· 6 years ago · Sep 09, 2019, 01:00 PM
1[ 0.000000] Linux version 4.19.66-gentoo (root@fanny) (gcc version 8.3.0 (Gentoo 8.3.0-r1 p1.1)) #2 SMP PREEMPT Sat Sep 7 20:28:28 CEST 2019
2[ 0.000000] Command line: root=/dev/sda9
3[ 0.000000] KERNEL supported cpus:
4[ 0.000000] Intel GenuineIntel
5[ 0.000000] Disabled fast string operations
6[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
7[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
8[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
9[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
10[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
11[ 0.000000] BIOS-provided physical RAM map:
12[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca98efff] usable
16[ 0.000000] BIOS-e820: [mem 0x00000000ca98f000-0x00000000cae9efff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000cae9f000-0x00000000caf9efff] ACPI NVS
18[ 0.000000] BIOS-e820: [mem 0x00000000caf9f000-0x00000000caffefff] ACPI data
19[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
20[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
21[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
23[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
24[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
25[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
26[ 0.000000] BIOS-e820: [mem 0x00000000ffda0000-0x00000000ffffffff] reserved
27[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022e5fffff] usable
28[ 0.000000] NX (Execute Disable) protection: active
29[ 0.000000] SMBIOS 2.6 present.
30[ 0.000000] DMI: FUJITSU LIFEBOOK T901/FJNB228, BIOS Version 1.11 09/15/2011
31[ 0.000000] tsc: Fast TSC calibration using PIT
32[ 0.000000] tsc: Detected 2694.001 MHz processor
33[ 0.001376] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
34[ 0.001378] e820: remove [mem 0x000a0000-0x000fffff] usable
35[ 0.001383] last_pfn = 0x22e600 max_arch_pfn = 0x400000000
36[ 0.001386] MTRR default type: uncachable
37[ 0.001387] MTRR fixed ranges enabled:
38[ 0.001388] 00000-9FFFF write-back
39[ 0.001388] A0000-BFFFF uncachable
40[ 0.001389] C0000-FFFFF write-protect
41[ 0.001389] MTRR variable ranges enabled:
42[ 0.001390] 0 base 0FFC00000 mask FFFC00000 write-protect
43[ 0.001391] 1 base 000000000 mask F80000000 write-back
44[ 0.001392] 2 base 080000000 mask FC0000000 write-back
45[ 0.001392] 3 base 0C0000000 mask FE0000000 write-back
46[ 0.001393] 4 base 0D0000000 mask FF0000000 uncachable
47[ 0.001394] 5 base 0CC000000 mask FFC000000 uncachable
48[ 0.001394] 6 base 0CB000000 mask FFF000000 uncachable
49[ 0.001395] 7 base 100000000 mask F00000000 write-back
50[ 0.001395] 8 base 200000000 mask FC0000000 write-back
51[ 0.001396] 9 base 230000000 mask FF0000000 uncachable
52[ 0.002167] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
53[ 0.002342] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
54[ 0.002383] Scanning 1 areas for low memory corruption
55[ 0.002386] reserving inaccessible SNB gfx pages
56[ 0.002390] BRK [0x02c01000, 0x02c01fff] PGTABLE
57[ 0.002391] BRK [0x02c02000, 0x02c02fff] PGTABLE
58[ 0.002392] BRK [0x02c03000, 0x02c03fff] PGTABLE
59[ 0.002428] BRK [0x02c04000, 0x02c04fff] PGTABLE
60[ 0.002679] BRK [0x02c05000, 0x02c05fff] PGTABLE
61[ 0.002723] BRK [0x02c06000, 0x02c06fff] PGTABLE
62[ 0.002782] ACPI: Early table checksum verification disabled
63[ 0.002823] ACPI: RSDP 0x00000000000F00E0 000024 (v02 FUJ )
64[ 0.002826] ACPI: XSDT 0x00000000CAFFE120 00009C (v01 FUJ PC 010B0000 FUJ 00000001)
65[ 0.002831] ACPI: FACP 0x00000000CAFED000 0000F4 (v03 FUJ PC 010B0000 FUJ 00000001)
66[ 0.002836] ACPI: DSDT 0x00000000CAFF0000 009154 (v02 FUJ FJNB228 010B0000 INTL 20061109)
67[ 0.002839] ACPI: FACS 0x00000000CAF42000 000040
68[ 0.002841] ACPI: FACS 0x00000000CAF42000 000040
69[ 0.002843] ACPI: SLIC 0x00000000CAFFD000 000176 (v01 FUJ PC 010B0000 FUJ 00000001)
70[ 0.002846] ACPI: SSDT 0x00000000CAFFC000 000346 (v01 FUJ SataAhci 00000001 INTL 20061109)
71[ 0.002848] ACPI: SSDT 0x00000000CAFFB000 0002C1 (v01 FUJ BayAhci2 00000001 INTL 20061109)
72[ 0.002851] ACPI: SSDT 0x00000000CAFFA000 0000B6 (v02 FUJ DockSsdt 00000001 INTL 20061109)
73[ 0.002853] ACPI: HPET 0x00000000CAFEC000 000038 (v01 FUJ PC 00000001 PTL 00000001)
74[ 0.002856] ACPI: APIC 0x00000000CAFEB000 000098 (v01 FUJ PC 00000001 PTL 00000001)
75[ 0.002858] ACPI: MCFG 0x00000000CAFEA000 00003C (v01 FUJ PC 00000001 PTL 00000001)
76[ 0.002861] ACPI: ASF! 0x00000000CAFEF000 0000A5 (v32 FUJ PC 00000001 PTL 00000001)
77[ 0.002864] ACPI: TCPA 0x00000000CAFE9000 000032 (v02 PTL CRESTLN 06040000 00005A52)
78[ 0.002866] ACPI: SSDT 0x00000000CAFE8000 000804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
79[ 0.002869] ACPI: SSDT 0x00000000CAFE7000 0009F5 (v01 PmRef CpuPm 00003000 INTL 20061109)
80[ 0.002872] ACPI: UEFI 0x00000000CAFE6000 00003E (v01 FUJ PC 00000001 PTL 00000001)
81[ 0.002875] ACPI: UEFI 0x00000000CAFE5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
82[ 0.002877] ACPI: UEFI 0x00000000CAFE4000 000256 (v01 FUJ PC 00000001 PTL 00000001)
83[ 0.002884] ACPI: Local APIC address 0xfee00000
84[ 0.002918] No NUMA configuration found
85[ 0.002919] Faking a node at [mem 0x0000000000000000-0x000000022e5fffff]
86[ 0.002922] NODE_DATA(0) allocated [mem 0x22e5f5000-0x22e5f8fff]
87[ 0.002944] Zone ranges:
88[ 0.002945] DMA [mem 0x0000000000001000-0x0000000000ffffff]
89[ 0.002947] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
90[ 0.002948] Normal [mem 0x0000000100000000-0x000000022e5fffff]
91[ 0.002949] Movable zone start for each node
92[ 0.002949] Early memory node ranges
93[ 0.002950] node 0: [mem 0x0000000000001000-0x000000000009cfff]
94[ 0.002951] node 0: [mem 0x0000000000100000-0x00000000ca98efff]
95[ 0.002952] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
96[ 0.002952] node 0: [mem 0x0000000100000000-0x000000022e5fffff]
97[ 0.002955] Reserved but unavailable: 100 pages
98[ 0.002956] Initmem setup node 0 [mem 0x0000000000001000-0x000000022e5fffff]
99[ 0.002958] On node 0 totalpages: 2068268
100[ 0.002959] DMA zone: 64 pages used for memmap
101[ 0.002959] DMA zone: 156 pages reserved
102[ 0.002960] DMA zone: 3996 pages, LIFO batch:0
103[ 0.003063] DMA32 zone: 12903 pages used for memmap
104[ 0.003063] DMA32 zone: 825744 pages, LIFO batch:63
105[ 0.024860] Normal zone: 19352 pages used for memmap
106[ 0.024861] Normal zone: 1238528 pages, LIFO batch:63
107[ 0.055296] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
108[ 0.055424] ACPI: PM-Timer IO Port: 0x408
109[ 0.055426] ACPI: Local APIC address 0xfee00000
110[ 0.055431] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
111[ 0.055432] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
112[ 0.055443] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
113[ 0.055445] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
114[ 0.055446] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
115[ 0.055447] ACPI: IRQ0 used by override.
116[ 0.055448] ACPI: IRQ9 used by override.
117[ 0.055449] Using ACPI (MADT) for SMP configuration information
118[ 0.055451] ACPI: HPET id: 0x8086a301 base: 0xfed00000
119[ 0.055455] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
120[ 0.055462] [mem 0xcfa00000-0xf7ffffff] available for PCI devices
121[ 0.055464] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
122[ 0.172107] random: get_random_bytes called from start_kernel+0x8a/0x418 with crng_init=0
123[ 0.172114] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
124[ 0.173515] percpu: Embedded 44 pages/cpu s140760 r8192 d31272 u262144
125[ 0.173520] pcpu-alloc: s140760 r8192 d31272 u262144 alloc=1*2097152
126[ 0.173521] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
127[ 0.173538] Built 1 zonelists, mobility grouping on. Total pages: 2035793
128[ 0.173539] Policy zone: Normal
129[ 0.173540] Kernel command line: root=/dev/sda9
130[ 0.201570] Calgary: detecting Calgary via BIOS EBDA area
131[ 0.201571] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
132[ 0.222821] Memory: 8045136K/8273072K available (14360K kernel code, 1632K rwdata, 3412K rodata, 1208K init, 924K bss, 227936K reserved, 0K cma-reserved)
133[ 0.222862] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
134[ 0.222866] Kernel/User page tables isolation: enabled
135[ 0.222976] rcu: Preemptible hierarchical RCU implementation.
136[ 0.222978] Tasks RCU enabled.
137[ 0.223180] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
138[ 0.225026] Console: colour VGA+ 80x25
139[ 0.231980] console [tty0] enabled
140[ 0.232055] ACPI: Core revision 20180810
141[ 0.232295] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
142[ 0.232406] hpet clockevent registered
143[ 0.232411] APIC: Switch to symmetric I/O mode setup
144[ 0.232898] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
145[ 0.237410] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d51b2b1ce, max_idle_ns: 440795246547 ns
146[ 0.237523] Calibrating delay loop (skipped), value calculated using timer frequency.. 5388.00 BogoMIPS (lpj=2694001)
147[ 0.237627] pid_max: default: 32768 minimum: 301
148[ 0.238846] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
149[ 0.239450] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
150[ 0.239543] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
151[ 0.239633] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
152[ 0.239839] Disabled fast string operations
153[ 0.239914] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
154[ 0.239984] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
155[ 0.240067] CPU0: Thermal monitoring enabled (TM1)
156[ 0.240142] process: using mwait in idle threads
157[ 0.240212] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
158[ 0.240282] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
159[ 0.240353] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
160[ 0.240453] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
161[ 0.240454] Speculative Store Bypass: Vulnerable
162[ 0.240611] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
163[ 0.240842] Freeing SMP alternatives memory: 40K
164[ 0.241573] TSC deadline timer enabled
165[ 0.241576] smpboot: CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz (family: 0x6, model: 0x2a, stepping: 0x7)
166[ 0.247532] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
167[ 0.247704] core: PEBS disabled due to CPU errata, please upgrade microcode
168[ 0.247777] ... version: 3
169[ 0.247844] ... bit width: 48
170[ 0.247911] ... generic registers: 4
171[ 0.247978] ... value mask: 0000ffffffffffff
172[ 0.248047] ... max period: 00007fffffffffff
173[ 0.248116] ... fixed-purpose events: 3
174[ 0.248183] ... event mask: 000000070000000f
175[ 0.249522] rcu: Hierarchical SRCU implementation.
176[ 0.252716] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
177[ 0.254525] smp: Bringing up secondary CPUs ...
178[ 0.262547] x86: Booting SMP configuration:
179[ 0.262635] .... node #0, CPUs: #1
180[ 0.010146] Disabled fast string operations
181[ 0.263637] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
182[ 0.271542] #2
183[ 0.010146] Disabled fast string operations
184[ 0.280542] #3
185[ 0.010146] Disabled fast string operations
186[ 0.281553] smp: Brought up 1 node, 4 CPUs
187[ 0.281716] smpboot: Max logical packages: 2
188[ 0.281784] smpboot: Total of 4 processors activated (21552.00 BogoMIPS)
189[ 0.282785] devtmpfs: initialized
190[ 0.282785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
191[ 0.282785] futex hash table entries: 2048 (order: 5, 131072 bytes)
192[ 0.282785] xor: automatically using best checksumming function avx
193[ 0.282877] NET: Registered protocol family 16
194[ 0.283569] audit: initializing netlink subsys (disabled)
195[ 0.283642] audit: type=2000 audit(1568040271.051:1): state=initialized audit_enabled=0 res=1
196[ 0.283642] cpuidle: using governor ladder
197[ 0.283712] cpuidle: using governor menu
198[ 0.283712] ACPI: bus type PCI registered
199[ 0.283724] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
200[ 0.283830] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
201[ 0.283830] PCI: Using configuration type 1 for base access
202[ 0.283830] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
203[ 0.287109] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
204[ 0.287298] cryptd: max_cpu_qlen set to 1000
205[ 0.304515] raid6: sse2x1 gen() 8218 MB/s
206[ 0.321519] raid6: sse2x1 xor() 5523 MB/s
207[ 0.338515] raid6: sse2x2 gen() 9718 MB/s
208[ 0.354564] raid6: sse2x2 xor() 6722 MB/s
209[ 0.371564] raid6: sse2x4 gen() 11484 MB/s
210[ 0.388571] raid6: sse2x4 xor() 7677 MB/s
211[ 0.388639] raid6: using algorithm sse2x4 gen() 11484 MB/s
212[ 0.388709] raid6: .... xor() 7677 MB/s, rmw enabled
213[ 0.388778] raid6: using ssse3x2 recovery algorithm
214[ 0.389540] ACPI: Added _OSI(Module Device)
215[ 0.389540] ACPI: Added _OSI(Processor Device)
216[ 0.389540] ACPI: Added _OSI(3.0 _SCP Extensions)
217[ 0.389540] ACPI: Added _OSI(Processor Aggregator Device)
218[ 0.389540] ACPI: Added _OSI(Linux-Dell-Video)
219[ 0.389540] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
220[ 0.394966] ACPI: 6 ACPI AML tables successfully acquired and loaded
221[ 0.395813] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
222[ 0.395953] ACPI: Dynamic OEM Table Load:
223[ 0.396031] ACPI: SSDT 0xFFFF888224851800 0005F0 (v02 FUJ VistSsdt 00000001 INTL 20061109)
224[ 0.513188] ACPI: Dynamic OEM Table Load:
225[ 0.513261] ACPI: SSDT 0xFFFF888224852000 0007A9 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
226[ 0.513669] ACPI: Dynamic OEM Table Load:
227[ 0.513741] ACPI: SSDT 0xFFFF888224F72800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
228[ 0.514020] ACPI: Dynamic OEM Table Load:
229[ 0.514090] ACPI: SSDT 0xFFFF888224951600 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
230[ 0.514724] ACPI: EC: EC started
231[ 0.514790] ACPI: EC: interrupt blocked
232[ 0.514875] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
233[ 0.514945] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
234[ 0.515018] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
235[ 0.515091] ACPI: Interpreter enabled
236[ 0.515163] ACPI: (supports S0 S5)
237[ 0.515229] ACPI: Using IOAPIC for interrupt routing
238[ 0.515321] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
239[ 0.515626] ACPI: Enabled 13 GPEs in block 00 to 3F
240[ 0.520527] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
241[ 0.521527] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
242[ 0.521527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
243[ 0.521527] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
244[ 0.521527] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
245[ 0.521742] PCI host bridge to bus 0000:00
246[ 0.521812] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
247[ 0.521885] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
248[ 0.521957] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
249[ 0.522030] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
250[ 0.522103] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
251[ 0.522177] pci_bus 0000:00: root bus resource [bus 00-3e]
252[ 0.522253] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
253[ 0.522530] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
254[ 0.522530] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
255[ 0.522530] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
256[ 0.522530] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
257[ 0.522530] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
258[ 0.522530] pci 0000:00:16.0: reg 0x10: [mem 0xe2725000-0xe272500f 64bit]
259[ 0.522606] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
260[ 0.522679] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
261[ 0.522709] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
262[ 0.522721] pci 0000:00:16.3: reg 0x14: [mem 0xe272c000-0xe272cfff]
263[ 0.523529] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
264[ 0.523529] pci 0000:00:19.0: reg 0x10: [mem 0xe2700000-0xe271ffff]
265[ 0.523529] pci 0000:00:19.0: reg 0x14: [mem 0xe272b000-0xe272bfff]
266[ 0.523529] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
267[ 0.523529] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
268[ 0.523529] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
269[ 0.523529] pci 0000:00:1a.0: reg 0x10: [mem 0xe272a000-0xe272a3ff]
270[ 0.523529] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
271[ 0.523529] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
272[ 0.523529] pci 0000:00:1b.0: reg 0x10: [mem 0xe2720000-0xe2723fff 64bit]
273[ 0.523536] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
274[ 0.523608] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
275[ 0.523740] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
276[ 0.524527] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
277[ 0.524527] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
278[ 0.524527] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
279[ 0.524527] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
280[ 0.524527] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
281[ 0.524527] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
282[ 0.524527] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
283[ 0.524527] pci 0000:00:1d.0: reg 0x10: [mem 0xe2729000-0xe27293ff]
284[ 0.524641] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
285[ 0.524717] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
286[ 0.525527] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
287[ 0.525527] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
288[ 0.525527] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
289[ 0.525527] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
290[ 0.525527] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
291[ 0.525527] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
292[ 0.525527] pci 0000:00:1f.2: reg 0x24: [mem 0xe2728000-0xe27287ff]
293[ 0.525527] pci 0000:00:1f.2: PME# supported from D3hot
294[ 0.525528] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
295[ 0.525528] pci 0000:00:1f.3: reg 0x10: [mem 0xe2724000-0xe27240ff 64bit]
296[ 0.525528] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
297[ 0.525529] pci 0000:00:1c.0: PCI bridge to [bus 01-09]
298[ 0.525529] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
299[ 0.525529] pci 0000:00:1c.0: bridge window [mem 0xe0700000-0xe26fffff]
300[ 0.525730] pci 0000:0a:00.0: [8086:0082] type 00 class 0x028000
301[ 0.525964] pci 0000:0a:00.0: reg 0x10: [mem 0xe0600000-0xe0601fff 64bit]
302[ 0.526753] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
303[ 0.527199] pci 0000:00:1c.2: PCI bridge to [bus 0a]
304[ 0.527275] pci 0000:00:1c.2: bridge window [mem 0xe0600000-0xe06fffff]
305[ 0.527603] pci 0000:0b:00.0: [1033:0194] type 00 class 0x0c0330
306[ 0.527603] pci 0000:0b:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
307[ 0.527603] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
308[ 0.527733] pci 0000:00:1c.3: PCI bridge to [bus 0b]
309[ 0.527809] pci 0000:00:1c.3: bridge window [mem 0xe0500000-0xe05fffff]
310[ 0.528529] pci 0000:0c:00.0: [1217:11f7] type 00 class 0x0c0010
311[ 0.528529] pci 0000:0c:00.0: reg 0x10: [mem 0xe0403000-0xe0403fff]
312[ 0.528529] pci 0000:0c:00.0: supports D1 D2
313[ 0.528529] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
314[ 0.528541] pci 0000:0c:00.1: [1217:8320] type 00 class 0x080501
315[ 0.528541] pci 0000:0c:00.1: reg 0x10: [mem 0xe0402000-0xe04021ff]
316[ 0.528790] pci 0000:0c:00.1: supports D1 D2
317[ 0.528791] pci 0000:0c:00.1: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.528918] pci 0000:0c:00.2: [1217:8330] type 00 class 0x018000
319[ 0.528982] pci 0000:0c:00.2: reg 0x10: [mem 0xe0401000-0xe04013ff]
320[ 0.529034] pci 0000:0c:00.2: reg 0x18: [mem 0xe0400000-0xe04003ff]
321[ 0.529289] pci 0000:0c:00.2: supports D1 D2
322[ 0.529290] pci 0000:0c:00.2: PME# supported from D0 D1 D2 D3hot D3cold
323[ 0.532593] pci 0000:00:1c.7: PCI bridge to [bus 0c]
324[ 0.532682] pci 0000:00:1c.7: bridge window [mem 0xe0400000-0xe04fffff]
325[ 0.533528] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
326[ 0.533528] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
327[ 0.533528] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
328[ 0.534562] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
329[ 0.534681] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
330[ 0.534799] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
331[ 0.534918] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
332[ 0.535037] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
333[ 0.535424] ACPI: EC: interrupt unblocked
334[ 0.535504] ACPI: EC: event unblocked
335[ 0.535518] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
336[ 0.535591] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
337[ 0.535740] pci 0000:00:02.0: vgaarb: setting as boot VGA device
338[ 0.535740] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
339[ 0.535740] pci 0000:00:02.0: vgaarb: bridge control possible
340[ 0.535768] vgaarb: loaded
341[ 0.535902] SCSI subsystem initialized
342[ 0.535982] libata version 3.00 loaded.
343[ 0.535982] ACPI: bus type USB registered
344[ 0.535982] usbcore: registered new interface driver usbfs
345[ 0.535982] usbcore: registered new interface driver hub
346[ 0.536529] usbcore: registered new device driver usb
347[ 0.536628] videodev: Linux video capture interface: v2.00
348[ 0.536714] EDAC MC: Ver: 3.0.0
349[ 0.536921] Advanced Linux Sound Architecture Driver Initialized.
350[ 0.536921] PCI: Using ACPI for IRQ routing
351[ 0.539294] PCI: pci_cache_line_size set to 64 bytes
352[ 0.539427] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
353[ 0.539428] e820: reserve RAM buffer [mem 0xca98f000-0xcbffffff]
354[ 0.539429] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
355[ 0.539430] e820: reserve RAM buffer [mem 0x22e600000-0x22fffffff]
356[ 0.539540] Bluetooth: Core ver 2.22
357[ 0.540523] NET: Registered protocol family 31
358[ 0.540523] Bluetooth: HCI device and connection manager initialized
359[ 0.540523] Bluetooth: HCI socket layer initialized
360[ 0.540523] Bluetooth: L2CAP socket layer initialized
361[ 0.540523] Bluetooth: SCO socket layer initialized
362[ 0.540541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
363[ 0.540616] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
364[ 0.542528] clocksource: Switched to clocksource tsc-early
365[ 0.554686] pnp: PnP ACPI init
366[ 0.554916] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
367[ 0.554989] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
368[ 0.555062] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
369[ 0.555134] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
370[ 0.555206] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
371[ 0.555277] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
372[ 0.555350] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
373[ 0.555422] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
374[ 0.555494] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
375[ 0.555570] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
376[ 0.555642] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
377[ 0.555714] system 00:00: [mem 0xfed08000-0xfed08fff] has been reserved
378[ 0.555791] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
379[ 0.555941] system 00:01: [io 0x0400-0x047f] has been reserved
380[ 0.556012] system 00:01: [io 0x0480-0x048f] has been reserved
381[ 0.556083] system 00:01: [io 0x04d0-0x04d1] has been reserved
382[ 0.556154] system 00:01: [io 0x0500-0x057f] has been reserved
383[ 0.556225] system 00:01: [io 0x1640-0x164f] has been reserved
384[ 0.556295] system 00:01: [io 0xf800-0xf87f] has been reserved
385[ 0.556367] system 00:01: [io 0xf880-0xf8ff] has been reserved
386[ 0.556438] system 00:01: [io 0xfc00-0xfc7f] has been reserved
387[ 0.556508] system 00:01: [io 0xfc80-0xfcff] has been reserved
388[ 0.556582] system 00:01: [io 0xfd00-0xfd6f] has been reserved
389[ 0.556653] system 00:01: [io 0x1000-0x1003] has been reserved
390[ 0.556728] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
391[ 0.556777] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
392[ 0.556805] pnp 00:03: Plug and Play ACPI device, IDs SYN1f03 PNP0f13 (active)
393[ 0.556854] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
394[ 0.556942] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
395[ 0.557018] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
396[ 0.557185] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
397[ 0.557422] pnp: PnP ACPI: found 7 devices
398[ 0.562032] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
399[ 0.562150] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-09] add_size 200000 add_align 100000
400[ 0.562188] pci 0000:00:1c.0: BAR 9: assigned [mem 0xcfa00000-0xcfbfffff 64bit pref]
401[ 0.562263] pci 0000:00:1c.0: PCI bridge to [bus 01-09]
402[ 0.562334] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
403[ 0.562411] pci 0000:00:1c.0: bridge window [mem 0xe0700000-0xe26fffff]
404[ 0.562487] pci 0000:00:1c.0: bridge window [mem 0xcfa00000-0xcfbfffff 64bit pref]
405[ 0.562570] pci 0000:00:1c.2: PCI bridge to [bus 0a]
406[ 0.562643] pci 0000:00:1c.2: bridge window [mem 0xe0600000-0xe06fffff]
407[ 0.562726] pci 0000:00:1c.3: PCI bridge to [bus 0b]
408[ 0.562800] pci 0000:00:1c.3: bridge window [mem 0xe0500000-0xe05fffff]
409[ 0.562883] pci 0000:00:1c.7: PCI bridge to [bus 0c]
410[ 0.562957] pci 0000:00:1c.7: bridge window [mem 0xe0400000-0xe04fffff]
411[ 0.563041] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
412[ 0.563042] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
413[ 0.563043] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
414[ 0.563044] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
415[ 0.563045] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
416[ 0.563046] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
417[ 0.563047] pci_bus 0000:01: resource 1 [mem 0xe0700000-0xe26fffff]
418[ 0.563048] pci_bus 0000:01: resource 2 [mem 0xcfa00000-0xcfbfffff 64bit pref]
419[ 0.563049] pci_bus 0000:0a: resource 1 [mem 0xe0600000-0xe06fffff]
420[ 0.563050] pci_bus 0000:0b: resource 1 [mem 0xe0500000-0xe05fffff]
421[ 0.563051] pci_bus 0000:0c: resource 1 [mem 0xe0400000-0xe04fffff]
422[ 0.563113] NET: Registered protocol family 2
423[ 0.563278] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
424[ 0.563376] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
425[ 0.563560] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
426[ 0.563747] TCP: Hash tables configured (established 65536 bind 65536)
427[ 0.563849] UDP hash table entries: 4096 (order: 5, 131072 bytes)
428[ 0.563943] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
429[ 0.564059] NET: Registered protocol family 1
430[ 0.564211] RPC: Registered named UNIX socket transport module.
431[ 0.564282] RPC: Registered udp transport module.
432[ 0.564350] RPC: Registered tcp transport module.
433[ 0.564419] RPC: Registered tcp NFSv4.1 backchannel transport module.
434[ 0.564572] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
435[ 0.565064] PCI: CLS 64 bytes, default 64
436[ 0.565075] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
437[ 0.565147] software IO TLB: mapped [mem 0xc698f000-0xca98f000] (64MB)
438[ 0.565255] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
439[ 0.565329] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
440[ 0.565399] RAPL PMU: hw unit of domain package 2^-16 Joules
441[ 0.565469] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
442[ 0.566028] Scanning for low memory corruption every 60 seconds
443[ 0.567405] AVX2 or AES-NI instructions are not detected.
444[ 0.567476] AVX2 instructions are not detected.
445[ 0.568281] Initialise system trusted keyrings
446[ 0.568370] workingset: timestamp_bits=56 max_order=21 bucket_order=0
447[ 0.569967] NFS: Registering the id_resolver key type
448[ 0.570042] Key type id_resolver registered
449[ 0.570110] Key type id_legacy registered
450[ 0.570262] ntfs: driver 2.1.32 [Flags: R/O].
451[ 0.570406] SGI XFS with security attributes, no debug enabled
452[ 0.572092] NET: Registered protocol family 38
453[ 0.572180] Key type asymmetric registered
454[ 0.572248] Asymmetric key parser 'x509' registered
455[ 0.572324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
456[ 0.572398] io scheduler noop registered
457[ 0.572465] io scheduler deadline registered
458[ 0.572560] io scheduler cfq registered (default)
459[ 0.572629] io scheduler mq-deadline registered
460[ 0.572698] io scheduler kyber registered
461[ 0.573154] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
462[ 0.573223] crc32: self tests passed, processed 225944 bytes in 191498 nsec
463[ 0.573494] crc32c: CRC_LE_BITS = 64
464[ 0.573563] crc32c: self tests passed, processed 225944 bytes in 98616 nsec
465[ 0.592246] crc32_combine: 8373 self tests passed
466[ 0.610909] crc32c_combine: 8373 self tests passed
467[ 0.611496] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
468[ 0.632304] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A
469[ 0.632589] Non-volatile memory driver v1.3
470[ 0.632674] Linux agpgart interface v0.103
471[ 0.632748] intel_idle: MWAIT substates: 0x21120
472[ 0.632749] intel_idle: v0.4.1 model 0x2A
473[ 0.632846] intel_idle: lapic_timer_reliable_states 0xffffffff
474[ 0.632921] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
475[ 0.633038] ACPI: AC Adapter [AC] (on-line)
476[ 0.633165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
477[ 0.633241] ACPI: Lid Switch [LID]
478[ 0.633836] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
479[ 0.633913] ACPI: Power Button [PWRB]
480[ 0.634009] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
481[ 0.634085] ACPI: Sleep Button [SLPB]
482[ 0.634180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
483[ 0.634255] ACPI: Power Button [PWRF]
484[ 0.636815] brd: module loaded
485[ 0.638205] loop: module loaded
486[ 0.638331] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPCB.PMIO) (20180810/utaddress-213)
487[ 0.638601] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
488[ 0.638712] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000054B (\_SB.PCI0.LPCB.OGIO) (20180810/utaddress-213)
489[ 0.638904] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
490[ 0.639105] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000054B (\_SB.PCI0.LPCB.OGIO) (20180810/utaddress-213)
491[ 0.639244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
492[ 0.639360] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000054B (\_SB.PCI0.LPCB.OGIO) (20180810/utaddress-213)
493[ 0.639629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
494[ 0.639739] lpc_ich: Resource conflict(s) found affecting gpio_ich
495[ 0.639894] ahci 0000:00:1f.2: version 3.0
496[ 0.646849] battery: ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
497[ 0.646957] battery: ACPI: Battery Slot [CMB1] (battery present)
498[ 0.647063] battery: ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
499[ 0.647167] battery: ACPI: Battery Slot [CMB2] (battery absent)
500[ 0.650638] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
501[ 0.650719] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
502[ 0.654082] scsi host0: ahci
503[ 0.654240] scsi host1: ahci
504[ 0.654366] scsi host2: ahci
505[ 0.654499] scsi host3: ahci
506[ 0.654629] scsi host4: ahci
507[ 0.654752] scsi host5: ahci
508[ 0.654844] ata1: SATA max UDMA/133 abar m2048@0xe2728000 port 0xe2728100 irq 24
509[ 0.654917] ata2: DUMMY
510[ 0.654983] ata3: SATA max UDMA/133 abar m2048@0xe2728000 port 0xe2728200 irq 24
511[ 0.655056] ata4: DUMMY
512[ 0.655120] ata5: DUMMY
513[ 0.655185] ata6: DUMMY
514[ 0.655318] tun: Universal TUN/TAP device driver, 1.6
515[ 0.655423] PPP generic driver version 2.4.2
516[ 0.655583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
517[ 0.655656] ehci-pci: EHCI PCI platform driver
518[ 0.655838] ehci-pci 0000:00:1a.0: EHCI Host Controller
519[ 0.655932] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
520[ 0.656021] ehci-pci 0000:00:1a.0: debug port 2
521[ 0.659995] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
522[ 0.660004] ehci-pci 0000:00:1a.0: irq 23, io mem 0xe272a000
523[ 0.666594] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
524[ 0.666741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
525[ 0.666816] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
526[ 0.666889] usb usb1: Product: EHCI Host Controller
527[ 0.666958] usb usb1: Manufacturer: Linux 4.19.66-gentoo ehci_hcd
528[ 0.667029] usb usb1: SerialNumber: 0000:00:1a.0
529[ 0.667244] hub 1-0:1.0: USB hub found
530[ 0.667319] hub 1-0:1.0: 3 ports detected
531[ 0.667651] ehci-pci 0000:00:1d.0: EHCI Host Controller
532[ 0.667807] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
533[ 0.667895] ehci-pci 0000:00:1d.0: debug port 2
534[ 0.671865] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
535[ 0.671878] ehci-pci 0000:00:1d.0: irq 22, io mem 0xe2729000
536[ 0.678581] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
537[ 0.678691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
538[ 0.678774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
539[ 0.678847] usb usb2: Product: EHCI Host Controller
540[ 0.678916] usb usb2: Manufacturer: Linux 4.19.66-gentoo ehci_hcd
541[ 0.678987] usb usb2: SerialNumber: 0000:00:1d.0
542[ 0.679172] hub 2-0:1.0: USB hub found
543[ 0.679245] hub 2-0:1.0: 3 ports detected
544[ 0.679466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
545[ 0.679546] ohci-pci: OHCI PCI platform driver
546[ 0.679624] uhci_hcd: USB Universal Host Controller Interface driver
547[ 0.679773] xhci_hcd 0000:0b:00.0: xHCI Host Controller
548[ 0.679979] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
549[ 0.961548] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
550[ 0.962012] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
551[ 0.962181] ata1.00: supports DRM functions and may not be fully accessible
552[ 0.962546] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
553[ 0.963158] ata1.00: ATA-10: Crucial_CT250MX200SSD1, MU01, max UDMA/133
554[ 0.963318] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
555[ 0.963578] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
556[ 0.963959] ata3.00: ATA-8: Hitachi HTS547575A9E384, JE4OA60A, max UDMA/133
557[ 0.964106] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
558[ 0.965184] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
559[ 0.965554] ata3.00: configured for UDMA/133
560[ 0.967315] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
561[ 0.967482] ata1.00: supports DRM functions and may not be fully accessible
562[ 0.972560] ata1.00: configured for UDMA/133
563[ 0.972833] scsi 0:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU01 PQ: 0 ANSI: 5
564[ 0.973178] ata1.00: Enabling discard_zeroes_data
565[ 0.973205] sd 0:0:0:0: Attached scsi generic sg0 type 0
566[ 0.973391] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
567[ 0.973632] sd 0:0:0:0: [sda] 4096-byte physical blocks
568[ 0.973825] sd 0:0:0:0: [sda] Write Protect is off
569[ 0.973856] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54757 A60A PQ: 0 ANSI: 5
570[ 0.973974] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
571[ 0.974181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
572[ 0.974333] sd 2:0:0:0: Attached scsi generic sg1 type 0
573[ 0.974461] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
574[ 0.974554] ata1.00: Enabling discard_zeroes_data
575[ 0.974881] sd 2:0:0:0: [sdb] 4096-byte physical blocks
576[ 0.975043] sd 2:0:0:0: [sdb] Write Protect is off
577[ 0.975174] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
578[ 0.975199] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
579[ 0.975775] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
580[ 0.976206] ata1.00: Enabling discard_zeroes_data
581[ 0.976539] sd 0:0:0:0: [sda] Attached SCSI disk
582[ 0.991523] usb 1-1: new high-speed USB device number 2 using ehci-pci
583[ 0.998524] usb 2-1: new high-speed USB device number 2 using ehci-pci
584[ 1.121843] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
585[ 1.121982] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
586[ 1.122358] hub 1-1:1.0: USB hub found
587[ 1.122593] hub 1-1:1.0: 6 ports detected
588[ 1.127841] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
589[ 1.127985] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
590[ 1.128233] hub 2-1:1.0: USB hub found
591[ 1.128463] hub 2-1:1.0: 8 ports detected
592[ 1.281541] xhci_hcd 0000:0b:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
593[ 1.281854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
594[ 1.281929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
595[ 1.282002] usb usb3: Product: xHCI Host Controller
596[ 1.282071] usb usb3: Manufacturer: Linux 4.19.66-gentoo xhci-hcd
597[ 1.282141] usb usb3: SerialNumber: 0000:0b:00.0
598[ 1.282348] hub 3-0:1.0: USB hub found
599[ 1.282425] hub 3-0:1.0: 2 ports detected
600[ 1.282591] xhci_hcd 0000:0b:00.0: xHCI Host Controller
601[ 1.282686] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
602[ 1.282762] xhci_hcd 0000:0b:00.0: Host supports USB 3.0 SuperSpeed
603[ 1.284988] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
604[ 1.285075] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
605[ 1.285150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
606[ 1.285223] usb usb4: Product: xHCI Host Controller
607[ 1.285292] usb usb4: Manufacturer: Linux 4.19.66-gentoo xhci-hcd
608[ 1.285363] usb usb4: SerialNumber: 0000:0b:00.0
609[ 1.285499] hub 4-0:1.0: USB hub found
610[ 1.285580] hub 4-0:1.0: 2 ports detected
611[ 1.285744] usbcore: registered new interface driver usblp
612[ 1.285825] usbcore: registered new interface driver uas
613[ 1.285917] usbcore: registered new interface driver usb-storage
614[ 1.286041] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
615[ 1.288339] i8042: Detected active multiplexing controller, rev 1.1
616[ 1.290014] serio: i8042 KBD port at 0x60,0x64 irq 1
617[ 1.290104] serio: i8042 AUX0 port at 0x60,0x64 irq 12
618[ 1.290188] serio: i8042 AUX1 port at 0x60,0x64 irq 12
619[ 1.290272] serio: i8042 AUX2 port at 0x60,0x64 irq 12
620[ 1.290355] serio: i8042 AUX3 port at 0x60,0x64 irq 12
621[ 1.290481] mousedev: PS/2 mouse device common for all mice
622[ 1.290725] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
623[ 1.290816] rtc_cmos 00:04: RTC can wake from S4
624[ 1.291042] rtc_cmos 00:04: registered as rtc0
625[ 1.291124] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
626[ 1.291215] i2c /dev entries driver
627[ 1.291420] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
628[ 1.292235] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
629[ 1.292336] usbcore: registered new interface driver btusb
630[ 1.292410] intel_pstate: Intel P-state driver initializing
631[ 1.292571] hidraw: raw HID events driver (C) Jiri Kosina
632[ 1.292741] usbcore: registered new interface driver usbhid
633[ 1.292842] usbhid: USB HID core driver
634[ 1.294400] NET: Registered protocol family 17
635[ 1.294503] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
636[ 1.294609] Bluetooth: BNEP filters: protocol multicast
637[ 1.294706] Bluetooth: BNEP socket layer initialized
638[ 1.294890] Key type dns_resolver registered
639[ 1.295443] mce: Using 7 MCE banks
640[ 1.295619] microcode: sig=0x206a7, pf=0x10, revision=0x1a
641[ 1.295805] microcode: Microcode Update Driver: v2.2.
642[ 1.295822] AVX version of gcm_enc/dec engaged.
643[ 1.296006] AES CTR mode by8 optimization enabled
644[ 1.297816] sched_clock: Marking stable (1288655956, 9146603)->(1316415647, -18613088)
645[ 1.298403] registered taskstats version 1
646[ 1.299090] Loading compiled-in X.509 certificates
647[ 1.299730] Btrfs loaded, crc32c=crc32c-intel
648[ 1.300155] Key type encrypted registered
649[ 1.300968] cfg80211: Loading compiled-in X.509 certificates for regulatory database
650[ 1.302276] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
651[ 1.302385] ALSA device list:
652[ 1.302507] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
653[ 1.302663] cfg80211: failed to load regulatory.db
654[ 1.302780] No soundcards found.
655[ 1.323896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
656[ 1.376617] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
657[ 1.384615] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
658[ 1.457226] usb 1-1.1: New USB device found, idVendor=08ff, idProduct=2683, bcdDevice=21.00
659[ 1.457350] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
660[ 1.457458] usb 1-1.1: Product: Fingerprint Sensor
661[ 1.508849] usb 2-1.1: New USB device found, idVendor=04f2, idProduct=b241, bcdDevice=93.52
662[ 1.508963] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
663[ 1.509064] usb 2-1.1: Product: FJ Camera
664[ 1.509155] usb 2-1.1: Manufacturer: Chicony Electronics Co., Ltd.
665[ 1.577583] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
666[ 1.608616] tsc: Refined TSC clocksource calibration: 2693.879 MHz
667[ 1.608739] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a7f100e, max_idle_ns: 440795249411 ns
668[ 1.608957] clocksource: Switched to clocksource tsc
669[ 1.658871] usb 2-1.2: New USB device found, idVendor=056a, idProduct=00e6, bcdDevice= 2.23
670[ 1.658987] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
671[ 1.659088] usb 2-1.2: Product: ISD-V4
672[ 1.659178] usb 2-1.2: Manufacturer: Tablet
673[ 1.666298] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:056A:00E6.0001/input/input11
674[ 1.666766] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:056A:00E6.0001/input/input12
675[ 1.667215] hid-generic 0003:056A:00E6.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.2/input0
676[ 1.675210] input: Tablet ISD-V4 Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:056A:00E6.0002/input/input13
677[ 1.675622] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:056A:00E6.0002/input/input14
678[ 1.675929] input: Tablet ISD-V4 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:056A:00E6.0002/input/input15
679[ 1.676285] hid-generic 0003:056A:00E6.0002: input,hiddev97,hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.2/input1
680[ 1.726773] sdb: sdb1 sdb2 sdb3
681[ 1.728055] sd 2:0:0:0: [sdb] Attached SCSI disk
682[ 1.728751] REISERFS (device sda9): found reiserfs format "3.6" with standard journal
683[ 1.728870] REISERFS (device sda9): using ordered data mode
684[ 1.728965] reiserfs: using flush barriers
685[ 1.729340] REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
686[ 1.730114] REISERFS (device sda9): checking transaction log (sda9)
687[ 1.732135] REISERFS (device sda9): Using r5 hash to sort names
688[ 1.732275] VFS: Mounted root (reiserfs filesystem) readonly on device 8:9.
689[ 1.734600] Freeing unused kernel image memory: 1208K
690[ 1.734782] Write protecting the kernel read-only data: 20480k
691[ 1.736218] Freeing unused kernel image memory: 1984K
692[ 1.736764] Freeing unused kernel image memory: 684K
693[ 1.737024] Run /sbin/init as init process
694[ 1.740526] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
695[ 1.741700] random: fast init done
696[ 1.819128] usb 2-1.3: New USB device found, idVendor=0b97, idProduct=7761, bcdDevice= 1.10
697[ 1.819234] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
698[ 1.819628] hub 2-1.3:1.0: USB hub found
699[ 1.819870] hub 2-1.3:1.0: 4 ports detected
700[ 1.884538] usb 2-1.4: new full-speed USB device number 6 using ehci-pci
701[ 1.966451] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e031, bcdDevice= 1.12
702[ 1.966559] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
703[ 1.966636] usb 2-1.4: Product: BCM20702A0
704[ 1.966706] usb 2-1.4: Manufacturer: Broadcom Corp
705[ 1.966776] usb 2-1.4: SerialNumber: 3859F9F1C7A4
706[ 2.031548] usb 2-1.6: new high-speed USB device number 7 using ehci-pci
707[ 2.074338] Bluetooth: hci0: BCM: chip id 20
708[ 2.075331] Bluetooth: hci0: BCM: features 0x07
709[ 2.091352] Bluetooth: hci0: BCM20702A
710[ 2.092353] Bluetooth: hci0: BCM20702A0 (001.001.024) build 0000
711[ 2.092623] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e031.hcd failed with error -2
712[ 2.092741] Bluetooth: hci0: BCM: Patch brcm/BCM20702A0-0489-e031.hcd not found
713[ 2.113315] usb 2-1.6: New USB device found, idVendor=1199, idProduct=9011, bcdDevice= 0.02
714[ 2.113395] usb 2-1.6: New USB device strings: Mfr=3, Product=2, SerialNumber=0
715[ 2.113469] usb 2-1.6: Product: MC8305
716[ 2.113543] usb 2-1.6: Manufacturer: Sierra Wireless Inc
717[ 2.173529] usb 2-1.3.2: new full-speed USB device number 8 using ehci-pci
718[ 2.227752] random: lvm: uninitialized urandom read (4 bytes read)
719[ 2.237318] random: lvm: uninitialized urandom read (4 bytes read)
720[ 2.252442] usb 2-1.3.2: New USB device found, idVendor=0b97, idProduct=7772, bcdDevice= 1.10
721[ 2.252565] usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
722[ 2.252648] usb 2-1.3.2: Product: O2Micro CCID SC Reader
723[ 2.252724] usb 2-1.3.2: Manufacturer: O2
724[ 2.341387] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
725[ 3.124696] systemd-udevd[2018]: GOTO 'libmtp_rules_end' has no matching label in: '/etc/udev/rules.d/10-local.rules'
726[ 3.125906] systemd-udevd[2018]: /etc/udev/rules.d/50-brother-brscan4-libsane-type1.rules:9: Unknown key 'SYSFS{idVendor}'
727[ 3.167032] systemd-udevd[2018]: GOTO 'libmtp_rules_end' has no matching label in: '/etc/udev/rules.d/10-local.rules'
728[ 3.167226] systemd-udevd[2018]: /etc/udev/rules.d/50-brother-brscan4-libsane-type1.rules:9: Unknown key 'SYSFS{idVendor}'
729[ 3.215940] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT]
730[ 3.216207] ACPI: \_SB_.FEXT: BTNI: [0xf0001]
731[ 3.216251] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input17
732[ 3.217459] fujitsu_laptop: driver 0.6.0 successfully loaded
733[ 3.237434] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input16
734[ 3.240253] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
735[ 3.245396] pps_core: LinuxPPS API ver. 1 registered
736[ 3.245398] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
737[ 3.255305] PTP clock support registered
738[ 3.281133] tpm tpm0: TPM is disabled/deactivated (0x7)
739[ 3.295603] Intel(R) Wireless WiFi driver for Linux
740[ 3.295604] Copyright(c) 2003- 2015 Intel Corporation
741[ 3.295783] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
742[ 3.305856] sdhci: Secure Digital Host Controller Interface driver
743[ 3.305857] sdhci: Copyright(c) Pierre Ossman
744[ 3.324356] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
745[ 3.324357] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
746[ 3.324502] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
747[ 3.334342] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
748[ 3.349605] sdhci-pci 0000:0c:00.1: SDHCI controller found [1217:8320] (rev 5)
749[ 3.350003] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
750[ 3.353620] mmc0: SDHCI controller on PCI [0000:0c:00.1] using DMA
751[ 3.381657] fuse init (API version 7.27)
752[ 3.399864] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
753[ 3.399866] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
754[ 3.399867] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
755[ 3.399869] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
756[ 3.431082] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
757[ 3.558143] [drm] Replacing VGA console driver
758[ 3.558555] Console: switching to colour dummy device 80x25
759[ 3.558590] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override.
760[ 3.559292] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
761[ 3.559293] [drm] Driver supports precise vblank timestamp query.
762[ 3.560026] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
763[ 3.586171] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
764[ 3.586784] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
765[ 3.587532] acpi device:03: registered as cooling_device4
766[ 3.587586] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
767[ 3.587708] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
768[ 3.604521] systemd-udevd[2075]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
769[ 3.659644] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
770[ 3.680953] reiserfs: enabling write barrier flush mode
771[ 3.692329] fbcon: inteldrmfb (fb0) is primary device
772[ 3.762968] systemd-udevd[2075]: Using default interface naming scheme 'v240'.
773[ 3.764796] systemd-udevd[2075]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
774[ 3.764913] iwlwifi 0000:0a:00.0 wlp10s0: renamed from wlan0
775[ 3.797978] systemd-udevd[2075]: Process 'net.sh wlp10s0 start' failed with exit code 1.
776[ 3.800290] systemd-udevd[2057]: Using default interface naming scheme 'v240'.
777[ 3.829827] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 8c:73:6e:ff:86:56
778[ 3.829833] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
779[ 3.829865] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
780[ 3.840698] systemd-udevd[2059]: Using default interface naming scheme 'v240'.
781[ 3.850119] e1000e 0000:00:19.0 enp0s25: renamed from eth0
782[ 3.962087] psmouse serio4: synaptics: queried max coordinates: x [..5574], y [..4726]
783[ 3.979246] random: crng init done
784[ 4.026625] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x180b1, caps: 0xd04731/0xa42000/0xa0000/0x0, board id: 0, fw id: 631307
785[ 4.067658] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input18
786[ 4.207414] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
787[ 4.207415] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
788[ 4.207416] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
789[ 4.207417] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
790[ 4.207418] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
791[ 4.207418] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
792[ 4.208393] CPU2: Core temperature/speed normal
793[ 4.208393] CPU3: Core temperature/speed normal
794[ 4.208394] CPU1: Package temperature/speed normal
795[ 4.208395] CPU0: Package temperature/speed normal
796[ 4.208396] CPU2: Package temperature/speed normal
797[ 4.208396] CPU3: Package temperature/speed normal
798[ 4.457454] usbcore: registered new interface driver qcserial
799[ 4.457464] usbserial: USB Serial support registered for Qualcomm USB modem
800[ 4.459056] qcserial 2-1.6:1.1: Qualcomm USB modem converter detected
801[ 4.459127] usb 2-1.6: Qualcomm USB modem converter now attached to ttyUSB0
802[ 4.464528] qcserial 2-1.6:1.2: Qualcomm USB modem converter detected
803[ 4.464602] usb 2-1.6: Qualcomm USB modem converter now attached to ttyUSB1
804[ 4.466301] qcserial 2-1.6:1.3: Qualcomm USB modem converter detected
805[ 4.466361] usb 2-1.6: Qualcomm USB modem converter now attached to ttyUSB2
806[ 4.884651] Console: switching to colour frame buffer device 160x50
807[ 4.904128] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
808[ 4.924750] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x90970130
809[ 4.925048] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
810[ 4.925049] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
811[ 4.925051] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x1a/0x21/0x0/0x0/0x0)
812[ 4.925052] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
813[ 4.925053] snd_hda_codec_realtek hdaudioC0D0: inputs:
814[ 4.925055] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
815[ 4.925056] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
816[ 4.939485] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
817[ 4.939488] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
818[ 4.939489] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
819[ 4.939490] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0
820[ 4.939491] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6
821[ 4.939492] snd_hda_codec_generic hdaudioC0D3: inputs:
822[ 4.941113] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
823[ 4.941160] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
824[ 4.941204] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
825[ 4.941249] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
826[ 4.941292] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
827[ 4.999348] Adding 4194300k swap on /dev/sda10. Priority:-2 extents:1 across:4194300k SS
828[ 5.105771] REISERFS (device sdb3): found reiserfs format "3.6" with standard journal
829[ 5.105787] REISERFS (device sdb3): using ordered data mode
830[ 5.105788] reiserfs: using flush barriers
831[ 5.109602] REISERFS (device sdb3): journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
832[ 5.109845] REISERFS (device sdb3): checking transaction log (sdb3)
833[ 5.214528] REISERFS (device sdb3): Using r5 hash to sort names