· 6 years ago · Jan 21, 2020, 09:50 AM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112]
2[ 0.000000] Linux version 5.5.0-rc6-ifc6640-arm64-dev (inforce@inforce-serve0
3[ 0.000000] Machine model: Inforce 6640 Single Board Computer
4[ 0.000000] efi: Getting EFI parameters from FDT:
5[ 0.000000] efi: UEFI not found.
6[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
7 gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps w)
8[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, B
9[ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id sl
10[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
11[ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000075b0000 (options '11)
12[ 0.000000] printk: bootconsole [msm_serial_dm0] enabled
13[ 0.000000] NUMA: No NUMA configuration found
14[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e44fff]
15[ 0.000000] NUMA: NODE_DATA [mem 0x17dc6a100-0x17dc6bfff]
16[ 0.000000] Zone ranges:
17[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
18[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
19[ 0.000000] Normal [mem 0x0000000100000000-0x000000017e44ffff]
20[ 0.000000] Movable zone start for each node
21[ 0.000000] Early memory node ranges
22[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
23[ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff]
24[ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e44ffff]
25[ 0.000000] Zeroed struct page in unavailable ranges: 432 pages
26[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e44ffff]
27[ 0.000000] On node 0 totalpages: 992080
28[ 0.000000] DMA zone: 3324 pages used for memmap
29[ 0.000000] DMA zone: 0 pages reserved
30[ 0.000000] DMA zone: 212736 pages, LIFO batch:63
31[ 0.000000] DMA32 zone: 4096 pages used for memmap
32[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
33[ 0.000000] Normal zone: 8082 pages used for memmap
34[ 0.000000] Normal zone: 517200 pages, LIFO batch:63
35[ 0.000000] psci: probing for conduit method from DT.
36[ 0.000000] psci: PSCIv1.0 detected in firmware.
37[ 0.000000] psci: Using standard PSCI v0.2 function IDs
38[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
39[ 0.000000] psci: SMC Calling Convention v1.0
40[ 0.000000] psci: OSI mode supported.
41[ 0.000000] percpu: Embedded 23 pages/cpu s53272 r8192 d32744 u94208
42[ 0.000000] pcpu-alloc: s53272 r8192 d32744 u94208 alloc=23*4096
43[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
44[ 0.000000] Detected PIPT I-cache on CPU0
45[ 0.000000] CPU features: detected: GIC system register CPU interface
46[ 0.000000] CPU features: detected: Qualcomm erratum 1009, ARM erratum 128687
47[ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratu3
48[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
49[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
50[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 976578
51[ 0.000000] Policy zone: Normal
52[ 0.000000] Kernel command line: earlycon root=PARTLABEL=rootfs console=tty00
53[ 0.000000] printk: log_buf_len: 4194304 bytes
54[ 0.000000] printk: early log buf free: 127360(97%)
55[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
56[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,)
57[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
58[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
59[ 0.000000] Memory: 3752328K/3968320K available (12476K kernel code, 2058K r)
60[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
61[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
62[ 0.000000] rcu: RCU event tracing is enabled.
63[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
64[ 0.000000] Tasks RCU enabled.
65[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
66[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
67[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
68[ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firme
69[ 0.000000] GICv3: 608 SPIs implemented
70[ 0.000000] GICv3: 0 Extended SPIs implemented
71[ 0.000000] GICv3: Distributor has no Range Selector support
72[ 0.000000] GICv3: 16 PPIs implemented
73[ 0.000000] GICv3: VLPI support, no direct LPI support
74[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
75[ 0.000000] ITS: No ITS available, not enabling LPIs
76[ 0.000000] random: get_random_bytes called from start_kernel+0x4b0/0x64c wi0
77[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/vir.
78[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
79[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398s
80[ 0.010898] Console: colour dummy device 80x25
81[ 0.019413] printk: console [tty0] enabled
82[ 0.023348] Calibrating delay loop (skipped), value calculated using timer f)
83[ 0.027369] pid_max: default: 32768 minimum: 301
84[ 0.037748] LSM: Security Framework initializing
85[ 0.042415] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, lin)
86[ 0.046983] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
87[ 0.078485] ASID allocator initialised with 65536 entries
88[ 0.086472] rcu: Hierarchical SRCU implementation.
89[ 0.096486] EFI services will not be available.
90[ 0.102533] smp: Bringing up secondary CPUs ...
91[ 0.135078] Detected PIPT I-cache on CPU1
92[ 0.135106] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
93[ 0.135145] CPU1: Booted secondary processor 0x0000000001 [0x511f2112]
94[ 0.170009] Detected PIPT I-cache on CPU2
95[ 0.170879] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
96[ 0.171799] CPU2: Booted secondary processor 0x0000000100 [0x511f2052]
97[ 0.209720] Detected PIPT I-cache on CPU3
98[ 0.210557] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
99[ 0.211440] CPU3: Booted secondary processor 0x0000000101 [0x511f2052]
100[ 0.215156] smp: Brought up 1 node, 4 CPUs
101[ 0.266526] SMP: Total of 4 processors activated.
102[ 0.270606] CPU features: detected: 32-bit EL0 Support
103[ 0.275390] CPU features: detected: CRC32 instructions
104[ 0.902708] CPU: All CPU(s) started at EL1
105[ 0.903214] alternatives: patching kernel code
106[ 0.914024] devtmpfs: initialized
107[ 0.922990] KASLR disabled due to lack of seed
108[ 0.923612] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
109[ 0.926350] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
110[ 0.936642] pinctrl core: initialized pinctrl subsystem
111[ 0.944399] thermal_sys: Registered thermal governor 'step_wise'
112[ 0.944405] thermal_sys: Registered thermal governor 'power_allocator'
113[ 0.949277] DMI not present or invalid.
114[ 0.961380] NET: Registered protocol family 16
115[ 0.966781] DMA: preallocated 256 KiB pool for atomic allocations
116[ 0.968898] audit: initializing netlink subsys (disabled)
117[ 0.976475] audit: type=2000 audit(0.384:1): state=initialized audit_enabled1
118[ 0.981944] cpuidle: using governor menu
119[ 0.988533] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
120[ 0.994769] Serial: AMBA PL011 UART driver
121[ 1.026472] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
122[ 1.026512] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
123[ 1.032266] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
124[ 1.038935] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
125[ 1.073811] cryptd: max_cpu_qlen set to 1000
126[ 1.138983] ACPI: Interpreter disabled.
127[ 1.139749] reg-fixed-voltage v1p05-regulator: Failed to allocate supply name
128[ 1.141634] reg-fixed-voltage: probe of v1p05-regulator failed with error -12
129[ 1.148973] reg-fixed-voltage v12-poe-regulator: Failed to allocate supply ne
130[ 1.156054] reg-fixed-voltage: probe of v12-poe-regulator failed with error 2
131[ 1.164377] iommu: Default domain type: Translated
132[ 1.170727] vgaarb: loaded
133[ 1.175592] SCSI subsystem initialized
134[ 1.178387] libata version 3.00 loaded.
135[ 1.182021] usbcore: registered new interface driver usbfs
136[ 1.185573] usbcore: registered new interface driver hub
137[ 1.191206] usbcore: registered new device driver usb
138[ 1.197136] pps_core: LinuxPPS API ver. 1 registered
139[ 1.201535] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
140[ 1.206577] PTP clock support registered
141[ 1.215783] EDAC MC: Ver: 3.0.0
142[ 1.220505] qcom_scm: convention: smc arm 64
143[ 1.223896] FPGA manager framework
144[ 1.227023] Advanced Linux Sound Architecture Driver Initialized.
145[ 1.238910] s1: supplied by vph_pwr
146[ 1.239149] s2: supplied by vph_pwr
147[ 1.241345] s3: supplied by vph_pwr
148[ 1.244896] vreg_s3a_1p3: Bringing 0uV into 1300000-1300000uV
149[ 1.245611] clocksource: Switched to clocksource arch_sys_counter
150[ 1.248340] s4: supplied by vph_pwr
151[ 1.248375] vreg_s4a_1p8: Bringing 0uV into 1800000-1800000uV
152[ 1.248606] s5: supplied by vph_pwr
153[ 1.248642] vreg_s5a_2p15: Bringing 0uV into 2150000-2150000uV
154[ 1.248864] s6: supplied by vph_pwr
155[ 1.249025] s7: supplied by vph_pwr
156[ 1.249065] vreg_s7a_1p0: Bringing 0uV into 800000-800000uV
157[ 1.249213] s8: supplied by vph_pwr
158[ 1.249389] s9: supplied by vph_pwr
159[ 1.249665] s10: supplied by vph_pwr
160[ 1.264515] VFS: Disk quotas dquot_6.6.0
161[ 1.269593] s11: supplied by vph_pwr
162[ 1.269763] s12: supplied by vph_pwr
163[ 1.269985] l1: supplied by regulator-dummy
164[ 1.275962] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
165[ 1.278600] vreg_l1a_1p0: Bringing 0uV into 1000000-1000000uV
166[ 1.278758] l2: supplied by vreg_s3a_1p3
167[ 1.278790] vreg_l2a_1p25: Bringing 0uV into 1250000-1250000uV
168[ 1.278934] l3: supplied by vreg_s3a_1p3
169[ 1.278968] vreg_l3a_0p875: Bringing 0uV into 850000-850000uV
170[ 1.279164] l4: supplied by vreg_s3a_1p3
171[ 1.292736] pnp: PnP ACPI: disabled
172[ 1.294552] vreg_l4a_1p225: Bringing 0uV into 1225000-1225000uV
173[ 1.356263] l5: supplied by vreg_s5a_2p15
174[ 1.362109] l6: supplied by vreg_s5a_2p15
175[ 1.366080] vreg_l6a_1p2: Bringing 0uV into 1200000-1200000uV
176[ 1.370235] l7: supplied by vreg_s5a_2p15
177[ 1.375978] l8: supplied by vph_pwr
178[ 1.379799] vreg_l8a_1p8: Bringing 0uV into 1800000-1800000uV
179[ 1.383331] l9: supplied by regulator-dummy
180[ 1.389014] vreg_l9a_1p8: Bringing 0uV into 1800000-1800000uV
181[ 1.393184] l10: supplied by regulator-dummy
182[ 1.398893] vreg_l10a_1p8: Bringing 0uV into 1800000-1800000uV
183[ 1.403393] l11: supplied by vreg_s3a_1p3
184[ 1.408888] vreg_l11a_1p15: Bringing 0uV into 1150000-1150000uV
185[ 1.413115] l12: supplied by vreg_s5a_2p15
186[ 1.418686] vreg_l12a_1p8: Bringing 0uV into 1800000-1800000uV
187[ 1.423110] l13: supplied by regulator-dummy
188[ 1.428669] vreg_l13a_2p95: Bringing 0uV into 1800000-1800000uV
189[ 1.433330] l14: supplied by regulator-dummy
190[ 1.438735] vreg_l14a_1p8: Bringing 0uV into 1800000-1800000uV
191[ 1.443462] l15: supplied by regulator-dummy
192[ 1.448912] vreg_l15a_1p8: Bringing 0uV into 1800000-1800000uV
193[ 1.453615] l16: supplied by vph_pwr
194[ 1.458959] vreg_l16a_2p7: Bringing 0uV into 2700000-2700000uV
195[ 1.462930] l17: supplied by regulator-dummy
196[ 1.468342] vreg_l17a_2p8: Bringing 0uV into 2500000-2500000uV
197[ 1.472996] l18: supplied by regulator-dummy
198[ 1.478406] vreg_l18a_2p85: Bringing 0uV into 2700000-2700000uV
199[ 1.483121] l19: supplied by regulator-dummy
200[ 1.488476] vreg_l19a_2p8: Bringing 0uV into 3000000-3000000uV
201[ 1.493263] l20: supplied by regulator-dummy
202[ 1.498640] vreg_l20a_2p95: Bringing 0uV into 2950000-2950000uV
203[ 1.503301] l21: supplied by regulator-dummy
204[ 1.508704] vreg_l21a_2p95: Bringing 0uV into 2950000-2950000uV
205[ 1.513433] l22: supplied by regulator-dummy
206[ 1.518864] vreg_l22a_3p0: Bringing 0uV into 3300000-3300000uV
207[ 1.523650] l23: supplied by regulator-dummy
208[ 1.529041] vreg_l23a_2p8: Bringing 0uV into 2800000-2800000uV
209[ 1.533773] l24: supplied by regulator-dummy
210[ 1.539088] vreg_l24a_3p075: Bringing 0uV into 3075000-3075000uV
211[ 1.543703] l25: supplied by vreg_s3a_1p3
212[ 1.549514] vreg_l25a_1p2: Bringing 0uV into 1200000-1200000uV
213[ 1.553588] l26: supplied by vreg_s3a_1p3
214[ 1.559420] l27: supplied by vreg_s3a_1p3
215[ 1.563215] vreg_l26a_0p8: Bringing 0uV into 1000000-1000000uV
216[ 1.567406] l28: supplied by vreg_s3a_1p3
217[ 1.572958] vreg_l28a_0p925: Bringing 0uV into 925000-925000uV
218[ 1.577268] l29: supplied by regulator-dummy
219[ 1.582764] vreg_l29a_2p8: Bringing 0uV into 2800000-2800000uV
220[ 1.587434] l30: supplied by vph_pwr
221[ 1.592840] vreg_l30a_1p8: Bringing 0uV into 1800000-1800000uV
222[ 1.596778] l31: supplied by vreg_s3a_1p3
223[ 1.602424] l32: supplied by vreg_s5a_2p15
224[ 1.606285] vreg_l32a_1p8: Bringing 0uV into 1800000-1800000uV
225[ 1.610472] lvs1: supplied by vreg_s4a_1p8
226[ 1.616379] lvs2: supplied by vreg_s4a_1p8
227[ 1.661951] NET: Registered protocol family 2
228[ 1.679746] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 327)
229[ 1.682513] TCP established hash table entries: 32768 (order: 6, 262144 byte)
230[ 1.695516] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, line)
231[ 1.706350] TCP: Hash tables configured (established 32768 bind 32768)
232[ 1.710654] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
233[ 1.714688] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
234[ 1.727516] NET: Registered protocol family 1
235[ 1.746309] RPC: Registered named UNIX socket transport module.
236[ 1.747320] RPC: Registered udp transport module.
237[ 1.752524] RPC: Registered tcp transport module.
238[ 1.757646] RPC: Registered tcp NFSv4.1 backchannel transport module.
239[ 1.762291] PCI: CLS 0 bytes, default 64
240[ 1.776438] Unpacking initramfs...
241[ 15.152560] Freeing initrd memory: 5568K
242[ 15.172781] kvm [1]: HYP mode not available
243[ 16.352394] Initialise system trusted keyrings
244[ 16.359500] workingset: timestamp_bits=44 max_order=20 bucket_order=0
245[ 16.790896] squashfs: version 4.0 (2009/01/31) Phillip Lougher
246[ 16.832494] NFS: Registering the id_resolver key type
247[ 16.834455] Key type id_resolver registered
248[ 16.837960] Key type id_legacy registered
249[ 16.842207] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
250[ 16.852297] 9p: Installing v9fs 9p2000 file system support
251[ 18.376042] Key type asymmetric registered
252[ 18.377668] Asymmetric key parser 'x509' registered
253[ 18.381735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
254[ 18.385460] io scheduler mq-deadline registered
255[ 18.392873] io scheduler kyber registered
256[ 18.646155] ufs_qcom_phy_qmp_14nm 627000.phy: invalid resource
257[ 18.663554] ufs_qcom_phy_qmp_14nm 627000.phy: 627000.phy supply vddp-ref-clkr
258[ 18.998734] EINJ: ACPI disabled.
259[ 20.395812] bam-dma-engine 9184000.dma: WARN: Device release is not defined e
260[ 20.944617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
261[ 21.059167] SuperH (H)SCI(F) driver initialized
262[ 21.092818] msm_serial 75b0000.serial: msm_serial: detected port #0
263[ 21.095279] msm_serial 75b0000.serial: uartclk = 7372800
264[ 21.101997] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 53, base_baud =M
265[ 21.106291] msm_serial: console setup on port #0
266[ 21.115581] printk: console [ttyMSM0] enabled
267[ 21.120324] printk: bootconsole [msm_serial_dm0] disabled
268[ 21.148208] msm_serial: driver initialized
269[ 21.212037] arm-smmu b40000.iommu: probing hardware configuration...
270[ 21.213837] arm-smmu b40000.iommu: SMMUv2 with:
271[ 21.219366] arm-smmu b40000.iommu: stage 1 translation
272[ 21.223258] arm-smmu b40000.iommu: address translation ops
273[ 21.228452] arm-smmu b40000.iommu: non-coherent table walk
274[ 21.233999] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configurati)
275[ 21.239813] arm-smmu b40000.iommu: stream matching with 2 register groups
276[ 21.247336] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only)
277[ 21.254247] arm-smmu b40000.iommu: Supported page sizes: 0x63315000
278[ 21.260357] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
279[ 21.292797] arm-smmu d00000.iommu: probing hardware configuration...
280[ 21.294640] arm-smmu d00000.iommu: SMMUv2 with:
281[ 21.300770] arm-smmu d00000.iommu: stage 1 translation
282[ 21.304152] arm-smmu d00000.iommu: address translation ops
283[ 21.309920] arm-smmu d00000.iommu: non-coherent table walk
284[ 21.315448] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configurati)
285[ 21.322362] arm-smmu d00000.iommu: stream matching with 2 register groups
286[ 21.328825] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only)
287[ 21.335564] arm-smmu d00000.iommu: Supported page sizes: 0x63315000
288[ 21.341823] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
289[ 21.372202] arm-smmu d40000.iommu: probing hardware configuration...
290[ 21.373951] arm-smmu d40000.iommu: SMMUv2 with:
291[ 21.379472] arm-smmu d40000.iommu: stage 1 translation
292[ 21.383430] arm-smmu d40000.iommu: address translation ops
293[ 21.388633] arm-smmu d40000.iommu: non-coherent table walk
294[ 21.394184] arm-smmu d40000.iommu: (IDR0.CTTW overridden by FW configurati)
295[ 21.400199] arm-smmu d40000.iommu: stream matching with 42 register groups
296[ 21.408909] arm-smmu d40000.iommu: 7 context banks (0 stage-2 only)
297[ 21.414269] arm-smmu d40000.iommu: Supported page sizes: 0x63315000
298[ 21.420606] arm-smmu d40000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
299[ 21.497948] arm-smmu da0000.iommu: probing hardware configuration...
300[ 21.498979] arm-smmu da0000.iommu: SMMUv2 with:
301[ 21.505715] arm-smmu da0000.iommu: stage 1 translation
302[ 21.508498] arm-smmu da0000.iommu: address translation ops
303[ 21.514334] arm-smmu da0000.iommu: non-coherent table walk
304[ 21.519885] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configurati)
305[ 21.525702] arm-smmu da0000.iommu: stream matching with 4 register groups
306[ 21.533741] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only)
307[ 21.539969] arm-smmu da0000.iommu: Supported page sizes: 0x63315000
308[ 21.546279] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
309[ 21.580656] arm-smmu 1600000.iommu: probing hardware configuration...
310[ 21.582376] arm-smmu 1600000.iommu: SMMUv2 with:
311[ 21.587770] arm-smmu 1600000.iommu: stage 1 translation
312[ 21.592295] arm-smmu 1600000.iommu: address translation ops
313[ 21.597604] arm-smmu 1600000.iommu: non-coherent table walk
314[ 21.603220] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configurati)
315[ 21.610509] arm-smmu 1600000.iommu: stream matching with 15 register groups
316[ 21.616407] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only)
317[ 21.623597] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000
318[ 21.629661] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
319[ 21.728964] loop: module loaded
320[ 21.736481] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vd
321[ 21.737534] ufshcd-qcom 624000.ufshc: Failed to get reset control -2
322[ 21.751689] scsi host0: ufshcd
323[ 21.752910] ufshcd-qcom 624000.ufshc: ufs_qcom_host_reset: reset control nott
324[ 21.763305] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
325[ 21.781835] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[0
326[ 21.883310] s1: supplied by regulator-dummy
327[ 21.900288] s2: supplied by regulator-dummy
328[ 21.917696] s3: supplied by regulator-dummy
329[ 21.933853] s4: supplied by regulator-dummy
330[ 21.950061] s5: supplied by regulator-dummy
331[ 21.968406] s7: supplied by regulator-dummy
332[ 21.978578] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[2
333[ 21.985815] s8: supplied by regulator-dummy
334[ 21.991042] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral N
335[ 21.993592] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 076
336[ 22.006569] s11: supplied by regulator-dummy
337[ 22.026182] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral N
338[ 22.026252] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 076
339[ 22.031138] s12: supplied by regulator-dummy
340[ 22.038896] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral N
341[ 22.049062] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 076
342[ 22.062117] l1: supplied by regulator-dummy
343[ 22.063107] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 P6
344[ 22.073027] sd 0:0:0:0: Power-on or device reset occurred
345[ 22.080828] random: fast init done
346[ 22.085527] l2: supplied by regulator-dummy
347[ 22.086365] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 P6
348[ 22.093496] sd 0:0:0:0: [sda] 14530560 4096-byte logical blocks: (59.5 GB/55)
349[ 22.097962] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 P6
350[ 22.101696] sd 0:0:0:0: [sda] 16384-byte physical blocks
351[ 22.107581] l3: supplied by regulator-dummy
352[ 22.109951] sd 0:0:0:2: Power-on or device reset occurred
353[ 22.110457] sd 0:0:0:1: Power-on or device reset occurred
354[ 22.132298] sd 0:0:0:0: [sda] Write Protect is off
355[ 22.133517] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 P6
356[ 22.137615] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
357[ 22.143092] scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 P6
358[ 22.147515] l4: supplied by regulator-dummy
359[ 22.156899] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 M)
360[ 22.163627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supA
361[ 22.163812] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multipl)
362[ 22.164071] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 M)
363[ 22.164077] sd 0:0:0:2: [sdc] 16384-byte physical blocks
364[ 22.164205] sd 0:0:0:3: Power-on or device reset occurred
365[ 22.164788] l6: supplied by regulator-dummy
366[ 22.169582] sd 0:0:0:1: [sdb] 16384-byte physical blocks
367[ 22.174936] sd 0:0:0:2: [sdc] Write Protect is off
368[ 22.174944] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
369[ 22.175200] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supA
370[ 22.175339] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes not a multipl)
371[ 22.175721] scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 P6
372[ 22.182730] l7: supplied by regulator-dummy
373[ 22.193770] sd 0:0:0:4: Power-on or device reset occurred
374[ 22.195119] sd 0:0:0:1: [sdb] Write Protect is off
375[ 22.199867] l8: supplied by regulator-dummy
376[ 22.201720] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 Mi)
377[ 22.207022] sd 0:0:0:5: Power-on or device reset occurred
378[ 22.207689] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
379[ 22.211874] sd 0:0:0:3: [sdd] 16384-byte physical blocks
380[ 22.212044] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.0)
381[ 22.212049] sd 0:0:0:4: [sde] 16384-byte physical blocks
382[ 22.212172] sd 0:0:0:3: [sdd] Write Protect is off
383[ 22.212180] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
384[ 22.212582] sd 0:0:0:4: [sde] Write Protect is off
385[ 22.213031] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 M)
386[ 22.213037] sd 0:0:0:5: [sdf] 16384-byte physical blocks
387[ 22.213147] sd 0:0:0:5: [sdf] Write Protect is off
388[ 22.213152] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
389[ 22.213242] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supA
390[ 22.213338] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supA
391[ 22.213425] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes not a multipl)
392[ 22.216609] l9: supplied by regulator-dummy
393[ 22.216692] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes not a multipl)
394[ 22.221354] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
395[ 22.226490] sda: sda1
396[ 22.227695] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supA
397[ 22.233609] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes not a multipl)
398[ 22.234888] l10: supplied by regulator-dummy
399[ 22.240423] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supA
400[ 22.252635] l11: supplied by regulator-dummy
401[ 22.258503] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes not a multipl)
402[ 22.259147] sdc: sdc1
403[ 22.259936] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
404[ 22.261530] sd 0:0:0:0: [sda] Attached SCSI disk
405[ 22.262259] sdd: sdd1 sdd2 sdd3
406[ 22.279249] sd 0:0:0:5: [sdf] Attached SCSI disk
407[ 22.284200] l12: supplied by regulator-dummy
408[ 22.290097] sd 0:0:0:2: [sdc] Attached SCSI disk
409[ 22.294386] sd 0:0:0:3: [sdd] Attached SCSI disk
410[ 22.313867] l13: supplied by regulator-dummy
411[ 22.322475] sdb: sdb1
412[ 22.324906] sd 0:0:0:1: [sdb] Attached SCSI disk
413[ 22.347129] l14: supplied by regulator-dummy
414[ 22.367760] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 s0
415[ 22.395724] l15: supplied by regulator-dummy
416[ 22.401187] sd 0:0:0:4: [sde] Attached SCSI disk
417[ 22.426636] l16: supplied by regulator-dummy
418[ 22.539832] l17: supplied by regulator-dummy
419[ 22.559228] l18: supplied by regulator-dummy
420[ 22.578069] l19: supplied by regulator-dummy
421[ 22.596853] l20: supplied by regulator-dummy
422[ 22.616275] l21: supplied by regulator-dummy
423[ 22.635945] l22: supplied by regulator-dummy
424[ 22.655841] l23: supplied by regulator-dummy
425[ 22.675606] l24: supplied by regulator-dummy
426[ 22.695225] l25: supplied by regulator-dummy
427[ 22.715427] l26: supplied by regulator-dummy
428[ 22.734995] l27: supplied by regulator-dummy
429[ 22.755070] l28: supplied by regulator-dummy
430[ 22.775411] l29: supplied by regulator-dummy
431[ 22.795631] l30: supplied by regulator-dummy
432[ 22.815570] l31: supplied by regulator-dummy
433[ 22.836147] l32: supplied by regulator-dummy
434[ 22.856207] lvs1: supplied by regulator-dummy
435[ 22.876230] lvs2: supplied by regulator-dummy
436[ 22.938528] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): detected .
437[ 23.018726] libphy: Fixed MDIO Bus: probed
438[ 23.034372] tun: Universal TUN/TAP device driver, 1.6
439[ 23.071780] thunder_xcv, ver 1.0
440[ 23.074885] thunder_bgx, ver 1.0
441[ 23.077946] nicpf, ver 1.0
442[ 23.111791] hclge is initializing
443[ 23.121651] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - versin
444[ 23.122770] hns3: Copyright (c) 2017 Huawei Corporation.
445[ 23.132197] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
446[ 23.134767] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
447[ 23.142634] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
448[ 23.146280] igb: Copyright (c) 2007-2014 Intel Corporation.
449[ 23.156149] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
450[ 23.159082] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
451[ 23.185936] sky2: driver version 1.30
452[ 23.225784] VFIO - User Level meta-driver version: 0.3
453[ 23.313969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
454[ 23.314951] ehci-pci: EHCI PCI platform driver
455[ 23.322585] ehci-platform: EHCI generic platform driver
456[ 23.331415] ehci-orion: EHCI orion driver
457[ 23.338158] ehci-exynos: EHCI Exynos driver
458[ 23.343949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
459[ 23.345914] ohci-pci: OHCI PCI platform driver
460[ 23.351963] ohci-platform: OHCI generic platform driver
461[ 23.361565] ohci-exynos: OHCI Exynos driver
462[ 23.388812] usbcore: registered new interface driver usb-storage
463[ 23.543342] i2c /dev entries driver
464[ 23.726298] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/0
465[ 24.108274] qcom-cpufreq-nvmem: probe of qcom-cpufreq-nvmem failed with erro2
466[ 24.158923] sdhci: Secure Digital Host Controller Interface driver
467[ 24.159860] sdhci: Copyright(c) Pierre Ossman
468[ 24.189619] Synopsys Designware Multimedia Card Interface Driver
469[ 24.247568] sdhci-pltfm: SDHCI platform and OF driver helper
470[ 24.315825] sdhci_msm 74a4900.sdhci: Got CD GPIO
471[ 24.448972] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADt
472[ 24.454060] ledtrig-cpu: registered to indicate activity on CPUs
473[ 24.516366] usbcore: registered new interface driver usbhid
474[ 24.519193] usbhid: USB HID core driver
475[ 24.792247] NET: Registered protocol family 17
476[ 24.800759] 9pnet: Installing 9P2000 support
477[ 24.803930] Key type dns_resolver registered
478[ 24.824852] registered taskstats version 1
479[ 24.826790] Loading compiled-in X.509 certificates
480[ 26.831392] hctosys: unable to open rtc device (rtc0)
481[ 26.862756] ALSA device list:
482[ 26.863871] No soundcards found.
483[ 26.953729] Freeing unused kernel memory: 5376K
484[ 26.964908] Run /init as init process
485[ 26.966344] with arguments:
486[ 26.969427] /init
487[ 26.971771] with environment:
488[ 26.974683] HOME=/
489[ 26.977582] TERM=linux
490[ 62.117672] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
491[ 62.117711] EXT4-fs (sda1): write access will be enabled during recovery
492[ 62.242503] EXT4-fs (sda1): recovery complete
493[ 62.243561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:)
494[ 63.123521] systemd[1]: System time before build time, advancing clock.
495[ 63.180750] NET: Registered protocol family 10
496[ 63.187939] Segment Routing with IPv6
497[ 64.571955] random: systemd: uninitialized urandom read (16 bytes read)
498[ 64.576078] random: systemd: uninitialized urandom read (16 bytes read)
499[ 64.578373] random: systemd: uninitialized urandom read (16 bytes read)
500[ 65.770191] EXT4-fs (sda1): re-mounted. Opts: data=ordered
501[ 65.892154] systemd-journald[294]: Received request to flush runtime journal1
502[ 66.735498] NET: Registered protocol family 42
503[ 69.336462] Error: Driver 'ufshcd-qcom' is already registered, aborting...
504[ 69.500342] Error: Driver 'qcom_rng' is already registered, aborting...
505[ 70.207230] adreno b00000.gpu: Adding to iommu group 0
506[ 70.313742] qcom_q6v5_pas 9300000.remoteproc: 9300000.remoteproc supply cx nr
507[ 70.314017] qcom_q6v5_pas 9300000.remoteproc: 9300000.remoteproc supply px nr
508[ 70.350445] msm_mdp 901000.mdp: Adding to iommu group 1
509[ 70.350647] msm_mdp 901000.mdp: No interconnect support may cause display un!
510[ 70.388848] remoteproc remoteproc0: 9300000.remoteproc is available
511[ 70.389837] remoteproc remoteproc0: powering up 9300000.remoteproc
512[ 70.394000] remoteproc remoteproc0: Booting fw image adsp.mdt, size 7196
513[ 70.454681] msm_hdmi_phy 9a0600.hdmi-phy: 9a0600.hdmi-phy supply vddio not fr
514[ 70.454902] msm_hdmi_phy 9a0600.hdmi-phy: 9a0600.hdmi-phy supply vcca not for
515[ 70.465444] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy rr
516[ 70.475201] msm_mdp 901000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.7
517[ 70.481838] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
518[ 70.502455] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
519[ 70.504397] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy r
520[ 70.525277] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummr
521[ 70.525637] msm 900000.mdss: [drm:msm_gpu_init [msm]] A530: using IOMMU
522[ 70.534620] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
523[ 70.653309] remoteproc remoteproc0: remote processor 9300000.remoteproc is np
524[ 70.733995] msm_mdp 901000.mdp: [drm:mdp5_kms_init [msm]] *ERROR* modeset_in6
525[ 70.734676] msm 900000.mdss: [drm:msm_drm_bind [msm]] *ERROR* failed to loads
526[ 70.988912] ------------[ cut here ]------------
527[ 70.989060] WARNING: CPU: 1 PID: 391 at drivers/gpu/drm/drm_gem.c:1037 drm_g]
528[ 70.992613] Modules linked in: crct10dif_ce qcom_q6v5_pas qcom_sysmon qcom_q6
529[ 71.003336] CPU: 1 PID: 391 Comm: systemd-udevd Not tainted 5.5.0-rc6-ifc6643
530[ 71.025512] Hardware name: Inforce 6640 Single Board Computer (DT)
531[ 71.033843] pstate: 40000005 (nZcv daif -PAN -UAO)
532[ 71.040093] pc : drm_gem_object_put+0x90/0xb8 [drm]
533[ 71.044843] lr : drm_gem_object_put+0x20/0xb8 [drm]
534[ 71.049539] sp : ffff80001225b640
535[ 71.054399] x29: ffff80001225b640 x28: ffff0000f5f8b800
536[ 71.057874] x27: ffff0000ee057000 x26: ffff0000ee057000
537[ 71.063254] x25: ffff0000f5f64680 x24: 0000000000000000
538[ 71.068549] x23: ffff0000eecd54a0 x22: 0000000000000002
539[ 71.073846] x21: 0000000000000001 x20: ffff0000f7830800
540[ 71.079159] x19: ffff0000f7831200 x18: 000000000000001e
541[ 71.084436] x17: 0000000000000000 x16: 0000000000000000
542[ 71.089731] x15: ffff0000ee0561f8 x14: ffff0000f055b7d8
543[ 71.095032] x13: 0000000000000000 x12: 0000000000000000
544[ 71.100321] x11: ffff0000f055b6c0 x10: 0000000000000000
545[ 71.105616] x9 : 0000000000000040 x8 : 0000000000000000
546[ 71.110923] x7 : 0000000000000000 x6 : 000000005560ff54
547[ 71.116206] x5 : 00ffffffffffffff x4 : ffff0000f784e200
548[ 71.121501] x3 : ffff0000f78313a8 x2 : 0000000000000000
549[ 71.126796] x1 : 0000000000000000 x0 : 0000000000000000
550[ 71.132104] Call trace:
551[ 71.137482] drm_gem_object_put+0x90/0xb8 [drm]
552[ 71.139623] msm_gem_kernel_put+0x60/0x78 [msm]
553[ 71.144139] a5xx_preempt_fini+0x3c/0x60 [msm]
554[ 71.148642] a5xx_destroy+0x2c/0x90 [msm]
555[ 71.153168] adreno_unbind+0x28/0x40 [msm]
556[ 71.157186] component_unbind.isra.11+0x2c/0x50
557[ 71.161175] component_unbind_all+0xd0/0xe0
558[ 71.165668] msm_drm_uninit+0x104/0x198 [msm]
559[ 71.169848] msm_drm_bind+0x1cc/0x5f0 [msm]
560[ 71.174286] try_to_bring_up_master+0x15c/0x1c0
561[ 71.178276] component_master_add_with_match+0xc0/0x108
562[ 71.182855] msm_pdev_probe+0x244/0x2f0 [msm]
563[ 71.188022] platform_drv_probe+0x50/0xa8
564[ 71.192520] really_probe+0x108/0x370
565[ 71.196521] driver_probe_device+0x58/0x100
566[ 71.200148] device_driver_attach+0x6c/0x78
567[ 71.204143] __driver_attach+0xb0/0xf0
568[ 71.208306] bus_for_each_dev+0x68/0xc8
569[ 71.212126] driver_attach+0x20/0x28
570[ 71.215860] bus_add_driver+0x160/0x1f0
571[ 71.219691] driver_register+0x60/0x110
572[ 71.223245] __platform_driver_register+0x40/0x48
573[ 71.227131] msm_drm_register+0x58/0x64 [msm]
574[ 71.231919] do_one_initcall+0x58/0x1a0
575[ 71.236260] do_init_module+0x54/0x1d4
576[ 71.239904] load_module+0x1b3c/0x21b8
577[ 71.243724] __do_sys_finit_module+0xe8/0x100
578[ 71.247458] __arm64_sys_finit_module+0x18/0x20
579[ 71.251902] el0_svc_common.constprop.3+0xb0/0x168
580[ 71.256242] do_el0_svc+0x20/0x80
581[ 71.261098] el0_sync_handler+0xf4/0x1b0
582[ 71.264469] el0_sync+0x140/0x180
583[ 71.268473] ---[ end trace 35e7a3ffd78ca919 ]---
584[ 71.696854] random: crng init done
585[ 71.696888] random: 7 urandom warning(s) missed due to ratelimiting
586[ 71.708174] ------------[ cut here ]------------
587[ 71.708316] WARNING: CPU: 0 PID: 391 at drivers/gpu/drm/drm_gem.c:1037 drm_g]
588[ 71.712021] Modules linked in: crct10dif_ce qcom_q6v5_pas qcom_sysmon qcom_q6
589[ 71.722567] CPU: 0 PID: 391 Comm: systemd-udevd Tainted: G W 3
590[ 71.744778] Hardware name: Inforce 6640 Single Board Computer (DT)
591[ 71.754518] pstate: 40000005 (nZcv daif -PAN -UAO)
592[ 71.760747] pc : drm_gem_object_put+0x90/0xb8 [drm]
593[ 71.765497] lr : drm_gem_object_put+0x20/0xb8 [drm]
594[ 71.770190] sp : ffff80001225b640
595[ 71.775069] x29: ffff80001225b640 x28: ffff0000f5f8b800
596[ 71.778525] x27: ffff0000ee057000 x26: ffff0000ee057000
597[ 71.783909] x25: ffff0000f5f64680 x24: 0000000000000000
598[ 71.789201] x23: ffff0000eecd54a0 x22: 0000000000000002
599[ 71.794496] x21: 0000000000000001 x20: ffff0000f7830800
600[ 71.799792] x19: ffff0000f6ee7000 x18: 000000000000001e
601[ 71.805087] x17: 0000000000000000 x16: 0000000000000000
602[ 71.810381] x15: 000000b6e6f851ec x14: 0000000000000000
603[ 71.815677] x13: 0000000000000000 x12: 0000000000000001
604[ 71.820971] x11: 0000000000000000 x10: 0000000002eaae17
605[ 71.826284] x9 : ffff8000ec73b000 x8 : ffff0000fdc28f00
606[ 71.831562] x7 : ffff0000fdc28f38 x6 : 0000000000000003
607[ 71.836857] x5 : ffff0000f5f83800 x4 : ffff0000f784e200
608[ 71.842152] x3 : ffff0000f6ee71a8 x2 : 0000000000000000
609[ 71.847448] x1 : 0000000000000000 x0 : 0000000000000000
610[ 71.852743] Call trace:
611[ 71.858143] drm_gem_object_put+0x90/0xb8 [drm]
612[ 71.860279] msm_gem_kernel_put+0x60/0x78 [msm]
613[ 71.864776] a5xx_preempt_fini+0x3c/0x60 [msm]
614[ 71.869291] a5xx_destroy+0x2c/0x90 [msm]
615[ 71.873803] adreno_unbind+0x28/0x40 [msm]
616[ 71.877851] component_unbind.isra.11+0x2c/0x50
617[ 71.881826] component_unbind_all+0xd0/0xe0
618[ 71.886320] msm_drm_uninit+0x104/0x198 [msm]
619[ 71.890472] msm_drm_bind+0x1cc/0x5f0 [msm]
620[ 71.894938] try_to_bring_up_master+0x15c/0x1c0
621[ 71.898927] component_master_add_with_match+0xc0/0x108
622[ 71.903504] msm_pdev_probe+0x244/0x2f0 [msm]
623[ 71.908654] platform_drv_probe+0x50/0xa8
624[ 71.913160] really_probe+0x108/0x370
625[ 71.917152] driver_probe_device+0x58/0x100
626[ 71.920798] device_driver_attach+0x6c/0x78
627[ 71.924791] __driver_attach+0xb0/0xf0
628[ 71.928983] bus_for_each_dev+0x68/0xc8
629[ 71.932777] driver_attach+0x20/0x28
630[ 71.936512] bus_add_driver+0x160/0x1f0
631[ 71.940331] driver_register+0x60/0x110
632[ 71.943889] __platform_driver_register+0x40/0x48
633[ 71.947779] msm_drm_register+0x58/0x64 [msm]
634[ 71.952573] do_one_initcall+0x58/0x1a0
635[ 71.956911] do_init_module+0x54/0x1d4
636[ 71.960554] load_module+0x1b3c/0x21b8
637[ 71.964376] __do_sys_finit_module+0xe8/0x100
638[ 71.968107] __arm64_sys_finit_module+0x18/0x20
639[ 71.972539] el0_svc_common.constprop.3+0xb0/0x168
640[ 71.976900] do_el0_svc+0x20/0x80
641[ 71.981738] el0_sync_handler+0xf4/0x1b0
642[ 71.985122] el0_sync+0x140/0x180
643[ 71.989112] ---[ end trace 35e7a3ffd78ca91a ]---
644[ 72.051997] ------------[ cut here ]------------
645[ 72.052146] WARNING: CPU: 0 PID: 391 at drivers/gpu/drm/drm_gem.c:1037 drm_g]
646[ 72.055702] Modules linked in: crct10dif_ce qcom_q6v5_pas qcom_sysmon qcom_q6
647[ 72.066409] CPU: 0 PID: 391 Comm: systemd-udevd Tainted: G W 3
648[ 72.088609] Hardware name: Inforce 6640 Single Board Computer (DT)
649[ 72.098318] pstate: 40000005 (nZcv daif -PAN -UAO)
650[ 72.104576] pc : drm_gem_object_put+0x90/0xb8 [drm]
651[ 72.109347] lr : drm_gem_object_put+0x20/0xb8 [drm]
652[ 72.114025] sp : ffff80001225b640
653[ 72.118872] x29: ffff80001225b640 x28: ffff0000f5f8b800
654[ 72.122346] x27: ffff0000ee057000 x26: ffff0000ee057000
655[ 72.127741] x25: ffff0000f5f64680 x24: 0000000000000000
656[ 72.133033] x23: ffff0000eecd54a0 x22: 0000000000000002
657[ 72.138320] x21: 0000000000000001 x20: ffff0000f7830800
658[ 72.143615] x19: ffff0000f6ee6c00 x18: 000000000000001e
659[ 72.148936] x17: 0000000000000000 x16: 0000000000000000
660[ 72.148942] x15: 000000b6e6f851ec x14: 0000000000000000
661[ 72.148947] x13: 0000000000000000 x12: 0000000000000001
662[ 72.148951] x11: 0000000000000000 x10: 0000000002eaae17
663[ 72.148956] x9 : 0000000000000040 x8 : ffff8000118ef5f8
664[ 72.148960] x7 : ffff0000f8800068 x6 : 0000000000000000
665[ 72.148965] x5 : ffff0000f8c0c000 x4 : ffff0000f784e200
666[ 72.148969] x3 : ffff0000f6ee6da8 x2 : 0000000000000000
667[ 72.148973] x1 : 0000000000000000 x0 : 0000000000000000
668[ 72.148979] Call trace:
669[ 72.149080] drm_gem_object_put+0x90/0xb8 [drm]
670[ 72.149151] msm_gem_kernel_put+0x60/0x78 [msm]
671[ 72.149200] a5xx_preempt_fini+0x3c/0x60 [msm]
672[ 72.149248] a5xx_destroy+0x2c/0x90 [msm]
673[ 72.149295] adreno_unbind+0x28/0x40 [msm]
674[ 72.149308] component_unbind.isra.11+0x2c/0x50
675[ 72.149313] component_unbind_all+0xd0/0xe0
676[ 72.149362] msm_drm_uninit+0x104/0x198 [msm]
677[ 72.149411] msm_drm_bind+0x1cc/0x5f0 [msm]
678[ 72.149418] try_to_bring_up_master+0x15c/0x1c0
679[ 72.149423] component_master_add_with_match+0xc0/0x108
680[ 72.149470] msm_pdev_probe+0x244/0x2f0 [msm]
681[ 72.149477] platform_drv_probe+0x50/0xa8
682[ 72.149482] really_probe+0x108/0x370
683[ 72.149486] driver_probe_device+0x58/0x100
684[ 72.149490] device_driver_attach+0x6c/0x78
685[ 72.149494] __driver_attach+0xb0/0xf0
686[ 72.149498] bus_for_each_dev+0x68/0xc8
687[ 72.149501] driver_attach+0x20/0x28
688[ 72.149505] bus_add_driver+0x160/0x1f0
689[ 72.149509] driver_register+0x60/0x110
690[ 72.149514] __platform_driver_register+0x40/0x48
691[ 72.149561] msm_drm_register+0x58/0x64 [msm]
692[ 72.149566] do_one_initcall+0x58/0x1a0
693[ 72.149573] do_init_module+0x54/0x1d4
694[ 72.149576] load_module+0x1b3c/0x21b8
695[ 72.149580] __do_sys_finit_module+0xe8/0x100
696[ 72.149583] __arm64_sys_finit_module+0x18/0x20
697[ 72.149591] el0_svc_common.constprop.3+0xb0/0x168
698[ 72.149595] do_el0_svc+0x20/0x80
699[ 72.149600] el0_sync_handler+0xf4/0x1b0
700[ 72.149603] el0_sync+0x140/0x180
701[ 72.149608] ---[ end trace 35e7a3ffd78ca91b ]---
702[ 72.159845] ------------[ cut here ]------------
703[ 72.159960] WARNING: CPU: 0 PID: 391 at drivers/gpu/drm/drm_gem.c:1037 drm_g]
704[ 72.159963] Modules linked in: crct10dif_ce qcom_q6v5_pas qcom_sysmon qcom_q6
705[ 72.159999] CPU: 0 PID: 391 Comm: systemd-udevd Tainted: G W 3
706[ 72.160002] Hardware name: Inforce 6640 Single Board Computer (DT)
707[ 72.160006] pstate: 40000005 (nZcv daif -PAN -UAO)
708[ 72.160051] pc : drm_gem_object_put+0x90/0xb8 [drm]
709[ 72.160094] lr : drm_gem_object_put+0x20/0xb8 [drm]
710[ 72.160097] sp : ffff80001225b640
711[ 72.160100] x29: ffff80001225b640 x28: ffff0000f5f8b800
712[ 72.160105] x27: ffff0000ee057000 x26: ffff0000ee057000
713[ 72.160110] x25: ffff0000f5f64680 x24: 0000000000000000
714[ 72.160115] x23: ffff0000eecd54a0 x22: 0000000000000002
715[ 72.160119] x21: 0000000000000001 x20: ffff0000f7830800
716[ 72.160124] x19: ffff0000f6ee6800 x18: 000000000000001e
717[ 72.160128] x17: 0000000000000000 x16: 0000000000000000
718[ 72.160133] x15: 000000b6e6f851ec x14: 0000000000000000
719[ 72.160137] x13: 0000000000000000 x12: 0000000000000001
720[ 72.160142] x11: 0000000000000000 x10: 0000000000ecb4f7
721[ 72.160146] x9 : ffff8000ec73b000 x8 : ffff0000fdc28f00
722[ 72.160151] x7 : ffff0000fdc28f38 x6 : 0000000000000003
723[ 72.160155] x5 : ffff0000f784d400 x4 : ffff0000f784e200
724[ 72.160159] x3 : ffff0000f6ee69a8 x2 : 0000000000000000
725[ 72.160164] x1 : 0000000000000000 x0 : 0000000000000000
726[ 72.160169] Call trace:
727[ 72.160213] drm_gem_object_put+0x90/0xb8 [drm]
728[ 72.160282] msm_gem_kernel_put+0x60/0x78 [msm]
729[ 72.160329] a5xx_preempt_fini+0x3c/0x60 [msm]
730[ 72.160376] a5xx_destroy+0x2c/0x90 [msm]
731[ 72.160423] adreno_unbind+0x28/0x40 [msm]
732[ 72.160435] component_unbind.isra.11+0x2c/0x50
733[ 72.160439] component_unbind_all+0xd0/0xe0
734[ 72.160487] msm_drm_uninit+0x104/0x198 [msm]
735[ 72.160534] msm_drm_bind+0x1cc/0x5f0 [msm]
736[ 72.160539] try_to_bring_up_master+0x15c/0x1c0
737[ 72.160544] component_master_add_with_match+0xc0/0x108
738[ 72.160591] msm_pdev_probe+0x244/0x2f0 [msm]
739[ 72.160598] platform_drv_probe+0x50/0xa8
740[ 72.160603] really_probe+0x108/0x370
741[ 72.160607] driver_probe_device+0x58/0x100
742[ 72.160611] device_driver_attach+0x6c/0x78
743[ 72.160615] __driver_attach+0xb0/0xf0
744[ 72.160619] bus_for_each_dev+0x68/0xc8
745[ 72.160623] driver_attach+0x20/0x28
746[ 72.160626] bus_add_driver+0x160/0x1f0
747[ 72.160630] driver_register+0x60/0x110
748[ 72.160635] __platform_driver_register+0x40/0x48
749[ 72.160682] msm_drm_register+0x58/0x64 [msm]
750[ 72.160689] do_one_initcall+0x58/0x1a0
751[ 72.160695] do_init_module+0x54/0x1d4
752[ 72.160699] load_module+0x1b3c/0x21b8
753[ 72.160702] __do_sys_finit_module+0xe8/0x100
754[ 72.160706] __arm64_sys_finit_module+0x18/0x20
755[ 72.160713] el0_svc_common.constprop.3+0xb0/0x168
756[ 72.160717] do_el0_svc+0x20/0x80
757[ 72.160722] el0_sync_handler+0xf4/0x1b0
758[ 72.160725] el0_sync+0x140/0x180
759[ 72.160729] ---[ end trace 35e7a3ffd78ca91c ]---
760[ 72.191579] msm 900000.mdss: master bind failed: -16
761[ 72.638064] platform 901000.mdp: Removing from iommu group 1
762[ 72.642141] Unable to handle kernel paging request at virtual address 0000008
763[ 72.647596] Mem abort info:
764[ 72.655722] ESR = 0x96000004
765[ 72.658282] EC = 0x25: DABT (current EL), IL = 32 bits
766[ 72.661361] SET = 0, FnV = 0
767[ 72.666746] EA = 0, S1PTW = 0
768[ 72.669547] Data abort info:
769[ 72.672259] ISV = 0, ISS = 0x00000004
770[ 72.675843] CM = 0, WnR = 0
771[ 72.679302] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001783a7000
772[ 72.682411] [000000000003b748] pgd=0000000000000000
773[ 72.688887] Internal error: Oops: 96000004 [#1] PREEMPT SMP
774[ 72.693188] Modules linked in: rfkill crct10dif_ce qcom_q6v5_pas qcom_sysmon6
775[ 72.700855] CPU: 0 PID: 391 Comm: systemd-udevd Tainted: G W 3
776[ 72.723063] Hardware name: Inforce 6640 Single Board Computer (DT)
777[ 72.732683] pstate: a0000005 (NzCv daif -PAN -UAO)
778[ 72.738851] pc : kfree+0x40/0x270
779[ 72.743623] lr : platform_device_release+0x20/0x50
780[ 72.747002] sp : ffff80001225b790
781[ 72.751685] x29: ffff80001225b790 x28: ffff0000f5f8b800
782[ 72.755073] x27: ffff0000f8fd6010 x26: ffff800008e96320
783[ 72.760456] x25: ffff0000f82e9010 x24: ffff8000107181e8
784[ 72.765751] x23: 0000000000000001 x22: 000000000003b740
785[ 72.771042] x21: ffff0000eed55280 x20: ffff0000eef95f00
786[ 72.776339] x19: ffff800008edd688 x18: 0000000000000002
787[ 72.781634] x17: 0000000000000000 x16: 0000000000000000
788[ 72.786932] x15: ffff0000f8c20e90 x14: ffff0000f05584c8
789[ 72.792228] x13: 0000000000000000 x12: 0000000000000228
790[ 72.797521] x11: ffff0000f0558490 x10: 0000000000000000
791[ 72.802817] x9 : 0000000000000040 x8 : 0000000040040000
792[ 72.808111] x7 : 0000000000000000 x6 : 0000000080200018
793[ 72.813407] x5 : ffff0000fdc7e200 x4 : 0000000000000000
794[ 72.818702] x3 : 0000000000000004 x2 : 0000000000000001
795[ 72.823997] x1 : 0000000000000005 x0 : fffffdffffe00000
796[ 72.829294] Call trace:
797[ 72.834592] kfree+0x40/0x270
798[ 72.836761] platform_device_release+0x20/0x50
799[ 72.839888] device_release+0x28/0x88
800[ 72.844228] kobject_put+0x74/0x128
801[ 72.847973] klist_children_put+0x14/0x28
802[ 72.851270] klist_next+0xa8/0x140
803[ 72.855429] device_for_each_child+0x60/0xa8
804[ 72.858722] of_platform_depopulate+0x38/0x78
805[ 72.863216] msm_pdev_probe+0x1c0/0x2f0 [msm]
806[ 72.867408] platform_drv_probe+0x50/0xa8
807[ 72.871746] really_probe+0x108/0x370
808[ 72.875739] driver_probe_device+0x58/0x100
809[ 72.879386] device_driver_attach+0x6c/0x78
810[ 72.883372] __driver_attach+0xb0/0xf0
811[ 72.887543] bus_for_each_dev+0x68/0xc8
812[ 72.891359] driver_attach+0x20/0x28
813[ 72.895097] bus_add_driver+0x160/0x1f0
814[ 72.898917] driver_register+0x60/0x110
815[ 72.902475] __platform_driver_register+0x40/0x48
816[ 72.906359] msm_drm_register+0x58/0x64 [msm]
817[ 72.911155] do_one_initcall+0x58/0x1a0
818[ 72.915491] do_init_module+0x54/0x1d4
819[ 72.919140] load_module+0x1b3c/0x21b8
820[ 72.922959] __do_sys_finit_module+0xe8/0x100
821[ 72.926694] __arm64_sys_finit_module+0x18/0x20
822[ 72.931122] el0_svc_common.constprop.3+0xb0/0x168
823[ 72.935459] do_el0_svc+0x20/0x80
824[ 72.940321] el0_sync_handler+0xf4/0x1b0
825[ 72.943707] el0_sync+0x140/0x180
826[ 72.947699] Code: 8b161816 a90363f7 a9046bf9 aa1e03f8 (f94006c0)
827[ 72.950912] ---[ end trace 35e7a3ffd78ca91d ]---
828root@linaro-alip:~#