· 6 years ago · Oct 11, 2019, 02:26 PM
1##############################################
2# CoreELEC #
3# https://coreelec.org #
4##############################################
5
6CoreELEC (official): 9.2.0 (Amlogic-ng.arm)
7CoreELEC:~ # dmesg -c
8[ 0.000000@0] Booting Linux on physical CPU 0x0
9[ 0.000000@0] Linux version 4.9.190 (adamg@zulu) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Sun Sep 15 17:53:52 BST 2019
10[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
11[ 0.000000@0] Machine model: Hardkernel ODROID-N2
12[ 0.000000@0] efi: Getting EFI parameters from FDT:
13[ 0.000000@0] efi: UEFI not found.
14[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
15[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
16[ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
17[ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000ed800000, size 0 MiB
18[ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
19[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB
20[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB
21[ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
22[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e5800000, size 128 MiB
23[ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
24[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e3000000, size 40 MiB
25[ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
26[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000c0800000, size 308 MiB
27[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
28[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
29[ 0.000000@0] OF: reserved mem: invalid size property in 'linux,galcore' node.
30[ 0.000000@0] cma: Reserved 8 MiB at 0x00000000e2800000
31[ 0.000000@0] On node 0 totalpages: 972800
32[ 0.000000@0] DMA zone: 15200 pages used for memmap
33[ 0.000000@0] DMA zone: 0 pages reserved
34[ 0.000000@0] DMA zone: 972800 pages, LIFO batch:31
35[ 0.000000@0] psci: probing for conduit method from DT.
36[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
37[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
38[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
39[ 0.000000@0] psci: SMC Calling Convention v1.1
40[ 0.000000@0] percpu: Embedded 22 pages/cpu s51992 r8192 d29928 u90112
41[ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096
42[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
43[ 0.000000@0] Detected VIPT I-cache on CPU0
44[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
45[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 957600
46[ 0.000000@0] Kernel command line: BOOT_IMAGE=kernel.img boot=UUID=1709-3714 disk=UUID=f81f3518-5a6e-4596-8834-3f94aada30b3 console=ttyS0,115200 console=tty0 no_console_suspend max_freq_a53=1896 max_freq_a73=1800 enable_wol=1 hdmitx=cec3f remotewakeup=0x23dc4db2 decode_type=0 remotewakeupmask=0xffffffff hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto
47[ 0.000000@0] [get_max_freq_a53] - max_freq : 1896000
48[ 0.000000@0] [get_max_freq_a73] - max_freq : 1800000
49[ 0.000000@0] hdmitx: HDMI hdmi_cec_func_config:0x3f
50[ 0.000000@0] vout: get hdmimode: 1080p60hz
51[ 0.000000@0] fb: osd0
52[ 0.000000@0] fb: loaded
53[ 0.000000@0] fb: 0x3d800000
54[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
55[ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
56[ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
57[ 0.000000@0] Memory: 3279980K/3891200K available (11516K kernel code, 1648K rwdata, 9184K rodata, 4800K init, 1696K bss, 103316K reserved, 507904K cma-reserved)
58[ 0.000000@0] Virtual kernel memory layout:
59[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
60[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
61[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009bc0000 ( 11520 KB)
62[ 0.000000@0] .rodata : 0xffffff8009bc0000 - 0xffffff800a4c0000 ( 9216 KB)
63[ 0.000000@0] .init : 0xffffff800a4c0000 - 0xffffff800a970000 ( 4800 KB)
64[ 0.000000@0] .data : 0xffffff800a970000 - 0xffffff800ab0c200 ( 1649 KB)
65[ 0.000000@0] .bss : 0xffffff800ab0c200 - 0xffffff800acb433c ( 1697 KB)
66[ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
67[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
68[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
69[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf03b60000 ( 59 MB actual)
70[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0ed800000 ( 3800 MB)
71[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
72[ 0.000000@0] Preemptible hierarchical RCU implementation.
73[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
74[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
75[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
76[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
77[ 0.000000@0] GPIO-INTC: support to detect double-edge trigger signal
78[ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
79[ 0.000000@0] Meson chip version = RevA (29:A - 40:0)
80[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
81[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
82[ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
83[ 0.000000@0] meson_g12a_media_init: register meson media clk
84[ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
85[ 0.000000@0] meson_g12a_misc_init: done.
86[ 0.000000@0] g12a_clkc_init initialization complete
87[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
88[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
89[ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
90[ 0.000037@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
91[ 0.000617@0] Console: colour dummy device 80x25
92[ 0.000644@0] console [tty0] enabled
93[ 0.000656@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
94[ 0.000664@0] pid_max: default: 32768 minimum: 301
95[ 0.000754@0] Security Framework initialized
96[ 0.000760@0] SELinux: Initializing.
97[ 0.000793@0] SELinux: Starting in permissive mode
98[ 0.000821@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
99[ 0.000826@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
100[ 0.001449@0] ftrace: allocating 38027 entries in 149 pages
101[ 0.067696@0] sched-energy: Sched-energy-costs installed from DT
102[ 0.067703@0] CPU0: update cpu_capacity 631
103[ 0.067713@0] ASID allocator initialised with 65536 entries
104[ 0.099471@0] EFI services will not be available.
105[ 0.147776@1] Detected VIPT I-cache on CPU1
106[ 0.147822@1] CPU1: update cpu_capacity 631
107[ 0.147824@1] CPU1: Booted secondary processor [410fd034]
108[ 0.180303@2] Detected VIPT I-cache on CPU2
109[ 0.180341@2] CPU2: update cpu_capacity 920
110[ 0.180343@2] CPU2: Booted secondary processor [410fd092]
111[ 0.211859@3] Detected VIPT I-cache on CPU3
112[ 0.211882@3] CPU3: update cpu_capacity 920
113[ 0.211884@3] CPU3: Booted secondary processor [410fd092]
114[ 0.243920@4] Detected VIPT I-cache on CPU4
115[ 0.243941@4] CPU4: update cpu_capacity 920
116[ 0.243943@4] CPU4: Booted secondary processor [410fd092]
117[ 0.275991@5] Detected VIPT I-cache on CPU5
118[ 0.276013@5] CPU5: update cpu_capacity 920
119[ 0.276015@5] CPU5: Booted secondary processor [410fd092]
120[ 0.276096@0] Brought up 6 CPUs
121[ 0.276102@0] SMP: Total of 6 processors activated.
122[ 0.276108@0] CPU features: detected feature: 32-bit EL0 Support
123[ 0.276230@0] CPU: All CPU(s) started at EL2
124[ 0.276264@0] alternatives: patching kernel code
125[ 0.277732@0] devtmpfs: initialized
126[ 0.293002@0] DMI not present or invalid.
127[ 0.293296@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
128[ 0.293312@0] futex hash table entries: 2048 (order: 5, 131072 bytes)
129[ 0.309783@0] pinctrl core: initialized pinctrl subsystem
130[ 0.310759@0] NET: Registered protocol family 16
131[ 0.312171@0] schedtune: init normalization constants...
132[ 0.312182@0] schedtune: CLUSTER[0-1] min_pwr: 0 max_pwr: 42
133[ 0.312186@0] schedtune: CPU[0] min_pwr: 0 max_pwr: 279
134[ 0.312189@0] schedtune: CPU[1] min_pwr: 0 max_pwr: 279
135[ 0.312192@0] schedtune: CLUSTER[2-5] min_pwr: 0 max_pwr: 64
136[ 0.312196@0] schedtune: CPU[2] min_pwr: 0 max_pwr: 759
137[ 0.312199@0] schedtune: CPU[3] min_pwr: 0 max_pwr: 759
138[ 0.312202@0] schedtune: CPU[4] min_pwr: 0 max_pwr: 759
139[ 0.312205@0] schedtune: CPU[5] min_pwr: 0 max_pwr: 759
140[ 0.312208@0] schedtune: SYSTEM min_pwr: 0 max_pwr: 3700
141[ 0.312211@0] schedtune: using normalization constants mul: 459677581 sh1: 1 sh2: 11
142[ 0.312213@0] schedtune: verify normalization constants...
143[ 0.312216@0] schedtune: max_pwr/2^0: 3700 => norm_pwr: 1024
144[ 0.312218@0] schedtune: max_pwr/2^1: 1850 => norm_pwr: 512
145[ 0.312220@0] schedtune: max_pwr/2^2: 925 => norm_pwr: 256
146[ 0.312223@0] schedtune: max_pwr/2^3: 462 => norm_pwr: 127
147[ 0.312225@0] schedtune: max_pwr/2^4: 231 => norm_pwr: 63
148[ 0.312227@0] schedtune: max_pwr/2^5: 115 => norm_pwr: 31
149[ 0.312229@0] schedtune: configured to support global boosting only
150[ 0.336082@0] cpuidle: using governor menu
151[ 0.336184@0] register canvas platform driver
152[ 0.336210@0] register rdma platform driver
153[ 0.336234@0] aml_vdac_init: module init
154[ 0.337515@0] vdso: 2 pages (1 code @ ffffff8009bc7000, 1 data @ ffffff800a975000)
155[ 0.337530@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
156[ 0.339033@1] DMA: preallocated 2048 KiB pool for atomic allocations
157[ 0.339192@1] clkmsr: clkmsr: driver init
158[ 0.339194@1] codec_mm_module_init
159[ 0.339230@1] media_configs_system_init
160[ 0.339644@1] pstore: using zlib compression
161[ 0.339678@1] console [pstore-1] enabled
162[ 0.339680@1] pstore: Registered ramoops as persistent store backend
163[ 0.339684@1] ramoops: attached 0x100000@0x7400000, ecc: 0/0
164[ 0.341177@1] aml_iomap: amlogic iomap probe done
165[ 0.341462@1] vpu: driver version: v20190329(8-g12b)
166[ 0.341468@1] vpu: load vpu_clk: 666666667Hz(7)
167[ 0.341647@1] vpu: clktree_init
168[ 0.341694@1] vpu: vpu_probe OK
169[ 0.346600@0] clkmsr: msr_clk_reg0=ffffff800837c004,msr_clk_reg2=ffffff800837e00c
170[ 0.346610@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
171[ 0.350658@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
172[ 0.350845@0] aml_vdac_probe: ok
173[ 0.351022@0] canvas_probe reg=00000000ff638000,size=2000
174[ 0.351050@0] canvas maped reg_base =ffffff8008452000
175[ 0.357442@0] rdma_probe,cpu_type:1, ver:0, len:8
176[ 0.357689@0] rdma_register, rdma_table_addr ffffff8008475000 rdma_table_addr_phy e2a00000 reg_buf ffffffc0dd628000
177[ 0.357695@0] rdma_register success, handle 1 table_size 32768
178[ 0.357698@0] set_rdma_handle video rdma handle = 1.
179[ 0.358671@0] aml_snd_reg_map[0], reg:ff640000, size:2000
180[ 0.358682@0] aml_snd_reg_map[1], reg:ff642000, size:2000
181[ 0.358690@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
182[ 0.358699@0] aml_snd_reg_map[3], reg:ff656000, size:1800
183[ 0.358713@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
184[ 0.358715@0] amlogic auge_snd_iomap probe done
185[ 0.361022@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
186[ 0.361150@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
187[ 0.361152@0] codec_mm_probe ok
188[ 0.362769@0] cvbs_out: cvbsout_probe, cpu_id:5,name:meson-g12b-cvbsout
189[ 0.362781@0] cvbs_out: clk path:0
190[ 0.362786@0] cvbs_out: cvbs trimming.1.v5: 0xa0, 0x0
191[ 0.362930@0] vout: vout1: register server: cvbs_vout_server
192[ 0.362933@0] cvbs_out: register cvbs module server ok
193[ 0.362936@0] vout: vout2: register server: cvbs_vout2_server
194[ 0.362938@0] cvbs_out: register cvbs module vout2 server ok
195[ 0.362942@0] cvbs_out: chrdev devno 264241152 for disp
196[ 0.363179@0] cvbs_out: create cdev cvbs
197[ 0.363183@0] cvbs_out: cvbsout_probe OK
198[ 0.489711@3] SCSI subsystem initialized
199[ 0.489863@3] usbcore: registered new interface driver usbfs
200[ 0.489896@3] usbcore: registered new interface driver hub
201[ 0.489954@3] usbcore: registered new device driver usb
202[ 0.490033@3] pps_core: LinuxPPS API ver. 1 registered
203[ 0.490036@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
204[ 0.490058@3] PTP clock support registered
205[ 0.490159@3] dmi: Firmware registration failed.
206[ 0.490417@3] secmon: reserve_mem_size:0x300000
207[ 0.490485@3] secmon secmon: assigned reserved memory node linux,secmon
208[ 0.490488@3] secmon: clear_range:5100000 200000
209[ 0.490656@3] secmon: get page:ffffffbf00140000, 5000
210[ 0.490669@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
211[ 0.490671@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
212[ 0.491191@3] hdmitx: system: amhdmitx_probe start
213[ 0.491193@3] hdmitx: system: Ver: 20181019
214[ 0.491214@3] hdmitx: system: hdmitx_device.chip_type : 11
215[ 0.491236@3] hdmitx: system: not find product desc
216[ 0.491238@3] hdmitx: system: not find match pwr-ctl
217[ 0.491264@3] hdmitx: system: not find drm_amhdmitx
218[ 0.491280@3] hdmitx: system: hpd irq = 41
219[ 0.491366@3] hdmitx: system: hdcp22_tx_skp failed to probe
220[ 0.491370@3] hdmitx: system: hdcp22_tx_esm failed to probe
221[ 0.491675@3] vout: vout1: register server: hdmitx_vout_server
222[ 0.491678@3] vout: vout2: register server: hdmitx_vout2_server
223[ 0.491987@3] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
224[ 0.491997@3] hdmitx: hdmitx20: Mapped PHY: 0xff634400
225[ 0.492005@3] hdmitx: hdmitx20: Mapped PHY: 0xff900000
226[ 0.492019@3] hdmitx: hdmitx20: Mapped PHY: 0xff800000
227[ 0.492022@3] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
228[ 0.492025@3] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
229[ 0.492027@3] hdmitx: hdmitx20: Mapped PHY: 0xff608000
230[ 0.492030@3] hdmitx: hdmitx20: Mapped PHY: 0xff600000
231[ 0.492034@3] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
232[ 0.492040@3] hdmitx: hw: alread display in uboot 0x10
233[ 0.492061@3] hdmitx: hw: avmute set to 1
234[ 0.492115@3] hdmitx: system: amhdmitx_probe end
235[ 0.492595@3] vout: create vout attribute OK
236[ 0.492704@3] vout: vout_fops_create OK
237[ 0.492707@3] vout: vout1: register server: nulldisp_vout_server
238[ 0.492724@3] hdmitx: hdmitx_set_current_vmode[3655]
239[ 0.492727@3] hdmitx: system: recalc before 1080p60hz 60 1
240[ 0.492730@3] hdmitx: system: recalc after 1080p60hz 2997 50
241[ 0.492733@3] hdmitx: system: get current mode: 1080p60hz
242[ 0.492736@3] hdmitx: system: update rx hdr info 0
243[ 0.492738@3] hdmitx: system: update physcial size: 16 9
244[ 0.492752@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
245[ 0.492755@3] vout: init mode 1080p60hz set ok
246[ 0.492807@3] vout: aml_tvout_mode_monitor
247[ 0.492814@3] vout: aml_vout_probe OK
248[ 0.492944@3] chip type:0x29
249[ 0.493231@3] Advanced Linux Sound Architecture Driver Initialized.
250[ 0.493847@3] NetLabel: Initializing
251[ 0.493849@3] NetLabel: domain hash size = 128
252[ 0.493851@3] NetLabel: protocols = UNLABELED CIPSOv4
253[ 0.493886@3] NetLabel: unlabeled traffic allowed by default
254[ 0.494946@3] clocksource: Switched to clocksource arch_sys_counter
255[ 0.499176@0] hdmitx: system: irq 80000004 0
256[ 0.519177@0] hdmitx: system: irq 80000002 0
257[ 0.532053@3] VFS: Disk quotas dquot_6.6.0
258[ 0.532094@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
259[ 0.538322@3] NET: Registered protocol family 2
260[ 0.538669@3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
261[ 0.538827@3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
262[ 0.539037@3] TCP: Hash tables configured (established 32768 bind 32768)
263[ 0.539086@3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
264[ 0.539116@3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
265[ 0.539257@3] NET: Registered protocol family 1
266[ 0.540787@3] Unpacking initramfs...
267[ 0.548519@3] Freeing initrd memory: 4676K
268[ 0.549453@3] hw perfevents: clusterb_enabled = 1
269[ 0.549457@3] hw perfevents: cpumasks 0x3, 0x3c
270[ 0.549480@3] hw perfevents: cluster A irq = 18
271[ 0.549503@3] hw perfevents: cluster B irq = 19
272[ 0.549550@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
273[ 0.551183@5] audit: initializing netlink subsys (disabled)
274[ 0.551235@5] audit: type=2000 audit(0.504:1): initialized
275[ 0.551760@5] workingset: timestamp_bits=46 max_order=20 bucket_order=0
276[ 0.557463@5] squashfs: version 4.0 (2009/01/31) Phillip Lougher
277[ 0.557600@5] Registering sdcardfs 0.1
278[ 0.558341@5] SELinux: Registering netfilter hooks
279[ 0.560840@3] NET: Registered protocol family 38
280[ 0.560847@3] Key type asymmetric registered
281[ 0.560850@3] Asymmetric key parser 'x509' registered
282[ 0.560968@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
283[ 0.560973@3] io scheduler noop registered (default)
284[ 0.560975@3] io scheduler deadline registered
285[ 0.561063@3] io scheduler cfq registered
286[ 0.561356@3] pwm-gpio pwmgpio: 1 gpio pwms loaded
287[ 0.561950@3] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
288[ 0.562178@3] meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl
289[ 0.562685@4] random: fast init done
290[ 0.562710@4] random: crng init done
291[ 0.562886@3] gpiomem-aml ff634000.gpiomem: Initialised: Registers at 0xff634000
292[ 0.562979@3] [drm] Initialized
293[ 0.563039@3] mali ffe40000.bifrost: Continuing without Mali regulator control
294[ 0.563089@3] mali ffe40000.bifrost: max pp is 2
295[ 0.563092@3] mali ffe40000.bifrost: set min pp to default 1
296[ 0.563095@3] mali ffe40000.bifrost: min pp is 1
297[ 0.563098@3] mali ffe40000.bifrost: min clk is 4
298[ 0.563110@3] mali ffe40000.bifrost: hiu io source 0xffffff80084d8000
299[ 0.563116@3] mali ffe40000.bifrost: hiu io source 0xffffff80084da000
300[ 0.563119@3] mali ffe40000.bifrost: num of pp used most of time 1
301[ 0.563123@3] mali ffe40000.bifrost: clock dvfs cfg table size is 6
302[ 0.563142@3] mali ffe40000.bifrost: max clk set 4
303[ 0.563144@3] mali ffe40000.bifrost: max clk is 4
304[ 0.563147@3] mali ffe40000.bifrost: turbo clk set to 5
305[ 0.563150@3] mali ffe40000.bifrost: turbo clk is 5
306[ 0.563153@3] mali ffe40000.bifrost: default clk set to 4
307[ 0.563155@3] mali ffe40000.bifrost: default clk is 4
308[ 0.563161@3] mali ffe40000.bifrost: ====================0====================
309[ 0.563161@3] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
310[ 0.563166@3] mali ffe40000.bifrost: ====================1====================
311[ 0.563166@3] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
312[ 0.563171@3] mali ffe40000.bifrost: ====================2====================
313[ 0.563171@3] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
314[ 0.563176@3] mali ffe40000.bifrost: ====================3====================
315[ 0.563176@3] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
316[ 0.563180@3] mali ffe40000.bifrost: ====================4====================
317[ 0.563180@3] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
318[ 0.563184@3] mali ffe40000.bifrost: ====================5====================
319[ 0.563184@3] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
320[ 0.563187@3] mali ffe40000.bifrost: clock dvfs table size is 6
321[ 0.563258@3] mali_plat=ffffff800a9fbd90
322[ 0.563347@3] meson_gcooldev is null, no set min status
323[ 0.563349@3] gpu cooling register okay with err=0
324[ 0.563393@3] meson_gcooldev is null, no set min status
325[ 0.563395@3] gpu core cooling register okay with err=0
326[ 0.563415@3] shader_present=3, tiler_present=1, l2_present=1
327[ 0.563499@3] Mali_pwr_on:gpu_irq : 200
328[ 0.563699@3] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
329[ 0.564000@3] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
330[ 0.564712@3] mali ffe40000.bifrost: Probed as mali0
331[ 0.564942@3] Unable to detect cache hierarchy for CPU 0
332[ 0.568192@3] loop: module loaded
333[ 0.568462@3] mtdoops: mtd device (mtddev=name/number) must be supplied
334[ 0.568769@3] libphy: Fixed MDIO Bus: probed
335[ 0.569288@3] REG0:Addr = ffffff80084de540
336[ 0.569297@3] Not set cali_val for REG1
337[ 0.569550@3] meson6-dwmac ff3f0000.ethernet: no reset control found
338[ 0.569553@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
339[ 0.569555@3] Ring mode enabled
340[ 0.569557@3] DMA HW capability register supported
341[ 0.569559@3] Normal descriptors
342[ 0.569560@3] RX Checksum Offload Engine supported
343[ 0.569562@3] COE Type 2
344[ 0.569563@3] TX Checksum insertion supported
345[ 0.569564@3] Wake-Up On Lan supported
346[ 0.569589@3] eth%d: device MAC address 00:1e:06:42:13:a8
347[ 0.569591@3] Enable RX Mitigation via HW Watchdog Timer
348[ 0.571884@3] libphy: stmmac: probed
349[ 0.571888@3] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
350[ 0.571892@3] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
351[ 0.572868@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
352[ 0.572872@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
353[ 0.573152@3] usbcore: registered new interface driver cdc_acm
354[ 0.573154@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
355[ 0.573188@3] usbcore: registered new interface driver usb-storage
356[ 0.573247@3] usbcore: registered new interface driver usbserial
357[ 0.573278@3] usbcore: registered new interface driver usbserial_generic
358[ 0.573303@3] usbserial: USB Serial support registered for generic
359[ 0.573528@3] mousedev: PS/2 mouse device common for all mice
360[ 0.573742@3] i2c /dev entries driver
361[ 0.574912@2] ledtrig-cpu: registered to indicate activity on CPUs
362[ 0.575178@2] hidraw: raw HID events driver (C) Jiri Kosina
363[ 0.575372@2] usbcore: registered new interface driver usbhid
364[ 0.575373@2] usbhid: USB HID core driver
365[ 0.575727@2] value of voltage_tolerance 0
366[ 0.576252@2] dvfs [meson_cpufreq_init] - cluster 0 freq 1992000
367[ 0.576262@2] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
368[ 0.577096@2] value of voltage_tolerance 0
369[ 0.577677@2] dvfs [meson_cpufreq_init] - cluster 1 freq 1908000
370[ 0.577680@2] dvfs [meson_cpufreq_init] - cluster 1 freq 2004000
371[ 0.577700@2] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
372[ 0.577717@2] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
373[ 0.579664@2] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
374[ 0.581400@2] ff803000.serial: clock gate not found
375[ 0.581432@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80084f3000
376[ 0.581452@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 33, base_baud = 1500000) is a meson_uart
377[ 0.581460@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
378[ 0.627002@2] console [ttyS0] enabled
379[ 0.627586@2] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80084f5000
380[ 0.627739@2] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80084fd080
381[ 0.634043@2] rtc-pcf8563 3-0051: rtc core: registered rtc-pcf8563 as rtc0
382[ 0.635632@2] gpio-keypad ff800000.gpio_keypad: failed to get gpio index from dts
383[ 0.637475@2] gpio-keypad: probe of ff800000.gpio_keypad failed with error -22
384[ 0.637487@2] meson-remote: Driver init
385[ 0.637565@2] meson-remote: remote_probe
386[ 0.637572@2] meson-remote ff808040.meson-remote: protocol = 0x1
387[ 0.637574@2] meson-remote ff808040.meson-remote: led_blink = 1
388[ 0.637576@2] meson-remote ff808040.meson-remote: led_blink_frq = 100
389[ 0.637587@2] meson-remote ff808040.meson-remote: platform_data irq =72
390[ 0.637590@2] meson-remote ff808040.meson-remote: get_custom_tables:don't find match custom
391[ 0.645802@2] meson-remote ff808040.meson-remote: default protocol = 0x1 and id = 0
392[ 0.645805@2] meson-remote ff808040.meson-remote: reg=0x0, val=0x1f40190
393[ 0.645807@2] meson-remote ff808040.meson-remote: reg=0x4, val=0x12c00c8
394[ 0.645809@2] meson-remote ff808040.meson-remote: reg=0x8, val=0x960050
395[ 0.645811@2] meson-remote ff808040.meson-remote: reg=0xc, val=0x480028
396[ 0.645812@2] meson-remote ff808040.meson-remote: reg=0x10, val=0x70fa0013
397[ 0.645814@2] meson-remote ff808040.meson-remote: reg=0x18, val=0x8616800
398[ 0.645815@2] meson-remote ff808040.meson-remote: reg=0x1c, val=0x9f00
399[ 0.645817@2] meson-remote ff808040.meson-remote: reg=0x20, val=0x0
400[ 0.645819@2] meson-remote ff808040.meson-remote: reg=0x24, val=0x0
401[ 0.645820@2] meson-remote ff808040.meson-remote: reg=0x28, val=0x0
402[ 0.646038@2] input: aml_keypad as /devices/platform/ff808040.meson-remote/input/input0
403[ 0.646175@2] meson-remote: IR XMP protocol handler initialized
404[ 0.646327@2] efusekeynum: 1
405[ 0.646340@2] efusekeyname: uuid offset: 0 size: 32
406[ 0.646406@2] efuse efuse: probe OK!
407[ 0.647182@3] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
408[ 0.647367@3] ge2d: ge2d_init_module
409[ 0.647457@3] ge2d: ge2d_dev major:236
410[ 0.647559@3] ge2d: clock source clk_ge2d_gate ffffffc0dcb43400
411[ 0.647573@3] ge2d: clock clk_ge2d source ffffffc0dcb43480
412[ 0.647582@3] ge2d: clock source clk_vapb_0 ffffffc0dcb43500
413[ 0.647584@3] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
414[ 0.647636@3] ge2d: ge2d clock is 499 MHZ
415[ 0.647640@3] ge2d: find address resource
416[ 0.647647@3] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008690000
417[ 0.647649@3] ge2d: reserved mem init failed
418[ 0.647650@3] ge2d: ge2d: pdev=ffffffc0dd5db400, irq=45, clk=ffffffc0dcb43400
419[ 0.647669@3] ge2d: ge2d start monitor
420[ 0.647700@4] ge2d: ge2d workqueue monitor start
421[ 0.647880@3] amvideom vsync irq: 46
422[ 0.648197@3] amvideocap_probe,amvideocap
423[ 0.649777@3] use cma buf.
424[ 0.652545@3] fb: osd_init_module
425[ 0.652684@3] fb: viu vsync irq: 46
426[ 0.652690@3] fb: viu2 vsync irq: 55
427[ 0.652731@3] 0x000000d8:Y=d8,U=0,V=0
428[ 0.652733@3] 0x000000d9:Y=d9,U=0,V=0
429[ 0.652734@3] 0x000000da:Y=da,U=0,V=0
430[ 0.652735@3] 0x000000db:Y=db,U=0,V=0
431[ 0.652885@3] fb: osd_rdma_init: rdma_table p=0xe2a08000,op=0xe2a08000 , v=0xffffff8008633000
432[ 0.652898@3] rdma_register, rdma_table_addr ffffff8008635000 rdma_table_addr_phy e2a09000 reg_buf ffffffc0dcb2d000
433[ 0.652900@3] rdma_register success, handle 2 table_size 4096
434[ 0.652901@3] fb: osd_rdma_init:osd rdma handle = 2.
435[ 0.652907@3] fb: mem_size: 0x800000
436[ 0.652908@3] fb: mem_size: 0x4b80000
437[ 0.652908@3] fb: mem_size: 0x100000
438[ 0.652909@3] fb: mem_size: 0x100000
439[ 0.652910@3] fb: mem_size: 0x800000
440[ 0.652942@3] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
441[ 0.652944@3] fb: reserved memory base:0x0000000077800000, size:800000
442[ 0.653012@3] fb: fb def : 1920 1080 1920 2160 32
443[ 0.653013@3] fb: init fbdev bpp is:32
444[ 0.663800@3] fb: osd[0] enable: 1 (swapper/0)
445[ 0.680860@3] fb: set osd0 reverse as NONE
446[ 0.697167@3] fb: osd probe OK
447[ 0.697264@3] hdmitx: hdcp: hdmitx_hdcp_init
448[ 0.697607@3] vout: vout2: create vout2 attribute OK
449[ 0.697691@3] vout: vout2: vout2_fops_create OK
450[ 0.697693@3] vout: vout2: register server: nulldisp_vout2_server
451[ 0.697698@3] vout: vout2: init mode null set ok
452[ 0.697790@3] vout: vout2: clktree_init
453[ 0.697836@3] vout: vout2: aml_vout2_probe OK
454[ 0.697871@3] DI: di_module_init ok.
455[ 0.697873@3] DI: di_module_init: major 509
456[ 0.698044@3] deinterlace deinterlace: assigned reserved memory node linux,di_cma
457[ 0.698047@3] DI: CMA size 0x2800000.
458[ 0.698057@3] pre_irq:70
459[ 0.698061@3] post_irq:71
460[ 0.698062@3] DI: di_probe allocate rdma channel 0.
461[ 0.698065@3] di_get_vpu_clkb: get clk vpu error.
462[ 0.698091@3] DI: vpu clkb <334000000, 667000000>
463[ 0.698109@3] DI:enable vpu clkb.
464[ 0.698114@3] 0x000000dc:Y=dc,U=0,V=0
465[ 0.698116@3] 0x000000dd:Y=dd,U=0,V=0
466[ 0.698117@3] 0x000000de:Y=de,U=0,V=0
467[ 0.698118@3] 0x000000df:Y=df,U=0,V=0
468[ 0.698119@3] 0x000000e0:Y=e0,U=0,V=0
469[ 0.698120@3] 0x000000e1:Y=e1,U=0,V=0
470[ 0.698121@3] 0x000000e2:Y=e2,U=0,V=0
471[ 0.698122@3] 0x000000e3:Y=e3,U=0,V=0
472[ 0.698123@3] 0x000000f0:Y=f0,U=0,V=0
473[ 0.698123@3] 0x000000f1:Y=f1,U=0,V=0
474[ 0.698126@3] 0x000000f2:Y=f2,U=0,V=0
475[ 0.698127@3] 0x000000f3:Y=f3,U=0,V=0
476[ 0.698128@3] 0x000000f4:Y=f4,U=0,V=0
477[ 0.698129@3] 0x000000f5:Y=f5,U=0,V=0
478[ 0.698130@3] 0x000000f6:Y=f6,U=0,V=0
479[ 0.698131@3] 0x000000f7:Y=f7,U=0,V=0
480[ 0.698133@3] 0x000000f8:Y=f8,U=0,V=0
481[ 0.698134@3] 0x000000f9:Y=f9,U=0,V=0
482[ 0.698135@3] 0x000000fa:Y=fa,U=0,V=0
483[ 0.698135@3] 0x000000fb:Y=fb,U=0,V=0
484[ 0.698136@3] 0x000000fc:Y=fc,U=0,V=0
485[ 0.698137@3] 0x000000fd:Y=fd,U=0,V=0
486[ 0.698139@3] 0x000000fe:Y=fe,U=0,V=0
487[ 0.698140@3] DI: support post write back 254.
488[ 0.698210@3] DI: di_probe:Di use HRTIMER
489[ 0.698304@3] di_probe:ok
490[ 0.698343@3] vdin_drv_init: major 508
491[ 0.698400@3] vdin_drv_init: vdin driver init done
492[ 0.698402@3] [viuin..]viuin_init_module viuin module init
493[ 0.698507@3] [viuin..]viuin_probe probe ok.
494[ 0.698688@3] [RX]-hdmirx: hdmirx_init.
495[ 0.698689@3] ESM HLD: Initializing...
496[ 0.698788@3] tvin_afe: tvafe_drv_init: major 506
497[ 0.698910@3] tvin_afe: tvafe_drv_init.
498[ 0.698988@3] tvafe_vbi: vbi: vbi_init.
499[ 0.699055@3] PPMGRDRV: warn: ppmgr module init func called
500[ 0.699100@3] PPMGRDRV: err: ppmgr_driver_probe called
501[ 0.702265@3] Reserved memory: failed to init DMA memory pool at 0x00000000ed800000, size 0 MiB
502[ 0.710951@3] PPMGRDRV: info: ppmgr_dev major:504
503[ 0.711483@0] videosync_create_instance dev_s ffffffc0dd6fb800,dev_s->dev ffffffc0dc93eb80
504[ 0.711488@0] videosync_create_instance reg videosync.0
505[ 0.711575@0] aml_vecm_init:module init
506[ 0.711594@1] videosync_thread started
507[ 0.711732@0]
508[ 0.711732@0] VECM probe start
509[ 0.711979@0] Can't find wb_sel.
510[ 0.711981@0] hdr:Can't find cfg_en_osd_100.
511[ 0.711982@0] Can't find tx_op_color_primary.
512[ 0.711986@0] amlogic, vecm
513[ 0.711988@0] vlock dt support: 1
514[ 0.711989@0] vlock dt new_fsm: 0
515[ 0.711991@0] vlock dt hwver: 0
516[ 0.711992@0] vlock dt phlock_en: 0
517[ 0.711993@0] Can't find vlock_en.
518[ 0.711995@0] Can't find vlock_mode.
519[ 0.711996@0] Can't find vlock_pll_m_limit.
520[ 0.711997@0] Can't find vlock_line_limit.
521[ 0.712004@0] param_config vlock_en:1
522[ 0.712022@0] vlock_status_init vlock_en:0
523[ 0.712023@0] aml_vecm_probe: ok
524[ 0.712484@0] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
525[ 0.713127@0] meson-mmc: >>>>>>>>hostbase ffffff8008683000, dmode
526[ 0.717543@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
527[ 0.717546@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
528[ 0.754969@0] meson-mmc: meson_mmc_probe() : success!
529[ 0.758781@0] meson-mmc: >>>>>>>>hostbase ffffff800868c000, dmode
530[ 0.759393@0] meson-mmc: gpio_cd = 1ca
531[ 0.798959@0] meson-mmc: meson_mmc_probe() : success!
532[ 0.799121@0] amlogic mtd driver init
533[ 0.799653@0] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25
534[ 0.799653@0]
535[ 0.802036@0] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
536[ 0.808513@1] cectx ff80023c.aocec: cecb_ver:0x1
537[ 0.812513@1] cectx ff80023c.aocec: line_reg:0x1
538[ 0.817110@1] cectx ff80023c.aocec: line_bit:0x3
539[ 0.821734@1] cectx ff80023c.aocec: ee_to_ao:0x1
540[ 0.826472@1] input: cec_input as /devices/virtual/input/input1
541[ 0.826595@1] cectx ff80023c.aocec: not find 'port_num'
542[ 0.831528@3] cectx ff80023c.aocec: using cec:1
543[ 0.836014@3] cectx ff80023c.aocec: no hdmirx regs
544[ 0.840775@3] cectx ff80023c.aocec: no hhi regs
545[ 0.845270@3] cectx ff80023c.aocec: not find 'output'
546[ 0.851778@3] cectx ff80023c.aocec: irq cnt:2
547[ 0.854747@3] cectx ff80023c.aocec: wakeup_reason:0x0
548[ 0.859710@3] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
549[ 0.865201@3] cectx ff80023c.aocec: aml_cec_probe success end
550[ 0.871076@3] unifykey: storage in base: 0xffffffc005000000
551[ 0.871077@3] unifykey: storage out base: 0xffffffc005040000
552[ 0.871078@3] unifykey: storage block base: 0xffffffc005080000
553[ 0.871079@3] unifykey: probe done!
554[ 0.871206@3] unifykey: aml_unifykeys_init done!
555[ 0.871233@3] meson ts init
556[ 0.871252@3] tsensor id: 0
557[ 0.871313@3] tsensor trim info: 0xda000037!
558[ 0.871315@3] tsensor hireboot: 0xc0ff2a70
559[ 0.871346@3] meson ts init
560[ 0.871356@3] tsensor id: 1
561[ 0.871400@3] tsensor trim info: 0xda000047!
562[ 0.871415@3] tsensor hireboot: 0xc0ff2a40
563[ 0.871511@3] audio_dsp: [dsp]register dsp to char divece(257)
564[ 0.871611@3] amaudio: amaudio: driver amaudio init!
565[ 0.871770@3] amaudio: amaudio_init - amaudio: driver amaudio succuess!
566[ 0.871952@3] sysled: module init
567[ 0.872048@3] meson_wdt ffd0f0d0.watchdog: start watchdog
568[ 0.872050@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
569[ 0.872166@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
570[ 0.872378@3] amlogic rfkill init
571[ 0.872545@3] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
572[ 0.872547@3] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
573[ 0.873055@3] dmc_monitor_probe
574[ 0.873341@3] defendkey ff630218.defendkey: Reserved memory is not enough!
575[ 0.877777@3] defendkey: probe of ff630218.defendkey failed with error -22
576[ 0.877918@3] No find node.
577[ 0.880551@3] register clk_set_setting cpu[41]
578[ 0.880618@3] Registered firmware driver success.
579[ 0.881001@3] Try to load video/h264_enc.bin ...
580[ 0.881026@3] load firmware size : 76288, Name : video/h264_enc.bin.
581[ 0.881031@3] the fw pack ver v0.0 is too lower.
582[ 0.881032@3] it may work abnormally so need to be update in time.
583[ 0.881402@3] Try to load video/video_ucode.bin ...
584[ 0.881848@3] load firmware size : 1671680, Name : video/video_ucode.bin.
585[ 0.885825@3] ammvdec_mpeg4_driver_init_module
586[ 0.885860@3] amvdec_vc1 module init
587[ 0.885894@3] amvdec_h264 module init
588[ 0.885968@3] ammvdec_h264 module init
589[ 0.886002@3] amvdec_h265 module init
590[ 0.886064@3] amvdec_vp9 module init
591[ 0.886278@3] amvdec_avs module init
592[ 0.886373@3] amvenc_avc_probe -- reserved memory config fail.
593[ 0.886374@3] amvenc_avc - cma memory pool size: 60 MB
594[ 0.886384@3] encode_wq_init.
595[ 0.886387@3] encode start monitor.
596[ 0.886418@4] encode workqueue monitor start.
597[ 0.886540@3] vpu_init
598[ 0.886586@3] vpu_probe
599[ 0.886588@3] HevcEnc reserved memory config fail.
600[ 0.886590@3] HevcEnc - cma memory pool size: 64 MB
601[ 0.886597@3] HevcEnc - wave420l_irq: 53
602[ 0.886623@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff80086b8000
603[ 0.886729@3] success to probe vpu device with video memory from cma
604[ 0.886832@3] Amlogic A/V streaming port init
605[ 0.887625@4] get gate demux control ok ffffffc0dd331400
606[ 0.887634@4] get gate parser_top control ok ffffffc0dd673180
607[ 0.887653@4] get gate vdec control ok ffffffc0dd673d40
608[ 0.887657@4] get gate clk_81 control failed (null)
609[ 0.887680@4] get gate clk_vdec_mux control ok ffffffc0dd673b00
610[ 0.887705@4] get gate clk_hcodec_mux control ok ffffffc0dd673080
611[ 0.887735@4] get gate clk_hevc_mux control ok ffffffc0dd673300
612[ 0.887768@4] get gate clk_hevcb_mux control ok ffffffc0dd673dc0
613[ 0.887782@4] get gate ahbarb0 control ok ffffffc0dd673100
614[ 0.887784@4] get gate asyncfifo control failed (null)
615[ 0.887960@5] bl301_manager: driver init
616[ 0.887962@5] bl301_manager: IR remote wake-up code: 0x23dc4db2
617[ 0.887963@5] bl301_manager: IR remote wake-up code mask: 0xffffffff
618[ 0.887965@5] bl301_manager: IR remote wake-up code protocol: 0x0
619[ 0.887966@5] bl301_manager: enable 5V system power on suspend/power off state: 0
620[ 0.890425@0] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
621[ 0.890429@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
622[ 0.890431@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
623[ 0.890434@0] meson-mmc: Data 1 aligned delay is 0
624[ 0.890436@0] meson-mmc: emmc: clk 199999997 tuning start
625[ 0.891842@0] meson-mmc: emmc: rx_tuning_result[0] = 40
626[ 0.891861@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
627[ 0.893696@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
628[ 0.901656@0] meson-mmc: emmc: rx_tuning_result[3] = 40
629[ 0.902325@0] meson-mmc: emmc: rx_tuning_result[4] = 40
630[ 0.902328@0] meson-mmc: emmc: best_win_start =3, best_win_size =3
631[ 0.902330@0] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
632[ 0.902398@0] emmc: new HS200 MMC card at address 0001
633[ 0.902401@0] emmc: clock 199999997, 8-bit-bus-width
634[ 0.902401@0]
635[ 0.906861@0] mmcblk0: emmc:0001 AJTD4R 14.6 GiB
636[ 0.911146@0] mmcblk0boot0: emmc:0001 AJTD4R partition 1 4.00 MiB
637[ 0.911328@0] mmcblk0boot1: emmc:0001 AJTD4R partition 2 4.00 MiB
638[ 0.911503@0] mmcblk0rpmb: emmc:0001 AJTD4R partition 3 4.00 MiB
639[ 0.912100@0] mmcblk0: p1 p2
640[ 0.913835@5] usbcore: registered new interface driver snd-usb-audio
641[ 0.914430@5] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
642[ 0.914469@5] T9015 acodec used by auge, tdmout:2
643[ 0.915059@5] Error: Driver 'spdif-dit' is already registered, aborting...
644[ 0.916484@5] asoc debug: aml_audio_controller_probe-116
645[ 0.917166@5] asoc-aml-card auge_sound: aml_card_probe, parse error -517
646[ 0.922993@5] aml_card_probe error ret:-517
647[ 0.927284@5] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
648[ 0.927291@5] TDM id 2 i2s2hdmi:0
649[ 0.927296@5] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 1, lane_oe_mask_out = 0
650[ 0.927427@5] snd_tdm ff642000.audiobus:tdmc: aml_tdm_get_pins error!
651[ 0.927428@5] No channel mask node Channel_Mask
652[ 0.927683@5] aml_spdif_platform_probe, spdif ID = 0
653[ 0.927841@5] SPDIF id 0 asrc_id:0 auto_asrc:0
654[ 0.927896@5] spdifout_play_with_zerodata, spdif id:0 enable:0
655[ 0.927898@5] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
656[ 0.927903@5] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
657[ 0.927907@5] hdmitx: audio: aout notify format CT_PCM
658[ 0.927909@5] hdmitx: hw: set audio
659[ 0.927913@5] hdmitx: hw: hdmitx tx_aud_src = 0
660[ 0.927923@5] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
661[ 0.927925@5] hdmitx: hw: aud_n_para = 5824
662[ 0.927931@5] hdmitx: hw: set channel status
663[ 0.927959@5] hdmitx: audio: Audio Type: PCM
664[ 0.927960@5] hdmitx: audio: set audio param
665[ 0.927962@5] spdif_a is set to enable
666[ 0.927967@5] aml_spdif_platform_probe, register soc platform
667[ 0.927981@5] aml_spdif_platform_probe, spdif ID = 1
668[ 0.928020@5] spdifout_play_with_zerodata, spdif id:1 enable:0
669[ 0.928022@5] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
670[ 0.928025@5] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
671[ 0.928028@5] spdif_b is set to enable
672[ 0.928032@5] aml_spdif_platform_probe, register soc platform
673[ 0.928297@5] audio_ddr_mngr: 0, irqs toddr 34, frddr 37
674[ 0.928299@5] audio_ddr_mngr: 1, irqs toddr 35, frddr 38
675[ 0.928300@5] audio_ddr_mngr: 2, irqs toddr 36, frddr 39
676[ 0.928411@5] audiolocker_platform_probe
677[ 0.929093@5] Register vad
678[ 0.929207@5] Netfilter messages via NETLINK v0.30.
679[ 0.929272@5] Initializing XFRM netlink socket
680[ 0.929280@5] NET: Registered protocol family 17
681[ 0.929297@5] Key type dns_resolver registered
682[ 0.929748@5] Registered swp emulation handler
683[ 0.929756@5] Registered cp15_barrier emulation handler
684[ 0.929761@5] Registered setend emulation handler
685[ 0.930107@5] registered taskstats version 1
686[ 1.034949@3] hdmitx: system: plugin
687[ 1.036966@3] hdmitx: hdmitx: ddc rd8b error 0x50 0x00 0x00
688[ 1.138993@5] aml_dai_spdif_probe
689[ 1.138998@5] aml_dai_spdif_probe
690[ 1.139005@5] set normal 512 fs /4 fs
691[ 1.139025@5] set spdifout clk:6144000, mpll:24576000
692[ 1.139027@5] get spdifout clk:6143997, mpll:24575987
693[ 1.139031@5] aml_dai_set_spdif_fmt , fmt 0x4010
694[ 1.139080@5] aml_spdif_new spdif_b, clk continuous:1
695[ 1.139082@5] spdifout_play_with_zerodata_free, spdif id:1
696[ 1.139287@5] asoc-aml-card auge_sound: dit-hifi <-> SPDIF-B mapping ok
697[ 1.139297@5] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
698[ 1.139300@5] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
699[ 1.139301@5] lanes_out_cnt(1), lanes_in_cnt(1)
700[ 1.139302@5] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
701[ 1.139302@5] lanes_lb_cnt(0)
702[ 1.139303@5] slots(2), slot_width(32)
703[ 1.139308@5] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0dd6f7318, id(2), clksel(2)
704[ 1.139311@5] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
705[ 1.139554@5] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-C mapping ok
706[ 1.139555@5] set normal 512 fs /4 fs
707[ 1.139565@5] set spdifout clk:6144000, mpll:24576000
708[ 1.139567@5] get spdifout clk:6143997, mpll:24575987
709[ 1.139568@5] aml_dai_set_spdif_fmt , fmt 0x4010
710[ 1.139598@5] aml_spdif_new spdif_a, clk continuous:1
711[ 1.139599@5] spdifout_play_with_zerodata_free, spdif id:0
712[ 1.139728@5] asoc-aml-card auge_sound: dit-hifi <-> SPDIF mapping ok
713[ 1.140167@5] snd_card_add_kcontrols card:ffffffc0dd0fe018
714[ 1.140172@5] effect_v2 is not init
715[ 1.140174@5] Not init vad
716[ 1.140175@5] Failed to add VAD controls
717[ 1.140185@5] eq/drc v1 function enable
718[ 1.166163@3] hdmitx: edid: EDID Parser:
719[ 1.166168@3] hdmitx: edid: get dtd0 vic: 16
720[ 1.166171@3] hdmitx: edid: dump_dtd_info[1908]
721[ 1.166172@3] hdmitx: edid: pixel_clock: 8550
722[ 1.166173@3] hdmitx: edid: h_active: 1366
723[ 1.166174@3] hdmitx: edid: h_blank: 426
724[ 1.166175@3] hdmitx: edid: v_active: 768
725[ 1.166176@3] hdmitx: edid: v_blank: 30
726[ 1.166176@3] hdmitx: edid: h_sync_offset: 70
727[ 1.166177@3] hdmitx: edid: h_sync: 143
728[ 1.166178@3] hdmitx: edid: v_sync_offset: 3
729[ 1.166179@3] hdmitx: edid: v_sync: 3
730[ 1.166189@3] hdmitx: edid: get dtd1 vic: 20
731[ 1.166190@3] hdmitx: edid: find IEEEOUT
732[ 1.166208@3] hdmitx: edid: check sum valid
733[ 1.166209@3] hdmitx: edid: check sum valid
734[ 1.166211@3] hdmitx: edid: update rx hdr info 0 at edid parsing
735[ 1.166213@3] hdmitx: edid: check sum valid
736[ 1.166214@3] hdmitx: edid: check sum valid
737[ 1.166216@3] hdmitx: edid: blk0 raw data
738[ 1.166231@3] hdmitx: edid:
739[ 1.166231@3] 00ffffffffffff0011ee2f000101010100160103807944780aee91a3544c9926
740[ 1.166231@3] 0f5054bdef80714f81c0810081809500a9c0b3000101023a801871382d40582c
741[ 1.166231@3] 450077f43100001e662156aa51001e30468f330077f43100001e000000fd0018
742[ 1.166231@3] 4b0f5117000a202020202020000000fc0044454e4f4e2d4156520a202020017e
743[ 1.166231@3]
744[ 1.166231@3]
745[ 1.166232@3] hdmitx: edid: blk1 raw data
746[ 1.166247@3] hdmitx: edid:
747[ 1.166247@3] 020343f151901f04130514031220212207160f241e26320f7f073d1ec0150750
748[ 1.166247@3] 5f7e01570600677e00835f000072030c002500b82d21d0080140073f405090a0
749[ 1.166247@3] e2000f011d80d0721c1620102c258077f43100009e011d8018711c1620582c25
750[ 1.166247@3] 0077f43100009e011d00bc52d01e20b828554077f43100001e0000000000006d
751[ 1.166247@3]
752[ 1.166247@3]
753[ 1.166248@3] hdmitx: system: update physcial size: 1210 680
754[ 1.166252@3] hdmitx: system: get current mode: 1080p60hz
755[ 1.166253@3] hdmitx: system: update rx hdr info 0
756[ 1.166254@3] hdmitx: system: update physcial size: 1210 680
757[ 1.166264@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
758[ 1.166266@3] hdmitx: hw: set audio
759[ 1.166267@3] hdmitx: hw: hdmitx tx_aud_src = 0
760[ 1.166278@3] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
761[ 1.166279@3] hdmitx: hw: aud_n_para = 5824
762[ 1.166285@3] hdmitx: hw: set channel status
763[ 1.166313@3] hdmitx: audio: Audio Type: PCM
764[ 1.166991@5] add line-out mute controls
765[ 1.167332@5] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
766[ 1.169925@5] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
767[ 1.169933@5] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
768[ 1.169939@5] usb: xhci: determined sg_tablesize: 4294967295
769[ 1.170098@5] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
770[ 1.170117@5] xhci-hcd xhci-hcd.0.auto: irq 23, io mem 0xff500000
771[ 1.170179@5] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
772[ 1.170182@5] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
773[ 1.170184@5] usb usb1: Product: xHCI Host Controller
774[ 1.170185@5] usb usb1: Manufacturer: Linux 4.9.190 xhci-hcd
775[ 1.170187@5] usb usb1: SerialNumber: xhci-hcd.0.auto
776[ 1.170403@5] hub 1-0:1.0: USB hub found
777[ 1.170415@5] hub 1-0:1.0: 2 ports detected
778[ 1.170554@5] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
779[ 1.170559@5] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
780[ 1.170562@5] usb: xhci: determined sg_tablesize: 4294967295
781[ 1.170586@5] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
782[ 1.170618@5] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
783[ 1.170620@5] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
784[ 1.170622@5] usb usb2: Product: xHCI Host Controller
785[ 1.170624@5] usb usb2: Manufacturer: Linux 4.9.190 xhci-hcd
786[ 1.170625@5] usb usb2: SerialNumber: xhci-hcd.0.auto
787[ 1.170808@5] hub 2-0:1.0: USB hub found
788[ 1.170818@5] hub 2-0:1.0: 1 port detected
789[ 1.172267@5] rtc-pcf8563 3-0051: setting system clock to 2019-10-11 14:21:41 UTC (1570803701)
790[ 1.172438@5] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0dd5d2c00)
791[ 1.172451@5] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
792[ 1.172460@5] dwc_otg ff400000.dwc2_a: base=0xffffff8008f00000
793[ 1.172462@5] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0dcba6400
794[ 1.272560@5] dwc_otg: Core Release: 3.30a
795[ 1.272562@5] dwc_otg: Setting default values for core params
796[ 1.272568@5] dwc_otg: curmode: 0, host_only: 0
797[ 1.272579@5] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
798[ 1.284704@5] dwc_otg: Using Buffer DMA mode
799[ 1.284706@5] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
800[ 1.284707@5] dwc_otg: Working on port type = SLAVE
801[ 1.284709@5] dwc_otg: Dedicated Tx FIFOs mode
802[ 1.285986@5] meson_cdev probe
803[ 1.286028@5] meson_cdev index: 0
804[ 1.286103@5] meson_cdev index: 1
805[ 1.286148@5] thermal: no cluster id, cpucore as one cooldev
806[ 1.286160@5] meson_cdev index: 2
807[ 1.286163@5] cpucore_cooling_register, max_cpu_core_num:6
808[ 1.286165@5] cpucore_cooling_register, clutser[1] core num:4
809[ 1.286166@5] cpucore_cooling_register, clutser[0] core num:2
810[ 1.286214@5] meson_cdev index: 3
811[ 1.286225@5] meson_cdev index: 4
812[ 1.286248@5] find tzd id: 0
813[ 1.286348@5] find tzd id: 0
814[ 1.286424@5] find tzd id: 0
815[ 1.286466@5] meson_cdev probe done
816[ 1.286521@5] gxbb_pm: enter meson_pm_probe!
817[ 1.286534@5] gxbb_pm: meson_pm_probe done
818[ 1.287144@5] ALSA device list:
819[ 1.287145@5] #0: AML-AUGESOUND
820[ 1.288415@5] Freeing unused kernel memory: 4800K
821[ 1.316508@4] fb: malloc_osd_memory, cma:ffffff800abc76c8
822[ 1.316512@4] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
823[ 1.316525@4] fb: use ion buffer for fb memory, fb_index=0
824[ 1.343805@1] meson-fb meson-fb: create ion_client ffffffc0dd0d0b40, handle=ffffffc0dd6320c0
825[ 1.343811@1] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
826[ 1.343813@1] fb: Frame buffer memory assigned at
827[ 1.343816@1] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800acba000, size=77312K
828[ 1.343816@1]
829[ 1.343819@1] fb: logo_index=0,fb_index=0
830[ 1.343821@1] fb: ---------------clear fb0 memory ffffff800acba000
831[ 1.369561@2] fb: osd[0] canvas.idx =0x40
832[ 1.369563@2] fb: osd[0] canvas.addr=0xe5800000
833[ 1.369565@2] fb: osd[0] canvas.width=7680
834[ 1.369566@2] fb: osd[0] canvas.height=2160
835[ 1.369567@2] fb: osd[0] frame.width=1920
836[ 1.369568@2] fb: osd[0] frame.height=1080
837[ 1.369569@2] fb: osd[0] out_addr_id =0x1
838[ 1.381287@2] fb: osd_release now.index=0,open_count=1
839[ 1.382219@3] fb: malloc_osd_memory, cma:ffffff800abc76c8
840[ 1.382223@3] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
841[ 1.382225@3] fb: use ion buffer for fb memory, fb_index=1
842[ 1.382629@3] meson-fb meson-fb: create ion_client ffffffc0dd0d0b40, handle=ffffffc0dc67e100
843[ 1.382632@3] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ea400000, size 1 MiB
844[ 1.382633@3] fb: Frame buffer memory assigned at
845[ 1.382635@3] fb: 1, phy: 0x00000000ea400000, vir:0xffffff8008f41000, size=1024K
846[ 1.382635@3]
847[ 1.382637@3] fb: logo_index=0,fb_index=1
848[ 1.382638@3] fb: ---------------clear fb1 memory ffffff8008f41000
849[ 1.383020@3] fb: osd[1] canvas.idx =0x43
850[ 1.383021@3] fb: osd[1] canvas.addr=0xea400000
851[ 1.383022@3] fb: osd[1] canvas.width=128
852[ 1.383023@3] fb: osd[1] canvas.height=32
853[ 1.383024@3] fb: osd[1] frame.width=32
854[ 1.383025@3] fb: osd[1] frame.height=32
855[ 1.383026@3] fb: osd[1] out_addr_id =0x2
856[ 1.398122@0] fb: osd_release now.index=1,open_count=1
857[ 1.414851@0] vfm_map_store:rm default
858[ 1.414851@0]
859[ 1.414903@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
860[ 1.414903@0]
861[ 1.414999@0] fb: osd[0] enable: 1 (sh)
862[ 1.431413@0] fb: osd[1] enable: 0 (sh)
863[ 1.434979@5] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(0) tuning for host cf(xhci_hub_control)--
864[ 1.455605@3] font: no symbol version for module_layout
865[ 1.464653@0] Console: switching to colour frame buffer device 240x67
866[ 1.494971@5] usb 1-1: new high-speed USB device number 2 using xhci-hcd
867[ 1.637343@5] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
868[ 1.637347@5] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
869[ 1.637349@5] usb 1-1: Product: USB2.1 Hub
870[ 1.637351@5] usb 1-1: Manufacturer: GenesysLogic
871[ 1.650847@5] hub 1-1:1.0: USB hub found
872[ 1.651088@5] hub 1-1:1.0: 4 ports detected
873[ 1.725529@0] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
874[ 1.731773@0] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
875[ 1.759268@0] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
876[ 1.781978@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620
877[ 1.781984@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
878[ 1.781987@0] usb 2-1: Product: USB3.1 Hub
879[ 1.781989@0] usb 2-1: Manufacturer: GenesysLogic
880[ 1.795018@0] hub 2-1:1.0: USB hub found
881[ 1.795336@0] hub 2-1:1.0: 4 ports detected
882[ 1.994952@5] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
883[ 2.121444@5] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=cb49
884[ 2.121447@5] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
885[ 2.121449@5] usb 1-1.1: Product: BCM20702A0
886[ 2.121451@5] usb 1-1.1: Manufacturer: Broadcom Corp
887[ 2.121452@5] usb 1-1.1: SerialNumber: BC14EF795F26
888[ 2.130705@5] usb 1-1.1: Unsupported device
889[ 2.130805@5] usb 1-1.1: Unsupported device
890[ 2.130885@5] usb 1-1.1: Unsupported device
891[ 2.130974@5] usb 1-1.1: Unsupported device
892[ 2.234948@5] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd
893[ 2.362187@5] usb 1-1.2: New USB device found, idVendor=0e8f, idProduct=2517
894[ 2.362189@5] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
895[ 2.390187@5] input: HID 0e8f:2517 as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:0E8F:2517.0001/input/input2
896[ 2.447286@5] hid-generic 0003:0E8F:2517.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0e8f:2517] on usb-xhci-hcd.0.auto-1.2/input0
897[ 2.452718@5] input: HID 0e8f:2517 as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:0E8F:2517.0002/input/input3
898[ 2.511193@5] hid-generic 0003:0E8F:2517.0002: input,hidraw1: USB HID v1.10 Mouse [HID 0e8f:2517] on usb-xhci-hcd.0.auto-1.2/input1
899[ 2.614950@5] usb 1-1.3: new high-speed USB device number 5 using xhci-hcd
900[ 2.739625@5] usb 1-1.3: New USB device found, idVendor=13fd, idProduct=0940
901[ 2.739627@5] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
902[ 2.739629@5] usb 1-1.3: Product: External
903[ 2.739631@5] usb 1-1.3: Manufacturer: Generic
904[ 2.739633@5] usb 1-1.3: SerialNumber: 3248433031354B4A30303030
905[ 2.740173@5] usb-storage 1-1.3:1.0: USB Mass Storage device detected
906[ 2.740397@5] scsi host0: usb-storage 1-1.3:1.0
907[ 3.220490@4] cgroup: cgroup2: unknown option "nsdelegate"
908[ 3.223744@4] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
909[ 3.224046@4] systemd[1]: Detected architecture arm64.
910[ 3.226261@4] systemd[1]: Set hostname to <CoreELEC>.
911[ 3.238028@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
912[ 3.238035@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
913[ 3.263518@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
914[ 3.263547@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
915[ 3.280166@2] systemd[1]: Listening on Journal Socket.
916[ 3.280709@2] systemd[1]: Listening on RPCbind Server Activation Socket.
917[ 3.280740@2] systemd[1]: Reached target RPC Port Mapper.
918[ 3.286830@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
919[ 3.297445@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
920[ 3.321479@1] kernel-overlays-setup: setup base modules
921[ 3.395548@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.190
922[ 3.417902@3] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
923[ 3.417992@3] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
924[ 3.418598@0] kernel-overlays-setup: done
925[ 3.454759@5] media: Linux media interface: v0.10
926[ 3.462084@4] Linux video capture interface: v2.00
927[ 3.469719@4] amlvid:info: amlvideo_init called
928[ 3.469723@4] amlvid:info: amlvideo_create_instance called
929[ 3.469727@4] amlvid:info: v4l2_dev.name=:amlvideo-000
930[ 3.469841@5] amlvideo-000: V4L2 device registered as video10
931[ 3.472936@5] wifi_dummy: loading out-of-tree module taints kernel.
932[ 3.473108@5] Triggered SDIO WiFi power on and bus rescan.
933[ 3.473114@5] (NULL device *): [extern_wifi_set_enable] WIFI Disable! 0
934[ 3.576093@4] systemd-journald[2419]: Received request to flush runtime journal from PID 1
935[ 3.677637@2] NET: Registered protocol family 10
936[ 3.758986@5] scsi 0:0:0:0: CD-ROM ASUS SBW-06D2X-U D501 PQ: 0 ANSI: 0
937[ 3.764602@2] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
938[ 3.764607@2] cdrom: Uniform CD-ROM driver Revision: 3.20
939[ 3.764888@4] sr 0:0:0:0: Attached scsi CD-ROM sr0
940[ 3.764994@5] sr 0:0:0:0: Attached scsi generic sg0 type 5
941[ 3.790959@5] (NULL device *): [extern_wifi_set_enable] WIFI Enable! 0
942[ 4.107209@0] meson-mmc: Error: sdio_host is NULL
943[ 4.107217@0] meson-mmc: [sdio_reinit] finish
944[ 4.220699@0] fb: osd_release now.index=0,open_count=1
945[ 4.220810@0] Console: switching to colour dummy device 80x25
946[ 4.296258@4] meson-remote ff808040.meson-remote: add custom_code 0x00007F80 to ir map table
947[ 4.312321@3] Bluetooth: Core ver 2.22
948[ 4.312326@3] Bluetooth: Starting self testing
949[ 4.328355@3] Bluetooth: ECDH test passed in 15640 usecs
950[ 4.359083@2] Bluetooth: SMP test passed in 17 usecs
951[ 4.359101@2] Bluetooth: Finished self testing
952[ 4.359153@2] NET: Registered protocol family 31
953[ 4.359154@2] Bluetooth: HCI device and connection manager initialized
954[ 4.359163@2] Bluetooth: HCI socket layer initialized
955[ 4.359168@2] Bluetooth: L2CAP socket layer initialized
956[ 4.359180@2] Bluetooth: SCO socket layer initialized
957[ 4.389960@4] usbcore: registered new interface driver btusb
958[ 4.403932@5] Bluetooth: hci0: BCM: chip id 73
959[ 4.419893@3] Bluetooth: hci0: BCM20702B
960[ 4.420902@3] Bluetooth: hci0: BCM20702B0 (002.001.014) build 0000
961[ 4.423399@2] bluetooth hci0: Direct firmware load for brcm/BCM20702B0-0a5c-cb49.hcd failed with error -2
962[ 4.423408@2] Bluetooth: hci0: BCM: Patch brcm/BCM20702B0-0a5c-cb49.hcd not found
963[ 4.552437@5] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
964[ 4.552443@5] Bluetooth: BNEP filters: protocol multicast
965[ 4.552452@5] Bluetooth: BNEP socket layer initialized
966[ 4.776322@3] Bluetooth: RFCOMM TTY layer initialized
967[ 4.776349@3] Bluetooth: RFCOMM socket layer initialized
968[ 4.776368@3] Bluetooth: RFCOMM ver 1.11
969[ 4.863313@1] set mac for wol = 00:1e:06:42:13:a8
970[ 4.875149@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
971[ 4.875585@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
972[ 7.109065@3] the demux clock on, ref cnt: 1
973[ 7.109072@3] the parser_top clock on, ref cnt: 1
974[ 7.109074@3] the vdec clock on, ref cnt: 1
975[ 7.109091@3] the clk_hevc_mux clock on, ref cnt: 1
976[ 7.109093@3] the clk_hevcb_mux clock on, ref cnt: 1
977[ 7.109144@3] hevc mux clock is 499999992 Hz
978[ 7.109161@3] hevc back mux clock is 499999992 Hz
979[ 7.109185@3] the clk_vdec_mux clock on, ref cnt: 1
980[ 7.109202@3] vdec mux clock is 499999992 Hz
981[ 7.109246@3] vdec_create instance ffffff800fd61000, total 1
982[ 7.109254@3] vdec_release instance ffffff800fd61000, total 1
983[ 7.109265@3] the clk_hevc_mux clock off, ref cnt: 0
984[ 7.109267@3] the clk_hevcb_mux clock off, ref cnt: 0
985[ 7.109279@3] the clk_vdec_mux clock off, ref cnt: 0
986[ 7.109281@3] the vdec clock off, ref cnt: 0
987[ 7.109283@3] the parser_top clock off, ref cnt: 0
988[ 7.109285@3] the demux clock off, ref cnt: 0
989[ 7.421688@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
990[ 7.422895@1] tdm playback mute: 1, lane_cnt = 4
991[ 7.423535@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
992[ 7.424264@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
993[ 7.425281@1] tdm playback mute: 1, lane_cnt = 4
994[ 7.425382@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
995[ 7.426072@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
996[ 7.426401@1] tdm playback mute: 1, lane_cnt = 4
997[ 7.426504@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
998[ 7.427880@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
999[ 7.428196@1] tdm playback mute: 1, lane_cnt = 4
1000[ 7.428257@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
1001[ 7.428887@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
1002[ 7.429223@1] tdm playback mute: 1, lane_cnt = 4
1003[ 7.429285@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
1004[ 7.444975@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
1005[ 7.446445@1] tdm playback mute: 1, lane_cnt = 4
1006[ 7.446518@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
1007[ 7.447140@2] spdif_a keep clk continuous
1008[ 7.447144@2] aml_spdif_open
1009[ 7.447675@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif
1010[ 7.447958@2] spdif_a keep clk continuous
1011[ 7.447961@2] aml_spdif_close
1012[ 7.448000@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif
1013[ 7.448283@2] spdif_b keep clk continuous
1014[ 7.448285@2] aml_spdif_open
1015[ 7.448350@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
1016[ 7.448862@2] spdif_b keep clk continuous
1017[ 7.448864@2] aml_spdif_close
1018[ 7.448888@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
1019[ 7.455899@0] audio_dsp: buf=0
1020[ 7.455905@0] audio_dsp: IEC958_mode_raw=0
1021[ 7.455936@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1022[ 7.455938@0] audio_dsp: last mode 0,now 0
1023[ 7.459632@0] spdif_b keep clk continuous
1024[ 7.459638@0] aml_spdif_open
1025[ 7.460488@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
1026[ 7.461269@0] set normal 512 fs /4 fs
1027[ 7.461301@0] set spdifout clk:5644800, mpll:22579200
1028[ 7.461303@0] get spdifout clk:5644797, mpll:22579186
1029[ 7.461306@0] aml_dai_set_spdif_fmt , fmt 0x4010
1030[ 7.461308@0] set normal 512 fs /4 fs
1031[ 7.461317@0] set spdifout clk:5644800, mpll:22579200
1032[ 7.461319@0] get spdifout clk:5644797, mpll:22579186
1033[ 7.461387@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1034[ 7.461395@0] hdmitx: hw: set audio
1035[ 7.461397@0] hdmitx: hw: hdmitx tx_aud_src = 0
1036[ 7.461409@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
1037[ 7.461411@0] hdmitx: hw: aud_n_para = 8918
1038[ 7.461418@0] hdmitx: hw: set channel status
1039[ 7.461447@0] hdmitx: audio: Audio Type: PCM
1040[ 7.461449@0] hdmitx: audio: set audio param
1041[ 7.461452@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1042[ 7.487120@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1043[ 7.487132@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1044[ 7.489346@0] spdif_b keep clk continuous
1045[ 7.489355@0] aml_spdif_close
1046[ 7.489446@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
1047[ 7.537366@0] fb: osd_release now.index=0,open_count=1
1048[ 7.547421@1] fb: malloc_osd_memory, cma:ffffff800abc76c8
1049[ 7.547429@1] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
1050[ 7.547431@1] fb: use ion buffer for fb memory, fb_index=2
1051[ 7.548016@1] meson-fb meson-fb: create ion_client ffffffc0dd0d0b40, handle=ffffffc0b0836040
1052[ 7.548020@1] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ea500000, size 1 MiB
1053[ 7.548022@1] fb: Frame buffer memory assigned at
1054[ 7.548025@1] fb: 2, phy: 0x00000000ea500000, vir:0xffffff800fdab000, size=1024K
1055[ 7.548025@1]
1056[ 7.548028@1] fb: logo_index=0,fb_index=2
1057[ 7.548030@1] fb: ---------------clear fb2 memory ffffff800fdab000
1058[ 7.548302@1] fb: osd[2] canvas.idx =0x41
1059[ 7.548304@1] fb: osd[2] canvas.addr=0xea500000
1060[ 7.548305@1] fb: osd[2] canvas.width=128
1061[ 7.548307@1] fb: osd[2] canvas.height=32
1062[ 7.548308@1] fb: osd[2] frame.width=32
1063[ 7.548309@1] fb: osd[2] frame.height=32
1064[ 7.548311@1] fb: osd[2] out_addr_id =0x3
1065[ 7.554211@1] fb: vpu clkc clock is 199 MHZ
1066[ 7.554224@1] fb: malloc_osd_memory, cma:ffffff800abc76c8
1067[ 7.554227@1] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
1068[ 7.554229@1] fb: use ion buffer for fb memory, fb_index=3
1069[ 7.557317@1] meson-fb meson-fb: create ion_client ffffffc0dd0d0b40, handle=ffffffc0b0836e00
1070[ 7.557324@1] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ea600000, size 8 MiB
1071[ 7.557327@1] fb: Frame buffer memory assigned at
1072[ 7.557329@1] fb: 3, phy: 0x00000000ea600000, vir:0xffffff800feac000, size=8192K
1073[ 7.557329@1]
1074[ 7.557332@1] fb: logo_index=0,fb_index=3
1075[ 7.557334@1] fb: ---------------clear fb3 memory ffffff800feac000
1076[ 7.559582@1] fb: osd[3] canvas.idx =0x42
1077[ 7.559586@1] fb: osd[3] canvas.addr=0xea600000
1078[ 7.559588@1] fb: osd[3] canvas.width=128
1079[ 7.559589@1] fb: osd[3] canvas.height=32
1080[ 7.559590@1] fb: osd[3] frame.width=32
1081[ 7.559592@1] fb: osd[3] frame.height=32
1082[ 7.559593@1] fb: osd[3] out_addr_id =0x4
1083[ 7.576296@1] vout: vmode set to null
1084[ 7.576374@1] fb: current vmode=1080p60hz, cmd: 0x10000
1085[ 7.576378@1] vlock: event MODE_CHANGE_PRE 0
1086[ 7.576417@1] vout: new mode null set ok
1087[ 7.576419@1] fb: current vmode=null, cmd: 0x20000
1088[ 7.576493@1] hdmitx: system: set frac_rate_policy as 0
1089[ 7.576515@1] vout: vmode set to 1080p60hz
1090[ 7.576541@1] fb: current vmode=null, cmd: 0x10000
1091[ 7.576546@1] hdmitx: hdmitx_set_current_vmode[3655]
1092[ 7.576548@1] hdmitx: system: recalc before 1080p60hz 2997 50
1093[ 7.576551@1] hdmitx: system: recalc after 1080p60hz 60 1
1094[ 7.576556@1] hdmitx: system: get current mode: 1080p60hz
1095[ 7.576559@1] hdmitx: system: update rx hdr info 0
1096[ 7.576561@1] hdmitx: system: update physcial size: 1210 680
1097[ 7.576589@1] hdmitx: video: already init VIC = 0 Now VIC = 16
1098[ 7.576592@1] hdmitx: hw: div40: 0
1099[ 7.604971@1] hdmitx: ddc w1b error 0x54 0x20 0x00
1100[ 7.604981@1] hdmitx: frac_rate = 0
1101[ 7.604983@1] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 0
1102[ 7.604989@1] hdmitx: config HPLL = 5940000 frac_rate = 0
1103[ 7.605042@1] hdmitx: HPLLv1: 0xdb3a04f7
1104[ 7.605043@1] hdmitx: config HPLL done
1105[ 7.605049@1] hdmitx: set_hpll_od3_clk_div[610] div = 6
1106[ 7.605053@1] hdmitx: j = 4 vid_clk_div = 1
1107[ 7.605059@1] hdmitx: set enc for VIC: 16
1108[ 7.608893@1] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
1109[ 7.738972@1] hdmitx: video: Sink is HDMI device
1110[ 7.738996@1] hdmitx: hw: set audio
1111[ 7.739002@1] hdmitx: hw: hdmitx tx_aud_src = 0
1112[ 7.739014@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
1113[ 7.739016@1] hdmitx: hw: aud_n_para = 6272
1114[ 7.739023@1] hdmitx: hw: set channel status
1115[ 7.739051@1] hdmitx: audio: Audio Type: PCM
1116[ 7.739055@1] vout: new mode 1080p60hz set ok
1117[ 7.739059@1] fb: current vmode=1080p60hz, cmd: 0x20000
1118[ 7.739066@1] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
1119[ 7.739067@1] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
1120[ 7.752506@1] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1121[ 7.752507@1] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1122[ 7.769171@1] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1123[ 7.769173@1] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1124[ 7.785830@1] vlock: event MODE_CHANGE
1125[ 7.787310@3] vout: aml_tvout_mode_work: monitor stop
1126[ 7.803483@0] audio_dsp: buf=0
1127[ 7.803490@0] audio_dsp: IEC958_mode_raw=0
1128[ 7.803523@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1129[ 7.803525@0] audio_dsp: last mode 0,now 0
1130[ 7.808567@0] spdif_b keep clk continuous
1131[ 7.808572@0] aml_spdif_open
1132[ 7.815077@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
1133[ 7.815827@0] set normal 512 fs /4 fs
1134[ 7.815859@0] set spdifout clk:5644800, mpll:22579200
1135[ 7.815862@0] get spdifout clk:5644797, mpll:22579186
1136[ 7.815864@0] aml_dai_set_spdif_fmt , fmt 0x4010
1137[ 7.815868@0] set normal 512 fs /4 fs
1138[ 7.815876@0] set spdifout clk:5644800, mpll:22579200
1139[ 7.815878@0] get spdifout clk:5644797, mpll:22579186
1140[ 7.815927@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1141[ 7.815935@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1142[ 7.816066@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1143[ 7.816071@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1144[ 7.817946@0] spdif_b keep clk continuous
1145[ 7.817953@0] aml_spdif_close
1146[ 7.818052@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
1147[ 8.088633@2] vout: vmode set to null
1148[ 8.088689@2] fb: current vmode=1080p60hz, cmd: 0x10000
1149[ 8.088692@2] vlock: event MODE_CHANGE_PRE 0
1150[ 8.088725@2] vout: new mode null set ok
1151[ 8.088726@2] fb: current vmode=null, cmd: 0x20000
1152[ 8.088787@2] hdmitx: system: set frac_rate_policy as 0
1153[ 8.088799@2] vout: vmode set to 1080p60hz
1154[ 8.088818@2] fb: current vmode=null, cmd: 0x10000
1155[ 8.088822@2] hdmitx: hdmitx_set_current_vmode[3655]
1156[ 8.088823@2] hdmitx: system: recalc before 1080p60hz 60 1
1157[ 8.088825@2] hdmitx: system: recalc after 1080p60hz 60 1
1158[ 8.088830@2] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa632a0 (VIC: 16)
1159[ 8.088831@2] hdmitx: system: get current mode: 1080p60hz
1160[ 8.088833@2] hdmitx: system: update rx hdr info 0
1161[ 8.088834@2] hdmitx: system: update physcial size: 1210 680
1162[ 8.088840@2] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa632a0 (VIC: 16)
1163[ 8.088858@2] hdmitx: video: already init VIC = 0 Now VIC = 16
1164[ 8.088860@2] hdmitx: hw: div40: 0
1165[ 8.115167@0] hdmitx: system: irq 80000001 0
1166[ 8.116952@2] hdmitx: ddc w1b error 0x54 0x20 0x00
1167[ 8.116956@2] hdmitx: frac_rate = 0
1168[ 8.116957@2] hdmitx: hdmitx: set clk: VIC = 16 cd = 5 cs = 2 frac_rate = 0
1169[ 8.116961@2] hdmitx: config HPLL = 3712500 frac_rate = 0
1170[ 8.117014@2] hdmitx: HPLL: 0xdb00049a
1171[ 8.117015@2] hdmitx: config HPLL done
1172[ 8.117018@2] hdmitx: set_hpll_od3_clk_div[610] div = 8
1173[ 8.117022@2] hdmitx: j = 4 vid_clk_div = 1
1174[ 8.117026@2] hdmitx: set enc for VIC: 16
1175[ 8.117036@0] hdmitx: system: irq 80000001 0
1176[ 8.120036@2] hdmitx: hw: config hdmitx IP vic = 16 cd:5 cs: 2
1177[ 8.218952@2] hdmitx: [0x10000104]: 0x00000001
1178[ 8.218956@2] hdmitx: [0x10000180]: 0x000000ff
1179[ 8.218957@2] hdmitx: [0x10000181]: 0x000000ff
1180[ 8.218959@2] hdmitx: [0x10000182]: 0x00000003
1181[ 8.218960@2] hdmitx: [0x10000183]: 0x00000007
1182[ 8.218961@2] hdmitx: [0x10000184]: 0x0000003f
1183[ 8.218963@2] hdmitx: [0x10000185]: 0x00000002
1184[ 8.218964@2] hdmitx: [0x10000187]: 0x000000ff
1185[ 8.218965@2] hdmitx: [0x10000188]: 0x00000003
1186[ 8.251116@0] hdmitx: video: Sink is HDMI device
1187[ 8.251138@0] hdmitx: hw: set audio
1188[ 8.251143@0] hdmitx: hw: hdmitx tx_aud_src = 0
1189[ 8.251154@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
1190[ 8.251156@0] hdmitx: hw: aud_n_para = 6272
1191[ 8.251163@0] hdmitx: hw: set channel status
1192[ 8.251191@0] hdmitx: audio: Audio Type: PCM
1193[ 8.251195@0] vout: new mode 1080p60hz set ok
1194[ 8.251199@0] fb: current vmode=1080p60hz, cmd: 0x20000
1195[ 8.251206@0] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
1196[ 8.251207@0] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
1197[ 8.263543@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1198[ 8.263545@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1199[ 8.280208@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1200[ 8.280210@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1201[ 8.296862@0] vlock: event MODE_CHANGE
1202[ 8.314315@0] audio_dsp: buf=0
1203[ 8.314321@0] audio_dsp: IEC958_mode_raw=0
1204[ 8.314350@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1205[ 8.314352@0] audio_dsp: last mode 0,now 0
1206[ 8.317981@0] spdif_b keep clk continuous
1207[ 8.317986@0] aml_spdif_open
1208[ 8.323072@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
1209[ 8.323834@0] set normal 512 fs /4 fs
1210[ 8.323865@0] set spdifout clk:5644800, mpll:22579200
1211[ 8.323868@0] get spdifout clk:5644797, mpll:22579186
1212[ 8.323870@0] aml_dai_set_spdif_fmt , fmt 0x4010
1213[ 8.323874@0] set normal 512 fs /4 fs
1214[ 8.323882@0] set spdifout clk:5644800, mpll:22579200
1215[ 8.323884@0] get spdifout clk:5644797, mpll:22579186
1216[ 8.323933@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1217[ 8.323941@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1218[ 8.324152@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1219[ 8.324159@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1220[ 8.326008@0] spdif_b keep clk continuous
1221[ 8.326015@0] aml_spdif_close
1222[ 8.326102@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
1223[ 8.971194@1] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
1224[ 8.971223@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1225[ 8.980808@5] 8021q: 802.1Q VLAN Support v1.8
1226[ 11.312286@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1227[ 11.312297@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1228[ 11.312303@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1229[ 11.312310@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 05 59 82 00 00 02 00
1230[ 11.312315@0] blk_update_request: I/O error, dev sr0, sector 1402376
1231[ 11.313097@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1232[ 11.313102@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1233[ 11.313107@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1234[ 11.313111@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 05 59 82 00 00 02 00
1235[ 11.313114@0] blk_update_request: I/O error, dev sr0, sector 1402376
1236[ 11.313118@0] Buffer I/O error on dev sr0, logical block 175297, async page read
1237[ 11.319076@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1238[ 11.319085@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1239[ 11.319091@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1240[ 11.319098@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1241[ 11.319101@0] blk_update_request: I/O error, dev sr0, sector 0
1242[ 11.319890@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1243[ 11.319894@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1244[ 11.319900@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1245[ 11.319904@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1246[ 11.319907@0] blk_update_request: I/O error, dev sr0, sector 0
1247[ 11.319911@0] Buffer I/O error on dev sr0, logical block 0, async page read
1248[ 11.320864@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1249[ 11.320868@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1250[ 11.320873@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1251[ 11.320877@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1252[ 11.320879@0] blk_update_request: I/O error, dev sr0, sector 0
1253[ 11.320881@0] Buffer I/O error on dev sr0, logical block 0, async page read
1254[ 11.321861@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1255[ 11.321865@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1256[ 11.321870@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1257[ 11.321874@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1258[ 11.321876@0] blk_update_request: I/O error, dev sr0, sector 0
1259[ 11.321879@0] Buffer I/O error on dev sr0, logical block 0, async page read
1260[ 11.322866@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1261[ 11.322876@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1262[ 11.322882@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1263[ 11.322889@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1264[ 11.322892@0] blk_update_request: I/O error, dev sr0, sector 0
1265[ 11.322897@0] Buffer I/O error on dev sr0, logical block 0, async page read
1266[ 11.323868@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1267[ 11.323877@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1268[ 11.323883@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1269[ 11.323890@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1270[ 11.323893@0] blk_update_request: I/O error, dev sr0, sector 0
1271[ 11.323897@0] Buffer I/O error on dev sr0, logical block 0, async page read
1272[ 11.324866@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1273[ 11.324874@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1274[ 11.324880@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1275[ 11.324887@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1276[ 11.324889@0] blk_update_request: I/O error, dev sr0, sector 0
1277[ 11.324894@0] Buffer I/O error on dev sr0, logical block 0, async page read
1278[ 11.325861@0] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
1279[ 11.325870@0] sr 0:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
1280[ 11.325876@0] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Illegal mode for this track
1281[ 11.325884@0] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
1282[ 11.325887@0] blk_update_request: I/O error, dev sr0, sector 0
1283[ 11.325891@0] Buffer I/O error on dev sr0, logical block 0, async page read
1284[ 11.326912@0] Buffer I/O error on dev sr0, logical block 0, async page read
1285[ 11.327861@0] Buffer I/O error on dev sr0, logical block 0, async page read
1286[ 43.775262@1] meson-remote ff808040.meson-remote: invalid custom:0x3ec14db2
1287[ 43.775269@1] meson-remote ff808040.meson-remote: cur_custom is nulll
1288[ 43.775272@1] meson-remote ff808040.meson-remote: no valid key to handle
1289[ 44.181998@1] meson-remote ff808040.meson-remote: invalid custom:0x66994db2
1290[ 44.182016@1] meson-remote ff808040.meson-remote: cur_custom is nulll
1291[ 44.182025@1] meson-remote ff808040.meson-remote: no valid key to handle
1292[ 62.548609@3] fb: mem_free_work, free memory: addr:800000
1293CoreELEC:~ #