· 6 years ago · Nov 08, 2019, 07:13 PM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.9.191-perf-g4b26646dd91f-dirty (cobalt@elements) (Android (4691093 based on r316199) clang version 6.0.2 (https://android.googlesource.com/toolchain/clang 183abd29fc496f55536e7d904e0abae47888fc7f) (https://android.googlesource.com/toolchain/llvm 34361f192e41ed6e4e8f9aca80a4ea7e9856f327) (based on LLVM 6.0.2svn)) #1 SMP PREEMPT Tue Nov 5 07:21:04 UTC 2019
3[ 0.000000] Boot CPU: AArch64 Processor [517f803c]
4[ 0.000000] Powerup reason=0x20121
5[ 0.000000] Machine: Xiaomi Technologies, Inc. Beryllium MP v2.1
6[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fa000000, size 92 MiB
7[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
8[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f9000000, size 16 MiB
9[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
10[ 0.000000] Reserved memory: created CMA memory pool at 0x00000001fb000000, size 36 MiB
11[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
12[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 16 MiB
13[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
14[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6000000, size 32 MiB
15[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
16[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 8 MiB
17[ 0.000000] OF: reserved mem: initialized node secure_sp_region, compatible id shared-dma-pool
18[ 0.000000] Reserved memory: created DMA memory pool at 0x000000008ab00000, size 20 MiB
19[ 0.000000] OF: reserved mem: initialized node qseecom_region@0x8ab00000, compatible id shared-dma-pool
20[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 5 MiB
21[ 0.000000] OF: reserved mem: initialized node camera_region@0x8bf00000, compatible id removed-dma-pool
22[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c400000, size 0 MiB
23[ 0.000000] OF: reserved mem: initialized node ips_fw_region@0x8c400000, compatible id removed-dma-pool
24[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c410000, size 0 MiB
25[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@0x8c410000, compatible id removed-dma-pool
26[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c415000, size 0 MiB
27[ 0.000000] OF: reserved mem: initialized node gpu_region@0x8c415000, compatible id removed-dma-pool
28[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c500000, size 30 MiB
29[ 0.000000] OF: reserved mem: initialized node adsp_region@0x8c500000, compatible id removed-dma-pool
30[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e300000, size 1 MiB
31[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@0x8e300000, compatible id removed-dma-pool
32[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e400000, size 120 MiB
33[ 0.000000] OF: reserved mem: initialized node modem_region@0x8e400000, compatible id removed-dma-pool
34[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095c00000, size 5 MiB
35[ 0.000000] OF: reserved mem: initialized node video_region@0x95c00000, compatible id removed-dma-pool
36[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096100000, size 8 MiB
37[ 0.000000] OF: reserved mem: initialized node cdsp_region@0x96100000, compatible id removed-dma-pool
38[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096900000, size 2 MiB
39[ 0.000000] OF: reserved mem: initialized node mba_region@0x96900000, compatible id removed-dma-pool
40[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096b00000, size 20 MiB
41[ 0.000000] OF: reserved mem: initialized node slpi_region@0x96b00000, compatible id removed-dma-pool
42[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097f00000, size 1 MiB
43[ 0.000000] OF: reserved mem: initialized node pil_spss_region@0x97f00000, compatible id removed-dma-pool
44[ 0.000000] Removed memory: created DMA memory pool at 0x00000000af000000, size 16 MiB
45[ 0.000000] OF: reserved mem: initialized node ramdump_fb_region@af000000, compatible id removed-dma-pool
46[ 0.000000] On node 0 totalpages: 1482569
47[ 0.000000] DMA zone: 6955 pages used for memmap
48[ 0.000000] DMA zone: 0 pages reserved
49[ 0.000000] DMA zone: 445097 pages, LIFO batch:31
50[ 0.000000] Normal zone: 16211 pages used for memmap
51[ 0.000000] Normal zone: 1037472 pages, LIFO batch:31
52[ 0.000000] psci: probing for conduit method from DT.
53[ 0.000000] psci: PSCIv1.1 detected in firmware.
54[ 0.000000] psci: Using standard PSCI v0.2 function IDs
55[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
56[ 0.000000] psci: SMC Calling Convention v1.0
57[ 0.000000] random: fast init done
58[ 0.000000] percpu: Embedded 23 pages/cpu s54552 r8192 d31464 u94208
59[ 0.000000] pcpu-alloc: s54552 r8192 d31464 u94208 alloc=23*4096
60[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
61[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1459403
62[ 0.000000] Kernel command line: rcupdate.rcu_expedited=1 console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xA84000 androidboot.hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 audit=0 selinux=0 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true loop.max_part=7 androidboot.usbcontroller=a600000.dwc3 root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/sde48" androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.veritymode=enforcing androidboot.bootdevice=1d84000.ufshc androidboot.serialno=d4df6fef androidboot.baseband=sdm msm_drm.dsi_display0=dsi_tianma_fhd_nt36672a_video_display: androidboot.ramdump=disable androidboot.secureboot=1 androidboot.dp=0x0 androidboot.cpuid=0xc392b249 androidboot.hwversion=4.19.0 androidboot.hwc=INDIA androidboot.cert=M1805E10A androidboot.hwlevel=MP
63[ 0.000000] audit: disabled (until reboot)
64[ 0.000000] device-mapper: init: will configure 1 devices
65[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
66[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
67[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
68[ 0.000000] software IO TLB: mapped [mem 0xf5400000-0xf5800000] (4MB)
69[ 0.000000] Memory: 5516804K/5930276K available (19966K kernel code, 3044K rwdata, 9312K rodata, 8192K init, 6198K bss, 208672K reserved, 204800K cma-reserved)
70[ 0.000000] Virtual kernel memory layout:
71[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
72[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
73[ 0.000000] .text : 0xffffff9d52480000 - 0xffffff9d53800000 ( 19968 KB)
74[ 0.000000] .rodata : 0xffffff9d53800000 - 0xffffff9d54200000 ( 10240 KB)
75[ 0.000000] .init : 0xffffff9d54200000 - 0xffffff9d54a00000 ( 8192 KB)
76[ 0.000000] .data : 0xffffff9d54a00000 - 0xffffff9d54cf9000 ( 3044 KB)
77[ 0.000000] .bss : 0xffffff9d54cf9000 - 0xffffff9d55306ad4 ( 6199 KB)
78[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
79[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
80[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
81[ 0.000000] 0xffffffbf4d000000 - 0xffffffbf52f52800 ( 95 MB actual)
82[ 0.000000] memory : 0xffffffd340000000 - 0xffffffd4bd4a0000 ( 6100 MB)
83[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
84[ 0.000000] Preemptible hierarchical RCU implementation.
85[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
86[ 0.000000] NR_IRQS:64 nr_irqs:64 0
87[ 0.000000] PDC SDM845 v2 initialized
88[ 0.000000] Offload RCU callbacks from all CPUs
89[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
90[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
91[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
92[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
93[ 0.000021] clocksource: Switched to clocksource arch_sys_counter
94[ 0.001971] Console: colour dummy device 80x25
95[ 0.001989] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
96[ 0.001998] pid_max: default: 32768 minimum: 301
97[ 0.002059] Security Framework initialized
98[ 0.002068] Yama: becoming mindful.
99[ 0.002087] SELinux: Disabled at boot.
100[ 0.002124] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
101[ 0.002131] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
102[ 0.003067] /cpus/cpu@0: Missing clock-frequency property
103[ 0.003076] /cpus/cpu@100: Missing clock-frequency property
104[ 0.003082] /cpus/cpu@200: Missing clock-frequency property
105[ 0.003089] /cpus/cpu@300: Missing clock-frequency property
106[ 0.003096] /cpus/cpu@400: Missing clock-frequency property
107[ 0.003103] /cpus/cpu@500: Missing clock-frequency property
108[ 0.003111] /cpus/cpu@600: Missing clock-frequency property
109[ 0.003119] /cpus/cpu@700: Missing clock-frequency property
110[ 0.003181] sched-energy: Sched-energy-costs installed from DT
111[ 0.003193] ASID allocator initialised with 32768 entries
112[ 0.024608] MSM Memory Dump base table set up
113[ 0.024641] MSM Memory Dump apps data table set up
114[ 0.034184] CPU1: Booted secondary processor [517f803c]
115[ 0.043177] CPU2: Booted secondary processor [517f803c]
116[ 0.052215] CPU3: Booted secondary processor [517f803c]
117[ 0.061828] CPU4: Booted secondary processor [516f802d]
118[ 0.071207] CPU5: Booted secondary processor [516f802d]
119[ 0.080746] CPU6: Booted secondary processor [516f802d]
120[ 0.090442] CPU7: Booted secondary processor [516f802d]
121[ 0.090584] Brought up 8 CPUs
122[ 0.090605] SMP: Total of 8 processors activated.
123[ 0.090610] CPU features: detected feature: GIC system register CPU interface
124[ 0.090613] CPU features: detected feature: Privileged Access Never
125[ 0.090617] CPU features: detected feature: User Access Override
126[ 0.090621] CPU features: detected feature: 32-bit EL0 Support
127[ 0.090625] CPU features: detected feature: Kernel page table isolation (KPTI)
128[ 0.140229] CPU: All CPU(s) started at EL1
129[ 0.140269] alternatives: patching kernel code
130[ 0.142035] CPU7: update max cpu_capacity 1024
131[ 0.143738] devtmpfs: initialized
132[ 0.209123] CPU0: update max cpu_capacity 1024
133[ 0.209798] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
134[ 0.209827] futex hash table entries: 2048 (order: 6, 262144 bytes)
135[ 0.214090] xor: measuring software checksum speed
136[ 0.310026] 8regs : 3415.600 MB/sec
137[ 0.410026] 8regs_prefetch: 2903.600 MB/sec
138[ 0.510024] 32regs : 3803.200 MB/sec
139[ 0.610024] 32regs_prefetch: 3285.600 MB/sec
140[ 0.610027] xor: using function: 32regs (3803.200 MB/sec)
141[ 0.610040] pinctrl core: initialized pinctrl subsystem
142[ 0.610684] NET: Registered protocol family 16
143[ 0.611738] schedtune: init normalization constants...
144[ 0.611748] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 17
145[ 0.611753] schedtune: CPU[0] min_pwr: 4 max_pwr: 160
146[ 0.611758] schedtune: CPU[1] min_pwr: 4 max_pwr: 160
147[ 0.611762] schedtune: CPU[2] min_pwr: 4 max_pwr: 160
148[ 0.611767] schedtune: CPU[3] min_pwr: 4 max_pwr: 160
149[ 0.611772] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 190
150[ 0.611777] schedtune: CPU[4] min_pwr: 10 max_pwr: 2400
151[ 0.611781] schedtune: CPU[5] min_pwr: 10 max_pwr: 2400
152[ 0.611785] schedtune: CPU[6] min_pwr: 10 max_pwr: 2400
153[ 0.611790] schedtune: CPU[7] min_pwr: 10 max_pwr: 2400
154[ 0.611793] schedtune: SYSTEM min_pwr: 58 max_pwr: 10447
155[ 0.611798] schedtune: using normalization constants mul: 2478422268 sh1: 1 sh2: 13
156[ 0.611801] schedtune: verify normalization constants...
157[ 0.611804] schedtune: max_pwr/2^0: 10389 => norm_pwr: 1024
158[ 0.611806] schedtune: max_pwr/2^1: 5194 => norm_pwr: 511
159[ 0.611809] schedtune: max_pwr/2^2: 2597 => norm_pwr: 255
160[ 0.611812] schedtune: max_pwr/2^3: 1298 => norm_pwr: 127
161[ 0.611815] schedtune: max_pwr/2^4: 649 => norm_pwr: 63
162[ 0.611817] schedtune: max_pwr/2^5: 324 => norm_pwr: 31
163[ 0.611821] schedtune: configured to support 5 boost groups
164[ 0.612540] cpuidle: using governor menu
165[ 0.613733] cpuidle: using governor qcom
166[ 0.618083] vdso: 3 pages (2 code @ ffffff9d53808000, 1 data @ ffffff9d54a04000)
167[ 0.618092] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
168[ 0.618722] DMA: preallocated 256 KiB pool for atomic allocations
169[ 0.619519] exit: IPA_USB init success!
170[ 0.650950] pstore: using zlib compression
171[ 0.651445] console [pstore-1] enabled
172[ 0.651641] pstore: Registered ramoops as persistent store backend
173[ 0.651649] ramoops: attached 0x400000@0xb0000000, ecc: 0/0
174[ 0.654344] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
175[ 0.654424] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
176[ 0.654507] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
177[ 0.654930] irq: no irq domain found for /soc/pinctrl@03400000 !
178[ 0.658269] unable to find DT imem DLOAD mode node
179[ 0.659790] unable to find DT imem EDLOAD mode node
180[ 0.661121] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
181[ 0.663065] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0x8e400000
182[ 0.663164] platform 17300000.qcom,lpass: assigned reserved memory node adsp_region@0x8c500000
183[ 0.663290] platform 5c00000.qcom,ssc: assigned reserved memory node slpi_region@0x96b00000
184[ 0.663832] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@0x97f00000
185[ 0.664054] msm_watchdog 17980000.qcom,wdt: wdog absent resource not present
186[ 0.664070] msm_watchdog 17980000.qcom,wdt: No need to allocate memory for scandumps
187[ 0.668448] msm_watchdog 17980000.qcom,wdt: MSM Watchdog Initialized
188[ 0.668521] platform 8300000.qcom,turing: assigned reserved memory node cdsp_region@0x96100000
189[ 0.668751] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
190[ 0.668943] platform aae0000.qcom,venus: assigned reserved memory node video_region@0x95c00000
191[ 0.670702] <CORE> glink_mailbox_probe: unable to create log context for [spss:mailbox]
192[ 0.678126] sps:sps is ready.
193[ 0.679021] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@0x8c400000
194[ 0.680311] platform soc:mem_dump: assigned reserved memory node mem_dump_region
195[ 0.690251] Minidump: size should be 4 byte aligned
196[ 0.690260] Failed to add entry in Minidump table
197[ 0.692950] pm8998_s9_level: supplied by pm8998_s6_level
198[ 0.692979] pm8998_s9_level: Bringing 1uV into 17-17uV
199[ 0.693102] pm8998_s9_level_ao: supplied by pm8998_s6_level_ao
200[ 0.693123] pm8998_s9_level_ao: Bringing 1uV into 17-17uV
201[ 0.700215] pm8998_l24: supplied by pm8998_l12
202[ 0.701769] pm8998_lvs1: Bringing 1uV into 1800000-1800000uV
203[ 0.702120] pm8998_lvs2: Bringing 1uV into 1800000-1800000uV
204[ 0.715607] sdm845-v2-pinctrl 3400000.pinctrl: invalid resource
205[ 0.722135] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0x8c415000
206[ 0.900088] raid6: int64x1 gen() 551 MB/s
207[ 1.070035] raid6: int64x1 xor() 742 MB/s
208[ 1.240038] raid6: int64x2 gen() 1046 MB/s
209[ 1.410052] raid6: int64x2 xor() 1037 MB/s
210[ 1.580057] raid6: int64x4 gen() 1549 MB/s
211[ 1.750036] raid6: int64x4 xor() 1142 MB/s
212[ 1.920056] raid6: int64x8 gen() 1627 MB/s
213[ 2.090029] raid6: int64x8 xor() 1126 MB/s
214[ 2.260042] raid6: neonx1 gen() 1105 MB/s
215[ 2.430036] raid6: neonx1 xor() 1413 MB/s
216[ 2.600058] raid6: neonx2 gen() 1925 MB/s
217[ 2.770041] raid6: neonx2 xor() 1708 MB/s
218[ 2.940042] raid6: neonx4 gen() 2241 MB/s
219[ 3.110037] raid6: neonx4 xor() 1738 MB/s
220[ 3.280045] raid6: neonx8 gen() 2572 MB/s
221[ 3.450027] raid6: neonx8 xor() 1792 MB/s
222[ 3.450034] raid6: using algorithm neonx8 gen() 2572 MB/s
223[ 3.450038] raid6: .... xor() 1792 MB/s, rmw enabled
224[ 3.450042] raid6: using intx1 recovery algorithm
225[ 3.455480] gpu_cx_gdsc: supplied by pm8998_s9_level
226[ 3.459088] clk: cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac6f000.qcom,bps
227[ 3.459276] clk: cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac6f000.qcom,bps
228[ 3.459447] clk: cam_cc_cci_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac4a000.qcom,cci
229[ 3.459559] clk: cam_cc_cci_clk_src: set OPP pair(100000000 Hz: 257 uV) on ac4a000.qcom,cci
230[ 3.459740] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac65000.qcom,csiphy
231[ 3.459808] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac65000.qcom,csiphy
232[ 3.459970] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac66000.qcom,csiphy
233[ 3.460080] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac66000.qcom,csiphy
234[ 3.460232] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac67000.qcom,csiphy
235[ 3.460312] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac67000.qcom,csiphy
236[ 3.460495] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
237[ 3.460572] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac68000.qcom,csiphy
238[ 3.461057] clk: cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac00000.qcom,a5
239[ 3.461203] clk: cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
240[ 3.461509] clk: cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on acaf000.qcom,vfe0
241[ 3.461697] clk: cam_cc_ife_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acaf000.qcom,vfe0
242[ 3.461934] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb3000.qcom,csid0
243[ 3.462046] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acb3000.qcom,csid0
244[ 3.462354] clk: cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb6000.qcom,vfe1
245[ 3.462549] clk: cam_cc_ife_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb6000.qcom,vfe1
246[ 3.462815] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acba000.qcom,csid1
247[ 3.462944] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acba000.qcom,csid1
248[ 3.463226] clk: cam_cc_ife_lite_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc4000.qcom,vfe-lite
249[ 3.463428] clk: cam_cc_ife_lite_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite
250[ 3.463720] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc8000.qcom,csid-lite
251[ 3.463851] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acc8000.qcom,csid-lite
252[ 3.464310] clk: cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac87000.qcom,ipe0
253[ 3.464561] clk: cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac87000.qcom,ipe0
254[ 3.465069] clk: cam_cc_ipe_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac91000.qcom,ipe1
255[ 3.465299] clk: cam_cc_ipe_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac91000.qcom,ipe1
256[ 3.468240] cam_cc-sdm845 ad00000.qcom,camcc: Registered Camera CC clocks
257[ 3.469659] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
258[ 3.470805] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
259[ 3.472828] disp_cc-sdm845 af00000.qcom,dispcc: Registered Display CC clocks
260[ 3.495541] gcc-sdm845 100000.qcom,gcc: Registered GCC clocks
261[ 3.496547] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
262[ 3.496770] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(710000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
263[ 3.496841] gfxcc-sdm845 5090000.qcom,gfxcc: Registered GFX CC clocks
264[ 3.498384] clk: gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
265[ 3.498458] clk: gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 506a000.qcom,gmu
266[ 3.498647] gpu_cc-sdm845 5090000.qcom,gpucc: Registered GPU CC clocks
267[ 3.499845] video_cc-sdm845 ab00000.qcom,videocc: Registered Video CC clocks
268[ 3.500876] KPI: Bootloader start count = 64484
269[ 3.500882] KPI: Bootloader end count = 87371
270[ 3.500886] KPI: Bootloader display count = 255830528
271[ 3.500891] KPI: Bootloader load kernel count = 1342
272[ 3.500898] KPI: Kernel MPM timestamp = 209700
273[ 3.500902] KPI: Kernel MPM Clock frequency = 32768
274[ 3.500927] socinfo_print: v0.15, id=321, ver=2.1, raw_id=139, raw_ver=2, hw_plat=60, hw_plat_ver=1638400
275 accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=3 serial_number=3281171017 num_pmics=3 chip_family=0x4f raw_device_family=0x6 raw_device_number=0x0 nproduct_id=0x3f4 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0x6 ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
276[ 3.501002] Minidump: Enabled with max number of regions 200
277[ 3.501006] msm_bus_fabric_rpmh_init_driver
278[ 3.501226] msm_bus: Probe started
279[ 3.501810] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
280[ 3.501867] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
281[ 3.501882] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
282[ 3.501943] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
283[ 3.504271] msm_bus: DT Parsing complete
284[ 3.507303] msm_bus_fab_init_noc_ops: Invalid Bus type
285[ 3.507468] msm_bus_fab_init_noc_ops: Invalid Bus type
286[ 3.507513] msm_bus_fab_init_noc_ops: Invalid Bus type
287[ 3.507681] msm_bus_fab_init_noc_ops: Invalid Bus type
288[ 3.518826] camera_iovdd_ldo: supplied by pm8998_s4
289[ 3.519176] actuator_rear_regulator: supplied by pmi8998_bob
290[ 3.528346] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
291[ 3.529334] arm-smmu 5040000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property)
292[ 3.529458] arm-smmu 5040000.arm,smmu-kgsl: stream matching with 5 register groups, mask 0x7
293[ 3.529626] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
294[ 3.532368] register_client_adhoc:find path.src 139 dest 627
295[ 3.532603] register_client_adhoc:Client handle 1 apps_smmu
296[ 3.532816] arm-smmu 15000000.apps-smmu: (IDR0.CTTW overridden by dma-coherent property)
297[ 3.532926] arm-smmu 15000000.apps-smmu: stream matching with 76 register groups, mask 0x7fff
298[ 3.533674] arm-smmu 15000000.apps-smmu: found 64 context interrupt(s) but have 45 context banks. assuming 45 context interrupts.
299[ 3.534252] register_client_adhoc:find path.src 139 dest 627
300[ 3.534408] register_client_adhoc:Client handle 2 apps_smmu
301[ 3.534640] register_client_adhoc:find path.src 139 dest 627
302[ 3.534775] register_client_adhoc:Client handle 3 apps_smmu
303[ 3.534980] register_client_adhoc:find path.src 22 dest 773
304[ 3.535065] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
305[ 3.535256] register_client_adhoc:find path.src 22 dest 773
306[ 3.535332] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu
307[ 3.535529] register_client_adhoc:find path.src 137 dest 772
308[ 3.535602] register_client_adhoc:Client handle 6 mnoc_sf_0_tbu
309[ 3.535746] register_client_adhoc:find path.src 139 dest 627
310[ 3.535891] register_client_adhoc:Client handle 7 apps_smmu
311[ 3.536085] register_client_adhoc:find path.src 139 dest 627
312[ 3.536216] register_client_adhoc:Client handle 8 apps_smmu
313[ 3.536416] register_client_adhoc:find path.src 139 dest 627
314[ 3.536550] register_client_adhoc:Client handle 9 apps_smmu
315[ 3.537488] iommu: Adding device ae00000.qcom,mdss_mdp to group 0
316[ 3.537665] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 1
317[ 3.537826] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 2
318[ 3.538020] iommu: Adding device 1de0000.qcedev to group 3
319[ 3.538181] iommu: Adding device 1de0000.qcrypto to group 4
320[ 3.538339] iommu: Adding device 18800000.qcom,icnss to group 5
321[ 3.538498] iommu: Adding device 800000.qcom,gpi-dma to group 6
322[ 3.538654] iommu: Adding device a00000.qcom,gpi-dma to group 7
323[ 3.538813] iommu: Adding device 88a7000.msm_tspp to group 8
324[ 3.538979] iommu: Adding device soc:apps_iommu_test_device to group 8
325[ 3.539125] iommu: Adding device soc:apps_iommu_coherent_test_device to group 8
326[ 3.539313] iommu: Adding device soc:qcom,msm-audio-ion to group 9
327[ 3.539472] iommu: Adding device a600000.ssusb to group 10
328[ 3.539631] iommu: Adding device soc:usb_audio_qmi_dev to group 11
329[ 3.541125] vgaarb: loaded
330[ 3.541335] SCSI subsystem initialized
331[ 3.541481] usbcore: registered new interface driver usbfs
332[ 3.541511] usbcore: registered new interface driver hub
333[ 3.541630] usbcore: registered new device driver usb
334[ 3.542237] soc:usb_nop_phy supply vcc not found, using dummy regulator
335[ 3.542636] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
336[ 3.542668] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
337[ 3.542857] input: qpnp_pon as /devices/virtual/input/input0
338[ 3.543768] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8005@4:qcom,power-on@800: No PON config. specified
339[ 3.543826] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8005@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
340[ 3.543855] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8005@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from GP1 (Keypad_Reset1)
341[ 3.543920] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
342[ 3.543976] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
343[ 3.544004] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
344[ 3.544393] media: Linux media interface: v0.10
345[ 3.544419] Linux video capture interface: v2.00
346[ 3.557628] Unable to get pmic_revid rc=-22
347[ 3.559468] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
348[ 3.559706] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x8ab00000
349[ 3.559804] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
350[ 3.559886] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node secure_sp_region
351[ 3.559965] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
352[ 3.560349] ION heap system created
353[ 3.560495] ION heap adsp created at 0x00000000f9000000 with size 1000000
354[ 3.560507] ION heap qsecom created at 0x000000008ab00000 with size 1400000
355[ 3.560517] ION heap qsecom_ta created at 0x00000000f8000000 with size 1000000
356[ 3.560528] ION heap spss created at 0x00000000f5800000 with size 800000
357[ 3.560539] ION heap secure_display created at 0x00000000fa000000 with size 5c00000
358[ 3.560551] ION heap secure_heap created
359[ 3.561278] ipa ipa3_tz_unlock_reg:4882 Bad parameters
360[ 3.561289] ipa ipa3_pre_init:5082 Failed to unlock memory region using TZ
361[ 3.561471] register_client_adhoc:find path.src 90 dest 512
362[ 3.561959] register_client_adhoc:find path.src 90 dest 585
363[ 3.562091] register_client_adhoc:find path.src 1 dest 676
364[ 3.562324] register_client_adhoc:find path.src 143 dest 777
365[ 3.562394] register_client_adhoc:Client handle 10 ipa
366[ 3.562846] ipa ipa3_uc_state_check:284 uC interface not initialized
367[ 3.563606] ipa ipa3_uc_state_check:284 uC interface not initialized
368[ 3.564186] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 12
369[ 3.564436] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 13
370[ 3.564688] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 14
371[ 3.565535] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
372[ 3.565658] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
373[ 3.565783] PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
374[ 3.567083] Advanced Linux Sound Architecture Driver Initialized.
375[ 3.567964] Bluetooth: Core ver 2.22
376[ 3.567987] NET: Registered protocol family 31
377[ 3.567992] Bluetooth: HCI device and connection manager initialized
378[ 3.568004] Bluetooth: HCI socket layer initialized
379[ 3.568013] Bluetooth: L2CAP socket layer initialized
380[ 3.568040] Bluetooth: SCO socket layer initialized
381[ 3.568411] NetLabel: Initializing
382[ 3.568418] NetLabel: domain hash size = 128
383[ 3.568422] NetLabel: protocols = UNLABELED CIPSOv4
384[ 3.568467] NetLabel: unlabeled traffic allowed by default
385[ 3.568592] pcie:pcie_init.
386[ 3.572801] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
387[ 3.573124] gpu_gx_gdsc: supplied by pm8005_s1_level
388[ 3.574728] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu0
389[ 3.575340] clk: add_opp: Set OPP pair (1766400000 Hz, 820000 uv) on cpu0
390[ 3.575391] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu1
391[ 3.575977] clk: add_opp: Set OPP pair (1766400000 Hz, 820000 uv) on cpu1
392[ 3.576043] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu2
393[ 3.576625] clk: add_opp: Set OPP pair (1766400000 Hz, 820000 uv) on cpu2
394[ 3.576675] clk: add_opp: Set OPP pair (300000000 Hz, 600000 uv) on cpu3
395[ 3.577232] clk: add_opp: Set OPP pair (1766400000 Hz, 820000 uv) on cpu3
396[ 3.577293] clk: add_opp: Set OPP pair (825600000 Hz, 620000 uv) on cpu4
397[ 3.578125] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu4
398[ 3.578184] clk: add_opp: Set OPP pair (825600000 Hz, 620000 uv) on cpu5
399[ 3.579050] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu5
400[ 3.579109] clk: add_opp: Set OPP pair (825600000 Hz, 620000 uv) on cpu6
401[ 3.579984] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu6
402[ 3.580089] clk: add_opp: Set OPP pair (825600000 Hz, 620000 uv) on cpu7
403[ 3.580990] clk: add_opp: Set OPP pair (2803200000 Hz, 1080000 uv) on cpu7
404[ 3.581300] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on soc:qcom,l3-cpu0
405[ 3.581306] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on soc:qcom,l3-cpu4
406[ 3.581311] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on soc:qcom,l3-cdsp
407[ 3.581317] clk: add_opp: Set OPP pair (300000000 Hz, 608000 uv) on 5000000.qcom,kgsl-3d0
408[ 3.583020] clk: add_opp: Set OPP pair (1478400000 Hz, 840000 uv) on soc:qcom,l3-cpu0
409[ 3.583026] clk: add_opp: Set OPP pair (1478400000 Hz, 840000 uv) on soc:qcom,l3-cpu4
410[ 3.583031] clk: add_opp: Set OPP pair (1478400000 Hz, 840000 uv) on soc:qcom,l3-cdsp
411[ 3.583036] clk: add_opp: Set OPP pair (1478400000 Hz, 840000 uv) on 5000000.qcom,kgsl-3d0
412[ 3.583981] cpufreq: driver osm-cpufreq up and running
413[ 3.583988] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
414[ 3.584038] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
415[ 3.586535] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=65 power_d0=21] -> [freq=1766400 cap=381 power_d0=160]
416[ 3.586543] CPU0: update cpu_capacity 381
417[ 3.586550] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=65 power_d0=21] -> [freq=1766400 cap=381 power_d0=160]
418[ 3.586555] CPU1: update cpu_capacity 381
419[ 3.586563] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=65 power_d0=21] -> [freq=1766400 cap=381 power_d0=160]
420[ 3.586568] CPU2: update cpu_capacity 381
421[ 3.586576] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=65 power_d0=21] -> [freq=1766400 cap=381 power_d0=160]
422[ 3.586580] CPU3: update cpu_capacity 381
423[ 3.586591] sched-energy energy-costs: cpu=4 eff=1740 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
424[ 3.586596] CPU4: update cpu_capacity 1024
425[ 3.586604] sched-energy energy-costs: cpu=5 eff=1740 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
426[ 3.586609] CPU5: update cpu_capacity 1024
427[ 3.586619] sched-energy energy-costs: cpu=6 eff=1740 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
428[ 3.586624] CPU6: update cpu_capacity 1024
429[ 3.586633] sched-energy energy-costs: cpu=7 eff=1740 [freq=300000 cap=110 power_d0=90] -> [freq=2803200 cap=1024 power_d0=2400]
430[ 3.586638] CPU7: update cpu_capacity 1024
431[ 3.587858] sched-energy energy-costs: Sched-energy-costs capacity updated
432[ 3.587905] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
433[ 3.588200] clocksource: Switched to clocksource arch_sys_counter
434[ 3.590045] CPU3: update max cpu_capacity 381
435[ 3.604657] CPU5: update max cpu_capacity 1024
436[ 3.604686] VFS: Disk quotas dquot_6.6.0
437[ 3.604729] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
438[ 3.605271] debugcc-sdm845 soc:qcom,cc-debug@100000: Registered debug mux successfully
439[ 3.605920] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
440[ 3.605925] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
441[ 3.605991] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
442[ 3.605997] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
443[ 3.606002] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
444[ 3.606006] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
445[ 3.606011] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
446[ 3.606379] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
447[ 3.606405] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
448[ 3.606409] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
449[ 3.606440] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
450[ 3.606445] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
451[ 3.606449] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
452[ 3.606454] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
453[ 3.606459] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
454[ 3.616791] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=1, clocks successfully
455[ 3.616811] mdss_pll_probe: MDSS pll label = MDSS DP PLL
456[ 3.623875] NET: Registered protocol family 2
457[ 3.624136] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
458[ 3.624290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
459[ 3.624559] TCP: Hash tables configured (established 65536 bind 65536)
460[ 3.624602] UDP hash table entries: 4096 (order: 5, 131072 bytes)
461[ 3.624638] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
462[ 3.624770] NET: Registered protocol family 1
463[ 3.625109] RPC: Registered named UNIX socket transport module.
464[ 3.625112] RPC: Registered udp transport module.
465[ 3.625115] RPC: Registered tcp transport module.
466[ 3.625118] RPC: Registered tcp NFSv4.1 backchannel transport module.
467[ 3.625124] PCI: CLS 0 bytes, default 128
468[ 3.625194] reg-fixed-voltage vendor:ext_5v_boost: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pmi8998@2/pinctrl@c000/usb2_ext_5v_boost/usb2_ext_5v_boost_default, deferring probe
469[ 3.625440] Trying to unpack rootfs image as initramfs...
470[ 3.636191] Freeing initrd memory: 984K
471[ 3.636612] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
472[ 3.640868] workingset: timestamp_bits=46 max_order=21 bucket_order=0
473[ 3.642197] [SDFAT] Filesystem version 2.1.8
474[ 3.642532] Registering sdcardfs 0.1
475[ 3.642808] NFS: Registering the id_resolver key type
476[ 3.642825] Key type id_resolver registered
477[ 3.642827] Key type id_legacy registered
478[ 3.642834] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
479[ 3.643230] fuse init (API version 7.26)
480[ 3.643498] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
481[ 3.643501] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
482[ 3.643506] pfk [pfk_init]: Driver initialized successfully
483[ 3.647166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
484[ 3.647170] io scheduler noop registered
485[ 3.647174] io scheduler deadline registered
486[ 3.647208] io scheduler cfq registered (default)
487[ 3.657124] fb0: Virtual frame buffer device, using 3000K of video memory
488[ 3.657809] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5b00: Registered qpnp_clkdiv_1 successfully
489[ 3.657860] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5c00: Registered qpnp_clkdiv_2 successfully
490[ 3.657908] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5d00: Registered qpnp_clkdiv_3 successfully
491[ 3.664704] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
492[ 3.664808] icnss: Platform driver probed successfully
493[ 3.665363] register_client_adhoc:find path.src 125 dest 512
494[ 3.665572] register_client_adhoc:Client handle 11 scm_pas
495[ 3.665584] minidump-id not found for adsp
496[ 3.665676] minidump-id not found for slpi
497[ 3.665738] minidump-id not found for spss
498[ 3.665770] subsys-pil-tz 188101c.qcom,spss: for spss segments only will be dumped.
499[ 3.666053] minidump-id not found for cdsp
500[ 3.666310] register_client_adhoc:find path.src 63 dest 512
501[ 3.666427] register_client_adhoc:Client handle 12 pil-venus
502[ 3.666432] minidump-id not found for venus
503[ 3.666438] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
504[ 3.666613] minidump-id not found for ipa_fws
505[ 3.666618] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
506[ 3.666814] minidump-id not found for a630_zap
507[ 3.666819] subsys-pil-tz soc:qcom,kgsl-hyp: for a630_zap segments only will be dumped.
508[ 3.667254] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
509[ 3.669060] msm_geni_serial 898000.qcom,qup_uart: Wakeup byte 0xfd
510[ 3.669086] msm_geni_serial 898000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
511[ 3.669159] 898000.qcom,qup_uart: ttyHS0 at MMIO 0x898000 (irq = 8, base_baud = 0) is a MSM
512[ 3.669357] msm_geni_serial_init: Driver initialized
513[ 3.669515] register_client_adhoc:find path.src 1 dest 618
514[ 3.669633] register_client_adhoc:Client handle 13 msm-rng-noc
515[ 3.671424] random: crng init done
516[ 3.675876] [drm] Initialized
517[ 3.675946] register_client_adhoc:find path.src 20003 dest 20515
518[ 3.676004] register_client_adhoc:find path.src 20004 dest 20515
519[ 3.676045] register_client_adhoc:Client handle 14 disp_rsc_mnoc
520[ 3.676059] register_client_adhoc:find path.src 20001 dest 20513
521[ 3.676101] register_client_adhoc:Client handle 15 disp_rsc_llcc
522[ 3.676114] register_client_adhoc:find path.src 20000 dest 20512
523[ 3.676156] register_client_adhoc:Client handle 16 disp_rsc_ebi
524[ 3.676240] [sde_rsc_hw:rsc_hw_init:679]: sde rsc init successfully done
525[ 3.676250] [sde_rsc:sde_rsc_probe:1416]: sde rsc index:0 probed successfully
526[ 3.676422] dsi_phy ae94400.qcom,mdss_dsi_phy0: failed to get memory resource: dyn_refresh_base
527[ 3.676465] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
528[ 3.676479] dsi_phy ae96400.qcom,mdss_dsi_phy0: failed to get memory resource: dyn_refresh_base
529[ 3.676523] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
530[ 3.676829] AXI: get_pdata(): Error: Client name not found
531[ 3.676832] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
532[ 3.676836] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
533[ 3.676897] AXI: get_pdata(): Error: Client name not found
534[ 3.676900] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
535[ 3.676903] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-1
536[ 3.678048] msm-dsi-panel:[dsi_panel_get:3558] [LCD]dsi_panel_get: on_cmds_tuning = 0.
537[ 3.678065] msm-dsi-panel:[dsi_panel_parse_triggers:1384] [tianma fhd video dsi panel] fallback to default te-pin-select
538[ 3.678116] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2197] RESET SEQ LENGTH = 16
539[ 3.678128] msm-dsi-panel:[dsi_panel_parse_misc_features:2246] dsi_panel_parse_misc_features: ulps feature enabled
540[ 3.678132] msm-dsi-panel:[dsi_panel_parse_misc_features:2252] dsi_panel_parse_misc_features: ulps during suspend feature enabled
541[ 3.678160] msm-dsi-panel:[dsi_panel_parse_mi_config:3436] [LCD]dsi_panel_parse_mi_config:3436 Dispparam enabled.
542[ 3.678165] msm-dsi-panel:[dsi_panel_parse_mi_config:3449] dsi_panel_parse_mi_config:3449, Unable to read panel xy coordinate
543[ 3.678167] msm-dsi-panel:[dsi_panel_parse_mi_config:3457] 0x0 0x0 enabled:0
544[ 3.678172] msm-dsi-panel:[dsi_panel_parse_mi_config:3465] dsi_panel_parse_mi_config:3465, Unable to read panel max luminance
545[ 3.678175] msm-dsi-panel:[dsi_panel_parse_mi_config:3473] 0x0 0x0 enabled:0
546[ 3.678178] msm-dsi-panel:[dsi_panel_parse_mi_config:3481] dsi_panel_parse_mi_config:3481, Unable to read panel max luminance valid
547[ 3.678182] msm-dsi-panel:[dsi_panel_parse_mi_config:3493] dsi_panel_parse_mi_config:3493, Unable to read panel bl info
548[ 3.678188] msm-dsi-panel:[dsi_panel_parse_mi_config:3516] Panel on dimming delay 120 ms
549[ 3.678191] msm-dsi-panel:[dsi_panel_parse_mi_config:3523] default doze backlight threshold is 5
550[ 3.678194] msm-dsi-panel:[dsi_panel_get:3643] failed to parse mi config, rc=-22
551[ 3.678206] msm-dsi-display:[dsi_display_clocks_init] failed to get src_byte_clk, rc=-2
552[ 3.678801] msm-dsi-display:[dsi_display_get_boot_display] index = 0
553[ 3.678805] msm-dsi-display:[dsi_display_get_boot_display] index = 1
554[ 3.679021] register_client_adhoc:find path.src 1 dest 590
555[ 3.679135] register_client_adhoc:Client handle 17 mdss_reg
556[ 3.679153] register_client_adhoc:find path.src 22 dest 512
557[ 3.679270] register_client_adhoc:find path.src 23 dest 512
558[ 3.679377] register_client_adhoc:Client handle 18 mdss_sde
559[ 3.679422] [drm:sde_dbg_init:3490] evtlog_status: enable:0, panic:0, dump:1
560[ 3.679440] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
561[ 3.679446] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
562[ 3.679590] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_tianma_fhd_nt36672a_video_display'
563[ 3.679595] msm-dsi-display:[dsi_display_register_te_irq] Unable to register for TE IRQ
564[ 3.679601] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display@21 (ops dsi_display_comp_ops)
565[ 3.679621] [drm] mapped mdp address space @ffffff800ef00000
566[ 3.679632] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
567[ 3.679659] [drm:_sde_kms_get_splash_data:3188] found continuous splash base address:9d400000 size:2400000
568[ 3.680867] [drm:sde_kms_hw_init:3317] sde hardware revision:0x40000001
569[ 3.681642] [drm] invalid feature map 9 for feature 10
570[ 3.681648] [drm] invalid feature map 9 for feature 10
571[ 3.681655] [drm] invalid feature map 9 for feature 10
572[ 3.681661] [drm] invalid feature map 9 for feature 10
573[ 3.681792] [drm:alloc_reg_dma_buf_v1] *ERROR* failed to get aspace
574[ 3.681808] Failed to allocate reg dma, ret:18446744073709551594
575[ 3.681823] [drm] Created domain mdp_ns [80000000,80000000] secure=0
576[ 3.686066] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 15
577[ 3.686394] [drm] probing device qcom,smmu_sde_sec
578[ 3.686404] [drm] Created domain mdp_s [80000000,80000000] secure=1
579[ 3.691106] [drm:sde_connector_init:2326] sde_connector_init: Request esd irq succeed!
580[ 3.692446] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
581[ 3.692452] [drm] No driver support for vblank timestamp query.
582[ 3.693665] msm-dsi-panel:[dsi_panel_parse_topology:2990] default topology: lm: 1 comp_enc:0 intf: 1
583[ 3.693804] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3078] partial update disabled as the property is not set
584[ 3.693986] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 668 registered
585[ 3.698206] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 16
586[ 3.698420] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 17
587[ 3.699891] register_client_adhoc:find path.src 26 dest 512
588[ 3.700106] register_client_adhoc:Client handle 19 grp3d
589[ 3.700121] register_client_adhoc:find path.src 26 dest 10036
590[ 3.700221] register_client_adhoc:Client handle 20 cnoc
591[ 3.700228] query_client_usecase_all: query_start
592[ 3.700261] query_client_usecase_all: query_start
593[ 3.701595] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 18
594[ 3.701839] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 19
595[ 3.753771] brd: module loaded
596[ 3.756450] loop: module loaded
597[ 3.759195] nbd: registered device at major 43
598[ 3.761808] zram: Added device: zram0
599[ 3.763965] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
600[ 3.764008] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
601[ 3.764022] QSEECOM: qseecom_probe: no-clock-support=0x1
602[ 3.764029] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
603[ 3.764097] register_client_adhoc:find path.src 125 dest 512
604[ 3.764427] register_client_adhoc:Client handle 21 qseecom-noc
605[ 3.764528] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
606[ 3.766139] register_client_adhoc:find path.src 125 dest 512
607[ 3.766315] register_client_adhoc:Client handle 22 qcedev-noc
608[ 3.768148] qce 1de0000.qcedev: QTI Crypto 5.4.1 device found @0x1de0000
609[ 3.768160] qce 1de0000.qcedev: CE device = 0x0 IO base, CE = ffffff800e320000 Consumer (IN) PIPE 6,
610 Producer (OUT) PIPE 7 IO base BAM = 0000000000000000
611 BAM IRQ 108 Engines Availability = 0x2011073
612[ 3.768422] sps:BAM 0x0000000001dc4000 is registered.
613[ 3.768710] sps:BAM 0x0000000001dc4000 (va:0xffffff800ee80000) enabled: ver:0x27, number of pipes:16
614[ 3.769071] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 108
615[ 3.769777] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 20
616[ 3.770521] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
617[ 3.770527] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
618[ 3.770532] qcedev_setup_context_bank size:0x40000000, dev:ffffffd4ac715410, mapping:ffffffd4ac064900
619[ 3.770620] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 21
620[ 3.772463] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
621[ 3.772469] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0x60200000
622[ 3.772475] qcedev_setup_context_bank size:0x40000000, dev:ffffffd4ac715810, mapping:ffffffd4ac068280
623[ 3.773269] register_client_adhoc:find path.src 125 dest 512
624[ 3.773480] register_client_adhoc:Client handle 23 qcrypto-noc
625[ 3.774764] qcrypto 1de0000.qcrypto: QTI Crypto 5.4.1 device found @0x1de0000
626[ 3.774772] qcrypto 1de0000.qcrypto: CE device = 0x0 IO base, CE = ffffff800eec0000 Consumer (IN) PIPE 4,
627 Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
628 BAM IRQ 108 Engines Availability = 0x2011073
629[ 3.775287] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 108
630[ 3.775870] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
631[ 3.775993] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
632[ 3.776137] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
633[ 3.776257] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
634[ 3.776376] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
635[ 3.776495] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
636[ 3.776614] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
637[ 3.776733] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
638[ 3.776849] qcrypto 1de0000.qcrypto: qcrypto-sha1
639[ 3.776968] qcrypto 1de0000.qcrypto: qcrypto-sha256
640[ 3.777085] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
641[ 3.777205] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
642[ 3.777327] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
643[ 3.777443] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
644[ 3.777558] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
645[ 3.777691] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
646[ 3.777805] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
647[ 3.777923] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
648[ 3.778039] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
649[ 3.778152] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
650[ 3.779595] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
651[ 3.782168] qcom_ice_get_pdevice: found ice device ffffffd4ac66fa00
652[ 3.782173] qcom_ice_get_pdevice: matching platform device ffffffd4b2b8a400
653[ 3.782350] register_client_adhoc:find path.src 123 dest 512
654[ 3.782561] register_client_adhoc:find path.src 1 dest 757
655[ 3.782711] register_client_adhoc:Client handle 24 ufshc_mem
656[ 3.783400] scsi host0: ufshcd
657[ 3.788073] qcom_ice 1d90000.ufsice: QC ICE 3.1.75 device found @0xffffff8009d88000
658[ 3.800598] SCSI Media Changer driver v0.25
659[ 3.803529] spmi spmi-1: SPMI PMIC arbiter debug bus controller added
660[ 3.803687] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
661[ 3.804612] libphy: Fixed MDIO Bus: probed
662[ 3.804618] tun: Universal TUN/TAP device driver, 1.6
663[ 3.804623] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
664[ 3.804839] sky2: driver version 1.30
665[ 3.805061] PPP generic driver version 2.4.2
666[ 3.805168] PPP BSD Compression module registered
667[ 3.805175] PPP Deflate Compression module registered
668[ 3.805202] PPP MPPE Compression module registered
669[ 3.805209] NET: Registered protocol family 24
670[ 3.805299] CLD80211: Initializing
671[ 3.805381] usbcore: registered new interface driver asix
672[ 3.805467] usbcore: registered new interface driver ax88179_178a
673[ 3.805478] usbcore: registered new interface driver cdc_ether
674[ 3.805490] usbcore: registered new interface driver net1080
675[ 3.805505] usbcore: registered new interface driver cdc_subset
676[ 3.805516] usbcore: registered new interface driver zaurus
677[ 3.805535] usbcore: registered new interface driver cdc_ncm
678[ 3.805541] CHRDEV "uio" major number 233 goes below the dynamic allocation range
679[ 3.805953] msm_sharedmem: sharedmem_register_qmi: qmi init successful
680[ 3.811215] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
681[ 3.813288] msm-qusb-phy-v2 88e3000.qusb: pinctrl not available
682[ 3.814856] msm-dwc3 a600000.ssusb: unable to get dbm device
683[ 3.815674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
684[ 3.815689] ehci-pci: EHCI PCI platform driver
685[ 3.815712] ehci-platform: EHCI generic platform driver
686[ 3.815889] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
687[ 3.815899] ohci-pci: OHCI PCI platform driver
688[ 3.815923] ohci-platform: OHCI generic platform driver
689[ 3.816387] usbcore: registered new interface driver usb-storage
690[ 3.816404] usbcore: registered new interface driver usb_ehset_test
691[ 3.816416] usbcore: registered new interface driver lvs
692[ 3.818170] qpnp-pdphy c440000.qcom,spmi:qcom,pmi8998@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
693[ 3.818750] mousedev: PS/2 mouse device common for all mice
694[ 3.818886] [NVT-ts] nvt_driver_init 2245: start
695[ 3.818915] nvt_driver_init: finished
696[ 3.818920] [FTS]fts_ts_init: Enter
697[ 3.818929] [FTS]fts_ts_init: Exit(2142)
698[ 3.819232] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_reset
699[ 3.819239] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_active
700[ 3.819270] fpc1020 soc:fingerprint_fpc: fpc1020_probe: ok
701[ 3.819290] fpc1020_init OK
702[ 3.819298] CHRDEV "goodix_fp_spi" major number 232 goes below the dynamic allocation range
703[ 3.819374] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
704[ 3.819456] gf::irq_gpio:121
705[ 3.819600] input: uinput-goodix as /devices/virtual/input/input1
706[ 3.820207] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
707[ 3.820412] i2c /dev entries driver
708[ 3.820605] i2c_geni 88c000.i2c: Bus frequency not specified, default to 400KHz.
709[ 3.821606] i2c_geni 894000.i2c: Bus frequency not specified, default to 400KHz.
710[ 3.821777] nq-nci 1-0028: nqx_probe: probing nqxx failed, check hardware
711[ 3.821796] nq-nci: probe of 1-0028 failed with error -22
712[ 3.821988] i2c_geni a88000.i2c: Bus frequency not specified, default to 400KHz.
713[ 3.822759] i2c_geni a88000.i2c: i2c error :-107
714[ 3.822886] i2c_geni a88000.i2c: i2c error :-107
715[ 3.823009] i2c_geni a88000.i2c: i2c error :-107
716[ 3.823131] i2c_geni a88000.i2c: i2c error :-107
717[ 3.823136] I2C PMIC: i2c_pmic_read: i2c_pmic_read failed for 3 retries, rc = -107
718[ 3.823142] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107
719[ 3.823146] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107
720[ 3.823184] i2c_pmic: probe of 0-0008 failed with error -107
721[ 3.827126] PMIC@SID0: (null) v1.1 options: 0, 0, 0, 0
722[ 3.827367] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
723[ 3.827541] i2c_geni a98000.i2c: Bus frequency not specified, default to 400KHz.
724[ 3.827862] [NVT-ts] nvt_ts_probe 1614: start
725[ 3.827875] [NVT-ts] nvt_parse_dt 739: novatek,irq-gpio=31
726[ 3.827881] [NVT-ts] nvt_parse_dt 742: novatek,reset-gpio=32
727[ 3.827888] [NVT-ts] nvt_parse_dt 745: novatek,reset-tddi=6
728[ 3.827892] [NVT-ts] nvt_parse_dt 754: vddio_reg_name = vddio
729[ 3.827897] [NVT-ts] nvt_parse_dt 764: lab_reg_name = lab
730[ 3.827901] [NVT-ts] nvt_parse_dt 774: ibb_reg_name = ibb
731[ 3.827906] [NVT-ts] nvt_parse_dt 801: tp vendor: 70
732[ 3.827913] [NVT-ts] nvt_parse_dt 810: tp hw version: 1
733[ 3.827917] [NVT-ts] nvt_parse_dt 819: fw_name: novatek_nt36672_e10_hw01.fw
734[ 3.827922] [NVT-ts] nvt_parse_dt 827: limit_name: (null)
735[ 3.827927] [NVT-ts] nvt_parse_dt 801: tp vendor: 70
736[ 3.827931] [NVT-ts] nvt_parse_dt 810: tp hw version: 2
737[ 3.827935] [NVT-ts] nvt_parse_dt 819: fw_name: novatek_nt36672_e10_hw02.fw
738[ 3.827939] [NVT-ts] nvt_parse_dt 827: limit_name: (null)
739[ 3.940787] [NVT-ts] nvt_ts_check_chip_ver_trim 1399: buf[1]=0x0A, buf[2]=0x00, buf[3]=0x00, buf[4]=0x72, buf[5]=0x66, buf[6]=0x03
740[ 3.940797] [NVT-ts] nvt_ts_check_chip_ver_trim 1418: This is NVT touch IC
741[ 4.011063] ufshcd-qcom 1d84000.ufshc: UFS manufacturer id: 0x01AD
742[ 4.011897] [NVT-ts] nvt_read_pid 389: PID=5907
743[ 4.012260] input: NVTCapacitiveTouchScreen as /devices/virtual/input/input2
744[ 4.012638] [NVT-ts] nvt_ts_probe 1759: int_trigger_type=1
745[ 4.012953] [NVT-ts] nvt_ts_probe 1771: request irq 287 succeed
746[ 4.012963] [NVT-ts] nvt_get_lockdown_info 872: ++
747[ 4.012970] [NVT-ts] nvt_get_oem_data 678: ++
748[ 4.020643] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
749[ 4.021763] scsi 0:0:0:49488: Well-known LUN SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
750[ 4.022968] scsi 0:0:0:49456: Well-known LUN SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
751[ 4.024004] scsi 0:0:0:49476: Well-known LUN SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
752[ 4.025061] scsi 0:0:0:0: Direct-Access SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
753[ 4.025937] scsi 0:0:0:1: Direct-Access SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
754[ 4.026628] scsi 0:0:0:2: Direct-Access SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
755[ 4.027321] scsi 0:0:0:3: Direct-Access SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
756[ 4.028015] scsi 0:0:0:4: Direct-Access SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
757[ 4.028702] scsi 0:0:0:5: Direct-Access SKhynix H28U74301AMR D003 PQ: 0 ANSI: 6
758[ 4.032745] UFSHPB: FeaturesSupport = not support
759[ 4.032753] UFSHPB: run without HPB - err=-19
760[ 4.033239] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21
761[ 4.034217] sdb: sdb1 sdb2
762[ 4.034682] sdc: sdc1 sdc2
763[ 4.035711] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
764[ 4.037079] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7
765[ 4.037785] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48
766[ 4.090305] [NVT-ts] Init_BootLoader 343: Init OK
767[ 4.160075] [NVT-ts] Resume_PD 186: Resume PD OK
768[ 4.300477] [NVT-ts] nvt_get_oem_data 787: --
769[ 4.300485] [NVT-ts] nvt_get_lockdown_info 897: --
770[ 4.300494] [NVT-ts] nvt_ts_probe 1783: Lockdown:0x46,0x36,0x32,0x01,0xea,0x00,0x31,0x00
771[ 4.300506] [NVT-ts] nvt_get_config 861: Choose config 0: novatek_nt36672_e10_hw01.fw
772[ 4.300744] [NVT-ts] nvt_flash_proc_init 601: Succeeded!
773[ 4.300753] [NVT-ts] nvt_flash_proc_init 604: ============================================================
774[ 4.300760] [NVT-ts] nvt_flash_proc_init 605: Create /proc/NVTflash
775[ 4.300765] [NVT-ts] nvt_flash_proc_init 606: ============================================================
776[ 4.300783] [NVT-ts] nvt_extra_proc_init 917: create proc/nvt_fw_version Succeeded!
777[ 4.300796] [NVT-ts] nvt_extra_proc_init 925: create proc/nvt_baseline Succeeded!
778[ 4.300812] [NVT-ts] nvt_extra_proc_init 933: create proc/nvt_raw Succeeded!
779[ 4.300823] [NVT-ts] nvt_extra_proc_init 941: create proc/nvt_diff Succeeded!
780[ 4.300833] [NVT-ts] nvt_extra_proc_init 949: create proc/nvt_xiaomi_config_info Succeeded!
781[ 4.300843] [NVT-ts] nvt_extra_proc_init 957: create proc/tp_lockdown_info Succeeded!
782[ 4.300876] [NVT-ts] nvt_mp_proc_init 1908: create /proc/nvt_selftest Succeeded!
783[ 4.300960] [NVT-ts] nvt_ts_probe 1878: end
784[ 4.301287] [FTS]fts_ts_probe: Enter
785[ 4.301296] [FTS]fts_parse_dt: Enter
786[ 4.301305] [FTS][Info]display x(0 1080) y(0 2246)
787[ 4.301329] [FTS][Info]max touch number:10, irq gpio:31, reset gpio:32
788[ 4.301334] [FTS]fts_parse_dt: Exit(1308)
789[ 4.301450] irq 287 handler nvt_ts_irq_handler+0x0/0xb0 enabled interrupts
790[ 4.301481] ------------[ cut here ]------------
791[ 4.301486] [FTS]fts_input_init: Enter
792[ 4.301513] WARNING: CPU: 0 PID: 3 at ../../../../../../kernel/xiaomi/sdm845/kernel/irq/handle.c:149 __handle_irq_event_percpu+0x78/0x2ac
793[ 4.301520] Modules linked in:
794[ 4.301550] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.9.191-perf-g4b26646dd91f-dirty #1
795[ 4.301556] Hardware name: Xiaomi Technologies, Inc. Beryllium MP v2.1 (DT)
796[ 4.301565] task: ffffffd4b3921d00 task.stack: ffffffd4b3944000
797[ 4.301572] PC is at __handle_irq_event_percpu+0x78/0x2ac
798[ 4.301579] LR is at __handle_irq_event_percpu+0x78/0x2ac
799[ 4.301585] pc : [<ffffff9d52527adc>] lr : [<ffffff9d52527adc>] pstate: 60c00045
800[ 4.301591] sp : ffffffd4b3947be0
801[ 4.301596] x29: ffffffd4b3947c40 x28: ffffff9d54c54200
802[ 4.301609] x27: ffffff9d54c541d8
803[ 4.301613] input: fts_ts as /devices/platform/soc/a98000.i2c/i2c-3/3-0038/input/input3
804[ 4.301619] x26: 0000000000000001
805[ 4.301625] x25: ffffff9d54298018 x24: ffffff9d54cfce80
806[ 4.301637] x23: 000000000000011f x22: ffffffd4b3947c54
807[ 4.301649] x21: ffffffd4b0c8a380 x20: ffffffd4b3921d00
808[ 4.301662] x19: 0000000000000000 x18: 0000000000000060
809[ 4.301675] x17: 00000000001ef20c x16: ffffff8008313830
810[ 4.301688] x15: 7374707572726574 x14: ffffff80083137f0
811[ 4.301701] x13: 0000000000000048 x12: 0000000000000040
812[ 4.301714] x11: 0000000000000000 x10: 0000000000000000
813[ 4.301727] x9 : 911324aba5067300 x8 : 911324aba5067300
814[ 4.301740] x7 : ffffff9d54a96948 x6 : 000000000000004e
815[ 4.301753] x5 : 0000000000000000 x4 : ffffff9d54f045a1
816[ 4.301766] x3 : 0000000000000000 x2 : 0000000000000000
817[ 4.301778] x1 : 0000000000000040 x0 : 000000000000003e
818[ 4.301794]
819 PC: 0xffffff9d52527a9c:
820[ 4.301801] 7a9c b001397b 91006339 b001397c 9107637b d5384114 9108039c f90007e0 1400001b
821[ 4.301856] 7abc 320003e8 90013969 392e6d28 f94002a2 f000c460 91218800 2a1703e1 97ffec55
822[ 4.301898] 7adc d4210000 14000061 910102a1 320003e0 94125da1 35000f80 f9402aa2 f000c460
823[ 4.301940] 7afc 9126c400 2a1703e1 97ffec4a 14000076 944863cf 14000027 944863cd d53b4228
824[ 4.301985]
825 LR: 0xffffff9d52527a9c:
826[ 4.301992] 7a9c b001397b 91006339 b001397c 9107637b d5384114 9108039c f90007e0 1400001b
827[ 4.302034] 7abc 320003e8 90013969 392e6d28 f94002a2 f000c460 91218800 2a1703e1 97ffec55
828[ 4.302076] 7adc d4210000 14000061 910102a1 320003e0 94125da1 35000f80 f9402aa2 f000c460
829[ 4.302120] 7afc 9126c400 2a1703e1 97ffec4a 14000076 944863cf 14000027 944863cd d53b4228
830[ 4.302163]
831 SP: 0xffffffd4b3947ba0:
832[ 4.302169] 7ba0 52527adc ffffff9d b3947be0 ffffffd4 52527adc ffffff9d 60c00045 00000000
833[ 4.302212] 7bc0 ffffffc8 00000000 a5067300 911324ab ffffffff ffffffff 52527adc ffffff9d
834[ 4.302254] 7be0 bacc8800 ffffffd4 b264a800 ffffffd4 00000030 00000000 54c54250 ffffff9d
835[ 4.302296] 7c00 54298018 ffffff9d 00000040 00000000 54cfce80 ffffff9d 00000006 00000000
836[ 4.302346] ---[ end trace c4fbd93b4fc2ff9c ]---
837[ 4.302357] Call trace:
838[ 4.302369] Exception stack(0xffffffd4b3947ab0 to 0xffffffd4b3947be0)
839[ 4.302377] 7aa0: 000000000000003e 0000000000000040
840[ 4.302384] 7ac0: 0000000000000000 0000000000000000 ffffff9d54f045a1 0000000000000000
841[ 4.302391] 7ae0: 000000000000004e ffffff9d54a96948 911324aba5067300 911324aba5067300
842[ 4.302398] 7b00: 0000000000000000 0000000000000000 0000000000000040 0000000000000048
843[ 4.302405] 7b20: ffffff80083137f0 7374707572726574 ffffff8008313830 00000000001ef20c
844[ 4.302413] 7b40: 0000000000000060 0000000000000000 ffffffd4b3921d00 ffffffd4b0c8a380
845[ 4.302420] 7b60: ffffffd4b3947c54 000000000000011f ffffff9d54cfce80 ffffff9d54298018
846[ 4.302428] 7b80: 0000000000000001 ffffff9d54c541d8 ffffff9d54c54200 ffffffd4b3947c40
847[ 4.302435] 7ba0: ffffff9d52527adc ffffffd4b3947be0 ffffff9d52527adc 0000000060c00045
848[ 4.302442] 7bc0: 00000000ffffffc8 911324aba5067300 ffffffffffffffff ffffff9d52527adc
849[ 4.302450] [<ffffff9d52527adc>] __handle_irq_event_percpu+0x78/0x2ac
850[ 4.302458] [<ffffff9d52527df0>] handle_irq_event+0x5c/0xd0
851[ 4.302466] [<ffffff9d5252bd8c>] handle_edge_irq+0xd4/0x1a8
852[ 4.302476] [<ffffff9d5252afc0>] resend_irqs+0x6c/0x9c
853[ 4.302496] [<ffffff9d524b2ed8>] tasklet_action+0xc0/0xf0
854[ 4.302510] [<ffffff9d52481638>] __do_softirq+0x208/0x3e0
855[ 4.302517] [<ffffff9d524b3420>] run_ksoftirqd+0x34/0x4c
856[ 4.302534] [<ffffff9d524d5f3c>] smpboot_thread_fn+0x1d4/0x2d0
857[ 4.302549] [<ffffff9d524d1e08>] kthread+0x114/0x134
858[ 4.302561] [<ffffff9d52483980>] ret_from_fork+0x10/0x50
859[ 4.302635] [FTS]fts_input_init: Exit(1109)
860[ 4.302641] [FTS]fts_power_source_init: Enter
861[ 4.302981] [FTS]fts_power_source_init: Exit(382)
862[ 4.302989] [FTS]fts_power_source_ctrl: Enter
863[ 4.303005] [FTS]fts_power_source_ctrl: Exit(452)
864[ 4.303116] [FTS][Error]Pin state[release] not found
865[ 4.303129] sdm845-v2-pinctrl 3400000.pinctrl: pin GPIO_31 already requested by 3-0062; cannot claim for 3-0038
866[ 4.303137] sdm845-v2-pinctrl 3400000.pinctrl: pin-31 (3-0038) status -22
867[ 4.303147] sdm845-v2-pinctrl 3400000.pinctrl: could not request pin 31 (GPIO_31) from group gpio31 on device 3400000.pinctrl
868[ 4.303157] fts_ts 3-0038: Error applying setting, reverse things back
869[ 4.303164] [FTS][Error]Set normal pin state error:-22
870[ 4.303169] [FTS]fts_gpio_configure: Enter
871[ 4.303179] [FTS][Error][GPIO]irq gpio request failed
872[ 4.303185] [FTS]fts_gpio_configure: Exit(1187)
873[ 4.303192] [FTS][Error][GPIO]Failed to configure the gpios
874[ 4.303202] [FTS]fts_power_source_ctrl: Enter
875[ 4.303212] [FTS]fts_power_source_ctrl: Exit(452)
876[ 4.303744] [FTS]fts_ts_probe: Exit(1853)
877[ 4.303760] fts_ts: probe of 3-0038 failed with error -16
878[ 4.311449] iommu: Adding device aa00000.qcom,vidc:non_secure_cb to group 22
879[ 4.312210] iommu: Adding device aa00000.qcom,vidc:secure_bitstream_cb to group 23
880[ 4.314255] iommu: Adding device aa00000.qcom,vidc:secure_pixel_cb to group 24
881[ 4.315701] iommu: Adding device aa00000.qcom,vidc:secure_non_pixel_cb to group 25
882[ 4.318731] register_client_adhoc:find path.src 1 dest 590
883[ 4.319361] register_client_adhoc:Client handle 25 sde_reg
884[ 4.319454] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 26
885[ 4.319621] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 27
886[ 4.319918] register_client_adhoc:find path.src 25 dest 512
887[ 4.320256] register_client_adhoc:Client handle 26 mdss_rotator
888[ 4.320269] register_client_adhoc:find path.src 1 dest 590
889[ 4.320396] register_client_adhoc:Client handle 27 mdss_rot_reg
890[ 4.320917] No change in context(0==0), skip
891[ 4.322677] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:0, panic:1, dump:2
892[ 4.324043] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
893[ 4.325708] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
894[ 4.326827] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
895[ 4.328717] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 28
896[ 4.328875] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 29
897[ 4.328945] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@0x8bf00000
898[ 4.329034] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 30
899[ 4.329148] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 31
900[ 4.329285] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_fd to group 32
901[ 4.329361] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 33
902[ 4.330251] register_client_adhoc:find path.src 1 dest 589
903[ 4.330426] register_client_adhoc:Client handle 28 cam_ahb
904[ 4.330561] register_client_adhoc:find path.src 136 dest 512
905[ 4.330685] register_client_adhoc:Client handle 29 cam_hf_1_mnoc
906[ 4.330888] register_client_adhoc:find path.src 146 dest 778
907[ 4.330922] register_client_adhoc:Client handle 30 cam_hf_1_camnoc
908[ 4.331026] register_client_adhoc:find path.src 145 dest 512
909[ 4.331144] register_client_adhoc:Client handle 31 cam_hf_2_mnoc
910[ 4.331333] register_client_adhoc:find path.src 147 dest 778
911[ 4.331366] register_client_adhoc:Client handle 32 cam_hf_2_camnoc
912[ 4.331464] register_client_adhoc:find path.src 137 dest 512
913[ 4.331594] register_client_adhoc:Client handle 33 cam_sf_1_mnoc
914[ 4.331772] register_client_adhoc:find path.src 148 dest 778
915[ 4.331806] register_client_adhoc:Client handle 34 cam_sf_1_camnoc
916[ 4.340161] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff9d52fd750c bh=0000000000000000 bh_enq_f=ffffff9d54b68d00
917[ 4.340171] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 2933 Failed to unsubscribe error irq rc=-22
918[ 4.343178] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff9d52fd750c bh=0000000000000000 bh_enq_f=ffffff9d54b68d00
919[ 4.343187] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 2933 Failed to unsubscribe error irq rc=-22
920[ 4.343819] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 536 No clk named ife_dsp_clk found. Dev vfe2
921[ 4.343824] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 107 option clk get failed
922[ 4.346134] CAM_ERR: CAM-IRQ-CTRL: cam_irq_controller_subscribe_irq: 268 Invalid params: bh_handler=ffffff9d52fd750c bh=0000000000000000 bh_enq_f=ffffff9d54b68d00
923[ 4.346143] CAM_ERR: CAM-ISP: cam_vfe_bus_deinit_hw: 2933 Failed to unsubscribe error irq rc=-22
924[ 4.347595] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 172 Camera ISP probe complete
925[ 4.350710] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 58 No GPIO found
926[ 4.356007] CAM_ERR: CAM-SMMU: cam_smmu_create_add_handle_in_table: 689 Error: cam-secure already got handle 0x40bb1
927[ 4.358032] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 170 Camera JPEG probe complete
928[ 4.374435] SMB1355_IRQ_DISABLE: current vote is now 1 voted by PARALLEL_ENABLE_VOTER,0,previous voted 1
929[ 4.375045] SMB1355: smb1355_probe: smb1355 probed successfully pl_mode=USBMID-USBMID batfet_mode=NON-STACKED_BATFET
930[ 4.375247] PL_DISABLE: current vote is now 1 voted by CHG_STATE_VOTER,0,previous voted 1
931[ 4.376846] USB_ICL: current vote is now -22 voted by (null),-22,previous voted -22
932[ 4.376853] DC_SUSPEND: current vote is now 0 voted by DEFAULT_VOTER,0,previous voted 0
933[ 4.376870] BATT_PROFILE_VOTER: val: 2800000
934[ 4.376875] FCC: current vote is now 2800000 voted by BATT_PROFILE_VOTER,0,previous voted 2800000
935[ 4.376880] BATT_PROFILE_VOTER: val: 4395000
936[ 4.376884] FV: current vote is now 4395000 voted by BATT_PROFILE_VOTER,0,previous voted 4395000
937[ 4.376889] DEFAULT_VOTER: val: 500000
938[ 4.376893] DC_ICL: current vote is now 500000 voted by DEFAULT_VOTER,0,previous voted 500000
939[ 4.376910] HVDCP_DISABLE_INDIRECT: current vote is now 0 voted by DEFAULT_VOTER,0,previous voted 0
940[ 4.376916] HVDCP_ENABLE: current vote is now 1 voted by HVDCP_INDIRECT_VOTER,0,previous voted 1
941[ 4.376921] HVDCP_HW_INOV_DIS: current vote is now 0 voted by HVDCP_INDIRECT_VOTER,0,previous voted 0
942[ 4.376980] PD_DISALLOWED_INDIRECT: current vote is now 1 voted by CC_DETACHED_VOTER,0,previous voted 1
943[ 4.376985] PD_ALLOWED: current vote is now 0 voted by PD_DISALLOWED_INDIRECT_VOTER,0,previous voted 0
944[ 4.377054] CHG_DISABLE: current vote is now 0 voted by DEFAULT_VOTER,0,previous voted 0
945[ 4.377166] HVDCP_DISABLE_INDIRECT: current vote is now 1 voted by PD_INACTIVE_VOTER,1,previous voted 1
946[ 4.377171] HVDCP_ENABLE: current vote is now 0 voted by HVDCP_INDIRECT_VOTER,0,previous voted 0
947[ 4.377175] HVDCP_HW_INOV_DIS: current vote is now 1 voted by HVDCP_INDIRECT_VOTER,0,previous voted 1
948[ 4.377887] AWAKE: current vote is now 1 voted by CHG_AWAKE_VOTER,0,previous voted 1
949[ 4.378106] get prop 146 is not supported in usb
950[ 4.378328] get prop 146 is not supported in usb
951[ 4.378431] smblib_set_icl_current: set icl 475000
952[ 4.378532] smblib_set_icl_current: set icl 2147483647
953[ 4.378679] PL_ENABLE_INDIRECT: current vote is now 1 voted by USBIN_I_VOTER,0,previous voted 1
954[ 4.379091] get prop 146 is not supported in usb
955[ 4.385844] smblib_set_icl_current: set icl 475000
956[ 4.385948] smblib_set_icl_current: set icl 2147483647
957[ 4.386080] QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 1
958[ 4.386931] QNOVO_CHG_READY: current vote is now 0 voted by USB_READY_VOTER,0,previous voted 0
959[ 4.386938] QNOVO_NOT_OK: current vote is now 1 voted by CHG_READY_VOTER,0,previous voted 1
960[ 4.386944] QNOVO_DISABLE: current vote is now 1 voted by ok_to_qnovo_voter,0,previous voted 1
961[ 4.386966] AUTO_ESR: current vote is now 1 voted by QNOVO_OVERALL_VOTER,0,previous voted 1
962[ 4.386972] QNOVO_PT_DIS: current vote is now 1 voted by QNOVO_OVERALL_VOTER,0,previous voted 1
963[ 4.386978] QNOVO_AWAKE: current vote is now 0 voted by PT_RESTART_VOTER,0,previous voted 0
964[ 4.387183] QNOVO_AWAKE: current vote is now 1 voted by USB_READY_VOTER,1,previous voted 1
965[ 4.400792] get prop 146 is not supported in usb
966[ 4.401361] Couldn't get vbat rc=-22
967[ 4.401368] bcl_peripheral:bcl_read_soc battery percentage read error:-61
968[ 4.401381] thermal thermal_zone63: failed to read out thermal zone (-61)
969[ 4.401412] Couldn't get vbat rc=-22
970[ 4.401417] bcl_peripheral:bcl_read_soc battery percentage read error:-61
971[ 4.401440] Couldn't get vbat rc=-22
972[ 4.401444] bcl_peripheral:bcl_read_soc battery percentage read error:-61
973[ 4.401449] thermal thermal_zone63: failed to read out thermal zone (-61)
974[ 4.401481] Couldn't get vbat rc=-22
975[ 4.401485] bcl_peripheral:bcl_read_soc battery percentage read error:-61
976[ 4.402983] 17d41000.qcom,cpucc:qcom,limits-dcvs@0 supply isens_vref not found, using dummy regulator
977[ 4.403032] msm_lmh_dcvs:limits_isens_vref_ldo_init Regulator:isens_vref settings read error:-22
978[ 4.411597] Couldn't get vbat rc=-22
979[ 4.411603] bcl_peripheral:bcl_read_soc battery percentage read error:-61
980[ 4.411611] thermal thermal_zone63: failed to read out thermal zone (-61)
981[ 4.412498] Couldn't get vbat rc=-22
982[ 4.412504] bcl_peripheral:bcl_read_soc battery percentage read error:-61
983[ 4.412510] thermal thermal_zone63: failed to read out thermal zone (-61)
984[ 4.413414] Couldn't get vbat rc=-22
985[ 4.413420] bcl_peripheral:bcl_read_soc battery percentage read error:-61
986[ 4.413426] thermal thermal_zone63: failed to read out thermal zone (-61)
987[ 4.414323] Couldn't get vbat rc=-22
988[ 4.414330] bcl_peripheral:bcl_read_soc battery percentage read error:-61
989[ 4.414335] thermal thermal_zone63: failed to read out thermal zone (-61)
990[ 4.427199] device-mapper: uevent: version 1.0.3
991[ 4.427557] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
992[ 4.427725] device-mapper: req-crypt: dm-req-crypt successfully initalized.
993
994[ 4.427733] Bluetooth: HCI UART driver ver 2.3
995[ 4.427742] Bluetooth: HCI UART protocol H4 registered
996[ 4.428033] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
997[ 4.428060] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
998[ 4.428066] bt_dt_parse_clk_info: clocks is not provided in device tree
999[ 4.428071] bt_power_populate_dt_pinfo: clock not provided in device tree
1000[ 4.428182] CHRDEV "bt" major number 231 goes below the dynamic allocation range
1001[ 4.428668] sdhci: Secure Digital Host Controller Interface driver
1002[ 4.428673] sdhci: Copyright(c) Pierre Ossman
1003[ 4.428678] sdhci-pltfm: SDHCI platform and OF driver helper
1004[ 4.429019] leds-lm3644 0-0063: No protect time specified for IR mode
1005[ 4.430471] sdhci_msm 8804000.sdhci: sdhci_msm_probe: ICE device is not enabled
1006[ 4.431386] register_client_adhoc:find path.src 81 dest 512
1007[ 4.432218] register_client_adhoc:find path.src 1 dest 608
1008[ 4.432477] register_client_adhoc:Client handle 35 sdhc2
1009[ 4.440369] CHRDEV "flood" major number 230 goes below the dynamic allocation range
1010[ 4.440555] leds-lm3644 0-0063: Exit
1011[ 4.441161] haptics: qpnp_haptics_parse_buffer_dt: effect_arry:0: 62,62,190,160,0,0,0,0
1012[ 4.441167] haptics: qpnp_haptics_parse_buffer_dt: effect_arry:1: 62,62,62,190,190,0,0,0
1013[ 4.441172] haptics: qpnp_haptics_parse_buffer_dt: effect_arry:2: 62,62,62,62,190,190,160,144
1014[ 4.441879] haptics: qpnp_haptics_probe: haptic probe succeed
1015[ 4.442086] CHRDEV "hidraw" major number 229 goes below the dynamic allocation range
1016[ 4.442100] hidraw: raw HID events driver (C) Jiri Kosina
1017[ 4.442449] usbcore: registered new interface driver usbhid
1018[ 4.442454] usbhid: USB HID core driver
1019[ 4.442554] ashmem: initialized
1020[ 4.442562] ipa_ut ipa_ut_module_init:1044 Loading IPA test module...
1021[ 4.442700] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
1022[ 4.445248] CHRDEV "seemplog" major number 228 goes below the dynamic allocation range
1023[ 4.445307] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode
1024[ 4.445611] seemp: seemp_logk_init: SCM call failed with ret val = 0 -3 0
1025[ 4.478309] bimc-bwmon 1436400.qcom,cpu-bwmon: BW HWmon governor registered.
1026[ 4.478345] bimc-bwmon 114a000.qcom,llcc-bwmon: BW HWmon governor registered.
1027[ 4.479207] arm-memlat-mon soc:qcom,cpu0-memlat-mon: Memory Latency governor registered.
1028[ 4.479246] arm-memlat-mon soc:qcom,cpu4-memlat-mon: Memory Latency governor registered.
1029[ 4.479275] arm-memlat-mon soc:qcom,cpu0-l3lat-mon: Memory Latency governor registered.
1030[ 4.479302] arm-memlat-mon soc:qcom,cpu4-l3lat-mon: Memory Latency governor registered.
1031[ 4.479328] arm-memlat-mon soc:qcom,devfreq-compute: Compute governor registered.
1032[ 4.479963] register_client_adhoc:find path.src 1 dest 770
1033[ 4.480189] register_client_adhoc:Client handle 36 soc:qcom,cpubw
1034[ 4.480792] register_client_adhoc:find path.src 129 dest 512
1035[ 4.480829] register_client_adhoc:Client handle 37 soc:qcom,llccbw
1036[ 4.482581] register_client_adhoc:find path.src 1 dest 512
1037[ 4.482696] register_client_adhoc:Client handle 38 soc:qcom,memlat-cpu0
1038[ 4.482896] register_client_adhoc:find path.src 1 dest 512
1039[ 4.483000] register_client_adhoc:Client handle 39 soc:qcom,memlat-cpu4
1040[ 4.483188] register_client_adhoc:find path.src 139 dest 627
1041[ 4.483262] register_client_adhoc:Client handle 40 soc:qcom,snoc_cnoc_keepalive
1042[ 4.483388] register_client_adhoc:find path.src 1 dest 512
1043[ 4.483494] register_client_adhoc:Client handle 41 soc:qcom,mincpubw
1044[ 4.483743] register_client_adhoc:find path.src 26 dest 512
1045[ 4.483814] register_client_adhoc:Client handle 42 soc:qcom,gpubw
1046[ 4.485242] coresight-tmc 6b09000.tmc: invalid cti data
1047[ 4.485246] coresight-tmc 6b09000.tmc: failed to get csr, defer probe
1048[ 4.485278] coresight-tmc 6048000.tmc: failed to get flush cti
1049[ 4.485280] coresight-tmc 6048000.tmc: failed to get reset cti
1050[ 4.485283] coresight-tmc 6048000.tmc: failed to get csr, defer probe
1051[ 4.485347] coresight-tmc 6047000.tmc: failed to get flush cti
1052[ 4.485349] coresight-tmc 6047000.tmc: failed to get reset cti
1053[ 4.485351] coresight-tmc 6047000.tmc: failed to get csr, defer probe
1054[ 4.486798] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
1055[ 4.486895] coresight-replicator-qcom 6b0a000.replicator: REPLICATOR 1.0 initialized
1056[ 4.486986] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
1057[ 4.489995] OF: graph: no port node found in /soc/cti@69e1000
1058[ 4.490050] OF: graph: no port node found in /soc/cti@69e4000
1059[ 4.490094] OF: graph: no port node found in /soc/cti@69e5000
1060[ 4.490135] OF: graph: no port node found in /soc/cti@6c09000
1061[ 4.490175] OF: graph: no port node found in /soc/cti@6c0a000
1062[ 4.490213] OF: graph: no port node found in /soc/cti@78e0000
1063[ 4.490251] OF: graph: no port node found in /soc/cti@78f0000
1064[ 4.490296] OF: graph: no port node found in /soc/cti@7900000
1065[ 4.490335] OF: graph: no port node found in /soc/cti@6010000
1066[ 4.490374] OF: graph: no port node found in /soc/cti@6011000
1067[ 4.490436] OF: graph: no port node found in /soc/cti@6012000
1068[ 4.490476] OF: graph: no port node found in /soc/cti@6013000
1069[ 4.490517] OF: graph: no port node found in /soc/cti@6014000
1070[ 4.490558] OF: graph: no port node found in /soc/cti@6015000
1071[ 4.490596] OF: graph: no port node found in /soc/cti@6016000
1072[ 4.490634] OF: graph: no port node found in /soc/cti@6017000
1073[ 4.490671] OF: graph: no port node found in /soc/cti@6018000
1074[ 4.490711] OF: graph: no port node found in /soc/cti@6019000
1075[ 4.490750] OF: graph: no port node found in /soc/cti@601a000
1076[ 4.490829] OF: graph: no port node found in /soc/cti@601b000
1077[ 4.490866] OF: graph: no port node found in /soc/cti@601c000
1078[ 4.490906] OF: graph: no port node found in /soc/cti@601d000
1079[ 4.490946] OF: graph: no port node found in /soc/cti@601e000
1080[ 4.490984] OF: graph: no port node found in /soc/cti@601f000
1081[ 4.491022] OF: graph: no port node found in /soc/cti@7020000
1082[ 4.491066] OF: graph: no port node found in /soc/cti@7120000
1083[ 4.491108] OF: graph: no port node found in /soc/cti@7220000
1084[ 4.491152] OF: graph: no port node found in /soc/cti@7320000
1085[ 4.491194] OF: graph: no port node found in /soc/cti@7420000
1086[ 4.491240] OF: graph: no port node found in /soc/cti@7520000
1087[ 4.491288] OF: graph: no port node found in /soc/cti@7620000
1088[ 4.491335] OF: graph: no port node found in /soc/cti@7720000
1089[ 4.491382] OF: graph: no port node found in /soc/cti@6b04000
1090[ 4.491496] OF: graph: no port node found in /soc/csr@6001000
1091[ 4.491518] coresight-csr 6001000.csr: CSR initialized: coresight-csr
1092[ 4.491526] OF: graph: no port node found in /soc/csr@6b0e000
1093[ 4.491548] coresight-csr 6b0e000.csr: CSR initialized: coresight-swao-csr
1094[ 4.491688] OF: graph: no port node found in /soc/hwevent@0x014066f0
1095[ 4.491712] coresight-hwevent 14066f0.hwevent: Hardware Event driver initialized
1096[ 4.491851] coresight-dummy soc:dummy_sink: Dummy device initialized
1097[ 4.491921] coresight-dummy soc:spss_etm0: Dummy device initialized
1098[ 4.492246] CHRDEV "sensors" major number 227 goes below the dynamic allocation range
1099[ 4.492512] usbcore: registered new interface driver snd-usb-audio
1100[ 4.500248] tas2559 2-004c: tas2559_i2c_probe enter
1101[ 4.500275] tas2559 2-004c: tas2559_parse_dt, tas2559 reset gpio 12
1102[ 4.500277] tas2559 2-004c: tas2559_parse_dt, tas2560 reset gpio 76
1103[ 4.500280] tas2559 2-004c: ti,tas2559 addr=0x4c
1104[ 4.500283] tas2559 2-004c: ti,tas2560-addr=0x4d
1105[ 4.500293] tas2559 2-004c: tas2559_hw_reset
1106[ 4.600361] tas2559 2-004c: TAS2559 PGID=0xa0
1107[ 4.600658] tas2559 2-004c: TAS2560 PGID=0x00
1108[ 4.600673] tas2559 2-004c: irq = 267
1109[ 4.600813] tas2559 2-004c: irq = 286
1110[ 4.600902] tas2559 2-004c: tas2559_register_codec, enter
1111[ 4.600999] tas2559 2-004c: tas2559_register_misc, leave
1112[ 4.601005] tas2559 2-004c: tiload_driver_init_tas2559
1113[ 4.601010] CHRDEV "tiload_node" major number 225 goes below the dynamic allocation range
1114[ 4.601023] tas2559 2-004c: allocated Major Number: 225
1115[ 4.601118] tas2559 2-004c: Registered TiLoad driver, Major number: 225
1116[ 4.601191] tas2559 2-004c: tas2559_fw_ready:
1117[ 4.601197] tas2559 2-004c: tas2559_uCDSP.bin firmware is not loaded.
1118[ 4.601504] wdsp_mgr_parse_dt_entries: using global wdsp fw: cpe_intl.
1119[ 4.603555] CHRDEV "elliptic" major number 224 goes below the dynamic allocation range
1120[ 4.603763] CHRDEV "elliptic_us_io" major number 223 goes below the dynamic allocation range
1121[ 4.603836] CHRDEV "elliptic_us_ctrl_io" major number 222 goes below the dynamic allocation range
1122[ 4.605064] CHRDEV "avtimer" major number 221 goes below the dynamic allocation range
1123[ 4.607631] CHRDEV "wcd-dsp-glink" major number 220 goes below the dynamic allocation range
1124[ 4.608400] GACT probability NOT on
1125[ 4.608416] Mirror/redirect action on
1126[ 4.608428] u32 classifier
1127[ 4.608431] Actions configured
1128[ 4.608438] Netfilter messages via NETLINK v0.30.
1129[ 4.608447] nfnl_acct: registering with nfnetlink.
1130[ 4.608638] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
1131[ 4.608783] ctnetlink v0.93: registering with nfnetlink.
1132[ 4.609069] xt_time: kernel timezone is -0000
1133[ 4.609138] IPv4 over IPsec tunneling driver
1134[ 4.609461] ip_tables: (C) 2000-2006 Netfilter Core Team
1135[ 4.609583] arp_tables: arp_tables: (C) 2002 David S. Miller
1136[ 4.609635] Initializing XFRM netlink socket
1137[ 4.609810] NET: Registered protocol family 10
1138[ 4.610484] mip6: Mobile IPv6
1139[ 4.610500] ip6_tables: (C) 2000-2006 Netfilter Core Team
1140[ 4.610865] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
1141[ 4.611318] NET: Registered protocol family 17
1142[ 4.611333] NET: Registered protocol family 15
1143[ 4.611351] Ebtables v2.0 registered
1144[ 4.611528] Bluetooth: RFCOMM socket layer initialized
1145[ 4.611539] Bluetooth: RFCOMM ver 1.11
1146[ 4.611599] l2tp_core: L2TP core driver, V2.0
1147[ 4.611608] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1148[ 4.611612] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1149[ 4.611623] l2tp_netlink: L2TP netlink interface
1150[ 4.611646] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1151[ 4.611651] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1152[ 4.611716] Key type dns_resolver registered
1153[ 4.612103] NET: Registered protocol family 27
1154[ 4.621728] minidump-id not found for adsp
1155[ 4.621887] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
1156[ 4.622475] minidump-id not found for slpi
1157[ 4.622592] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
1158[ 4.623014] minidump-id not found for cdsp
1159[ 4.623133] subsys-pil-tz 8300000.qcom,turing: for cdsp segments only will be dumped.
1160[ 4.623651] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
1161[ 4.623808] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node mba_region@0x96900000
1162[ 4.624144] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1163[ 4.624229] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
1164[ 4.627398] sps:BAM 0x000000000a704000 is registered.
1165[ 4.627628] register_client_adhoc:find path.src 61 dest 512
1166[ 4.628004] register_client_adhoc:find path.src 61 dest 676
1167[ 4.628180] register_client_adhoc:find path.src 1 dest 583
1168[ 4.628379] register_client_adhoc:Client handle 43 usb0
1169[ 4.628485] Invalid index Defaulting curr to 0
1170[ 4.628744] msm-dwc3 a600000.ssusb: Not attached
1171[ 4.630075] ipa_rm ipa_rm_delete_resource:155 resource does not exist
1172[ 4.630083] usb_bam_ipa_delete_resources: Failed to delete USB_PROD resource
1173[ 4.630092] ipa_rm ipa_rm_delete_resource:155 resource does not exist
1174[ 4.630098] usb_bam_ipa_delete_resources: Failed to delete USB_CONS resource
1175[ 4.631716] FG: fg_parse_dt: fg_parse_dt: jeita threshold 0, 15, 45, 60
1176[ 4.631769] FG: fg_clear_dma_errors_if_any: dma_sts: 0
1177[ 4.633747] FG: fg_set_esr_timer: esr_charging_timer set to 0/96
1178[ 4.634087] FG: fg_set_esr_timer: esr_discharging_timer set to 96/96
1179[ 4.639147] FG_DELTA_BSOC_IRQ: current vote is now 0 voted by fg_delta_bsoc_irq,0,previous voted 0
1180[ 4.639154] FG_BATT_MISS_IRQ: current vote is now 0 voted by fg_batt_miss_irq,0,previous voted 0
1181[ 4.639219] FG: fg_gen3_probe: battery SOC:50 voltage: 4287586uV temp: 350
1182[ 4.639590] FG: __fg_esr_filter_config: applied ESR filter 1 values
1183[ 4.639980] qcom,fg-gen3 c440000.qcom,spmi:qcom,pmi8998@2:qpnp,fg: thermal_zone_of_sensor_register() failed rc:-19
1184[ 4.641096] FG: fg_psy_get_property: unsupported property 4
1185[ 4.641564] FG: soc_work_fn: adjust_soc: s 50 r 148437 i 107421 v 4287586 t 350 cc 0 m 0xfb
1186[ 4.641569] FG: soc_work_fn: adjust_soc: 000: 63, f8, 1f, 33
1187[ 4.641573] FG: soc_work_fn: adjust_soc: 019: bf, ff, 00, 00
1188[ 4.641577] FG: soc_work_fn: adjust_soc: 079: 00, 00, 00, 09
1189[ 4.642609] FG: status_change_work: Profile load is not complete yet
1190[ 4.642615] FG: status_change_work: charge_status:-22 charge_type:0 charge_done:0
1191[ 4.881423] coresight-tmc 6b09000.tmc: invalid cti data
1192[ 4.881766] CHRDEV "byte-cntr" major number 219 goes below the dynamic allocation range
1193[ 4.881828] FG: status_change_work: Profile load is not complete yet
1194[ 4.881833] FG: status_change_work: charge_status:-22 charge_type:0 charge_done:0
1195[ 4.881957] sps:BAM 0x0000000006064000 is registered.
1196[ 4.882630] CHRDEV "6002000.stm" major number 218 goes below the dynamic allocation range
1197[ 4.882804] coresight-stm 6002000.stm: STM32 initialized
1198[ 4.886284] sps:BAM 0x000000000a704000 is registered.
1199[ 4.886459] register_client_adhoc:find path.src 61 dest 512
1200[ 4.886773] register_client_adhoc:find path.src 61 dest 676
1201[ 4.886943] register_client_adhoc:find path.src 1 dest 583
1202[ 4.887129] register_client_adhoc:Client handle 43 usb0
1203[ 4.887217] msm-dwc3 a600000.ssusb: charger detection in progress
1204[ 4.887966] Registered cp15_barrier emulation handler
1205[ 4.887995] Registered setend emulation handler
1206[ 4.888017] core_ctl: Creating CPU group 0
1207[ 4.888021] core_ctl: Init CPU0 state
1208[ 4.888025] core_ctl: Init CPU1 state
1209[ 4.888028] core_ctl: Init CPU2 state
1210[ 4.888032] core_ctl: Init CPU3 state
1211[ 4.888154] core_ctl: Creating CPU group 4
1212[ 4.888160] core_ctl: Init CPU4 state
1213[ 4.888164] core_ctl: Init CPU5 state
1214[ 4.888167] core_ctl: Init CPU6 state
1215[ 4.888170] core_ctl: Init CPU7 state
1216[ 4.888654] registered taskstats version 1
1217[ 4.889465] Btrfs loaded, crc32c=crc32c-arm64-hw
1218[ 4.942622] spss_utils [spss_init]: spss-utils driver Ver 2.0 30-Mar-2017.
1219[ 4.942829] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
1220[ 4.945186] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 34
1221[ 4.945615] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 35
1222[ 4.945902] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 36
1223[ 4.946174] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 37
1224[ 4.946441] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 38
1225[ 4.946704] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 39
1226[ 4.946959] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 40
1227[ 4.947219] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 41
1228[ 4.947477] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 42
1229[ 4.948171] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 43
1230[ 4.948244] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
1231[ 4.948273] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 44
1232[ 4.948530] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 45
1233[ 4.949222] fastrpc: probe of soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 failed with error -1
1234[ 4.949234] CHRDEV "adsprpc-smd" major number 217 goes below the dynamic allocation range
1235[ 4.949964] iommu: Adding device 171c0000.slim:qcom,iommu_slim_ctrl_cb to group 46
1236[ 4.951266] iommu: Adding device 17240000.slim:qcom,iommu_slim_ctrl_cb to group 47
1237[ 4.952814] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input4
1238[ 4.953214] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 1971-02-26 18:00:23 UTC (36439223)
1239[ 4.954570] lpm_levels_of: idx 1 7100
1240[ 4.954573] lpm_levels_of: idx 2 5989
1241[ 4.954575] lpm_levels_of: idx 2 3933
1242[ 4.954609] lpm_levels_of: idx 1 1744
1243[ 4.954611] lpm_levels_of: idx 2 1000
1244[ 4.954614] lpm_levels_of: Residency < 0 for LPM
1245[ 4.954616] lpm_levels_of: idx 2 1000
1246[ 4.954632] lpm_levels: register_cluster_lpm_stats()
1247[ 4.954695] lpm_levels: register_cluster_lpm_stats()
1248[ 4.957393] RNDIS_IPA module is loaded.
1249[ 4.957459] rmnet_ipa3 started initialization
1250[ 4.959079] msm_bus_late_init: Remove handoff bw requests
1251[ 4.959742] ufs_card_gdsc: disabling
1252[ 4.959799] camera_iovdd_ldo: disabling
1253[ 4.959801] actuator_rear_regulator: disabling
1254[ 4.959803] camera_vdig_ldo: disabling
1255[ 4.959805] disp_vci_vreg: disabling
1256[ 4.959813] disp_vddio_vreg: disabling
1257[ 4.959825] ext_5v_boost: disabling
1258[ 4.959828] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1259[ 4.959918] ALSA device list:
1260[ 4.959921] No soundcards found.
1261[ 4.959942] Warning: unable to open an initial console.
1262[ 4.961512] Freeing unused kernel memory: 8192K
1263[ 5.090077] FG: fg_get_batt_id: batt_id: 92000
1264[ 5.090117] FG_BATT_MISS_IRQ: current vote is now 1 voted by fg_batt_miss_irq,0,previous voted 1
1265[ 5.091375] of_batterydata_get_best_profile: e10_cos_4000mAh found
1266[ 5.091763] FG: is_profile_load_required: Battery profile integrity bit is set
1267[ 5.092244] FG: is_profile_load_required: Battery profile is same, not loading it
1268[ 5.092935] BATT_PROFILE_VOTER: val: 4400000
1269[ 5.092941] FV: current vote is now 4400000 voted by BATT_PROFILE_VOTER,0,previous voted 4400000
1270[ 5.093526] FG: fg_notify_charger: Notified charger on float voltage and FCC
1271[ 5.093532] FG: profile_load_work: profile loaded successfully
1272[ 5.093819] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1273[ 5.094561] FG: fg_adjust_ki_coeff_full_soc: Wrote ki_coeff_full_soc 733
1274[ 5.094616] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1275[ 5.680183] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:0.
1276[ 5.680189] FG: soc_monitor_work: soc:98, raw_soc:98, c:190429, s:1
1277[ 5.681382] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1278[ 5.682182] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1279[ 5.750640] USB_PSY_VOTER: val: 500000
1280[ 5.750647] USB_ICL: current vote is now 500000 voted by USB_PSY_VOTER,2,previous voted 500000
1281[ 5.750655] PL_ENABLE_INDIRECT: current vote is now 0 voted by USBIN_I_VOTER,0,previous voted 0
1282[ 5.750675] smblib_set_icl_current: set icl 50000
1283[ 5.750701] PMI: set_sdp_current: ICL 50000uA isn't supported for SDP
1284[ 5.750706] PMI: smblib_set_icl_current: Couldn't set SDP ICL rc=-22
1285[ 5.750709] smblib_set_icl_current: set icl 500000
1286[ 5.750800] PD_DISALLOWED_INDIRECT: current vote is now 0 voted by HVDCP_TIMEOUT_VOTER,1,previous voted 0
1287[ 5.750807] PD_ALLOWED: current vote is now 1 voted by PD_DISALLOWED_INDIRECT_VOTER,0,previous voted 1
1288[ 5.751021] usbpd usbpd0: Type-C Source (default) connected
1289[ 5.752102] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1290[ 5.752529] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1291[ 5.755244] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
1292[ 5.870365] get prop 146 is not supported in usb
1293[ 5.990338] get prop 146 is not supported in usb
1294[ 6.251770] APSD_DISABLE: current vote is now 1 voted by PD_HARD_RESET_VOTER,0,previous voted 1
1295[ 6.252617] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1296[ 6.253363] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1297[ 6.370358] get prop 146 is not supported in usb
1298[ 6.371002] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1299[ 6.371431] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1300[ 6.490363] get prop 146 is not supported in usb
1301[ 6.730390] get prop 146 is not supported in usb
1302[ 6.730674] get prop 146 is not supported in usb
1303[ 7.120108] of_batterydata_get_best_profile: e10_cos_4000mAh found
1304[ 7.120120] QCOM-STEPCHG: read_range_data_from_node: Count qcom,step-chg-ranges failed, rc=-22
1305[ 7.258094] EXT4-fs (sda21): couldn't mount as ext3 due to feature incompatibilities
1306[ 7.258382] EXT4-fs (sda21): couldn't mount as ext2 due to feature incompatibilities
1307[ 7.402565] EXT4-fs (sda21): warning: maximal mount count reached, running e2fsck is recommended
1308[ 7.404892] EXT4-fs (sda21): 2 orphan inodes deleted
1309[ 7.404899] EXT4-fs (sda21): recovery complete
1310[ 7.409520] EXT4-fs (sda21): mounted filesystem with ordered data mode. Opts: (null)
1311[ 7.438764] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1312[ 7.439570] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1313[ 7.439615] BATT_PROFILE_VOTER: val: 2800000
1314[ 7.439620] JEITA_VOTER: val: 2800000
1315[ 7.439630] BATT_PROFILE_VOTER: val: 4400000
1316[ 7.439633] JEITA_VOTER: val: 4400000
1317[ 7.466797] using random self ethernet address
1318[ 7.466808] using random host ethernet address
1319[ 7.467217] rndis0: HOST MAC a6:76:a2:b7:fa:0d
1320[ 7.467257] rndis0: MAC fa:46:4f:8d:20:0e
1321[ 7.468569] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1322[ 7.550344] get prop 146 is not supported in usb
1323[ 7.551051] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1324[ 7.551480] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1325[ 7.600997] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
1326[ 7.670362] get prop 146 is not supported in usb
1327[ 7.724446] android_work: sent uevent USB_STATE=CONNECTED
1328[ 7.728055] android_work: sent uevent USB_STATE=DISCONNECTED
1329[ 7.864399] android_work: sent uevent USB_STATE=CONNECTED
1330[ 7.867761] configfs-gadget gadget: high-speed config #1: c
1331[ 7.868068] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1332[ 7.868145] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
1333[ 7.868175] android_work: sent uevent USB_STATE=CONFIGURED
1334[ 7.869248] dwc3 a600000.dwc3: wakeup failed --> -22
1335[ 7.869287] ------------[ cut here ]------------
1336[ 7.869303] WARNING: CPU: 1 PID: 549 at ../../../../../../kernel/xiaomi/sdm845/drivers/usb/dwc3/gadget.c:369 dwc3_send_gadget_ep_cmd+0x660/0x668
1337[ 7.869308] Modules linked in:
1338[ 7.869320] CPU: 1 PID: 549 Comm: kworker/u17:1 Tainted: G W 4.9.191-perf-g4b26646dd91f-dirty #1
1339[ 7.869325] Hardware name: Xiaomi Technologies, Inc. Beryllium MP v2.1 (DT)
1340[ 7.869335] Workqueue: dwc_wq dwc3_bh_work
1341[ 7.869341] task: ffffffd4aa57d700 task.stack: ffffffd4a9d3c000
1342[ 7.869347] PC is at dwc3_send_gadget_ep_cmd+0x660/0x668
1343[ 7.869352] LR is at dwc3_send_gadget_ep_cmd+0x660/0x668
1344[ 7.869356] pc : [<ffffff9d52e25a34>] lr : [<ffffff9d52e25a34>] pstate: 60c001c5
1345[ 7.869359] sp : ffffffd4a9d3f960
1346[ 7.869363] x29: ffffffd4a9d3f9c0 x28: ffffffd4aabcb020
1347[ 7.869370] x27: 0000000000000000 x26: 00000000000000ff
1348[ 7.869378] x25: ffffffd4aabcb020 x24: 0000000000000004
1349[ 7.869386] x23: 00000000ffffffea x22: ffffffd4a9d3f9d8
1350[ 7.869394] x21: 0000000000000006 x20: ffffffd4aaac3e00
1351[ 7.869402] x19: ffffffd4aabcb020 x18: 0000000000000048
1352[ 7.869410] x17: 00000000001e4c08 x16: ffffff800831cb80
1353[ 7.869417] x15: 0a32322d203e2d2d x14: ffffff800831cb50
1354[ 7.869425] x13: 0000000000000038 x12: 0000000000000030
1355[ 7.869432] x11: 0000000000000000 x10: 0000000000000000
1356[ 7.869439] x9 : 911324aba5067300 x8 : 911324aba5067300
1357[ 7.869446] x7 : ffffff9d54a96948 x6 : 0000000000000038
1358[ 7.869453] x5 : 0000000000000000 x4 : ffffff9d54f045a1
1359[ 7.869460] x3 : 0000000000000000 x2 : 0000000000000000
1360[ 7.869468] x1 : 00000000000001c0 x0 : 0000000000000028
1361[ 7.869476]
1362 PC: 0xffffff9d52e259f4:
1363[ 7.869480] 59f4 35fff397 17ffff51 320003e9 3938c109 f9407f80 97faad09 f9407f88 aa1c03f3
1364[ 7.869503] 5a14 aa0003e1 f9402902 b5000042 f9400902 90008540 910d1000 2a1703e3 97dbf47f
1365[ 7.869525] 5a34 d4210000 17fffea2 d10183ff a90357f6 a9044ff4 a9057bfd 910143fd f000df08
1366[ 7.869547] 5a54 f9438508 aa0003f3 2a0203f5 2a0103f6 f90017e8 f9401e68 f9405274 b4000188
1367[ 7.869570]
1368 LR: 0xffffff9d52e259f4:
1369[ 7.869574] 59f4 35fff397 17ffff51 320003e9 3938c109 f9407f80 97faad09 f9407f88 aa1c03f3
1370[ 7.869596] 5a14 aa0003e1 f9402902 b5000042 f9400902 90008540 910d1000 2a1703e3 97dbf47f
1371[ 7.869619] 5a34 d4210000 17fffea2 d10183ff a90357f6 a9044ff4 a9057bfd 910143fd f000df08
1372[ 7.869641] 5a54 f9438508 aa0003f3 2a0203f5 2a0103f6 f90017e8 f9401e68 f9405274 b4000188
1373[ 7.869664]
1374 SP: 0xffffffd4a9d3f920:
1375[ 7.869668] f920 52e25a34 ffffff9d a9d3f960 ffffffd4 52e25a34 ffffff9d 60c001c5 00000000
1376[ 7.869690] f940 ffffffc8 00000000 a5067300 911324ab ffffffff ffffffff 52e25a34 ffffff9d
1377[ 7.869713] f960 b26d2410 00000006 00000000 00000000 a8c63500 ffffffd4 a9ca1430 ffffffd4
1378[ 7.869735] f980 000000ff 00000000 aabcb020 ffffffd4 00000004 00000000 00838188 00000000
1379[ 7.869758] ---[ end trace c4fbd93b4fc2ff9e ]---
1380[ 7.869763] Call trace:
1381[ 7.869769] Exception stack(0xffffffd4a9d3f830 to 0xffffffd4a9d3f960)
1382[ 7.869773] f820: 0000000000000028 00000000000001c0
1383[ 7.869779] f840: 0000000000000000 0000000000000000 ffffff9d54f045a1 0000000000000000
1384[ 7.869784] f860: 0000000000000038 ffffff9d54a96948 911324aba5067300 911324aba5067300
1385[ 7.869788] f880: 0000000000000000 0000000000000000 0000000000000030 0000000000000038
1386[ 7.869794] f8a0: ffffff800831cb50 0a32322d203e2d2d ffffff800831cb80 00000000001e4c08
1387[ 7.869799] f8c0: 0000000000000048 ffffffd4aabcb020 ffffffd4aaac3e00 0000000000000006
1388[ 7.869804] f8e0: ffffffd4a9d3f9d8 00000000ffffffea 0000000000000004 ffffffd4aabcb020
1389[ 7.869809] f900: 00000000000000ff 0000000000000000 ffffffd4aabcb020 ffffffd4a9d3f9c0
1390[ 7.869814] f920: ffffff9d52e25a34 ffffffd4a9d3f960 ffffff9d52e25a34 0000000060c001c5
1391[ 7.869819] f940: 00000000ffffffc8 911324aba5067300 ffffffffffffffff ffffff9d52e25a34
1392[ 7.869825] [<ffffff9d52e25a34>] dwc3_send_gadget_ep_cmd+0x660/0x668
1393[ 7.869831] [<ffffff9d52e2c174>] dwc3_ep0_start_trans+0x58/0x118
1394[ 7.869836] [<ffffff9d52e2d794>] __dwc3_ep0_do_control_data+0x140/0x178
1395[ 7.869840] [<ffffff9d52e2bca0>] __dwc3_gadget_ep0_queue+0x78/0x1c8
1396[ 7.869845] [<ffffff9d52e2bb38>] dwc3_gadget_ep0_queue+0x164/0x190
1397[ 7.869853] [<ffffff9d52e7aa14>] usb_ep_queue+0x38/0x128
1398[ 7.869858] [<ffffff9d52e762fc>] composite_setup+0x1938/0x1cd4
1399[ 7.869864] [<ffffff9d52e7a154>] android_setup+0xe8/0x148
1400[ 7.869868] [<ffffff9d52e2cd40>] dwc3_ep0_interrupt+0xa2c/0x11b8
1401[ 7.869873] [<ffffff9d52e2645c>] dwc3_bh_work+0x1fc/0xf1c
1402[ 7.869881] [<ffffff9d524cc54c>] process_one_work+0x214/0x4a4
1403[ 7.869885] [<ffffff9d524ccb18>] worker_thread+0x33c/0x4c0
1404[ 7.869892] [<ffffff9d524d1e08>] kthread+0x114/0x134
1405[ 7.869898] [<ffffff9d52483980>] ret_from_fork+0x10/0x50
1406[ 7.910400] get prop 146 is not supported in usb
1407[ 7.910450] get prop 146 is not supported in usb
1408[ 8.625740] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1409[ 8.626493] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1410[ 8.740372] get prop 146 is not supported in usb
1411[ 8.740944] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1412[ 8.741376] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1413[ 8.860368] get prop 146 is not supported in usb
1414[ 9.100341] get prop 146 is not supported in usb
1415[ 9.100631] get prop 146 is not supported in usb
1416[ 9.810730] APSD_DISABLE: current vote is now 0 voted by PD_HARD_RESET_VOTER,0,previous voted 0
1417[ 9.810779] USB_IRQ_DISABLE: current vote is now 0 voted by PD_VOTER,0,previous voted 0
1418[ 9.811393] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
1419[ 9.812201] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
1420[ 9.930335] get prop 146 is not supported in usb
1421[ 10.140420] EXT4-fs (sda21): re-mounted. Opts: (null)
1422[ 10.152333] preinit: (10.15) Welcome to Sailfish OS 3.1.0.12 (Seitseminen)
1423[ 10.164473] preinit: (10.16) is_erase_needed: No : 0
1424[ 10.183895] preinit: (10.18) get_bootstate: USER : 0
1425[ 10.184185] preinit: (10.18) BOOTSTATE = USER
1426[ 10.186345] preinit: (10.18) Booting to default.target
1427[ 10.212801] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
1428[ 10.213026] systemd[1]: Detected architecture arm64.
1429[ 10.214829] systemd[1]: Set hostname to <Sailfish>.
1430[ 10.223278] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1431[ 10.315267] systemd[1]: data.mount: Unit is bound to inactive unit dev-sda21.device. Stopping, too.
1432[ 10.352039] systemd[1]: Reached target Swap.
1433[ 10.352375] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
1434[ 10.352443] systemd[1]: Reached target Encrypted Volumes.
1435[ 10.352950] systemd[1]: Created slice Root Slice.
1436[ 10.353272] systemd[1]: Created slice User and Session Slice.
1437[ 10.355492] systemd[1]: Listening on udev Control Socket.
1438[ 10.373717] cgroup: new mount options do not match the existing superblock, will be ignored
1439[ 10.375033] EXT4-fs (sda21): re-mounted. Opts: (null)
1440[ 10.381652] systemd-journald[969]: [/etc/systemd/journald.conf:11] Failed to parse storage setting, ignoring: automatic
1441[ 10.395994] systemd-journald[969]: File /var/log/journal/6e3c9e741e6142339de6d0e32c1e7d0f/system.journal corrupted or uncleanly shut down, renaming and replacing.
1442[ 10.505950] systemd-journald[969]: Received request to flush runtime journal from PID 1
1443[ 10.850329] get prop 146 is not supported in usb
1444[ 10.990281] get prop 146 is not supported in usb
1445[ 11.079655] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1446[ 11.083478] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1447[ 11.083997] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1448[ 11.085293] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1449[ 11.097308] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1450[ 11.099479] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1451[ 11.106911] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1452[ 11.108661] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1453[ 11.110669] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1454[ 11.112166] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1455[ 11.113935] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1456[ 11.115633] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1457[ 11.116250] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1458[ 11.118772] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1459[ 11.119119] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1460[ 11.120239] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1461[ 11.120481] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1462[ 11.120606] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1463[ 11.121746] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1464[ 11.123112] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1465[ 11.123330] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1466[ 11.125881] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1467[ 11.126816] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1468[ 11.126915] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1469[ 11.127252] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1470[ 11.127311] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1471[ 11.127425] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1472[ 11.131299] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1473[ 11.132882] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1474[ 11.133092] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1475[ 11.135603] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1476[ 11.137648] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1477[ 11.138214] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1478[ 11.140241] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1479[ 11.145564] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1480[ 11.146189] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1481[ 11.146490] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1482[ 11.147221] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1483[ 11.152403] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1484[ 11.155430] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1485[ 11.157249] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1486[ 11.158237] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1487[ 11.159825] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1488[ 11.163385] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1489[ 11.164077] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1490[ 11.165223] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1491[ 11.165781] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1492[ 11.166018] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1493[ 11.167081] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1494[ 11.167491] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1495[ 11.168752] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1496[ 11.169296] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1497[ 11.169350] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1498[ 11.170589] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1499[ 11.171198] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1500[ 11.171372] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1501[ 11.175838] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1502[ 11.179448] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1503[ 11.185309] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1504[ 11.186200] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1505[ 11.186961] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1506[ 11.187447] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1507[ 11.195051] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1508[ 11.196141] EXT4-fs (sda14): warning: maximal mount count reached, running e2fsck is recommended
1509[ 11.196701] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1510[ 11.197011] EXT4-fs (sda14): recovery complete
1511[ 11.197335] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1512[ 11.197415] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: barrier=1
1513[ 11.198181] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1514[ 11.199003] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1515[ 11.199493] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1516[ 11.203333] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1517[ 11.204541] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1518[ 11.205547] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1519[ 11.206318] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1520[ 11.208694] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1521[ 11.211918] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1522[ 11.212114] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1523[ 11.213985] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1524[ 11.214148] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1525[ 11.216335] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1526[ 11.217472] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1527[ 11.220605] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1528[ 11.223017] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1529[ 11.231092] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1530[ 11.236934] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1531[ 11.238580] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1532[ 11.239146] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1533[ 11.241023] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1534[ 11.242489] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1535[ 11.243831] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1536[ 11.244086] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1537[ 11.244445] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1538[ 11.246799] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
1539[ 11.295299] EXT4-fs (sde48): mounted filesystem without journal. Opts: barrier=1
1540[ 11.300373] EXT4-fs (sde47): mounted filesystem without journal. Opts: barrier=1
1541[ 11.329655] FAT-fs (sde24): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
1542[ 11.333905] FAT-fs (sde46): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
1543[ 11.349404] EXT4-fs (sde44): mounted filesystem with ordered data mode. Opts: barrier=1
1544[ 11.550401] get prop 146 is not supported in usb
1545[ 11.670488] get prop 146 is not supported in usb
1546[ 11.790445] get prop 146 is not supported in usb
1547[ 12.083994] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1548[ 12.100202] droid-hal-init: init first stage started!
1549[ 12.100234] droid-hal-init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
1550[ 12.102333] droid-hal-init: init second stage started!
1551[ 12.110910] droid-hal-init: Using Android DT directory /proc/device-tree/firmware/android/
1552[ 12.118018] selinux: SELinux: Loaded file_contexts
1553
1554[ 12.118036] droid-hal-init: Running restorecon...
1555[ 12.118083] droid-hal-init: waitid failed: No child processes
1556[ 12.122379] droid-hal-init: Unable to set property '' to '' in property file '/product/build.prop': Illegal property name
1557[ 12.122414] droid-hal-init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
1558[ 12.122869] droid-hal-init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
1559[ 12.123734] droid-hal-init: Forked subcontext for 'u:r:vendor_init:s0' with pid 3857
1560[ 12.124456] droid-hal-init: Forked subcontext for 'u:r:vendor_init:s0' with pid 3858
1561[ 12.160649] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1562[ 12.165007] Mass Storage Function, version: 2009/09/11
1563[ 12.165016] LUN: removable file: (no medium)
1564[ 12.165069] file system registered
1565[ 12.170514] Gadget function do not bind yet.
1566[ 12.216743] Registered swp emulation handler
1567[ 12.246625] droid-hal-init: wait for '/dev/block/platform/soc/1d84000.ufshc' took 0ms
1568[ 12.290335] get prop 146 is not supported in usb
1569[ 12.305342] logd.auditd: start
1570[ 12.305359] logd.klogd: 12305340358
1571[ 12.333135] wlan: module is from the staging directory, the quality is unknown, you have been warned.
1572[ 12.342140] binder: 3866:3866 ioctl 4018620d 7fc047c2a0 returned -22
1573[ 12.349541] QSEECOM: qseecom_register_listener: Service 8192 is registered
1574[ 12.349814] QSEECOM: qseecom_register_listener: Service 12288 is registered
1575[ 12.350658] QSEECOM: qseecom_register_listener: Service 16384 is registered
1576[ 12.363639] QSEECOM: qseecom_register_listener: Service 11 is registered
1577[ 12.364154] QSEECOM: qseecom_register_listener: Service 10 is registered
1578[ 12.365442] QSEECOM: qseecom_register_listener: Service 28672 is registered
1579[ 12.366693] QSEECOM: qseecom_register_listener: Service 36864 is registered
1580[ 12.368512] QSEECOM: qseecom_register_listener: Service 45056 is registered
1581[ 12.372270] QSEECOM: qseecom_register_listener: Service 4352 is registered
1582[ 12.388060] capability: warning: `ofonod' uses 32-bit capabilities (legacy support in use)
1583[ 12.393857] using random self ethernet address
1584[ 12.393869] using random host ethernet address
1585[ 12.394379] rndis0: HOST MAC 5e:a9:3e:38:25:46
1586[ 12.394417] rndis0: MAC aa:70:5e:21:85:dc
1587[ 12.407194] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1588[ 12.413948] IPA smmu_info.s1_bypass_arr[AP]=1 smmu_info.fast_map=0
1589[ 12.414636] IPA smmu_info.s1_bypass_arr[WLAN]=1 smmu_info.fast_map=0
1590[ 12.416207] IPA smmu_info.s1_bypass_arr[UC]=1 smmu_info.fast_map=0
1591[ 12.417862] ipa ipa3_uc_state_check:284 uC interface not initialized
1592[ 12.419340] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: loading from 0x000000008c400000 to 0x000000008c405000
1593[ 12.458023] subsys-pil-tz soc:qcom,ipa_fws: ipa_fws: Brought out of reset
1594[ 12.458068] ipa ipa3_uc_state_check:284 uC interface not initialized
1595[ 12.458325] IPA FW loaded successfully
1596[ 12.458618] ipa ipa3_uc_state_check:284 uC interface not initialized
1597[ 12.462911] CHRDEV "ipaNatTable" major number 216 goes below the dynamic allocation range
1598[ 12.480333] ipa ipa3_set_resorce_groups_min_max_limits:4956 skip configuring ipa_rx_hps_clients from HLOS
1599[ 12.480612] gsi soc:qcom,msm_gsi: gsi_register_device:839 GSI irq is wake enabled 110
1600[ 12.493528] CHRDEV "ipa_tethering_bridge" major number 215 goes below the dynamic allocation range
1601[ 12.501514] IPA driver initialization was successful.
1602[ 12.501536] rmnet_ipa3 started initialization
1603[ 12.501543] IPA SSR support = True
1604[ 12.501547] IPA ipa-loaduC = True
1605[ 12.501551] IPA SG support = True
1606[ 12.501555] IPA Napi Enable = True
1607[ 12.501559] using default for wan-rx-desc-size = 256
1608[ 12.502078] subsys-pil-tz 17300000.qcom,lpass: adsp: Failed to locate adsp.mdt(rc:-2)
1609[ 12.502240] adsp-loader soc:qcom,msm-adsp-loader: adsp_load_fw: pil get failed,
1610[ 12.502246] adsp-loader soc:qcom,msm-adsp-loader: adsp_load_fw: Q6 image loading failed
1611[ 12.502354] subsys-restart: __subsystem_get(): Changing subsys fw_name to slpi_br
1612[ 12.502525] subsys-pil-tz 8300000.qcom,turing: cdsp: Failed to locate cdsp.mdt(rc:-2)
1613[ 12.502898] subsys-pil-tz 5c00000.qcom,ssc: slpi: Failed to locate slpi_br.mdt(rc:-2)
1614[ 12.502976] cdsp-loader soc:qcom,msm-cdsp-loader: cdsp_load_fw: pil get failed,
1615[ 12.502979] cdsp-loader soc:qcom,msm-cdsp-loader: cdsp_load_fw: CDSP image loading failed
1616[ 12.503117] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: pil get failed,
1617[ 12.503122] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: SLPI image loading failed
1618[ 12.511210] logd.daemon: reinit
1619[ 12.511435] CHRDEV "wwan_ioctl" major number 214 goes below the dynamic allocation range
1620[ 12.514951] rmnet_ipa completed initialization
1621[ 12.534395] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
1622[ 12.534463] android_work: sent uevent USB_STATE=DISCONNECTED
1623[ 12.572174] ipa ipa3_uc_state_check:289 uC is not loaded
1624[ 12.597903] wlan: Loading driver v5.1.1.73W ()
1625[ 12.616374] CHRDEV "qcwlanstate" major number 213 goes below the dynamic allocation range
1626[ 12.616874] wlan_hdd_state wlan major(213) initialized
1627[ 12.616878] wlan: driver loaded
1628[ 12.661457] android_work: sent uevent USB_STATE=CONNECTED
1629[ 12.665161] android_work: sent uevent USB_STATE=DISCONNECTED
1630[ 12.804306] android_work: sent uevent USB_STATE=CONNECTED
1631[ 12.810216] configfs-gadget gadget: high-speed config #1: c
1632[ 12.810667] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1633[ 12.812019] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
1634[ 12.812055] android_work: sent uevent USB_STATE=CONFIGURED
1635[ 12.901608] rmt_storage:INFO:check_support_using_libmdm: Modem subsystem found on target!
1636[ 12.902201] rmt_storage:INFO:main: Done with init now waiting for messages!
1637[ 12.930654] QSEECOM: __qseecom_get_fw_size: error with request_firmware
1638[ 12.930667] QSEECOM: qseecom_load_app: failed to load cmnlib64
1639[ 12.930671] QSEECOM: qseecom_ioctl: failed load_app request: -5
1640[ 12.940952] QSEECOM: __qseecom_get_fw_size: error with request_firmware
1641[ 12.940959] QSEECOM: qseecom_load_app: failed to load cmnlib64
1642[ 12.940962] QSEECOM: qseecom_ioctl: failed load_app request: -5
1643[ 12.962217] QSEECOM: qseecom_load_app: App (mlipay) does'nt exist, loading apps for first time
1644[ 12.990014] Mass Storage Function, version: 2009/09/11
1645[ 12.990069] LUN: removable file: (no medium)
1646[ 12.990590] servloc: service_locator_svc_arrive: Connection established with the Service locator
1647[ 12.990609] servloc: init_service_locator: Service locator initialized
1648[ 12.996511] audio_notifer_reg_service: service PDR_ADSP is in use
1649[ 13.015865] QSEECOM: qseecom_load_app: App with id 2 (mlipay) now loaded
1650[ 13.023761] CHRDEV "msm_usb_bridge" major number 211 goes below the dynamic allocation range
1651[ 13.028905] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
1652[ 13.033684] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
1653[ 13.037749] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
1654[ 13.046750] subsys-restart: __subsystem_get(): Changing subsys fw_name to spss2p
1655[ 13.047064] subsys-pil-tz 188101c.qcom,spss: spss: Failed to locate spss2p.mdt(rc:-2)
1656[ 13.047743] QSEECOM: qseecom_unload_app: App id 2 now unloaded
1657[ 13.167751] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
1658[ 13.167773] ipa-wan ipa3_ssr_notifier_cb:2724 IPA received MPSS BEFORE_POWERUP
1659[ 13.169411] ipa ipa3_uc_state_check:289 uC is not loaded
1660[ 13.169434] ipa-wan ipa3_ssr_notifier_cb:2736 IPA BEFORE_POWERUP handling is complete
1661[ 13.169736] pil-q6v5-mss 4080000.qcom,mss: modem: Failed to locate modem.mdt(rc:-2)
1662[ 13.209804] SOH-D: opened /mnt/vendor/persist/hvdcp_opti/soh_info.txt
1663[ 13.209820] SOH-D: NULL string while reading soh_info.txt
1664[ 13.209823] SOH-D: Error in restoring soh_info
1665[ 13.209854] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_actual rc = -2
1666[ 13.209863] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_nominal rc = -2
1667[ 13.209899] SOH-D: Registered SOH (hvdcp_opti)!
1668[ 13.210003] STD-PD: Registered STD_PD
1669[ 13.210279] HVDCP2: Not valid charger for hvdcp2.
1670[ 13.210371] hvdcpd: Not valid charger for hvdcp3.
1671[ 13.210641] CP: cp temperature missing
1672[ 13.211183] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1673[ 13.212333] USB_PSY_VOTER: val: 500000
1674[ 13.214552] QCOM-BATT: split_settled: Couldn't get split current rc=-22
1675[ 13.226565] QSEECOM: __qseecom_get_fw_size: error with request_firmware
1676[ 13.226574] QSEECOM: qseecom_load_app: failed to load cmnlib64
1677[ 13.226576] QSEECOM: qseecom_ioctl: failed load_app request: -5
1678[ 13.242140] QSEECOM: __qseecom_get_fw_size: error with request_firmware
1679[ 13.242148] QSEECOM: qseecom_load_app: failed to load cmnlib64
1680[ 13.242151] QSEECOM: qseecom_ioctl: failed load_app request: -5
1681[ 13.249381] soc:fingerprint_fpc supply vdd_ana not found, using dummy regulator
1682[ 13.249414] fpc1020 soc:fingerprint_fpc: fp_vdd_vreg is enabled!
1683[ 13.254557] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
1684[ 13.254625] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
1685[ 13.254627] Implicit grants are deprecated and will be removed in the future.
1686[ 13.264206] fpc1020 soc:fingerprint_fpc: IRQ after reset 1
1687[ 13.268085] droid-hal-init: property 'persist.vendor.usb.config' doesn't exist while expanding '${persist.vendor.usb.config}'
1688[ 13.278621] QSEECOM: __qseecom_get_fw_size: error with request_firmware
1689[ 13.278629] QSEECOM: qseecom_load_app: failed to load cmnlib64
1690[ 13.278631] QSEECOM: qseecom_ioctl: failed load_app request: -5
1691[ 13.280684] QSEECOM: __qseecom_get_fw_size: error with request_firmware
1692[ 13.280697] QSEECOM: qseecom_load_app: failed to load cmnlib64
1693[ 13.280702] QSEECOM: qseecom_ioctl: failed load_app request: -5
1694[ 13.291932] subsys-pil-tz soc:qcom,kgsl-hyp: a630_zap: loading from 0x000000008c415000 to 0x000000008c416000
1695[ 13.332064] subsys-pil-tz soc:qcom,kgsl-hyp: a630_zap: Brought out of reset
1696[ 13.342659] QSEECOM: qseecom_load_app: App (fpcber) does'nt exist, loading apps for first time
1697[ 13.344913] thermal_icl_ua is 1800000, chg->system_temp_level: 5
1698[ 13.344918] USB_PSY_VOTER: val: 500000
1699[ 13.344918] THERMAL_DAEMON_VOTER: val: 1800000
1700[ 13.406365] QSEECOM: qseecom_load_app: App with id 3 (fpcber) now loaded
1701[ 13.412656] input: uinput-fpc as /devices/virtual/input/input5
1702[ 13.551872] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1703[ 13.701123] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1704[ 13.701716] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1705[ 13.820432] get prop 146 is not supported in usb
1706[ 13.860107] CPU5: update max cpu_capacity 967
1707[ 13.880623] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1708[ 13.880938] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1709[ 14.050288] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1710[ 14.050615] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1711[ 14.150312] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1712[ 14.150842] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1713[ 14.250314] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1714[ 14.370051] CPU5: update max cpu_capacity 932
1715[ 14.650890] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1716[ 14.860488] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1717[ 14.880070] CPU5: update max cpu_capacity 904
1718[ 14.960163] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1719[ 14.960481] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1720[ 15.040152] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1721[ 15.040441] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1722[ 15.090192] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1723[ 15.090411] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1724[ 15.097458] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1725[ 15.130201] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1726[ 15.130673] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1727[ 15.171918] thermal_icl_ua is 1800000, chg->system_temp_level: 7
1728[ 15.190048] CPU5: update max cpu_capacity 876
1729[ 15.202147] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1730[ 15.202157] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1731[ 15.202162] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1732[ 15.202167] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1733[ 15.210208] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1734[ 15.230069] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1735[ 15.253714] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1736[ 15.341565] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1737[ 15.760063] CPU5: update max cpu_capacity 848
1738[ 15.840167] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:0.
1739[ 15.840171] FG: soc_monitor_work: soc:98, raw_soc:98, c:-15624, s:1
1740[ 16.140521] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1741[ 16.190208] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1742[ 16.190296] CPU5: update max cpu_capacity 820
1743[ 16.190422] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1744[ 16.220257] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1745[ 16.220488] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1746[ 16.250201] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1747[ 16.250437] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1748[ 16.310181] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1749[ 16.310545] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1750[ 16.380221] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1751[ 16.960192] CPU5: update max cpu_capacity 792
1752[ 17.335246] CPU5: update max cpu_capacity 764
1753[ 17.470448] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1754[ 17.550241] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1755[ 17.550465] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1756[ 17.620208] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1757[ 17.620386] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1758[ 17.660219] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1759[ 17.660425] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1760[ 17.700214] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1761[ 17.700583] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1762[ 17.740226] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1763[ 18.163229] droid-hal-init: starting service 'vendor.livedisplay-hal-2-0-sdm'...
1764[ 18.240091] PL_AWAKE: current vote is now 0 voted by PL_VOTER,0,previous voted 0
1765[ 18.400083] [NVT-ts] update_firmware_request 52: filename is novatek_nt36672_e10_hw01.fw
1766[ 18.470104] [NVT-ts] Resume_PD 186: Resume PD OK
1767[ 18.650786] [NVT-ts] Check_CheckSum 290: firmware checksum match
1768[ 18.700381] [NVT-ts] Init_BootLoader 343: Init OK
1769[ 18.770100] [NVT-ts] Resume_PD 186: Resume PD OK
1770[ 18.850436] [NVT-ts] nvt_check_flash_end_flag 967: nvt_end_flag=NVT (4E 56 54)
1771[ 18.950346] get prop 146 is not supported in usb
1772[ 19.060712] diag: In diag_ioctl_set_buffering_mode, peripheral 3 doesn't support buffering
1773[ 19.680066] QNOVO_CHG_READY: current vote is now 1 voted by USB_READY_VOTER,0,previous voted 1
1774[ 19.680070] QNOVO_NOT_OK: current vote is now 0 voted by CHG_READY_VOTER,0,previous voted 0
1775[ 19.680194] QNOVO_AWAKE: current vote is now 0 voted by USB_READY_VOTER,1,previous voted 0
1776[ 21.060085] CPU5: update max cpu_capacity 673
1777[ 22.767495] [drm:sde_format_check_modified_format] *ERROR* buffers total size too small 9777152 expected 9891840
1778[ 22.768900] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_UNBLANK
1779[ 22.768945] [NVT-ts] nvt_ts_resume 2052: Touch is already resume
1780[ 23.964759] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5125] was attempted by "crash_dump32 4232 5121 1"[5123]
1781[ 24.057356] logd: logdr: UID=1047 GID=1005 PID=5123 n tail=50 logMask=8 pid=4232 start=0ns timeout=0ns
1782[ 24.058367] logd: logdr: UID=1047 GID=1005 PID=5123 n tail=50 logMask=1 pid=4232 start=0ns timeout=0ns
1783[ 24.079016] logd: logdr: UID=1047 GID=1005 PID=5123 n tail=0 logMask=8 pid=4232 start=0ns timeout=0ns
1784[ 24.079849] logd: logdr: UID=1047 GID=1005 PID=5123 n tail=0 logMask=1 pid=4232 start=0ns timeout=0ns
1785[ 24.103788] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 4232) received signal 6
1786[ 24.103812] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 4232) process group... HYBRIS: killing PID instead of process group.
1787[ 24.104798] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1788[ 24.106413] droid-hal-init: couldn't write 5133 to /dev/cpuset/camera-daemon/tasks: No space left on device
1789[ 24.209680] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1790[ 24.686555] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1791[ 24.800826] FG: soc_work_fn: adjust_soc: s 98 r 160644 i 218749 v 4259754 t 350 cc 0 m 0xfb
1792[ 24.800831] FG: soc_work_fn: adjust_soc: 000: 63, f8, 1f, 33
1793[ 24.800833] FG: soc_work_fn: adjust_soc: 019: bf, ff, 00, 00
1794[ 24.800835] FG: soc_work_fn: adjust_soc: 079: 00, 00, 00, 09
1795[ 24.923229] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1796[ 24.987665] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1797[ 24.987675] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1798[ 24.987679] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1799[ 24.987683] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1800[ 25.020157] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1801[ 25.043577] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1802[ 25.109598] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1803[ 26.080170] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:0.
1804[ 26.080175] FG: soc_monitor_work: soc:98, raw_soc:98, c:3906, s:1
1805[ 29.080364] get prop 146 is not supported in usb
1806[ 33.718652] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5199] was attempted by "crash_dump32 5133 5195 1"[5197]
1807[ 33.809995] logd: logdr: UID=1047 GID=1005 PID=5197 n tail=50 logMask=8 pid=5133 start=0ns timeout=0ns
1808[ 33.810938] logd: logdr: UID=1047 GID=1005 PID=5197 n tail=50 logMask=1 pid=5133 start=0ns timeout=0ns
1809[ 33.831249] logd: logdr: UID=1047 GID=1005 PID=5197 n tail=0 logMask=8 pid=5133 start=0ns timeout=0ns
1810[ 33.831934] logd: logdr: UID=1047 GID=1005 PID=5197 n tail=0 logMask=1 pid=5133 start=0ns timeout=0ns
1811[ 33.855197] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5133) received signal 6
1812[ 33.855220] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5133) process group... HYBRIS: killing PID instead of process group.
1813[ 33.856198] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1814[ 33.857635] droid-hal-init: couldn't write 5204 to /dev/cpuset/camera-daemon/tasks: No space left on device
1815[ 33.954271] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1816[ 34.454415] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1817[ 34.689541] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1818[ 34.753528] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1819[ 34.753538] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1820[ 34.753542] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1821[ 34.753546] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1822[ 34.780214] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1823[ 34.804058] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1824[ 34.870096] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1825[ 36.320163] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:0.
1826[ 36.320169] FG: soc_monitor_work: soc:98, raw_soc:98, c:29785, s:1
1827[ 38.730127] msm-dsi-panel:[panel_disp_param_send_lock:4469] dimmingon
1828[ 38.930073] dsi-ctrl:[dsi_message_tx] [DSI_0]Command transfer failed
1829[ 38.930090] dsi-ctrl:[dsi_ctrl_cmd_transfer] command msg transfer failed, rc = -110
1830[ 38.930097] msm-dsi-display:[dsi_host_transfer] [dsi_tianma_fhd_nt36672a_video_display] cmd transfer failed, rc=-110
1831[ 38.930106] msm-dsi-panel:[dsi_panel_tx_cmd_set:606] failed to set cmds(47), rc=-110
1832[ 38.938242] [NVT-ts] nvt_ts_suspend 1977: start
1833[ 38.990066] [NVT-ts] nvt_ts_suspend 2035: end
1834[ 39.050334] msm-dsi-panel:[dsi_panel_disable:4888] [LCD] dsi_panel_disable: DSI_CMD_SET_OFF
1835[ 39.058890] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_POWERDOWN
1836[ 39.059269] thermal_icl_ua is 1800000, chg->system_temp_level: 6
1837[ 39.160324] get prop 146 is not supported in usb
1838[ 42.800488] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1839[ 42.850229] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6tnl0
1840[ 42.850472] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1841[ 42.902772] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 668 registered
1842[ 42.920228] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
1843[ 42.920510] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1844[ 42.980234] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip6_vti0
1845[ 42.980459] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1846[ 42.997868] msm-dsi-panel:[dsi_panel_enable:4802] [LCD] dsi_panel_enable: DSI_CMD_SET_ON
1847[ 42.997875] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_UNBLANK
1848[ 42.997918] [NVT-ts] nvt_ts_resume 2058: start
1849[ 42.998170] thermal_icl_ua is 1800000, chg->system_temp_level: 7
1850[ 43.012967] WLED OVP fault detected, int_sts=2 fault_sts= 2
1851[ 43.050239] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ip_vti0
1852[ 43.050730] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1853[ 43.061090] [NVT-ts] nvt_ts_resume 2088: end
1854[ 43.110143] msm-dsi-panel:[panel_disp_param_send_lock:4469] dimmingon
1855[ 43.130282] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
1856[ 43.482342] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5378] was attempted by "crash_dump32 5204 5374 1"[5376]
1857[ 43.574273] logd: logdr: UID=1047 GID=1005 PID=5376 n tail=50 logMask=8 pid=5204 start=0ns timeout=0ns
1858[ 43.575330] logd: logdr: UID=1047 GID=1005 PID=5376 n tail=50 logMask=1 pid=5204 start=0ns timeout=0ns
1859[ 43.596003] logd: logdr: UID=1047 GID=1005 PID=5376 n tail=0 logMask=8 pid=5204 start=0ns timeout=0ns
1860[ 43.596874] logd: logdr: UID=1047 GID=1005 PID=5376 n tail=0 logMask=1 pid=5204 start=0ns timeout=0ns
1861[ 43.612425] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5204) received signal 6
1862[ 43.612448] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5204) process group... HYBRIS: killing PID instead of process group.
1863[ 43.613476] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1864[ 43.614952] droid-hal-init: couldn't write 5384 to /dev/cpuset/camera-daemon/tasks: No space left on device
1865[ 43.713007] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1866[ 44.213592] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1867[ 44.449513] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1868[ 44.513594] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1869[ 44.513603] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1870[ 44.513607] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1871[ 44.513610] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1872[ 44.540150] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1873[ 44.561956] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1874[ 44.628708] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1875[ 45.280952] FG: soc_work_fn: adjust_soc: s 98 r 160156 i 18554 v 4299549 t 350 cc 0 m 0xfb
1876[ 45.280957] FG: soc_work_fn: adjust_soc: 000: 63, f8, 1f, 33
1877[ 45.280985] FG: soc_work_fn: adjust_soc: 019: bf, ff, 00, 00
1878[ 45.280987] FG: soc_work_fn: adjust_soc: 079: 00, 00, 00, 09
1879[ 46.560162] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:0.
1880[ 46.560168] FG: soc_monitor_work: soc:98, raw_soc:98, c:18554, s:1
1881[ 48.419984] droid-hal-init: processing action (sys.boot_completed=1) from (/init.rc:729)
1882[ 48.420199] droid-hal-init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.qcom.rc:535)
1883[ 48.420788] Boot completed
1884[ 48.428114] droid-hal-init: starting service 'qcom-post-boot'...
1885[ 48.429914] droid-hal-init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.qcom.power.rc:246)
1886[ 48.430263] droid-hal-init: processing action (sys.boot_completed=1 && sys.logbootcomplete=1) from (/system/etc/init/bootstat.rc:70)
1887[ 48.430391] droid-hal-init: starting service 'exec 4 (/system/bin/bootstat --set_system_boot_reason --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'...
1888[ 49.290465] get prop 146 is not supported in usb
1889[ 50.630126] CPU6: update max cpu_capacity 701
1890[ 50.881150] CPU6: update max cpu_capacity 729
1891[ 51.680910] CPU7: update max cpu_capacity 764
1892[ 53.310215] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5544] was attempted by "crash_dump32 5384 5540 1"[5542]
1893[ 53.399442] logd: logdr: UID=1047 GID=1005 PID=5542 n tail=50 logMask=8 pid=5384 start=0ns timeout=0ns
1894[ 53.403712] logd: logdr: UID=1047 GID=1005 PID=5542 n tail=50 logMask=1 pid=5384 start=0ns timeout=0ns
1895[ 53.426106] logd: logdr: UID=1047 GID=1005 PID=5542 n tail=0 logMask=8 pid=5384 start=0ns timeout=0ns
1896[ 53.429868] logd: logdr: UID=1047 GID=1005 PID=5542 n tail=0 logMask=1 pid=5384 start=0ns timeout=0ns
1897[ 53.462680] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5384) received signal 6
1898[ 53.462710] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5384) process group... HYBRIS: killing PID instead of process group.
1899[ 53.464213] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1900[ 53.466390] droid-hal-init: couldn't write 5549 to /dev/cpuset/camera-daemon/tasks: No space left on device
1901[ 53.675499] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1902[ 54.191633] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1903[ 54.467122] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1904[ 54.556725] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1905[ 54.556746] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1906[ 54.556754] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1907[ 54.556762] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1908[ 54.591148] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1909[ 54.624462] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1910[ 54.702648] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1911[ 55.216938] thermal_icl_ua is 1800000, chg->system_temp_level: 5
1912[ 56.800676] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:1.
1913[ 56.800701] FG: soc_monitor_work: soc:98, raw_soc:98, c:-121093, s:1
1914[ 59.441006] get prop 146 is not supported in usb
1915[ 63.489564] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5605] was attempted by "crash_dump32 5549 5601 1"[5603]
1916[ 63.583425] logd: logdr: UID=1047 GID=1005 PID=5603 n tail=50 logMask=8 pid=5549 start=0ns timeout=0ns
1917[ 63.587759] logd: logdr: UID=1047 GID=1005 PID=5603 n tail=50 logMask=1 pid=5549 start=0ns timeout=0ns
1918[ 63.612131] logd: logdr: UID=1047 GID=1005 PID=5603 n tail=0 logMask=8 pid=5549 start=0ns timeout=0ns
1919[ 63.615766] logd: logdr: UID=1047 GID=1005 PID=5603 n tail=0 logMask=1 pid=5549 start=0ns timeout=0ns
1920[ 63.646959] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5549) received signal 6
1921[ 63.647050] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5549) process group... HYBRIS: killing PID instead of process group.
1922[ 63.649424] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1923[ 63.651433] droid-hal-init: couldn't write 5610 to /dev/cpuset/camera-daemon/tasks: No space left on device
1924[ 63.815023] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1925[ 63.890777] CPU7: update max cpu_capacity 792
1926[ 64.310975] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1927[ 64.400117] CPU7: update max cpu_capacity 820
1928[ 64.481400] smb:01:1000 03 80 00 79 70 96 36 70 f4 00 ff ff 00 00 03 03 00 00 00 00 00 38 02 3f 40 7f 00 00 00 00 00 00 00 00 00 00 00 06 70 03 02 00 00 00 00 00 00 00 00 00 00 00 00 79
1929[ 64.482162] smb:01:1100 34 13 81 00 00 00 00 00 00 00 00 0f 0f 0f 00 0f 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 28
1930[ 64.482468] smb:01:1200 00 ff ff fe 00 3f 3f 00 00 00 00 00 00 00 00 03 03 00 01 00
1931[ 64.483148] smb:01:1300 01 01 01 01 00 80 10 80 53 08 10 ff 1f 00 ff ff 00 00 00 00 00 00 00 48 33 1b 47 00 00 00 00 00 00 1d b8 75 e5 02 04 34 7f 00 00 00 00 00 00 13 d4 00 00 00 00
1932[ 64.483949] smb:01:1600 02 14 00 00 41 95 01 00 00 00 a8 de de 00 00 00 00 00 42 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 04 02 00 07 00 00 00 00 00 00 03 00 00 00 00 02 00 00 00 22
1933[ 64.484269] smb:01:1700 00 7f 7f 00 00 7f 7f 00 00 00 00 01 00 00 00 00 00 01 00 00 00 00 21 01
1934[ 64.574661] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1935[ 64.664501] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1936[ 64.664555] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1937[ 64.664582] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1938[ 64.664609] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1939[ 64.700409] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1940[ 64.732019] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1941[ 64.987410] thermal_icl_ua is 1800000, chg->system_temp_level: 3
1942[ 65.032810] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1943[ 65.667455] CPU7: update max cpu_capacity 876
1944[ 65.762248] FG: soc_work_fn: adjust_soc: s 98 r 158935 i -114746 v 4328113 t 360 cc 0 m 0xfb
1945[ 65.762264] FG: soc_work_fn: adjust_soc: 000: 63, f8, 1f, 33
1946[ 65.762276] FG: soc_work_fn: adjust_soc: 019: bf, ff, 00, 00
1947[ 65.762287] FG: soc_work_fn: adjust_soc: 079: 00, 00, 00, 09
1948[ 66.081653] CPU6: update max cpu_capacity 904
1949[ 66.881373] CPU6: update max cpu_capacity 932
1950[ 67.040537] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:1.
1951[ 67.040555] FG: soc_monitor_work: soc:98, raw_soc:98, c:-114746, s:1
1952[ 67.669232] CPU6: update max cpu_capacity 967
1953[ 69.601195] get prop 146 is not supported in usb
1954[ 73.783650] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5670] was attempted by "crash_dump32 5610 5666 1"[5668]
1955[ 73.857199] logd: logdr: UID=1047 GID=1005 PID=5668 n tail=50 logMask=8 pid=5610 start=0ns timeout=0ns
1956[ 73.860996] logd: logdr: UID=1047 GID=1005 PID=5668 n tail=50 logMask=1 pid=5610 start=0ns timeout=0ns
1957[ 73.879765] logd: logdr: UID=1047 GID=1005 PID=5668 n tail=0 logMask=8 pid=5610 start=0ns timeout=0ns
1958[ 73.883589] logd: logdr: UID=1047 GID=1005 PID=5668 n tail=0 logMask=1 pid=5610 start=0ns timeout=0ns
1959[ 73.920791] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5610) received signal 6
1960[ 73.920845] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5610) process group... HYBRIS: killing PID instead of process group.
1961[ 73.923131] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1962[ 73.926895] droid-hal-init: couldn't write 5675 to /dev/cpuset/camera-daemon/tasks: No space left on device
1963[ 74.119925] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1964[ 74.540001] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1965[ 74.766163] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1966[ 74.851207] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1967[ 74.851227] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1968[ 74.851236] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1969[ 74.851244] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1970[ 74.881318] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1971[ 74.915106] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1972[ 74.976945] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
1973[ 77.281222] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:1.
1974[ 77.281244] FG: soc_monitor_work: soc:98, raw_soc:98, c:-130859, s:1
1975[ 78.555291] [NVT-ts] nvt_ts_suspend 1977: start
1976[ 78.610196] [NVT-ts] nvt_ts_suspend 2035: end
1977[ 78.671074] msm-dsi-panel:[dsi_panel_disable:4888] [LCD] dsi_panel_disable: DSI_CMD_SET_OFF
1978[ 78.680610] thermal_sys: screen_state_for_thermal_callback: DRM_BLANK_POWERDOWN
1979[ 78.682028] thermal_icl_ua is 1800000, chg->system_temp_level: 2
1980[ 79.761054] get prop 146 is not supported in usb
1981[ 83.734005] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5752] was attempted by "crash_dump32 5675 5748 1"[5750]
1982[ 83.807889] logd: logdr: UID=1047 GID=1005 PID=5750 n tail=50 logMask=8 pid=5675 start=0ns timeout=0ns
1983[ 83.812313] logd: logdr: UID=1047 GID=1005 PID=5750 n tail=50 logMask=1 pid=5675 start=0ns timeout=0ns
1984[ 83.831610] logd: logdr: UID=1047 GID=1005 PID=5750 n tail=0 logMask=8 pid=5675 start=0ns timeout=0ns
1985[ 83.834650] logd: logdr: UID=1047 GID=1005 PID=5750 n tail=0 logMask=1 pid=5675 start=0ns timeout=0ns
1986[ 83.900247] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5675) received signal 6
1987[ 83.900277] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5675) process group... HYBRIS: killing PID instead of process group.
1988[ 83.903014] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
1989[ 83.907083] droid-hal-init: couldn't write 5757 to /dev/cpuset/camera-daemon/tasks: No space left on device
1990[ 84.048566] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
1991[ 84.468391] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
1992[ 84.685986] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
1993[ 84.772685] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
1994[ 84.772708] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
1995[ 84.772717] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
1996[ 84.772726] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
1997[ 84.811167] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
1998[ 84.846272] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
1999[ 84.915241] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
2000[ 86.242508] FG: soc_work_fn: adjust_soc: s 98 r 175781 i -311034 v 4358143 t 350 cc 0 m 0xfc
2001[ 86.242529] FG: soc_work_fn: adjust_soc: 000: 63, f8, 1f, 33
2002[ 86.242541] FG: soc_work_fn: adjust_soc: 019: bf, ff, 00, 00
2003[ 86.242552] FG: soc_work_fn: adjust_soc: 079: 00, 00, 00, 09
2004[ 86.246390] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_actual rc = -2
2005[ 86.246479] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_nominal rc = -2
2006[ 86.247570] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
2007[ 86.248019] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
2008[ 86.248703] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_actual rc = -2
2009[ 86.248773] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_nominal rc = -2
2010[ 87.520649] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:1.
2011[ 87.520672] FG: soc_monitor_work: soc:98, raw_soc:98, c:-360839, s:1
2012[ 91.356265] USB_PSY_VOTER: val: 500000
2013[ 93.673692] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5810] was attempted by "crash_dump32 5757 5806 1"[5808]
2014[ 93.681277] droid-hal-init: Service 'chre' (pid 4479) exited with status 44
2015[ 93.681324] droid-hal-init: Sending signal 9 to service 'chre' (pid 4479) process group... HYBRIS: killing PID instead of process group.
2016[ 93.682463] droid-hal-init: starting service 'chre'...
2017[ 93.685171] droid-hal-init: Created socket '/dev/socket/chre', mode 660, user 0, group 1000
2018[ 93.746149] logd: logdr: UID=1047 GID=1005 PID=5808 n tail=50 logMask=8 pid=5757 start=0ns timeout=0ns
2019[ 93.750003] logd: logdr: UID=1047 GID=1005 PID=5808 n tail=50 logMask=1 pid=5757 start=0ns timeout=0ns
2020[ 93.768957] logd: logdr: UID=1047 GID=1005 PID=5808 n tail=0 logMask=8 pid=5757 start=0ns timeout=0ns
2021[ 93.772144] logd: logdr: UID=1047 GID=1005 PID=5808 n tail=0 logMask=1 pid=5757 start=0ns timeout=0ns
2022[ 93.847315] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5757) received signal 6
2023[ 93.847351] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5757) process group... HYBRIS: killing PID instead of process group.
2024[ 93.848882] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
2025[ 93.851798] droid-hal-init: couldn't write 5819 to /dev/cpuset/camera-daemon/tasks: No space left on device
2026[ 93.995985] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
2027[ 94.410545] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
2028[ 94.650942] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
2029[ 94.743517] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
2030[ 94.743541] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
2031[ 94.743550] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
2032[ 94.743559] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
2033[ 94.780894] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
2034[ 94.816335] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
2035[ 94.877245] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
2036[ 96.410909] get prop 146 is not supported in usb
2037[ 97.761010] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:1.
2038[ 97.761034] FG: soc_monitor_work: soc:98, raw_soc:98, c:-374999, s:1
2039[ 103.647335] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5873] was attempted by "crash_dump32 5819 5869 1"[5871]
2040[ 103.726401] logd: logdr: UID=1047 GID=1005 PID=5871 n tail=50 logMask=8 pid=5819 start=0ns timeout=0ns
2041[ 103.730676] logd: logdr: UID=1047 GID=1005 PID=5871 n tail=50 logMask=1 pid=5819 start=0ns timeout=0ns
2042[ 103.748327] logd: logdr: UID=1047 GID=1005 PID=5871 n tail=0 logMask=8 pid=5819 start=0ns timeout=0ns
2043[ 103.752676] logd: logdr: UID=1047 GID=1005 PID=5871 n tail=0 logMask=1 pid=5819 start=0ns timeout=0ns
2044[ 103.805430] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5819) received signal 6
2045[ 103.805460] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5819) process group... HYBRIS: killing PID instead of process group.
2046[ 103.807059] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
2047[ 103.809081] droid-hal-init: couldn't write 5878 to /dev/cpuset/camera-daemon/tasks: No space left on device
2048[ 103.952986] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
2049[ 104.347298] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
2050[ 104.574110] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
2051[ 104.662947] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
2052[ 104.662971] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
2053[ 104.662980] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
2054[ 104.662989] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
2055[ 104.690897] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
2056[ 104.726253] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
2057[ 104.792325] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750
2058[ 106.580902] get prop 146 is not supported in usb
2059[ 106.722364] FG: soc_work_fn: adjust_soc: s 98 r 172851 i -355956 v 4373768 t 350 cc 0 m 0xfc
2060[ 106.722381] FG: soc_work_fn: adjust_soc: 000: 63, f8, 1f, 33
2061[ 106.722393] FG: soc_work_fn: adjust_soc: 019: bf, ff, 00, 00
2062[ 106.722404] FG: soc_work_fn: adjust_soc: 079: 00, 00, 00, 09
2063[ 107.140982] FG: fg_cycle_counter_update: batt_soc: 237 bucket: 7 chg_status: 1
2064[ 107.141597] FG: status_change_work: charge_status:1 charge_type:3 charge_done:0
2065[ 107.151488] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_actual rc = -2
2066[ 107.151640] SOH-D: Couldnt read /sys/class/power_supply/bms/esr_nominal rc = -2
2067[ 107.178394] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2068[ 107.178447] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2069[ 107.178472] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2070[ 107.178513] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2071[ 107.178536] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2072[ 107.178555] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2073[ 107.178569] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2074[ 107.178597] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2075[ 107.178607] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2076[ 107.178628] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2077[ 107.178643] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2078[ 107.178655] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2079[ 107.178665] ->rcu_read_unlock_special: 0x1 (b: 1, enq: 0 nq: 0)
2080[ 108.001041] FG: fg_battery_soc_smooth_tracking: soc:98, last_soc:98, raw_soc:98, soc_changed:1.
2081[ 108.001065] FG: soc_monitor_work: soc:98, raw_soc:98, c:-374999, s:1
2082[ 113.539283] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[5931] was attempted by "crash_dump32 5878 5927 1"[5929]
2083[ 113.618892] logd: logdr: UID=1047 GID=1005 PID=5929 n tail=50 logMask=8 pid=5878 start=0ns timeout=0ns
2084[ 113.623080] logd: logdr: UID=1047 GID=1005 PID=5929 n tail=50 logMask=1 pid=5878 start=0ns timeout=0ns
2085[ 113.641673] logd: logdr: UID=1047 GID=1005 PID=5929 n tail=0 logMask=8 pid=5878 start=0ns timeout=0ns
2086[ 113.644876] logd: logdr: UID=1047 GID=1005 PID=5929 n tail=0 logMask=1 pid=5878 start=0ns timeout=0ns
2087[ 113.699677] droid-hal-init: Service 'vendor.camera-provider-2-4' (pid 5878) received signal 6
2088[ 113.699709] droid-hal-init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 5878) process group... HYBRIS: killing PID instead of process group.
2089[ 113.701450] droid-hal-init: starting service 'vendor.camera-provider-2-4'...
2090[ 113.703532] droid-hal-init: couldn't write 5936 to /dev/cpuset/camera-daemon/tasks: No space left on device
2091[ 113.840465] CAM_INFO: CAM-ICP: cam_icp_mgr_hw_open: 2992 FW download done successfully
2092[ 114.262165] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:0,slave_addr:0x20,sensor_id:0x363
2093[ 114.489116] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:2,slave_addr:0x5a,sensor_id:0x3141
2094[ 114.572468] CAM_ERR: CAM-CCI: cam_cci_read: 1256 read_words = 0, exp words = 1
2095[ 114.572493] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1486 failed to read rc:-22
2096[ 114.572503] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 42 rc = -22
2097[ 114.572513] CAM_ERR: CAM-SENSOR: cam_sensor_match_id: 685 chip id 0 does not match 5e80
2098[ 114.610899] CAM_ERR: CAM-SENSOR: cam_sensor_init_subdev_do_ioctl: 91 cam_sensor_subdev_ioctl failed
2099[ 114.646066] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:1,slave_addr:0x5a,sensor_id:0x5e80
2100[ 114.716497] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 809 Probe success,slot:3,slave_addr:0xc0,sensor_id:0x7750