· 5 years ago · Sep 28, 2020, 08:26 PM
1BCM72300012
2x
3AVS 0.5.5
4B1
5PV=0000030C
6PV=0000031C
7MV=000003A7
8
9M0
10SHMOO VER 1.14
11MCB
12
13PKID 20121012 003B6000 003B0000 041B103F 00001C00
14
15S3000018B
1600000E40
17+00000004
18RDLY W0 00000004
19
20RDEN W0 0000001F
21
22RDQS W0
23
24 0000000000111111111122222222223333333333444444444455555555556666
25 0123456789012345678901234567890123456789012345678901234567890123
26 00 ----------+-++++++++++++++++++X+++++++++++++++++----------------
27 01 ---------+++++++++++++++++X++++++++++++++++---------------------
28 02 ------------++++++++++++++++++X+++++++++++++++++----------------
29 03 -----------++++++++++++++++++X+++++++++++++++++-----------------
30 04 ------++++++++++++++++++X+++++++++++++++++----------------------
31 05 ---+--++++++++++++++++++X++++++++++++++++++---------------------
32 06 -------+++++++++++++++++X+++++++++++++++++----------------------
33 07 ---------++++++++++++++++++X+++++++++++++++++-------------------
34 08 -------++++++++++++++++X++++++++++++++++------------------------
35 09 ---------+++++++++++++++++X+++++++++++++++++--------------------
36 10 ---------+++++++++++++++++X+++++++++++++++++--------------------
37 11 ---------+++++++++++++++++X+++++++++++++++++--------------------
38 12 ------+++++++++++++++++X++++++++++++++++------------------------
39 13 ---++-+++++++++++++++X+++++++++++++++---------------------------
40 14 ----+++++++++++++++++X++++++++++++++++--------------------------
41 15 ----------++++++++++++++++X++++++++++++++++---------------------
42
43
44P W0
45
46 0000000000111111111122222222223333333333444444444455555555556666
47 0123456789012345678901234567890123456789012345678901234567890123
48 00 -------++++++++++++++++++++X++++++++++++++++++++----------------
49 01 ---+-+++++++++++++++++++X++++++++++++++++++---------------------
50 02 --------++++++++++++++++++++X+++++++++++++++++++----------------
51 03 --------+++++++++++++++++++X+++++++++++++++++++-----------------
52 04 --++++++++++++++++++++X+++++++++++++++++++----------------------
53 05 --++++++++++++++++++++X+++++++++++++++++++----------------------
54 06 ---+++++++++++++++++++X+++++++++++++++++++----------------------
55 07 ------+++++++++++++++++++X+++++++++++++++++++-------------------
56 08 ------+++++++++++++++++++X++++++++++++++++++--------------------
57 09 -------++++++++++++++++++X++++++++++++++++++--------------------
58 10 ----------++++++++++++++++++X+++++++++++++++++------------------
59 11 --------+++++++++++++++++++X++++++++++++++++++------------------
60 12 --++++++++++++++++++++X+++++++++++++++++++----------------------
61 13 ---+++++++++++++++++++X++++++++++++++++++-----------------------
62 14 ---+++++++++++++++++++X++++++++++++++++++-----------------------
63 15 -------++++++++++++++++++X+++++++++++++++++---------------------
64
65
66N W0
67
68 0000000000111111111122222222223333333333444444444455555555556666
69 0123456789012345678901234567890123456789012345678901234567890123
70 00 ----------+-+++++++++++++++++++X+++++++++++++++++++-------------
71 01 ---------++++++++++++++++++X+++++++++++++++++-------------------
72 02 -----------++++++++++++++++++++X++++++++++++++++++++------------
73 03 ----------++++++++++++++++++++X++++++++++++++++++++-------------
74 04 ------+++++++++++++++++++X++++++++++++++++++--------------------
75 05 ---+--+++++++++++++++++++X+++++++++++++++++++-------------------
76 06 ------++++++++++++++++++X+++++++++++++++++----------------------
77 07 --------+-+++++++++++++++++++X+++++++++++++++++++---------------
78 08 -------++++++++++++++++X++++++++++++++++------------------------
79 09 --------++++++++++++++++++X+++++++++++++++++--------------------
80 10 ---------+-++++++++++++++++X++++++++++++++++--------------------
81 11 --------++++++++++++++++++X+++++++++++++++++--------------------
82 12 -----+++++++++++++++++X+++++++++++++++++------------------------
83 13 ---+++++++++++++++++X++++++++++++++++---------------------------
84 14 ---+-++++++++++++++++X++++++++++++++++--------------------------
85 15 ---------+-++++++++++++++++X++++++++++++++++--------------------
86
87
88WRDQ W0
89
90 0000000000111111111122222222223333333333444444444455555555556666
91 0123456789012345678901234567890123456789012345678901234567890123
92 00 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
93 01 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
94 02 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
95 03 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
96 04 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
97 05 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
98 06 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
99 07 +++++++++++++++++X+++++++++++++++++------------+++++++++++++++++
100 08 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
101 09 ++++++++++++++++X++++++++++++++++-------------+-++++++++++++++++
102 10 +++++++++++++++++X++++++++++++++++-------------+++++++++++++++++
103 11 +++++++++++++++++X++++++++++++++++---------------+++++++++++++++
104 12 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
105 13 ++++++++++++++X++++++++++++++-----------------++++++++++++++++++
106 14 +++++++++++++++X+++++++++++++++----------------+++++++++++++++++
107 15 ++++++++++++++++X++++++++++++++++--------------+++++++++++++++++
108
109
110WRDM W0 00000010
111WRDM W0 0000000F
112
113
114ADDR
115
116 0000000000111111111122222222223333333333444444444455555555556666
117 0123456789012345678901234567890123456789012345678901234567890123
118 00 +++++++++++++++++++++++++++S+X++++++++++++++++++++++++++++++----
119
120CZ#@SG
121
122BCM97230B2 CFE v3.12 build 335, CFE core v3.28, Endian Mode: Little
123Build Date: Thu Apr 25 19:56:45 MSK 2013 (roman@ubuntu)
124Copyright (C) Broadcom Corporation.
125
126Hit any key to stop autoboot:
127MACRONIX SPI flash detected: Size = 8MB, Sector Size 4096, Page Size 256
128Enabling NAND flash at CS2.
129BCHP_NAND_FLASH_DEVICE_ID =0xecda1095, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x44ecda10
130Auto configuring NAND @ CS2, with ECC LEVEL=1 & SPARE_AREA_SIZE=16
131INFO: Configuring LEDs for PCB rev. 5
132CPU speed: 742MHz
133Total memory(0): 512MB
134DDR Freq: 800 MHz
135DDR Mode: DDR3
136DEV TECH: 2GBIT
137DDR Width: 16
138Boot Device: SPI
139Total flash: 8MB
140
141Initializing USB.
142USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
143Saving shmoo values...
144Saved shmoo values....
145
146CFE initialized.
147Trying to start splash screen...
148No valid image found in flash0.splash - disabling splash
149
150Executing STARTUP...
151Invalid command: "cls"
152Available commands: show_logo, gui, ts, erase, pvr, rvr, wvr, rr, wr, info, set, loop, reboot, dir, resetmac, macprog, macprog2, flash, memtest, t, f, e, d, u, uk, uc, batch, go, load, save, boot, ephycfg, ping, ifconfig, g, r, sleep, waitusb, show, testenv, incenv, unsetenv, printenv, setenv, help
153
154Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
155Loading: prog_seg: 0x80001000/7873536 bss: 0x80783400/140896 Entry address is 0x80451ff0
156Starting program at 0x80451ff0
157
158[ 0.000000] Linux version 3.3.8-3.3 (root@runner-pa8yaqg3-project-122-concurrent-0) (gcc version 4.9.4 (GCC) ) #1 SMP Thu Jul 23 16:25:51 UTC 2020
159[ 0.000000] Fetching vars from bootloader...
160[ 0.000000] Serial number is "31D00885F64133101594"
161[ 0.000000] Replacing flash type from NAND to SPI
162[ 0.000000] found 16 vars.
163[ 0.000000] Options: moca=0 sata=1 pcie=0 usb=1
164[ 0.000000] Using 512 MB + 0 MB RAM (from CFE)
165[ 0.000000] bootconsole [early0] enabled
166[ 0.000000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
167[ 0.000000] FPU revision is: 00130001
168[ 0.000000] Determined physical RAM map:
169[ 0.000000] memory: 10000000 @ 00000000 (usable)
170[ 0.000000] memory: 10000000 @ 20000000 (usable)
171[ 0.000000] bmem: adding 160 MB RESERVED region at 64 MB (0x0a000000@0x04000000)
172[ 0.000000] bmem: adding 224 MB RESERVED region at 512 MB (0x0e000000@0x20000000)
173[ 0.000000] Initrd not found or empty - disabling initrd
174[ 0.000000] Zone PFN ranges:
175[ 0.000000] Normal 0x00000000 -> 0x00030000
176[ 0.000000] Movable zone start PFN for each node
177[ 0.000000] Early memory PFN ranges
178[ 0.000000] 0: 0x00000000 -> 0x00010000
179[ 0.000000] 0: 0x00020000 -> 0x00030000
180[ 0.000000] PERCPU: Embedded 7 pages/cpu @81606000 s5120 r8192 d15360 u32768
181[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
182[ 0.000000] Kernel command line: bmem=160M@64M bmem=224M@512M nandcs=2 panic=5
183[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
184[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
185[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
186[ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
187[ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
188[ 0.000000] Memory: 116612k/524288k available (4513k kernel code, 407676k reserved, 1180k data, 1996k init, 0k highmem)
189[ 0.000000] Hierarchical RCU implementation.
190[ 0.000000] NR_IRQS:160
191[ 0.000000] Measuring MIPS counter frequency...
192[ 0.000000] Detected MIPS clock frequency: 742 MHz (371.255 MHz counter)
193[ 0.000000] Console: colour dummy device 80x25
194[ 0.001000] Calibrating delay loop... 741.37 BogoMIPS (lpj=370688)
195[ 0.012000] pid_max: default: 32768 minimum: 301
196[ 0.013000] Mount-cache hash table entries: 512
197[ 0.015000] SMP: Booting CPU1...
198[ 0.020000] CPU revision is: 0002a064 (Broadcom BMIPS4380)
199[ 0.020000] FPU revision is: 00130001
200[ 0.020000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
201[ 0.020000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
202[ 0.029000] SMP: CPU1 is running
203[ 0.029000] Brought up 2 CPUs
204[ 0.033000] NET: Registered protocol family 16
205[ 0.035000] USB0: power enable is active high; overcurrent is active low
206[ 0.036000] USB1: power enable is active high; overcurrent is active low
207[ 0.053000] bio: create slab <bio-0> at 0
208[ 0.055000] SCSI subsystem initialized
209[ 0.056000] usbcore: registered new interface driver usbfs
210[ 0.057000] usbcore: registered new interface driver hub
211[ 0.058000] usbcore: registered new device driver usb
212[ 0.060000] cfg80211: Calling CRDA to update world regulatory domain
213[ 0.061000] Switching to clocksource wktmr
214[ 0.077000] NET: Registered protocol family 2
215[ 0.081000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
216[ 0.088000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
217[ 0.096000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
218[ 0.103000] TCP: Hash tables configured (established 16384 bind 16384)
219[ 0.109000] TCP reno registered
220[ 0.112000] UDP hash table entries: 256 (order: 1, 8192 bytes)
221[ 0.118000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
222[ 0.125000] NET: Registered protocol family 1
223[ 0.129000] RPC: Registered named UNIX socket transport module.
224[ 0.135000] RPC: Registered udp transport module.
225[ 0.140000] RPC: Registered tcp transport module.
226[ 0.144000] RPC: Registered tcp NFSv4.1 backchannel transport module.
227[ 0.169000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
228[ 0.175000] NTFS driver 2.1.30 [Flags: R/O].
229[ 0.179000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
230[ 0.186000] fuse init (API version 7.18)
231[ 0.189000] fuse init DCACHE_BUG workaround enabled
232[ 0.195000] msgmni has been set to 227
233[ 0.207000] io scheduler noop registered
234[ 0.211000] io scheduler cfq registered (default)
235[ 0.216000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
236[ 0.223000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
237[ 0.230000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
238[ 0.244000] console [ttyS2] enabled, bootconsole disabled 67) is a 16550A
239[ 0.244000] console [ttyS2] enabled, bootconsole disabled
240[ 0.265000] brd: module loaded
241[ 0.274000] loop: module loaded
242[ 0.278000] ahci: SSS flag set, parallel bus scan disabled
243[ 0.294000] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
244[ 0.302000] ahci strict-ahci.0: flags: sntf stag clo slum part
245[ 0.313000] scsi0 : ahci_platform
246[ 0.317000] scsi1 : ahci_platform
247[ 0.321000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
248[ 0.329000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
249[ 0.339000] brcmstb_nand: NAND controller driver is loaded
250[ 0.347000] All hardware filters disabled
251[ 0.451000] bcmgenet: configuring instance #0 for internal PHY
252[ 0.477000] bcmgenet bcmgenet.0: eth0: link down
253[ 0.484000] All hardware filters disabled
254[ 0.642000] ata1: SATA link down (SStatus 0 SControl 300)
255[ 0.808000] No PHY detected, not registering interface:1
256[ 0.813000] bcmgenet: probe of bcmgenet.1 failed with error -5
257[ 0.819000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
258[ 0.827000] usbcore: registered new interface driver pegasus
259[ 0.833000] usbcore: registered new interface driver asix
260[ 0.838000] usbcore: registered new interface driver cdc_ether
261[ 0.844000] usbcore: registered new interface driver net1080
262[ 0.850000] usbcore: registered new interface driver cdc_subset
263[ 0.856000] usbcore: registered new interface driver zaurus
264[ 0.862000] usbcore: registered new interface driver cdc_ncm
265[ 0.868000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
266[ 0.875000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
267[ 0.880000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
268[ 0.919000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
269[ 0.930000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
270[ 0.936000] hub 1-0:1.0: USB hub found
271[ 0.940000] hub 1-0:1.0: 1 port detected
272[ 0.944000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
273[ 0.949000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
274[ 0.952000] ata2: SATA link down (SStatus 0 SControl 300)
275[ 0.994000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
276[ 1.005000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
277[ 1.011000] hub 2-0:1.0: USB hub found
278[ 1.015000] hub 2-0:1.0: 1 port detected
279[ 1.019000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
280[ 1.026000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
281[ 1.031000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
282[ 1.039000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
283[ 1.109000] hub 3-0:1.0: USB hub found
284[ 1.113000] hub 3-0:1.0: 1 port detected
285[ 1.118000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
286[ 1.123000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
287[ 1.130000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
288[ 1.201000] hub 4-0:1.0: USB hub found
289[ 1.205000] hub 4-0:1.0: 1 port detected
290[ 1.210000] Initializing USB Mass Storage driver...
291[ 1.215000] usbcore: registered new interface driver usb-storage
292[ 1.221000] USB Mass Storage support registered.
293[ 1.226000] mousedev: PS/2 mouse device common for all mice
294[ 1.232000] lirc_dev: IR Remote Control driver registered, major 253
295[ 1.238000] IR LIRC bridge handler initialized
296[ 1.243000] sdhci: Secure Digital Host Controller Interface driver
297[ 1.249000] sdhci: Copyright(c) Pierre Ossman
298[ 1.253000] sdhci-pltfm: SDHCI platform and OF driver helper
299[ 1.259000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
300[ 1.268000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
301[ 1.276000] usbcore: registered new interface driver usbhid
302[ 1.282000] usbhid: USB HID core driver
303[ 1.286000] TCP cubic registered
304[ 1.289000] NET: Registered protocol family 17
305[ 1.294000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
306[ 1.302000] EBI CS0: setting up SPI flash (primary)
307[ 1.313000] spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
308[ 1.321000] m25p80 spi0.0: found mx25l6405d, expected m25p80
309[ 1.327000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
310[ 1.349000] Creating 8 MTD partitions on "spi0.0":
311[ 1.354000] 0x000000000000-0x000000100000 : "bootldr"
312[ 1.362000] 0x000000100000-0x000000110000 : "macadr"
313[ 1.368000] 0x000000110000-0x000000120000 : "nvram"
314[ 1.375000] 0x000000120000-0x000000180000 : "branding"
315[ 1.386000] 0x000000180000-0x000000200000 : "splash"
316[ 1.395000] 0x000000200000-0x000000600000 : "ro_kernel"
317[ 1.402000] 0x000000600000-0x000000610000 : "env"
318[ 1.427000] 0x000000610000-0x000000800000 : "bsec"
319[ 1.435000] EBI CS2: setting up NAND flash
320[ 1.440000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
321[ 1.449000] brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
322[ 1.449000]
323[ 1.459000] Bad block table found at page 131008, version 0x01
324[ 1.466000] Bad block table found at page 130944, version 0x01
325[ 1.500000] Creating 3 MTD partitions on "brcmnand.0":
326[ 1.505000] 0x000000000000-0x000000800000 : "kernel"
327[ 1.511000] 0x000000800000-0x000001000000 : "backup_kernel"
328[ 1.520000] 0x000001000000-0x000010000000 : "raw"
329
330[ 1.531000] Freeing unused kernel memory: 1996k freed
331[ 1.714000] brcmfb: addr = 0xac800000 offset = 0x0
332[ 1.722000] fb0: Broadcom frame buffer device
333Try to attach UBI ...
334[ 1.765000] UBI: attaching mtd10 to ubi0
335[ 1.769000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
336[ 1.776000] UBI: logical eraseblock size: 126976 bytes
337[ 1.781000] UBI: smallest flash I/O unit: 2048
338[ 1.786000] UBI: VID header offset: 2048 (aligned 2048)
339[ 1.792000] UBI: data offset: 4096
340
341(none) login: [ 3.276000] UBI: max. sequence number: 39454
342[ 3.303000] UBI: attached mtd10 to ubi0
343[ 3.307000] UBI: MTD device name: "raw"
344[ 3.312000] UBI: MTD device size: 240 MiB
345[ 3.317000] UBI: number of good PEBs: 1916
346[ 3.322000] UBI: number of bad PEBs: 4
347[ 3.326000] UBI: number of corrupted PEBs: 0
348[ 3.331000] UBI: max. allowed volumes: 128
349[ 3.335000] UBI: wear-leveling threshold: 4096
350[ 3.340000] UBI: number of internal volumes: 1
351[ 3.345000] UBI: number of user volumes: 2
352[ 3.349000] UBI: available PEBs: 42
353[ 3.354000] UBI: total number of reserved PEBs: 1874
354[ 3.359000] UBI: number of PEBs reserved for bad PEB handling: 19
355[ 3.365000] UBI: max/mean erase counter: 26/20
356[ 3.369000] UBI: image sequence number: 1320996868
357[ 3.374000] UBI: background thread "ubi_bgt0d" started, PID 513
358UBI was attached.
359[ 3.475000] UBIFS: recovery needed
360[ 3.595000] UBIFS: recovery completed
361[ 3.598000] UBIFS: mounted UBI device 0, volume 1, name "persistentfs"
362[ 3.605000] UBIFS: file system size: 133070848 bytes (129952 KiB, 126 MiB, 1048 LEBs)
363[ 3.613000] UBIFS: journal size: 6602752 bytes (6448 KiB, 6 MiB, 52 LEBs)
364[ 3.620000] UBIFS: media format: w4/r0 (latest is w4/r0)
365[ 3.626000] UBIFS: default compressor: lzo
366[ 3.630000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
367Mount rootfs: squashfs from /dev/mtdblock11 to /mnt
368rootfs /dev/mtdblock11 mount successful
369Fastboot disabled
370Framebuffer custom resolution 0x0 incorrect
371Current framebuffer size is 720x576
372Sun Jan 1 01:01:00 UTC 2017
373deviceinfo:
374mac addr : E4:27:71:41:32:00
375serial num: 31D00885F64133101594
376board name: SML-482
377hw rev : 0
378features : cvbs hdmi spdif
379board : sml723x
380family : bcm97230
381S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
382Setup networking...
383Initial network configuration:
3841: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
385 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
386 inet 127.0.0.1/8 scope host lo
3872: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
388 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
389Waiting for network configuration from DHCP server...
390udhcpc: started, v1.29.0.git
391Remove address on eth0
392udhcpc: sending discover
393[ 5.546000] bcmgenet bcmgenet.0: eth0: link up, 100 Mbps, full duplex
394udhcpc: sending discover
395udhcpc: sending select for 192.168.0.143
396udhcpc: lease of 192.168.0.143 obtained, lease time 86400
397Get follow parameters from server:
398interface: eth0
399address: 192.168.0.143
400netmask: 255.255.255.0
401broadcast: 192.168.0.255
402Setting IP address 192.168.0.143 on eth0
403router: 192.168.0.1
404Deleting default router
405Add default router via 192.168.0.1
406Recreating
407domain: Dlink
408nameserver: 192.168.0.1
409 Adding DNS server 192.168.0.1
410ntpserver: time.svc.iptv.rt.ru 0.ru.pool.ntp.org 1.ru.pool.ntp.org ntp1.vniiftri.ru ntp2.vniiftri.ru
411New network configuration:
4121: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
413 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
414 inet 127.0.0.1/8 scope host lo
4152: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
416 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
417 inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
418Wait for USB devices...
419No USB storages found.
420S/N:31D00885F64133101594 MAC:E4:27:71:41:32:00 FW:7.18.38
421Searching new firmware...
422download.c(3540) [ 0 s]: Command line arguments values:
423download.c(3542) [ 0 s]: - vendor: SmartLabs
424download.c(3544) [ 0 s]: - device: sml723x
425download.c(3546) [ 0 s]: - hw revision: 0
426download.c(3548) [ 0 s]: - version: 7.18.38
427download.c(3554) [ 0 s]: - force write backup kernel
428download.c(3563) [ 0 s]: - certificates dir: /etc/ssl
429download.c(3565) [ 0 s]: - timeout per retry: 25
430download.c(3567) [ 0 s]: - max retries: 2
431download.c(3575) [ 0 s]: - flash timeout: 30 seconds
432source_http.c(0524) [ 0 s]: Not a direct firmware URL http://upgrade.svc.iptv.rt.ru/firmware/http/sml723x/
433source_http.c(0182) [ 0 s]: Downloading http://upgrade.svc.iptv.rt.ru/firmware/http/sml723x/check_version_ext?output=text&board=sml723x&mac=E4%3A27%3A71%3A41%3A32%3A00&serial=31D00885F64133101594¤t_firmware_version=7%2E18%2E38 (timeout: 25)...
434source_norm.c(1085) [ 0 s]: NORM 239.83.77.78:9999 timeout 25 repeats 1
435source_norm.c(0216) [ 0 s]: Multicast port: 9999
436source_norm.c(0227) [ 0 s]: Multicast address: 239.83.77.78
437source_norm.c(0245) [ 0 s]: Joining IGMP group 239.83.77.78 ...
438source_norm.c(0261) [ 0 s]: Socket connection to 239.83.77.78:9999 has been established
439source_norm.c(0161) [ 0 s]: Loading: *
440source_http.c(0326) [ 0 s]: wget exited status=0
441source_http.c(0182) [ 0 s]: Downloading http://upgrade.svc.iptv.rt.ru/firmware/http/sml723x_wink.bin (timeout: 25)...
442source_http.c(0249) [ 0 s]: Download buffer full, terminating wget process ...
443source_http.c(0329) [ 0 s]: wget killed signal=15, with_core=0
444source_norm.c(1122) [ 1 s]: No incoming data for 1 second(s)
445source_norm.c(1122) [ 2 s]: No incoming data for 2 second(s)
446source_norm.c(1122) [ 3 s]: No incoming data for 3 second(s)
447source_norm.c(1122) [ 4 s]: No incoming data for 4 second(s)
448source_norm.c(1122) [ 5 s]: No incoming data for 5 second(s)
449source_norm.c(1122) [ 6 s]: No incoming data for 6 second(s)
450source_norm.c(1122) [ 7 s]: No incoming data for 7 second(s)
451source_norm.c(1122) [ 8 s]: No incoming data for 8 second(s)
452source_norm.c(1122) [ 9 s]: No incoming data for 9 second(s)
453source_norm.c(1122) [ 10 s]: No incoming data for 10 second(s)
454source_norm.c(1122) [ 11 s]: No incoming data for 11 second(s)
455source_norm.c(1122) [ 12 s]: No incoming data for 12 second(s)
456source_norm.c(1122) [ 13 s]: No incoming data for 13 second(s)
457source_norm.c(1122) [ 14 s]: No incoming data for 14 second(s)
458source_norm.c(1122) [ 15 s]: No incoming data for 15 second(s)
459source_norm.c(1122) [ 16 s]: No incoming data for 16 second(s)
460source_norm.c(1122) [ 17 s]: No incoming data for 17 second(s)
461source_norm.c(1122) [ 18 s]: No incoming data for 18 second(s)
462source_norm.c(1122) [ 19 s]: No incoming data for 19 second(s)
463source_norm.c(1122) [ 20 s]: No incoming data for 20 second(s)
464source_norm.c(1122) [ 21 s]: No incoming data for 21 second(s)
465source_norm.c(1122) [ 22 s]: No incoming data for 22 second(s)
466source_norm.c(1122) [ 23 s]: No incoming data for 23 second(s)
467source_norm.c(1122) [ 24 s]: No incoming data for 24 second(s)
468source_norm.c(1122) [ 25 s]: No incoming data for 25 second(s)
469source_norm.c(1141) [ 25 s]: Retry count exceeded. Aborting NORM download
470download.c(1757) [ 25 s]: Callback failed with code 100
471download.c(3643) [ 25 s]: Firmware candidates:
472download.c(3653) [ 25 s]: - 7.18.38 (hw rev. 5) : http://upgrade.svc.iptv.rt.ru/firmware/http/sml723x_wink.bin
473download.c(3728) [ 25 s]: Best URL: http://upgrade.svc.iptv.rt.ru/firmware/http/sml723x_wink.bin
474download.c(3733) [ 25 s]: The same or older version !!!
475download.c(0782) [ 25 s]: -1% Device already has same or newer version of firmware
476Download error code: 204
477Remove address on eth0
478Start STB application.
479The system is going down NOW!
480Sent SIGTERM to all processes
481Sent SIGKILL to all processes
482vm.min_free_kbytes = 8192
483vm.overcommit_memory = 1
484net.ipv4.conf.all.force_igmp_version = 2
485Starting syslogd ...
486
487SML-482 login: [ 39.420000] nexus: module license 'Proprietary' taints kernel.
488[ 39.426000] Disabling lock debugging due to kernel taint
489[ 39.541000] nexus driver initialized
490[ 41.619000] RTL871X: module init start
491[ 41.623000] RTL871X: rtl8188eu v4.3.0.8_13968.20150417
492[ 41.628000] RTL871X: build time: Jul 23 2020 16:07:06
493[ 41.638000] usbcore: registered new interface driver rtl8188eu
494[ 41.644000] RTL871X: module init ret=0
495[ 42.078000] usbcore: registered new interface driver rtl8192eu
496[ 42.203000] rtw driver version=v2.0.939.20100726
497[ 42.211000] usbcore: registered new interface driver rtw_usb_drv
498[ 42.424000] rtusb init rt2870 --->
499[ 42.428000] usbcore: registered new interface driver rt2870
5001: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
501 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
502 inet 127.0.0.1/8 scope host lo
5032: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
504 link/ether e4:27:71:41:32:00 brd ff:ff:ff:ff:ff:ff
505 inet 192.168.0.143/24 brd 192.168.0.255 scope global eth0
506[ 48.100000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1722
507[ 48.113000] !!!Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/display/src/nexus_display.c:1723
508[ 72.099000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/../magnum/portinginterface/hdm/src/common/bhdm_debug.c:86
509[ 76.994000] ### Error at /builds/stb/stb-firmware/_dependencies/broadcom-sdk/refsw_sml723x/nexus/modules/graphics2d/src/nexus_graphics2d.c:1612