· 6 years ago · Oct 25, 2019, 10:38 AM
1System Information
2------------------
3
4Raspberry Pi 4 Model B Rev 1.1
5PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
6NAME="Raspbian GNU/Linux"
7VERSION_ID="10"
8VERSION="10 (buster)"
9
10Raspberry Pi reference 2017-01-11
11Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 21a681692ac70e77d3ebe1dd2a76b31de1a72d89, stage2
12
13Linux raspi3 4.19.75-v7l+ #1270 SMP Tue Sep 24 18:51:41 BST 2019 armv7l GNU/Linux
14Revision : c03111
15Serial : 10000000fcb82b01
16Model : Raspberry Pi 4 Model B Rev 1.1
17Throttled flag : throttled=0x0
18Camera : supported=0 detected=0
19
20Videocore information
21---------------------
22
23Sep 24 2019 17:34:30
24Copyright (c) 2012 Broadcom
25version cd3add54955f8fa065b414d8fc07c525e7ddffc8 (clean) (release) (start)
26
27alloc failures: 0
28compactions: 0
29legacy block fails: 0
30
31Filesystem information
32----------------------
33Filesystem 1K-blocks Used Available Use% Mounted on
34/dev/root 30465864 3143740 26035468 11% /
35devtmpfs 1890124 0 1890124 0% /dev
36tmpfs 2022220 536 2021684 1% /dev/shm
37tmpfs 2022220 9692 2012528 1% /run
38tmpfs 5120 4 5116 1% /run/lock
39tmpfs 2022220 0 2022220 0% /sys/fs/cgroup
40tmpfs 102400 320 102080 1% /var/log
41tmpfs 102400 0 102400 0% /tmp
42tmpfs 30720 0 30720 0% /var/tmp
43tmpfs 102400 8 102392 1% /var/log/apache2
44/dev/mmcblk0p1 248012 53053 194959 22% /boot
45tmpfs 404444 0 404444 0% /run/user/1000
46
47Filename Type Size Used Priority
48
49Package version information
50---------------------------
51raspberrypi-ui-mods:
52 Installed: (none)
53raspberrypi-sys-mods:
54 Installed: 20190730
55openbox:
56 Installed: (none)
57lxpanel:
58 Installed: (none)
59pcmanfm:
60 Installed: (none)
61rpd-plym-splash:
62 Installed: (none)
63
64Networking Information
65----------------------
66
67eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
68 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
69 inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
70 ether m.m.m.m txqueuelen 1000 (Ethernet)
71 RX packets 1141 bytes 142495 (139.1 KiB)
72 RX errors 0 dropped 0 overruns 0 frame 0
73 TX packets 916 bytes 279375 (272.8 KiB)
74 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
75
76lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
77 inet x.x.x.x netmask x.x.x.x
78 inet6 ::1 prefixlen 128 scopeid 0x10<host>
79 loop txqueuelen 1000 (Local Loopback)
80 RX packets 105 bytes 9062 (8.8 KiB)
81 RX errors 0 dropped 0 overruns 0 frame 0
82 TX packets 105 bytes 9062 (8.8 KiB)
83 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
84
85tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
86 inet x.x.x.x netmask x.x.x.x destination x.x.x.x
87 inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
88 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC)
89 RX packets 0 bytes 0 (0.0 B)
90 RX errors 0 dropped 0 overruns 0 frame 0
91 TX packets 5 bytes 240 (240.0 B)
92 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
93
94
95USB Information
96---------------
97
98/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
99/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
100 |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
101 |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
102/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
103 |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
104 |__ Port 3: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
105
106config.txt
107----------
108
109arm_freq=1500
110audio_pwm_mode=514
111config_hdmi_boost=5
112core_freq=500
113core_freq_min=200
114disable_commandline_tags=2
115disable_l2cache=1
116display_hdmi_rotate=-1
117display_lcd_rotate=-1
118enable_gic=1
119force_eeprom_read=1
120force_pwm_open=1
121framebuffer_ignore_alpha=1
122framebuffer_swap=1
123gpu_freq=500
124gpu_freq_min=500
125hdmi_safe=1
126init_uart_clock=0x2dc6c00
127lcd_framerate=60
128mask_gpu_interrupt0=3072
129mask_gpu_interrupt1=26370
130overscan_bottom=16
131overscan_left=24
132overscan_right=24
133overscan_top=16
134pause_burst_frames=1
135program_serial_random=1
136temp_soft_limit=70
137hdmi_drive:0=2
138hdmi_force_cec_address:0=65535
139hdmi_force_cec_address:1=65535
140hdmi_force_hotplug:0=1
141hdmi_force_hotplug:1=1
142hdmi_group:0=2
143hdmi_group:1=2
144hdmi_mode:0=4
145hdmi_mode:1=4
146hdmi_pixel_freq_limit:0=0x11e1a300
147hdmi_pixel_freq_limit:1=0x11e1a300
148device_tree=-
149hdmi_cvt:0=
150hdmi_cvt:1=
151hdmi_edid_filename:0=
152hdmi_edid_filename:1=
153hdmi_timings:0=
154hdmi_timings:1=
155
156cmdline.txt
157-----------
158coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 smsc95xx.macaddr=DC:A6:32:17:2F:FE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=4cf28e78-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
159
160raspi-gpio settings
161-------------------
162
163BANK0 (GPIO 0 to 27):
164GPIO 0: level=1 fsel=0 func=INPUT pull=UP
165GPIO 1: level=1 fsel=0 func=INPUT pull=UP
166GPIO 2: level=1 fsel=0 func=INPUT pull=UP
167GPIO 3: level=1 fsel=0 func=INPUT pull=UP
168GPIO 4: level=1 fsel=0 func=INPUT pull=UP
169GPIO 5: level=1 fsel=0 func=INPUT pull=UP
170GPIO 6: level=1 fsel=0 func=INPUT pull=UP
171GPIO 7: level=1 fsel=0 func=INPUT pull=UP
172GPIO 8: level=1 fsel=0 func=INPUT pull=UP
173GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
174GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
175GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
176GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
177GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
178GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
179GPIO 15: level=1 fsel=0 func=INPUT pull=UP
180GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
181GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
182GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
183GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
184GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
185GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
186GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
187GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
188GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
189GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
190GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
191GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
192BANK1 (GPIO 28 to 45):
193GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
194GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
195GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
196GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
197GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
198GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
199GPIO 34: level=1 fsel=0 func=INPUT pull=UP
200GPIO 35: level=1 fsel=0 func=INPUT pull=UP
201GPIO 36: level=1 fsel=0 func=INPUT pull=UP
202GPIO 37: level=1 fsel=0 func=INPUT pull=UP
203GPIO 38: level=1 fsel=0 func=INPUT pull=UP
204GPIO 39: level=1 fsel=0 func=INPUT pull=UP
205GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
206GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
207GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
208GPIO 43: level=1 fsel=0 func=INPUT pull=UP
209GPIO 44: level=1 fsel=0 func=INPUT pull=UP
210GPIO 45: level=1 fsel=0 func=INPUT pull=UP
211BANK2 (GPIO 46 to 53):
212GPIO 46: level=0 fsel=0 func=INPUT pull=DOWN
213GPIO 47: level=0 fsel=0 func=INPUT pull=DOWN
214GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
215GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
216GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
217GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
218GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
219GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN
220
221vcdbg log messages
222------------------
223
224002942.260: arasan: arasan_emmc_open
225002944.433: arasan: arasan_emmc_set_clock C0: 0x00000000 C1: 0x000ef447 emmc: 200000000 actual: 200000 div: 0x000001f4 target: 200000 min: 100000 max: 400000 delay: 10
226003061.178: arasan: arasan_emmc_set_clock C0: 0x00000000 C1: 0x000ef447 emmc: 200000000 actual: 200000 div: 0x000001f4 target: 200000 min: 100000 max: 400000 delay: 10
227003068.332: arasan: arasan_emmc_set_clock C0: 0x00000f00 C1: 0x000e01c7 emmc: 200000000 actual: 130039 div: 0x00000301 target: 130000 min: 100000 max: 400000 delay: 15
228003111.583: arasan: arasan_emmc_set_clock C0: 0x00000f06 C1: 0x000e0307 emmc: 200000000 actual: 33333333 div: 0x00000003 target: 40000000 min: 0 max: 40000000 delay: 1
229003120.116: brfs: File read: /mfs/sd/config.txt
230003120.912: brfs: File read: 1825 bytes
231003183.464: brfs: File read: /mfs/sd/config.txt
232003384.507: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
233003386.990: *** Restart logging
234003387.031: brfs: File read: 1825 bytes
235003429.294: HDMI0: hdmi_pixel_encoding: 300000000
236
237003429.309: HDMI1: hdmi_pixel_encoding: 300000000
238
239003430.722: brfs: File read: /mfs/sd/cmdline.txt
240003430.803: Read command line from file 'cmdline.txt':
241003430.842: 'dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=4cf28e78-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait'
242003435.383: brfs: File read: 320 bytes
243003440.477: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
244003440.511: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0x9e6f
245003662.311: brfs: File read: 40559 bytes
246003664.950: brfs: File read: /mfs/sd/config.txt
247003665.945: brfs: File read: 1825 bytes
248003683.772: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d.dtbo
249003818.150: Loaded overlay 'vc4-kms-v3d'
250004102.385: brfs: File read: 2337 bytes
251004112.064: brfs: File read: /mfs/sd/overlays/pi3-disable-wifi.dtbo
252004150.527: Loaded overlay 'pi3-disable-wifi'
253005660.884: brfs: File read: 387 bytes
254006704.738: brfs: File read: /mfs/sd/kernel7l.img
255006704.823: Loading 'kernel7l.img' to 0x8000 size 0x55e088
256006704.910: Device tree loaded to 0x2eff5b00 (size 0xa445)
257006707.651: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
258009439.012: vchiq_core: vchiq_init_state: slot_zero = 0xded80000, is_master = 1
259009450.629: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000004
260009450.752: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000004
261019338.517: brfs: File read: 5628040 bytes
262
263dmesg log
264---------
265
266[ 0.000000] Booting Linux on physical CPU 0x0
267[ 0.000000] Linux version 4.19.75-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1270 SMP Tue Sep 24 18:51:41 BST 2019
268[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
269[ 0.000000] CPU: div instructions available: patching division code
270[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
271[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
272[ 0.000000] Memory policy: Data cache writealloc
273[ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
274[ 0.000000] On node 0 totalpages: 1024000
275[ 0.000000] DMA zone: 1728 pages used for memmap
276[ 0.000000] DMA zone: 0 pages reserved
277[ 0.000000] DMA zone: 196608 pages, LIFO batch:63
278[ 0.000000] HighMem zone: 827392 pages, LIFO batch:63
279[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
280[ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
281[ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
282[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
283[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1022272
284[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 video=HDMI-A-2:640x480M@60,margin_left=24,margin_right=24,margin_top=16,margin_bottom=16 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=4cf28e78-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
285[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
286[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
287[ 0.000000] Memory: 3780252K/4096000K available (8192K kernel code, 661K rwdata, 2352K rodata, 2048K init, 850K bss, 53604K reserved, 262144K cma-reserved, 3309568K highmem)
288[ 0.000000] Virtual kernel memory layout:
289 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
290 fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
291 vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
292 lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
293 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
294 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
295 .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
296 .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
297 .data : 0x(ptrval) - 0x(ptrval) ( 662 kB)
298 .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB)
299[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
300[ 0.000000] ftrace: allocating 28124 entries in 83 pages
301[ 0.000000] rcu: Hierarchical RCU implementation.
302[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
303[ 0.000000] GIC: Using split EOI/Deactivate mode
304[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
305[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
306[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
307[ 0.000021] Switching to timer-based delay loop, resolution 18ns
308[ 0.000250] Console: colour dummy device 80x30
309[ 0.000731] console [tty1] enabled
310[ 0.000783] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
311[ 0.000825] pid_max: default: 32768 minimum: 301
312[ 0.001098] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
313[ 0.001131] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
314[ 0.001890] CPU: Testing write buffer coherency: ok
315[ 0.002317] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
316[ 0.002968] Setting up static identity map for 0x200000 - 0x20003c
317[ 0.003139] rcu: Hierarchical SRCU implementation.
318[ 0.004019] smp: Bringing up secondary CPUs ...
319[ 0.004938] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
320[ 0.005975] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
321[ 0.006975] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
322[ 0.007105] smp: Brought up 1 node, 4 CPUs
323[ 0.007173] SMP: Total of 4 processors activated (432.00 BogoMIPS).
324[ 0.007196] CPU: All CPU(s) started in HYP mode.
325[ 0.007216] CPU: Virtualization extensions available.
326[ 0.008023] devtmpfs: initialized
327[ 0.018316] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
328[ 0.018544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
329[ 0.018587] futex hash table entries: 1024 (order: 4, 65536 bytes)
330[ 0.026126] pinctrl core: initialized pinctrl subsystem
331[ 0.026988] NET: Registered protocol family 16
332[ 0.030139] DMA: preallocated 1024 KiB pool for atomic coherent allocations
333[ 0.031573] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
334[ 0.031604] hw-breakpoint: maximum watchpoint size is 8 bytes.
335[ 0.031811] Serial: AMBA PL011 UART driver
336[ 0.035132] bcm2835-mbox fe00b880.mailbox: mailbox enabled
337[ 0.072198] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
338[ 0.074557] vgaarb: loaded
339[ 0.074934] SCSI subsystem initialized
340[ 0.075152] usbcore: registered new interface driver usbfs
341[ 0.075217] usbcore: registered new interface driver hub
342[ 0.075327] usbcore: registered new device driver usb
343[ 0.090418] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-09-24 17:34, variant start
344[ 0.100104] raspberrypi-firmware soc:firmware: Firmware hash is cd3add54955f8fa065b414d8fc07c525e7ddffc8
345[ 0.111641] clocksource: Switched to clocksource arch_sys_counter
346[ 0.189035] VFS: Disk quotas dquot_6.6.0
347[ 0.189140] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
348[ 0.189312] FS-Cache: Loaded
349[ 0.189509] CacheFiles: Loaded
350[ 0.190073] simple-framebuffer 3eb77000.framebuffer: framebuffer at 0x3eb77000, 0x81800 bytes, mapped to 0x(ptrval)
351[ 0.190111] simple-framebuffer 3eb77000.framebuffer: format=r5g6b5, mode=592x448x16, linelength=1184
352[ 0.191432] Console: switching to colour frame buffer device 74x28
353[ 0.193237] simple-framebuffer 3eb77000.framebuffer: fb0: simplefb registered!
354[ 0.203505] NET: Registered protocol family 2
355[ 0.204793] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
356[ 0.206122] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
357[ 0.207554] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
358[ 0.208361] TCP: Hash tables configured (established 8192 bind 8192)
359[ 0.209218] UDP hash table entries: 512 (order: 2, 16384 bytes)
360[ 0.209977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
361[ 0.211001] NET: Registered protocol family 1
362[ 0.212308] RPC: Registered named UNIX socket transport module.
363[ 0.213029] RPC: Registered udp transport module.
364[ 0.213728] RPC: Registered tcp transport module.
365[ 0.214404] RPC: Registered tcp NFSv4.1 backchannel transport module.
366[ 0.215086] PCI: CLS 0 bytes, default 64
367[ 0.218145] Initialise system trusted keyrings
368[ 0.219005] workingset: timestamp_bits=14 max_order=20 bucket_order=6
369[ 0.228617] FS-Cache: Netfs 'nfs' registered for caching
370[ 0.229801] NFS: Registering the id_resolver key type
371[ 0.230494] Key type id_resolver registered
372[ 0.231149] Key type id_legacy registered
373[ 0.231854] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
374[ 0.235338] Key type asymmetric registered
375[ 0.235983] Asymmetric key parser 'x509' registered
376[ 0.236714] bounce: pool size: 64 pages
377[ 0.237353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
378[ 0.238693] io scheduler noop registered
379[ 0.239289] io scheduler deadline registered (default)
380[ 0.240018] io scheduler cfq registered
381[ 0.240592] io scheduler mq-deadline registered (default)
382[ 0.241162] io scheduler kyber registered
383[ 0.275577] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
384[ 0.276735] brcm-pcie fd500000.pcie: could not get clock
385[ 0.277393] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
386[ 0.278594] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
387[ 0.331668] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
388[ 0.332573] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
389[ 0.333209] pci_bus 0000:00: root bus resource [bus 00-01]
390[ 0.333850] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
391[ 0.335098] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
392[ 0.335239] pci 0000:00:00.0: PME# supported from D0 D3hot
393[ 0.337990] PCI: bus0: Fast back to back transfers disabled
394[ 0.338626] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
395[ 0.340064] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
396[ 0.340189] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
397[ 0.340508] pci 0000:01:00.0: PME# supported from D0 D3cold
398[ 0.343275] PCI: bus1: Fast back to back transfers disabled
399[ 0.343932] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
400[ 0.343979] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
401[ 0.345240] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
402[ 0.346620] pci 0000:00:00.0: PCI bridge to [bus 01]
403[ 0.347320] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
404[ 0.348881] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
405[ 0.349756] pcieport 0000:00:00.0: Signaling PME with IRQ 63
406[ 0.350601] pcieport 0000:00:00.0: AER enabled with IRQ 63
407[ 0.351449] pci 0000:01:00.0: enabling device (0140 -> 0142)
408[ 0.355563] iproc-rng200 fe104000.rng: hwrng registered
409[ 0.356466] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
410[ 0.358277] vc-sm: Videocore shared memory driver
411[ 0.359357] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
412[ 0.370685] brd: module loaded
413[ 0.381038] loop: module loaded
414[ 0.382523] Loading iSCSI transport class v2.0-870.
415[ 0.384847] libphy: Fixed MDIO Bus: probed
416[ 0.385918] bcmgenet fd580000.genet: failed to get enet clock
417[ 0.386571] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
418[ 0.387206] bcmgenet fd580000.genet: failed to get enet-wol clock
419[ 0.387826] bcmgenet fd580000.genet: failed to get enet-eee clock
420[ 0.388422] bcmgenet: Skipping UMAC reset
421[ 0.389209] unimac-mdio unimac-mdio.-19: DMA mask not set
422[ 0.401669] libphy: bcmgenet MII bus: probed
423[ 0.442168] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
424[ 0.444158] usbcore: registered new interface driver r8152
425[ 0.444797] usbcore: registered new interface driver lan78xx
426[ 0.445419] usbcore: registered new interface driver smsc95xx
427[ 0.446271] xhci_hcd 0000:01:00.0: xHCI Host Controller
428[ 0.446866] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
429[ 0.450199] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
430[ 0.451597] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 64
431[ 0.453593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
432[ 0.454794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
433[ 0.456028] usb usb1: Product: xHCI Host Controller
434[ 0.456677] usb usb1: Manufacturer: Linux 4.19.75-v7l+ xhci-hcd
435[ 0.457336] usb usb1: SerialNumber: 0000:01:00.0
436[ 0.458509] hub 1-0:1.0: USB hub found
437[ 0.459248] hub 1-0:1.0: 1 port detected
438[ 0.460351] xhci_hcd 0000:01:00.0: xHCI Host Controller
439[ 0.461019] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
440[ 0.462326] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
441[ 0.463378] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
442[ 0.464707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
443[ 0.466086] usb usb2: Product: xHCI Host Controller
444[ 0.466790] usb usb2: Manufacturer: Linux 4.19.75-v7l+ xhci-hcd
445[ 0.467488] usb usb2: SerialNumber: 0000:01:00.0
446[ 0.468656] hub 2-0:1.0: USB hub found
447[ 0.469365] hub 2-0:1.0: 4 ports detected
448[ 0.471195] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
449[ 0.497453] dwc_otg fe980000.usb: base=(ptrval)
450[ 0.698412] Core Release: 2.80a
451[ 0.699032] Setting default values for core params
452[ 0.699645] Finished setting default values for core params
453[ 0.900562] Using Buffer DMA mode
454[ 0.901154] Periodic Transfer Interrupt Enhancement - disabled
455[ 0.901775] Multiprocessor Interrupt Enhancement - disabled
456[ 0.902387] OTG VER PARAM: 0, OTG VER FLAG: 0
457[ 0.903044] Dedicated Tx FIFOs mode
458[ 0.903961] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ded34000 dma = 0x00000000ded34000 len=9024
459[ 0.905221] FIQ FSM acceleration enabled for :
460 Non-periodic Split Transactions
461 Periodic Split Transactions
462 High-Speed Isochronous Endpoints
463 Interrupt/Control Split Transaction hack enabled
464[ 0.908056] dwc_otg: Microframe scheduler enabled
465[ 0.908121] WARN::hcd_init_fiq:457: FIQ on core 1
466[ 0.908681] WARN::hcd_init_fiq:458: FIQ ASM at c07b6224 length 36
467[ 0.909240] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200
468[ 0.909815] dwc_otg fe980000.usb: DWC OTG Controller
469[ 0.910387] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
470[ 0.911503] dwc_otg fe980000.usb: irq 46, io mem 0x00000000
471[ 0.912148] Init: Port Power? op_state=1
472[ 0.912721] Init: Power Port (0)
473[ 0.913539] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
474[ 0.914674] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
475[ 0.915834] usb usb3: Product: DWC OTG Controller
476[ 0.916433] usb usb3: Manufacturer: Linux 4.19.75-v7l+ dwc_otg_hcd
477[ 0.917046] usb usb3: SerialNumber: fe980000.usb
478[ 0.918143] hub 3-0:1.0: USB hub found
479[ 0.918766] hub 3-0:1.0: 1 port detected
480[ 0.919910] dwc_otg: FIQ enabled
481[ 0.919920] dwc_otg: NAK holdoff enabled
482[ 0.919928] dwc_otg: FIQ split-transaction FSM enabled
483[ 0.919942] Module dwc_common_port init
484[ 0.920155] usbcore: registered new interface driver uas
485[ 0.920859] usbcore: registered new interface driver usb-storage
486[ 0.921594] mousedev: PS/2 mouse device common for all mice
487[ 0.923440] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
488[ 0.924266] bcm2835-cpufreq: min=600000 max=1500000
489[ 0.925480] sdhci: Secure Digital Host Controller Interface driver
490[ 0.926092] sdhci: Copyright(c) Pierre Ossman
491[ 0.927079] sdhci-pltfm: SDHCI platform and OF driver helper
492[ 0.930339] ledtrig-cpu: registered to indicate activity on CPUs
493[ 0.931101] hidraw: raw HID events driver (C) Jiri Kosina
494[ 0.931904] usbcore: registered new interface driver usbhid
495[ 0.932507] usbhid: USB HID core driver
496[ 0.933868] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
497[ 0.936792] [vc_sm_connected_init]: start
498[ 0.947277] [vc_sm_connected_init]: end - returning 0
499[ 0.948971] Initializing XFRM netlink socket
500[ 0.949560] NET: Registered protocol family 17
501[ 0.950209] Key type dns_resolver registered
502[ 0.951093] Registering SWP/SWPB emulation handler
503[ 0.952264] registered taskstats version 1
504[ 0.952824] Loading compiled-in X.509 certificates
505[ 0.961068] uart-pl011 fe201000.serial: cts_event_workaround enabled
506[ 0.961756] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 35, base_baud = 0) is a PL011 rev2
507[ 0.965905] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
508[ 0.967617] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
509[ 0.969358] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
510[ 1.001670] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
511[ 1.005283] of_cfs_init
512[ 1.006085] of_cfs_init: OK
513[ 1.007302] Waiting for root device PARTUUID=4cf28e78-02...
514[ 1.051687] usb 1-1: new high-speed USB device number 2 using xhci_hcd
515[ 1.100687] mmc0: new ultra high speed DDR50 SDHC card at address 0001
516[ 1.102566] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
517[ 1.104517] mmcblk0: p1 p2
518[ 1.145387] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
519[ 1.146763] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
520[ 1.148942] devtmpfs: mounted
521[ 1.155990] Freeing unused kernel memory: 2048K
522[ 1.181899] Run /sbin/init as init process
523[ 1.234384] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
524[ 1.235757] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
525[ 1.237079] usb 1-1: Product: USB2.0 Hub
526[ 1.239553] hub 1-1:1.0: USB hub found
527[ 1.240221] random: fast init done
528[ 1.241120] hub 1-1:1.0: 4 ports detected
529[ 1.381933] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
530[ 1.414518] usb 2-1: New USB device found, idVendor=0480, idProduct=d011, bcdDevice= 3.16
531[ 1.415847] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
532[ 1.417196] usb 2-1: Product: External USB 3.0
533[ 1.417880] usb 2-1: Manufacturer: TOSHIBA
534[ 1.418544] usb 2-1: SerialNumber: 20150706016003
535[ 1.422727] usb-storage 2-1:1.0: USB Mass Storage device detected
536[ 1.424369] scsi host0: usb-storage 2-1:1.0
537[ 1.561707] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
538[ 1.580367] systemd[1]: System time before build time, advancing clock.
539[ 1.673984] NET: Registered protocol family 10
540[ 1.675882] Segment Routing with IPv6
541[ 1.705667] usb 1-1.3: New USB device found, idVendor=0480, idProduct=0103, bcdDevice= 3.15
542[ 1.707053] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
543[ 1.707067] usb 1-1.3: Product: External USB 3.0
544[ 1.709099] usb 1-1.3: Manufacturer: TOSHIBA
545[ 1.709108] usb 1-1.3: SerialNumber: 20170514006702F
546[ 1.710847] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
547[ 1.714254] systemd[1]: Detected architecture arm.
548[ 1.721140] usb-storage 1-1.3:1.0: USB Mass Storage device detected
549[ 1.722972] scsi host1: usb-storage 1-1.3:1.0
550[ 1.727799] systemd[1]: Set hostname to <raspi3>.
551[ 1.733929] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
552[ 1.852152] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
553[ 1.883815] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=32.02
554[ 1.885275] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
555[ 1.886696] usb 2-2: Product: JMS579
556[ 1.887406] usb 2-2: Manufacturer: JMicron
557[ 1.888143] usb 2-2: SerialNumber: 2019090200123
558[ 1.922244] scsi host2: uas
559[ 1.924953] scsi 2:0:0:0: Direct-Access KingDian S280 120GB 3202 PQ: 0 ANSI: 6
560[ 1.929179] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
561[ 1.930558] sd 2:0:0:0: [sda] 4096-byte physical blocks
562[ 1.931678] sd 2:0:0:0: [sda] Write Protect is off
563[ 1.932526] sd 2:0:0:0: [sda] Mode Sense: 53 00 00 08
564[ 1.933157] sd 2:0:0:0: [sda] Disabling FUA
565[ 1.933996] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
566[ 1.936609] sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
567[ 1.941604] sda: sda1
568[ 1.946056] sd 2:0:0:0: [sda] Attached SCSI disk
569[ 2.090084] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
570[ 2.092081] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
571[ 2.325829] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
572[ 2.368290] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
573[ 2.389545] systemd[1]: /lib/systemd/system/lighttpd.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/lighttpd.pid → /run/lighttpd.pid; please update the unit file accordingly.
574[ 2.470351] random: systemd: uninitialized urandom read (16 bytes read)
575[ 2.480337] random: systemd: uninitialized urandom read (16 bytes read)
576[ 2.481161] systemd[1]: Reached target System Time Synchronized.
577[ 2.483909] random: systemd: uninitialized urandom read (16 bytes read)
578[ 2.796555] scsi 1:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ: 0 ANSI: 6
579[ 2.800031] sd 1:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
580[ 2.801729] sd 1:0:0:0: [sdb] 5860533164 512-byte logical blocks: (3.00 TB/2.73 TiB)
581[ 2.802888] sd 1:0:0:0: [sdb] 4096-byte physical blocks
582[ 2.803990] sd 1:0:0:0: [sdb] Write Protect is off
583[ 2.804611] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
584[ 2.805211] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
585[ 5.600576] scsi 0:0:0:0: Direct-Access TOSHIBA External USB 3.0 5438 PQ: 0 ANSI: 6
586[ 9.815950] sdb: sdb1
587[ 9.833141] sd 1:0:0:0: [sdb] Attached SCSI disk
588[ 9.969621] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
589[ 10.275401] systemd-journald[134]: Received request to flush runtime journal from PID 1
590[ 10.537141] sd 2:0:0:0: Attached scsi generic sg0 type 0
591[ 10.538016] sd 1:0:0:0: Attached scsi generic sg1 type 0
592[ 10.538562] sd 0:0:0:0: Attached scsi generic sg2 type 0
593[ 10.603834] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
594[ 10.604341] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
595[ 10.604791] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
596[ 10.605257] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
597[ 10.648504] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
598[ 10.650625] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
599[ 10.650641] [vc_sm_connected_init]: start
600[ 10.659040] [vc_sm_connected_init]: installed successfully
601[ 10.670796] media: Linux media interface: v0.10
602[ 10.719355] videodev: Linux video capture interface: v2.00
603[ 10.770255] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
604[ 10.797062] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
605[ 10.820301] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
606[ 10.843850] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
607[ 10.843884] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
608[ 10.860582] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
609[ 10.860626] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
610[ 10.867054] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
611[ 10.867095] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
612[ 11.014390] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
613[ 11.099981] vc4_hdmi fe902000.hdmi: ASoC: Failed to create component debugfs directory
614[ 11.103724] vc4_hdmi fe902000.hdmi: vc4-hdmi-hifi <-> fe902000.hdmi mapping ok
615[ 11.120202] vc4-drm soc:gpu: bound fe902000.hdmi (ops vc4_hdmi_ops [vc4])
616[ 11.120396] vc4-drm soc:gpu: bound fe806000.vec (ops vc4_vec_ops [vc4])
617[ 11.120611] vc4-drm soc:gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
618[ 11.120711] vc4-drm soc:gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
619[ 11.121154] vc4-drm soc:gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
620[ 11.121504] vc4-drm soc:gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
621[ 11.121905] vc4-drm soc:gpu: bound fe807000.pixelvalve (ops vc4_crtc_ops [vc4])
622[ 11.121922] checking generic (3eb77000 81800) vs hw (0 ffffffffffffffff)
623[ 11.121932] fb: switching to vc4drmfb from simple
624[ 11.122156] Console: switching to colour dummy device 80x30
625[ 11.124836] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
626[ 11.124851] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
627[ 11.124860] [drm] Driver supports precise vblank timestamp query.
628[ 11.411179] sd 0:0:0:0: [sdc] 732566645 4096-byte logical blocks: (3.00 TB/2.73 TiB)
629[ 11.412436] sd 0:0:0:0: [sdc] Write Protect is off
630[ 11.412451] sd 0:0:0:0: [sdc] Mode Sense: 23 00 00 00
631[ 11.414681] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
632[ 11.454280] sd 0:0:0:0: [sdc] Attached SCSI disk
633[ 12.151692] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
634[ 12.923252] uart-pl011 fe201000.serial: no DMA platform data
635[ 12.975521] 8021q: 802.1Q VLAN Support v1.8
636[ 13.121175] cfg80211: Loading compiled-in X.509 certificates for regulatory database
637[ 13.191728] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
638[ 13.249682] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
639[ 13.436644] bcmgenet: Skipping UMAC reset
640[ 13.531984] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
641[ 13.532129] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
642[ 14.231688] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
643[ 14.551871] bcmgenet fd580000.genet eth0: Link is Down
644[ 14.985767] random: crng init done
645[ 14.985774] random: 7 urandom warning(s) missed due to ratelimiting
646[ 15.281656] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
647[ 16.311683] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
648[ 18.711969] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
649[ 18.712004] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
650[ 19.559495] Bluetooth: Core ver 2.22
651[ 19.559566] NET: Registered protocol family 31
652[ 19.559574] Bluetooth: HCI device and connection manager initialized
653[ 19.559594] Bluetooth: HCI socket layer initialized
654[ 19.559608] Bluetooth: L2CAP socket layer initialized
655[ 19.559650] Bluetooth: SCO socket layer initialized
656[ 19.573314] Bluetooth: HCI UART driver ver 2.3
657[ 19.573326] Bluetooth: HCI UART protocol H4 registered
658[ 19.573403] Bluetooth: HCI UART protocol Three-wire (H5) registered
659[ 19.573635] Bluetooth: HCI UART protocol Broadcom registered
660[ 26.711793] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:116:crtc-2] flip_done timed out
661[ 26.711999] Console: switching to colour frame buffer device 90x30
662[ 36.951774] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:116:crtc-2] flip_done timed out
663[ 47.191783] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:44:Composite-1] flip_done timed out
664[ 57.431814] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:113:plane-20] flip_done timed out
665[ 67.671776] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:116:crtc-2] flip_done timed out
666[ 67.675213] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
667[ 68.226280] tun: Universal TUN/TAP device driver, 1.6
668[ 68.322741] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
669[ 68.322748] Bluetooth: BNEP filters: protocol multicast
670[ 68.322758] Bluetooth: BNEP socket layer initialized
671[ 68.472784] Bluetooth: RFCOMM TTY layer initialized
672[ 68.472802] Bluetooth: RFCOMM socket layer initialized
673[ 68.472814] Bluetooth: RFCOMM ver 1.11
674[ 69.841708] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
675[ 70.871744] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
676[ 71.911781] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
677[ 72.951807] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
678[ 73.991833] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
679[ 75.031851] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
680[ 76.071871] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
681[ 77.111924] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
682[ 78.151942] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
683[ 79.191947] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
684[ 89.432267] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:116:crtc-2] flip_done timed out
685[ 99.672494] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:44:Composite-1] flip_done timed out
686[ 109.912713] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:113:plane-20] flip_done timed out
687[ 120.152865] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:116:crtc-2] flip_done timed out
688[ 131.433073] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
689[ 132.473140] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
690[ 133.513120] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
691[ 134.553141] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
692[ 135.593166] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
693[ 146.793444] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
694[ 147.833457] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
695[ 148.873476] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
696[ 149.913493] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
697[ 150.953519] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
698[ 162.153784] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
699[ 163.193727] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
700[ 164.233745] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
701[ 165.273759] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
702[ 166.313775] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
703[ 177.513940] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
704[ 178.553988] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
705[ 179.593971] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
706[ 180.634026] i2c-bcm2835 fe805000.i2c: i2c transfer timed out
707[ 181.674050] i2c-bcm2835 fe805000.i2c: i2c transfer timed out