· 6 years ago · Dec 06, 2019, 05:32 PM
1MediaPC:~ # dmesg
2[ 0.652634] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
3[ 0.652784] pci 0000:00:1c.0: PCI bridge to [bus 04]
4[ 0.652793] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
5[ 0.652892] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
6[ 0.652925] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
7[ 0.652956] pci 0000:03:00.0: reg 0x18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
8[ 0.652976] pci 0000:03:00.0: reg 0x20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref]
9[ 0.653086] pci 0000:03:00.0: supports D1 D2
10[ 0.653090] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
11[ 0.653261] pci 0000:00:1c.1: PCI bridge to [bus 03]
12[ 0.653268] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
13[ 0.653278] pci 0000:00:1c.1: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
14[ 0.653366] pci 0000:02:00.0: [10de:0a64] type 00 class 0x030000
15[ 0.653399] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
16[ 0.653418] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
17[ 0.653436] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
18[ 0.653449] pci 0000:02:00.0: reg 0x24: [io 0xdc00-0xdc7f]
19[ 0.653463] pci 0000:02:00.0: reg 0x30: [mem 0xfbe00000-0xfbe7ffff pref]
20[ 0.653474] pci 0000:02:00.0: enabling Extended Tags
21[ 0.653578] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.3 (capable of 64.000 Gb/s with 5 GT/s x16 link)
22[ 0.653688] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
23[ 0.653716] pci 0000:02:00.1: reg 0x10: [mem 0xfbef8000-0xfbefbfff]
24[ 0.653782] pci 0000:02:00.1: enabling Extended Tags
25[ 0.653981] pci 0000:00:1c.3: ASPM: current common clock configuration is broken, reconfiguring
26[ 0.662190] pci 0000:00:1c.3: PCI bridge to [bus 02]
27[ 0.662197] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
28[ 0.662204] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbefffff]
29[ 0.662212] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
30[ 0.662239] pci_bus 0000:01: extended config space not accessible
31[ 0.662325] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
32[ 0.662339] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
33[ 0.662343] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
34[ 0.662348] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
35[ 0.662352] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
36[ 0.662357] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
37[ 0.662361] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
38[ 0.664231] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
39[ 0.664421] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
40[ 0.664607] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
41[ 0.664792] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
42[ 0.664978] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15)
43[ 0.665163] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 10 11 12 14 15)
44[ 0.665348] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 *14 15)
45[ 0.665554] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 *15)
46[ 0.665923] pci 0000:02:00.0: vgaarb: setting as boot VGA device
47[ 0.665923] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
48[ 0.665923] pci 0000:02:00.0: vgaarb: bridge control possible
49[ 0.665923] vgaarb: loaded
50[ 0.665923] SCSI subsystem initialized
51[ 0.665923] libata version 3.00 loaded.
52[ 0.665923] ACPI: bus type USB registered
53[ 0.665923] usbcore: registered new interface driver usbfs
54[ 0.665923] usbcore: registered new interface driver hub
55[ 0.665923] usbcore: registered new device driver usb
56[ 0.665923] pps_core: LinuxPPS API ver. 1 registered
57[ 0.665923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
58[ 0.665923] PTP clock support registered
59[ 0.666008] Advanced Linux Sound Architecture Driver Initialized.
60[ 0.666011] PCI: Using ACPI for IRQ routing
61[ 0.673014] PCI: pci_cache_line_size set to 64 bytes
62[ 0.673080] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
63[ 0.673084] e820: reserve RAM buffer [mem 0x7ffa0000-0x7fffffff]
64[ 0.673760] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
65[ 0.673826] clocksource: Switched to clocksource tsc-early
66[ 0.723781] FS-Cache: Loaded
67[ 0.723850] pnp: PnP ACPI init
68[ 0.724030] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
69[ 0.724036] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
70[ 0.724054] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
71[ 0.724219] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
72[ 0.724769] system 00:02: [io 0x0a00-0x0a0f] has been reserved
73[ 0.724775] system 00:02: [io 0x0290-0x029f] has been reserved
74[ 0.724780] system 00:02: [io 0x0a20-0x0a2f] has been reserved
75[ 0.724785] system 00:02: [io 0x0a30-0x0a3f] has been reserved
76[ 0.724801] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
77[ 0.725241] system 00:03: [io 0x04d0-0x04d1] has been reserved
78[ 0.725252] system 00:03: [io 0x0800-0x087f] has been reserved
79[ 0.725257] system 00:03: [io 0x0480-0x04bf] has been reserved
80[ 0.725263] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
81[ 0.725268] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
82[ 0.725284] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
83[ 0.725743] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
84[ 0.725750] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
85[ 0.725765] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
86[ 0.726474] pnp 00:05: Plug and Play ACPI device, IDs ITE8713 (disabled)
87[ 0.726795] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
88[ 0.726812] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
89[ 0.727337] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
90[ 0.727344] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
91[ 0.727349] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
92[ 0.727354] system 00:07: [mem 0x00100000-0x7fffffff] could not be reserved
93[ 0.727360] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
94[ 0.727375] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
95[ 0.727771] pnp: PnP ACPI: found 8 devices
96[ 0.737331] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
97[ 0.737389] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
98[ 0.737397] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
99[ 0.737411] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
100[ 0.737453] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
101[ 0.737460] pci 0000:00:1c.1: BAR 8: assigned [mem 0x80200000-0x805fffff]
102[ 0.737467] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
103[ 0.737475] pci 0000:00:1c.0: PCI bridge to [bus 04]
104[ 0.737481] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
105[ 0.737488] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
106[ 0.737494] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
107[ 0.737502] pci 0000:00:1c.1: PCI bridge to [bus 03]
108[ 0.737507] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
109[ 0.737513] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x805fffff]
110[ 0.737519] pci 0000:00:1c.1: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
111[ 0.737528] pci 0000:00:1c.3: PCI bridge to [bus 02]
112[ 0.737532] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
113[ 0.737539] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbefffff]
114[ 0.737545] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
115[ 0.737553] pci 0000:00:1e.0: PCI bridge to [bus 01]
116[ 0.737568] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
117[ 0.737572] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
118[ 0.737576] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
119[ 0.737580] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
120[ 0.737585] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
121[ 0.737589] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
122[ 0.737593] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
123[ 0.737598] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
124[ 0.737602] pci_bus 0000:04: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
125[ 0.737606] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
126[ 0.737610] pci_bus 0000:03: resource 1 [mem 0x80200000-0x805fffff]
127[ 0.737615] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
128[ 0.737619] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
129[ 0.737623] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbefffff]
130[ 0.737627] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
131[ 0.737632] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
132[ 0.737636] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
133[ 0.737641] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
134[ 0.737645] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
135[ 0.737649] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff window]
136[ 0.737653] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff window]
137[ 0.737853] NET: Registered protocol family 2
138[ 0.738180] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
139[ 0.738215] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
140[ 0.738336] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
141[ 0.738475] TCP: Hash tables configured (established 16384 bind 16384)
142[ 0.738620] UDP hash table entries: 1024 (order: 3, 32768 bytes)
143[ 0.738661] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
144[ 0.738845] NET: Registered protocol family 1
145[ 0.739260] RPC: Registered named UNIX socket transport module.
146[ 0.739264] RPC: Registered udp transport module.
147[ 0.739266] RPC: Registered tcp transport module.
148[ 0.739268] RPC: Registered tcp NFSv4.1 backchannel transport module.
149[ 0.740888] pci 0000:00:1c.0: enabling device (0106 -> 0107)
150[ 0.741227] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
151[ 0.741256] pci 0000:02:00.1: Linked as a consumer to 0000:02:00.0
152[ 0.741273] PCI: CLS 32 bytes, default 64
153[ 0.836346] Scanning for low memory corruption every 60 seconds
154[ 0.837656] Initialise system trusted keyrings
155[ 0.837796] workingset: timestamp_bits=40 max_order=19 bucket_order=0
156[ 0.843675] squashfs: version 4.0 (2009/01/31) Phillip Lougher
157[ 0.843810] FS-Cache: Netfs 'nfs' registered for caching
158[ 0.844292] NFS: Registering the id_resolver key type
159[ 0.844309] Key type id_resolver registered
160[ 0.844311] Key type id_legacy registered
161[ 0.844319] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
162[ 0.844607] FS-Cache: Netfs 'cifs' registered for caching
163[ 1.855518] tsc: Refined TSC clocksource calibration: 1795.499 MHz
164[ 1.855535] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e18da41a2, max_idle_ns: 440795250832 ns
165[ 1.855891] clocksource: Switched to clocksource tsc
166[ 2.958500] Key type asymmetric registered
167[ 2.958506] Asymmetric key parser 'x509' registered
168[ 2.958544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
169[ 2.958549] io scheduler noop registered
170[ 2.958660] io scheduler cfq registered (default)
171[ 2.958664] io scheduler mq-deadline registered
172[ 2.958666] io scheduler kyber registered
173[ 2.958807] io scheduler bfq registered
174[ 2.959776] intel_idle: MWAIT substates: 0x10
175[ 2.959780] intel_idle: v0.4.1 model 0x1C
176[ 2.960081] intel_idle: lapic_timer_reliable_states 0x2
177[ 2.960232] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
178[ 2.960261] ACPI: Power Button [PWRB]
179[ 2.960382] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
180[ 2.960435] ACPI: Power Button [PWRF]
181[ 2.961464] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
182[ 2.962641] Linux agpgart interface v0.103
183[ 2.962927] [drm] radeon kernel modesetting enabled.
184[ 2.963151] [drm] amdgpu kernel modesetting enabled.
185[ 2.969705] brd: module loaded
186[ 2.969787] loop: module loaded
187[ 2.980808] usbcore: registered new interface driver rtsx_usb
188[ 2.980925] Loading iSCSI transport class v2.0-870.
189[ 2.981263] iscsi: registered transport (tcp)
190[ 2.981267] megasas: 07.706.03.00-rc1
191[ 2.981970] ahci 0000:00:1f.2: version 3.0
192[ 2.982388] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
193[ 2.982396] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
194[ 2.983657] scsi host0: ahci
195[ 2.984044] scsi host1: ahci
196[ 2.984320] scsi host2: ahci
197[ 2.984597] scsi host3: ahci
198[ 2.984718] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 24
199[ 2.984723] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 24
200[ 2.984726] ata3: DUMMY
201[ 2.984728] ata4: DUMMY
202[ 2.986142] tun: Universal TUN/TAP device driver, 1.6
203[ 2.986325] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
204[ 2.986391] Atheros(R) L2 Ethernet Driver - version 2.2.3
205[ 2.986393] Copyright (c) 2007 Atheros Corporation.
206[ 2.986587] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
207[ 2.986747] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
208[ 2.986785] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
209[ 2.986788] e100: Copyright(c) 1999-2006 Intel Corporation
210[ 2.986832] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
211[ 2.986835] e1000: Copyright (c) 1999-2006 Intel Corporation.
212[ 2.986878] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
213[ 2.986881] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
214[ 2.986924] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
215[ 2.986927] igb: Copyright (c) 2007-2014 Intel Corporation.
216[ 2.986965] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
217[ 2.986967] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
218[ 2.987120] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
219[ 2.987122] ixgb: Copyright (c) 1999-2008 Intel Corporation.
220[ 2.987158] ice: Intel(R) Ethernet Connection E800 Series Linux Driver - version ice-0.7.0-k
221[ 2.987160] ice: Copyright (c) 2018, Intel Corporation.
222[ 2.987294] jme: JMicron JMC2XX ethernet driver version 1.0.8
223[ 2.987368] sky2: driver version 1.30
224[ 2.987568] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
225[ 2.988590] libphy: r8169: probed
226[ 2.989261] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:ae:c5:34:a3:a8, XID 2c200000, IRQ 25
227[ 2.989266] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
228[ 2.989536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
229[ 2.989554] ehci-pci: EHCI PCI platform driver
230[ 2.989845] ehci-pci 0000:00:1d.7: EHCI Host Controller
231[ 2.989864] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
232[ 2.989886] ehci-pci 0000:00:1d.7: debug port 1
233[ 2.993803] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
234[ 2.993857] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
235[ 3.005508] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
236[ 3.005996] hub 1-0:1.0: USB hub found
237[ 3.006018] hub 1-0:1.0: 8 ports detected
238[ 3.006760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
239[ 3.006774] ohci-pci: OHCI PCI platform driver
240[ 3.006816] uhci_hcd: USB Universal Host Controller Interface driver
241[ 3.007042] uhci_hcd 0000:00:1d.0: UHCI Host Controller
242[ 3.007060] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
243[ 3.007075] uhci_hcd 0000:00:1d.0: detected 2 ports
244[ 3.007105] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b880
245[ 3.007574] hub 2-0:1.0: USB hub found
246[ 3.007596] hub 2-0:1.0: 2 ports detected
247[ 3.008097] uhci_hcd 0000:00:1d.1: UHCI Host Controller
248[ 3.008112] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
249[ 3.008125] uhci_hcd 0000:00:1d.1: detected 2 ports
250[ 3.008178] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bc00
251[ 3.008624] hub 3-0:1.0: USB hub found
252[ 3.008646] hub 3-0:1.0: 2 ports detected
253[ 3.009199] uhci_hcd 0000:00:1d.2: UHCI Host Controller
254[ 3.009220] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
255[ 3.009234] uhci_hcd 0000:00:1d.2: detected 2 ports
256[ 3.009279] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
257[ 3.009749] hub 4-0:1.0: USB hub found
258[ 3.009771] hub 4-0:1.0: 2 ports detected
259[ 3.010271] uhci_hcd 0000:00:1d.3: UHCI Host Controller
260[ 3.010287] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
261[ 3.010300] uhci_hcd 0000:00:1d.3: detected 2 ports
262[ 3.010351] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000c080
263[ 3.010803] hub 5-0:1.0: USB hub found
264[ 3.010825] hub 5-0:1.0: 2 ports detected
265[ 3.011342] xhci_hcd 0000:04:00.0: xHCI Host Controller
266[ 3.011360] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
267[ 3.011514] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
268[ 3.012437] hub 6-0:1.0: USB hub found
269[ 3.012464] hub 6-0:1.0: 2 ports detected
270[ 3.012785] xhci_hcd 0000:04:00.0: xHCI Host Controller
271[ 3.012797] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
272[ 3.012808] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
273[ 3.014899] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
274[ 3.015260] hub 7-0:1.0: USB hub found
275[ 3.015288] hub 7-0:1.0: 2 ports detected
276[ 3.015708] usbcore: registered new interface driver uas
277[ 3.015800] usbcore: registered new interface driver usb-storage
278[ 3.015875] i8042: PNP: No PS/2 controller found.
279[ 3.015877] i8042: Probing ports directly.
280[ 3.016361] serio: i8042 KBD port at 0x60,0x64 irq 1
281[ 3.016376] serio: i8042 AUX port at 0x60,0x64 irq 12
282[ 3.016648] mousedev: PS/2 mouse device common for all mice
283[ 3.017326] rtc_cmos 00:01: RTC can wake from S4
284[ 3.017559] rtc_cmos 00:01: registered as rtc0
285[ 3.017608] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
286[ 3.017649] i2c /dev entries driver
287[ 3.017886] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20180810/utaddress-213)
288[ 3.017901] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.SMRG) (20180810/utaddress-213)
289[ 3.017913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
290[ 3.018485] sdhci: Secure Digital Host Controller Interface driver
291[ 3.018488] sdhci: Copyright(c) Pierre Ossman
292[ 3.018633] sdhci-pltfm: SDHCI platform and OF driver helper
293[ 3.018639] No iBFT detected.
294[ 3.018669] hidraw: raw HID events driver (C) Jiri Kosina
295[ 3.019586] usbcore: registered new interface driver usbhid
296[ 3.019588] usbhid: USB HID core driver
297[ 3.020608] NET: Registered protocol family 10
298[ 3.021202] Segment Routing with IPv6
299[ 3.021249] NET: Registered protocol family 17
300[ 3.021292] Key type dns_resolver registered
301[ 3.021650] microcode: sig=0x106ca, pf=0x8, revision=0x107
302[ 3.021782] microcode: Microcode Update Driver: v2.2.
303[ 3.021818] sched_clock: Marking stable (3016196068, 5561432)->(3193841400, -172083900)
304[ 3.022353] Loading compiled-in X.509 certificates
305[ 3.023037] Btrfs loaded, crc32c=crc32c-generic
306[ 3.023861] console [netcon0] enabled
307[ 3.023864] netconsole: network logging started
308[ 3.023932] rtc_cmos 00:01: setting system clock to 2019-12-05 21:20:37 UTC (1575580837)
309[ 3.024261] p4_clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
310[ 3.024355] ALSA device list:
311[ 3.024357] No soundcards found.
312[ 3.296721] ata2: SATA link down (SStatus 0 SControl 300)
313[ 3.296962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
314[ 3.298666] ata1.00: ATA-8: WDC WD2500BEVT-80A23T0, 01.01A01, max UDMA/133
315[ 3.298709] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
316[ 3.300623] ata1.00: configured for UDMA/133
317[ 3.302943] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-8 1A01 PQ: 0 ANSI: 5
318[ 3.307729] sd 0:0:0:0: Attached scsi generic sg0 type 0
319[ 3.308062] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
320[ 3.308306] sd 0:0:0:0: [sda] Write Protect is off
321[ 3.308340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
322[ 3.308763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
323[ 3.349720] sda: sda1 sda2
324[ 3.350597] sd 0:0:0:0: [sda] Attached SCSI disk
325[ 3.362520] Freeing unused kernel image memory: 4820K
326[ 3.379090] Write protecting the kernel read-only data: 61440k
327[ 3.392486] Freeing unused kernel image memory: 2004K
328[ 3.393196] Freeing unused kernel image memory: 520K
329[ 3.393709] Run /init as init process
330[ 3.765959] usb 2-1: new full-speed USB device number 2 using uhci_hcd
331[ 4.229259] usb 1-5: new high-speed USB device number 3 using ehci-pci
332[ 4.390587] usb-storage 1-5:1.0: USB Mass Storage device detected
333[ 4.390952] scsi host4: usb-storage 1-5:1.0
334[ 4.512189] usb 1-6: new high-speed USB device number 4 using ehci-pci
335[ 4.665207] usb-storage 1-6:1.0: USB Mass Storage device detected
336[ 4.665819] scsi host5: usb-storage 1-6:1.0
337[ 4.735826] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
338[ 4.852053] uvesafb: NVIDIA Corporation, GT218 Board - 06930002, Chip Rev , OEM: NVIDIA, VBE v3.0
339[ 4.939102] uvesafb: VBIOS/hardware doesn't support DDC transfers
340[ 4.939124] uvesafb: no monitor limits have been set, default refresh rate will be used
341[ 4.940307] uvesafb: scrolling: redraw
342[ 5.018859] usb 5-1: new low-speed USB device number 2 using uhci_hcd
343[ 5.101166] Console: switching to colour frame buffer device 80x30
344[ 5.118322] uvesafb: framebuffer at 0xcf000000, mapped to 0x(____ptrval____), using 10240k, total 14336k
345[ 5.118344] uvesafb: fb0: VESA VGA frame buffer device
346[ 5.242267] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C31C.0001/input/input5
347[ 5.244202] random: fast init done
348[ 5.299779] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.3-1/input0
349[ 5.333791] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C31C.0002/input/input6
350[ 5.389112] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C31C.0002/input/input7
351[ 5.389317] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.3-1/input1
352[ 5.409824] scsi 4:0:0:0: Direct-Access Kingston DataTraveler II 1.13 PQ: 0 ANSI: 0 CCS
353[ 5.417560] sd 4:0:0:0: Attached scsi generic sg1 type 0
354[ 5.417721] sd 4:0:0:0: [sdb] 502784 512-byte logical blocks: (257 MB/246 MiB)
355[ 5.418798] sd 4:0:0:0: [sdb] Write Protect is off
356[ 5.418936] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
357[ 5.420479] sd 4:0:0:0: [sdb] No Caching mode page found
358[ 5.420500] sd 4:0:0:0: [sdb] Assuming drive cache: write through
359[ 5.427376] sdb: sdb1
360[ 5.431804] sd 4:0:0:0: [sdb] Attached SCSI removable disk
361[ 5.542497] usb 1-8: new high-speed USB device number 6 using ehci-pci
362[ 5.671072] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0206 PQ: 0 ANSI: 0
363[ 5.672592] sd 5:0:0:0: Attached scsi generic sg2 type 0
364[ 5.680315] sd 5:0:0:0: [sdc] Attached SCSI removable disk
365[ 5.695931] usb-storage 1-8:1.0: USB Mass Storage device detected
366[ 5.696733] scsi host6: usb-storage 1-8:1.0
367[ 5.832720] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
368[ 6.711349] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GA10N AT04 PQ: 0 ANSI: 0
369[ 6.717958] sr 6:0:0:0: [sr0] scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
370[ 6.717964] cdrom: Uniform CD-ROM driver Revision: 3.20
371[ 6.718569] sr 6:0:0:0: Attached scsi CD-ROM sr0
372[ 6.719015] sr 6:0:0:0: Attached scsi generic sg3 type 5
373[ 9.283217] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
374[ 9.299962] systemd[1]: Detected architecture x86-64.
375[ 9.361827] systemd[1]: Set hostname to <LibreELEC>.
376[ 9.380343] random: crng init done
377[ 9.513805] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
378[ 9.518929] systemd[1]: Starting Show Version...
379[ 9.519262] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
380[ 9.520192] systemd[1]: Listening on Journal Socket.
381[ 9.522881] systemd[1]: Mounting POSIX Message Queue File System...
382[ 9.526326] systemd[1]: Mounting Variable Directory...
383[ 9.527588] systemd[1]: Listening on udev Kernel Socket.
384[ 9.659289] kernel-overlays-setup: setup base modules
385[ 9.739692] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.36
386[ 9.788297] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
387[ 9.788460] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
388[ 9.846975] kernel-overlays-setup: done
389[ 10.170528] systemd-journald[225]: Received request to flush runtime journal from PID 1
390[ 13.338949] ite-cir 00:05: [io 0x02f8-0x02ff]
391[ 13.339124] ite-cir 00:05: [irq 11]
392[ 13.373617] ite-cir 00:05: activated
393[ 13.373640] ite_cir: Auto-detected model: ITE8713 CIR transceiver
394[ 13.373643] ite_cir: Using model: ITE8713 CIR transceiver
395[ 13.373647] ite_cir: TX-capable: 1
396[ 13.373650] ite_cir: Sample period (ns): 8680
397[ 13.373653] ite_cir: TX carrier frequency (Hz): 38000
398[ 13.373656] ite_cir: TX duty cycle (%): 33
399[ 13.373658] ite_cir: RX low carrier frequency (Hz): 0
400[ 13.373661] ite_cir: RX high carrier frequency (Hz): 0
401[ 13.401253] snd_hda_intel 0000:02:00.1: Disabling MSI
402[ 13.401275] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
403[ 13.443710] Registered IR keymap rc-rc6-mce
404[ 13.453397] usbcore: registered new interface driver ftdi_sio
405[ 13.453451] usbserial: USB Serial support registered for FTDI USB Serial Device
406[ 13.453712] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
407[ 13.453815] usb 2-1: Detected FT232RL
408[ 13.465741] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
409[ 13.480701] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
410[ 13.480711] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
411[ 13.480719] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
412[ 13.480725] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
413[ 13.480732] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
414[ 13.480737] snd_hda_codec_realtek hdaudioC0D0: inputs:
415[ 13.480745] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
416[ 13.536340] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
417[ 13.537336] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
418[ 13.537680] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
419[ 13.539658] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
420[ 13.566491] IR RC6 protocol handler initialized
421[ 13.585002] intel_powerclamp: No package C-state available
422[ 13.593165] rc rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
423[ 13.593329] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input8
424[ 13.595753] rc rc0: lirc_dev: driver ite-cir registered at minor = 0, raw IR receiver, raw IR transmitter
425[ 13.603976] ite_cir: driver has been successfully loaded
426[ 13.977735] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
427[ 14.000852] IR NEC protocol handler initialized
428[ 14.204992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
429[ 14.207548] r8169 0000:03:00.0 eth0: Link is Down
430[ 14.482199] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
431[ 14.579465] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input14
432[ 14.581153] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input15
433[ 14.581487] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input16
434[ 14.586286] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.3/0000:02:00.1/sound/card1/input17
435[ 14.942550] nvidia: loading out-of-tree module taints kernel.
436[ 14.942587] nvidia: module license 'NVIDIA' taints kernel.
437[ 14.942591] Disabling lock debugging due to kernel taint
438[ 14.986576] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
439[ 14.989412] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
440[ 14.989444] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.107 Thu May 24 21:54:01 PDT 2018
441[ 15.923571] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
442[ 15.926066] caller os_map_kernel_space+0xa6/0xb0 [nvidia] mapping multiple BARs
443[ 16.144570] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
444[ 16.144737] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
445[ 16.173970] 8021q: 802.1Q VLAN Support v1.8
446[ 23.720177] snd_hda_intel 0000:02:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
447[ 68.405092] perf: interrupt took too long (2563 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
448[ 80.751634] perf: interrupt took too long (3343 > 3203), lowering kernel.perf_event_max_sample_rate to 59700
449[ 113.260398] perf: interrupt took too long (4264 > 4178), lowering kernel.perf_event_max_sample_rate to 46800
450[ 159.652681] perf: interrupt took too long (5430 > 5330), lowering kernel.perf_event_max_sample_rate to 36600
451[ 199.140498] perf: interrupt took too long (6978 > 6787), lowering kernel.perf_event_max_sample_rate to 28500
452[ 344.537205] perf: interrupt took too long (8801 > 8722), lowering kernel.perf_event_max_sample_rate to 22500
453[ 479.929676] perf: interrupt took too long (11237 > 11001), lowering kernel.perf_event_max_sample_rate to 17700
454[ 636.502631] perf: interrupt took too long (14213 > 14046), lowering kernel.perf_event_max_sample_rate to 13800
455[ 895.599964] ehci-pci 0000:00:1d.7: remove, state 1
456[ 895.599985] usb usb1: USB disconnect, device number 1
457[ 895.599991] usb 1-5: USB disconnect, device number 3
458[ 895.626943] usb 1-6: USB disconnect, device number 4
459[ 895.684926] usb 1-8: USB disconnect, device number 6
460[ 895.758137] ehci-pci 0000:00:1d.7: USB bus 1 deregistered
461[ 895.760456] usb 2-1: USB disconnect, device number 2
462[ 895.761698] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
463[ 895.761780] ftdi_sio 2-1:1.0: device disconnected
464[ 895.771608] usb 5-1: USB disconnect, device number 2
465[ 895.930026] ehci-pci 0000:00:1d.7: EHCI Host Controller
466[ 895.930059] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
467[ 895.930091] ehci-pci 0000:00:1d.7: debug port 1
468[ 895.934031] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
469[ 895.934061] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
470[ 895.945983] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
471[ 895.946904] hub 1-0:1.0: USB hub found
472[ 895.946956] hub 1-0:1.0: 8 ports detected
473[ 895.948567] hub 2-0:1.0: USB hub found
474[ 895.948654] hub 2-0:1.0: 2 ports detected
475[ 895.949285] hub 3-0:1.0: USB hub found
476[ 895.949332] hub 3-0:1.0: 2 ports detected
477[ 895.949903] hub 4-0:1.0: USB hub found
478[ 895.949952] hub 4-0:1.0: 2 ports detected
479[ 895.950506] hub 5-0:1.0: USB hub found
480[ 895.950548] hub 5-0:1.0: 2 ports detected
481[ 896.505601] usb 2-1: new full-speed USB device number 3 using uhci_hcd
482[ 896.726111] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
483[ 896.726386] usb 2-1: Detected FT232RL
484[ 896.728300] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
485[ 897.175355] usb 1-5: new high-speed USB device number 3 using ehci-pci
486[ 897.338278] usb-storage 1-5:1.0: USB Mass Storage device detected
487[ 897.340214] scsi host4: usb-storage 1-5:1.0
488[ 897.462037] usb 1-6: new high-speed USB device number 4 using ehci-pci
489[ 897.618600] usb-storage 1-6:1.0: USB Mass Storage device detected
490[ 897.625040] scsi host5: usb-storage 1-6:1.0
491[ 897.882063] usb 5-1: new low-speed USB device number 3 using uhci_hcd
492[ 898.109050] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C31C.0003/input/input18
493[ 898.166344] hid-generic 0003:046D:C31C.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.3-1/input0
494[ 898.215263] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C31C.0004/input/input19
495[ 898.272341] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C31C.0004/input/input20
496[ 898.273174] hid-generic 0003:046D:C31C.0004: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.3-1/input1
497[ 898.362873] scsi 4:0:0:0: Direct-Access Kingston DataTraveler II 1.13 PQ: 0 ANSI: 0 CCS
498[ 898.364684] sd 4:0:0:0: Attached scsi generic sg1 type 0
499[ 898.367725] sd 4:0:0:0: [sdb] 502784 512-byte logical blocks: (257 MB/246 MiB)
500[ 898.368468] sd 4:0:0:0: [sdb] Write Protect is off
501[ 898.368477] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
502[ 898.371489] sd 4:0:0:0: [sdb] No Caching mode page found
503[ 898.371499] sd 4:0:0:0: [sdb] Assuming drive cache: write through
504[ 898.379929] sdb: sdb1
505[ 898.383083] sd 4:0:0:0: [sdb] Attached SCSI removable disk
506[ 898.502268] usb 1-8: new high-speed USB device number 6 using ehci-pci
507[ 898.630482] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 0206 PQ: 0 ANSI: 0
508[ 898.633712] sd 5:0:0:0: [sdc] Attached SCSI removable disk
509[ 898.634277] sd 5:0:0:0: Attached scsi generic sg2 type 0
510[ 898.654960] usb-storage 1-8:1.0: USB Mass Storage device detected
511[ 898.661241] scsi host6: usb-storage 1-8:1.0
512[ 898.789470] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
513[ 899.671763] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GA10N AT04 PQ: 0 ANSI: 0
514[ 899.679448] sr 6:0:0:0: [sr0] scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
515[ 899.680631] sr 6:0:0:0: Attached scsi CD-ROM sr0
516[ 899.681652] sr 6:0:0:0: Attached scsi generic sg3 type 5
517[ 915.572165] usb 1-5: USB disconnect, device number 3
518[ 917.749283] usb 5-1: USB disconnect, device number 3
519[ 2836.347867] perf: interrupt took too long (17780 > 17766), lowering kernel.perf_event_max_sample_rate to 11100
520[ 2997.279194] PM: suspend entry (deep)
521[ 2997.279201] PM: Syncing filesystems ... done.
522[ 2998.293197] Freezing user space processes ... (elapsed 0.009 seconds) done.
523[ 2998.302514] OOM killer disabled.
524[ 2998.302518] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
525[ 2998.304182] Suspending console(s) (use no_console_suspend to debug)
526[ 2999.195043] sd 0:0:0:0: [sda] Synchronizing SCSI cache
527[ 2999.195360] sd 0:0:0:0: [sda] Stopping disk
528[ 2999.785313] ite-cir 00:05: disabled
529[ 2999.930828] PM: suspend devices took 1.627 seconds
530[ 3000.035415] ACPI: Preparing to enter system sleep state S3
531[ 3000.049353] PM: Saving platform NVS memory
532[ 3000.052122] Disabling non-boot CPUs ...
533[ 3000.071506] smpboot: CPU 1 is now offline
534[ 3000.090359] smpboot: CPU 2 is now offline
535[ 3000.111187] smpboot: CPU 3 is now offline
536[ 3000.113593] ACPI: Low-level resume complete
537[ 3000.113648] PM: Restoring platform NVS memory
538[ 3000.114121] Enabling non-boot CPUs ...
539[ 3000.114190] x86: Booting SMP configuration:
540[ 3000.114193] smpboot: Booting Node 0 Processor 1 APIC 0x2
541[ 3000.116299] TSC synchronization [CPU#0 -> CPU#1]:
542[ 3000.116302] Measured 36 cycles TSC warp between CPUs, turning off TSC clock.
543[ 3000.116309] tsc: Marking TSC unstable due to check_tsc_sync_source failed
544[ 3000.116356] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
545[ 3000.116361] sched_clock: Marking unstable (3000266924988, -151437959)<-(3000288438275, -172083900)
546[ 3000.116911] cache: parent cpu1 should not be sleeping
547[ 3000.116384] CPU1 is up
548[ 3000.116429] clocksource: Switched to clocksource hpet
549[ 3000.116483] smpboot: Booting Node 0 Processor 2 APIC 0x1
550[ 3000.117159] cache: parent cpu2 should not be sleeping
551[ 3000.117540] CPU2 is up
552[ 3000.117589] smpboot: Booting Node 0 Processor 3 APIC 0x3
553[ 3000.118227] cache: parent cpu3 should not be sleeping
554[ 3000.118487] CPU3 is up
555[ 3000.120236] ACPI: Waking up from system sleep state S3
556[ 3000.230165] usb usb2: root hub lost power or was reset
557[ 3000.230260] usb usb3: root hub lost power or was reset
558[ 3000.230349] usb usb4: root hub lost power or was reset
559[ 3000.230437] usb usb5: root hub lost power or was reset
560[ 3000.230557] usb usb6: root hub lost power or was reset
561[ 3000.230561] usb usb7: root hub lost power or was reset
562[ 3000.818637] ite-cir 00:05: activated
563[ 3001.134732] ata2: SATA link down (SStatus 0 SControl 300)
564[ 3001.578385] sd 0:0:0:0: [sda] Starting disk
565[ 3001.832314] r8169 0000:03:00.0 eth0: Link is Down
566[ 3002.168242] usb 2-1: reset full-speed USB device number 3 using uhci_hcd
567[ 3002.331597] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
568[ 3002.348443] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
569[ 3002.348482] ftdi_sio 2-1:1.0: device disconnected
570[ 3002.471552] usb 1-8: reset high-speed USB device number 6 using ehci-pci
571[ 3002.620575] PM: resume devices took 2.394 seconds
572[ 3002.620689] OOM killer enabled.
573[ 3002.620692] Restarting tasks ... done.
574[ 3002.622331] PM: suspend exit
575[ 3002.634017] sr 6:0:0:0: Power-on or device reset occurred
576[ 3002.792842] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
577[ 3002.792972] usb 2-1: Detected FT232RL
578[ 3002.796664] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB1
579[ 3002.944957] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
580[ 3003.085535] ata1.00: configured for UDMA/133
581[ 3008.772399] ehci-pci 0000:00:1d.7: remove, state 1
582[ 3008.772427] usb usb1: USB disconnect, device number 1
583[ 3008.772435] usb 1-6: USB disconnect, device number 4
584[ 3008.887835] usb 1-8: USB disconnect, device number 6
585[ 3008.957318] ehci-pci 0000:00:1d.7: USB bus 1 deregistered
586[ 3009.218254] usb 5-2: new full-speed USB device number 4 using uhci_hcd
587[ 3009.368310] usb 4-2: new full-speed USB device number 2 using uhci_hcd
588[ 3009.368405] usb 5-2: not running at top speed; connect to a high speed hub
589[ 3009.393649] usb-storage 5-2:1.0: USB Mass Storage device detected
590[ 3009.394619] scsi host4: usb-storage 5-2:1.0
591[ 3009.522664] usb 4-2: not running at top speed; connect to a high speed hub
592[ 3009.552917] usb-storage 4-2:1.0: USB Mass Storage device detected
593[ 3009.554524] scsi host5: usb-storage 4-2:1.0
594[ 3009.968875] usb 2-1: USB disconnect, device number 3
595[ 3009.969247] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
596[ 3009.969320] ftdi_sio 2-1:1.0: device disconnected
597[ 3009.970577] usb 4-2: USB disconnect, device number 2
598[ 3009.989788] usb 5-2: USB disconnect, device number 4
599[ 3010.009248] ehci-pci 0000:00:1d.7: EHCI Host Controller
600[ 3010.009279] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
601[ 3010.009312] ehci-pci 0000:00:1d.7: debug port 1
602[ 3010.013275] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
603[ 3010.013325] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
604[ 3010.024948] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
605[ 3010.026026] hub 1-0:1.0: USB hub found
606[ 3010.026092] hub 1-0:1.0: 8 ports detected
607[ 3010.027701] hub 2-0:1.0: USB hub found
608[ 3010.027765] hub 2-0:1.0: 2 ports detected
609[ 3010.028489] hub 3-0:1.0: USB hub found
610[ 3010.028548] hub 3-0:1.0: 2 ports detected
611[ 3010.029142] hub 4-0:1.0: USB hub found
612[ 3010.029189] hub 4-0:1.0: 2 ports detected
613[ 3010.029770] hub 5-0:1.0: USB hub found
614[ 3010.029814] hub 5-0:1.0: 2 ports detected
615[ 3010.598274] usb 2-1: new full-speed USB device number 4 using uhci_hcd
616[ 3010.813567] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
617[ 3010.813690] usb 2-1: Detected FT232RL
618[ 3010.820822] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
619[ 3011.248586] usb 1-6: new high-speed USB device number 3 using ehci-pci
620[ 3011.404063] usb-storage 1-6:1.0: USB Mass Storage device detected
621[ 3011.404560] scsi host4: usb-storage 1-6:1.0
622[ 3011.528474] usb 1-8: new high-speed USB device number 4 using ehci-pci
623[ 3011.680144] usb-storage 1-8:1.0: USB Mass Storage device detected
624[ 3011.681739] scsi host5: usb-storage 1-8:1.0
625[ 3012.420130] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0206 PQ: 0 ANSI: 0
626[ 3012.421300] sd 4:0:0:0: Attached scsi generic sg1 type 0
627[ 3012.425524] sd 4:0:0:0: [sdb] Attached SCSI removable disk
628[ 3012.689448] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GA10N AT04 PQ: 0 ANSI: 0
629[ 3012.699907] sr 5:0:0:0: [sr0] scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
630[ 3012.701149] sr 5:0:0:0: Attached scsi CD-ROM sr0
631[ 3012.702551] sr 5:0:0:0: Attached scsi generic sg2 type 5
632[ 3911.682653] PM: suspend entry (deep)
633[ 3911.682660] PM: Syncing filesystems ... done.
634[ 3915.442675] Freezing user space processes ... (elapsed 0.003 seconds) done.
635[ 3915.446202] OOM killer disabled.
636[ 3915.446204] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
637[ 3915.447492] Suspending console(s) (use no_console_suspend to debug)
638[ 3916.324830] sd 0:0:0:0: [sda] Synchronizing SCSI cache
639[ 3916.325040] sd 0:0:0:0: [sda] Stopping disk
640[ 3916.909083] ite-cir 00:05: disabled
641[ 3917.024434] PM: suspend devices took 1.577 seconds
642[ 3917.124941] ACPI: Preparing to enter system sleep state S3
643[ 3917.128762] PM: Saving platform NVS memory
644[ 3917.129079] Disabling non-boot CPUs ...
645[ 3917.147891] smpboot: CPU 1 is now offline
646[ 3917.166849] smpboot: CPU 2 is now offline
647[ 3917.187808] smpboot: CPU 3 is now offline
648[ 3917.188416] ACPI: Low-level resume complete
649[ 3917.188416] PM: Restoring platform NVS memory
650[ 3917.188416] Enabling non-boot CPUs ...
651[ 3917.188416] x86: Booting SMP configuration:
652[ 3917.188416] smpboot: Booting Node 0 Processor 1 APIC 0x2
653[ 3917.190063] cache: parent cpu1 should not be sleeping
654[ 3917.190305] CPU1 is up
655[ 3917.190346] smpboot: Booting Node 0 Processor 2 APIC 0x1
656[ 3917.190991] cache: parent cpu2 should not be sleeping
657[ 3917.191370] CPU2 is up
658[ 3917.191422] smpboot: Booting Node 0 Processor 3 APIC 0x3
659[ 3917.192075] cache: parent cpu3 should not be sleeping
660[ 3917.192345] CPU3 is up
661[ 3917.194080] ACPI: Waking up from system sleep state S3
662[ 3917.300083] usb usb2: root hub lost power or was reset
663[ 3917.300179] usb usb3: root hub lost power or was reset
664[ 3917.300269] usb usb4: root hub lost power or was reset
665[ 3917.300358] usb usb5: root hub lost power or was reset
666[ 3917.300479] usb usb6: root hub lost power or was reset
667[ 3917.300483] usb usb7: root hub lost power or was reset
668[ 3917.888588] ite-cir 00:05: activated
669[ 3918.204641] ata2: SATA link down (SStatus 0 SControl 300)
670[ 3918.648250] sd 0:0:0:0: [sda] Starting disk
671[ 3918.898885] r8169 0000:03:00.0 eth0: Link is Down
672[ 3919.238150] usb 2-1: reset full-speed USB device number 4 using uhci_hcd
673[ 3919.415461] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
674[ 3919.415499] ftdi_sio 2-1:1.0: device disconnected
675[ 3919.438781] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
676[ 3919.538126] usb 1-8: reset high-speed USB device number 4 using ehci-pci
677[ 3919.687155] PM: resume devices took 2.390 seconds
678[ 3919.687256] OOM killer enabled.
679[ 3919.687259] Restarting tasks ... done.
680[ 3919.701588] PM: suspend exit
681[ 3919.713495] sr 5:0:0:0: Power-on or device reset occurred
682[ 3919.858440] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
683[ 3919.858597] usb 2-1: Detected FT232RL
684[ 3919.861568] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
685[ 3920.088211] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
686[ 3920.224569] ata1.00: configured for UDMA/133
687[ 3925.847518] ehci-pci 0000:00:1d.7: remove, state 1
688[ 3925.847548] usb usb1: USB disconnect, device number 1
689[ 3925.847557] usb 1-6: USB disconnect, device number 3
690[ 3925.918943] usb 1-8: USB disconnect, device number 4
691[ 3925.972503] ehci-pci 0000:00:1d.7: USB bus 1 deregistered
692[ 3926.228164] usb 5-2: new full-speed USB device number 5 using uhci_hcd
693[ 3926.354798] usb 4-2: new full-speed USB device number 3 using uhci_hcd
694[ 3926.382375] usb 5-2: not running at top speed; connect to a high speed hub
695[ 3926.408543] usb-storage 5-2:1.0: USB Mass Storage device detected
696[ 3926.409071] scsi host4: usb-storage 5-2:1.0
697[ 3926.509217] usb 4-2: not running at top speed; connect to a high speed hub
698[ 3926.540423] usb-storage 4-2:1.0: USB Mass Storage device detected
699[ 3926.540860] scsi host5: usb-storage 4-2:1.0
700[ 3926.980184] usb 2-1: USB disconnect, device number 4
701[ 3926.981569] ftdi_sio ttyUSB0: failed to get modem status: -19
702[ 3926.981843] ftdi_sio ttyUSB0: error from flowcontrol urb
703[ 3926.986187] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
704[ 3926.986248] ftdi_sio 2-1:1.0: device disconnected
705[ 3926.990361] usb 4-2: USB disconnect, device number 3
706[ 3927.012851] usb 5-2: USB disconnect, device number 5
707[ 3927.039201] ehci-pci 0000:00:1d.7: EHCI Host Controller
708[ 3927.039238] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
709[ 3927.039277] ehci-pci 0000:00:1d.7: debug port 1
710[ 3927.043238] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
711[ 3927.043273] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
712[ 3927.054838] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
713[ 3927.055519] hub 1-0:1.0: USB hub found
714[ 3927.055563] hub 1-0:1.0: 8 ports detected
715[ 3927.056876] hub 2-0:1.0: USB hub found
716[ 3927.056933] hub 2-0:1.0: 2 ports detected
717[ 3927.057506] hub 3-0:1.0: USB hub found
718[ 3927.057556] hub 3-0:1.0: 2 ports detected
719[ 3927.058191] hub 4-0:1.0: USB hub found
720[ 3927.058251] hub 4-0:1.0: 2 ports detected
721[ 3927.058848] hub 5-0:1.0: USB hub found
722[ 3927.058896] hub 5-0:1.0: 2 ports detected
723[ 3927.598398] usb 2-1: new full-speed USB device number 5 using uhci_hcd
724[ 3927.818839] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
725[ 3927.819153] usb 2-1: Detected FT232RL
726[ 3927.821387] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
727[ 3928.281501] usb 1-6: new high-speed USB device number 3 using ehci-pci
728[ 3928.434407] usb-storage 1-6:1.0: USB Mass Storage device detected
729[ 3928.434724] scsi host4: usb-storage 1-6:1.0
730[ 3928.558501] usb 1-8: new high-speed USB device number 4 using ehci-pci
731[ 3928.708776] usb-storage 1-8:1.0: USB Mass Storage device detected
732[ 3928.709728] scsi host5: usb-storage 1-8:1.0
733[ 3929.461912] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0206 PQ: 0 ANSI: 0
734[ 3929.467625] sd 4:0:0:0: [sdb] Attached SCSI removable disk
735[ 3929.468641] sd 4:0:0:0: Attached scsi generic sg1 type 0
736[ 3929.728200] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GA10N AT04 PQ: 0 ANSI: 0
737[ 3929.737669] sr 5:0:0:0: [sr0] scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
738[ 3929.738279] sr 5:0:0:0: Attached scsi CD-ROM sr0
739[ 3929.738764] sr 5:0:0:0: Attached scsi generic sg2 type 5