@1 functions_store: android_usb: functions_store'adb'
1270[ 10.893296]@3 audit: type=1400 audit(18100974.180:6): avc: denied { write } for pid=437 comm="setup_decrypt" name="kmsg" dev="tmpfs" ino=15951 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
1271[ 10.894849]@1 audit: type=1400 audit(18100974.183:7): avc: denied { execute_no_trans } for pid=439 comm="init" path="/sbin/recovery" dev="rootfs" ino=8902 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1272[ 10.894859]@2 touchkey,s1302: synaptics_s1302_virtual_key_enable_write 0virtual key :1
1273[ 10.894932]@2 functions_store: android_usb: functions_store'mtp,adb'
1274[ 10.897446]@2 ep0_open success!
1275[ 10.897455]@2 read descriptors
1276[ 10.897461]@2 read strings
1277[ 10.897478]@2 mtp_bind_config
1278[ 10.897486]@2 mtp_create_bulk_endpoints: useFixAddr:false
1279[ 10.902790]@2 audit: type=1400 audit(18100974.190:8): avc: denied { write } for pid=444 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1280[ 10.911190]@2 audit: type=1400 audit(18100974.200:9): avc: denied { append } for pid=439 comm="recovery" path="/tmp/recovery.log" dev="tmpfs" ino=16142 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
1281[ 10.911273]@2 audit: type=1400 audit(18100974.200:10): avc: denied { write } for pid=439 comm="recovery" name="property_service" dev="tmpfs" ino=15646 scontext=u:r:init:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
1282[ 10.912149]@2 audit: type=1400 audit(18100974.200:11): avc: denied { write } for pid=439 comm="recovery" name="fb0" dev="tmpfs" ino=16082 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
1283[ 10.922933]@2 mdss_dsi_on start
1284[ 10.922939]@2 get_param_by_index_and_offset[75] sid_index = 2 offset = 32 buf = ffffffc0b631cf40 length = 4
1285[ 10.923501]@2 sRGB Mode On.
1286[ 10.923504]@2 get_param_by_index_and_offset[75] sid_index = 2 offset = 36 buf = ffffffc0b631cf88 length = 4
1287[ 10.923507]@2 mdss_dsi_on:srgb mode 0
1288[ 10.923509]@2 get_param_by_index_and_offset[75] sid_index = 2 offset = 40 buf = ffffffc0b631cfd0 length = 4
1289[ 10.923512]@2 mdss_dsi_on:srgb mode 0
1290[ 10.923516]@2 mdss_dsi_on end
1291[ 11.094522]@2 setup_decrypt: Mounting /system read-only
1292[ 11.107932]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: (null)
1293[ 11.129457]@3 setup_decrypt: Copying decryption libraries from /system
1294[ 11.159914]@3 random: sed urandom read with 118 bits of entropy available
1295[ 11.167743]@2 mdss_dsi_off start
1296[ 11.182501]@3 setup_decrypt: Using system decryption libraries!
1297[ 11.195466]@3 mdss_dsi_off end
1298[ 11.200194]@2 mdss_dsi_on start
1299[ 11.234950]@2 mdss_dsi_on end
1300[ 11.258397]@2 sRGB Mode On.
1301[ 11.260737]@2 --------backlight level = 127---------
1302[ 11.273989]@2 blank off start
1303[ 11.274822]@2 synaptics,s3320: enter gesture mode
1304[ 11.274928]@2 --------backlight level = 0---------
1305[ 11.487937]@2 mdss_dsi_off start
1306[ 11.493549]@3 random: nonblocking pool is initialized
1307[ 11.493599]@3 switch_dev_work ,tristate set to state(3)
1308[ 11.513393]@3 mdss_dsi_off end
1309[ 11.514155]@3 blank off end
1310[ 11.544917]@2 blank on start
1311[ 11.547321]@2 mdss_dsi_on start
1312[ 11.568792]@3 sps: BAM device 0x0000000007584000 is not registered yet.
1313[ 11.568969]@3 sps:BAM 0x0000000007584000 is registered.
1314sps:BAM 0x0000000007584000 (va:0xffffff8006580000) enabled: ver:0x19, number of pipes:24
1315[ 11.579967]@2 mdss_dsi_on end
1316[ 11.601429]@2 sRGB Mode On.
1317[ 11.601996]@2 --------backlight level = 127---------
1318[ 11.603101]@2 BQ: bq27541_set_lcd_off_status: off=0
1319[ 11.603325]@3 blank on end
1320[ 11.603800]@2 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1321[ 11.656095]@2 mdss_dsi_post_panel_on:+
1322[ 11.660310]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x47 !
1323[ 11.663450]@2 mdss_dsi_post_panel_on:-
1324[ 11.678619]@3 blank off start
1325[ 11.679181]@3 synaptics,s3320: enter gesture mode
1326[ 11.679278]@3 --------backlight level = 0---------
1327[ 11.912804]@0 mdss_dsi_off start
1328[ 11.938311]@0 mdss_dsi_off end
1329[ 11.939373]@0 BQ: bq27541_set_lcd_off_status: off=1
1330[ 11.940973]@1 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=22,soc_pre=22
1331[ 11.941280]@1 blank off end
1332[ 11.974126]@2 blank on start
1333[ 11.976525]@3 mdss_dsi_on start
1334[ 12.009159]@2 mdss_dsi_on end
1335[ 12.030621]@0 sRGB Mode On.
1336[ 12.031238]@0 --------backlight level = 127---------
1337[ 12.032387]@0 BQ: bq27541_set_lcd_off_status: off=0
1338[ 12.032624]@0 blank on end
1339[ 12.048320]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1340[ 12.090307]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x47 !
1341[ 12.173372]@0 SMBCHG: smbchg_re_det_chg_type: Re-detect charger type
1342[ 12.178707]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 300, typeC_support_current_ma = 4000
1343[ 12.188178]@0 SMBCHG: smbchg_re_det_chg_type: Faking Removal
1344[ 12.193878]@3 SMBCHG: usbin_uv_handler: triggered
1345[ 12.193948]@0 SMBCHG: src_detect_handler: chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
1346[ 12.193963]@0 SMBCHG: handle_usb_removal: triggered
1347[ 12.194625]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 1, online = 0
1348[ 12.221878]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 aicl = 300
1349[ 12.223144]@3 mdss_dsi_post_panel_on:+
1350[ 12.240548]@0 msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1351[ 12.240556]@0 msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1352[ 12.241493]@3 mdss_dsi_post_panel_on:-
1353[ 12.241569]@0 msm-dwc3 6a00000.ssusb: DWC3 in low power mode
1354[ 12.289053]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1355[ 12.295604]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1356[ 12.304959]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1357[ 12.311593]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1358[ 12.319063]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1359[ 12.326623]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1360[ 12.334075]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1361[ 12.341705]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1362[ 12.349440]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1363[ 12.356723]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1364[ 12.366999]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1365[ 12.373639]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1366[ 12.381094]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1367[ 12.388652]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1368[ 12.396113]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1369[ 12.403751]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1370[ 12.416871]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1371[ 12.423418]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1372[ 12.432678]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1373[ 12.439312]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1374[ 12.446774]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1375[ 12.454321]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1376[ 12.461795]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1377[ 12.469423]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1378[ 12.478834]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1379[ 12.485383]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1380[ 12.495878]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1381[ 12.502510]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1382[ 12.509980]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe44b518)
1383[ 12.517534]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1384[ 12.524989]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x37525efa)
1385[ 12.532627]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1386[ 12.548137]@3 EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
1387[ 12.556178]@3 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
1388[ 12.574818]@2 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
1389[ 12.723371]@0 SMBCHG: smbchg_re_det_chg_type: Faking Insertion
1390[ 12.728385]@2 SMBCHG: usbin_uv_handler: triggered
1391[ 12.732889]@2 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 aicl = 300
1392[ 13.580987]@0 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1393[ 13.590799]@0 SMBCHG: handle_usb_insertion: inserted type = 5 (DCP)
1394[ 13.596922]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:64
1395[ 13.596929]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:64
1396[ 13.596932]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:64
1397[ 13.596935]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:64
1398[ 13.631376]@0 SMBCHG: smbchg_charging_en: enable=1
1399[ 13.636323]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
1400[ 13.645823]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 1
1401[ 13.673399]@1 oem_test_id ret:1, otg_switch:1, otg_state:1
1402[ 13.703593]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:48
1403[ 13.711213]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:48
1404[ 13.719805]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:48
1405[ 13.728396]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:48
1406[ 15.200056]@0 synap rmidev_create_attr
1407[ 15.386724]@0 synap rmidev_create_attr
1408[ 16.305754]@2 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
1409[ 16.313796]@2 get_ice_device_from_storage_type: found ice device ffffffc173cb1200
1410[ 16.409623]@2 get_ice_device_from_storage_type: found ice device ffffffc173cb1200
1411[ 16.416431]@2 QSEECOM: qseecom_create_key: Set the key successfully
1412[ 16.423225]@0 device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/sda15 to dm-req-crypt ok!
1413
1414[ 16.433106]@3 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1415[ 16.449276]@3 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1416[ 16.546801]@3 msm_thermal:do_core_control Set Offline: CPU3 Temp: 74
1417[ 16.567390]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:74
1418[ 16.575008]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:74
1419[ 16.583588]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:74
1420[ 16.592172]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:74
1421[ 16.700147]@1 msm_thermal:do_core_control Allow Online CPU3 Temp: 51
1422[ 16.903643]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:47
1423[ 16.911380]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:47
1424[ 16.919837]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:47
1425[ 16.928436]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:47
1426[ 17.814068]@2 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1427[ 17.820632]@2 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1428[ 17.919706]@3 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1429[ 17.926280]@3 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1430[ 18.037542]@0 SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
1431[ 18.046829]@1 SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
1432[ 18.055090]@2 SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
1433[ 18.064060]@2 SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
1434[ 18.073509]@2 SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
1435[ 18.082711]@2 SELinux: Context u:object_r:user_profile_foreign_dex_data_file:s0 is not valid (left unmapped).
1436[ 18.123170]@2 SELinux: Context u:object_r:user_profile_foreign_dex_data_file:s0:c512,c768 is not valid (left unmapped).
1437[ 18.659550]@1 SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
1438[ 18.669082]@1 SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped).
1439[ 18.678891]@2 SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
1440[ 18.689138]@2 SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped).
1441[ 18.697340]@2 SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
1442[ 18.710924]@2 SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
1443[ 18.719306]@2 SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1444[ 18.728021]@2 SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
1445[ 18.739682]@2 SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
1446[ 18.747259]@2 SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped).
1447[ 18.757560]@3 SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped).
1448[ 18.767277]@3 SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1449[ 18.775317]@3 SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
1450[ 18.784651]@3 SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
1451[ 18.793283]@3 SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
1452[ 18.802231]@3 SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
1453[ 18.811583]@3 SELinux: Context u:object_r:wapi_data_file:s0 is not valid (left unmapped).
1454[ 18.819340]@3 SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
1455[ 18.827494]@3 SELinux: Context u:object_r:seemp_file:s0 is not valid (left unmapped).
1456[ 18.835889]@3 SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
1457[ 18.843731]@3 SELinux: Context u:object_r:qvop_data_file:s0 is not valid (left unmapped).
1458[ 18.851992]@3 SELinux: Context u:object_r:qvrd_data_file:s0 is not valid (left unmapped).
1459[ 18.860229]@3 SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped).
1460[ 18.868815]@3 SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
1461[ 18.884929]@3 SELinux: Context u:object_r:sensors_data_file:s0 is not valid (left unmapped).
1462[ 18.895281]@3 audit_printk_skb: 69 callbacks suppressed
1463[ 18.899485]@3 audit: type=1400 audit(18100982.183:35): avc: denied { getattr } for pid=439 comm="recovery" path="/data/data/com.oneplus.calculator" dev="dm-0" ino=15105 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1
1464[ 18.922804]@3 audit: type=1400 audit(18100982.210:36): avc: denied { read } for pid=439 comm="recovery" name="com.oneplus.calculator" dev="dm-0" ino=15105 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1
1465[ 18.944823]@3 audit: type=1400 audit(18100982.233:37): avc: denied { open } for pid=439 comm="recovery" path="/data/data/com.oneplus.calculator" dev="dm-0" ino=15105 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1
1466[ 18.969772]@3 audit: type=1400 audit(18100982.256:38): avc: denied { search } for pid=439 comm="recovery" name="com.oneplus.calculator" dev="dm-0" ino=15105 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1
1467[ 18.994234]@3 audit: type=1400 audit(18100982.283:39): avc: denied { getattr } for pid=439 comm="recovery" path="/data/data/net.oneplus.weather/shared_prefs/setting.xml" dev="dm-0" ino=88172 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=file permissive=1
1468[ 19.361700]@0 SMBCHG: qpnp_check_charger_uovp: charger is over voltage, count=0
1469[ 19.368263]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=1, pre_uovp_satus=0, over_volt_count=0
1470[ 19.393784]@0 SMBCHG: update_heartbeat: inserted charger type = 5 (DCP), charger_type = 5
1471[ 19.408432]@0 SMBCHG: update_heartbeat: charger_type:5,bat_voltage:3808,charger_voltage:4107,current:-773,temp:324,capacity:22
1472[ 19.778804]@1 SELinux: Context u:object_r:qsee_svc_app_data_file:s0 is not valid (left unmapped).
1473[19700729_12:03:03.587510]@1 audit: type=1400 audit(18100983.586:40): avc: denied { getattr } for pid=439 comm="recovery" path="/data/data/com.android.chrome/lib" dev="dm-0" ino=103937 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=lnk_file permissive=1
1474[19700729_12:03:05.476884]@0 get_param_by_index_and_offset[75] sid_index = 7 offset = 24 buf = ffffffc0b51e3d10 length = 4
1475[19700729_12:03:05.486784]@0 SMBCHG: charger_type_record: charger_type_record: charger_type_record: param_value = 19700729_12:03:05|3,dash_present=0
1476[19700729_12:03:05.499820]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 88 buf = ffffffc0b51e3d70 length = 4
1477[19700729_12:03:05.510555]@0 audit: type=1400 audit(18100985.510:41): avc: denied { read write } for pid=362 comm="kworker/0:3" name="sda11" dev="tmpfs" ino=15713 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1478[19700729_12:03:05.532692]@0 audit: type=1400 audit(18100985.530:42): avc: denied { open } for pid=362 comm="kworker/0:3" path="/dev/block/sda11" dev="tmpfs" ino=15713 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1479[19700729_12:03:05.556018]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 92 buf = ffffffc0b51e3d74 length = 4
1480[19700729_12:03:05.566451]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 96 buf = ffffffc0b51e3d78 length = 4
1481[19700729_12:03:05.577121]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 100 buf = ffffffc0b51e3d7c length = 4
1482[19700729_12:03:05.587873]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 104 buf = ffffffc0b51e3d80 length = 4
1483[19700729_12:03:05.598627]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 24 buf = ffffffc0b51e3d10 length = 4
1484[19700729_12:03:08.651851]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 23
1485[19700729_12:03:08.658040]@0 SMBCHG: qpnp_check_charger_uovp: charger is over voltage, count=0
1486[19700729_12:03:08.666415]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=1, pre_uovp_satus=1, over_volt_count=1
1487[19700729_12:03:11.255741]@3 audit: type=1400 audit(18100991.253:43): avc: denied { getattr } for pid=439 comm="recovery" path="/data/data/pl.wp.programtv/files/default.realm.management/access_control.new_commit.cv" dev="dm-0" ino=72176 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=fifo_file permissive=1
1488[19700729_12:03:14.652000]@0 SMBCHG: qpnp_check_charger_uovp: charger is over voltage, count=1
1489[19700729_12:03:14.659672]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=1, pre_uovp_satus=1, over_volt_count=2
1490[19700729_12:03:17.065205]@1 SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
1491[19700729_12:03:17.108853]@1 SELinux: Context u:object_r:icon_file:s0 is not valid (left unmapped).
1492[19700729_12:03:17.119322]@1 SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1493[19700729_12:03:17.129131]@1 SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1494[19700729_12:03:17.171512]@3 SELinux: Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
1495[19700729_12:03:17.546715]@1 audit: type=1400 audit(18100997.543:44): avc: denied { getattr } for pid=439 comm="recovery" path="/data/user_de/0/eu.chainfire.supersu/logs/L14853266860000.GRANTED.com.justgetflux.flux" dev="dm-0" ino=104433 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=file permissive=1
1496[19700729_12:03:17.726771]@1 SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1497[19700729_12:03:17.736521]@3 SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
1498[19700729_12:03:17.747245]@3 SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
1499[19700729_12:03:17.761788]@3 SELinux: Context u:object_r:oem_data_file:s0 is not valid (left unmapped).
1500[19700729_12:03:17.771487]@3 SELinux: Context u:object_r:fpc_images_file:s0 is not valid (left unmapped).
1501[19700729_12:03:17.781458]@2 SELinux: Context u:object_r:fpc_data_file:s0 is not valid (left unmapped).
1502[19700729_12:03:17.790779]@2 SELinux: Context u:object_r:coredump_data_file:s0 is not valid (left unmapped).
1503[19700729_12:03:17.799922]@2 SELinux: Context u:object_r:theme_data_file:s0 is not valid (left unmapped).
1504[19700729_12:03:17.820352]@2 SELinux: Context u:object_r:usf_data_file:s0 is not valid (left unmapped).
1505[19700729_12:03:18.380618]@2 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1506[19700729_12:03:18.388236]@2 F2FS-fs (dm-0): Unrecognized mount option "noatime" or missing value
1507[19700729_12:03:18.463193]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1508[19700729_12:03:20.651808]@0 SMBCHG: qpnp_check_charger_uovp: charger is over voltage, count=2
1509[19700729_12:03:20.659423]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=1, pre_uovp_satus=1, over_volt_count=3
1510[19700729_12:03:20.669271]@0 SMBCHG: qpnp_check_charger_uovp: charger is over voltage, stop charging
1511[19700729_12:03:20.678047]@0 SMBCHG: smbchg_charging_en: enable=0
1512[19700729_12:03:26.652030]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=0, pre_uovp_satus=1,not_over_volt_count=0
1513[19700729_12:03:32.652108]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=0, pre_uovp_satus=0,not_over_volt_count=1
1514[19700729_12:03:34.833723]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:68
1515[19700729_12:03:34.842363]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:68
1516[19700729_12:03:34.851991]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:68
1517[19700729_12:03:34.861625]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:68
1518[19700729_12:03:34.970426]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:65
1519[19700729_12:03:34.979068]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:65
1520[19700729_12:03:34.988697]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:65
1521[19700729_12:03:34.998332]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:65
1522[19700729_12:03:35.204708]@2 audit: type=1400 audit(18101015.203:45): avc: denied { rename } for pid=439 comm="recovery" name="file_contexts" dev="rootfs" ino=8645 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1523[19700729_12:03:35.235362]@2 audit: type=1400 audit(18101015.233:46): avc: denied { append } for pid=439 comm="recovery" path="/cache/recovery/log" dev="sda3" ino=8194 scontext=u:r:init:s0 tcontext=u:object_r:cache_file:s0 tclass=file permissive=1
1524[19700729_12:03:35.307138]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:48
1525[19700729_12:03:35.315798]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:48
1526[19700729_12:03:35.005250]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:48
1527[20170125_06:49:12.776885]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:48
1528[20170125_06:49:12.788864]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1529[20170125_06:49:12.801735]@2 audit: type=1400 audit(1485326952.797:47): avc: denied { create } for pid=439 comm="recovery" name="orsin" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
1530[20170125_06:49:12.819961]@2 audit: type=1400 audit(1485326952.817:48): avc: denied { read } for pid=439 comm="recovery" name="orsin" dev="rootfs" ino=16240 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
1531[20170125_06:49:12.840960]@2 audit: type=1400 audit(1485326952.837:49): avc: denied { open } for pid=439 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=16240 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
1532[20170125_06:49:12.885561]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:46
1533[20170125_06:49:12.894226]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:46
1534[20170125_06:49:12.903863]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:46
1535[20170125_06:49:12.903868]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:46
1536[20170125_06:49:13.579518]@2 audit: type=1400 audit(1485326953.577:50): avc: denied { write } for pid=502 comm="recovery" name="mtp_usb" dev="tmpfs" ino=16020 scontext=u:r:init:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1537[20170125_06:49:13.600003]@2 mtp_open
1538[20170125_06:49:16.093692]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=0, pre_uovp_satus=0,not_over_volt_count=2
1539[20170125_06:49:20.945321]@1 active wakeup source: chg_wake_lock
1540[20170125_06:49:22.093485]@0 SMBCHG: qpnp_check_charger_uovp: uovp_satus=0, pre_uovp_satus=0,not_over_volt_count=3
1541[20170125_06:49:22.102719]@0 SMBCHG: qpnp_check_charger_uovp: charger voltage is back to normal
1542[20170125_06:49:22.111201]@0 SMBCHG: smbchg_charging_en: enable=1
1543[20170125_06:49:22.123574]@0 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
1544[20170125_06:49:28.096470]@0 BQ: fg_soc_calibrate: soc:23, soc_calib:23, VOLT:3804, current:-799
1545[20170125_06:50:21.105319]@1 active wakeup source: chg_wake_lock
1546[20170125_06:51:05.623658]@1 synaptics,s3320: start get base data:1
1547[20170125_06:51:05.732257]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x47 !
1548[20170125_06:51:05.740922]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1549[20170125_06:51:10.093255]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 24
1550[20170125_06:51:10.106791]@0 BQ: fg_soc_calibrate: soc:24, soc_calib:24, VOLT:3820, current:-555
1551[20170125_06:51:11.068393]@2 audit: type=1400 audit(1485327071.064:51): avc: denied { rename } for pid=508 comm="recovery" name="__properties__" dev="tmpfs" ino=15637 scontext=u:r:init:s0 tcontext=u:object_r:properties_device:s0 tclass=file permissive=1
1552[20170125_06:51:11.091729]@0 audit: type=1400 audit(1485327071.087:52): avc: denied { execute } for pid=509 comm="recovery" name="updater" dev="tmpfs" ino=1122 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
1553[20170125_06:51:11.112207]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:62
1554[20170125_06:51:11.112409]@2 audit: type=1400 audit(1485327071.110:53): avc: denied { execute_no_trans } for pid=509 comm="recovery" path="/tmp/updater" dev="tmpfs" ino=1122 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
1555[20170125_06:51:11.115669]@2 audit: type=1400 audit(1485327071.114:54): avc: denied { create } for pid=509 comm="updater" name="aroma-data" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1
1556[20170125_06:51:11.163320]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:62
1557[20170125_06:51:11.163326]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:62
1558[20170125_06:51:11.163330]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:62
1559[20170125_06:51:11.372229]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:60
1560[20170125_06:51:11.380892]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:60
1561[20170125_06:51:11.380898]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:60
1562[20170125_06:51:11.380903]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:60
1563[20170125_06:51:11.716188]@2 audit: type=1400 audit(1485327071.714:55): avc: denied { execute } for pid=509 comm="updater" path=2F7364636172642F5F524F4D206974702F4B65726E656C652F456C656D656E74616C582D4F50332D322E30312E7A6970 dev="dm-0" ino=104428 scontext=u:r:init:s0 tcontext=u:object_r:media_rw_data_file:s0:c512,c768 tclass=file permissive=1
1564[20170125_06:51:11.745836]@2 audit: type=1400 audit(1485327071.744:56): avc: denied { execute } for pid=509 comm="updater" path="/dev/graphics/fb0" dev="tmpfs" ino=16082 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
1565[20170125_06:51:11.782264]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:42
1566[20170125_06:51:11.782276]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:42
1567[20170125_06:51:11.782283]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:42
1568[20170125_06:51:11.782289]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:42
1569[20170125_06:51:11.882223]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:45
1570[20170125_06:51:11.882232]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:45
1571[20170125_06:51:11.882237]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:45
1572[20170125_06:51:11.882242]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:45
1573[20170125_06:51:21.265321]@1 active wakeup source: chg_wake_lock
1574[20170125_06:51:23.182195]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:68
1575[20170125_06:51:23.182203]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:68
1576[20170125_06:51:23.182208]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:68
1577[20170125_06:51:23.182212]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:68
1578[20170125_06:51:23.282234]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:44
1579[20170125_06:51:23.282242]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:44
1580[20170125_06:51:23.282248]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:44
1581[20170125_06:51:23.282252]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:44
1582[20170125_06:51:25.985508]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:64
1583[20170125_06:51:25.985516]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:64
1584[20170125_06:51:25.985520]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:64
1585[20170125_06:51:25.985525]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:64
1586[20170125_06:51:26.085555]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:43
1587[20170125_06:51:26.085564]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:43
1588[20170125_06:51:26.085569]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:43
1589[20170125_06:51:26.085574]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:43
1590[20170125_06:51:27.885550]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:63
1591[20170125_06:51:27.885559]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:63
1592[20170125_06:51:27.885564]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:63
1593[20170125_06:51:27.885568]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:63
1594[20170125_06:51:27.985604]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:42
1595[20170125_06:51:27.985613]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:42
1596[20170125_06:51:27.985619]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:42
1597[20170125_06:51:27.985624]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:42
1598[20170125_06:51:32.194417]@3 audit: type=1400 audit(1485327092.190:57): avc: denied { unlink } for pid=509 comm="updater" name="aroma-data" dev="tmpfs" ino=16249 scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1
1599[20170125_06:51:32.822861]@0 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1600[20170125_06:51:32.988849]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:65
1601[20170125_06:51:32.997529]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:65
1602[20170125_06:51:32.997534]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:65
1603[20170125_06:51:32.997539]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:65
1604[20170125_06:51:33.508890]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:63
1605[20170125_06:51:33.517552]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:63
1606[20170125_06:51:33.517557]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:63
1607[20170125_06:51:33.517562]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:63
1608[20170125_06:51:35.118935]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:49
1609[20170125_06:51:35.127588]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:49
1610[20170125_06:51:35.137218]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:49
1611[20170125_06:51:35.146854]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:49
1612[20170125_06:51:35.355706]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:47
1613[20170125_06:51:35.364359]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:47
1614[20170125_06:51:35.373980]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:47
1615[20170125_06:51:35.383623]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:47
1616[20170125_06:51:36.292207]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:64
1617[20170125_06:51:36.300854]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:64
1618[20170125_06:51:36.300859]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:64
1619[20170125_06:51:36.300864]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:64
1620[20170125_06:51:36.908884]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:42
1621[20170125_06:51:36.917530]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:42
1622[20170125_06:51:36.927168]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:42
1623[20170125_06:51:36.936800]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:42
1624[20170125_06:51:39.145512]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:61
1625[20170125_06:51:39.154153]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:61
1626[20170125_06:51:39.154159]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:61
1627[20170125_06:51:39.154163]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:61
1628[20170125_06:51:39.662233]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:46
1629[20170125_06:51:39.670887]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:46
1630[20170125_06:51:39.680511]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:46
1631[20170125_06:51:39.690161]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:46
1632[20170125_06:51:56.847393]@3 audit: type=1400 audit(1485327116.844:58): avc: denied { execute } for pid=518 comm="updater" path=2F7364636172642F5F524F4D206974702F4F4F535F41726F6D615F4465626C6F617465725F4F6E65506C7573335F33545F76345F302E7A6970 dev="dm-0" ino=99452 scontext=u:r:init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1633[20170125_06:51:56.998723]@1 msm_thermal:do_core_control Set Offline: CPU3 Temp: 70
1634[20170125_06:51:57.024327]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:70
1635[20170125_06:51:57.024336]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:70
1636[20170125_06:51:57.024340]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:70
1637[20170125_06:51:57.024344]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:70
1638[20170125_06:51:57.125436]@1 msm_thermal:do_core_control Allow Online CPU3 Temp: 45
1639[20170125_06:51:57.126268]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:45
1640[20170125_06:51:57.126277]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:45
1641[20170125_06:51:57.126282]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:45
1642[20170125_06:51:57.126287]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:45
1643[20170125_06:52:06.825551]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:63
1644[20170125_06:52:06.825559]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:63
1645[20170125_06:52:06.825564]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:63
1646[20170125_06:52:06.825568]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:63
1647[20170125_06:52:06.925556]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:60
1648[20170125_06:52:06.925564]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:60
1649[20170125_06:52:06.925569]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:60
1650[20170125_06:52:06.925574]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:60
1651[20170125_06:52:07.025624]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:46
1652[20170125_06:52:07.025634]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:46
1653[20170125_06:52:07.025640]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:46
1654[20170125_06:52:07.025646]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:46
1655[20170125_06:52:07.125571]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:43
1656[20170125_06:52:07.125580]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:43
1657[20170125_06:52:07.125585]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:43
1658[20170125_06:52:07.125589]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:43
1659[20170125_06:52:21.425313]@1 active wakeup source: chg_wake_lock
1660[20170125_06:52:22.328842]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:61
1661[20170125_06:52:22.328850]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:61
1662[20170125_06:52:22.328855]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:61
1663[20170125_06:52:22.328860]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:61
1664[20170125_06:52:22.628914]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:45
1665[20170125_06:52:22.628923]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:45
1666[20170125_06:52:22.628928]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:45
1667[20170125_06:52:22.628933]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:45
1668[20170125_06:52:30.529079]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:61
1669[20170125_06:52:30.529088]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:61
1670[20170125_06:52:30.529092]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:61
1671[20170125_06:52:30.529097]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:61
1672[20170125_06:52:30.629079]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:61
1673[20170125_06:52:30.629087]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:61
1674[20170125_06:52:30.629092]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:61
1675[20170125_06:52:30.629097]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:61
1676[20170125_06:52:31.129098]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:49
1677[20170125_06:52:31.129109]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:49
1678[20170125_06:52:31.129116]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:49
1679[20170125_06:52:31.129122]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:49
1680[20170125_06:52:31.229194]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:45
1681[20170125_06:52:31.229202]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:45
1682[20170125_06:52:31.229208]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:45
1683[20170125_06:52:31.229212]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:45
1684[20170125_06:52:33.528877]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:60
1685[20170125_06:52:33.528885]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:60
1686[20170125_06:52:33.528890]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:60
1687[20170125_06:52:33.528894]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:60
1688[20170125_06:52:34.428939]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:46
1689[20170125_06:52:34.428948]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:46
1690[20170125_06:52:34.428953]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:46
1691[20170125_06:52:34.428958]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:46
1692[20170125_06:52:36.328875]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:65
1693[20170125_06:52:36.328884]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:65
1694[20170125_06:52:36.328889]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:65
1695[20170125_06:52:36.328893]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:65
1696[20170125_06:52:36.428912]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:62
1697[20170125_06:52:36.428922]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:62
1698[20170125_06:52:36.428927]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:62
1699[20170125_06:52:36.428932]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:62
1700[20170125_06:52:36.829010]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:46
1701[20170125_06:52:36.829021]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:46
1702[20170125_06:52:36.829028]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:46
1703[20170125_06:52:36.829035]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:46
1704[20170125_06:52:36.928928]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:45
1705[20170125_06:52:36.928937]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:45
1706[20170125_06:52:36.928943]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:45
1707[20170125_06:52:36.928948]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:45
1708[20170125_06:52:38.028878]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:65
1709[20170125_06:52:38.028886]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:65
1710[20170125_06:52:38.028891]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:65
1711[20170125_06:52:38.028895]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:65
1712[20170125_06:52:38.128912]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:48
1713[20170125_06:52:38.128920]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:48
1714[20170125_06:52:38.128925]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:48
1715[20170125_06:52:38.128930]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:48
1716[20170125_06:52:39.928557]@2 audit: type=1400 audit(1485327159.924:59): avc: denied { execute } for pid=552 comm="update-binary" path=2F6465762F5F5F6C65676163795F70726F706572746965735F5F202864656C6574656429 dev="tmpfs" ino=16246 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=file permissive=1
1717[20170125_06:52:39.939280]@0 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1718[20170125_06:52:39.939620]@1 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1719[20170125_06:52:39.940911]@0 audit: type=1400 audit(1485327159.937:60): avc: denied { write } for pid=552 comm="update-binary" name="Duo" dev="sde20" ino=105 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=1
1720[20170125_06:52:39.940935]@0 audit: type=1400 audit(1485327159.937:61): avc: denied { remove_name } for pid=552 comm="update-binary" name="Duo.apk" dev="sde20" ino=106 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=1
1721[20170125_06:52:39.940951]@0 audit: type=1400 audit(1485327159.937:62): avc: denied { unlink } for pid=552 comm="update-binary" name="Duo.apk" dev="sde20" ino=106 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
1722[20170125_06:52:39.941522]@0 audit: type=1400 audit(1485327159.937:63): avc: denied { rmdir } for pid=552 comm="update-binary" name="Duo" dev="sde20" ino=105 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=1
1723[20170125_06:52:40.029780]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:67
1724[20170125_06:52:40.029789]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:67
1725[20170125_06:52:40.029794]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:67
1726[20170125_06:52:40.029798]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:67
1727[20170125_06:52:40.178894]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:63
1728[20170125_06:52:40.187554]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:63
1729[20170125_06:52:40.187560]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:63
1730[20170125_06:52:40.187565]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:63
1731[20170125_06:52:41.188994]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:46
1732[20170125_06:52:41.197691]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:46
1733[20170125_06:52:41.207296]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:46
1734[20170125_06:52:41.216918]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:46
1735[20170125_06:52:41.325572]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:45
1736[20170125_06:52:41.334242]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:45
1737[20170125_06:52:41.343863]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:45
1738[20170125_06:52:41.353492]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:45
1739[20170125_06:52:43.672219]@0 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1740[20170125_06:52:43.681522]@0 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1741[20170125_06:52:43.862229]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:62
1742[20170125_06:52:43.870913]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:62
1743[20170125_06:52:43.880519]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:62
1744[20170125_06:52:43.890139]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:62
1745[20170125_06:52:44.298887]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:61
1746[20170125_06:52:44.307536]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:61
1747[20170125_06:52:44.317163]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:61
1748[20170125_06:52:44.326814]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:61
1749[20170125_06:52:44.425616]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:49
1750[20170125_06:52:44.434284]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:49
1751[20170125_06:52:44.434292]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:49
1752[20170125_06:52:44.434298]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:49
1753[20170125_06:52:44.542222]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:49
1754[20170125_06:52:44.550869]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:49
1755[20170125_06:52:44.560509]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:49
1756[20170125_06:52:44.560514]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:49
1757[20170125_06:52:50.462192]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:61
1758[20170125_06:52:50.470852]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:61
1759[20170125_06:52:50.470860]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:61
1760[20170125_06:52:50.470864]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:61
1761[20170125_06:52:50.578887]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:48
1762[20170125_06:52:50.587533]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:48
1763[20170125_06:52:50.597163]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:48
1764[20170125_06:52:50.606796]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:48
1765[20170125_06:52:51.215391]@1 msm_thermal:do_core_control Set Offline: CPU3 Temp: 72
1766[20170125_06:52:51.241730]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:72
1767[20170125_06:52:51.241738]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:72
1768[20170125_06:52:51.241744]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:72
1769[20170125_06:52:51.241748]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:72
1770[20170125_06:52:51.348756]@1 msm_thermal:do_core_control Allow Online CPU3 Temp: 49
1771[20170125_06:52:51.349648]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:49
1772[20170125_06:52:51.349657]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:49
1773[20170125_06:52:51.349663]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:49
1774[20170125_06:52:51.349667]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:49
1775[20170125_06:52:54.648861]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:61
1776[20170125_06:52:54.648870]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:61
1777[20170125_06:52:54.648875]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:61
1778[20170125_06:52:54.648879]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:61
1779[20170125_06:52:54.748898]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:44
1780[20170125_06:52:54.748906]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:44
1781[20170125_06:52:54.748912]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:44
1782[20170125_06:52:54.748916]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:44
1783[20170125_06:53:13.452170]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:63
1784[20170125_06:53:13.452178]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:63
1785[20170125_06:53:13.452183]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:63
1786[20170125_06:53:13.452187]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:63
1787[20170125_06:53:13.552211]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:61
1788[20170125_06:53:13.552220]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:61
1789[20170125_06:53:13.552225]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:61
1790[20170125_06:53:13.552229]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:61
1791[20170125_06:53:13.652281]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:43
1792[20170125_06:53:13.652291]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:43
1793[20170125_06:53:13.652298]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:43
1794[20170125_06:53:13.652303]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:43
1795[20170125_06:53:13.752235]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:41
1796[20170125_06:53:13.752244]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:41
1797[20170125_06:53:13.752249]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:41
1798[20170125_06:53:13.752254]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:41
1799[20170125_06:53:21.585312]@1 active wakeup source: chg_wake_lock
1800[20170125_06:53:31.352182]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:61
1801[20170125_06:53:31.352191]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:61
1802[20170125_06:53:31.352195]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:61
1803[20170125_06:53:31.352199]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:61
1804[20170125_06:53:31.452202]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:42
1805[20170125_06:53:31.452211]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:42
1806[20170125_06:53:31.452217]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:42
1807[20170125_06:53:31.452222]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:42
1808[20170125_06:53:39.051486]@0 mdss_fb_do_ioctl: unsupported ioctl (5401)
1809[20170125_06:53:39.051495]@0 mdss_fb_compat_ioctl: unsupported ioctl
1810[20170125_06:53:39.052065]@3 audit: type=1400 audit(1485327219.047:64): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/usb-ffs/adb/ep2" dev="functionfs" ino=16136 scontext=u:r:init:s0 tcontext=u:object_r:functionfs:s0 tclass=file permissive=1
1811[20170125_06:53:39.052275]@3 audit: type=1400 audit(1485327219.050:65): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/snd/timer" dev="tmpfs" ino=16085 scontext=u:r:init:s0 tcontext=u:object_r:audio_device:s0 tclass=chr_file permissive=1
1812[20170125_06:53:39.052396]@3 audit: type=1400 audit(1485327219.050:66): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/graphics/fb1" dev="tmpfs" ino=16083 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
1813[20170125_06:53:39.052488]@3 audit: type=1400 audit(1485327219.050:67): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/pmsg0" dev="tmpfs" ino=16046 scontext=u:r:init:s0 tcontext=u:object_r:pmsg_device:s0 tclass=chr_file permissive=1
1814[20170125_06:53:39.052616]@3 audit: type=1400 audit(1485327219.050:68): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/uinput" dev="tmpfs" ino=16024 scontext=u:r:init:s0 tcontext=u:object_r:uhid_device:s0 tclass=chr_file permissive=1
1815[20170125_06:53:39.052668]@3 audit: type=1400 audit(1485327219.050:69): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/mtp_usb" dev="tmpfs" ino=16020 scontext=u:r:init:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
1816[20170125_06:53:39.052786]@3 audit: type=1400 audit(1485327219.050:70): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/usb_accessory" dev="tmpfs" ino=16005 scontext=u:r:init:s0 tcontext=u:object_r:usbaccessory_device:s0 tclass=chr_file permissive=1
1817[20170125_06:53:39.052860]@3 audit: type=1400 audit(1485327219.050:71): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/xt_qtaguid" dev="tmpfs" ino=16004 scontext=u:r:init:s0 tcontext=u:object_r:qtaguid_device:s0 tclass=chr_file permissive=1
1818[20170125_06:53:39.052957]@3 audit: type=1400 audit(1485327219.050:72): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/pn544" dev="tmpfs" ino=15996 scontext=u:r:init:s0 tcontext=u:object_r:nfc_device:s0 tclass=chr_file permissive=1
1819[20170125_06:53:39.053059]@3 audit: type=1400 audit(1485327219.050:73): avc: denied { getattr } for pid=570 comm="busybox" path="/dev/fuse" dev="tmpfs" ino=15981 scontext=u:r:init:s0 tcontext=u:object_r:fuse_device:s0 tclass=chr_file permissive=1
1820[20170125_06:53:39.083258]@3 mdss_fb_do_ioctl: unsupported ioctl (5401)
1821[20170125_06:53:39.083265]@3 mdss_fb_compat_ioctl: unsupported ioctl
1822[20170125_06:53:39.175298]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:63
1823[20170125_06:53:39.175306]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:63
1824[20170125_06:53:39.175311]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:63
1825[20170125_06:53:39.175315]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:63
1826[20170125_06:53:39.495598]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:60
1827[20170125_06:53:39.495609]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:60
1828[20170125_06:53:39.495615]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:60
1829[20170125_06:53:39.495620]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:60
1830[20170125_06:53:39.565505]@2 mdss_fb_do_ioctl: unsupported ioctl (5401)
1831[20170125_06:53:39.565513]@2 mdss_fb_compat_ioctl: unsupported ioctl
1832[20170125_06:53:40.094007]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 25
1833[20170125_06:53:40.096960]@0 BQ: fg_soc_calibrate: soc:25, soc_calib:25, VOLT:3824, current:-79
1834[20170125_06:53:41.095634]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 652800. Temp:60
1835[20170125_06:53:41.095645]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 652800. Temp:60
1836[20170125_06:53:41.095653]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1324800. Temp:60
1837[20170125_06:53:41.095659]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1324800. Temp:60
1838[20170125_06:53:41.160584]@2 mdss_fb_do_ioctl: unsupported ioctl (5401)
1839[20170125_06:53:41.160595]@2 mdss_fb_compat_ioctl: unsupported ioctl
1840[20170125_06:53:41.595813]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:47
1841[20170125_06:53:41.595830]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:47
1842[20170125_06:53:41.595841]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:47
1843[20170125_06:53:41.595851]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:47
1844[20170125_06:53:41.695667]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:48
1845[20170125_06:53:41.695678]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:48
1846[20170125_06:53:41.695685]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:48
1847[20170125_06:53:41.695692]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:48
1848[20170125_06:53:41.795593]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:49
1849[20170125_06:53:41.795603]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:49
1850[20170125_06:53:41.795608]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:49
1851[20170125_06:53:41.795613]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:49
1852[20170125_06:53:42.095532]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:66
1853[20170125_06:53:42.095540]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:66
1854[20170125_06:53:42.095545]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:66
1855[20170125_06:53:42.095549]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:66
1856[20170125_06:53:42.195585]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:62
1857[20170125_06:53:42.195594]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:62
1858[20170125_06:53:42.195600]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:62
1859[20170125_06:53:42.195605]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:62
1860[20170125_06:53:42.295667]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:48
1861[20170125_06:53:42.295678]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:48
1862[20170125_06:53:42.295685]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:48
1863[20170125_06:53:42.295691]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:48
1864[20170125_06:53:42.395565]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:49
1865[20170125_06:53:42.404221]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:49
1866[20170125_06:53:42.404228]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:49
1867[20170125_06:53:42.404233]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:49
1868[20170125_06:53:44.208727]@1 msm_thermal:do_core_control Set Offline: CPU3 Temp: 71
1869[20170125_06:53:44.234629]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:71
1870[20170125_06:53:44.234636]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:71
1871[20170125_06:53:44.234641]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:71
1872[20170125_06:53:44.234645]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:71
1873[20170125_06:53:44.342099]@1 msm_thermal:do_core_control Allow Online CPU3 Temp: 46
1874[20170125_06:53:44.342970]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:46
1875[20170125_06:53:44.342978]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:46
1876[20170125_06:53:44.342983]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:46
1877[20170125_06:53:44.342988]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:46
1878[20170125_06:53:45.442172]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:65
1879[20170125_06:53:45.450986]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:65
1880[20170125_06:53:45.450992]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:65
1881[20170125_06:53:45.450997]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:65
1882[20170125_06:53:45.658876]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1036800. Temp:61
1883[20170125_06:53:45.667545]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1036800. Temp:61
1884[20170125_06:53:45.667551]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1632000. Temp:61
1885[20170125_06:53:45.667555]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1632000. Temp:61
1886[20170125_06:53:45.768926]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1324800. Temp:49
1887[20170125_06:53:45.777611]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1324800. Temp:49
1888[20170125_06:53:45.787210]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1920000. Temp:49
1889[20170125_06:53:45.796844]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1920000. Temp:49
1890[20170125_06:53:45.851117]@0 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1891[20170125_06:53:45.863076]@0 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1892[20170125_06:53:46.505553]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1728000. Temp:49
1893[20170125_06:53:46.514227]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1728000. Temp:49
1894[20170125_06:53:46.523862]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2265600. Temp:49
1895[20170125_06:53:46.523867]@1 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2265600. Temp:49
1896[20170125_06:53:47.057349]@3 EXT4-fs (sde20): warning: maximal mount count reached, running e2fsck is recommended
1897[20170125_06:53:47.068409]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1898[20170125_06:53:47.202895]@2 SysRq : Emergency Remount R/O
1899[20170125_06:53:47.314497]@2 EXT4-fs (sda3): re-mounted. Opts: (null)
1900[20170125_06:53:47.319721]@2 Emergency Remount complete
1901[20170125_06:53:47.409435]@1 fusb301_power_down_callback : action=0x1
1902[20170125_06:53:47.415441]@0 sd 0:0:0:4: [sde] Synchronizing SCSI cache
1903[20170125_06:53:47.422885]@1 sd 0:0:0:0: [sda] Synchronizing SCSI cache
1904[20170125_06:53:47.428954]@2 mdss_fb_release_all: try to close unopened fb 1! from pid:1 name:init
1905[20170125_06:53:47.437934]@2 --------backlight level = 0---------
1906[20170125_06:53:47.444814]@2 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0
1907[20170125_06:53:47.676782]@2 mdss_dsi_off start
1908[20170125_06:53:47.705571]@0 mdss_dsi_off end
1909[20170125_06:53:47.710040]@0 FASTCHG: usb_sw_gpio_set: set usb_sw_gpio = 0
1910[20170125_06:53:47.715689]@2 SMBCHG: backup_soc: backup_soc[25]
1911[20170125_06:53:47.721782]@2 SMBCHG: smbchg_shutdown: smbchg_shutdown
1912[20170125_06:53:47.727871]@0 reboot: Restarting system with command ''
1913[20170125_06:53:47.733712]@0 Going down for restart now
1914[20170125_06:53:47.738634]@0 set_dload_mode OFF
1915[20170125_06:53:47.743493]@0 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: configuring PON for reset
1916[20170125_06:53:47.752489]@0 msm_restart_prepare : cmd is , set to reboot mode