· 6 years ago · Nov 06, 2019, 10:59 AM
1Starting kernel at 0x40008000...
2
3switch_init: uart_sel(0)
4<6>[ 0.000000] c0 Initializing cgroup subsys cpuset
5<6>[ 0.000000] c0 Initializing cgroup subsys cpu
6<5>[ 0.000000] c0 Linux version 3.0.101-HTML6405-N8000 (office@mhs-solutions.at) (gcc version 4.8 (GCC) ) #6 SMP PREEMPT Wed Nov 6 09:32:05 CET 2019
7<4>[ 0.000000] c0 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
8<4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
9<4>[ 0.000000] c0 Machine: SMDK4x12
10<6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 6b000000
11<6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
12<4>[ 0.000000] c0 CPU EXYNOS4412 (id 0xe4412211)
13<7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
14<6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
15<3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
16<3>[ 0.000000] c0 audiocdclk: no parent clock specified
17<3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
18<7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
19<7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
20<6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
21<6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
22<6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
23<6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
24<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
25<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
26<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
27<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
28<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
29<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
30<6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
31<6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
32<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
33<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
34<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
35<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
36<6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 66666666
37<6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
38<6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 66666666
39<6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
40<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
41<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
42<6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
43<6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
44<6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
45<6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
46<6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
47<6>[ 0.000000] c0 S5P/CMA: Reserved 0x68000000/0x00c00000 for 'fimc_is'
48<6>[ 0.000000] c0 S5P/CMA: Reserved 0x6a700000/0x00800000 for 'fimd'
49<6>[ 0.000000] c0 S5P/CMA: Reserved 0x69b00000/0x00c00000 for 'fimc0'
50<6>[ 0.000000] c0 S5P/CMA: Reserved 0x69a00000/0x00100000 for 'srp'
51<6>[ 0.000000] c0 S5P/CMA: Reserved 0x65c00000/0x01810000 for 'fimc1'
52<6>[ 0.000000] c0 S5P/CMA: Reserved 0x64000000/0x00a00000 for 'mfc-normal'
53<6>[ 0.000000] c0 S5P/CMA: Reserving 0x8000000 for secure region aligned by 0x4000000.
54<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5c000000/0x00200000 for 'sectbl'
55<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5c200000/0x02e00000 for 'mfc-secure'
56<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5f000000/0x05000000 for 'ion'
57<0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
58<0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
59<7>[ 0.000000] c0 On node 0 totalpages: 523264
60<7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0d18020, node_mem_map c0d7c000
61<7>[ 0.000000] c0 Normal zone: 1584 pages used for memmap
62<7>[ 0.000000] c0 Normal zone: 0 pages reserved
63<7>[ 0.000000] c0 Normal zone: 178640 pages, LIFO batch:31
64<7>[ 0.000000] c0 HighMem zone: 3015 pages used for memmap
65<7>[ 0.000000] c0 HighMem zone: 340025 pages, LIFO batch:31
66<6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
67<6>[ 0.000000] c0 PERCPU: Embedded 8 pages/cpu @c1f8b000 s9184 r8192 d15392 u32768
68<7>[ 0.000000] c0 pcpu-alloc: s9184 r8192 d15392 u32768 alloc=8*4096
69<7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
70<6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 518665
71<5>[ 0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 console=ttySAC2,115200 loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 sysscope=0xff000000 lcdtype=2 consoleblank=0 lpj=3981312 vmalloc=256m oops=panic pmic_info=1 cordon=e1d82496485666cd4af37f39a2d14835 connie=GT-N8000_OPEN_EUR_648b22a5d2e31930d24a89ca23846bf9 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N8000XXUDNE4 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4dfc3d39868641fb snd_soc_core.pmdown_time=1000
72<6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:11d5 sec_log_buf:fd200000 sec_log_size:2097152
73<6>[ 0.000000] c0 sec_log_save_old: saved old log at 4565@c1fab180
74<6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
75<6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
76<6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
77<6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
78<6>[ 0.000000] c0 allocated 8372224 bytes of page_cgroup
79<6>[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
80<6>[ 0.000000] c0 Memory: 2044MB = 2044MB total
81<5>[ 0.000000] c0 Memory: 1832752k/1832752k available, 260304k reserved, 1372160K highmem
82<5>[ 0.000000] c0 Virtual kernel memory layout:
83<5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
84<5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
85<5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
86<5>[ 0.000000] c0 vmalloc : 0xec800000 - 0xfc000000 ( 248 MB)
87<5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
88<5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
89<5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
90<5>[ 0.000000] c0 .init : 0xc0008000 - 0xc0052000 ( 296 kB)
91<5>[ 0.000000] c0 .text : 0xc0052000 - 0xc0ad0000 (10744 kB)
92<5>[ 0.000000] c0 .data : 0xc0ad0000 - 0xc0d2c2a0 (2417 kB)
93<5>[ 0.000000] c0 .bss : 0xc0d2c2c4 - 0xc0d7b938 ( 318 kB)
94<6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
95<6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
96<6>[ 0.000000] c0 NR_IRQS:501
97<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
98<6>[ 0.000000] c0 Console: colour dummy device 80x30
99<6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 796.26 BogoMIPS (lpj=3981312)
100<6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
101<6>[ 0.000000] c0 Security Framework initialized
102<6>[ 0.000000] c0 AppArmor: AppArmor initialized
103<6>[ 0.000000] c0 Mount-cache hash table entries: 512
104<6>[ 0.000000] c0 Initializing cgroup subsys debug
105<6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
106<6>[ 0.000000] c0 Initializing cgroup subsys memory
107<6>[ 0.000000] c0 Initializing cgroup subsys devices
108<6>[ 0.000000] c0 Initializing cgroup subsys freezer
109<6>[ 0.000000] c0 Initializing cgroup subsys blkio
110<6>[ 0.000000] c0 Initializing cgroup subsys perf_event
111<6>[ 0.000000] c0 Initializing cgroup subsys bfqio
112<6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
113<6>[ 0.000000] c0 CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
114<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
115<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
116<6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
117<6>[ 0.000000] c0 L310 cache controller enabled
118<6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
119<4>[ 0.060000] c1 CPU1: Booted secondary processor
120<4>[ 0.060000] c1 CPU1: Booted secondary processor
121<6>[ 0.060000] c1 CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
122<6>[ 0.060000] c1 notifier_call_chain : NOTIFY BAD tick_notify
123<4>[ 0.120000] c2 CPU2: Booted secondary processor
124<4>[ 0.120000] c2 CPU2: Booted secondary processor
125<6>[ 0.120000] c2 CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
126<6>[ 0.120000] c2 notifier_call_chain : NOTIFY BAD tick_notify
127<4>[ 0.180000] c3 CPU3: Booted secondary processor
128<4>[ 0.180000] c3 CPU3: Booted secondary processor
129<6>[ 0.180000] c3 CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
130<6>[ 0.180000] c3 notifier_call_chain : NOTIFY BAD tick_notify
131<6>[ 0.200000] c0 Brought up 4 CPUs
132<6>[ 0.200000] c0 SMP: Total of 4 processors activated (3185.04 BogoMIPS).
133<6>[ 0.200000] c0 devtmpfs: initialized
134<3>[ 0.200000] c0 gpio: GPK0 has missing PM functions
135<6>[ 0.200000] c0 print_constraints: dummy:
136<6>[ 0.210000] c0 NET: Registered protocol family 16
137<7>[ 0.210000] c0 migrating range 6b000 6b280, retry (0)
138<6>[ 0.260000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
139<6>[ 0.260000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
140<6>[ 0.260000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
141<7>[ 0.260000] c0 midas_config_gpio_table
142<6>[ 0.260000] c0 midas_power_init
143<7>[ 0.260000] c0 [TSP] p4_tsp_init rev : 6
144<7>[ 0.260000] c0 [TSP] TSP IC : Atmel
145<6>[ 0.260000] c0 Registered chained gpio int handler for interrupt 110.
146<6>[ 0.270000] c0 Registered interrupt support for gpio group 25.
147<6>[ 0.270000] c0 Registered chained gpio int handler for interrupt 111.
148<6>[ 0.270000] c0 Registered interrupt support for gpio group 4.
149<6>[ 0.270000] c0 Sound: start midas_sound_init
150<6>[ 0.270000] c0 midas_machine_init() register sii9234 driver
151<7>[ 0.270000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=2
152<6>[ 0.270000] c0 cam_cfg_init
153<4>[ 0.270000] c0 brcm_wlan_init: start
154<4>[ 0.270000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
155<4>[ 0.270000] c0 -----------------------------------------------------
156<4>[ 0.270000] c0 -----------------------------------------------------
157<4>[ 0.270000] c0 -----------------------------------------------------
158<4>[ 0.270000] c0 regist ret:0
159<3>[ 0.270000] c0 ram_console: invalid start 0 or end 0
160<6>[ 0.280000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
161<6>[ 0.280000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
162<6>[ 0.280000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
163<6>[ 0.280000] c0 exynos4_pmu_init: PMU supports 4412(96)
164<6>[ 0.280000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
165<6>[ 0.280000] c0 EXYNOS4: Initializing architecture
166<4>[ 0.280000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
167<6>[ 0.280000] c0 s3c-adc samsung-adc-v4: attached adc driver
168<6>[ 0.280000] c0 samsung-pd samsung-pd.0: power domain registered
169<6>[ 0.280000] c0 samsung-pd samsung-pd.1: power domain registered
170<6>[ 0.280000] c0 samsung-pd samsung-pd.2: power domain registered
171<6>[ 0.280000] c0 lcd0 disable skip only one time
172<6>[ 0.280000] c0 samsung-pd samsung-pd.5: power domain registered
173<6>[ 0.280000] c0 samsung-pd samsung-pd.4: power domain registered
174<6>[ 0.280000] c0 samsung-pd samsung-pd.6: power domain registered
175<6>[ 0.280000] c0 samsung-pd samsung-pd.8: power domain registered
176<6>[ 0.280000] c0 samsung-pd samsung-pd.7: power domain registered
177<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
178<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
179<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
180<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
181<6>[ 0.280000] c0 Switching to clocksource mct-frc
182<6>[ 0.280816] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
183<6>[ 0.280910] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
184<6>[ 0.280993] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
185<6>[ 0.281075] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
186<6>[ 0.281158] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
187<6>[ 0.281237] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
188<6>[ 0.281307] c0 Switched to NOHz mode on CPU #0
189<6>[ 0.281387] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
190<6>[ 0.281472] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
191<6>[ 0.281554] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
192<6>[ 0.281624] c0 s5p-sysmmu s5p-sysmmu.16: Initialized for exynos4-fimc-is.
193<6>[ 0.281696] c0 s5p-sysmmu s5p-sysmmu.17: Initialized for exynos4-fimc-is.
194<6>[ 0.281736] c3 Switched to NOHz mode on CPU #3
195<6>[ 0.281764] c2 Switched to NOHz mode on CPU #2
196<6>[ 0.281806] c1 Switched to NOHz mode on CPU #1
197<6>[ 0.281835] c0 s5p-sysmmu s5p-sysmmu.18: Initialized for exynos4-fimc-is.
198<6>[ 0.281915] c0 s5p-sysmmu s5p-sysmmu.19: Initialized for exynos4-fimc-is.
199<6>[ 0.319778] c0 bio: create slab <bio-0> at 0
200<6>[ 0.320583] c0 print_constraints: VBATT: 5000 mV
201<7>[ 0.320850] c0 max77686_pmic_init
202<5>[ 0.322538] c0 SCSI subsystem initialized
203<6>[ 0.322899] c0 usbcore: registered new interface driver usbfs
204<6>[ 0.323242] c0 usbcore: registered new interface driver hub
205<6>[ 0.323492] c0 usbcore: registered new device driver usb
206<6>[ 0.324178] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
207<6>[ 0.324587] c0 i2c-gpio i2c-gpio.13: using pins 266 (SDA) and 267 (SCL)
208<6>[ 0.324995] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
209<6>[ 0.325252] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
210<6>[ 0.325488] c0 i2c-gpio i2c-gpio.16: using pins 91 (SDA) and 89 (SCL)
211<6>[ 0.325891] c0 i2c-gpio i2c-gpio.17: using pins 258 (SDA) and 259 (SCL)
212<6>[ 0.326318] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
213<6>[ 0.326753] c0 i2c-gpio i2c-gpio.19: using pins 282 (SDA) and 281 (SCL)
214<6>[ 0.326998] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
215<6>[ 0.327511] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
216<6>[ 0.327821] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
217<6>[ 0.328282] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
218<6>[ 0.328739] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
219<6>[ 0.329212] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
220<6>[ 0.329842] c0 max77686 7-0009: device found
221<6>[ 0.330081] c0 max77686_irq_init+
222<6>[ 0.330110] c0 max77686_irq_init: gpio_irq=1
223<6>[ 0.335876] c0 max77686_irq_init-
224<7>[ 0.336156] c0 max77686_pmic_probe
225<7>[ 0.337071] c0 max77686_pmic_probe: DEVICE ID=0x2
226<6>[ 0.340284] c0 print_constraints: vdd_mif range: 850 <--> 1050 mV at 1000 mV
227<6>[ 0.340981] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
228<6>[ 0.341659] c0 print_constraints: vdd_int range: 850 <--> 1100 mV at 1000 mV
229<6>[ 0.342349] c0 print_constraints: vdd_g3d range: 850 <--> 1075 mV at 1000 mV
230<6>[ 0.342618] c0 print_constraints: 3MP_CORE_1.2V: 1200 mV
231<6>[ 0.343537] c0 print_constraints: VCC_1.8V_AP: 1800 mV
232<6>[ 0.344193] c0 print_constraints: VCC_1.8V_IO: 1800 mV
233<6>[ 0.345078] c0 print_constraints: VMIPI_1.0V: 1000 mV
234<6>[ 0.345981] c0 print_constraints: VLED_IC_1.9V: 1950 mV
235<6>[ 0.346903] c0 print_constraints: VMIPI_1.8V: 1800 mV
236<6>[ 0.347808] c0 print_constraints: VABB1_1.9V: 1950 mV
237<6>[ 0.348707] c0 print_constraints: VUOTG_3.0V: 3000 mV
238<6>[ 0.349596] c0 print_constraints: VABB2_1.9V: 1950 mV
239<6>[ 0.350270] c0 print_constraints: CAM_IO_1.8V: 1800 mV
240<6>[ 0.350917] c0 print_constraints: VT_CORE_1.8V: 1800 mV
241<6>[ 0.351564] c0 print_constraints: VTF_2.8V: 2800 mV
242<6>[ 0.352466] c0 print_constraints: VDD_ADC_3.3V: 3300 mV
243<6>[ 0.353123] c0 print_constraints: CAM_A2.8V: 2800 mV
244<6>[ 0.353776] c0 print_constraints: VLED_3.3V: 3300 mV
245<6>[ 0.354432] c0 print_constraints: 3MP_AF_2.8V: 2800 mV
246<6>[ 0.354951] c0 print_constraints: 32KHZ_PMIC:
247<6>[ 0.355286] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
248<3>[ 0.355893] c0 max77686 5-0009: device not found on this channel (this is not an error)
249<6>[ 0.355952] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
250<6>[ 0.356294] c0 fg_i2c_probe: fuelgauge driver loading
251<6>[ 0.356324] c0 Fuel gauge attach success!!!
252<6>[ 0.356727] c0 fg_set_battery_type: DesignCAP(0x4996), Battery type(SDI)
253<6>[ 0.358601] c0 fg_read_soc: soc(9), psoc(942), vfsoc(7)
254<6>[ 0.412557] c0 [FG_Model]
255<6>[ 0.420152] c0 0x7df0,
256<6>[ 0.420170] c0 0xb500,
257<6>[ 0.420188] c0 0xb860,
258<6>[ 0.420205] c0 0xb930,
259<6>[ 0.420221] c0 0xb980,
260<6>[ 0.420238] c0 0xbb70,
261<6>[ 0.420255] c0 0xbc00,
262<6>[ 0.420271] c0 0xbc70,
263<6>[ 0.420288] c0 0xbd20,
264<6>[ 0.420304] c0 0xbdb0,
265<6>[ 0.420321] c0 0xbef0,
266<6>[ 0.420337] c0 0xc140,
267<6>[ 0.420354] c0 0xc3c0,
268<6>[ 0.420371] c0 0xc6e0,
269<6>[ 0.420387] c0 0xcd20,
270<6>[ 0.420404] c0 0xd100,
271<6>[ 0.420421] c0 0x0020,
272<6>[ 0.420438] c0 0x0340,
273<6>[ 0.420455] c0 0x15d0,
274<6>[ 0.420471] c0 0x2dd0,
275<6>[ 0.420488] c0 0x0600,
276<6>[ 0.420504] c0 0x18f0,
277<6>[ 0.420521] c0 0x25a0,
278<6>[ 0.420537] c0 0x1800,
279<6>[ 0.420554] c0 0x22a0,
280<6>[ 0.420570] c0 0x1670,
281<6>[ 0.420587] c0 0x09a0,
282<6>[ 0.420603] c0 0x08c0,
283<6>[ 0.420620] c0 0x0b30,
284<6>[ 0.420636] c0 0x04f0,
285<6>[ 0.420653] c0 0x0870,
286<6>[ 0.420670] c0 0x0870,
287<6>[ 0.420687] c0 0x0200,
288<6>[ 0.420704] c0 0x0200,
289<6>[ 0.420720] c0 0x0200,
290<6>[ 0.420737] c0 0x0200,
291<6>[ 0.420753] c0 0x0200,
292<6>[ 0.420770] c0 0x0200,
293<6>[ 0.420786] c0 0x0200,
294<6>[ 0.420803] c0 0x0200,
295<6>[ 0.420819] c0 0x0200,
296<6>[ 0.420836] c0 0x0200,
297<6>[ 0.420852] c0 0x0200,
298<6>[ 0.420869] c0 0x0200,
299<6>[ 0.420885] c0 0x0200,
300<6>[ 0.420902] c0 0x0200,
301<6>[ 0.420918] c0 0x0200,
302<6>[ 0.420935] c0 0x0200
303<6>[ 0.428531] c0 [MAX17042] 1/1/1970 00:00,
304<6>[ 0.434458] c0 0000h,ff00h,7f80h,ff01h,0000h,0534h,096ch,4ae7h,
305<6>[ 0.434489] c0 1ad0h,b75ch,fdd4h,fea7h,0006h,0714h,096ch,053ah,
306<6>[ 0.465957] c0 3730h,1ee3h,7d5ah,0000h,0318h,0148h,1abdh,00a9h,
307<6>[ 0.465987] c0 4996h,b7b3h,2114h,c87bh,2ed6h,2214h,0600h,0534h,
308<6>[ 0.495929] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7dd6h,
309<6>[ 0.495960] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
310<6>[ 0.525932] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
311<6>[ 0.525962] c0 0076h,1a1ch,007dh,0502h,1680h,5408h,5f5ch,e000h,
312<6>[ 0.555929] c0 d000h,2350h,f723h,6700h,b7a4h,12eah,337eh,ffa9h,
313<6>[ 0.555959] c0 0787h,4ed0h,054eh,5500h,054dh,052eh,02e3h,749dh,
314<6>[ 0.585923] c0 082ch,3a00h,0100h,0007h,00a6h,fea0h,0160h,0003h,
315<6>[ 0.585953] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
316<6>[ 0.615930] c0 0000h,0000h,0000h,0000h,0000h,0000h,0714h,0890h,
317<6>[ 0.615960] c0 3eebh,4cd7h,fcf5h,b8e2h,0070h,3910h,b738h,0730h,
318<6>[ 0.640042] c0
319<6>[ 0.641128] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
320<6>[ 0.642030] c0 Bluetooth: Core ver 2.16
321<6>[ 0.642215] c0 NET: Registered protocol family 31
322<6>[ 0.642245] c0 Bluetooth: HCI device and connection manager initialized
323<6>[ 0.642285] c0 Bluetooth: HCI socket layer initialized
324<6>[ 0.642317] c0 Bluetooth: L2CAP socket layer initialized
325<6>[ 0.642365] c0 Bluetooth: SCO socket layer initialized
326<6>[ 0.642853] c0 cfg80211: Calling CRDA to update world regulatory domain
327<6>[ 0.643078] c0 NetLabel: Initializing
328<6>[ 0.643105] c0 NetLabel: domain hash size = 128
329<6>[ 0.643132] c0 NetLabel: protocols = UNLABELED CIPSOv4
330<6>[ 0.643200] c0 NetLabel: unlabeled traffic allowed by default
331<6>[ 0.643796] c0 AppArmor: AppArmor Filesystem Enabled
332<6>[ 0.660369] c0 NET: Registered protocol family 2
333<6>[ 0.660640] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
334<6>[ 0.661493] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
335<6>[ 0.663397] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
336<6>[ 0.664422] c0 TCP: Hash tables configured (established 131072 bind 65536)
337<6>[ 0.664461] c0 TCP reno registered
338<6>[ 0.664489] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
339<6>[ 0.664550] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
340<6>[ 0.665006] c0 NET: Registered protocol family 1
341<6>[ 0.665387] c0 RPC: Registered named UNIX socket transport module.
342<6>[ 0.665424] c0 RPC: Registered udp transport module.
343<6>[ 0.665454] c0 RPC: Registered tcp transport module.
344<6>[ 0.665484] c0 RPC: Registered tcp NFSv4.1 backchannel transport module.
345<6>[ 0.665690] c0 Trying to unpack rootfs image as initramfs...
346<6>[ 0.703003] c0 Freeing initrd memory: 648K
347<6>[ 0.703136] c0 PMU: registered new PMU device of type 0
348<6>[ 0.703392] c0 Exynos4 : ARM Clock down on idle mode is enabled
349<6>[ 0.705623] c0 init_gpio: uart_sel(0)
350<6>[ 0.705860] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
351<6>[ 0.706077] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
352<6>[ 0.706293] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
353<6>[ 0.706512] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
354<6>[ 0.706726] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
355<7>[ 0.707353] c0 gps_bcm475x_init - system_rev : 6
356<6>[ 0.707383] c0 accel_gpio_init
357<6>[ 0.707408] c0 gyro_gpio_init
358<6>[ 0.707614] c0 i2c 1-0019: i2c_add_devices - added lsm330dlc_accel successfully
359<6>[ 0.707834] c0 i2c 1-006b: i2c_add_devices - added lsm330dlc_gyro successfully
360<6>[ 0.708053] c0 i2c 9-0023: i2c_add_devices - added bh1721fvc successfully
361<6>[ 0.708261] c0 i2c 9-001c: i2c_add_devices - added AL3201 successfully
362<6>[ 0.708299] c0 ak8975c_gpio_init
363<6>[ 0.708339] c0 Registered interrupt support for gpio group 27.
364<6>[ 0.708561] c0 i2c 10-000c: i2c_add_devices - added ak8975 successfully
365<6>[ 0.709670] c0 wake enabled for irq 374
366<6>[ 0.709916] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
367<7>[ 0.710485] c0 migrating range 6b280 6b281, retry (0)
368<6>[ 0.734791] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
369<6>[ 0.734827] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
370<7>[ 0.735059] c0 migrating range 6b281 6b282, retry (0)
371<6>[ 0.758917] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
372<6>[ 0.758953] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
373<7>[ 0.759171] c0 migrating range 6b282 6b283, retry (0)
374<6>[ 0.783080] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
375<6>[ 0.783117] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
376<6>[ 0.783519] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
377<6>[ 0.783691] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
378<6>[ 0.784179] c0 futex hash table entries: 1024 (order: 3, 32768 bytes)
379<4>[ 0.797317] c0 highmem bounce pool size: 64 pages
380<6>[ 0.797724] c0 ashmem: initialized
381<6>[ 0.812154] c0 exFAT: Core Version 1.2.19
382<6>[ 0.812183] c0 exFAT: FS Version 1.2.19
383<6>[ 0.815865] c0 fuse init (API version 7.16)
384<6>[ 0.816841] c0 msgmni has been set to 932
385<6>[ 0.817149] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
386<6>[ 0.817299] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
387<6>[ 0.817438] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
388<6>[ 0.817583] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
389<6>[ 0.817725] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
390<6>[ 0.817858] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
391<6>[ 0.817998] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
392<6>[ 0.818144] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
393<6>[ 0.818403] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
394<6>[ 0.818560] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
395<6>[ 0.818747] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
396<6>[ 0.819392] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
397<6>[ 0.819567] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
398<6>[ 0.819602] c2 FIPS: No test for stdrng (krng)
399<6>[ 0.819656] c0 io scheduler noop registered
400<6>[ 0.819683] c0 io scheduler deadline registered
401<6>[ 0.820108] c0 io scheduler bfq registered
402<6>[ 0.820165] c0 io scheduler row registered
403<6>[ 0.820485] c0 io scheduler cfq registered (default)
404<6>[ 0.820518] c0 io scheduler sio registered
405<6>[ 0.820545] c0 io scheduler zen registered
406<6>[ 0.820602] c0 io scheduler fiops registered
407<6>[ 0.820629] c0 io scheduler tripndroid registered
408<6>[ 0.820862] c0 s3cfb s3cfb.0: vclk=66663000, div=12(11), rate=72727272
409<6>[ 0.820993] c0 set mdnie_pwm sclk rate to 2181818
410<6>[ 0.821024] c0 set mdnie_pwm sclk rate to 12000000
411<6>[ 0.821058] c0 s3cfb s3cfb.0: fimd sclk rate 66666666, clkdiv 0xff1bbb
412<6>[ 0.821481] c0 s3cfb s3cfb.0: [fb2] dma: 0x6a700000, cpu: 0xec899000, size: 0x007d0000
413<6>[ 0.825446] c0 sec_getlog_supply_fbinfo: 0x6a700000 1280 800 32 2
414<6>[ 0.832025] c0 Bootloader sent 'bootloaderfb' : 5EC00000
415<6>[ 0.833251] c0 s3cfb s3cfb.0: parent clock: 66666666, vclk: 66666000, vclk div: 1
416<6>[ 0.833397] c0 s3cfb s3cfb.0: registered successfully
417<6>[ 0.833872] c0 lcd panel: lcd panel driver has been probed.
418<6>[ 0.834600] c0 mdnie mdnie: lcdtype = 2
419<6>[ 0.834636] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI
420<6>[ 0.834677] c0 mdnie mdnie: registered successfully
421<6>[ 0.835217] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
422<6>[ 0.836869] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
423<6>[ 0.837221] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
424<6>[ 0.837553] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
425<6>[ 0.837880] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
426<4>[ 0.839052] c0 Mali: ::Q::exynos_result_of_asv : 0
427<4>[ 0.839086] c0 Mali: mali_dvfs[0].vol = 950000
428<4>[ 0.839116] c0 Mali: mali_dvfs[1].vol = 975000
429<4>[ 0.839145] c0 Mali: mali_runtime_resume.vol = 975000
430<4>[ 0.839177] c0 Mali: mali_dvfs[2].vol = 1050000
431<4>[ 0.839209] c0 Mali: mali_dvfs[3].vol = 1100000
432<4>[ 0.839239] c0 Mali: init_gpu_vol = 1100000
433<4>[ 0.839643] c0 Mali: Mali frequency 440
434<4>[ 0.839669] c0 Mali: init_mali_clock mali_clock c0c941c0
435<4>[ 0.839882] c0 Mali: = regulator_set_voltage: 1100000, 1100000
436<4>[ 0.840259] c0 Mali: Mali frequency 440
437<7>[ 0.840752] c0 migrating range 6b300 6bb00, retry (0)
438<4>[ 0.882330] c0 Mali: Mali device driver loaded
439<4>[ 0.882731] c0 UMP: UMP device driver 0000 loaded
440<6>[ 0.891818] c0 brd: module loaded
441<6>[ 0.896405] c0 loop: module loaded
442<6>[ 0.896454] c0 lkdtm: No crash points registered, enable through debugfs
443<6>[ 0.897223] c0 stmpe811_adc_i2c_probe: stmpe811 adc driver loading
444<6>[ 0.897857] c0 stmpe811_reg_init: ret: 0
445<6>[ 0.897885] c0 stmpe811_reg_init: STMPE811_CHIP_ID(0x811)
446<6>[ 0.898221] c0 stmpe811_reg_init: STMPE811_ID_VER(0x3)
447<6>[ 0.898852] c0 stmpe811_reg_init: STMPE811_SYS_CTRL2(0x6)
448<6>[ 0.899484] c0 stmpe811_reg_init: STMPE811_INT_EN(0x0)
449<6>[ 0.900138] c0 stmpe811_reg_init: STMPE811_ADC_CTRL1(0x3c)
450<6>[ 0.900775] c0 stmpe811_reg_init: STMPE811_ADC_CTRL2(0x3)
451<6>[ 0.901410] c0 stmpe811_reg_init: STMPE811_GPIO_AF(0x0)
452<6>[ 0.902045] c0 stmpe811_reg_init: STMPE811_TSC_CTRL(0x10)
453<6>[ 0.902630] c0 stmpe811 adc(id 0x811) initialized
454<6>[ 0.902907] c0 sec_jack_probe : Registering jack driver
455<6>[ 0.904229] c0 wake enabled for irq 355
456<6>[ 0.904926] c0 print_constraints: WM1811 LDO1: at 3000 mV
457<6>[ 0.905417] c0 print_constraints: WM1811 LDO2: at 1050 mV
458<6>[ 0.921015] c0 wm8994 4-001a: Succeeded to read ID register
459<6>[ 0.923099] c0 wm8994 4-001a: WM1811 revision C CUST_ID 00
460<4>[ 0.926863] c0 wm8994 4-001a: No interrupt specified, no interrupts
461<6>[ 0.929078] c0 PPP generic driver version 2.4.2
462<6>[ 0.929506] c0 PPP Deflate Compression module registered
463<6>[ 0.929544] c0 PPP BSD Compression module registered
464<6>[ 0.930094] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
465<6>[ 0.930210] c3 notifier_call_chain : NOTIFY BAD cryptomgr_notify
466<6>[ 0.930448] c0 PPP MPPE Compression module registered
467<6>[ 0.930482] c0 NET: Registered protocol family 24
468<6>[ 0.930513] c0 tun: Universal TUN/TAP device driver, 1.6
469<6>[ 0.930544] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
470<6>[ 0.931061] c0 host_notifier host_notifier.0: notifier_prove
471<6>[ 0.931841] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
472<7>[ 0.931887] c0 ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
473<6>[ 0.932129] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
474<7>[ 0.932168] c0 ohci_hcd: block sizes: ed 64 td 64
475<6>[ 0.932594] c0 usbcore: registered new interface driver usblp
476<6>[ 0.932629] c0 Initializing USB Mass Storage driver...
477<6>[ 0.932822] c0 usbcore: registered new interface driver usb-storage
478<6>[ 0.932859] c0 USB Mass Storage support registered.
479<6>[ 0.933200] c0 usbcore: registered new interface driver usbserial
480<6>[ 0.933236] c0 usbserial: USB Serial Driver core
481<6>[ 0.933396] c0 USB Serial support registered for pl2303
482<6>[ 0.933582] c0 usbcore: registered new interface driver pl2303
483<6>[ 0.933617] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
484<7>[ 0.933954] c0 migrating range 6b283 6b284, retry (0)
485<6>[ 0.959481] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
486<6>[ 0.959526] c0 s3c-udc : version 15 March 2009
487<7>[ 0.959557] c0 init
488<7>[ 0.960304] c0 usb: android_bind disconnect
489<7>[ 0.960332] c0 usb: usb_gadget_disconnect
490<7>[ 0.962721] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=1
491<6>[ 0.962971] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
492<6>[ 0.963013] c0 android_usb gadget: Number of LUNs=4
493<6>[ 0.963046] c0 lun0: LUN: removable file: (no medium)
494<6>[ 0.963078] c0 lun1: LUN: removable file: (no medium)
495<6>[ 0.963110] c0 lun2: LUN: removable file: (no medium)
496<6>[ 0.963143] c0 lun3: LUN: removable file: (no medium)
497<7>[ 0.964406] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=2
498<7>[ 0.964447] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=3
499<7>[ 0.964490] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=4
500<7>[ 0.964527] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
501<7>[ 0.964561] c0 usb: composite_bind bcdDevice=0x0
502<7>[ 0.964589] c0 usb: composite_bind composite_manufacturer=
503<6>[ 0.964627] c0 android_usb gadget: android_usb ready
504<6>[ 0.964656] c0 usb: Skip udc_enable
505<6>[ 0.965133] c0 mousedev: PS/2 mouse device common for all mice
506<6>[ 0.965922] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
507<7>[ 0.966207] c0 [keys]PWR 0
508<6>[ 0.966971] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-004a/input/input1
509<3>[ 1.020047] c0 mxt_power_on is finished
510<6>[ 1.330443] c0 Atmel MXT1664S 3-004a: family: 0xa2 variant: 0x0 version: 0x10 build: 0xaa matrix X,Y size: 32,52 number of obect: 24
511<6>[ 1.334993] c0 Atmel MXT1664S 3-004a: maXTouch: 24 Objects
512<6>[ 1.335030] c0 Atmel MXT1664S 3-004a: maXTouch: 56 report ID
513<6>[ 1.670318] c0 s5p_gpioint_set_type irq:387 is at GPM2(3)
514<6>[ 1.670797] c0 Atmel MXT1664S 3-004a: Mxt touch success initialization
515<6>[ 1.670860] c2 Atmel MXT1664S 3-004a: calibration is on going !!
516<6>[ 1.671142] c2 Atmel MXT1664S 3-004a: reset is ongoing
517<6>[ 1.672430] c2 Atmel MXT1664S 3-004a: normal mode
518<6>[ 1.673200] c0 max77686_rtc_probe
519<6>[ 1.700218] c0 max77686-rtc max77686-rtc: max77686_rtc_init_reg: bypass init
520<6>[ 1.730398] c0 max77686_rtc_read_time: 112/0/1 13:58:8(0)
521<6>[ 1.760385] c0 max77686_rtc_read_alarm: 100/0/1 0:0:0(0)
522<6>[ 1.761120] c0 using rtc device, max77686-rtc, for alarms
523<6>[ 1.761179] c0 max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
524<6>[ 1.761227] c0 max77686_irq_unmask: group=2, cur=0xfd
525<4>[ 1.761869] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
526<6>[ 1.762021] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling
527<4>[ 1.762096] c0 s3c-rtc exynos-rtc: warning: invalid RTC value so initializing it
528<6>[ 1.762435] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
529<6>[ 1.762677] c0 i2c /dev entries driver
530<6>[ 1.766537] c0 Linux media interface: v0.10
531<6>[ 1.767052] c0 lirc_dev: IR Remote Control driver registered, major 247
532<6>[ 1.767091] c0 IR NEC protocol handler initialized
533<6>[ 1.767120] c0 IR RC5(x) protocol handler initialized
534<6>[ 1.767149] c0 IR RC6 protocol handler initialized
535<6>[ 1.767176] c0 IR JVC protocol handler initialized
536<6>[ 1.767204] c0 IR Sony protocol handler initialized
537<6>[ 1.767236] c0 IR RC5 (streamzap) protocol handler initialized
538<6>[ 1.767269] c0 IR LIRC bridge handler initialized
539<6>[ 1.767296] c0 Linux video capture interface: v2.00
540<6>[ 1.767463] c0 v4l2_i2c_drv_init: ISX012 called
541<6>[ 1.768186] c0 [INFO]flite_probe:2121: FIMC-LITE0 probe success
542<6>[ 1.768254] c0 [INFO]flite_probe:2121: FIMC-LITE1 probe success
543<6>[ 1.768588] c0 fimc_is_init_mem_mgr : [cma_info] start_addr : 0x68000000, end_addr : 0x68c00000, total_size : 0xc00000, free_size : 0xc00000
544<6>[ 1.768716] c0 ctrl->mem.base = 0x68000000
545<6>[ 1.768742] c0 ctrl->mem.size = 0xc00000
546<6>[ 1.768767] c0 ctrl->mem.fw_ref_base = 0x68a01000
547<6>[ 1.768798] c0 ctrl->mem.setfile_ref_base = 0x68b81000
548<6>[ 1.769296] c0 FIMC-IS probe completed
549<6>[ 1.769585] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
550<6>[ 1.769662] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
551<2>[ 1.769880] c0 Initialize JPEG driver
552<6>[ 1.770324] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
553<6>[ 1.770592] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
554<4>[ 1.770893] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
555<6>[ 1.771223] c0 s5p_int_src_ext_hpd()
556<6>[ 1.771252] c0 s5p_hpd_read_gpio(0)
557<6>[ 1.771461] c0 s5p_hpd_read_gpio(0)
558<6>[ 1.772135] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
559<4>[ 1.772319] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
560<4>[ 1.772357] c0 i2c-core: driver [s5p_ddc] using legacy resume method
561<6>[ 1.772622] c0 mfc_init_mem_mgr[581] cma 0x5c200000 0x5f000000 0x2e00000 0x2e00000 1
562<6>[ 1.773128] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
563<6>[ 1.773825] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
564<6>[ 1.774260] c0 sii9234_cfg_gpio()
565<6>[ 1.774305] c0 Registered interrupt support for gpio group 10.
566<6>[ 1.774344] c0 s5p_gpioint_set_type irq:413 is at GPF3(5)
567<6>[ 1.774382] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
568<6>[ 1.774620] c0 s5p_gpioint_set_type irq:413 is at GPF3(5)
569<6>[ 1.774745] c0 sii9234 : create mhl sysfile
570<6>[ 1.775393] c0 input: sii9234_rcp as /devices/virtual/input/input2
571<6>[ 1.776444] c0 smb347_i2c_probe : smb347 Charger Driver Loading
572<6>[ 1.776480] c0 register callback functions!
573<6>[ 1.776506] c0 smb347 charger initialized.
574<6>[ 1.777365] c0 device-mapper: uevent: version 1.0.3
575<6>[ 1.777951] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
576<6>[ 1.778982] c0 cpuidle: using governor ladder
577<6>[ 1.780329] c0 cpuidle: using governor menu
578<6>[ 1.780496] c0 mshci: Mobile Storage Host Controller Interface driver
579<6>[ 1.780538] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
580<6>[ 1.780731] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (40000000 Hz)
581<3>[ 1.780912] c0 mmc0: Version ID 0x5342240a.
582<6>[ 1.781064] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
583<6>[ 1.781973] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
584<6>[ 1.782311] c0 sdhci: Secure Digital Host Controller Interface driver
585<6>[ 1.782352] c0 sdhci: Copyright(c) Pierre Ossman
586<6>[ 1.782498] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
587<6>[ 1.782787] c0 mmc1: vtf_2.8v regulator found
588<7>[ 1.783000] c0 Registered led device: mmc1::
589<6>[ 1.783825] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
590<6>[ 1.783879] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
591<6>[ 1.784108] c0 wake enabled for irq 380
592<6>[ 1.784134] c0 mmc1: card removed.
593<6>[ 1.784264] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
594<3>[ 1.784352] c0 mmc2: no vmmc regulator found
595<7>[ 1.784573] c0 Registered led device: mmc2::
596<6>[ 1.784825] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
597<6>[ 1.793549] c0 usbcore: registered new interface driver usbhid
598<6>[ 1.793586] c0 usbhid: USB HID core driver
599<3>[ 1.820846] c0 mmc0: cmd 52 response timeout error
600<3>[ 1.821698] c0 mmc0: cmd 52 response timeout error
601<4>[ 1.823739] c0 i2c-core: driver [isa1200_vibrator] using legacy suspend method
602<4>[ 1.823784] c0 i2c-core: driver [isa1200_vibrator] using legacy resume method
603<6>[ 1.823878] c0 lsm330dlc_accel_probe: is started
604<3>[ 1.824243] c0 mmc0: cmd 8 response timeout error
605<3>[ 1.825097] c0 mmc0: cmd 5 response timeout error
606<6>[ 1.825486] c0 Registered sensors device: accelerometer_sensor
607<6>[ 1.825542] c0 lsm330dlc_accel_probe: successful, position = 4
608<6>[ 1.825780] c0 lsm330dlc_gyro_probe, started
609<3>[ 1.825929] c0 mmc0: cmd 5 response timeout error
610<6>[ 1.826275] c0 input: gyro_sensor as /devices/virtual/input/input3
611<3>[ 1.826765] c0 mmc0: cmd 5 response timeout error
612<6>[ 1.826816] c0 Registered sensors device: gyro_sensor
613<6>[ 1.826869] c0 lsm330dlc_gyro_probe, position = 4
614<6>[ 1.826903] c0 lsm330dlc_gyro_probe, successful
615<6>[ 1.827128] c0 akm8975_probe is called.
616<6>[ 1.827309] c0 s5p_gpioint_set_type irq:407 is at GPM4(7)
617<3>[ 1.827602] c0 mmc0: cmd 5 response timeout error
618<6>[ 1.828093] c0 akm8975_probe: asa_x = 172, asa_y = 171, asa_z = 183
619<6>[ 1.828437] c0 Registered sensors device: magnetic_sensor
620<3>[ 1.828474] c0 mmc0: cmd 55 response timeout error
621<6>[ 1.828541] c0 akm8975_probe is successful.
622<6>[ 1.828758] c0 bh1721fvc_probe: is started!
623<3>[ 1.829320] c0 mmc0: cmd 55 response timeout error
624<3>[ 1.829983] c0 bh1721fvc_probe: No search bh1721fvc lightsensor!
625<4>[ 1.830052] c0 bh1721fvc: probe of 9-0023 failed with error -5
626<3>[ 1.830167] c0 mmc0: cmd 55 response timeout error
627<6>[ 1.830288] c0 al3201_probe: start
628<3>[ 1.831016] c0 mmc0: cmd 55 response timeout error
629<6>[ 1.833720] c0 input: light_sensor as /devices/virtual/input/input4
630<6>[ 1.834169] c0 Registered sensors device: light_sensor
631<6>[ 1.834217] c0 al3201_probe: success!
632<6>[ 1.834794] c0 input: sec_keyboard as /devices/platform/sec_keyboard/input/input5
633<6>[ 1.835611] c0 ir_remocon_probe start!
634<6>[ 1.851770] c0 mmc0: VTU00M: 15010056545530304dfc3d39868641fb
635<4>[ 1.890199] c0 ------------[ cut here ]------------
636<4>[ 1.890245] c0 WARNING: at ../../../../../../kernel/samsung/html6405/drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x6c/0x15c()
637<4>[ 1.890306] c0 autorequest GPIO-116
638<4>[ 1.890328] c0 Modules linked in:
639<4>[ 1.890351] c0 Backtrace:
640<4>[ 1.890392] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
641<4>[ 1.890442] c0 r7:c0398ee0 r6:00000009 r5:e902bd60 r4:c08387ac
642<4>[ 1.890500] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c00a391c>] (warn_slowpath_common+0x80/0x90)
643<4>[ 1.890556] c0 [<c00a389c>] (warn_slowpath_common+0x0/0x90) from [<c00a3964>] (warn_slowpath_fmt+0x38/0x40)
644<4>[ 1.890607] c0 r9:c0d719fc r8:00000003 r7:00000074 r6:c0d53f90 r5:c0cc8050
645<4>[ 1.890657] c0 r4:c0d53f94
646<4>[ 1.890686] c0 [<c00a392c>] (warn_slowpath_fmt+0x0/0x40) from [<c0398ee0>] (gpio_ensure_requested+0x6c/0x15c)
647<4>[ 1.890741] c0 r3:00000074 r2:c0a33138
648<4>[ 1.890778] c0 [<c0398e74>] (gpio_ensure_requested+0x0/0x15c) from [<c03991d0>] (gpio_direction_output+0xac/0x15c)
649<4>[ 1.890832] c0 r9:c0d719fc r8:00000001 r7:20000013 r6:c0cc8050 r5:00000003
650<4>[ 1.890881] c0 r4:c0d53a20
651<4>[ 1.890913] c0 [<c0399124>] (gpio_direction_output+0x0/0x15c) from [<c0073c28>] (irda_wake_en+0x24/0x48)
652<4>[ 1.890977] c0 [<c0073c04>] (irda_wake_en+0x0/0x48) from [<c083193c>] (ir_remocon_probe+0x1c0/0x854)
653<4>[ 1.891026] c0 r4:e51fa000 r3:c0073c04
654<4>[ 1.891065] c0 [<c083177c>] (ir_remocon_probe+0x0/0x854) from [<c0538778>] (i2c_device_probe+0xb4/0x10c)
655<4>[ 1.891125] c0 [<c05386c4>] (i2c_device_probe+0x0/0x10c) from [<c0402fd8>] (driver_probe_device+0xa0/0x1ec)
656<4>[ 1.891177] c0 r9:00000000 r8:00000000 r7:c0ceb108 r6:c0ceb108 r5:c0d56eb8
657<4>[ 1.891229] c0 r4:e96d4420
658<4>[ 1.891258] c0 [<c0402f38>] (driver_probe_device+0x0/0x1ec) from [<c0403218>] (__driver_attach+0xa8/0xac)
659<4>[ 1.891308] c0 r8:00000000 r7:e96d4454 r6:c0ceb108 r5:c08432b8 r4:e96d4420
660<4>[ 1.891358] c0 r3:00000000
661<4>[ 1.891386] c0 [<c0403170>] (__driver_attach+0x0/0xac) from [<c04016bc>] (bus_for_each_dev+0x78/0xb4)
662<4>[ 1.891436] c0 r7:c0403170 r6:c0ceb108 r5:c08258e4 r4:00000000
663<4>[ 1.891490] c0 [<c0401644>] (bus_for_each_dev+0x0/0xb4) from [<c0402be4>] (driver_attach+0x2c/0x30)
664<4>[ 1.891538] c0 r7:e97b6060 r6:c0cd8528 r5:c0ceb108 r4:c0ceb108
665<4>[ 1.891590] c0 [<c0402bb8>] (driver_attach+0x0/0x30) from [<c04026d8>] (bus_add_driver+0xec/0x2fc)
666<4>[ 1.891644] c0 [<c04025ec>] (bus_add_driver+0x0/0x2fc) from [<c0403a58>] (driver_register+0xa0/0x1b4)
667<4>[ 1.891702] c0 [<c04039b8>] (driver_register+0x0/0x1b4) from [<c053aedc>] (i2c_register_driver+0x40/0xe0)
668<4>[ 1.891757] c0 r9:00000000 r8:00000000 r7:e902a000 r6:c0d2c2e0 r5:c0049d50
669<4>[ 1.891806] c0 r4:c0ceb0e0
670<4>[ 1.891836] c0 [<c053ae9c>] (i2c_register_driver+0x0/0xe0) from [<c0035f78>] (ir_remocon_init+0x20/0x28)
671<4>[ 1.891886] c0 r4:c00499e4 r3:c053ae9c
672<4>[ 1.891925] c0 [<c0035f58>] (ir_remocon_init+0x0/0x28) from [<c0052ac4>] (do_one_initcall+0x154/0x1c4)
673<4>[ 1.891984] c0 [<c0052970>] (do_one_initcall+0x0/0x1c4) from [<c0008f34>] (kernel_init+0x1bc/0x27c)
674<4>[ 1.892044] c0 [<c0008d78>] (kernel_init+0x0/0x27c) from [<c00a841c>] (do_exit+0x0/0x984)
675<4>[ 1.892088] c0 r7:00000013 r6:c00a841c r5:c0008d78 r4:00000000
676<4>[ 1.892142] c0 ---[ end trace 7bd8d9362a5c8563 ]---
677<3>[ 1.892206] c0 irda_wake_en: irda_wake_en : 1
678<6>[ 1.944057] c0 mmc0 : 10 : 0c : 20130128 : 20141021.
679<6>[ 1.944095] c0 mmc0 : disable PON feature : 10 : 0c : 20130128
680<4>[ 1.947375] c0 mmc0: Voltage range not supported for power class.
681<3>[ 1.947412] c0 mmc0: power class selection to bus width 8 failed
682<4>[ 1.947598] c0 mmc0: Voltage range not supported for power class.
683<3>[ 1.947636] c0 mmc0: power class selection to bus width 8 ddr 2 failed
684<6>[ 1.947847] c0 mmc0: new high speed DDR MMC card at address 0001
685<6>[ 1.948384] c0 mmcblk0: mmc0:0001 VTU00M 14.6 GiB
686<4>[ 1.949235] c0 ------------[ cut here ]------------
687<4>[ 1.949283] c0 WARNING: at ../../../../../../kernel/samsung/html6405/block/blk.h:225 get_task_io_context+0xf8/0x104()
688<4>[ 1.949337] c0 Modules linked in:
689<4>[ 1.949361] c0 Backtrace:
690<4>[ 1.949398] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
691<4>[ 1.949444] c0 r7:c035fddc r6:00000009 r5:00000000 r4:c08387ac
692<4>[ 1.949500] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c00a391c>] (warn_slowpath_common+0x80/0x90)
693<4>[ 1.949560] c0 [<c00a389c>] (warn_slowpath_common+0x0/0x90) from [<c00a39d0>] (warn_slowpath_null+0x24/0x2c)
694<4>[ 1.949612] c0 r9:00000000 r8:c0d52b94 r7:e90d3a00 r6:c0844b24 r5:c0844340
695<4>[ 1.949661] c0 r4:e90d3e14
696<4>[ 1.949691] c0 [<c00a39ac>] (warn_slowpath_null+0x0/0x2c) from [<c035fddc>] (get_task_io_context+0xf8/0x104)
697<4>[ 1.949756] c0 [<c035fce4>] (get_task_io_context+0x0/0x104) from [<c05e1380>] (mmc_request+0x40/0xf0)
698<4>[ 1.949820] c0 [<c05e1340>] (mmc_request+0x0/0xf0) from [<c0359fc4>] (__blk_run_queue+0x60/0x7c)
699<4>[ 1.949867] c0 r6:c1f90c00 r5:e97b9b48 r4:e97ba000 r3:c05e1340
700<4>[ 1.949924] c0 [<c0359f64>] (__blk_run_queue+0x0/0x7c) from [<c0372cb4>] (cfq_kick_queue+0x34/0x48)
701<4>[ 1.949972] c0 r4:e97ba000 r3:c0359f64
702<4>[ 1.950014] c0 [<c0372c80>] (cfq_kick_queue+0x0/0x48) from [<c00bf808>] (process_one_work+0x150/0x478)
703<4>[ 1.950067] c0 r5:e90d21c0 r4:e97b9b48
704<4>[ 1.950103] c0 [<c00bf6b8>] (process_one_work+0x0/0x478) from [<c00bff28>] (worker_thread+0x178/0x410)
705<4>[ 1.950160] c0 [<c00bfdb0>] (worker_thread+0x0/0x410) from [<c00c4b34>] (kthread+0xcc/0xd0)
706<4>[ 1.950214] c0 [<c00c4a68>] (kthread+0x0/0xd0) from [<c00a841c>] (do_exit+0x0/0x984)
707<4>[ 1.950256] c0 r8:00000000 r7:00000013 r6:c00a841c r5:c00c4a68 r4:e9031e7c
708<4>[ 1.950310] c0 ---[ end trace 7bd8d9362a5c8564 ]---
709<6>[ 1.953818] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
710<6>[ 1.992200] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
711<6>[ 2.000515] c0 2. irda_fw_update: chip : 0202, bin : 0200, need update!
712<3>[ 2.000839] c0 irda_wake_en: irda_wake_en : 0
713<6>[ 2.140505] c0 irda_fw_update: boot mode, FW download start! ret=01fe
714<6>[ 5.290517] c0 1. irda_fw_update: boot down complete
715<3>[ 5.320510] c0 irda_wake_en: irda_wake_en : 1
716<6>[ 5.390559] c0 7. irda_fw_update: user mode : Upgrade FW_version : 0200
717<3>[ 5.390599] c0 irda_wake_en: irda_wake_en : 0
718<6>[ 5.501067] c0 usbcore: registered new interface driver snd-usb-audio
719<6>[ 5.502819] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
720<6>[ 5.502962] c0 audss_init: RCLK SRC[busclk]
721<6>[ 5.503072] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
722<6>[ 5.503776] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
723<6>[ 5.503821] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
724<7>[ 5.503860] c0 i2s_txctrl: Turn Off - spr is no active
725<6>[ 5.503906] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
726<6>[ 5.503942] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
727<6>[ 5.551134] c0 wm8994-codec wm8994-codec: write 60 = 100
728<4>[ 5.551351] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
729<4>[ 5.551398] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
730<6>[ 5.551902] c0 wm8994-codec wm8994-codec: write 15 = 40
731<6>[ 5.552116] c0 wm8994-codec wm8994-codec: write 102 = 3
732<6>[ 5.552330] c0 wm8994-codec wm8994-codec: write 56 = c07
733<6>[ 5.552542] c0 wm8994-codec wm8994-codec: write 5d = 7e
734<6>[ 5.552754] c0 wm8994-codec wm8994-codec: write 5e = 0
735<6>[ 5.552964] c0 wm8994-codec wm8994-codec: write 102 = 0
736<6>[ 5.553176] c0 wm8994-codec wm8994-codec: write 38 = 30
737<6>[ 5.553392] c0 wm8994-codec wm8994-codec: write 402 = 1c0
738<6>[ 5.553606] c0 wm8994-codec wm8994-codec: write 403 = 1c0
739<6>[ 5.553819] c0 wm8994-codec wm8994-codec: write 406 = 1c0
740<6>[ 5.554031] c0 wm8994-codec wm8994-codec: write 407 = 1c0
741<6>[ 5.554244] c0 wm8994-codec wm8994-codec: write 502 = 1c0
742<6>[ 5.554456] c0 wm8994-codec wm8994-codec: write 503 = 1c0
743<6>[ 5.554671] c0 wm8994-codec wm8994-codec: write 400 = 1c0
744<6>[ 5.554883] c0 wm8994-codec wm8994-codec: write 401 = 1c0
745<6>[ 5.555095] c0 wm8994-codec wm8994-codec: write 404 = 1c0
746<6>[ 5.555307] c0 wm8994-codec wm8994-codec: write 405 = 1c0
747<6>[ 5.555519] c0 wm8994-codec wm8994-codec: write 500 = 1c0
748<6>[ 5.555731] c0 wm8994-codec wm8994-codec: write 501 = 1c0
749<6>[ 5.555944] c0 wm8994-codec wm8994-codec: write 610 = 3c0
750<6>[ 5.556155] c0 wm8994-codec wm8994-codec: write 611 = 3c0
751<6>[ 5.556368] c0 wm8994-codec wm8994-codec: write 612 = 3c0
752<6>[ 5.556584] c0 wm8994-codec wm8994-codec: write 613 = 3c0
753<6>[ 5.556796] c0 wm8994-codec wm8994-codec: write 421 = 210
754<6>[ 5.557009] c0 wm8994-codec wm8994-codec: write 423 = 210
755<6>[ 5.557221] c0 wm8994-codec wm8994-codec: write 521 = 210
756<6>[ 5.557439] c0 wm8994-codec wm8994-codec: write 34 = 10
757<6>[ 5.557653] c0 wm8994-codec wm8994-codec: write 35 = 10
758<6>[ 5.557867] c0 wm8994-codec wm8994-codec: write 38 = b0
759<6>[ 5.558079] c0 wm8994-codec wm8994-codec: write 37 = 80
760<6>[ 5.558304] c0 wm8994-codec wm8994-codec: write 440 = 9b
761<6>[ 5.558517] c0 wm8994-codec wm8994-codec: write 441 = 844
762<6>[ 5.558730] c0 wm8994-codec wm8994-codec: write 442 = e8
763<6>[ 5.558943] c0 wm8994-codec wm8994-codec: write 443 = 210
764<6>[ 5.559160] c0 wm8994-codec wm8994-codec: write 440 = 98
765<6>[ 5.559374] c0 wm8994-codec wm8994-codec: write 450 = 9b
766<6>[ 5.559586] c0 wm8994-codec wm8994-codec: write 451 = 844
767<6>[ 5.559799] c0 wm8994-codec wm8994-codec: write 452 = e8
768<6>[ 5.560030] c0 wm8994-codec wm8994-codec: write 453 = 210
769<6>[ 5.560246] c0 wm8994-codec wm8994-codec: write 450 = 98
770<6>[ 5.560462] c0 wm8994-codec wm8994-codec: write 540 = 9b
771<6>[ 5.560674] c0 wm8994-codec wm8994-codec: write 541 = 844
772<6>[ 5.560888] c0 wm8994-codec wm8994-codec: write 542 = e8
773<6>[ 5.561101] c0 wm8994-codec wm8994-codec: write 543 = 210
774<6>[ 5.561316] c0 wm8994-codec wm8994-codec: write 540 = 98
775<6>[ 5.561569] c0 wm8994-codec wm8994-codec: write 3d = 2f
776<6>[ 5.561782] c0 wm8994-codec wm8994-codec: write 3e = 27
777<6>[ 5.561995] c0 wm8994-codec wm8994-codec: write 18 = 18b
778<6>[ 5.562207] c0 wm8994-codec wm8994-codec: write 1a = 18b
779<6>[ 5.562418] c0 wm8994-codec wm8994-codec: write 19 = 18b
780<6>[ 5.562630] c0 wm8994-codec wm8994-codec: write 1b = 18b
781<6>[ 5.562842] c0 wm8994-codec wm8994-codec: write 26 = 179
782<6>[ 5.563058] c0 wm8994-codec wm8994-codec: write 27 = 179
783<6>[ 5.563271] c0 wm8994-codec wm8994-codec: write 1c = 1ed
784<6>[ 5.563484] c0 wm8994-codec wm8994-codec: write 1d = 1ed
785<6>[ 5.563696] c0 wm8994-codec wm8994-codec: write 20 = 1f9
786<6>[ 5.563908] c0 wm8994-codec wm8994-codec: write 21 = 1f9
787<6>[ 5.566255] c0 Sound: enabled mclk
788<7>[ 5.566282] c0 pmu_debug: 0x00000900
789<6>[ 5.571309] c0 Sound: state: 1, use_cnt: 1
790<6>[ 5.571615] c0 wm8994-codec wm8994-codec: write 200 = 8
791<6>[ 5.571837] c0 wm8994-codec wm8994-codec: write d0 = 1400
792<6>[ 5.572052] c0 wm8994-codec wm8994-codec: write 210 = 81
793<6>[ 5.572266] c0 wm8994-codec wm8994-codec: write 211 = 81
794<6>[ 5.572499] c0 wm8994-codec wm8994-codec: write d0 = 0
795<6>[ 5.576556] c0 wm8994-codec wm8994-codec: write 2 = 2000
796<6>[ 5.576781] c0 wm8994-codec wm8994-codec: write 4 = 300
797<6>[ 5.576997] c0 wm8994-codec wm8994-codec: write 5 = 300
798<6>[ 5.577211] c0 wm8994-codec wm8994-codec: write 208 = a
799<6>[ 5.577425] c0 wm8994-codec wm8994-codec: write 200 = 9
800<6>[ 5.577738] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
801<6>[ 5.578012] c0 wm8994-codec wm8994-codec: write 702 = 8101
802<6>[ 5.578453] c0 wm8994-codec wm8994-codec: write 703 = 8101
803<6>[ 5.578895] c0 wm8994-codec wm8994-codec: write 704 = 8101
804<6>[ 5.580382] c0 asoc: wm8994-aif2 <-> midas.cp mapping ok
805<6>[ 5.581645] c0 asoc: wm8994-aif3 <-> midas.bt mapping ok
806<6>[ 5.581739] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
807<6>[ 5.581782] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
808<7>[ 5.581821] c0 i2s_txctrl: Turn Off - spr is no active
809<6>[ 5.581875] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
810<6>[ 5.581917] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
811<7>[ 5.583381] c0 migrating range 6b2a0 6b2c0, retry (0)
812<7>[ 5.609299] c0 migrating range 6b2c0 6b2e0, retry (0)
813<6>[ 5.635136] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
814<6>[ 5.637850] c0 Samsung SRP driver, (c)2011 Samsung Electronics
815<6>[ 5.639058] c0 ALSA device list:
816<6>[ 5.639083] c0 #0: Midas_WM1811
817<6>[ 5.639254] c0 GACT probability NOT on
818<6>[ 5.639288] c0 Mirror/redirect action on
819<6>[ 5.639317] c0 u32 classifier
820<6>[ 5.639337] c0 Actions configured
821<6>[ 5.639362] c0 Netfilter messages via NETLINK v0.30.
822<6>[ 5.639436] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
823<6>[ 5.640800] c0 ctnetlink v0.93: registering with nfnetlink.
824<6>[ 5.640869] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
825<6>[ 5.640909] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
826<6>[ 5.641455] c0 xt_time: kernel timezone is -0000
827<6>[ 5.643439] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
828<6>[ 5.643628] c0 arp_tables: (C) 2002 David S. Miller
829<6>[ 5.643698] c0 TCP cubic registered
830<6>[ 5.643723] c0 Initializing XFRM netlink socket
831<6>[ 5.644850] c0 NET: Registered protocol family 10
832<6>[ 5.647966] c0 Mobile IPv6
833<6>[ 5.648016] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
834<6>[ 5.648361] c0 IPv6 over IPv4 tunneling driver
835<6>[ 5.654157] c0 NET: Registered protocol family 17
836<6>[ 5.654227] c0 NET: Registered protocol family 15
837<6>[ 5.654389] c0 Bluetooth: RFCOMM TTY layer initialized
838<6>[ 5.654434] c0 Bluetooth: RFCOMM socket layer initialized
839<6>[ 5.654469] c0 Bluetooth: RFCOMM ver 1.11
840<6>[ 5.654499] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
841<6>[ 5.654538] c0 Bluetooth: BNEP filters: protocol multicast
842<6>[ 5.654573] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
843<6>[ 5.654886] c0 NET: Registered protocol family 35
844<5>[ 5.655069] c0 Registering the dns_resolver key type
845<6>[ 5.655122] c0 EXYNOS4X12: Adaptive Support Voltage init
846<6>[ 5.655158] c0 EXYNOS4X12(SG): ORIG : 2 MOD : 0 RESULT : 2
847<4>[ 5.655191] c0 ABB-Control: abb_control_init
848<4>[ 5.655400] c0 ABB-Control; int: 100100 KHz 1000 mV
849<4>[ 5.655439] c0 ABB-Control; int: 267160 KHz 1000 mV
850<4>[ 5.655477] c0 ABB-Control; int: 400266 KHz 1000 mV
851<4>[ 5.655515] c0 ABB-Control; mif: 100100 KHz 1000 mV
852<4>[ 5.655550] c0 ABB-Control; mif: 267160 KHz 1000 mV
853<4>[ 5.655588] c0 ABB-Control; mif: 400266 KHz 1000 mV
854<4>[ 5.655631] c0 ABB-Control; g3d: 54000 KHz 1050 mV
855<4>[ 5.655664] c0 ABB-Control; g3d: 300000 KHz 1300 mV
856<4>[ 5.655697] c0 ABB-Control; g3d: 533000 KHz 1300 mV
857<4>[ 5.655734] c0 ABB-Control; g3d: 9999999 KHz 1300 mV
858<4>[ 5.655775] c0 ABB-Control; arm: 100000 KHz 1000 mV
859<4>[ 5.655811] c0 ABB-Control; arm: 800000 KHz 1000 mV
860<4>[ 5.655845] c0 ABB-Control; arm: 1600000 KHz 1000 mV
861<4>[ 5.655883] c0 ABB-Control; arm: 9999999 KHz 1000 mV
862<6>[ 5.655926] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
863<5>[ 5.655993] c0 Registering SWP/SWPB emulation handler
864<5>[ 5.656028] c0 Registering SDIV/UDIV emulation handler
865<6>[ 5.656133] c0 DVFS : VDD_ARM Voltage table set with 2 Group
866<6>[ 5.656929] c0 DVFS : VDD_INT Voltage table set with 2 Group
867<7>[ 5.657658] c0 mif: set_hsic_lpa_states: 300: called(s5p_usb_phy_init+0x160/0x364):
868<6>[ 5.657709] c0 s5p-ehci s5p-ehci: usb phy usage(2)
869<7>[ 5.657823] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1
870<7>[ 5.657871] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
871<7>[ 5.657912] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
872<7>[ 5.657957] c0 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
873<7>[ 5.658014] c0 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
874<6>[ 5.658063] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
875<7>[ 5.658146] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file 'devices'
876<7>[ 5.658216] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
877<6>[ 5.658603] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
878<7>[ 5.658822] c0 migrating range 6b284 6b285, retry (0)
879<7>[ 5.684239] c0 migrating range 6b285 6b286, retry (0)
880<7>[ 5.709280] c0 migrating range 6b286 6b287, retry (0)
881<7>[ 5.734423] c0 s5p-ehci s5p-ehci: park 0
882<7>[ 5.734457] c0 s5p-ehci s5p-ehci: support lpm
883<6>[ 5.734514] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
884<7>[ 5.734559] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
885<7>[ 5.734617] c0 s5p-ehci s5p-ehci: init command 0010005 (park)=0 ithresh=1 period=512 RUN
886<6>[ 5.750082] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
887<7>[ 5.750244] c0 usb usb1: default language 0x0409
888<7>[ 5.750297] c0 usb usb1: udev 1, busnum 1, minor = 0
889<6>[ 5.750334] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
890<6>[ 5.750383] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
891<6>[ 5.750426] c0 usb usb1: Product: S5P EHCI Host Controller
892<6>[ 5.750460] c0 usb usb1: Manufacturer: Linux 3.0.101-HTML6405-N8000 ehci_hcd
893<6>[ 5.750506] c0 usb usb1: SerialNumber: s5p-ehci
894<7>[ 5.751113] c0 usb usb1: usb_probe_device
895<7>[ 5.751145] c0 usb usb1: configuration #1 chosen from 1 choice
896<7>[ 5.751205] c0 usb usb1: adding 1-0:1.0 (config #1, interface 0)
897<7>[ 5.751457] c0 hub 1-0:1.0: usb_probe_interface
898<7>[ 5.751490] c0 hub 1-0:1.0: usb_probe_interface - got id
899<6>[ 5.751525] c0 hub 1-0:1.0: USB hub found
900<6>[ 5.751562] c0 hub 1-0:1.0: 3 ports detected
901<7>[ 5.751594] c0 hub 1-0:1.0: standalone hub
902<7>[ 5.751624] c0 hub 1-0:1.0: individual port power switching
903<7>[ 5.751659] c0 hub 1-0:1.0: individual port over-current protection
904<7>[ 5.751696] c0 hub 1-0:1.0: power on to power good time: 20ms
905<7>[ 5.751744] c0 hub 1-0:1.0: local power source is good
906<7>[ 5.751781] c0 hub 1-0:1.0: enabling power on all ports
907<7>[ 5.752106] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
908<6>[ 5.752257] c0 CP not ready, Active State low
909<6>[ 5.752671] c0 s5p-ohci s5p-ohci: usb phy usage(6)
910<3>[ 5.752707] c0 s5p-ohci s5p-ohci: Already power on PHY
911<7>[ 5.752740] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
912<7>[ 5.752785] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
913<6>[ 5.752828] c0 s5p-ohci s5p-ohci: s5p OHCI
914<7>[ 5.752873] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '002'
915<6>[ 5.753232] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
916<7>[ 5.753291] c0 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e51d1508
917<7>[ 5.753459] c0 migrating range 6b287 6b288, retry (0)
918<7>[ 5.778542] c0 s5p-ohci s5p-ohci: created debug files
919<6>[ 5.778601] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
920<7>[ 5.778640] c0 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e51d1508
921<7>[ 5.832059] c0 s5p-ohci s5p-ohci: OHCI controller state
922<7>[ 5.832096] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
923<7>[ 5.832144] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
924<7>[ 5.832191] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
925<7>[ 5.832228] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
926<7>[ 5.832263] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
927<7>[ 5.832312] c0 s5p-ohci s5p-ohci: hcca frame #0003
928<7>[ 5.832350] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
929<7>[ 5.832395] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
930<7>[ 5.832436] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
931<7>[ 5.832479] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
932<7>[ 5.832523] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
933<7>[ 5.832563] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
934<7>[ 5.832642] c0 usb usb2: default language 0x0409
935<7>[ 5.832694] c0 usb usb2: udev 1, busnum 2, minor = 128
936<6>[ 5.832726] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
937<6>[ 5.832767] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
938<6>[ 5.832809] c0 usb usb2: Product: s5p OHCI
939<6>[ 5.832835] c0 usb usb2: Manufacturer: Linux 3.0.101-HTML6405-N8000 ohci_hcd
940<6>[ 5.832875] c0 usb usb2: SerialNumber: s5p-ohci
941<7>[ 5.833458] c0 usb usb2: usb_probe_device
942<7>[ 5.833488] c0 usb usb2: configuration #1 chosen from 1 choice
943<7>[ 5.833545] c0 usb usb2: adding 2-0:1.0 (config #1, interface 0)
944<7>[ 5.833818] c0 hub 2-0:1.0: usb_probe_interface
945<7>[ 5.833849] c0 hub 2-0:1.0: usb_probe_interface - got id
946<6>[ 5.833884] c0 hub 2-0:1.0: USB hub found
947<6>[ 5.833922] c0 hub 2-0:1.0: 3 ports detected
948<7>[ 5.833951] c0 hub 2-0:1.0: standalone hub
949<7>[ 5.833978] c0 hub 2-0:1.0: no power switching (usb 1.0)
950<7>[ 5.834009] c0 hub 2-0:1.0: global over-current protection
951<7>[ 5.834041] c0 hub 2-0:1.0: power on to power good time: 4ms
952<7>[ 5.834085] c0 hub 2-0:1.0: local power source is good
953<7>[ 5.834116] c0 hub 2-0:1.0: no over-current condition exists
954<7>[ 5.834150] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub
955<7>[ 5.834488] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
956<6>[ 5.834751] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 10, 2nd_throttle = 16
957<6>[ 5.834799] c0 s5p_tmu_probe: cpufreq_level[15], busfreq_value[133133]
958<6>[ 5.834836] c0 @@@ get_refresh_interval = 0x2e
959<6>[ 5.834863] c0 @@@ get_refresh_interval = 0x5d
960<6>[ 5.834896] c0 ** temperature set value **
961<6>[ 5.834918] c0 1st throttling stop_temp = 78, start_temp = 80
962<6>[ 5.834951] c0 2nd throttling stop_temp = 87, start_tmep = 103
963<6>[ 5.834985] c0 tripping temp = 110, s/w emergency temp = 120
964<6>[ 5.835018] c0 mem throttling stop_temp = 80, start_temp = 85
965<6>[ 5.835055] c0 tc_voltage stop_temp = 13, start_temp = 10
966<4>[ 5.836234] c0 temperature code is in inaccurate -->check if vdd_18_ts is on
967<4>[ 5.836276] c0 or surrounding temp is low.
968<6>[ 5.836304] c0 current temp is -28 celsius degree.
969<6>[ 5.836330] c0 so, set to 0 celsius degree!
970<6>[ 5.836362] c0 TMU: lock is ok!
971<6>[ 5.836566] c0 mif: init_modem, system_rev = 6
972<6>[ 5.836621] c0 mif: umts_modem_cfg_gpio done
973<6>[ 5.836654] c0 mif: modem_link_pm_config_gpio done
974<3>[ 5.836967] c0 mif: modem_probe: modem_if
975<6>[ 5.837864] c0 wake enabled for irq 366
976<6>[ 5.837951] c0 wake enabled for irq 367
977<6>[ 5.837977] c0 mif: create_modemctl_device: xmm6262 is created!!!
978<6>[ 5.838538] c0 wake enabled for irq 361
979<6>[ 5.838872] c0 usbcore: registered new interface driver cdc_modem
980<6>[ 5.838921] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe95e9400)
981<6>[ 5.838962] c0 mif: hsic_create_link_device: usb : create_link_device DONE
982<3>[ 5.839000] c0 mif: modem_probe: link created: usb
983<6>[ 5.839525] c0 mif: create_io_device: Bood device = umts_boot0
984<7>[ 5.850112] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
985<6>[ 5.850715] c0 mif: modem_probe: Complete!!!
986<3>[ 5.853482] c0 [E-PEN] wacom_i2c_init: Sleep type-PEN_LDO_EN pin
987<7>[ 5.930098] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
988<6>[ 6.171658] c0 [E-PEN] wacom_i2c_query: 0th ret of wacom query=9
989<5>[ 6.171694] c0 [E-PEN] x_max=0x556A
990<5>[ 6.171716] c0 [E-PEN] y_max=0x35A2
991<5>[ 6.171738] c0 [E-PEN] pressure_max=0x3FF
992<5>[ 6.171764] c0 [E-PEN] fw_version=0x22F (d7:0x2,d8:0x2F)
993<5>[ 6.171798] c0 [E-PEN] F, 55, 88, 35, C0, 3, FF, 2, 2F
994<7>[ 6.381481] c0 [E-PEN] received checksum 1f, f1, 76, 81, 71
995<7>[ 6.501383] c0 [E-PEN] epen_connection : Pass 0
996<6>[ 6.502075] c0 input: sec_e-pen as /devices/platform/s3c2440-i2c.6/i2c-6/6-0056/input/input6
997<6>[ 6.502373] c0 wake enabled for irq 365
998<5>[ 6.503242] c0 [E-PEN] wacom fw ver : 0x22f, new fw ver : 0x22f
999<6>[ 6.503378] c0 s5p_gpioint_set_type irq:394 is at GPC1(2)
1000<6>[ 6.503596] c0 s5p_gpioint_set_type irq:392 is at GPC1(0)
1001<7>[ 6.503665] c2 [E-PEN] pdct 1(0)
1002<6>[ 6.530392] c0 max77686_rtc_read_time: 112/0/1 13:58:13(0)
1003<6>[ 6.530456] c0 max77686-rtc max77686-rtc: setting system clock to 2012-01-01 13:58:13 UTC (1325426293)
1004<7>[ 6.530622] c0 ctrl->mem.size = 0xc00000
1005<7>[ 6.530648] c0 ctrl->mem.base = 0x69b00000
1006<6>[ 6.531217] c0 FIMC0 registered successfully
1007<7>[ 6.531378] c0 ctrl->mem.size = 0x1810000
1008<7>[ 6.531404] c0 ctrl->mem.base = 0x65c00000
1009<6>[ 6.531781] c0 FIMC1 registered successfully
1010<7>[ 6.531925] c0 ctrl->mem.size = 0x0
1011<7>[ 6.531949] c0 ctrl->mem.base = 0x0
1012<6>[ 6.532321] c0 FIMC2 registered successfully
1013<7>[ 6.532472] c0 ctrl->mem.size = 0x0
1014<7>[ 6.532496] c0 ctrl->mem.base = 0xffffffea
1015<6>[ 6.532847] c0 FIMC3 registered successfully
1016<6>[ 6.533177] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
1017<7>[ 6.550055] c2 [E-PEN] pen_insert_work : 1
1018<6>[ 6.553307] c0 sec_bat_probe : SEC Battery Driver Loading
1019<6>[ 6.553367] c0 Registered interrupt support for gpio group 23.
1020<6>[ 6.553403] c0 BAT : Battery GPIO initialized.
1021<6>[ 6.553627] c0 level = 100
1022<6>[ 6.553856] c0 level = 100
1023<7>[ 6.600064] c2 [E-PEN] wacom_i2c_pendct_work , 1
1024<6>[ 6.850073] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
1025<6>[ 6.850316] c0 exynos4_handler_tmu_state: inform to init state to platform.
1026<6>[ 6.860049] c0 usb_switch_set_path: 0 current_path before changing
1027<6>[ 6.860099] c0 usb_apply_path: current gpio before changing : sel0:1 sel1:1 sel_cp:0
1028<6>[ 6.860154] c0 usb_apply_path: target path 10000000
1029<6>[ 6.860192] c0 usb_apply_path: 10000000 safeout2 no change
1030<6>[ 6.862237] c0 usb_switch_clr_path: 10000000 current_path before changing
1031<6>[ 6.862292] c0 usb_apply_path: current gpio before changing : sel0:1 sel1:0 sel_cp:0
1032<6>[ 6.862346] c0 usb_apply_path: target path 0
1033<6>[ 6.862380] c0 usb_apply_path: 0 safeout2 off
1034<6>[ 6.862414] c0 pmic_safeout2: onoff:0 No change in safeout2
1035<6>[ 6.862454] c0 usb_apply_path: send "usb_sel" sysfs_notify
1036<6>[ 6.862502] c0 sec_get_dedicted_charger_type : result(1), avg_vol(0)
1037<6>[ 6.862555] c0 sec_charger_cb:cable_type=1,tsp(1),usb(1),attached(1),usblpm(0)
1038<6>[ 6.862615] c0 set_usb_connection_state: set True
1039<6>[ 6.862651] c0 set_usb_connection_state: send "usb_state" sysfs_notify
1040<7>[ 6.862702] c0 usb: s3c_vbus_enable, not ready u_e: 0, is_active: 1
1041<6>[ 6.862746] c0 sec_charger_cb
1042<6>[ 6.862772] c0 sec_get_cable_status: current_status : 1
1043<6>[ 6.862817] c0 Charger Status : USB
1044<6>[ 6.862846] c0 sec_cable_check_status: Returning to Normal discharge path.
1045<6>[ 6.862901] c0 smb347_set_charging_state : enable(1), charging_mode(1)
1046<6>[ 6.862947] c0 smb347_charger_init
1047<6>[ 6.862974] c0 smb347_disable_charging
1048<6>[ 6.916925] c0 smb347_set_charging_state : LOW(USB5) charging enable
1049<6>[ 6.916975] c0 smb347_enable_charging
1050<6>[ 6.917243] c0 smb347_test_read
1051<6>[ 6.917583] c0 smb347 addr : 0x00 data : 0xdd
1052<6>[ 6.917929] c0 smb347 addr : 0x01 data : 0x66
1053<6>[ 6.918273] c0 smb347 addr : 0x02 data : 0xa7
1054<6>[ 6.918618] c0 smb347 addr : 0x03 data : 0x63
1055<6>[ 6.918964] c0 smb347 addr : 0x04 data : 0x80
1056<6>[ 6.919310] c0 smb347 addr : 0x05 data : 0x1a
1057<6>[ 6.919654] c0 smb347 addr : 0x06 data : 0x00
1058<6>[ 6.919999] c0 smb347 addr : 0x07 data : 0xbf
1059<6>[ 6.920366] c0 smb347 addr : 0x08 data : 0x08
1060<6>[ 6.920712] c0 smb347 addr : 0x09 data : 0x0d
1061<6>[ 6.921057] c0 smb347 addr : 0x0a data : 0x3f
1062<6>[ 6.921405] c0 smb347 addr : 0x0b data : 0x01
1063<6>[ 6.921750] c0 smb347 addr : 0x0c data : 0x00
1064<6>[ 6.922094] c0 smb347 addr : 0x0d data : 0x00
1065<6>[ 6.922439] c0 smb347 addr : 0x0e data : 0x0d
1066<6>[ 6.922789] c0 smb347 addr : 0x30 data : 0x82
1067<6>[ 6.923133] c0 smb347 addr : 0x31 data : 0x02
1068<6>[ 6.923478] c0 smb347 addr : 0x32 data : 0x0d
1069<6>[ 6.923826] c0 smb347 addr : 0x33 data : 0x0d
1070<6>[ 6.924171] c0 smb347 addr : 0x34 data : 0x27
1071<6>[ 6.924517] c0 smb347 addr : 0x35 data : 0x00
1072<6>[ 6.924865] c0 smb347 addr : 0x36 data : 0x00
1073<6>[ 6.925210] c0 smb347 addr : 0x37 data : 0x00
1074<6>[ 6.925554] c0 smb347 addr : 0x38 data : 0x40
1075<6>[ 6.925903] c0 smb347 addr : 0x39 data : 0x10
1076<6>[ 6.926248] c0 smb347 addr : 0x3a data : 0x01
1077<6>[ 6.926592] c0 smb347 addr : 0x3b data : 0x23
1078<6>[ 6.926941] c0 smb347 addr : 0x3c data : 0x1e
1079<6>[ 6.927286] c0 smb347 addr : 0x3d data : 0x03
1080<6>[ 6.927632] c0 smb347 addr : 0x3e data : 0x00
1081<6>[ 6.927980] c0 smb347 addr : 0x3f data : 0xc6
1082<6>[ 6.928326] c0 cable USB
1083<6>[ 6.929143] c0 fg_read_temp: temper(26776, 0x1ac7)
1084<6>[ 6.930153] c2 s5p_gpioint_set_type irq:419 is at GPM0(3)
1085<6>[ 6.930342] c0 fg_read_soc: soc(9), psoc(942), vfsoc(7)
1086<6>[ 6.930507] c2 wake enabled for irq 364
1087<6>[ 6.931173] c2 fg_read_vcell: vcell(3674, 0xb7ba)
1088<6>[ 6.932765] c2 fg_read_current: curr(-43), avg_curr(-64mA)
1089<6>[ 6.934755] c0 fg_check_vf_fullcap_range: prevVFFCap(0x4976), newVFFcap(0x4976)
1090<6>[ 6.934814] c0 fg_check_vf_fullcap_range: keep VFFCap: newVFFcap(0x4976)
1091<6>[ 6.936735] c2 avg_v(3673), fullcap(7064), remcap(666), mixcap(669), avcap(665)
1092<6>[ 6.937133] c0 fg_read_soc: soc(9), psoc(942), vfsoc(7)
1093<6>[ 6.937555] c0 fg_read_vcell: vcell(3674, 0xb7ba)
1094<6>[ 6.938349] c0 fg_read_current: curr(-43), avg_curr(-64mA)
1095<6>[ 6.940303] c0 avg_v(3673), fullcap(7064), remcap(666), mixcap(669), avcap(665)
1096<6>[ 6.960054] c2 [MAX17042] 1/1/2012 13:58,
1097<6>[ 6.966146] c2 0000h,ff00h,7f80h,ff01h,0000h,0534h,096ch,4ae7h,
1098<6>[ 6.966189] c2 1ac7h,b7bah,feech,fe63h,0008h,0714h,0969h,053ah,
1099<6>[ 6.970059] c0 [MAX17042] 1/1/2012 13:58,
1100<6>[ 6.976163] c0 0000h,ff00h,7f80h,ff01h,0000h,0534h,096ch,4ae7h,
1101<6>[ 6.976202] c0 1ac7h,b7bah,feech,fe63h,0008h,0714h,0969h,053ah,
1102<6>[ 6.996115] c2 3730h,19c3h,7d5ah,0000h,0318h,0148h,1abdh,00a9h,
1103<6>[ 6.996157] c2 4996h,b7afh,2114h,c87bh,2ed6h,2214h,0600h,0532h,
1104<6>[ 7.006112] c0 3730h,19c3h,7d5ah,0000h,0318h,0148h,1abdh,00a9h,
1105<6>[ 7.006152] c0 4996h,b7afh,2114h,c87bh,2ed6h,2214h,0600h,0532h,
1106<6>[ 7.026111] c2 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7deeh,
1107<6>[ 7.026151] c2 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1108<6>[ 7.036105] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7deeh,
1109<6>[ 7.036144] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1110<7>[ 7.040048] c0 s5p-ohci s5p-ohci: auto-stop root hub
1111<6>[ 7.056112] c2 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1112<6>[ 7.056153] c2 0076h,1a1ch,007dh,0502h,1680h,5408h,5f81h,e000h,
1113<6>[ 7.066099] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1114<6>[ 7.066141] c0 0076h,1a1ch,007dh,0502h,1680h,5408h,5f81h,e000h,
1115<6>[ 7.066204] c0 Atmel MXT1664S 3-004a: charging mode
1116<6>[ 7.086152] c2 6800h,6010h,f723h,1b80h,b7a4h,12eah,337eh,ffa9h,
1117<6>[ 7.086197] c2 0787h,0304h,054eh,3b00h,054dh,052dh,b6f1h,7406h,
1118<6>[ 7.096120] c0 6800h,6010h,f723h,1b80h,b7a4h,12eah,337eh,ffa9h,
1119<6>[ 7.096161] c0 0787h,0304h,054eh,3b00h,054dh,052dh,b6f1h,7406h,
1120<6>[ 7.116122] c2 0c47h,0af3h,0001h,167dh,0003h,0002h,fcbch,ffffh,
1121<6>[ 7.116166] c2 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1122<6>[ 7.126108] c0 0c47h,0af3h,0001h,167dh,0003h,0002h,fcbch,ffffh,
1123<6>[ 7.126148] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1124<6>[ 7.146104] c2 0000h,0000h,0000h,0000h,0000h,0000h,0714h,046ah,
1125<6>[ 7.146147] c2 3ef7h,4d04h,fe54h,b8e2h,0070h,3910h,b7a2h,0730h,
1126<6>[ 7.156117] c0 0000h,0000h,0000h,0000h,0000h,0000h,0714h,0322h,
1127<6>[ 7.156157] c0 3ef7h,4d04h,fe54h,b8e2h,0070h,3910h,b7a2h,0730h,
1128<6>[ 7.170070] c2
1129<6>[ 7.180057] c0
1130<6>[ 7.181152] c0 smb347_get_charging_state : 0x3dh(0x05)
1131<6>[ 7.181200] c0 BAT : soc(9), vcell(3674mV), curr(-43mA), avg curr(-64mA), temp(26.7), chg(1)
1132<6>[ 7.181264] c0 , full(0), rechg(0), lowbat(0), cable(1)
1133<6>[ 7.181351] c0 level = 9
1134<6>[ 7.234529] c2 wake enabled for irq 371
1135<6>[ 7.234563] c2 lpm_mode_check : charging_mode_booting(0)
1136<6>[ 7.237102] c2 [ ACCESSORY (acc_con_init,876) ]
1137<6>[ 7.237206] c2 [ ACCESSORY (acc_con_probe,658) ]
1138<4>[ 7.237842] c2 dhd_module_init in
1139<4>[ 7.237876] c2 found wifi platform device bcmdhd_wlan
1140<4>[ 7.238001] c2 Power-up adapter 'DHD generic adapter'
1141<4>[ 7.238202] c2 wifi_platform_set_power = 1
1142<4>[ 7.238234] c2 ------------------------------------------------------------------------------------------------
1143<4>[ 7.238306] c2 brcm_wlan_power Enter: power on
1144<6>[ 7.238340] c2 111brcm_wlan_power Enter: power on
1145<4>[ 7.238375] c2 gpio_table = [2]
1146<7>[ 7.238507] c2 WLAN: GPIO_WLAN_EN = 1
1147<4>[ 7.440046] c2 wifi_platform_bus_enumerate device present 1
1148<4>[ 7.440088] c2 gpio_table = [6]
1149<6>[ 7.440224] c2 mmc2: card inserted.
1150<6>[ 7.680383] c0 mmc2: cmd 52 command timeout error
1151<6>[ 7.680765] c0 mmc2: cmd 52 command timeout error
1152<6>[ 7.682850] c0 mmc2: cmd 8 command timeout error
1153<4>[ 7.698287] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
1154<4>[ 7.700898] c0 mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
1155<4>[ 7.703823] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
1156<4>[ 7.710592] c0 mmc2: queuing unknown CIS tuple 0x80 (19 bytes)
1157<6>[ 7.778747] c0 mmc2: new high speed SDIO card at address 0001
1158<4>[ 7.797612] c2 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
1159<4>[ 7.797820] c2 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
1160<4>[ 7.797892] c2 bus num (host idx)=2, slot num (rca)=1
1161<4>[ 7.797958] c2 found adapter info 'DHD generic adapter'
1162<4>[ 7.798157] c2 alloc static buf at e9280000!
1163<4>[ 7.810428] c0 F1 signature OK, socitype:0x1 chip:0x4334 rev:0x3 pkg:0x0
1164<4>[ 7.812534] c0 DHD: dongle ram size is set to 524288(orig 524288) at 0x0
1165<4>[ 7.814629] c0 wifi_platform_prealloc: failed to alloc static mem section 7
1166<4>[ 7.816776] c0 wl_create_event_handler(): thread:wl_event_handler:530 started
1167<6>[ 7.816864] c2 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe9756608
1168<4>[ 7.827707] c0 p2p0: P2P Interface Registered
1169<4>[ 7.827992] c0 dhd_attach(): thread:dhd_watchdog_thread:536 started
1170<4>[ 7.828254] c0 dhd_attach(): thread:dhd_dpc:537 started
1171<4>[ 7.828353] c0 dhd_deferred_work_init: work queue initialized
1172<4>[ 7.828910] c0 Dongle Host Driver, version 1.141.44.4 (r)
1173<4>[ 7.828973] c0 Compiled in drivers/net/wireless/bcmdhd on Nov 5 2019 at 18:40:48
1174<4>[ 7.839220] c0 Register interface [wlan0] MAC: 00:61:e7
1175<4>[ 7.839280] c0
1176<4>[ 7.839325] c0 dhd_prot_ioctl : bus is down. we have nothing to do
1177<4>[ 7.839409] c0 dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
1178<4>[ 7.839773] c0 wifi_platform_set_power = 0
1179<4>[ 7.839831] c0 ------------------------------------------------------------------------------------------------
1180<4>[ 7.839954] c0 brcm_wlan_power Enter: power off
1181<6>[ 7.840184] c0 111brcm_wlan_power Enter: power off
1182<4>[ 7.840252] c0 gpio_table = [2]
1183<7>[ 7.840310] c0 WLAN: GPIO_WLAN_EN = 0
1184<6>[ 7.850112] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
1185<6>[ 7.850608] c0 normal: free cpufreq_limit & interrupt enable.
1186<4>[ 7.951400] c0 Warning: unable to open an initial console.
1187<6>[ 7.951606] c0 Freeing init memory: 296K
1188<7>[ 7.980206] c2 hub 1-0:1.0: hub_suspend
1189<7>[ 7.980313] c2 usb usb1: bus auto-suspend
1190<7>[ 7.980379] c2 s5p-ehci s5p-ehci: suspend root hub
1191<7>[ 8.040234] c0 hub 2-0:1.0: hub_suspend
1192<7>[ 8.040354] c0 usb usb2: bus auto-suspend
1193<7>[ 8.040433] c0 s5p-ohci s5p-ohci: suspend root hub
1194<3>[ 8.086682] c2 request_module: runaway loop modprobe personality-8
1195<3>[ 8.212074] c0 request_module: runaway loop modprobe personality-8
1196<3>[ 8.324205] c0 request_module: runaway loop modprobe personality-8
1197<3>[ 8.396712] c0 request_module: runaway loop modprobe personality-8
1198<3>[ 8.467124] c0 request_module: runaway loop modprobe personality-8
1199<6>[ 10.960499] c2 currentlimit_irq_thread gpio : 222, value : 0
1200<3>[ 13.992622] c1 EXT2-fs (mmcblk0p12): error: couldn't mount because of unsupported optional features (40)
1201<3>[ 14.060871] c1 EXT4-fs (mmcblk0p12): couldn't mount as ext3 due to feature incompatibilities
1202<6>[ 14.136007] c0 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
1203<3>[ 14.291571] c1 EXT2-fs (loop0): error: couldn't mount because of unsupported optional features (244)
1204<3>[ 14.370384] c2 EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
1205<6>[ 14.428885] c2 EXT4-fs (loop0): recovery complete
1206<6>[ 14.428915] c2 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
1207<7>[ 16.000466] c0 usb: usb_ready udc_enable=1
1208<7>[ 16.000496] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
1209<7>[ 16.000527] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=0
1210<6>[ 16.000583] c0 s3c-usbgadget s3c-usbgadget: usb phy usage(22)
1211<3>[ 16.000616] c0 s3c-usbgadget s3c-usbgadget: Already power on PHY
1212<7>[ 16.000650] c0 usb: set_exynos_usb_phy_tune old phy0 tune=0x2819b3 t=0
1213<7>[ 16.000689] c0 usb: set_exynos_usb_phy_tune new phy0 tune=0x2831b3
1214<7>[ 16.000721] c0 usb: s5p_usb_phy0_tune read original tune
1215<7>[ 16.000753] c0 usb: s5p_usb_phy0_tune save default phytune (0x2831b3)
1216<7>[ 16.000788] c0 usb: s5p_usb_phy0_tune original tune=0x2831b3
1217<7>[ 16.000824] c0 usb: s5p_usb_phy0_tune tune_mask=0x0, tune=0x0
1218<7>[ 16.000853] c0 usb: s5p_usb_phy0_tune default tune
1219<7>[ 16.001403] c0 usb: udc_core_disconect -dev->softconnect=0
1220<7>[ 16.005112] c1 usb: enable_store enabled=0, !dev->enabled=1
1221<7>[ 16.005140] c1 usb: usb_gadget_disconnect
1222<7>[ 16.005489] c1 usb: enable_store enabled=1, !dev->enabled=1
1223<7>[ 16.005517] c1 usb: enable_store vendor=18d1,product=1,bcdDevice=226
1224<7>[ 16.005549] c1 ,Class=0,SubClass=0,Protocol=0
1225<7>[ 16.005572] c1 usb: enable_store next cmd : usb_add_config
1226<7>[ 16.005599] c1 usb: usb_gadget_connect
1227<7>[ 16.218017] c0 usb: GET_DES
1228<7>[ 16.218134] c0 usb: android_work config= (null),connected=1,sw_connected=0
1229<7>[ 16.219143] c0 usb: android_work sent uevent USB_STATE=CONNECTED
1230<7>[ 16.326380] c0 usb: GET_DES
1231<7>[ 16.414685] c0 usb: GET_DES
1232<7>[ 16.523055] c0 usb: GET_DES
1233<7>[ 16.569877] c3 usb: enable_store enabled=0, !dev->enabled=0
1234<7>[ 16.569953] c3 usb: usb_gadget_disconnect
1235<7>[ 16.570119] c3 usb: usb_remove_config cdev->config= (null), config=c0cd6c1c
1236<7>[ 16.577948] c3 usb: functions_store buff=rndis,mass_storage
1237<7>[ 16.578033] c3 usb: android_enable_function name=rndis
1238<7>[ 16.578106] c3 usb: android_enable_function name=mass_storage
1239<7>[ 16.578182] c3 usb: android_enable_function name=hid
1240<7>[ 16.579052] c3 usb: enable_store enabled=1, !dev->enabled=1
1241<7>[ 16.579131] c3 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
1242<7>[ 16.579217] c3 ,Class=0,SubClass=0,Protocol=0
1243<7>[ 16.579276] c3 usb: enable_store next cmd : usb_add_config
1244<7>[ 16.579348] c3 usb: android_bind_enabled_functions f:rndis
1245<4>[ 16.579496] c3 android_usb gadget: using random self ethernet address
1246<4>[ 16.579594] c3 android_usb gadget: using random host ethernet address
1247<7>[ 16.580114] c3 usb: android_work config= (null),connected=0,sw_connected=1
1248<7>[ 16.581179] c3 usb: android_work sent uevent USB_STATE=DISCONNECTED
1249<6>[ 16.596315] c3 rndis0: MAC 46:dd:4b:12:33:6a
1250<6>[ 16.596413] c3 rndis0: HOST MAC ea:4e:43:47:e9:11
1251<7>[ 16.597874] c3 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=1
1252<7>[ 16.597998] c3 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=2
1253<7>[ 16.598107] c3 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=3
1254<7>[ 16.598277] c3 usb: android_bind_enabled_functions f:mass_storage
1255<7>[ 16.598410] c3 usb: android_bind_enabled_functions f:hid
1256<6>[ 16.598518] c3 hid keyboard
1257<7>[ 16.598598] c3 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=4
1258<6>[ 16.598725] c3 hidg_bind: creating device e946ea00
1259<6>[ 16.602164] c3 hid mouse
1260<6>[ 16.602245] c3 hidg_bind: creating device e946ed00
1261<7>[ 16.604139] c3 usb: usb_gadget_connect
1262<7>[ 16.627672] c1 usb: eth_open ++
1263<6>[ 16.632214] c0 ADDRCONF(NETDEV_UP): rndis0: link is not ready
1264<7>[ 17.165216] c0 usb: GET_DES
1265<7>[ 17.165265] c0 usb: android_work config= (null),connected=1,sw_connected=0
1266<7>[ 17.165353] c0 usb: GET_DES
1267<7>[ 17.165578] c0 usb: android_work sent uevent USB_STATE=CONNECTED
1268<6>[ 17.166558] c0 android_usb gadget: high speed config #1: android
1269<7>[ 17.166596] c0 usb: gether_connect ++
1270<7>[ 17.166620] c0 usb: gether_connect enable ep in/out
1271<7>[ 17.166656] c0 usb: gether_connect qlen=10
1272<7>[ 17.166683] c0 usb: gether_connect netif_carrier_on
1273<7>[ 17.166720] c0 usb: gether_connect eth_start
1274<7>[ 17.166745] c0 usb: eth_start ++
1275<7>[ 17.166814] c0 usb: SET_CON
1276<6>[ 17.167394] c0 ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1277<7>[ 17.167587] c0 usb: android_work config=c0cd6c1c,connected=1,sw_connected=1
1278<7>[ 17.167934] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
1279<7>[ 17.202862] c0 usb: android_work config=c0cd6c1c,connected=1,sw_connected=1
1280<7>[ 17.203218] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
1281<6>[ 17.240063] c2 [ ACCESSORY (acc_dwork_int_init,544) ]
1282<6>[ 17.240412] c2 wake enabled for irq 363
1283<6>[ 17.240673] c2 wake enabled for irq 356
1284<7>[ 17.592953] c0 usb: android_work config=c0cd6c1c,connected=1,sw_connected=1
1285<7>[ 17.594024] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
1286<7>[ 28.040062] c0 rndis0: no IPv6 routers present
1287<6>[ 30.730533] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=330
1288<6>[ 37.261289] c0 fg_read_temp: temper(26744, 0x1abf)
1289<6>[ 37.262969] c0 fg_read_soc: soc(9), psoc(941), vfsoc(7)
1290<6>[ 37.266785] c0 fg_read_soc: soc(9), psoc(941), vfsoc(7)
1291<6>[ 37.267400] c0 fg_read_vcell: vcell(3672, 0xb7a4)
1292<6>[ 37.268539] c0 fg_read_current: curr(-56), avg_curr(-82mA)
1293<6>[ 37.271399] c0 avg_v(3670), fullcap(7064), remcap(665), mixcap(668), avcap(663)
1294<6>[ 37.300168] c0 [MAX17042] 1/1/2012 13:58,
1295<6>[ 37.308814] c0 0000h,ff00h,7f80h,ff01h,0000h,0532h,0969h,4ae7h,
1296<6>[ 37.308882] c0 1abfh,b7a4h,fe97h,fdf2h,000ah,0711h,0963h,0538h,
1297<6>[ 37.338728] c0 3730h,142ah,7d5ah,0000h,0318h,0148h,1abeh,00a9h,
1298<6>[ 37.338796] c0 4996h,b783h,2114h,c87bh,2ed6h,2214h,0600h,052eh,
1299<6>[ 37.368743] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7e00h,
1300<6>[ 37.368810] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1301<6>[ 37.398688] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1302<6>[ 37.398754] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,602eh,e000h,
1303<6>[ 37.428689] c0 8800h,7190h,f723h,1880h,b77bh,12eah,337eh,ffa9h,
1304<6>[ 37.428755] c0 0787h,0065h,054eh,1f00h,054dh,052bh,b3a6h,7000h,
1305<6>[ 37.458704] c0 068eh,000fh,f911h,0001h,6ffdh,006bh,3393h,0000h,
1306<6>[ 37.458769] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1307<6>[ 37.488654] c0 0000h,0000h,0000h,0000h,0000h,0000h,0711h,09d0h,
1308<6>[ 37.488722] c0 3f00h,4d0ch,fe58h,b8e1h,0070h,3910h,b7b6h,0730h,
1309<6>[ 37.510153] c0
1310<6>[ 37.511722] c0 smb347_get_charging_state : 0x3dh(0x05)
1311<6>[ 37.511810] c0 BAT : soc(9), vcell(3672mV), curr(-56mA), avg curr(-82mA), temp(26.7), chg(1)
1312<6>[ 37.511915] c0 , full(0), rechg(0), lowbat(0), cable(1)
1313<6>[ 37.512174] c0 level = 9
1314<6>[ 37.681390] c2 level = 9
1315<6>[ 60.830612] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=310
1316<6>[ 62.081283] c2 failed to copy MFC F/W during init
1317<6>[ 67.571256] c0 fg_read_temp: temper(26776, 0x1ac7)
1318<6>[ 67.572939] c0 fg_read_soc: soc(9), psoc(939), vfsoc(7)
1319<6>[ 67.576764] c0 fg_read_soc: soc(9), psoc(939), vfsoc(7)
1320<6>[ 67.577378] c0 fg_read_vcell: vcell(3675, 0xb7c4)
1321<6>[ 67.578525] c0 fg_read_current: curr(-53), avg_curr(-64mA)
1322<6>[ 67.581326] c0 avg_v(3672), fullcap(7064), remcap(664), mixcap(667), avcap(663)
1323<6>[ 67.610137] c0 [MAX17042] 1/1/2012 13:59,
1324<6>[ 67.618789] c0 0000h,ff00h,7f80h,ff01h,0000h,0531h,0966h,4ae7h,
1325<6>[ 67.618856] c0 1ac7h,b7c4h,fea8h,fe63h,0008h,070eh,0963h,0536h,
1326<6>[ 67.648655] c0 3730h,19afh,7d5ah,0000h,0318h,0148h,1abfh,00a9h,
1327<6>[ 67.648720] c0 4996h,b79ch,2114h,c87bh,2ed6h,2214h,0600h,052eh,
1328<6>[ 67.678648] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7deeh,
1329<6>[ 67.678716] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1330<6>[ 67.708668] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1331<6>[ 67.708733] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,60dbh,e000h,
1332<6>[ 67.738654] c0 8000h,14b0h,f723h,0b00h,b77bh,12eah,337eh,ffa9h,
1333<6>[ 67.738721] c0 0787h,f2d1h,054eh,3900h,054dh,052ah,a565h,6de5h,
1334<6>[ 67.768666] c0 0c47h,0a2bh,0001h,167dh,0003h,0003h,0763h,ffffh,
1335<6>[ 67.768731] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1336<6>[ 67.798623] c0 0000h,0000h,0000h,0000h,0000h,0000h,070eh,fcbch,
1337<6>[ 67.798689] c0 3ef7h,4d0fh,fe7bh,b8e0h,0070h,3910h,b7bch,0730h,
1338<6>[ 67.820098] c0
1339<6>[ 67.821663] c0 smb347_get_charging_state : 0x3dh(0x05)
1340<6>[ 67.821753] c0 BAT : soc(9), vcell(3675mV), curr(-53mA), avg curr(-64mA), temp(26.7), chg(1)
1341<6>[ 67.821853] c0 , full(0), rechg(0), lowbat(0), cable(1)
1342<6>[ 67.822042] c0 level = 9
1343<6>[ 67.985480] c3 level = 9
1344<6>[ 97.881258] c0 fg_read_temp: temper(26760, 0x1ac3)
1345<6>[ 97.882939] c0 fg_read_soc: soc(9), psoc(939), vfsoc(6)
1346<6>[ 97.886758] c0 fg_read_soc: soc(9), psoc(939), vfsoc(6)
1347<6>[ 97.887369] c0 fg_read_vcell: vcell(3675, 0xb7cc)
1348<6>[ 97.888510] c0 fg_read_current: curr(-65), avg_curr(-61mA)
1349<6>[ 97.891317] c0 avg_v(3673), fullcap(7064), remcap(664), mixcap(666), avcap(663)
1350<6>[ 97.920114] c0 [MAX17042] 1/1/2012 13:59,
1351<6>[ 97.928753] c0 0000h,ff00h,7f80h,ff01h,0000h,0530h,0966h,4ae7h,
1352<6>[ 97.928818] c0 1ac3h,b7cch,fe60h,fe77h,0006h,070eh,0963h,0535h,
1353<6>[ 97.958702] c0 3730h,1b03h,7d5ah,0000h,0318h,0148h,1abfh,00a9h,
1354<6>[ 97.958767] c0 4996h,b7a9h,2114h,c87bh,2ed6h,2214h,0600h,052fh,
1355<6>[ 97.988662] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df8h,
1356<6>[ 97.988729] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1357<6>[ 98.018654] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1358<6>[ 98.018719] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,6187h,e000h,
1359<6>[ 98.048676] c0 e000h,a030h,f723h,0080h,b77bh,12eah,337eh,ffa9h,
1360<6>[ 98.048742] c0 0787h,e663h,050dh,ba00h,054dh,0529h,9abeh,6bcch,
1361<6>[ 98.078644] c0 0c15h,4976h,0001h,0003h,0007h,0000h,0763h,ffffh,
1362<6>[ 98.078711] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1363<6>[ 98.108617] c0 0000h,0000h,0000h,0000h,0000h,0000h,070eh,0616h,
1364<6>[ 98.108682] c0 3efdh,4d0eh,fe38h,b8dfh,0070h,3910h,b7bah,06d9h,
1365<6>[ 98.130101] c0
1366<6>[ 98.131670] c0 smb347_get_charging_state : 0x3dh(0x05)
1367<6>[ 98.131759] c0 BAT : soc(9), vcell(3675mV), curr(-65mA), avg curr(-61mA), temp(26.7), chg(1)
1368<6>[ 98.131858] c0 , full(0), rechg(0), lowbat(0), cable(1)
1369<6>[ 98.132041] c0 level = 9
1370<6>[ 98.287588] c3 level = 9
1371<6>[ 128.191260] c0 fg_read_temp: temper(26760, 0x1ac3)
1372<6>[ 128.192949] c0 fg_read_soc: soc(9), psoc(938), vfsoc(6)
1373<6>[ 128.196782] c0 fg_read_soc: soc(9), psoc(938), vfsoc(6)
1374<6>[ 128.197397] c0 fg_read_vcell: vcell(3674, 0xb7b6)
1375<6>[ 128.198542] c0 fg_read_current: curr(-61), avg_curr(-61mA)
1376<6>[ 128.201355] c0 avg_v(3673), fullcap(7064), remcap(663), mixcap(666), avcap(663)
1377<6>[ 128.230118] c0 [MAX17042] 1/1/2012 14:00,
1378<6>[ 128.238715] c0 0000h,ff00h,7f80h,ff01h,0000h,052eh,0963h,4ae7h,
1379<6>[ 128.238782] c0 1ac3h,b7b6h,fe24h,fe79h,0006h,070bh,0963h,0534h,
1380<6>[ 128.268662] c0 3730h,1b21h,7d5ah,0000h,0318h,0148h,1ac0h,00a9h,
1381<6>[ 128.268727] c0 4996h,b7b2h,2114h,c87bh,2ed6h,2214h,0600h,052eh,
1382<6>[ 128.298657] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df8h,
1383<6>[ 128.298722] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1384<6>[ 128.328649] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1385<6>[ 128.328713] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,6234h,e000h,
1386<6>[ 128.358659] c0 c000h,1230h,f723h,f480h,b77bh,12eah,337eh,ffa9h,
1387<6>[ 128.358727] c0 0787h,dc6ch,050dh,1e00h,054dh,0528h,92cbh,69b8h,
1388<6>[ 128.388635] c0 0266h,0000h,8500h,0006h,0000h,0000h,0800h,fffeh,
1389<6>[ 128.388705] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1390<6>[ 128.418617] c0 0000h,0000h,0000h,0000h,0000h,0000h,070bh,f8ech,
1391<6>[ 128.418682] c0 3efch,4d08h,feb6h,b8deh,0070h,3910h,b7ach,06d9h,
1392<6>[ 128.440121] c0
1393<6>[ 128.441690] c0 smb347_get_charging_state : 0x3dh(0x05)
1394<6>[ 128.441776] c0 BAT : soc(9), vcell(3674mV), curr(-61mA), avg curr(-61mA), temp(26.7), chg(1)
1395<6>[ 128.441877] c0 , full(0), rechg(0), lowbat(0), cable(1)
1396<6>[ 128.442138] c0 level = 9
1397<6>[ 128.590630] c3 level = 9
1398<6>[ 158.501253] c0 fg_read_temp: temper(26744, 0x1abf)
1399<6>[ 158.502933] c0 fg_read_soc: soc(9), psoc(937), vfsoc(6)
1400<6>[ 158.506752] c0 fg_read_soc: soc(9), psoc(937), vfsoc(6)
1401<6>[ 158.507368] c0 fg_read_vcell: vcell(3675, 0xb7c0)
1402<6>[ 158.508507] c0 fg_read_current: curr(-55), avg_curr(-61mA)
1403<6>[ 158.511309] c0 avg_v(3674), fullcap(7064), remcap(662), mixcap(665), avcap(662)
1404<6>[ 158.540117] c0 [MAX17042] 1/1/2012 14:00,
1405<6>[ 158.548760] c0 0000h,ff00h,7f80h,ff01h,0000h,052dh,0960h,4ae7h,
1406<6>[ 158.548825] c0 1abfh,b7c0h,fe9fh,fe79h,0006h,070bh,0960h,0533h,
1407<6>[ 158.578685] c0 3730h,1b1ch,7d5ah,0000h,0318h,0148h,1ac0h,00a9h,
1408<6>[ 158.578750] c0 4996h,b7b5h,2114h,c87bh,2ed6h,2214h,0600h,052dh,
1409<6>[ 158.608706] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7e16h,
1410<6>[ 158.608771] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1411<6>[ 158.638646] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1412<6>[ 158.638713] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,62e0h,e000h,
1413<6>[ 158.668673] c0 3800h,6310h,f723h,e880h,b77bh,12eah,337eh,ffa9h,
1414<6>[ 158.668737] c0 0787h,d035h,050dh,3200h,054dh,0527h,889bh,67a0h,
1415<6>[ 158.698644] c0 0c47h,0a2bh,0001h,167dh,0003h,0001h,0763h,ffffh,
1416<6>[ 158.698711] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1417<6>[ 158.728620] c0 0000h,0000h,0000h,0000h,0000h,0000h,070bh,022fh,
1418<6>[ 158.728687] c0 3f0bh,4d17h,fe44h,b8ddh,0070h,3910h,b7d0h,06d9h,
1419<6>[ 158.750122] c0
1420<6>[ 158.751689] c0 smb347_get_charging_state : 0x3dh(0x05)
1421<6>[ 158.751778] c0 BAT : soc(9), vcell(3675mV), curr(-55mA), avg curr(-61mA), temp(26.7), chg(1)
1422<6>[ 158.751885] c0 , full(0), rechg(0), lowbat(0), cable(1)
1423<6>[ 158.752140] c0 level = 9
1424<6>[ 158.893610] c3 level = 9
1425<6>[ 188.811253] c0 fg_read_temp: temper(26760, 0x1ac3)
1426<6>[ 188.812935] c0 fg_read_soc: soc(9), psoc(937), vfsoc(6)
1427<6>[ 188.816755] c0 fg_read_soc: soc(9), psoc(937), vfsoc(6)
1428<6>[ 188.817366] c0 fg_read_vcell: vcell(3676, 0xb7d6)
1429<6>[ 188.818506] c0 fg_read_current: curr(-63), avg_curr(-61mA)
1430<6>[ 188.821314] c0 avg_v(3674), fullcap(7064), remcap(662), mixcap(665), avcap(662)
1431<6>[ 188.850139] c0 [MAX17042] 1/1/2012 14:01,
1432<6>[ 188.858782] c0 0000h,ff00h,7f80h,ff01h,0000h,052ch,0960h,4ae7h,
1433<6>[ 188.858848] c0 1ac3h,b7d6h,fe68h,fe78h,0006h,0708h,0960h,0532h,
1434<6>[ 188.888660] c0 3730h,1b05h,7d5ah,0000h,0318h,0148h,1ac0h,00a9h,
1435<6>[ 188.888728] c0 4996h,b7b6h,2114h,c87bh,2ed6h,2214h,0600h,052ch,
1436<6>[ 188.918710] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df8h,
1437<6>[ 188.918776] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1438<6>[ 188.948634] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1439<6>[ 188.948700] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,638dh,e000h,
1440<6>[ 188.978637] c0 5800h,a5f0h,f723h,df00h,b77bh,12eah,337eh,ffa9h,
1441<6>[ 188.978704] c0 0787h,c696h,050dh,1b00h,054dh,0526h,8100h,658dh,
1442<6>[ 189.008662] c0 0561h,49d0h,f7f6h,0003h,0240h,0000h,0708h,0000h,
1443<6>[ 189.008732] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1444<6>[ 189.038595] c0 0000h,0000h,0000h,0000h,0000h,0000h,0708h,f4d4h,
1445<6>[ 189.038660] c0 3efch,4d0eh,fe59h,b8dch,0070h,3910h,b7bah,06d9h,
1446<6>[ 189.060126] c0
1447<6>[ 189.061691] c0 smb347_get_charging_state : 0x3dh(0x05)
1448<6>[ 189.061774] c0 BAT : soc(9), vcell(3676mV), curr(-63mA), avg curr(-61mA), temp(26.7), chg(1)
1449<6>[ 189.061872] c0 , full(0), rechg(0), lowbat(0), cable(1)
1450<6>[ 189.062130] c0 level = 9
1451<6>[ 189.231621] c3 level = 9
1452<6>[ 219.121292] c0 fg_read_temp: temper(26764, 0x1ac4)
1453<6>[ 219.122973] c0 fg_read_soc: soc(9), psoc(935), vfsoc(6)
1454<6>[ 219.126793] c0 fg_read_soc: soc(9), psoc(935), vfsoc(6)
1455<6>[ 219.127401] c0 fg_read_vcell: vcell(3675, 0xb7c8)
1456<6>[ 219.128543] c0 fg_read_current: curr(-67), avg_curr(-61mA)
1457<6>[ 219.131404] c0 avg_v(3674), fullcap(7064), remcap(661), mixcap(664), avcap(661)
1458<6>[ 219.160167] c0 [MAX17042] 1/1/2012 14:01,
1459<6>[ 219.168807] c0 0000h,ff00h,7f80h,ff01h,0000h,052bh,095ch,4ae7h,
1460<6>[ 219.168877] c0 1ac4h,b7c8h,fe53h,fe78h,0006h,0708h,095ch,0531h,
1461<6>[ 219.198717] c0 3730h,1b00h,7d5ah,0000h,0318h,0148h,1ac0h,00a9h,
1462<6>[ 219.198787] c0 4996h,b7b9h,2114h,c87bh,2ed6h,2214h,0600h,052bh,
1463<6>[ 219.228714] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df0h,
1464<6>[ 219.228782] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1465<6>[ 219.258706] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1466<6>[ 219.258771] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,643ah,e000h,
1467<6>[ 219.288697] c0 6800h,e390h,f723h,d280h,b77bh,12eah,337eh,ffa9h,
1468<6>[ 219.288764] c0 0787h,ba4bh,050dh,2200h,054dh,0525h,76bch,6374h,
1469<6>[ 219.318694] c0 0c47h,0a2bh,0001h,167dh,0003h,0002h,0763h,ffffh,
1470<6>[ 219.318757] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1471<6>[ 219.348656] c0 0000h,0000h,0000h,0000h,0000h,0000h,0708h,fe1eh,
1472<6>[ 219.348723] c0 3ef8h,4d0dh,fe6fh,b8dbh,0070h,3910h,b7aeh,06d9h,
1473<6>[ 219.370134] c0
1474<6>[ 219.371703] c0 smb347_get_charging_state : 0x3dh(0x05)
1475<6>[ 219.371788] c0 BAT : soc(9), vcell(3675mV), curr(-67mA), avg curr(-61mA), temp(26.7), chg(1)
1476<6>[ 219.371889] c0 , full(0), rechg(0), lowbat(0), cable(1)
1477<6>[ 219.372076] c0 level = 9
1478<6>[ 219.559968] c2 level = 9
1479<6>[ 249.441257] c0 fg_read_temp: temper(26760, 0x1ac3)
1480<6>[ 249.442938] c0 fg_read_soc: soc(9), psoc(935), vfsoc(6)
1481<6>[ 249.446763] c0 fg_read_soc: soc(9), psoc(935), vfsoc(6)
1482<6>[ 249.447375] c0 fg_read_vcell: vcell(3675, 0xb7c2)
1483<6>[ 249.448516] c0 fg_read_current: curr(-60), avg_curr(-61mA)
1484<6>[ 249.451320] c0 avg_v(3674), fullcap(7064), remcap(661), mixcap(664), avcap(661)
1485<6>[ 249.480115] c0 [MAX17042] 1/1/2012 14:02,
1486<6>[ 249.488768] c0 0000h,ff00h,7f80h,ff01h,0000h,052ah,095ch,4ae7h,
1487<6>[ 249.488832] c0 1ac3h,b7c2h,fe7ch,fe78h,0006h,0708h,0959h,0530h,
1488<6>[ 249.518716] c0 3730h,1afah,7d5ah,0000h,0318h,0148h,1ac0h,00a9h,
1489<6>[ 249.518784] c0 4996h,b7b9h,2114h,c87bh,2ed6h,2214h,0600h,052ah,
1490<6>[ 249.548691] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df6h,
1491<6>[ 249.548758] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
1492<6>[ 249.578650] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
1493<6>[ 249.578715] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,64e6h,e000h,
1494<6>[ 249.608680] c0 1000h,fe50h,f723h,c780h,b77bh,12eah,337eh,ffa9h,
1495<6>[ 249.608745] c0 0787h,ad67h,050dh,8100h,054dh,0524h,6bdfh,615ah,
1496<6>[ 249.638650] c0 0c15h,4976h,0001h,0003h,0003h,0007h,0763h,ffffh,
1497<6>[ 249.638717] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
1498<6>[ 249.668620] c0 0000h,0000h,0000h,0000h,0000h,0000h,0708h,0617h,
1499<6>[ 249.668688] c0 3efbh,4d0fh,fe62h,b8dah,0070h,3910h,b7bch,06d9h,
1500<6>[ 249.690123] c0
1501<6>[ 249.691693] c0 smb347_get_charging_state : 0x3dh(0x05)
1502<6>[ 249.691777] c0 BAT : soc(9), vcell(3675mV), curr(-60mA), avg curr(-61mA), temp(26.7), chg(1)
1503<6>[ 249.691874] c0 , full(0), rechg(0), lowbat(0), cable(1)
1504<6>[ 249.692126] c0 level = 9
1505<6>[ 249.840996] c3 level = 9
1506<7>[ 275.403447] c0 usb: enable_store enabled=0, !dev->enabled=0
1507<7>[ 275.403479] c0 usb: usb_gadget_disconnect
1508<7>[ 275.403563] c0 usb: usb_remove_config cdev->config= (null), config=c0cd6c1c
1509<7>[ 275.404125] c0 usb: android_work config= (null),connected=0,sw_connected=1
1510<6>[ 275.404193] c0 hidg_unbind: destroying device e946ea00
1511<7>[ 275.404516] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
1512<6>[ 275.404748] c0 hidg_unbind: destroying device e946ed00
1513<7>[ 275.453231] c0 usb: enable_store enabled=1, !dev->enabled=1
1514<7>[ 275.453262] c0 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
1515<7>[ 275.453295] c0 ,Class=0,SubClass=0,Protocol=0
1516<7>[ 275.453318] c0 usb: enable_store next cmd : usb_add_config
1517<7>[ 275.453348] c0 usb: android_bind_enabled_functions f:rndis
1518<4>[ 275.453401] c0 android_usb gadget: using random self ethernet address
1519<4>[ 275.453438] c0 android_usb gadget: using random host ethernet address
1520<6>[ 275.457573] c0 rndis0: MAC 9e:f1:89:3c:b7:aa
1521<6>[ 275.457606] c0 rndis0: HOST MAC aa:f8:56:da:ae:9a
1522<7>[ 275.457646] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=1
1523<7>[ 275.457689] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=2
1524<7>[ 275.457733] c0 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=3
1525<7>[ 275.457790] c0 usb: android_bind_enabled_functions f:mass_storage
1526<7>[ 275.457839] c0 usb: android_bind_enabled_functions f:hid
1527<6>[ 275.457874] c0 hid keyboard
1528<6>[ 275.457899] c0 hidg_bind: creating device e9423b00
1529<6>[ 275.458456] c0 hid mouse
1530<6>[ 275.458484] c0 hidg_bind: creating device e9423c00
1531<7>[ 275.458966] c0 usb: usb_gadget_connect
1532<7>[ 275.875746] c0 usb: GET_DES
1533<7>[ 275.875896] c0 usb: android_work config= (null),connected=1,sw_connected=0
1534<7>[ 275.877003] c0 usb: android_work sent uevent USB_STATE=CONNECTED
1535<7>[ 275.971893] c0 usb: enable_store enabled=0, !dev->enabled=0
1536<7>[ 275.971985] c0 usb: usb_gadget_disconnect
1537<7>[ 275.972115] c0 usb: usb_remove_config cdev->config= (null), config=c0cd6c1c
1538<6>[ 275.972244] c0 hidg_unbind: destroying device e9423b00
1539<7>[ 275.972806] c0 usb: android_work config= (null),connected=0,sw_connected=1
1540<6>[ 275.973809] c0 hidg_unbind: destroying device e9423c00
1541<7>[ 275.974595] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
1542<7>[ 276.063860] c1 usb: functions_store buff=rndis
1543<7>[ 276.063890] c1 usb: android_enable_function name=rndis
1544<7>[ 276.063916] c1 usb: android_enable_function name=hid
1545<7>[ 276.064108] c1 usb: enable_store enabled=1, !dev->enabled=1
1546<7>[ 276.064139] c1 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
1547<7>[ 276.064170] c1 ,Class=0,SubClass=0,Protocol=0
1548<7>[ 276.064191] c1 usb: enable_store next cmd : usb_add_config
1549<7>[ 276.064218] c1 usb: android_bind_enabled_functions f:rndis
1550<4>[ 276.064266] c1 android_usb gadget: using random self ethernet address
1551<4>[ 276.064300] c1 android_usb gadget: using random host ethernet address
1552<6>[ 276.067929] c1 rndis0: MAC 6a:a0:2d:39:f3:4c
1553<6>[ 276.067959] c1 rndis0: HOST MAC d6:32:96:b1:82:69
1554<7>[ 276.067998] c1 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=1
1555<7>[ 276.068041] c1 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=2
1556<7>[ 276.068081] c1 usb: usb_string_id cdev(0xe93a76c0)->next_string_id=3
1557<7>[ 276.068134] c1 usb: android_bind_enabled_functions f:hid
1558<6>[ 276.068166] c1 hid keyboard
1559<6>[ 276.068190] c1 hidg_bind: creating device e9085d00
1560<6>[ 276.068752] c1 hid mouse
1561<6>[ 276.068775] c1 hidg_bind: creating device e9085b00
1562<7>[ 276.069394] c1 usb: usb_gadget_connect
1563<0>[ 276.079121] c3 Kernel panic - not syncing: Attempted to kill init!
1564<4>[ 276.079164] c3 Backtrace:
1565<4>[ 276.079210] c3 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
1566<4>[ 276.079265] c3 r7:e901a000 r6:c03882c0 r5:c08387ac r4:c0d2f0c0
1567<4>[ 276.079327] c3 [<c0838064>] (dump_stack+0x0/0x24) from [<c0838658>] (panic+0xb8/0x20c)
1568<4>[ 276.079395] c3 [<c08385a0>] (panic+0x0/0x20c) from [<c00a8da0>] (complete_and_exit+0x0/0x2c)
1569<4>[ 276.079449] c3 r3:c08385a0 r2:e902bf18 r1:00000000 r0:c09f8d94
1570<4>[ 276.079494] c3 r7:e901a000
1571<4>[ 276.079526] c3 [<c00a841c>] (do_exit+0x0/0x984) from [<c00a8e2c>] (do_group_exit+0x48/0xe4)
1572<4>[ 276.079583] c3 r7:000000f8
1573<4>[ 276.079619] c3 [<c00a8de4>] (do_group_exit+0x0/0xe4) from [<c00a8ee0>] (__wake_up_parent+0x0/0x30)
1574<4>[ 276.079674] c3 r7:000000f8 r6:40107000 r5:00000004 r4:00000000
1575<4>[ 276.079729] c3 [<c00a8ec8>] (sys_exit_group+0x0/0x18) from [<c0058e40>] (ret_fast_syscall+0x0/0x30)
1576<2>[ 276.079816] c2 CPU2: stopping
1577<4>[ 276.079833] c2 Backtrace:
1578<4>[ 276.079858] c2 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
1579<4>[ 276.079896] c2 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000002
1580<4>[ 276.079936] c2 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
1581<4>[ 276.079977] c2 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
1582<4>[ 276.080014] c2 Exception stack(0xc3fefd68 to 0xc3fefdb0)
1583<4>[ 276.080044] c2 fd60: 00000000 0000003d 00000400 0000003d e55fb3a8 e55fb3a4
1584<4>[ 276.080086] c2 fd80: bf0e559f e54d8e18 c3fefe70 000e9000 000ed000 c3fefe5c c3fefdb0 c3fefdb0
1585<4>[ 276.080124] c2 fda0: c013291c c0132810 a0000013 ffffffff
1586<4>[ 276.080158] c2 [<c013255c>] (unmap_vmas+0x0/0x7c4) from [<c01395c0>] (exit_mmap+0x170/0x2cc)
1587<4>[ 276.080201] c2 [<c0139450>] (exit_mmap+0x0/0x2cc) from [<c00a0e74>] (mmput+0x68/0x130)
1588<4>[ 276.080236] c2 r8:e551237c r7:c08436d8 r6:e5512390 r5:00000000 r4:e5512340
1589<4>[ 276.080282] c2 [<c00a0e0c>] (mmput+0x0/0x130) from [<c00a812c>] (exit_mm+0x19c/0x1ec)
1590<4>[ 276.080318] c2 r6:e562ce14 r5:e5512340 r4:e562ca00 r3:c00a0e0c
1591<4>[ 276.080356] c2 [<c00a7f90>] (exit_mm+0x0/0x1ec) from [<c00a8af8>] (do_exit+0x6dc/0x984)
1592<4>[ 276.080392] c2 r9:00000042 r8:00000040 r7:e55d5980 r6:e5512340 r5:c012fe00
1593<4>[ 276.080430] c2 r4:00000100
1594<4>[ 276.080450] c2 [<c00a841c>] (do_exit+0x0/0x984) from [<c00a8e2c>] (do_group_exit+0x48/0xe4)
1595<4>[ 276.080487] c2 r7:000000f8
1596<4>[ 276.080508] c2 [<c00a8de4>] (do_group_exit+0x0/0xe4) from [<c00a8ee0>] (__wake_up_parent+0x0/0x30)
1597<4>[ 276.080551] c2 r7:000000f8 r6:bee15ec4 r5:0000006d r4:00000001
1598<4>[ 276.080589] c2 [<c00a8ec8>] (sys_exit_group+0x0/0x18) from [<c0058e40>] (ret_fast_syscall+0x0/0x30)
1599<2>[ 276.080629] c1 CPU1: stopping
1600<4>[ 276.080646] c1 Backtrace:
1601<4>[ 276.080672] c1 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
1602<4>[ 276.080710] c1 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000001
1603<4>[ 276.080750] c1 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
1604<4>[ 276.080791] c1 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
1605<4>[ 276.080830] c1 Exception stack(0xdb8bbd50 to 0xdb8bbd98)
1606<4>[ 276.080857] c1 bd40: e9765420 000b6000 c0c90b04 c0d46cc0
1607<4>[ 276.080899] c1 bd60: 000bf0b2 db9762d8 bf0b259f e9765420 db8bbe70 000b6000 000ed000 db8bbdac
1608<4>[ 276.080938] c1 bd80: 0006afea db8bbd98 c0132890 c01313f8 80000013 ffffffff
1609<4>[ 276.080975] c1 [<c01313a0>] (vm_normal_page+0x0/0xcc) from [<c0132890>] (unmap_vmas+0x334/0x7c4)
1610<4>[ 276.081014] c1 r5:db9762d8 r4:db9762dc
1611<4>[ 276.081041] c1 [<c013255c>] (unmap_vmas+0x0/0x7c4) from [<c01395c0>] (exit_mmap+0x170/0x2cc)
1612<4>[ 276.081087] c1 [<c0139450>] (exit_mmap+0x0/0x2cc) from [<c00a0e74>] (mmput+0x68/0x130)
1613<4>[ 276.081122] c1 r8:e553a6bc r7:c08436d8 r6:e553a6d0 r5:00000000 r4:e553a680
1614<4>[ 276.081165] c1 [<c00a0e0c>] (mmput+0x0/0x130) from [<c00a812c>] (exit_mm+0x19c/0x1ec)
1615<4>[ 276.081201] c1 r6:e911fe14 r5:e553a680 r4:e911fa00 r3:c00a0e0c
1616<4>[ 276.081238] c1 [<c00a7f90>] (exit_mm+0x0/0x1ec) from [<c00a8af8>] (do_exit+0x6dc/0x984)
1617<4>[ 276.081274] c1 r9:00000042 r8:00000040 r7:e95224c0 r6:e553a680 r5:c012fe00
1618<4>[ 276.081313] c1 r4:00000100
1619<4>[ 276.081335] c1 [<c00a841c>] (do_exit+0x0/0x984) from [<c00a8e2c>] (do_group_exit+0x48/0xe4)
1620<4>[ 276.081371] c1 r7:000000f8
1621<4>[ 276.081392] c1 [<c00a8de4>] (do_group_exit+0x0/0xe4) from [<c00a8ee0>] (__wake_up_parent+0x0/0x30)
1622<4>[ 276.081432] c1 r7:000000f8 r6:beebeec4 r5:0000006d r4:00000001
1623<4>[ 276.081469] c1 [<c00a8ec8>] (sys_exit_group+0x0/0x18) from [<c0058e40>] (ret_fast_syscall+0x0/0x30)
1624<2>[ 276.081510] c0 CPU0: stopping
1625<4>[ 276.081527] c0 Backtrace:
1626<4>[ 276.081553] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
1627<4>[ 276.081596] c0 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000000
1628<4>[ 276.081635] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
1629<4>[ 276.081675] c0 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
1630<4>[ 276.081712] c0 Exception stack(0xc3fe3e60 to 0xc3fe3ea8)
1631<4>[ 276.081740] c0 3e60: 000f601f 000f6000 e916ea50 0000001f 000f5000 000f6000 00000380 c0067bbc
1632<4>[ 276.081781] c0 3e80: e562a3d4 000f6000 dba70008 c3fe3ecc 00000000 c3fe3ea8 c005f49c c0067ac4
1633<4>[ 276.081819] c0 3ea0: 20000013 ffffffff
1634<4>[ 276.081849] c0 [<c005f414>] (flush_tlb_range+0x0/0x90) from [<c013a334>] (mprotect_fixup+0x3e4/0x4dc)
1635<4>[ 276.081889] c0 r4:00007bd4
1636<4>[ 276.081911] c0 [<c0139f50>] (mprotect_fixup+0x0/0x4dc) from [<c013a558>] (sys_mprotect+0x12c/0x228)
1637<4>[ 276.081955] c0 [<c013a42c>] (sys_mprotect+0x0/0x228) from [<c0058e40>] (ret_fast_syscall+0x0/0x30)
1638<6>[ 276.082001] c3 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
1639<0>[ 276.082036] c3 Rebooting in 5 seconds..
1640<0>[ 278.570728] c3 sec_reboot (104, emergency)
1641
1642Samsung S-Boot 4.0 for GT-N8000 (May 18 2014 - 14:58:54)
1643
1644EXYNOS4412(EVT 1.1) / 2044MB / 0MB / Rev 6 / N8000XXUDNE4 /(PKG_ID 0x904f018)
1645
1646BOOTLOADER VERSION : N8000XXUDNE4
1647
1648BUCK1OUT(vdd_mif) = 0x06
1649BUCK3DVS1(vdd_int) = 0x28
1650cardtype: 0x00000007
1651SB_MMC_HS_52MHZ_1_8V_3V_IO
1652mmc->card_caps: 0x00000311
1653mmc->host_caps: 0x00000311
1654[mmc] capacity = 30777344
1655Current SBOOT version : VERSION_-+A2
1656- read_bl1
1657pit_check_signature (PIT) valid.
1658initialize_ddi_data: usable! (19:0xf)
1659[RPMB] emmc_rpmb_open:
1660Get DATA success.
1661[RPMB] emmc_rpmb_close:
1662initialize_rpmb_data: usable! (GT-N8000:VERSION_-+A2)
1663PARAM ENV VERSION: v1.0..
1664set_charger_state: charger disabled
1665fuel_gauge_read_vfsoc : VFSOC(6), data(0x06d9)
1666fuel_gauge_read_soc : SOC(9), data(0x0956)
1667init_fuelgauge: before: FCap(7064), RemCap(660), VFSOC(6), RepSOC(9)
1668init_fuelgauge: jig(0), dcin(1)
1669init_fuelgauge: CGAIN(0x377e)
1670check_battery_type: temper: fg(26), adc(26)
1671check_battery_type: SDI type
1672init_fuelgauge: not jiged state, DesignCap(0x4996)
1673set_fuel_gauge_parameter: battery_type = 1
1674init_fuelgauge: already initialized, SDI type
1675init_fuelgauge: bypass VFSOC_Patch, jig(0), dcin(1)
1676init_fuelgauge: bypass SOC compensation, jig(0), dcin(1)
1677check_temperture: temper: fg(26.7), adc(26)
1678fuel_gauge_read_vfsoc : VFSOC(6), data(0x06d9)
1679fuel_gauge_read_soc : SOC(9), data(0x0956)
1680init_fuelgauge: after: FCap(7064), RemCap(660), VFSOC(6), RepSOC(9)
1681set_charger_state: charger enabled
1682init_stmpe811
1683board_chipset_init: chargable state
1684get_stmpe811_adc: ch6: 0x0, 0
1685get_stmpe811_adc: ch6: 0x0, 0
1686get_stmpe811_adc: ch6: 0x0, 0
1687get_cable_type: avg adc: 0
1688get_cable_type: USB
1689set_chargcurr_high: smb347: set charge current as LOW(500mA)
1690set_charger_state: charger enabled
1691PMIC_ID = 0x02
1692PMIC_IRQSRC = 0x00
1693PMIC_IRQ1 = 0x41
1694PMIC_IRQ2 = 0x00
1695PMIC_IRQ1M = 0xff
1696PMIC_IRQ2M = 0xff
1697PMIC_STATUS1 = 0x16
1698PMIC_STATUS2 = 0x00
1699PMIC_PWRON = 0x09
1700PMIC_RTCINT = 0x11
1701PMIC_RTCINTM = 0x3f
1702s5p_check_keypad: 0x0
1703s5p_check_reboot_mode: INFORM3 = 0 ... skip
1704
1705
1706 Reserved secure RAM : 3145728
1707
1708s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
1709s5p_check_upload: debug level is 4f4c!
1710s5p_check_upload: level low or unknown: skip 0
1711s5p_check_download: 0
1712check_pm_status: acokb(0), dcinok(1), ta(1), jig(0)
1713check_pm_status: normal reset, do not enter LPM mode
1714scr_draw_image: draw 'logo.jpg'...
1715read 'logo.jpg'(52956) completed.
1716cmu_div:11, div:1, src_clk:800000000, pixel_clk:66663000
1717check_lcdtype : adc=2968, lctype=2
1718<start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
1719<start_checksum:483>offset:50, size:6296
1720<start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:16
1721Not Need Movinand Checksum
1722Movinand Checksum Confirmation Pass
1723[mobi_drv] add: 0x43e50fa0, size: 3933
1724MobiCore INIT response = 0
1725MobiCore RTM has initialized!
1726MobiCore IDLE flag = 0
1727MobiCore driver address 43e50fa0, size = 3933
1728MobiCore RTM Notified back!
1729MobiCore Driver loaded and RTM IDLE!
1730MobiCore RTM has been uninitialized!
1731load_kernel: loading boot image from 81920..
1732Verify_Binary_Signature: failed.
1733pit_check_signature (BOOT) invalid.
1734Set invalid sign flag
1735 No need to update kernel type.
1736
1737SMC Num = 0x83000001
1738
1739mobismc success!!! [ret = 0]
1740[s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A2, rpmb_version:VERSION_-+A2
1741rpmb_version:50, cur_version:50
1742ATAG_CORE: 5 54410001 0 0 0
1743ATAG_MEM: 4 54410002 20000000 40000000
1744ATAG_MEM: 4 54410002 20000000 60000000
1745ATAG_MEM: 4 54410002 20000000 80000000
1746ATAG_MEM: 4 54410002 1FC00000 A0000000
1747ATAG_SERIAL: 4 54410006 4dfc3d39 868641fb
1748ATAG_INITRD2: 4 54420005 42000000 3d8749
1749ATAG_REVISION: 3 54410007 6
1750ATAG_CMDLINE: a6 54410009 'console=ttySAC2,115200 loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2 consoleblank=0 lpj=3981312 vmalloc=256m oops=panic pmic_info=1 cordon=c05378389fc8b5213aa72d5c96565c38 connie=GT-N8000_OPEN_EUR_1b63db8bedfeb303294113b436ce3952 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N8000XXUDNE4 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4dfc3d39868641fb snd_soc_core.pmdown_time=1000'
1751ATAG_NONE: 0 0
1752
1753Starting kernel at 0x40008000...
1754
1755switch_init: uart_sel(0)
1756<6>[ 0.000000] c0 Initializing cgroup subsys cpuset
1757<6>[ 0.000000] c0 Initializing cgroup subsys cpu
1758<5>[ 0.000000] c0 Linux version 3.0.101-HTML6405-N8000 (office@mhs-solutions.at) (gcc version 4.8 (GCC) ) #7 SMP PREEMPT Wed Nov 6 10:05:24 CET 2019
1759<4>[ 0.000000] c0 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
1760<4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
1761<4>[ 0.000000] c0 Machine: SMDK4x12
1762<6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 6b000000
1763<6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
1764<4>[ 0.000000] c0 CPU EXYNOS4412 (id 0xe4412211)
1765<7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
1766<6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
1767<3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
1768<3>[ 0.000000] c0 audiocdclk: no parent clock specified
1769<3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
1770<7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
1771<7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
1772<6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
1773<6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
1774<6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
1775<6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
1776<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
1777<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
1778<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
1779<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
1780<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
1781<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
1782<6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
1783<6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
1784<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
1785<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
1786<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
1787<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
1788<6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 66666666
1789<6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
1790<6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 66666666
1791<6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
1792<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
1793<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
1794<6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
1795<6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
1796<6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
1797<6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
1798<6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
1799<6>[ 0.000000] c0 S5P/CMA: Reserved 0x68000000/0x00c00000 for 'fimc_is'
1800<6>[ 0.000000] c0 S5P/CMA: Reserved 0x6a700000/0x00800000 for 'fimd'
1801<6>[ 0.000000] c0 S5P/CMA: Reserved 0x69b00000/0x00c00000 for 'fimc0'
1802<6>[ 0.000000] c0 S5P/CMA: Reserved 0x69a00000/0x00100000 for 'srp'
1803<6>[ 0.000000] c0 S5P/CMA: Reserved 0x65c00000/0x01810000 for 'fimc1'
1804<6>[ 0.000000] c0 S5P/CMA: Reserved 0x64000000/0x00a00000 for 'mfc-normal'
1805<6>[ 0.000000] c0 S5P/CMA: Reserving 0x8000000 for secure region aligned by 0x4000000.
1806<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5c000000/0x00200000 for 'sectbl'
1807<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5c200000/0x02e00000 for 'mfc-secure'
1808<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5f000000/0x05000000 for 'ion'
1809<0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
1810<0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
1811<7>[ 0.000000] c0 On node 0 totalpages: 523264
1812<7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0d18020, node_mem_map c0d7c000
1813<7>[ 0.000000] c0 Normal zone: 1584 pages used for memmap
1814<7>[ 0.000000] c0 Normal zone: 0 pages reserved
1815<7>[ 0.000000] c0 Normal zone: 178640 pages, LIFO batch:31
1816<7>[ 0.000000] c0 HighMem zone: 3015 pages used for memmap
1817<7>[ 0.000000] c0 HighMem zone: 340025 pages, LIFO batch:31
1818<6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
1819<6>[ 0.000000] c0 PERCPU: Embedded 8 pages/cpu @c1f8b000 s9184 r8192 d15392 u32768
1820<7>[ 0.000000] c0 pcpu-alloc: s9184 r8192 d15392 u32768 alloc=8*4096
1821<7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
1822<6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 518665
1823<5>[ 0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 console=ttySAC2,115200 loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2 consoleblank=0 lpj=3981312 vmalloc=256m oops=panic pmic_info=1 cordon=c05378389fc8b5213aa72d5c96565c38 connie=GT-N8000_OPEN_EUR_1b63db8bedfeb303294113b436ce3952 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N8000XXUDNE4 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4dfc3d39868641fb snd_soc_core.pmdown_time=1000
1824<6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:1c38c sec_log_buf:fd200000 sec_log_size:2097152
1825<6>[ 0.000000] c0 sec_log_save_old: saved old log at 115596@c1fab180
1826<6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
1827<6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
1828<6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
1829<6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
1830<6>[ 0.000000] c0 allocated 8372224 bytes of page_cgroup
1831<6>[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
1832<6>[ 0.000000] c0 Memory: 2044MB = 2044MB total
1833<5>[ 0.000000] c0 Memory: 1829356k/1829356k available, 263700k reserved, 1372160K highmem
1834<5>[ 0.000000] c0 Virtual kernel memory layout:
1835<5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
1836<5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
1837<5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
1838<5>[ 0.000000] c0 vmalloc : 0xec800000 - 0xfc000000 ( 248 MB)
1839<5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
1840<5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
1841<5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
1842<5>[ 0.000000] c0 .init : 0xc0008000 - 0xc0052000 ( 296 kB)
1843<5>[ 0.000000] c0 .text : 0xc0052000 - 0xc0ad0000 (10744 kB)
1844<5>[ 0.000000] c0 .data : 0xc0ad0000 - 0xc0d2c2a0 (2417 kB)
1845<5>[ 0.000000] c0 .bss : 0xc0d2c2c4 - 0xc0d7b938 ( 318 kB)
1846<6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
1847<6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
1848<6>[ 0.000000] c0 NR_IRQS:501
1849<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
1850<6>[ 0.000000] c0 Console: colour dummy device 80x30
1851<6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 796.26 BogoMIPS (lpj=3981312)
1852<6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
1853<6>[ 0.000000] c0 Security Framework initialized
1854<6>[ 0.000000] c0 AppArmor: AppArmor initialized
1855<6>[ 0.000000] c0 Mount-cache hash table entries: 512
1856<6>[ 0.000000] c0 Initializing cgroup subsys debug
1857<6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
1858<6>[ 0.000000] c0 Initializing cgroup subsys memory
1859<6>[ 0.000000] c0 Initializing cgroup subsys devices
1860<6>[ 0.000000] c0 Initializing cgroup subsys freezer
1861<6>[ 0.000000] c0 Initializing cgroup subsys blkio
1862<6>[ 0.000000] c0 Initializing cgroup subsys perf_event
1863<6>[ 0.000000] c0 Initializing cgroup subsys bfqio
1864<6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
1865<6>[ 0.000000] c0 CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
1866<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
1867<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
1868<6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
1869<6>[ 0.000000] c0 L310 cache controller enabled
1870<6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
1871<4>[ 0.060000] c1 CPU1: Booted secondary processor
1872<4>[ 0.060000] c1 CPU1: Booted secondary processor
1873<6>[ 0.060000] c1 CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
1874<6>[ 0.060000] c1 notifier_call_chain : NOTIFY BAD tick_notify
1875<4>[ 0.120000] c2 CPU2: Booted secondary processor
1876<4>[ 0.120000] c2 CPU2: Booted secondary processor
1877<6>[ 0.120000] c2 CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
1878<6>[ 0.120000] c2 notifier_call_chain : NOTIFY BAD tick_notify
1879<4>[ 0.180000] c3 CPU3: Booted secondary processor
1880<4>[ 0.180000] c3 CPU3: Booted secondary processor
1881<6>[ 0.180000] c3 CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
1882<6>[ 0.180000] c3 notifier_call_chain : NOTIFY BAD tick_notify
1883<6>[ 0.200000] c0 Brought up 4 CPUs
1884<6>[ 0.200000] c0 SMP: Total of 4 processors activated (3185.04 BogoMIPS).
1885<6>[ 0.200000] c0 devtmpfs: initialized
1886<3>[ 0.200000] c0 gpio: GPK0 has missing PM functions
1887<6>[ 0.200000] c0 print_constraints: dummy:
1888<6>[ 0.210000] c0 NET: Registered protocol family 16
1889<7>[ 0.210000] c0 migrating range 6b000 6b280, retry (0)
1890<6>[ 0.260000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
1891<6>[ 0.260000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
1892<6>[ 0.260000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
1893<7>[ 0.260000] c0 midas_config_gpio_table
1894<6>[ 0.260000] c0 midas_power_init
1895<7>[ 0.260000] c0 [TSP] p4_tsp_init rev : 6
1896<7>[ 0.260000] c0 [TSP] TSP IC : Atmel
1897<6>[ 0.270000] c0 Registered chained gpio int handler for interrupt 110.
1898<6>[ 0.270000] c0 Registered interrupt support for gpio group 25.
1899<6>[ 0.270000] c0 Registered chained gpio int handler for interrupt 111.
1900<6>[ 0.270000] c0 Registered interrupt support for gpio group 4.
1901<6>[ 0.270000] c0 Sound: start midas_sound_init
1902<6>[ 0.270000] c0 midas_machine_init() register sii9234 driver
1903<7>[ 0.270000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=2
1904<6>[ 0.270000] c0 cam_cfg_init
1905<4>[ 0.270000] c0 brcm_wlan_init: start
1906<4>[ 0.270000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
1907<4>[ 0.270000] c0 -----------------------------------------------------
1908<4>[ 0.270000] c0 -----------------------------------------------------
1909<4>[ 0.270000] c0 -----------------------------------------------------
1910<4>[ 0.270000] c0 regist ret:0
1911<3>[ 0.270000] c0 ram_console: invalid start 0 or end 0
1912<6>[ 0.280000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
1913<6>[ 0.280000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
1914<6>[ 0.280000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
1915<6>[ 0.280000] c0 exynos4_pmu_init: PMU supports 4412(96)
1916<6>[ 0.280000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
1917<6>[ 0.280000] c0 EXYNOS4: Initializing architecture
1918<4>[ 0.280000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
1919<6>[ 0.280000] c0 s3c-adc samsung-adc-v4: attached adc driver
1920<6>[ 0.280000] c0 samsung-pd samsung-pd.0: power domain registered
1921<6>[ 0.280000] c0 samsung-pd samsung-pd.1: power domain registered
1922<6>[ 0.280000] c0 samsung-pd samsung-pd.2: power domain registered
1923<6>[ 0.280000] c0 lcd0 disable skip only one time
1924<6>[ 0.280000] c0 samsung-pd samsung-pd.5: power domain registered
1925<6>[ 0.280000] c0 samsung-pd samsung-pd.4: power domain registered
1926<6>[ 0.280000] c0 samsung-pd samsung-pd.6: power domain registered
1927<6>[ 0.280000] c0 samsung-pd samsung-pd.8: power domain registered
1928<6>[ 0.280000] c0 samsung-pd samsung-pd.7: power domain registered
1929<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
1930<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
1931<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
1932<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
1933<6>[ 0.280000] c0 Switching to clocksource mct-frc
1934<6>[ 0.280817] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
1935<6>[ 0.280926] c0 Switched to NOHz mode on CPU #0
1936<6>[ 0.280976] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
1937<6>[ 0.281068] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
1938<6>[ 0.281157] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
1939<6>[ 0.281238] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
1940<6>[ 0.281321] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
1941<6>[ 0.281361] c2 Switched to NOHz mode on CPU #2
1942<6>[ 0.281389] c3 Switched to NOHz mode on CPU #3
1943<6>[ 0.281420] c1 Switched to NOHz mode on CPU #1
1944<6>[ 0.281500] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
1945<6>[ 0.281588] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
1946<6>[ 0.281672] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
1947<6>[ 0.281742] c0 s5p-sysmmu s5p-sysmmu.16: Initialized for exynos4-fimc-is.
1948<6>[ 0.281817] c0 s5p-sysmmu s5p-sysmmu.17: Initialized for exynos4-fimc-is.
1949<6>[ 0.281893] c0 s5p-sysmmu s5p-sysmmu.18: Initialized for exynos4-fimc-is.
1950<6>[ 0.281973] c0 s5p-sysmmu s5p-sysmmu.19: Initialized for exynos4-fimc-is.
1951<6>[ 0.320108] c0 bio: create slab <bio-0> at 0
1952<6>[ 0.320897] c0 print_constraints: VBATT: 5000 mV
1953<7>[ 0.321160] c0 max77686_pmic_init
1954<5>[ 0.322850] c0 SCSI subsystem initialized
1955<6>[ 0.323213] c0 usbcore: registered new interface driver usbfs
1956<6>[ 0.323561] c0 usbcore: registered new interface driver hub
1957<6>[ 0.323820] c0 usbcore: registered new device driver usb
1958<6>[ 0.324513] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
1959<6>[ 0.324924] c0 i2c-gpio i2c-gpio.13: using pins 266 (SDA) and 267 (SCL)
1960<6>[ 0.325338] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
1961<6>[ 0.325602] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
1962<6>[ 0.325840] c0 i2c-gpio i2c-gpio.16: using pins 91 (SDA) and 89 (SCL)
1963<6>[ 0.326249] c0 i2c-gpio i2c-gpio.17: using pins 258 (SDA) and 259 (SCL)
1964<6>[ 0.326683] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
1965<6>[ 0.327121] c0 i2c-gpio i2c-gpio.19: using pins 282 (SDA) and 281 (SCL)
1966<6>[ 0.327368] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
1967<6>[ 0.327889] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
1968<6>[ 0.328200] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
1969<6>[ 0.328661] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
1970<6>[ 0.329124] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
1971<6>[ 0.329603] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
1972<6>[ 0.330260] c0 max77686 7-0009: device found
1973<6>[ 0.330477] c0 max77686_irq_init+
1974<6>[ 0.330507] c0 max77686_irq_init: gpio_irq=1
1975<6>[ 0.336298] c0 max77686_irq_init-
1976<7>[ 0.336579] c0 max77686_pmic_probe
1977<7>[ 0.337497] c0 max77686_pmic_probe: DEVICE ID=0x2
1978<6>[ 0.340735] c0 print_constraints: vdd_mif range: 850 <--> 1050 mV at 1000 mV
1979<6>[ 0.341433] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
1980<6>[ 0.342111] c0 print_constraints: vdd_int range: 850 <--> 1100 mV at 1000 mV
1981<6>[ 0.342804] c0 print_constraints: vdd_g3d range: 850 <--> 1075 mV at 1000 mV
1982<6>[ 0.343072] c0 print_constraints: 3MP_CORE_1.2V: 1200 mV
1983<6>[ 0.343993] c0 print_constraints: VCC_1.8V_AP: 1800 mV
1984<6>[ 0.344647] c0 print_constraints: VCC_1.8V_IO: 1800 mV
1985<6>[ 0.345537] c0 print_constraints: VMIPI_1.0V: 1000 mV
1986<6>[ 0.346440] c0 print_constraints: VLED_IC_1.9V: 1950 mV
1987<6>[ 0.347365] c0 print_constraints: VMIPI_1.8V: 1800 mV
1988<6>[ 0.348272] c0 print_constraints: VABB1_1.9V: 1950 mV
1989<6>[ 0.349171] c0 print_constraints: VUOTG_3.0V: 3000 mV
1990<6>[ 0.350068] c0 print_constraints: VABB2_1.9V: 1950 mV
1991<6>[ 0.350733] c0 print_constraints: CAM_IO_1.8V: 1800 mV
1992<6>[ 0.351379] c0 print_constraints: VT_CORE_1.8V: 1800 mV
1993<6>[ 0.352026] c0 print_constraints: VTF_2.8V: 2800 mV
1994<6>[ 0.352927] c0 print_constraints: VDD_ADC_3.3V: 3300 mV
1995<6>[ 0.353583] c0 print_constraints: CAM_A2.8V: 2800 mV
1996<6>[ 0.354238] c0 print_constraints: VLED_3.3V: 3300 mV
1997<6>[ 0.354893] c0 print_constraints: 3MP_AF_2.8V: 2800 mV
1998<6>[ 0.355414] c0 print_constraints: 32KHZ_PMIC:
1999<6>[ 0.355749] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
2000<3>[ 0.356358] c0 max77686 5-0009: device not found on this channel (this is not an error)
2001<6>[ 0.356417] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
2002<6>[ 0.356758] c0 fg_i2c_probe: fuelgauge driver loading
2003<6>[ 0.356789] c0 Fuel gauge attach success!!!
2004<6>[ 0.357193] c0 fg_set_battery_type: DesignCAP(0x4996), Battery type(SDI)
2005<6>[ 0.359075] c0 fg_read_soc: soc(9), psoc(933), vfsoc(6)
2006<6>[ 0.413046] c0 [FG_Model]
2007<6>[ 0.420670] c0 0x7df0,
2008<6>[ 0.420688] c0 0xb500,
2009<6>[ 0.420705] c0 0xb860,
2010<6>[ 0.420722] c0 0xb930,
2011<6>[ 0.420739] c0 0xb980,
2012<6>[ 0.420756] c0 0xbb70,
2013<6>[ 0.420773] c0 0xbc00,
2014<6>[ 0.420789] c0 0xbc70,
2015<6>[ 0.420806] c0 0xbd20,
2016<6>[ 0.420822] c0 0xbdb0,
2017<6>[ 0.420839] c0 0xbef0,
2018<6>[ 0.420855] c0 0xc140,
2019<6>[ 0.420872] c0 0xc3c0,
2020<6>[ 0.420889] c0 0xc6e0,
2021<6>[ 0.420906] c0 0xcd20,
2022<6>[ 0.420922] c0 0xd100,
2023<6>[ 0.420939] c0 0x0020,
2024<6>[ 0.420955] c0 0x0340,
2025<6>[ 0.420972] c0 0x15d0,
2026<6>[ 0.420988] c0 0x2dd0,
2027<6>[ 0.421005] c0 0x0600,
2028<6>[ 0.421022] c0 0x18f0,
2029<6>[ 0.421039] c0 0x25a0,
2030<6>[ 0.421055] c0 0x1800,
2031<6>[ 0.421072] c0 0x22a0,
2032<6>[ 0.421088] c0 0x1670,
2033<6>[ 0.421105] c0 0x09a0,
2034<6>[ 0.421121] c0 0x08c0,
2035<6>[ 0.421138] c0 0x0b30,
2036<6>[ 0.421155] c0 0x04f0,
2037<6>[ 0.421172] c0 0x0870,
2038<6>[ 0.421188] c0 0x0870,
2039<6>[ 0.421205] c0 0x0200,
2040<6>[ 0.421221] c0 0x0200,
2041<6>[ 0.421238] c0 0x0200,
2042<6>[ 0.421255] c0 0x0200,
2043<6>[ 0.421271] c0 0x0200,
2044<6>[ 0.421288] c0 0x0200,
2045<6>[ 0.421305] c0 0x0200,
2046<6>[ 0.421321] c0 0x0200,
2047<6>[ 0.421338] c0 0x0200,
2048<6>[ 0.421354] c0 0x0200,
2049<6>[ 0.421371] c0 0x0200,
2050<6>[ 0.421388] c0 0x0200,
2051<6>[ 0.421405] c0 0x0200,
2052<6>[ 0.421422] c0 0x0200,
2053<6>[ 0.421438] c0 0x0200,
2054<6>[ 0.421455] c0 0x0200
2055<6>[ 0.429067] c0 [MAX17042] 1/1/1970 00:00,
2056<6>[ 0.435023] c0 0000h,ff00h,7f80h,ff01h,0000h,0528h,0956h,4ae7h,
2057<6>[ 0.435053] c0 1ad4h,b712h,fcbfh,fcefh,000eh,0704h,094ah,052eh,
2058<6>[ 0.465986] c0 3730h,0d5eh,7d5ah,0000h,0318h,0148h,1ac1h,00a9h,
2059<6>[ 0.466016] c0 4996h,b78ah,2114h,c87bh,2ed6h,2214h,0600h,0520h,
2060<6>[ 0.495961] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7dd0h,
2061<6>[ 0.495991] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
2062<6>[ 0.525958] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
2063<6>[ 0.525987] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,65b6h,e000h,
2064<6>[ 0.555963] c0 1800h,b810h,f723h,8500h,b77bh,12eah,337eh,ffa9h,
2065<6>[ 0.555993] c0 0787h,b6c2h,050dh,1a00h,054dh,0522h,77aah,5d6dh,
2066<6>[ 0.585956] c0 0c47h,0a2bh,0001h,167dh,0003h,0007h,0763h,ffffh,
2067<6>[ 0.585987] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
2068<6>[ 0.615947] c0 0000h,0000h,0000h,0000h,0000h,0000h,0704h,01ach,
2069<6>[ 0.615977] c0 3ee9h,4cbbh,fc91h,b8d9h,0070h,3910h,b6f4h,06d9h,
2070<6>[ 0.640044] c0
2071<6>[ 0.641134] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
2072<6>[ 0.642030] c0 Bluetooth: Core ver 2.16
2073<6>[ 0.642215] c0 NET: Registered protocol family 31
2074<6>[ 0.642245] c0 Bluetooth: HCI device and connection manager initialized
2075<6>[ 0.642287] c0 Bluetooth: HCI socket layer initialized
2076<6>[ 0.642318] c0 Bluetooth: L2CAP socket layer initialized
2077<6>[ 0.642367] c0 Bluetooth: SCO socket layer initialized
2078<6>[ 0.642860] c0 cfg80211: Calling CRDA to update world regulatory domain
2079<6>[ 0.643083] c0 NetLabel: Initializing
2080<6>[ 0.643110] c0 NetLabel: domain hash size = 128
2081<6>[ 0.643137] c0 NetLabel: protocols = UNLABELED CIPSOv4
2082<6>[ 0.643204] c0 NetLabel: unlabeled traffic allowed by default
2083<6>[ 0.643804] c0 AppArmor: AppArmor Filesystem Enabled
2084<6>[ 0.660385] c0 NET: Registered protocol family 2
2085<6>[ 0.660658] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
2086<6>[ 0.661518] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
2087<6>[ 0.663422] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
2088<6>[ 0.664445] c0 TCP: Hash tables configured (established 131072 bind 65536)
2089<6>[ 0.664484] c0 TCP reno registered
2090<6>[ 0.664511] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
2091<6>[ 0.664573] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
2092<6>[ 0.665024] c0 NET: Registered protocol family 1
2093<6>[ 0.665404] c0 RPC: Registered named UNIX socket transport module.
2094<6>[ 0.665441] c0 RPC: Registered udp transport module.
2095<6>[ 0.665471] c0 RPC: Registered tcp transport module.
2096<6>[ 0.665501] c0 RPC: Registered tcp NFSv4.1 backchannel transport module.
2097<6>[ 0.665707] c0 Trying to unpack rootfs image as initramfs...
2098<6>[ 0.907566] c0 Freeing initrd memory: 3936K
2099<6>[ 0.907702] c0 PMU: registered new PMU device of type 0
2100<6>[ 0.907972] c0 Exynos4 : ARM Clock down on idle mode is enabled
2101<6>[ 0.910156] c0 init_gpio: uart_sel(0)
2102<6>[ 0.910387] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
2103<6>[ 0.910597] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
2104<6>[ 0.910809] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
2105<6>[ 0.911017] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
2106<6>[ 0.911226] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
2107<7>[ 0.911835] c0 gps_bcm475x_init - system_rev : 6
2108<6>[ 0.911865] c0 accel_gpio_init
2109<6>[ 0.911890] c0 gyro_gpio_init
2110<6>[ 0.912092] c0 i2c 1-0019: i2c_add_devices - added lsm330dlc_accel successfully
2111<6>[ 0.912302] c0 i2c 1-006b: i2c_add_devices - added lsm330dlc_gyro successfully
2112<6>[ 0.912518] c0 i2c 9-0023: i2c_add_devices - added bh1721fvc successfully
2113<6>[ 0.912723] c0 i2c 9-001c: i2c_add_devices - added AL3201 successfully
2114<6>[ 0.912762] c0 ak8975c_gpio_init
2115<6>[ 0.912803] c0 Registered interrupt support for gpio group 27.
2116<6>[ 0.913016] c0 i2c 10-000c: i2c_add_devices - added ak8975 successfully
2117<6>[ 0.914096] c0 wake enabled for irq 374
2118<6>[ 0.914338] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
2119<7>[ 0.914889] c0 migrating range 6b280 6b281, retry (0)
2120<6>[ 0.939164] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
2121<6>[ 0.939200] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
2122<7>[ 0.939427] c0 migrating range 6b281 6b282, retry (0)
2123<6>[ 0.963456] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
2124<6>[ 0.963492] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
2125<7>[ 0.963710] c0 migrating range 6b282 6b283, retry (0)
2126<6>[ 0.987852] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
2127<6>[ 0.987889] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
2128<6>[ 0.988270] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2129<6>[ 0.988444] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2130<6>[ 0.988916] c0 futex hash table entries: 1024 (order: 3, 32768 bytes)
2131<4>[ 1.002161] c0 highmem bounce pool size: 64 pages
2132<6>[ 1.002555] c0 ashmem: initialized
2133<6>[ 1.015659] c0 exFAT: Core Version 1.2.19
2134<6>[ 1.015687] c0 exFAT: FS Version 1.2.19
2135<6>[ 1.019267] c0 fuse init (API version 7.16)
2136<6>[ 1.020292] c0 msgmni has been set to 932
2137<6>[ 1.020610] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2138<6>[ 1.020757] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2139<6>[ 1.020899] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2140<6>[ 1.021045] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2141<6>[ 1.021186] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2142<6>[ 1.021322] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2143<6>[ 1.021462] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2144<6>[ 1.021607] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2145<6>[ 1.021864] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2146<6>[ 1.022022] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2147<6>[ 1.022210] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2148<6>[ 1.022861] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2149<6>[ 1.023037] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2150<6>[ 1.023072] c2 FIPS: No test for stdrng (krng)
2151<6>[ 1.023127] c0 io scheduler noop registered
2152<6>[ 1.023155] c0 io scheduler deadline registered
2153<6>[ 1.023537] c0 io scheduler bfq registered
2154<6>[ 1.023594] c0 io scheduler row registered
2155<6>[ 1.023891] c0 io scheduler cfq registered (default)
2156<6>[ 1.023924] c0 io scheduler sio registered
2157<6>[ 1.023950] c0 io scheduler zen registered
2158<6>[ 1.024008] c0 io scheduler fiops registered
2159<6>[ 1.024036] c0 io scheduler tripndroid registered
2160<6>[ 1.024269] c0 s3cfb s3cfb.0: vclk=66663000, div=12(11), rate=72727272
2161<6>[ 1.024401] c0 set mdnie_pwm sclk rate to 2181818
2162<6>[ 1.024432] c0 set mdnie_pwm sclk rate to 12000000
2163<6>[ 1.024466] c0 s3cfb s3cfb.0: fimd sclk rate 66666666, clkdiv 0xff1bbb
2164<6>[ 1.024874] c0 s3cfb s3cfb.0: [fb2] dma: 0x6a700000, cpu: 0xec899000, size: 0x007d0000
2165<6>[ 1.028794] c0 sec_getlog_supply_fbinfo: 0x6a700000 1280 800 32 2
2166<6>[ 1.035346] c0 Bootloader sent 'bootloaderfb' : 5EC00000
2167<6>[ 1.036542] c0 s3cfb s3cfb.0: parent clock: 66666666, vclk: 66666000, vclk div: 1
2168<6>[ 1.036689] c0 s3cfb s3cfb.0: registered successfully
2169<6>[ 1.037152] c0 lcd panel: lcd panel driver has been probed.
2170<6>[ 1.037847] c0 mdnie mdnie: lcdtype = 2
2171<6>[ 1.037884] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI
2172<6>[ 1.037925] c0 mdnie mdnie: registered successfully
2173<6>[ 1.038448] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
2174<6>[ 1.040098] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
2175<6>[ 1.040449] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
2176<6>[ 1.040783] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
2177<6>[ 1.041106] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
2178<4>[ 1.042230] c0 Mali: ::Q::exynos_result_of_asv : 0
2179<4>[ 1.042265] c0 Mali: mali_dvfs[0].vol = 950000
2180<4>[ 1.042294] c0 Mali: mali_dvfs[1].vol = 975000
2181<4>[ 1.042324] c0 Mali: mali_runtime_resume.vol = 975000
2182<4>[ 1.042356] c0 Mali: mali_dvfs[2].vol = 1050000
2183<4>[ 1.042385] c0 Mali: mali_dvfs[3].vol = 1100000
2184<4>[ 1.042414] c0 Mali: init_gpu_vol = 1100000
2185<4>[ 1.042818] c0 Mali: Mali frequency 440
2186<4>[ 1.042844] c0 Mali: init_mali_clock mali_clock c0c941c0
2187<4>[ 1.043054] c0 Mali: = regulator_set_voltage: 1100000, 1100000
2188<4>[ 1.043429] c0 Mali: Mali frequency 440
2189<7>[ 1.043923] c0 migrating range 6b300 6bb00, retry (0)
2190<4>[ 1.085982] c0 Mali: Mali device driver loaded
2191<4>[ 1.086369] c0 UMP: UMP device driver 0000 loaded
2192<6>[ 1.095164] c0 brd: module loaded
2193<6>[ 1.099524] c0 loop: module loaded
2194<6>[ 1.099564] c0 lkdtm: No crash points registered, enable through debugfs
2195<6>[ 1.100309] c0 stmpe811_adc_i2c_probe: stmpe811 adc driver loading
2196<6>[ 1.100929] c0 stmpe811_reg_init: ret: 0
2197<6>[ 1.100957] c0 stmpe811_reg_init: STMPE811_CHIP_ID(0x811)
2198<6>[ 1.101294] c0 stmpe811_reg_init: STMPE811_ID_VER(0x3)
2199<6>[ 1.101934] c0 stmpe811_reg_init: STMPE811_SYS_CTRL2(0x6)
2200<6>[ 1.102569] c0 stmpe811_reg_init: STMPE811_INT_EN(0x0)
2201<6>[ 1.103205] c0 stmpe811_reg_init: STMPE811_ADC_CTRL1(0x3c)
2202<6>[ 1.103841] c0 stmpe811_reg_init: STMPE811_ADC_CTRL2(0x3)
2203<6>[ 1.104477] c0 stmpe811_reg_init: STMPE811_GPIO_AF(0x0)
2204<6>[ 1.105113] c0 stmpe811_reg_init: STMPE811_TSC_CTRL(0x10)
2205<6>[ 1.105677] c0 stmpe811 adc(id 0x811) initialized
2206<6>[ 1.105933] c0 sec_jack_probe : Registering jack driver
2207<6>[ 1.107150] c0 wake enabled for irq 355
2208<6>[ 1.107799] c0 print_constraints: WM1811 LDO1: at 3000 mV
2209<6>[ 1.108271] c0 print_constraints: WM1811 LDO2: at 1050 mV
2210<6>[ 1.123848] c0 wm8994 4-001a: Succeeded to read ID register
2211<6>[ 1.125839] c0 wm8994 4-001a: WM1811 revision C CUST_ID 00
2212<4>[ 1.129401] c0 wm8994 4-001a: No interrupt specified, no interrupts
2213<6>[ 1.131544] c0 PPP generic driver version 2.4.2
2214<6>[ 1.131963] c0 PPP Deflate Compression module registered
2215<6>[ 1.131996] c0 PPP BSD Compression module registered
2216<6>[ 1.133836] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2217<6>[ 1.133910] c2 notifier_call_chain : NOTIFY BAD cryptomgr_notify
2218<6>[ 1.134180] c0 PPP MPPE Compression module registered
2219<6>[ 1.134215] c0 NET: Registered protocol family 24
2220<6>[ 1.134247] c0 tun: Universal TUN/TAP device driver, 1.6
2221<6>[ 1.134278] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
2222<6>[ 1.134834] c0 host_notifier host_notifier.0: notifier_prove
2223<6>[ 1.135591] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2224<7>[ 1.135633] c0 ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
2225<6>[ 1.135872] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
2226<7>[ 1.135911] c0 ohci_hcd: block sizes: ed 64 td 64
2227<6>[ 1.136319] c0 usbcore: registered new interface driver usblp
2228<6>[ 1.136353] c0 Initializing USB Mass Storage driver...
2229<6>[ 1.136543] c0 usbcore: registered new interface driver usb-storage
2230<6>[ 1.136579] c0 USB Mass Storage support registered.
2231<6>[ 1.136907] c0 usbcore: registered new interface driver usbserial
2232<6>[ 1.136944] c0 usbserial: USB Serial Driver core
2233<6>[ 1.137105] c0 USB Serial support registered for pl2303
2234<6>[ 1.137281] c0 usbcore: registered new interface driver pl2303
2235<6>[ 1.137315] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
2236<7>[ 1.137666] c0 migrating range 6b283 6b284, retry (0)
2237<6>[ 1.163213] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
2238<6>[ 1.163255] c0 s3c-udc : version 15 March 2009
2239<7>[ 1.163285] c0 init
2240<7>[ 1.163955] c0 usb: android_bind disconnect
2241<7>[ 1.163983] c0 usb: usb_gadget_disconnect
2242<7>[ 1.166303] c0 usb: usb_string_id cdev(0xe51ca6c0)->next_string_id=1
2243<6>[ 1.166563] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
2244<6>[ 1.166605] c0 android_usb gadget: Number of LUNs=4
2245<6>[ 1.166637] c0 lun0: LUN: removable file: (no medium)
2246<6>[ 1.166670] c0 lun1: LUN: removable file: (no medium)
2247<6>[ 1.166704] c0 lun2: LUN: removable file: (no medium)
2248<6>[ 1.166735] c0 lun3: LUN: removable file: (no medium)
2249<7>[ 1.167950] c0 usb: usb_string_id cdev(0xe51ca6c0)->next_string_id=2
2250<7>[ 1.167994] c0 usb: usb_string_id cdev(0xe51ca6c0)->next_string_id=3
2251<7>[ 1.168037] c0 usb: usb_string_id cdev(0xe51ca6c0)->next_string_id=4
2252<7>[ 1.168074] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
2253<7>[ 1.168107] c0 usb: composite_bind bcdDevice=0x0
2254<7>[ 1.168135] c0 usb: composite_bind composite_manufacturer=
2255<6>[ 1.168173] c0 android_usb gadget: android_usb ready
2256<6>[ 1.168202] c0 usb: Skip udc_enable
2257<6>[ 1.168666] c0 mousedev: PS/2 mouse device common for all mice
2258<6>[ 1.169445] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
2259<7>[ 1.169722] c0 [keys]PWR 0
2260<6>[ 1.172623] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-004a/input/input1
2261<3>[ 1.230039] c0 mxt_power_on is finished
2262<6>[ 1.540442] c0 Atmel MXT1664S 3-004a: family: 0xa2 variant: 0x0 version: 0x10 build: 0xaa matrix X,Y size: 32,52 number of obect: 24
2263<6>[ 1.544953] c0 Atmel MXT1664S 3-004a: maXTouch: 24 Objects
2264<6>[ 1.544990] c0 Atmel MXT1664S 3-004a: maXTouch: 56 report ID
2265<6>[ 1.880315] c0 s5p_gpioint_set_type irq:387 is at GPM2(3)
2266<6>[ 1.880775] c0 Atmel MXT1664S 3-004a: Mxt touch success initialization
2267<6>[ 1.880846] c2 Atmel MXT1664S 3-004a: calibration is on going !!
2268<6>[ 1.881137] c2 Atmel MXT1664S 3-004a: reset is ongoing
2269<6>[ 1.882453] c2 Atmel MXT1664S 3-004a: normal mode
2270<6>[ 1.883100] c0 max77686_rtc_probe
2271<6>[ 1.910218] c0 max77686-rtc max77686-rtc: max77686_rtc_init_reg: bypass init
2272<6>[ 1.940396] c0 max77686_rtc_read_time: 112/0/1 14:2:54(0)
2273<6>[ 1.970386] c0 max77686_rtc_read_alarm: 100/0/1 0:0:0(0)
2274<6>[ 1.971102] c0 using rtc device, max77686-rtc, for alarms
2275<6>[ 1.971161] c0 max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
2276<6>[ 1.971209] c0 max77686_irq_unmask: group=2, cur=0xfd
2277<4>[ 1.971840] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
2278<6>[ 1.972303] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
2279<6>[ 1.972541] c0 i2c /dev entries driver
2280<6>[ 1.976251] c0 Linux media interface: v0.10
2281<6>[ 1.976752] c0 lirc_dev: IR Remote Control driver registered, major 247
2282<6>[ 1.976791] c0 IR NEC protocol handler initialized
2283<6>[ 1.976822] c0 IR RC5(x) protocol handler initialized
2284<6>[ 1.976852] c0 IR RC6 protocol handler initialized
2285<6>[ 1.976880] c0 IR JVC protocol handler initialized
2286<6>[ 1.976908] c0 IR Sony protocol handler initialized
2287<6>[ 1.976937] c0 IR RC5 (streamzap) protocol handler initialized
2288<6>[ 1.976969] c0 IR LIRC bridge handler initialized
2289<6>[ 1.976997] c0 Linux video capture interface: v2.00
2290<6>[ 1.977156] c0 v4l2_i2c_drv_init: ISX012 called
2291<6>[ 1.977858] c0 [INFO]flite_probe:2121: FIMC-LITE0 probe success
2292<6>[ 1.977928] c0 [INFO]flite_probe:2121: FIMC-LITE1 probe success
2293<6>[ 1.978250] c0 fimc_is_init_mem_mgr : [cma_info] start_addr : 0x68000000, end_addr : 0x68c00000, total_size : 0xc00000, free_size : 0xc00000
2294<6>[ 1.978378] c0 ctrl->mem.base = 0x68000000
2295<6>[ 1.978405] c0 ctrl->mem.size = 0xc00000
2296<6>[ 1.978429] c0 ctrl->mem.fw_ref_base = 0x68a01000
2297<6>[ 1.978457] c0 ctrl->mem.setfile_ref_base = 0x68b81000
2298<6>[ 1.978953] c0 FIMC-IS probe completed
2299<6>[ 1.979238] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
2300<6>[ 1.979312] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
2301<2>[ 1.979524] c0 Initialize JPEG driver
2302<6>[ 1.979939] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
2303<6>[ 1.980237] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
2304<4>[ 1.980521] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
2305<6>[ 1.980844] c0 s5p_int_src_ext_hpd()
2306<6>[ 1.980873] c0 s5p_hpd_read_gpio(0)
2307<6>[ 1.981074] c0 s5p_hpd_read_gpio(0)
2308<6>[ 1.981732] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
2309<4>[ 1.981908] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
2310<4>[ 1.981945] c0 i2c-core: driver [s5p_ddc] using legacy resume method
2311<6>[ 1.982209] c0 mfc_init_mem_mgr[581] cma 0x5c200000 0x5f000000 0x2e00000 0x2e00000 1
2312<6>[ 1.982726] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
2313<6>[ 1.983415] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
2314<6>[ 1.983816] c0 sii9234_cfg_gpio()
2315<6>[ 1.983863] c0 Registered interrupt support for gpio group 10.
2316<6>[ 1.983902] c0 s5p_gpioint_set_type irq:413 is at GPF3(5)
2317<6>[ 1.983940] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
2318<6>[ 1.984196] c0 s5p_gpioint_set_type irq:413 is at GPF3(5)
2319<6>[ 1.984321] c0 sii9234 : create mhl sysfile
2320<6>[ 1.984970] c0 input: sii9234_rcp as /devices/virtual/input/input2
2321<6>[ 1.985992] c0 smb347_i2c_probe : smb347 Charger Driver Loading
2322<6>[ 1.986028] c0 register callback functions!
2323<6>[ 1.986053] c0 smb347 charger initialized.
2324<6>[ 1.986896] c0 device-mapper: uevent: version 1.0.3
2325<6>[ 1.987475] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
2326<6>[ 1.988464] c0 cpuidle: using governor ladder
2327<6>[ 1.989724] c0 cpuidle: using governor menu
2328<6>[ 1.989884] c0 mshci: Mobile Storage Host Controller Interface driver
2329<6>[ 1.989921] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
2330<6>[ 1.990140] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (40000000 Hz)
2331<3>[ 1.990818] c0 mmc0: Version ID 0x5342240a.
2332<6>[ 1.990969] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
2333<6>[ 1.991373] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
2334<6>[ 1.991701] c0 sdhci: Secure Digital Host Controller Interface driver
2335<6>[ 1.991739] c0 sdhci: Copyright(c) Pierre Ossman
2336<6>[ 1.991888] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
2337<6>[ 1.992173] c0 mmc1: vtf_2.8v regulator found
2338<7>[ 1.992385] c0 Registered led device: mmc1::
2339<6>[ 1.993213] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
2340<6>[ 1.993270] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
2341<6>[ 1.993497] c0 wake enabled for irq 380
2342<6>[ 1.993523] c0 mmc1: card removed.
2343<6>[ 1.993650] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
2344<3>[ 1.993738] c0 mmc2: no vmmc regulator found
2345<7>[ 1.993956] c0 Registered led device: mmc2::
2346<6>[ 1.994200] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
2347<6>[ 2.002469] c0 usbcore: registered new interface driver usbhid
2348<6>[ 2.002504] c0 usbhid: USB HID core driver
2349<3>[ 2.030843] c0 mmc0: cmd 52 response timeout error
2350<3>[ 2.031694] c0 mmc0: cmd 52 response timeout error
2351<4>[ 2.032013] c2 i2c-core: driver [isa1200_vibrator] using legacy suspend method
2352<4>[ 2.032055] c2 i2c-core: driver [isa1200_vibrator] using legacy resume method
2353<6>[ 2.032151] c2 lsm330dlc_accel_probe: is started
2354<6>[ 2.033583] c2 Registered sensors device: accelerometer_sensor
2355<6>[ 2.033631] c2 lsm330dlc_accel_probe: successful, position = 4
2356<6>[ 2.033868] c2 lsm330dlc_gyro_probe, started
2357<6>[ 2.034318] c0 input: gyro_sensor as /devices/virtual/input/input3
2358<3>[ 2.034360] c0 mmc0: cmd 8 response timeout error
2359<6>[ 2.034883] c0 Registered sensors device: gyro_sensor
2360<6>[ 2.034937] c0 lsm330dlc_gyro_probe, position = 4
2361<6>[ 2.034969] c0 lsm330dlc_gyro_probe, successful
2362<6>[ 2.035189] c0 akm8975_probe is called.
2363<3>[ 2.035352] c0 mmc0: cmd 5 response timeout error
2364<6>[ 2.035429] c0 s5p_gpioint_set_type irq:407 is at GPM4(7)
2365<3>[ 2.036186] c0 mmc0: cmd 5 response timeout error
2366<6>[ 2.036260] c0 akm8975_probe: asa_x = 172, asa_y = 171, asa_z = 183
2367<6>[ 2.036596] c0 Registered sensors device: magnetic_sensor
2368<6>[ 2.036639] c0 akm8975_probe is successful.
2369<6>[ 2.036848] c0 bh1721fvc_probe: is started!
2370<3>[ 2.037016] c0 mmc0: cmd 5 response timeout error
2371<3>[ 2.037844] c0 mmc0: cmd 5 response timeout error
2372<3>[ 2.038142] c0 bh1721fvc_probe: No search bh1721fvc lightsensor!
2373<4>[ 2.038186] c0 bh1721fvc: probe of 9-0023 failed with error -5
2374<6>[ 2.038400] c0 al3201_probe: start
2375<3>[ 2.038762] c0 mmc0: cmd 55 response timeout error
2376<6>[ 2.040237] c0 input: light_sensor as /devices/virtual/input/input4
2377<3>[ 2.040668] c0 mmc0: cmd 55 response timeout error
2378<6>[ 2.040736] c0 Registered sensors device: light_sensor
2379<6>[ 2.040777] c0 al3201_probe: success!
2380<6>[ 2.041347] c0 input: sec_keyboard as /devices/platform/sec_keyboard/input/input5
2381<3>[ 2.041523] c0 mmc0: cmd 55 response timeout error
2382<6>[ 2.042234] c0 ir_remocon_probe start!
2383<3>[ 2.042374] c0 mmc0: cmd 55 response timeout error
2384<6>[ 2.061767] c0 mmc0: VTU00M: 15010056545530304dfc3d39868641fb
2385<4>[ 2.100228] c0 ------------[ cut here ]------------
2386<4>[ 2.100275] c0 WARNING: at ../../../../../../kernel/samsung/html6405/drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x6c/0x15c()
2387<4>[ 2.100336] c0 autorequest GPIO-116
2388<4>[ 2.100358] c0 Modules linked in:
2389<4>[ 2.100381] c0 Backtrace:
2390<4>[ 2.100421] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
2391<4>[ 2.100469] c0 r7:c0398ee0 r6:00000009 r5:e902bd60 r4:c08387ac
2392<4>[ 2.100528] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c00a391c>] (warn_slowpath_common+0x80/0x90)
2393<4>[ 2.100585] c0 [<c00a389c>] (warn_slowpath_common+0x0/0x90) from [<c00a3964>] (warn_slowpath_fmt+0x38/0x40)
2394<4>[ 2.100636] c0 r9:c0d719fc r8:00000003 r7:00000074 r6:c0d53f90 r5:c0cc8050
2395<4>[ 2.100685] c0 r4:c0d53f94
2396<4>[ 2.100714] c0 [<c00a392c>] (warn_slowpath_fmt+0x0/0x40) from [<c0398ee0>] (gpio_ensure_requested+0x6c/0x15c)
2397<4>[ 2.100770] c0 r3:00000074 r2:c0a33138
2398<4>[ 2.100807] c0 [<c0398e74>] (gpio_ensure_requested+0x0/0x15c) from [<c03991d0>] (gpio_direction_output+0xac/0x15c)
2399<4>[ 2.100861] c0 r9:c0d719fc r8:00000001 r7:20000013 r6:c0cc8050 r5:00000003
2400<4>[ 2.100911] c0 r4:c0d53a20
2401<4>[ 2.100943] c0 [<c0399124>] (gpio_direction_output+0x0/0x15c) from [<c0073c28>] (irda_wake_en+0x24/0x48)
2402<4>[ 2.101004] c0 [<c0073c04>] (irda_wake_en+0x0/0x48) from [<c083193c>] (ir_remocon_probe+0x1c0/0x854)
2403<4>[ 2.101053] c0 r4:e51f9000 r3:c0073c04
2404<4>[ 2.101092] c0 [<c083177c>] (ir_remocon_probe+0x0/0x854) from [<c0538778>] (i2c_device_probe+0xb4/0x10c)
2405<4>[ 2.101153] c0 [<c05386c4>] (i2c_device_probe+0x0/0x10c) from [<c0402fd8>] (driver_probe_device+0xa0/0x1ec)
2406<4>[ 2.101205] c0 r9:00000000 r8:00000000 r7:c0ceb108 r6:c0ceb108 r5:c0d56eb8
2407<4>[ 2.101255] c0 r4:e96d4420
2408<4>[ 2.101285] c0 [<c0402f38>] (driver_probe_device+0x0/0x1ec) from [<c0403218>] (__driver_attach+0xa8/0xac)
2409<4>[ 2.101335] c0 r8:00000000 r7:e96d4454 r6:c0ceb108 r5:c08432b8 r4:e96d4420
2410<4>[ 2.101385] c0 r3:00000000
2411<4>[ 2.101413] c0 [<c0403170>] (__driver_attach+0x0/0xac) from [<c04016bc>] (bus_for_each_dev+0x78/0xb4)
2412<4>[ 2.101461] c0 r7:c0403170 r6:c0ceb108 r5:c08258e4 r4:00000000
2413<4>[ 2.101512] c0 [<c0401644>] (bus_for_each_dev+0x0/0xb4) from [<c0402be4>] (driver_attach+0x2c/0x30)
2414<4>[ 2.101561] c0 r7:e93b9e40 r6:c0cd8528 r5:c0ceb108 r4:c0ceb108
2415<4>[ 2.101612] c0 [<c0402bb8>] (driver_attach+0x0/0x30) from [<c04026d8>] (bus_add_driver+0xec/0x2fc)
2416<4>[ 2.101667] c0 [<c04025ec>] (bus_add_driver+0x0/0x2fc) from [<c0403a58>] (driver_register+0xa0/0x1b4)
2417<4>[ 2.101724] c0 [<c04039b8>] (driver_register+0x0/0x1b4) from [<c053aedc>] (i2c_register_driver+0x40/0xe0)
2418<4>[ 2.101777] c0 r9:00000000 r8:00000000 r7:e902a000 r6:c0d2c2e0 r5:c0049d50
2419<4>[ 2.101827] c0 r4:c0ceb0e0
2420<4>[ 2.101857] c0 [<c053ae9c>] (i2c_register_driver+0x0/0xe0) from [<c0035f78>] (ir_remocon_init+0x20/0x28)
2421<4>[ 2.101907] c0 r4:c00499e4 r3:c053ae9c
2422<4>[ 2.101946] c0 [<c0035f58>] (ir_remocon_init+0x0/0x28) from [<c0052ac4>] (do_one_initcall+0x154/0x1c4)
2423<4>[ 2.102005] c0 [<c0052970>] (do_one_initcall+0x0/0x1c4) from [<c0008f34>] (kernel_init+0x1bc/0x27c)
2424<4>[ 2.102067] c0 [<c0008d78>] (kernel_init+0x0/0x27c) from [<c00a841c>] (do_exit+0x0/0x984)
2425<4>[ 2.102110] c0 r7:00000013 r6:c00a841c r5:c0008d78 r4:00000000
2426<4>[ 2.102165] c0 ---[ end trace d382f095d464fead ]---
2427<3>[ 2.102228] c0 irda_wake_en: irda_wake_en : 1
2428<6>[ 2.153999] c0 mmc0 : 10 : 0c : 20130128 : 20141021.
2429<6>[ 2.154033] c0 mmc0 : disable PON feature : 10 : 0c : 20130128
2430<4>[ 2.157319] c0 mmc0: Voltage range not supported for power class.
2431<3>[ 2.157356] c0 mmc0: power class selection to bus width 8 failed
2432<4>[ 2.157540] c0 mmc0: Voltage range not supported for power class.
2433<3>[ 2.157579] c0 mmc0: power class selection to bus width 8 ddr 2 failed
2434<6>[ 2.157792] c0 mmc0: new high speed DDR MMC card at address 0001
2435<6>[ 2.158310] c0 mmcblk0: mmc0:0001 VTU00M 14.6 GiB
2436<4>[ 2.159281] c0 ------------[ cut here ]------------
2437<4>[ 2.159326] c0 WARNING: at ../../../../../../kernel/samsung/html6405/block/blk.h:225 get_task_io_context+0xf8/0x104()
2438<4>[ 2.159387] c0 Modules linked in:
2439<4>[ 2.159410] c0 Backtrace:
2440<4>[ 2.159448] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
2441<4>[ 2.159495] c0 r7:c035fddc r6:00000009 r5:00000000 r4:c08387ac
2442<4>[ 2.159551] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c00a391c>] (warn_slowpath_common+0x80/0x90)
2443<4>[ 2.159608] c0 [<c00a389c>] (warn_slowpath_common+0x0/0x90) from [<c00a39d0>] (warn_slowpath_null+0x24/0x2c)
2444<4>[ 2.159664] c0 r9:00000000 r8:c0d52b94 r7:e90d3a00 r6:c0844b24 r5:c0844340
2445<4>[ 2.159714] c0 r4:e90d3e14
2446<4>[ 2.159743] c0 [<c00a39ac>] (warn_slowpath_null+0x0/0x2c) from [<c035fddc>] (get_task_io_context+0xf8/0x104)
2447<4>[ 2.159807] c0 [<c035fce4>] (get_task_io_context+0x0/0x104) from [<c05e1380>] (mmc_request+0x40/0xf0)
2448<4>[ 2.159870] c0 [<c05e1340>] (mmc_request+0x0/0xf0) from [<c0359fc4>] (__blk_run_queue+0x60/0x7c)
2449<4>[ 2.159919] c0 r6:c1f90c00 r5:e97afb48 r4:e9770000 r3:c05e1340
2450<4>[ 2.159976] c0 [<c0359f64>] (__blk_run_queue+0x0/0x7c) from [<c0372cb4>] (cfq_kick_queue+0x34/0x48)
2451<4>[ 2.160028] c0 r4:e9770000 r3:c0359f64
2452<4>[ 2.160070] c0 [<c0372c80>] (cfq_kick_queue+0x0/0x48) from [<c00bf808>] (process_one_work+0x150/0x478)
2453<4>[ 2.160123] c0 r5:e90d21c0 r4:e97afb48
2454<4>[ 2.160163] c0 [<c00bf6b8>] (process_one_work+0x0/0x478) from [<c00bff28>] (worker_thread+0x178/0x410)
2455<4>[ 2.160220] c0 [<c00bfdb0>] (worker_thread+0x0/0x410) from [<c00c4b34>] (kthread+0xcc/0xd0)
2456<4>[ 2.160273] c0 [<c00c4a68>] (kthread+0x0/0xd0) from [<c00a841c>] (do_exit+0x0/0x984)
2457<4>[ 2.160315] c0 r8:00000000 r7:00000013 r6:c00a841c r5:c00c4a68 r4:e9031e7c
2458<4>[ 2.160367] c0 ---[ end trace d382f095d464feae ]---
2459<6>[ 2.163636] c2 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
2460<6>[ 2.202275] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
2461<6>[ 2.210519] c0 2. irda_fw_update: chip : 0202, bin : 0200, need update!
2462<3>[ 2.210842] c0 irda_wake_en: irda_wake_en : 0
2463<6>[ 2.350525] c0 irda_fw_update: boot mode, FW download start! ret=01fe
2464<6>[ 5.500521] c0 1. irda_fw_update: boot down complete
2465<3>[ 5.530518] c0 irda_wake_en: irda_wake_en : 1
2466<6>[ 5.600565] c0 7. irda_fw_update: user mode : Upgrade FW_version : 0200
2467<3>[ 5.600604] c0 irda_wake_en: irda_wake_en : 0
2468<6>[ 5.711033] c0 usbcore: registered new interface driver snd-usb-audio
2469<6>[ 5.712724] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
2470<6>[ 5.712865] c0 audss_init: RCLK SRC[busclk]
2471<6>[ 5.712975] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
2472<6>[ 5.713690] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
2473<6>[ 5.713734] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
2474<7>[ 5.713772] c0 i2s_txctrl: Turn Off - spr is no active
2475<6>[ 5.713817] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
2476<6>[ 5.713857] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
2477<6>[ 5.761142] c0 wm8994-codec wm8994-codec: write 60 = 100
2478<4>[ 5.761359] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
2479<4>[ 5.761402] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
2480<6>[ 5.761906] c0 wm8994-codec wm8994-codec: write 15 = 40
2481<6>[ 5.762119] c0 wm8994-codec wm8994-codec: write 102 = 3
2482<6>[ 5.762332] c0 wm8994-codec wm8994-codec: write 56 = c07
2483<6>[ 5.762545] c0 wm8994-codec wm8994-codec: write 5d = 7e
2484<6>[ 5.762757] c0 wm8994-codec wm8994-codec: write 5e = 0
2485<6>[ 5.762970] c0 wm8994-codec wm8994-codec: write 102 = 0
2486<6>[ 5.763183] c0 wm8994-codec wm8994-codec: write 38 = 30
2487<6>[ 5.763398] c0 wm8994-codec wm8994-codec: write 402 = 1c0
2488<6>[ 5.763612] c0 wm8994-codec wm8994-codec: write 403 = 1c0
2489<6>[ 5.763825] c0 wm8994-codec wm8994-codec: write 406 = 1c0
2490<6>[ 5.764041] c0 wm8994-codec wm8994-codec: write 407 = 1c0
2491<6>[ 5.764254] c0 wm8994-codec wm8994-codec: write 502 = 1c0
2492<6>[ 5.764466] c0 wm8994-codec wm8994-codec: write 503 = 1c0
2493<6>[ 5.764681] c0 wm8994-codec wm8994-codec: write 400 = 1c0
2494<6>[ 5.764893] c0 wm8994-codec wm8994-codec: write 401 = 1c0
2495<6>[ 5.765107] c0 wm8994-codec wm8994-codec: write 404 = 1c0
2496<6>[ 5.765324] c0 wm8994-codec wm8994-codec: write 405 = 1c0
2497<6>[ 5.765537] c0 wm8994-codec wm8994-codec: write 500 = 1c0
2498<6>[ 5.765750] c0 wm8994-codec wm8994-codec: write 501 = 1c0
2499<6>[ 5.765963] c0 wm8994-codec wm8994-codec: write 610 = 3c0
2500<6>[ 5.766176] c0 wm8994-codec wm8994-codec: write 611 = 3c0
2501<6>[ 5.766389] c0 wm8994-codec wm8994-codec: write 612 = 3c0
2502<6>[ 5.766604] c0 wm8994-codec wm8994-codec: write 613 = 3c0
2503<6>[ 5.766817] c0 wm8994-codec wm8994-codec: write 421 = 210
2504<6>[ 5.767030] c0 wm8994-codec wm8994-codec: write 423 = 210
2505<6>[ 5.767243] c0 wm8994-codec wm8994-codec: write 521 = 210
2506<6>[ 5.767461] c0 wm8994-codec wm8994-codec: write 34 = 10
2507<6>[ 5.767676] c0 wm8994-codec wm8994-codec: write 35 = 10
2508<6>[ 5.767889] c0 wm8994-codec wm8994-codec: write 38 = b0
2509<6>[ 5.768102] c0 wm8994-codec wm8994-codec: write 37 = 80
2510<6>[ 5.768327] c0 wm8994-codec wm8994-codec: write 440 = 9b
2511<6>[ 5.768541] c0 wm8994-codec wm8994-codec: write 441 = 844
2512<6>[ 5.768755] c0 wm8994-codec wm8994-codec: write 442 = e8
2513<6>[ 5.768970] c0 wm8994-codec wm8994-codec: write 443 = 210
2514<6>[ 5.769185] c0 wm8994-codec wm8994-codec: write 440 = 98
2515<6>[ 5.769399] c0 wm8994-codec wm8994-codec: write 450 = 9b
2516<6>[ 5.769612] c0 wm8994-codec wm8994-codec: write 451 = 844
2517<6>[ 5.769825] c0 wm8994-codec wm8994-codec: write 452 = e8
2518<6>[ 5.770048] c0 wm8994-codec wm8994-codec: write 453 = 210
2519<6>[ 5.770265] c0 wm8994-codec wm8994-codec: write 450 = 98
2520<6>[ 5.770479] c0 wm8994-codec wm8994-codec: write 540 = 9b
2521<6>[ 5.770691] c0 wm8994-codec wm8994-codec: write 541 = 844
2522<6>[ 5.770904] c0 wm8994-codec wm8994-codec: write 542 = e8
2523<6>[ 5.771117] c0 wm8994-codec wm8994-codec: write 543 = 210
2524<6>[ 5.771331] c0 wm8994-codec wm8994-codec: write 540 = 98
2525<6>[ 5.771589] c0 wm8994-codec wm8994-codec: write 3d = 2f
2526<6>[ 5.771804] c0 wm8994-codec wm8994-codec: write 3e = 27
2527<6>[ 5.772019] c0 wm8994-codec wm8994-codec: write 18 = 18b
2528<6>[ 5.772232] c0 wm8994-codec wm8994-codec: write 1a = 18b
2529<6>[ 5.772443] c0 wm8994-codec wm8994-codec: write 19 = 18b
2530<6>[ 5.772655] c0 wm8994-codec wm8994-codec: write 1b = 18b
2531<6>[ 5.772868] c0 wm8994-codec wm8994-codec: write 26 = 179
2532<6>[ 5.773079] c0 wm8994-codec wm8994-codec: write 27 = 179
2533<6>[ 5.773291] c0 wm8994-codec wm8994-codec: write 1c = 1ed
2534<6>[ 5.773504] c0 wm8994-codec wm8994-codec: write 1d = 1ed
2535<6>[ 5.773717] c0 wm8994-codec wm8994-codec: write 20 = 1f9
2536<6>[ 5.773929] c0 wm8994-codec wm8994-codec: write 21 = 1f9
2537<6>[ 5.776271] c0 Sound: enabled mclk
2538<7>[ 5.776297] c0 pmu_debug: 0x00000900
2539<6>[ 5.781322] c0 Sound: state: 1, use_cnt: 1
2540<6>[ 5.781630] c0 wm8994-codec wm8994-codec: write 200 = 8
2541<6>[ 5.781853] c0 wm8994-codec wm8994-codec: write d0 = 1400
2542<6>[ 5.782070] c0 wm8994-codec wm8994-codec: write 210 = 81
2543<6>[ 5.782284] c0 wm8994-codec wm8994-codec: write 211 = 81
2544<6>[ 5.782518] c0 wm8994-codec wm8994-codec: write d0 = 0
2545<6>[ 5.786518] c0 wm8994-codec wm8994-codec: write 2 = 2000
2546<6>[ 5.786743] c0 wm8994-codec wm8994-codec: write 4 = 300
2547<6>[ 5.786958] c0 wm8994-codec wm8994-codec: write 5 = 300
2548<6>[ 5.787176] c0 wm8994-codec wm8994-codec: write 208 = a
2549<6>[ 5.787391] c0 wm8994-codec wm8994-codec: write 200 = 9
2550<6>[ 5.787704] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
2551<6>[ 5.787977] c0 wm8994-codec wm8994-codec: write 702 = 8101
2552<6>[ 5.788421] c0 wm8994-codec wm8994-codec: write 703 = 8101
2553<6>[ 5.788861] c0 wm8994-codec wm8994-codec: write 704 = 8101
2554<6>[ 5.790321] c0 asoc: wm8994-aif2 <-> midas.cp mapping ok
2555<6>[ 5.791568] c0 asoc: wm8994-aif3 <-> midas.bt mapping ok
2556<6>[ 5.791660] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
2557<6>[ 5.791703] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
2558<7>[ 5.791746] c0 i2s_txctrl: Turn Off - spr is no active
2559<6>[ 5.791796] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
2560<6>[ 5.791832] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
2561<7>[ 5.793292] c0 migrating range 6b2a0 6b2c0, retry (0)
2562<7>[ 5.819426] c0 migrating range 6b2c0 6b2e0, retry (0)
2563<6>[ 5.845358] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
2564<6>[ 5.847954] c0 Samsung SRP driver, (c)2011 Samsung Electronics
2565<6>[ 5.849168] c0 ALSA device list:
2566<6>[ 5.849193] c0 #0: Midas_WM1811
2567<6>[ 5.849359] c0 GACT probability NOT on
2568<6>[ 5.849389] c0 Mirror/redirect action on
2569<6>[ 5.849416] c0 u32 classifier
2570<6>[ 5.849435] c0 Actions configured
2571<6>[ 5.849460] c0 Netfilter messages via NETLINK v0.30.
2572<6>[ 5.849537] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
2573<6>[ 5.850867] c0 ctnetlink v0.93: registering with nfnetlink.
2574<6>[ 5.850931] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
2575<6>[ 5.850971] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
2576<6>[ 5.851499] c0 xt_time: kernel timezone is -0000
2577<6>[ 5.853500] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
2578<6>[ 5.853680] c0 arp_tables: (C) 2002 David S. Miller
2579<6>[ 5.853749] c0 TCP cubic registered
2580<6>[ 5.853772] c0 Initializing XFRM netlink socket
2581<6>[ 5.854859] c0 NET: Registered protocol family 10
2582<6>[ 5.857989] c0 Mobile IPv6
2583<6>[ 5.858038] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
2584<6>[ 5.858384] c0 IPv6 over IPv4 tunneling driver
2585<6>[ 5.864154] c0 NET: Registered protocol family 17
2586<6>[ 5.864211] c0 NET: Registered protocol family 15
2587<6>[ 5.864367] c0 Bluetooth: RFCOMM TTY layer initialized
2588<6>[ 5.864412] c0 Bluetooth: RFCOMM socket layer initialized
2589<6>[ 5.864446] c0 Bluetooth: RFCOMM ver 1.11
2590<6>[ 5.864473] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
2591<6>[ 5.864506] c0 Bluetooth: BNEP filters: protocol multicast
2592<6>[ 5.864539] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
2593<6>[ 5.864841] c0 NET: Registered protocol family 35
2594<5>[ 5.865023] c0 Registering the dns_resolver key type
2595<6>[ 5.865074] c0 EXYNOS4X12: Adaptive Support Voltage init
2596<6>[ 5.865108] c0 EXYNOS4X12(SG): ORIG : 2 MOD : 0 RESULT : 2
2597<4>[ 5.865144] c0 ABB-Control: abb_control_init
2598<4>[ 5.865368] c0 ABB-Control; int: 100100 KHz 1000 mV
2599<4>[ 5.865409] c0 ABB-Control; int: 267160 KHz 1000 mV
2600<4>[ 5.865444] c0 ABB-Control; int: 400266 KHz 1000 mV
2601<4>[ 5.865489] c0 ABB-Control; mif: 100100 KHz 1000 mV
2602<4>[ 5.865523] c0 ABB-Control; mif: 267160 KHz 1000 mV
2603<4>[ 5.865557] c0 ABB-Control; mif: 400266 KHz 1000 mV
2604<4>[ 5.865595] c0 ABB-Control; g3d: 54000 KHz 1050 mV
2605<4>[ 5.865628] c0 ABB-Control; g3d: 300000 KHz 1300 mV
2606<4>[ 5.865665] c0 ABB-Control; g3d: 533000 KHz 1300 mV
2607<4>[ 5.865699] c0 ABB-Control; g3d: 9999999 KHz 1300 mV
2608<4>[ 5.865736] c0 ABB-Control; arm: 100000 KHz 1000 mV
2609<4>[ 5.865770] c0 ABB-Control; arm: 800000 KHz 1000 mV
2610<4>[ 5.865804] c0 ABB-Control; arm: 1600000 KHz 1000 mV
2611<4>[ 5.865838] c0 ABB-Control; arm: 9999999 KHz 1000 mV
2612<6>[ 5.865876] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
2613<5>[ 5.865944] c0 Registering SWP/SWPB emulation handler
2614<5>[ 5.865979] c0 Registering SDIV/UDIV emulation handler
2615<6>[ 5.866084] c0 DVFS : VDD_ARM Voltage table set with 2 Group
2616<6>[ 5.866840] c0 DVFS : VDD_INT Voltage table set with 2 Group
2617<7>[ 5.867543] c0 mif: set_hsic_lpa_states: 300: called(s5p_usb_phy_init+0x160/0x364):
2618<6>[ 5.867591] c0 s5p-ehci s5p-ehci: usb phy usage(2)
2619<7>[ 5.867700] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1
2620<7>[ 5.867748] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
2621<7>[ 5.867788] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
2622<7>[ 5.867828] c0 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
2623<7>[ 5.867879] c0 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
2624<6>[ 5.867927] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
2625<7>[ 5.868007] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file 'devices'
2626<7>[ 5.868068] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
2627<6>[ 5.868455] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
2628<7>[ 5.868667] c0 migrating range 6b284 6b285, retry (0)
2629<7>[ 5.894161] c0 migrating range 6b285 6b286, retry (0)
2630<7>[ 5.919416] c0 migrating range 6b286 6b287, retry (0)
2631<7>[ 5.944644] c0 s5p-ehci s5p-ehci: park 0
2632<7>[ 5.944673] c0 s5p-ehci s5p-ehci: support lpm
2633<6>[ 5.944726] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
2634<7>[ 5.944770] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
2635<7>[ 5.944828] c0 s5p-ehci s5p-ehci: init command 0010005 (park)=0 ithresh=1 period=512 RUN
2636<6>[ 5.960083] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
2637<7>[ 5.960245] c0 usb usb1: default language 0x0409
2638<7>[ 5.960297] c0 usb usb1: udev 1, busnum 1, minor = 0
2639<6>[ 5.960331] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
2640<6>[ 5.960374] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2641<6>[ 5.960417] c0 usb usb1: Product: S5P EHCI Host Controller
2642<6>[ 5.960451] c0 usb usb1: Manufacturer: Linux 3.0.101-HTML6405-N8000 ehci_hcd
2643<6>[ 5.960493] c0 usb usb1: SerialNumber: s5p-ehci
2644<7>[ 5.961080] c0 usb usb1: usb_probe_device
2645<7>[ 5.961111] c0 usb usb1: configuration #1 chosen from 1 choice
2646<7>[ 5.961169] c0 usb usb1: adding 1-0:1.0 (config #1, interface 0)
2647<7>[ 5.961405] c0 hub 1-0:1.0: usb_probe_interface
2648<7>[ 5.961436] c0 hub 1-0:1.0: usb_probe_interface - got id
2649<6>[ 5.961471] c0 hub 1-0:1.0: USB hub found
2650<6>[ 5.961510] c0 hub 1-0:1.0: 3 ports detected
2651<7>[ 5.961538] c0 hub 1-0:1.0: standalone hub
2652<7>[ 5.961564] c0 hub 1-0:1.0: individual port power switching
2653<7>[ 5.961597] c0 hub 1-0:1.0: individual port over-current protection
2654<7>[ 5.961633] c0 hub 1-0:1.0: power on to power good time: 20ms
2655<7>[ 5.961677] c0 hub 1-0:1.0: local power source is good
2656<7>[ 5.961710] c0 hub 1-0:1.0: enabling power on all ports
2657<7>[ 5.962019] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
2658<6>[ 5.962157] c0 CP not ready, Active State low
2659<6>[ 5.962563] c0 s5p-ohci s5p-ohci: usb phy usage(6)
2660<3>[ 5.962596] c0 s5p-ohci s5p-ohci: Already power on PHY
2661<7>[ 5.962628] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
2662<7>[ 5.962672] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
2663<6>[ 5.962709] c0 s5p-ohci s5p-ohci: s5p OHCI
2664<7>[ 5.962750] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '002'
2665<6>[ 5.963101] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
2666<7>[ 5.963155] c0 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e9126508
2667<7>[ 5.963320] c0 migrating range 6b287 6b288, retry (0)
2668<7>[ 5.988673] c0 s5p-ohci s5p-ohci: created debug files
2669<6>[ 5.988732] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
2670<7>[ 5.988767] c0 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e9126508
2671<7>[ 6.042073] c0 s5p-ohci s5p-ohci: OHCI controller state
2672<7>[ 6.042110] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
2673<7>[ 6.042152] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
2674<7>[ 6.042194] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
2675<7>[ 6.042231] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
2676<7>[ 6.042268] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
2677<7>[ 6.042310] c0 s5p-ohci s5p-ohci: hcca frame #0003
2678<7>[ 6.042344] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
2679<7>[ 6.042385] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
2680<7>[ 6.042424] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
2681<7>[ 6.042462] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
2682<7>[ 6.042506] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
2683<7>[ 6.042546] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
2684<7>[ 6.042655] c0 usb usb2: default language 0x0409
2685<7>[ 6.042706] c0 usb usb2: udev 1, busnum 2, minor = 128
2686<6>[ 6.042740] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
2687<6>[ 6.042783] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2688<6>[ 6.042825] c0 usb usb2: Product: s5p OHCI
2689<6>[ 6.042851] c0 usb usb2: Manufacturer: Linux 3.0.101-HTML6405-N8000 ohci_hcd
2690<6>[ 6.042890] c0 usb usb2: SerialNumber: s5p-ohci
2691<7>[ 6.043454] c0 usb usb2: usb_probe_device
2692<7>[ 6.043484] c0 usb usb2: configuration #1 chosen from 1 choice
2693<7>[ 6.043542] c0 usb usb2: adding 2-0:1.0 (config #1, interface 0)
2694<7>[ 6.043790] c0 hub 2-0:1.0: usb_probe_interface
2695<7>[ 6.043820] c0 hub 2-0:1.0: usb_probe_interface - got id
2696<6>[ 6.043856] c0 hub 2-0:1.0: USB hub found
2697<6>[ 6.043893] c0 hub 2-0:1.0: 3 ports detected
2698<7>[ 6.043920] c0 hub 2-0:1.0: standalone hub
2699<7>[ 6.043946] c0 hub 2-0:1.0: no power switching (usb 1.0)
2700<7>[ 6.043978] c0 hub 2-0:1.0: global over-current protection
2701<7>[ 6.044011] c0 hub 2-0:1.0: power on to power good time: 4ms
2702<7>[ 6.044057] c0 hub 2-0:1.0: local power source is good
2703<7>[ 6.044088] c0 hub 2-0:1.0: no over-current condition exists
2704<7>[ 6.044122] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub
2705<7>[ 6.044436] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
2706<6>[ 6.044697] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 10, 2nd_throttle = 16
2707<6>[ 6.044745] c0 s5p_tmu_probe: cpufreq_level[15], busfreq_value[133133]
2708<6>[ 6.044782] c0 @@@ get_refresh_interval = 0x2e
2709<6>[ 6.044809] c0 @@@ get_refresh_interval = 0x5d
2710<6>[ 6.044845] c0 ** temperature set value **
2711<6>[ 6.044867] c0 1st throttling stop_temp = 78, start_temp = 80
2712<6>[ 6.044898] c0 2nd throttling stop_temp = 87, start_tmep = 103
2713<6>[ 6.044929] c0 tripping temp = 110, s/w emergency temp = 120
2714<6>[ 6.044962] c0 mem throttling stop_temp = 80, start_temp = 85
2715<6>[ 6.044999] c0 tc_voltage stop_temp = 13, start_temp = 10
2716<4>[ 6.046180] c0 temperature code is in inaccurate -->check if vdd_18_ts is on
2717<4>[ 6.046215] c0 or surrounding temp is low.
2718<6>[ 6.046243] c0 current temp is -28 celsius degree.
2719<6>[ 6.046268] c0 so, set to 0 celsius degree!
2720<6>[ 6.046300] c0 TMU: lock is ok!
2721<6>[ 6.046492] c0 mif: init_modem, system_rev = 6
2722<6>[ 6.046547] c0 mif: umts_modem_cfg_gpio done
2723<6>[ 6.046581] c0 mif: modem_link_pm_config_gpio done
2724<3>[ 6.046882] c0 mif: modem_probe: modem_if
2725<6>[ 6.047792] c0 wake enabled for irq 366
2726<6>[ 6.047876] c0 wake enabled for irq 367
2727<6>[ 6.047903] c0 mif: create_modemctl_device: xmm6262 is created!!!
2728<6>[ 6.048455] c0 wake enabled for irq 361
2729<6>[ 6.048782] c0 usbcore: registered new interface driver cdc_modem
2730<6>[ 6.048831] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe9097400)
2731<6>[ 6.048870] c0 mif: hsic_create_link_device: usb : create_link_device DONE
2732<3>[ 6.048909] c0 mif: modem_probe: link created: usb
2733<6>[ 6.049416] c0 mif: create_io_device: Bood device = umts_boot0
2734<7>[ 6.060148] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
2735<6>[ 6.060685] c0 mif: modem_probe: Complete!!!
2736<3>[ 6.063371] c0 [E-PEN] wacom_i2c_init: Sleep type-PEN_LDO_EN pin
2737<7>[ 6.140102] c2 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
2738<6>[ 6.380644] c0 [E-PEN] wacom_i2c_query: 0th ret of wacom query=9
2739<5>[ 6.380679] c0 [E-PEN] x_max=0x556A
2740<5>[ 6.380702] c0 [E-PEN] y_max=0x35A2
2741<5>[ 6.380726] c0 [E-PEN] pressure_max=0x3FF
2742<5>[ 6.380753] c0 [E-PEN] fw_version=0x22F (d7:0x2,d8:0x2F)
2743<5>[ 6.380787] c0 [E-PEN] F, 55, 88, 35, C0, 3, FF, 2, 2F
2744<7>[ 6.590613] c0 [E-PEN] received checksum 1f, f1, 76, 81, 71
2745<7>[ 6.711401] c0 [E-PEN] epen_connection : Pass 0
2746<6>[ 6.712002] c0 input: sec_e-pen as /devices/platform/s3c2440-i2c.6/i2c-6/6-0056/input/input6
2747<6>[ 6.712288] c0 wake enabled for irq 365
2748<5>[ 6.713097] c0 [E-PEN] wacom fw ver : 0x22f, new fw ver : 0x22f
2749<6>[ 6.713228] c0 s5p_gpioint_set_type irq:394 is at GPC1(2)
2750<6>[ 6.713442] c0 s5p_gpioint_set_type irq:392 is at GPC1(0)
2751<7>[ 6.713511] c2 [E-PEN] pdct 1(0)
2752<6>[ 6.740423] c0 max77686_rtc_read_time: 112/0/1 14:2:59(0)
2753<6>[ 6.740487] c0 max77686-rtc max77686-rtc: setting system clock to 2012-01-01 14:02:59 UTC (1325426579)
2754<7>[ 6.740652] c0 ctrl->mem.size = 0xc00000
2755<7>[ 6.740678] c0 ctrl->mem.base = 0x69b00000
2756<6>[ 6.741234] c0 FIMC0 registered successfully
2757<7>[ 6.741405] c0 ctrl->mem.size = 0x1810000
2758<7>[ 6.741433] c0 ctrl->mem.base = 0x65c00000
2759<6>[ 6.741792] c0 FIMC1 registered successfully
2760<7>[ 6.741943] c0 ctrl->mem.size = 0x0
2761<7>[ 6.741967] c0 ctrl->mem.base = 0x0
2762<6>[ 6.742313] c0 FIMC2 registered successfully
2763<7>[ 6.742472] c0 ctrl->mem.size = 0x0
2764<7>[ 6.742496] c0 ctrl->mem.base = 0xffffffea
2765<6>[ 6.742838] c0 FIMC3 registered successfully
2766<6>[ 6.743156] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
2767<7>[ 6.760046] c2 [E-PEN] pen_insert_work : 1
2768<6>[ 6.763029] c0 sec_bat_probe : SEC Battery Driver Loading
2769<6>[ 6.763089] c0 Registered interrupt support for gpio group 23.
2770<6>[ 6.763122] c0 BAT : Battery GPIO initialized.
2771<6>[ 6.763343] c0 level = 100
2772<6>[ 6.763542] c0 level = 100
2773<7>[ 6.810058] c2 [E-PEN] wacom_i2c_pendct_work , 1
2774<7>[ 7.040053] c0 s5p-ohci s5p-ohci: auto-stop root hub
2775<6>[ 7.040143] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
2776<6>[ 7.040368] c0 exynos4_handler_tmu_state: inform to init state to platform.
2777<6>[ 7.070063] c0 usb_switch_set_path: 0 current_path before changing
2778<6>[ 7.070113] c0 usb_apply_path: current gpio before changing : sel0:1 sel1:1 sel_cp:0
2779<6>[ 7.070167] c0 usb_apply_path: target path 10000000
2780<6>[ 7.070206] c0 usb_apply_path: 10000000 safeout2 no change
2781<6>[ 7.072254] c0 usb_switch_clr_path: 10000000 current_path before changing
2782<6>[ 7.072305] c0 usb_apply_path: current gpio before changing : sel0:1 sel1:0 sel_cp:0
2783<6>[ 7.072362] c0 usb_apply_path: target path 0
2784<6>[ 7.072395] c0 usb_apply_path: 0 safeout2 off
2785<6>[ 7.072429] c0 pmic_safeout2: onoff:0 No change in safeout2
2786<6>[ 7.072469] c0 usb_apply_path: send "usb_sel" sysfs_notify
2787<6>[ 7.072516] c0 sec_get_dedicted_charger_type : result(1), avg_vol(0)
2788<6>[ 7.072567] c0 sec_charger_cb:cable_type=1,tsp(1),usb(1),attached(1),usblpm(0)
2789<6>[ 7.072626] c0 set_usb_connection_state: set True
2790<6>[ 7.072662] c0 set_usb_connection_state: send "usb_state" sysfs_notify
2791<7>[ 7.072713] c0 usb: s3c_vbus_enable, not ready u_e: 0, is_active: 1
2792<6>[ 7.072756] c0 sec_charger_cb
2793<6>[ 7.072780] c0 sec_get_cable_status: current_status : 1
2794<6>[ 7.072817] c0 Charger Status : USB
2795<6>[ 7.072845] c0 sec_cable_check_status: Returning to Normal discharge path.
2796<6>[ 7.072900] c0 smb347_set_charging_state : enable(1), charging_mode(1)
2797<6>[ 7.072944] c0 smb347_charger_init
2798<6>[ 7.072970] c0 smb347_disable_charging
2799<6>[ 7.127022] c0 smb347_set_charging_state : LOW(USB5) charging enable
2800<6>[ 7.127073] c0 smb347_enable_charging
2801<6>[ 7.127342] c0 smb347_test_read
2802<6>[ 7.127682] c0 smb347 addr : 0x00 data : 0xdd
2803<6>[ 7.128028] c0 smb347 addr : 0x01 data : 0x66
2804<6>[ 7.128374] c0 smb347 addr : 0x02 data : 0xa7
2805<6>[ 7.128720] c0 smb347 addr : 0x03 data : 0x63
2806<6>[ 7.129066] c0 smb347 addr : 0x04 data : 0x80
2807<6>[ 7.129411] c0 smb347 addr : 0x05 data : 0x1a
2808<6>[ 7.129757] c0 smb347 addr : 0x06 data : 0x00
2809<6>[ 7.130144] c0 smb347 addr : 0x07 data : 0xbf
2810<6>[ 7.130498] c0 smb347 addr : 0x08 data : 0x08
2811<6>[ 7.130843] c0 smb347 addr : 0x09 data : 0x0d
2812<6>[ 7.131189] c0 smb347 addr : 0x0a data : 0x3f
2813<6>[ 7.131537] c0 smb347 addr : 0x0b data : 0x01
2814<6>[ 7.131882] c0 smb347 addr : 0x0c data : 0x00
2815<6>[ 7.132228] c0 smb347 addr : 0x0d data : 0x00
2816<6>[ 7.132576] c0 smb347 addr : 0x0e data : 0x0d
2817<6>[ 7.132920] c0 smb347 addr : 0x30 data : 0x82
2818<6>[ 7.133266] c0 smb347 addr : 0x31 data : 0x02
2819<6>[ 7.133615] c0 smb347 addr : 0x32 data : 0x0d
2820<6>[ 7.133961] c0 smb347 addr : 0x33 data : 0x0d
2821<6>[ 7.134306] c0 smb347 addr : 0x34 data : 0x27
2822<6>[ 7.134654] c0 smb347 addr : 0x35 data : 0x00
2823<6>[ 7.134998] c0 smb347 addr : 0x36 data : 0x00
2824<6>[ 7.135344] c0 smb347 addr : 0x37 data : 0x00
2825<6>[ 7.135692] c0 smb347 addr : 0x38 data : 0x40
2826<6>[ 7.136038] c0 smb347 addr : 0x39 data : 0x10
2827<6>[ 7.136383] c0 smb347 addr : 0x3a data : 0x01
2828<6>[ 7.136729] c0 smb347 addr : 0x3b data : 0x23
2829<6>[ 7.137075] c0 smb347 addr : 0x3c data : 0x1e
2830<6>[ 7.137420] c0 smb347 addr : 0x3d data : 0x03
2831<6>[ 7.137767] c0 smb347 addr : 0x3e data : 0x00
2832<6>[ 7.138112] c0 smb347 addr : 0x3f data : 0xc6
2833<6>[ 7.138459] c0 cable USB
2834<6>[ 7.139278] c0 fg_read_temp: temper(26764, 0x1ac4)
2835<6>[ 7.140151] c2 s5p_gpioint_set_type irq:419 is at GPM0(3)
2836<6>[ 7.140484] c0 fg_read_soc: soc(9), psoc(933), vfsoc(6)
2837<6>[ 7.140525] c2 wake enabled for irq 364
2838<6>[ 7.141340] c2 fg_read_vcell: vcell(3673, 0xb7aa)
2839<6>[ 7.142933] c2 fg_read_current: curr(-45), avg_curr(-104mA)
2840<6>[ 7.144928] c0 fg_check_vf_fullcap_range: prevVFFCap(0x4976), newVFFcap(0x4976)
2841<6>[ 7.144986] c0 fg_check_vf_fullcap_range: keep VFFCap: newVFFcap(0x4976)
2842<6>[ 7.146911] c2 avg_v(3670), fullcap(7064), remcap(660), mixcap(663), avcap(657)
2843<6>[ 7.147310] c0 fg_read_soc: soc(9), psoc(933), vfsoc(6)
2844<6>[ 7.147734] c0 fg_read_vcell: vcell(3673, 0xb7aa)
2845<6>[ 7.148529] c0 fg_read_current: curr(-45), avg_curr(-104mA)
2846<6>[ 7.150488] c0 avg_v(3670), fullcap(7064), remcap(660), mixcap(663), avcap(657)
2847<6>[ 7.170053] c2 [MAX17042] 1/1/2012 14:02,
2848<6>[ 7.176146] c2 0000h,ff00h,7f80h,ff01h,0000h,0528h,0956h,4ae7h,
2849<6>[ 7.176185] c2 1ac4h,b6b6h,fac4h,fd65h,000ch,0704h,094dh,052eh,
2850<6>[ 7.180059] c0 [MAX17042] 1/1/2012 14:02,
2851<6>[ 7.186156] c0 0000h,ff00h,7f80h,ff01h,0000h,0528h,0956h,4ae7h,
2852<6>[ 7.186195] c0 1ac4h,b6b6h,fac4h,fd65h,000ch,0704h,094dh,052eh,
2853<6>[ 7.206115] c2 3730h,0fc2h,7d5ah,0000h,0318h,0148h,1ac1h,00a9h,
2854<6>[ 7.206154] c2 4996h,b789h,2114h,c87bh,2ed6h,2214h,0600h,0522h,
2855<6>[ 7.216118] c0 3730h,0fc2h,7d5ah,0000h,0318h,0148h,1ac1h,00a9h,
2856<6>[ 7.216157] c0 4996h,b789h,2114h,c87bh,2ed6h,2214h,0600h,0522h,
2857<6>[ 7.236125] c2 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df0h,
2858<6>[ 7.236167] c2 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
2859<6>[ 7.246113] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7df0h,
2860<6>[ 7.246152] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
2861<6>[ 7.266123] c2 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
2862<6>[ 7.266164] c2 0076h,1a1ch,007dh,0502h,1680h,5608h,65ddh,e000h,
2863<6>[ 7.276107] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
2864<6>[ 7.276147] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,65ddh,e000h,
2865<6>[ 7.276206] c0 Atmel MXT1664S 3-004a: charging mode
2866<6>[ 7.296119] c2 c000h,f050h,f723h,3180h,b77bh,12eah,337eh,ffa9h,
2867<6>[ 7.296159] c2 0787h,634bh,050dh,2600h,054dh,0522h,24a5h,5cc6h,
2868<6>[ 7.306112] c0 c000h,f050h,f723h,3180h,b77bh,12eah,337eh,ffa9h,
2869<6>[ 7.306152] c0 0787h,634bh,050dh,2600h,054dh,0522h,24a5h,5cc6h,
2870<6>[ 7.326128] c2 0238h,0000h,8500h,0001h,0000h,0014h,7700h,0000h,
2871<6>[ 7.326168] c2 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
2872<6>[ 7.336118] c0 0da7h,2214h,f582h,3ef8h,3ff8h,0a38h,1ac4h,0003h,
2873<6>[ 7.336160] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
2874<6>[ 7.356125] c2 0000h,0000h,0000h,0000h,0000h,0000h,0704h,f92bh,
2875<6>[ 7.356165] c2 3ef8h,4cf6h,fd77h,b8d9h,0070h,3910h,b782h,06d9h,
2876<6>[ 7.366121] c0 0000h,0000h,0000h,0000h,0000h,0000h,0704h,f7e3h,
2877<6>[ 7.366160] c0 3ef8h,4cf6h,fd77h,b8d9h,0070h,3910h,b782h,06d9h,
2878<6>[ 7.380079] c2
2879<6>[ 7.390056] c0
2880<6>[ 7.391151] c0 smb347_get_charging_state : 0x3dh(0x05)
2881<6>[ 7.391204] c0 BAT : soc(9), vcell(3673mV), curr(-45mA), avg curr(-105mA), temp(26.7), chg(1)
2882<6>[ 7.391274] c0 , full(0), rechg(0), lowbat(0), cable(1)
2883<6>[ 7.391373] c0 level = 9
2884<6>[ 7.444608] c2 wake enabled for irq 371
2885<6>[ 7.444644] c2 lpm_mode_check : charging_mode_booting(0)
2886<6>[ 7.447122] c2 [ ACCESSORY (acc_con_init,876) ]
2887<6>[ 7.447232] c2 [ ACCESSORY (acc_con_probe,658) ]
2888<4>[ 7.447858] c2 dhd_module_init in
2889<4>[ 7.447891] c2 found wifi platform device bcmdhd_wlan
2890<4>[ 7.448024] c2 Power-up adapter 'DHD generic adapter'
2891<4>[ 7.448224] c2 wifi_platform_set_power = 1
2892<4>[ 7.448260] c2 ------------------------------------------------------------------------------------------------
2893<4>[ 7.448333] c2 brcm_wlan_power Enter: power on
2894<6>[ 7.448376] c2 111brcm_wlan_power Enter: power on
2895<4>[ 7.448418] c2 gpio_table = [2]
2896<7>[ 7.448550] c2 WLAN: GPIO_WLAN_EN = 1
2897<4>[ 7.650071] c2 wifi_platform_bus_enumerate device present 1
2898<4>[ 7.650115] c2 gpio_table = [6]
2899<6>[ 7.650256] c2 mmc2: card inserted.
2900<6>[ 7.890373] c0 mmc2: cmd 52 command timeout error
2901<6>[ 7.890757] c0 mmc2: cmd 52 command timeout error
2902<6>[ 7.892841] c0 mmc2: cmd 8 command timeout error
2903<4>[ 7.908301] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
2904<4>[ 7.910924] c0 mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
2905<4>[ 7.913865] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
2906<4>[ 7.920639] c0 mmc2: queuing unknown CIS tuple 0x80 (19 bytes)
2907<6>[ 7.988566] c0 mmc2: new high speed SDIO card at address 0001
2908<4>[ 8.007666] c2 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
2909<4>[ 8.007914] c2 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
2910<4>[ 8.007984] c2 bus num (host idx)=2, slot num (rca)=1
2911<4>[ 8.008055] c2 found adapter info 'DHD generic adapter'
2912<4>[ 8.008257] c2 alloc static buf at e9280000!
2913<4>[ 8.020735] c0 F1 signature OK, socitype:0x1 chip:0x4334 rev:0x3 pkg:0x0
2914<4>[ 8.022809] c0 DHD: dongle ram size is set to 524288(orig 524288) at 0x0
2915<4>[ 8.024930] c0 wifi_platform_prealloc: failed to alloc static mem section 7
2916<4>[ 8.027130] c0 wl_create_event_handler(): thread:wl_event_handler:530 started
2917<6>[ 8.027218] c2 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe51e3608
2918<4>[ 8.038078] c0 p2p0: P2P Interface Registered
2919<4>[ 8.038381] c0 dhd_attach(): thread:dhd_watchdog_thread:536 started
2920<4>[ 8.038661] c0 dhd_attach(): thread:dhd_dpc:537 started
2921<4>[ 8.038764] c0 dhd_deferred_work_init: work queue initialized
2922<4>[ 8.039324] c0 Dongle Host Driver, version 1.141.44.4 (r)
2923<4>[ 8.039388] c0 Compiled in drivers/net/wireless/bcmdhd on Nov 5 2019 at 18:40:48
2924<6>[ 8.040148] c2 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
2925<6>[ 8.040738] c2 normal: free cpufreq_limit & interrupt enable.
2926<4>[ 8.050231] c0 Register interface [wlan0] MAC: 00:96:d7
2927<4>[ 8.050295] c0
2928<4>[ 8.050340] c0 dhd_prot_ioctl : bus is down. we have nothing to do
2929<4>[ 8.050424] c0 dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
2930<4>[ 8.050788] c0 wifi_platform_set_power = 0
2931<4>[ 8.050850] c0 ------------------------------------------------------------------------------------------------
2932<4>[ 8.050977] c0 brcm_wlan_power Enter: power off
2933<6>[ 8.051038] c0 111brcm_wlan_power Enter: power off
2934<4>[ 8.051105] c0 gpio_table = [2]
2935<7>[ 8.051164] c0 WLAN: GPIO_WLAN_EN = 0
2936<7>[ 8.060177] c2 hub 1-0:1.0: hub_suspend
2937<7>[ 8.060273] c2 usb usb1: bus auto-suspend
2938<7>[ 8.060335] c2 s5p-ehci s5p-ehci: suspend root hub
2939<7>[ 8.140143] c2 hub 2-0:1.0: hub_suspend
2940<7>[ 8.140226] c2 usb usb2: bus auto-suspend
2941<7>[ 8.140292] c2 s5p-ohci s5p-ohci: suspend root hub
2942<4>[ 8.161430] c0 Warning: unable to open an initial console.
2943<6>[ 8.161631] c0 Freeing init memory: 296K
2944<0>[ 8.163981] c1 Kernel panic - not syncing: Attempted to kill init!
2945<4>[ 8.164065] c1 Backtrace:
2946<4>[ 8.164171] c1 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
2947<4>[ 8.164277] c1 r7:e901a000 r6:c03882c0 r5:c08387ac r4:c0d2f0c0
2948<4>[ 8.164406] c1 [<c0838064>] (dump_stack+0x0/0x24) from [<c0838658>] (panic+0xb8/0x20c)
2949<4>[ 8.164540] c1 [<c08385a0>] (panic+0x0/0x20c) from [<c00a8da0>] (complete_and_exit+0x0/0x2c)
2950<4>[ 8.164638] c1 r3:c08385a0 r2:e902bdc8 r1:00000000 r0:c09f8d94
2951<4>[ 8.164742] c1 r7:e901a000
2952<4>[ 8.164817] c1 [<c00a841c>] (do_exit+0x0/0x984) from [<c00a8e2c>] (do_group_exit+0x48/0xe4)
2953<4>[ 8.164914] c1 r7:e902a000
2954<4>[ 8.164985] c1 [<c00a8de4>] (do_group_exit+0x0/0xe4) from [<c00b6b54>] (get_signal_to_deliver+0x34c/0x5fc)
2955<4>[ 8.165101] c1 r7:e902a000 r6:00106001 r5:e902bee8 r4:e902a000
2956<4>[ 8.165222] c1 [<c00b6808>] (get_signal_to_deliver+0x0/0x5fc) from [<c005c32c>] (do_signal+0x78/0x5b4)
2957<4>[ 8.165350] c1 [<c005c2b4>] (do_signal+0x0/0x5b4) from [<c005cbfc>] (do_notify_resume+0x68/0x74)
2958<4>[ 8.165475] c1 [<c005cb94>] (do_notify_resume+0x0/0x74) from [<c0058e98>] (work_pending+0x24/0x28)
2959<4>[ 8.165581] c1 r4:0000040f r3:00000000
2960<2>[ 8.165764] c3 CPU3: stopping
2961<4>[ 8.165812] c3 Backtrace:
2962<4>[ 8.165900] c3 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
2963<4>[ 8.166003] c3 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000003
2964<4>[ 8.166134] c3 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
2965<4>[ 8.166251] c3 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
2966<4>[ 8.166353] c3 Exception stack(0xe903def8 to 0xe903df40)
2967<4>[ 8.166427] c3 dee0: 1378f477 4f006794
2968<4>[ 8.166547] c3 df00: 038799e0 000e1e67 c0d2cbc8 c00d1268 c1fa31c0 c08499dc e903c000 c0825d04
2969<4>[ 8.166662] c3 df20: c00d94e0 e903df74 29aaaa6d e903df40 c00d1170 c006fe88 80000013 ffffffff
2970<4>[ 8.166792] c3 [<c006fe38>] (exynos4_enter_idle+0x0/0x1b0) from [<c05cb594>] (cpuidle_idle_call+0xa4/0x114)
2971<4>[ 8.166909] c3 r9:c0825d04 r8:e903c000 r7:c08499dc r6:c1fa31c0 r5:c0d70a50
2972<4>[ 8.167021] c3 r4:c1fa31d0
2973<4>[ 8.167087] c3 [<c05cb4f0>] (cpuidle_idle_call+0x0/0x114) from [<c0059f10>] (cpu_idle+0x118/0x14c)
2974<4>[ 8.167195] c3 r6:c0d2c3a4 r5:c00a5ec0 r4:c0c91d64 r3:c05cb4f0
2975<4>[ 8.167317] c3 [<c0059df8>] (cpu_idle+0x0/0x14c) from [<c0834688>] (secondary_start_kernel+0x1c0/0x1c8)
2976<4>[ 8.167447] c3 [<c08344c8>] (secondary_start_kernel+0x0/0x1c8) from [<40833f14>] (0x40833f14)
2977<4>[ 8.167549] c3 r6:10c0387d r5:00000015 r4:6907c06a r3:c0833efc
2978<2>[ 8.167654] c0 CPU0: stopping
2979<4>[ 8.167700] c0 Backtrace:
2980<4>[ 8.167797] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
2981<4>[ 8.167906] c0 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000000
2982<4>[ 8.168036] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
2983<4>[ 8.168153] c0 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
2984<4>[ 8.168253] c0 Exception stack(0xc0ad1eb8 to 0xc0ad1f00)
2985<4>[ 8.168326] c0 1ea0: 63582fcb 4f006794
2986<4>[ 8.168446] c0 1ec0: 038799cd 000e1e67 c0d2cbc8 c00d1268 c1f8b1c0 c08499dc c0ad0000 c0825d04
2987<4>[ 8.168563] c0 1ee0: c00d94e0 c0ad1f34 29aaaa6d c0ad1f00 c00d1170 c006fe88 80000013 ffffffff
2988<4>[ 8.168687] c0 [<c006fe38>] (exynos4_enter_idle+0x0/0x1b0) from [<c05cb594>] (cpuidle_idle_call+0xa4/0x114)
2989<4>[ 8.168801] c0 r9:c0825d04 r8:c0ad0000 r7:c08499dc r6:c1f8b1c0 r5:c0d70a50
2990<4>[ 8.168917] c0 r4:c1f8b1d0
2991<4>[ 8.168982] c0 [<c05cb4f0>] (cpuidle_idle_call+0x0/0x114) from [<c0059f10>] (cpu_idle+0x118/0x14c)
2992<4>[ 8.169087] c0 r6:c0d2c3a4 r5:c00a5ec0 r4:c0c91d64 r3:c05cb4f0
2993<4>[ 8.169209] c0 [<c0059df8>] (cpu_idle+0x0/0x14c) from [<c0825d00>] (rest_init+0xf4/0xf8)
2994<4>[ 8.169323] c0 [<c0825c0c>] (rest_init+0x0/0xf8) from [<c0008d6c>] (start_kernel+0x5d4/0x5e0)
2995<4>[ 8.169425] c0 r4:c0c89114 r3:c0825c0c
2996<4>[ 8.169507] c0 [<c0008798>] (start_kernel+0x0/0x5e0) from [<40008044>] (0x40008044)
2997<2>[ 8.169601] c2 CPU2: stopping
2998<4>[ 8.169648] c2 Backtrace:
2999<4>[ 8.169748] c2 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
3000<4>[ 8.169850] c2 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000002
3001<4>[ 8.169983] c2 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
3002<4>[ 8.170098] c2 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
3003<4>[ 8.170194] c2 Exception stack(0xe903bef8 to 0xe903bf40)
3004<4>[ 8.170268] c2 bee0: 1378f485 4f006794
3005<4>[ 8.170380] c2 bf00: 038799f0 000e1e67 c0d2cbc8 c00d1268 c1f9b1c0 c08499dc e903a000 c0825d04
3006<4>[ 8.170496] c2 bf20: c00d94e0 e903bf74 29aaaa6d e903bf40 c00d1170 c006fe88 80000013 ffffffff
3007<4>[ 8.170618] c2 [<c006fe38>] (exynos4_enter_idle+0x0/0x1b0) from [<c05cb594>] (cpuidle_idle_call+0xa4/0x114)
3008<4>[ 8.170731] c2 r9:c0825d04 r8:e903a000 r7:c08499dc r6:c1f9b1c0 r5:c0d70a50
3009<4>[ 8.170843] c2 r4:c1f9b1d0
3010<4>[ 8.170909] c2 [<c05cb4f0>] (cpuidle_idle_call+0x0/0x114) from [<c0059f10>] (cpu_idle+0x118/0x14c)
3011<4>[ 8.171013] c2 r6:c0d2c3a4 r5:c00a5ec0 r4:c0c91d64 r3:c05cb4f0
3012<4>[ 8.171138] c2 [<c0059df8>] (cpu_idle+0x0/0x14c) from [<c0834688>] (secondary_start_kernel+0x1c0/0x1c8)
3013<4>[ 8.171263] c2 [<c08344c8>] (secondary_start_kernel+0x0/0x1c8) from [<40833f14>] (0x40833f14)
3014<4>[ 8.171362] c2 r6:10c0387d r5:00000015 r4:6907006a r3:c0833efc
3015<6>[ 8.171483] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
3016<0>[ 8.171577] c1 Rebooting in 5 seconds..
3017<0>[ 10.661032] c1 sec_reboot (104, emergency)
3018
3019Samsung S-Boot 4.0 for GT-N8000 (May 18 2014 - 14:58:54)
3020
3021EXYNOS4412(EVT 1.1) / 2044MB / 0MB / Rev 6 / N8000XXUDNE4 /(PKG_ID 0x904f018)
3022
3023BOOTLOADER VERSION : N8000XXUDNE4
3024
3025BUCK1OUT(vdd_mif) = 0x04
3026BUCK3DVS1(vdd_int) = 0x28
3027cardtype: 0x00000007
3028SB_MMC_HS_52MHZ_1_8V_3V_IO
3029mmc->card_caps: 0x00000311
3030mmc->host_caps: 0x00000311
3031[mmc] capacity = 30777344
3032Current SBOOT version : VERSION_-+A2
3033- read_bl1
3034pit_check_signature (PIT) valid.
3035initialize_ddi_data: usable! (19:0xf)
3036[RPMB] emmc_rpmb_open:
3037Get DATA success.
3038[RPMB] emmc_rpmb_close:
3039initialize_rpmb_data: usable! (GT-N8000:VERSION_-+A2)
3040PARAM ENV VERSION: v1.0..
3041set_charger_state: charger disabled
3042fuel_gauge_read_vfsoc : VFSOC(6), data(0x06d9)
3043fuel_gauge_read_soc : SOC(9), data(0x0956)
3044init_fuelgauge: before: FCap(7064), RemCap(659), VFSOC(6), RepSOC(9)
3045init_fuelgauge: jig(0), dcin(1)
3046init_fuelgauge: CGAIN(0x377e)
3047check_battery_type: temper: fg(26), adc(26)
3048check_battery_type: SDI type
3049init_fuelgauge: not jiged state, DesignCap(0x4996)
3050set_fuel_gauge_parameter: battery_type = 1
3051init_fuelgauge: already initialized, SDI type
3052init_fuelgauge: bypass VFSOC_Patch, jig(0), dcin(1)
3053init_fuelgauge: bypass SOC compensation, jig(0), dcin(1)
3054check_temperture: temper: fg(26.7), adc(26)
3055fuel_gauge_read_vfsoc : VFSOC(6), data(0x06d9)
3056fuel_gauge_read_soc : SOC(9), data(0x0956)
3057init_fuelgauge: after: FCap(7064), RemCap(659), VFSOC(6), RepSOC(9)
3058set_charger_state: charger enabled
3059init_stmpe811
3060board_chipset_init: chargable state
3061get_stmpe811_adc: ch6: 0x0, 0
3062get_stmpe811_adc: ch6: 0x0, 0
3063get_stmpe811_adc: ch6: 0x0, 0
3064get_cable_type: avg adc: 0
3065get_cable_type: USB
3066set_chargcurr_high: smb347: set charge current as LOW(500mA)
3067set_charger_state: charger enabled
3068PMIC_ID = 0x02
3069PMIC_IRQSRC = 0x00
3070PMIC_IRQ1 = 0x00
3071PMIC_IRQ2 = 0x00
3072PMIC_IRQ1M = 0xff
3073PMIC_IRQ2M = 0xff
3074PMIC_STATUS1 = 0x16
3075PMIC_STATUS2 = 0x00
3076PMIC_PWRON = 0x09
3077PMIC_RTCINT = 0x11
3078PMIC_RTCINTM = 0x3f
3079s5p_check_keypad: 0x0
3080s5p_check_reboot_mode: INFORM3 = 0 ... skip
3081
3082
3083 Reserved secure RAM : 3145728
3084
3085s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
3086s5p_check_upload: debug level is 4f4c!
3087s5p_check_upload: level low or unknown: skip 0
3088s5p_check_download: 0
3089check_pm_status: acokb(0), dcinok(1), ta(1), jig(0)
3090check_pm_status: normal reset, do not enter LPM mode
3091scr_draw_image: draw 'logo.jpg'...
3092read 'logo.jpg'(52956) completed.
3093cmu_div:11, div:1, src_clk:800000000, pixel_clk:66663000
3094check_lcdtype : adc=2970, lctype=2
3095<start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
3096<start_checksum:483>offset:50, size:6296
3097<start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:16
3098Not Need Movinand Checksum
3099Movinand Checksum Confirmation Pass
3100[mobi_drv] add: 0x43e50fa0, size: 3933
3101MobiCore INIT response = 0
3102MobiCore RTM has initialized!
3103MobiCore IDLE flag = 0
3104MobiCore driver address 43e50fa0, size = 3933
3105MobiCore RTM Notified back!
3106MobiCore Driver loaded and RTM IDLE!
3107MobiCore RTM has been uninitialized!
3108load_kernel: loading boot image from 81920..
3109Verify_Binary_Signature: failed.
3110pit_check_signature (BOOT) invalid.
3111Set invalid sign flag
3112 No need to update kernel type.
3113
3114SMC Num = 0x83000001
3115
3116mobismc success!!! [ret = 0]
3117[s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A2, rpmb_version:VERSION_-+A2
3118rpmb_version:50, cur_version:50
3119ATAG_CORE: 5 54410001 0 0 0
3120ATAG_MEM: 4 54410002 20000000 40000000
3121ATAG_MEM: 4 54410002 20000000 60000000
3122ATAG_MEM: 4 54410002 20000000 80000000
3123ATAG_MEM: 4 54410002 1FC00000 A0000000
3124ATAG_SERIAL: 4 54410006 4dfc3d39 868641fb
3125ATAG_INITRD2: 4 54420005 42000000 3d8749
3126ATAG_REVISION: 3 54410007 6
3127ATAG_CMDLINE: a6 54410009 'console=ttySAC2,115200 loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2 consoleblank=0 lpj=3981312 vmalloc=256m oops=panic pmic_info=1 cordon=1d9e8d947e152d0a9cca0b505e64461a connie=GT-N8000_OPEN_EUR_710747859e062163c7e0fcde77c68859 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N8000XXUDNE4 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4dfc3d39868641fb snd_soc_core.pmdown_time=1000'
3128ATAG_NONE: 0 0
3129
3130Starting kernel at 0x40008000...
3131
3132switch_init: uart_sel(0)
3133<6>[ 0.000000] c0 Initializing cgroup subsys cpuset
3134<6>[ 0.000000] c0 Initializing cgroup subsys cpu
3135<5>[ 0.000000] c0 Linux version 3.0.101-HTML6405-N8000 (office@mhs-solutions.at) (gcc version 4.8 (GCC) ) #7 SMP PREEMPT Wed Nov 6 10:05:24 CET 2019
3136<4>[ 0.000000] c0 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
3137<4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
3138<4>[ 0.000000] c0 Machine: SMDK4x12
3139<6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 6b000000
3140<6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
3141<4>[ 0.000000] c0 CPU EXYNOS4412 (id 0xe4412211)
3142<7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
3143<6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
3144<3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
3145<3>[ 0.000000] c0 audiocdclk: no parent clock specified
3146<3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
3147<7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
3148<7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
3149<6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
3150<6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
3151<6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
3152<6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
3153<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
3154<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
3155<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
3156<6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
3157<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
3158<6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
3159<6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
3160<6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
3161<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
3162<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
3163<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
3164<6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
3165<6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 66666666
3166<6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
3167<6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 66666666
3168<6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
3169<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
3170<6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
3171<6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
3172<6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
3173<6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
3174<6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
3175<6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
3176<6>[ 0.000000] c0 S5P/CMA: Reserved 0x68000000/0x00c00000 for 'fimc_is'
3177<6>[ 0.000000] c0 S5P/CMA: Reserved 0x6a700000/0x00800000 for 'fimd'
3178<6>[ 0.000000] c0 S5P/CMA: Reserved 0x69b00000/0x00c00000 for 'fimc0'
3179<6>[ 0.000000] c0 S5P/CMA: Reserved 0x69a00000/0x00100000 for 'srp'
3180<6>[ 0.000000] c0 S5P/CMA: Reserved 0x65c00000/0x01810000 for 'fimc1'
3181<6>[ 0.000000] c0 S5P/CMA: Reserved 0x64000000/0x00a00000 for 'mfc-normal'
3182<6>[ 0.000000] c0 S5P/CMA: Reserving 0x8000000 for secure region aligned by 0x4000000.
3183<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5c000000/0x00200000 for 'sectbl'
3184<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5c200000/0x02e00000 for 'mfc-secure'
3185<6>[ 0.000000] c0 S5P/CMA: Reserved 0x5f000000/0x05000000 for 'ion'
3186<0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
3187<0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
3188<7>[ 0.000000] c0 On node 0 totalpages: 523264
3189<7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0d18020, node_mem_map c0d7c000
3190<7>[ 0.000000] c0 Normal zone: 1584 pages used for memmap
3191<7>[ 0.000000] c0 Normal zone: 0 pages reserved
3192<7>[ 0.000000] c0 Normal zone: 178640 pages, LIFO batch:31
3193<7>[ 0.000000] c0 HighMem zone: 3015 pages used for memmap
3194<7>[ 0.000000] c0 HighMem zone: 340025 pages, LIFO batch:31
3195<6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
3196<6>[ 0.000000] c0 PERCPU: Embedded 8 pages/cpu @c1f8b000 s9184 r8192 d15392 u32768
3197<7>[ 0.000000] c0 pcpu-alloc: s9184 r8192 d15392 u32768 alloc=8*4096
3198<7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
3199<6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 518665
3200<5>[ 0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 console=ttySAC2,115200 loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2 consoleblank=0 lpj=3981312 vmalloc=256m oops=panic pmic_info=1 cordon=1d9e8d947e152d0a9cca0b505e64461a connie=GT-N8000_OPEN_EUR_710747859e062163c7e0fcde77c68859 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N8000XXUDNE4 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4dfc3d39868641fb snd_soc_core.pmdown_time=1000
3201<6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:317b9 sec_log_buf:fd200000 sec_log_size:2097152
3202<6>[ 0.000000] c0 sec_log_save_old: saved old log at 202681@c1fab180
3203<6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
3204<6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
3205<6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
3206<6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
3207<6>[ 0.000000] c0 allocated 8372224 bytes of page_cgroup
3208<6>[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
3209<6>[ 0.000000] c0 Memory: 2044MB = 2044MB total
3210<5>[ 0.000000] c0 Memory: 1829272k/1829272k available, 263784k reserved, 1372160K highmem
3211<5>[ 0.000000] c0 Virtual kernel memory layout:
3212<5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
3213<5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
3214<5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
3215<5>[ 0.000000] c0 vmalloc : 0xec800000 - 0xfc000000 ( 248 MB)
3216<5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
3217<5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
3218<5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
3219<5>[ 0.000000] c0 .init : 0xc0008000 - 0xc0052000 ( 296 kB)
3220<5>[ 0.000000] c0 .text : 0xc0052000 - 0xc0ad0000 (10744 kB)
3221<5>[ 0.000000] c0 .data : 0xc0ad0000 - 0xc0d2c2a0 (2417 kB)
3222<5>[ 0.000000] c0 .bss : 0xc0d2c2c4 - 0xc0d7b938 ( 318 kB)
3223<6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
3224<6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
3225<6>[ 0.000000] c0 NR_IRQS:501
3226<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
3227<6>[ 0.000000] c0 Console: colour dummy device 80x30
3228<6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 796.26 BogoMIPS (lpj=3981312)
3229<6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
3230<6>[ 0.000000] c0 Security Framework initialized
3231<6>[ 0.000000] c0 AppArmor: AppArmor initialized
3232<6>[ 0.000000] c0 Mount-cache hash table entries: 512
3233<6>[ 0.000000] c0 Initializing cgroup subsys debug
3234<6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
3235<6>[ 0.000000] c0 Initializing cgroup subsys memory
3236<6>[ 0.000000] c0 Initializing cgroup subsys devices
3237<6>[ 0.000000] c0 Initializing cgroup subsys freezer
3238<6>[ 0.000000] c0 Initializing cgroup subsys blkio
3239<6>[ 0.000000] c0 Initializing cgroup subsys perf_event
3240<6>[ 0.000000] c0 Initializing cgroup subsys bfqio
3241<6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
3242<6>[ 0.000000] c0 CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
3243<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
3244<6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
3245<6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
3246<6>[ 0.000000] c0 L310 cache controller enabled
3247<6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
3248<4>[ 0.060000] c1 CPU1: Booted secondary processor
3249<4>[ 0.060000] c1 CPU1: Booted secondary processor
3250<6>[ 0.060000] c1 CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
3251<6>[ 0.060000] c1 notifier_call_chain : NOTIFY BAD tick_notify
3252<4>[ 0.120000] c2 CPU2: Booted secondary processor
3253<4>[ 0.120000] c2 CPU2: Booted secondary processor
3254<6>[ 0.120000] c2 CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
3255<6>[ 0.120000] c2 notifier_call_chain : NOTIFY BAD tick_notify
3256<4>[ 0.180000] c3 CPU3: Booted secondary processor
3257<4>[ 0.180000] c3 CPU3: Booted secondary processor
3258<6>[ 0.180000] c3 CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
3259<6>[ 0.180000] c3 notifier_call_chain : NOTIFY BAD tick_notify
3260<6>[ 0.200000] c0 Brought up 4 CPUs
3261<6>[ 0.200000] c0 SMP: Total of 4 processors activated (3185.04 BogoMIPS).
3262<6>[ 0.200000] c0 devtmpfs: initialized
3263<3>[ 0.200000] c0 gpio: GPK0 has missing PM functions
3264<6>[ 0.200000] c0 print_constraints: dummy:
3265<6>[ 0.210000] c0 NET: Registered protocol family 16
3266<7>[ 0.210000] c0 migrating range 6b000 6b280, retry (0)
3267<6>[ 0.260000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
3268<6>[ 0.260000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
3269<6>[ 0.260000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
3270<7>[ 0.260000] c0 midas_config_gpio_table
3271<6>[ 0.260000] c0 midas_power_init
3272<7>[ 0.260000] c0 [TSP] p4_tsp_init rev : 6
3273<7>[ 0.260000] c0 [TSP] TSP IC : Atmel
3274<6>[ 0.270000] c0 Registered chained gpio int handler for interrupt 110.
3275<6>[ 0.270000] c0 Registered interrupt support for gpio group 25.
3276<6>[ 0.270000] c0 Registered chained gpio int handler for interrupt 111.
3277<6>[ 0.270000] c0 Registered interrupt support for gpio group 4.
3278<6>[ 0.270000] c0 Sound: start midas_sound_init
3279<6>[ 0.270000] c0 midas_machine_init() register sii9234 driver
3280<7>[ 0.270000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=2
3281<6>[ 0.270000] c0 cam_cfg_init
3282<4>[ 0.270000] c0 brcm_wlan_init: start
3283<4>[ 0.270000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
3284<4>[ 0.270000] c0 -----------------------------------------------------
3285<4>[ 0.270000] c0 -----------------------------------------------------
3286<4>[ 0.270000] c0 -----------------------------------------------------
3287<4>[ 0.270000] c0 regist ret:0
3288<3>[ 0.270000] c0 ram_console: invalid start 0 or end 0
3289<6>[ 0.280000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
3290<6>[ 0.280000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
3291<6>[ 0.280000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
3292<6>[ 0.280000] c0 exynos4_pmu_init: PMU supports 4412(96)
3293<6>[ 0.280000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
3294<6>[ 0.280000] c0 EXYNOS4: Initializing architecture
3295<4>[ 0.280000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
3296<6>[ 0.280000] c0 s3c-adc samsung-adc-v4: attached adc driver
3297<6>[ 0.280000] c0 samsung-pd samsung-pd.0: power domain registered
3298<6>[ 0.280000] c0 samsung-pd samsung-pd.1: power domain registered
3299<6>[ 0.280000] c0 samsung-pd samsung-pd.2: power domain registered
3300<6>[ 0.280000] c0 lcd0 disable skip only one time
3301<6>[ 0.280000] c0 samsung-pd samsung-pd.5: power domain registered
3302<6>[ 0.280000] c0 samsung-pd samsung-pd.4: power domain registered
3303<6>[ 0.280000] c0 samsung-pd samsung-pd.6: power domain registered
3304<6>[ 0.280000] c0 samsung-pd samsung-pd.8: power domain registered
3305<6>[ 0.280000] c0 samsung-pd samsung-pd.7: power domain registered
3306<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
3307<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
3308<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
3309<6>[ 0.280000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
3310<6>[ 0.280000] c0 Switching to clocksource mct-frc
3311<6>[ 0.280817] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
3312<6>[ 0.280918] c0 Switched to NOHz mode on CPU #0
3313<6>[ 0.280974] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
3314<6>[ 0.281062] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
3315<6>[ 0.281144] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
3316<6>[ 0.281225] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
3317<6>[ 0.281304] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
3318<6>[ 0.281341] c2 Switched to NOHz mode on CPU #2
3319<6>[ 0.281370] c3 Switched to NOHz mode on CPU #3
3320<6>[ 0.281415] c1 Switched to NOHz mode on CPU #1
3321<6>[ 0.281450] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
3322<6>[ 0.281534] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
3323<6>[ 0.281617] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
3324<6>[ 0.281689] c0 s5p-sysmmu s5p-sysmmu.16: Initialized for exynos4-fimc-is.
3325<6>[ 0.281760] c0 s5p-sysmmu s5p-sysmmu.17: Initialized for exynos4-fimc-is.
3326<6>[ 0.281832] c0 s5p-sysmmu s5p-sysmmu.18: Initialized for exynos4-fimc-is.
3327<6>[ 0.281913] c0 s5p-sysmmu s5p-sysmmu.19: Initialized for exynos4-fimc-is.
3328<6>[ 0.319763] c0 bio: create slab <bio-0> at 0
3329<6>[ 0.320572] c0 print_constraints: VBATT: 5000 mV
3330<7>[ 0.320838] c0 max77686_pmic_init
3331<5>[ 0.322521] c0 SCSI subsystem initialized
3332<6>[ 0.322884] c0 usbcore: registered new interface driver usbfs
3333<6>[ 0.323227] c0 usbcore: registered new interface driver hub
3334<6>[ 0.323476] c0 usbcore: registered new device driver usb
3335<6>[ 0.324163] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
3336<6>[ 0.324573] c0 i2c-gpio i2c-gpio.13: using pins 266 (SDA) and 267 (SCL)
3337<6>[ 0.324980] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
3338<6>[ 0.325238] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
3339<6>[ 0.325473] c0 i2c-gpio i2c-gpio.16: using pins 91 (SDA) and 89 (SCL)
3340<6>[ 0.325876] c0 i2c-gpio i2c-gpio.17: using pins 258 (SDA) and 259 (SCL)
3341<6>[ 0.326305] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
3342<6>[ 0.326742] c0 i2c-gpio i2c-gpio.19: using pins 282 (SDA) and 281 (SCL)
3343<6>[ 0.326985] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
3344<6>[ 0.327496] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
3345<6>[ 0.327805] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
3346<6>[ 0.328267] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
3347<6>[ 0.328726] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
3348<6>[ 0.329199] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
3349<6>[ 0.329832] c0 max77686 7-0009: device found
3350<6>[ 0.330051] c0 max77686_irq_init+
3351<6>[ 0.330081] c0 max77686_irq_init: gpio_irq=1
3352<6>[ 0.335853] c0 max77686_irq_init-
3353<7>[ 0.336134] c0 max77686_pmic_probe
3354<7>[ 0.337051] c0 max77686_pmic_probe: DEVICE ID=0x2
3355<6>[ 0.340284] c0 print_constraints: vdd_mif range: 850 <--> 1050 mV at 1000 mV
3356<6>[ 0.340983] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
3357<6>[ 0.341660] c0 print_constraints: vdd_int range: 850 <--> 1100 mV at 1000 mV
3358<6>[ 0.342350] c0 print_constraints: vdd_g3d range: 850 <--> 1075 mV at 1000 mV
3359<6>[ 0.342619] c0 print_constraints: 3MP_CORE_1.2V: 1200 mV
3360<6>[ 0.343541] c0 print_constraints: VCC_1.8V_AP: 1800 mV
3361<6>[ 0.344196] c0 print_constraints: VCC_1.8V_IO: 1800 mV
3362<6>[ 0.345084] c0 print_constraints: VMIPI_1.0V: 1000 mV
3363<6>[ 0.345984] c0 print_constraints: VLED_IC_1.9V: 1950 mV
3364<6>[ 0.346907] c0 print_constraints: VMIPI_1.8V: 1800 mV
3365<6>[ 0.347814] c0 print_constraints: VABB1_1.9V: 1950 mV
3366<6>[ 0.348712] c0 print_constraints: VUOTG_3.0V: 3000 mV
3367<6>[ 0.349606] c0 print_constraints: VABB2_1.9V: 1950 mV
3368<6>[ 0.350286] c0 print_constraints: CAM_IO_1.8V: 1800 mV
3369<6>[ 0.350932] c0 print_constraints: VT_CORE_1.8V: 1800 mV
3370<6>[ 0.351579] c0 print_constraints: VTF_2.8V: 2800 mV
3371<6>[ 0.352484] c0 print_constraints: VDD_ADC_3.3V: 3300 mV
3372<6>[ 0.353142] c0 print_constraints: CAM_A2.8V: 2800 mV
3373<6>[ 0.353796] c0 print_constraints: VLED_3.3V: 3300 mV
3374<6>[ 0.354450] c0 print_constraints: 3MP_AF_2.8V: 2800 mV
3375<6>[ 0.354971] c0 print_constraints: 32KHZ_PMIC:
3376<6>[ 0.355308] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
3377<3>[ 0.355920] c0 max77686 5-0009: device not found on this channel (this is not an error)
3378<6>[ 0.355979] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
3379<6>[ 0.356320] c0 fg_i2c_probe: fuelgauge driver loading
3380<6>[ 0.356351] c0 Fuel gauge attach success!!!
3381<6>[ 0.356753] c0 fg_set_battery_type: DesignCAP(0x4996), Battery type(SDI)
3382<6>[ 0.358627] c0 fg_read_soc: soc(9), psoc(933), vfsoc(6)
3383<6>[ 0.412578] c0 [FG_Model]
3384<6>[ 0.420171] c0 0x7df0,
3385<6>[ 0.420189] c0 0xb500,
3386<6>[ 0.420207] c0 0xb860,
3387<6>[ 0.420223] c0 0xb930,
3388<6>[ 0.420240] c0 0xb980,
3389<6>[ 0.420257] c0 0xbb70,
3390<6>[ 0.420274] c0 0xbc00,
3391<6>[ 0.420291] c0 0xbc70,
3392<6>[ 0.420307] c0 0xbd20,
3393<6>[ 0.420324] c0 0xbdb0,
3394<6>[ 0.420341] c0 0xbef0,
3395<6>[ 0.420358] c0 0xc140,
3396<6>[ 0.420374] c0 0xc3c0,
3397<6>[ 0.420391] c0 0xc6e0,
3398<6>[ 0.420407] c0 0xcd20,
3399<6>[ 0.420424] c0 0xd100,
3400<6>[ 0.420441] c0 0x0020,
3401<6>[ 0.420458] c0 0x0340,
3402<6>[ 0.420475] c0 0x15d0,
3403<6>[ 0.420491] c0 0x2dd0,
3404<6>[ 0.420508] c0 0x0600,
3405<6>[ 0.420525] c0 0x18f0,
3406<6>[ 0.420541] c0 0x25a0,
3407<6>[ 0.420557] c0 0x1800,
3408<6>[ 0.420574] c0 0x22a0,
3409<6>[ 0.420591] c0 0x1670,
3410<6>[ 0.420608] c0 0x09a0,
3411<6>[ 0.420625] c0 0x08c0,
3412<6>[ 0.420641] c0 0x0b30,
3413<6>[ 0.420658] c0 0x04f0,
3414<6>[ 0.420675] c0 0x0870,
3415<6>[ 0.420691] c0 0x0870,
3416<6>[ 0.420708] c0 0x0200,
3417<6>[ 0.420725] c0 0x0200,
3418<6>[ 0.420741] c0 0x0200,
3419<6>[ 0.420758] c0 0x0200,
3420<6>[ 0.420774] c0 0x0200,
3421<6>[ 0.420791] c0 0x0200,
3422<6>[ 0.420808] c0 0x0200,
3423<6>[ 0.420824] c0 0x0200,
3424<6>[ 0.420841] c0 0x0200,
3425<6>[ 0.420858] c0 0x0200,
3426<6>[ 0.420875] c0 0x0200,
3427<6>[ 0.420892] c0 0x0200,
3428<6>[ 0.420908] c0 0x0200,
3429<6>[ 0.420925] c0 0x0200,
3430<6>[ 0.420941] c0 0x0200,
3431<6>[ 0.420958] c0 0x0200
3432<6>[ 0.428536] c0 [MAX17042] 1/1/1970 00:00,
3433<6>[ 0.434455] c0 0000h,ff00h,7f80h,ff01h,0000h,0527h,0956h,4ae7h,
3434<6>[ 0.434485] c0 1acch,b74ah,fdd8h,fdbbh,000ah,0701h,0950h,052dh,
3435<6>[ 0.465950] c0 3730h,121bh,7d5ah,0000h,0318h,0148h,1ac2h,00a9h,
3436<6>[ 0.465980] c0 4996h,b78fh,2114h,c87bh,2ed6h,2214h,0600h,0523h,
3437<6>[ 0.495925] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7ddeh,
3438<6>[ 0.495955] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
3439<6>[ 0.525921] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
3440<6>[ 0.525951] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,661bh,e000h,
3441<6>[ 0.555924] c0 a000h,2a50h,f723h,8a80h,b77bh,12eah,337eh,ffa9h,
3442<6>[ 0.555954] c0 0787h,fbc2h,050dh,8e00h,054dh,0521h,bdd5h,5bf7h,
3443<6>[ 0.585917] c0 0781h,1a1ch,00ffh,0008h,001ah,0005h,f93eh,ffffh,
3444<6>[ 0.585947] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
3445<6>[ 0.615916] c0 0000h,0000h,0000h,0000h,0000h,0000h,0701h,08e3h,
3446<6>[ 0.615947] c0 3eeeh,4cd5h,fcf0h,b8d8h,0070h,3910h,b732h,06d9h,
3447<6>[ 0.640042] c0
3448<6>[ 0.641121] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
3449<6>[ 0.642022] c0 Bluetooth: Core ver 2.16
3450<6>[ 0.642204] c0 NET: Registered protocol family 31
3451<6>[ 0.642235] c0 Bluetooth: HCI device and connection manager initialized
3452<6>[ 0.642276] c0 Bluetooth: HCI socket layer initialized
3453<6>[ 0.642307] c0 Bluetooth: L2CAP socket layer initialized
3454<6>[ 0.642356] c0 Bluetooth: SCO socket layer initialized
3455<6>[ 0.642848] c0 cfg80211: Calling CRDA to update world regulatory domain
3456<6>[ 0.643073] c0 NetLabel: Initializing
3457<6>[ 0.643099] c0 NetLabel: domain hash size = 128
3458<6>[ 0.643126] c0 NetLabel: protocols = UNLABELED CIPSOv4
3459<6>[ 0.643193] c0 NetLabel: unlabeled traffic allowed by default
3460<6>[ 0.643793] c0 AppArmor: AppArmor Filesystem Enabled
3461<6>[ 0.660366] c0 NET: Registered protocol family 2
3462<6>[ 0.660639] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
3463<6>[ 0.661494] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
3464<6>[ 0.663398] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
3465<6>[ 0.664422] c0 TCP: Hash tables configured (established 131072 bind 65536)
3466<6>[ 0.664461] c0 TCP reno registered
3467<6>[ 0.664489] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
3468<6>[ 0.664551] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
3469<6>[ 0.665008] c0 NET: Registered protocol family 1
3470<6>[ 0.665388] c0 RPC: Registered named UNIX socket transport module.
3471<6>[ 0.665425] c0 RPC: Registered udp transport module.
3472<6>[ 0.665455] c0 RPC: Registered tcp transport module.
3473<6>[ 0.665484] c0 RPC: Registered tcp NFSv4.1 backchannel transport module.
3474<6>[ 0.665688] c0 Trying to unpack rootfs image as initramfs...
3475<6>[ 0.907998] c0 Freeing initrd memory: 3936K
3476<6>[ 0.908132] c0 PMU: registered new PMU device of type 0
3477<6>[ 0.908401] c0 Exynos4 : ARM Clock down on idle mode is enabled
3478<6>[ 0.910588] c0 init_gpio: uart_sel(0)
3479<6>[ 0.910812] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
3480<6>[ 0.911020] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
3481<6>[ 0.911230] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
3482<6>[ 0.911439] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
3483<6>[ 0.911647] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
3484<7>[ 0.912251] c0 gps_bcm475x_init - system_rev : 6
3485<6>[ 0.912282] c0 accel_gpio_init
3486<6>[ 0.912306] c0 gyro_gpio_init
3487<6>[ 0.912508] c0 i2c 1-0019: i2c_add_devices - added lsm330dlc_accel successfully
3488<6>[ 0.912718] c0 i2c 1-006b: i2c_add_devices - added lsm330dlc_gyro successfully
3489<6>[ 0.912933] c0 i2c 9-0023: i2c_add_devices - added bh1721fvc successfully
3490<6>[ 0.913138] c0 i2c 9-001c: i2c_add_devices - added AL3201 successfully
3491<6>[ 0.913176] c0 ak8975c_gpio_init
3492<6>[ 0.913217] c0 Registered interrupt support for gpio group 27.
3493<6>[ 0.913428] c0 i2c 10-000c: i2c_add_devices - added ak8975 successfully
3494<6>[ 0.914511] c0 wake enabled for irq 374
3495<6>[ 0.914752] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
3496<7>[ 0.915304] c0 migrating range 6b280 6b281, retry (0)
3497<6>[ 0.939802] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
3498<6>[ 0.939838] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
3499<7>[ 0.940101] c0 migrating range 6b281 6b282, retry (0)
3500<6>[ 0.964325] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
3501<6>[ 0.964362] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
3502<7>[ 0.964581] c0 migrating range 6b282 6b283, retry (0)
3503<6>[ 0.988879] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
3504<6>[ 0.988917] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
3505<6>[ 0.989298] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3506<6>[ 0.989471] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3507<6>[ 0.989948] c0 futex hash table entries: 1024 (order: 3, 32768 bytes)
3508<4>[ 1.003321] c0 highmem bounce pool size: 64 pages
3509<6>[ 1.003711] c0 ashmem: initialized
3510<6>[ 1.016807] c0 exFAT: Core Version 1.2.19
3511<6>[ 1.016836] c0 exFAT: FS Version 1.2.19
3512<6>[ 1.020449] c0 fuse init (API version 7.16)
3513<6>[ 1.021442] c0 msgmni has been set to 932
3514<6>[ 1.021757] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3515<6>[ 1.021902] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3516<6>[ 1.022043] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3517<6>[ 1.022189] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3518<6>[ 1.022328] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3519<6>[ 1.022463] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3520<6>[ 1.022601] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3521<6>[ 1.022746] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3522<6>[ 1.023007] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3523<6>[ 1.023163] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3524<6>[ 1.023351] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3525<6>[ 1.023998] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3526<6>[ 1.024174] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3527<6>[ 1.024208] c2 FIPS: No test for stdrng (krng)
3528<6>[ 1.024265] c0 io scheduler noop registered
3529<6>[ 1.024292] c0 io scheduler deadline registered
3530<6>[ 1.024677] c0 io scheduler bfq registered
3531<6>[ 1.024734] c0 io scheduler row registered
3532<6>[ 1.025034] c0 io scheduler cfq registered (default)
3533<6>[ 1.025068] c0 io scheduler sio registered
3534<6>[ 1.025094] c0 io scheduler zen registered
3535<6>[ 1.025151] c0 io scheduler fiops registered
3536<6>[ 1.025179] c0 io scheduler tripndroid registered
3537<6>[ 1.025409] c0 s3cfb s3cfb.0: vclk=66663000, div=12(11), rate=72727272
3538<6>[ 1.025542] c0 set mdnie_pwm sclk rate to 2181818
3539<6>[ 1.025574] c0 set mdnie_pwm sclk rate to 12000000
3540<6>[ 1.025608] c0 s3cfb s3cfb.0: fimd sclk rate 66666666, clkdiv 0xff1bbb
3541<6>[ 1.026016] c0 s3cfb s3cfb.0: [fb2] dma: 0x6a700000, cpu: 0xec899000, size: 0x007d0000
3542<6>[ 1.029938] c0 sec_getlog_supply_fbinfo: 0x6a700000 1280 800 32 2
3543<6>[ 1.036487] c0 Bootloader sent 'bootloaderfb' : 5EC00000
3544<6>[ 1.037682] c0 s3cfb s3cfb.0: parent clock: 66666666, vclk: 66666000, vclk div: 1
3545<6>[ 1.037829] c0 s3cfb s3cfb.0: registered successfully
3546<6>[ 1.038293] c0 lcd panel: lcd panel driver has been probed.
3547<6>[ 1.038990] c0 mdnie mdnie: lcdtype = 2
3548<6>[ 1.039026] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI
3549<6>[ 1.039067] c0 mdnie mdnie: registered successfully
3550<6>[ 1.039590] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
3551<6>[ 1.041233] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
3552<6>[ 1.041583] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
3553<6>[ 1.041917] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
3554<6>[ 1.042242] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
3555<4>[ 1.043363] c0 Mali: ::Q::exynos_result_of_asv : 0
3556<4>[ 1.043396] c0 Mali: mali_dvfs[0].vol = 950000
3557<4>[ 1.043425] c0 Mali: mali_dvfs[1].vol = 975000
3558<4>[ 1.043455] c0 Mali: mali_runtime_resume.vol = 975000
3559<4>[ 1.043486] c0 Mali: mali_dvfs[2].vol = 1050000
3560<4>[ 1.043517] c0 Mali: mali_dvfs[3].vol = 1100000
3561<4>[ 1.043547] c0 Mali: init_gpu_vol = 1100000
3562<4>[ 1.043950] c0 Mali: Mali frequency 440
3563<4>[ 1.043977] c0 Mali: init_mali_clock mali_clock c0c941c0
3564<4>[ 1.044189] c0 Mali: = regulator_set_voltage: 1100000, 1100000
3565<4>[ 1.044557] c0 Mali: Mali frequency 440
3566<7>[ 1.045051] c0 migrating range 6b300 6bb00, retry (0)
3567<4>[ 1.087361] c0 Mali: Mali device driver loaded
3568<4>[ 1.087745] c0 UMP: UMP device driver 0000 loaded
3569<6>[ 1.096540] c0 brd: module loaded
3570<6>[ 1.100928] c0 loop: module loaded
3571<6>[ 1.100969] c0 lkdtm: No crash points registered, enable through debugfs
3572<6>[ 1.101688] c0 stmpe811_adc_i2c_probe: stmpe811 adc driver loading
3573<6>[ 1.102309] c0 stmpe811_reg_init: ret: 0
3574<6>[ 1.102339] c0 stmpe811_reg_init: STMPE811_CHIP_ID(0x811)
3575<6>[ 1.102674] c0 stmpe811_reg_init: STMPE811_ID_VER(0x3)
3576<6>[ 1.103306] c0 stmpe811_reg_init: STMPE811_SYS_CTRL2(0x6)
3577<6>[ 1.103937] c0 stmpe811_reg_init: STMPE811_INT_EN(0x0)
3578<6>[ 1.104567] c0 stmpe811_reg_init: STMPE811_ADC_CTRL1(0x3c)
3579<6>[ 1.105199] c0 stmpe811_reg_init: STMPE811_ADC_CTRL2(0x3)
3580<6>[ 1.105829] c0 stmpe811_reg_init: STMPE811_GPIO_AF(0x0)
3581<6>[ 1.106459] c0 stmpe811_reg_init: STMPE811_TSC_CTRL(0x10)
3582<6>[ 1.107020] c0 stmpe811 adc(id 0x811) initialized
3583<6>[ 1.107277] c0 sec_jack_probe : Registering jack driver
3584<6>[ 1.108492] c0 wake enabled for irq 355
3585<6>[ 1.109142] c0 print_constraints: WM1811 LDO1: at 3000 mV
3586<6>[ 1.109618] c0 print_constraints: WM1811 LDO2: at 1050 mV
3587<6>[ 1.125201] c0 wm8994 4-001a: Succeeded to read ID register
3588<6>[ 1.127192] c0 wm8994 4-001a: WM1811 revision C CUST_ID 00
3589<4>[ 1.130810] c0 wm8994 4-001a: No interrupt specified, no interrupts
3590<6>[ 1.132936] c0 PPP generic driver version 2.4.2
3591<6>[ 1.133355] c0 PPP Deflate Compression module registered
3592<6>[ 1.133389] c0 PPP BSD Compression module registered
3593<6>[ 1.135224] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3594<6>[ 1.135297] c2 notifier_call_chain : NOTIFY BAD cryptomgr_notify
3595<6>[ 1.135568] c0 PPP MPPE Compression module registered
3596<6>[ 1.135602] c0 NET: Registered protocol family 24
3597<6>[ 1.135633] c0 tun: Universal TUN/TAP device driver, 1.6
3598<6>[ 1.135667] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
3599<6>[ 1.136222] c0 host_notifier host_notifier.0: notifier_prove
3600<6>[ 1.136978] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
3601<7>[ 1.137021] c0 ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
3602<6>[ 1.137261] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
3603<7>[ 1.137300] c0 ohci_hcd: block sizes: ed 64 td 64
3604<6>[ 1.137705] c0 usbcore: registered new interface driver usblp
3605<6>[ 1.137741] c0 Initializing USB Mass Storage driver...
3606<6>[ 1.137929] c0 usbcore: registered new interface driver usb-storage
3607<6>[ 1.137965] c0 USB Mass Storage support registered.
3608<6>[ 1.138296] c0 usbcore: registered new interface driver usbserial
3609<6>[ 1.138332] c0 usbserial: USB Serial Driver core
3610<6>[ 1.138491] c0 USB Serial support registered for pl2303
3611<6>[ 1.138670] c0 usbcore: registered new interface driver pl2303
3612<6>[ 1.138705] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
3613<7>[ 1.139053] c0 migrating range 6b283 6b284, retry (0)
3614<6>[ 1.165248] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
3615<6>[ 1.165291] c0 s3c-udc : version 15 March 2009
3616<7>[ 1.165321] c0 init
3617<7>[ 1.165994] c0 usb: android_bind disconnect
3618<7>[ 1.166022] c0 usb: usb_gadget_disconnect
3619<7>[ 1.168314] c0 usb: usb_string_id cdev(0xe90946c0)->next_string_id=1
3620<6>[ 1.168571] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
3621<6>[ 1.168613] c0 android_usb gadget: Number of LUNs=4
3622<6>[ 1.168645] c0 lun0: LUN: removable file: (no medium)
3623<6>[ 1.168677] c0 lun1: LUN: removable file: (no medium)
3624<6>[ 1.168708] c0 lun2: LUN: removable file: (no medium)
3625<6>[ 1.168743] c0 lun3: LUN: removable file: (no medium)
3626<7>[ 1.169957] c0 usb: usb_string_id cdev(0xe90946c0)->next_string_id=2
3627<7>[ 1.169997] c0 usb: usb_string_id cdev(0xe90946c0)->next_string_id=3
3628<7>[ 1.170070] c0 usb: usb_string_id cdev(0xe90946c0)->next_string_id=4
3629<7>[ 1.170108] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
3630<7>[ 1.170141] c0 usb: composite_bind bcdDevice=0x0
3631<7>[ 1.170169] c0 usb: composite_bind composite_manufacturer=
3632<6>[ 1.170208] c0 android_usb gadget: android_usb ready
3633<6>[ 1.170236] c0 usb: Skip udc_enable
3634<6>[ 1.170708] c0 mousedev: PS/2 mouse device common for all mice
3635<6>[ 1.171462] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
3636<7>[ 1.171741] c0 [keys]PWR 0
3637<6>[ 1.172484] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-004a/input/input1
3638<3>[ 1.230041] c0 mxt_power_on is finished
3639<6>[ 1.540440] c0 Atmel MXT1664S 3-004a: family: 0xa2 variant: 0x0 version: 0x10 build: 0xaa matrix X,Y size: 32,52 number of obect: 24
3640<6>[ 1.544964] c0 Atmel MXT1664S 3-004a: maXTouch: 24 Objects
3641<6>[ 1.545001] c0 Atmel MXT1664S 3-004a: maXTouch: 56 report ID
3642<6>[ 1.880316] c0 s5p_gpioint_set_type irq:387 is at GPM2(3)
3643<6>[ 1.880773] c0 Atmel MXT1664S 3-004a: Mxt touch success initialization
3644<6>[ 1.880845] c2 Atmel MXT1664S 3-004a: calibration is on going !!
3645<6>[ 1.881135] c2 Atmel MXT1664S 3-004a: reset is ongoing
3646<6>[ 1.882444] c2 Atmel MXT1664S 3-004a: normal mode
3647<6>[ 1.883111] c0 max77686_rtc_probe
3648<6>[ 1.910216] c0 max77686-rtc max77686-rtc: max77686_rtc_init_reg: bypass init
3649<6>[ 1.940396] c0 max77686_rtc_read_time: 112/0/1 14:3:12(0)
3650<6>[ 1.970385] c0 max77686_rtc_read_alarm: 100/0/1 0:0:0(0)
3651<6>[ 1.971099] c0 using rtc device, max77686-rtc, for alarms
3652<6>[ 1.971159] c0 max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
3653<6>[ 1.971207] c0 max77686_irq_unmask: group=2, cur=0xfd
3654<4>[ 1.971837] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
3655<6>[ 1.972296] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
3656<6>[ 1.972533] c0 i2c /dev entries driver
3657<6>[ 1.976238] c0 Linux media interface: v0.10
3658<6>[ 1.976738] c0 lirc_dev: IR Remote Control driver registered, major 247
3659<6>[ 1.976777] c0 IR NEC protocol handler initialized
3660<6>[ 1.976809] c0 IR RC5(x) protocol handler initialized
3661<6>[ 1.976839] c0 IR RC6 protocol handler initialized
3662<6>[ 1.976867] c0 IR JVC protocol handler initialized
3663<6>[ 1.976894] c0 IR Sony protocol handler initialized
3664<6>[ 1.976922] c0 IR RC5 (streamzap) protocol handler initialized
3665<6>[ 1.976955] c0 IR LIRC bridge handler initialized
3666<6>[ 1.976983] c0 Linux video capture interface: v2.00
3667<6>[ 1.977146] c0 v4l2_i2c_drv_init: ISX012 called
3668<6>[ 1.977845] c0 [INFO]flite_probe:2121: FIMC-LITE0 probe success
3669<6>[ 1.977913] c0 [INFO]flite_probe:2121: FIMC-LITE1 probe success
3670<6>[ 1.978237] c0 fimc_is_init_mem_mgr : [cma_info] start_addr : 0x68000000, end_addr : 0x68c00000, total_size : 0xc00000, free_size : 0xc00000
3671<6>[ 1.978366] c0 ctrl->mem.base = 0x68000000
3672<6>[ 1.978392] c0 ctrl->mem.size = 0xc00000
3673<6>[ 1.978416] c0 ctrl->mem.fw_ref_base = 0x68a01000
3674<6>[ 1.978444] c0 ctrl->mem.setfile_ref_base = 0x68b81000
3675<6>[ 1.978937] c0 FIMC-IS probe completed
3676<6>[ 1.979222] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
3677<6>[ 1.979296] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
3678<2>[ 1.979504] c0 Initialize JPEG driver
3679<6>[ 1.979910] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
3680<6>[ 1.980199] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
3681<4>[ 1.980482] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
3682<6>[ 1.980802] c0 s5p_int_src_ext_hpd()
3683<6>[ 1.980831] c0 s5p_hpd_read_gpio(0)
3684<6>[ 1.981029] c0 s5p_hpd_read_gpio(0)
3685<6>[ 1.981692] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
3686<4>[ 1.981868] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
3687<4>[ 1.981906] c0 i2c-core: driver [s5p_ddc] using legacy resume method
3688<6>[ 1.982169] c0 mfc_init_mem_mgr[581] cma 0x5c200000 0x5f000000 0x2e00000 0x2e00000 1
3689<6>[ 1.982683] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
3690<6>[ 1.983388] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
3691<6>[ 1.983788] c0 sii9234_cfg_gpio()
3692<6>[ 1.983836] c0 Registered interrupt support for gpio group 10.
3693<6>[ 1.983874] c0 s5p_gpioint_set_type irq:413 is at GPF3(5)
3694<6>[ 1.983912] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
3695<6>[ 1.984167] c0 s5p_gpioint_set_type irq:413 is at GPF3(5)
3696<6>[ 1.984292] c0 sii9234 : create mhl sysfile
3697<6>[ 1.984944] c0 input: sii9234_rcp as /devices/virtual/input/input2
3698<6>[ 1.985965] c0 smb347_i2c_probe : smb347 Charger Driver Loading
3699<6>[ 1.986001] c0 register callback functions!
3700<6>[ 1.986027] c0 smb347 charger initialized.
3701<6>[ 1.986867] c0 device-mapper: uevent: version 1.0.3
3702<6>[ 1.987440] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
3703<6>[ 1.988423] c0 cpuidle: using governor ladder
3704<6>[ 1.989671] c0 cpuidle: using governor menu
3705<6>[ 1.989835] c0 mshci: Mobile Storage Host Controller Interface driver
3706<6>[ 1.989872] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
3707<6>[ 1.990091] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (40000000 Hz)
3708<3>[ 1.990269] c0 mmc0: Version ID 0x5342240a.
3709<6>[ 1.990421] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
3710<6>[ 1.991325] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
3711<6>[ 1.991654] c0 sdhci: Secure Digital Host Controller Interface driver
3712<6>[ 1.991692] c0 sdhci: Copyright(c) Pierre Ossman
3713<6>[ 1.991840] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
3714<6>[ 1.992119] c0 mmc1: vtf_2.8v regulator found
3715<7>[ 1.992327] c0 Registered led device: mmc1::
3716<6>[ 1.993158] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
3717<6>[ 1.993211] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
3718<6>[ 1.993441] c0 wake enabled for irq 380
3719<6>[ 1.993471] c0 mmc1: card removed.
3720<6>[ 1.993595] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
3721<3>[ 1.993682] c0 mmc2: no vmmc regulator found
3722<7>[ 1.993894] c0 Registered led device: mmc2::
3723<6>[ 1.994134] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
3724<6>[ 2.002375] c0 usbcore: registered new interface driver usbhid
3725<6>[ 2.002410] c0 usbhid: USB HID core driver
3726<3>[ 2.030844] c0 mmc0: cmd 52 response timeout error
3727<3>[ 2.031693] c0 mmc0: cmd 52 response timeout error
3728<4>[ 2.033723] c0 i2c-core: driver [isa1200_vibrator] using legacy suspend method
3729<4>[ 2.033765] c0 i2c-core: driver [isa1200_vibrator] using legacy resume method
3730<6>[ 2.033864] c0 lsm330dlc_accel_probe: is started
3731<3>[ 2.034240] c0 mmc0: cmd 8 response timeout error
3732<3>[ 2.035094] c0 mmc0: cmd 5 response timeout error
3733<6>[ 2.035482] c0 Registered sensors device: accelerometer_sensor
3734<6>[ 2.035537] c0 lsm330dlc_accel_probe: successful, position = 4
3735<6>[ 2.035779] c0 lsm330dlc_gyro_probe, started
3736<3>[ 2.035925] c0 mmc0: cmd 5 response timeout error
3737<6>[ 2.036266] c0 input: gyro_sensor as /devices/virtual/input/input3
3738<3>[ 2.036760] c0 mmc0: cmd 5 response timeout error
3739<6>[ 2.036809] c0 Registered sensors device: gyro_sensor
3740<6>[ 2.036862] c0 lsm330dlc_gyro_probe, position = 4
3741<6>[ 2.036894] c0 lsm330dlc_gyro_probe, successful
3742<6>[ 2.037120] c0 akm8975_probe is called.
3743<6>[ 2.037299] c0 s5p_gpioint_set_type irq:407 is at GPM4(7)
3744<3>[ 2.037596] c0 mmc0: cmd 5 response timeout error
3745<6>[ 2.038085] c0 akm8975_probe: asa_x = 172, asa_y = 171, asa_z = 183
3746<6>[ 2.038422] c0 Registered sensors device: magnetic_sensor
3747<3>[ 2.038459] c0 mmc0: cmd 55 response timeout error
3748<6>[ 2.038527] c0 akm8975_probe is successful.
3749<6>[ 2.038737] c0 bh1721fvc_probe: is started!
3750<3>[ 2.039304] c0 mmc0: cmd 55 response timeout error
3751<3>[ 2.039963] c0 bh1721fvc_probe: No search bh1721fvc lightsensor!
3752<4>[ 2.040007] c0 bh1721fvc: probe of 9-0023 failed with error -5
3753<3>[ 2.040151] c0 mmc0: cmd 55 response timeout error
3754<6>[ 2.040272] c0 al3201_probe: start
3755<3>[ 2.040998] c0 mmc0: cmd 55 response timeout error
3756<6>[ 2.043693] c0 input: light_sensor as /devices/virtual/input/input4
3757<6>[ 2.044140] c0 Registered sensors device: light_sensor
3758<6>[ 2.044189] c0 al3201_probe: success!
3759<6>[ 2.044763] c0 input: sec_keyboard as /devices/platform/sec_keyboard/input/input5
3760<6>[ 2.045558] c0 ir_remocon_probe start!
3761<6>[ 2.061769] c0 mmc0: VTU00M: 15010056545530304dfc3d39868641fb
3762<4>[ 2.100203] c0 ------------[ cut here ]------------
3763<4>[ 2.100250] c0 WARNING: at ../../../../../../kernel/samsung/html6405/drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x6c/0x15c()
3764<4>[ 2.100311] c0 autorequest GPIO-116
3765<4>[ 2.100333] c0 Modules linked in:
3766<4>[ 2.100356] c0 Backtrace:
3767<4>[ 2.100397] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
3768<4>[ 2.100444] c0 r7:c0398ee0 r6:00000009 r5:e902bd60 r4:c08387ac
3769<4>[ 2.100503] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c00a391c>] (warn_slowpath_common+0x80/0x90)
3770<4>[ 2.100560] c0 [<c00a389c>] (warn_slowpath_common+0x0/0x90) from [<c00a3964>] (warn_slowpath_fmt+0x38/0x40)
3771<4>[ 2.100611] c0 r9:c0d719fc r8:00000003 r7:00000074 r6:c0d53f90 r5:c0cc8050
3772<4>[ 2.100661] c0 r4:c0d53f94
3773<4>[ 2.100691] c0 [<c00a392c>] (warn_slowpath_fmt+0x0/0x40) from [<c0398ee0>] (gpio_ensure_requested+0x6c/0x15c)
3774<4>[ 2.100748] c0 r3:00000074 r2:c0a33138
3775<4>[ 2.100785] c0 [<c0398e74>] (gpio_ensure_requested+0x0/0x15c) from [<c03991d0>] (gpio_direction_output+0xac/0x15c)
3776<4>[ 2.100838] c0 r9:c0d719fc r8:00000001 r7:20000013 r6:c0cc8050 r5:00000003
3777<4>[ 2.100888] c0 r4:c0d53a20
3778<4>[ 2.100920] c0 [<c0399124>] (gpio_direction_output+0x0/0x15c) from [<c0073c28>] (irda_wake_en+0x24/0x48)
3779<4>[ 2.100980] c0 [<c0073c04>] (irda_wake_en+0x0/0x48) from [<c083193c>] (ir_remocon_probe+0x1c0/0x854)
3780<4>[ 2.101029] c0 r4:e51f9000 r3:c0073c04
3781<4>[ 2.101069] c0 [<c083177c>] (ir_remocon_probe+0x0/0x854) from [<c0538778>] (i2c_device_probe+0xb4/0x10c)
3782<4>[ 2.101129] c0 [<c05386c4>] (i2c_device_probe+0x0/0x10c) from [<c0402fd8>] (driver_probe_device+0xa0/0x1ec)
3783<4>[ 2.101181] c0 r9:00000000 r8:00000000 r7:c0ceb108 r6:c0ceb108 r5:c0d56eb8
3784<4>[ 2.101232] c0 r4:e96d4420
3785<4>[ 2.101261] c0 [<c0402f38>] (driver_probe_device+0x0/0x1ec) from [<c0403218>] (__driver_attach+0xa8/0xac)
3786<4>[ 2.101311] c0 r8:00000000 r7:e96d4454 r6:c0ceb108 r5:c08432b8 r4:e96d4420
3787<4>[ 2.101360] c0 r3:00000000
3788<4>[ 2.101389] c0 [<c0403170>] (__driver_attach+0x0/0xac) from [<c04016bc>] (bus_for_each_dev+0x78/0xb4)
3789<4>[ 2.101438] c0 r7:c0403170 r6:c0ceb108 r5:c08258e4 r4:00000000
3790<4>[ 2.101489] c0 [<c0401644>] (bus_for_each_dev+0x0/0xb4) from [<c0402be4>] (driver_attach+0x2c/0x30)
3791<4>[ 2.101539] c0 r7:e94b7060 r6:c0cd8528 r5:c0ceb108 r4:c0ceb108
3792<4>[ 2.101591] c0 [<c0402bb8>] (driver_attach+0x0/0x30) from [<c04026d8>] (bus_add_driver+0xec/0x2fc)
3793<4>[ 2.101646] c0 [<c04025ec>] (bus_add_driver+0x0/0x2fc) from [<c0403a58>] (driver_register+0xa0/0x1b4)
3794<4>[ 2.101704] c0 [<c04039b8>] (driver_register+0x0/0x1b4) from [<c053aedc>] (i2c_register_driver+0x40/0xe0)
3795<4>[ 2.101756] c0 r9:00000000 r8:00000000 r7:e902a000 r6:c0d2c2e0 r5:c0049d50
3796<4>[ 2.101806] c0 r4:c0ceb0e0
3797<4>[ 2.101836] c0 [<c053ae9c>] (i2c_register_driver+0x0/0xe0) from [<c0035f78>] (ir_remocon_init+0x20/0x28)
3798<4>[ 2.101886] c0 r4:c00499e4 r3:c053ae9c
3799<4>[ 2.101925] c0 [<c0035f58>] (ir_remocon_init+0x0/0x28) from [<c0052ac4>] (do_one_initcall+0x154/0x1c4)
3800<4>[ 2.101983] c0 [<c0052970>] (do_one_initcall+0x0/0x1c4) from [<c0008f34>] (kernel_init+0x1bc/0x27c)
3801<4>[ 2.102046] c0 [<c0008d78>] (kernel_init+0x0/0x27c) from [<c00a841c>] (do_exit+0x0/0x984)
3802<4>[ 2.102090] c0 r7:00000013 r6:c00a841c r5:c0008d78 r4:00000000
3803<4>[ 2.102145] c0 ---[ end trace d382f095d464fead ]---
3804<3>[ 2.102208] c0 irda_wake_en: irda_wake_en : 1
3805<6>[ 2.154074] c0 mmc0 : 10 : 0c : 20130128 : 20141021.
3806<6>[ 2.154112] c0 mmc0 : disable PON feature : 10 : 0c : 20130128
3807<4>[ 2.164109] c0 mmc0: Voltage range not supported for power class.
3808<3>[ 2.164146] c0 mmc0: power class selection to bus width 8 failed
3809<4>[ 2.164328] c0 mmc0: Voltage range not supported for power class.
3810<3>[ 2.164366] c0 mmc0: power class selection to bus width 8 ddr 2 failed
3811<6>[ 2.164577] c0 mmc0: new high speed DDR MMC card at address 0001
3812<6>[ 2.165107] c0 mmcblk0: mmc0:0001 VTU00M 14.6 GiB
3813<4>[ 2.166057] c0 ------------[ cut here ]------------
3814<4>[ 2.166107] c0 WARNING: at ../../../../../../kernel/samsung/html6405/block/blk.h:225 get_task_io_context+0xf8/0x104()
3815<4>[ 2.166162] c0 Modules linked in:
3816<4>[ 2.166185] c0 Backtrace:
3817<4>[ 2.166223] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
3818<4>[ 2.166270] c0 r7:c035fddc r6:00000009 r5:00000000 r4:c08387ac
3819<4>[ 2.166327] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c00a391c>] (warn_slowpath_common+0x80/0x90)
3820<4>[ 2.166388] c0 [<c00a389c>] (warn_slowpath_common+0x0/0x90) from [<c00a39d0>] (warn_slowpath_null+0x24/0x2c)
3821<4>[ 2.166440] c0 r9:00000000 r8:c0d52b94 r7:e90d3a00 r6:c0844b24 r5:c0844340
3822<4>[ 2.166490] c0 r4:e90d3e14
3823<4>[ 2.166519] c0 [<c00a39ac>] (warn_slowpath_null+0x0/0x2c) from [<c035fddc>] (get_task_io_context+0xf8/0x104)
3824<4>[ 2.166582] c0 [<c035fce4>] (get_task_io_context+0x0/0x104) from [<c05e1380>] (mmc_request+0x40/0xf0)
3825<4>[ 2.166648] c0 [<c05e1340>] (mmc_request+0x0/0xf0) from [<c0359fc4>] (__blk_run_queue+0x60/0x7c)
3826<4>[ 2.166694] c0 r6:c1f90c00 r5:e93aab48 r4:e93ab000 r3:c05e1340
3827<4>[ 2.166751] c0 [<c0359f64>] (__blk_run_queue+0x0/0x7c) from [<c0372cb4>] (cfq_kick_queue+0x34/0x48)
3828<4>[ 2.166800] c0 r4:e93ab000 r3:c0359f64
3829<4>[ 2.166840] c0 [<c0372c80>] (cfq_kick_queue+0x0/0x48) from [<c00bf808>] (process_one_work+0x150/0x478)
3830<4>[ 2.166895] c0 r5:e90d21c0 r4:e93aab48
3831<4>[ 2.166931] c0 [<c00bf6b8>] (process_one_work+0x0/0x478) from [<c00bff28>] (worker_thread+0x178/0x410)
3832<4>[ 2.166988] c0 [<c00bfdb0>] (worker_thread+0x0/0x410) from [<c00c4b34>] (kthread+0xcc/0xd0)
3833<4>[ 2.167041] c0 [<c00c4a68>] (kthread+0x0/0xd0) from [<c00a841c>] (do_exit+0x0/0x984)
3834<4>[ 2.167082] c0 r8:00000000 r7:00000013 r6:c00a841c r5:c00c4a68 r4:e9031e7c
3835<4>[ 2.167137] c0 ---[ end trace d382f095d464feae ]---
3836<6>[ 2.170690] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
3837<6>[ 2.210514] c0 2. irda_fw_update: chip : 0202, bin : 0200, need update!
3838<3>[ 2.210808] c0 irda_wake_en: irda_wake_en : 0
3839<6>[ 2.212857] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
3840<6>[ 2.350511] c0 irda_fw_update: boot mode, FW download start! ret=01fe
3841<6>[ 5.500519] c0 1. irda_fw_update: boot down complete
3842<3>[ 5.530517] c0 irda_wake_en: irda_wake_en : 1
3843<6>[ 5.600560] c0 7. irda_fw_update: user mode : Upgrade FW_version : 0200
3844<3>[ 5.600599] c0 irda_wake_en: irda_wake_en : 0
3845<6>[ 5.711026] c0 usbcore: registered new interface driver snd-usb-audio
3846<6>[ 5.712721] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
3847<6>[ 5.712866] c0 audss_init: RCLK SRC[busclk]
3848<6>[ 5.712978] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
3849<6>[ 5.713672] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
3850<6>[ 5.713717] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
3851<7>[ 5.713755] c0 i2s_txctrl: Turn Off - spr is no active
3852<6>[ 5.713800] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
3853<6>[ 5.713840] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
3854<6>[ 5.761114] c0 wm8994-codec wm8994-codec: write 60 = 100
3855<4>[ 5.761330] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
3856<4>[ 5.761373] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
3857<6>[ 5.761878] c0 wm8994-codec wm8994-codec: write 15 = 40
3858<6>[ 5.762090] c0 wm8994-codec wm8994-codec: write 102 = 3
3859<6>[ 5.762303] c0 wm8994-codec wm8994-codec: write 56 = c07
3860<6>[ 5.762515] c0 wm8994-codec wm8994-codec: write 5d = 7e
3861<6>[ 5.762728] c0 wm8994-codec wm8994-codec: write 5e = 0
3862<6>[ 5.762938] c0 wm8994-codec wm8994-codec: write 102 = 0
3863<6>[ 5.763151] c0 wm8994-codec wm8994-codec: write 38 = 30
3864<6>[ 5.763364] c0 wm8994-codec wm8994-codec: write 402 = 1c0
3865<6>[ 5.763577] c0 wm8994-codec wm8994-codec: write 403 = 1c0
3866<6>[ 5.763789] c0 wm8994-codec wm8994-codec: write 406 = 1c0
3867<6>[ 5.764005] c0 wm8994-codec wm8994-codec: write 407 = 1c0
3868<6>[ 5.764218] c0 wm8994-codec wm8994-codec: write 502 = 1c0
3869<6>[ 5.764431] c0 wm8994-codec wm8994-codec: write 503 = 1c0
3870<6>[ 5.764644] c0 wm8994-codec wm8994-codec: write 400 = 1c0
3871<6>[ 5.764857] c0 wm8994-codec wm8994-codec: write 401 = 1c0
3872<6>[ 5.765071] c0 wm8994-codec wm8994-codec: write 404 = 1c0
3873<6>[ 5.765286] c0 wm8994-codec wm8994-codec: write 405 = 1c0
3874<6>[ 5.765498] c0 wm8994-codec wm8994-codec: write 500 = 1c0
3875<6>[ 5.765711] c0 wm8994-codec wm8994-codec: write 501 = 1c0
3876<6>[ 5.765923] c0 wm8994-codec wm8994-codec: write 610 = 3c0
3877<6>[ 5.766136] c0 wm8994-codec wm8994-codec: write 611 = 3c0
3878<6>[ 5.766352] c0 wm8994-codec wm8994-codec: write 612 = 3c0
3879<6>[ 5.766566] c0 wm8994-codec wm8994-codec: write 613 = 3c0
3880<6>[ 5.766779] c0 wm8994-codec wm8994-codec: write 421 = 210
3881<6>[ 5.766992] c0 wm8994-codec wm8994-codec: write 423 = 210
3882<6>[ 5.767203] c0 wm8994-codec wm8994-codec: write 521 = 210
3883<6>[ 5.767420] c0 wm8994-codec wm8994-codec: write 34 = 10
3884<6>[ 5.767637] c0 wm8994-codec wm8994-codec: write 35 = 10
3885<6>[ 5.767849] c0 wm8994-codec wm8994-codec: write 38 = b0
3886<6>[ 5.768062] c0 wm8994-codec wm8994-codec: write 37 = 80
3887<6>[ 5.768287] c0 wm8994-codec wm8994-codec: write 440 = 9b
3888<6>[ 5.768500] c0 wm8994-codec wm8994-codec: write 441 = 844
3889<6>[ 5.768713] c0 wm8994-codec wm8994-codec: write 442 = e8
3890<6>[ 5.768931] c0 wm8994-codec wm8994-codec: write 443 = 210
3891<6>[ 5.769145] c0 wm8994-codec wm8994-codec: write 440 = 98
3892<6>[ 5.769358] c0 wm8994-codec wm8994-codec: write 450 = 9b
3893<6>[ 5.769570] c0 wm8994-codec wm8994-codec: write 451 = 844
3894<6>[ 5.769783] c0 wm8994-codec wm8994-codec: write 452 = e8
3895<6>[ 5.769997] c0 wm8994-codec wm8994-codec: write 453 = 210
3896<6>[ 5.770235] c0 wm8994-codec wm8994-codec: write 450 = 98
3897<6>[ 5.770449] c0 wm8994-codec wm8994-codec: write 540 = 9b
3898<6>[ 5.770662] c0 wm8994-codec wm8994-codec: write 541 = 844
3899<6>[ 5.770875] c0 wm8994-codec wm8994-codec: write 542 = e8
3900<6>[ 5.771089] c0 wm8994-codec wm8994-codec: write 543 = 210
3901<6>[ 5.771303] c0 wm8994-codec wm8994-codec: write 540 = 98
3902<6>[ 5.771560] c0 wm8994-codec wm8994-codec: write 3d = 2f
3903<6>[ 5.771775] c0 wm8994-codec wm8994-codec: write 3e = 27
3904<6>[ 5.771988] c0 wm8994-codec wm8994-codec: write 18 = 18b
3905<6>[ 5.772200] c0 wm8994-codec wm8994-codec: write 1a = 18b
3906<6>[ 5.772414] c0 wm8994-codec wm8994-codec: write 19 = 18b
3907<6>[ 5.772625] c0 wm8994-codec wm8994-codec: write 1b = 18b
3908<6>[ 5.772839] c0 wm8994-codec wm8994-codec: write 26 = 179
3909<6>[ 5.773049] c0 wm8994-codec wm8994-codec: write 27 = 179
3910<6>[ 5.773261] c0 wm8994-codec wm8994-codec: write 1c = 1ed
3911<6>[ 5.773473] c0 wm8994-codec wm8994-codec: write 1d = 1ed
3912<6>[ 5.773688] c0 wm8994-codec wm8994-codec: write 20 = 1f9
3913<6>[ 5.773900] c0 wm8994-codec wm8994-codec: write 21 = 1f9
3914<6>[ 5.776244] c0 Sound: enabled mclk
3915<7>[ 5.776273] c0 pmu_debug: 0x00000900
3916<6>[ 5.781302] c0 Sound: state: 1, use_cnt: 1
3917<6>[ 5.781611] c0 wm8994-codec wm8994-codec: write 200 = 8
3918<6>[ 5.781834] c0 wm8994-codec wm8994-codec: write d0 = 1400
3919<6>[ 5.782051] c0 wm8994-codec wm8994-codec: write 210 = 81
3920<6>[ 5.782270] c0 wm8994-codec wm8994-codec: write 211 = 81
3921<6>[ 5.782506] c0 wm8994-codec wm8994-codec: write d0 = 0
3922<6>[ 5.786515] c0 wm8994-codec wm8994-codec: write 2 = 2000
3923<6>[ 5.786742] c0 wm8994-codec wm8994-codec: write 4 = 300
3924<6>[ 5.786962] c0 wm8994-codec wm8994-codec: write 5 = 300
3925<6>[ 5.787180] c0 wm8994-codec wm8994-codec: write 208 = a
3926<6>[ 5.787396] c0 wm8994-codec wm8994-codec: write 200 = 9
3927<6>[ 5.787706] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
3928<6>[ 5.787986] c0 wm8994-codec wm8994-codec: write 702 = 8101
3929<6>[ 5.788432] c0 wm8994-codec wm8994-codec: write 703 = 8101
3930<6>[ 5.788873] c0 wm8994-codec wm8994-codec: write 704 = 8101
3931<6>[ 5.790316] c0 asoc: wm8994-aif2 <-> midas.cp mapping ok
3932<6>[ 5.791544] c0 asoc: wm8994-aif3 <-> midas.bt mapping ok
3933<6>[ 5.791640] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
3934<6>[ 5.791684] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
3935<7>[ 5.791728] c0 i2s_txctrl: Turn Off - spr is no active
3936<6>[ 5.791782] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
3937<6>[ 5.791821] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
3938<7>[ 5.793236] c0 migrating range 6b2a0 6b2c0, retry (0)
3939<7>[ 5.819475] c0 migrating range 6b2c0 6b2e0, retry (0)
3940<6>[ 5.845610] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
3941<6>[ 5.848213] c0 Samsung SRP driver, (c)2011 Samsung Electronics
3942<6>[ 5.849412] c0 ALSA device list:
3943<6>[ 5.849440] c0 #0: Midas_WM1811
3944<6>[ 5.849607] c0 GACT probability NOT on
3945<6>[ 5.849640] c0 Mirror/redirect action on
3946<6>[ 5.849667] c0 u32 classifier
3947<6>[ 5.849687] c0 Actions configured
3948<6>[ 5.849712] c0 Netfilter messages via NETLINK v0.30.
3949<6>[ 5.849793] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
3950<6>[ 5.851135] c0 ctnetlink v0.93: registering with nfnetlink.
3951<6>[ 5.851199] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
3952<6>[ 5.851241] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
3953<6>[ 5.851763] c0 xt_time: kernel timezone is -0000
3954<6>[ 5.853753] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
3955<6>[ 5.853931] c0 arp_tables: (C) 2002 David S. Miller
3956<6>[ 5.854004] c0 TCP cubic registered
3957<6>[ 5.854031] c0 Initializing XFRM netlink socket
3958<6>[ 5.855127] c0 NET: Registered protocol family 10
3959<6>[ 5.858275] c0 Mobile IPv6
3960<6>[ 5.858325] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
3961<6>[ 5.858671] c0 IPv6 over IPv4 tunneling driver
3962<6>[ 5.864377] c0 NET: Registered protocol family 17
3963<6>[ 5.864438] c0 NET: Registered protocol family 15
3964<6>[ 5.864595] c0 Bluetooth: RFCOMM TTY layer initialized
3965<6>[ 5.864639] c0 Bluetooth: RFCOMM socket layer initialized
3966<6>[ 5.864677] c0 Bluetooth: RFCOMM ver 1.11
3967<6>[ 5.864707] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
3968<6>[ 5.864743] c0 Bluetooth: BNEP filters: protocol multicast
3969<6>[ 5.864776] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
3970<6>[ 5.865086] c0 NET: Registered protocol family 35
3971<5>[ 5.865271] c0 Registering the dns_resolver key type
3972<6>[ 5.865323] c0 EXYNOS4X12: Adaptive Support Voltage init
3973<6>[ 5.865359] c0 EXYNOS4X12(SG): ORIG : 2 MOD : 0 RESULT : 2
3974<4>[ 5.865396] c0 ABB-Control: abb_control_init
3975<4>[ 5.865598] c0 ABB-Control; int: 100100 KHz 1000 mV
3976<4>[ 5.865639] c0 ABB-Control; int: 267160 KHz 1000 mV
3977<4>[ 5.865673] c0 ABB-Control; int: 400266 KHz 1000 mV
3978<4>[ 5.865711] c0 ABB-Control; mif: 100100 KHz 1000 mV
3979<4>[ 5.865749] c0 ABB-Control; mif: 267160 KHz 1000 mV
3980<4>[ 5.865787] c0 ABB-Control; mif: 400266 KHz 1000 mV
3981<4>[ 5.865832] c0 ABB-Control; g3d: 54000 KHz 1050 mV
3982<4>[ 5.865865] c0 ABB-Control; g3d: 300000 KHz 1300 mV
3983<4>[ 5.865902] c0 ABB-Control; g3d: 533000 KHz 1300 mV
3984<4>[ 5.865940] c0 ABB-Control; g3d: 9999999 KHz 1300 mV
3985<4>[ 5.865980] c0 ABB-Control; arm: 100000 KHz 1000 mV
3986<4>[ 5.866013] c0 ABB-Control; arm: 800000 KHz 1000 mV
3987<4>[ 5.866047] c0 ABB-Control; arm: 1600000 KHz 1000 mV
3988<4>[ 5.866085] c0 ABB-Control; arm: 9999999 KHz 1000 mV
3989<6>[ 5.866128] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
3990<5>[ 5.866194] c0 Registering SWP/SWPB emulation handler
3991<5>[ 5.866231] c0 Registering SDIV/UDIV emulation handler
3992<6>[ 5.866335] c0 DVFS : VDD_ARM Voltage table set with 2 Group
3993<6>[ 5.867116] c0 DVFS : VDD_INT Voltage table set with 2 Group
3994<7>[ 5.867827] c0 mif: set_hsic_lpa_states: 300: called(s5p_usb_phy_init+0x160/0x364):
3995<6>[ 5.867879] c0 s5p-ehci s5p-ehci: usb phy usage(2)
3996<7>[ 5.867993] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1
3997<7>[ 5.868038] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
3998<7>[ 5.868079] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
3999<7>[ 5.868124] c0 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
4000<7>[ 5.868178] c0 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
4001<6>[ 5.868229] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
4002<7>[ 5.868314] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file 'devices'
4003<7>[ 5.868378] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
4004<6>[ 5.868762] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
4005<7>[ 5.868978] c0 migrating range 6b284 6b285, retry (0)
4006<7>[ 5.894683] c0 migrating range 6b285 6b286, retry (0)
4007<7>[ 5.920200] c0 migrating range 6b286 6b287, retry (0)
4008<7>[ 5.945530] c0 s5p-ehci s5p-ehci: park 0
4009<7>[ 5.945562] c0 s5p-ehci s5p-ehci: support lpm
4010<6>[ 5.945619] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
4011<7>[ 5.945663] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
4012<7>[ 5.945725] c0 s5p-ehci s5p-ehci: init command 0010005 (park)=0 ithresh=1 period=512 RUN
4013<6>[ 5.960081] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
4014<7>[ 5.960246] c0 usb usb1: default language 0x0409
4015<7>[ 5.960300] c0 usb usb1: udev 1, busnum 1, minor = 0
4016<6>[ 5.960338] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
4017<6>[ 5.960384] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
4018<6>[ 5.960428] c0 usb usb1: Product: S5P EHCI Host Controller
4019<6>[ 5.960465] c0 usb usb1: Manufacturer: Linux 3.0.101-HTML6405-N8000 ehci_hcd
4020<6>[ 5.960509] c0 usb usb1: SerialNumber: s5p-ehci
4021<7>[ 5.961087] c0 usb usb1: usb_probe_device
4022<7>[ 5.961119] c0 usb usb1: configuration #1 chosen from 1 choice
4023<7>[ 5.961182] c0 usb usb1: adding 1-0:1.0 (config #1, interface 0)
4024<7>[ 5.961421] c0 hub 1-0:1.0: usb_probe_interface
4025<7>[ 5.961452] c0 hub 1-0:1.0: usb_probe_interface - got id
4026<6>[ 5.961491] c0 hub 1-0:1.0: USB hub found
4027<6>[ 5.961532] c0 hub 1-0:1.0: 3 ports detected
4028<7>[ 5.961563] c0 hub 1-0:1.0: standalone hub
4029<7>[ 5.961591] c0 hub 1-0:1.0: individual port power switching
4030<7>[ 5.961624] c0 hub 1-0:1.0: individual port over-current protection
4031<7>[ 5.961662] c0 hub 1-0:1.0: power on to power good time: 20ms
4032<7>[ 5.961711] c0 hub 1-0:1.0: local power source is good
4033<7>[ 5.961747] c0 hub 1-0:1.0: enabling power on all ports
4034<7>[ 5.962066] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
4035<6>[ 5.962217] c0 CP not ready, Active State low
4036<6>[ 5.962623] c0 s5p-ohci s5p-ohci: usb phy usage(6)
4037<3>[ 5.962654] c0 s5p-ohci s5p-ohci: Already power on PHY
4038<7>[ 5.962687] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
4039<7>[ 5.962736] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
4040<6>[ 5.962779] c0 s5p-ohci s5p-ohci: s5p OHCI
4041<7>[ 5.962821] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '002'
4042<6>[ 5.963180] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
4043<7>[ 5.963234] c0 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e96f2508
4044<7>[ 5.963398] c0 migrating range 6b287 6b288, retry (0)
4045<7>[ 5.988943] c0 s5p-ohci s5p-ohci: created debug files
4046<6>[ 5.989001] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
4047<7>[ 5.989041] c0 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e96f2508
4048<7>[ 6.042079] c0 s5p-ohci s5p-ohci: OHCI controller state
4049<7>[ 6.042116] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
4050<7>[ 6.042157] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
4051<7>[ 6.042198] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
4052<7>[ 6.042237] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
4053<7>[ 6.042273] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
4054<7>[ 6.042315] c0 s5p-ohci s5p-ohci: hcca frame #0003
4055<7>[ 6.042349] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
4056<7>[ 6.042390] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
4057<7>[ 6.042429] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
4058<7>[ 6.042469] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
4059<7>[ 6.042511] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
4060<7>[ 6.042551] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
4061<7>[ 6.042631] c0 usb usb2: default language 0x0409
4062<7>[ 6.042680] c0 usb usb2: udev 1, busnum 2, minor = 128
4063<6>[ 6.042713] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
4064<6>[ 6.042757] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
4065<6>[ 6.042800] c0 usb usb2: Product: s5p OHCI
4066<6>[ 6.042826] c0 usb usb2: Manufacturer: Linux 3.0.101-HTML6405-N8000 ohci_hcd
4067<6>[ 6.042864] c0 usb usb2: SerialNumber: s5p-ohci
4068<7>[ 6.043427] c0 usb usb2: usb_probe_device
4069<7>[ 6.043459] c0 usb usb2: configuration #1 chosen from 1 choice
4070<7>[ 6.043516] c0 usb usb2: adding 2-0:1.0 (config #1, interface 0)
4071<7>[ 6.043779] c0 hub 2-0:1.0: usb_probe_interface
4072<7>[ 6.043810] c0 hub 2-0:1.0: usb_probe_interface - got id
4073<6>[ 6.043845] c0 hub 2-0:1.0: USB hub found
4074<6>[ 6.043882] c0 hub 2-0:1.0: 3 ports detected
4075<7>[ 6.043910] c0 hub 2-0:1.0: standalone hub
4076<7>[ 6.043936] c0 hub 2-0:1.0: no power switching (usb 1.0)
4077<7>[ 6.043968] c0 hub 2-0:1.0: global over-current protection
4078<7>[ 6.044000] c0 hub 2-0:1.0: power on to power good time: 4ms
4079<7>[ 6.044047] c0 hub 2-0:1.0: local power source is good
4080<7>[ 6.044078] c0 hub 2-0:1.0: no over-current condition exists
4081<7>[ 6.044112] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub
4082<7>[ 6.044430] c0 ../../../../../../kernel/samsung/html6405/drivers/usb/core/inode.c: creating file '001'
4083<6>[ 6.044689] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 10, 2nd_throttle = 16
4084<6>[ 6.044736] c0 s5p_tmu_probe: cpufreq_level[15], busfreq_value[133133]
4085<6>[ 6.044773] c0 @@@ get_refresh_interval = 0x2e
4086<6>[ 6.044801] c0 @@@ get_refresh_interval = 0x5d
4087<6>[ 6.044837] c0 ** temperature set value **
4088<6>[ 6.044858] c0 1st throttling stop_temp = 78, start_temp = 80
4089<6>[ 6.044890] c0 2nd throttling stop_temp = 87, start_tmep = 103
4090<6>[ 6.044921] c0 tripping temp = 110, s/w emergency temp = 120
4091<6>[ 6.044954] c0 mem throttling stop_temp = 80, start_temp = 85
4092<6>[ 6.044991] c0 tc_voltage stop_temp = 13, start_temp = 10
4093<4>[ 6.046177] c0 temperature code is in inaccurate -->check if vdd_18_ts is on
4094<4>[ 6.046213] c0 or surrounding temp is low.
4095<6>[ 6.046239] c0 current temp is -28 celsius degree.
4096<6>[ 6.046265] c0 so, set to 0 celsius degree!
4097<6>[ 6.046297] c0 TMU: lock is ok!
4098<6>[ 6.046494] c0 mif: init_modem, system_rev = 6
4099<6>[ 6.046548] c0 mif: umts_modem_cfg_gpio done
4100<6>[ 6.046581] c0 mif: modem_link_pm_config_gpio done
4101<3>[ 6.046883] c0 mif: modem_probe: modem_if
4102<6>[ 6.047750] c0 wake enabled for irq 366
4103<6>[ 6.047839] c0 wake enabled for irq 367
4104<6>[ 6.047865] c0 mif: create_modemctl_device: xmm6262 is created!!!
4105<6>[ 6.048420] c0 wake enabled for irq 361
4106<6>[ 6.048753] c0 usbcore: registered new interface driver cdc_modem
4107<6>[ 6.048803] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe9146400)
4108<6>[ 6.048843] c0 mif: hsic_create_link_device: usb : create_link_device DONE
4109<3>[ 6.048882] c0 mif: modem_probe: link created: usb
4110<6>[ 6.049386] c0 mif: create_io_device: Bood device = umts_boot0
4111<7>[ 6.060124] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
4112<6>[ 6.060522] c0 mif: modem_probe: Complete!!!
4113<3>[ 6.063231] c0 [E-PEN] wacom_i2c_init: Sleep type-PEN_LDO_EN pin
4114<7>[ 6.140094] c2 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
4115<6>[ 6.382032] c0 [E-PEN] wacom_i2c_query: 0th ret of wacom query=9
4116<5>[ 6.382068] c0 [E-PEN] x_max=0x556A
4117<5>[ 6.382091] c0 [E-PEN] y_max=0x35A2
4118<5>[ 6.382113] c0 [E-PEN] pressure_max=0x3FF
4119<5>[ 6.382139] c0 [E-PEN] fw_version=0x22F (d7:0x2,d8:0x2F)
4120<5>[ 6.382173] c0 [E-PEN] F, 55, 88, 35, C0, 3, FF, 2, 2F
4121<7>[ 6.591503] c0 [E-PEN] received checksum 1f, f1, 76, 81, 71
4122<7>[ 6.711397] c0 [E-PEN] epen_connection : Pass 0
4123<6>[ 6.711995] c0 input: sec_e-pen as /devices/platform/s3c2440-i2c.6/i2c-6/6-0056/input/input6
4124<6>[ 6.712283] c0 wake enabled for irq 365
4125<5>[ 6.713061] c0 [E-PEN] wacom fw ver : 0x22f, new fw ver : 0x22f
4126<6>[ 6.713190] c0 s5p_gpioint_set_type irq:394 is at GPC1(2)
4127<6>[ 6.713399] c0 s5p_gpioint_set_type irq:392 is at GPC1(0)
4128<7>[ 6.713469] c2 [E-PEN] pdct 1(0)
4129<6>[ 6.740418] c0 max77686_rtc_read_time: 112/0/1 14:3:17(0)
4130<6>[ 6.740480] c0 max77686-rtc max77686-rtc: setting system clock to 2012-01-01 14:03:17 UTC (1325426597)
4131<7>[ 6.740647] c0 ctrl->mem.size = 0xc00000
4132<7>[ 6.740672] c0 ctrl->mem.base = 0x69b00000
4133<6>[ 6.741217] c0 FIMC0 registered successfully
4134<7>[ 6.741386] c0 ctrl->mem.size = 0x1810000
4135<7>[ 6.741414] c0 ctrl->mem.base = 0x65c00000
4136<6>[ 6.741774] c0 FIMC1 registered successfully
4137<7>[ 6.741921] c0 ctrl->mem.size = 0x0
4138<7>[ 6.741946] c0 ctrl->mem.base = 0x0
4139<6>[ 6.742304] c0 FIMC2 registered successfully
4140<7>[ 6.742459] c0 ctrl->mem.size = 0x0
4141<7>[ 6.742482] c0 ctrl->mem.base = 0xffffffea
4142<6>[ 6.742822] c0 FIMC3 registered successfully
4143<6>[ 6.743137] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
4144<7>[ 6.760052] c2 [E-PEN] pen_insert_work : 1
4145<6>[ 6.762918] c0 sec_bat_probe : SEC Battery Driver Loading
4146<6>[ 6.762979] c0 Registered interrupt support for gpio group 23.
4147<6>[ 6.763014] c0 BAT : Battery GPIO initialized.
4148<6>[ 6.763218] c0 level = 100
4149<6>[ 6.763417] c0 level = 100
4150<7>[ 6.810044] c2 [E-PEN] wacom_i2c_pendct_work , 1
4151<7>[ 7.040052] c0 s5p-ohci s5p-ohci: auto-stop root hub
4152<6>[ 7.040098] c1 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
4153<6>[ 7.040308] c1 exynos4_handler_tmu_state: inform to init state to platform.
4154<6>[ 7.070049] c0 usb_switch_set_path: 0 current_path before changing
4155<6>[ 7.070099] c0 usb_apply_path: current gpio before changing : sel0:1 sel1:1 sel_cp:0
4156<6>[ 7.070154] c0 usb_apply_path: target path 10000000
4157<6>[ 7.070193] c0 usb_apply_path: 10000000 safeout2 no change
4158<6>[ 7.072243] c0 usb_switch_clr_path: 10000000 current_path before changing
4159<6>[ 7.072296] c0 usb_apply_path: current gpio before changing : sel0:1 sel1:0 sel_cp:0
4160<6>[ 7.072351] c0 usb_apply_path: target path 0
4161<6>[ 7.072385] c0 usb_apply_path: 0 safeout2 off
4162<6>[ 7.072418] c0 pmic_safeout2: onoff:0 No change in safeout2
4163<6>[ 7.072458] c0 usb_apply_path: send "usb_sel" sysfs_notify
4164<6>[ 7.072506] c0 sec_get_dedicted_charger_type : result(1), avg_vol(0)
4165<6>[ 7.072557] c0 sec_charger_cb:cable_type=1,tsp(1),usb(1),attached(1),usblpm(0)
4166<6>[ 7.072617] c0 set_usb_connection_state: set True
4167<6>[ 7.072653] c0 set_usb_connection_state: send "usb_state" sysfs_notify
4168<7>[ 7.072705] c0 usb: s3c_vbus_enable, not ready u_e: 0, is_active: 1
4169<6>[ 7.072747] c0 sec_charger_cb
4170<6>[ 7.072771] c0 sec_get_cable_status: current_status : 1
4171<6>[ 7.072809] c0 Charger Status : USB
4172<6>[ 7.072837] c0 sec_cable_check_status: Returning to Normal discharge path.
4173<6>[ 7.072892] c0 smb347_set_charging_state : enable(1), charging_mode(1)
4174<6>[ 7.072936] c0 smb347_charger_init
4175<6>[ 7.072962] c0 smb347_disable_charging
4176<6>[ 7.126912] c0 smb347_set_charging_state : LOW(USB5) charging enable
4177<6>[ 7.126958] c0 smb347_enable_charging
4178<6>[ 7.127225] c0 smb347_test_read
4179<6>[ 7.127565] c0 smb347 addr : 0x00 data : 0xdd
4180<6>[ 7.127911] c0 smb347 addr : 0x01 data : 0x66
4181<6>[ 7.128257] c0 smb347 addr : 0x02 data : 0xa7
4182<6>[ 7.128603] c0 smb347 addr : 0x03 data : 0x63
4183<6>[ 7.128948] c0 smb347 addr : 0x04 data : 0x80
4184<6>[ 7.129294] c0 smb347 addr : 0x05 data : 0x1a
4185<6>[ 7.129639] c0 smb347 addr : 0x06 data : 0x00
4186<6>[ 7.129984] c0 smb347 addr : 0x07 data : 0xbf
4187<6>[ 7.130350] c0 smb347 addr : 0x08 data : 0x08
4188<6>[ 7.130698] c0 smb347 addr : 0x09 data : 0x0d
4189<6>[ 7.131043] c0 smb347 addr : 0x0a data : 0x3f
4190<6>[ 7.131388] c0 smb347 addr : 0x0b data : 0x01
4191<6>[ 7.131733] c0 smb347 addr : 0x0c data : 0x00
4192<6>[ 7.132078] c0 smb347 addr : 0x0d data : 0x00
4193<6>[ 7.132423] c0 smb347 addr : 0x0e data : 0x0d
4194<6>[ 7.132768] c0 smb347 addr : 0x30 data : 0x82
4195<6>[ 7.133113] c0 smb347 addr : 0x31 data : 0x02
4196<6>[ 7.133458] c0 smb347 addr : 0x32 data : 0x0d
4197<6>[ 7.133803] c0 smb347 addr : 0x33 data : 0x0d
4198<6>[ 7.134148] c0 smb347 addr : 0x34 data : 0x27
4199<6>[ 7.134492] c0 smb347 addr : 0x35 data : 0x00
4200<6>[ 7.134837] c0 smb347 addr : 0x36 data : 0x00
4201<6>[ 7.135181] c0 smb347 addr : 0x37 data : 0x00
4202<6>[ 7.135527] c0 smb347 addr : 0x38 data : 0x40
4203<6>[ 7.135871] c0 smb347 addr : 0x39 data : 0x10
4204<6>[ 7.136216] c0 smb347 addr : 0x3a data : 0x01
4205<6>[ 7.136560] c0 smb347 addr : 0x3b data : 0x23
4206<6>[ 7.136905] c0 smb347 addr : 0x3c data : 0x1e
4207<6>[ 7.137250] c0 smb347 addr : 0x3d data : 0x03
4208<6>[ 7.137595] c0 smb347 addr : 0x3e data : 0x00
4209<6>[ 7.137939] c0 smb347 addr : 0x3f data : 0xc6
4210<6>[ 7.138287] c0 cable USB
4211<6>[ 7.139104] c0 fg_read_temp: temper(26776, 0x1ac7)
4212<6>[ 7.140123] c2 s5p_gpioint_set_type irq:419 is at GPM0(3)
4213<6>[ 7.140302] c0 fg_read_soc: soc(9), psoc(932), vfsoc(6)
4214<6>[ 7.140469] c2 wake enabled for irq 364
4215<6>[ 7.141135] c2 fg_read_vcell: vcell(3675, 0xb7c4)
4216<6>[ 7.142728] c2 fg_read_current: curr(-42), avg_curr(-85mA)
4217<6>[ 7.144722] c0 fg_check_vf_fullcap_range: prevVFFCap(0x4976), newVFFcap(0x4976)
4218<6>[ 7.144783] c0 fg_check_vf_fullcap_range: keep VFFCap: newVFFcap(0x4976)
4219<6>[ 7.146704] c2 avg_v(3671), fullcap(7064), remcap(659), mixcap(662), avcap(657)
4220<6>[ 7.147103] c0 fg_read_soc: soc(9), psoc(932), vfsoc(6)
4221<6>[ 7.147525] c0 fg_read_vcell: vcell(3675, 0xb7c4)
4222<6>[ 7.148319] c0 fg_read_current: curr(-42), avg_curr(-85mA)
4223<6>[ 7.150279] c0 avg_v(3671), fullcap(7064), remcap(659), mixcap(662), avcap(657)
4224<6>[ 7.170048] c2 [MAX17042] 1/1/2012 14:03,
4225<6>[ 7.176141] c2 0000h,ff00h,7f80h,ff01h,0000h,0527h,0953h,4ae7h,
4226<6>[ 7.176181] c2 1ac7h,b7c4h,feefh,fddfh,000ah,0701h,0950h,052dh,
4227<6>[ 7.180062] c0 [MAX17042] 1/1/2012 14:03,
4228<6>[ 7.186158] c0 0000h,ff00h,7f80h,ff01h,0000h,0527h,0953h,4ae7h,
4229<6>[ 7.186197] c0 1ac7h,b7c4h,feefh,fddfh,000ah,0701h,0950h,052dh,
4230<6>[ 7.206106] c2 3730h,134dh,7d5ah,0000h,0318h,0148h,1ac2h,00a9h,
4231<6>[ 7.206145] c2 4996h,b78fh,2114h,c87bh,2ed6h,2214h,0600h,0523h,
4232<6>[ 7.216118] c0 3730h,134dh,7d5ah,0000h,0318h,0148h,1ac2h,00a9h,
4233<6>[ 7.216157] c0 4996h,b78fh,2114h,c87bh,2ed6h,2214h,0600h,0523h,
4234<6>[ 7.236107] c2 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7deeh,
4235<6>[ 7.236149] c2 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
4236<6>[ 7.246117] c0 4d78h,0092h,fc6fh,4976h,1400h,2305h,1ab3h,7deeh,
4237<6>[ 7.246156] c0 0076h,87a4h,506bh,0010h,e3e1h,290eh,377eh,0000h,
4238<6>[ 7.266121] c2 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
4239<6>[ 7.266160] c2 0076h,1a1ch,007dh,0502h,1680h,5608h,6641h,e000h,
4240<6>[ 7.276110] c0 5e0dh,7997h,0800h,0000h,0502h,49d0h,0100h,05e0h,
4241<6>[ 7.276149] c0 0076h,1a1ch,007dh,0502h,1680h,5608h,6642h,e000h,
4242<6>[ 7.276209] c0 Atmel MXT1664S 3-004a: charging mode
4243<6>[ 7.296101] c2 d800h,4830h,f723h,3a00h,b77bh,12eah,337eh,ffa9h,
4244<6>[ 7.296140] c2 0787h,ab07h,050dh,7a00h,054dh,0521h,6d68h,5b56h,
4245<6>[ 7.306129] c0 d800h,4830h,f723h,3a00h,b77bh,12eah,337eh,ffa9h,
4246<6>[ 7.306169] c0 0787h,ab07h,050dh,7a00h,054dh,0521h,6d68h,5b56h,
4247<6>[ 7.326101] c2 0c47h,0a2bh,0001h,167dh,0003h,0002h,0763h,ffffh,
4248<6>[ 7.326140] c2 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
4249<6>[ 7.336129] c0 0c47h,0a2bh,0001h,167dh,0003h,0002h,0763h,ffffh,
4250<6>[ 7.336170] c0 4c40h,0010h,4c70h,0000h,4000h,0000h,b8e0h,1520h,
4251<6>[ 7.356115] c2 0000h,0000h,0000h,0000h,0000h,0000h,0701h,005ah,
4252<6>[ 7.356153] c2 3ef6h,4d04h,fdeeh,b8d8h,0070h,3910h,b7a2h,06d9h,
4253<6>[ 7.366123] c0 0000h,0000h,0000h,0000h,0000h,0000h,0701h,ff11h,
4254<6>[ 7.366162] c0 3ef6h,4d04h,fdeeh,b8d8h,0070h,3910h,b7a2h,06d9h,
4255<6>[ 7.380066] c2
4256<6>[ 7.390056] c0
4257<6>[ 7.391153] c0 smb347_get_charging_state : 0x3dh(0x05)
4258<6>[ 7.391200] c0 BAT : soc(9), vcell(3675mV), curr(-42mA), avg curr(-85mA), temp(26.7), chg(1)
4259<6>[ 7.391258] c0 , full(0), rechg(0), lowbat(0), cable(1)
4260<6>[ 7.391346] c0 level = 9
4261<6>[ 7.444422] c2 wake enabled for irq 371
4262<6>[ 7.444457] c2 lpm_mode_check : charging_mode_booting(0)
4263<6>[ 7.446965] c2 [ ACCESSORY (acc_con_init,876) ]
4264<6>[ 7.447072] c2 [ ACCESSORY (acc_con_probe,658) ]
4265<4>[ 7.447704] c2 dhd_module_init in
4266<4>[ 7.447738] c2 found wifi platform device bcmdhd_wlan
4267<4>[ 7.447867] c2 Power-up adapter 'DHD generic adapter'
4268<4>[ 7.448067] c2 wifi_platform_set_power = 1
4269<4>[ 7.448105] c2 ------------------------------------------------------------------------------------------------
4270<4>[ 7.448176] c2 brcm_wlan_power Enter: power on
4271<6>[ 7.448211] c2 111brcm_wlan_power Enter: power on
4272<4>[ 7.448246] c2 gpio_table = [2]
4273<7>[ 7.448378] c2 WLAN: GPIO_WLAN_EN = 1
4274<4>[ 7.650041] c2 wifi_platform_bus_enumerate device present 1
4275<4>[ 7.650083] c2 gpio_table = [6]
4276<6>[ 7.650219] c2 mmc2: card inserted.
4277<6>[ 7.890374] c0 mmc2: cmd 52 command timeout error
4278<6>[ 7.890756] c0 mmc2: cmd 52 command timeout error
4279<6>[ 7.892840] c0 mmc2: cmd 8 command timeout error
4280<4>[ 7.908310] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
4281<4>[ 7.910923] c0 mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
4282<4>[ 7.913853] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
4283<4>[ 7.920628] c0 mmc2: queuing unknown CIS tuple 0x80 (19 bytes)
4284<6>[ 7.988451] c0 mmc2: new high speed SDIO card at address 0001
4285<4>[ 8.007361] c0 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
4286<4>[ 8.007616] c0 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
4287<4>[ 8.007686] c0 bus num (host idx)=2, slot num (rca)=1
4288<4>[ 8.007757] c0 found adapter info 'DHD generic adapter'
4289<4>[ 8.007955] c0 alloc static buf at e9280000!
4290<4>[ 8.020287] c0 F1 signature OK, socitype:0x1 chip:0x4334 rev:0x3 pkg:0x0
4291<4>[ 8.022418] c0 DHD: dongle ram size is set to 524288(orig 524288) at 0x0
4292<4>[ 8.024566] c0 wifi_platform_prealloc: failed to alloc static mem section 7
4293<4>[ 8.026589] c0 wl_create_event_handler(): thread:wl_event_handler:531 started
4294<6>[ 8.026675] c3 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe9704608
4295<4>[ 8.037263] c0 p2p0: P2P Interface Registered
4296<4>[ 8.037549] c0 dhd_attach(): thread:dhd_watchdog_thread:537 started
4297<4>[ 8.037849] c0 dhd_attach(): thread:dhd_dpc:538 started
4298<4>[ 8.037951] c0 dhd_deferred_work_init: work queue initialized
4299<4>[ 8.038521] c0 Dongle Host Driver, version 1.141.44.4 (r)
4300<4>[ 8.038582] c0 Compiled in drivers/net/wireless/bcmdhd on Nov 5 2019 at 18:40:48
4301<6>[ 8.040146] c2 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
4302<6>[ 8.040665] c2 normal: free cpufreq_limit & interrupt enable.
4303<4>[ 8.049153] c0 Register interface [wlan0] MAC: 00:96:d7
4304<4>[ 8.049213] c0
4305<4>[ 8.049259] c0 dhd_prot_ioctl : bus is down. we have nothing to do
4306<4>[ 8.049339] c0 dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
4307<4>[ 8.049706] c0 wifi_platform_set_power = 0
4308<4>[ 8.049764] c0 ------------------------------------------------------------------------------------------------
4309<4>[ 8.049884] c0 brcm_wlan_power Enter: power off
4310<6>[ 8.049945] c0 111brcm_wlan_power Enter: power off
4311<4>[ 8.050008] c0 gpio_table = [2]
4312<7>[ 8.050186] c0 WLAN: GPIO_WLAN_EN = 0
4313<7>[ 8.060139] c2 hub 1-0:1.0: hub_suspend
4314<7>[ 8.060235] c2 usb usb1: bus auto-suspend
4315<7>[ 8.060298] c2 s5p-ehci s5p-ehci: suspend root hub
4316<7>[ 8.140134] c2 hub 2-0:1.0: hub_suspend
4317<7>[ 8.140214] c2 usb usb2: bus auto-suspend
4318<7>[ 8.140277] c2 s5p-ohci s5p-ohci: suspend root hub
4319<4>[ 8.161464] c0 Warning: unable to open an initial console.
4320<6>[ 8.161667] c0 Freeing init memory: 296K
4321<0>[ 8.163999] c1 Kernel panic - not syncing: Attempted to kill init!
4322<4>[ 8.164082] c1 Backtrace:
4323<4>[ 8.164189] c1 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
4324<4>[ 8.164294] c1 r7:e901a000 r6:c03882c0 r5:c08387ac r4:c0d2f0c0
4325<4>[ 8.164421] c1 [<c0838064>] (dump_stack+0x0/0x24) from [<c0838658>] (panic+0xb8/0x20c)
4326<4>[ 8.164554] c1 [<c08385a0>] (panic+0x0/0x20c) from [<c00a8da0>] (complete_and_exit+0x0/0x2c)
4327<4>[ 8.164653] c1 r3:c08385a0 r2:e902bdc8 r1:00000000 r0:c09f8d94
4328<4>[ 8.164755] c1 r7:e901a000
4329<4>[ 8.164828] c1 [<c00a841c>] (do_exit+0x0/0x984) from [<c00a8e2c>] (do_group_exit+0x48/0xe4)
4330<4>[ 8.164926] c1 r7:e902a000
4331<4>[ 8.164998] c1 [<c00a8de4>] (do_group_exit+0x0/0xe4) from [<c00b6b54>] (get_signal_to_deliver+0x34c/0x5fc)
4332<4>[ 8.165108] c1 r7:e902a000 r6:00106001 r5:e902bee8 r4:e902a000
4333<4>[ 8.165231] c1 [<c00b6808>] (get_signal_to_deliver+0x0/0x5fc) from [<c005c32c>] (do_signal+0x78/0x5b4)
4334<4>[ 8.165358] c1 [<c005c2b4>] (do_signal+0x0/0x5b4) from [<c005cbfc>] (do_notify_resume+0x68/0x74)
4335<4>[ 8.165480] c1 [<c005cb94>] (do_notify_resume+0x0/0x74) from [<c0058e98>] (work_pending+0x24/0x28)
4336<4>[ 8.165586] c1 r4:0000040f r3:00000000
4337<2>[ 8.165768] c2 CPU2: stopping
4338<4>[ 8.165816] c2 Backtrace:
4339<4>[ 8.165902] c2 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
4340<4>[ 8.166005] c2 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000002
4341<4>[ 8.166137] c2 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
4342<4>[ 8.166251] c2 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
4343<4>[ 8.166352] c2 Exception stack(0xe903bef8 to 0xe903bf40)
4344<4>[ 8.166428] c2 bee0: 0316a8e2 4f0067a6
4345<4>[ 8.166544] c2 bf00: 03879c70 000e1e71 c0d2cbc8 c00d1268 c1f9b1c0 c08499dc e903a000 c0825d04
4346<4>[ 8.166661] c2 bf20: c00d94e0 e903bf74 29aaaa7c e903bf40 c00d1170 c006fe88 80000013 ffffffff
4347<4>[ 8.166791] c2 [<c006fe38>] (exynos4_enter_idle+0x0/0x1b0) from [<c05cb594>] (cpuidle_idle_call+0xa4/0x114)
4348<4>[ 8.166904] c2 r9:c0825d04 r8:e903a000 r7:c08499dc r6:c1f9b1c0 r5:c0d70a50
4349<4>[ 8.167018] c2 r4:c1f9b1d0
4350<4>[ 8.167085] c2 [<c05cb4f0>] (cpuidle_idle_call+0x0/0x114) from [<c0059f10>] (cpu_idle+0x118/0x14c)
4351<4>[ 8.167189] c2 r6:c0d2c3a4 r5:c00a5ec0 r4:c0c91d64 r3:c05cb4f0
4352<4>[ 8.167312] c2 [<c0059df8>] (cpu_idle+0x0/0x14c) from [<c0834688>] (secondary_start_kernel+0x1c0/0x1c8)
4353<4>[ 8.167439] c2 [<c08344c8>] (secondary_start_kernel+0x0/0x1c8) from [<40833f14>] (0x40833f14)
4354<4>[ 8.167539] c2 r6:10c0387d r5:00000015 r4:6907006a r3:c0833efc
4355<2>[ 8.167645] c3 CPU3: stopping
4356<4>[ 8.167691] c3 Backtrace:
4357<4>[ 8.167788] c3 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
4358<4>[ 8.167893] c3 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000003
4359<4>[ 8.168025] c3 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
4360<4>[ 8.168145] c3 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
4361<4>[ 8.168241] c3 Exception stack(0xe903def8 to 0xe903df40)
4362<4>[ 8.168315] c3 dee0: 63583209 4f0067a6
4363<4>[ 8.168434] c3 df00: 03879c5d 000e1e71 c0d2cbc8 c00d1268 c1fa31c0 c08499dc e903c000 c0825d04
4364<4>[ 8.168548] c3 df20: c00d94e0 e903df74 29aaaa7c e903df40 c00d1170 c006fe88 80000013 ffffffff
4365<4>[ 8.168674] c3 [<c006fe38>] (exynos4_enter_idle+0x0/0x1b0) from [<c05cb594>] (cpuidle_idle_call+0xa4/0x114)
4366<4>[ 8.168786] c3 r9:c0825d04 r8:e903c000 r7:c08499dc r6:c1fa31c0 r5:c0d70a50
4367<4>[ 8.168900] c3 r4:c1fa31d0
4368<4>[ 8.168965] c3 [<c05cb4f0>] (cpuidle_idle_call+0x0/0x114) from [<c0059f10>] (cpu_idle+0x118/0x14c)
4369<4>[ 8.169070] c3 r6:c0d2c3a4 r5:c00a5ec0 r4:c0c91d64 r3:c05cb4f0
4370<4>[ 8.169195] c3 [<c0059df8>] (cpu_idle+0x0/0x14c) from [<c0834688>] (secondary_start_kernel+0x1c0/0x1c8)
4371<4>[ 8.169320] c3 [<c08344c8>] (secondary_start_kernel+0x0/0x1c8) from [<40833f14>] (0x40833f14)
4372<4>[ 8.169423] c3 r6:10c0387d r5:00000015 r4:6907c06a r3:c0833efc
4373<2>[ 8.169530] c0 CPU0: stopping
4374<4>[ 8.169576] c0 Backtrace:
4375<4>[ 8.169671] c0 [<c005d2f0>] (dump_backtrace+0x0/0x120) from [<c0838084>] (dump_stack+0x20/0x24)
4376<4>[ 8.169774] c0 r7:00000006 r6:c0050184 r5:c0d2c540 r4:00000000
4377<4>[ 8.169906] c0 [<c0838064>] (dump_stack+0x0/0x24) from [<c005276c>] (do_IPI+0x37c/0x398)
4378<4>[ 8.170020] c0 [<c00523f0>] (do_IPI+0x0/0x398) from [<c00587c0>] (__irq_svc+0x80/0x160)
4379<4>[ 8.170118] c0 Exception stack(0xc0ad1eb8 to 0xc0ad1f00)
4380<4>[ 8.170197] c0 1ea0: 0316a8f0 4f0067a6
4381<4>[ 8.170312] c0 1ec0: 03879c80 000e1e72 c0d2cbc8 c00d1268 c1f8b1c0 c08499dc c0ad0000 c0825d04
4382<4>[ 8.170428] c0 1ee0: c00d94e0 c0ad1f34 29aaaa7c c0ad1f00 c00d1170 c006fe88 80000013 ffffffff
4383<4>[ 8.170554] c0 [<c006fe38>] (exynos4_enter_idle+0x0/0x1b0) from [<c05cb594>] (cpuidle_idle_call+0xa4/0x114)
4384<4>[ 8.170667] c0 r9:c0825d04 r8:c0ad0000 r7:c08499dc r6:c1f8b1c0 r5:c0d70a50
4385<4>[ 8.170782] c0 r4:c1f8b1d0
4386<4>[ 8.170849] c0 [<c05cb4f0>] (cpuidle_idle_call+0x0/0x114) from [<c0059f10>] (cpu_idle+0x118/0x14c)
4387<4>[ 8.170955] c0 r6:c0d2c3a4 r5:c00a5ec0 r4:c0c91d64 r3:c05cb4f0
4388<4>[ 8.171075] c0 [<c0059df8>] (cpu_idle+0x0/0x14c) from [<c0825d00>] (rest_init+0xf4/0xf8)
4389<4>[ 8.171190] c0 [<c0825c0c>] (rest_init+0x0/0xf8) from [<c0008d6c>] (start_kernel+0x5d4/0x5e0)
4390<4>[ 8.171292] c0 r4:c0c89114 r3:c0825c0c
4391<4>[ 8.171373] c0 [<c0008798>] (start_kernel+0x0/0x5e0) from [<40008044>] (0x40008044)
4392<6>[ 8.171484] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
4393<0>[ 8.171581] c1 Rebooting in 5 seconds..
4394<0>[ 10.661037] c1 sec_reboot (104, emergency)