· 10 years ago · Aug 21, 2016, 07:50 AM
1login as: pi
2pi@192.168.29.165's password:
3
4The programs included with the Debian GNU/Linux system are free software;
5the exact distribution terms for each program are described in the
6individual files in /usr/share/doc/*/copyright.
7
8Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
9permitted by applicable law.
10Last login: Sun Aug 21 06:37:38 2016
11pi@raspberrypi:~ $ fdisk -l
12fdisk: cannot open /dev/ram0: Permission denied
13fdisk: cannot open /dev/ram1: Permission denied
14fdisk: cannot open /dev/ram2: Permission denied
15fdisk: cannot open /dev/ram3: Permission denied
16fdisk: cannot open /dev/ram4: Permission denied
17fdisk: cannot open /dev/ram5: Permission denied
18fdisk: cannot open /dev/ram6: Permission denied
19fdisk: cannot open /dev/ram7: Permission denied
20fdisk: cannot open /dev/ram8: Permission denied
21fdisk: cannot open /dev/ram9: Permission denied
22fdisk: cannot open /dev/ram10: Permission denied
23fdisk: cannot open /dev/ram11: Permission denied
24fdisk: cannot open /dev/ram12: Permission denied
25fdisk: cannot open /dev/ram13: Permission denied
26fdisk: cannot open /dev/ram14: Permission denied
27fdisk: cannot open /dev/ram15: Permission denied
28fdisk: cannot open /dev/mmcblk0: Permission denied
29pi@raspberrypi:~ $ sudo fdisk -l
30
31Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors
32Units: sectors of 1 * 512 = 512 bytes
33Sector size (logical/physical): 512 bytes / 4096 bytes
34I/O size (minimum/optimal): 4096 bytes / 4096 bytes
35Disk /dev/ram1: 4 MiB, 4194304 bytes, 8192 sectors
36Units: sectors of 1 * 512 = 512 bytes
37Sector size (logical/physical): 512 bytes / 4096 bytes
38I/O size (minimum/optimal): 4096 bytes / 4096 bytes
39Disk /dev/ram2: 4 MiB, 4194304 bytes, 8192 sectors
40Units: sectors of 1 * 512 = 512 bytes
41Sector size (logical/physical): 512 bytes / 4096 bytes
42I/O size (minimum/optimal): 4096 bytes / 4096 bytes
43Disk /dev/ram3: 4 MiB, 4194304 bytes, 8192 sectors
44Units: sectors of 1 * 512 = 512 bytes
45Sector size (logical/physical): 512 bytes / 4096 bytes
46I/O size (minimum/optimal): 4096 bytes / 4096 bytes
47Disk /dev/ram4: 4 MiB, 4194304 bytes, 8192 sectors
48Units: sectors of 1 * 512 = 512 bytes
49Sector size (logical/physical): 512 bytes / 4096 bytes
50I/O size (minimum/optimal): 4096 bytes / 4096 bytes
51Disk /dev/ram5: 4 MiB, 4194304 bytes, 8192 sectors
52Units: sectors of 1 * 512 = 512 bytes
53Sector size (logical/physical): 512 bytes / 4096 bytes
54I/O size (minimum/optimal): 4096 bytes / 4096 bytes
55Disk /dev/ram6: 4 MiB, 4194304 bytes, 8192 sectors
56Units: sectors of 1 * 512 = 512 bytes
57Sector size (logical/physical): 512 bytes / 4096 bytes
58I/O size (minimum/optimal): 4096 bytes / 4096 bytes
59Disk /dev/ram7: 4 MiB, 4194304 bytes, 8192 sectors
60Units: sectors of 1 * 512 = 512 bytes
61Sector size (logical/physical): 512 bytes / 4096 bytes
62I/O size (minimum/optimal): 4096 bytes / 4096 bytes
63Disk /dev/ram8: 4 MiB, 4194304 bytes, 8192 sectors
64Units: sectors of 1 * 512 = 512 bytes
65Sector size (logical/physical): 512 bytes / 4096 bytes
66I/O size (minimum/optimal): 4096 bytes / 4096 bytes
67Disk /dev/ram9: 4 MiB, 4194304 bytes, 8192 sectors
68Units: sectors of 1 * 512 = 512 bytes
69Sector size (logical/physical): 512 bytes / 4096 bytes
70I/O size (minimum/optimal): 4096 bytes / 4096 bytes
71Disk /dev/ram10: 4 MiB, 4194304 bytes, 8192 sectors
72Units: sectors of 1 * 512 = 512 bytes
73Sector size (logical/physical): 512 bytes / 4096 bytes
74I/O size (minimum/optimal): 4096 bytes / 4096 bytes
75Disk /dev/ram11: 4 MiB, 4194304 bytes, 8192 sectors
76Units: sectors of 1 * 512 = 512 bytes
77Sector size (logical/physical): 512 bytes / 4096 bytes
78I/O size (minimum/optimal): 4096 bytes / 4096 bytes
79Disk /dev/ram12: 4 MiB, 4194304 bytes, 8192 sectors
80Units: sectors of 1 * 512 = 512 bytes
81Sector size (logical/physical): 512 bytes / 4096 bytes
82I/O size (minimum/optimal): 4096 bytes / 4096 bytes
83Disk /dev/ram13: 4 MiB, 4194304 bytes, 8192 sectors
84Units: sectors of 1 * 512 = 512 bytes
85Sector size (logical/physical): 512 bytes / 4096 bytes
86I/O size (minimum/optimal): 4096 bytes / 4096 bytes
87Disk /dev/ram14: 4 MiB, 4194304 bytes, 8192 sectors
88Units: sectors of 1 * 512 = 512 bytes
89Sector size (logical/physical): 512 bytes / 4096 bytes
90I/O size (minimum/optimal): 4096 bytes / 4096 bytes
91Disk /dev/ram15: 4 MiB, 4194304 bytes, 8192 sectors
92Units: sectors of 1 * 512 = 512 bytes
93Sector size (logical/physical): 512 bytes / 4096 bytes
94I/O size (minimum/optimal): 4096 bytes / 4096 bytes
95Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors
96Units: sectors of 1 * 512 = 512 bytes
97Sector size (logical/physical): 512 bytes / 512 bytes
98I/O size (minimum/optimal): 512 bytes / 512 bytes
99Disklabel type: dos
100Disk identifier: 0x000835e8
101
102Device Boot Start End Sectors Size Id Type
103/dev/mmcblk0p1 8192 2289062 2280871 1.1G e W95 FAT16 (LBA)
104/dev/mmcblk0p2 2289063 62333951 60044889 28.6G 5 Extended
105/dev/mmcblk0p5 2293760 2359293 65534 32M 83 Linux
106/dev/mmcblk0p6 2359296 2488319 129024 63M c W95 FAT32 (LBA)
107/dev/mmcblk0p7 2490368 62333951 59843584 28.5G 83 Linux
108
109pi@raspberrypi:~ $ dmesg
110[ 0.000000] Booting Linux on physical CPU 0x0
111[ 0.000000] Initializing cgroup subsys cpuset
112[ 0.000000] Initializing cgroup subsys cpu
113[ 0.000000] Initializing cgroup subsys cpuacct
114[ 0.000000] Linux version 4.4.11-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #888 SMP Mon May 23 20:10:33 BS T 2016
115[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
116[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
117[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
118[ 0.000000] cma: Reserved 8 MiB at 0x3a800000
119[ 0.000000] Memory policy: Data cache writealloc
120[ 0.000000] On node 0 totalpages: 241664
121[ 0.000000] free_area_init_node: node 0, pgdat 808c0dc0, node_mem_map b9fa600 0
122[ 0.000000] Normal zone: 2124 pages used for memmap
123[ 0.000000] Normal zone: 0 pages reserved
124[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
125[ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
126[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
127[ 0.000000] PERCPU: Embedded 13 pages/cpu @b9f62000 s22592 r8192 d22464 u5324 8
128[ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
129[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
130[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 239540
131[ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_ fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa22082 bcm2709.seria l=0xf16a4974 smsc95xx.macaddr=B8:27:EB:6A:49:74 bcm2708_fb.fbswap=1 bcm2709.uart _clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.l pm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext 4 elevator=deadline fsck.repair=yes rootwait
132[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
133[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
134[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
135[ 0.000000] Memory: 939080K/966656K available (6344K kernel code, 432K rwdata , 1712K rodata, 476K init, 764K bss, 19384K reserved, 8192K cma-reserved)
136[ 0.000000] Virtual kernel memory layout:
137 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
138 fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
139 vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
140 lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
141 modules : 0x7f000000 - 0x80000000 ( 16 MB)
142 .text : 0x80008000 - 0x807e6420 (8058 kB)
143 .init : 0x807e7000 - 0x8085e000 ( 476 kB)
144 .data : 0x8085e000 - 0x808ca0c8 ( 433 kB)
145 .bss : 0x808cd000 - 0x8098c1ac ( 765 kB)
146[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
147[ 0.000000] Hierarchical RCU implementation.
148[ 0.000000] Build-time adjustment of leaf fanout to 32.
149[ 0.000000] NR_IRQS:16 nr_irqs:16 16
150[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
151[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
152[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980 46511078ns
153[ 0.000025] Switching to timer-based delay loop, resolution 52ns
154[ 0.000289] Console: colour dummy device 80x30
155[ 0.001339] console [tty1] enabled
156[ 0.001385] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000)
157[ 0.001453] pid_max: default: 32768 minimum: 301
158[ 0.001787] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
159[ 0.001829] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
160[ 0.002777] Disabling cpuset control group subsystem
161[ 0.002833] Initializing cgroup subsys io
162[ 0.002884] Initializing cgroup subsys memory
163[ 0.002944] Initializing cgroup subsys devices
164[ 0.002987] Initializing cgroup subsys freezer
165[ 0.003031] Initializing cgroup subsys net_cls
166[ 0.003101] CPU: Testing write buffer coherency: ok
167[ 0.003186] ftrace: allocating 21205 entries in 63 pages
168[ 0.052269] CPU0: update cpu_capacity 1024
169[ 0.052332] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
170[ 0.052365] [bcm2709_smp_prepare_cpus] enter
171[ 0.052513] Setting up static identity map for 0x8240 - 0x8274
172[ 0.054183] [bcm2709_boot_secondary] cpu:1 started (0) 18
173[ 0.054507] [bcm2709_secondary_init] enter cpu:1
174[ 0.054550] CPU1: update cpu_capacity 1024
175[ 0.054556] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
176[ 0.054936] [bcm2709_boot_secondary] cpu:2 started (0) 16
177[ 0.055197] [bcm2709_secondary_init] enter cpu:2
178[ 0.055218] CPU2: update cpu_capacity 1024
179[ 0.055224] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
180[ 0.055585] [bcm2709_boot_secondary] cpu:3 started (0) 17
181[ 0.055767] [bcm2709_secondary_init] enter cpu:3
182[ 0.055787] CPU3: update cpu_capacity 1024
183[ 0.055793] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
184[ 0.055853] Brought up 4 CPUs
185[ 0.055951] SMP: Total of 4 processors activated (153.60 BogoMIPS).
186[ 0.055980] CPU: All CPU(s) started in HYP mode.
187[ 0.056006] CPU: Virtualization extensions available.
188[ 0.056634] devtmpfs: initialized
189[ 0.066741] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
190[ 0.067099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
191[ 0.067839] pinctrl core: initialized pinctrl subsystem
192[ 0.068396] NET: Registered protocol family 16
193[ 0.073577] DMA: preallocated 4096 KiB pool for atomic coherent allocations
194[ 0.080313] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
195[ 0.080362] hw-breakpoint: maximum watchpoint size is 8 bytes.
196[ 0.080543] Serial: AMBA PL011 UART driver
197[ 0.080697] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gp io@7e200000/uart0_pins, deferring probe
198[ 0.080902] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
199[ 0.142956] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dma chans=0x1
200[ 0.144632] SCSI subsystem initialized
201[ 0.144829] usbcore: registered new interface driver usbfs
202[ 0.144938] usbcore: registered new interface driver hub
203[ 0.145056] usbcore: registered new device driver usb
204[ 0.151839] raspberrypi-firmware soc:firmware: Attached to firmware from 2016 -05-20 19:01
205[ 0.179108] clocksource: Switched to clocksource arch_sys_counter
206[ 0.224381] FS-Cache: Loaded
207[ 0.224685] CacheFiles: Loaded
208[ 0.236885] NET: Registered protocol family 2
209[ 0.237761] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
210[ 0.237898] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
211[ 0.238109] TCP: Hash tables configured (established 8192 bind 8192)
212[ 0.238222] UDP hash table entries: 512 (order: 2, 16384 bytes)
213[ 0.238289] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
214[ 0.238546] NET: Registered protocol family 1
215[ 0.238876] RPC: Registered named UNIX socket transport module.
216[ 0.238909] RPC: Registered udp transport module.
217[ 0.238936] RPC: Registered tcp transport module.
218[ 0.238963] RPC: Registered tcp NFSv4.1 backchannel transport module.
219[ 0.240062] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counter s available
220[ 0.241437] futex hash table entries: 1024 (order: 4, 65536 bytes)
221[ 0.254542] VFS: Disk quotas dquot_6.6.0
222[ 0.254865] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
223[ 0.257180] FS-Cache: Netfs 'nfs' registered for caching
224[ 0.258082] NFS: Registering the id_resolver key type
225[ 0.258150] Key type id_resolver registered
226[ 0.258178] Key type id_legacy registered
227[ 0.260503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
228[ 0.260680] io scheduler noop registered
229[ 0.260719] io scheduler deadline registered (default)
230[ 0.260792] io scheduler cfq registered
231[ 0.263314] BCM2708FB: allocated DMA memory fac00000
232[ 0.263361] BCM2708FB: allocated DMA channel 0 @ f3007000
233[ 0.293748] Console: switching to colour frame buffer device 240x67
234[ 1.221338] bcm2835-rng 3f104000.rng: hwrng registered
235[ 1.221583] vc-cma: Videocore CMA driver
236[ 1.221661] vc-cma: vc_cma_base = 0x00000000
237[ 1.221742] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
238[ 1.221834] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
239[ 1.222142] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000 000(1008 MiB)
240[ 1.236974] brd: module loaded
241[ 1.245663] loop: module loaded
242[ 1.246667] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
243[ 1.248253] Loading iSCSI transport class v2.0-870.
244[ 1.248968] usbcore: registered new interface driver smsc95xx
245[ 1.249151] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
246[ 1.449503] Core Release: 2.80a
247[ 1.449573] Setting default values for core params
248[ 1.449680] Finished setting default values for core params
249[ 1.650137] Using Buffer DMA mode
250[ 1.650203] Periodic Transfer Interrupt Enhancement - disabled
251[ 1.650299] Multiprocessor Interrupt Enhancement - disabled
252[ 1.650392] OTG VER PARAM: 0, OTG VER FLAG: 0
253[ 1.650474] Dedicated Tx FIFOs mode
254[ 1.650821] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac 14000 dma = 0xfac14000 len=9024
255[ 1.650997] FIQ FSM acceleration enabled for :
256Non-periodic Split Transactions
257Periodic Split Transactions
258High-Speed Isochronous Endpoints
259Interrupt/Control Split Transaction hack enabled
260[ 1.651336] dwc_otg: Microframe scheduler enabled
261[ 1.651389] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x804464e4
262[ 1.651498] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446854 length 36
263[ 1.651608] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbbc7e000
264[ 1.651764] dwc_otg 3f980000.usb: DWC OTG Controller
265[ 1.651878] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
266[ 1.652022] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
267[ 1.656607] Init: Port Power? op_state=1
268[ 1.661144] Init: Power Port (0)
269[ 1.665845] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
270[ 1.670419] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
271[ 1.674959] usb usb1: Product: DWC OTG Controller
272[ 1.679488] usb usb1: Manufacturer: Linux 4.4.11-v7+ dwc_otg_hcd
273[ 1.684004] usb usb1: SerialNumber: 3f980000.usb
274[ 1.689313] hub 1-0:1.0: USB hub found
275[ 1.693795] hub 1-0:1.0: 1 port detected
276[ 1.698810] dwc_otg: FIQ enabled
277[ 1.698819] dwc_otg: NAK holdoff enabled
278[ 1.698827] dwc_otg: FIQ split-transaction FSM enabled
279[ 1.698867] Module dwc_common_port init
280[ 1.699158] usbcore: registered new interface driver usb-storage
281[ 1.703903] mousedev: PS/2 mouse device common for all mice
282[ 1.709156] bcm2835-cpufreq: min=600000 max=1200000
283[ 1.713976] sdhci: Secure Digital Host Controller Interface driver
284[ 1.718515] sdhci: Copyright(c) Pierre Ossman
285[ 1.723340] sdhost: log_buf @ bac13000 (fac13000)
286[ 1.799135] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
287[ 1.805860] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
288[ 1.810336] mmc-bcm2835 3f300000.mmc: DMA channel allocated
289[ 1.859220] sdhci-pltfm: SDHCI platform and OF driver helper
290[ 1.864033] ledtrig-cpu: registered to indicate activity on CPUs
291[ 1.868573] hidraw: raw HID events driver (C) Jiri Kosina
292[ 1.873236] usbcore: registered new interface driver usbhid
293[ 1.877659] usbhid: USB HID core driver
294[ 1.882595] Initializing XFRM netlink socket
295[ 1.886996] NET: Registered protocol family 17
296[ 1.891485] Indeed it is in host mode hprt0 = 00021501
297[ 1.898643] mmc0: host does not support reading read-only switch, assuming wr ite-enable
298[ 1.906520] mmc0: new high speed SDHC card at address aaaa
299[ 1.911553] Key type dns_resolver registered
300[ 1.911658] mmcblk0: mmc0:aaaa SL32G 29.7 GiB
301[ 1.921091] Registering SWP/SWPB emulation handler
302[ 1.926136] mmcblk0: p1 p2 < p5 p6 p7 >
303[ 1.926297] registered taskstats version 1
304[ 1.926489] vc-sm: Videocore shared memory driver
305[ 1.926498] [vc_sm_connected_init]: start
306[ 1.940001] [vc_sm_connected_init]: end - returning 0
307[ 1.941371] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
308[ 1.941722] of_cfs_init
309[ 1.941810] of_cfs_init: OK
310[ 1.979972] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
311[ 1.982540] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. O pts: (null)
312[ 1.982584] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
313[ 1.995159] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
314[ 1.999855] devtmpfs: mounted
315[ 2.001332] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
316[ 2.004136] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
317[ 2.014166] Freeing unused kernel memory: 476K (807e7000 - 8085e000)
318[ 2.069164] usb 1-1: new high-speed USB device number 2 using dwc_otg
319[ 2.073875] Indeed it is in host mode hprt0 = 00001101
320[ 2.095852] mmc1: new high speed SDIO card at address 0001
321[ 2.269491] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
322[ 2.269640] random: systemd urandom read with 38 bits of entropy available
323[ 2.278498] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
324[ 2.283329] hub 1-1:1.0: USB hub found
325[ 2.288070] hub 1-1:1.0: 5 ports detected
326[ 2.294741] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
327[ 2.299957] systemd[1]: Detected architecture 'arm'.
328[ 2.436057] NET: Registered protocol family 10
329[ 2.442411] systemd[1]: Inserted module 'ipv6'
330[ 2.450335] systemd[1]: Set hostname to <raspberrypi>.
331[ 2.569192] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
332[ 2.669470] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
333[ 2.674342] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
334[ 2.682333] smsc95xx v1.0.4
335[ 2.752902] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb- 1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:6a:49:74
336[ 2.849164] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
337[ 2.883066] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
338[ 2.888481] systemd[1]: Started Forward Password Requests to Wall Directory W atch.
339[ 2.893743] systemd[1]: Starting Remote File Systems (Pre).
340[ 2.904842] systemd[1]: Reached target Remote File Systems (Pre).
341[ 2.909973] systemd[1]: Starting Encrypted Volumes.
342[ 2.920891] systemd[1]: Reached target Encrypted Volumes.
343[ 2.926047] systemd[1]: Starting Arbitrary Executable File Formats File Syste m Automount Point.
344[ 2.937625] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point.
345[ 2.942967] systemd[1]: Starting Swap.
346[ 2.954330] systemd[1]: Reached target Swap.
347[ 2.959713] systemd[1]: Expecting device dev-mmcblk0p6.device...
348[ 2.971119] systemd[1]: Starting Root Slice.
349[ 2.982860] systemd[1]: Created slice Root Slice.
350[ 2.988110] systemd[1]: Starting User and Session Slice.
351[ 2.998352] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
352[ 2.998362] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0
353[ 2.998369] usb 1-1.2: Product: USB Receiver
354[ 2.998377] usb 1-1.2: Manufacturer: Logitech
355[ 3.020784] systemd[1]: Created slice User and Session Slice.
356[ 3.026122] systemd[1]: Starting Delayed Shutdown Socket.
357[ 3.035249] input: Logitech USB Receiver as /devices/platform/soc/3f980000.us b/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0001/input/input0
358[ 3.043615] systemd[1]: Listening on Delayed Shutdown Socket.
359[ 3.049121] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
360[ 3.061205] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
361[ 3.066703] systemd[1]: Starting Journal Socket (/dev/log).
362[ 3.078646] systemd[1]: Listening on Journal Socket (/dev/log).
363[ 3.084169] systemd[1]: Starting udev Control Socket.
364[ 3.090079] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Key board [Logitech USB Receiver] on usb-3f980000.usb-1.2/input0
365[ 3.102040] systemd[1]: Listening on udev Control Socket.
366[ 3.107779] systemd[1]: Starting udev Kernel Socket.
367[ 3.117886] input: Logitech USB Receiver as /devices/platform/soc/3f980000.us b/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0002/input/input1
368[ 3.125960] systemd[1]: Listening on udev Kernel Socket.
369[ 3.131845] systemd[1]: Starting Journal Socket.
370[ 3.144439] systemd[1]: Listening on Journal Socket.
371[ 3.150377] systemd[1]: Starting System Slice.
372[ 3.162649] systemd[1]: Created slice System Slice.
373[ 3.168303] systemd[1]: Starting File System Check on Root Device...
374[ 3.169898] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v 1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.2/input1
375[ 3.194124] hid-generic 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 D evice [Logitech USB Receiver] on usb-3f980000.usb-1.2/input2
376[ 3.219781] systemd[1]: Starting system-systemd\x2dfsck.slice.
377[ 3.233744] systemd[1]: Created slice system-systemd\x2dfsck.slice.
378[ 3.240082] systemd[1]: Starting system-autologin.slice.
379[ 3.254145] systemd[1]: Created slice system-autologin.slice.
380[ 3.260399] systemd[1]: Starting Increase datagram queue length...
381[ 3.276322] systemd[1]: Starting Restore / save the current clock...
382[ 3.317264] systemd[1]: Starting Load Kernel Modules...
383[ 3.336116] systemd[1]: Mounted Huge Pages File System.
384[ 3.343118] systemd[1]: Mounting POSIX Message Queue File System...
385[ 3.360674] systemd[1]: Starting Create list of required static device nodes for the current kernel...
386[ 3.390477] systemd[1]: Started Set Up Additional Binary Formats.
387[ 3.397023] systemd[1]: Mounting Debug File System...
388[ 3.413022] systemd[1]: Starting udev Coldplug all Devices...
389[ 3.431571] fuse init (API version 7.23)
390[ 3.431788] systemd[1]: Starting Slices.
391[ 3.449207] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
392[ 3.458545] systemd[1]: Reached target Slices.
393[ 3.473690] systemd[1]: Mounted Debug File System.
394[ 3.487396] systemd[1]: Mounted POSIX Message Queue File System.
395[ 3.501486] systemd[1]: Started Increase datagram queue length.
396[ 3.513763] i2c /dev entries driver
397[ 3.527012] systemd[1]: Started Restore / save the current clock.
398[ 3.543156] systemd[1]: Started Load Kernel Modules.
399[ 3.557099] systemd[1]: Started Create list of required static device nodes f or the current kernel.
400[ 3.622950] systemd[1]: Started File System Check on Root Device.
401[ 3.630553] systemd[1]: Time has been changed
402[ 3.661412] systemd[1]: Started udev Coldplug all Devices.
403[ 3.789449] systemd[1]: Starting Create Static Device Nodes in /dev...
404[ 3.839775] systemd[1]: Starting Apply Kernel Variables...
405[ 3.855710] systemd[1]: Mounting Configuration File System...
406[ 3.871096] systemd[1]: Mounting FUSE Control File System...
407[ 3.886977] systemd[1]: Starting Syslog Socket.
408[ 3.900735] systemd[1]: Listening on Syslog Socket.
409[ 3.900948] systemd[1]: Starting Journal Service...
410[ 3.909465] usb 1-1.4: new high-speed USB device number 6 using dwc_otg
411[ 3.917340] systemd[1]: Started Journal Service.
412[ 4.010049] usb 1-1.4: New USB device found, idVendor=1058, idProduct=10a8
413[ 4.010072] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber =3
414[ 4.010085] usb 1-1.4: Product: Elements 10A8
415[ 4.010097] usb 1-1.4: Manufacturer: Western Digital
416[ 4.010110] usb 1-1.4: SerialNumber: 575835314136335835323336
417[ 4.011043] usb-storage 1-1.4:1.0: USB Mass Storage device detected
418[ 4.011340] scsi host0: usb-storage 1-1.4:1.0
419[ 4.097632] systemd-udevd[140]: starting version 215
420[ 4.576362] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
421[ 4.590671] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2 00000
422[ 4.839756] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
423[ 4.866394] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength in it done for chip 43430 rev 1 pmurev 24
424[ 4.867217] usbcore: registered new interface driver brcmfmac
425[ 5.019322] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2 015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
426[ 5.042514] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
427[ 5.171344] random: nonblocking pool is initialized
428[ 5.183346] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
429[ 5.183374] cfg80211: World regulatory domain updated:
430[ 5.183385] cfg80211: DFS Master region: unset
431[ 5.183393] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp), (dfs_cac_time)
432[ 5.183408] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 m Bm), (N/A)
433[ 5.183420] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 m Bm), (N/A)
434[ 5.183432] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 m Bm), (N/A)
435[ 5.183447] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AU TO), (N/A, 2000 mBm), (N/A)
436[ 5.183461] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AU TO), (N/A, 2000 mBm), (0 s)
437[ 5.183473] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
438[ 5.183485] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 m Bm), (N/A)
439[ 5.183497] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
440[ 5.193308] scsi 0:0:0:0: Direct-Access WD Elements 10A8 1042 PQ : 0 ANSI: 6
441[ 5.194587] sd 0:0:0:0: [sda] 976707584 512-byte logical blocks: (500 GB/466 GiB)
442[ 5.195031] sd 0:0:0:0: [sda] Write Protect is off
443[ 5.195051] sd 0:0:0:0: [sda] Mode Sense: 53 00 10 08
444[ 5.195429] sd 0:0:0:0: [sda] No Caching mode page found
445[ 5.195445] sd 0:0:0:0: [sda] Assuming drive cache: write through
446[ 5.208492] sda: sda1
447[ 5.210956] sd 0:0:0:0: [sda] Attached SCSI disk
448[ 5.223120] sd 0:0:0:0: Attached scsi generic sg0 type 0
449[ 5.680292] systemd-journald[134]: Received request to flush runtime journal from PID 1
450[ 9.429391] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
451[ 9.429419] brcmfmac: brcmf_add_if: ignore IF event
452[ 9.434332] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
453[ 9.434377] brcmfmac: power management disabled
454[ 9.654204] uart-pl011 3f201000.uart: no DMA platform data
455[ 10.084921] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:1 02396k SSFS
456[ 10.149600] cfg80211: Regulatory domain changed to country: GB
457[ 10.149628] cfg80211: DFS Master region: ETSI
458[ 10.149638] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp), (dfs_cac_time)
459[ 10.149652] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 m Bm), (N/A)
460[ 10.149667] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AU TO), (N/A, 2000 mBm), (N/A)
461[ 10.149682] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AU TO), (N/A, 2000 mBm), (0 s)
462[ 10.149695] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
463[ 10.149719] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 40 00 mBm), (N/A)
464[ 10.871653] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
465[ 10.871952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
466[ 11.460396] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
467[ 19.506423] Bluetooth: Core ver 2.21
468[ 19.506510] NET: Registered protocol family 31
469[ 19.506520] Bluetooth: HCI device and connection manager initialized
470[ 19.506545] Bluetooth: HCI socket layer initialized
471[ 19.506562] Bluetooth: L2CAP socket layer initialized
472[ 19.506596] Bluetooth: SCO socket layer initialized
473[ 19.668846] Bluetooth: HCI UART driver ver 2.3
474[ 19.668852] Bluetooth: HCI UART protocol H4 registered
475[ 19.668856] Bluetooth: HCI UART protocol Three-wire (H5) registered
476[ 19.669018] Bluetooth: HCI UART protocol BCM registered
477[ 19.998259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
478[ 19.998284] Bluetooth: BNEP filters: protocol multicast
479[ 19.998311] Bluetooth: BNEP socket layer initialized
480[ 2011.064925] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
481[ 3486.203777] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
482[ 3486.283770] usb 1-1.4: device descriptor read/64, error -71
483[ 3486.473774] usb 1-1.4: device descriptor read/64, error -71
484[ 3486.663806] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
485[ 3486.743778] usb 1-1.4: device descriptor read/64, error -71
486[ 3486.933773] usb 1-1.4: device descriptor read/64, error -71
487[ 3487.123775] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
488[ 3487.543780] usb 1-1.4: device not accepting address 6, error -71
489[ 3487.623780] usb 1-1.4: reset high-speed USB device number 6 using dwc_otg
490[ 3488.043775] usb 1-1.4: device not accepting address 6, error -71
491[ 3488.044036] usb 1-1.4: USB disconnect, device number 6
492[ 3488.063876] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 dri verbyte=0x00
493[ 3488.063907] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 08 68 14 40 00 00 f0 00
494[ 3488.063923] blk_update_request: I/O error, dev sda, sector 141038656
495[ 3488.063939] Buffer I/O error on dev sda1, logical block 17629576, lost async page write
496[ 3488.063969] Buffer I/O error on dev sda1, logical block 17629577, lost async page write
497[ 3488.063986] Buffer I/O error on dev sda1, logical block 17629578, lost async page write
498[ 3488.064002] Buffer I/O error on dev sda1, logical block 17629579, lost async page write
499[ 3488.064018] Buffer I/O error on dev sda1, logical block 17629580, lost async page write
500[ 3488.064033] Buffer I/O error on dev sda1, logical block 17629581, lost async page write
501[ 3488.064050] Buffer I/O error on dev sda1, logical block 17629582, lost async page write
502[ 3488.064066] Buffer I/O error on dev sda1, logical block 17629583, lost async page write
503[ 3488.064083] Buffer I/O error on dev sda1, logical block 17629584, lost async page write
504[ 3488.064099] Buffer I/O error on dev sda1, logical block 17629585, lost async page write
505[ 3488.068142] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 dri verbyte=0x00
506[ 3488.068163] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x2a 2a 00 08 68 15 30 00 00 f0 00
507[ 3488.068177] blk_update_request: I/O error, dev sda, sector 141038896
508[ 3488.253786] usb 1-1.4: new high-speed USB device number 7 using dwc_otg
509[ 3488.333787] usb 1-1.4: device descriptor read/64, error -71
510[ 3488.523777] usb 1-1.4: device descriptor read/64, error -71
511[ 3488.713765] usb 1-1.4: new high-speed USB device number 8 using dwc_otg
512[ 3488.793784] usb 1-1.4: device descriptor read/64, error -71
513[ 3488.983785] usb 1-1.4: device descriptor read/64, error -71
514[ 3489.173787] usb 1-1.4: new high-speed USB device number 9 using dwc_otg
515[ 3489.593787] usb 1-1.4: device not accepting address 9, error -71
516[ 3489.673790] usb 1-1.4: new high-speed USB device number 10 using dwc_otg
517[ 3490.093792] usb 1-1.4: device not accepting address 10, error -71
518[ 3490.093880] usb 1-1-port4: unable to enumerate USB device
519[ 3648.613423] buffer_io_error: 50 callbacks suppressed
520[ 3648.613448] Buffer I/O error on dev sda1, logical block 4877269, async page r ead
521[ 3648.616997] Buffer I/O error on dev sda1, logical block 4877269, async page r ead
522[ 3649.922312] Buffer I/O error on dev sda1, logical block 33461, async page rea d
523[ 3649.924438] Buffer I/O error on dev sda1, logical block 33458, async page rea d
524[ 3655.795821] Buffer I/O error on dev sda1, logical block 33461, async page rea d
525[ 3655.797908] Buffer I/O error on dev sda1, logical block 33458, async page rea d
526[ 3658.531640] Buffer I/O error on dev sda1, logical block 33461, async page rea d
527[ 3658.533607] Buffer I/O error on dev sda1, logical block 33458, async page rea d
528[ 3702.362851] Buffer I/O error on dev sda1, logical block 33461, async page rea d
529[ 3702.366426] Buffer I/O error on dev sda1, logical block 33458, async page rea d
530[ 3707.625893] Buffer I/O error on dev sda1, logical block 33461, async page rea d
531[ 3707.630922] Buffer I/O error on dev sda1, logical block 33458, async page rea d
532[ 3717.696483] Buffer I/O error on dev sda1, logical block 33461, async page rea d
533[ 3717.698547] Buffer I/O error on dev sda1, logical block 33458, async page rea d
534[ 3735.411880] Buffer I/O error on dev sda1, logical block 33461, async page rea d
535[ 3735.415738] Buffer I/O error on dev sda1, logical block 33461, async page rea d
536[ 3735.419418] Buffer I/O error on dev sda1, logical block 33458, async page rea d
537[ 3735.422736] Buffer I/O error on dev sda1, logical block 33461, async page rea d
538[ 3735.438904] Buffer I/O error on dev sda1, logical block 33458, async page rea d
539pi@raspberrypi:~ $