· 9 years ago · Jun 19, 2017, 06:40 AM
1pppd options in effect:
2-detach # (from command line)
3logfd 2 # (from command line)
4maxfail 3 # (from command line)
5ktune # (from command line)
6dump # (from command line)
7noauth # (from command line)
8name gw001.m3touchinc.com # (from command line)
9user guest # (from command line)
10password ?????? # (from command line)
11usehostname # (from command line)
12/dev/ttyUSB2 # (from command line)
13460800 # (from command line)
14lock # (from command line)
15connect /usr/sbin/chat -v -f /tmp/pppd.tmp.1378 # (from command line)
16crtscts # (from command line)
17modem # (from command line)
18noipdefault # (from command line)
19defaultroute # (from command line)
20usepeerdns # (from command line)
21Serial connection established.
22Using interface ppp0
23Connect: ppp0 <--> /dev/ttyUSB2
24CHAP authentication succeeded
25CHAP authentication succeeded
26Could not determine remote IP address: defaulting to 10.64.64.64
27local IP address 10.125.0.95
28remote IP address 10.64.64.64
29primary DNS address 64.71.255.198
30secondary DNS address 64.71.255.253
31SH_SOURCED=1
32MACHTYPE=i386-redhat-linux-gnu
33MEGZ=/usr/bin/sakis3g
34MYVERSION=0.2.0e
35OPTERR=1
36OPTIND=1
37OSTYPE=linux-gnu
38PATH=/bin:/sbin:/usr/bin:/usr/sbin
39PIPESTATUS=([0]="0")
40POSIXLY_CORRECT=y
41PPID=1339
42PREVLEVEL=N
43PROVIDER=/usr/bin/sakis3g
44PS4='+ '
45PWD=/
46RUNLEVEL=3
47SHELL=/bin/bash
48SHELLOPTS=braceexpand:hashall:interactive-comments:posix
49SHLVL=5
50TERM=linux
51TRAPS='cleanscreen '
52UID=0
53UPSTART_EVENT=runlevel
54UPSTART_JOB=rc3
55UPSTART_JOB_ID=12
56USER=
57USERNAME=
58XAUTHORITY=
59YESFUNCNAME=1
60_='Environment is:'
61allargs='"start" "--debug"'
62binaryvariable=grep
63cutbin=/bin/cut
64grepbin=/bin/grep
65lastverbosetext='Starting up'
66me=/tmp/sakis3gz.1339.sakis3g
67previous=N
68printfbin=/usr/bin/printf
69runlevel=3
70sedbin=/bin/sed
71trbin=/usr/bin/tr
72verbosecurrentcount=7
73whichbin=/usr/bin/which
74-------------------------------------------
75Will now proceed with Sakis3G execution.
76-------------------------------------------
77[01378] [20:06:25] [find_binary ] Located "echo" within PATH (/bin/echo).
78[01378] [20:06:25] [check_level_one_deps] Level 1 dependencies met.
79[01378] [20:06:25] [fix_path ] Dir "/bin" exists in PATH.
80[01378] [20:06:25] [fix_path ] Dir "/usr/bin" exists in PATH.
81[01378] [20:06:25] [fix_path ] Dir "/sbin" exists in PATH.
82[01378] [20:06:25] [fix_path ] Dir "/usr/sbin" exists in PATH.
83[01378] [20:06:25] [fix_path ] Done setting up PATH.
84[01378] [20:06:25] [find_binary ] Located "readlink" within PATH (/bin/readlink).
85[01378] [20:06:25] [get_me ] My location is "/usr/bin/sakis3g".
86[01378] [20:06:25] [find_binary ] Located "wc" within PATH (/usr/bin/wc).
87[01378] [20:06:25] [find_binary ] Located "cat" within PATH (/bin/cat).
88[01378] [20:06:25] [find_binary ] Located "tail" within PATH (/usr/bin/tail).
89[01378] [20:06:25] [find_binary ] Located "head" within PATH (/usr/bin/head).
90[01378] [20:06:25] [find_binary ] Located "sort" within PATH (/bin/sort).
91[01378] [20:06:25] [find_binary ] Located "uniq" within PATH (/usr/bin/uniq).
92[01378] [20:06:25] [find_binary ] Located "ls" within PATH (/bin/ls).
93[01378] [20:06:25] [find_binary ] Located "setsid" within PATH (/usr/bin/setsid).
94[01378] [20:06:25] [find_binary ] Located "getent" within PATH (/usr/bin/getent).
95[01378] [20:06:25] [find_binary ] Located "ps" within PATH (/bin/ps).
96[01378] [20:06:25] [find_binary ] Located "chmod" within PATH (/bin/chmod).
97[01378] [20:06:25] [find_binary ] Located "chown" within PATH (/bin/chown).
98[01378] [20:06:25] [find_binary ] Located "touch" within PATH (/bin/touch).
99[01378] [20:06:25] [find_binary ] Located "expr" within PATH (/usr/bin/expr).
100[01378] [20:06:25] [find_binary ] Located "seq" within PATH (/usr/bin/seq).
101[01378] [20:06:25] [find_binary ] Located "cp" within PATH (/bin/cp).
102[01378] [20:06:25] [find_binary ] Located "rm" within PATH (/bin/rm).
103[01378] [20:06:25] [find_binary ] Located "who" within PATH (/usr/bin/who).
104[01378] [20:06:25] [find_binary ] Located "mv" within PATH (/bin/mv).
105[01378] [20:06:25] [find_binary ] Located "basename" within PATH (/bin/basename).
106[01378] [20:06:25] [find_binary ] Located "dirname" within PATH (/usr/bin/dirname).
107[01378] [20:06:25] [check_level_two_deps] Level 2 dependencies met.
108[01378] [20:06:25] [resolv_binaries ] Basic binaries are resolved.
109[01378] [20:06:25] [check_udevd ] Parent process is: bash
110[01378] [20:06:25] [check_udevd ] Running by user request.
111[01378] [20:06:26] [find_user ] Person behind screen is root.
112[01378] [20:06:26] [config_load ] Configuration file /etc/default/sakis3g does not exist or is not readable.
113[01378] [20:06:26] [config_load ] Configuration file /etc/sysconfig/sakis3g does not exist or is not readable.
114[01378] [20:06:26] [config_load ] Loading system-wide configuration file /etc/sakis3g.conf.
115/-------------------------------------------------------------------------------
116[01378] [20:06:26] Will now display contents of: '/etc/sakis3g.conf'
117/-------------------------------------------------------------------------------
118console
119pppd
120nostorage
121APN="isp.apn"
122USBDRIVER="option"
123MODEM="19d2:2000 19d2:0017"
124USBINTERFACE="2"
125APN_USER="guest"
126APN_PASS="guest"
127\-------------------------------------------------------------------------------
128-rw-r--r-- 1 root root 135 2010-10-01 19:42 /etc/sakis3g.conf
129\-------------------------------------------------------------------------------
130[01378] [20:06:26] [config_load ] Configuration arguments are: "console" "pppd" "nostorage" "APN=isp.apn" "USBDRIVER=option" "MODEM=19d2:2000 19d2:0017" "USBINTERFACE=2" "APN_USER=guest" "APN_PASS=guest"
131[01378] [20:06:26] [config_args_read ] Parsing configuration value: console.
132[01378] [20:06:26] [parse_switch ] Command line switch defined: console
133[01378] [20:06:26] [config_args_read ] Parsing configuration value: pppd.
134[01378] [20:06:26] [parse_switch ] Command line switch defined: pppd
135[01378] [20:06:26] [config_args_read ] Parsing configuration value: nostorage.
136[01378] [20:06:26] [parse_switch ] Command line switch defined: nostorage
137[01378] [20:06:26] [config_args_read ] Parsing configuration value: APN=isp.apn.
138[01378] [20:06:26] [parse_eval ] Command line set variable APN to "isp.apn".
139[01378] [20:06:26] [config_args_read ] Parsing configuration value: USBDRIVER=option.
140[01378] [20:06:26] [parse_eval ] Command line set variable USBDRIVER to "option".
141[01378] [20:06:26] [config_args_read ] Parsing configuration value: MODEM=19d2:2000 19d2:0017.
142[01378] [20:06:26] [parse_eval ] Command line set variable MODEM to "19d2:2000 19d2:0017".
143[01378] [20:06:26] [config_args_read ] Parsing configuration value: USBINTERFACE=2.
144[01378] [20:06:26] [parse_eval ] Command line set variable USBINTERFACE to "2".
145[01378] [20:06:26] [config_args_read ] Parsing configuration value: APN_USER=guest.
146[01378] [20:06:26] [parse_eval ] Command line set variable APN_USER to "guest".
147[01378] [20:06:26] [config_args_read ] Parsing configuration value: APN_PASS=guest.
148[01378] [20:06:26] [parse_eval ] Command line set variable APN_PASS to "guest".
149[01378] [20:06:26] [config_load ] Finished loading file /etc/sakis3g.conf.
150[01378] [20:06:26] [config_load ] Configuration file(s) loaded.
151[01378] [20:06:26] [find_display ] Not using an X display due to stick-to-console variable.
152[01378] [20:06:26] [find_gui ] Selecting GUI.
153[01378] [20:06:26] [find_gui ] terminal selected as GUI.
154[01378] [20:06:27] [translate_load ] Locale en_US.UTF-8 found in environment.
155[01378] [20:06:27] [translate_load ] Will attempt to get translation file from package: messages/en_US.UTF-8.
156[01378] [20:06:27] [need_arg ] Loaded default value for foldwrapping: 60
157[01378] [20:06:27] [translate_load ] No translations retrieved from file. Will not be using translations.
158[01378] [20:06:27] [need_arg ] Loaded default value for foldwrapping: 60
159[01378] [20:06:27] [find_binary ] Located "ifconfig" within PATH (/sbin/ifconfig).
160[01378] [20:06:27] [check_root_deps ] Root level dependencies met.
161[01378] [20:06:27] [modeswitch_load ] Loading Usb-ModeSwitch device database.
162[01378] [20:06:27] [modeswitch_load ] Embedded device database loaded.
163[01378] [20:06:27] [modeswitch_load ] Switchable devices within embedded device database:
1640421:0610 0471:1210 0471:1237 0482:024d 04e8:f000 057c:84ff 05c6:1000 05c6:2001 05c6:f000 072f:100d 0930:0d46 0ace:2011 0ace:20ff 0af0:6711 0af0:6731 0af0:6751 0af0:6771 0af0:6791 0af0:6811 0af0:6911 0af0:6951 0af0:6971 0af0:7011 0af0:7031 0af0:7051 0af0:7071 0af0:7111 0af0:7211 0af0:7251 0af0:7271 0af0:7301 0af0:7311 0af0:7361 0af0:7381 0af0:7401 0af0:7501 0af0:7601 0af0:7701 0af0:7801 0af0:7901 0af0:8200 0af0:8201 0af0:8300 0af0:8302 0af0:8304 0af0:8400 0af0:c031 0af0:c100 0af0:d013 0af0:d031 0af0:d033 0af0:d035 0af0:d055 0af0:d057 0af0:d058 0af0:d155 0af0:d157 0af0:d255 0af0:d257 0af0:d357 0b3c:c700 0fce:d0cf 0fce:d0e1 0fce:d103 1004:1000 1004:607f 1004:613a 1004:613f 1033:0035 106c:3b03 106c:3b06 1076:7f40 1199:0fff 1266:1000 12d1:1001 12d1:1003 12d1:101e 12d1:1414 12d1:1446 12d1:1520 12d1:1521 12d1:1557 1410:5010 1410:5020 1410:5030 1410:5031 1410:5041 148f:2578 16d8:6803 16d8:700a 16d8:f000 198f:bccd 19d2:0003 19d2:0026 19d2:0040 19d2:0053 19d2:0083 19d2:0101 19d2:0103 19d2:0115 19d2:1001 19d2:1007 19d2:1009 19d2:2000 19d2:fff5 19d2:fff6 1a8d:1000 1ab7:5700 1b7d:0700 1bbb:f000 1c9e:1001 1c9e:9200 1c9e:f000 1dd6:1000 1e0e:f000 1f28:0021 1fac:0130
165[01378] [20:06:27] [modeswitch_load ] Switched devices within embedded device database:
1660421:0612 0471:1206 0471:1234 04e8:6601 057c:8401 05c6:9000 072f:90cc 0930:0d45 0af0:6600 0af0:6701 0af0:6901 0b3c:c000 0b3c:c001 0b3c:c002 1004:6114 1004:6124 1004:6141 106c:3715 106c:3717 1076:7f00 1199:0017 1199:0018 1199:0019 1199:0020 1199:0021 1199:0022 1199:0024 1199:0026 1199:0027 1199:0028 1199:0029 1199:0112 1199:0120 1199:0218 1199:0220 1199:0224 1199:6802 1199:6803 1199:6804 1199:6805 1199:6808 1199:6809 1199:6812 1199:6813 1199:6815 1199:6816 1199:6820 1199:6821 1199:6822 1199:6832 1199:6833 1199:6834 1199:6835 1199:6838 1199:6839 1199:683a 1199:683b 1199:683c 1199:683d 1199:683e 1199:6850 1199:6851 1199:6852 1199:6853 1199:6855 1199:6856 1199:6859 1199:685a 1266:1002 1266:1003 1266:1004 1266:1005 1266:1006 1266:1007 1266:1008 1266:1009 1266:100a 1266:100b 1266:100c 1266:100d 1266:100e 1266:100f 1266:1011 1266:1012 12d1:1001 12d1:1003 12d1:1406 12d1:140c 12d1:141b 12d1:1464 12d1:1465 12d1:14a5 12d1:14ac 1410:4100 1410:4400 1410:6000 1410:6002 1410:7001 1410:7003 148f:9021 16d5:6502 16d8:6006 16d8:680a 198f:0220 19d2:0001 19d2:0002 19d2:0015 19d2:0016 19d2:0017 19d2:0022 19d2:0031 19d2:0037 19d2:0052 19d2:0055 19d2:0063 19d2:0064 19d2:0094 19d2:0104 19d2:0116 19d2:0124 19d2:0128 19d2:1003 19d2:1008 19d2:1010 19d2:fff1 19d2:ffff 1a8d:1002 1a8d:1009 1ab7:5731 1b7d:0001 1bbb:0000 1c9e:6061 1c9e:9000 1c9e:9063 1c9e:9202 1c9e:9603 1dbc:0005 1dd6:1002 1e0e:9000 1e0e:9200 1e0e:ce16 1e0e:cefe 1f28:0020 1fac:0131 1fe7:0100
167[01378] [20:06:27] [modeswitch_load ] Embedded Usb-ModeSwitch device database contains 260 entries.
168[01378] [20:06:27] [startup ] Finished starting up.
169[01378] [20:06:27] [need_arg ] Loaded default value for pppint: ppp0
170[01378] [20:06:27] [verbose ] Verbosing: 7% Locating device
171[01378] [20:06:27] [usb_connected_devices] Fetching connected USB devices by using "/proc/bus/usb/devices".
172[01378] [20:06:27] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
173[01378] [20:06:27] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
174[01378] [20:06:27] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
175[01378] [20:06:27] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
176[01378] [20:06:27] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.hHDWUAWK
177[01378] [20:06:27] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.EvTguJcg
178[01378] [20:06:27] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
179[01378] [20:06:27] [safe_invoke ] Method spawned with PID 2557.
180[01378] [20:06:27] [notrunning ] PID 2557 is not running any more.
181[01378] [20:06:27] [safe_invoke ] Method returned while 5 seconds were remaining.
182/-------------------------------------------------------------------------------
183[01378] [20:06:27] Will now display contents of: '/tmp/sakis3g.safe.output.1378.hHDWUAWK'
184/-------------------------------------------------------------------------------
185
186T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
187B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
188D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
189P: Vendor=1d6b ProdID=0001 Rev= 2.06
190S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
191S: Product=UHCI Host Controller
192S: SerialNumber=0000:00:1d.3
193C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
194I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
195E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
196
197T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
198D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
199P: Vendor=0eef ProdID=0001 Rev= 1.00
200S: Manufacturer=eGalax Inc.
201S: Product=Touch
202C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
203I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
204E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
205
206T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
207B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
208D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
209P: Vendor=1d6b ProdID=0001 Rev= 2.06
210S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
211S: Product=UHCI Host Controller
212S: SerialNumber=0000:00:1d.2
213C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
214I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
215E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
216
217T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
218B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
219D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
220P: Vendor=1d6b ProdID=0001 Rev= 2.06
221S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
222S: Product=UHCI Host Controller
223S: SerialNumber=0000:00:1d.1
224C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
225I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
226E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
227
228T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
229B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
230D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
231P: Vendor=1d6b ProdID=0001 Rev= 2.06
232S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
233S: Product=UHCI Host Controller
234S: SerialNumber=0000:00:1d.0
235C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
236I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
237E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
238
239T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
240D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
241P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
242S: Manufacturer=Delcom Products Inc.
243S: Product=USB IO Controller
244C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
245I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
246E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
247
248T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
249D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
250P: Vendor=0801 ProdID=0001 Rev= 1.00
251S: Manufacturer=Mag-Tek
252S: Product=USB Insert Reader
253C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
254I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
255E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
256
257T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
258B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
259D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
260P: Vendor=1d6b ProdID=0002 Rev= 2.06
261S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
262S: Product=EHCI Host Controller
263S: SerialNumber=0000:00:1d.7
264C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
265I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
266E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
267
268T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
269D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
270P: Vendor=19d2 ProdID=0017 Rev= 0.00
271S: Manufacturer=ZTE,Incorporated
272S: Product=ZTE HSPA Technologies MSM
273S: SerialNumber=P680A1ZTED010000
274C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
275I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
276E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
277E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
278I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
279E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
280E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
281I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
282E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
283E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
284E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
285I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
286E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
287E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
288E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
289I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
290E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
291E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
292\-------------------------------------------------------------------------------
293-rw------- 1 root root 4751 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.hHDWUAWK
294\-------------------------------------------------------------------------------
295/-------------------------------------------------------------------------------
296[01378] [20:06:27] Will now display contents of: '/tmp/sakis3g.safe.error.1378.EvTguJcg'
297/-------------------------------------------------------------------------------
298\-------------------------------------------------------------------------------
299-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.EvTguJcg
300\-------------------------------------------------------------------------------
301[01378] [20:06:27] [safe_invoke ] Will now route output and error to mine.
302[01378] [20:06:27] [safe_invoke ] Will attempt to unlink temporary holders.
303/-------------------------------------------------------------------------------
304[01378] [20:06:27] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.hHDWUAWK" "/tmp/sakis3g.safe.error.1378.EvTguJcg"'
305/-------------------------------------------------------------------------------
306\-------------------------------------------------------------------------------
307[01378] [20:06:27] Command returned 0.
308\-------------------------------------------------------------------------------
309[01378] [20:06:27] [safe_invoke ] Method safe_cat responded within timeout specified.
310[01378] [20:06:27] [safe_invoke ] Left safe mode.
311[01378] [20:06:27] [usb_connected_devices] Connected USB devices are:
3120801:0001:USB Insert Reader
3130eef:0001:Touch
3140fc5:b080:USB IO Controller
31519d2:0017:ZTE HSPA Technologies MSM
316[01378] [20:06:27] [usb_connected_modems] Connected USB modems are:
31719d2:0017:ZTE HSPA Technologies MSM
318[01378] [20:06:27] [user_select ] Asking user to select: MODEM Please select modem Select modem that will be used for establishing 3G connection. Select Cancel 19d2:0017 ZTE HSPA Technologies MSM OTHER Other...
319[01378] [20:06:28] [user_select ] Asking user to select: MODEM Please select modem Select modem that will be used for establishing 3G connection. Select Cancel 19d2:0017 ZTE HSPA Technologies MSM OTHER Other...
320[01378] [20:06:28] [user_select ] MODEM=19d2:2000 19d2:0017
321[01378] [20:06:28] [selection_argument ] 19d2:0017!=19d2:2000
322[01378] [20:06:28] [selection_argument ] OTHER!=19d2:2000
323[01378] [20:06:28] [selection_argument ] Not a valid option "19d2:2000".
324[01378] [20:06:28] [selection_argument ] 19d2:0017==19d2:0017.
325[01378] [20:06:28] [user_select ] User has already selected MODEM="19d2:0017". Returning 1.
326[01378] [20:06:28] [modem_setup ] Setting up modem.
327[01378] [20:06:28] [we_are_root ] We are root already. Proceeding.
328[01378] [20:06:28] [modem_setup ] Setting up USB modem 19d2:0017.
329[01378] [20:06:28] [usb_connected_devices] Fetching connected USB devices by using "/proc/bus/usb/devices".
330[01378] [20:06:28] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
331[01378] [20:06:28] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
332[01378] [20:06:28] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
333[01378] [20:06:28] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
334[01378] [20:06:28] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.qjPNVrU2
335[01378] [20:06:28] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.rHGpVuIC
336[01378] [20:06:28] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
337[01378] [20:06:28] [safe_invoke ] Method spawned with PID 2798.
338[01378] [20:06:28] [notrunning ] PID 2798 is not running any more.
339[01378] [20:06:28] [safe_invoke ] Method returned while 5 seconds were remaining.
340/-------------------------------------------------------------------------------
341[01378] [20:06:28] Will now display contents of: '/tmp/sakis3g.safe.output.1378.qjPNVrU2'
342/-------------------------------------------------------------------------------
343
344T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
345B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
346D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
347P: Vendor=1d6b ProdID=0001 Rev= 2.06
348S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
349S: Product=UHCI Host Controller
350S: SerialNumber=0000:00:1d.3
351C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
352I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
353E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
354
355T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
356D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
357P: Vendor=0eef ProdID=0001 Rev= 1.00
358S: Manufacturer=eGalax Inc.
359S: Product=Touch
360C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
361I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
362E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
363
364T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
365B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
366D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
367P: Vendor=1d6b ProdID=0001 Rev= 2.06
368S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
369S: Product=UHCI Host Controller
370S: SerialNumber=0000:00:1d.2
371C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
372I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
373E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
374
375T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
376B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
377D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
378P: Vendor=1d6b ProdID=0001 Rev= 2.06
379S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
380S: Product=UHCI Host Controller
381S: SerialNumber=0000:00:1d.1
382C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
383I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
384E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
385
386T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
387B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
388D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
389P: Vendor=1d6b ProdID=0001 Rev= 2.06
390S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
391S: Product=UHCI Host Controller
392S: SerialNumber=0000:00:1d.0
393C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
394I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
395E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
396
397T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
398D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
399P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
400S: Manufacturer=Delcom Products Inc.
401S: Product=USB IO Controller
402C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
403I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
404E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
405
406T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
407D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
408P: Vendor=0801 ProdID=0001 Rev= 1.00
409S: Manufacturer=Mag-Tek
410S: Product=USB Insert Reader
411C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
412I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
413E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
414
415T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
416B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
417D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
418P: Vendor=1d6b ProdID=0002 Rev= 2.06
419S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
420S: Product=EHCI Host Controller
421S: SerialNumber=0000:00:1d.7
422C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
423I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
424E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
425
426T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
427D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
428P: Vendor=19d2 ProdID=0017 Rev= 0.00
429S: Manufacturer=ZTE,Incorporated
430S: Product=ZTE HSPA Technologies MSM
431S: SerialNumber=P680A1ZTED010000
432C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
433I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
434E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
435E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
436I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
437E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
438E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
439I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
440E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
441E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
442E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
443I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
444E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
445E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
446E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
447I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
448E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
449E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
450\-------------------------------------------------------------------------------
451-rw------- 1 root root 4751 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.qjPNVrU2
452\-------------------------------------------------------------------------------
453/-------------------------------------------------------------------------------
454[01378] [20:06:28] Will now display contents of: '/tmp/sakis3g.safe.error.1378.rHGpVuIC'
455/-------------------------------------------------------------------------------
456\-------------------------------------------------------------------------------
457-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.rHGpVuIC
458\-------------------------------------------------------------------------------
459[01378] [20:06:28] [safe_invoke ] Will now route output and error to mine.
460[01378] [20:06:28] [safe_invoke ] Will attempt to unlink temporary holders.
461/-------------------------------------------------------------------------------
462[01378] [20:06:28] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.qjPNVrU2" "/tmp/sakis3g.safe.error.1378.rHGpVuIC"'
463/-------------------------------------------------------------------------------
464\-------------------------------------------------------------------------------
465[01378] [20:06:28] Command returned 0.
466\-------------------------------------------------------------------------------
467[01378] [20:06:28] [safe_invoke ] Method safe_cat responded within timeout specified.
468[01378] [20:06:28] [safe_invoke ] Left safe mode.
469[01378] [20:06:28] [usb_connected_devices] Connected USB devices are:
4700801:0001:USB Insert Reader
4710eef:0001:Touch
4720fc5:b080:USB IO Controller
47319d2:0017:ZTE HSPA Technologies MSM
474[01378] [20:06:28] [usb_usable_interfaces] Using information of /proc/bus/usb/devices to determine usable interfaces.
475[01378] [20:06:28] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
476[01378] [20:06:28] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
477[01378] [20:06:28] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
478[01378] [20:06:28] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
479[01378] [20:06:28] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.mdwntAsH
480[01378] [20:06:28] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.ywmYuEKw
481[01378] [20:06:28] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
482[01378] [20:06:28] [safe_invoke ] Method spawned with PID 2897.
483[01378] [20:06:28] [notrunning ] PID 2897 is not running any more.
484[01378] [20:06:28] [safe_invoke ] Method returned while 5 seconds were remaining.
485/-------------------------------------------------------------------------------
486[01378] [20:06:28] Will now display contents of: '/tmp/sakis3g.safe.output.1378.mdwntAsH'
487/-------------------------------------------------------------------------------
488
489T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
490B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
491D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
492P: Vendor=1d6b ProdID=0001 Rev= 2.06
493S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
494S: Product=UHCI Host Controller
495S: SerialNumber=0000:00:1d.3
496C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
497I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
498E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
499
500T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
501D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
502P: Vendor=0eef ProdID=0001 Rev= 1.00
503S: Manufacturer=eGalax Inc.
504S: Product=Touch
505C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
506I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
507E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
508
509T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
510B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
511D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
512P: Vendor=1d6b ProdID=0001 Rev= 2.06
513S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
514S: Product=UHCI Host Controller
515S: SerialNumber=0000:00:1d.2
516C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
517I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
518E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
519
520T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
521B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
522D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
523P: Vendor=1d6b ProdID=0001 Rev= 2.06
524S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
525S: Product=UHCI Host Controller
526S: SerialNumber=0000:00:1d.1
527C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
528I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
529E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
530
531T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
532B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
533D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
534P: Vendor=1d6b ProdID=0001 Rev= 2.06
535S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
536S: Product=UHCI Host Controller
537S: SerialNumber=0000:00:1d.0
538C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
539I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
540E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
541
542T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
543D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
544P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
545S: Manufacturer=Delcom Products Inc.
546S: Product=USB IO Controller
547C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
548I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
549E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
550
551T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
552D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
553P: Vendor=0801 ProdID=0001 Rev= 1.00
554S: Manufacturer=Mag-Tek
555S: Product=USB Insert Reader
556C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
557I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
558E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
559
560T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
561B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
562D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
563P: Vendor=1d6b ProdID=0002 Rev= 2.06
564S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
565S: Product=EHCI Host Controller
566S: SerialNumber=0000:00:1d.7
567C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
568I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
569E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
570
571T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
572D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
573P: Vendor=19d2 ProdID=0017 Rev= 0.00
574S: Manufacturer=ZTE,Incorporated
575S: Product=ZTE HSPA Technologies MSM
576S: SerialNumber=P680A1ZTED010000
577C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
578I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
579E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
580E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
581I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
582E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
583E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
584I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
585E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
586E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
587E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
588I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
589E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
590E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
591E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
592I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
593E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
594E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
595\-------------------------------------------------------------------------------
596-rw------- 1 root root 4751 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.mdwntAsH
597\-------------------------------------------------------------------------------
598/-------------------------------------------------------------------------------
599[01378] [20:06:28] Will now display contents of: '/tmp/sakis3g.safe.error.1378.ywmYuEKw'
600/-------------------------------------------------------------------------------
601\-------------------------------------------------------------------------------
602-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.ywmYuEKw
603\-------------------------------------------------------------------------------
604[01378] [20:06:28] [safe_invoke ] Will now route output and error to mine.
605[01378] [20:06:28] [safe_invoke ] Will attempt to unlink temporary holders.
606/-------------------------------------------------------------------------------
607[01378] [20:06:28] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.mdwntAsH" "/tmp/sakis3g.safe.error.1378.ywmYuEKw"'
608/-------------------------------------------------------------------------------
609\-------------------------------------------------------------------------------
610[01378] [20:06:28] Command returned 0.
611\-------------------------------------------------------------------------------
612[01378] [20:06:28] [safe_invoke ] Method safe_cat responded within timeout specified.
613[01378] [20:06:28] [safe_invoke ] Left safe mode.
614[01378] [20:06:28] [usb_usable_interfaces] USB Device 19d2:0017 provides 5 interface(s).
615[01378] [20:06:28] [usb_usable_interfaces] USB Device 19d2:0017 provides 2 interruptable endpoint(s).
616[01378] [20:06:28] [usb_usable_interfaces] Interruptable endpoint(s) are: 83 85
617[01378] [20:06:28] [usb_usable_interfaces] Added interface 2, containing endpoint 83.
618[01378] [20:06:28] [usb_usable_interfaces] Added interface 3, containing endpoint 85.
619[01378] [20:06:28] [usb_usable_interfaces] Interfaces collected from /proc/bus/usb/devices are: 2 3
620[01378] [20:06:28] [find_binary ] Located "lsusb" within PATH (/usr/sbin/lsusb).
621[01378] [20:06:28] [usb_usable_interfaces] Using information of lsusb to determine usable interfaces.
622[01378] [20:06:28] [safe_invoke ] Function safe_lsusb requested to call it in a safe manner.
623[01378] [20:06:28] [safe_invoke ] Timeout set by safe_lsusb to 5 seconds.
624[01378] [20:06:28] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
625[01378] [20:06:28] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_lsusb.
626[01378] [20:06:28] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.erz3Ppm3
627[01378] [20:06:28] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.dwhHdAYN
628[01378] [20:06:28] [safe_invoke ] Initiating safe session for safe_lsusb (5 seconds timeout).
629[01378] [20:06:28] [safe_invoke ] Method spawned with PID 3044.
630[01378] [20:06:28] [notrunning ] PID 3044 is still running.
631[01378] [20:06:28] [safe_invoke ] safe_lsusb still runs. 5 seconds before killing.
632[01378] [20:06:29] [notrunning ] PID 3044 is not running any more.
633[01378] [20:06:29] [safe_invoke ] Method returned while 4 seconds were remaining.
634/-------------------------------------------------------------------------------
635[01378] [20:06:29] Will now display contents of: '/tmp/sakis3g.safe.output.1378.erz3Ppm3'
636/-------------------------------------------------------------------------------
637
638Bus 001 Device 004: ID 19d2:0017 ONDA Communication S.p.A.
639Device Descriptor:
640 bLength 18
641 bDescriptorType 1
642 bcdUSB 2.00
643 bDeviceClass 0 (Defined at Interface level)
644 bDeviceSubClass 0
645 bDeviceProtocol 0
646 bMaxPacketSize0 64
647 idVendor 0x19d2 ONDA Communication S.p.A.
648 idProduct 0x0017
649 bcdDevice 0.00
650 iManufacturer 3 ZTE,Incorporated
651 iProduct 2 ZTE HSPA Technologies MSM
652 iSerial 4 P680A1ZTED010000
653 bNumConfigurations 1
654 Configuration Descriptor:
655 bLength 9
656 bDescriptorType 2
657 wTotalLength 138
658 bNumInterfaces 5
659 bConfigurationValue 1
660 iConfiguration 1 ZTE Configuration
661 bmAttributes 0xe0
662 Self Powered
663 Remote Wakeup
664 MaxPower 500mA
665 Interface Descriptor:
666 bLength 9
667 bDescriptorType 4
668 bInterfaceNumber 0
669 bAlternateSetting 0
670 bNumEndpoints 2
671 bInterfaceClass 255 Vendor Specific Class
672 bInterfaceSubClass 255 Vendor Specific Subclass
673 bInterfaceProtocol 255 Vendor Specific Protocol
674 iInterface 0
675 Endpoint Descriptor:
676 bLength 7
677 bDescriptorType 5
678 bEndpointAddress 0x81 EP 1 IN
679 bmAttributes 2
680 Transfer Type Bulk
681 Synch Type None
682 Usage Type Data
683 wMaxPacketSize 0x0200 1x 512 bytes
684 bInterval 32
685 Endpoint Descriptor:
686 bLength 7
687 bDescriptorType 5
688 bEndpointAddress 0x01 EP 1 OUT
689 bmAttributes 2
690 Transfer Type Bulk
691 Synch Type None
692 Usage Type Data
693 wMaxPacketSize 0x0200 1x 512 bytes
694 bInterval 32
695 Interface Descriptor:
696 bLength 9
697 bDescriptorType 4
698 bInterfaceNumber 1
699 bAlternateSetting 0
700 bNumEndpoints 2
701 bInterfaceClass 255 Vendor Specific Class
702 bInterfaceSubClass 255 Vendor Specific Subclass
703 bInterfaceProtocol 255 Vendor Specific Protocol
704 iInterface 0
705 Endpoint Descriptor:
706 bLength 7
707 bDescriptorType 5
708 bEndpointAddress 0x82 EP 2 IN
709 bmAttributes 2
710 Transfer Type Bulk
711 Synch Type None
712 Usage Type Data
713 wMaxPacketSize 0x0200 1x 512 bytes
714 bInterval 32
715 Endpoint Descriptor:
716 bLength 7
717 bDescriptorType 5
718 bEndpointAddress 0x02 EP 2 OUT
719 bmAttributes 2
720 Transfer Type Bulk
721 Synch Type None
722 Usage Type Data
723 wMaxPacketSize 0x0200 1x 512 bytes
724 bInterval 32
725 Interface Descriptor:
726 bLength 9
727 bDescriptorType 4
728 bInterfaceNumber 2
729 bAlternateSetting 0
730 bNumEndpoints 3
731 bInterfaceClass 255 Vendor Specific Class
732 bInterfaceSubClass 255 Vendor Specific Subclass
733 bInterfaceProtocol 255 Vendor Specific Protocol
734 iInterface 0
735 Endpoint Descriptor:
736 bLength 7
737 bDescriptorType 5
738 bEndpointAddress 0x83 EP 3 IN
739 bmAttributes 3
740 Transfer Type Interrupt
741 Synch Type None
742 Usage Type Data
743 wMaxPacketSize 0x0040 1x 64 bytes
744 bInterval 5
745 Endpoint Descriptor:
746 bLength 7
747 bDescriptorType 5
748 bEndpointAddress 0x84 EP 4 IN
749 bmAttributes 2
750 Transfer Type Bulk
751 Synch Type None
752 Usage Type Data
753 wMaxPacketSize 0x0200 1x 512 bytes
754 bInterval 32
755 Endpoint Descriptor:
756 bLength 7
757 bDescriptorType 5
758 bEndpointAddress 0x03 EP 3 OUT
759 bmAttributes 2
760 Transfer Type Bulk
761 Synch Type None
762 Usage Type Data
763 wMaxPacketSize 0x0200 1x 512 bytes
764 bInterval 32
765 Interface Descriptor:
766 bLength 9
767 bDescriptorType 4
768 bInterfaceNumber 3
769 bAlternateSetting 0
770 bNumEndpoints 3
771 bInterfaceClass 255 Vendor Specific Class
772 bInterfaceSubClass 255 Vendor Specific Subclass
773 bInterfaceProtocol 255 Vendor Specific Protocol
774 iInterface 0
775 Endpoint Descriptor:
776 bLength 7
777 bDescriptorType 5
778 bEndpointAddress 0x85 EP 5 IN
779 bmAttributes 3
780 Transfer Type Interrupt
781 Synch Type None
782 Usage Type Data
783 wMaxPacketSize 0x0040 1x 64 bytes
784 bInterval 5
785 Endpoint Descriptor:
786 bLength 7
787 bDescriptorType 5
788 bEndpointAddress 0x86 EP 6 IN
789 bmAttributes 2
790 Transfer Type Bulk
791 Synch Type None
792 Usage Type Data
793 wMaxPacketSize 0x0200 1x 512 bytes
794 bInterval 32
795 Endpoint Descriptor:
796 bLength 7
797 bDescriptorType 5
798 bEndpointAddress 0x04 EP 4 OUT
799 bmAttributes 2
800 Transfer Type Bulk
801 Synch Type None
802 Usage Type Data
803 wMaxPacketSize 0x0200 1x 512 bytes
804 bInterval 32
805 Interface Descriptor:
806 bLength 9
807 bDescriptorType 4
808 bInterfaceNumber 4
809 bAlternateSetting 0
810 bNumEndpoints 2
811 bInterfaceClass 8 Mass Storage
812 bInterfaceSubClass 6 SCSI
813 bInterfaceProtocol 80 Bulk (Zip)
814 iInterface 0
815 Endpoint Descriptor:
816 bLength 7
817 bDescriptorType 5
818 bEndpointAddress 0x05 EP 5 OUT
819 bmAttributes 2
820 Transfer Type Bulk
821 Synch Type None
822 Usage Type Data
823 wMaxPacketSize 0x0200 1x 512 bytes
824 bInterval 0
825 Endpoint Descriptor:
826 bLength 7
827 bDescriptorType 5
828 bEndpointAddress 0x87 EP 7 IN
829 bmAttributes 2
830 Transfer Type Bulk
831 Synch Type None
832 Usage Type Data
833 wMaxPacketSize 0x0200 1x 512 bytes
834 bInterval 0
835Device Qualifier (for other device speed):
836 bLength 10
837 bDescriptorType 6
838 bcdUSB 2.00
839 bDeviceClass 0 (Defined at Interface level)
840 bDeviceSubClass 0
841 bDeviceProtocol 0
842 bMaxPacketSize0 64
843 bNumConfigurations 1
844Device Status: 0x0000
845 (Bus Powered)
846\-------------------------------------------------------------------------------
847-rw------- 1 root root 7650 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.erz3Ppm3
848\-------------------------------------------------------------------------------
849/-------------------------------------------------------------------------------
850[01378] [20:06:29] Will now display contents of: '/tmp/sakis3g.safe.error.1378.dwhHdAYN'
851/-------------------------------------------------------------------------------
852\-------------------------------------------------------------------------------
853-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.dwhHdAYN
854\-------------------------------------------------------------------------------
855[01378] [20:06:29] [safe_invoke ] Will now route output and error to mine.
856[01378] [20:06:30] [safe_invoke ] Will attempt to unlink temporary holders.
857/-------------------------------------------------------------------------------
858[01378] [20:06:30] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.erz3Ppm3" "/tmp/sakis3g.safe.error.1378.dwhHdAYN"'
859/-------------------------------------------------------------------------------
860\-------------------------------------------------------------------------------
861[01378] [20:06:30] Command returned 0.
862\-------------------------------------------------------------------------------
863[01378] [20:06:30] [safe_invoke ] Method safe_lsusb responded within timeout specified.
864[01378] [20:06:30] [safe_invoke ] Left safe mode.
865[01378] [20:06:30] [usb_usable_interfaces] USB Device 19d2:0017 provides 2 interruptable endpoint(s).
866[01378] [20:06:30] [usb_usable_interfaces] Interfaces collected from lsusb are: 2 3
867[01378] [20:06:30] [usb_get_interface ] Collected 2 interface(s): 2 3
868[01378] [20:06:30] [base_fetch ] Loaded entries from files/usb_devices.db:
86919d2:: option
870[01378] [20:06:30] [base_drivers ] Device database indicates to use "option" driver(s) for device 19d2.
871[01378] [20:06:30] [usb_get_interface ] Config does not specify interface for device 19d2:0017.
872[01378] [20:06:30] [user_select ] Asking user to select: USBINTERFACE Please appropriate interface Select modem interface of USB device that provides modem capabilities. Select Cancel 2 Interface #2 3 Interface #3
873[01378] [20:06:30] [user_select ] Asking user to select: USBINTERFACE Please appropriate interface Select modem interface of USB device that provides modem capabilities. Select Cancel 2 Interface #2 3 Interface #3
874[01378] [20:06:30] [user_select ] USBINTERFACE=2
875[01378] [20:06:30] [selection_argument ] 2==2.
876[01378] [20:06:30] [user_select ] User has already selected USBINTERFACE="2". Returning 1.
877[01378] [20:06:30] [usb_get_interface ] Will use interface #2 of USB device "19d2:0017".
878[01378] [20:06:30] [modem_usb_detect_int] Got valid USB interface 2 of USB modem "19d2:0017".
879[01378] [20:06:30] [usb_sysfsdir ] Device 19d2:0017 sysfs dir found: /sys/bus/usb/devices/usb1/1-4
880[01378] [20:06:30] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
881[01378] [20:06:30] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
882[01378] [20:06:30] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
883[01378] [20:06:30] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
884[01378] [20:06:30] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.Bk4JBeEq
885[01378] [20:06:30] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.rjsTeinG
886[01378] [20:06:30] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
887[01378] [20:06:30] [safe_invoke ] Method spawned with PID 3347.
888[01378] [20:06:30] [notrunning ] PID 3347 is not running any more.
889[01378] [20:06:30] [safe_invoke ] Method returned while 5 seconds were remaining.
890/-------------------------------------------------------------------------------
891[01378] [20:06:30] Will now display contents of: '/tmp/sakis3g.safe.output.1378.Bk4JBeEq'
892/-------------------------------------------------------------------------------
893
894T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
895B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
896D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
897P: Vendor=1d6b ProdID=0001 Rev= 2.06
898S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
899S: Product=UHCI Host Controller
900S: SerialNumber=0000:00:1d.3
901C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
902I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
903E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
904
905T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
906D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
907P: Vendor=0eef ProdID=0001 Rev= 1.00
908S: Manufacturer=eGalax Inc.
909S: Product=Touch
910C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
911I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
912E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
913
914T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
915B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
916D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
917P: Vendor=1d6b ProdID=0001 Rev= 2.06
918S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
919S: Product=UHCI Host Controller
920S: SerialNumber=0000:00:1d.2
921C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
922I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
923E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
924
925T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
926B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
927D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
928P: Vendor=1d6b ProdID=0001 Rev= 2.06
929S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
930S: Product=UHCI Host Controller
931S: SerialNumber=0000:00:1d.1
932C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
933I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
934E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
935
936T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
937B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
938D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
939P: Vendor=1d6b ProdID=0001 Rev= 2.06
940S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
941S: Product=UHCI Host Controller
942S: SerialNumber=0000:00:1d.0
943C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
944I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
945E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
946
947T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
948D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
949P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
950S: Manufacturer=Delcom Products Inc.
951S: Product=USB IO Controller
952C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
953I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
954E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
955
956T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
957D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
958P: Vendor=0801 ProdID=0001 Rev= 1.00
959S: Manufacturer=Mag-Tek
960S: Product=USB Insert Reader
961C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
962I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
963E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
964
965T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
966B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
967D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
968P: Vendor=1d6b ProdID=0002 Rev= 2.06
969S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
970S: Product=EHCI Host Controller
971S: SerialNumber=0000:00:1d.7
972C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
973I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
974E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
975
976T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
977D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
978P: Vendor=19d2 ProdID=0017 Rev= 0.00
979S: Manufacturer=ZTE,Incorporated
980S: Product=ZTE HSPA Technologies MSM
981S: SerialNumber=P680A1ZTED010000
982C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
983I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
984E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
985E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
986I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
987E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
988E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
989I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
990E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
991E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
992E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
993I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
994E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
995E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
996E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
997I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
998E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
999E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1000\-------------------------------------------------------------------------------
1001-rw------- 1 root root 4751 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.Bk4JBeEq
1002\-------------------------------------------------------------------------------
1003/-------------------------------------------------------------------------------
1004[01378] [20:06:30] Will now display contents of: '/tmp/sakis3g.safe.error.1378.rjsTeinG'
1005/-------------------------------------------------------------------------------
1006\-------------------------------------------------------------------------------
1007-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.rjsTeinG
1008\-------------------------------------------------------------------------------
1009[01378] [20:06:30] [safe_invoke ] Will now route output and error to mine.
1010[01378] [20:06:30] [safe_invoke ] Will attempt to unlink temporary holders.
1011/-------------------------------------------------------------------------------
1012[01378] [20:06:30] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.Bk4JBeEq" "/tmp/sakis3g.safe.error.1378.rjsTeinG"'
1013/-------------------------------------------------------------------------------
1014\-------------------------------------------------------------------------------
1015[01378] [20:06:30] Command returned 0.
1016\-------------------------------------------------------------------------------
1017[01378] [20:06:30] [safe_invoke ] Method safe_cat responded within timeout specified.
1018[01378] [20:06:30] [safe_invoke ] Left safe mode.
1019[01378] [20:06:30] [usb_has_storage ] Device has storage part on interface #4.
1020[01378] [20:06:30] [usb_storage_settled ] Device 19d2:0017, provides storage interface #4.
1021[01378] [20:06:30] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
1022[01378] [20:06:30] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
1023[01378] [20:06:30] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
1024[01378] [20:06:31] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
1025[01378] [20:06:31] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.vpkxGE4b
1026[01378] [20:06:31] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.xQvAXjoV
1027[01378] [20:06:31] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
1028[01378] [20:06:31] [safe_invoke ] Method spawned with PID 3461.
1029[01378] [20:06:31] [notrunning ] PID 3461 is not running any more.
1030[01378] [20:06:31] [safe_invoke ] Method returned while 5 seconds were remaining.
1031/-------------------------------------------------------------------------------
1032[01378] [20:06:31] Will now display contents of: '/tmp/sakis3g.safe.output.1378.vpkxGE4b'
1033/-------------------------------------------------------------------------------
1034
1035T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1036B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
1037D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1038P: Vendor=1d6b ProdID=0001 Rev= 2.06
1039S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1040S: Product=UHCI Host Controller
1041S: SerialNumber=0000:00:1d.3
1042C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1043I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1044E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1045
1046T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1047D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1048P: Vendor=0eef ProdID=0001 Rev= 1.00
1049S: Manufacturer=eGalax Inc.
1050S: Product=Touch
1051C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
1052I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
1053E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1054
1055T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1056B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1057D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1058P: Vendor=1d6b ProdID=0001 Rev= 2.06
1059S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1060S: Product=UHCI Host Controller
1061S: SerialNumber=0000:00:1d.2
1062C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1063I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1064E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1065
1066T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1067B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1068D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1069P: Vendor=1d6b ProdID=0001 Rev= 2.06
1070S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1071S: Product=UHCI Host Controller
1072S: SerialNumber=0000:00:1d.1
1073C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1074I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1075E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1076
1077T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1078B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
1079D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1080P: Vendor=1d6b ProdID=0001 Rev= 2.06
1081S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1082S: Product=UHCI Host Controller
1083S: SerialNumber=0000:00:1d.0
1084C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1085I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1086E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1087
1088T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1089D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1090P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
1091S: Manufacturer=Delcom Products Inc.
1092S: Product=USB IO Controller
1093C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
1094I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
1095E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1096
1097T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
1098D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1099P: Vendor=0801 ProdID=0001 Rev= 1.00
1100S: Manufacturer=Mag-Tek
1101S: Product=USB Insert Reader
1102C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
1103I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
1104E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
1105
1106T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
1107B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
1108D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1109P: Vendor=1d6b ProdID=0002 Rev= 2.06
1110S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
1111S: Product=EHCI Host Controller
1112S: SerialNumber=0000:00:1d.7
1113C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1114I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1115E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
1116
1117T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
1118D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1119P: Vendor=19d2 ProdID=0017 Rev= 0.00
1120S: Manufacturer=ZTE,Incorporated
1121S: Product=ZTE HSPA Technologies MSM
1122S: SerialNumber=P680A1ZTED010000
1123C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
1124I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1125E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1126E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1127I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1128E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1129E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1130I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1131E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1132E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1133E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1134I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1135E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1136E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1137E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1138I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
1139E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1140E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1141\-------------------------------------------------------------------------------
1142-rw------- 1 root root 4751 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.vpkxGE4b
1143\-------------------------------------------------------------------------------
1144/-------------------------------------------------------------------------------
1145[01378] [20:06:31] Will now display contents of: '/tmp/sakis3g.safe.error.1378.xQvAXjoV'
1146/-------------------------------------------------------------------------------
1147\-------------------------------------------------------------------------------
1148-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.xQvAXjoV
1149\-------------------------------------------------------------------------------
1150[01378] [20:06:31] [safe_invoke ] Will now route output and error to mine.
1151[01378] [20:06:31] [safe_invoke ] Will attempt to unlink temporary holders.
1152/-------------------------------------------------------------------------------
1153[01378] [20:06:31] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.vpkxGE4b" "/tmp/sakis3g.safe.error.1378.xQvAXjoV"'
1154/-------------------------------------------------------------------------------
1155\-------------------------------------------------------------------------------
1156[01378] [20:06:31] Command returned 0.
1157\-------------------------------------------------------------------------------
1158[01378] [20:06:31] [safe_invoke ] Method safe_cat responded within timeout specified.
1159[01378] [20:06:31] [safe_invoke ] Left safe mode.
1160[01378] [20:06:31] [usb_storage_settled ] Storage interface #4 is binded by usb_storage driver.
1161[01378] [20:06:31] [usb_storage_settled ] User has set "killstorage" switch. Will try to unbind usb_storage driver from interface #4.
1162[01378] [20:06:31] [verbose ] Verbosing: 14% Unloading driver usb_storage
1163[01378] [20:06:31] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
1164[01378] [20:06:31] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
1165[01378] [20:06:31] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
1166[01378] [20:06:31] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
1167[01378] [20:06:31] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.T4rZD0rB
1168[01378] [20:06:31] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.2JUwV8jQ
1169[01378] [20:06:31] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
1170[01378] [20:06:31] [safe_invoke ] Method spawned with PID 3598.
1171[01378] [20:06:31] [notrunning ] PID 3598 is not running any more.
1172[01378] [20:06:31] [safe_invoke ] Method returned while 5 seconds were remaining.
1173/-------------------------------------------------------------------------------
1174[01378] [20:06:31] Will now display contents of: '/tmp/sakis3g.safe.output.1378.T4rZD0rB'
1175/-------------------------------------------------------------------------------
1176
1177T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1178B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
1179D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1180P: Vendor=1d6b ProdID=0001 Rev= 2.06
1181S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1182S: Product=UHCI Host Controller
1183S: SerialNumber=0000:00:1d.3
1184C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1185I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1186E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1187
1188T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1189D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1190P: Vendor=0eef ProdID=0001 Rev= 1.00
1191S: Manufacturer=eGalax Inc.
1192S: Product=Touch
1193C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
1194I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
1195E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1196
1197T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1198B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1199D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1200P: Vendor=1d6b ProdID=0001 Rev= 2.06
1201S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1202S: Product=UHCI Host Controller
1203S: SerialNumber=0000:00:1d.2
1204C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1205I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1206E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1207
1208T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1209B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1210D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1211P: Vendor=1d6b ProdID=0001 Rev= 2.06
1212S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1213S: Product=UHCI Host Controller
1214S: SerialNumber=0000:00:1d.1
1215C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1216I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1217E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1218
1219T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1220B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
1221D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1222P: Vendor=1d6b ProdID=0001 Rev= 2.06
1223S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1224S: Product=UHCI Host Controller
1225S: SerialNumber=0000:00:1d.0
1226C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1227I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1228E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1229
1230T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1231D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1232P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
1233S: Manufacturer=Delcom Products Inc.
1234S: Product=USB IO Controller
1235C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
1236I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
1237E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1238
1239T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
1240D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1241P: Vendor=0801 ProdID=0001 Rev= 1.00
1242S: Manufacturer=Mag-Tek
1243S: Product=USB Insert Reader
1244C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
1245I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
1246E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
1247
1248T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
1249B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
1250D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1251P: Vendor=1d6b ProdID=0002 Rev= 2.06
1252S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
1253S: Product=EHCI Host Controller
1254S: SerialNumber=0000:00:1d.7
1255C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1256I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1257E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
1258
1259T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
1260D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1261P: Vendor=19d2 ProdID=0017 Rev= 0.00
1262S: Manufacturer=ZTE,Incorporated
1263S: Product=ZTE HSPA Technologies MSM
1264S: SerialNumber=P680A1ZTED010000
1265C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
1266I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1267E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1268E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1269I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1270E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1271E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1272I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1273E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1274E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1275E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1276I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1277E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1278E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1279E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1280I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
1281E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1282E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1283\-------------------------------------------------------------------------------
1284-rw------- 1 root root 4751 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.T4rZD0rB
1285\-------------------------------------------------------------------------------
1286/-------------------------------------------------------------------------------
1287[01378] [20:06:31] Will now display contents of: '/tmp/sakis3g.safe.error.1378.2JUwV8jQ'
1288/-------------------------------------------------------------------------------
1289\-------------------------------------------------------------------------------
1290-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.2JUwV8jQ
1291\-------------------------------------------------------------------------------
1292[01378] [20:06:31] [safe_invoke ] Will now route output and error to mine.
1293[01378] [20:06:31] [safe_invoke ] Will attempt to unlink temporary holders.
1294/-------------------------------------------------------------------------------
1295[01378] [20:06:31] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.T4rZD0rB" "/tmp/sakis3g.safe.error.1378.2JUwV8jQ"'
1296/-------------------------------------------------------------------------------
1297\-------------------------------------------------------------------------------
1298[01378] [20:06:31] Command returned 0.
1299\-------------------------------------------------------------------------------
1300[01378] [20:06:31] [safe_invoke ] Method safe_cat responded within timeout specified.
1301[01378] [20:06:31] [safe_invoke ] Left safe mode.
1302[01378] [20:06:31] [module_unbind ] Module "usb_storage" is currently attached to "19d2:0017".
1303[01378] [20:06:31] [usb_sysfsdir ] Device 19d2:0017 sysfs dir found: /sys/bus/usb/devices/usb1/1-4
1304[01378] [20:06:31] [usb_sysfsdir_int ] Interface #4 sysfs dir is: /sys/bus/usb/devices/usb1/1-4/1-4:1.4
1305[01378] [20:06:31] [module_unbind ] Sent "1-4:1.4" to "/sys/bus/usb/drivers/usb-storage/unbind".
1306[01378] [20:06:31] [module_unbind ] Expecting module to detach from device.
1307[01378] [20:06:31] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
1308[01378] [20:06:31] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
1309[01378] [20:06:31] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
1310[01378] [20:06:31] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
1311[01378] [20:06:31] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.9hHxzCYX
1312[01378] [20:06:31] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.nhVEGTKX
1313[01378] [20:06:31] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
1314[01378] [20:06:31] [safe_invoke ] Method spawned with PID 3747.
1315[01378] [20:06:31] [notrunning ] PID 3747 is not running any more.
1316[01378] [20:06:31] [safe_invoke ] Method returned while 5 seconds were remaining.
1317/-------------------------------------------------------------------------------
1318[01378] [20:06:31] Will now display contents of: '/tmp/sakis3g.safe.output.1378.9hHxzCYX'
1319/-------------------------------------------------------------------------------
1320
1321T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1322B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
1323D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1324P: Vendor=1d6b ProdID=0001 Rev= 2.06
1325S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1326S: Product=UHCI Host Controller
1327S: SerialNumber=0000:00:1d.3
1328C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1329I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1330E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1331
1332T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1333D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1334P: Vendor=0eef ProdID=0001 Rev= 1.00
1335S: Manufacturer=eGalax Inc.
1336S: Product=Touch
1337C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
1338I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
1339E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1340
1341T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1342B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1343D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1344P: Vendor=1d6b ProdID=0001 Rev= 2.06
1345S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1346S: Product=UHCI Host Controller
1347S: SerialNumber=0000:00:1d.2
1348C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1349I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1350E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1351
1352T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1353B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1354D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1355P: Vendor=1d6b ProdID=0001 Rev= 2.06
1356S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1357S: Product=UHCI Host Controller
1358S: SerialNumber=0000:00:1d.1
1359C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1360I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1361E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1362
1363T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1364B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
1365D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1366P: Vendor=1d6b ProdID=0001 Rev= 2.06
1367S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1368S: Product=UHCI Host Controller
1369S: SerialNumber=0000:00:1d.0
1370C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1371I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1372E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1373
1374T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1375D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1376P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
1377S: Manufacturer=Delcom Products Inc.
1378S: Product=USB IO Controller
1379C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
1380I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
1381E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1382
1383T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
1384D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1385P: Vendor=0801 ProdID=0001 Rev= 1.00
1386S: Manufacturer=Mag-Tek
1387S: Product=USB Insert Reader
1388C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
1389I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
1390E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
1391
1392T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
1393B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
1394D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1395P: Vendor=1d6b ProdID=0002 Rev= 2.06
1396S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
1397S: Product=EHCI Host Controller
1398S: SerialNumber=0000:00:1d.7
1399C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1400I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1401E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
1402
1403T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
1404D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1405P: Vendor=19d2 ProdID=0017 Rev= 0.00
1406S: Manufacturer=ZTE,Incorporated
1407S: Product=ZTE HSPA Technologies MSM
1408S: SerialNumber=P680A1ZTED010000
1409C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
1410I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1411E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1412E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1413I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1414E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1415E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1416I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1417E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1418E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1419E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1420I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1421E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1422E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1423E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1424I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
1425E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1426E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1427\-------------------------------------------------------------------------------
1428-rw------- 1 root root 4746 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.9hHxzCYX
1429\-------------------------------------------------------------------------------
1430/-------------------------------------------------------------------------------
1431[01378] [20:06:31] Will now display contents of: '/tmp/sakis3g.safe.error.1378.nhVEGTKX'
1432/-------------------------------------------------------------------------------
1433\-------------------------------------------------------------------------------
1434-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.nhVEGTKX
1435\-------------------------------------------------------------------------------
1436[01378] [20:06:31] [safe_invoke ] Will now route output and error to mine.
1437[01378] [20:06:31] [safe_invoke ] Will attempt to unlink temporary holders.
1438/-------------------------------------------------------------------------------
1439[01378] [20:06:31] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.9hHxzCYX" "/tmp/sakis3g.safe.error.1378.nhVEGTKX"'
1440/-------------------------------------------------------------------------------
1441\-------------------------------------------------------------------------------
1442[01378] [20:06:31] Command returned 0.
1443\-------------------------------------------------------------------------------
1444[01378] [20:06:31] [safe_invoke ] Method safe_cat responded within timeout specified.
1445[01378] [20:06:31] [safe_invoke ] Left safe mode.
1446[01378] [20:06:31] [module_unbind ] Module "usb_storage" has detached from device "19d2:0017".
1447[01378] [20:06:31] [find_binary ] Located "modprobe" within PATH (/sbin/modprobe).
1448[01378] [20:06:31] [usb_storage_settled ] Storage interface has been freed as instructed.
1449[01378] [20:06:31] [usb_storage_settled ] No need to wait for storage interface to settle.
1450[01378] [20:06:31] [safe_invoke ] Function safe_cat requested to call it in a safe manner.
1451[01378] [20:06:32] [safe_invoke ] Timeout set by safe_cat to 5 seconds.
1452[01378] [20:06:32] [find_binary ] Located "mktemp" within PATH (/bin/mktemp).
1453[01378] [20:06:32] [safe_invoke ] Using /bin/mktemp to store standard output and error of safe_cat.
1454[01378] [20:06:32] [safe_invoke ] Will store output at: /tmp/sakis3g.safe.output.1378.tZjKrLAc
1455[01378] [20:06:32] [safe_invoke ] Will store error at: /tmp/sakis3g.safe.error.1378.gxQTlIUO
1456[01378] [20:06:32] [safe_invoke ] Initiating safe session for safe_cat (5 seconds timeout).
1457[01378] [20:06:32] [safe_invoke ] Method spawned with PID 3867.
1458[01378] [20:06:32] [notrunning ] PID 3867 is not running any more.
1459[01378] [20:06:32] [safe_invoke ] Method returned while 5 seconds were remaining.
1460/-------------------------------------------------------------------------------
1461[01378] [20:06:32] Will now display contents of: '/tmp/sakis3g.safe.output.1378.tZjKrLAc'
1462/-------------------------------------------------------------------------------
1463
1464T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1465B: Alloc= 14/900 us ( 2%), #Int= 1, #Iso= 0
1466D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1467P: Vendor=1d6b ProdID=0001 Rev= 2.06
1468S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1469S: Product=UHCI Host Controller
1470S: SerialNumber=0000:00:1d.3
1471C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1472I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1473E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1474
1475T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1476D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1477P: Vendor=0eef ProdID=0001 Rev= 1.00
1478S: Manufacturer=eGalax Inc.
1479S: Product=Touch
1480C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
1481I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
1482E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1483
1484T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1485B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1486D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1487P: Vendor=1d6b ProdID=0001 Rev= 2.06
1488S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1489S: Product=UHCI Host Controller
1490S: SerialNumber=0000:00:1d.2
1491C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1492I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1493E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1494
1495T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1496B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
1497D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1498P: Vendor=1d6b ProdID=0001 Rev= 2.06
1499S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1500S: Product=UHCI Host Controller
1501S: SerialNumber=0000:00:1d.1
1502C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1503I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1504E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1505
1506T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
1507B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
1508D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1509P: Vendor=1d6b ProdID=0001 Rev= 2.06
1510S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
1511S: Product=UHCI Host Controller
1512S: SerialNumber=0000:00:1d.0
1513C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1514I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1515E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
1516
1517T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
1518D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1519P: Vendor=0fc5 ProdID=b080 Rev= 0.1d
1520S: Manufacturer=Delcom Products Inc.
1521S: Product=USB IO Controller
1522C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
1523I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
1524E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
1525
1526T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
1527D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
1528P: Vendor=0801 ProdID=0001 Rev= 1.00
1529S: Manufacturer=Mag-Tek
1530S: Product=USB Insert Reader
1531C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
1532I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
1533E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
1534
1535T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
1536B: Alloc= 2/800 us ( 0%), #Int= 2, #Iso= 0
1537D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1538P: Vendor=1d6b ProdID=0002 Rev= 2.06
1539S: Manufacturer=Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
1540S: Product=EHCI Host Controller
1541S: SerialNumber=0000:00:1d.7
1542C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
1543I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
1544E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
1545
1546T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
1547D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
1548P: Vendor=19d2 ProdID=0017 Rev= 0.00
1549S: Manufacturer=ZTE,Incorporated
1550S: Product=ZTE HSPA Technologies MSM
1551S: SerialNumber=P680A1ZTED010000
1552C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
1553I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1554E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1555E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1556I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1557E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1558E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1559I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1560E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1561E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1562E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1563I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
1564E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
1565E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1566E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
1567I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
1568E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1569E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
1570\-------------------------------------------------------------------------------
1571-rw------- 1 root root 4746 2010-10-04 20:06 /tmp/sakis3g.safe.output.1378.tZjKrLAc
1572\-------------------------------------------------------------------------------
1573/-------------------------------------------------------------------------------
1574[01378] [20:06:32] Will now display contents of: '/tmp/sakis3g.safe.error.1378.gxQTlIUO'
1575/-------------------------------------------------------------------------------
1576\-------------------------------------------------------------------------------
1577-rw------- 1 root root 0 2010-10-04 20:06 /tmp/sakis3g.safe.error.1378.gxQTlIUO
1578\-------------------------------------------------------------------------------
1579[01378] [20:06:32] [safe_invoke ] Will now route output and error to mine.
1580[01378] [20:06:32] [safe_invoke ] Will attempt to unlink temporary holders.
1581/-------------------------------------------------------------------------------
1582[01378] [20:06:32] Will now run command: '/bin/rm -f "/tmp/sakis3g.safe.output.1378.tZjKrLAc" "/tmp/sakis3g.safe.error.1378.gxQTlIUO"'
1583/-------------------------------------------------------------------------------
1584\-------------------------------------------------------------------------------
1585[01378] [20:06:32] Command returned 0.
1586\-------------------------------------------------------------------------------
1587[01378] [20:06:32] [safe_invoke ] Method safe_cat responded within timeout specified.
1588[01378] [20:06:32] [safe_invoke ] Left safe mode.
1589[01378] [20:06:32] [modem_usb_fix_driver] Found already loaded driver "option".
1590[01378] [20:06:32] [modem_usb_fix_driver] Driver "option" already attached to interface #2 of device "19d2:0017".
1591[01378] [20:06:32] [verbose ] Verbosing: 21% Locating tty
1592[01378] [20:06:32] [usb_sysfsdir ] Device 19d2:0017 sysfs dir found: /sys/bus/usb/devices/usb1/1-4
1593[01378] [20:06:32] [usb_sysfsdir_int ] Interface #2 sysfs dir is: /sys/bus/usb/devices/usb1/1-4/1-4:1.2
1594[01378] [20:06:32] [usb_sysfs_locate_tty] Interface #2 tty string is: ttyUSB2/tty/ttyUSB2/dev:188:2
1595[01378] [20:06:32] [usb_sysfs_locate_tty] Will check if "/dev/ttyUSB2" exists, or will create it with major 188 and minor 2.
1596[01378] [20:06:32] [dev_create_node ] Device node "/dev/ttyUSB2" already exists.
1597[01378] [20:06:32] [usb_sysfs_locate_tty] Found tty device node of interface #2 from device "19d2:0017": /dev/ttyUSB2
1598[01378] [20:06:32] [modem_usb ] Nothing more to do for setting it up device "19d2:0017".
1599[01378] [20:06:32] [flow_setup ] Modem is now setup and resides on /dev/ttyUSB2.
1600[01378] [20:06:32] [find_binary ] Located "wvdial" within PATH (/usr/bin/wvdial).
1601[01378] [20:06:32] [find_binary ] Located "pppd" within PATH (/usr/sbin/pppd).
1602[01378] [20:06:32] [need_arg ] Loaded default value for PPPD_PEERS: /etc/ppp/peers
1603[01378] [20:06:32] [find_binary ] Located "chat" within PATH (/usr/sbin/chat).
1604[01378] [20:06:32] [verbose ] Verbosing: 28% Preparing modem
1605[01378] [20:06:32] [need_arg ] Loaded default value for CHAT_ABORT_STRINGS: ABORT BUSY ABORT ERROR ABORT BLOCKED ABORT NOCARRIER
1606[01378] [20:06:32] [at_default_commands ] Unknown command "STAGE0".
1607[01378] [20:06:32] [at_default_commands ] Command "PROBEGSM" refers to AT commands: ATI OK 'AT+GCAP' OK 'AT+CGSN' OK
1608[01378] [20:06:32] [tty_send_command ] Will send PROBEGSM commands to tty /dev/ttyUSB2: "" '\pAT' OK ATI OK 'AT+GCAP' OK 'AT+CGSN' OK '\pAT' OK
1609[01378] [20:06:32] [we_are_root ] We are root already. Proceeding.
1610[01378] [20:06:32] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1611[01378] [20:06:33] [tty_send_command ] Got response from tty:
1612AT
1613
1614
1615OK
1616
1617ATI
1618
1619
1620Manufacturer: ZTE INCORPORATED
1621
1622Model: MF668
1623
1624Revision: BD_ROGERMF668V1.0.1B03
1625
1626IMEI: 355987030960552
1627
1628+GCAP: +CGSM,+DS,+ES
1629
1630
1631
1632OK
1633
1634AT+GCAP
1635
1636
1637+GCAP: +CGSM,+DS,+ES
1638
1639
1640
1641OK
1642
1643AT+CGSN
1644
1645
1646355987030960552
1647
1648
1649
1650OK
1651
1652AT
1653
1654
1655OK
1656[01378] [20:06:33] [tty_get_caps ] Found GSM capabilities on tty /dev/ttyUSB2.
1657[01378] [20:06:33] [at_default_commands ] Command "IDENTIFY" refers to AT commands: AT+CGMM OK
1658[01378] [20:06:33] [tty_send_command ] Will send IDENTIFY commands to tty /dev/ttyUSB2: "" '\pAT' OK AT+CGMM OK '\pAT' OK
1659[01378] [20:06:33] [we_are_root ] We are root already. Proceeding.
1660[01378] [20:06:33] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1661[01378] [20:06:33] [tty_send_command ] Got response from tty:
1662AT
1663
1664
1665OK
1666
1667AT+CGMM
1668
1669
1670MF668
1671
1672
1673
1674OK
1675
1676AT
1677
1678
1679OK
1680[01378] [20:06:33] [tty_identify ] Modem on tty identified itself as: MF668
1681[01378] [20:06:33] [base_fetch ] No information found for 19d2:0017 within files/modem_init.db database.
1682[01378] [20:06:33] [at_default_commands ] Unknown command "STAGE1".
1683[01378] [20:06:33] [at_default_commands ] Using default PINCHECK.
1684[01378] [20:06:33] [at_default_commands ] Command "PINCHECK" refers to AT commands: 'AT+CPIN?' OK
1685[01378] [20:06:33] [tty_send_command ] Will send PINCHECK commands to tty /dev/ttyUSB2: "" '\pAT' OK 'AT+CPIN?' OK '\pAT' OK
1686[01378] [20:06:33] [we_are_root ] We are root already. Proceeding.
1687[01378] [20:06:33] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1688[01378] [20:06:33] [tty_send_command ] Got response from tty:
1689AT
1690
1691
1692OK
1693
1694AT+CPIN?
1695
1696
1697+CPIN: READY
1698
1699
1700
1701OK
1702
1703AT
1704
1705
1706OK
1707[01378] [20:06:34] [tty_needspin ] Modem on /dev/ttyUSB2 does not need PIN.
1708[01378] [20:06:34] [at_default_commands ] Unknown command "STAGE4".
1709[01378] [20:06:34] [at_default_commands ] Command "OPERATOR" refers to AT commands: AT+COPS=3,2 OK 'AT+COPS?' OK
1710[01378] [20:06:34] [tty_send_command ] Will send OPERATOR commands to tty /dev/ttyUSB2: "" '\pAT' OK AT+COPS=3,2 OK 'AT+COPS?' OK '\pAT' OK
1711[01378] [20:06:34] [we_are_root ] We are root already. Proceeding.
1712[01378] [20:06:34] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1713[01378] [20:06:34] [tty_send_command ] Got response from tty:
1714AT
1715
1716
1717OK
1718
1719AT+COPS=3,2
1720
1721
1722OK
1723
1724AT+COPS?
1725
1726
1727+COPS: 0,2,"302720",2
1728
1729
1730
1731OK
1732
1733AT
1734
1735
1736OK
1737[01378] [20:06:34] [tty_registered_network] Modem registered to network ID "302720".
1738[01378] [20:06:34] [at_default_commands ] Command "OPERATORNAME" refers to AT commands: AT+COPS=3,0 OK 'AT+COPS?' OK
1739[01378] [20:06:34] [tty_send_command ] Will send OPERATORNAME commands to tty /dev/ttyUSB2: "" '\pAT' OK AT+COPS=3,0 OK 'AT+COPS?' OK '\pAT' OK
1740[01378] [20:06:34] [we_are_root ] We are root already. Proceeding.
1741[01378] [20:06:34] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1742[01378] [20:06:34] [tty_send_command ] Got response from tty:
1743AT
1744
1745
1746OK
1747
1748AT+COPS=3,0
1749
1750
1751OK
1752
1753AT+COPS?
1754
1755
1756+COPS: 0,0,"CAN Rogers Wireless Inc.",2
1757
1758
1759
1760OK
1761
1762AT
1763
1764
1765OK
1766[01378] [20:06:34] [at_default_commands ] Command "SIMOPERATORNAME" refers to AT commands: 'AT+CRSM=176,28486,0,0,17' OK
1767[01378] [20:06:34] [tty_send_command ] Will send SIMOPERATORNAME commands to tty /dev/ttyUSB2: "" '\pAT' OK 'AT+CRSM=176,28486,0,0,17' OK '\pAT' OK
1768[01378] [20:06:34] [we_are_root ] We are root already. Proceeding.
1769[01378] [20:06:35] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1770[01378] [20:06:35] [tty_send_command ] Got response from tty:
1771AT
1772
1773
1774OK
1775
1776AT+CRSM=176,28486,0,0,17
1777
1778
1779+CRSM: 144,0,"00524F47455253FFFFFFFFFFFFFFFFFFFF"
1780
1781
1782
1783OK
1784
1785AT
1786
1787
1788OK
1789[01378] [20:06:35] [tty_sim_provider_name] SIM contains "service provider" name: ROGERS
1790[01378] [20:06:35] [tty_registered_network] SIM card instructs to use "ROGERS" as service provider name, instead of "CAN Rogers Wireless Inc.".
1791[01378] [20:06:35] [tty_register_network] Modem on /dev/ttyUSB2 has registered 302720.
1792[01378] [20:06:35] [at_default_commands ] Unknown command "STAGE5".
1793[01378] [20:06:35] [find_binary ] Located "hal-get-property" within PATH (/usr/bin/hal-get-property).
1794[01378] [20:06:35] [find_binary ] Located "hal-set-property" within PATH (/usr/bin/hal-set-property).
1795[01378] [20:06:35] [find_binary ] Located "hal-find-by-property" within PATH (/usr/bin/hal-find-by-property).
1796[01378] [20:06:35] [hal_tty_update ] Capabilities of /dev/ttyUSB2 are: GSM-07.07 GSM-07.05
1797[01378] [20:06:35] [hal_tty_update ] Found device in HAL: /org/freedesktop/Hal/devices/usb_device_19d2_17_P680A1ZTED010000_if2_serial_usb_0
1798[01378] [20:06:35] [verbose ] Verbosing: 35% Updating HAL
1799[01378] [20:06:35] [hal_add_to_list ] Will attempt to add "modem" inside "info.capabilities".
1800[01378] [20:06:35] [hal_add_to_list ] HAL is updated.
1801[01378] [20:06:35] [hal_add_to_list ] Will attempt to add "GSM-07.07" inside "modem.command_sets".
1802[01378] [20:06:35] [hal_add_to_list ] HAL is updated.
1803[01378] [20:06:35] [hal_add_to_list ] Will attempt to add "GSM-07.05" inside "modem.command_sets".
1804[01378] [20:06:35] [hal_add_to_list ] HAL is updated.
1805[01378] [20:06:35] [hal_tty_update ] HAL was updated that /dev/ttyUSB2 is a modem.
1806[01378] [20:06:35] [find_binary ] Located "hal-device" within PATH (/usr/bin/hal-device).
1807/-------------------------------------------------------------------------------
1808[01378] [20:06:35] Will now run command: 'hal-device "/org/freedesktop/Hal/devices/usb_device_19d2_17_P680A1ZTED010000_if2_serial_usb_0"'
1809/-------------------------------------------------------------------------------
1810udi = '/org/freedesktop/Hal/devices/usb_device_19d2_17_P680A1ZTED010000_if2_serial_usb_0'
1811 linux.hotplug_type = 2 (0x2) (int)
1812 linux.subsystem = 'tty' (string)
1813 serial.originating_device = '/org/freedesktop/Hal/devices/usb_device_19d2_17_P680A1ZTED010000_if2' (string)
1814 serial.device = '/dev/ttyUSB2' (string)
1815 serial.port = 0 (0x0) (int)
1816 serial.type = 'usb' (string)
1817 linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.2/ttyUSB2/tty/ttyUSB2' (string)
1818 info.parent = '/org/freedesktop/Hal/devices/usb_device_19d2_17_P680A1ZTED010000_if2' (string)
1819 info.subsystem = 'tty' (string)
1820 info.product = 'ZTE HSPA Technologies MSM' (string)
1821 info.udi = '/org/freedesktop/Hal/devices/usb_device_19d2_17_P680A1ZTED010000_if2_serial_usb_0' (string)
1822 info.category = 'serial' (string)
1823 info.capabilities = { 'serial', 'modem' } (string list)
1824 linux.device_file = '/dev/ttyUSB2' (string)
1825 modem.command_sets = { 'GSM-07.07', 'GSM-07.05' } (string list)
1826
1827\-------------------------------------------------------------------------------
1828[01378] [20:06:35] Command returned 0.
1829\-------------------------------------------------------------------------------
1830[01378] [20:06:35] [tty_prepare ] Modem on device node /dev/ttyUSB2 is now ready for connection.
1831[01378] [20:06:35] [flow_prepare ] Device /dev/ttyUSB2 is now prepared and registered to ROGERS.
1832[01378] [20:06:36] [verbose ] Verbosing: 42% Resolving connection details
1833[01378] [20:06:36] [base_fetch ] No information found for 302720 within files/operators.db database.
1834[01378] [20:06:36] [net_info ] ISPID: 302720 / ISPNAME: ROGERS / ISPTEXT: ROGERS
1835[01378] [20:06:36] [at_default_commands ] Command "DETECTAPN" refers to AT commands: AT+CGDCONT? OK
1836[01378] [20:06:36] [tty_send_command ] Will send DETECTAPN commands to tty /dev/ttyUSB2: "" '\pAT' OK AT+CGDCONT? OK '\pAT' OK
1837[01378] [20:06:36] [we_are_root ] We are root already. Proceeding.
1838[01378] [20:06:36] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1839[01378] [20:06:36] [tty_send_command ] Got response from tty:
1840AT
1841
1842
1843OK
1844
1845AT+CGDCONT?
1846
1847
1848+CGDCONT: 1,"IP","isp.apn","",0,0
1849
1850
1851
1852OK
1853
1854AT
1855
1856
1857OK
1858[01378] [20:06:36] [tty_detect_apn ] APN stored in modem was: isp.apn
1859[01378] [20:06:36] [user_select ] Asking user to select: APN Please select APN Select APN that best describes your connection. Contact your operator if unsure. This information, along with APN username and password, is usually easily retrieved through a fast call to customer support Select Cancel isp.apn Reported by your modem (isp.apn) CUSTOM_APN Custom APN...
1860[01378] [20:06:36] [user_select ] Asking user to select: APN Please select APN Select APN that best describes your connection. Contact your operator if unsure. This information, along with APN username and password, is usually easily retrieved through a fast call to customer support Select Cancel isp.apn Reported by your modem (isp.apn) CUSTOM_APN Custom APN...
1861[01378] [20:06:36] [user_select ] APN=isp.apn
1862[01378] [20:06:36] [selection_argument ] isp.apn==isp.apn.
1863[01378] [20:06:36] [user_select ] User has already selected APN="isp.apn". Returning 1.
1864[01378] [20:06:36] [user_prompt ] Asking user to enter: APN_USER APN: isp.apn Enter username required by APN, or leave empty to abort. Contact your operator if unsure. This information, along with APN password, is usually easily retrieved through a fast call to customer support OK Cancel
1865[01378] [20:06:36] [user_prompt ] Asking user to enter: APN_USER APN: isp.apn Enter username required by APN, or leave empty to abort. Contact your operator if unsure. This information, along with APN password, is usually easily retrieved through a fast call to customer support OK Cancel
1866[01378] [20:06:36] [user_prompt ] APN_USER=guest
1867[01378] [20:06:36] [user_prompt ] User has already entered APN_USER="guest". Returning 0.
1868[01378] [20:06:36] [user_prompt ] Asking user to enter: APN_PASS APN: isp.apn Enter password required by APN, or leave empty to abort. Contact your operator if unsure. This information is usually easily retrieved through a fast call to customer support OK Cancel
1869[01378] [20:06:37] [user_prompt ] Asking user to enter: APN_PASS APN: isp.apn Enter password required by APN, or leave empty to abort. Contact your operator if unsure. This information is usually easily retrieved through a fast call to customer support OK Cancel
1870[01378] [20:06:37] [user_prompt ] APN_PASS=guest
1871[01378] [20:06:37] [user_prompt ] User has already entered APN_PASS="guest". Returning 0.
1872[01378] [20:06:37] [at_default_commands ] Command "DIAL" refers to AT commands: ATD*99#
1873[01378] [20:06:37] [need_arg ] Loaded default value for PPPD_OPTIONS: modem crtscts -detach defaultroute dump noipdefault usepeerdns usehostname ktune logfd 2 noauth name sakis3g lock maxfail 3
1874[01378] [20:06:37] [need_arg ] Loaded default value for BAUD: 460800
1875[01378] [20:06:37] [pppd_config ] Init strings are:
1876OK 'ATD*99#'
1877[01378] [20:06:37] [pppd_config ] Config file that will be used is: "/tmp/pppd.tmp.1378".
1878/-------------------------------------------------------------------------------
1879[01378] [20:06:37] Will now display contents of: '/tmp/pppd.tmp.1378'
1880/-------------------------------------------------------------------------------
1881ABORT "NO CARRIER"
1882ABORT "NO DIALTONE"
1883ABORT "BUSY"
1884ABORT "ERROR"
1885ABORT "NO ANSWER"
1886"" ATZ
1887OK 'ATD*99#'
1888\-------------------------------------------------------------------------------
1889-rw------- 1 root root 104 2010-10-04 20:06 /tmp/pppd.tmp.1378
1890\-------------------------------------------------------------------------------
1891[01378] [20:06:37] [pppd_config ] Connection command that will be used is: /usr/bin/setsid /usr/sbin/pppd /dev/ttyUSB2 460800 modem crtscts -detach defaultroute dump noipdefault usepeerdns usehostname ktune logfd 2 noauth name sakis3g lock maxfail 3 connect "/usr/sbin/chat -v -f /tmp/pppd.tmp.1378" user "guest" password "guest"
1892[01378] [20:06:37] [verbose ] Verbosing: 49% Initializing modem
1893[01378] [20:06:37] [at_default_commands ] Using default INITIALIZE.
1894[01378] [20:06:37] [at_default_commands ] Command "INITIALIZE" refers to AT commands: ATZ OK 'AT&F' OK 'ATQ0 V1 E1' OK 'AT&D2 &C1' OK AT+FCLASS=0 OK ATS0=0 OK 'AT+CGDCONT=1,"IP","isp.apn"' OK
1895[01378] [20:06:37] [tty_send_command ] Will send INITIALIZE commands to tty /dev/ttyUSB2: "" '\pAT' OK ATZ OK 'AT&F' OK 'ATQ0 V1 E1' OK 'AT&D2 &C1' OK AT+FCLASS=0 OK ATS0=0 OK 'AT+CGDCONT=1,"IP","isp.apn"' OK '\pAT' OK
1896[01378] [20:06:37] [we_are_root ] We are root already. Proceeding.
1897[01378] [20:06:37] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1898[01378] [20:06:38] [tty_send_command ] Got response from tty:
1899AT
1900
1901
1902OK
1903
1904ATZ
1905
1906
1907OK
1908
1909AT&F
1910
1911
1912OK
1913
1914ATQ0 V1 E1
1915
1916
1917OK
1918
1919AT&D2 &C1
1920
1921
1922OK
1923
1924AT+FCLASS=0
1925
1926
1927OK
1928
1929ATS0=0
1930
1931
1932OK
1933
1934AT+CGDCONT=1,"IP","isp.apn"
1935
1936
1937OK
1938
1939AT
1940
1941
1942OK
1943[01378] [20:06:38] [at_default_commands ] Unknown command "STAGE7".
1944[01378] [20:06:38] [at_default_commands ] Unknown command "STAGE8".
1945[01378] [20:06:38] [we_are_root ] We are root already. Proceeding.
1946/-------------------------------------------------------------------------------
1947[01378] [20:06:38] Will now run command: '/bin/rm -f "/tmp/sakis3g.3gnet"'
1948/-------------------------------------------------------------------------------
1949\-------------------------------------------------------------------------------
1950[01378] [20:06:38] Command returned 0.
1951\-------------------------------------------------------------------------------
1952[01378] [20:06:38] [we_are_root ] We are root already. Proceeding.
1953[01378] [20:06:38] [tty_not_busy ] Device /dev/ttyUSB2 is not busy.
1954[01378] [20:06:38] [verbose ] Verbosing: 56% Connecting
1955[01378] [20:06:38] [notrunning ] PID 4974 is still running.
1956[01378] [20:06:38] [find_binary ] Located "netstat" within PATH (/bin/netstat).
1957[01378] [20:06:38] [ispconnect ] Waiting for interface to go up (0 seconds passed).
1958[01378] [20:06:39] [notrunning ] PID 4974 is still running.
1959[01378] [20:06:39] [ispconnect ] Waiting for interface to go up (1 seconds passed).
1960[01378] [20:06:40] [notrunning ] PID 4974 is still running.
1961[01378] [20:06:40] [ppp_slow_status ] Interface ppp0 is up.
1962[01378] [20:06:40] [ispconnect ] Waiting for interface to go up (2 seconds passed).
1963[01378] [20:06:41] [notrunning ] PID 4974 is still running.
1964[01378] [20:06:41] [ppp_slow_status ] Interface ppp0 is up.
1965[01378] [20:06:41] [ispconnect ] Waiting for interface to go up (3 seconds passed).
1966[01378] [20:06:42] [notrunning ] PID 4974 is still running.
1967[01378] [20:06:42] [ppp_slow_status ] Interface ppp0 is up.
1968[01378] [20:06:42] [ispconnect ] Waiting for interface to go up (4 seconds passed).
1969[01378] [20:06:43] [notrunning ] PID 4974 is still running.
1970[01378] [20:06:43] [ppp_slow_status ] Interface ppp0 is up.
1971[01378] [20:06:44] [ppp_slow_status ] Default route through ppp0 is established.
1972[01378] [20:06:44] [ppp_slow_status ] Really connected.
1973[01378] [20:06:44] [notrunning ] PID 4974 is still running.
1974[01378] [20:06:44] [ppp_slow_status ] Interface ppp0 is up.
1975[01378] [20:06:44] [ppp_slow_status ] Default route through ppp0 is established.
1976[01378] [20:06:44] [ppp_slow_status ] Really connected.
1977[01378] [20:06:44] [ispconnect ] Connection is established.
1978[01378] [20:06:44] [verbose ] Verbosing: 63% Fixing connection
1979[01378] [20:06:44] [flow_post_connection] Running post-connection setup.
1980[01378] [20:06:44] [find_binary ] Located "route" within PATH (/sbin/route).
1981[01378] [20:06:44] [we_are_root ] We are root already. Proceeding.
1982[01378] [20:06:44] [routing_delete_gateways] Deleting default gateway 0.0.0.0.
1983/-------------------------------------------------------------------------------
1984[01378] [20:06:44] Will now run command: '/sbin/route del default gw 0.0.0.0'
1985/-------------------------------------------------------------------------------
1986\-------------------------------------------------------------------------------
1987[01378] [20:06:44] Command returned 0.
1988\-------------------------------------------------------------------------------
1989[01378] [20:06:44] [routing_delete_gateways] Deleted all default gateways.
1990/-------------------------------------------------------------------------------
1991[01378] [20:06:44] Will now run command: '/sbin/route add default gw 10.64.64.64'
1992/-------------------------------------------------------------------------------
1993\-------------------------------------------------------------------------------
1994[01378] [20:06:44] Command returned 0.
1995\-------------------------------------------------------------------------------
1996[01378] [20:06:44] [routing_fix ] Added correct default gateway: 10.64.64.64.
1997/-------------------------------------------------------------------------------
1998[01378] [20:06:44] Will now run command: '/bin/netstat -rn'
1999/-------------------------------------------------------------------------------
2000Kernel IP routing table
2001Destination Gateway Genmask Flags MSS Window irtt Iface
200210.64.64.64 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
200310.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
2004169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
20050.0.0.0 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0
2006\-------------------------------------------------------------------------------
2007[01378] [20:06:44] Command returned 0.
2008\-------------------------------------------------------------------------------
2009[01378] [20:06:44] [dns_fix ] Checking if required to fix DNS settings.
2010/-------------------------------------------------------------------------------
2011[01378] [20:06:44] Will now display contents of: '/etc/resolv.conf'
2012/-------------------------------------------------------------------------------
2013nameserver 64.71.255.198
2014nameserver 64.71.255.253
2015\-------------------------------------------------------------------------------
2016-rw-r--r--. 1 root root 50 2010-10-04 20:06 /etc/resolv.conf
2017\-------------------------------------------------------------------------------
2018[01378] [20:06:44] [dns_fix ] No need to fix DNS servers. Skipping it.
2019[01378] [20:06:44] [ppp_slow_status ] Interface ppp0 is up.
2020[01378] [20:06:44] [ppp_slow_status ] Default route through ppp0 is established.
2021[01378] [20:06:44] [ppp_slow_status ] Really connected.
2022[01378] [20:06:44] [status_connected ] Retrieved from /tmp/sakis3g.3gnet: "302720" - "ROGERS"
2023[01378] [20:06:44] [status_connected ] Retrieved ISP ID from /tmp/sakis3g.3gnet: 302720
2024[01378] [20:06:44] [status_connected ] Also retrieved ISP name: ROGERS
2025[01378] [20:06:44] [status_connected ] Process ID 4974 is: pppd
2026[01378] [20:06:44] [status_connected ] ISPID is set to: 302720
2027[01378] [20:06:44] [status_connected ] It matches value retrieved from file.
2028[01378] [20:06:44] [base_fetch ] No information found for 302720 within files/operators.db database.
2029[01378] [20:06:44] [net_info ] ISPID: 302720 / ISPNAME: ROGERS / ISPTEXT: ROGERS
2030[01378] [20:06:44] [notify ] Notify: MF668 connected to ROGERS (302720).
2031[01378] [20:06:44] [action_command ] Following actors executed: start
2032[01378] [20:06:44] [verbose ] Verbosing: 7% Cleaning
2033[01378] [20:06:44] [stop_with ] Stopping operation with return status: 0
2034[01378] [20:06:44] [exittrap ] Now executing traps.
2035[01378] [20:06:44] [exittrap ] Executing trap "cleanscreen".
2036[01378] [20:06:44] [exittrap ]
2037>>>>>>>>> If program is paused, you may freely press Ctrl+C. <<<<<<<<<
2038>>> This happens due to DEBUG being set. Connection will NOT drop. <<<