· 7 years ago · May 25, 2018, 01:22 PM
1# Use this hook to configure devise mailer, warden hooks and so forth.
2# Many of these configuration options can be set straight in your model.
3Devise.setup do |config|
4 # The secret key used by Devise. Devise uses this key to generate
5 # random tokens. Changing this key will render invalid all existing
6 # confirmation, reset password and unlock tokens in the database.
7 # Devise will use the `secret_key_base` as its `secret_key`
8 # by default. You can change it below and use your own secret key.
9 # config.secret_key = '0823f8dc927308f93801d86d5e1255a847409574e73a744b5c858905635dd77c3504c2c1829a31d503995f78969594b68783ed89d91fbe9e32f4aedf12e2ae7d'
10
11 # ==> Mailer Configuration
12 # Configure the e-mail address which will be shown in Devise::Mailer,
13 # note that it will be overwritten if you use your own mailer class
14 # with default "from" parameter.
15 config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com'
16
17 # Configure the class responsible to send e-mails.
18 # config.mailer = 'Devise::Mailer'
19
20 # Configure the parent class responsible to send e-mails.
21 config.parent_mailer = 'ApplicationMailer'
22
23 # ==> ORM configuration
24 # Load and configure the ORM. Supports :active_record (default) and
25 # :mongoid (bson_ext recommended) by default. Other ORMs may be
26 # available as additional gems.
27 require 'devise/orm/active_record'
28
29 # ==> Configuration for any authentication mechanism
30 # Configure which keys are used when authenticating a user. The default is
31 # just :email. You can configure it to use [:username, :subdomain], so for
32 # authenticating a user, both parameters are required. Remember that those
33 # parameters are used only when authenticating and not when retrieving from
34 # session. If you need permissions, you should implement that in a before filter.
35 # You can also supply a hash where the value is a boolean determining whether
36 # or not authentication should be aborted when the value is not present.
37 # config.authentication_keys = [:email]
38
39 # Configure parameters from the request object used for authentication. Each entry
40 # given should be a request method and it will automatically be passed to the
41 # find_for_authentication method and considered in your model lookup. For instance,
42 # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
43 # The same considerations mentioned for authentication_keys also apply to request_keys.
44 # config.request_keys = []
45
46 # Configure which authentication keys should be case-insensitive.
47 # These keys will be downcased upon creating or modifying a user and when used
48 # to authenticate or find a user. Default is :email.
49 config.case_insensitive_keys = [:email]
50
51 # Configure which authentication keys should have whitespace stripped.
52 # These keys will have whitespace before and after removed upon creating or
53 # modifying a user and when used to authenticate or find a user. Default is :email.
54 config.strip_whitespace_keys = [:email]
55
56 # Tell if authentication through request.params is enabled. True by default.
57 # It can be set to an array that will enable params authentication only for the
58 # given strategies, for example, `config.params_authenticatable = [:database]` will
59 # enable it only for database (email + password) authentication.
60 # config.params_authenticatable = true
61
62 # Tell if authentication through HTTP Auth is enabled. False by default.
63 # It can be set to an array that will enable http authentication only for the
64 # given strategies, for example, `config.http_authenticatable = [:database]` will
65 # enable it only for database authentication. The supported strategies are:
66 # :database = Support basic authentication with authentication key + password
67 # config.http_authenticatable = false
68
69 # If 401 status code should be returned for AJAX requests. True by default.
70 config.http_authenticatable_on_xhr = false
71
72 # The realm used in Http Basic Authentication. 'Application' by default.
73 # config.http_authentication_realm = 'Application'
74
75 # It will change confirmation, password recovery and other workflows
76 # to behave the same regardless if the e-mail provided was right or wrong.
77 # Does not affect registerable.
78 # config.paranoid = true
79
80 # By default Devise will store the user in session. You can skip storage for
81 # particular strategies by setting this option.
82 # Notice that if you are skipping storage for all authentication paths, you
83 # may want to disable generating routes to Devise's sessions controller by
84 # passing skip: :sessions to `devise_for` in your config/routes.rb
85 config.skip_session_storage = [:http_auth]
86
87 # By default, Devise cleans up the CSRF token on authentication to
88 # avoid CSRF token fixation attacks. This means that, when using AJAX
89 # requests for sign in and sign up, you need to get a new CSRF token
90 # from the server. You can disable this option at your own risk.
91 # config.clean_up_csrf_token_on_authentication = true
92
93 # When false, Devise will not attempt to reload routes on eager load.
94 # This can reduce the time taken to boot the app but if your application
95 # requires the Devise mappings to be loaded during boot time the application
96 # won't boot properly.
97 # config.reload_routes = true
98
99 # ==> Configuration for :database_authenticatable
100 # For bcrypt, this is the cost for hashing the password and defaults to 11. If
101 # using other algorithms, it sets how many times you want the password to be hashed.
102 #
103 # Limiting the stretches to just one in testing will increase the performance of
104 # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
105 # a value less than 10 in other environments. Note that, for bcrypt (the default
106 # algorithm), the cost increases exponentially with the number of stretches (e.g.
107 # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
108 config.stretches = Rails.env.test? ? 1 : 11
109
110 # Set up a pepper to generate the hashed password.
111 # config.pepper = '465d63eea6e786ed2862f0447be58e0b57e7869a0262aa618c932647e265182a4bdd5b7c04a7a43cdc871c7fced30f5ceb431fa746521884d0b9897b83735581'
112
113 # Send a notification to the original email when the user's email is changed.
114 config.send_email_changed_notification = true
115
116 # Send a notification email when the user's password is changed.
117 config.send_password_change_notification = true
118
119 # ==> Configuration for :confirmable
120 # A period that the user is allowed to access the website even without
121 # confirming their account. For instance, if set to 2.days, the user will be
122 # able to access the website for two days without confirming their account,
123 # access will be blocked just in the third day. Default is 0.days, meaning
124 # the user cannot access the website without confirming their account.
125 # config.allow_unconfirmed_access_for = 2.days
126
127 # A period that the user is allowed to confirm their account before their
128 # token becomes invalid. For example, if set to 3.days, the user can confirm
129 # their account within 3 days after the mail was sent, but on the fourth day
130 # their account can't be confirmed with the token any more.
131 # Default is nil, meaning there is no restriction on how long a user can take
132 # before confirming their account.
133 # config.confirm_within = 3.days
134
135 # If true, requires any email changes to be confirmed (exactly the same way as
136 # initial account confirmation) to be applied. Requires additional unconfirmed_email
137 # db field (see migrations). Until confirmed, new email is stored in
138 # unconfirmed_email column, and copied to email column on successful confirmation.
139 config.reconfirmable = true
140
141 # Defines which key will be used when confirming an account
142 # config.confirmation_keys = [:email]
143
144 # ==> Configuration for :rememberable
145 # The time the user will be remembered without asking for credentials again.
146 # config.remember_for = 2.weeks
147
148 # Invalidates all the remember me tokens when the user signs out.
149 config.expire_all_remember_me_on_sign_out = true
150
151 # If true, extends the user's remember period when remembered via cookie.
152 # config.extend_remember_period = false
153
154 # Options to be passed to the created cookie. For instance, you can set
155 # secure: true in order to force SSL only cookies.
156 # config.rememberable_options = {}
157
158 # ==> Configuration for :validatable
159 # Range for password length.
160 config.password_length = 6..128
161
162 # Email regex used to validate email formats. It simply asserts that
163 # one (and only one) @ exists in the given string. This is mainly
164 # to give user feedback and not to assert the e-mail validity.
165 config.email_regexp = /\A[^@\s]+@[^@\s]+\z/
166
167 # ==> Configuration for :timeoutable
168 # The time you want to timeout the user session without activity. After this
169 # time the user will be asked for credentials again. Default is 30 minutes.
170 # config.timeout_in = 30.minutes
171
172 # ==> Configuration for :lockable
173 # Defines which strategy will be used to lock an account.
174 # :failed_attempts = Locks an account after a number of failed attempts to sign in.
175 # :none = No lock strategy. You should handle locking by yourself.
176 # config.lock_strategy = :failed_attempts
177
178 # Defines which key will be used when locking and unlocking an account
179 # config.unlock_keys = [:email]
180
181 # Defines which strategy will be used to unlock an account.
182 # :email = Sends an unlock link to the user email
183 # :time = Re-enables login after a certain amount of time (see :unlock_in below)
184 # :both = Enables both strategies
185 # :none = No unlock strategy. You should handle unlocking by yourself.
186 # config.unlock_strategy = :both
187
188 # Number of authentication tries before locking an account if lock_strategy
189 # is failed attempts.
190 # config.maximum_attempts = 20
191
192 # Time interval to unlock the account if :time is enabled as unlock_strategy.
193 # config.unlock_in = 1.hour
194
195 # Warn on the last attempt before the account is locked.
196 # config.last_attempt_warning = true
197
198 # ==> Configuration for :recoverable
199 #
200 # Defines which key will be used when recovering the password for an account
201 # config.reset_password_keys = [:email]
202
203 # Time interval you can reset your password with a reset password key.
204 # Don't put a too small interval or your users won't have the time to
205 # change their passwords.
206 config.reset_password_within = 6.hours
207
208 # When set to false, does not sign a user in automatically after their password is
209 # reset. Defaults to true, so a user is signed in automatically after a reset.
210 # config.sign_in_after_reset_password = true
211
212 # ==> Configuration for :encryptable
213 # Allow you to use another hashing or encryption algorithm besides bcrypt (default).
214 # You can use :sha1, :sha512 or algorithms from others authentication tools as
215 # :clearance_sha1, :authlogic_sha512 (then you should set stretches above to 20
216 # for default behavior) and :restful_authentication_sha1 (then you should set
217 # stretches to 10, and copy REST_AUTH_SITE_KEY to pepper).
218 #
219 # Require the `devise-encryptable` gem when using anything other than bcrypt
220 # config.encryptor = :sha512
221
222 # ==> Scopes configuration
223 # Turn scoped views on. Before rendering "sessions/new", it will first check for
224 # "users/sessions/new". It's turned off by default because it's slower if you
225 # are using only default views.
226 # config.scoped_views = false
227
228 # Configure the default scope given to Warden. By default it's the first
229 # devise role declared in your routes (usually :user).
230 # config.default_scope = :user
231
232 # Set this configuration to false if you want /users/sign_out to sign out
233 # only the current scope. By default, Devise signs out all scopes.
234 # config.sign_out_all_scopes = true
235
236 # ==> Navigation configuration
237 # Lists the formats that should be treated as navigational. Formats like
238 # :html, should redirect to the sign in page when the user does not have
239 # access, but formats like :xml or :json, should return 401.
240 #
241 # If you have any extra navigational formats, like :iphone or :mobile, you
242 # should add them to the navigational formats lists.
243 #
244 # The "*/*" below is required to match Internet Explorer requests.
245 config.navigational_formats = ['*/*', :html, :json]
246
247 # The default HTTP method used to sign out a resource. Default is :delete.
248 config.sign_out_via = :delete
249
250 # ==> OmniAuth
251 # Add a new OmniAuth provider. Check the wiki for more information on setting
252 # up on your models and hooks.
253 # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
254
255 # ==> Warden configuration
256 # If you want to use other strategies, that are not supported by Devise, or
257 # change the failure app, you can configure them inside the config.warden block.
258 #
259 # config.warden do |manager|
260 # manager.intercept_401 = false
261 # manager.default_strategies(scope: :user).unshift :some_external_strategy
262 # end
263
264 # ==> Mountable engine configurations
265 # When using Devise inside an engine, let's call it `MyEngine`, and this engine
266 # is mountable, there are some extra configurations to be taken into account.
267 # The following options are available, assuming the engine is mounted as:
268 #
269 # mount MyEngine, at: '/my_engine'
270 #
271 # The router that invoked `devise_for`, in the example above, would be:
272 # config.router_name = :my_engine
273 #
274 # When using OmniAuth, Devise cannot automatically set OmniAuth path,
275 # so you need to do it manually. For the users scope, it would be:
276 # config.omniauth_path_prefix = '/my_engine/users/auth'
277end