3Y7ERQbr

1/*************************************************************************************************************
2*
3* Title			    : Example DMX Receiver
4* Version		    : v 0.3
5* Last updated	            : 07.07.2012
6* Target		    : Arduino mega 2560, Arduino mega 1280, Arduino nano
7* Author                    : Toni Merino - merino.toni at gmail.com
8* Web                       : www.deskontrol.net/blog
9*
10**************************************************************************************************************/
11#include <lib_dmx.h>  // comment/uncomment #define USE_UARTx in lib_dmx.h as needed
12#include <Servo.h> 
13// This example receive 4 channels from address 1 to 4 and write analog values to PWM pins 2 to 5
14
15// outputs update in main loop
16
17
18//*********************************************************************************************************
19//                        New DMX modes *** EXPERIMENTAL ***
20//*********************************************************************************************************
21#define    DMX512     (0)    // (250 kbaud - 2 to 512 channels) Standard USITT DMX-512
22#define    DMX1024    (1)    // (500 kbaud - 2 to 1024 channels) Completely non standard - TESTED ok
23#define    DMX2048    (2)    // (1000 kbaud - 2 to 2048 channels) called by manufacturers DMX1000K, DMX 4x or DMX 1M ???
24
25void setup() 
26{
27  ArduinoDmx0.set_control_pin(2);    // Arduino output pin for MAX485 input/output control (connect to MAX485 pins 2-3) 
28  ArduinoDmx0.set_rx_address(1);      // set rx0 dmx start address
29  ArduinoDmx0.set_rx_channels(512);     // number of rx channels
30  ArduinoDmx0.init_rx(DMX512);   // starts universe 0 as rx, NEW Parameter DMX mode
31}  //end setup()
32
33void loop()
34{
35  //write values from dmx channels 1-4 universe 0 to arduino pwm pins 2-5
36  analogWrite(3, ArduinoDmx0.RxBuffer[0]);  //buffers 0 indexed
37  analogWrite(5, ArduinoDmx0.RxBuffer[1]);
38  analogWrite(6, ArduinoDmx0.RxBuffer[2]);
39  analogWrite(9, ArduinoDmx0.RxBuffer[3]);
40}  //end loop()