· 6 years ago · Jan 18, 2020, 11:06 PM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-2713) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:47:42 PST 2019
3[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
4[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
5[ 0.000000] OF: fdt: - 80000000 , 7ee00000
6[ 0.000000] OF: fdt: - 100000000 , 7f200000
7[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
8[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
9[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
10[ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
11[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
12[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
13[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
14[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
15[ 0.000000] On node 0 totalpages: 1039872
16[ 0.000000] DMA zone: 8192 pages used for memmap
17[ 0.000000] DMA zone: 0 pages reserved
18[ 0.000000] DMA zone: 519168 pages, LIFO batch:31
19[ 0.000000] Normal zone: 8136 pages used for memmap
20[ 0.000000] Normal zone: 520704 pages, LIFO batch:31
21[ 0.000000] psci: probing for conduit method from DT.
22[ 0.000000] psci: PSCIv1.0 detected in firmware.
23[ 0.000000] psci: Using standard PSCI v0.2 function IDs
24[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
25[ 0.000000] psci: SMC Calling Convention v1.1
26[ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb2000 s61592 r8192 d32616 u102400
27[ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096
28[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
29[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
30[ 0.000000] Speculative Store Bypass Disable mitigation not required
31[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
32[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1
33[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
34[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
35[ 0.000000] log_buf_len min size: 32768 bytes
36[ 0.000000] log_buf_len: 131072 bytes
37[ 0.000000] early log buf free: 29436(89%)
38[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
39[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
40[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
41[ 0.000000] Memory: 3570416K/4159488K available (15230K kernel code, 2926K rwdata, 6620K rodata, 8576K init, 609K bss, 113936K reserved, 475136K cma-reserved)
42[ 0.000000] Virtual kernel memory layout:
43[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
44[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
45[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f60000 ( 15232 KB)
46[ 0.000000] .rodata : 0xffffff8008f60000 - 0xffffff80095e0000 ( 6656 KB)
47[ 0.000000] .init : 0xffffff80095e0000 - 0xffffff8009e40000 ( 8576 KB)
48[ 0.000000] .data : 0xffffff8009e40000 - 0xffffff800a11b808 ( 2927 KB)
49[ 0.000000] .bss : 0xffffff800a11b808 - 0xffffff800a1b3dbc ( 610 KB)
50[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
51[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
52[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
53[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
54[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
55[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
56[ 0.000000] Preemptible hierarchical RCU implementation.
57[ 0.000000] Build-time adjustment of leaf fanout to 64.
58[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
59[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
60[ 0.000000] NR_IRQS:64 nr_irqs:64 0
61[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
62[ 0.000000] t210 clock and reset probe
63[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
64[ 0.000000] clk_cbus_recalc_rate: no gbus parent
65[ 0.000000] clk_cbus_recalc_rate: no gbus parent
66[ 0.000000] clk_cbus_recalc_rate: no gbus parent
67[ 0.000000] clk_cbus_recalc_rate: no gbus parent
68[ 0.000000] clk_cbus_recalc_rate: no gbus parent
69[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
70[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
71[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
72[ 0.001778] Console: colour dummy device 80x25
73[ 0.002620] console [tty0] enabled
74[ 0.002646] kmemleak: Kernel memory leak detector disabled
75[ 0.002676] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
76[ 0.002707] pid_max: default: 32768 minimum: 301
77[ 0.003165] Security Framework initialized
78[ 0.003398] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
79[ 0.003419] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
80[ 0.004627] ftrace: allocating 47001 entries in 184 pages
81[ 0.176557] sched-energy: CPU device node has no sched-energy-costs
82[ 0.176591] ASID allocator initialised with 65536 entries
83[ 0.215853] tegra-id: chipid=22117.
84[ 0.215900] tegra-id: opt_subrevision=0.
85[ 0.215930] Tegra Speedo/IDDQ fuse revision 4
86[ 0.215945] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
87[ 0.215961] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0
88[ 0.215977] Tegra: CPU Speedo Value 2112, SoC Speedo Value 2025, GPU Speedo Value 2133
89[ 0.215998] Tegra: CPU IDDQ Value 2424, SoC IDDQ Value 2772, GPU IDDQ Value 3435
90[ 0.216033] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1
91[ 0.216058] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts
92[ 0.216093] DTB Build time: Dec 9 2019 22:51:55
93[ 0.265035] CPU1: Booted secondary processor [411fd071]
94[ 0.296973] CPU2: Booted secondary processor [411fd071]
95[ 0.328943] CPU3: Booted secondary processor [411fd071]
96[ 0.329036] Brought up 4 CPUs
97[ 0.329102] SMP: Total of 4 processors activated.
98[ 0.329120] CPU features: detected feature: 32-bit EL0 Support
99[ 0.329393] CPU: All CPU(s) started at EL2
100[ 0.329425] alternatives: patching kernel code
101[ 0.337490] devtmpfs: initialized
102[ 0.374404] Initilizing CustomIPI irq domain
103[ 0.374825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
104[ 0.374871] futex hash table entries: 1024 (order: 4, 65536 bytes)
105[ 0.385371] pinctrl core: initialized pinctrl subsystem
106[ 0.386052] OS set in device tree is not L4T.
107[ 0.386471] regulator-dummy: no parameters
108[ 0.386775] Initializing plugin-manager
109[ 0.386890] Plugin module not found
110[ 0.387130] node /plugin-manager/fragement@0 match with board >=3448-0002-100
111[ 0.387695] node /plugin-manager/fragment@1 match with board >=3448-0002-101
112[ 0.388206] node /plugin-manager/fragment@3 match with board >=3448-0002-100
113[ 0.388903] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt
114[ 0.389390] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt
115[ 0.390040] node /plugin-manager/fragement@10 match with board >=3448-0002-300
116[ 0.392105] node /plugin-manager/fragement@11 match with board >=3448-0002-300
117[ 0.395558] NET: Registered protocol family 16
118[ 0.399217] pstore: using zlib compression
119[ 0.399892] console [pstore-1] enabled
120[ 0.399909] pstore: Registered ramoops as persistent store backend
121[ 0.399927] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
122[ 0.413053] cpuidle: using governor menu
123[ 0.417454] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
124[ 0.419106] vdso: 2 pages (1 code @ ffffff8008f67000, 1 data @ ffffff8009e44000)
125[ 0.419151] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
126[ 0.421511] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
127[ 0.424203] tegra_powergate_init: DONE
128[ 0.424244] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts
129[ 0.424282] DTB Build time: Dec 9 2019 22:51:55
130[ 0.426087] Tegra reboot handler registered.
131[ 0.430648] iommu: Adding device tegra-carveouts to group 0
132[ 0.430816] platform tegra-carveouts: domain=ffffffc0f9b7b318 allocates as[0]=ffffffc0f9bd40a8
133[ 0.431189] iommu: Adding device smmu_test to group 1
134[ 0.431255] platform smmu_test: domain=ffffffc0f9b7b558 allocates as[0]=ffffffc0f9bd4110
135[ 0.432069] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
136[ 0.432143] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
137[ 0.432215] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
138[ 0.432240] nv-tegra-mc 70019000.mc: No mssnvlink node
139[ 0.432278] mc-err: mcerr ops are set to t21x
140[ 0.442075] iommu: Adding device 70090000.xusb to group 2
141[ 0.442396] iommu: Adding device 70006000.serial to group 3
142[ 0.442497] platform 70006000.serial: domain=ffffffc0f94b6618 allocates as[0]=ffffffc0f9bd4178
143[ 0.442939] iommu: Adding device 70006040.serial to group 4
144[ 0.443235] iommu: Adding device 70006200.serial to group 5
145[ 0.443476] iommu: Adding device sound to group 6
146[ 0.443547] platform sound: domain=ffffffc0f94b6b58 allocates as[0]=ffffffc0f9bd41e0
147[ 0.444130] iommu: Adding device 7000d400.spi to group 7
148[ 0.444410] iommu: Adding device 7000d600.spi to group 8
149[ 0.444778] iommu: Adding device 50000000.host1x to group 9
150[ 0.445229] iommu: Adding device 54080000.vi to group 10
151[ 0.445654] iommu: Adding device 54600000.isp to group 11
152[ 0.445937] iommu: Adding device 54680000.isp to group 12
153[ 0.446225] iommu: Adding device tegradc.0 to group 13
154[ 0.446316] platform tegradc.0: domain=ffffffc0f94c3918 allocates as[0]=ffffffc0f9bd4248
155[ 0.446855] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
156[ 0.447203] iommu: Adding device tegradc.1 to group 14
157[ 0.447273] platform tegradc.1: domain=ffffffc0f94c3b58 allocates as[0]=ffffffc0f9bd42b0
158[ 0.447797] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
159[ 0.448052] iommu: Adding device 54340000.vic to group 15
160[ 0.448270] iommu: Adding device 544c0000.nvenc to group 16
161[ 0.448486] iommu: Adding device 54500000.tsec to group 17
162[ 0.448703] iommu: Adding device 54100000.tsecb to group 18
163[ 0.448919] iommu: Adding device 54480000.nvdec to group 19
164[ 0.449151] iommu: Adding device 54380000.nvjpg to group 20
165[ 0.450256] iommu: Adding device 546c0000.i2c to group 21
166[ 0.450604] iommu: Adding device 57000000.gpu to group 22
167[ 0.450672] platform 57000000.gpu: domain=ffffffc0f94cdb58 allocates as[0]=ffffffc0f9bd4318
168[ 0.450727] platform 57000000.gpu: domain=ffffffc0f94cdb58 allocates as[1]=ffffffc0f9bd4380
169[ 0.450788] platform 57000000.gpu: domain=ffffffc0f94cdb58 allocates as[2]=ffffffc0f9bd43e8
170[ 0.450846] platform 57000000.gpu: domain=ffffffc0f94cdb58 allocates as[3]=ffffffc0f9bd4450
171[ 0.451731] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
172[ 0.451772] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
173[ 0.451800] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
174[ 0.451821] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
175[ 0.451839] tegra-pmc: ### PMC reset status reg: 0x3
176[ 0.501140] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
177[ 0.501178] tegra-pmc: Clear bootloader IO dpd settings
178[ 0.501209] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
179[ 0.501288] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
180[ 0.501604] iommu: Adding device 70012000.se to group 23
181[ 0.502401] iommu: Adding device 7000c000.i2c to group 24
182[ 0.502679] iommu: Adding device 7000c400.i2c to group 25
183[ 0.502944] iommu: Adding device 7000c500.i2c to group 26
184[ 0.503221] iommu: Adding device 7000c700.i2c to group 27
185[ 0.503487] iommu: Adding device 7000d000.i2c to group 28
186[ 0.503778] iommu: Adding device 7000d100.i2c to group 29
187[ 0.504053] iommu: Adding device sdhci-tegra.3 to group 30
188[ 0.504124] platform sdhci-tegra.3: domain=ffffffc0f956dcd8 allocates as[0]=ffffffc0f9bd44b8
189[ 0.505023] iommu: Adding device 700d0000.xudc to group 31
190[ 0.508402] vdd-ac-bat: 5000 mV
191[ 0.508788] vdd-5v0-sys: 5000 mV
192[ 0.509782] vdd-5v0-hdmi: supplied by vdd-5v0-sys
193[ 0.509878] vdd-5v0-hdmi: 5000 mV
194[ 0.510280] vdd-1v8-sys: 1800 mV
195[ 0.510688] vdd-fan: supplied by vdd-5v0-sys
196[ 0.510739] vdd-fan: 5000 mV
197[ 0.511137] vdd-usb-vbus: supplied by vdd-5v0-sys
198[ 0.511210] vdd-usb-vbus: 5000 mV
199[ 0.511744] vdd-usb-vbus2: 5000 mV
200[ 0.541780] HugeTLB registered 2 MB page size, pre-allocated 0 pages
201[ 0.544172] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip
202[ 0.545343] GPIO line 151 (camera-control-output-low) hogged as output/low
203[ 0.545381] GPIO line 152 (camera-control-output-low) hogged as output/low
204[ 0.545429] GPIO line 6 (system-suspend-gpio) hogged as output/high
205[ 0.545778] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
206[ 0.553832] eventlib_kernel: keventlib is initialized, test id: 0
207[ 0.554214] SCSI subsystem initialized
208[ 0.554448] libata version 3.00 loaded.
209[ 0.554712] usbcore: registered new interface driver usbfs
210[ 0.554787] usbcore: registered new interface driver hub
211[ 0.554873] usbcore: registered new device driver usb
212[ 0.558804] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
213[ 0.564392] vdd-core: 600 <--> 1162 mV at 1075 mV
214[ 0.565237] random: fast init done
215[ 0.565386] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
216[ 0.568240] vdd-ddr-1v1: 1150 mV
217[ 0.572412] vdd-pre-reg-1v35: 1350 mV
218[ 0.576235] vdd-1v8: 1800 mV
219[ 0.580281] avdd-sys-1v2: 1200 mV
220[ 0.584235] vdd-pex-1v0: 1050 mV
221[ 0.584915] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
222[ 0.585479] max77620-ldo3: at 3100 mV
223[ 0.588246] vdd-rtc: 850 <--> 1100 mV at 1000 mV
224[ 0.588794] max77620-ldo5: at 3100 mV
225[ 0.592239] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV
226[ 0.596260] avdd-1v05-pll: 1050 mV
227[ 0.600235] avdd-io-hdmi-dp: 1050 mV
228[ 0.602697] GPIO line 505 (spmic-default-output-high) hogged as output/high
229[ 0.603022] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
230[ 0.603329] max77620 4-003c: max77620 probe successful
231[ 0.606049] media: Linux media interface: v0.10
232[ 0.606125] Linux video capture interface: v2.00
233[ 0.607070] pps_core: LinuxPPS API ver. 1 registered
234[ 0.607098] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
235[ 0.607137] PTP clock support registered
236[ 0.610687] tegra_fiq_debugger_init: found FIQ source (IRQ 97)
237[ 0.617043] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
238[ 0.617877] Advanced Linux Sound Architecture Driver Initialized.
239[ 0.618535] Bluetooth: Core ver 2.22
240[ 0.618605] NET: Registered protocol family 31
241[ 0.618623] Bluetooth: HCI device and connection manager initialized
242[ 0.618652] Bluetooth: HCI socket layer initialized
243[ 0.618674] Bluetooth: L2CAP socket layer initialized
244[ 0.618713] Bluetooth: SCO socket layer initialized
245[ 0.620423] tegra210_dvfs: no clock found for sdmmc2_ddr
246[ 0.620460] tegra210_dvfs: no clock found for sdmmc4_ddr
247[ 0.620521] tegra210_dvfs: no clock found for sdmmc1_ddr
248[ 0.620548] tegra210_dvfs: no clock found for sdmmc3_ddr
249[ 0.623657] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
250[ 0.624953] vdd-3v3-sys: supplied by vdd-5v0-sys
251[ 0.625057] vdd-3v3-sys: 3300 mV
252[ 0.625357] vdd-1v8-sys: supplied by vdd-3v3-sys
253[ 0.628303] vdd-usb-vbus2: supplied by vdd-3v3-sys
254[ 0.628771] vdd-3v3-sd: supplied by vdd-3v3-sys
255[ 0.628833] vdd-3v3-sd: 3300 mV
256[ 0.629735] avdd-io-edp-1v05: supplied by avdd-1v05-pll
257[ 0.629794] avdd-io-edp-1v05: 1050 mV
258[ 0.630251] vdd-usb-hub-en: supplied by vdd-1v8-sys
259[ 0.630311] vdd-usb-hub-en: 5000 mV
260[ 0.631606] camchar: rtcpu character device driver loaded
261[ 0.632370] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
262[ 0.633777] clocksource: Switched to clocksource arch_sys_counter
263[ 0.673759] VFS: Disk quotas dquot_6.6.0
264[ 0.673983] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
265[ 0.674482] nvmap_heap_init: nvmap_heap_init: created heap block cache
266[ 0.674929] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
267[ 0.674980] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
268[ 0.675221] cma: enabled page replacement for spfn=d7000, epfn=f0000
269[ 0.675249] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
270[ 0.675279] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
271[ 0.675332] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
272[ 0.675362] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
273[ 0.675395] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
274[ 0.675419] nvmap_page_pool_init: Total RAM pages: 1011388
275[ 0.675436] nvmap_page_pool_init: nvmap page pool size: 126423 pages (493 MB)
276[ 0.675600] nvmap_background_zero_thread: PP zeroing thread starting.
277[ 0.675890] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
278[ 0.676629] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
279[ 0.686625] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
280[ 0.687068] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
281[ 0.687331] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
282[ 0.687556] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
283[ 0.687753] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
284[ 0.688041] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
285[ 0.688062] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
286[ 0.688511] NET: Registered protocol family 2
287[ 0.689489] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
288[ 0.689729] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
289[ 0.690278] TCP: Hash tables configured (established 32768 bind 32768)
290[ 0.690457] UDP hash table entries: 2048 (order: 4, 65536 bytes)
291[ 0.690555] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
292[ 0.690981] NET: Registered protocol family 1
293[ 0.691756] RPC: Registered named UNIX socket transport module.
294[ 0.691784] RPC: Registered udp transport module.
295[ 0.691800] RPC: Registered tcp transport module.
296[ 0.691817] RPC: Registered tcp NFSv4.1 backchannel transport module.
297[ 0.691844] PCI: CLS 0 bytes, default 64
298[ 0.692068] Trying to unpack rootfs image as initramfs...
299[ 0.923732] Freeing initrd memory: 5356K
300[ 0.933669] host1x 50000000.host1x: initialized
301[ 0.935592] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
302[ 0.938818] audit: initializing netlink subsys (disabled)
303[ 0.938918] audit: type=2000 audit(0.791:1): initialized
304[ 0.939679] workingset: timestamp_bits=46 max_order=20 bucket_order=0
305[ 0.949697] squashfs: version 4.0 (2009/01/31) Phillip Lougher
306[ 0.951302] ntfs: driver 2.1.32 [Flags: R/W].
307[ 0.952132] 9p: Installing v9fs 9p2000 file system support
308[ 0.955567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
309[ 0.955752] io scheduler noop registered
310[ 0.956082] io scheduler cfq registered (default)
311[ 0.958796] gic 702f9000.agic: GIC IRQ controller registered
312[ 0.962300] iommu: Adding device 702ef000.adsp to group 32
313[ 0.971179] iommu: Adding device aconnect@702c0000:adsp_audio to group 33
314[ 0.971373] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
315[ 0.971996] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x9a09411
316[ 0.972028] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
317[ 0.973667] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
318[ 0.973841] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
319[ 0.973963] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
320[ 0.974177] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
321[ 0.974289] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
322[ 0.974406] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
323[ 0.974515] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
324[ 0.974634] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
325[ 0.974740] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
326[ 0.974847] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
327[ 0.980929] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
328[ 0.982745] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
329[ 0.984649] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
330[ 0.986143] tegra-pcie 1003000.pcie: PCIE: Enable power rails
331[ 0.986516] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
332[ 0.987724] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
333[ 0.987970] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
334[ 0.988259] Adding domain tsec-pd to PM domain host1x-pd
335[ 0.990572] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
336[ 0.991526] tsec 54500000.tsec: initialized
337[ 0.993082] tsec 54100000.tsecb: initialized
338[ 0.993816] Adding domain nvdec-pd to PM domain host1x-pd
339[ 0.997171] nvdec 54480000.nvdec: initialized
340[ 0.998329] Adding domain vic03-pd to PM domain host1x-pd
341[ 0.998536] Adding domain msenc-pd to PM domain host1x-pd
342[ 0.998712] Adding domain nvjpg-pd to PM domain host1x-pd
343[ 1.002898] falcon 54340000.vic: initialized
344[ 1.004176] falcon 544c0000.nvenc: initialized
345[ 1.005488] falcon 54380000.nvjpg: initialized
346[ 1.009847] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=96
347[ 1.009942] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
348[ 1.009989] tegra_cec 70015000.tegra_cec: tegra_cec_init started
349[ 1.010187] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
350[ 1.010303] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
351[ 1.010325] tegra_cec 70015000.tegra_cec: probed
352[ 1.010332] display board info: id 0x0, fab 0x0
353[ 1.010404] generic_infoframe_type: 0x87
354[ 1.010568] tegradc tegradc.0: DT parsed successfully
355[ 1.010629] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
356[ 1.018142] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
357[ 1.018999] tegradc tegradc.0: probed
358[ 1.019780] Console: switching to colour frame buffer device 80x30
359[ 1.019845] tegradc tegradc.0: fb registered
360[ 1.021302] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
361[ 1.021406] tegradc tegradc.1: No lt-data, using default setting
362[ 1.021453] tegradc tegradc.1: No hpd-gpio in DT
363[ 1.021500] tegradc tegradc.1: DT parsed successfully
364[ 1.021564] tegradc tegradc.1: Display dc.ffffff800acc0000 registered with id=1
365[ 1.023190] tegradc tegradc.1: dpd enable lookup fail:-19
366[ 1.024466] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels
367[ 1.025317] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
368[ 1.025691] kfuse 7000fc00.kfuse: initialized
369[ 1.026619] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
370[ 1.529344] Host read timeout at address 545c00c4
371[ 1.530124] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
372[ 1.530532] tegradc tegradc.1: probed
373[ 1.530922] tegradc tegradc.1: fb registered
374[ 1.531361] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
375[ 1.531436] vdd-cpu: 708 <--> 1322 mV at 708 mV
376[ 1.531824] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
377[ 1.533001] vdd-gpu: applied init 1000000uV constraint
378[ 1.533023] vdd-gpu: 708 <--> 1323 mV at 997 mV
379[ 1.533410] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
380[ 1.534157] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
381[ 1.534186] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
382[ 1.534207] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
383[ 1.534234] tegradc tegradc.1: blank - powerdown
384[ 1.534265] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
385[ 1.534282] Extcon DP: HPD disabled
386[ 1.534296] hpd: hpd_switch 0
387[ 1.534308] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
388[ 1.534329] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
389[ 1.534346] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
390[ 1.537163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
391[ 1.537284] No Device Node present for smmu client: serial8250 !!
392[ 1.537307] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
393[ 1.537359] iommu: Adding device serial8250 to group 34
394[ 1.539722] console [ttyS0] disabled
395[ 1.539852] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
396[ 2.033852] tegra_cec 70015000.tegra_cec: Can't find physical addresse.
397[ 2.033857] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
398[ 2.345308] tegra-pcie 1003000.pcie: link 0 down, retrying
399[ 3.075569] tegra-pcie 1003000.pcie: link 0 down, retrying
400[ 3.479850] tegra-pcie 1003000.pcie: link 0 down, retrying
401[ 3.481868] tegra-pcie 1003000.pcie: link 0 down, ignoring
402[ 3.588056] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
403[ 3.588065] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
404[ 3.588070] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
405[ 3.588075] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
406[ 3.588081] pci_bus 0000:00: root bus resource [bus 00-ff]
407[ 3.588122] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
408[ 3.588233] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
409[ 3.588475] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
410[ 3.588618] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
411[ 3.588646] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
412[ 3.588679] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
413[ 3.588701] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
414[ 3.588842] pci 0000:01:00.0: supports D1 D2
415[ 3.588846] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
416[ 3.601840] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
417[ 3.601895] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref]
418[ 3.601900] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
419[ 3.601910] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
420[ 3.601931] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref]
421[ 3.601949] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
422[ 3.601960] pci 0000:00:02.0: PCI bridge to [bus 01]
423[ 3.601965] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
424[ 3.601973] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
425[ 3.602350] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
426[ 3.602354] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
427[ 3.602361] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
428[ 3.602485] aer 0000:00:02.0:pcie002: service driver aer loaded
429[ 4.085390] console [ttyS0] enabled
430[ 4.090209] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
431[ 4.099414] serial-tegra 70006200.serial: RX in PIO mode
432[ 4.104842] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
433[ 4.114757] [drm] Initialized
434[ 4.127869] brd: module loaded
435[ 4.136471] loop: module loaded
436[ 4.139771] tegra_profiler: version: 1.139, samples/io: 47/27
437[ 4.145656] tegra_profiler: auth: init
438[ 4.150821] THERMAL EST: found 2 subdevs
439[ 4.154835] THERMAL EST num_resources: 0
440[ 4.158779] [THERMAL EST subdev 0]
441[ 4.162195] [THERMAL EST subdev 1]
442[ 4.166065] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
443[ 4.175040] THERMAL EST: thz register success.
444[ 4.179656] THERMAL EST: end of probe, return err: 0
445[ 4.185910] hisi_sas: driver version v1.6
446[ 4.196109] libphy: Fixed MDIO Bus: probed
447[ 4.200982] tun: Universal TUN/TAP device driver, 1.6
448[ 4.206086] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
449[ 4.213382] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
450[ 4.219251] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
451[ 4.225246] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
452[ 4.232226] igb: Copyright (c) 2007-2014 Intel Corporation.
453[ 4.237871] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
454[ 4.245715] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
455[ 4.251696] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
456[ 4.258671] Copyright(c) 1999 - 2017 Intel Corporation.
457[ 4.264775] r8168 0000:01:00.0: enabling device (0000 -> 0003)
458[ 4.270696] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
459[ 4.298045] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
460[ 4.310482] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e5:dd:c6 from device tree
461[ 4.322930] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
462[ 4.334398] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
463 This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
464 This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
465[ 4.365801] PPP generic driver version 2.4.2
466[ 4.370280] PPP BSD Compression module registered
467[ 4.375003] PPP Deflate Compression module registered
468[ 4.380100] PPP MPPE Compression module registered
469[ 4.384905] NET: Registered protocol family 24
470[ 4.389425] usbcore: registered new interface driver r8152
471[ 4.394973] usbcore: registered new interface driver asix
472[ 4.400429] usbcore: registered new interface driver ax88179_178a
473[ 4.406569] usbcore: registered new interface driver cdc_ether
474[ 4.412447] usbcore: registered new interface driver net1080
475[ 4.418154] usbcore: registered new interface driver cdc_subset
476[ 4.424124] usbcore: registered new interface driver zaurus
477[ 4.429774] usbcore: registered new interface driver cdc_ncm
478[ 4.435611] VFIO - User Level meta-driver version: 0.3
479[ 4.441987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
480[ 4.448550] ehci-pci: EHCI PCI platform driver
481[ 4.453052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
482[ 4.459247] ohci-pci: OHCI PCI platform driver
483[ 4.463743] ohci-platform: OHCI generic platform driver
484[ 4.471553] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
485[ 4.477936] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
486[ 4.486281] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f96fe400 id
487[ 4.494751] usbcore: registered new interface driver uas
488[ 4.500127] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release
489[ 4.500173] tegra-xusb 70090000.xusb: xHCI Host Controller
490[ 4.500196] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
491[ 4.500950] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
492[ 4.501015] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
493[ 4.501261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
494[ 4.501267] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
495[ 4.501271] usb usb1: Product: xHCI Host Controller
496[ 4.501274] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
497[ 4.501278] usb usb1: SerialNumber: 70090000.xusb
498[ 4.511392] hub 1-0:1.0: USB hub found
499[ 4.511432] hub 1-0:1.0: 5 ports detected
500[ 4.511992] tegra-xusb 70090000.xusb: xHCI Host Controller
501[ 4.512002] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
502[ 4.512077] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
503[ 4.512175] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
504[ 4.512179] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
505[ 4.512183] usb usb2: Product: xHCI Host Controller
506[ 4.512186] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
507[ 4.512189] usb usb2: SerialNumber: 70090000.xusb
508[ 4.512619] hub 2-0:1.0: USB hub found
509[ 4.512649] hub 2-0:1.0: 4 ports detected
510[ 4.613945] usb usb1: usb_suspend_both: status 0
511[ 4.639594] usbcore: registered new interface driver usb-storage
512[ 4.645746] usbcore: registered new interface driver usbserial
513[ 4.655116] tegra-xudc-new 700d0000.xudc: device count: 1
514[ 4.661894] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
515[ 4.668635] tegra-xudc-new 700d0000.xudc: vbus state: 1
516[ 4.673890] tegra-xudc-new 700d0000.xudc: device mode on: 0
517[ 4.679501] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
518[ 4.686232] tegra-xudc-new 700d0000.xudc: active: 0 => 1
519[ 4.692268] mousedev: PS/2 mouse device common for all mice
520[ 4.697967] usbcore: registered new interface driver xpad
521[ 4.834385] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
522[ 4.844172] rtc rtc1: alarm rtc device
523[ 4.847964] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
524[ 4.855134] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
525[ 4.861851] i2c /dev entries driver
526[ 4.867136] i2c i2c-6: Added multiplexed i2c bus 7
527[ 4.872334] i2c i2c-6: Added multiplexed i2c bus 8
528[ 4.877151] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter
529[ 4.884924] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6
530[ 4.914199] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
531[ 4.920827] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121)
532[ 4.928349] imx219 7-0010: board setup failed
533[ 4.932802] imx219: probe of 7-0010 failed with error -121
534[ 4.938771] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6
535[ 4.967980] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
536[ 4.974601] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121)
537[ 4.982136] imx219 8-0010: board setup failed
538[ 4.986564] imx219: probe of 8-0010 failed with error -121
539[ 4.993013] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
540[ 5.002392] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
541[ 5.009480] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
542[ 5.016862] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
543[ 5.026200] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
544[ 5.035179] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
545[ 5.044223] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
546[ 5.053550] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
547[ 5.062517] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
548[ 5.071539] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
549[ 5.080856] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
550[ 5.089825] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
551[ 5.097842] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
552[ 5.105678] tegra_aotag tegra-aotag: Registering sensor 0
553[ 5.111195] tegra_aotag tegra-aotag: Bound to TZ : ID 0
554[ 5.116446] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
555[ 5.122947] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
556[ 5.132286] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
557[ 5.140522] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
558[ 5.149313] parse_throttle_dt_data: Num cap clks = 6
559[ 5.154294] parse_throttle_dt_data: clk=cclk_g type=2
560[ 5.159367] parse_throttle_dt_data: clk=gpu type=4
561[ 5.164190] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
562[ 5.170310] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
563[ 5.176427] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
564[ 5.182443] parse_throttle_dt_data: clk=emc type=3
565[ 5.187617] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
566[ 5.197051] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
567[ 5.206512] tegra_throttle_probe: probe successful. #cdevs=4
568[ 5.212959] FAN dev name: pwm-fan
569[ 5.216376] FAN:gpio request success.
570[ 5.220123] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
571[ 5.226096] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
572[ 5.232890] pwm_fan_driver pwm-fan: fan tach request irq success
573[ 5.238915] pwm_fan_driver pwm-fan: tach period: 1000
574[ 5.244076] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
575[ 5.251653] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
576[ 5.259405] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
577[ 5.267238] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
578[ 5.275074] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
579[ 5.282907] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
580[ 5.290743] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
581[ 5.298583] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
582[ 5.306423] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
583[ 5.314347] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
584[ 5.322915] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
585[ 5.331621] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
586[ 5.340459] device-mapper: uevent: version 1.0.3
587[ 5.345563] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
588[ 5.359387] tegra210-cpufreq cpufreq: probe()...completed
589[ 5.365556] sdhci: Secure Digital Host Controller Interface driver
590[ 5.371738] sdhci: Copyright(c) Pierre Ossman
591[ 5.376096] sdhci-pltfm: SDHCI platform and OF driver helper
592[ 5.382116] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful
593[ 5.396318] tegra-se 70012000.se: tegra_se_probe: complete
594[ 5.402324] hidraw: raw HID events driver (C) Jiri Kosina
595[ 5.409154] usbcore: registered new interface driver usbhid
596[ 5.414737] usbhid: USB HID core driver
597[ 5.420661] tegra21x_actmon 6000c800.actmon: in actmon_register()...
598[ 5.427239] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
599[ 5.435618] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr
600[ 5.447912] nvpmodel: initialized successfully
601[ 5.453458] usbcore: registered new interface driver snd-usb-audio
602[ 5.459713] No Device Node present for smmu client: snd-soc-dummy !!
603[ 5.466083] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
604[ 5.476785] iommu: Adding device snd-soc-dummy to group 35
605[ 5.483702] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
606[ 5.496213] mmc0: new HS400 Enhanced strobe MMC card at address 0001
607[ 5.507012] mmcblk0: mmc0:0001 DG4016 14.7 GiB
608[ 5.509454] OPE platform probe
609[ 5.509537] OPE platform probe successful
610[ 5.509934] OPE platform probe
611[ 5.510011] OPE platform probe successful
612[ 5.530129] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB
613[ 5.535999] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
614[ 5.536133] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
615[ 5.536251] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
616[ 5.536369] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
617[ 5.536492] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
618[ 5.536608] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
619[ 5.536735] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
620[ 5.536854] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
621[ 5.536973] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
622[ 5.537091] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
623[ 5.548753] u32 classifier
624[ 5.548754] Actions configured
625[ 5.548822] Initializing XFRM netlink socket
626[ 5.549537] NET: Registered protocol family 10
627[ 5.550299] NET: Registered protocol family 17
628[ 5.550309] NET: Registered protocol family 15
629[ 5.550383] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
630[ 5.550427] Bluetooth: RFCOMM socket layer initialized
631[ 5.550436] Bluetooth: RFCOMM ver 1.11
632[ 5.550440] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
633[ 5.550444] Bluetooth: HIDP socket layer initialized
634[ 5.550462] 9pnet: Installing 9P2000 support
635[ 5.550498] Key type dns_resolver registered
636[ 5.553303] Registered cp15_barrier emulation handler
637[ 5.553311] Registered setend emulation handler
638[ 5.554351] registered taskstats version 1
639[ 5.554933] Adding domain ve2-pd to PM domain host1x-pd
640[ 5.555178] Adding domain ve-pd to PM domain host1x-pd
641[ 5.557214] isp 54600000.isp: initialized
642[ 5.558164] isp 54680000.isp: initialized
643[ 5.568123] last reset is due to software reset
644[ 5.568126] KERNEL: PMC reset status reg: 0x3
645[ 5.568200] BL: PMC reset status reg: 0x3
646[ 5.568202] BL: PMIC poweroff Event Recorder: 0x0
647[ 5.569621] clk_cbus_recalc_rate: no gbus parent
648[ 5.569625] clk_cbus_round_rate: no gbus parent
649[ 5.569627] clk_cbus_round_rate: no gbus parent
650[ 5.569633] clk_cbus_recalc_rate: no gbus parent
651[ 5.569731] clk_cbus_recalc_rate: no gbus parent
652[ 5.569734] clk_cbus_round_rate: no gbus parent
653[ 5.569736] clk_cbus_round_rate: no gbus parent
654[ 5.569739] clk_cbus_recalc_rate: no gbus parent
655[ 5.569752] tegra_dvfs: GPU-cap: registered
656[ 5.569836] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
657[ 5.569838] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled
658[ 5.569840] tegra dvfs: vdd-gpu: nominal 1038mV, offset 708000uV, step 10000uV, scaling enabled
659[ 5.617748] tegra_dvfs: vdd-gpu-vts: registered
660[ 5.650365] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
661[ 5.650967] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
662[ 5.651439] input: gpio-keys as /devices/gpio-keys/input/input1
663[ 5.699827] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-02 00:54:24 UTC (946774464)
664[ 5.700841] vi 54080000.vi: vi_probe: ++
665[ 5.780841] vi 54080000.vi: initialized
666[ 5.818377] vi 54080000.vi: subdev nvcsi--2 bound
667[ 5.818481] vi 54080000.vi: subdev nvcsi--1 bound
668[ 5.818727] mmcblk mmc0:0001: Card claimed for testing.
669[ 5.820072] Disable partitions left on by BL
670[ 5.820075] disb
671[ 5.820116] bwmgr: missing cdev-type property
672[ 5.820242] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
673[ 5.820247] DRAM derating cdev registered.
674[ 5.821216] vdd-fan: disabling
675[ 5.821219] vdd-usb-vbus: disabling
676[ 5.821221] vdd-usb-vbus2: disabling
677[ 5.821228] vddio-sdmmc-ap: disabling
678[ 5.825404] vddio-sdmmc3-ap: disabling
679[ 5.830139] vdd-3v3-sd: disabling
680[ 5.830143] avdd-io-edp-1v05: disabling
681[ 5.830145] vdd-usb-hub-en: disabling
682[ 5.835340] ALSA device list:
683[ 5.835343] #0: tegra-hda at 0x70038000 irq 82
684[ 5.835345] #1: tegra-snd-t210ref-mobile-rt565x
685[ 5.903090] Freeing unused kernel memory: 8576K
686[ 5.907937] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB
687[ 5.916052] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
688[ 5.923785] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
689[ 5.933401] Root device found: mmcblk0p1
690[ 5.938434] Found dev node: /dev/mmcblk0p1
691[ 5.962157] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
692[ 5.971060] Rootfs mounted over mmcblk0p1
693[ 5.993658] Switching from initrd to actual rootfs
694[ 6.079148] systemd[1]: System time before build time, advancing clock.
695[ 6.098879] ip_tables: (C) 2000-2006 Netfilter Core Team
696[ 6.115248] cgroup: cgroup2: unknown option "nsdelegate"
697[ 6.127196] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
698[ 6.149298] systemd[1]: Detected architecture arm64.
699[ 6.179860] systemd[1]: Set hostname to <nano-desktop>.
700[ 6.248303] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
701[ 6.265885] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
702[ 6.373061] random: systemd: uninitialized urandom read (16 bytes read)
703[ 6.381590] systemd[1]: Created slice User and Session Slice.
704[ 6.387837] random: systemd: uninitialized urandom read (16 bytes read)
705[ 6.396249] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
706[ 6.405863] random: systemd: uninitialized urandom read (16 bytes read)
707[ 6.412607] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
708[ 6.420313] systemd[1]: Reached target Swap.
709[ 6.424709] systemd[1]: Reached target User and Group Name Lookups.
710[ 6.480408] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
711[ 6.533234] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
712[ 6.739423] systemd-journald[1990]: Received request to flush runtime journal from PID 1
713[ 7.201368] using random self ethernet address
714[ 7.213837] using random host ethernet address
715[ 7.537815] FAN rising trip_level:1 cur_temp:55250 trip_temps[2]:61000
716[ 7.772739] random: crng init done
717[ 7.776146] random: 7 urandom warning(s) missed due to ratelimiting
718[ 7.948623] Mass Storage Function, version: 2009/09/11
719[ 7.948630] LUN: removable file: (no medium)
720[ 7.990175] using random self ethernet address
721[ 8.008770] using random host ethernet address
722[ 8.103148] rndis0: HOST MAC ba:26:31:48:9c:ec
723[ 8.103354] rndis0: MAC ba:26:31:48:9c:ed
724[ 8.106329] usb0: HOST MAC ba:26:31:48:9c:ee
725[ 8.106369] usb0: MAC ba:26:31:48:9c:ef
726[ 8.106401] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
727[ 8.114039] l4tbr0: port 1(rndis0) entered blocking state
728[ 8.114044] l4tbr0: port 1(rndis0) entered disabled state
729[ 8.114376] device rndis0 entered promiscuous mode
730[ 8.124865] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
731[ 8.129291] l4tbr0: port 2(usb0) entered blocking state
732[ 8.129296] l4tbr0: port 2(usb0) entered disabled state
733[ 8.129902] device usb0 entered promiscuous mode
734[ 8.167845] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
735[ 8.379266] zram: Added device: zram0
736[ 8.382740] zram: Added device: zram1
737[ 8.387125] zram: Added device: zram2
738[ 8.388696] zram: Added device: zram3
739[ 8.404451] android_work: did not send uevent (0 0 (null))
740[ 8.424729] zram0: detected capacity change from 0 to 519614464
741[ 8.467889] Adding 507432k swap on /dev/zram0. Priority:5 extents:1 across:507432k SS
742[ 8.472062] zram1: detected capacity change from 0 to 519614464
743[ 8.475267] android_work: sent uevent USB_STATE=CONNECTED
744[ 8.498533] Adding 507432k swap on /dev/zram1. Priority:5 extents:1 across:507432k SS
745[ 8.506933] zram2: detected capacity change from 0 to 519614464
746[ 8.530507] Adding 507432k swap on /dev/zram2. Priority:5 extents:1 across:507432k SS
747[ 8.532606] android_work: sent uevent USB_STATE=DISCONNECTED
748[ 8.536007] zram3: detected capacity change from 0 to 519614464
749[ 8.553323] Adding 507432k swap on /dev/zram3. Priority:5 extents:1 across:507432k SS
750[ 8.623226] android_work: sent uevent USB_STATE=CONNECTED
751[ 8.627837] configfs-gadget gadget: high-speed config #1: c
752[ 8.627870] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled
753[ 8.627887] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled
754[ 8.627902] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled
755[ 8.627999] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled
756[ 8.628015] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled
757[ 8.628030] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled
758[ 8.628061] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled
759[ 8.628102] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
760[ 8.628259] android_work: sent uevent USB_STATE=CONFIGURED
761[ 8.628297] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled
762[ 8.628313] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled
763[ 8.631477] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
764[ 8.631494] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
765[ 8.631719] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
766[ 8.636660] tegra-xudc-new 700d0000.xudc: ep 13 disabled
767[ 8.636754] tegra-xudc-new 700d0000.xudc: ep 8 disabled
768[ 8.655351] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
769[ 8.655370] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
770[ 8.678312] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
771[ 8.678318] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
772[ 8.733949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
773[ 8.735103] eth0: 0xffffff800a37c000, 00:04:4b:e5:dd:c6, IRQ 405
774[ 8.785141] usb usb2: usb_suspend_both: status 0
775[ 8.823340] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
776[ 9.480948] tegradc tegradc.0: blank - powerdown
777[ 9.480958] tegradc tegradc.1: blank - powerdown
778[ 11.121866] tegra-xusb 70090000.xusb: entering ELPG
779[ 11.122889] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0
780[ 11.123078] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0
781[ 11.123971] tegra-xusb 70090000.xusb: entering ELPG done
782[ 12.297266] fuse init (API version 7.26)
783[ 12.938972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
784[ 12.938984] Bluetooth: BNEP socket layer initialized
785[ 13.394402] l4tbr0: port 2(usb0) entered blocking state
786[ 13.394409] l4tbr0: port 2(usb0) entered forwarding state
787[ 13.394482] l4tbr0: port 1(rndis0) entered blocking state
788[ 13.394486] l4tbr0: port 1(rndis0) entered forwarding state
789[ 13.398963] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready
790[ 13.398990] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready
791[ 17.617812] FAN rising trip_level:2 cur_temp:61750 trip_temps[3]:71000