· 6 years ago · Feb 14, 2020, 11:24 AM
1/ # dmesg
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Linux version 3.18.31-TeamGhost-gdf100350-dirty (darkness@darkness-hidden-org-server) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Feb 14 16:04:42 WIB 2020
6[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
7[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
8[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8917-PMI8937 QRD SKU5
9[ 0.000000] efi: Getting EFI parameters from FDT:
10[ 0.000000] efi: UEFI not found.
11[ 0.000000] Reserved memory: reserved region for node 'other_ext_region@0': base 0x0000000084a00000, size 30 MiB
12[ 0.000000] Reserved memory: reserved region for node 'modem_region@0': base 0x0000000086800000, size 80 MiB
13[ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x000000008b800000, size 17 MiB
14[ 0.000000] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x000000008c900000, size 7 MiB
15[ 0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x0000000090000000, size 20 MiB
16[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
17[ 0.000000] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
18[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 80 MiB
19[ 0.000000] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
20[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b800000, size 17 MiB
21[ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
22[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c900000, size 7 MiB
23[ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
24[ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
25[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
26[ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
27[ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f9000000, size 112 MiB
28[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f9000000, size 112 MiB
29[ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
30[ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f8000000, size 16 MiB
31[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 16 MiB
32[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
33[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f7c00000, size 4 MiB
34[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7c00000, size 4 MiB
35[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
36[ 0.000000] cma: Reserved 16 MiB at 0x00000000f6c00000
37[ 0.000000] On node 0 totalpages: 510464
38[ 0.000000] DMA zone: 8192 pages used for memmap
39[ 0.000000] DMA zone: 0 pages reserved
40[ 0.000000] DMA zone: 510464 pages, LIFO batch:31
41[ 0.000000] psci: probing for conduit method from DT.
42[ 0.000000] psci: PSCIv1.0 detected in firmware.
43[ 0.000000] psci: Using standard PSCI v0.2 function IDs
44[ 0.000000] psci: Initializing psci_cpu_init
45[ 0.000000] psci: Initializing psci_cpu_init
46[ 0.000000] psci: Initializing psci_cpu_init
47[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc076a30000 s22144 r8192 d31104 u61440
48[ 0.000000] pcpu-alloc: s22144 r8192 d31104 u61440 alloc=15*4096
49[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
50[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502272
51[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78B0000 androidboot.selinux=permissive buildvariant=userdebug androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=47b3c1647d04 device_locked=0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_nt35521s_ebbg_720p_video:1:none:cfg:single_dsi board_id=S88503BC1:board_gpio_num=11 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78B0000 androidboot.selinux=permissive androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=bf5d2357d640 device_locked=0 androidboot.<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
52[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
53[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
54[ 0.000000] Memory: 1712552K/2041856K available (12967K kernel code, 2085K rwdata, 6968K rodata, 508K init, 2491K bss, 329304K reserved)
55[ 0.000000] Virtual kernel memory layout:
56[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
57[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
58[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 MB actual)
59[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
60[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
61[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
62[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
63[ 0.000000] .init : 0xffffffc0013fa000 - 0xffffffc001479000 ( 508 KB)
64[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0013f9c64 ( 19944 KB)
65[ 0.000000] .data : 0xffffffc001496000 - 0xffffffc00169f400 ( 2085 KB)
66[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
67[ 0.000000] HMP scheduling enabled.
68[ 0.000000] Preemptible hierarchical RCU implementation.
69[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
70[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
71[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
72[ 0.000000] NR_IRQS:64 nr_irqs:64 0
73[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
74[ 0.000000] MPM 1 irq mapping errored -517
75[ 0.000000] Offload RCU callbacks from all CPUs
76[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
77[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
78[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
79[ 0.000020] Switched to clocksource arch_sys_counter
80[ 0.000617] Console: colour dummy device 80x25
81[ 0.002551] allocated 8388608 bytes of page_cgroup
82[ 0.002558] please try 'cgroup_disable=memory' option if you don't want memory cgroups
83[ 0.002570] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
84[ 0.002582] pid_max: default: 32768 minimum: 301
85[ 0.002656] Security Framework initialized
86[ 0.002682] AppArmor: AppArmor initialized
87[ 0.002688] Yama: becoming mindful.
88[ 0.002752] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
89[ 0.002764] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
90[ 0.003424] Initializing cgroup subsys memory
91[ 0.003446] Initializing cgroup subsys devices
92[ 0.003459] Initializing cgroup subsys freezer
93[ 0.003470] Initializing cgroup subsys blkio
94[ 0.003481] Initializing cgroup subsys perf_event
95[ 0.003707] /cpus/cpu-map/cluster0: empty cluster
96[ 0.003817] /cpus/cpu@100: Missing clock-frequency property
97[ 0.003834] /cpus/cpu@101: Missing clock-frequency property
98[ 0.003853] /cpus/cpu@102: Missing clock-frequency property
99[ 0.003873] /cpus/cpu@103: Missing clock-frequency property
100[ 0.003913] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
101[ 0.003948] EFI services will not be available.
102[ 0.012873]
103[ 0.012873] **********************************************************
104[ 0.012885] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
105[ 0.012892] ** **
106[ 0.012898] ** trace_printk() being used. Allocating extra memory. **
107[ 0.012905] ** **
108[ 0.012911] ** This means that this is a DEBUG kernel and it is **
109[ 0.012918] ** unsafe for produciton use. **
110[ 0.012925] ** **
111[ 0.012931] ** If you see this message and you are not debugging **
112[ 0.012938] ** the kernel, report this immediately to your vendor! **
113[ 0.012944] ** **
114[ 0.012950] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
115[ 0.012957] **********************************************************
116[ 0.015360] MSM Memory Dump base table set up
117[ 0.015387] MSM Memory Dump apps data table set up
118[ 0.015446] Configuring XPU violations to be fatal errors
119[ 0.024251] Brought up 4 CPUs
120[ 0.024264] SMP: Total of 4 processors activated.
121[ 0.024302] alternatives: patching kernel code
122[ 0.025035] devtmpfs: initialized
123[ 0.027209] evm: security.selinux
124[ 0.027218] evm: security.SMACK64
125[ 0.027225] evm: security.capability
126[ 0.029043] DMI not present or invalid.
127[ 0.037759] pinctrl core: initialized pinctrl subsystem
128[ 0.038246] regulator-dummy: no parameters
129[ 0.099637] NET: Registered protocol family 16
130[ 0.102933] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
131[ 0.120090] cpuidle: using governor ladder
132[ 0.140088] cpuidle: using governor menu
133[ 0.160087] cpuidle: using governor qcom
134[ 0.161795] vdso: 2 pages (1 code @ ffffffc00149d000, 1 data @ ffffffc00149c000)
135[ 0.162835] software IO TLB [mem 0xf2800000-0xf2c00000] (4MB) mapped at [ffffffc072800000-ffffffc072bfffff]
136[ 0.163949] DMA: preallocated 256 KiB pool for atomic allocations
137[ 0.171125] __of_mpm_init(): MPM driver mapping exists
138[ 0.180795] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
139[ 0.206076] sps:sps is ready.
140[ 0.209243] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
141[ 0.209369] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
142[ 0.209379] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
143[ 0.209392] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
144[ 0.209404] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
145[ 0.211656] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
146[ 0.211839] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
147[ 0.211853] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
148[ 0.212549] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
149[ 0.212706] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
150[ 0.212719] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
151[ 0.213422] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
152[ 0.213579] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
153[ 0.213592] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
154[ 0.213845] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
155[ 0.213856] msm_rpm_dev_probe: APSS-RPM communication over SMD
156[ 0.215191] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
157[ 0.216677] pm8917_s5: 1050 <--> 1350 mV at 1225 mV normal idle
158[ 0.216897] spm_regulator_probe: name=pm8917_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
159[ 0.222068] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
160[ 0.222083] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
161[ 0.224739] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
162[ 0.225113] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
163[ 0.229860] smd_channel_probe_now: allocation table not initialized
164[ 0.231211] smd_channel_probe_now: allocation table not initialized
165[ 0.232294] smd_channel_probe_now: allocation table not initialized
166[ 0.233796] msm-sn-fuse a0128.snfuse: SN interface initialized
167[ 0.234043] msm-secboot-fuse a41d0.secbootfuse: Secboot-fuse interface initialized
168[ 0.240232] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
169[ 0.241291] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
170[ 0.241803] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
171[ 0.242313] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
172[ 0.242634] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
173[ 0.243272] ACC: mem_acc_efuse_init: efuse_addr = 0x00000000000a4000 (len=0x1000)
174[ 0.243460] ACC: mem_acc_parse_override_fuse_version_map: qcom,override-fuse-version-map tuple match not found
175[ 0.243606] mem_acc_corner: 0 <--> 0 mV at 0 mV
176[ 0.244619] cpr_efuse_init: apc_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
177[ 0.244657] cpr_read_fuse_revision: apc_corner: fuse revision = 2
178[ 0.244672] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0xff8c821f691bec3, speed_bits = 0
179[ 0.244687] cpr_parse_pvs_version_fuse: apc_corner: [row: 37]: 0xff8c821f691bec3, pvs_version = 0
180[ 0.244772] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1095000 -> 1125000 uV
181[ 0.244786] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1145000 -> 1150000 uV
182[ 0.244800] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1260000 -> 1270000 uV
183[ 0.244815] cpr_pvs_init: apc_corner: pvs voltage: [1125000 1150000 1270000] uV
184[ 0.244826] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
185[ 0.244837] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
186[ 0.245029] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
187[ 0.245056] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
188[ 0.245086] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248e5a63eea12d69
189[ 0.245108] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 918
190[ 0.245119] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1006
191[ 0.245129] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1205
192[ 0.245157] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 968
193[ 0.245170] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1046
194[ 0.245182] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1255
195[ 0.245270] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.582
196[ 0.245280] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.680
197[ 0.245294] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 968
198[ 0.245302] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1046
199[ 0.245311] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1151
200[ 0.245319] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1255
201[ 0.245327] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1255
202[ 0.245498] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
203[ 0.245894] apc_corner: 0 <--> 0 mV
204[ 0.255454] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
205[ 0.256312] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
206[ 0.256456] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
207[ 0.256466] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
208[ 0.256479] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
209[ 0.256490] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
210[ 0.256862] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
211[ 0.257044] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
212[ 0.257058] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
213[ 0.257424] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
214[ 0.257580] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
215[ 0.257593] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
216[ 0.257965] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
217[ 0.258121] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
218[ 0.258134] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
219[ 0.258258] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
220[ 0.258269] msm_rpm_dev_probe: APSS-RPM communication over SMD
221[ 0.259095] pm8917_s1: 1000 <--> 1225 mV at 1000 mV normal idle
222[ 0.259976] pm8917_s2_level: 0 <--> 0 mV at 0 mV normal idle
223[ 0.260616] pm8917_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
224[ 0.261218] pm8917_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
225[ 0.262025] pm8917_s3: 1300 mV normal idle
226[ 0.262855] pm8917_s4: 2050 mV normal idle
227[ 0.263663] pm8917_l2: 1200 mV normal idle
228[ 0.264497] pm8917_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
229[ 0.265088] pm8917_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
230[ 0.265906] pm8917_l5: 1800 mV normal idle
231[ 0.266948] pm8917_l6: 1800 mV normal idle
232[ 0.267775] pm8917_l7: 1800 mV normal idle
233[ 0.268362] pm8917_l7_ao: 1800 mV normal idle
234[ 0.269186] pm8917_l8: 2850 <--> 2900 mV at 2900 mV normal idle
235[ 0.269990] pm8917_l9: 3000 <--> 3300 mV at 3000 mV normal idle
236[ 0.270853] pm8917_l10: 2800 <--> 3000 mV at 2800 mV normal idle
237[ 0.271661] pm8917_l11: 2950 mV normal idle
238[ 0.272495] pm8917_l12: 1800 <--> 2950 mV at 1800 mV normal idle
239[ 0.273296] pm8917_l13: 3075 mV normal idle
240[ 0.274129] pm8917_l14: 1800 <--> 3300 mV at 1800 mV normal idle
241[ 0.274934] pm8917_l15: 1800 <--> 3300 mV at 1800 mV normal idle
242[ 0.275755] pm8917_l16: 1800 mV normal idle
243[ 0.276560] pm8917_l17: 2800 <--> 2900 mV at 2800 mV normal idle
244[ 0.277401] pm8917_l19: 1225 <--> 1350 mV at 1225 mV normal idle
245[ 0.278204] pm8917_l22: 2800 mV normal idle
246[ 0.279035] pm8917_l23: 1200 mV normal idle
247[ 0.280189] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
248[ 0.302099] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
249[ 0.302316] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
250[ 0.302329] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
251[ 0.303611] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 0 and 3)
252[ 0.303621] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1125000
253[ 0.303630] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1270000
254[ 0.304912] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
255[ 0.305327] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
256[ 0.306685] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
257[ 0.306974] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
258[ 0.307230] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
259[ 0.307242] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
260[ 0.309413] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
261[ 0.309684] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
262[ 0.309696] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
263[ 0.311391] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
264[ 0.311656] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
265[ 0.311669] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
266[ 0.392558] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
267[ 0.395258] KPI: Bootloader start count = 47549
268[ 0.395270] KPI: Bootloader end count = 135379
269[ 0.395278] KPI: Bootloader display count = 112715
270[ 0.395285] KPI: Bootloader load kernel count = 1514
271[ 0.395294] KPI: Kernel MPM timestamp = 154746
272[ 0.395301] KPI: Kernel MPM Clock frequency = 32768
273[ 0.395327] socinfo_print: v0.10, id=303, ver=1.0, raw_id=86, raw_ver=0, hw_plat=8, hw_plat_ver=65536
274[ 0.395327] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=4136746691
275[ 0.396356] qpnp_pin_of_gpio_xlate: no such PMIC gpio 7 in device topology
276[ 0.396532] eldo2_pm8917: no parameters
277[ 0.397792] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
278[ 0.398197] tps65132-pos: 5000 mV
279[ 0.398599] tps65132-neg: 5000 mV
280[ 0.399108] vgaarb: loaded
281[ 0.400379] SCSI subsystem initialized
282[ 0.401437] usbcore: registered new interface driver usbfs
283[ 0.401522] usbcore: registered new interface driver hub
284[ 0.401671] usbcore: registered new device driver usb
285[ 0.402478] media: Linux media interface: v0.10
286[ 0.402552] Linux video capture interface: v2.00
287[ 0.402650] EDAC MC: Ver: 3.0.0
288[ 0.404778] cpufreq: driver msm up and running
289[ 0.404914] aw2013 led driver: initialize.aw2013_led_probe start
290[ 0.531097] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
291[ 0.531326] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
292[ 0.531671] ION heap system created
293[ 0.531786] ION heap mm created at 0x00000000f9000000 with size 7000000
294[ 0.531801] ION heap qsecom created at 0x00000000f8000000 with size 1000000
295[ 0.532310] msm_bus_fabric_init_driver
296[ 0.545933] heming add qpnp_pon_probe
297[ 0.546002] qcom,qpnp-power-on qpnp-power-on-5: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'cold' boot
298[ 0.546019] qcom,qpnp-power-on qpnp-power-on-5: PMIC@SID0: Unknown power-off reason
299[ 0.546217] input: qpnp_pon as /devices/virtual/input/input0
300[ 0.546767] heming add qpnp_pon_probe end
301[ 0.546912] PMIC@SID0: PM8937 v1.0 options: 2, 2, 0, 0
302[ 0.548385] gdsc_venus: no parameters
303[ 0.548751] gdsc_mdss: no parameters
304[ 0.549073] gdsc_jpeg: no parameters
305[ 0.549637] gdsc_vfe: no parameters
306[ 0.550255] gdsc_vfe1: no parameters
307[ 0.550594] gdsc_cpp: no parameters
308[ 0.550911] gdsc_oxili_gx: no parameters
309[ 0.551181] gdsc_venus_core0: fast normal
310[ 0.551898] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
311[ 0.551909] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
312[ 0.552530] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
313[ 0.553542] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff80014a0000, with 1 ctx banks
314[ 0.554273] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001b80000, with 21 ctx banks
315[ 0.562037] msm_iommu_ctx 1f08000.qcom,iommu-ctx: context gfx3d_user using bank 0
316[ 0.562228] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
317[ 0.562405] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
318[ 0.562583] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
319[ 0.562762] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
320[ 0.562944] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
321[ 0.563120] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
322[ 0.563298] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
323[ 0.563508] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
324[ 0.563715] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
325[ 0.563931] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
326[ 0.564140] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
327[ 0.564351] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
328[ 0.564564] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
329[ 0.564772] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
330[ 0.564985] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
331[ 0.565194] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
332[ 0.565407] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
333[ 0.565618] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
334[ 0.565829] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
335[ 0.566043] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
336[ 0.566257] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
337[ 0.569455] Advanced Linux Sound Architecture Driver Initialized.
338[ 0.570257] aw87319_pa_init Enter
339[ 0.570775] Bluetooth: ffffffc07406fcf8
340[ 0.570806] NET: Registered protocol family 31
341[ 0.570810] Bluetooth: ffffffc07406fcf8
342[ 0.570820] Bluetooth: ffffffc07406fcd8Bluetooth: ffffffc07406fca8
343[ 0.570855] Bluetooth: ffffffc07406fcb8<6>[ 0.571223] cfg80211: Calling CRDA to update world regulatory domain
344[ 0.571243] cfg80211: World regulatory domain updated:
345[ 0.571248] cfg80211: DFS Master region: unset
346[ 0.571252] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
347[ 0.571259] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
348[ 0.571265] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
349[ 0.571271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
350[ 0.571277] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
351[ 0.571283] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
352[ 0.571288] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
353[ 0.571294] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
354[ 0.571300] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
355[ 0.571317] NetLabel: Initializing
356[ 0.571323] NetLabel: domain hash size = 128
357[ 0.571327] NetLabel: protocols = UNLABELED CIPSOv4
358[ 0.571370] NetLabel: unlabeled traffic allowed by default
359[ 0.571528] pcie:pcie_init.
360[ 0.574112] Switched to clocksource arch_sys_counter
361[ 0.611991] AppArmor: AppArmor Filesystem Enabled
362[ 0.620700] NET: Registered protocol family 2
363[ 0.621234] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
364[ 0.621351] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
365[ 0.621569] TCP: Hash tables configured (established 16384 bind 16384)
366[ 0.621624] TCP: reno registered
367[ 0.621633] UDP hash table entries: 1024 (order: 3, 32768 bytes)
368[ 0.621670] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
369[ 0.621826] NET: Registered protocol family 1
370[ 0.621862] PCI: CLS 0 bytes, default 64
371[ 0.623006] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
372[ 0.624228] Trying to unpack rootfs image as initramfs...
373[ 0.774836] Freeing initrd memory: 4008K (ffffffc003600000 - ffffffc0039ea000)
374[ 0.779416] futex hash table entries: 1024 (order: 4, 65536 bytes)
375[ 0.779504] audit: initializing netlink subsys (disabled)
376[ 0.779549] audit: type=2000 audit(0.769:1): initialized
377[ 0.781442] vmscan: error setting kswapd cpu affinity mask
378[ 0.785992] zbud: loaded
379[ 0.786528] VFS: Disk quotas dquot_6.5.2
380[ 0.786650] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
381[ 0.788677] Registering sdcardfs 0.1
382[ 0.789223] Key type cifs.idmap registered
383[ 0.789346] fuse init (API version 7.23)
384[ 0.789673] msgmni has been set to 3664
385[ 0.791674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
386[ 0.791687] io scheduler noop registered
387[ 0.791696] io scheduler deadline registered
388[ 0.791801] io scheduler cfq registered (default)
389[ 0.796496] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
390[ 0.796508] mdss_mdp_probe+0x220/0x11ac->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
391[ 0.797116] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
392[ 0.797893] No change in context(0==0), skip
393[ 0.798340] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
394[ 0.798363] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
395[ 0.798369] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
396[ 0.798388] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
397[ 0.798405] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
398[ 0.798417] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
399[ 0.798523] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
400[ 0.798826] xlog_status: enable:1, panic:1, dump:2
401[ 0.799624] mdss_mdp_probe: mdss version = 0x100f0000, bootloader display is on, num 1, intf_sel=0x00000100
402[ 0.802720] mdss_smmu_util_parse_dt_clock: clocks are not defined
403[ 0.802784] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
404[ 0.802820] mdss_smmu_util_parse_dt_clock: clocks are not defined
405[ 0.802863] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
406[ 0.804961] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
407[ 0.805604] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_nt35521s_ebbg_720p_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_nt35521s_ebbg_720p_video
408[ 0.805645] mdss_dsi_panel_init: Panel Name = nt35521s_HD720p_video_EBBG_c3a
409[ 0.805818] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35521s_ebbg_720p_video" (ffffffc07406f2e8)
410[ 0.805839] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
411[ 0.805848] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
412[ 0.805853] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
413[ 0.806019] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-cabc-on-command
414[ 0.806029] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-cabc-off-command
415[ 0.806117] mdss_dsi_parse_panel_features: ulps feature disabled
416[ 0.806125] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
417[ 0.806134] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
418[ 0.806819] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x7 (ok)
419[ 0.807214] mdss_dsi_parse_ctrl_params:3931 Unable to read qcom,display-id, data=0000000000000000,len=45
420[ 0.807228] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
421[ 0.807261] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff8000c5cb80 phy_regulator_size=30
422[ 0.807267] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000c58000 ctrl_size=300 phy_base=ffffff8000c5a400 phy_size=280
423[ 0.807393] dsi_panel_device_register: Continuous splash enabled
424[ 0.807683] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
425[ 0.808466] mdss_dsi_panel_reset: mdss_dsi_panel_reset time=0ms
426[ 0.829052] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
427[ 0.829486] mdss_dsi_status_init: DSI status check interval:2000
428[ 0.830156] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
429[ 0.831249] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
430[ 0.832033] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
431[ 0.832529] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
432[ 0.832702] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
433[ 0.832807] mdss_mdp_splash_parse_dt: splash mem child node is not present
434[ 0.836844] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
435[ 0.836882] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
436[ 0.841616] In memshare_probe, Memshare probe success
437[ 0.844320] msm_rpm_log_probe: OK
438[ 0.848347] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
439[ 0.850883] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
440[ 0.872959] brd: module loaded
441[ 0.875586] loop: module loaded
442[ 0.875980] zram: Created 1 device(s) ...
443[ 0.876571] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
444[ 0.876603] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
445[ 0.876611] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
446[ 0.876617] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
447[ 0.877368] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
448[ 0.880715] i2c-core: driver [tabla-i2c-core] using legacy suspend method
449[ 0.880722] i2c-core: driver [tabla-i2c-core] using legacy resume method
450[ 0.880824] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
451[ 0.880829] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
452[ 0.880929] i2c-core: driver [tasha-i2c-core] using legacy suspend method
453[ 0.880934] i2c-core: driver [tasha-i2c-core] using legacy resume method
454[ 0.881762] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
455[ 0.882943] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
456[ 0.882954] qce 720000.qcedev: CE device = 0x0
457[ 0.882954] , IO base, CE = 0xffffff80019c0000
458[ 0.882954] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
459[ 0.882954] IO base BAM = 0x (null)
460[ 0.882954] BAM IRQ 214
461[ 0.882954] Engines Availability = 0x2010853
462[ 0.883198] sps:BAM 0x0000000000704000 is registered.
463[ 0.883438] sps:BAM 0x0000000000704000 (va:0xffffff8001dc0000) enabled: ver:0x27, number of pipes:8
464[ 0.883692] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 214
465[ 0.886268] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
466[ 0.886960] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
467[ 0.886971] qcrypto 720000.qcrypto: CE device = 0x0
468[ 0.886971] , IO base, CE = 0xffffff8001e00000
469[ 0.886971] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
470[ 0.886971] IO base BAM = 0x (null)
471[ 0.886971] BAM IRQ 214
472[ 0.886971] Engines Availability = 0x2010853
473[ 0.887318] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 214
474[ 0.888967] qcrypto 720000.qcrypto: qcrypto-ecb-aes
475[ 0.889067] qcrypto 720000.qcrypto: qcrypto-cbc-aes
476[ 0.889162] qcrypto 720000.qcrypto: qcrypto-ctr-aes
477[ 0.889254] qcrypto 720000.qcrypto: qcrypto-ecb-des
478[ 0.889347] qcrypto 720000.qcrypto: qcrypto-cbc-des
479[ 0.889442] qcrypto 720000.qcrypto: qcrypto-ecb-3des
480[ 0.889534] qcrypto 720000.qcrypto: qcrypto-cbc-3des
481[ 0.889627] qcrypto 720000.qcrypto: qcrypto-xts-aes
482[ 0.889721] qcrypto 720000.qcrypto: qcrypto-sha1
483[ 0.889813] qcrypto 720000.qcrypto: qcrypto-sha256
484[ 0.889907] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
485[ 0.889999] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
486[ 0.890193] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
487[ 0.890287] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
488[ 0.890381] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
489[ 0.890474] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
490[ 0.890568] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
491[ 0.890664] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
492[ 0.890757] qcrypto 720000.qcrypto: qcrypto-aes-ccm
493[ 0.890851] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
494[ 0.892134] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
495[ 0.892348] ICE IRQ = 216
496[ 0.893685] SCSI Media Changer driver v0.25
497[ 0.895046] tun: Universal TUN/TAP device driver, 1.6
498[ 0.895052] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
499[ 0.897957] PPP generic driver version 2.4.2
500[ 0.898109] PPP BSD Compression module registered
501[ 0.898118] PPP Deflate Compression module registered
502[ 0.898137] PPP MPPE Compression module registered
503[ 0.898150] NET: Registered protocol family 24
504[ 0.898938] wcnss_wlan probed in built-in mode
505[ 0.900830] usbcore: registered new interface driver asix
506[ 0.900904] usbcore: registered new interface driver ax88179_178a
507[ 0.900954] usbcore: registered new interface driver cdc_ether
508[ 0.900997] usbcore: registered new interface driver net1080
509[ 0.901041] usbcore: registered new interface driver cdc_subset
510[ 0.901084] usbcore: registered new interface driver zaurus
511[ 0.901284] usbcore: registered new interface driver cdc_ncm
512[ 0.901749] msm_sharedmem: sharedmem_register_qmi: qmi init successful
513[ 0.902744] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
514[ 0.902751] hyp_assign_table: Failed to assign memory protection, ret = -5
515[ 0.902760] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f7100000 size=1572864 err=-5
516[ 0.902948] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
517[ 0.903645] msm_otg 78db000.usb: msm_otg probe
518[ 0.907403] msm_otg 78db000.usb: OTG regs = ffffff80014fc000
519[ 0.913566] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
520[ 0.913964] ehci-pci: EHCI PCI platform driver
521[ 0.914018] ehci-msm: Qualcomm On-Chip EHCI Host Controller
522[ 0.914572] Unable to get vbus_otg
523[ 0.914582] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
524[ 0.914693] usbcore: registered new interface driver cdc_acm
525[ 0.914698] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
526[ 0.914762] usbcore: registered new interface driver usb-storage
527[ 0.914802] usbcore: registered new interface driver ums-alauda
528[ 0.914841] usbcore: registered new interface driver ums-cypress
529[ 0.914879] usbcore: registered new interface driver ums-datafab
530[ 0.914917] usbcore: registered new interface driver ums-freecom
531[ 0.914955] usbcore: registered new interface driver ums-isd200
532[ 0.914995] usbcore: registered new interface driver ums-jumpshot
533[ 0.915034] usbcore: registered new interface driver ums-karma
534[ 0.915072] usbcore: registered new interface driver ums-sddr09
535[ 0.915110] usbcore: registered new interface driver ums-sddr55
536[ 0.915150] usbcore: registered new interface driver ums-usbat
537[ 0.915255] usbcore: registered new interface driver usbserial
538[ 0.915304] usbcore: registered new interface driver usb_ehset_test
539[ 0.916092] gbridge_init: gbridge_init successs.
540[ 0.917119] mousedev: PS/2 mouse device common for all mice
541[ 0.917390] usbcore: registered new interface driver xpad
542[ 0.919205] input: ft5346 as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1
543[ 1.150310] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
544[ 1.150526] ft5x06_720p 3-0038: Device ID = 0x54
545[ 1.150853] ft5x06_720p 3-0038: report rate = 110Hz
546[ 1.151452] ft5x06_720p 3-0038: Firmware version = 16.0.0
547[ 1.151607] ft5x06_720p 3-0038: WT: fw vendor id = 81
548[ 1.550196] ft5x06_720p 3-0038: Lockdown info: 34 37 31 01 C3 01 34 00
549[ 1.550203] ft5x06_720p 3-0038: WT: TP_Maker = 0x34
550[ 1.550209] ft5x06_720p 3-0038: WT: LCD_Maker = 0x37
551[ 1.550214] ft5x06_720p 3-0038: WT: Panel_Ink = 0x31
552[ 1.550220] ft5x06_720p 3-0038: WT: Project_Id = 0xc3
553[ 1.550294] ft5x06_720p 3-0038: has no androidboot.mode
554[ 1.550300] ft5x06_720p 3-0038: upgrade
555[ 1.610482] FT5X06-TP-TAG INFO:Vendor ID:0x51, TP FW:0x10, IC TYPE:84
556[ 1.610640] ft5x06_720p 3-0038: Set hardwareinfo is: o-film, FT5435, FW:0x10, White
557[ 1.612071] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
558[ 1.612236] i2c /dev entries driver
559[ 1.618210] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
560[ 1.618879] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
561[ 1.618886] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
562[ 1.618899] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
563[ 1.618984] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
564[ 1.619318] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
565[ 1.620306] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
566[ 1.620312] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
567[ 1.620324] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
568[ 1.622954] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
569[ 1.626285] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
570[ 1.627614] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
571[ 1.630528] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
572[ 1.631955] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
573[ 1.633350] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
574[ 1.634698] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
575[ 1.634705] msm_actuator_platform_probe:1977 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
576[ 1.634867] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
577[ 1.635802] msm_eeprom_platform_probe qcom,eeprom-name ov13850, rc 0
578[ 1.635914] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
579[ 1.661670] msm_cci_init:1431: hw_version = 0x10020006
580[ 1.662145] msm_cci_irq:1783 MASTER_0 error 0x8000000
581[ 2.160063] msm_cci_wait: 301 wait for queue: 0
582[ 2.160070] msm_cci_transfer_end: 548 failed rc -110
583[ 2.160075] msm_cci_data_queue: 808 failed rc -110
584[ 2.160080] msm_camera_cci_i2c_write: line 135 rc = -110
585[ 2.180053] msm_cci_i2c_read:955 read_words = 0, exp words = 1
586[ 2.180058] msm_cci_i2c_read_bytes:1038 failed rc -22
587[ 2.180063] msm_camera_cci_i2c_read: line 47 rc = -22
588[ 2.180472] msm_cci_irq:1783 MASTER_0 error 0x10000000
589[ 2.680060] msm_cci_wait: 301 wait for queue: 0
590[ 2.680067] msm_cci_transfer_end: 548 failed rc -110
591[ 2.680071] msm_cci_data_queue: 808 failed rc -110
592[ 2.680076] msm_camera_cci_i2c_write: line 135 rc = -110
593[ 2.690038] eeprom_init_ov13850_reg_otp 46 E temp=0x0
594[ 2.690476] msm_cci_irq:1783 MASTER_0 error 0x8000000
595[ 3.190060] msm_cci_wait: 301 wait for queue: 0
596[ 3.190067] msm_cci_transfer_end: 548 failed rc -110
597[ 3.190071] msm_cci_data_queue: 808 failed rc -110
598[ 3.190076] msm_camera_cci_i2c_write: line 135 rc = -110
599[ 3.200470] msm_cci_irq:1783 MASTER_0 error 0x8000000
600[ 3.700060] msm_cci_wait: 301 wait for queue: 0
601[ 3.700067] msm_cci_transfer_end: 548 failed rc -110
602[ 3.700071] msm_cci_data_queue: 808 failed rc -110
603[ 3.700076] msm_camera_cci_i2c_write: line 135 rc = -110
604[ 3.710470] msm_cci_irq:1783 MASTER_0 error 0x8000000
605[ 4.080440] sps: BAM device 0x0000000007884000 is not registered yet.
606[ 4.080678] sps:BAM 0x0000000007884000 is registered.
607[ 4.080842] sps:BAM 0x0000000007884000 (va:0xffffff80019a0000) enabled: ver:0x19, number of pipes:12
608[ 4.210068] msm_cci_wait: 301 wait for queue: 0
609[ 4.210075] msm_cci_transfer_end: 548 failed rc -110
610[ 4.210080] msm_cci_data_queue: 808 failed rc -110
611[ 4.210086] msm_camera_cci_i2c_write: line 135 rc = -110
612[ 4.220476] msm_cci_irq:1783 MASTER_0 error 0x8000000
613[ 4.720064] msm_cci_wait: 301 wait for queue: 0
614[ 4.720070] msm_cci_transfer_end: 548 failed rc -110
615[ 4.720075] msm_cci_data_queue: 808 failed rc -110
616[ 4.720080] msm_camera_cci_i2c_write: line 135 rc = -110
617[ 4.730471] msm_cci_irq:1783 MASTER_0 error 0x8000000
618[ 5.230062] msm_cci_wait: 301 wait for queue: 0
619[ 5.230068] msm_cci_transfer_end: 548 failed rc -110
620[ 5.230073] msm_cci_data_queue: 808 failed rc -110
621[ 5.230077] msm_camera_cci_i2c_write: line 135 rc = -110
622[ 5.250037] i2c write faild
623[ 5.250057] msm_cci_i2c_read:955 read_words = 0, exp words = 4
624[ 5.250062] msm_cci_i2c_read_bytes:1038 failed rc -22
625[ 5.250068] read_eeprom_memory: read failed
626[ 5.250072] msm_eeprom_platform_probe read_eeprom_memory failed
627[ 5.274525] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@0 failed with error -22
628[ 5.274981] msm_eeprom_platform_probe qcom,eeprom-name s5k5e8_ofilm, rc 0
629[ 5.275124] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
630[ 5.317951] msm_cci_init:1431: hw_version = 0x10020006
631[ 5.318421] msm_cci_irq:1783 MASTER_0 error 0x8000000
632[ 5.810060] msm_cci_wait: 301 wait for queue: 0
633[ 5.810067] msm_cci_transfer_end: 548 failed rc -110
634[ 5.810071] msm_cci_data_queue: 808 failed rc -110
635[ 5.810077] msm_camera_cci_i2c_write: line 135 rc = -110
636[ 5.830039] read_eeprom_memory: page write failed
637[ 5.830044] msm_eeprom_platform_probe read_eeprom_memory failed
638[ 5.871498] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@2 failed with error -110
639[ 5.871898] msm_eeprom_platform_probe qcom,eeprom-name s5k3l2, rc 0
640[ 5.872006] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
641[ 5.897797] msm_cci_init:1431: hw_version = 0x10020006
642[ 5.898271] msm_cci_irq:1783 MASTER_0 error 0x10000000
643[ 5.898303] msm_cci_i2c_read:955 read_words = 0, exp words = 4
644[ 5.898308] msm_cci_i2c_read_bytes:1038 failed rc -22
645[ 5.898319] read_eeprom_memory: read failed
646[ 5.898322] msm_eeprom_platform_probe read_eeprom_memory failed
647[ 5.922686] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@4 failed with error -22
648[ 5.923082] msm_eeprom_platform_probe qcom,eeprom-name ov5675, rc 0
649[ 5.923218] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
650[ 5.966014] msm_cci_init:1431: hw_version = 0x10020006
651[ 5.966483] msm_cci_irq:1783 MASTER_0 error 0x8000000
652[ 6.460062] msm_cci_wait: 301 wait for queue: 0
653[ 6.460068] msm_cci_transfer_end: 548 failed rc -110
654[ 6.460073] msm_cci_data_queue: 808 failed rc -110
655[ 6.460078] msm_camera_cci_i2c_write: line 135 rc = -110
656[ 6.480038] read_eeprom_memory: page write failed
657[ 6.480043] msm_eeprom_platform_probe read_eeprom_memory failed
658[ 6.521497] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@5 failed with error -110
659[ 6.521908] msm_eeprom_platform_probe qcom,eeprom-name s5k5e8, rc 0
660[ 6.522050] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
661[ 6.564618] msm_cci_init:1431: hw_version = 0x10020006
662[ 6.565086] msm_cci_irq:1783 MASTER_0 error 0x8000000
663[ 7.060060] msm_cci_wait: 301 wait for queue: 0
664[ 7.060066] msm_cci_transfer_end: 548 failed rc -110
665[ 7.060071] msm_cci_data_queue: 808 failed rc -110
666[ 7.060076] msm_camera_cci_i2c_write: line 135 rc = -110
667[ 7.080039] read_eeprom_memory: page write failed
668[ 7.080044] msm_eeprom_platform_probe read_eeprom_memory failed
669[ 7.121494] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@6 failed with error -110
670[ 7.129569] MSM-CPP cpp_init_hardware:1008 CPP HW Version: 0x40030004
671[ 7.129581] MSM-CPP cpp_init_hardware:1026 stream_cnt:0
672[ 7.132456] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
673[ 7.132465] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
674[ 7.134373] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
675[ 7.134381] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
676[ 7.145648] __msm_jpeg_init:1537] Jpeg Device id 0
677[ 7.149720] unable to find DT imem DLOAD mode node
678[ 7.150273] unable to find DT imem EDLOAD mode node
679[ 7.152198] thermal thermal_zone0: failed to read out thermal zone 0
680[ 7.152422] thermal thermal_zone1: failed to read out thermal zone 1
681[ 7.152638] thermal thermal_zone2: failed to read out thermal zone 2
682[ 7.152855] thermal thermal_zone3: failed to read out thermal zone 3
683[ 7.173979] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
684[ 7.174088] device-mapper: req-crypt: dm-req-crypt successfully initalized.
685[ 7.174088]
686[ 7.175097] sdhci: Secure Digital Host Controller Interface driver
687[ 7.175102] sdhci: Copyright(c) Pierre Ossman
688[ 7.175110] sdhci-pltfm: SDHCI platform and OF driver helper
689[ 7.176032] qcom_ice_get_pdevice: found ice device ffffffc071adf800
690[ 7.176038] qcom_ice_get_pdevice: matching platform device ffffffc072413000
691[ 7.179321] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001990000
692[ 7.179685] sdhci_msm 7824900.sdhci: No vmmc regulator found
693[ 7.179692] sdhci_msm 7824900.sdhci: No vqmmc regulator found
694[ 7.180116] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
695[ 7.209041] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
696[ 7.223872] sdhci_msm 7864900.sdhci: No vmmc regulator found
697[ 7.223882] sdhci_msm 7864900.sdhci: No vqmmc regulator found
698[ 7.224271] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
699[ 7.245215] mmc0: Out-of-interrupt timeout is 50[ms]
700[ 7.245221] mmc0: BKOPS_EN equals 0x2
701[ 7.245226] mmc0: eMMC FW version: 0x07
702[ 7.245230] mmc0: CMDQ supported: depth: 16
703[ 7.245235] mmc0: cache barrier support 0 flush policy 0
704[ 7.251877] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
705[ 7.252108] desc-base: 0xffffff80019fe000 trans-base: 0xffffff8002100000
706[ 7.252108] desc_dma 0xf6c59000 trans_dma: 0xf7280000
707[ 7.252130] mmc0: CMDQ enabled on card
708[ 7.252141] mmc0: new HS400 MMC card at address 0001
709[ 7.252510] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=13 (0xffffffc07112c400)
710[ 7.252622] mmcblk0: mmc0:0001 QE13MB 14.5 GiB
711[ 7.252740] mmcblk0rpmb: mmc0:0001 QE13MB partition 3 4.00 MiB
712[ 7.254442] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
713[ 7.254634] wingtech vib.max_timeout = 50000
714[ 7.255314] tz_log 8600720.tz-log: Hyp log service is not supported
715[ 7.256538] hidraw: raw HID events driver (C) Jiri Kosina
716[ 7.257027] usbcore: registered new interface driver usbhid
717[ 7.257031] usbhid: USB HID core driver
718[ 7.257426] ashmem: initialized
719[ 7.258007] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
720[ 7.262876] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
721[ 7.266285] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
722[ 7.266480] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
723[ 7.269438] usbcore: registered new interface driver snd-usb-audio
724[ 7.289161] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
725[ 7.296592] u32 classifier
726[ 7.296600] Actions configured
727[ 7.296641] Netfilter messages via NETLINK v0.30.
728[ 7.296657] nfnl_acct: registering with nfnetlink.
729[ 7.296703] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
730[ 7.297055] ctnetlink v0.93: registering with nfnetlink.
731[ 7.297796] xt_time: kernel timezone is -0000
732[ 7.298060] ip_tables: (C) 2000-2006 Netfilter Core Team
733[ 7.298212] arp_tables: (C) 2002 David S. Miller
734[ 7.298259] TCP: cubic registered
735[ 7.298267] Initializing XFRM netlink socket
736[ 7.298713] NET: Registered protocol family 10
737[ 7.299648] mip6: Mobile IPv6
738[ 7.299677] ip6_tables: (C) 2000-2006 Netfilter Core Team
739[ 7.299869] sit: IPv6 over IPv4 tunneling driver
740[ 7.300348] NET: Registered protocol family 17
741[ 7.300377] NET: Registered protocol family 15
742[ 7.300417] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
743[ 7.300431] Ebtables v2.0 registered
744[ 7.300581] Bluetooth: ffffffc07406fcb8
745[ 7.300593] Bluetooth: ffffffc07406fca8Bluetooth: ffffffc07406fce8
746[ 7.300629] Bluetooth: ffffffc07406fcc8Bluetooth: ffffffc07406fcc8
747[ 7.300642] Bluetooth: ffffffc07406fca8Bluetooth: ffffffc07406fd18
748[ 7.300659] Bluetooth: ffffffc07406fcf8<6>[ 7.300690] l2tp_core: L2TP core driver, V2.0
749[ 7.300707] l2tp_ppp: PPPoL2TP kernel driver, V2.0
750[ 7.300716] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
751[ 7.300737] l2tp_netlink: L2TP netlink interface
752[ 7.300767] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
753[ 7.300789] l2tp_debugfs: L2TP debugfs support
754[ 7.300799] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
755[ 7.300836] Key type dns_resolver registered
756[ 7.301677] NET: Registered protocol family 27
757[ 7.308229] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
758[ 7.309932] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
759[ 7.310730] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
760[ 7.311089] Unable to get vbus_otg
761[ 7.311097] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
762[ 7.311617] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1b (ok)
763[ 7.312597] SMB358 smb358_get_prop_batt_health: battery health is 1
764[ 7.313880] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32583, 32
765[ 7.316687] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32583, 32
766[ 7.316721] battery powe supply creat attr file!!
767[ 7.322780] smb358_otg_vreg: no parameters
768[ 7.323015] SMB358 smb358_get_prop_batt_health: battery health is 1
769[ 7.324252] of_batterydata_get_best_profile: C3N batt_id = 29
770[ 7.324265] of_batterydata_get_best_profile: wingtech-feimaotui-4v4-3030mah found
771[ 7.324274] smb358-charger 5-0057: found battery type is wingtech-feimaotui-4v4-3030mah
772[ 7.325512] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32582, 32
773[ 7.329340] SMB358 chg_uv: chg_uv pluginupdating usb_psy present=1
774[ 7.329620] qpnp_adc_tm_channel_measure: not a valid ADC_TM channel
775[ 7.329626] SMB358 smb358_charger_probe: requesting ADC error -22
776[ 7.341435] smb358-charger 5-0057: SMB358 successfully probed. charger=1, batt=1
777[ 7.343700] SMB358 get_capacity_disable_charging: else discharg
778[ 7.343732] SMB358 into_fastmmi_mode: has no androidboot.mode
779[ 7.344238] msm_otg 78db000.usb: phy_reset: success
780[ 7.345411] Registered cp15_barrier emulation handler
781[ 7.345423] Registered setend emulation handler
782[ 7.345485] Creating CPU group 0
783[ 7.345491] Init CPU0 state
784[ 7.345495] Init CPU1 state
785[ 7.345498] Init CPU2 state
786[ 7.345502] Init CPU3 state
787[ 7.354595] Key type encrypted registered
788[ 7.354621] AppArmor: AppArmor sha1 policy hashing enabled
789[ 7.354629] evm: HMAC attrs: 0x1
790[ 7.451316] IPA HW is not supported on this target
791[ 7.476676] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
792[ 7.479725] RNDIS_IPA module is loaded.
793[ 7.480576] file system registered
794[ 7.480646] mbim_init: initialize 1 instances
795[ 7.480785] mbim_init: Initialized 1 ports
796[ 7.482686] rndis_qc_init: initialize rndis QC instance
797[ 7.482983] Number of LUNs=8
798[ 7.482992] Mass Storage Function, version: 2009/09/11
799[ 7.483001] LUN: removable file: (no medium)
800[ 7.483016] Number of LUNs=1
801[ 7.483073] LUN: removable file: (no medium)
802[ 7.483078] Number of LUNs=1
803[ 7.483420] android_usb gadget: android_usb ready
804[ 7.483430] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
805[ 7.483447] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
806[ 7.485190] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
807[ 7.485748] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 00:00:11 UTC (11)
808[ 7.485751] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
809[ 7.487254] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32577, 32
810[ 7.487264] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 320 , disabled_delay_times = 3 , enabled_delay_times = 3
811[ 7.487271] SMB358 qpnp_lbc_temp_alarm_work_fn: battery is normal
812[ 7.487658] /soc/i2c@7af5000/cw2015@62: could not get #gpio-cells for /soc/pinctrl@1000000/pmx_qdsd_data2/data2_trace
813[ 7.499032] SMB358 smb358_get_prop_batt_health: battery health is 1
814[ 7.500317] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32582, 32
815[ 7.580172] msm_otg 78db000.usb: Avail curr from USB = 500
816[ 7.581444] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
817[ 7.581459] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
818[ 8.400065] cw201x 5-0062: cw_bat_gpio_configure irq gpio not provided
819[ 8.400072] ------------[ cut here ]------------
820[ 8.400085] WARNING: CPU: 0 PID: 1 at /home/darkness/Documents/halium/kernel/xiaomi/msm8917/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
821[ 8.400090] invalid GPIO -22
822[ 8.400094] Modules linked in:
823[ 8.400103] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.31-TeamGhost-gdf100350-dirty #1
824[ 8.400108] Hardware name: Qualcomm Technologies, Inc. MSM8917-PMI8937 QRD SKU5 (DT)
825[ 8.400112] Call trace:
826[ 8.400121] [<ffffffc000089b08>] dump_backtrace+0x0/0x23c
827[ 8.400127] [<ffffffc000089d58>] show_stack+0x14/0x1c
828[ 8.400135] [<ffffffc000d0ef54>] dump_stack+0x80/0xa4
829[ 8.400144] [<ffffffc0000a2e88>] warn_slowpath_common+0x8c/0xb0
830[ 8.400150] [<ffffffc0000a2f0c>] warn_slowpath_fmt+0x60/0x80
831[ 8.400157] [<ffffffc0003c2910>] gpio_to_desc+0x2c/0x50
832[ 8.400164] [<ffffffc000893ae8>] cw_bat_probe+0x730/0x8b4
833[ 8.400173] [<ffffffc0007a688c>] i2c_device_probe+0xb8/0xec
834[ 8.400180] [<ffffffc0005b2cac>] driver_probe_device+0xd8/0x224
835[ 8.400185] [<ffffffc0005b2ea8>] __driver_attach+0x64/0x90
836[ 8.400191] [<ffffffc0005b1da8>] bus_for_each_dev+0x80/0xb0
837[ 8.400197] [<ffffffc0005b2774>] driver_attach+0x20/0x28
838[ 8.400203] [<ffffffc0005b2414>] bus_add_driver+0xfc/0x1cc
839[ 8.400208] [<ffffffc0005b385c>] driver_register+0x94/0xe0
840[ 8.400216] [<ffffffc0007a5d58>] i2c_register_driver+0x4c/0xac
841[ 8.400224] [<ffffffc00143b464>] cw_bat_init+0x18/0x20
842[ 8.400230] [<ffffffc000082b24>] do_one_initcall+0x18c/0x1a8
843[ 8.400238] [<ffffffc0013fab90>] kernel_init_freeable+0x1d0/0x284
844[ 8.400245] [<ffffffc000d08450>] kernel_init+0x14/0xd8
845[ 8.400249] ---[ end trace 96e925b977bad523 ]---
846[ 8.400255] cw201x 5-0062: request irq failed
847[ 8.400259] ------------[ cut here ]------------
848[ 8.400267] WARNING: CPU: 0 PID: 1 at /home/darkness/Documents/halium/kernel/xiaomi/msm8917/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
849[ 8.400271] invalid GPIO -22
850[ 8.400274] Modules linked in:
851[ 8.400281] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-TeamGhost-gdf100350-dirty #1
852[ 8.400286] Hardware name: Qualcomm Technologies, Inc. MSM8917-PMI8937 QRD SKU5 (DT)
853[ 8.400289] Call trace:
854[ 8.400296] [<ffffffc000089b08>] dump_backtrace+0x0/0x23c
855[ 8.400302] [<ffffffc000089d58>] show_stack+0x14/0x1c
856[ 8.400309] [<ffffffc000d0ef54>] dump_stack+0x80/0xa4
857[ 8.400315] [<ffffffc0000a2e88>] warn_slowpath_common+0x8c/0xb0
858[ 8.400322] [<ffffffc0000a2f0c>] warn_slowpath_fmt+0x60/0x80
859[ 8.400328] [<ffffffc0003c2910>] gpio_to_desc+0x2c/0x50
860[ 8.400335] [<ffffffc0003c4a5c>] gpio_free+0xc/0x18
861[ 8.400341] [<ffffffc000893b30>] cw_bat_probe+0x778/0x8b4
862[ 8.400348] [<ffffffc0007a688c>] i2c_device_probe+0xb8/0xec
863[ 8.400354] [<ffffffc0005b2cac>] driver_probe_device+0xd8/0x224
864[ 8.400359] [<ffffffc0005b2ea8>] __driver_attach+0x64/0x90
865[ 8.400365] [<ffffffc0005b1da8>] bus_for_each_dev+0x80/0xb0
866[ 8.400370] [<ffffffc0005b2774>] driver_attach+0x20/0x28
867[ 8.400376] [<ffffffc0005b2414>] bus_add_driver+0xfc/0x1cc
868[ 8.400381] [<ffffffc0005b385c>] driver_register+0x94/0xe0
869[ 8.400388] [<ffffffc0007a5d58>] i2c_register_driver+0x4c/0xac
870[ 8.400394] [<ffffffc00143b464>] cw_bat_init+0x18/0x20
871[ 8.400400] [<ffffffc000082b24>] do_one_initcall+0x18c/0x1a8
872[ 8.400407] [<ffffffc0013fab90>] kernel_init_freeable+0x1d0/0x284
873[ 8.400413] [<ffffffc000d08450>] kernel_init+0x14/0xd8
874[ 8.400417] ---[ end trace 96e925b977bad524 ]---
875[ 8.512438] parse_cpu_levels: idx 1 594
876[ 8.516078] led_gpio_flash_probe seq_name[0] = flash_en
877[ 8.516088] led_gpio_flash_probe:232 seq_type[0] 0
878[ 8.516093] led_gpio_flash_probe seq_name[1] = flash_now
879[ 8.516098] led_gpio_flash_probe:250 seq_type[1] 1
880[ 8.516194] led_gpio_flash_probe:probe successfully!
881[ 8.522868] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
882[ 8.529598] msm8952-asoc-wcd c051000.sound: default codec configured
883[ 8.533768] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
884[ 8.533802] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
885[ 8.535400] mem_acc_corner: disabling
886[ 8.535418] clock_late_init: Removing enables held for handed-off clocks
887[ 8.537815] ALSA device list:
888[ 8.537820] No soundcards found.
889[ 8.537895] Warning: unable to open an initial console.
890[ 8.538116] Freeing unused kernel memory: 508K (ffffffc0013fa000 - ffffffc001479000)
891[ 8.538151] Freeing alternatives memory: 84K (ffffffc001479000 - ffffffc00148e000)
892[ 8.566231] systemd-udevd[332]: starting version 232
893[ 8.567729] random: systemd-udevd urandom read with 109 bits of entropy available
894[ 8.792626] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:29
895[ 8.792637] SMB358 smb358_get_prop_batt_health: battery health is 1
896[ 8.793931] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32581, 32
897[ 8.793941] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
898[ 8.884145] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:29
899[ 8.884168] SMB358 smb358_get_prop_batt_health: battery health is 1
900[ 8.885508] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32573, 33
901[ 8.885522] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
902[ 9.091276] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:29
903[ 9.091289] SMB358 smb358_get_prop_batt_health: battery health is 1
904[ 9.092610] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32569, 33
905[ 9.092627] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
906[ 9.315221] random: nonblocking pool is initialized
907[ 9.318232] Begin: Running /scripts/nfs-top ... done.
908[ 9.318456] Begin: Running /scripts/nfs-premount ... done.
909[ 9.318679] Begin: Running /scripts/local-top ... done.
910[ 9.318853] Begin: Running /scripts/local-premount ... done.
911[ 9.337424] initrd: checking filesystem integrity for the userdata partition
912[ 9.339856] EXT3-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
913[ 9.340697] EXT2-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (44)
914[ 9.348242] EXT4-fs (mmcblk0p49): recovery complete
915[ 9.348959] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: errors=remount-ro
916[ 9.518421] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
917[ 9.524513] dumpe2fs 1.43.4 (31-Jan-2017)
918[ 9.528667] initrd: mounting /dev/mmcblk0p49
919[ 9.545402] EXT3-fs (mmcblk0p49): error: unrecognized mount option "discard" or missing value
920[ 9.546399] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
921[ 9.548135] EXT4-fs (mmcblk0p49): mounted filesystem with journalled data mode. Opts: discard,data=journal
922[ 9.552021] initrd: boot mode: halium
923[ 9.552592] initrd: Halium rootfs is /tmpmnt/rootfs.img
924[ 9.553177] initrd: mounting system rootfs at /halium-system
925[ 9.556399] EXT3-fs (loop0): error: couldn't mount because of unsupported optional features (240)
926[ 9.556912] EXT2-fs (loop0): error: couldn't mount because of unsupported optional features (240)
927[ 9.563314] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
928[ 9.581359] initrd: mounting /tmpmnt/rootfs.img (user mode)
929[ 9.584861] EXT4-fs (loop0): re-mounted. Opts: data=ordered
930[ 9.586263] initrd: mounting android system image (/tmpmnt/system.img) ro, in /android-system (system mode)
931[ 9.586329] initrd: mounting android system image from userdata partition
932[ 9.589466] EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (40)
933[ 9.589964] EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (40)
934[ 9.595425] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
935[ 9.595890] initrd: extracting android ramdisk
936[ 9.764426] 8163 blocks
937[ 9.765519] initrd: Normal boot
938[ 9.785903] initrd: device is rolex
939[ 9.789240] initrd: Adding bind-mounts to /root/etc/fstab
940[ 9.902779] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
941[ 9.924662] initrd: checking mount label boot
942[ 9.925402] initrd: mounting /dev/disk/by-partlabel/boot as /root/android//boot
943[ 9.928363] mount: mounting /dev/disk/by-partlabel/boot on /root/android//boot failed: No such device
944[ 9.933937] initrd: checking mount label recovery
945[ 9.934654] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
946[ 9.937616] mount: mounting /dev/disk/by-partlabel/recovery on /root/android//recovery failed: No such device
947[ 9.950965] initrd: checking mount label cache
948[ 9.951680] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
949[ 9.954398] EXT4-fs (mmcblk0p25): recovery complete
950[ 9.954413] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
951[ 9.959972] initrd: checking mount label persist
952[ 9.960794] initrd: mounting /dev/disk/by-partlabel/persist as /root/android//persist
953[ 9.965907] EXT4-fs (mmcblk0p26): warning: maximal mount count reached, running e2fsck is recommended
954[ 9.966182] EXT4-fs (mmcblk0p26): recovery complete
955[ 9.966194] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
956[ 9.971767] initrd: checking mount label dsp
957[ 9.972491] initrd: mounting /dev/disk/by-partlabel/dsp as /root/android//dsp
958[ 9.977550] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
959[ 9.983189] initrd: checking mount label modem
960[ 9.983898] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//firmware
961[ 9.999029] initrd: checking mount label mmc_host*
962[ 10.004777] initrd: checking mount label msm_hsusb_host*
963[ 10.006092] initrd: moving Android system to /android/system
964[ 10.016564] mount: mounting /root/android/system/lib/modules on /root/lib/modules failed: No such file or directory
965[ 10.018366] Begin: Running /scripts/local-bottom ... done.
966[ 10.018557] done.
967[ 10.024523] Begin: Running /scripts/nfs-bottom ... done.
968[ 10.024832] Begin: Running /scripts/init-bottom ... done.
969[ 10.065862] run-init: opening console: No such device
970[ 10.066009] Target filesystem doesn't have requested /sbin/init.
971[ 10.066740] run-init: opening console: No such device
972[ 10.067560] run-init: opening console: No such device
973[ 10.068375] run-init: opening console: No such device
974[ 10.069198] run-init: opening console: No such device
975[ 10.070204] run-init: opening console: No such device
976[ 10.071522] No init found. Try passing init= bootarg.
977[ 10.074668] enable_store: android_usb: already disabled
978[ 10.074839] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
979[ 10.215397] msm_otg 78db000.usb: Avail curr from USB = 100
980[ 10.215566] android_work: android_work: did not send uevent (0 0 0000000000000000)
981[ 10.221179] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
982[ 10.341859] composite_setup:config is not active. send stall
983[ 10.341923] android_work: android_work: sent uevent USB_STATE=CONNECTED
984[ 10.342269] composite_setup:config is not active. send stall
985[ 10.342643] composite_setup:config is not active. send stall
986[ 10.346346] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
987[ 10.352622] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
988[ 10.576099] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
989[ 10.576142] android_usb gadget: using random self ethernet address
990[ 10.576159] android_usb gadget: using random host ethernet address
991[ 10.576658] rndis0: MAC ba:ae:41:ad:80:56
992[ 10.576663] rndis0: HOST MAC da:6a:81:80:04:80
993[ 10.610060] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
994[ 10.611194] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
995[ 10.611841] android_work: android_work: did not send uevent (0 0 0000000000000000)
996[ 10.613848] ########################## starting dhcpd
997[ 10.615161] ########################## starting telnetd
998[ 10.616257] ########################## usb_info: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
999[ 10.617585] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1000[ 11.352805] msm_otg 78db000.usb: Avail curr from USB = 2
1001[ 11.352822] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1002[ 11.352843] android_work: android_work: did not send uevent (0 0 0000000000000000)
1003[ 11.358768] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1004[ 11.366542] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1005[ 11.618252] ps: invalid option -- 'w'
1006[ 11.623996] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1007[ 11.624012]
1008[ 11.624012] Usage: ps [-o COL1,COL2=HEADER] [-T]
1009[ 11.624012]
1010[ 11.624012] Show list of processes
1011[ 11.624012]
1012[ 11.624012] -o COL1,COL2=HEADER Select columns for display
1013[ 11.624012] -T Show threads
1014[ 11.624012]
1015[ 11.648308] netstat: invalid option -- 'p'
1016[ 11.654305] BusyBox v1.22.1 (Debian 1:1.22.0-19+b3) multi-call binary.
1017[ 11.654322]
1018[ 11.654322] Usage: netstat [-ral] [-tuwx] [-en]
1019[ 11.654322]
1020[ 11.654322] Display networking information
1021[ 11.654322]
1022[ 11.654322] -r Routing table
1023[ 11.654322] -a All sockets
1024[ 11.654322] -l Listening sockets
1025[ 11.654322] Else: connected sockets
1026[ 11.654322] -t TCP sockets
1027[ 11.654322] -u UDP sockets
1028[ 11.654322] -w Raw sockets
1029[ 11.654322] -x Unix sockets
1030[ 11.654322] Else: all socket types
1031[ 11.654322] -e Other/more information
1032[ 11.654322] -n Don't resolve names
1033[ 11.654322]
1034[ 11.655246] cat: write error: Invalid argument
1035[ 11.664865] ########################## Beginning inject loop
1036[ 11.711265] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1037[ 11.711294] msm_otg 78db000.usb: Avail curr from USB = 100
1038[ 11.711335] android_work: android_work: did not send uevent (0 0 0000000000000000)
1039[ 11.717292] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1040[ 11.725088] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1041[ 11.812400] SMB358 smb358_get_prop_batt_capacity: CW2015_BATTERY_CAPACITY IS:29
1042[ 11.812409] SMB358 smb358_get_prop_batt_health: battery health is 1
1043[ 11.813699] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32579, 32
1044[ 11.813708] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1045[ 11.838054] android_work: android_work: sent uevent USB_STATE=CONNECTED
1046[ 11.842595] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1047[ 11.848357] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1048[ 11.990053] android_work: android_work: sent uevent USB_STATE=CONNECTED
1049[ 12.027990] android_usb gadget: full-speed config #1: 86000c8.android_usb
1050[ 12.028050] msm_otg 78db000.usb: Avail curr from USB = 500
1051[ 12.028099] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1052[ 12.034402] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1053[ 12.035216] rndis_command_complete: rndis_command_complete: MaxTransferSize: 1600 : Multi_pkt_txr: disabled
1054[ 12.080060] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1055[ 17.498124] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1056[ 17.499676] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32576, 32
1057[ 17.499683] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 320 , disabled_delay_times = 0 , enabled_delay_times = 0
1058[ 17.504883] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3777000
1059[ 27.499699] SMB358 batt_temp_alarm_callback: wgz batt_temp_alarm_callback:684
1060[ 27.501397] SMB358 smb358_get_prop_batt_temp: get_bat_temp 32579, 32
1061[ 27.501405] SMB358 qpnp_lbc_temp_alarm_work_fn: wgz temp = 320 , disabled_delay_times = 0 , enabled_delay_times = 0
1062[ 27.505750] SMB358 smb358_get_prop_battery_voltage_now: POWER_SUPPLY_PROP_VOLTAGE_NOW IS:3782000
1063[ 27.967921] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.