· 6 years ago · Sep 16, 2019, 11:00 AM
1U-Boot TPL 2019.10-rc3-00320-g23b93e33ad-dirty (Sep 16 2019 - 18:17:38)
2con reg
3cru , cic , grf , sgrf , pmucru , pmu
4Starting SDRAM initialization...
5sdram_init: data trained for rank 2, ch 0
6sdram_init: data trained for rank 2, ch 1
7Channel 0: sdram_init: data train failed for channel 0
8Channel 1: sdram_init: data train failed for channel 0
9256B stride
10cic: ctr10 : (0xff620000 - 0x14)
11cic: status0 : (0xff620010 - 0x101)
12grf: ddrc0_con0 : (0xff77e380 - 0x1f81)
13grf: ddrc1_con0 : (0xff77e388 - 0x1f81)
14grf: soc_con0 : (0xff77e200 - 0x0)
15pmu: noc_auto_ena : (0xff3100d8 - 0x0)
16pmu: bus_idle_req : (0xff310060 - 0x0)
17pmu: bus_idle_st : (0xff310064 - 0x0)
18pmugrf: os_reg2 : (0xff320308 - 0x3aa17aa1)
19pmugrf: os_reg3 : (0xff32030c - 0x20000005)
20pmusgrf: soc_con4 : (0xff33e010 - 0x3600)
21Finish SDRAM initialization...
22Trying to boot from BOOTROM
23Returning to boot ROM...
24
25U-Boot SPL 2019.10-rc3-00320-g23b93e33ad-dirty (Sep 16 2019 - 18:17:38 +0530)
26Trying to boot from MMC1
27NOTICE: BL31: v2.1(release):v2.1-705-g42cdeb93
28NOTICE: BL31: Built : 18:17:28, Sep 16 2019
29
30
31U-Boot 2019.10-rc3-00320-g23b93e33ad-dirty (Sep 16 2019 - 18:19:19 +0530)
32
33Model: Hardkernel ODROID-N1
34DRAM: rk3399_dmc_probe: pmugrf = 00000000ff320000
353.9 GiB
36MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
37Loading Environment from MMC... *** Warning - bad CRC, using default environment
38
39In: serial@ff1a0000
40Out: serial@ff1a0000
41Err: serial@ff1a0000
42Model: Hardkernel ODROID-N1
43rockchip_dnl_key_pressed: adc_channel_single_shot fail!
44Net:
45Warning: ethernet@fe300000 (eth0) using random MAC address - d2:28:cc:c2:98:5e
46eth0: ethernet@fe300000
47Hit any key to stop autoboot: 0
48Card did not respond to voltage select!
49switch to partitions #0, OK
50mmc1 is current device
51Scanning mmc 1:1...
52Found U-Boot script /boot/boot.scr
53871 bytes read in 5 ms (169.9 KiB/s)
54## Executing script at 00500000
5524838656 bytes read in 1049 ms (22.6 MiB/s)
5656286 bytes read in 10 ms (5.4 MiB/s)
577326472 bytes read in 315 ms (22.2 MiB/s)
58## Flattened Device Tree blob at 01f00000
59 Booting using the fdt blob at 0x1f00000
60 Loading Ramdisk to f5818000, end f5f14b08 ... OK
61 Loading Device Tree to 00000000f5807000, end 00000000f5817fff ... OK
62
63Starting kernel ...
64
65[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
66[ 0.000000] Linux version 5.3.0-xn1ml1 (amoon@thinkpad-T420) (gcc version 9.2.0 (GCC)) #2 SMP PREEMPT Mon Sep 16 16:53:37 IST 2019
67[ 0.000000] Machine model: Hardkernel ODROID-N1
68[ 0.000000] efi: Getting EFI parameters from FDT:
69[ 0.000000] efi: UEFI not found.
70[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
71[ 0.000000] NUMA: No NUMA configuration found
72[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
73[ 0.000000] NUMA: NODE_DATA [mem 0xf50de840-0xf50dffff]
74[ 0.000000] Zone ranges:
75[ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
76[ 0.000000] Normal empty
77[ 0.000000] Movable zone start for each node
78[ 0.000000] Early memory node ranges
79[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
80[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
81[ 0.000000] psci: probing for conduit method from DT.
82[ 0.000000] psci: PSCIv1.1 detected in firmware.
83[ 0.000000] psci: Using standard PSCI v0.2 function IDs
84[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
85[ 0.000000] psci: SMC Calling Convention v1.1
86[ 0.000000] percpu: Embedded 23 pages/cpu s56728 r8192 d29288 u94208
87[ 0.000000] Detected VIPT I-cache on CPU0
88[ 0.000000] CPU features: detected: ARM erratum 845719
89[ 0.000000] CPU features: detected: GIC system register CPU interface
90[ 0.000000] Speculative Store Bypass Disable mitigation not required
91[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
92[ 0.000000] Policy zone: DMA32
93[ 0.000000] Kernel command line: earlyprintk console=ttyS2,115200n8 root=PARTUUID=d2acb039-01 rw rootwait
94[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
95[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
96[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
97[ 0.000000] Memory: 3914788K/4061184K available (11388K kernel code, 1792K rwdata, 6020K rodata, 4992K init, 447K bss, 113628K reserved, 32768K cma-reserved)
98[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
99[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
100[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
101[ 0.000000] Tasks RCU enabled.
102[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
103[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
104[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
105[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
106[ 0.000000] GICv3: Distributor has no Range Selector support
107[ 0.000000] GICv3: no VLPI support, no direct LPI support
108[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
109[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
110[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f0480000 (flat, esz 8, psz 64K, shr 0)
111[ 0.000000] ITS: using cache flushing for cmd queue
112[ 0.000000] GICv3: using LPI property table @0x00000000f0440000
113[ 0.000000] GIC: using cache flushing for LPI property table
114[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f0450000
115[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
116[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
117[ 0.000000] random: get_random_bytes called from start_kernel+0x300/0x494 with crng_init=0
118[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
119[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
120[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
121[ 0.002614] Console: colour dummy device 80x25
122[ 0.002732] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
123[ 0.002748] pid_max: default: 32768 minimum: 301
124[ 0.002878] LSM: Security Framework initializing
125[ 0.002976] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
126[ 0.003008] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
127[ 0.027773] ASID allocator initialised with 32768 entries
128[ 0.035768] rcu: Hierarchical SRCU implementation.
129[ 0.043898] Platform MSI: interrupt-controller@fee20000 domain created
130[ 0.044291] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
131[ 0.049733] EFI services will not be available.
132[ 0.056028] smp: Bringing up secondary CPUs ...
133[ 0.088246] Detected VIPT I-cache on CPU1
134[ 0.088284] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
135[ 0.088300] GICv3: CPU1: using allocated LPI pending table @0x00000000f0460000
136[ 0.088343] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
137[ 0.120316] Detected VIPT I-cache on CPU2
138[ 0.120346] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
139[ 0.120360] GICv3: CPU2: using allocated LPI pending table @0x00000000f0470000
140[ 0.120392] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
141[ 0.152415] Detected VIPT I-cache on CPU3
142[ 0.152442] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
143[ 0.152455] GICv3: CPU3: using allocated LPI pending table @0x00000000f0500000
144[ 0.152485] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
145[ 0.184522] CPU features: detected: EL2 vector hardening
146[ 0.184548] Detected PIPT I-cache on CPU4
147[ 0.184579] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
148[ 0.184593] GICv3: CPU4: using allocated LPI pending table @0x00000000f0510000
149[ 0.184627] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
150[ 0.216627] Detected PIPT I-cache on CPU5
151[ 0.216652] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
152[ 0.216664] GICv3: CPU5: using allocated LPI pending table @0x00000000f0520000
153[ 0.216690] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
154[ 0.216802] smp: Brought up 1 node, 6 CPUs
155[ 0.216871] SMP: Total of 6 processors activated.
156[ 0.216882] CPU features: detected: 32-bit EL0 Support
157[ 0.216892] CPU features: detected: CRC32 instructions
158[ 0.218239] CPU: All CPU(s) started at EL2
159[ 0.218284] alternatives: patching kernel code
160[ 0.221421] devtmpfs: initialized
161[ 0.237391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
162[ 0.237419] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
163[ 0.239319] pinctrl core: initialized pinctrl subsystem
164[ 0.241693] DMI not present or invalid.
165[ 0.242239] NET: Registered protocol family 16
166[ 0.243100] audit: initializing netlink subsys (disabled)
167[ 0.243300] audit: type=2000 audit(0.240:1): state=initialized audit_enabled=0 res=1
168[ 0.245388] cpuidle: using governor menu
169[ 0.245819] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
170[ 0.250185] DMA: preallocated 256 KiB pool for atomic allocations
171[ 0.252901] Serial: AMBA PL011 UART driver
172[ 0.304242] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
173[ 0.304256] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
174[ 0.304266] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
175[ 0.304275] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
176[ 0.307290] cryptd: max_cpu_qlen set to 1000
177[ 0.313069] ACPI: Interpreter disabled.
178[ 0.315013] vcc5v0_sys: supplied by vcc12v_dcin
179[ 0.315262] vcc3v3_sys: supplied by vcc12v_dcin
180[ 0.315527] vcca1v8_s3: supplied by vcc3v3_sys
181[ 0.316065] vcc3v0_sd: supplied by vcc3v3_sys
182[ 0.316427] vcc5v0_host: supplied by vcc5v0_sys
183[ 0.316779] vcc5v0_host31: supplied by vcc5v0_sys
184[ 0.317127] vcc5v0_host32: supplied by vcc5v0_sys
185[ 0.320191] vgaarb: loaded
186[ 0.320532] SCSI subsystem initialized
187[ 0.321026] usbcore: registered new interface driver usbfs
188[ 0.321071] usbcore: registered new interface driver hub
189[ 0.321154] usbcore: registered new device driver usb
190[ 0.322482] pps_core: LinuxPPS API ver. 1 registered
191[ 0.322490] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
192[ 0.322507] PTP clock support registered
193[ 0.322722] EDAC MC: Ver: 3.0.0
194[ 0.324457] FPGA manager framework
195[ 0.324536] Advanced Linux Sound Architecture Driver Initialized.
196[ 0.325309] clocksource: Switched to clocksource arch_sys_counter
197[ 0.325463] VFS: Disk quotas dquot_6.6.0
198[ 0.325523] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
199[ 0.325729] pnp: PnP ACPI: disabled
200[ 0.332230] thermal_sys: Registered thermal governor 'step_wise'
201[ 0.332235] thermal_sys: Registered thermal governor 'power_allocator'
202[ 0.332798] NET: Registered protocol family 2
203[ 0.333193] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
204[ 0.333275] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
205[ 0.333653] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
206[ 0.334319] TCP: Hash tables configured (established 32768 bind 32768)
207[ 0.334440] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
208[ 0.334576] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
209[ 0.334920] NET: Registered protocol family 1
210[ 0.335428] RPC: Registered named UNIX socket transport module.
211[ 0.335437] RPC: Registered udp transport module.
212[ 0.335444] RPC: Registered tcp transport module.
213[ 0.335450] RPC: Registered tcp NFSv4.1 backchannel transport module.
214[ 0.335463] PCI: CLS 0 bytes, default 64
215[ 0.335603] Unpacking initramfs...
216[ 0.793712] Freeing initrd memory: 7152K
217[ 0.794603] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
218[ 0.794905] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
219[ 0.795333] kvm [1]: IPA Size Limit: 40bits
220[ 0.796058] kvm [1]: vgic-v2@fff20000
221[ 0.796087] kvm [1]: GIC system register CPU interface enabled
222[ 0.796269] kvm [1]: vgic interrupt IRQ10
223[ 0.796481] kvm [1]: Hyp mode initialized successfully
224[ 0.942783] Initialise system trusted keyrings
225[ 0.942946] workingset: timestamp_bits=44 max_order=20 bucket_order=0
226[ 0.949636] squashfs: version 4.0 (2009/01/31) Phillip Lougher
227[ 0.950382] NFS: Registering the id_resolver key type
228[ 0.950406] Key type id_resolver registered
229[ 0.950413] Key type id_legacy registered
230[ 0.950428] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
231[ 0.950570] 9p: Installing v9fs 9p2000 file system support
232[ 0.979137] Key type asymmetric registered
233[ 0.979147] Asymmetric key parser 'x509' registered
234[ 0.979198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
235[ 0.979207] io scheduler mq-deadline registered
236[ 0.979215] io scheduler kyber registered
237[ 1.003590] EINJ: ACPI disabled.
238[ 1.012922] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
239[ 1.012936] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
240[ 1.014023] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
241[ 1.014036] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
242[ 1.021028] pwm-regulator: supplied by regulator-dummy
243[ 1.026506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
244[ 1.028600] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
245[ 1.029273] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
246[ 2.211115] printk: console [ttyS2] enabled
247[ 2.217768] SuperH (H)SCI(F) driver initialized
248[ 2.223906] msm_serial: driver initialized
249[ 2.230392] cacheinfo: Unable to detect cache hierarchy for CPU 0
250[ 2.244846] loop: module loaded
251[ 2.256015] libphy: Fixed MDIO Bus: probed
252[ 2.260892] tun: Universal TUN/TAP device driver, 1.6
253[ 2.267895] thunder_xcv, ver 1.0
254[ 2.271563] thunder_bgx, ver 1.0
255[ 2.275217] nicpf, ver 1.0
256[ 2.279406] hclge is initializing
257[ 2.283121] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
258[ 2.291201] hns3: Copyright (c) 2017 Huawei Corporation.
259[ 2.297200] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
260[ 2.303729] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
261[ 2.310386] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
262[ 2.318177] igb: Copyright (c) 2007-2014 Intel Corporation.
263[ 2.324445] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
264[ 2.333207] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
265[ 2.340452] sky2: driver version 1.30
266[ 2.345775] VFIO - User Level meta-driver version: 0.3
267[ 2.367924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
268[ 2.375253] ehci-pci: EHCI PCI platform driver
269[ 2.380262] ehci-platform: EHCI generic platform driver
270[ 2.388368] ehci-platform fe380000.usb: EHCI Host Controller
271[ 2.394729] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
272[ 2.403599] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
273[ 2.425330] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
274[ 2.432795] hub 1-0:1.0: USB hub found
275[ 2.437027] hub 1-0:1.0: 1 port detected
276[ 2.443922] ehci-platform fe3c0000.usb: EHCI Host Controller
277[ 2.450278] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
278[ 2.459129] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
279[ 2.481334] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
280[ 2.488732] hub 2-0:1.0: USB hub found
281[ 2.492963] hub 2-0:1.0: 1 port detected
282[ 2.497882] ehci-orion: EHCI orion driver
283[ 2.502610] ehci-exynos: EHCI EXYNOS driver
284[ 2.507475] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
285[ 2.514408] ohci-pci: OHCI PCI platform driver
286[ 2.519433] ohci-platform: OHCI generic platform driver
287[ 2.525511] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
288[ 2.533030] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
289[ 2.541887] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
290[ 2.609970] hub 3-0:1.0: USB hub found
291[ 2.614204] hub 3-0:1.0: 1 port detected
292[ 2.619057] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
293[ 2.626569] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
294[ 2.635425] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
295[ 2.705835] hub 4-0:1.0: USB hub found
296[ 2.710073] hub 4-0:1.0: 1 port detected
297[ 2.714966] ohci-exynos: OHCI EXYNOS driver
298[ 2.720465] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
299[ 2.726641] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
300[ 2.735349] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
301[ 2.745910] xhci-hcd xhci-hcd.0.auto: irq 226, io mem 0xfe800000
302[ 2.753326] hub 5-0:1.0: USB hub found
303[ 2.757553] hub 5-0:1.0: 1 port detected
304[ 2.762221] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
305[ 2.768375] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
306[ 2.776954] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
307[ 2.784332] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
308[ 2.793858] hub 6-0:1.0: USB hub found
309[ 2.798089] hub 6-0:1.0: 1 port detected
310[ 2.802876] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
311[ 2.809036] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
312[ 2.817750] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
313[ 2.828302] xhci-hcd xhci-hcd.1.auto: irq 227, io mem 0xfe900000
314[ 2.835672] hub 7-0:1.0: USB hub found
315[ 2.839904] hub 7-0:1.0: 1 port detected
316[ 2.844546] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
317[ 2.850706] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
318[ 2.859286] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
319[ 2.866658] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
320[ 2.876174] hub 8-0:1.0: USB hub found
321[ 2.880405] hub 8-0:1.0: 1 port detected
322[ 2.885565] usbcore: registered new interface driver usb-storage
323[ 2.897350] i2c /dev entries driver
324[ 2.904282] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
325[ 2.912024] fan53555-reg: supplied by vcc3v3_sys
326[ 2.919045] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
327[ 2.926764] fan53555-reg: supplied by vcc3v3_sys
328[ 2.933762] rk808 0-001b: chip id: 0x0
329[ 2.941871] rk808-regulator rk808-regulator: there is no dvs0 gpio
330[ 2.948831] rk808-regulator rk808-regulator: there is no dvs1 gpio
331[ 2.955807] DCDC_REG1: supplied by vcc3v3_sys
332[ 2.961595] DCDC_REG2: supplied by vcc3v3_sys
333[ 2.967083] DCDC_REG3: supplied by vcc3v3_sys
334[ 2.972193] DCDC_REG4: supplied by vcc3v3_sys
335[ 2.977598] LDO_REG1: supplied by vcc3v3_sys
336[ 2.983651] LDO_REG2: supplied by vcc3v3_sys
337[ 2.989529] LDO_REG3: supplied by vcc3v3_sys
338[ 2.995480] LDO_REG4: supplied by vcc3v3_sys
339[ 3.001458] LDO_REG5: supplied by vcc3v3_sys
340[ 3.007255] LDO_REG6: supplied by vcc3v3_sys
341[ 3.013199] LDO_REG7: supplied by vcc3v3_sys
342[ 3.019023] LDO_REG8: supplied by vcc3v3_sys
343[ 3.024970] SWITCH_REG1: supplied by vcc3v3_sys
344[ 3.030394] SWITCH_REG2: supplied by vcc3v3_sys
345[ 3.050080] sdhci: Secure Digital Host Controller Interface driver
346[ 3.056991] sdhci: Copyright(c) Pierre Ossman
347[ 3.062155] Synopsys Designware Multimedia Card Interface Driver
348[ 3.069518] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
349[ 3.077611] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
350[ 3.085199] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
351[ 3.091640] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
352[ 3.102641] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
353[ 3.121253] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
354[ 3.145003] sdhci-pltfm: SDHCI platform and OF driver helper
355[ 3.149346] random: fast init done
356[ 3.151947] sdhci-arasan fe330000.sdhci: allocated mmc-pwrseq
357[ 3.161627] mmc1: CQHCI version 5.10
358[ 3.191768] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
359[ 3.201198] ledtrig-cpu: registered to indicate activity on CPUs
360[ 3.208665] usbcore: registered new interface driver usbhid
361[ 3.214922] usbhid: USB HID core driver
362[ 3.221787] NET: Registered protocol family 17
363[ 3.226846] 9pnet: Installing 9P2000 support
364[ 3.231653] Key type dns_resolver registered
365[ 3.236708] registered taskstats version 1
366[ 3.241321] Loading compiled-in X.509 certificates
367[ 3.246114] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
368[ 3.258771] gpio-keys gpio-keys: failed to get gpio: -16
369[ 3.264725] gpio-keys: probe of gpio-keys failed with error -16
370[ 3.271605] hctosys: unable to open rtc device (rtc0)
371[ 3.277939] vccav0v9_c3: supplied by vcc_1v8
372[ 3.282783] ALSA device list:
373[ 3.285323] usb 1-1: new high-speed USB device number 2 using ehci-platform
374[ 3.286104] No soundcards found.
375[ 3.297821] ttyS2 - failed to request DMA
376[ 3.304605] Freeing unused kernel memory: 4992K
377[ 3.309762] Run /init as init process
378:: running early hook [udev]
379Warning: /lib/modules/5.3.0-xn1ml1/modules.devname not found - ignoring
380Starting version 243.0-1-arch
381:: running hook [udev]
382:: Triggering uevents...
383[ 3.413226] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 208
384[ 3.421536] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
385[ 3.434345] mmcblk0: mmc0:aaaa JULIE 14.8 GiB
386[ 3.445440] mmcblk0: p1
387:: performing fsck on '/dev/mmcblk0p1'
388/dev/mmcblk0p1: clean, 61988/972944 files, 869198/3885440 blocks
389:: mounting '/dev/mmcblk0p1' on real root
390[ 4.780065] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
391:: running cleanup hook [udev]
392[ 5.100086] systemd[1]: System time before build time, advancing clock.
393[ 5.406018] NET: Registered protocol family 10
394[ 5.411569] Segment Routing with IPv6
395[ 5.462965] systemd[1]: systemd 243.0-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
396[ 5.488064] systemd[1]: Detected architecture arm64.
397
398Welcome to Arch Linux ARM!
399
400[ 5.506366] systemd[1]: Set hostname to <alarm>.
401[ 5.814200] random: systemd: uninitialized urandom read (16 bytes read)
402[ 5.821671] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
403[ 5.835487] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
404[ 5.846036] systemd[1]: Created slice system-getty.slice.
405[ OK ] Created slice system-getty.slice.
406[ 5.869628] random: systemd: uninitialized urandom read (16 bytes read)
407[ 5.877565] systemd[1]: Created slice system-serial\x2dgetty.slice.
408[ OK ] Created slice system-serial\x2dgetty.slice.
409[ 5.901630] random: systemd: uninitialized urandom read (16 bytes read)
410[ 5.909506] systemd[1]: Created slice User and Session Slice.
411[ OK ] Created slice User and Session Slice.
412[ 5.933771] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
413[ OK ] Started Dispatch Password ?ts to Console Directory Watch.
414[ 5.957751] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
415[ OK ] Started Forward Password R?uests to Wall Directory Watch.
416[ OK ] Reached target Local Encrypted Volumes.
417[ OK ] Reached target Paths.
418[ OK ] Reached target Remote File Systems.
419[ OK ] Reached target Slices.
420[ OK ] Reached target Swap.
421[ OK ] Listening on Device-mapper event daemon FIFOs.
422[ OK ] Listening on LVM2 metadata daemon socket.
423[ OK ] Listening on LVM2 poll daemon socket.
424[ OK ] Listening on Process Core Dump Socket.
425[ OK ] Listening on initctl Compatibility Named Pipe.
426[ OK ] Listening on Journal Audit Socket.
427[ OK ] Listening on Journal Socket (/dev/log).
428[ OK ] Listening on Journal Socket.
429[ OK ] Listening on Network Service Netlink Socket.
430[ OK ] Listening on udev Control Socket.
431[ OK ] Listening on udev Kernel Socket.
432 Mounting Huge Pages File System...
433 Mounting POSIX Message Queue File System...
434 Mounting Kernel Debug File System...
435 Mounting Temporary Directory (/tmp)...
436 Starting Create list of st?odes for the current kernel...
437 Starting Monitoring of LVM?meventd or progress polling...
438 Starting Journal Service...
439 Mounting Kernel Configuration File System...
440 Starting Remount Root and Kernel File Systems...
441 Starting Apply Kernel Variables...
442 Starting udev Coldplug all Devices...
443[ OK ] Mounted Huge Pages File System.
444[ OK ] Mounted POSIX Message Queue File System.
445[ OK ] Mounted Kernel Debug File System.
446[ OK ] Mounted Temporary Directory (/tmp).
447[ OK ] Started Create list of sta? nodes for the current kernel.
448[ OK ] Mounted Kernel Configuration File System.
449[ OK ] Started Remount Root and Kernel File Systems.
450[ OK ] Started Apply Kernel Variables.
451[ OK ] Started LVM2 metadata daemon.
452[ 6.569866] audit: type=1130 audit(1567976192.468:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
453 Starting Load/Save Random Seed...
454 Starting Create Static Device Nodes in /dev...
455[ OK ] Started Journal Service.
456[ 6.637736] audit: type=1130 audit(1567976192.536:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
457 Starting Flush Journal to Persistent Storage...
458[ 6.665885] systemd-journald[254]: Received client request to flush runtime journal.
459[ OK ] Started udev Coldplug all Devices.
460[ 6.682006] systemd-journald[254]: File /var/log/journal/064b5c7a5d474b95b7612fba19f864aa/system.journal corrupted or uncleanly shut down, renaming and replacing.
461[ 6.699810] audit: type=1130 audit(1567976192.596:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
462[ OK ] Started Create Static Device Nodes in /dev.
463 Starting udev Kernel Device Manager...[ 6.739718] audit: type=1130 audit(1567976192.636:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
464
465[ OK ] Started udev Kernel Device Manager.
466[ 7.093669] audit: type=1130 audit(1567976192.992:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
467 Starting Network Service...
468[ OK ] Started Flush Journal to Persistent Storage.
469[ 7.166092] audit: type=1130 audit(1567976193.064:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
470[ OK ] Found device /dev/ttyS2.
471[ 7.320943] rk808-rtc rk808-rtc: registered as rtc0
472[ 7.424375] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
473[ 7.432244] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
474[ 7.503221] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
475[ 7.511172] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
476[ 7.519797] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
477[ 7.528646] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
478[ 7.536060] pci_bus 0000:00: root bus resource [bus 00-1f]
479[ 7.542225] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
480[ 7.549946] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
481[ 7.560674] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
482[ 7.567493] pci 0000:00:00.0: supports D1
483[ 7.571977] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
484[ 7.573648] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
485[ 7.587527] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185
486[ 7.594325] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
487[ 7.602216] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
488[ 7.608279] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
489[ 7.616159] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
490[ 7.622215] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
491[ 7.630094] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
492[ 7.636164] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
493[ 7.644066] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
494[ 7.650139] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
495[ 7.658031] pci 0000:01:00.0: reg 0x20: [io size 0x0010]
496[ 7.664096] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
497[ 7.671129] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
498[ 7.678651] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
499[ 7.698901] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
500[ 7.706323] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
501[ 7.714033] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
502[ 7.722168] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0101ff]
503[ 7.729774] pci 0000:01:00.0: BAR 4: no space for [io size 0x0010]
504[ 7.736785] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0010]
505[ 7.744171] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
506[ 7.751176] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
507[ 7.758590] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
508[ 7.765599] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
509[ 7.772996] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
510[ 7.780043] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
511[ 7.787447] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
512[ 7.794470] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
513[ 7.801871] pci 0000:00:00.0: PCI bridge to [bus 01]
514[ 7.807434] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
515[ 7.815197] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
516[ 7.822238] pcieport 0000:00:00.0: PME: Signaling with IRQ 238
517[ 7.830114] pcieport 0000:00:00.0: AER: enabled with IRQ 238
518[ 7.838129] ahci 0000:01:00.0: enabling device (0000 -> 0002)
519[ 7.844891] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
520[ 7.852645] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
521[ 7.861619] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
522[ 7.872261] scsi host0: ahci
523[ 7.875939] scsi host1: ahci
524[ 7.879298] ata1: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010100 irq 239
525[ 7.887575] ata2: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010180 irq 239
526[ 7.953174] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
527[ OK ] [ 7.960151] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
528Started Network Service.
529[ 7.969952] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
530[ 7.980077] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
531[ 7.986476] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
532[ 7.986673] audit: type=1130 audit(1567976193.884:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
533[ 7.993474] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
534[ 8.022305] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
535[ 8.034260] rk_gmac-dwmac fe300000.ethernet: init for RGMII
536[ 8.040619] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
537[ 8.048646] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
538[ 8.055608] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
539[ 8.064097] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
540[ 8.072515] rk_gmac-dwmac fe300000.ethernet: COE Type 2
541[ 8.074314] panfrost ff9a0000.gpu: clock rate = 500000000
542[ 8.078732] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
543[ 8.084684] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
544[ 8.092285] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
545[ 8.092304] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
546[ 8.101020] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
547[ 8.108180] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
548[ 8.108182] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
549[ OK ] Started Monitoring of LVM2? dmeve[ 8.139723] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
550ntd or progress polling.
551[ 8.159169] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
552[ 8.169586] audit: type=1130 audit(1567976194.068:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
553[ 8.171049] [drm] Initialized panfrost 1.0.0 20180908 for ff9a0000.gpu on minor 0
554[ OK ] Reached target Local File Systems (Pre).
555[[ 8.209897] ata1: SATA link down (SStatus 0 SControl 300)
556 OK ] Reached target Local File Systems.
557 Starting Create Volatile Files and Directories...
558[ 8.253854] rockchip-vop ff8f0000.vop: Adding to iommu group 3
559[ 8.262011] rockchip-vop ff900000.vop: Adding to iommu group 4
560[ 8.266156] libphy: stmmac: probed
561[ 8.273876] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
562[ 8.274077] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
563[ 8.287976] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
564[ 8.299754] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
565[ 8.323018] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
566[ 8.334729] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
567[ OK [ 8.344012] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
568] Started Create Volatile Files and Directories.
569[ 8.356038] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
570[ 8.362626] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet]
571[ 8.369536] [drm] No driver support for vblank timestamp query.
572[ 8.369576] [drm] Cannot find any crtc or sizes
573[ 8.380476] audit: type=1130 audit(1567976194.276:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
574[ 8.387318] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
575 Starting Network Name Resolution...
576[ 8.430522] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
577[ 8.439055] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
578[ 8.446730] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
579 Starting Network Time Synchronization...[ 8.458855] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
580
581[ 8.469950] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
582 Starting Update UTMP about System Boot/Shutdown...
583[ 8.506450] audit: type=1127 audit(1567976194.404:11): pid=325 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
584[ OK ] Reached target Sound Card.
585[ OK ] Started Update UTMP about System Boot/Shutdown.
586[ 8.693348] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
587[ 8.700500] ata2.00: ATA-10: KINGSTON SA400S37120G, SBFKB1E1, max UDMA/133
588[ 8.708229] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
589[ 8.716008] ata2.00: configured for UDMA/133
590[ 8.731087] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1E1 PQ: 0 ANSI: 5
591[ 8.741867] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
592[ OK ] Started Network Time Synchronizatio[ 8.750407] sd 1:0:0:0: [sda] Write Protect is off
593n.
594[ 8.762005] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
595[ OK [ 8.774391] sda: sda1
596] Reached target System Time Set.
597[ 8.778911] sd 1:0:0:0: [sda] Attached SCSI disk
598[ OK ] Reached target System Time Synchronized.
599[ OK ] Started Network Name Resolution.
600[ OK ] Reached target Network.
601[ OK ] Reached target Host and Network Name Lookups.
602[ 9.405494] [drm] Cannot find any crtc or sizes
603[ 12.542048] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
604[ 12.551707] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
605[ *** ] A start job is running for Load/Save Random Seed (15s / 10min)
606[ 21.309432] random: crng init done
607[ OK ] Started Load/Save Random Seed.
608[ 21.364185] kauditd_printk_skb: 3 callbacks suppressed
609[ 21.364189] audit: type=1130 audit(1568631274.292:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
610 Starting Entropy Harvesting Daemon...
611[ OK ] Started Entropy Harvesting Daemon.
612[ 21.422069] audit: type=1130 audit(1568631274.352:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
613[ OK ] Reached target System Initialization.
614[ OK ] Started Daily rotation of log files.
615[ OK ] Started Daily man-db regeneration.
616[ OK ] Started Daily verification of password and group files.
617[ OK ] Started Daily Cleanup of Temporary Directories.
618[ OK ] Reached target Timers.
619[ OK ] Listening on D-Bus System Message Bus Socket.
620[ OK ] Reached target Sockets.
621[ OK ] Reached target Basic System.
622[ OK ] Started D-Bus System Message Bus.
623[ 21.595041] audit: type=1130 audit(1568631274.524:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
624[ OK ] Started OpenSSH Daemon.
625[ 21.633927] audit: type=1130 audit(1568631274.564:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
626 Starting Login Service...
627 Starting Permit User Sessions...
628[ OK ] Started Permit User Sessions.
629[ 21.769687] audit: type=1130 audit(1568631274.700:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
630[ 21.789312] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
631[ OK ] Started Getty on tty1.
632[ 21.812394] audit: type=1130 audit(1568631274.740:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
633[ OK ] Started Serial Getty on ttyS2.
634[ 21.849833] audit: type=1130 audit(1568631274.780:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=serial-getty@ttyS2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
635[ OK ] Reached target Login Prompts.
636[ OK ] Started Login Service.
637[ 22.138167] audit: type=1130 audit(1568631275.068:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
638[ OK ] Reached target Multi-User System.
639[ OK ] Reached target Graphical Interface.
640
641Arch Linux 5.3.0-xn1ml1 (ttyS2)
642
643alarm login: