· 7 years ago · Dec 16, 2018, 05:40 PM
1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.1.0 (dwolfe@otp-mmes-build) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Oct 2 19:21:48 EDT 2012
4[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
6[ 0.000000] Machine: OMAP4 Panda board
7[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
8[ 0.000000] CMA: reserved 32 MiB at 9e000000
9[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
10[ 0.000000] OMAP4460 ES1.1
11[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
12[ 0.000000] On node 0 totalpages: 257792
13[ 0.000000] free_area_init_node: node 0, pgdat c08516c0, node_mem_map c08d2000
14[ 0.000000] DMA zone: 1536 pages used for memmap
15[ 0.000000] DMA zone: 0 pages reserved
16[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
17[ 0.000000] HighMem zone: 512 pages used for memmap
18[ 0.000000] HighMem zone: 60672 pages, LIFO batch:15
19[ 0.000000] PERCPU: Embedded 9 pages/cpu @e0003000 s12512 r8192 d16160 u36864
20[ 0.000000] pcpu-alloc: s12512 r8192 d16160 u36864 alloc=9*4096
21[ 0.000000] pcpu-alloc: [0] 0 [0] 1
22[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255744
23[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
24[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
25[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
26[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
27[ 0.000000] allocated 4194304 bytes of page_cgroup
28[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
29[ 0.000000] Memory: 1007MB = 1007MB total
30[ 0.000000] Memory: 976116k/976116k available, 72460k reserved, 244736K highmem
31[ 0.000000] Virtual kernel memory layout:
32[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
33[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
34[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
35[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
36[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
37[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
38[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
39[ 0.000000] .text : 0xc0008000 - 0xc079bd78 (7760 kB)
40[ 0.000000] .init : 0xc079c000 - 0xc07e20e0 ( 281 kB)
41[ 0.000000] .data : 0xc07e4000 - 0xc0854078 ( 449 kB)
42[ 0.000000] .bss : 0xc085409c - 0xc08d1028 ( 500 kB)
43[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
44[ 0.000000] Preemptible hierarchical RCU implementation.
45[ 0.000000] NR_IRQS:410
46[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
47[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
48[ 0.000000] Console: colour dummy device 80x30
49[ 0.000091] Calibrating delay loop... 1830.74 BogoMIPS (lpj=7151616)
50[ 0.070373] pid_max: default: 32768 minimum: 301
51[ 0.070556] Security Framework initialized
52[ 0.070587] SELinux: Initializing.
53[ 0.070617] SELinux: Starting in permissive mode
54[ 0.070709] Mount-cache hash table entries: 512
55[ 0.071502] Initializing cgroup subsys cpuacct
56[ 0.071563] Initializing cgroup subsys memory
57[ 0.071594] Initializing cgroup subsys devices
58[ 0.071624] Initializing cgroup subsys freezer
59[ 0.071624] Initializing cgroup subsys blkio
60[ 0.071655] Initializing cgroup subsys perf_event
61[ 0.071746] CPU: Testing write buffer coherency: ok
62[ 0.071960] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
63[ 0.071960] Calibrating local timer... 448.85MHz.
64[ 0.117431] L310 cache controller enabled
65[ 0.117462] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
66[ 0.193908] CPU1: Booted secondary processor
67[ 0.193908] CPU1: Unknown IPI message 0x1
68[ 0.224151] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
69[ 0.224212] Brought up 2 CPUs
70[ 0.224212] SMP: Total of 2 processors activated (3619.48 BogoMIPS).
71[ 0.225006] devtmpfs: initialized
72[ 0.228179] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
73[ 0.281188] omap_hwmod: mcpdm: _wait_target_ready: -16
74[ 0.281188] ------------[ cut here ]------------
75[ 0.281219] WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1509 _enable+0x26c/0x2a4()
76[ 0.281219] Modules linked in:
77[ 0.281250] [<c0014210>] (unwind_backtrace+0x0/0xe0) from [<c004daf4>] (warn_slowpath_common+0x4c/0x64)
78[ 0.281280] [<c004daf4>] (warn_slowpath_common+0x4c/0x64) from [<c004db24>] (warn_slowpath_null+0x18/0x1c)
79[ 0.281280] [<c004db24>] (warn_slowpath_null+0x18/0x1c) from [<c001eae0>] (_enable+0x26c/0x2a4)
80[ 0.281311] [<c001eae0>] (_enable+0x26c/0x2a4) from [<c001eea8>] (_setup+0x84/0x154)
81[ 0.281311] [<c001eea8>] (_setup+0x84/0x154) from [<c001f0a4>] (omap_hwmod_for_each+0x28/0x58)
82[ 0.281341] [<c001f0a4>] (omap_hwmod_for_each+0x28/0x58) from [<c07a5a68>] (omap_hwmod_setup_all+0x6c/0x98)
83[ 0.281372] [<c07a5a68>] (omap_hwmod_setup_all+0x6c/0x98) from [<c000882c>] (do_one_initcall+0x90/0x160)
84[ 0.281372] [<c000882c>] (do_one_initcall+0x90/0x160) from [<c079c90c>] (kernel_init+0xb8/0x15c)
85[ 0.281402] [<c079c90c>] (kernel_init+0xb8/0x15c) from [<c000e51c>] (kernel_thread_exit+0x0/0x8)
86[ 0.281433] ---[ end trace da227214a82491b7 ]---
87[ 0.281433] omap_hwmod: mcpdm: cannot be enabled (3)
88[ 0.287963] Enabling ERRATA 751472
89[ 0.287994] OMAP4: Map 0xafe00000 to 0xfe600000 for dram barrier
90[ 0.288513] print_constraints: dummy:
91[ 0.289764] NET: Registered protocol family 16
92[ 0.305023] DMA: preallocated 256 KiB pool for atomic coherent allocations
93[ 0.305114] GPMC revision 6.0
94[ 0.306243] omap_device: omap_gpio.0: new worst case activate latency 0: 30517
95[ 0.306335] OMAP GPIO hardware version 0.1
96[ 0.307342] omap_mux_init: Add partition: #1: core, flags: 2
97[ 0.308105] omap_mux_init: Add partition: #2: wkup, flags: 2
98[ 0.308624] Calling omap_enable_smartreflex_on_init from board file
99[ 0.309051] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517
100[ 0.311950] _omap_mux_init_gpio: Could not set gpio7
101[ 0.311981] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
102[ 0.311981] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
103[ 0.312011] hw-breakpoint: maximum watchpoint size is 4 bytes.
104[ 0.313110] omap_init_sham: platform not supported
105[ 0.313140] omap_init_aes: platform not supported
106[ 0.314453] omap_ipussdev_init: could not look up fdif
107[ 0.315002] OMAP DMA hardware revision 0.0
108[ 0.319335] bio: create slab <bio-0> at 0
109[ 0.319793] print_constraints: vwl1271: 1800 mV
110[ 0.320281] i2c-core: driver [twl] using legacy suspend method
111[ 0.320281] i2c-core: driver [twl] using legacy resume method
112[ 0.320556] SCSI subsystem initialized
113[ 0.320800] omap_device: omap2_mcspi.1: new worst case deactivate latency 0: 30517
114[ 0.320953] omap_device: omap2_mcspi.3: new worst case activate latency 0: 30517
115[ 0.321350] usbcore: registered new interface driver usbfs
116[ 0.321380] usbcore: registered new interface driver hub
117[ 0.321472] usbcore: registered new device driver usb
118[ 0.330932] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
119[ 0.331359] Skipping twl internal clock init and using bootloader value (unknown osc rate)
120[ 0.331787] twl6030: PIH (irq 39) chaining IRQs 368..387
121[ 0.332214] print_constraints: VUSB: 3300 mV normal standby
122[ 0.529388] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
123[ 0.530273] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
124[ 0.530639] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
125[ 0.530975] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
126[ 0.531188] print_constraints: VCXIO: 1800 mV normal standby
127[ 0.531433] print_constraints: VDAC: 1800 mV normal standby
128[ 0.531768] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
129[ 0.531799] twl_reg twl_reg.37: Failed to set supply vmmc
130[ 0.531860] twl_reg twl_reg.37: can't register VAUX1_6030, -16
131[ 0.531890] twl_reg: probe of twl_reg.37 failed with error -16
132[ 0.532196] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
133[ 0.532531] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
134[ 0.532714] print_constraints: CLK32KG:
135[ 0.532867] print_constraints: VANA: 2100 mV normal standby
136[ 0.532958] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
137[ 0.544372] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
138[ 0.559631] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
139[ 0.574859] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
140[ 0.575225] Advanced Linux Sound Architecture Driver Version 1.0.24.
141[ 0.575592] NetLabel: Initializing
142[ 0.575622] NetLabel: domain hash size = 128
143[ 0.575622] NetLabel: protocols = UNLABELED CIPSOv4
144[ 0.575653] NetLabel: unlabeled traffic allowed by default
145[ 0.575683] Switching to clocksource 32k_counter
146[ 0.582489] Switched to NOHz mode on CPU #0
147[ 0.582733] Switched to NOHz mode on CPU #1
148[ 0.598144] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
149[ 0.598266] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
150[ 0.598297] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
151[ 0.598327] musb-hdrc: MHDRC RTL version 2.0
152[ 0.598327] musb-hdrc: setup fifo_mode 4
153[ 0.598358] musb-hdrc: 28/31 max ep, 16384/16384 memory
154[ 0.598571] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
155[ 0.598876] NET: Registered protocol family 2
156[ 0.599121] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
157[ 0.599975] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
158[ 0.601593] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
159[ 0.602539] TCP: Hash tables configured (established 131072 bind 65536)
160[ 0.602539] TCP reno registered
161[ 0.602569] UDP hash table entries: 512 (order: 2, 16384 bytes)
162[ 0.602600] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
163[ 0.602905] NET: Registered protocol family 1
164[ 0.603302] RPC: Registered named UNIX socket transport module.
165[ 0.603302] RPC: Registered udp transport module.
166[ 0.603302] RPC: Registered tcp transport module.
167[ 0.603302] RPC: Registered tcp NFSv4.1 backchannel transport module.
168[ 1.295166] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
169[ 1.295196] ipu-power initialized ipu, major: 252, minor: 0
170[ 1.295440] omap-iommu omap-iommu.0: ducati registered
171[ 1.295501] omap-iommu omap-iommu.1: tesla registered
172[ 1.295745] iovmm-omap initialized ducati, major: 251, base-minor: 0
173[ 1.295898] iovmm-omap initialized tesla, major: 251, base-minor: 1
174[ 1.296051] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
175[ 1.296203] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 250, base-minor: 0
176[ 1.296203] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
177[ 1.296356] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 250, base-minor: 1
178[ 1.296356] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
179[ 1.296508] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 250, base-minor: 2
180[ 1.296936] audit: initializing netlink socket (disabled)
181[ 1.296966] type=2000 audit(1.304:1): initialized
182[ 1.389221] highmem bounce pool size: 64 pages
183[ 1.396301] VFS: Disk quotas dquot_6.5.2
184[ 1.396636] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
185[ 1.400482] msgmni has been set to 1492
186[ 1.400848] SELinux: Registering netfilter hooks
187[ 1.401977] io scheduler noop registered
188[ 1.401977] io scheduler deadline registered
189[ 1.402069] io scheduler cfq registered (default)
190[ 1.402679] omap_device: omapdss_dss.-1: new worst case activate latency 0: 30517
191[ 1.402679] OMAP DSS rev 4.0
192[ 1.405303] omap_device: omapdss_dss.-1: new worst case deactivate latency 0: 2563476
193[ 1.413482] omap_device: omapdss_dispc.-1: new worst case deactivate latency 0: 2593994
194[ 1.424499] omapdss CORE error: driver probe failed: -22
195[ 1.424499] generic_dpi_panel: probe of display1 failed with error -22
196[ 1.433929] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
197[ 1.450775] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
198[ 1.466400] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
199[ 2.599884] console [ttyO2] enabled
200[ 2.669525] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
201[ 2.794708] [drm] Initialized drm 1.1.0 20060810
202[ 2.799987] brd: module loaded
203[ 2.806335] loop: module loaded
204[ 2.809967] Non-trimmed BGAP, Temp not accurate
205[ 2.814758] thermal_sensor_dev_register:Need to init the cpu domain
206[ 2.823913] omap_device: omap_i2c.1: new worst case activate latency 0: 30517
207[ 2.833923] tun: Universal TUN/TAP device driver, 1.6
208[ 2.839233] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
209[ 2.845977] usbcore: registered new interface driver smsc95xx
210[ 2.852050] cdc_ncm: 04-Aug-2011
211[ 2.855468] usbcore: registered new interface driver cdc_ncm
212[ 2.861572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
213[ 2.868469] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
214[ 2.868530] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
215[ 2.877014] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
216[ 2.877014] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
217[ 2.877044] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
218[ 2.883026] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
219[ 2.891082] ehci-omap ehci-omap.0: park 0
220[ 2.891082] ehci-omap ehci-omap.0: support lpm
221[ 2.891113] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
222[ 2.897186] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
223[ 2.897216] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
224[ 2.911682] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
225[ 2.917816] usb usb1: default language 0x0409
226[ 2.917846] usb usb1: udev 1, busnum 1, minor = 0
227[ 2.917846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
228[ 2.925018] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
229[ 2.932647] usb usb1: Product: OMAP-EHCI Host Controller
230[ 2.938262] usb usb1: Manufacturer: Linux 3.1.0 ehci_hcd
231[ 2.943878] usb usb1: SerialNumber: ehci-omap.0
232[ 2.948974] usb usb1: usb_probe_device
233[ 2.949005] usb usb1: configuration #1 chosen from 1 choice
234[ 2.949035] usb usb1: adding 1-0:1.0 (config #1, interface 0)
235[ 2.949127] hub 1-0:1.0: usb_probe_interface
236[ 2.949127] hub 1-0:1.0: usb_probe_interface - got id
237[ 2.949127] hub 1-0:1.0: USB hub found
238[ 2.953125] hub 1-0:1.0: 3 ports detected
239[ 2.957336] hub 1-0:1.0: standalone hub
240[ 2.957336] hub 1-0:1.0: individual port power switching
241[ 2.957336] hub 1-0:1.0: individual port over-current protection
242[ 2.957366] hub 1-0:1.0: power on to power good time: 20ms
243[ 2.957366] hub 1-0:1.0: local power source is good
244[ 2.957397] hub 1-0:1.0: enabling power on all ports
245[ 2.957550] ehci-omap ehci-omap.0: ...powerup ports...
246[ 2.982025] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
247[ 2.988525] ohci_hcd: block sizes: ed 64 td 64
248[ 2.988616] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
249[ 2.994903] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
250[ 3.002899] ohci-omap3 ohci-omap3.0: starting OHCI controller
251[ 3.003082] ohci-omap3 ohci-omap3.0: created debug files
252[ 3.003112] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
253[ 3.052307] ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
254[ 3.052337] hub 1-0:1.0: port 1: status 0501 change 0001
255[ 3.087432] ohci-omap3 ohci-omap3.0: OHCI controller state
256[ 3.087432] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers
257[ 3.087463] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
258[ 3.087463] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
259[ 3.087463] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
260[ 3.087493] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
261[ 3.087493] ohci-omap3 ohci-omap3.0: hcca frame #0014
262[ 3.087524] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
263[ 3.087524] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
264[ 3.087524] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
265[ 3.087554] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
266[ 3.087554] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
267[ 3.087585] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
268[ 3.087615] usb usb2: default language 0x0409
269[ 3.087646] usb usb2: udev 1, busnum 2, minor = 128
270[ 3.087646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
271[ 3.094818] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
272[ 3.102447] usb usb2: Product: OMAP3 OHCI Host Controller
273[ 3.108123] usb usb2: Manufacturer: Linux 3.1.0 ohci_hcd
274[ 3.113739] usb usb2: SerialNumber: ohci-omap3.0
275[ 3.118927] usb usb2: usb_probe_device
276[ 3.118927] usb usb2: configuration #1 chosen from 1 choice
277[ 3.118957] usb usb2: adding 2-0:1.0 (config #1, interface 0)
278[ 3.119049] hub 2-0:1.0: usb_probe_interface
279[ 3.119049] hub 2-0:1.0: usb_probe_interface - got id
280[ 3.119079] hub 2-0:1.0: USB hub found
281[ 3.123046] hub 2-0:1.0: 3 ports detected
282[ 3.127258] hub 2-0:1.0: standalone hub
283[ 3.127258] hub 2-0:1.0: no power switching (usb 1.0)
284[ 3.127288] hub 2-0:1.0: global over-current protection
285[ 3.127288] hub 2-0:1.0: power on to power good time: 20ms
286[ 3.127288] hub 2-0:1.0: local power source is good
287[ 3.127319] hub 2-0:1.0: no over-current condition exists
288[ 3.127319] hub 2-0:1.0: trying to enable port power on non-switchable hub
289[ 3.127563] Initializing USB Mass Storage driver...
290[ 3.132781] usbcore: registered new interface driver usb-storage
291[ 3.139129] USB Mass Storage support registered.
292[ 3.144287] mousedev: PS/2 mouse device common for all mice
293[ 3.150482] i2c-core: driver [tm12xx_ts] using legacy suspend method
294[ 3.157226] i2c-core: driver [tm12xx_ts] using legacy resume method
295[ 3.157226] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
296[ 3.157257] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
297[ 3.164154] input: twl6040:vibrator as /devices/platform/omap/omap_i2c.1/i2c-1/1-004b/twl6040/input/input0
298[ 3.174652] _regulator_get: twl6040-vibra supply vddvibl not found, using dummy regulator
299[ 3.183349] _regulator_get: twl6040-vibra supply vddvibr not found, using dummy regulator
300[ 3.192443] twl_rtc twl_rtc: Power up reset detected.
301[ 3.198638] twl_rtc twl_rtc: Enabling TWL-RTC.
302[ 3.204772] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
303[ 3.211364] i2c /dev entries driver
304[ 3.215606] Linux media interface: v0.10
305[ 3.219818] Linux video capture interface: v2.00
306[ 3.219970] ehci-omap ehci-omap.0: port 1 high speed
307[ 3.219970] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
308[ 3.226318] wl1273_fm_module_init
309[ 3.229858] Driver for 1-wire Dallas network protocol.
310[ 3.235382] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
311[ 3.244995] omap_device: omap_wdt.-1: new worst case activate latency 0: 91552
312[ 3.253143] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
313[ 3.260070] device-mapper: uevent: version 1.0.3
314[ 3.265319] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
315[ 3.274230] cpuidle: using governor ladder
316[ 3.278533] cpuidle: using governor menu
317[ 3.278869] usb 1-1: new high speed USB device number 2 using ehci-omap
318[ 3.289916] omap_device: omap_hsmmc.0: new worst case activate latency 0: 30517
319[ 3.299072] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
320[ 3.308776] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
321[ 3.317626] omap_device: omap_hsmmc.4: new worst case deactivate latency 0: 30517
322[ 3.325714] Registered led device: pandaboard::status1
323[ 3.325836] Registered led device: pandaboard::status2
324[ 3.326232] usbcore: registered new interface driver usbhid
325[ 3.332122] usbhid: USB HID core driver
326[ 3.336181] thermal_governor_dev_register:Adding omap_ondie_governor governor
327[ 3.343719] thermal_init_thermal_state:Not all components registered for cpu domain sensor (null), gov=ee1a92c0, cooling= (null)
328[ 3.343963] ehci-omap ehci-omap.0: port 1 high speed
329[ 3.343963] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
330[ 3.357147] proc4430_drv_initializeModule
331[ 3.361724] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
332[ 3.370300] omap-devh initialized Tesla, major: 241, base-minor: 0
333[ 3.376953] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
334[ 3.385528] omap-devh initialized SysM3, major: 241, base-minor: 1
335[ 3.392181] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
336[ 3.400756] omap-devh initialized AppM3, major: 241, base-minor: 2
337[ 3.408935] SDP4430 SoC init
338[ 3.412994] omap_device: aess.-1: new worst case activate latency 0: 30517
339[ 3.424713] omap_device: aess.-1: new worst case deactivate latency 0: 2563476
340[ 3.435516] usb 1-1: udev 2, busnum 1, minor = 1
341[ 3.435516] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
342[ 3.442596] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
343[ 3.450439] usb 1-1: usb_probe_device
344[ 3.450439] usb 1-1: configuration #1 chosen from 1 choice
345[ 3.450653] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
346[ 3.450775] hub 1-1:1.0: usb_probe_interface
347[ 3.450775] hub 1-1:1.0: usb_probe_interface - got id
348[ 3.450775] hub 1-1:1.0: USB hub found
349[ 3.454864] hub 1-1:1.0: 5 ports detected
350[ 3.459167] hub 1-1:1.0: compound device; port removable status: FRRRR
351[ 3.459167] hub 1-1:1.0: individual port power switching
352[ 3.459197] hub 1-1:1.0: individual port over-current protection
353[ 3.459442] hub 1-1:1.0: TT per port
354[ 3.459472] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
355[ 3.459472] hub 1-1:1.0: power on to power good time: 100ms
356[ 3.459747] hub 1-1:1.0: local power source is good
357[ 3.459747] hub 1-1:1.0: enabling power on all ports
358[ 3.460449] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
359[ 3.464141] asoc: null-codec-dai <-> MultiMedia1 mapping ok
360[ 3.470825] asoc: null-codec-dai <-> MultiMedia2 mapping ok
361[ 3.478149] asoc: null-codec-dai <-> Voice mapping ok
362[ 3.484436] asoc: null-codec-dai <-> Tones mapping ok
363[ 3.490570] asoc: null-codec-dai <-> Vibra mapping ok
364[ 3.496124] asoc: null-codec-dai <-> MODEM mapping ok
365[ 3.501647] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
366[ 3.509185] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
367[ 3.516021] asoc: twl6040-legacy <-> mcpdm-dl mapping ok
368[ 3.522369] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
369[ 3.528808] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
370[ 3.534454] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
371[ 3.539947] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
372[ 3.545562] asoc: twl6040-vib <-> mcpdm-vib mapping ok
373[ 3.551147] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
374[ 3.557220] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
375[ 3.563232] hub 1-1:1.0: port 1: status 0101 change 0001
376[ 3.563446] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
377[ 3.569488] hub 1-1:1.0: port 2: status 0301 change 0001
378[ 3.569824] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
379[ 3.575561] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
380[ 3.581909] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
381[ 3.588226] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
382[ 3.594421] mmc0: host does not support reading read-only switch. assuming write-enable.
383[ 3.603088] mmc0: new SDHC card at address e624
384[ 3.608337] mmcblk0: mmc0:e624 SU32G 29.7 GiB
385[ 3.610260] input: PandaES Headset Jack as /devices/platform/soc-audio/sound/card0/input1
386[ 3.612823] _regulator_get: soc-audio supply av-switch not found, using dummy regulator
387[ 3.612976] OMAP4 HDMI audio SoC init
388[ 3.634765] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok
389[ 3.642333] ALSA device list:
390[ 3.645477] #0: TI OMAP4 Board
391[ 3.648895] #1: TI OMAP4 HDMI Board
392[ 3.652740] oprofile: hardware counters not available
393[ 3.658081] oprofile: using timer interrupt.
394[ 3.658203] mmcblk0: p1 p2
395[ 3.666595] TCP cubic registered
396[ 3.670074] usb 1-1: link qh256-0001/ee19b6c0 start 1 [1/0 us]
397[ 3.670104] hub 1-1:1.0: state 7 ports 5 chg 0006 evt 0000
398[ 3.670379] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
399[ 3.670898] NET: Registered protocol family 10
400[ 3.677886] NET: Registered protocol family 17
401[ 3.682739] lib80211: common routines for IEEE802.11 drivers
402[ 3.688751] lib80211_crypt: registered algorithm 'NULL'
403[ 3.688781] Registering the dns_resolver key type
404[ 3.693817] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
405[ 3.701934] ThumbEE CPU extension supported.
406[ 3.706451] Registering SWP/SWPB emulation handler
407[ 3.714050] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
408[ 3.721313] omap2_set_init_voltage: Unable to put vdd_iva to its init voltage
409[ 3.721313]
410[ 3.730895] thermal_cooling_dev_register:Found cpu cpu
411[ 3.736328] thermal_cooling_dev_register: doing deferred tdev
412[ 3.742401] thermal_sensor_dev_register:Found cpu cpu
413[ 3.747741] thermal_sensor_dev_register:Adding omap_ondie_sensor sensor
414[ 3.754699] thermal_init_thermal_state: Getting initial temp for cpu domain
415[ 3.762115] thermal_request_temp
416[ 3.765563] usb 1-1.1: new high speed USB device number 3 using ehci-omap
417[ 3.765563] omap_safe_zone:hot spot temp 34743
418[ 3.765563] cpufreq_apply_cooling: Unthrottle cool level 0 curr cool 125000
419[ 3.765563] omap_thermal_step_freq_up: temperature reduced, stepping up to 0
420[ 3.765625] thermal_request_temp got 32200
421[ 3.765716] omap_sr_disable: omap_sr struct for sr_mpu not found
422[ 3.765716] omap_sr_disable: omap_sr struct for sr_mpu not found
423[ 3.765747] Power Management for TI OMAP4.
424[ 3.765869] sr_init: No PMIC hook to init smartreflex
425[ 3.766113] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
426[ 3.766235] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
427[ 3.766235] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
428[ 3.766235] SmartReflex Class3 initialized
429[ 3.766479] omap_device: smartreflex.2: new worst case activate latency 0: 244140
430[ 3.766510] sr_class3_enable: Curr voltage unknown. Cannot enable sr_iva
431[ 3.767028] CMA: reserved 32 MiB at ac000000
432[ 3.867980] registered taskstats version 1
433[ 3.872985] omap_device: omap_i2c.1: new worst case activate latency 0: 122070
434[ 3.881164] regulator_init_complete: VANA: incomplete constraints, leaving on
435[ 3.889312] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
436[ 3.897125] mmc1: card claims to support voltages below the defined range. These will be ignored.
437[ 3.898864] regulator_init_complete: VDAC: incomplete constraints, leaving on
438[ 3.899444] regulator_init_complete: VCXIO: incomplete constraints, leaving on
439[ 3.901123] regulator_init_complete: VUSB: incomplete constraints, leaving on
440[ 3.927276] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
441[ 3.937896] omap4iss omap4iss: Revision 40000103 found
442[ 3.946472] ov5650 3-0036: Failed reading register 0x302a!
443[ 3.952270] ov5650 3-0036: Failure to detect OV5650 chip
444[ 3.957916] iss_register_subdev_group: Unable to register subdev ov5650
445[ 3.965393] omap_device: omapdss_hdmi.-1: new worst case activate latency 0: 213623
446[ 3.974151] omap_vout omap_vout: 'hdmi' Display already enabled
447[ 3.980438] omap_vout omap_vout: 'hdmi' Display already enabled
448[ 3.986694] omap_vout omap_vout: Buffer Size = 3686400
449[ 3.992767] omap_vout omap_vout: : registered and initialized video device 2
450[ 4.000244] omap_vout omap_vout: Buffer Size = 3686400
451[ 4.006256] omap_vout omap_vout: : registered and initialized video device 3
452[ 4.026733] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
453[ 4.032897] usb 1-1.1: udev 3, busnum 1, minor = 2
454[ 4.032897] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
455[ 4.038726] mmc1: new SDIO card at address 0001
456[ 4.044982] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
457[ 4.052886] usb 1-1.1: usb_probe_device
458[ 4.053039] usb 1-1.1: configuration #1 chosen from 1 choice
459[ 4.055267] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
460[ 4.055267] smsc95xx 1-1.1:1.0: usb_probe_interface
461[ 4.055450] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
462[ 4.055450] smsc95xx v1.0.4
463[ 4.137542] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 0e:60:8c:56:4e:01
464[ 4.149627] omap_device: omap_hsmmc.4: new worst case deactivate latency 0: 61035
465[ 4.157806] hub 1-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
466[ 4.239929] ohci-omap3 ohci-omap3.0: auto-stop root hub
467[ 4.240173] usb 1-1.2: new low speed USB device number 4 using ehci-omap
468[ 4.368164] usb 1-1.2: skipped 1 descriptor after interface
469[ 4.368774] usb 1-1.2: default language 0x0409
470[ 4.370025] usb 1-1.2: udev 4, busnum 1, minor = 3
471[ 4.370056] usb 1-1.2: New USB device found, idVendor=04f3, idProduct=0212
472[ 4.377319] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
473[ 4.385040] usb 1-1.2: Product: PS/2+USB Mouse
474[ 4.390136] usb 1-1.2: usb_probe_device
475[ 4.390136] usb 1-1.2: configuration #1 chosen from 1 choice
476[ 4.390563] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
477[ 4.390563] usbhid 1-1.2:1.0: usb_probe_interface
478[ 4.390563] usbhid 1-1.2:1.0: usb_probe_interface - got id
479[ 4.393493] input: PS/2+USB Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
480[ 4.405395] generic-usb 0003:04F3:0212.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-ehci-omap.0-1.2/input0
481[ 4.411499] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0004
482[ 4.521209] omapdrm omapdrm.0: dvi has no driver.. skipping it
483[ 5.029022] No connectors reported connected with modes
484[ 5.034545] [drm] Cannot find any crtc or sizes - going 1024x768
485[ 5.080291] Console: switching to colour frame buffer device 128x48
486[ 5.096923] fb0: omapdrm frame buffer device
487[ 5.096923] drm: registered panic notifier
488[ 5.105743] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
489[ 5.112731] [drm] No driver support for vblank timestamp query.
490[ 5.118988] [drm] Initialized omapdrm 1.0.0 20110403 on minor 0
491[ 5.163604] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
492[ 5.172302] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
493[ 5.188476] devtmpfs: mounted
494[ 5.191833] Freeing init memory: 280K
495[ 5.987213] udev[77]: starting version 164
496[ 6.005493] hub 2-0:1.0: hub_suspend
497[ 6.005554] usb usb2: bus auto-suspend
498[ 6.005554] ohci-omap3 ohci-omap3.0: suspend root hub
499[ 6.380187] omap_vout omap_vout: Unable to apply changes
500[ 6.387725] omap_vout omap_vout: Unable to apply changes
501[ 6.421478] evbug: Connected device: input0 (twl6040:vibrator at unknown)
502[ 6.421966] evbug: Connected device: input1 (PandaES Headset Jack at ALSA)
503[ 6.421966] usb 1-1.2: link qh8-0e01/eb088080 start 2 [1/2 us]
504[ 6.421966] evbug: Connected device: input2 (PS/2+USB Mouse at usb-ehci-omap.0-1.2/input0)
505[ 6.490020] cfg80211: Calling CRDA to update world regulatory domain
506[ 6.833129] omap_device: omap_i2c.1: new worst case activate latency 0: 152587
507[ 6.903076] omap_device: omap_hsmmc.4: new worst case activate latency 0: 91552
508[ 7.212615] wl1271: ERROR could not get nvs file: -2
509[ 7.218017] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
510[ 7.218017] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
511[ 7.218048] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
512[ 7.218048] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
513[ 7.218078] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
514[ 7.218078] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
515[ 7.218078] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
516[ 7.218109] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
517[ 7.218109] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
518[ 7.218139] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
519[ 7.218139] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
520[ 7.218139] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
521[ 7.218170] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
522[ 7.218170] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
523[ 7.218200] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
524[ 7.218200] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
525[ 7.218200] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
526[ 7.218231] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
527[ 7.218231] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
528[ 7.218261] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
529[ 7.218261] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
530[ 7.218292] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
531[ 7.218292] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
532[ 7.218292] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
533[ 7.218322] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
534[ 7.218322] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
535[ 7.218353] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
536[ 7.218353] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
537[ 7.218353] cfg80211: Disabling freq 5035 MHz
538[ 7.218383] cfg80211: Disabling freq 5040 MHz
539[ 7.218383] cfg80211: Disabling freq 5045 MHz
540[ 7.218383] cfg80211: Disabling freq 5055 MHz
541[ 7.218414] cfg80211: Disabling freq 5060 MHz
542[ 7.218414] cfg80211: Disabling freq 5080 MHz
543[ 7.218414] cfg80211: Disabling freq 5170 MHz
544[ 7.218414] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
545[ 7.218444] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
546[ 7.218444] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
547[ 7.218475] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
548[ 7.218475] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
549[ 7.218505] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
550[ 7.218505] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
551[ 7.218505] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
552[ 7.218536] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
553[ 7.218536] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
554[ 7.218566] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
555[ 7.218566] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
556[ 7.218566] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
557[ 7.218597] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
558[ 7.218597] cfg80211: Disabling freq 5260 MHz
559[ 7.218597] cfg80211: Disabling freq 5280 MHz
560[ 7.218627] cfg80211: Disabling freq 5300 MHz
561[ 7.218627] cfg80211: Disabling freq 5320 MHz
562[ 7.218627] cfg80211: Disabling freq 5500 MHz
563[ 7.218658] cfg80211: Disabling freq 5520 MHz
564[ 7.218658] cfg80211: Disabling freq 5540 MHz
565[ 7.218658] cfg80211: Disabling freq 5560 MHz
566[ 7.218658] cfg80211: Disabling freq 5580 MHz
567[ 7.218688] cfg80211: Disabling freq 5600 MHz
568[ 7.218688] cfg80211: Disabling freq 5620 MHz
569[ 7.218688] cfg80211: Disabling freq 5640 MHz
570[ 7.218688] cfg80211: Disabling freq 5660 MHz
571[ 7.218719] cfg80211: Disabling freq 5680 MHz
572[ 7.218719] cfg80211: Disabling freq 5700 MHz
573[ 7.218719] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
574[ 7.218750] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
575[ 7.218750] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
576[ 7.218780] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
577[ 7.218780] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
578[ 7.218780] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
579[ 7.218811] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
580[ 7.218811] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
581[ 7.218841] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
582[ 7.218841] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
583[ 7.221618] wl1271: loaded
584[ 7.456848] EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered
585[ 7.928039] omap_device: omap_hsmmc.0: new worst case deactivate latency 0: 91552
586[ 8.721343] usb 1-1.1: link qh8-0001/eb0ba3c0 start 3 [1/0 us]
587[ 18.335906] omap_device: omap_i2c.1: new worst case activate latency 0: 1922607
588[ 33.173309] Bluetooth: Core ver 2.16
589[ 33.177154] NET: Registered protocol family 31
590[ 33.181854] Bluetooth: HCI device and connection manager initialized
591[ 33.188629] Bluetooth: HCI socket layer initialized
592[ 33.193786] Bluetooth: L2CAP socket layer initialized
593[ 33.193786] Bluetooth: SCO socket layer initialized
594[ 33.210510] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
595[ 33.257293] irda_init()
596[ 33.257293] NET: Registered protocol family 23
597[ 33.268585] IrCOMM protocol (Dag Brattli)
598[ 33.325592] Bluetooth: RFCOMM TTY layer initialized
599[ 33.330810] Bluetooth: RFCOMM socket layer initialized
600[ 33.336242] Bluetooth: RFCOMM ver 1.11
601[ 37.157043] ip_tables: (C) 2000-2006 Netfilter Core Team
602[ 37.196258] nf_conntrack version 0.5.0 (15768 buckets, 63072 max)
603[ 502.509277] evbug: Event. Dev: input2, Type: 2, Code: 1, Value: -1
604[ 502.509307] evbug: Event. Dev: input2, Type: 0, Code: 0, Value: 0