5r3hYvsY

1[ 0.000000]@0 Initializing cgroup subsys cpuset [ 0.000000]@0 Initializing cgroup subsys cpu [ 0.000000]@0 Initializing cgroup subsys cpuacct [ 0.000000]@0 Linux version 3.18.36-cyanogenmod-g4907980 (dianlujitao@dianlujitao-linux) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Jun 29 02:04:33 CST 2016 [ 0.000000]@0 CPU: AArch64 Processor [511f2112] revision 2 [ 0.000000]@0 Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP [ 0.000000]@0 efi: Getting EFI parameters from FDT: [ 0.000000]@0 efi: UEFI not found. [ 0.000000]@0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB [ 0.000000]@0 Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB [ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB [ 0.000000]@0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool [ 0.000000]@0 Removed memory: created DMA memory pool at 0x000000008ea00000, size 43 MiB [ 0.000000]@0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool [ 0.000000]@0 Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ffb00000, size 4 MiB [ 0.000000]@0 Reserved memory: incorrect alignment of CMA region [ 0.000000]@0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB [ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB [ 0.000000]@0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool [ 0.000000]@0 Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB [ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB [ 0.000000]@0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool [ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB [ 0.000000]@0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool [ 0.000000]@0 Reserved memory: created DMA memory pool at 0x0000000083400000, size 0 MiB [ 0.000000]@0 Reserved memory: initialized node dfps_data_mem@83400000, compatible id shared-dma-pool [ 0.000000]@0 cma: Reserved 32 MiB at 0x00000000f6800000 [ 0.000000]@0 psci: probing for conduit method from DT. [ 0.000000]@0 psci: PSCIv1.0 detected in firmware. [ 0.000000]@0 psci: Using standard PSCI v0.2 function IDs [ 0.000000]@0 psci: Initializing psco_cpu_init [ 0.000000]@0 psci: Initializing psco_cpu_init [ 0.000000]@0 psci: Initializing psco_cpu_init [ 0.000000]@0 PERCPU: Embedded 12 pages/cpu @ffffffc17d726000 s16640 r0 d32512 u49152 [ 0.000000]@0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490909 [ 0.000000]@0 Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.selinux=permissive androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=logging androidboot.serialno=b4a60fe2 gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi androidboot.startupmode=pon1 androidboot.mode=recovery androidboot.ftm_mode=ftm_recovery androidboot.project_name=15801 androidboot.selinux=permissive androidboot.rf_version=11 androidboot.hw_version=16 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001580106909032500002083 androidboot.enable_dm_verity=1 androidboot.secboot=enabled [ 0.000000]@0 PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000]@0 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000]@0 Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000]@0 Memory: 5681380K/6058300K available (12814K kernel code, 1454K rwdata, 5652K rodata, 312K init, 3358K bss, 376920K reserved) [ 0.000000]@0 Virtual kernel memory layout: vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbdc0000000 - 0xffffffbdc5f65400 ( 95 MB actual) PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB) fixed : 0xffffffbffbdfe000 - 0xffffffbffbdff000 ( 4 KB) modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB) .init : 0xffffffc00128a000 - 0xffffffc0012d8000 ( 312 KB) .text : 0xffffffc000080000 - 0xffffffc0012898f4 ( 18471 KB) .data : 0xffffffc0012e2000 - 0xffffffc00144da80 ( 1455 KB) [ 0.000000]@0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000]@0 HMP scheduling enabled. [ 0.000000]@0 Preemptible hierarchical RCU implementation. [ 0.000000]@0 	RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000]@0 	Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000]@0 NR_IRQS:64 nr_irqs:64 0 [ 0.000000]@0 CPU0: found redistributor 0 region 0:0x0000000009c00000 [ 0.000000]@0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent [ 0.000000]@0 MPM 1 irq mapping errored -517 [ 0.000000]@0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000]@0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns [ 0.000016]@0 Switched to clocksource arch_sys_counter [ 0.000651]@0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000665]@0 pid_max: default: 32768 minimum: 301 [ 0.000728]@0 Security Framework initialized [ 0.000742]@0 SELinux: Initializing. [ 0.000799]@0 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000810]@0 Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001273]@0 Initializing cgroup subsys freezer [ 0.001291]@0 Initializing cgroup subsys bfqio [ 0.001537]@0 /cpus/cpu@0: Unknown CPU type [ 0.001545]@0 /cpus/cpu@1: Unknown CPU type [ 0.001552]@0 /cpus/cpu@100: Unknown CPU type [ 0.001560]@0 /cpus/cpu@101: Unknown CPU type [ 0.001580]@0 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available [ 0.001601]@0 EFI services will not be available. [ 0.009289]@0 NOHZ: local_softirq_pending 02 [ 0.011096]@0 MSM Memory Dump base table set up [ 0.011117]@0 MSM Memory Dump apps data table set up [ 0.016206]@0 clock-cpu-8996: configuring clocks for the perf cluster [ 0.016359]@0 cpu_clock_8996_early_init: finished CPU clock configuration [ 0.018355]@1 CPU1: found redistributor 1 region 0:0x0000000009c40000 [ 0.018477]@0 _cpu_up by swapper/0[1] [ 0.020297]@2 CPU2: found redistributor 100 region 0:0x0000000009c80000 [ 0.020490]@0 _cpu_up by swapper/0[1] [ 0.022090]@3 CPU3: found redistributor 101 region 0:0x0000000009cc0000 [ 0.022192]@0 _cpu_up by swapper/0[1] [ 0.022203]@0 Brought up 4 CPUs [ 0.022210]@0 SMP: Total of 4 processors activated. [ 0.027932]@0 pinctrl core: initialized pinctrl subsystem [ 0.028297]@0 regulator-dummy: no parameters [ 0.082927]@0 NET: Registered protocol family 16 [ 0.120060]@2 cpuidle: using governor ladder [ 0.160057]@2 cpuidle: using governor menu [ 0.180070]@2 cpuidle: using governor qcom [ 0.180892]@2 vdso: 2 pages (1 code @ ffffffc0012e9000, 1 data @ ffffffc0012e8000) [ 0.181325]@2 software IO TLB [mem 0xf6400000-0xf6800000] (4MB) mapped at [ffffffc0b6400000-ffffffc0b67fffff] [ 0.182016]@2 DMA: preallocated 256 KiB pool for atomic allocations [ 0.182248]@2 msm_smem_init: unable to create logging context [ 0.182282]@2 msm_smd_init: unable to create SMD logging context [ 0.182289]@2 msm_smd_init: unable to create SMSM logging context [ 0.182492]@2 <CORE> glink_init: unable to create log context [ 0.182718]@2 <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans] [ 0.182854]@2 <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans] [ 0.182980]@2 <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans] [ 0.183109]@2 <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans] [ 0.183243]@2 <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans] [ 0.183920]@2 Failed to create IPC log0 [ 0.183927]@2 Failed to create IPC log1 [ 0.183932]@2 Failed to create IPC log2 [ 0.183937]@2 Failed to create IPC log3 [ 0.183942]@2 Failed to create IPC log4 [ 0.184134]@2 kernel boot_mode = normal[0] [ 0.185467]@2 platform 994400.qcom,mdss_dsi_pll: assigned reserved memory node dfps_data_mem@83400000 [ 0.194174]@2 qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch [ 0.194971]@2 sps:sps is ready. [ 0.195440]@2 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe [ 0.196028]@2 i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe [ 0.196259]@2 i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe [ 0.196488]@2 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe [ 0.196798]@2 irq: no irq domain found for /soc/pinctrl@01010000 ! [ 0.198267]@2 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed [ 0.218674]@2 smd_channel_probe_now: allocation table not initialized [ 0.218921]@2 smd_channel_probe_now: allocation table not initialized [ 0.219160]@2 smd_channel_probe_now: allocation table not initialized [ 0.219399]@2 smd_channel_probe_now: allocation table not initialized [ 0.219608]@2 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present [ 0.219834]@2 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized [ 0.220515]@2 msm_rpm_dev_probe: APSS-RPM communication over GLINK [ 0.227986]@1 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000 [ 0.229669]@1 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts [ 0.233914]@1 pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle [ 0.234547]@1 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000 [ 0.235039]@1 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000 [ 0.235707]@1 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000 [ 0.236298]@1 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000 [ 0.238899]@1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues [ 0.238925]@1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues [ 0.238944]@1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues [ 0.238957]@1 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues [ 0.239057]@1 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe [ 0.239064]@1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. [ 0.239073]@1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues [ 0.239082]@1 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 [ 0.244440]@2 <CORE> glink_core_register_transport: unable to create log context for [mpss:smem] [ 0.245111]@2 <CORE> glink_core_register_transport: unable to create log context for [lpass:smem] [ 0.245754]@2 <CORE> glink_core_register_transport: unable to create log context for [dsps:smem] [ 0.246254]@2 <CORE> glink_core_register_transport: unable to create log context for [rpm:smem] [ 0.246518]@0 smd_channel_probe_now: allocation table not initialized [ 0.246597]@1 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests [ 0.247251]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts [ 0.247339]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts [ 0.247485]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts [ 0.247717]@2 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts [ 0.249497]@2 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV [ 0.249834]@2 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV [ 0.250194]@2 apcc_l3_mem_acc_corner: 0 <--> 0 mV [ 0.250511]@2 gfx_mem_acc_corner: 0 <--> 0 mV [ 0.250912]@2 kryo0-retention: 468 <--> 892 mV at 520 mV [ 0.251105]@2 kryo0: 468 <--> 892 mV at 754 mV [ 0.251242]@2 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0 [ 0.251537]@2 kryo1-retention: 468 <--> 892 mV at 520 mV [ 0.251727]@2 kryo1: 468 <--> 892 mV at 754 mV [ 0.251864]@2 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1 [ 0.255830]@2 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000 [ 0.257054]@2 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 [ 0.274894]@1 __of_mpm_init(): MPM driver mapping exists [ 0.276284]@1 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2 [ 0.276404]@1 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517 [ 0.276417]@1 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517 [ 0.279782]@1 console [pstore0] enabled [ 0.279921]@1 pstore: Registered ramoops as persistent store backend [ 0.279932]@1 ramoops: attached 0x200000@0xac000000, ecc: 0/0 [ 0.280129]@1 XCB bootloader_log_probe [ 0.280594]@1 bootloader_log! [ 0.281743]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 [ 0.281820]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517 [ 0.281835]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517 [ 0.282096]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2 [ 0.282148]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517 [ 0.282161]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517 [ 0.282431]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 [ 0.282481]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517 [ 0.282494]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517 [ 0.282720]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 [ 0.282770]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517 [ 0.282782]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517 [ 0.282927]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed [ 0.283712]@3 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.284148]@3 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.284508]@3 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle [ 0.284932]@3 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.285290]@3 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle [ 0.285710]@3 pm8994_s3: 1300 mV normal idle [ 0.286116]@3 pm8994_s4: 1800 mV normal idle [ 0.286536]@3 pm8994_s5: 2150 mV normal idle [ 0.286938]@3 pm8994_s7: 800 mV normal idle [ 0.287351]@3 pm8994_l1: 1000 mV normal idle [ 0.287769]@3 pm8994_l2: 1250 mV normal idle [ 0.288388]@3 pm8994_l3: 1100 mV normal idle [ 0.288805]@3 pm8994_l4: 1225 mV normal idle [ 0.289217]@3 pm8994_l6: 1200 mV normal idle [ 0.289629]@3 pm8994_l8: 1800 mV normal idle [ 0.290085]@3 pm8994_l9: 1800 mV normal idle [ 0.290501]@3 pm8994_l10: 1800 mV normal idle [ 0.290906]@3 pm8994_l11: 1150 mV normal idle [ 0.291333]@3 pm8994_l12: 1800 mV normal idle [ 0.292060]@3 pm8994_l13: 29500 <--> 2950 mV at 2950 mV normal idle [ 0.292475]@3 pm8994_l15: 1800 mV normal idle [ 0.292881]@3 pm8994_l16: 2700 mV normal idle [ 0.293302]@3 pm8994_l17: 2600 mV normal idle [ 0.293714]@3 pm8994_l18: 3300 mV normal idle [ 0.294124]@3 pm8994_l19: 3000 mV normal idle [ 0.294540]@3 pm8994_l20: 2950 mV normal idle [ 0.294971]@3 pm8994_l21: 2950 mV normal idle [ 0.295378]@3 pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle [ 0.295796]@3 pm8994_l23: 2800 mV normal idle [ 0.296210]@3 pm8994_l24: 3075 mV normal idle [ 0.296637]@3 pm8994_l25: 1200 mV normal idle [ 0.297275]@3 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.297647]@3 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle [ 0.298060]@3 pm8994_l27: 1200 mV normal idle [ 0.298483]@3 pm8994_l28: 925 mV normal idle [ 0.299091]@3 pm8994_l29: 2800 mV normal idle [ 0.299505]@3 pm8994_l30: 1800 mV normal idle [ 0.299927]@3 pm8994_l32: 1800 mV normal idle [ 0.300368]@3 pm8994_lvs1: no parameters [ 0.300738]@3 pm8994_lvs2: no parameters [ 0.301117]@3 pmi8994_s1: 1025 mV normal idle [ 0.301509]@3 pmi8994_boost_5v: no parameters [ 0.301597]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent [ 0.301698]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517 [ 0.301973]@3 pmi8994_boost_pin_ctrl: no parameters [ 0.302017]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent [ 0.302111]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517 [ 0.302426]@3 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle [ 0.302766]@3 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle [ 0.302978]@3 pm8994_s11_avs_limit: 470 <--> 1140 mV [ 0.303091]@3 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us [ 0.303868]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues [ 0.303890]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues [ 0.303902]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized [ 0.303917]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues [ 0.303933]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues [ 0.304223]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe [ 0.304237]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. [ 0.304248]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues [ 0.304259]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 [ 0.304872]@3 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 [ 0.305310]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2 [ 0.305373]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517 [ 0.305387]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517 [ 0.305685]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 [ 0.305736]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517 [ 0.305749]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517 [ 0.305989]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2 [ 0.306040]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517 [ 0.306052]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517 [ 0.306305]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 [ 0.306353]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517 [ 0.306365]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517 [ 0.306585]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 [ 0.306634]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517 [ 0.306645]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517 [ 0.306858]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed [ 0.325997]@2 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks. [ 0.326975]@2 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0 [ 0.326995]@2 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0 [ 0.327008]@2 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0 [ 0.327212]@2 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1 [ 0.327225]@2 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1 [ 0.327237]@2 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1 [ 0.327455]@2 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp [ 0.327468]@2 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp [ 0.327478]@2 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp [ 0.336709]@2 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks. [ 0.338354]@2 pmi8994_boost_5v: no parameters [ 0.338434]@2 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent [ 0.338534]@2 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517 [ 0.338736]@2 pmi8994_boost_pin_ctrl: no parameters [ 0.338778]@2 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent [ 0.338866]@2 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517 [ 0.339576]@2 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues [ 0.339595]@2 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues [ 0.339607]@2 msm_thermal:sensor_mgr_init_threshold threshold id already initialized [ 0.339621]@2 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues [ 0.339636]@2 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues [ 0.339794]@2 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe [ 0.339805]@2 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. [ 0.339816]@2 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues [ 0.339827]@2 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 [ 0.340402]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0 [ 0.340416]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6 [ 0.340425]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N [ 0.340436]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none [ 0.340445]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none [ 0.340456]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4 [ 0.340625]@2 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV [ 0.340788]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 575000 uV [ 0.340799]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV [ 0.340809]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 785000 uV [ 0.340818]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 930000 uV [ 0.340901]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 326 [ 0.340910]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 482, quot_offset[ 7]= 115 [ 0.340920]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 717, quot_offset[ 7]= 235 [ 0.340930]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 969, quot_offset[ 7]= 250 [ 0.341055]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0 [ 0.341065]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6 [ 0.341074]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N [ 0.341083]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none [ 0.341092]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none [ 0.341103]@2 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4 [ 0.341226]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 575000 uV [ 0.341235]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV [ 0.341244]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 785000 uV [ 0.341252]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 930000 uV [ 0.341294]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 326 [ 0.341303]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 482, quot_offset[ 7]= 115 [ 0.341313]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 717, quot_offset[ 7]= 235 [ 0.341321]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 969, quot_offset[ 7]= 250 [ 0.341424]@2 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0 [ 0.341434]@2 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6 [ 0.341444]@2 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N [ 0.341453]@2 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none [ 0.341462]@2 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none [ 0.341473]@2 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4 [ 0.341648]@2 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV [ 0.341844]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV [ 0.341856]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 645000 uV [ 0.341865]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV [ 0.341873]@2 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 980000 uV [ 0.341980]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 324 [ 0.341990]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 441, quot_offset[ 7]= 75 [ 0.342000]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 599, quot_offset[ 7]= 155 [ 0.342010]@2 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1047, quot_offset[ 7]= 445 [ 0.342455]@2 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV [ 0.342800]@2 apc0_cbf_corner: 0 <--> 0 mV at 0 mV [ 0.345664]@3 cpr3_regulator_measure_aging: apcc: average quotient delta=11 (count=10) [ 0.345691]@3 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=937 uV [ 0.345993]@3 apc1_corner: 0 <--> 0 mV at 0 mV [ 0.347514]@2 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4 [ 0.347531]@2 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none [ 0.347789]@2 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV [ 0.347800]@2 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV [ 0.347809]@2 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 815000 uV [ 0.347818]@2 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 915000 uV [ 0.347977]@2 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop gfx_corner: 0 <--> 0 mV at 0 mV [ 0.349390]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2 [ 0.349473]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 [ 0.350318]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2 [ 0.351088]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 [ 0.351904]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 [ 0.352705]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0 [ 0.355431]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu0 [ 0.355478]@3 clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on cpu0 [ 0.355498]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu1 [ 0.355531]@3 clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on cpu1 [ 0.355549]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2 [ 0.355603]@3 clock-cpu-8996: set OPP pair (2150400000 Hz, 965000 uv) on cpu2 [ 0.355623]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3 [ 0.355674]@3 clock-cpu-8996: set OPP pair (2150400000 Hz, 965000 uv) on cpu3 [ 0.355790]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 620000 uv) on soc:qcom,m4m [ 0.355831]@3 clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on soc:qcom,m4m [ 0.356155]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0 [ 0.356487]@3 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0 [ 0.356513]@3 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 915000 uV) on b00000.qcom,kgsl-3d0 [ 0.357895]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks. [ 0.358115]@3 pmi8994_boost_5v: no parameters [ 0.358179]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent [ 0.358281]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517 [ 0.358472]@3 pmi8994_boost_pin_ctrl: no parameters [ 0.358514]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent [ 0.358605]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517 [ 0.359342]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues [ 0.359364]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues [ 0.359377]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized [ 0.359391]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues [ 0.359407]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues [ 0.359638]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19 [ 0.359654]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 [ 0.359665]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 [ 0.359684]@3 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues [ 0.360631]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19 [ 0.360647]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 [ 0.360658]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 [ 0.360852]@1 pmi8994_boost_5v: no parameters [ 0.360963]@1 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent [ 0.361068]@1 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517 [ 0.361296]@1 pmi8994_boost_pin_ctrl: no parameters [ 0.361370]@1 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent [ 0.361464]@1 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517 [ 0.413915]@3 KPI: Bootloader start count = 33642 [ 0.413931]@3 KPI: Bootloader end count = 251311 [ 0.413939]@3 KPI: Bootloader display count = 233874 [ 0.413947]@3 KPI: Bootloader load kernel count = 2325 [ 0.413957]@3 KPI: Kernel MPM timestamp = 274893 [ 0.413965]@3 KPI: Kernel MPM Clock frequency = 32768 [ 0.413979]@3 socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1139637693 num_pmics=2 [ 0.414012]@3 init_project_info: project_name: 15801 hw_version: 16 rf_v1: 11 rf_v2: 1: rf_v3: 0 [ 0.414024]@3 init_project_info: aboard_version: 1 [ 0.414885]@3 op_rf_cable_probe: ftm_mode FOUND! use 1 always [ 0.414902]@3 modify_rf_cable_smem_info: rf_cable: 1 [ 0.414910]@3 op_rf_cable_probe: probe ok! [ 0.415264]@3 gdsc_mmagic_bimc: no parameters [ 0.415865]@3 rome_vreg: no parameters [ 0.416385]@3 vgaarb: loaded [ 0.417669]@3 SCSI subsystem initialized [ 0.418582]@3 usbcore: registered new interface driver usbfs [ 0.418625]@3 usbcore: registered new interface driver hub [ 0.418770]@3 usbcore: registered new device driver usb [ 0.419114]@3 soc:usb_nop_phy supply vcc not found, using dummy regulator [ 0.419712]@3 media: Linux media interface: v0.10 [ 0.419758]@3 Linux video capture interface: v2.00 [ 0.460769]@3 cpufreq: driver msm up and running [ 0.461423]@3 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region [ 0.461531]@3 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region [ 0.461747]@3 ION heap system created [ 0.461838]@3 ION heap kmalloc created [ 0.461846]@3 ION heap adsp created at 0x00000000f6800000 with size 2000000 [ 0.461855]@3 ION heap qsecom created at 0x00000000fe400000 with size 1400000 [ 0.461862]@3 ION heap secure_display created at 0x00000000f8800000 with size 5c00000 [ 0.461870]@3 ION heap secure_heap created [ 0.462542]@3 msm_bus_fabric_init_driver [ 0.465068]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517 [ 0.465081]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517 [ 0.467804]@3 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517 [ 0.468239]@3 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517 [ 0.473665]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517 [ 0.473678]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517 [ 0.473687]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517 [ 0.473795]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.473816]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.473834]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.473853]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.473871]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.473889]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.473907]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 [ 0.475197]@3 qcom,qpnp-power-on qpnp-power-on-ffffffc175cf1800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot [ 0.475217]@3 qcom,qpnp-power-on qpnp-power-on-ffffffc175cf1800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) [ 0.475331]@3 input: qpnp_pon as /devices/virtual/input/input0 [ 0.475821]@3 pon_spare_reg: no parameters [ 0.475872]@3 qcom,qpnp-power-on qpnp-power-on-ffffffc175cf3c00: No PON config. specified [ 0.475927]@3 qcom,qpnp-power-on qpnp-power-on-ffffffc175cf3c00: PMIC@SID2 Power-on reason: Triggered from Hard Reset and 'cold' boot [ 0.475942]@3 qcom,qpnp-power-on qpnp-power-on-ffffffc175cf3c00: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) [ 0.476093]@3 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2 [ 0.476181]@3 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0 [ 0.477168]@3 ipa ipa_uc_state_check:291 uC interface not initialized [ 0.477180]@3 ipa ipa_sps_irq_control_all:932 EP (2) not allocated. [ 0.477185]@3 ipa ipa_sps_irq_control_all:932 EP (5) not allocated. [ 0.478836]@3 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000684000 sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000684000 sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000684000 sps:BAM 0x0000000000684000 is registered.ipa ipa_uc_state_check:291 uC interface not initialized [ 0.479752]@3 sps:BAM 0x0000000000684000 (va:0xffffff8002140000) enabled: ver:0x27, number of pipes:20 [ 0.481167]@3 ipa ipa_uc_state_check:291 uC interface not initialized [ 0.489167]@3 ipa ipa_uc_state_check:291 uC interface not initialized [ 0.490938]@3 IPA driver initialization was successful. [ 0.492180]@3 gdsc_mmagic_video: no parameters [ 0.492403]@3 gdsc_mmagic_mdss: no parameters [ 0.492558]@3 gdsc_mmagic_camss: no parameters [ 0.492779]@3 gdsc_venus: no parameters [ 0.492799]@3 gdsc_venus: supplied by gdsc_mmagic_video [ 0.492965]@3 gdsc_venus_core0: fast normal [ 0.493137]@3 gdsc_venus_core1: fast normal [ 0.493301]@3 gdsc_camss_top: no parameters [ 0.493323]@3 gdsc_camss_top: supplied by gdsc_mmagic_camss [ 0.493516]@3 gdsc_vfe0: no parameters [ 0.493533]@3 gdsc_vfe0: supplied by gdsc_camss_top [ 0.493692]@3 gdsc_vfe1: no parameters [ 0.493709]@3 gdsc_vfe1: supplied by gdsc_camss_top [ 0.493906]@3 gdsc_mdss: no parameters [ 0.493925]@3 gdsc_mdss: supplied by gdsc_mmagic_mdss [ 0.494189]@3 gdsc_jpeg: no parameters [ 0.494207]@3 gdsc_jpeg: supplied by gdsc_camss_top [ 0.494373]@3 gdsc_cpp: no parameters [ 0.494389]@3 gdsc_cpp: supplied by gdsc_camss_top [ 0.494566]@3 gdsc_pcie_0: no parameters [ 0.494702]@3 gdsc_pcie_1: no parameters [ 0.494863]@3 gdsc_pcie_2: no parameters [ 0.495012]@3 gdsc_usb30: no parameters [ 0.495167]@3 gdsc_ufs: no parameters [ 0.495339]@3 gdsc_fd: no parameters [ 0.495355]@3 gdsc_fd: supplied by gdsc_camss_top [ 0.495532]@3 gdsc_gpu: no parameters [ 0.495698]@3 gdsc_gpu_gx: no parameters [ 0.496042]@3 gdsc_gpu_gx: supplied by gfx_corner [ 0.496235]@3 gdsc_hlos1_vote_aggre0_noc: no parameters [ 0.496375]@3 gdsc_hlos1_vote_lpass_adsp: no parameters [ 0.496532]@3 gdsc_hlos1_vote_lpass_core: no parameters [ 0.496680]@3 gdsc_aggre0_noc: no parameters [ 0.498832]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.498857]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.500892]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully [ 0.500974]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL [ 0.500986]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled [ 0.502080]@3 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock [ 0.502595]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully [ 0.515676]@3 arm-smmu d80000.arm,smmu-jpeg: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts. [ 0.523405]@3 arm-smmu b40000.arm,smmu-kgsl: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. [ 0.531804]@3 arm-smmu da0000.arm,smmu-vfe: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. [ 0.540473]@3 arm-smmu d40000.arm,smmu-venus: found 11 context interrupt(s) but have 7 context banks. assuming 7 context interrupts. [ 0.549099]@3 arm-smmu d00000.arm,smmu-mdp: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. [ 0.557571]@3 arm-smmu d20000.arm,smmu-rot: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. [ 0.566424]@3 arm-smmu d60000.arm,smmu-cpp_fd: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts. [ 0.574146]@3 arm-smmu 1600000.arm,smmu-lpass_q6: found 16 context interrupt(s) but have 12 context banks. assuming 12 context interrupts. [ 0.582101]@3 arm-smmu 1640000.arm,smmu-anoc0: found 6 context interrupt(s) but have 7 context banks. assuming 7 context interrupts. [ 0.589091]@3 arm-smmu 1660000.arm,smmu-anoc1: found 8 context interrupt(s) but have 4 context banks. assuming 4 context interrupts. [ 0.596216]@3 arm-smmu 1680000.arm,smmu-anoc2: found 12 context interrupt(s) but have 8 context banks. assuming 8 context interrupts. [ 0.599102]@3 Advanced Linux Sound Architecture Driver Initialized. [ 0.599753]@3 Bluetooth: ffffffc1764bbd20 NET: Registered protocol family 31 [ 0.599850]@3 Bluetooth: ffffffc1764bbd20 Bluetooth: ffffffc1764bbd00Bluetooth: ffffffc1764bbcd0 Bluetooth: ffffffc1764bbce0cfg80211: Calling CRDA to update world regulatory domain [ 0.600411]@3 cfg80211: World regulatory domain updated: [ 0.600421]@3 cfg80211: DFS Master region: unset cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 0.600447]@3 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600457]@3 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600466]@3 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600474]@3 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600482]@3 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600490]@3 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600498]@3 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 0.600506]@3 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 0.600706]@3 pcie:pcie_init. [ 0.600717]@3 pcie_init: unable to create IPC log context for pcie0-short [ 0.600725]@3 pcie_init: unable to create IPC log context for pcie0-long [ 0.600733]@3 pcie_init: unable to create IPC log context for pcie0-dump [ 0.600742]@3 pcie_init: unable to create IPC log context for pcie1-short [ 0.600749]@3 pcie_init: unable to create IPC log context for pcie1-long [ 0.600757]@3 pcie_init: unable to create IPC log context for pcie1-dump [ 0.600765]@3 pcie_init: unable to create IPC log context for pcie2-short [ 0.600773]@3 pcie_init: unable to create IPC log context for pcie2-long [ 0.600781]@3 pcie_init: unable to create IPC log context for pcie2-dump [ 0.602430]@3 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator [ 0.604943]@3 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource. [ 0.607563]@1 pmi8994_boost_5v: no parameters [ 0.607853]@1 pmi8994_boost_5v: supplied by pon_spare_reg [ 0.608367]@1 pmi8994_boost_pin_ctrl: no parameters [ 0.608554]@1 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg [ 0.609225]@3 Switched to clocksource arch_sys_counter [ 0.609905]@3 bcl_peripheral:bcl_perph_init BCL Initialized [ 0.611955]@3 NET: Registered protocol family 2 [ 0.612544]@3 TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.612695]@3 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.613643]@3 TCP: Hash tables configured (established 65536 bind 65536) [ 0.613822]@3 TCP: reno registered [ 0.613860]@3 UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.613950]@3 UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.614372]@3 NET: Registered protocol family 1 [ 0.614901]@3 RPC: Registered named UNIX socket transport module. [ 0.614915]@3 RPC: Registered udp transport module. [ 0.614923]@3 RPC: Registered tcp transport module. [ 0.614932]@3 RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.615372]@3 Trying to unpack rootfs image as initramfs... [ 0.660459]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:63 [ 0.660520]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:63 [ 0.660532]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:63 [ 0.660541]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:63 [ 0.760425]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 960000. Temp:61 [ 0.760488]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 960000. Temp:61 [ 0.760499]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1555200. Temp:61 [ 0.760509]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1555200. Temp:61 [ 0.857513]@3 Freeing initrd memory: 9700K (ffffffc002200000 - ffffffc002b79000) [ 0.859492]@3 kryo perfevents: CPU pmu for kryo-pmuv3 detected [ 0.866080]@3 futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.866232]@3 audit: initializing netlink subsys (disabled) [ 0.866341]@3 audit: type=2000 audit(0.859:1): initialized [ 0.866926]@3 vmscan: error setting kswapd cpu affinity mask [ 0.872496]@3 fuse init (API version 7.23) [ 0.872972]@3 msgmni has been set to 11403 [ 0.875586]@3 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.875617]@3 io scheduler noop registered (default) [ 0.875742]@3 io scheduler cfq registered [ 0.875817]@3 io scheduler bfq registered [ 0.875826]@3 BFQ I/O-scheduler version: v7r7 mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found [ 0.888170]@3 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree [ 0.888253]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:0 num:0 ndx:0x1 prio:0 [ 0.888266]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:4 num:1 ndx:0x2 prio:1 [ 0.888276]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:8 num:2 ndx:0x4 prio:2 [ 0.888290]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:1 num:3 ndx:0x8 prio:4 [ 0.888300]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:5 num:4 ndx:0x10 prio:5 [ 0.888310]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:9 num:5 ndx:0x20 prio:6 [ 0.888322]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:2 num:6 ndx:0x40 prio:8 [ 0.888331]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:10 num:7 ndx:0x80 prio:9 [ 0.888341]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:12 num:8 ndx:0x100 prio:3 [ 0.888351]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:13 num:9 ndx:0x200 prio:7 [ 0.888370]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read [ 0.888408]@3 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:10 ndx:0x400 prio:0 [ 0.888418]@3 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:11 ndx:0x800 prio:1 [ 0.888427]@3 mdss_mdp_parse_dt_pipe: dedicated vp cursors detected, num=2 [ 0.888506]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read [ 0.888526]@3 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree [ 0.888574]@3 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree [ 0.889478]@3 mdss_mdp_irq_clk_register: unable to get clk: lut_clk [ 0.891351]@3 xlog_status: enable:0, panic:0, dump:2 [ 0.892732]@3 mdss_smmu_attach_v2: iommu device not attached for domain[0] [ 0.892747]@3 mdss_mdp_clk_ctrl: IOMMU attach failed [ 0.892757]@3 No change in context(0==0), skip [ 0.894366]@3 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on [ 0.899430]@3 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! [ 0.899600]@3 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful! [ 0.899727]@3 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! [ 0.899840]@3 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful! [ 0.902971]@3 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 [ 0.903399]@3 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd [ 0.903419]@3 mdss_dsi_panel_init: Panel Name = samsung s6e3fa3 1080p cmd mode dsi panel [ 0.903535]@3 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd" (ffffffc1764bb398) [ 0.903554]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command [ 0.903641]@3 mdss_dsi_parse_panel_features: partial_update_enabled=0 [ 0.903652]@3 mdss_dsi_parse_panel_features: ulps feature disabled [ 0.903662]@3 mdss_dsi_parse_panel_features: ulps during suspend feature disabled mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 [ 0.903690]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command [ 0.903724]@3 mdss_dsi_panel_init: Panel Manufacture = SAMSUNG [ 0.903731]@3 mdss_dsi_panel_init: Panel Version = S6E3FA3 [ 0.903742]@3 high brightness panel: 1 [ 0.903980]@3 mdss_dsi_parse_ctrl_params:3831 Unable to read qcom,display-id, data= (null),len=20 [ 0.904023]@3 mdss_dsi_parse_gpio_params: bklt_en gpio not specified [ 0.904260]@3 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found [ 0.904269]@3 mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed [ 0.904293]@3 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80022c2000 ctrl_size=400 phy_base=ffffff80022c4400 phy_size=588 [ 0.904476]@3 dsi_panel_device_register: Continuous splash enabled [ 0.905095]@3 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0 [ 0.908473]@3 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2 [ 0.909915]@3 mdss_dsi_status_init: DSI status check interval:5000 [ 0.910565]@3 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel [ 0.912568]@3 mdss_fb_probe: fb0: split_mode:0 left:0 right:0 [ 0.913180]@3 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully! [ 0.914019]@3 mdss_fb_probe: fb1: split_mode:0 left:0 right:0 [ 0.914108]@3 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully! [ 0.914183]@3 mdss_mdp_splash_parse_dt: splash mem child node is not present [ 0.917106]@3 glink_loopback_server_init: unable to create log context [ 0.917465]@3 msm_smp2p_init: unable to create log context [ 0.919954]@3 qmi_log_init: Unable to create QMI IPC logging for Req/Resp logging for Indications: Unable to create QMI IPC qmi_log_initl2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs [ 0.932961]@3 msm_rpm_log_probe: OK [ 0.939083]@0 smd_channel_probe_now: allocation table not initialized [ 0.944056]@3 uart_tx_gpio is not available [ 0.944076]@3 uart_rx_gpio is not available [ 0.944083]@3 uart_cts_gpio is not available [ 0.944090]@3 uart_rfr_gpio is not available [ 0.944241]@3 msm_serial_hs 7570000.uart: msm_hs_probe: error creating logging context sps: BAM device 0x0000000007544000 is not registered yet. [ 0.945000]@3 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007544000 sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007544000 sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007544000 sps:BAM 0x0000000007544000 is registered.7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is a MSM HS UART [ 0.948909]@3 msm_serial_hs module loaded [ 0.949911]@3 msm_serial_hsl_probe: detected port #0 (ttyHSL0) [ 0.951065]@3 msm_serial_hsl_init: msm_hsl_platform_driver and msm_hsl_uart_driver unregister [ 0.951103]@3 smd_tty_log_init: Unable to create IPC log diag: Failed to create IPC logging context [ 0.969113]@3 brd: module loaded [ 0.970827]@3 loop: module loaded [ 0.970965]@3 at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 0.972063]@3 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000 [ 0.972115]@3 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE QSEECOM: qseecom_probe: no-clock-support=0x1QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2 [ 0.974395]@3 i2c-core: driver [tusb320] using legacy suspend method [ 0.974409]@3 i2c-core: driver [tusb320] using legacy resume method [ 0.974466]@3 i2c-core: driver [fusb301] using legacy suspend method [ 0.974473]@3 i2c-core: driver [fusb301] using legacy resume method [ 0.974527]@3 i2c-core: driver [ptn5150] using legacy suspend method [ 0.974534]@3 i2c-core: driver [ptn5150] using legacy resume method [ 0.976311]@3 gpio_dev_probe [ 0.976358]@3 i= 1 gpio=: 97 [ 0.976394]@3 i= 2 gpio=: 98 [ 0.976442]@3 i= 3 gpio=: 100 [ 0.976505]@3 i= 4 gpio=: 115 [ 0.976582]@3 i= 5 gpio=: 127 [ 0.976673]@3 i= 6 gpio=: 133 [ 0.976778]@3 i= 7 gpio=: 136 [ 0.976813]@3 gpio_pinctrl_init [ 0.977265]@3 gpio_dev_probe ok! [ 0.977577]@3 i2c-core: driver [tabla-i2c-core] using legacy suspend method [ 0.977587]@3 i2c-core: driver [tabla-i2c-core] using legacy resume method [ 0.977658]@3 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method [ 0.977666]@3 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method [ 0.977732]@3 i2c-core: driver [tasha-i2c-core] using legacy suspend method [ 0.977740]@3 i2c-core: driver [tasha-i2c-core] using legacy resume method [ 0.979200]@3 Loading pn544 driver [ 0.979283]@3 Enter pn544_probe !!! [ 0.979460]@3 pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0 [ 0.979591]@3 successfully got regulator_s4 [ 0.979821]@3 successfully set regulator voltage_s4 [ 0.979832]@3 get BBCLK2!!! [ 0.979866]@3 clk_prepare_enable. ret = 0 [ 0.980121]@3 pn544_probe : requesting IRQ 297 [ 0.980260]@3 [NXP-P61] : Entry : p61_dev_init [ 0.981520]@3 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000 [ 0.981538]@3 qce 660000.qcedev: CE device = 0x0 , IO base, CE = 0xffffff8002840000 , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 IO base BAM = 0x (null) BAM IRQ 155 Engines Availability = 0x2011053 [ 0.981589]@3 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000644000 sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000644000 sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000644000 sps:BAM 0x0000000000644000 is registered.sps:BAM 0x0000000000644000 (va:0xffffff80036c0000) enabled: ver:0x27, number of pipes:16 [ 0.982051]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 155 [ 0.990623]@3 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000 [ 0.990650]@3 qcrypto 660000.qcrypto: CE device = 0x0 , IO base, CE = 0xffffff8003700000 , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 IO base BAM = 0x (null) BAM IRQ 155 Engines Availability = 0x2011053 [ 0.990978]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 155 [ 0.996507]@3 qcrypto 660000.qcrypto: qcrypto-ecb-aes [ 0.996652]@3 qcrypto 660000.qcrypto: qcrypto-cbc-aes [ 0.996774]@3 qcrypto 660000.qcrypto: qcrypto-ctr-aes [ 0.996871]@3 qcrypto 660000.qcrypto: qcrypto-ecb-des [ 0.996961]@3 qcrypto 660000.qcrypto: qcrypto-cbc-des [ 0.997050]@3 qcrypto 660000.qcrypto: qcrypto-ecb-3des [ 0.997148]@3 qcrypto 660000.qcrypto: qcrypto-cbc-3des [ 0.997243]@3 qcrypto 660000.qcrypto: qcrypto-xts-aes [ 0.997334]@3 qcrypto 660000.qcrypto: qcrypto-sha1 [ 0.997426]@3 qcrypto 660000.qcrypto: qcrypto-sha256 [ 0.997516]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 0.997610]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 0.997699]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 0.997790]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 0.997881]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 0.997970]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 0.998062]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha1 [ 0.998155]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha256 [ 0.998244]@3 qcrypto 660000.qcrypto: qcrypto-aes-ccm [ 0.998336]@3 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm [ 1.001186]@3 ICE IRQ = 27 [ 1.005774]@3 qcom_ice_get_pdevice: found ice device ffffffc0b55d4a00 [ 1.005801]@3 qcom_ice_get_pdevice: matching platform device ffffffc175c80c00 [ 1.006312]@3 scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0 [ 1.007033]@3 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -517 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -517 scsi host0: ufshcd [ 1.011747]@3 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002570000 [ 1.031819]@3 SCSI Media Changer driver v0.25 [ 1.035842]@3 sps:BAM 0x0000000007544000 (va:0xffffff80026c0000) enabled: ver:0x19, number of pipes:24 [ 1.036050]@3 [NXP-P61] : p61_probe chip select : 1 , bus number = 0 [ 1.036202]@3 p61_parse_dt: 34, 21 0 [ 1.036210]@3 [NXP-P61] : Entry : p61_hw_setup [ 1.036246]@3 [NXP-P61] : Exit : p61_hw_setup [ 1.036372]@3 [NXP-P61] : Entry : p61_disable_irq [ 1.036381]@3 [NXP-P61] : Exit : p61_disable_irq [ 1.036388]@3 [NXP-P61] : Exit : p61_probe [ 1.037325]@3 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.038733]@3 tun: Universal TUN/TAP device driver, 1.6 [ 1.038741]@3 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.038811]@3 PPP generic driver version 2.4.2 [ 1.038894]@3 PPP BSD Compression module registered [ 1.038904]@3 PPP Deflate Compression module registered [ 1.038944]@3 PPP MPPE Compression module registered [ 1.038956]@3 NET: Registered protocol family 24 [ 1.051588]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 1.060322]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:47 [ 1.060338]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:47 [ 1.060345]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:47 [ 1.060353]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:47 [ 1.136213]@0 PCI host bridge /soc/qcom,pcie@00600000 ranges: [ 1.136250]@0 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff] [ 1.136283]@0 IO 0x0c200000..0x0c2fffff -> 0x0c200000 [ 1.136299]@0 MEM 0x0c300000..0x0cffffff -> 0x0c300000 [ 1.136460]@0 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00 [ 1.136476]@0 pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.136488]@0 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) [ 1.136499]@0 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] [ 1.136583]@0 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs [ 1.136701]@0 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19 [ 1.136920]@0 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.137127]@0 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs [ 1.137910]@0 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs [ 1.137946]@0 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff] [ 1.137960]@0 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit] [ 1.138005]@0 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] [ 1.138182]@0 pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.138212]@0 pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff] [ 1.153553]@0 cnss: Platform driver probed successfully. [ 1.154732]@0 usbcore: registered new interface driver asix [ 1.154776]@0 usbcore: registered new interface driver ax88179_178a [ 1.154819]@0 usbcore: registered new interface driver cdc_ether [ 1.154850]@0 usbcore: registered new interface driver net1080 [ 1.154882]@0 usbcore: registered new interface driver cdc_subset [ 1.154912]@0 usbcore: registered new interface driver zaurus [ 1.155247]@1 usbcore: registered new interface driver cdc_ncm [ 1.156438]@1 msm_sharedmem: sharedmem_register_qmi: qmi init successful [ 1.158486]@2 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 1.160416]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47 [ 1.160435]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47 [ 1.160442]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47 [ 1.160449]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47 [ 1.165743]@3 msm-dwc3 6a00000.ssusb: unable to get dbm device [ 1.169059]@3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.169083]@3 ehci-pci: EHCI PCI platform driver [ 1.169150]@3 usbcore: registered new interface driver usb-storage [ 1.169172]@3 usbcore: registered new interface driver ums-alauda [ 1.169192]@3 usbcore: registered new interface driver ums-cypress [ 1.169209]@3 usbcore: registered new interface driver ums-datafab [ 1.169226]@3 usbcore: registered new interface driver ums-freecom [ 1.169244]@3 usbcore: registered new interface driver ums-isd200 [ 1.169262]@3 usbcore: registered new interface driver ums-jumpshot [ 1.169284]@3 usbcore: registered new interface driver ums-karma [ 1.169301]@3 usbcore: registered new interface driver ums-sddr09 [ 1.169318]@3 usbcore: registered new interface driver ums-sddr55 [ 1.169335]@3 usbcore: registered new interface driver ums-usbat [ 1.169412]@3 usbcore: registered new interface driver usbserial [ 1.169432]@3 usbcore: registered new interface driver usb_ehset_test [ 1.170147]@3 gbridge_init: gbridge_init successs. [ 1.170259]@3 mousedev: PS/2 mouse device common for all mice [ 1.170383]@3 usbcore: registered new interface driver xpad [ 1.171086]@3 synaptics,s3320: tpd_driver_init enter [ 1.171871]@3 synaptics,s3320: before on cpu [3] [ 1.171886]@3 synaptics,s3320: check CPU[0] is [online] [ 1.172474]@3 touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 3 [ 1.172485]@3 touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online [ 1.174225]@3 input: tri-state-key as /devices/soc/soc:tri_state_key/input/input1 [ 1.174401]@3 switch_data->key3_gpio=1013 [ 1.174414]@3 switch_data->key2_gpio=1012 [ 1.174425]@3 switch_data->key1_gpio=1014 [ 1.175827]@3 fpc1020_probe [ 1.176022]@3 fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95 [ 1.176057]@3 fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86 [ 1.176078]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25 [ 1.176085]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25) [ 1.176114]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143 [ 1.176120]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143) [ 1.176148]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14 [ 1.176279]@3 input: fpc1020 as /devices/virtual/input/input2 [ 1.176532]@3 fpc1020 soc:fpc_fpc1020: requested irq 383 [ 1.176592]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok [ 1.177917]@3 qcom,qpnp-rtc qpnp-rtc-ffffffc175cf3000: rtc core: registered qpnp_rtc as rtc0 [ 1.178101]@3 i2c /dev entries driver [ 1.210295]@3 vmem: Up and running with 4 banks of memory from [io size 0x3e8a2140c9 pref window disabled] [ 1.223988]@3 msm_camera_pinctrl_init:1201 Getting pinctrl handle failed [ 1.224015]@3 msm_camera_power_up:1242 Initialization of pinctrl failed [ 1.224023]@3 msm_camera_request_gpio_table:732 invalid gpio_tbl (null) / size 0 [ 1.229475]@3 msm_cci_init:1363: hw_version = 0x10040000 [ 1.229720]@3 msm_eeprom_imx298_read_vendorInfo read 0x0700=1 [ 1.229727]@3 msm_eeprom_imx298_read_vendorInfo pdaf calibration is valid [ 1.229762]@3 qcom,slave-addr = 0xA0 [ 1.238755]@3 qcom,slave-addr = 0xA0 [ 1.247776]@3 qcom,slave-addr = 0xA0 [ 1.256731]@3 qcom,slave-addr = 0xA0 [ 1.265922]@3 qcom,slave-addr = 0xA0 [ 1.274786]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2 [ 1.274920]@3 qcom,slave-addr = 0xA0 [ 1.275398]@1 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.276348]@1 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.277114]@1 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.277712]@1 ufs_get_capacity_info size = 0x7734000 scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.278763]@0 scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.279202]@0 scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.279647]@0 scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.280076]@0 scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.280620]@0 scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6 [ 1.281605]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks [ 1.282127]@2 sd 0:0:0:1: [sdb] 16384-byte physical blocks [ 1.284014]@3 qcom,slave-addr = 0xA0 [ 1.285425]@2 sd 0:0:0:4: [sde] 16384-byte physical blocks [ 1.285436]@3 sd 0:0:0:5: [sdf] 16384-byte physical blocks [ 1.285775]@2 sd 0:0:0:3: [sdd] 16384-byte physical blocks [ 1.286841]@0 sd 0:0:0:2: [sdc] 16384-byte physical blocks [ 1.287659]@2 sdb: sdb1 [ 1.288410]@0 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 1.291785]@1 sdd: sdd1 sdd2 sdd3 [ 1.291786]@0 sdf: sdf1 sdf2 sdf3 sdf4 [ 1.293855]@2 sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 [ 1.295475]@0 sdc: sdc1 [ 1.296295]@0 qcom,slave-addr = 0xA0 [ 1.305298]@1 qcom,slave-addr = 0xA0 [ 1.316959]@1 msm_camera_request_gpio_table:732 invalid gpio_tbl (null) / size 0 [ 1.322793]@1 msm_cci_init:1363: hw_version = 0x10040000 [ 1.322873]@1 qcom,slave-addr = 0x20 [ 1.340124]@1 qcom,slave-addr = 0x20 [ 1.360047]@1 qcom,slave-addr = 0x20 [ 1.380037]@1 qcom,slave-addr = 0x20 [ 1.400034]@1 qcom,slave-addr = 0x20 [ 1.420034]@1 qcom,slave-addr = 0x20 [ 1.440034]@1 qcom,slave-addr = 0x20 [ 1.460034]@1 qcom,slave-addr = 0x20 [ 1.470056]@0 synaptics,s3320: after on cpu [0] [ 1.470065]@0 synaptics,s3320: synaptics_ts_probe is called [ 1.470418]@0 synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1 [ 1.470431]@0 synaptics,s3320: ts->enable2v8_gpio not specified [ 1.470440]@0 synaptics,s3320: ts->max_num not specified [ 1.470447]@0 synaptics,s3320: button-map not specified [ 1.470454]@0 synaptics,s3320: synaptics:button map readed is 0 0 0 [ 1.470463]@0 synaptics,s3320: synaptics,tx-rx-num is 16 28 [ 1.470471]@0 synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10 [ 1.470926]@0 touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0 [ 1.470946]@0 touchkey,s1302: synaptics_ts_probe is called [ 1.472386]@0 synaptics,s3320: synaptics:enable the v1p8_gpio [ 1.480086]@1 qcom,slave-addr = 0x20 [ 1.482416]@1 qcom,slave-addr = 0x20 [ 1.487474]@0 synaptics,s3320: synaptics:enable the reset_gpio [ 1.500051]@1 qcom,slave-addr = 0x20 [ 1.502393]@1 qcom,slave-addr = 0x20 [ 1.520034]@1 qcom,slave-addr = 0x20 [ 1.537408]@1 MSM-CPP cpp_init_hardware:1148 CPP HW Version: 0x60000000 [ 1.537449]@1 MSM-CPP cpp_init_hardware:1169 stream_cnt:0 [ 1.544973]@2 __msm_jpeg_init:1537] Jpeg Device id 0 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3 msm_fd_hw_set_dt_parms_by_name: Error property does not exist [ 1.590494]@0 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x18 (ok) synaptics,s3320: F12_2D_QUERY_BASE = 50 			F12_2D_CMD_BASE = 0 			F12_2D_CTRL_BASE	= 15 			F12_2D_DATA_BASE	= 8 			 synaptics,s3320: F01_RMI_QUERY_BASE = 33 			F01_RMI_CMD_BASE = 2a 			F01_RMI_CTRL_BASE	= e 			F01_RMI_DATA_BASE	= 6 			synaptics,s3320: F34_FLASH_QUERY_BASE = 2b 			F34_FLASH_CMD_BASE	= 0 			F34_FLASH_CTRL_BASE	= d 			F34_FLASH_DATA_BASE	= 0 			 synaptics,s3320: F51_CUSTOM_QUERY_BASE = 55 			F51_CUSTOM_CMD_BASE = 0 			F51_CUSTOM_CTRL_BASE = 19 			F51_CUSTOM_DATA_BASE = 0 			synaptics,s3320: F54_QUERY_BASE = 4d 			F54_CMD_BASE = 4c 			F54_CTRL_BASE	= e 			F54_DATA_BASE	= 0 			 synaptics,s3320: before fw update bootloader_mode[0x0] [ 1.592669]@0 synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15801123 [ 1.593503]@0 synaptics,s3320: synatpitcs_fw: fw_name = tp/fw_synaptics_15801b.img [ 1.593784]@0 synaptics,s3320: synaptics_init_panel is called! [ 1.594053]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80] [ 1.595650]@0 synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919 [ 1.595801]@0 synaptics,s3320: afte fw update,program memory self-check bootloader_mode = 0x0 [ 1.596260]@0 synaptics,s3320: synaptics_soft_reset !!! [ 1.650045]@2 msm_fd aa4000.qcom,fd: Face detection halt timeout [ 1.652187]@3 load_data: chip is NULL ! [ 1.652496]@3 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19 [ 1.652764]@3 load_data: chip is NULL ! [ 1.652773]@2 bq27541_battery_probe probe sucdess [ 1.652797]@2 i2c-core: driver [bq27541-battery] using legacy suspend method [ 1.652804]@2 i2c-core: driver [bq27541-battery] using legacy resume method [ 1.654823]@2 unable to find DT imem DLOAD mode node [ 1.656153]@2 unable to find DT imem EDLOAD mode node [ 1.656166]@2 get_param_by_index_and_offset[75] sid_index = 0 offset = 76 buf = ffffffc001628680 length = 28 [ 1.657859]@2 unable to find DT imem dload-type node [ 1.663562]@3 FG: fg_config_esr_extract: ESR extract is disabled [ 1.673131]@3 of_batterydata_get_best_profile: itech_3000mah found [ 1.700074]@0 synaptics,s3320: synaptics_input_init is called [ 1.700243]@0 input: synaptics as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input3 [ 1.702453]@3 device-mapper: uevent: version 1.0.3 [ 1.702612]@3 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com [ 1.702704]@3 device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 1.704126]@3 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property [ 1.704242]@3 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property [ 1.704249]@3 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree [ 1.704257]@3 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree [ 1.704865]@3 sdhci: Secure Digital Host Controller Interface driver [ 1.704876]@3 sdhci: Copyright(c) Pierre Ossman [ 1.704884]@3 sdhci-pltfm: SDHCI platform and OF driver helper [ 1.709330]@3 hidraw: raw HID events driver (C) Jiri Kosina [ 1.709567]@3 usbcore: registered new interface driver usbhid [ 1.709575]@3 usbhid: USB HID core driver [ 1.709948]@3 ashmem: initialized [ 1.710858]@3 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm [ 1.717937]@3 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. [ 1.719067]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered. [ 1.719117]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered. [ 1.721488]@3 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered. [ 1.724995]@3 devfreq soc:qcom,cpubw: Couldn't update frequency transition information. [ 1.725113]@3 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information. [ 1.725213]@3 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information. [ 1.725312]@3 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information. [ 1.726189]@3 devfreq soc:qcom,m4m: Couldn't update frequency transition information. [ 1.727430]@3 probe: Failed to create IPC log context [ 1.728901]@3 otracer: initialized [ 1.729008]@3 usbcore: registered new interface driver snd-usb-audio [ 1.732015]@3 tfa98xx_i2c_probe [ 1.740508]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120 [ 1.740770]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020 [ 1.740780]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.740921]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022 [ 1.740930]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.741059]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024 [ 1.741068]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.741195]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026 [ 1.741204]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.741225]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121 [ 1.741352]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021 [ 1.741361]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.741493]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023 [ 1.741501]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align [ 1.741510]@3 msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 failed with error -22 [ 1.741637]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025 [ 1.741646]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align [ 1.741653]@3 msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 failed with error -22 [ 1.741778]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027 [ 1.741787]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.741806]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130 [ 1.741933]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030 [ 1.741942]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742069]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032 [ 1.742078]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742204]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034 [ 1.742212]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742339]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036 [ 1.742348]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742370]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131 [ 1.742495]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031 [ 1.742503]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742630]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033 [ 1.742638]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742764]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035 [ 1.742772]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.742901]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037 [ 1.742909]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported [ 1.744987]@3 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp [ 1.752853]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.753139]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.754624]@3 GACT probability NOT on [ 1.754640]@3 Mirror/redirect action on [ 1.754658]@3 u32 classifier [ 1.754661]@3 Actions configured [ 1.754682]@3 Netfilter messages via NETLINK v0.30. [ 1.754711]@3 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.754885]@3 ctnetlink v0.93: registering with nfnetlink. [ 1.755144]@3 xt_time: kernel timezone is -0000 [ 1.755277]@3 ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.755346]@3 arp_tables: (C) 2002 David S. Miller [ 1.755369]@3 TCP: cubic registered [ 1.755375]@3 Initializing XFRM netlink socket [ 1.755539]@3 NET: Registered protocol family 10 [ 1.756169]@2 mip6: Mobile IPv6 [ 1.756186]@2 ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.756285]@2 sit: IPv6 over IPv4 tunneling driver [ 1.756505]@2 NET: Registered protocol family 17 [ 1.756519]@2 NET: Registered protocol family 15 [ 1.756548]@2 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.756565]@2 Bridge firewalling registered [ 1.756572]@2 Ebtables v2.0 registered [ 1.756735]@3 Bluetooth: ffffffc1764bbcf0 Bluetooth: ffffffc1764bbcd0Bluetooth: ffffffc1764bbd10 Bluetooth: ffffffc1764bbcf0Bluetooth: ffffffc1764bbcf0 Bluetooth: ffffffc1764bbcd0Bluetooth: ffffffc1764bbd40 Bluetooth: ffffffc1764bbd20l2tp_core: L2TP core driver, V2.0 [ 1.756821]@3 l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 1.756827]@3 l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 1.756841]@3 l2tp_netlink: L2TP netlink interface [ 1.756859]@3 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 1.756874]@3 l2tp_debugfs: L2TP debugfs support [ 1.756880]@3 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 1.757660]@3 NET: Registered protocol family 27 [ 1.757696]@3 IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR] synaptics,s3320: synaptic:ts->irq is 413 [ 1.760525]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0 [ 1.760534]@0 synaptics,s3320: synaptics_init_panel is called! [ 1.760785]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80] [ 1.765679]@1 kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on [ 1.769072]@1 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006b04000 sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006b04000 sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006b04000 sps:BAM 0x0000000006b04000 is registered.qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent! [ 1.770832]@2 smbcharger_charger_otg: no parameters [ 1.770934]@2 smbcharger_external_otg: no parameters [ 1.770951]@2 smbcharger_external_otg: supplied by pmi8994_boost_5v [ 1.771018]@2 SMBCHG: smbchg_hw_init: enable APSD [ 1.771058]@2 SMBCHG: smbchg_hw_init: disabe HVDCP [ 1.771251]@2 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: smbchg_charging_en:en=1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: smbchg_charging_en:en=0 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: smbchg_usb_suspend:0 [ 1.772044]@2 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 500, set to 500 [ 1.780545]@0 synaptics,s3320: synaptics_ts_probe: going to create files--tp_fw_update [ 1.780682]@0 synaptics,s3320: synaptics_ts_probe 3203: normal end [ 1.800245]@0 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0 [ 1.800265]@0 SMBCHG: handle_usb_insertion: inserted type = 5 (OTHER) qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: smbchg_charging_en:en=1 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail [ 1.800318]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: USB current_ma = 1800,typeC_support_current_ma=4000 [ 1.801001]@2 msm-usb-ssphy-qmp 7410000.ssphy: Initializing QMP phy [ 1.801125]@2 msm-dwc3 6a00000.ssusb: DWC3-msm runtime suspend [ 1.801134]@2 msm-dwc3 6a00000.ssusb: Not in P3,aborting LPM sequence [ 1.801172]@0 msm-dwc3 6a00000.ssusb: DWC3-msm runtime suspend [ 1.801185]@0 msm-dwc3 6a00000.ssusb: Not in P3,aborting LPM sequence [ 1.801192]@0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 1500 [ 1.801236]@0 msm-dwc3 6a00000.ssusb: DWC3-msm runtime suspend [ 1.801246]@0 msm-dwc3 6a00000.ssusb: Not in P3,aborting LPM sequence [ 1.801299]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = -22, online = 1 [ 1.801418]@0 SMBCHG: handle_usb_insertion: inserted type = 5 (OTHER) qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: smbchg_charging_en:en=1 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail [ 1.801592]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 1, online = 1 [ 1.801829]@0 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.817110]@0 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.817533]@0 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.818978]@0 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.820096]@1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent! [ 1.820152]@1 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.820161]@1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [ 1.820206]@1 SMBCHG: set_chg_parameter_in_different_temp: set_chg_parameter_in_different_temp:inserted type = 5 (OTHER),charger_type_value=5 [ 1.820252]@1 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1910, set to 1900 [ 1.820692]@1 SMBCHG: smbchg_external_power_changed: changed chip->usb_target_current_ma = 1500 [ 1.820701]@1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: USB current_ma = 1500,typeC_support_current_ma=4000 [ 1.821078]@1 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.821482]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1 [ 1.822542]@1 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.823157]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.823517]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.823912]@0 tusb320 7-0060: tusb320_probe [ 1.824307]@0 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x20 (ok) i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010 [ 1.824473]@0 tusb320_read_reg:reg(0x0), ret(-107) [ 1.824480]@0 tusb320 7-0060: DEV_ID(0x0)!= 0x30 [ 1.824494]@0 tusb320: probe of 7-0060 failed with error -22 [ 1.824550]@0 fusb301 7-0021: fusb301_probe [ 1.824849]@0 fusb301 7-0021: fusb301_gpio_configure OK! [ 1.825513]@0 fusb301 7-0021: fusb301_probe OK! [ 1.825576]@0 ptn5150 7-001d: ptn5150_probe [ 1.825635]@0 i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010 [ 1.825667]@0 ptn5150_read_reg: i2c read error: -5 [ 1.825674]@0 ptn5150 7-001d: DEV_ID(0x00)!= 0x0b || 0x09 [ 1.825685]@0 ptn5150: probe of 7-001d failed with error -22 [ 1.827358]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.827734]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.830401]@3 project_info_init_sysfs success [ 1.838024]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.838314]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.838712]@3 ngd_msm_ctrl 91c0000.slim: error creating ipc_logging context [ 1.839648]@3 RNDIS_IPA module is loaded. file system registered [ 1.840436]@3 mbim_init: initialize 1 instances [ 1.840473]@3 mbim_init: Initialized 1 ports [ 1.840855]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.841140]@3 rndis_qc_init: initialize rndis QC instance [ 1.841213]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.841248]@3 Number of LUNs=8 [ 1.841257]@3 Mass Storage Function, version: 2009/09/11 [ 1.841262]@3 LUN: removable file: (no medium) [ 1.841273]@3 Number of LUNs=1 [ 1.841301]@3 LUN: removable file: (no medium) [ 1.841305]@3 Number of LUNs=1 [ 1.841437]@3 android_usb gadget: android_usb ready [ 1.843482]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.843616]@3 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4 [ 1.843850]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.843934]@3 qcom,qpnp-rtc qpnp-rtc-ffffffc175cf3000: setting system clock to 1970-03-20 04:57:46 UTC (6757066) [ 1.845973]@3 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.846141]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.846533]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.848718]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.849124]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.850993]@2 msm_thermal:disable_msm_thermal Max frequency reset for CPU0 [ 1.851004]@2 msm_thermal:disable_msm_thermal Max frequency reset for CPU1 [ 1.851008]@2 msm_thermal:disable_msm_thermal Max frequency reset for CPU2 [ 1.851011]@2 msm_thermal:disable_msm_thermal Max frequency reset for CPU3 [ 1.851188]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.851499]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.853569]@3 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1] [ 1.853778]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00] [ 1.853901]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01] [ 1.854025]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10] [ 1.854144]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11] [ 1.854263]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0] [ 1.854381]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-] [ 1.854502]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-] [ 1.856593]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.856923]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.857259]@0 parse_cpu_levels: idx 1 545 [ 1.857268]@0 parse_cpu_levels: idx 2 1785 [ 1.857273]@0 parse_cpu_levels: idx 2 3025 [ 1.857372]@0 parse_cpu_levels: idx 1 545 [ 1.857377]@0 parse_cpu_levels: idx 2 1785 [ 1.857381]@0 parse_cpu_levels: idx 2 3025 [ 1.859357]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.859683]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.860417]@3 qcom,qpnp-flash-led qpnp-flash-led-ffffffc175d23400: Unable to acquire pinctrl [ 1.861953]@3 rmnet_ipa started initialization [ 1.861963]@3 IPA SSR support = True [ 1.861971]@3 IPA ipa-loaduC = True [ 1.861979]@3 IPA SG support = True [ 1.862061]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.862355]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.863314]@3 ipa ipa_sps_irq_control_all:932 EP (5) not allocated. [ 1.863323]@3 ipa ipa_uc_state_check:296 uC is not loaded [ 1.864072]@3 rmnet_ipa completed initialization [ 1.865204]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.865516]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.867661]@3 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux. [ 1.868861]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036 [ 1.869091]@3 apc0_pwrcl_mem_acc_corner: disabling [ 1.869097]@3 apc1_perfcl_mem_acc_corner: disabling [ 1.869102]@3 apcc_l3_mem_acc_corner: disabling [ 1.869106]@3 gfx_mem_acc_corner: disabling [ 1.869110]@3 kryo0-retention: disabling [ 1.869116]@3 kryo1-retention: disabling [ 1.869172]@3 gdsc_mmagic_bimc: disabling [ 1.869176]@3 rome_vreg: disabling [ 1.869177]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered [ 1.869249]@3 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests [ 1.869463]@3 clock_late_init: Removing enables held for handed-off clocks [ 1.873165]@3 ALSA device list: [ 1.873172]@3 No soundcards found. [ 1.873221]@3 Warning: unable to open an initial console. [ 1.873387]@3 Freeing unused kernel memory: 312K (ffffffc00128a000 - ffffffc0012d8000) [ 1.873396]@3 Freeing alternatives memory: 24K (ffffffc0012d8000 - ffffffc0012de000) [ 1.874082]@3 init: init started! [ 1.874408]@3 SELinux: security_load_policy, ss_initialized: 0 [ 1.876959]@3 SELinux: Permission audit_read in class capability2 not defined in policy. [ 1.876974]@3 SELinux: the above unknown classes and permissions will be denied [ 1.891647]@2 SELinux: security_load_policy, sidtab.shutdown: 0 [ 1.894567]@2 audit: type=1403 audit(6757066.539:2): policy loaded auid=4294967295 ses=4294967295 [ 1.894882]@2 init: (Initializing SELinux non-enforcing took 0.02s.) [ 1.897252]@1 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.897957]@2 init: init second stage started! [ 1.898182]@2 init: property_set("ro.boot.selinux", "permissive") failed [ 1.898721]@1 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.920330]@2 init: waitpid failed: No child processes [ 1.920579]@2 init: (Loading properties from /default.prop took 0.00s.) [ 1.920832]@2 init: /init.rc: 11: invalid command 'setcon' [ 1.920866]@2 init: /init.rc: 57: invalid command 'load_all_props' [ 1.920920]@2 init: could not import file '/init.recovery.logd.rc' from '/init.rc' [ 1.920995]@2 init: (Parsing /init.recovery.usb.rc took 0.00s.) [ 1.921035]@2 init: (Parsing /init.recovery.qcom.rc took 0.00s.) [ 1.921046]@2 init: (Parsing /init.rc took 0.00s.) [ 1.921110]@2 audit: type=1400 audit(6757066.569:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1 [ 1.921147]@2 init: Starting service 'ueventd'... [ 1.921316]@2 init: Starting service 'healthd'... [ 1.921443]@2 init: Waiting for /dev/.coldboot_done... [ 1.922399]@3 ueventd: ueventd started! [ 1.923605]@0 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.944098]@2 load_data: stored_soc[0x0], shutdown_soc[126] [ 1.948927]@2 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.014560]@3 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.014722]@2 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.020433]@0 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x22 (ok) touchkey,s1302: product id is s1302 [ 2.021431]@0 touchkey,s1302: F11_2D_QUERY_BASE = 95 			F11_2D_CMD_BASE = 6e 			F11_2D_CTRL_BASE	= 3d 			F11_2D_DATA_BASE	= 15 			 touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4 [ 2.022982]@0 touchkey,s1302: before fw update,bootloader_mode = 0x0 [ 2.023139]@0 input: synaptics as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input5 [ 2.063853]@2 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.075926]@2 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.076072]@3 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.077564]@3 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.077746]@2 load_data: stored_soc[0x0], shutdown_soc[126] [ 2.080049]@0 touchkey,s1302: synaptic:ts->irq is 420 [ 2.080364]@0 touchkey,s1302: synaptics_soft_reset !!! [ 2.080396]@0 touchkey,s1302: create nodes is successe! [ 2.080501]@0 touchkey,s1302: synaptics_ts_probe s1302: normal end [ 2.080507]@0 touchkey,s1302: boot_time: synaptics_ts_probe return 0 [ 2.159012]@3 ueventd: Coldboot took 0.23s. [ 2.163412]@0 init: Waiting for /dev/.coldboot_done took 0.24s. [ 2.166030]@0 enable_store: android_usb: already disabled [ 2.166218]@0 init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}' [ 2.166233]@0 init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct' [ 2.166310]@0 init: (Loading properties from /system/build.prop took 0.00s.) [ 2.166335]@0 init: (Loading properties from /vendor/build.prop took 0.00s.) [ 2.166358]@0 init: (Loading properties from /factory/factory.prop took 0.00s.) [ 2.166393]@0 fs_mgr: Cannot open file /fstab.qcom [ 2.166405]@0 init: unable to read fstab /fstab.qcom: No such file or directory [ 2.166435]@0 init: (Loading properties from /data/local.prop took 0.00s.) [ 2.166456]@0 init: Unable to open persistent property directory "/data/property": No such file or directory [ 2.166908]@0 init: Starting service 'set_permissive'... [ 2.167889]@0 init: Warning! Service recovery needs a SELinux domain defined; please fix! [ 2.167905]@0 init: Starting service 'recovery'... [ 2.168156]@3 audit: type=1400 audit(6757066.809:4): avc: denied { execute_no_trans } for pid=403 comm="init" path="/sbin/recovery" dev="rootfs" ino=8163 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 2.168185]@0 init: Starting service 'adbd'... [ 2.170756]@0 read descriptors [ 2.170774]@0 read strings [ 2.170791]@0 mtp_bind_config [ 2.170804]@0 mtp_create_bulk_endpoints: useFixAddr:false [ 2.176235]@0 audit: type=1400 audit(6757066.819:5): avc: denied { write } for pid=406 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1 [ 2.177143]@1 init: Service 'set_permissive' (pid 402) exited with status 0 [ 2.182813]@2 audit: type=1400 audit(6757066.829:6): avc: denied { append } for pid=403 comm="recovery" path="/tmp/recovery.log" dev="tmpfs" ino=7041 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1 [ 2.182891]@2 audit: type=1400 audit(6757066.829:7): avc: denied { write } for pid=403 comm="recovery" name="property_service" dev="tmpfs" ino=7031 scontext=u:r:init:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1 [ 2.183695]@2 audit: type=1400 audit(6757066.829:8): avc: denied { write } for pid=403 comm="recovery" name="fb0" dev="tmpfs" ino=9855 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1 [ 2.183839]@3 audit: type=1400 audit(6757066.829:9): avc: denied { ioctl } for pid=403 comm="recovery" path="/dev/graphics/fb0" dev="tmpfs" ino=9855 ioctlcmd=4602 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1 [ 2.192095]@3 blank off start [ 2.192106]@3 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off [ 2.192125]@3 synaptics,s3320: fb_notifier_callback blank[4],event[0x10] [ 2.192128]@3 synaptics,s3320: fb_notifier_callback : going TP suspend start [ 2.192131]@3 synaptics,s3320: synaptics_ts_suspend enter [ 2.192138]@3 synaptics,s3320: synaptics_enable_interrupt_for_gesture is called [ 2.192558]@3 synaptics,s3320: F12_2D_CTRL20:0x1c=[2]:0x2 [ 2.192722]@3 synaptics,s3320: enter gesture mode [ 2.192725]@3 synaptics,s3320: synaptics_ts_suspend normal end [ 2.192727]@3 synaptics,s3320: fb_notifier_callback : going TP suspend end [ 2.192781]@3 synaptics,s3320: fb_notifier_callback blank[4],event[0x9] [ 2.193042]@3 blank off end [ 2.193067]@3 blank on start [ 2.193070]@3 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on [ 2.193080]@3 synaptics,s3320: fb_notifier_callback blank[0],event[0x10] [ 2.193083]@3 synaptics,s3320: fb_notifier_callback going TP resume start [ 2.193086]@3 synaptics,s3320: synaptics_ts_resume enter! [ 2.193098]@3 synaptics,s3320: synaptics_ts_resume:normal end! [ 2.193100]@3 synaptics,s3320: fb_notifier_callback going TP resume end [ 2.193168]@3 synaptics,s3320: fb_notifier_callback blank[0],event[0x9] [ 2.193172]@3 FG: oneplus_set_lcd_off_status: set lcd off status fail [ 2.193431]@3 blank on end [ 2.200057]@1 synaptics,s3320: tp_baseline_get start! [ 2.200064]@1 synaptics,s3320: synaptics_enable_interrupt_for_gesture is called [ 2.200430]@1 synaptics,s3320: F12_2D_CTRL20:0x1c=[2]:0x0 [ 2.205346]@3 mdss_dsi_on start [ 2.205352]@3 mdss_dsi_on end [ 2.207308]@3 --------backlight level = 127--------- [ 2.212317]@2 sps: BAM device 0x0000000007584000 is not registered yet. [ 2.212348]@2 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007584000 sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007584000 sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007584000 sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007584000 sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007584000 sps:BAM 0x0000000007584000 is registered. sps:BAM 0x0000000007584000 (va:0xffffff8006500000) enabled: ver:0x19, number of pipes:24 [ 2.235890]@3 audit: type=1400 audit(6757066.879:10): avc: denied { execmem } for pid=403 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1 [ 2.250084]@0 synaptics,s3320: tp_baseline_get end! [ 2.250451]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0 [ 2.250458]@0 synaptics,s3320: synaptics_init_panel is called! [ 2.250751]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80] [ 2.276744]@3 EXT4-fs (sda3): recovery complete [ 2.277147]@3 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: [ 2.281600]@3 EXT4-fs (sda15): VFS: Can't find ext4 filesystem [ 2.281770]@3 EXT4-fs (sda15): VFS: Can't find ext4 filesystem [ 2.285688]@3 EXT4-fs (sda15): VFS: Can't find ext4 filesystem [ 2.285855]@3 EXT4-fs (sda15): VFS: Can't find ext4 filesystem [ 2.286878]@1 init: Starting service 'sbinqseecomd'... [ 2.298264]@2 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use) [ 2.650334]@2 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x23 (ok) bq27541-battery 6-0055: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200 [ 2.658748]@2 bq27541-battery 6-0055: Complete bq27541 configuration 0x604B [ 3.670227]@3 of_batterydata_get_best_profile: itech_3000mah found [ 5.670253]@3 of_batterydata_get_best_profile: itech_3000mah found [ 5.679780]@3 FG: fg_batt_profile_init: Battery SOC: 96, V: 4274877uV [ 5.681205]@3 bq27541_battery_soc =92 [ 5.681227]@3 load_data: stored_soc[0x0], shutdown_soc[126] [ 5.681232]@3 soc=92,soc_load:-1 [ 5.681236]@3 backup_soc: backup_soc[92] [ 5.682296]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [ 5.918053]@3 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288 [ 5.918067]@3 get_ice_device_from_storage_type: found ice device ffffffc0b55d4a00 [ 6.038884]@3 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -71,app_id = 0,lstr = 12288 [ 6.038896]@3 QSEECOM: __qseecom_set_clear_ce_key: process_incomplete_cmd FAILED, resp.result -71 [ 6.038901]@3 get_ice_device_from_storage_type: found ice device ffffffc0b55d4a00 [ 6.039206]@3 QSEECOM: qseecom_create_key: Failed to create key: pipe 2, ce 0: -22 [ 6.039212]@3 QSEECOM: qseecom_ioctl: failed to create encryption key: -22 [ 6.180200]@3 random: nonblocking pool is initialized [ 6.180213]@3 switch_dev_work ,tristate set to state(3) [ 6.830083]@0 SMBCHG: smbchg_re_det_chg_type: Re-detect charger type [ 6.830103]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: USB current_ma = 300,typeC_support_current_ma=4000 [ 6.830209]@0 SMBCHG: smbchg_re_det_chg_type: Faking Removal [ 6.830354]@2 SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 aicl = 300 [ 6.830389]@3 SMBCHG: src_detect_handler: chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0 [ 6.830402]@3 SMBCHG: handle_usb_removal: handle_usb_removal triggered [ 6.830795]@3 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 1, online = 0 [ 6.832937]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [ 6.836777]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [ 6.950272]@0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 0 [ 6.950292]@0 msm-dwc3 6a00000.ssusb: DWC3-msm runtime suspend [ 6.950656]@0 msm-dwc3 6a00000.ssusb: DWC3 in low power mode. irq:730 [ 6.953376]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 0 [ 7.340049]@0 SMBCHG: smbchg_re_det_chg_type: Faking Insertion [ 7.340221]@2 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 aicl = 300 [ 7.343499]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 0 [ 8.194433]@3 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0 [ 8.194473]@3 SMBCHG: handle_usb_insertion: inserted type = 5 (OTHER) qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: smbchg_charging_en:en=1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: USB current_ma = 1800,typeC_support_current_ma=4000 [ 8.194812]@3 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 1 [ 8.197537]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 0 [ 8.202514]@3 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 0 [ 8.310106]@1 msm-dwc3 6a00000.ssusb: Avail curr from USB = 1500 [ 8.312537]@1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [ 8.313735]@1 SMBCHG: set_chg_parameter_in_different_temp: set_chg_parameter_in_different_temp:inserted type = 5 (OTHER),charger_type_value=5 [ 8.314112]@1 SMBCHG: smbchg_external_power_changed: changed chip->usb_target_current_ma = 1500 [ 8.314121]@1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: USB current_ma = 1500,typeC_support_current_ma=4000 [ 9.582358]@3 scm_call failed: func id 0x72000501, arginfo: 0x22, args: 0x1b32c5000, 0x1000, 0x0, 0x0, ret: -2, syscall returns: 0xffffffffffffffbf, 0x0, 0x0 [ 9.582377]@3 get_ice_device_from_storage_type: found ice device ffffffc0b55d4a00 [ 9.709281]@3 get_ice_device_from_storage_type: found ice device ffffffc0b55d4a00 [ 9.709670]@3 QSEECOM: qseecom_create_key: Set the key successfully [ 9.710395]@3 device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/sda15 to dm-req-crypt ok! [ 9.710587]@3 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 [ 9.710596]@3 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 [ 9.800036]@0 synap rmidev_create_attr [ 10.100049]@0 synap rmidev_create_attr [ 11.054146]@3 EXT4-fs (dm-0): 9 orphan inodes deleted [ 11.054161]@3 EXT4-fs (dm-0): recovery complete [ 11.057838]@3 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: [ 11.141559]@0 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: [ 11.167221]@0 SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped). [ 11.167779]@0 SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped). [ 11.169502]@0 SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped). [ 11.169605]@0 SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped). [ 11.170169]@0 SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped). [ 11.170424]@0 SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped). [ 11.170659]@0 SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped). [ 11.171982]@0 SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped). [ 11.172079]@0 SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped). [ 11.172352]@0 SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped). [ 11.172546]@0 SELinux: Context u:object_r:mpctl_socket:s0 is not valid (left unmapped). [ 11.172643]@0 SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped). [ 11.172725]@0 SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped). [ 11.172790]@0 SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped). [ 11.172851]@0 SELinux: Context u:object_r:qvop_data_file:s0 is not valid (left unmapped). [ 11.172916]@0 SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped). [ 11.176297]@0 audit_printk_skb: 36 callbacks suppressed [ 11.176307]@0 audit: type=1400 audit(6757075.819:23): avc: denied { read } for pid=403 comm="recovery" name="com.android.backupconfirm" dev="dm-0" ino=1831428 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1 [ 11.176332]@0 audit: type=1400 audit(6757075.819:24): avc: denied { open } for pid=403 comm="recovery" path="/data/data/com.android.backupconfirm" dev="dm-0" ino=1831428 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1 [ 11.178167]@0 audit: type=1400 audit(6757075.819:25): avc: denied { getattr } for pid=403 comm="recovery" path="/data/data/com.android.providers.calendar/shared_prefs/CalendarUpgradeReceiver.xml" dev="dm-0" ino=1831573 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=file permissive=1 [ 11.290536]@3 SELinux: Context u:object_r:qtitetherservice_app_data_file:s0 is not valid (left unmapped). [ 11.323259]@3 SELinux: Context u:object_r:dpmd_app_data_file:s0 is not valid (left unmapped). [ 11.451428]@3 SELinux: Context u:object_r:qsee_svc_app_data_file:s0 is not valid (left unmapped). [ 11.525929]@3 audit: type=1400 audit(6757076.169:26): avc: denied { read } for pid=403 comm="recovery" name="requests" dev="dm-0" ino=1832417 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1 [ 11.525953]@3 audit: type=1400 audit(6757076.169:27): avc: denied { open } for pid=403 comm="recovery" path="/data/data/eu.chainfire.supersu/requests" dev="dm-0" ino=1832417 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1 [ 11.534880]@3 audit: type=1400 audit(6757076.179:28): avc: denied { getattr } for pid=403 comm="recovery" path="/data/data/com.xda.labs/files/default.realm.management/access_control.new_commit.cv" dev="dm-0" ino=1848248 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=fifo_file permissive=1 [ 12.069844]@2 SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped). [ 12.079227]@2 SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped). [ 12.079704]@2 SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped). [ 12.081667]@2 SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped). [ 12.083619]@2 SELinux: Context u:object_r:oem_data_file:s0 is not valid (left unmapped). [ 12.084079]@2 SELinux: Context u:object_r:fpc_images_file:s0 is not valid (left unmapped). [ 12.084874]@2 SELinux: Context u:object_r:fpc_data_file:s0 is not valid (left unmapped). [ 12.085834]@2 SELinux: Context u:object_r:usf_data_file:s0 is not valid (left unmapped). [ 12.284601]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [ 12.294606]@3 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: [ 13.232860]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [ 13.808040]@2 audit: type=1400 audit(6757078.449:29): avc: denied { append } for pid=403 comm="recovery" path="/cache/recovery/log" dev="sda3" ino=8195 scontext=u:r:init:s0 tcontext=u:object_r:cache_file:s0 tclass=file permissive=1 [ 13.843678]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [ 13.862932]@3 audit: type=1400 audit(1481070869.087:30): avc: denied { create } for pid=403 comm="recovery" name="orsin" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1 [ 13.862979]@3 audit: type=1400 audit(1481070869.087:31): avc: denied { read } for pid=403 comm="recovery" name="orsin" dev="rootfs" ino=10023 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1 [ 13.862994]@3 audit: type=1400 audit(1481070869.087:32): avc: denied { open } for pid=403 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=10023 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1 [ 14.072997]@0 SMBCHG: update_heartbeat: update_heartbeat:inserted chrger type = 5 (OTHER),charger_type_value=5 [ 14.088537]@0 SMBCHG: update_heartbeat: charger_type:5,bat_voltage:4275000,charger_voltage:4935,current:-863000,temp:346,capacity:92 [ 14.088571]@0 SMBCHG: update_heartbeat: CHGR Ibat - 12 [ 14.088586]@0 SMBCHG: update_heartbeat: CHGR Iusb - 0D [ 14.088599]@0 SMBCHG: update_heartbeat: 0x1307 AICL STS - 0D [ 14.088621]@0 SMBCHG: update_heartbeat: CHGR en - 00 [ 14.088638]@0 SMBCHG: update_heartbeat: charger TYPE - 20 [ 14.088652]@0 SMBCHG: update_heartbeat: 0x1340 - 01 [ 14.088665]@0 SMBCHG: update_heartbeat: CHGR Vfloat - 29 [ 14.088678]@0 SMBCHG: update_heartbeat: CHGR Rcharge - 01 [ 14.637473]@2 mtp_open [ 18.445800]@0 synaptics,s3320: start get base data:1 [ 18.445814]@0 synaptics,s3320: tp_baseline_get start! [ 18.445820]@0 synaptics,s3320: synaptics_enable_interrupt_for_gesture is called [ 18.446911]@0 synaptics,s3320: F12_2D_CTRL20:0x1c=[2]:0x0 [ 18.500081]@0 synaptics,s3320: tp_baseline_get end! [ 18.500444]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0 [ 18.500451]@0 synaptics,s3320: synaptics_init_panel is called! [ 18.500738]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80] [20161207_00:34:35.458433]@2 synaptics,s3320: all finger up [20161207_00:34:35.690320]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [20161207_00:34:37.853521]@3 audit_printk_skb: 3 callbacks suppressed [20161207_00:34:37.853533]@3 audit: type=1400 audit(1481070877.847:34): avc: denied { rename } for pid=456 comm="recovery" name="__properties__" dev="tmpfs" ino=7022 scontext=u:r:init:s0 tcontext=u:object_r:properties_device:s0 tclass=file permissive=1 [20161207_00:34:37.855175]@0 audit: type=1400 audit(1481070877.847:35): avc: denied { execute } for pid=457 comm="recovery" name="updater" dev="tmpfs" ino=10030 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1 [20161207_00:34:37.855340]@3 audit: type=1400 audit(1481070877.847:36): avc: denied { execute_no_trans } for pid=457 comm="recovery" path="/tmp/updater" dev="tmpfs" ino=10030 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1 [20161207_00:34:38.173168]@2 mdss_fb_do_ioctl: unsupported ioctl (5413) [20161207_00:34:38.194788]@0 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: (null) [20161207_00:34:38.199690]@2 audit: type=1400 audit(1481070878.187:37): avc: denied { mounton } for pid=469 comm="mount" path="/data" dev="dm-0" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1 [20161207_00:34:38.307720]@2 audit: type=1400 audit(1481070878.297:38): avc: denied { create } for pid=512 comm="busybox" name="[" scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1 [20161207_00:34:38.688057]@3 mdss_fb_do_ioctl: unsupported ioctl (5413) [20161207_00:34:39.104159]@3 audit: type=1400 audit(1481070879.097:39): avc: denied { ioctl } for pid=825 comm="gunzip" path="/tmp/anykernel/split_img/boot.img-ramdisk.gz" dev="tmpfs" ino=10224 ioctlcmd=5401 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1 [20161207_00:34:39.334732]@3 mdss_fb_do_ioctl: unsupported ioctl (5413) [20161207_00:34:39.359403]@2 audit: type=1400 audit(1481070879.347:40): avc: denied { rename } for pid=840 comm="sed" name="init.qcom.rc14cA92" dev="tmpfs" ino=10345 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1 [20161207_00:34:44.530490]@3 EXT4-fs (sde20): re-mounted. Opts: data=ordered [20161207_00:34:44.545276]@3 audit: type=1400 audit(1481070884.537:41): avc: denied { setattr } for pid=863 comm="chown" name="ansi_cprng.ko" dev="sde20" ino=2117 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1 [20161207_00:34:44.545969]@3 audit: type=1400 audit(1481070884.537:42): avc: denied { setattr } for pid=863 comm="chown" name="qca_cld" dev="sde20" ino=2127 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=1 [20161207_00:34:44.649767]@2 EXT4-fs (sde20): re-mounted. Opts: data=ordered [20161207_00:34:44.666087]@2 audit: type=1400 audit(1481070884.657:43): avc: denied { unlink } for pid=889 comm="rm" name="watchdogd" dev="tmpfs" ino=10341 scontext=u:r:init:s0 tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=1 [20161207_00:34:45.352409]@2 audit: type=1400 audit(1481070885.347:44): avc: denied { mounton } for pid=893 comm="mount" path="/sdcard" dev="dm-0" ino=1537089 scontext=u:r:init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1 [20161207_00:34:45.620269]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [20161207_00:34:49.744309]@0 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: [20161207_00:34:49.949812]@2 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [20161207_00:34:50.216879]@2 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [20161207_00:34:50.904639]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [20161207_00:34:50.912470]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: [20161207_00:34:50.986918]@1 SysRq : Emergency Remount R/O [20161207_00:34:51.062615]@1 EXT4-fs (dm-0): re-mounted. Opts: (null) [20161207_00:34:51.087389]@1 fusb301_power_down_callback : action=0x1 [20161207_00:34:51.088227]@1 sd 0:0:0:4: [sde] Synchronizing SCSI cache [20161207_00:34:51.088389]@0 sd 0:0:0:0: [sda] Synchronizing SCSI cache [20161207_00:34:51.089199]@0 mdss_fb_release_all: try to close unopened fb 1! from pid:1 name:init [20161207_00:34:51.089941]@1 EXT4-fs (sda3): re-mounted. Opts: (null) [20161207_00:34:51.090089]@1 Emergency Remount complete [20161207_00:34:51.090355]@1 qpnp-smbcharger qpnp-smbcharger-ffffffc175d21000: current_limit = 1500 [20161207_00:34:51.090540]@0 --------backlight level = 0--------- [20161207_00:34:51.093391]@0 mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0 [20161207_00:34:51.313737]@1 mdss_dsi_off start [20161207_00:34:51.339743]@1 mdss_dsi_off end [20161207_00:34:51.341961]@1 SMBCHG: smbchg_shutdown: smbchg_shutdown [20161207_00:34:51.342443]@0 reboot: Restarting system with command '' [20161207_00:34:51.342490]@0 Going down for restart now [20161207_00:34:51.343160]@0 qcom,qpnp-power-on qpnp-power-on-ffffffc175cf3c00: PMIC@SID2: configuring PON for reset [20161207_00:34:51.343748]@0 msm_restart_prepare : cmd is , set to reboot mode