2LbgUe9u

1app@microdev:~$ dmesg
2Booting Linux on physical CPU 0x0
3Linux version 4.1.43+g34ff62ee3d98 (oe-user@oe-host) (gcc version 6.4.0 (GCC) ) #12 SMP PREEMPT Fri Sep 13 19:15:31 UTC 2019
4CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
5CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
6Machine model: Engicam MicroDev carrier based on MicroGEA MX6ULL SOM
7Reserved memory: created CMA memory pool at 0x84000000, size 64 MiB
8Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
9Memory policy: Data cache writealloc
10On node 0 totalpages: 32768
11free_area_init_node: node 0, pgdat 80ba88c0, node_mem_map 83ed7000
12  Normal zone: 256 pages used for memmap
13  Normal zone: 0 pages reserved
14  Normal zone: 32768 pages, LIFO batch:7
15PERCPU: Embedded 12 pages/cpu @83eb5000 s17228 r8192 d23732 u49152
16pcpu-alloc: s17228 r8192 d23732 u49152 alloc=12*4096
17pcpu-alloc: [0] 0
18Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
19Kernel command line: console=ttymxc0,115200 cma=16M video=mxcfb0:dev=lcd,Amp-WD mtdparts=gpmi-nand:4m(boot),8m(kernel),1m(dtb),100m(rootfs),-(rw) ubi.mtd=rootfs ubi.mtd=rw root=ubi0:rootfs rootfstype=ubifs
20PID hash table entries: 512 (order: -1, 2048 bytes)
21Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
22Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
23Memory: 51708K/131072K available (8195K kernel code, 430K rwdata, 2896K rodata, 384K init, 439K bss, 13828K reserved, 65536K cma-reserved, 0K highmem)
24Virtual kernel memory layout:
25    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
26    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
27    vmalloc : 0x88800000 - 0xff000000   (1896 MB)
28    lowmem  : 0x80000000 - 0x88000000   ( 128 MB)
29    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
30    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
31      .text : 0x80008000 - 0x80add0fc   (11093 kB)
32      .init : 0x80ade000 - 0x80b3e000   ( 384 kB)
33      .data : 0x80b3e000 - 0x80ba9aa0   ( 431 kB)
34       .bss : 0x80bac000 - 0x80c19fe0   ( 440 kB)
35SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
36Preemptible hierarchical RCU implementation.
37        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
38RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
39NR_IRQS:16 nr_irqs:16 16
40mxc_clocksource_init 24000000
41Switching to timer-based delay loop, resolution 41ns
42sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
43clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
44Console: colour dummy device 80x30
45Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
46pid_max: default: 32768 minimum: 301
47Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
48Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
49CPU: Testing write buffer coherency: ok
50/cpus/cpu@0 missing clock-frequency property
51CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
52Setting up static identity map for 0x80008280 - 0x800082d8
53Brought up 1 CPUs
54SMP: Total of 1 processors activated (48.00 BogoMIPS).
55CPU: All CPU(s) started in SVC mode.
56devtmpfs: initialized
57device-tree: Duplicate name in lcdif@021c8000, renamed to "display#1"
58VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
59clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
60futex hash table entries: 256 (order: 2, 16384 bytes)
61pinctrl core: initialized pinctrl subsystem
62NET: Registered protocol family 16
63DMA: preallocated 256 KiB pool for atomic coherent allocations
64cpuidle: using governor ladder
65cpuidle: using governor menu
66hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
67hw-breakpoint: maximum watchpoint size is 8 bytes.
68imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
69imx6ul-pinctrl 2290000.iomuxc-snvs: no functions defined
70imx6ul-pinctrl 2290000.iomuxc-snvs: fail to probe dt properties
71imx6ul-pinctrl: probe of 2290000.iomuxc-snvs failed with error -22
72mxs-dma 1804000.dma-apbh: initialized
73SCSI subsystem initialized
74libata version 3.00 loaded.
75usbcore: registered new interface driver usbfs
76usbcore: registered new interface driver hub
77usbcore: registered new device driver usb
78i2c i2c-0: IMX I2C adapter registered
79i2c i2c-0: can't use DMA
80i2c i2c-1: IMX I2C adapter registered
81i2c i2c-1: can't use DMA
82media: Linux media interface: v0.10
83Linux video capture interface: v2.00
84pps_core: LinuxPPS API ver. 1 registered
85pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
86PTP clock support registered
87MIPI CSI2 driver module loaded
88Advanced Linux Sound Architecture Driver Initialized.
89Bluetooth: Core ver 2.20
90NET: Registered protocol family 31
91Bluetooth: HCI device and connection manager initialized
92Bluetooth: HCI socket layer initialized
93Bluetooth: L2CAP socket layer initialized
94Bluetooth: SCO socket layer initialized
95Switched to clocksource mxc_timer1
96NET: Registered protocol family 2
97TCP established hash table entries: 1024 (order: 0, 4096 bytes)
98TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
99TCP: Hash tables configured (established 1024 bind 1024)
100UDP hash table entries: 256 (order: 1, 8192 bytes)
101UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
102NET: Registered protocol family 1
103RPC: Registered named UNIX socket transport module.
104RPC: Registered udp transport module.
105RPC: Registered tcp transport module.
106RPC: Registered tcp NFSv4.1 backchannel transport module.
107imx rpmsg driver is registered.
108Bus freq driver module loaded
109VFS: Disk quotas dquot_6.6.0
110VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
111NFS: Registering the id_resolver key type
112Key type id_resolver registered
113Key type id_legacy registered
114jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
115fuse init (API version 7.23)
116io scheduler noop registered
117io scheduler deadline registered
118io scheduler cfq registered (default)
119imx-weim 21b8000.weim: Driver registered.
120gpio-export gpio_export: 11 gpio(s) exported
121backlight supply power not found, using dummy regulator
122MIPI DSI driver module loaded
123imx-sdma 20ec000.sdma: no event needs to be remapped
124imx-sdma 20ec000.sdma: loaded firmware 3.3
125imx-sdma 20ec000.sdma: initialized
1262020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 19, base_baud = 5000000) is a IMX
127console [ttymxc0] enabled
12821e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 226, base_baud = 5000000) is a IMX
12921f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 227, base_baud = 5000000) is a IMX
13021f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 228, base_baud = 5000000) is a IMX
1312288000.serial: ttymxc7 at MMIO 0x2288000 (irq = 233, base_baud = 5000000) is a IMX
132imx sema4 driver is registered.
133[drm] Initialized drm 1.1.0 20060810
134[drm] Initialized vivante 1.0.0 20120216 on minor 0
135brd: module loaded
136loop: module loaded
137nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
138nand: Micron MT29F2G08ABAEAH4
139nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
140gpmi-nand 1806000.gpmi-nand: use legacy bch geometry
141gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5
142Bad block table found at page 131008, version 0x01
143Bad block table found at page 130944, version 0x01
1445 cmdlinepart partitions found on MTD device gpmi-nand
145Creating 5 MTD partitions on "gpmi-nand":
1460x000000000000-0x000000400000 : "boot"
1470x000000400000-0x000000c00000 : "kernel"
1480x000000c00000-0x000000d00000 : "dtb"
1490x000000d00000-0x000007100000 : "rootfs"
1500x000007100000-0x000010000000 : "rw"
151gpmi-nand 1806000.gpmi-nand: driver registered.
152CAN device driver interface
153flexcan 2090000.can: device registered (reg_base=88a18000, irq=25)
1542188000.ethernet supply phy not found, using dummy regulator
155pps pps0: new PPS source ptp0
156libphy: fec_enet_mii_bus: probed
157fec 2188000.ethernet eth0: registered PHC device 0
158PPP generic driver version 2.4.2
159PPP BSD Compression module registered
160PPP Deflate Compression module registered
161PPP MPPE Compression module registered
162NET: Registered protocol family 24
163ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
164ehci-mxc: Freescale On-Chip EHCI Host driver
165usbcore: registered new interface driver cdc_acm
166cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
167usbcore: registered new interface driver usb-storage
168usbcore: registered new interface driver usbserial
169usbcore: registered new interface driver usbserial_generic
170usbserial: USB Serial support registered for generic
171usbcore: registered new interface driver ftdi_sio
172usbserial: USB Serial support registered for FTDI USB Serial Device
173usbcore: registered new interface driver option
174usbserial: USB Serial support registered for GSM modem (1-port)
175usbcore: registered new interface driver pl2303
176usbserial: USB Serial support registered for pl2303
1772184800.usbmisc supply vbus-wakeup not found, using dummy regulator
1782184000.usb supply vbus not found, using dummy regulator
179ci_hdrc ci_hdrc.0: EHCI Host Controller
180ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
181ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
182hub 1-0:1.0: USB hub found
183hub 1-0:1.0: 1 port detected
1842184200.usb supply vbus not found, using dummy regulator
185ci_hdrc ci_hdrc.1: EHCI Host Controller
186ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
187ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
188hub 2-0:1.0: USB hub found
189hub 2-0:1.0: 1 port detected
190mousedev: PS/2 mouse device common for all mice
191rtc-pcf8523: probe of 0-0068 failed with error -5
192snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
193i2c /dev entries driver
194IR NEC protocol handler initialized
195IR RC5(x/sz) protocol handler initialized
196IR RC6 protocol handler initialized
197IR JVC protocol handler initialized
198IR Sony protocol handler initialized
199IR SANYO protocol handler initialized
200IR Sharp protocol handler initialized
201IR MCE Keyboard/mouse protocol handler initialized
202IR XMP protocol handler initialized
203pxp-v4l2 pxp_v4l2: initialized
204lm75 0-0049: hwmon0: sensor 'lm75a'
205imx2-wdt 20bc000.wdog: use WDOG_B to reboot.
206imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
207Bluetooth: HCI UART driver ver 2.3
208Bluetooth: HCI UART protocol H4 registered
209Bluetooth: HCI UART protocol BCSP registered
210Bluetooth: HCI UART protocol ATH3K registered
211Bluetooth: HCI UART protocol BCM registered
212usbcore: registered new interface driver bcm203x
213usbcore: registered new interface driver btusb
214usbcore: registered new interface driver ath3k
215sdhci: Secure Digital Host Controller Interface driver
216sdhci: Copyright(c) Pierre Ossman
217sdhci-pltfm: SDHCI platform and OF driver helper
218/soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified
219sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
220sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
221sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found
222mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
223/soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
224sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
225mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
226usbcore: registered new interface driver usbhid
227usbhid: USB HID core driver
228fsl-asrc 2034000.asrc: driver registered
229mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
230NET: Registered protocol family 26
231ipip: IPv4 over IPv4 tunneling driver
232mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
233NET: Registered protocol family 10
234mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
235sit: IPv6 over IPv4 tunneling driver
236NET: Registered protocol family 17
237bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
238can: controller area network core (rev 20120528 abi 9)
239NET: Registered protocol family 29
240can: raw protocol (rev 20120528)
241can: broadcast manager protocol (rev 20120528 t)
242can: netlink gateway (rev 20130117) max_hops=1
243mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
244Bluetooth: RFCOMM TTY layer initialized
245Bluetooth: RFCOMM socket layer initialized
246Bluetooth: RFCOMM ver 1.11
247Bluetooth: BNEP (Ethernet Emulation) ver 1.3
248Bluetooth: BNEP filters: protocol multicast
249Bluetooth: BNEP socket layer initialized
250Bluetooth: HIDP (Human Interface Emulation) ver 1.2
251Bluetooth: HIDP socket layer initialized
2528021q: 802.1Q VLAN Support v1.8
253Key type dns_resolver registered
254backlight supply power not found, using dummy regulator
255backlight supply power not found, using dummy regulator
256ubi0: attaching mtd3
257mmc1: new high speed SDIO card at address 0001
258backlight supply power not found, using dummy regulator
259brcmfmac: F1 signature read @0x18000000=0x1531a9a6
260brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
261brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
262backlight supply power not found, using dummy regulator
263brcmfmac_sdio mmc1:0001:1: Falling back to user helper
264ubi0: scanning is finished
265ubi0: attached mtd3 (name "rootfs", size 100 MiB)
266ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
267ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
268ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
269ubi0: good PEBs: 800, bad PEBs: 0, corrupted PEBs: 0
270ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
271ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
272ubi0: available PEBs: 0, total reserved PEBs: 800, PEBs reserved for bad PEB handling: 40
273ubi0: background thread "ubi_bgt0d" started, PID 77
274ubi1: attaching mtd4
275random: nonblocking pool is initialized
276ubi1: scanning is finished
277ubi1: attached mtd4 (name "rw", size 143 MiB)
278ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
279ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
280ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
281ubi1: good PEBs: 1140, bad PEBs: 4, corrupted PEBs: 0
282ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
283ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
284ubi1: available PEBs: 0, total reserved PEBs: 1140, PEBs reserved for bad PEB handling: 36
285ubi1: background thread "ubi_bgt1d" started, PID 78
286snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)
287out-3v3: disabling
288out-1v8: disabling
289ALSA device list:
290  No soundcards found.
291UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
292UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
293UBIFS (ubi0:0): FS size: 94597120 bytes (90 MiB, 745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
294UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
295UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID CEB3F038-4E57-437B-97FE-6D52E8CC41E6, small LPT model
296VFS: Mounted root (ubifs filesystem) readonly on device 0:14.
297devtmpfs: mounted
298Freeing unused kernel memory: 384K (80ade000 - 80b3e000)
299UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 92
300UBIFS (ubi1:0): recovery needed
301UBIFS (ubi1:0): recovery completed
302UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "rw"
303UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
304UBIFS (ubi1:0): FS size: 138276864 bytes (131 MiB, 1089 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
305UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
306UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 0D1CE913-AA6E-44FB-9627-F68F3989EB90, small LPT model
307udevd[101]: starting version 3.2.1
308udevd[102]: starting eudev-3.2.1
309pxp-v4l2 pxp_v4l2: failed to call pxp_set_fbinfo
310brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
311brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
312usb 1-1: new high-speed USB device number 2 using ci_hdrc
313usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
314backlight supply power not found, using dummy regulator
315usb 1-1: USB disconnect, device number 2
316usb 1-1: new high-speed USB device number 3 using ci_hdrc