· 6 years ago · Mar 19, 2020, 11:30 AM
1
2DDR Version V1.26
3REGFB: 0x00000031, 0x00000031
4In
5589MHz
6DDR3
7 Col=10 Bank=8 Row=15 Size=512MB
8msch:1
9Returning to boot ROM...
10INFO: Preloader serial: 0
11NOTICE: BL31: v1.3(release):3a579d3
12NOTICE: BL31: Built : 09:09:17, Jan 29 2019
13INFO: Lastlog: last=0x100000, realtime=0x102000, size=0x2000
14INFO: ARM GICv2 driver initialized
15INFO: Using opteed sec cpu_context!
16INFO: boot cpu mask: 1
17INFO: plat_rockchip_pmu_init: pd status 0xe b
18INFO: BL31: Initializing runtime services
19WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
20ERROR: Error initializing runtime service opteed_fast
21INFO: BL31: Preparing for EL3 exit to normal world
22INFO: Entry point address = 0x600000
23INFO: SPSR = 0x3c9
24
25
26U-Boot 2017.09-02378-g6de46245e6 (Mar 12 2020 - 07:47:46 +0000), Build: jenkins-linux-build-release-32
27
28Model: Radxa ROCK Pi S
29PreSerial: 0
30DRAM: 510 MiB
31Relocation Offset is: 1f92b000
32vdd_core 1044000 uV
33vdd-core init 1044000 uV
34MMC: dwmmc@ff480000: 0, dwmmc@ff490000: 1
35Using default environment
36
37In: serial@ff0c0000
38Out: serial@ff0c0000
39Err: serial@ff0c0000
40Model: Radxa ROCK Pi S
41Bootdev(atags): mmc 0
42PartType: EFI
43## Error: Can't overwrite "serial#"
44## Error inserting "serial#" variable, errno=1
45get part misc fail -1
46boot mode: None
47CLK:
48apll 816000 KHz
49dpll 1300000 KHz
50vpll0 1179647 KHz
51vpll1 903167 KHz
52aclk_bus 185714 KHz
53hclk_bus 100000 KHz
54pclk_bus 100000 KHz
55aclk_peri 185714 KHz
56hclk_peri 100000 KHz
57pclk_peri 100000 KHz
58hclk_audio 98303 KHz
59pclk_audio 98303 KHz
60Net: Net Initialization Skipped
61No ethernet found.
62Hit key to stop autoboot('CTRL+C'): 1 [08][08][08] 0
63android_bootloader_boot_flow Could not find misc partition
64ANDROID: reboot reason: "(none)"
65** Invalid Android Image header **
66android_bootloader_boot_flow boot part load fail
67Android boot failed, error -1.
68=Booting Rockchip format image=
69boot_rockchip_image kernel or boot part info error
70Card did not respond to voltage select!
71mmc_init: -95, time 9
72switch to partitions #0, OK
73mmc0 is current device
74Scanning mmc 0:1...
75Found U-Boot script /boot.scr
76reading /boot.scr
772679 bytes read in 3 ms (872.1 KiB/s)
78## Executing script at 00500000
79Boot script loaded from mmc 0
80reading /uEnv.txt
81344 bytes read in 1 ms (335.9 KiB/s)
82reading /initrd.img-4.4.143-39-rockchip-gdaf243b9655a
836606468 bytes read in 283 ms (22.3 MiB/s)
84reading /vmlinuz-4.4.143-39-rockchip-gdaf243b9655a
8510137608 bytes read in 434 ms (22.3 MiB/s)
86reading /dtbs/4.4.143-39-rockchip-gdaf243b9655a/rockchip/rk3308-rock-pi-s.dtb
8763582 bytes read in 8 ms (7.6 MiB/s)
88reading /dtbs/4.4.143-39-rockchip-gdaf243b9655a/rockchip/overlay/rk3308-console-on-uart0.dtbo
89546 bytes read in 9 ms (58.6 KiB/s)
90Applying kernel provided DT overlay rk3308-console-on-uart0.dtbo
91reading /dtbs/4.4.143-39-rockchip-gdaf243b9655a/rockchip/overlay/rockchip-fixup.scr
921814 bytes read in 10 ms (176.8 KiB/s)
93Applying kernel provided DT fixup script (rockchip-fixup.scr)
94## Executing script at 05000000
95initrdsize = 0x62c6be
96## Flattened Device Tree blob at 01f00000
97 Booting using the fdt blob at 0x1f00000
98 reserving fdt memory region: addr=1f00000 size=75000
99 Loading Ramdisk to 1eeed000, end 1f5196be ... OK
100 Loading Device Tree to 000000001ee75000, end 000000001eeecfff ... OK
101Adding bank: 0x00200000 - 0x20000000 (size: 0x1fe00000)
102
103Starting kernel ...
104
105
106[ 0.000000] Booting Linux on physical CPU 0x0
107[ 0.000000] Initializing cgroup subsys cpuset
108[ 0.000000] Initializing cgroup subsys cpu
109[ 0.000000] Initializing cgroup subsys cpuacct
110[ 0.000000] Linux version 4.4.143-39-rockchip-gdaf243b9655a (root@1349469ebb81) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) WARNING: suspend_mode_handler: Not support call: 0x4
111) #1 SMP PREEMPT Thu Mar 12 07:51:00 UTC 2020
112[ 0.000000] Boot CPU: AArch64 Processor [410fd042]
113[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
114[ 0.000000] psci: probing for conduit method from DT.
115[ 0.000000] psci: PSCIv1.0 detected in firmware.
116[ 0.000000] psci: Using standard PSCI v0.2 function IDs
117[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
118[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc01ff56000 s40344 r8192 d29288 u77824
119[ 0.000000] Detected VIPT I-cache on CPU0
120[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128520
121[ 0.000000] Kernel command line: initrd=initrd.img-4.4.143-39-rockchip-gdaf243b9655a root=UUID=37055840-4ec4-444f-979b-9e47ee4bd848 rootwait rw rootfstype=ext4 console=ttyS2,1500000n8 panic=10 consoleblank=0 loglevel=7
122[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
123[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
124[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
125[ 0.000000] software IO TLB [mem 0x19e75000-0x1de75000] (64MB) mapped at [ffffffc019e75000-ffffffc01de74fff]
126[ 0.000000] Memory: 429348K/522240K available (6654K kernel code, 492K rwdata, 2352K rodata, 384K init, 506K bss, 92892K reserved, 0K cma-reserved)
127[ 0.000000] Virtual kernel memory layout:
128[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
129[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
130[ 0.000000] .init : 0xffffff8008950000 - 0xffffff80089b0000 ( 384 KB)
131[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008700000 ( 6656 KB)
132[ 0.000000] .rodata : 0xffffff8008700000 - 0xffffff8008950000 ( 2368 KB)
133[ 0.000000] .data : 0xffffff80089b0000 - 0xffffff8008a2b008 ( 493 KB)
134[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
135[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
136[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc020000000 ( 510 MB)
137[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
138[ 0.000000] Preemptible hierarchical RCU implementation.
139[ 0.000000] [09]Build-time adjustment of leaf fanout to 64.
140[ 0.000000] NR_IRQS:64 nr_irqs:64 0
141[ 0.000000] GIC: Using split EOI/Deactivate mode
142[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
143[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
144[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
145[ 0.001038] Console: colour dummy device 80x25
146[ 0.001066] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
147[ 0.001080] pid_max: default: 32768 minimum: 301
148[ 0.001172] Security Framework initialized
149[ 0.001187] AppArmor: AppArmor disabled by boot time parameter
150[ 0.001252] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
151[ 0.001266] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
152[ 0.002008] Initializing cgroup subsys io
153[ 0.002033] Initializing cgroup subsys memory
154[ 0.002069] Initializing cgroup subsys devices
155[ 0.002086] Initializing cgroup subsys freezer
156[ 0.002101] Initializing cgroup subsys net_cls
157[ 0.002116] Initializing cgroup subsys perf_event
158[ 0.002130] Initializing cgroup subsys net_prio
159[ 0.002152] Initializing cgroup subsys hugetlb
160[ 0.002165] Initializing cgroup subsys pids
161[ 0.002510] sched-energy: CPU device node has no sched-energy-costs
162[ 0.002525] Invalid sched_group_energy for CPU0
163[ 0.002533] CPU0: update cpu_capacity 1024
164[ 0.002587] ASID allocator initialised with 65536 entries
165[ 0.035844] Detected VIPT I-cache on CPU1
166[ 0.035902] Invalid sched_group_energy for CPU1
167[ 0.035908] CPU1: update cpu_capacity 1024
168[ 0.035913] CPU1: Booted secondary processor [410fd042]
169[ 0.047868] Detected VIPT I-cache on CPU2
170[ 0.047907] Invalid sched_group_energy for CPU2
171[ 0.047912] CPU2: update cpu_capacity 1024
172[ 0.047916] CPU2: Booted secondary processor [410fd042]
173[ 0.059914] Detected VIPT I-cache on CPU3
174[ 0.059951] Invalid sched_group_energy for CPU3
175[ 0.059955] CPU3: update cpu_capacity 1024
176[ 0.059960] CPU3: Booted secondary processor [410fd042]
177[ 0.060038] Brought up 4 CPUs
178[ 0.060099] SMP: Total of 4 processors activated.
179[ 0.060113] CPU: All CPU(s) started at EL2
180[ 0.060264] Invalid sched_group_energy for CPU3
181[ 0.060277] Invalid sched_group_energy for Cluster3
182[ 0.060286] Invalid sched_group_energy for CPU2
183[ 0.060295] Invalid sched_group_energy for Cluster2
184[ 0.060302] Invalid sched_group_energy for CPU1
185[ 0.060310] Invalid sched_group_energy for Cluster1
186[ 0.060317] Invalid sched_group_energy for CPU0
187[ 0.060327] Invalid sched_group_energy for Cluster0
188[ 0.060973] devtmpfs: initialized
189[ 0.078716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
190[ 0.078753] futex hash table entries: 1024 (order: 4, 65536 bytes)
191[ 0.079228] pinctrl core: initialized pinctrl subsystem
192[ 0.080510] NET: Registered protocol family 16
193[ 0.092080] cpuidle: using governor menu
194[ 0.092117] Registered FIQ tty driver
195[ 0.092372] vdso: 2 pages (1 code @ ffffff8008706000, 1 data @ ffffff80089b4000)
196[ 0.092414] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
197[ 0.092644] DMA: preallocated 256 KiB pool for atomic allocations
198[ 0.095720] console [pstore-1] enabled
199[ 0.095731] pstore: Registered ramoops as persistent store backend
200[ 0.095744] ramoops: attached 0xf0000@0x110000, ecc: 0/0
201[ 0.113445] fiq debugger fiq mode enabled
202[ 0.114383] console [ttyFIQ0] enabled
203[ 0.114692] Registered fiq debugger ttyFIQ0
204[ 0.139784] vcc_1v8: regulator get failed, ret=-517
205[ 0.140774] vcc_1v8_codec: regulator get failed, ret=-517
206[ 0.141649] vcc_1v8: supplied by vcc_io
207[ 0.141749] vcc_1v8_codec: supplied by vcc_io
208[ 0.143976] SCSI subsystem initialized
209[ 0.144677] usbcore: registered new interface driver usbfs
210[ 0.144764] usbcore: registered new interface driver hub
211[ 0.144880] usbcore: registered new device driver usb
212[ 0.145118] pps_core: LinuxPPS API ver. 1 registered
213[ 0.145132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
214[ 0.145168] PTP clock support registered
215[ 0.146359] Advanced Linux Sound Architecture Driver Initialized.
216[ 0.147107] Bluetooth: Core ver 2.21
217[ 0.147163] NET: Registered protocol family 31
218[ 0.147176] Bluetooth: HCI device and connection manager initialized
219[ 0.147201] Bluetooth: HCI socket layer initialized
220[ 0.147217] Bluetooth: L2CAP socket layer initialized
221[ 0.147258] Bluetooth: SCO socket layer initialized
222[ 0.147837] NetLabel: Initializing
223[ 0.147854] NetLabel: domain hash size = 128
224[ 0.147864] NetLabel: protocols = UNLABELED CIPSOv4
225[ 0.147947] NetLabel: unlabeled traffic allowed by default
226[ 0.148573] rockchip-cpuinfo cpuinfo: Serial[09][09]: e250761a1286c740
227[ 0.149171] clocksource: Switched to clocksource arch_sys_counter
228[ 0.161395] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
229[ 0.161426] missing polling-delay-passive property
230[ 0.161450] failed to build thermal zone soc_thermal: -22
231[ 0.161798] NET: Registered protocol family 2
232[ 0.162560] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
233[ 0.162653] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
234[ 0.162743] TCP: Hash tables configured (established 4096 bind 4096)
235[ 0.162843] UDP hash table entries: 256 (order: 1, 8192 bytes)
236[ 0.162882] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
237[ 0.163162] NET: Registered protocol family 1
238[ 0.163791] Trying to unpack rootfs image as initramfs...
239[ 0.637857] rootfs image is not initramfs (read error); looks like an initrd
240[ 0.657720] Freeing initrd memory: 6320K
241[ 0.658320] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
242[ 0.662258] audit: initializing netlink subsys (disabled)
243[ 0.662370] audit: type=2000 audit(0.660:1): initialized
244[ 0.663182] HugeTLB registered 2 MB page size, pre-allocated 0 pages
245[ 0.672636] squashfs: version 4.0 (2009/01/31) Phillip Lougher
246[ 0.673508] fuse init (API version 7.23)
247[ 0.678536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
248[ 0.678750] io scheduler noop registered
249[ 0.678780] io scheduler deadline registered (default)
250[ 0.678978] io scheduler cfq registered
251[ 0.684464] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330
252[ 0.684523] dma-pl330 ff2c0000.dma-controller: [09]DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
253[ 0.686995] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330
254[ 0.687037] dma-pl330 ff2d0000.dma-controller: [09]DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
255[ 0.687427] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu
256[ 0.687586] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core
257[ 0.689100] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
258[ 0.691597] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 11, base_baud = 5078125) is a 16550A
259[ 0.692594] [drm] Initialized drm 1.1.0 20060810
260[ 0.695351] Unable to detect cache hierarchy for CPU 0
261[ 0.696595] brd: module loaded
262[ 0.704104] loop: module loaded
263[ 0.704586] SCSI Media Changer driver v0.25
264[ 0.707049] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (output).
265[ 0.707104] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay.
266[ 0.707123] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30
267[ 0.707139] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay.
268[ 0.707153] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10
269[ 0.707178] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no).
270[ 0.712453] rk_gmac-dwmac ff4e0000.ethernet: init for RMII
271[ 0.712608] stmmac - user ID: 0x10, Synopsys ID: 0x35
272[ 0.712626] Ring mode enabled
273[ 0.712636] DMA HW capability register supported
274[ 0.712645] Normal descriptors
275[ 0.712657] RX Checksum Offload Engine supported (type 2)
276[ 0.712665] TX Checksum insertion supported
277[ 0.712675] Wake-Up On Lan supported
278[ 0.712742] Enable RX Mitigation via HW Watchdog Timer
279[ 0.826663] brian phy in rtl8201f_probe
280[ 0.831534] brian phy in rtl8201f_probe
281[ 0.834304] libphy: stmmac: probed
282[ 0.834329] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active
283[ 0.834344] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)
284[ 0.835520] Rockchip WiFi SYS interface (V1.00) ...
285[ 0.835983] ff400000.usb supply vusb_d not found, using dummy regulator
286[ 0.836096] ff400000.usb supply vusb_a not found, using dummy regulator
287[ 0.949233] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
288[ 0.949824] dwc2 ff400000.usb: DWC OTG Controller
289[ 0.949874] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
290[ 0.949926] dwc2 ff400000.usb: irq 18, io mem 0xff400000
291[ 0.950142] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
292[ 0.950168] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
293[ 0.950184] usb usb1: Product: DWC OTG Controller
294[ 0.950203] usb usb1: Manufacturer: Linux 4.4.143-39-rockchip-gdaf243b9655a dwc2_hsotg
295[ 0.950220] usb usb1: SerialNumber: ff400000.usb
296[ 0.951041] hub 1-0:1.0: USB hub found
297[ 0.951103] hub 1-0:1.0: 1 port detected
298[ 1.589286] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_FLOATING_CHARGER
299[ 1.590137] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
300[ 1.590172] ehci-platform: EHCI generic platform driver
301[ 1.594014] ehci-platform ff440000.usb: EHCI Host Controller
302[ 1.594282] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
303[ 1.594445] ehci-platform ff440000.usb: irq 19, io mem 0xff440000
304[ 1.605229] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
305[ 1.605457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
306[ 1.605482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
307[ 1.605520] usb usb2: Product: EHCI Host Controller
308[ 1.605536] usb usb2: Manufacturer: Linux 4.4.143-39-rockchip-gdaf243b9655a ehci_hcd
309[ 1.605554] usb usb2: SerialNumber: ff440000.usb
310[ 1.606259] hub 2-0:1.0: USB hub found
311[ 1.606320] hub 2-0:1.0: 1 port detected
312[ 1.606938] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
313[ 1.606990] ohci-platform: OHCI generic platform driver
314[ 1.607393] ohci-platform ff450000.usb: Generic Platform OHCI controller
315[ 1.607673] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3
316[ 1.607822] ohci-platform ff450000.usb: irq 20, io mem 0xff450000
317[ 1.665417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
318[ 1.665444] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
319[ 1.665462] usb usb3: Product: Generic Platform OHCI controller
320[ 1.665493] usb usb3: Manufacturer: Linux 4.4.143-39-rockchip-gdaf243b9655a ohci_hcd
321[ 1.665510] usb usb3: SerialNumber: ff450000.usb
322[ 1.666242] hub 3-0:1.0: USB hub found
323[ 1.666302] hub 3-0:1.0: 1 port detected
324[ 1.668067] i2c /dev entries driver
325[ 1.671216] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
326[ 1.671548] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
327[ 1.672612] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
328[ 1.672654] Bluetooth: Virtual HCI driver ver 1.5
329[ 1.673224] cpu cpu0: leakage=6
330[ 1.673516] cpu cpu0: Failed to get pvtm
331[ 1.674697] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=0 h_limit=0
332[ 1.676163] Synopsys Designware Multimedia Card Interface Driver
333[ 1.677436] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
334[ 1.677512] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
335[ 1.677536] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
336[ 1.677616] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 21,32 bit host data width,256 deep fifo
337[ 1.693368] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
338[ 1.710347] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
339[ 1.712741] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
340[ 1.712802] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
341[ 1.712831] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
342[ 1.712904] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 22,32 bit host data width,256 deep fifo
343[ 1.712974] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
344[ 1.713032] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
345[ 1.729333] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
346[ 1.742465] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
347[ 1.742556] mmc0: new high speed SDXC card at address 0001
348[ 1.743538] mmcblk0: mmc0:0001 EC2QT 59.6 GiB
349[ 1.746159] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
350[ 1.746963] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
351[ 1.747108] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
352[ 1.747165] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
353[ 1.747189] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a
354[ 1.747265] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
355[ 1.747349] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
356[ 1.747366] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
357[ 1.747748] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
358[ 1.753321] mmcblk0: p1 p2
359[ 1.761358] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
360[ 1.769339] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
361[ 1.777384] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
362[ 1.778617] hidraw: raw HID events driver (C) Jiri Kosina
363[ 1.779161] usbcore: registered new interface driver usbhid
364[ 1.779183] usbhid: USB HID core driver
365[ 1.779447] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
366[ 1.779807] rockchip-dmc dmc: Failed to get leakage
367[ 1.779925] rockchip-dmc dmc: Failed to get pvtm
368[ 1.783432] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
369[ 1.783462] rockchip-dmc dmc: failed to get vop pn to msch rl
370[ 1.783479] rockchip-dmc dmc: don't add devfreq feature
371[ 1.784578] rknandc_base v1.1 2017-01-11
372[ 1.784774] rksfc_base v1.1 2016-01-08
373[ 1.785571] dwmmc_rockchip ff4a0000.dwmmc: card claims to support voltages below defined range
374[ 1.789754] dummy_codec dummy-codec: Unable to get mclk
375[ 1.790431] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio
376[ 1.790546] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio
377[ 1.790653] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
378[ 1.790667] rk3308-acodec ff560000.acodec: De-pop as much as possible
379[ 1.790814] The acodec version is: b
380[ 1.796715] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
381[ 1.798033] mmc2: new high speed SDIO card at address 0001
382[ 1.809333] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
383[ 1.850993] rk-multicodecs acodec-sound: rk3308-hifi <-> ff320000.i2s mapping ok
384[ 1.852325] input: rockchip,rk3308-acodec Headphones as /devices/platform/acodec-sound/sound/card1/input0
385[ 1.853073] u32 classifier
386[ 1.853123] Netfilter messages via NETLINK v0.30.
387[ 1.853410] ip_set: protocol 6
388[ 1.853438] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
389[ 1.853765] ip_tables: (C) 2000-2006 Netfilter Core Team
390[ 1.853825] Initializing XFRM netlink socket
391[ 1.854520] NET: Registered protocol family 10
392[ 1.855943] ip6_tables: (C) 2000-2006 Netfilter Core Team
393[ 1.855991] NET: Registered protocol family 17
394[ 1.856036] NET: Registered protocol family 15
395[ 1.856104] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
396[ 1.856959] Bridge firewalling registered
397[ 1.857138] Bluetooth: RFCOMM TTY layer initialized
398[ 1.857242] Bluetooth: RFCOMM socket layer initialized
399[ 1.857323] Bluetooth: RFCOMM ver 1.11
400[ 1.857360] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
401[ 1.857380] Bluetooth: HIDP socket layer initialized
402[ 1.857402] 8021q: 802.1Q VLAN Support v1.8
403[ 1.857456] [WLAN_RFKILL]: Enter rfkill_wlan_init
404[ 1.858075] [WLAN_RFKILL]: Enter rfkill_wlan_probe
405[ 1.858111] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
406[ 1.858131] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
407[ 1.858144] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
408[ 1.858238] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 0.
409[ 1.858306] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
410[ 1.858323] [WLAN_RFKILL]: Exit rfkill_wlan_probe
411[ 1.858418] [BT_RFKILL]: Enter rfkill_rk_init
412[ 1.858905] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
413[ 1.858953] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
414[ 1.859014] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
415[ 1.859038] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
416[ 1.859116] [BT_RFKILL]: Request irq for bt wakeup host
417[ 1.859184] [BT_RFKILL]: ** disable irq
418[ 1.859426] [BT_RFKILL]: bt_default device registered.
419[ 1.859546] Key type dns_resolver registered
420[ 1.859916] flash vendor_init_thread!
421[ 1.859939] flash vendor storage:20170308 ret = -1
422[ 1.861008] registered taskstats version 1
423[ 1.861265] rk3308-acodec ff560000.acodec: Don't need to change dac_output: 0
424[ 1.880323] Key type encrypted registered
425[ 1.881093] hctosys: unable to open rtc device (rtc0)
426[ 1.897566] ALSA device list:
427[ 1.897611] #0: Loopback 1
428[ 1.897622] #1: rockchip,rk3308-acodec
429[ 1.898028] RAMDISK: gzip image found at block 0
430[ 2.000208] RAMDISK: incomplete write (344 != 3580)
431[ 2.000266] write error
432[ 2.000365] Waiting for root device UUID=37055840-4ec4-444f-979b-9e47ee4bd848...
433[ 4.881330] vendor storage:20160801 ret = -1