· 6 years ago · Jan 27, 2020, 10:12 AM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
2[ 0.000000] Linux version 5.5.0-0.rc6.git3.1.fc32.aarch64 (mockbuild@buildvm-aarch64-07.arm.fedoraproject.org) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Fri Jan 17 18:30:47 UTC 2020
3[ 0.000000] Machine model: Khadas VIM3
4[ 0.000000] efi: Getting EFI parameters from FDT:
5[ 0.000000] efi: EFI v2.80 by Das U-Boot
6[ 0.000000] efi: SMBIOS=0xf1f34000 MEMRESERVE=0xf1ca9040
7[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e1000000, size 256 MiB
8[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
9[ 0.000000] NUMA: No NUMA configuration found
10[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f4ffffff]
11[ 0.000000] NUMA: NODE_DATA [mem 0xf4799d00-0xf47abfff]
12[ 0.000000] Zone ranges:
13[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
14[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000f4ffffff]
15[ 0.000000] Normal empty
16[ 0.000000] Movable zone start for each node
17[ 0.000000] Early memory node ranges
18[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
19[ 0.000000] node 0: [mem 0x0000000005300000-0x00000000f1f2dfff]
20[ 0.000000] node 0: [mem 0x00000000f1f2e000-0x00000000f1f32fff]
21[ 0.000000] node 0: [mem 0x00000000f1f33000-0x00000000f1f33fff]
22[ 0.000000] node 0: [mem 0x00000000f1f34000-0x00000000f1f34fff]
23[ 0.000000] node 0: [mem 0x00000000f1f35000-0x00000000f1f36fff]
24[ 0.000000] node 0: [mem 0x00000000f1f37000-0x00000000f1f3dfff]
25[ 0.000000] node 0: [mem 0x00000000f1f3e000-0x00000000f1f3ffff]
26[ 0.000000] node 0: [mem 0x00000000f1f40000-0x00000000f1f43fff]
27[ 0.000000] node 0: [mem 0x00000000f1f44000-0x00000000f4f4ffff]
28[ 0.000000] node 0: [mem 0x00000000f4f50000-0x00000000f4f5ffff]
29[ 0.000000] node 0: [mem 0x00000000f4f60000-0x00000000f4ffffff]
30[ 0.000000] Zeroed struct page in unavailable ranges: 33 pages
31[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4ffffff]
32[ 0.000000] psci: probing for conduit method from DT.
33[ 0.000000] psci: PSCIv1.0 detected in firmware.
34[ 0.000000] psci: Using standard PSCI v0.2 function IDs
35[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
36[ 0.000000] psci: SMC Calling Convention v1.1
37[ 0.000000] percpu: Embedded 32 pages/cpu s90632 r8192 d32248 u131072
38[ 0.000000] Detected VIPT I-cache on CPU0
39[ 0.000000] CPU features: detected: ARM erratum 845719
40[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 987072
41[ 0.000000] Policy zone: DMA32
42[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.5.0-0.rc6.git3.1.fc32.aarch64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root clk_ignore_unused
43[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
44[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
45[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
46[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
47[ 0.000000] Memory: 3513540K/4011008K available (12924K kernel code, 5450K rwdata, 6268K rodata, 6272K init, 26849K bss, 235324K reserved, 262144K cma-reserved)
48[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x30/0x4c8 with crng_init=0
49[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
50[ 0.000000] kmemleak: Kernel memory leak detector disabled
51[ 0.000000] ftrace: allocating 43614 entries in 171 pages
52[ 0.000000] ftrace: allocated 171 pages with 5 groups
53[ 0.000000] Running RCU self tests
54[ 0.000000] rcu: Hierarchical RCU implementation.
55[ 0.000000] rcu: RCU lockdep checking is enabled.
56[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=6.
57[ 0.000000] rcu: RCU callback double-/use-after-free debug enabled.
58[ 0.000000] Tasks RCU enabled.
59[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
60[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
61[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
62[ 0.000000] GIC: Using split EOI/Deactivate mode
63[ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
64[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
65[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
66[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
67[ 0.000518] Console: colour dummy device 80x25
68[ 0.003824] printk: console [tty0] enabled
69[ 0.003951] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
70[ 0.004022] ... MAX_LOCKDEP_SUBCLASSES: 8
71[ 0.004066] ... MAX_LOCK_DEPTH: 48
72[ 0.004111] ... MAX_LOCKDEP_KEYS: 8192
73[ 0.004156] ... CLASSHASH_SIZE: 4096
74[ 0.004202] ... MAX_LOCKDEP_ENTRIES: 32768
75[ 0.004248] ... MAX_LOCKDEP_CHAINS: 65536
76[ 0.004293] ... CHAINHASH_SIZE: 32768
77[ 0.004340] memory used by lock dependency info: 6237 kB
78[ 0.004392] memory used for stack traces: 4224 kB
79[ 0.004440] per task-struct memory footprint: 1920 bytes
80[ 0.004742] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
81[ 0.004839] pid_max: default: 32768 minimum: 301
82[ 0.005208] LSM: Security Framework initializing
83[ 0.005337] Yama: becoming mindful.
84[ 0.005435] SELinux: Initializing.
85[ 0.005683] *** VALIDATE SELinux ***
86[ 0.005977] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
87[ 0.006070] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
88[ 0.006297] *** VALIDATE tmpfs ***
89[ 0.007823] *** VALIDATE proc ***
90[ 0.008661] *** VALIDATE cgroup1 ***
91[ 0.008721] *** VALIDATE cgroup2 ***
92[ 0.013210] ASID allocator initialised with 32768 entries
93[ 0.013759] rcu: Hierarchical SRCU implementation.
94[ 0.019086] Remapping and enabling EFI services.
95[ 0.021514] smp: Bringing up secondary CPUs ...
96[ 0.024186] Detected VIPT I-cache on CPU1
97[ 0.024260] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
98[ 0.027536] CPU features: detected: ARM erratum 858921
99[ 0.027547] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
100[ 0.027556] Detected VIPT I-cache on CPU2
101[ 0.027584] arch_timer: Enabling local workaround for ARM erratum 858921
102[ 0.027607] arch_timer: CPU2: Trapping CNTVCT access
103[ 0.027619] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
104[ 0.030340] Detected VIPT I-cache on CPU3
105[ 0.030359] arch_timer: Enabling local workaround for ARM erratum 858921
106[ 0.030371] arch_timer: CPU3: Trapping CNTVCT access
107[ 0.030379] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
108[ 0.032708] Detected VIPT I-cache on CPU4
109[ 0.032726] arch_timer: Enabling local workaround for ARM erratum 858921
110[ 0.032738] arch_timer: CPU4: Trapping CNTVCT access
111[ 0.032746] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
112[ 0.035232] Detected VIPT I-cache on CPU5
113[ 0.035250] arch_timer: Enabling local workaround for ARM erratum 858921
114[ 0.035262] arch_timer: CPU5: Trapping CNTVCT access
115[ 0.035270] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
116[ 0.035598] smp: Brought up 1 node, 6 CPUs
117[ 0.036665] SMP: Total of 6 processors activated.
118[ 0.036723] CPU features: detected: 32-bit EL0 Support
119[ 0.036783] CPU features: detected: CRC32 instructions
120[ 0.067270] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
121[ 0.067374] CPU: All CPU(s) started at EL2
122[ 0.067627] alternatives: patching kernel code
123[ 0.072382] devtmpfs: initialized
124[ 0.101930] Registered cp15_barrier emulation handler
125[ 0.101992] Registered setend emulation handler
126[ 0.102037] KASLR disabled due to lack of seed
127[ 0.115117] DMA-API: preallocated 65536 debug entries
128[ 0.115167] DMA-API: debugging enabled by kernel config
129[ 0.115209] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
130[ 0.115294] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
131[ 0.201633] pinctrl core: initialized pinctrl subsystem
132[ 0.203395]
133[ 0.203419] *************************************************************
134[ 0.203461] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
135[ 0.203504] ** **
136[ 0.203545] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
137[ 0.203586] ** **
138[ 0.203628] ** This means that this kernel is built to expose internal **
139[ 0.203669] ** IOMMU data structures, which may compromise security on **
140[ 0.203710] ** your system. **
141[ 0.203752] ** **
142[ 0.203793] ** If you see this message and you are not debugging the **
143[ 0.203834] ** kernel, report this immediately to your vendor! **
144[ 0.203875] ** **
145[ 0.203916] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
146[ 0.203957] *************************************************************
147[ 0.204507] thermal_sys: Registered thermal governor 'fair_share'
148[ 0.204512] thermal_sys: Registered thermal governor 'step_wise'
149[ 0.204556] thermal_sys: Registered thermal governor 'user_space'
150[ 0.205833] SMBIOS 3.0 present.
151[ 0.205904] DMI: amlogic w400/w400, BIOS 2020.01-rc4-00038-g94d022bb40-dirty 12/15/2019
152[ 0.207122] NET: Registered protocol family 16
153[ 0.228454] DMA: preallocated 256 KiB pool for atomic allocations
154[ 0.228535] audit: initializing netlink subsys (disabled)
155[ 0.229071] audit: type=2000 audit(0.220:1): state=initialized audit_enabled=0 res=1
156[ 0.231534] cpuidle: using governor menu
157[ 0.231915] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
158[ 0.233121] Serial: AMBA PL011 UART driver
159[ 0.291726] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
160[ 0.291784] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
161[ 0.291828] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
162[ 0.291872] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
163[ 0.754594] cryptomgr_test (53) used greatest stack depth: 13216 bytes left
164[ 0.755372] kworker/u12:0 (55) used greatest stack depth: 12400 bytes left
165[ 0.905298] cryptd: max_cpu_qlen set to 1000
166[ 0.931007] alg: No test for 842 (842-generic)
167[ 0.931549] alg: No test for 842 (842-scomp)
168[ 0.958504] fbcon: Taking over console
169[ 0.958711] ACPI: Interpreter disabled.
170[ 0.963083] VSYS_3V3: supplied by DC_IN
171[ 0.964687] iommu: Default domain type: Translated
172[ 0.965625] vgaarb: loaded
173[ 0.966969] SCSI subsystem initialized
174[ 0.967916] usbcore: registered new interface driver usbfs
175[ 0.968061] usbcore: registered new interface driver hub
176[ 0.968280] usbcore: registered new device driver usb
177[ 0.968932] pps_core: LinuxPPS API ver. 1 registered
178[ 0.968969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
179[ 0.969047] PTP clock support registered
180[ 0.969534] EDAC MC: Ver: 3.0.0
181[ 0.970866] Registered efivars operations
182[ 0.973093] NetLabel: Initializing
183[ 0.973126] NetLabel: domain hash size = 128
184[ 0.973158] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
185[ 0.973348] NetLabel: unlabeled traffic allowed by default
186[ 0.974626] clocksource: Switched to clocksource arch_sys_counter
187[ 1.209978] *** VALIDATE bpf ***
188[ 1.211285] VFS: Disk quotas dquot_6.6.0
189[ 1.211431] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
190[ 1.211704] *** VALIDATE ramfs ***
191[ 1.211762] *** VALIDATE hugetlbfs ***
192[ 1.212720] pnp: PnP ACPI: disabled
193[ 1.230100] NET: Registered protocol family 2
194[ 1.232003] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 147456 bytes, linear)
195[ 1.232242] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
196[ 1.232446] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes, linear)
197[ 1.234971] TCP: Hash tables configured (established 32768 bind 32768)
198[ 1.235585] UDP hash table entries: 2048 (order: 6, 327680 bytes, linear)
199[ 1.236082] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes, linear)
200[ 1.236865] NET: Registered protocol family 1
201[ 1.236949] NET: Registered protocol family 44
202[ 1.236993] PCI: CLS 0 bytes, default 64
203[ 1.237673] Trying to unpack rootfs image as initramfs...
204[ 2.900633] Freeing initrd memory: 30364K
205[ 2.902650] kvm [1]: IPA Size Limit: 40bits
206[ 2.911475] kvm [1]: vgic interrupt IRQ1
207[ 2.911864] kvm [1]: Hyp mode initialized successfully
208[ 3.721403] Initialise system trusted keyrings
209[ 3.721715] Key type blacklist registered
210[ 3.722099] workingset: timestamp_bits=37 max_order=20 bucket_order=0
211[ 3.741884] zbud: loaded
212[ 3.769217] NET: Registered protocol family 38
213[ 3.769373] Key type asymmetric registered
214[ 3.769448] Asymmetric key parser 'x509' registered
215[ 3.769572] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
216[ 3.770092] io scheduler mq-deadline registered
217[ 3.770132] io scheduler kyber registered
218[ 3.770235] io scheduler bfq registered
219[ 3.773083] atomic64_test: passed
220[ 3.791419] dw-pcie fc000000.pcie: IRQ index 1 not found
221[ 3.817671] soc soc0: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Detected
222[ 3.822197] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
223[ 3.822406] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
224[ 3.824393] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
225[ 3.847834] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
226[ 5.089456] printk: console [ttyAML0] enabled
227[ 5.095159] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 19, base_baud = 1500000) is a meson_uart
228[ 5.103329] serial serial0: tty port ttyAML6 registered
229[ 5.108676] msm_serial: driver initialized
230[ 5.122137] libphy: Fixed MDIO Bus: probed
231[ 5.123122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
232[ 5.127179] ehci-pci: EHCI PCI platform driver
233[ 5.131810] usbcore: registered new interface driver usbserial_generic
234[ 5.138127] usbserial: USB Serial support registered for generic
235[ 5.144385] mousedev: PS/2 mouse device common for all mice
236[ 5.154741] device-mapper: uevent: version 1.0.3
237[ 5.155544] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
238[ 5.164590] ledtrig-cpu: registered to indicate activity on CPUs
239[ 5.169436] meson-sm: secure-monitor enabled
240[ 5.172827] EFI Variables Facility v0.08 2004-May-17
241[ 5.177681] efivars: get_next_variable: status=8000000000000003
242[ 5.184751] hid: raw HID events driver (C) Jiri Kosina
243[ 5.188772] usbcore: registered new interface driver usbhid
244[ 5.193947] usbhid: USB HID core driver
245[ 5.200394] drop_monitor: Initializing network drop monitor service
246[ 5.204282] Initializing XFRM netlink socket
247[ 5.209625] NET: Registered protocol family 10
248[ 5.275150] Segment Routing with IPv6
249[ 5.275292] mip6: Mobile IPv6
250[ 5.276148] NET: Registered protocol family 17
251[ 5.281908] registered taskstats version 1
252[ 5.284740] Loading compiled-in X.509 certificates
253[ 5.441851] Loaded X.509 cert 'Fedora kernel signing key: add82d092660c7b65b799210563a0a36a0f08210'
254[ 5.446046] zswap: loaded using pool lzo/zbud
255[ 5.450825] Key type ._fscrypt registered
256[ 5.453539] Key type .fscrypt registered
257[ 5.490908] Key type big_key registered
258[ 5.521072] Key type encrypted registered
259[ 5.521331] ima: No TPM chip found, activating TPM-bypass!
260[ 5.525031] ima: Allocated hash algorithm: sha256
261[ 5.529669] ima: No architecture policies found
262[ 5.605938] VCC_5V: supplied by DC_IN
263[ 5.606700] VCC_3V3: supplied by VSYS_3V3
264[ 5.608163] VCC_1V8: supplied by VCC_3V3
265[ 5.612021] VDDIO_AO1V8: supplied by VSYS_3V3
266[ 5.616445] EMMC_AO1V8: supplied by VCC_3V3
267[ 5.621010] USB_PWR: supplied by VCC_5V
268[ 5.627458] dw-pcie fc000000.pcie: IRQ index 1 not found
269[ 5.633726] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
270[ 5.636727] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
271[ 5.643726] dw-pcie fc000000.pcie: IRQ index 1 not found
272[ 5.650289] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
273[ 5.654735] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
274[ 5.661781] dw-pcie fc000000.pcie: IRQ index 1 not found
275[ 5.668300] hctosys: unable to open rtc device (rtc0)
276[ 5.670701] clk: Not disabling unused clocks
277[ 5.699781] Freeing unused kernel memory: 6272K
278[ 5.745277] Checked W+X mappings: passed, no W+X pages found
279[ 5.745357] rodata_test: all tests were successful
280[ 5.750084] Run /init as init process
281[ 5.794289] systemd[1]: System time before build time, advancing clock.
282[ 5.870034] efivars: get_next_variable: status=8000000000000003
283[ 5.885833] systemd[1]: systemd v244.1-2.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
284[ 5.905237] systemd[1]: Detected architecture arm64.
285[ 5.907297] systemd[1]: Running in initial RAM disk.
286
287Welcome to Fedora 32 (Server Edition) dracut-049-27.git20181204.fc31.1 (Initramfs)!
288
289[ 5.944984] systemd[1]: Set hostname to <localhost.localdomain>.
290[ 5.956211] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
291[ 6.356449] random: systemd: uninitialized urandom read (16 bytes read)
292[ 6.357552] systemd[1]: Reached target Local File Systems.
293[ OK ] Reached target Local File Systems.
294[ 6.396853] random: systemd: uninitialized urandom read (16 bytes read)
295[ 6.397941] systemd[1]: Reached target Slices.
296[ OK ] Reached target Slices.
297[ 6.434886] random: systemd: uninitialized urandom read (16 bytes read)
298[ 6.435962] systemd[1]: Reached target Swap.
299[ OK ] Reached target Swap.
300[ 6.474944] systemd[1]: Reached target Timers.
301[ OK ] Reached target Timers.
302[ 6.506183] systemd[1]: Listening on Journal Audit Socket.
303[ OK ] Listening on Journal Audit Socket.
304[ 6.535949] systemd[1]: Listening on Journal Socket (/dev/log).
305[ OK ] Listening on Journal Socket (/dev/log).
306[ 6.576118] systemd[1]: Listening on Journal Socket.
307[ OK ] Listening on Journal Socket.
308[ 6.606002] systemd[1]: Listening on udev Control Socket.
309[ OK ] Listening on udev Control Socket.
310[ 6.635546] systemd[1]: Listening on udev Kernel Socket.
311[ OK ] Listening on udev Kernel Socket.
312[ 6.664930] systemd[1]: Reached target Sockets.
313[ OK ] Reached target Sockets.
314[ 6.712147] systemd[1]: Starting Create list of static device nodes for the current kernel...
315 Starting Create list of st…odes for the current kernel...
316[ 6.758599] systemd[1]: Starting Journal Service...
317 Starting Journal Service...
318[ 6.814170] systemd[1]: Starting Load Kernel Modules...
319 Starting Load Kernel Modules...
320[ 6.869160] systemd[1]: Starting Setup Virtual Console...
321 Starting Setup Virtual Console...
322[ 6.882061] fuse: init (API version 7.31)
323[ 6.882485] *** VALIDATE fuse ***
324[ 6.883753] *** VALIDATE fuse ***
325[ 6.893891] Asymmetric key parser 'pkcs8' registered
326[ 6.928224] systemd[1]: Started Create list of static device nodes for the current kernel.
327[ OK ] Started Create list of sta… nodes for the current kernel.
328[ 6.987933] systemd[1]: Started Load Kernel Modules.
329[ OK ] Started Load Kernel Modules.
330[ 7.030559] systemd[1]: Starting Apply Kernel Variables...
331 Starting Apply Kernel Variables...
332[ 7.077868] systemd-sysctl (383) used greatest stack depth: 12288 bytes left
333[ 7.078496] systemd[1]: Starting Create Static Device Nodes in /dev...
334 Starting Create Static Device Nodes in /dev...
335[ 7.133127] systemd[1]: Started Apply Kernel Variables.
336[ OK ] Started Apply Kernel Variables.
337[ 7.178576] systemd[1]: Started Create Static Device Nodes in /dev.
338[ OK ] Started Create Static Device Nodes in /dev.
339[ 7.233551] systemd[1]: systemd-vconsole-setup.service: Succeeded.
340[ 7.238038] systemd[1]: Started Setup Virtual Console.
341[ OK ] Started Setup Virtual Console.
342[ 7.287226] systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped.
343[ 7.300406] systemd[1]: Starting dracut cmdline hook...
344 Starting dracut cmdline hook...
345[ 7.401493] systemd[1]: Started Journal Service.
346[ OK ] Started Journal Service.
347[ 7.446099] audit: type=1130 audit(1576406829.650:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
348 Starting Create Volatile Files and Directories...
349[ OK ] Started Create Volatile Files and Directories.
350[ 7.585255] audit: type=1130 audit(1576406829.790:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
351[ OK ] Started dracut cmdline hook.
352[ 7.825020] audit: type=1130 audit(1576406830.030:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
353 Starting dracut pre-udev hook...
354[ OK ] Started dracut pre-udev hook.
355[ 8.025056] audit: type=1130 audit(1576406830.230:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
356 Starting udev Kernel Device Manager...
357[ OK ] Started udev Kernel Device Manager.
358[ 8.685169] audit: type=1130 audit(1576406830.890:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
359 Starting udev Coldplug all Devices...
360 Mounting Kernel Configuration File System...
361[ OK ] Mounted Kernel Configuration File System.
362[ 9.619752] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
363[ 9.634155] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
364[ 9.636908] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
365[ 9.644689] dw-pcie fc000000.pcie: IRQ index 1 not found
366[ OK ] Started udev Coldplug all Devices.
367[ 9.705124] audit: type=1130 audit(1576406831.910:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
368[ 9.730855] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
369[ 9.732803] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
370[ 9.742527] dw-pcie fc000000.pcie: IRQ index 1 not found
371[ 9.748076] meson-pcie fc000000.pcie: host bridge /soc/pcie@fc000000 ranges:
372[ 9.750395] meson-pcie fc000000.pcie: IO 0x00fc600000..0x00fc6fffff -> 0x0000000000
373[ 9.759167] meson-pcie fc000000.pcie: MEM 0x00fc700000..0x00fdffffff -> 0x00fc700000
374[ 9.790075] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
375[ 9.791091] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
376[ 9.791406] meson-pcie fc000000.pcie: Link up
377[ 9.800094] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
378[ 9.802351] meson-pcie fc000000.pcie: PCI host bridge to bus 0000:00
379[ 9.807579] meson8b-dwmac ff3f0000.ethernet: no reset control found
380[ 9.813781] pci_bus 0000:00: root bus resource [bus 00-ff]
381[ 9.814241] meson-vrtc ff8000a8.rtc: registered as rtc0
382[ 9.817618] meson-gx-mmc ffe05000.sd: Got CD GPIO
383[ 9.830312] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
384[ 9.830591] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
385[ 9.835347] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
386[ 9.842330] pci_bus 0000:00: root bus resource [mem 0xfc700000-0xfdffffff]
387[ 9.848580] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
388[ 9.853982] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
389[ 9.860663] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
390[ 9.868271] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
391[ 9.873884] meson8b-dwmac ff3f0000.ethernet: COE Type 2
392[ 9.881712] pci 0000:00:00.0: supports D1
393[ 9.887975] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
394[ 9.887983] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
395[ 9.888766] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
396[ 9.890053] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
397[ 9.890067] dwc3-meson-g12a ffe09000.usb: USB3 ports: 0
398[ 9.893115] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
399[ 9.897163] meson8b-dwmac ff3f0000.ethernet: Chain mode enabled
400[ 9.909454] pci 0000:01:00.0: [8086:f1a8] type 00 class 0x010802
401[ 9.910577] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
402[ 9.916508] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
403[ 9.921492] meson8b-dwmac ff3f0000.ethernet: device MAC address 1e:4f:83:06:c0:c5
404[ 9.926906] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
405[ 9.933742] libphy: stmmac: probed
406[ 9.938887] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
407[ [ 9.986713] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
408 OK ] Reached target System Initialization.
409[ 10.028421] rtc-hym8563 0-0051: no valid clock/calendar values available
410[ 10.028466] pci 0000:00:00.0: BAR 14: assigned [mem 0xfc700000-0xfc7fffff]
411[ 10.030265] rtc-hym8563 0-0051: registered as rtc1
412[ 10.036459] pci 0000:00:00.0: BAR 6: assigned [mem 0xfc800000-0xfc80ffff pref]
413[ 10.036489] pci 0000:01:00.0: BAR 0: assigned [mem 0xfc700000-0xfc703fff 64bit]
414[ 10.036551] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
415[ 10.036569] pci 0000:00:00.0: bridge window [mem 0xfc700000-0xfc7fffff]
416[ 10.038629] pcieport 0000:00:00.0: PME: Signaling with IRQ 30
417[ 10.064833] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
418[ 10.079507] pcieport 0000:00:00.0: AER: enabled with IRQ 30
419[ 10.087741] pwm-regulator: supplied by regulator-dummy
420[ 10.090923] pwm-regulator: supplied by regulator-dummy
421 Starting dracut initque[ 10.099917] libphy: mdio_mux: probed
422ue hook...
423[ 10.107417] dwc2 ff400000.usb: ff400000.usb supply vusb_d not found, using dummy regulator
424[ 10.111711] dwc2 ff400000.usb: ff400000.usb supply vusb_a not found, using dummy regulator
425[ 10.121066] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
426[ 10.122804] libphy: mdio_mux: probed
427[ 10.128614] nvme nvme0: pci function 0000:01:00.0
428[ 10.136274] nvme 0000:01:00.0: enabling device (0000 -> 0002)
429[ 10.144704] mmc0: new high speed SDHC card at address 5048
430[ 10.159763] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
431 Starting Show Plymouth Boot Screen...
432[ 10.198030] dwc3 ff500000.usb: Failed to get clk 'ref': -2
433[ 10.217530] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
434[ 10.219225] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
435[ 10.225691] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe64 hci version 0x110 quirks 0x0000000000010010
436[ 10.234447] xhci-hcd xhci-hcd.0.auto: irq 28, io mem 0xff500000
437[ 10.234674] mmc1: new HS200 MMC card at address 0001
438[ 10.242321] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
439[ 10.249403] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
440[ 10.253348] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
441[ 10.256123] mmcblk0: mmc0:5048 SDCHE 29.2 GiB
442[ 10.268094] random: fast init done
443[ 10.270294] usb usb1: Product: xHCI Host Controller
444[ 10.276828] mmcblk0: p1 p2 p3
445[ 10.278581] usb usb1: Manufacturer: Linux 5.5.0-0.rc6.git3.1.fc32.aarch64 xhci-hcd
446[ 10.278589] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
447[ 10.283681] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
448[ 10.289064] usb usb1: SerialNumber: xhci-hcd.0.auto
449[ 10.298041] hub 1-0:1.0: USB hub found
450[ 10.298860] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB
451[ 10.299548] mmcblk1boot0: mmc1:0001 BJTD4R partition 1 4.00 MiB
452[ 10.300215] mmcblk1boot1: mmc1:0001 BJTD4R partition 2 4.00 MiB
453[ 10.304325] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
454[ 10.306657] hub 1-0:1.0: 2 ports detected
455[ 10.309088] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
456[ 10.309765] mmcblk1rpmb: mmc1:0001 BJTD4R partition 3 4.00 MiB, chardev (511:0)
457[ 10.312899] mmcblk1: p1
458[ 10.320422] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
459[ 10.356155] audit: type=1130 audit(1576406832.560:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
460[ 10.356415] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
461[ OK ] Started 10.382518] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
462[ 10.383400] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
463[ 10.383823] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
464[ 10.383833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
465[ 10.383840] usb usb2: Product: xHCI Host Controller
466[ 10.383847] usb usb2: Manufacturer: Linux 5.5.0-0.rc6.git3.1.fc32.aarch64 xhci-hcd
467[ 10.383853] usb usb2: SerialNumber: xhci-hcd.0.auto
468[ 10.386864] hub 2-0:1.0: USB hub found
4691;39mShow Plym[ 10.438057] hub 2-0:1.0: 1 port detected
470[ 10.440434] mmc2: new ultra high speed SDR50 SDIO card at address 0001
471outh Boot Screen.
472[ OK ] Started Forward Password R…s to Plymouth Directory Watch.
473[ OK ] Reached target Paths.
474[ OK ] Reached target Basic System.
475[ 10.476732] nvme nvme0: 6/0/0 default/read/poll queues
476[ 10.502145] nvme0n1: p1
477[ 10.694713] usb 1-1: new high-speed USB device number 2 using xhci-hcd
478[ 10.726506] usb 1-1: New USB device found, idVendor=1a40, idProduct=0801, bcdDevice= 1.00
479[ 10.729123] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
480[ 10.736290] usb 1-1: Product: USB 2.0 Hub
481[ 10.800531] hub 1-1:1.0: USB hub found
482[ 10.800825] hub 1-1:1.0: 4 ports detected
483[ 11.067182] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet]
484[ 11.071208]
485[ 11.071911] =====================================================
486[ 11.077949] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
487[ 11.084507] 5.5.0-0.rc6.git3.1.fc32.aarch64 #1 Not tainted
488[ 11.089937] -----------------------------------------------------
489[ 11.095977] NetworkManager/578 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
490[ 11.102963] ffff0000f3167150 (&(&ctl->lock)->rlock){+.+.}, at: meson_gpio_irq_set_type+0x88/0x15c
491[ 11.111762]
492[ 11.111762] and this task is already holding:
493[ 11.117538] ffff0000b273bcc0 (&irq_desc_lock_class){-.-.}, at: __setup_irq+0xdc/0x8b8
494[ 11.125303] which would create a new lock dependency:
495[ 11.130301] (&irq_desc_lock_class){-.-.} -> (&(&ctl->lock)->rlock){+.+.}
496[ 11.137031]
497[ 11.137031] but this new dependency connects a HARDIRQ-irq-safe lock:
498[ 11.144880] (&irq_desc_lock_class){-.-.}
499[ 11.144884]
500[ 11.144884] ... which became HARDIRQ-irq-safe at:
501[ 11.154975] lock_acquire+0xe0/0x280
502[ 11.158593] _raw_spin_lock+0x48/0x60
503[ 11.162301] handle_fasteoi_irq+0x2c/0x130
504[ 11.166442] generic_handle_irq+0x2c/0x40
505[ 11.170495] __handle_domain_irq+0x68/0xc0
506[ 11.174636] gic_handle_irq+0x58/0xa8
507[ 11.178343] el1_irq+0xf4/0x1c0
508[ 11.181535] arch_cpu_idle+0x40/0x240
509[ 11.185243] default_idle_call+0x20/0x3c
510[ 11.189213] do_idle+0x214/0x288
511[ 11.192489] cpu_startup_entry+0x28/0x48
512[ 11.196456] rest_init+0x1dc/0x2ac
513[ 11.199908] arch_call_rest_init+0x14/0x1c
514[ 11.204046] start_kernel+0x4b8/0x4cc
515[ 11.207753]
516[ 11.207753] to a HARDIRQ-irq-unsafe lock:
517[ 11.213189] (&(&ctl->lock)->rlock){+.+.}
518[ 11.213192]
519[ 11.213192] ... which became HARDIRQ-irq-unsafe at:
520[ 11.223453] ...
521[ 11.223456] lock_acquire+0xe0/0x280
522[ 11.228799] _raw_spin_lock+0x48/0x60
523[ 11.232508] meson_gpio_irq_domain_alloc+0x98/0x290
524[ 11.237426] __irq_domain_alloc_irqs+0xfc/0x348
525[ 11.241998] irq_create_fwspec_mapping+0x100/0x2f8
526[ 11.246827] irq_create_of_mapping+0x58/0x60
527[ 11.251140] of_irq_get+0x38/0x48
528[ 11.254502] of_mdiobus_register_phy+0x80/0x1e8
529[ 11.259074] of_mdiobus_register.part.0+0x7c/0x2c0
530[ 11.263904] of_mdiobus_register+0x90/0xb8
531[ 11.268048] mdio_mux_init+0x110/0x2d0 [mdio_mux]
532[ 11.272791] g12a_mdio_mux_probe+0x238/0x358 [mdio_mux_meson_g12a]
533[ 11.279002] platform_drv_probe+0x58/0xa8
534[ 11.283051] really_probe+0xe0/0x430
535[ 11.286673] driver_probe_device+0xe4/0x138
536[ 11.290900] __device_attach_driver+0x90/0x110
537[ 11.295385] bus_for_each_drv+0x6c/0xa8
538[ 11.299265] __device_attach+0xd8/0x170
539[ 11.303147] device_initial_probe+0x18/0x20
540[ 11.307373] bus_probe_device+0xa0/0xa8
541[ 11.311254] deferred_probe_work_func+0xa0/0xf0
542[ 11.315827] process_one_work+0x294/0x6c8
543[ 11.319879] worker_thread+0x50/0x410
544[ 11.323589] kthread+0x100/0x128
545[ 11.326866] ret_from_fork+0x10/0x18
546[ 11.330486]
547[ 11.330486] other info that might help us debug this:
548[ 11.330486]
549[ 11.338427] Possible interrupt unsafe locking scenario:
550[ 11.338427]
551[ 11.345152] CPU0 CPU1
552[ 11.349635] ---- ----
553[ 11.354119] lock(&(&ctl->lock)->rlock);
554[ 11.358087] local_irq_disable();
555[ 11.363953] lock(&irq_desc_lock_class);
556[ 11.370422] lock(&(&ctl->lock)->rlock);
557[ 11.376891] <Interrupt>
558[ 11.379475] lock(&irq_desc_lock_class);
559[ 11.383617]
560[ 11.383617] *** DEADLOCK ***
561[ 11.383617]
562[ 11.389486] 3 locks held by NetworkManager/578:
563[ 11.393967] #0: ffff800011c08858 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x154/0x4c0
564[ 11.401906] #1: ffff0000b273be20 (&desc->request_mutex){+.+.}, at: __setup_irq+0xb8/0x8b8
565[ 11.410100] #2: ffff0000b273bcc0 (&irq_desc_lock_class){-.-.}, at: __setup_irq+0xdc/0x8b8
566[ 11.418294]
567[ 11.418294] the dependencies between HARDIRQ-irq-safe lock and the holding lock:
568[ 11.427097] -> (&irq_desc_lock_class){-.-.} {
569[ 11.431400] IN-HARDIRQ-W at:
570[ 11.434505] lock_acquire+0xe0/0x280
571[ 11.439682] _raw_spin_lock+0x48/0x60
572[ 11.444943] handle_fasteoi_irq+0x2c/0x130
573[ 11.450637] generic_handle_irq+0x2c/0x40
574[ 11.456243] __handle_domain_irq+0x68/0xc0
575[ 11.461935] gic_handle_irq+0x58/0xa8
576[ 11.467195] el1_irq+0xf4/0x1c0
577[ 11.471940] arch_cpu_idle+0x40/0x240
578[ 11.477200] default_idle_call+0x20/0x3c
579[ 11.482722] do_idle+0x214/0x288
580[ 11.487551] cpu_startup_entry+0x28/0x48
581[ 11.493071] rest_init+0x1dc/0x2ac
582[ 11.498073] arch_call_rest_init+0x14/0x1c
583[ 11.503766] start_kernel+0x4b8/0x4cc
584[ 11.509026] IN-SOFTIRQ-W at:
585[ 11.512130] lock_acquire+0xe0/0x280
586[ 11.517307] _raw_spin_lock+0x48/0x60
587[ 11.522568] handle_fasteoi_irq+0x2c/0x130
588[ 11.528262] generic_handle_irq+0x2c/0x40
589[ 11.533868] __handle_domain_irq+0x68/0xc0
590[ 11.539559] gic_handle_irq+0x58/0xa8
591[ 11.544820] el1_irq+0xf4/0x1c0
592[ 11.549566] kmem_cache_free+0x210/0x428
593[ 11.555087] inode_free_by_rcu+0x20/0x28
594[ 11.560606] rcu_do_batch+0x200/0x520
595[ 11.565866] rcu_core+0x170/0x2f8
596[ 11.570782] rcu_core_si+0x14/0x20
597[ 11.575784] __do_softirq+0x148/0x570
598[ 11.581047] run_ksoftirqd+0x48/0x78
599[ 11.586222] smpboot_thread_fn+0x12c/0x248
600[ 11.591914] kthread+0x100/0x128
601[ 11.596743] ret_from_fork+0x10/0x18
602[ 11.601917] INITIAL USE at:
603[ 11.604935] lock_acquire+0xe0/0x280
604[ 11.610026] _raw_spin_lock_irqsave+0x60/0x88
605[ 11.615892] __irq_get_desc_lock+0x5c/0x98
606[ 11.621498] irq_modify_status+0x2c/0x110
607[ 11.627018] irq_set_percpu_devid_partition+0x84/0xa8
608[ 11.633574] irq_set_percpu_devid+0x18/0x20
609[ 11.639267] gic_irq_domain_map+0x38/0xe0
610[ 11.644786] gic_irq_domain_alloc+0x70/0x90
611[ 11.650478] __irq_domain_alloc_irqs+0xfc/0x348
612[ 11.656516] irq_create_fwspec_mapping+0x100/0x2f8
613[ 11.662812] irq_create_of_mapping+0x58/0x60
614[ 11.668590] irq_of_parse_and_map+0x30/0x38
615[ 11.674284] gic_of_init+0x308/0x3a0
616[ 11.679372] of_irq_init+0x1e4/0x3c4
617[ 11.684459] irqchip_init+0x1c/0x40
618[ 11.689462] init_IRQ+0x164/0x194
619[ 11.694291] start_kernel+0x334/0x4cc
620[ 11.699465] }
621[ 11.701107] ... key at: [<ffff8000129c0e30>] irq_desc_lock_class+0x0/0x10
622[ 11.708352] ... acquired at:
623[ 11.711281] check_prevs_add+0x164/0xa58
624[ 11.715336] validate_chain+0x4ac/0x850
625[ 11.719303] __lock_acquire+0x364/0x840
626[ 11.723270] lock_acquire+0xe0/0x280
627[ 11.726979] _raw_spin_lock+0x48/0x60
628[ 11.730775] meson_gpio_irq_set_type+0x88/0x15c
629[ 11.735434] __irq_set_trigger+0x60/0x1c0
630[ 11.739573] __setup_irq+0x3dc/0x8b8
631[ 11.743282] request_threaded_irq+0xe0/0x198
632[ 11.747683] phy_request_interrupt+0x40/0xe0
633[ 11.752085] phylink_bringup_phy+0x144/0x230 [phylink]
634[ 11.757345] phylink_of_phy_connect+0x94/0x130 [phylink]
635[ 11.762793] stmmac_open+0x46c/0x648 [stmmac]
636[ 11.767261] __dev_open+0xb4/0x1a8
637[ 11.770794] __dev_change_flags+0x170/0x1c8
638[ 11.775107] dev_change_flags+0x28/0x68
639[ 11.779075] do_setlink+0x7cc/0x978
640[ 11.782697] __rtnl_newlink+0x3d0/0x760
641[ 11.786665] rtnl_newlink+0x54/0x80
642[ 11.790287] rtnetlink_rcv_msg+0x17c/0x4c0
643[ 11.794514] netlink_rcv_skb+0x40/0x100
644[ 11.798480] rtnetlink_rcv+0x1c/0x28
645[ 11.802189] netlink_unicast+0x198/0x260
646[ 11.806243] netlink_sendmsg+0x1d8/0x3e8
647[ 11.810298] sock_sendmsg+0x4c/0x58
648[ 11.813920] ____sys_sendmsg+0x278/0x2a8
649[ 11.817974] ___sys_sendmsg+0x70/0x98
650[ 11.821768] __sys_sendmsg+0x5c/0xa8
651[ 11.825477] __arm64_sys_sendmsg+0x28/0x30
652[ 11.829704] el0_svc_common.constprop.0+0x7c/0x188
653[ 11.834620] el0_svc_handler+0x28/0x88
654[ 11.838501] el0_sync_handler+0x104/0x1b0
655[ 11.842641] el0_sync+0x164/0x180
656[ 11.846089]
657[ 11.847553]
658[ 11.847553] the dependencies between the lock to be acquired
659[ 11.847555] and HARDIRQ-irq-unsafe lock:
660[ 11.858598] -> (&(&ctl->lock)->rlock){+.+.} {
661[ 11.862909] HARDIRQ-ON-W at:
662[ 11.866014] lock_acquire+0xe0/0x280
663[ 11.871191] _raw_spin_lock+0x48/0x60
664[ 11.876452] meson_gpio_irq_domain_alloc+0x98/0x290
665[ 11.882923] __irq_domain_alloc_irqs+0xfc/0x348
666[ 11.889046] irq_create_fwspec_mapping+0x100/0x2f8
667[ 11.895428] irq_create_of_mapping+0x58/0x60
668[ 11.901293] of_irq_get+0x38/0x48
669[ 11.906208] of_mdiobus_register_phy+0x80/0x1e8
670[ 11.912333] of_mdiobus_register.part.0+0x7c/0x2c0
671[ 11.918715] of_mdiobus_register+0x90/0xb8
672[ 11.924409] mdio_mux_init+0x110/0x2d0 [mdio_mux]
673[ 11.930706] g12a_mdio_mux_probe+0x238/0x358 [mdio_mux_meson_g12a]
674[ 11.938471] platform_drv_probe+0x58/0xa8
675[ 11.944072] really_probe+0xe0/0x430
676[ 11.949247] driver_probe_device+0xe4/0x138
677[ 11.955026] __device_attach_driver+0x90/0x110
678[ 11.961064] bus_for_each_drv+0x6c/0xa8
679[ 11.966497] __device_attach+0xd8/0x170
680[ 11.971931] device_initial_probe+0x18/0x20
681[ 11.977710] bus_probe_device+0xa0/0xa8
682[ 11.983143] deferred_probe_work_func+0xa0/0xf0
683[ 11.989268] process_one_work+0x294/0x6c8
684[ 11.994873] worker_thread+0x50/0x410
685[ 12.000135] kthread+0x100/0x128
686[ 12.004965] ret_from_fork+0x10/0x18
687[ 12.010138] SOFTIRQ-ON-W at:
688[ 12.013242] lock_acquire+0xe0/0x280
689[ 12.018419] _raw_spin_lock+0x48/0x60
690[ 12.023681] meson_gpio_irq_domain_alloc+0x98/0x290
691[ 12.030151] __irq_domain_alloc_irqs+0xfc/0x348
692[ 12.036275] irq_create_fwspec_mapping+0x100/0x2f8
693[ 12.042657] irq_create_of_mapping+0x58/0x60
694[ 12.048521] of_irq_get+0x38/0x48
695[ 12.053437] of_mdiobus_register_phy+0x80/0x1e8
696[ 12.059561] of_mdiobus_register.part.0+0x7c/0x2c0
697[ 12.065944] of_mdiobus_register+0x90/0xb8
698[ 12.071637] mdio_mux_init+0x110/0x2d0 [mdio_mux]
699[ 12.077934] g12a_mdio_mux_probe+0x238/0x358 [mdio_mux_meson_g12a]
700[ 12.085698] platform_drv_probe+0x58/0xa8
701[ 12.091301] really_probe+0xe0/0x430
702[ 12.096476] driver_probe_device+0xe4/0x138
703[ 12.102255] __device_attach_driver+0x90/0x110
704[ 12.108292] bus_for_each_drv+0x6c/0xa8
705[ 12.113726] __device_attach+0xd8/0x170
706[ 12.119160] device_initial_probe+0x18/0x20
707[ 12.124938] bus_probe_device+0xa0/0xa8
708[ 12.130372] deferred_probe_work_func+0xa0/0xf0
709[ 12.136496] process_one_work+0x294/0x6c8
710[ 12.142102] worker_thread+0x50/0x410
711[ 12.147364] kthread+0x100/0x128
712[ 12.152193] ret_from_fork+0x10/0x18
713[ 12.157366] INITIAL USE at:
714[ 12.160385] lock_acquire+0xe0/0x280
715[ 12.165475] _raw_spin_lock+0x48/0x60
716[ 12.170651] meson_gpio_irq_domain_alloc+0x98/0x290
717[ 12.177035] __irq_domain_alloc_irqs+0xfc/0x348
718[ 12.183072] irq_create_fwspec_mapping+0x100/0x2f8
719[ 12.189368] irq_create_of_mapping+0x58/0x60
720[ 12.195146] of_irq_get+0x38/0x48
721[ 12.199975] of_mdiobus_register_phy+0x80/0x1e8
722[ 12.206014] of_mdiobus_register.part.0+0x7c/0x2c0
723[ 12.212310] of_mdiobus_register+0x90/0xb8
724[ 12.217917] mdio_mux_init+0x110/0x2d0 [mdio_mux]
725[ 12.224128] g12a_mdio_mux_probe+0x238/0x358 [mdio_mux_meson_g12a]
726[ 12.231806] platform_drv_probe+0x58/0xa8
727[ 12.237322] really_probe+0xe0/0x430
728[ 12.242411] driver_probe_device+0xe4/0x138
729[ 12.248104] __device_attach_driver+0x90/0x110
730[ 12.254055] bus_for_each_drv+0x6c/0xa8
731[ 12.259402] __device_attach+0xd8/0x170
732[ 12.264750] device_initial_probe+0x18/0x20
733[ 12.270442] bus_probe_device+0xa0/0xa8
734[ 12.275789] deferred_probe_work_func+0xa0/0xf0
735[ 12.281827] process_one_work+0x294/0x6c8
736[ 12.287347] worker_thread+0x50/0x410
737[ 12.292522] kthread+0x100/0x128
738[ 12.297265] ret_from_fork+0x10/0x18
739[ 12.302352] }
740[ 12.303993] ... key at: [<ffff8000132b0908>] __key.43587+0x0/0x10
741[ 12.310548] ... acquired at:
742[ 12.313478] check_prevs_add+0x164/0xa58
743[ 12.317533] validate_chain+0x4ac/0x850
744[ 12.321500] __lock_acquire+0x364/0x840
745[ 12.325468] lock_acquire+0xe0/0x280
746[ 12.329176] _raw_spin_lock+0x48/0x60
747[ 12.332972] meson_gpio_irq_set_type+0x88/0x15c
748[ 12.337631] __irq_set_trigger+0x60/0x1c0
749[ 12.341770] __setup_irq+0x3dc/0x8b8
750[ 12.345479] request_threaded_irq+0xe0/0x198
751[ 12.349879] phy_request_interrupt+0x40/0xe0
752[ 12.354281] phylink_bringup_phy+0x144/0x230 [phylink]
753[ 12.359542] phylink_of_phy_connect+0x94/0x130 [phylink]
754[ 12.364988] stmmac_open+0x46c/0x648 [stmmac]
755[ 12.369457] __dev_open+0xb4/0x1a8
756[ 12.372992] __dev_change_flags+0x170/0x1c8
757[ 12.377305] dev_change_flags+0x28/0x68
758[ 12.381272] do_setlink+0x7cc/0x978
759[ 12.384894] __rtnl_newlink+0x3d0/0x760
760[ 12.388862] rtnl_newlink+0x54/0x80
761[ 12.392484] rtnetlink_rcv_msg+0x17c/0x4c0
762[ 12.396711] netlink_rcv_skb+0x40/0x100
763[ 12.400678] rtnetlink_rcv+0x1c/0x28
764[ 12.404387] netlink_unicast+0x198/0x260
765[ 12.408441] netlink_sendmsg+0x1d8/0x3e8
766[ 12.412495] sock_sendmsg+0x4c/0x58
767[ 12.416117] ____sys_sendmsg+0x278/0x2a8
768[ 12.420171] ___sys_sendmsg+0x70/0x98
769[ 12.423966] __sys_sendmsg+0x5c/0xa8
770[ 12.427674] __arm64_sys_sendmsg+0x28/0x30
771[ 12.431901] el0_svc_common.constprop.0+0x7c/0x188
772[ 12.436818] el0_svc_handler+0x28/0x88
773[ 12.440699] el0_sync_handler+0x104/0x1b0
774[ 12.444838] el0_sync+0x164/0x180
775[ 12.448286]
776[ 12.449751]
777[ 12.449751] stack backtrace:
778[ 12.454071] CPU: 5 PID: 578 Comm: NetworkManager Not tainted 5.5.0-0.rc6.git3.1.fc32.aarch64 #1
779[ 12.462698] Hardware name: amlogic w400/w400, BIOS 2020.01-rc4-00038-g94d022bb40-dirty 12/15/2019
780[ 12.471494] Call trace:
781[ 12.473904] dump_backtrace+0x0/0x1b8
782[ 12.477527] show_stack+0x1c/0x28
783[ 12.480805] dump_stack+0xe0/0x148
784[ 12.484168] print_bad_irq_dependency+0x294/0x298
785[ 12.488826] check_irq_usage+0x298/0x3b8
786[ 12.492706] check_prevs_add+0x164/0xa58
787[ 12.496588] validate_chain+0x4ac/0x850
788[ 12.500383] __lock_acquire+0x364/0x840
789[ 12.504178] lock_acquire+0xe0/0x280
790[ 12.507714] _raw_spin_lock+0x48/0x60
791[ 12.511337] meson_gpio_irq_set_type+0x88/0x15c
792[ 12.515823] __irq_set_trigger+0x60/0x1c0
793[ 12.519790] __setup_irq+0x3dc/0x8b8
794[ 12.523326] request_threaded_irq+0xe0/0x198
795[ 12.527553] phy_request_interrupt+0x40/0xe0
796[ 12.531783] phylink_bringup_phy+0x144/0x230 [phylink]
797[ 12.536872] phylink_of_phy_connect+0x94/0x130 [phylink]
798[ 12.542145] stmmac_open+0x46c/0x648 [stmmac]
799[ 12.546442] __dev_open+0xb4/0x1a8
800[ 12.549804] __dev_change_flags+0x170/0x1c8
801[ 12.553944] dev_change_flags+0x28/0x68
802[ 12.557740] do_setlink+0x7cc/0x978
803[ 12.561189] __rtnl_newlink+0x3d0/0x760
804[ 12.564984] rtnl_newlink+0x54/0x80
805[ 12.568434] rtnetlink_rcv_msg+0x17c/0x4c0
806[ 12.572489] netlink_rcv_skb+0x40/0x100
807[ 12.576283] rtnetlink_rcv+0x1c/0x28
808[ 12.579819] netlink_unicast+0x198/0x260
809[ 12.583701] netlink_sendmsg+0x1d8/0x3e8
810[ 12.587582] sock_sendmsg+0x4c/0x58
811[ 12.591032] ____sys_sendmsg+0x278/0x2a8
812[ 12.594913] ___sys_sendmsg+0x70/0x98
813[ 12.598535] __sys_sendmsg+0x5c/0xa8
814[ 12.602072] __arm64_sys_sendmsg+0x28/0x30
815[ 12.606126] el0_svc_common.constprop.0+0x7c/0x188
816[ 12.610870] el0_svc_handler+0x28/0x88
817[ 12.614579] el0_sync_handler+0x104/0x1b0
818[ 12.618546] el0_sync+0x164/0x180
819[ 12.647664] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
820[ 12.649618] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
821[ 12.656923] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
822[ 14.833064] systemd-udevd (500) used greatest stack depth: 12208 bytes left
823[ 14.834412] systemd-udevd (505) used greatest stack depth: 9728 bytes left
824[ 16.161266] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
825[ 16.164299] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
826[ OK ] Found device /dev/mapper/fedora-root.
827[ OK ] Reached target Initrd Root Device.
828[ 17.135045] audit: type=1130 audit(1576406839.340:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
829
830[ OK ] Reached target Remote File Systems (Pre).
831[ OK ] Reached target Remote File Systems.
832 Starting File System Check on /dev/mapper/fedora-root...
833[ OK ] Started File System Check on /dev/ma[ 17.295788] audit: type=1130 audit(1576406839.500:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
834pper/fedora-root.
835 Mounting /sysroot...
836[ 17.719801] SGI XFS with ACLs, security attributes, scrub, verbose warnings, quota, no debug enabled
837[ 17.726060] *** VALIDATE xfs ***
838[ 17.739527] XFS (dm-0): Mounting V5 Filesystem
839[ 18.584820] XFS (dm-0): Ending clean mount
840[ OK ] Mounted /sysroot.
841[ OK ] Reached target Initrd Root File System.
842 Starting Reload Configuration from the Real Root...
843[ OK ] Started Reload Configuration from the[ 19.378026] audit: type=1130 audit(1576406841.580:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
844[ 19.397851] audit: type=1131 audit(1576406841.580:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
845 Real Root.
846[ OK ] Reached target Initrd File Systems.
847[ OK ] Reached target Initrd Default Target.
848 Starting dracut pre-pivot and cleanup hook...
849[ OK ] Started dracut pre-pivot and cleanup[ 19.670066] audit: type=1130 audit(1576406841.870:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
850 hook.
851 Starting Cleaning Up and Shutting Down Daemons...
852[ OK ] Stopped target Timers.
853[ OK [ 19.718668] audit: type=1131 audit(1576406841.920:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
854] Stopped dracut pre-pivot and cleanup hook.
855[ OK ] Stopped target Initr[ 19.747814] audit: type=1131 audit(1576406841.950:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
856d Default Target.
857[ OK ] Stopped target [ 19.773563] audit: type=1131 audit(1576406841.970:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
858[ 19.793426] audit: type=1131 audit(1576406841.990:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
859[ 19.813477] audit: type=1131 audit(1576406842.010:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
860Basic System.
861[ OK ] Stopped target Initrd Root Device.
862[ OK ] Stopped target Paths.
863[ OK ] Stopped target Remote File Systems.
864[ OK ] Stopped target Remote File Systems (Pre).
865[ OK ] Stopped target Slices.
866[ OK ] Stopped target Sockets.
867[ OK ] Stopped target System Initialization.
868[ OK ] Stopped target Swap.
869[ OK ] Stopped dracut initqueue hook.
870 Starting Plymouth switch root service...
871[ OK ] Stopped Apply Kernel Variables.
872[ OK ] Stopped Load Kernel Modules.
873[ OK ] Stopped Create Volatile Files and Directories.
874[ OK ] Stopped target Local File Systems.
875[ OK ] Stopped udev Coldplug all Devices.
876 Stopping udev Kernel Device Manager...
877 Starting Setup Virtual Console...
878[ OK ] Stopped udev Kernel Device Manager.
879[ OK ] Started Plymouth switch root service.
880[ OK ] Closed udev Control Socket.
881[ OK ] Closed udev Kernel Socket.
882[ OK ] Stopped dracut pre-udev hook.
883[ OK ] Stopped dracut cmdline hook.
884 Starting Cleanup udevd DB...
885[ OK ] Stopped Create Static Device Nodes in /dev.
886[ OK ] Stopped Create list of sta… nodes for the current kernel.
887[ OK ] Started Cleaning Up and Shutting Down Daemons.
888[ OK ] Started Cleanup udevd DB.
889[ OK ] Started Setup Virtual Console.
890[ OK ] Reached target Switch Root.
891 Starting Switch Root...
892[ 20.374867] systemd-journald[374]: Received SIGTERM from PID 1 (systemd).
893[ 20.494339] Unable to handle kernel paging request at virtual address ffff800000400360
894[ 20.496659] Mem abort info:
895[ 20.499368] ESR = 0x96000006
896[ 20.502388] EC = 0x25: DABT (current EL), IL = 32 bits
897[ 20.507668] SET = 0, FnV = 0
898[ 20.510666] EA = 0, S1PTW = 0
899[ 20.513771] Data abort info:
900[ 20.516630] ISV = 0, ISS = 0x00000006
901[ 20.520414] CM = 0, WnR = 0
902[ 20.523347] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000001344000
903[ 20.530007] [ffff800000400360] pgd=00000000f4fff003, pud=00000000f4ffe003, pmd=0000000000000000
904[ 20.538640] Internal error: Oops: 96000006 [#1] SMP
905[ 20.543446] Modules linked in: xfs libcrc32c mmc_block xhci_plat_hcd dwc3 meson_gxl ulpi nvme dwc2 nvme_core udc_core rtc_hym8563 dwmac_generic dwc3_meson_g12a roles meson_canvas i2c_meson clk_pwm pwm_meson meson_gx_mmc rtc_meson_vrtc dwmac_meson8b stmmac_platform stmmac mdio_mux_meson_g12a mdio_mux phylink phy_meson_g12a_usb3_pcie adc_keys industrialio gpio_keys_polled pkcs8_key_parser fuse
906[ 20.577934] CPU: 5 PID: 1 Comm: systemd Not tainted 5.5.0-0.rc6.git3.1.fc32.aarch64 #1
907[ 20.585715] Hardware name: amlogic w400/w400, BIOS 2020.01-rc4-00038-g94d022bb40-dirty 12/15/2019
908[ 20.594516] pstate: 20400005 (nzCv daif +PAN -UAO)
909[ 20.599257] pc : dentry_unlink_inode+0x94/0x150
910[ 20.603734] lr : dentry_unlink_inode+0x148/0x150
911[ 20.608303] sp : ffff80001003bd30
912[ 20.611578] x29: ffff80001003bd30 x28: ffff0000f31ea9c0
913[ 20.616843] x27: 0000000000000000 x26: 0000000000000000
914[ 20.622105] x25: ffff0000f2f6f480 x24: ffff0000f2f6f558
915[ 20.627366] x23: ffff0000f2f694c0 x22: ffff0000f2f6f480
916[ 20.632627] x21: ffff0000f2f694c0 x20: ffff0000f2f6f480
917[ 20.637888] x19: ffff0000f2f69440 x18: 0000000000000000
918[ 20.643149] x17: 0000000000000000 x16: 0000000000000000
919[ 20.648411] x15: 0000000000000000 x14: 0000000000000000
920[ 20.653672] x13: 0000000000000000 x12: 0000000000000000
921[ 20.658933] x11: ffff800011989000 x10: 0000000000000000
922[ 20.664195] x9 : ffff80001041e664 x8 : 0000000000000000
923[ 20.669456] x7 : ffff80001041e5b8 x6 : 0000000000000000
924[ 20.674717] x5 : 00000000000009ef x4 : 0000000000000001
925[ 20.679978] x3 : ffff0000f31ea9c0 x2 : 0000000000000000
926[ 20.685240] x1 : ffff8000e326e000 x0 : ffff800000400320
927[ 20.690501] Call trace:
928[ 20.692912] dentry_unlink_inode+0x94/0x150
929[ 20.697056] d_delete+0x88/0x98
930[ 20.700160] vfs_unlink+0x1d8/0x210
931[ 20.703608] do_unlinkat+0x164/0x280
932[ 20.707145] __arm64_sys_unlinkat+0x44/0x70
933[ 20.711288] el0_svc_common.constprop.0+0x7c/0x188
934[ 20.716031] el0_svc_handler+0x28/0x88
935[ 20.719740] el0_sync_handler+0x104/0x1b0
936[ 20.723706] el0_sync+0x164/0x180
937[ 20.726988] Code: b9404a80 34000420 f9406260 b4000120 (f9402002)
938[ 20.733036] ---[ end trace 0d52339006e6bfbb ]---
939[ 20.737662] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
940[ 20.745197] SMP: stopping secondary CPUs
941[ 20.749069] Kernel Offset: disabled
942[ 20.752512] CPU features: 0x00002,20082004
943[ 20.756566] Memory Limit: none
944[ 20.759591] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---