· 9 years ago · Jan 27, 2017, 01:12 AM
1[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
2[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
3[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-LineageOS-g1e68e82 (albinoman887@chronic-buildbox) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 24 17:31:24 PST 2017
4[ 0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [511f2112] revision 2
5[ 0.000000 / 01-01 00:00:00.000][0] alternatives: detected feature GIC system register CPU interface
6[ 0.000000 / 01-01 00:00:00.000][0] L1_CACHE_BYTES (128) Cache Writeback Granule (128)
7[ 0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
8[ 0.000000 / 01-01 00:00:00.000][0] efi: Getting EFI parameters from FDT:
9[ 0.000000 / 01-01 00:00:00.000][0] efi: UEFI not found.
10[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 40 MiB
11[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
12[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
13[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
14[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
15[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
16[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
17[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
18[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
19[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
20[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
21[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
22[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
24[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
25[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
26[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
27[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
28[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
29[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000088000000, size 105 MiB
30[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
31[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
32[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@c0000000, compatible id removed-dma-pool
33[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 32 MiB at 0x00000000f6800000
34[ 0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 992848
35[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 7428 pages used for memmap
36[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 0 pages reserved
37[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 475392 pages, LIFO batch:31
38[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 8086 pages used for memmap
39[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 517456 pages, LIFO batch:31
40[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
41[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
42[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
43[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
44[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
45[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
46[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 15 pages/cpu @ffffffc0fe30f000 s21888 r8192 d31360 u61440
47[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s21888 r8192 d31360 u61440 alloc=15*4096
48[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
49[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977334
50[ 0.000000 / 01-01 00:00:00.000][0] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff buildvariant=userdebug lge.rev=rev_10 model.name=LG-H918 lge.bootreason=normal cc_mode=0 kswitch lge.bootreasoncode=0x77665501 bootcable.type=400MA lge.battid=SW3800_VC0 androidboot.bl_unlock_complete=true androidboot.dlcomplete=0 androidboot.ddr_size=4294967296 androidboot.ddr_info=0x6 lge.crash_handler=off lge.hreset=off boot_cpus=0-3 androidboot.revision=12 lge.signed_image=false androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.rpmb_state=1 androidboot.bootdevice=624000.ufshc androidboot.serialno=LGH918847ffcc3 qpnp-power-on.warm_boot=1 gpt androidboot.authorized_kernel=true lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
51[ 0.000000 / 01-01 00:00:00.000][0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.rev_10
52[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: Couldn't get bootreason - -22
53[ 0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
54[ 0.000000 / 01-01 00:00:00.000][0] [LGE-CD] boot_cable_setup : Boot cable : 400MA 8
55[ 0.000000 / 01-01 00:00:00.000][0] [LGE-BATT-ID] battery_information_setup : Battery : SW3800_VC0 187
56[ 0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
57[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
58[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
59[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
60[ 0.000000 / 01-01 00:00:00.000][0] Memory: 3669620K/3971392K available (12828K kernel code, 1624K rwdata, 6696K rodata, 492K init, 2516K bss, 301772K reserved)
61[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
62[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
63[ 0.000000 / 01-01 00:00:00.000][0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
64[ 0.000000 / 01-01 00:00:00.000][0] 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
65[ 0.000000 / 01-01 00:00:00.000][0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
66[ 0.000000 / 01-01 00:00:00.000][0] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
67[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
68[ 0.000000 / 01-01 00:00:00.000][0] memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
69[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xffffffc001394000 - 0xffffffc00140f000 ( 492 KB)
70[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
71[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
72[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
73[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
74[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
75[ 0.000000 / 01-01 00:00:00.000][0] CPU0: found redistributor 0 region 0:0x0000000009c00000
76[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
77[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
78[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
79[ 0.000004 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
80[ 0.000022 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
81[ 0.000857 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
82[ 0.000874 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
83[ 0.001774 / 01-01 00:00:00.000][0] Security Framework initialized
84[ 0.001792 / 01-01 00:00:00.000][0] SELinux: Initializing.
85[ 0.001826 / 01-01 00:00:00.000][0] SELinux: Starting in permissive mode
86[ 0.001862 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
87[ 0.001873 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
88[ 0.002401 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
89[ 0.002420 / 01-01 00:00:00.000][0] Initializing cgroup subsys bfqio
90[ 0.002692 / 01-01 00:00:00.000][0] /cpus/cpu@0: Unknown CPU type
91[ 0.002706 / 01-01 00:00:00.000][0] /cpus/cpu@1: Unknown CPU type
92[ 0.002718 / 01-01 00:00:00.000][0] /cpus/cpu@100: Unknown CPU type
93[ 0.002732 / 01-01 00:00:00.000][0] /cpus/cpu@101: Unknown CPU type
94[ 0.002771 / 01-01 00:00:00.000][0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
95[ 0.002799 / 01-01 00:00:00.000][0] EFI services will not be available.
96[ 0.010654 / 01-01 00:00:00.000][0]
97[ 0.010654 / 01-01 00:00:00.000][0] **********************************************************
98[ 0.010671 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
99[ 0.010678 / 01-01 00:00:00.000][0] ** **
100[ 0.010685 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
101[ 0.010692 / 01-01 00:00:00.000][0] ** **
102[ 0.010699 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
103[ 0.010705 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
104[ 0.010711 / 01-01 00:00:00.000][0] ** **
105[ 0.010718 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
106[ 0.010725 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
107[ 0.010731 / 01-01 00:00:00.000][0] ** **
108[ 0.010737 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
109[ 0.010744 / 01-01 00:00:00.000][0] **********************************************************
110[ 0.011421 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
111[ 0.011443 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
112[ 0.012688 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xc0100000+@0xc00000)
113[ 0.014448 / 01-01 00:00:00.000][0] clock-cpu-8996: configuring clocks for the perf cluster
114[ 0.014628 / 01-01 00:00:00.000][0] cpu_clock_8996_early_init: finished CPU clock configuration
115[ 0.017085 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
116[ 0.017109 / 01-01 00:00:00.000][1] CPU1: found redistributor 1 region 0:0x0000000009c40000
117[ 0.019539 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
118[ 0.019592 / 01-01 00:00:00.000][2] CPU2: found redistributor 100 region 0:0x0000000009c80000
119[ 0.021843 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
120[ 0.021861 / 01-01 00:00:00.019][3] CPU3: found redistributor 101 region 0:0x0000000009cc0000
121[ 0.022000 / 01-01 00:00:00.019][0] Brought up 4 CPUs
122[ 0.022054 / 01-01 00:00:00.019][0] SMP: Total of 4 processors activated.
123[ 0.026752 / 01-01 00:00:00.019][0] DMI not present or invalid.
124[ 0.034458 / 01-01 00:00:00.029][0] pinctrl core: initialized pinctrl subsystem
125[ 0.034861 / 01-01 00:00:00.029][0] regulator-dummy: no parameters
126[ 0.099204 / 01-01 00:00:00.089][0] NET: Registered protocol family 16
127[ 0.130093 / 01-01 00:00:00.129][1] cpuidle: using governor ladder
128[ 0.200069 / 01-01 00:00:00.199][1] cpuidle: using governor menu
129[ 0.210121 / 01-01 00:00:00.209][1] cpuidle: using governor qcom
130[ 0.211269 / 01-01 00:00:00.209][1] vdso: 2 pages (1 code @ ffffffc001431000, 1 data @ ffffffc001430000)
131[ 0.211726 / 01-01 00:00:00.209][1] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
132[ 0.212562 / 01-01 00:00:00.209][1] DMA: preallocated 2048 KiB pool for atomic allocations
133[ 0.212834 / 01-01 00:00:00.209][1] msm_smem_init: unable to create logging context
134[ 0.212875 / 01-01 00:00:00.209][1] msm_smd_init: unable to create SMD logging context
135[ 0.212887 / 01-01 00:00:00.209][1] msm_smd_init: unable to create SMSM logging context
136[ 0.213174 / 01-01 00:00:00.209][0] <CORE> glink_init: unable to create log context
137[ 0.213428 / 01-01 00:00:00.209][1] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
138[ 0.213591 / 01-01 00:00:00.209][0] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
139[ 0.213752 / 01-01 00:00:00.209][1] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
140[ 0.213893 / 01-01 00:00:00.209][0] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
141[ 0.214039 / 01-01 00:00:00.209][1] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
142[ 0.226223 / 01-01 00:00:00.219][1] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
143[ 0.227247 / 01-01 00:00:00.219][1] sps:sps is ready.
144[ 0.228431 / 01-01 00:00:00.219][1] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_default, deferring probe
145[ 0.228934 / 01-01 00:00:00.219][1] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_default, deferring probe
146[ 0.229557 / 01-01 00:00:00.219][1] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
147[ 0.230243 / 01-01 00:00:00.229][1] irq: no irq domain found for /soc/pinctrl@01010000 !
148[ 0.232067 / 01-01 00:00:00.229][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
149[ 0.261903 / 01-01 00:00:00.259][1] smd_channel_probe_now: allocation table not initialized
150[ 0.262231 / 01-01 00:00:00.259][1] smd_channel_probe_now: allocation table not initialized
151[ 0.262540 / 01-01 00:00:00.259][1] smd_channel_probe_now: allocation table not initialized
152[ 0.262844 / 01-01 00:00:00.259][1] smd_channel_probe_now: allocation table not initialized
153[ 0.263118 / 01-01 00:00:00.259][1] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
154[ 0.263424 / 01-01 00:00:00.259][0] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
155[ 0.264273 / 01-01 00:00:00.259][0] msm_rpm_dev_probe: APSS-RPM communication over GLINK
156[ 0.272721 / 01-01 00:00:00.269][1] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
157[ 0.274523 / 01-01 00:00:00.269][1] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
158[ 0.279696 / 01-01 00:00:00.269][1] pmi8994_s2: 400 <--> 1015 mV at 520 mV normal idle
159[ 0.280516 / 01-01 00:00:00.279][1] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
160[ 0.281127 / 01-01 00:00:00.279][1] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
161[ 0.281808 / 01-01 00:00:00.279][1] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
162[ 0.282538 / 01-01 00:00:00.279][1] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
163[ 0.285497 / 01-01 00:00:00.279][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
164[ 0.285623 / 01-01 00:00:00.279][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
165[ 0.285636 / 01-01 00:00:00.279][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
166[ 0.285651 / 01-01 00:00:00.279][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
167[ 0.285665 / 01-01 00:00:00.279][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
168[ 0.290986 / 01-01 00:00:00.289][1] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
169[ 0.292207 / 01-01 00:00:00.289][1] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
170[ 0.293159 / 01-01 00:00:00.289][1] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
171[ 0.294105 / 01-01 00:00:00.289][1] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
172[ 0.294809 / 01-01 00:00:00.289][1] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
173[ 0.294962 / 01-01 00:00:00.289][0] smd_channel_probe_now: allocation table not initialized
174[ 0.295328 / 01-01 00:00:00.289][2] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
175[ 0.296340 / 01-01 00:00:00.289][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
176[ 0.296451 / 01-01 00:00:00.289][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
177[ 0.296619 / 01-01 00:00:00.289][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
178[ 0.296899 / 01-01 00:00:00.289][3] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
179[ 0.298939 / 01-01 00:00:00.289][3] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
180[ 0.299323 / 01-01 00:00:00.289][3] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
181[ 0.299664 / 01-01 00:00:00.289][3] apcc_l3_mem_acc_corner: 0 <--> 0 mV
182[ 0.300011 / 01-01 00:00:00.289][3] gfx_mem_acc_corner: 0 <--> 0 mV
183[ 0.300468 / 01-01 00:00:00.299][3] kryo0-retention: 468 <--> 892 mV at 520 mV
184[ 0.300679 / 01-01 00:00:00.299][3] kryo0: 468 <--> 892 mV at 754 mV
185[ 0.300836 / 01-01 00:00:00.299][3] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
186[ 0.301151 / 01-01 00:00:00.299][3] kryo1-retention: 468 <--> 892 mV at 520 mV
187[ 0.301354 / 01-01 00:00:00.299][3] kryo1: 468 <--> 892 mV at 754 mV
188[ 0.301517 / 01-01 00:00:00.299][3] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
189[ 0.306326 / 01-01 00:00:00.299][3] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
190[ 0.307727 / 01-01 00:00:00.299][3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
191[ 0.327302 / 01-01 00:00:00.319][3] __of_mpm_init(): MPM driver mapping exists
192[ 0.332577 / 01-01 00:00:00.329][3] console [pstore0] enabled
193[ 0.332590 / 01-01 00:00:00.329][3] pstore: Registered ramoops as persistent store backend
194[ 0.332603 / 01-01 00:00:00.329][3] ramoops: attached 0x80000@0xc0000000, ecc: 0/0
195[ 0.334164 / 01-01 00:00:00.329][3] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
196[ 0.334260 / 01-01 00:00:00.329][3] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
197[ 0.334278 / 01-01 00:00:00.329][3] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
198[ 0.335921 / 01-01 00:00:00.329][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
199[ 0.336039 / 01-01 00:00:00.329][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
200[ 0.336057 / 01-01 00:00:00.329][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
201[ 0.336808 / 01-01 00:00:00.329][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
202[ 0.336927 / 01-01 00:00:00.329][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
203[ 0.336945 / 01-01 00:00:00.329][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
204[ 0.337678 / 01-01 00:00:00.329][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
205[ 0.337806 / 01-01 00:00:00.329][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
206[ 0.337823 / 01-01 00:00:00.329][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
207[ 0.338046 / 01-01 00:00:00.329][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
208[ 0.338841 / 01-01 00:00:00.329][1] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
209[ 0.339325 / 01-01 00:00:00.329][1] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
210[ 0.339751 / 01-01 00:00:00.329][1] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
211[ 0.340278 / 01-01 00:00:00.339][1] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
212[ 0.340710 / 01-01 00:00:00.339][1] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
213[ 0.341165 / 01-01 00:00:00.339][1] pm8994_s3: 1300 mV normal idle
214[ 0.341644 / 01-01 00:00:00.339][1] pm8994_s4: 1800 mV normal idle
215[ 0.342096 / 01-01 00:00:00.339][1] pm8994_s5: 2150 mV normal idle
216[ 0.342568 / 01-01 00:00:00.339][1] pm8994_s7: 800 mV normal idle
217[ 0.343024 / 01-01 00:00:00.339][1] pm8994_l1: 1000 mV normal idle
218[ 0.343492 / 01-01 00:00:00.339][1] pm8994_l2: 1250 mV normal idle
219[ 0.344258 / 01-01 00:00:00.339][1] pm8994_l3: 1050 mV normal idle
220[ 0.344747 / 01-01 00:00:00.339][1] pm8994_l4: 1225 mV normal idle
221[ 0.345206 / 01-01 00:00:00.339][1] pm8994_l6: 1200 mV normal idle
222[ 0.345672 / 01-01 00:00:00.339][1] pm8994_l8: 1800 mV normal idle
223[ 0.346117 / 01-01 00:00:00.339][1] pm8994_l9: 1800 mV normal idle
224[ 0.346587 / 01-01 00:00:00.339][1] pm8994_l10: 1800 mV normal idle
225[ 0.347033 / 01-01 00:00:00.339][1] pm8994_l11: 1200 mV normal idle
226[ 0.347498 / 01-01 00:00:00.339][1] pm8994_l12: 1800 mV normal idle
227[ 0.348407 / 01-01 00:00:00.339][1] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
228[ 0.348891 / 01-01 00:00:00.339][1] pm8994_l14: 1800 mV normal idle
229[ 0.349798 / 01-01 00:00:00.339][1] pm8994_l15: 1800 mV normal idle
230[ 0.350346 / 01-01 00:00:00.349][1] pm8994_l16: 2700 mV normal idle
231[ 0.350794 / 01-01 00:00:00.349][1] pm8994_l17: 2800 mV normal idle
232[ 0.351613 / 01-01 00:00:00.349][1] pm8994_l18: 2200 mV normal idle
233[ 0.352038 / 01-01 00:00:00.349][1] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
234[ 0.352501 / 01-01 00:00:00.349][1] pm8994_l19: 3000 mV normal idle
235[ 0.352947 / 01-01 00:00:00.349][1] pm8994_l20: 2950 mV normal idle
236[ 0.353403 / 01-01 00:00:00.349][1] pm8994_l21: 2950 mV normal idle
237[ 0.354236 / 01-01 00:00:00.349][1] pm8994_l22: 3300 mV normal idle
238[ 0.354722 / 01-01 00:00:00.349][1] pm8994_l23: 2800 mV normal idle
239[ 0.355163 / 01-01 00:00:00.349][1] pm8994_l24: 3075 mV normal idle
240[ 0.355631 / 01-01 00:00:00.349][1] pm8994_l25: 1200 mV normal idle
241[ 0.356456 / 01-01 00:00:00.349][1] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
242[ 0.356867 / 01-01 00:00:00.349][1] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
243[ 0.357335 / 01-01 00:00:00.349][1] pm8994_l27: 1000 mV normal idle
244[ 0.357800 / 01-01 00:00:00.349][1] pm8994_l28: 925 mV normal idle
245[ 0.358600 / 01-01 00:00:00.349][1] pm8994_l29: 2800 mV normal idle
246[ 0.359069 / 01-01 00:00:00.349][1] pm8994_l30: 1800 mV normal idle
247[ 0.359531 / 01-01 00:00:00.349][1] pm8994_l32: 1800 mV normal idle
248[ 0.359964 / 01-01 00:00:00.349][1] pm8994_lvs1: no parameters
249[ 0.360444 / 01-01 00:00:00.359][1] pm8994_lvs2: no parameters
250[ 0.360879 / 01-01 00:00:00.359][1] pmi8994_s1: 1025 mV normal idle
251[ 0.361352 / 01-01 00:00:00.359][1] pmi8994_boost_5v: no parameters
252[ 0.361542 / 01-01 00:00:00.359][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
253[ 0.361652 / 01-01 00:00:00.359][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
254[ 0.361995 / 01-01 00:00:00.359][1] pmi8994_boost_pin_ctrl: no parameters
255[ 0.362103 / 01-01 00:00:00.359][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
256[ 0.362203 / 01-01 00:00:00.359][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
257[ 0.362598 / 01-01 00:00:00.359][1] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
258[ 0.362968 / 01-01 00:00:00.359][1] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
259[ 0.363219 / 01-01 00:00:00.359][1] pm8994_s11_avs_limit: 470 <--> 1140 mV
260[ 0.363334 / 01-01 00:00:00.359][1] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
261[ 0.364394 / 01-01 00:00:00.359][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
262[ 0.364432 / 01-01 00:00:00.359][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
263[ 0.364903 / 01-01 00:00:00.359][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
264[ 0.364925 / 01-01 00:00:00.359][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
265[ 0.364943 / 01-01 00:00:00.359][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
266[ 0.364958 / 01-01 00:00:00.359][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
267[ 0.365524 / 01-01 00:00:00.359][1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
268[ 0.366054 / 01-01 00:00:00.359][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
269[ 0.366168 / 01-01 00:00:00.359][1] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
270[ 0.366186 / 01-01 00:00:00.359][1] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
271[ 0.366905 / 01-01 00:00:00.359][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
272[ 0.367018 / 01-01 00:00:00.359][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
273[ 0.367035 / 01-01 00:00:00.359][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
274[ 0.367783 / 01-01 00:00:00.359][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
275[ 0.367903 / 01-01 00:00:00.359][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
276[ 0.367921 / 01-01 00:00:00.359][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
277[ 0.368638 / 01-01 00:00:00.359][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
278[ 0.368765 / 01-01 00:00:00.359][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
279[ 0.368783 / 01-01 00:00:00.359][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
280[ 0.369190 / 01-01 00:00:00.359][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
281[ 0.388682 / 01-01 00:00:00.379][1] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
282[ 0.389759 / 01-01 00:00:00.379][1] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
283[ 0.389788 / 01-01 00:00:00.379][1] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
284[ 0.389805 / 01-01 00:00:00.379][1] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
285[ 0.390295 / 01-01 00:00:00.389][1] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
286[ 0.390320 / 01-01 00:00:00.389][1] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
287[ 0.390335 / 01-01 00:00:00.389][1] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
288[ 0.390770 / 01-01 00:00:00.389][1] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
289[ 0.390800 / 01-01 00:00:00.389][1] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
290[ 0.390814 / 01-01 00:00:00.389][1] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
291[ 0.400505 / 01-01 00:00:00.399][1] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
292[ 0.402415 / 01-01 00:00:00.399][1] pmi8994_boost_5v: no parameters
293[ 0.402588 / 01-01 00:00:00.399][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
294[ 0.402697 / 01-01 00:00:00.399][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
295[ 0.402934 / 01-01 00:00:00.399][1] pmi8994_boost_pin_ctrl: no parameters
296[ 0.403027 / 01-01 00:00:00.399][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
297[ 0.403126 / 01-01 00:00:00.399][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
298[ 0.404110 / 01-01 00:00:00.399][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
299[ 0.404143 / 01-01 00:00:00.399][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
300[ 0.404438 / 01-01 00:00:00.399][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
301[ 0.404457 / 01-01 00:00:00.399][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
302[ 0.404474 / 01-01 00:00:00.399][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
303[ 0.404489 / 01-01 00:00:00.399][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
304[ 0.405183 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
305[ 0.405207 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
306[ 0.405221 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
307[ 0.405235 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
308[ 0.405249 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
309[ 0.405265 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
310[ 0.405544 / 01-01 00:00:00.399][1] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
311[ 0.405771 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
312[ 0.405788 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV
313[ 0.405802 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 805000 uV
314[ 0.405814 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 960000 uV
315[ 0.405906 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 328
316[ 0.405920 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 506, quot_offset[ 7]= 140
317[ 0.405934 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 743, quot_offset[ 7]= 235
318[ 0.405947 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]=1010, quot_offset[ 7]= 265
319[ 0.406080 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
320[ 0.406093 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
321[ 0.406106 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
322[ 0.406119 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
323[ 0.406132 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
324[ 0.406147 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
325[ 0.406286 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 585000 uV
326[ 0.406299 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 685000 uV
327[ 0.406311 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 805000 uV
328[ 0.406323 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 960000 uV
329[ 0.406374 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 328
330[ 0.406387 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 506, quot_offset[ 7]= 140
331[ 0.406400 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 743, quot_offset[ 7]= 235
332[ 0.406412 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]=1010, quot_offset[ 7]= 265
333[ 0.406525 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
334[ 0.406540 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
335[ 0.406553 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
336[ 0.406565 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
337[ 0.406578 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
338[ 0.406592 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
339[ 0.406895 / 01-01 00:00:00.399][1] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
340[ 0.407139 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
341[ 0.407157 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
342[ 0.407170 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
343[ 0.407181 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1020000 uV
344[ 0.407297 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 308
345[ 0.407311 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 465, quot_offset[ 7]= 115
346[ 0.407324 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 624, quot_offset[ 7]= 155
347[ 0.407338 / 01-01 00:00:00.399][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1106, quot_offset[ 7]= 480
348[ 0.407840 / 01-01 00:00:00.399][1] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
349[ 0.408000 / 01-01 00:00:00.399][1] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
350[ 0.408259 / 01-01 00:00:00.399][1] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
351[ 0.411626 / 01-01 00:00:00.409][2] cpr3_regulator_measure_aging: apcc: average quotient delta=17 (count=10)
352[ 0.411664 / 01-01 00:00:00.409][2] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=2812 uV
353[ 0.412234 / 01-01 00:00:00.409][2] apc1_corner: 0 <--> 0 mV at 0 mV
354[ 0.413853 / 01-01 00:00:00.409][3] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
355[ 0.413875 / 01-01 00:00:00.409][3] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
356[ 0.414160 / 01-01 00:00:00.409][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
357[ 0.414176 / 01-01 00:00:00.409][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
358[ 0.414189 / 01-01 00:00:00.409][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
359[ 0.414205 / 01-01 00:00:00.409][3] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 905000 uV
360[ 0.414385 / 01-01 00:00:00.409][3] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
361[ 0.414521 / 01-01 00:00:00.409][3] gfx_corner: 0 <--> 0 mV at 0 mV
362[ 0.415758 / 01-01 00:00:00.409][3] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
363[ 0.415861 / 01-01 00:00:00.409][3] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
364[ 0.415876 / 01-01 00:00:00.409][3] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
365[ 0.417684 / 01-01 00:00:00.409][3] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
366[ 0.417788 / 01-01 00:00:00.409][3] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
367[ 0.417803 / 01-01 00:00:00.409][3] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
368[ 0.419746 / 01-01 00:00:00.409][3] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
369[ 0.419851 / 01-01 00:00:00.409][3] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
370[ 0.419867 / 01-01 00:00:00.409][3] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
371[ 0.420929 / 01-01 00:00:00.419][3] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
372[ 0.421035 / 01-01 00:00:00.419][3] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
373[ 0.421050 / 01-01 00:00:00.419][3] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
374[ 0.422409 / 01-01 00:00:00.419][2] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
375[ 0.424662 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu0
376[ 0.424713 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (1593600000 Hz, 935000 uv) on cpu0
377[ 0.424737 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (307200000 Hz, 605000 uv) on cpu1
378[ 0.424775 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (1593600000 Hz, 935000 uv) on cpu1
379[ 0.424797 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
380[ 0.424856 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu2
381[ 0.424877 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
382[ 0.424930 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (2150400000 Hz, 1005000 uv) on cpu3
383[ 0.425082 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
384[ 0.425129 / 01-01 00:00:00.419][2] clock-cpu-8996: set OPP pair (1593600000 Hz, 935000 uv) on soc:qcom,m4m
385[ 0.425525 / 01-01 00:00:00.419][2] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
386[ 0.425923 / 01-01 00:00:00.419][2] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
387[ 0.425957 / 01-01 00:00:00.419][2] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 905000 uV) on b00000.qcom,kgsl-3d0
388[ 0.426932 / 01-01 00:00:00.419][2] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
389[ 0.427162 / 01-01 00:00:00.419][2] pmi8994_boost_5v: no parameters
390[ 0.427246 / 01-01 00:00:00.419][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
391[ 0.427349 / 01-01 00:00:00.419][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
392[ 0.427559 / 01-01 00:00:00.419][2] pmi8994_boost_pin_ctrl: no parameters
393[ 0.427619 / 01-01 00:00:00.419][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
394[ 0.427711 / 01-01 00:00:00.419][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
395[ 0.428624 / 01-01 00:00:00.419][2] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
396[ 0.428652 / 01-01 00:00:00.419][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
397[ 0.428940 / 01-01 00:00:00.419][2] msm_thermal:update_cpu_freq [CPU0] : max freq = 1190400
398[ 0.428955 / 01-01 00:00:00.419][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
399[ 0.428971 / 01-01 00:00:00.419][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 0
400[ 0.428983 / 01-01 00:00:00.419][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
401[ 0.428998 / 01-01 00:00:00.419][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 1190400
402[ 0.429011 / 01-01 00:00:00.419][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
403[ 0.430223 / 01-01 00:00:00.429][2] msm_thermal:update_cpu_freq [CPU0] : max freq = 1593600
404[ 0.430241 / 01-01 00:00:00.429][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
405[ 0.430257 / 01-01 00:00:00.429][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
406[ 0.430269 / 01-01 00:00:00.429][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
407[ 0.430284 / 01-01 00:00:00.429][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
408[ 0.430296 / 01-01 00:00:00.429][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
409[ 0.430317 / 01-01 00:00:00.429][1] pmi8994_boost_5v: no parameters
410[ 0.430462 / 01-01 00:00:00.429][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
411[ 0.430569 / 01-01 00:00:00.429][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
412[ 0.430818 / 01-01 00:00:00.429][1] pmi8994_boost_pin_ctrl: no parameters
413[ 0.430918 / 01-01 00:00:00.429][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
414[ 0.431017 / 01-01 00:00:00.429][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
415[ 0.485077 / 01-01 00:00:00.479][0] KPI: Bootloader start count = 42058
416[ 0.485102 / 01-01 00:00:00.479][0] KPI: Bootloader end count = 245600
417[ 0.485115 / 01-01 00:00:00.479][0] KPI: Bootloader display count = 59603
418[ 0.485128 / 01-01 00:00:00.479][0] KPI: Bootloader load kernel count = 4533
419[ 0.485143 / 01-01 00:00:00.479][0] KPI: Kernel MPM timestamp = 271641
420[ 0.485154 / 01-01 00:00:00.479][0] KPI: Kernel MPM Clock frequency = 32768
421[ 0.485182 / 01-01 00:00:00.479][0] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
422[ 0.485182 / 01-01 00:00:00.479][0] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=3089905918 num_pmics=2
423[ 0.485238 / 01-01 00:00:00.479][0] [LGE_POWER] lge power!!!
424[ 0.485534 / 01-01 00:00:00.479][0] gdsc_mmagic_bimc: no parameters
425[ 0.486511 / 01-01 00:00:00.479][0] usb_otg_vreg: no parameters
426[ 0.486607 / 01-01 00:00:00.479][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
427[ 0.486716 / 01-01 00:00:00.479][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
428[ 0.486923 / 01-01 00:00:00.479][0] wlan_en_vreg: no parameters
429[ 0.487834 / 01-01 00:00:00.479][0] vgaarb: loaded
430[ 0.489873 / 01-01 00:00:00.479][0] SCSI subsystem initialized
431[ 0.491429 / 01-01 00:00:00.489][0] usbcore: registered new interface driver usbfs
432[ 0.491500 / 01-01 00:00:00.489][0] usbcore: registered new interface driver hub
433[ 0.491647 / 01-01 00:00:00.489][0] usbcore: registered new device driver usb
434[ 0.492210 / 01-01 00:00:00.489][0] soc:usb_nop_phy supply vcc not found, using dummy regulator
435[ 0.493177 / 01-01 00:00:00.489][0] media: Linux media interface: v0.10
436[ 0.493237 / 01-01 00:00:00.489][0] Linux video capture interface: v2.00
437[ 0.560465 / 01-01 00:00:00.559][0] cpufreq: driver msm up and running
438[ 0.561243 / 01-01 00:00:00.559][0] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
439[ 0.561840 / 01-01 00:00:00.559][0] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
440[ 0.562409 / 01-01 00:00:00.559][0] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
441[ 0.563019 / 01-01 00:00:00.559][0] ION heap system created
442[ 0.563183 / 01-01 00:00:00.559][0] ION heap adsp created at 0x00000000ff800000 with size 400000
443[ 0.563198 / 01-01 00:00:00.559][0] ION heap qsecom created at 0x00000000fe400000 with size 1400000
444[ 0.563210 / 01-01 00:00:00.559][0] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
445[ 0.563222 / 01-01 00:00:00.559][0] ION heap secure_heap created
446[ 0.564269 / 01-01 00:00:00.559][0] msm_bus_fabric_init_driver
447[ 0.568897 / 01-01 00:00:00.559][0] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
448[ 0.568921 / 01-01 00:00:00.559][0] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
449[ 0.572261 / 01-01 00:00:00.569][2] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
450[ 0.572733 / 01-01 00:00:00.569][2] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
451[ 0.578350 / 01-01 00:00:00.569][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
452[ 0.578364 / 01-01 00:00:00.569][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
453[ 0.578376 / 01-01 00:00:00.569][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
454[ 0.578491 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
455[ 0.578516 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
456[ 0.578538 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
457[ 0.578560 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
458[ 0.578582 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
459[ 0.578603 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
460[ 0.578624 / 01-01 00:00:00.569][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
461[ 0.580351 / 01-01 00:00:00.579][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
462[ 0.580375 / 01-01 00:00:00.579][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
463[ 0.580547 / 01-01 00:00:00.579][2] input: qpnp_pon as /devices/virtual/input/input0
464[ 0.580970 / 01-01 00:00:00.579][2] pon_spare_reg: no parameters
465[ 0.581032 / 01-01 00:00:00.579][2] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
466[ 0.581089 / 01-01 00:00:00.579][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
467[ 0.581105 / 01-01 00:00:00.579][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Unknown power-off reason
468[ 0.581300 / 01-01 00:00:00.579][2] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
469[ 0.581380 / 01-01 00:00:00.579][2] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
470[ 0.582543 / 01-01 00:00:00.579][2] ipa ipa2_uc_state_check:296 uC interface not initialized
471[ 0.582556 / 01-01 00:00:00.579][2] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
472[ 0.582562 / 01-01 00:00:00.579][2] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
473[ 0.584224 / 01-01 00:00:00.579][3] sps:BAM 0x0000000000684000 is registered.
474[ 0.585078 / 01-01 00:00:00.579][3] ipa ipa2_uc_state_check:296 uC interface not initialized
475[ 0.585276 / 01-01 00:00:00.579][3] sps:BAM 0x0000000000684000 (va:0xffffff8000ec0000) enabled: ver:0x27, number of pipes:20
476[ 0.586722 / 01-01 00:00:00.579][3] ipa ipa2_uc_state_check:296 uC interface not initialized
477[ 0.592780 / 01-01 00:00:00.589][3] ipa ipa2_uc_state_check:296 uC interface not initialized
478[ 0.594510 / 01-01 00:00:00.589][3] IPA driver initialization was successful.
479[ 0.595936 / 01-01 00:00:00.589][3] gdsc_mmagic_video: no parameters
480[ 0.596177 / 01-01 00:00:00.589][3] gdsc_mmagic_mdss: no parameters
481[ 0.596344 / 01-01 00:00:00.589][3] gdsc_mmagic_camss: no parameters
482[ 0.596606 / 01-01 00:00:00.589][3] gdsc_venus: no parameters
483[ 0.596627 / 01-01 00:00:00.589][3] gdsc_venus: supplied by gdsc_mmagic_video
484[ 0.596856 / 01-01 00:00:00.589][3] gdsc_venus_core0: fast normal
485[ 0.597014 / 01-01 00:00:00.589][3] gdsc_venus_core1: fast normal
486[ 0.597200 / 01-01 00:00:00.589][3] gdsc_camss_top: no parameters
487[ 0.597219 / 01-01 00:00:00.589][3] gdsc_camss_top: supplied by gdsc_mmagic_camss
488[ 0.597414 / 01-01 00:00:00.589][3] gdsc_vfe0: no parameters
489[ 0.597433 / 01-01 00:00:00.589][3] gdsc_vfe0: supplied by gdsc_camss_top
490[ 0.597614 / 01-01 00:00:00.589][3] gdsc_vfe1: no parameters
491[ 0.597635 / 01-01 00:00:00.589][3] gdsc_vfe1: supplied by gdsc_camss_top
492[ 0.597818 / 01-01 00:00:00.589][3] gdsc_mdss: no parameters
493[ 0.597839 / 01-01 00:00:00.589][3] gdsc_mdss: supplied by gdsc_mmagic_mdss
494[ 0.598152 / 01-01 00:00:00.589][3] gdsc_jpeg: no parameters
495[ 0.598171 / 01-01 00:00:00.589][3] gdsc_jpeg: supplied by gdsc_camss_top
496[ 0.598380 / 01-01 00:00:00.589][3] gdsc_cpp: no parameters
497[ 0.598401 / 01-01 00:00:00.589][3] gdsc_cpp: supplied by gdsc_camss_top
498[ 0.598565 / 01-01 00:00:00.589][3] gdsc_pcie_0: no parameters
499[ 0.598738 / 01-01 00:00:00.589][3] gdsc_pcie_1: no parameters
500[ 0.598880 / 01-01 00:00:00.589][3] gdsc_pcie_2: no parameters
501[ 0.599054 / 01-01 00:00:00.589][3] gdsc_usb30: no parameters
502[ 0.599201 / 01-01 00:00:00.589][3] gdsc_ufs: no parameters
503[ 0.599413 / 01-01 00:00:00.589][3] gdsc_fd: no parameters
504[ 0.599433 / 01-01 00:00:00.589][3] gdsc_fd: supplied by gdsc_camss_top
505[ 0.599599 / 01-01 00:00:00.589][3] gdsc_gpu: no parameters
506[ 0.599817 / 01-01 00:00:00.589][3] gdsc_gpu_gx: no parameters
507[ 0.600348 / 01-01 00:00:00.599][3] gdsc_gpu_gx: supplied by gfx_corner
508[ 0.600548 / 01-01 00:00:00.599][3] gdsc_hlos1_vote_aggre0_noc: no parameters
509[ 0.600720 / 01-01 00:00:00.599][3] gdsc_hlos1_vote_lpass_adsp: no parameters
510[ 0.600876 / 01-01 00:00:00.599][3] gdsc_hlos1_vote_lpass_core: no parameters
511[ 0.601047 / 01-01 00:00:00.599][3] gdsc_aggre0_noc: no parameters
512[ 0.603515 / 01-01 00:00:00.599][3] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
513[ 0.603540 / 01-01 00:00:00.599][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
514[ 0.604801 / 01-01 00:00:00.599][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
515[ 0.604845 / 01-01 00:00:00.599][3] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
516[ 0.604854 / 01-01 00:00:00.599][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
517[ 0.605934 / 01-01 00:00:00.599][3] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
518[ 0.606528 / 01-01 00:00:00.599][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
519[ 0.606571 / 01-01 00:00:00.599][3] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
520[ 0.606581 / 01-01 00:00:00.599][3] mdss_pll_probe: Unable to get the cell-index rc=-22
521[ 0.749574 / 01-01 00:00:00.739][3] Advanced Linux Sound Architecture Driver Initialized.
522[ 0.750400 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bd20
523[ 0.750488 / 01-01 00:00:00.749][3] NET: Registered protocol family 31
524[ 0.750502 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bd20
525[ 0.750516 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bd00Bluetooth: ffffffc0f889bcd0
526[ 0.750559 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bce0<6>[ 0.751100 / 01-01 00:00:00.749][3] cfg80211: Calling CRDA to update world regulatory domain
527[ 0.751136 / 01-01 00:00:00.749][3] cfg80211: World regulatory domain updated:
528[ 0.751148 / 01-01 00:00:00.749][3] cfg80211: DFS Master region: unset
529[ 0.751156 / 01-01 00:00:00.749][3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
530[ 0.751173 / 01-01 00:00:00.749][3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
531[ 0.751183 / 01-01 00:00:00.749][3] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
532[ 0.751192 / 01-01 00:00:00.749][3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
533[ 0.751203 / 01-01 00:00:00.749][3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
534[ 0.751213 / 01-01 00:00:00.749][3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
535[ 0.751221 / 01-01 00:00:00.749][3] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
536[ 0.751229 / 01-01 00:00:00.749][3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
537[ 0.751237 / 01-01 00:00:00.749][3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
538[ 0.751242 / 01-01 00:00:00.749][2] pcie:pcie_init.
539[ 0.751247 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie0-short
540[ 0.751248 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie0-long
541[ 0.751252 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie0-dump
542[ 0.751254 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie1-short
543[ 0.751258 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie1-long
544[ 0.751261 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie1-dump
545[ 0.751264 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie2-short
546[ 0.751265 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie2-long
547[ 0.751266 / 01-01 00:00:00.749][2] pcie_init: unable to create IPC log context for pcie2-dump
548[ 0.753296 / 01-01 00:00:00.749][2] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
549[ 0.756220 / 01-01 00:00:00.749][2] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
550[ 0.759057 / 01-01 00:00:00.749][0] pmi8994_boost_5v: no parameters
551[ 0.759346 / 01-01 00:00:00.749][0] pmi8994_boost_5v: supplied by pon_spare_reg
552[ 0.759792 / 01-01 00:00:00.749][0] pmi8994_boost_pin_ctrl: no parameters
553[ 0.759939 / 01-01 00:00:00.749][0] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
554[ 0.760479 / 01-01 00:00:00.759][0] register_qpnp_ibb_regulator: [Display] IBB soft start R is set for PMI8996
555[ 0.760741 / 01-01 00:00:00.759][0] ibb_reg: 4600 <--> 6000 mV at 5500 mV
556[ 0.761094 / 01-01 00:00:00.759][0] lab_reg: 4600 <--> 6000 mV at 5500 mV
557[ 0.761748 / 01-01 00:00:00.759][0] usb_otg_vreg: no parameters
558[ 0.761893 / 01-01 00:00:00.759][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
559[ 0.762012 / 01-01 00:00:00.759][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
560[ 0.762827 / 01-01 00:00:00.759][2] Switched to clocksource arch_sys_counter
561[ 0.797802 / 01-01 00:00:00.789][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe Start~!!
562[ 0.797839 / 01-01 00:00:00.789][2] [LGE-BATT-ID] lge_battery_id_probe : Battery info : 187
563[ 0.798096 / 01-01 00:00:00.789][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe done~!!
564[ 0.798158 / 01-01 00:00:00.789][2] lge_power_changed_work
565[ 0.799676 / 01-01 00:00:00.789][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe Start~!!
566[ 0.799826 / 01-01 00:00:00.789][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe done~!!
567[ 0.799852 / 01-01 00:00:00.789][2] lge_power_changed_work
568[ 0.800741 / 01-01 00:00:00.799][2] bcl_peripheral:bcl_perph_init BCL Initialized
569[ 0.805121 / 01-01 00:00:00.799][3] NET: Registered protocol family 2
570[ 0.805884 / 01-01 00:00:00.799][3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
571[ 0.805992 / 01-01 00:00:00.799][3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
572[ 0.806320 / 01-01 00:00:00.799][3] TCP: Hash tables configured (established 32768 bind 32768)
573[ 0.806463 / 01-01 00:00:00.799][3] TCP: reno registered
574[ 0.806481 / 01-01 00:00:00.799][3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
575[ 0.806507 / 01-01 00:00:00.799][3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
576[ 0.806851 / 01-01 00:00:00.799][3] NET: Registered protocol family 1
577[ 0.806932 / 01-01 00:00:00.799][3] PCI: CLS 0 bytes, default 128
578[ 0.807789 / 01-01 00:00:00.799][0] usb_otg_vreg: no parameters
579[ 0.807923 / 01-01 00:00:00.799][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
580[ 0.808025 / 01-01 00:00:00.799][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
581[ 0.808565 / 01-01 00:00:00.799][3] Trying to unpack rootfs image as initramfs...
582[ 0.854363 / 01-01 00:00:00.849][3] Freeing initrd memory: 2372K (ffffffc002200000 - ffffffc002451000)
583[ 0.856427 / 01-01 00:00:00.849][3] kryo perfevents: CPU pmu for kryo-pmuv3 detected
584[ 0.862450 / 01-01 00:00:00.859][3] futex hash table entries: 1024 (order: 5, 131072 bytes)
585[ 0.862588 / 01-01 00:00:00.859][3] Initialise system trusted keyring
586[ 0.862702 / 01-01 00:00:00.859][3] audit: initializing netlink subsys (disabled)
587[ 0.862814 / 01-01 00:00:00.859][3] audit: type=2000 audit(0.859:1): initialized
588[ 0.867534 / 01-01 00:00:00.859][3] vmscan: error setting kswapd cpu affinity mask
589[ 0.871701 / 01-01 00:00:00.869][3] Registering sdcardfs 2.1.3-2
590[ 0.871785 / 01-01 00:00:00.869][3] fuse init (API version 7.23)
591[ 0.871948 / 01-01 00:00:00.869][3] SELinux: Registering netfilter hooks
592[ 0.874208 / 01-01 00:00:00.869][3] Key type asymmetric registered
593[ 0.874230 / 01-01 00:00:00.869][3] Asymmetric key parser 'x509' registered
594[ 0.874358 / 01-01 00:00:00.869][3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
595[ 0.874375 / 01-01 00:00:00.869][3] io scheduler noop registered
596[ 0.874385 / 01-01 00:00:00.869][3] io scheduler deadline registered
597[ 0.874483 / 01-01 00:00:00.869][3] io scheduler cfq registered
598[ 0.874545 / 01-01 00:00:00.869][3] io scheduler bfq registered (default)
599[ 0.874555 / 01-01 00:00:00.879][3] BFQ I/O-scheduler: v7r8
600[ 0.885913 / 01-01 00:00:00.879][3] [LCD][LM3697] lm3697_probe: i2c probe start
601[ 0.886246 / 01-01 00:00:00.879][3] [LM3697] lm3697_parse_dt gpio: 1015, max_current: 19, min: 1, default: 46, max: 255, output_config: 4, brightness_config: 0, sink_feedback: 0, boost_ctrl: 4, pwm : 0
602[ 0.886256 / 01-01 00:00:00.879][3] [LCD][LM3697] lm3697_probe: gpio = 1015
603[ 0.887226 / 01-01 00:00:00.879][3] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
604[ 0.888547 / 01-01 00:00:00.879][3] No change in context(0==0), skip
605[ 0.889844 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
606[ 0.889853 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
607[ 0.889860 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
608[ 0.889867 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
609[ 0.889889 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
610[ 0.889896 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
611[ 0.889902 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
612[ 0.889908 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
613[ 0.889924 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
614[ 0.889931 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
615[ 0.889948 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
616[ 0.889955 / 01-01 00:00:00.879][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
617[ 0.889965 / 01-01 00:00:00.879][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
618[ 0.890098 / 01-01 00:00:00.889][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
619[ 0.890480 / 01-01 00:00:00.889][3] xlog_status: enable:1, panic:0, dump:2
620[ 0.890703 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
621[ 0.890719 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
622[ 0.891358 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
623[ 0.891368 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
624[ 0.891496 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
625[ 0.891507 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
626[ 0.891630 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
627[ 0.891640 / 01-01 00:00:00.889][3] OF: no ranges; cannot translate
628[ 0.891857 / 01-01 00:00:00.889][3] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
629[ 0.897114 / 01-01 00:00:00.889][3] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
630[ 0.897315 / 01-01 00:00:00.889][3] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
631[ 0.897458 / 01-01 00:00:00.889][3] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
632[ 0.897594 / 01-01 00:00:00.889][3] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
633[ 0.900628 / 01-01 00:00:00.899][3] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
634[ 0.901168 / 01-01 00:00:00.899][3] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_sw49407_dsc_qhd_cmd
635[ 0.901185 / 01-01 00:00:00.899][3] mdss_dsi_panel_init: Panel Name = SW49407 cmd mode dsc dsi panel
636[ 0.901195 / 01-01 00:00:00.899][3] mdss_dsi_panel_init: panel_type is LGD_SW49407_CMD_DSC_PANEL
637[ 0.901202 / 01-01 00:00:00.899][3] panel_type is 4
638[ 0.901246 / 01-01 00:00:00.899][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap
639[ 0.901259 / 01-01 00:00:00.899][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-hl
640[ 0.901269 / 01-01 00:00:00.899][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex
641[ 0.901278 / 01-01 00:00:00.899][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim
642[ 0.901287 / 01-01 00:00:00.899][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-hl
643[ 0.901296 / 01-01 00:00:00.899][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim-hl
644[ 0.901364 / 01-01 00:00:00.899][3] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sw49407_dsc_qhd_cmd" (ffffffc0f889b210)
645[ 0.901382 / 01-01 00:00:00.899][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-vcom-command
646[ 0.901409 / 01-01 00:00:00.899][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-20-command
647[ 0.901419 / 01-01 00:00:00.899][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-30-command
648[ 0.901428 / 01-01 00:00:00.899][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
649[ 0.901436 / 01-01 00:00:00.899][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
650[ 0.901448 / 01-01 00:00:00.899][3] mdss_dsi_parse_topology_config: cfg_node name config1 lm_split:720x720 pp_split:no
651[ 0.901540 / 01-01 00:00:00.899][3] mdss_dsi_parse_panel_features: partial_update_enabled=1
652[ 0.901553 / 01-01 00:00:00.899][3] mdss_dsi_parse_panel_features: ulps feature enabled
653[ 0.901562 / 01-01 00:00:00.899][3] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
654[ 0.901571 / 01-01 00:00:00.899][3] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
655[ 0.901634 / 01-01 00:00:00.899][3] [AOD] init start
656[ 0.901747 / 01-01 00:00:00.899][3] mdss_panel_parse_blex_settings: Configured BL_OTHERS bkltex ctrl
657[ 0.902213 / 01-01 00:00:00.899][3] no supply entry present: lge,extra-supply-entries
658[ 0.902235 / 01-01 00:00:00.899][3] mdss_dsi_parse_ctrl_params:3974 Unable to read qcom,display-id, data=0000000000000000,len=20
659[ 0.902275 / 01-01 00:00:00.899][3] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
660[ 0.902317 / 01-01 00:00:00.899][3] lge_mdss_dsi_parse_gpio_params: num_gpios=2
661[ 0.902390 / 01-01 00:00:00.899][3] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
662[ 0.902417 / 01-01 00:00:00.899][3] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
663[ 0.902425 / 01-01 00:00:00.899][3] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800198a000 ctrl_size=400 phy_base=ffffff800198c400 phy_size=588
664[ 0.902581 / 01-01 00:00:00.899][3] dsi_panel_device_register: Continuous splash enabled
665[ 0.903216 / 01-01 00:00:00.899][3] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
666[ 0.903614 / 01-01 00:00:00.899][3] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
667[ 0.904251 / 01-01 00:00:00.899][3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
668[ 0.904443 / 01-01 00:00:00.899][3] mdss_dsi_ctrl 996000.qcom,mdss_dsi_ctrl1: mdss_dsi_ctrl_probe: Cell-index not specified, rc=-22
669[ 0.904463 / 01-01 00:00:00.899][3] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
670[ 0.905912 / 01-01 00:00:00.899][3] mdss_dsi_status_init: DSI status check interval:5000
671[ 0.906944 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_data: id=0
672[ 0.906954 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
673[ 0.906964 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: no gpio
674[ 0.906971 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
675[ 0.906978 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: no gpio
676[ 0.906985 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
677[ 0.906990 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: no gpio
678[ 0.906996 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
679[ 0.907002 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_gpio_data: no gpio
680[ 0.907009 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
681[ 0.907023 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, enable=0 disable=0
682[ 0.907030 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
683[ 0.907036 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: no vreg
684[ 0.907042 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
685[ 0.907048 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: no vreg
686[ 0.907054 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
687[ 0.907060 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_vreg_data: no vreg
688[ 0.907066 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
689[ 0.907073 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
690[ 0.907078 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_clk_data: no clk
691[ 0.907084 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
692[ 0.907089 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
693[ 0.907095 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_clk_data: no clk
694[ 0.907105 / 01-01 00:00:00.899][3] hdmi_tx_get_dt_data:4587 Unable to read qcom,display-id, data=0000000000000000,len=0
695[ 0.907677 / 01-01 00:00:00.899][3] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001990000, len=0x50c
696[ 0.907690 / 01-01 00:00:00.899][3] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001998000, len=0x6158
697[ 0.907782 / 01-01 00:00:00.899][3] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001992000, len=0xfff
698[ 0.908186 / 01-01 00:00:00.899][3] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
699[ 0.908909 / 01-01 00:00:00.899][3] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
700[ 0.909347 / 01-01 00:00:00.899][3] hdmi_tx_probe: Add child devices.
701[ 0.911275 / 01-01 00:00:00.909][3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
702[ 0.913245 / 01-01 00:00:00.909][3] [MDSS] lge_cd_lpc is not yet ready
703[ 0.913283 / 01-01 00:00:00.909][3] [MDSS] cable 8
704[ 0.913292 / 01-01 00:00:00.909][3] lge,blmap: br_lvl(127) -> bl_lvl(561)
705[ 0.913302 / 01-01 00:00:00.909][3] mdss_fb_probe: fb0: split_mode:1 left:720 right:720
706[ 0.913830 / 01-01 00:00:00.909][3] mdss_fb_register: FrameBuffer[0] 1440x2720 registered successfully!
707[ 0.914397 / 01-01 00:00:00.909][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
708[ 0.914405 / 01-01 00:00:00.909][3] mdss_mdp_splash_parse_dt: no rsvd mem found in DT for splash screen
709[ 0.914411 / 01-01 00:00:00.909][3] mdss_mdp_splash_init: splash memory reserve failed
710[ 0.914426 / 01-01 00:00:00.909][3] vts_register_value_sensor: Register value sensor [led] : weight = 0
711[ 0.914433 / 01-01 00:00:00.909][3] vts_register_value_sensor: Register value sensor [led_sensor] : weight = 1000
712[ 0.914439 / 01-01 00:00:00.909][3] mdss_fb_probe: "led" virtual value sensor is registered.
713[ 0.914475 / 01-01 00:00:00.909][3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
714[ 0.914540 / 01-01 00:00:00.909][3] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
715[ 0.914581 / 01-01 00:00:00.909][3] hdmi_tx_event_handler: event = MDSS_EVENT_FB_REGISTERED suspend=0, hpd_feature=0
716[ 0.914614 / 01-01 00:00:00.909][3] hdmi_tx_sysfs_create: sysfs group ffffffc076235810
717[ 0.914622 / 01-01 00:00:00.909][3] hdmi_tx_init_panel: panel initialized
718[ 0.914661 / 01-01 00:00:00.909][3] hdmi_tx_init_hdcp: HDCP 1.4 initialized
719[ 0.914888 / 01-01 00:00:00.909][3] hdmi_tx_init_hdcp: HDCP 2.2 initialized
720[ 0.914928 / 01-01 00:00:00.909][3] hdmi_tx_init_audio: audio initialized
721[ 0.919636 / 01-01 00:00:00.909][3] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
722[ 0.919798 / 01-01 00:00:00.909][3] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
723[ 0.919897 / 01-01 00:00:00.909][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
724[ 0.923718 / 01-01 00:00:00.919][3] glink_loopback_server_init: unable to create log context
725[ 0.923882 / 01-01 00:00:00.919][3] msm_smp2p_init: unable to create log context
726[ 0.926524 / 01-01 00:00:00.919][3] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
727[ 0.926541 / 01-01 00:00:00.919][3] logging for Indications: Unable to create QMI IPC qmi_log_init<3>[ 0.930739 / 01-01 00:00:00.929][3] apr_init: Unable to create ipc log context
728[ 0.938752 / 01-01 00:00:00.929][3] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
729[ 0.939742 / 01-01 00:00:00.929][3] msm_rpm_log_probe: OK
730[ 0.943471 / 01-01 00:00:00.939][3] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
731[ 0.944287 / 01-01 00:00:00.939][3] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
732[ 0.947072 / 01-01 00:00:00.939][3] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
733[ 0.950659 / 01-01 00:00:00.949][3] bootlog_probe: start 0x4fb0
734[ 0.950683 / 01-01 00:00:00.949][3] bootlog_probe: size 0x1fff4
735[ 0.950689 / 01-01 00:00:00.949][3] -------------------------------------------------
736[ 0.950695 / 01-01 00:00:00.949][3] below logs are got from bootloader
737[ 0.950701 / 01-01 00:00:00.949][3] -------------------------------------------------
738[ 0.950707 / 01-01 00:00:00.949][3]
739[ 0.950765 / 01-01 00:00:00.949][3] B - 418704 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
740[ 0.950803 / 01-01 00:00:00.949][3] B - 418734 - ch 2, cs 1, mr8 0x08080808
741[ 0.950861 / 01-01 00:00:00.949][3] B - 418734 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
742[ 0.950932 / 01-01 00:00:00.949][3] B - 418978 - ddr_info: SKH ver=21914 ch=0x3 cs=0x3 rev1=0x4 rev2=0x0 mr8=0x8 hwrev=12
743[ 0.950966 / 01-01 00:00:00.949][3] B - 418978 - ddr_trained[37c,0x3]
744[ 0.951005 / 01-01 00:00:00.949][3] B - 418978 - ddr_initialize_device, Delta
745[ 0.951054 / 01-01 00:00:00.949][3] B - 418978 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
746[ 0.951091 / 01-01 00:00:00.949][3] B - 419070 - [DDR] remap_size: 4096MB
747[ 0.951140 / 01-01 00:00:00.949][3] B - 419070 - [DDR] remap_info CS0: 0x80000000, CS1: 0x0
748[ 0.951174 / 01-01 00:00:00.949][3] B - 419192 - Basic DDR tests done
749[ 0.951209 / 01-01 00:00:00.949][3] B - 475129 - boot_pre_longkey_check
750[ 0.951244 / 01-01 00:00:00.949][3] B - 475129 - powerkey release state
751[ 0.951275 / 01-01 00:00:00.949][3] B - 483059 - Image Load, Start
752[ 0.951311 / 01-01 00:00:00.949][3] B - 483150 - bootLUN:1, currentLUN:1
753[ 0.951350 / 01-01 00:00:00.949][3] B - 483150 - xbl is matched with bootLUN
754[ 0.951400 / 01-01 00:00:00.949][3] D - 945 - LGE SBL Image Loaded, Delta - (51579 Bytes)
755[ 0.951431 / 01-01 00:00:00.949][3] B - 484004 - clock_init, Start
756[ 0.951462 / 01-01 00:00:00.949][3] B - 484370 - Image Load, Start
757[ 0.951518 / 01-01 00:00:00.949][3] D - 3874 - QSEE Dev Config Image Loaded, Delta - (46200 Bytes)
758[ 0.951549 / 01-01 00:00:00.949][3] B - 488610 - Image Load, Start
759[ 0.951597 / 01-01 00:00:00.949][3] D - 2531 - APDP Image Loaded, Delta - (7768 Bytes)
760[ 0.951628 / 01-01 00:00:00.949][3] B - 505903 - Image Load, Start
761[ 0.951678 / 01-01 00:00:00.949][3] D - 55419 - QSEE Image Loaded, Delta - (1640904 Bytes)
762[ 0.951709 / 01-01 00:00:00.949][3] B - 561352 - Image Load, Start
763[ 0.951746 / 01-01 00:00:00.949][3] B - 561871 - QFPROM flag != QFPROMblown
764[ 0.951793 / 01-01 00:00:00.949][3] D - 549 - SEC Image Loaded, Delta - (4116 Bytes)
765[ 0.951833 / 01-01 00:00:00.949][3] B - 562450 - sbl1_efs_handle_cookies, Start
766[ 0.951875 / 01-01 00:00:00.949][3] D - 91 - sbl1_efs_handle_cookies, Delta
767[ 0.951905 / 01-01 00:00:00.949][3] B - 562572 - Image Load, Start
768[ 0.951954 / 01-01 00:00:00.949][3] D - 12017 - QHEE Image Loaded, Delta - (254192 Bytes)
769[ 0.951986 / 01-01 00:00:00.949][3] B - 574589 - Image Load, Start
770[ 0.952034 / 01-01 00:00:00.949][3] D - 11102 - RPM Image Loaded, Delta - (223932 Bytes)
771[ 0.952065 / 01-01 00:00:00.949][3] B - 585722 - Image Load, Start
772[ 0.952110 / 01-01 00:00:00.949][3] D - 31 - STI Image Loaded, Delta - (0 Bytes)
773[ 0.952139 / 01-01 00:00:00.949][3] B - 586515 - cable type is 8
774[ 0.952192 / 01-01 00:00:00.949][3] B - 761524 - pm_app_smbchg: TA/USB attached, battery present
775[ 0.952238 / 01-01 00:00:00.949][3] B - 761585 - Charger source: SDP before APSD rerun
776[ 0.952286 / 01-01 00:00:00.949][3] B - 762408 - [ADC][mvol=1790][hw_rev_table[12]=[1700]
777[ 0.952331 / 01-01 00:00:00.949][3] B - 770430 - [Display] SW49407_QHD_DSC_CMD_PANEL
778[ 0.952365 / 01-01 00:00:00.949][3] B - 770430 - panel_type = CMD_PANEL
779[ 0.952398 / 01-01 00:00:00.949][3] B - 777750 - Panel power on done
780[ 0.952432 / 01-01 00:00:00.949][3] B - 777780 - soc_version:0x00030001
781[ 0.952465 / 01-01 00:00:00.949][3] B - 822829 - Panel pre init done
782[ 0.952528 / 01-01 00:00:00.949][3] [0] logbuf_relocate_sbl_log: log_start=0x85e11040, log_size=0x815, end_time=0
783[ 0.952546 / 01-01 00:00:00.949][3] [0] welcome to lk
784[ 0.952553 / 01-01 00:00:00.949][3]
785[ 0.952573 / 01-01 00:00:00.949][3] [10] platform_init()
786[ 0.952592 / 01-01 00:00:00.949][3] [10] target_init()
787[ 0.952612 / 01-01 00:00:00.949][3] [10] RPM GLink Init
788[ 0.952644 / 01-01 00:00:00.949][3] [10] Opening RPM Glink Port success
789[ 0.952676 / 01-01 00:00:00.949][3] [10] Opening SSR Glink Port success
790[ 0.952721 / 01-01 00:00:00.949][3] [10] Glink Connection between APPS and RPM established
791[ 0.952767 / 01-01 00:00:00.949][3] [10] Glink Connection between APPS and RPM established
792[ 0.952824 / 01-01 00:00:00.949][3] [20] bootmode_set_board_revision: board revision value is 12 from smem
793[ 0.952853 / 01-01 00:00:00.949][3] [20] HW Rev(12), vol_up gpio(2)
794[ 0.952875 / 01-01 00:00:00.949][3] [30] UFS init success
795[ 0.952912 / 01-01 00:00:00.949][3] [70] SW3800_Authentication [vendor code: 1]
796[ 0.952945 / 01-01 00:00:00.949][3] [110] set_dload_mode: download_mode:0
797[ 0.952982 / 01-01 00:00:00.949][3] [120] [KSwitch] ftm kill switch item value=
798[ 0.953044 / 01-01 00:00:00.949][3] [120] [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
799[ 0.953066 / 01-01 00:00:00.949][3] [120] batt_info = 187
800[ 0.953121 / 01-01 00:00:00.949][3] [120] bootmode_set_cable: usb cable type/port type is 8/3 from smem
801[ 0.953139 / 01-01 00:00:00.949][3] [120] get_qem = 0
802[ 0.953180 / 01-01 00:00:00.949][3] [120] [emmc_one_binary] target partition updates
803[ 0.953220 / 01-01 00:00:00.949][3] [120] [emmc_one_binary] userdata partition set
804[ 0.953280 / 01-01 00:00:00.949][3] [120] [emmc_one_binary] card size 63677923328 Byte, card_sec_count 15546368
805[ 0.953310 / 01-01 00:00:00.949][3] [150] PROTECTIVE_MBR_SIZE = 4096
806[ 0.953348 / 01-01 00:00:00.949][3] [150] [emmc_one_binary] backup_lba 15546367
807[ 0.953390 / 01-01 00:00:00.949][3] [150] [emmc_one_binary] Don't need to update GPT.
808[ 0.953420 / 01-01 00:00:00.949][3] [150] Qseecom Init Done in Appsbl
809[ 0.953522 / 01-01 00:00:00.949][3] [150] secure app region addr=0x86600000 size=0x1a00000[150] TZ App region notif returned with status:0 addr:86600000 size:27262976
810[ 0.953586 / 01-01 00:00:00.949][3] [150] TZ App log region register returned with status:0 addr:9191d000 size:4096
811[ 0.953619 / 01-01 00:00:00.949][3] [150] Qseecom TZ Init Done in Appsbl
812[ 0.953643 / 01-01 00:00:00.949][3] [210] Loading cmnlib done
813[ 0.953698 / 01-01 00:00:00.949][3] [210] qseecom_start_app: Loading app keymaster for the first time'
814[ 0.953734 / 01-01 00:00:00.949][3] [240] <8>keymaster: "\"KEYMASTER Init \""
815[ 0.953778 / 01-01 00:00:00.949][3] [240] GPIO 64 Drive stength set to 16mA and gpio_set
816[ 0.953804 / 01-01 00:00:00.949][3] [240] LK SEC APP Handle: 0x1
817[ 0.953852 / 01-01 00:00:00.949][3] [240] <8>keymaster: "\"open_add_km_partition status:0\""
818[ 0.953878 / 01-01 00:00:00.949][3] [250] Device unlock statue 1
819[ 0.953905 / 01-01 00:00:00.949][3] [250] Device unlock count 1
820[ 0.953931 / 01-01 00:00:00.949][3] [250] Device flash count 0
821[ 0.953950 / 01-01 00:00:00.949][3] [250] PIF_DETECT:8
822[ 0.953983 / 01-01 00:00:00.949][3] [250] [Display]backlight level: 793
823[ 0.954002 / 01-01 00:00:00.949][3] [250] PIF_DETECT:8
824[ 0.954034 / 01-01 00:00:00.949][3] [250] [Display]backlight level: 189
825[ 0.954075 / 01-01 00:00:00.949][3] [250] [Display]panel name: sw49407_qhd_dsc_cmd
826[ 0.954105 / 01-01 00:00:00.949][3] [250] [Display]vddio_en_gpio : 69
827[ 0.954140 / 01-01 00:00:00.949][3] [250] oem.panel D : sw49407_qhd_dsc_cmd
828[ 0.954179 / 01-01 00:00:00.949][3] [250] OEM panel override:sw49407_qhd_dsc_cmd
829[ 0.954234 / 01-01 00:00:00.949][3] [250] topology config-1 not supported. fallback to default config1
830[ 0.954262 / 01-01 00:00:00.949][3] [250] panel_operating_mode=0x2
831[ 0.954295 / 01-01 00:00:00.949][3] [260] Return value from recv_data: 14
832[ 0.954328 / 01-01 00:00:00.949][3] [270] Return value from recv_data: 14
833[ 0.954359 / 01-01 00:00:00.949][3] [290] [Display] IBB REVISION4 is 1
834[ 0.954398 / 01-01 00:00:00.949][3] [330] msm_display_init: chargerlogo mode check
835[ 0.954434 / 01-01 00:00:00.949][3] [330] pm8x41_get_is_cold_boot: Warm boot
836[ 0.954482 / 01-01 00:00:00.949][3] [330] target_check_chargerlogo_mode: chargerlogo mode check
837[ 0.954546 / 01-01 00:00:00.949][3] [330] target_check_chargerlogo_mode: cold_boot=0, pon1=160, key=0, cable_type=8
838[ 0.954566 / 01-01 00:00:00.949][3] [390] lglogo_image.
839[ 0.954592 / 01-01 00:00:00.949][3] [390] Config MIPI_CMD_PANEL.
840[ 0.954620 / 01-01 00:00:00.949][3] [530] Turn on MIPI_CMD_PANEL.
841[ 0.954646 / 01-01 00:00:00.949][3] [530] Configure GPIO success
842[ 0.954688 / 01-01 00:00:00.949][3] [540] [Display][lm3697] read reg[0x21] level = 189
843[ 0.954718 / 01-01 00:00:00.949][3] [540] HW Rev(12), vol_up gpio(2)
844[ 0.954756 / 01-01 00:00:00.949][3] [540] target_home_key: should be implemented
845[ 0.954818 / 01-01 00:00:00.949][3] [540] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
846[ 0.954872 / 01-01 00:00:00.949][3] [540] selectmode_check_usb_cable: with usb cable. not factory cable
847[ 0.954917 / 01-01 00:00:00.949][3] [540] target_selectmode_init: selectmode_get_mode()=0
848[ 0.954932 / 01-01 00:00:00.949][3] [540] SM_NONE
849[ 0.954955 / 01-01 00:00:00.949][3] [540] webdload status:0
850[ 0.954980 / 01-01 00:00:00.949][3] [540] dload_reboot status:0
851[ 0.955015 / 01-01 00:00:00.949][3] [540] pm8x41_get_is_cold_boot: Warm boot
852[ 0.955038 / 01-01 00:00:00.949][3] [540] webdload status:0
853[ 0.955070 / 01-01 00:00:00.949][3] [540] LGFTM_LAF_MID_REBOOT_FLAG is 0
854[ 0.955127 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to LG-H918 at model.name
855[ 0.955180 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to rev_10 at lge.rev
856[ 0.955237 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to 400MA at bootcable.type
857[ 0.955295 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to SW3800_VC0 at lge.battid
858[ 0.955347 / 01-01 00:00:00.949][3] [540] bootmode_set_ddr_info: DDR Size info 4294967296 from smem
859[ 0.955393 / 01-01 00:00:00.949][3] [540] bootmode_set_ddr_info: DDR MR info 0x6 from smem
860[ 0.955430 / 01-01 00:00:00.949][3] [540] [CCAudit] Start-up BOOT MODE = normal
861[ 0.955488 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to normal at lge.bootreason
862[ 0.955552 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to 0x77665501 at lge.bootreasoncode
863[ 0.955575 / 01-01 00:00:00.949][3] [540] MSM8996 ver : 0x3
864[ 0.955605 / 01-01 00:00:00.949][3] [540] UFS FORCE Reset count : 0x0
865[ 0.955624 / 01-01 00:00:00.949][3] [540] get_qem = 0
866[ 0.955642 / 01-01 00:00:00.949][3] [540] get_qem = 0
867[ 0.955695 / 01-01 00:00:00.949][3] [540] bootmode_set_factory: put cable_type(8) and qem(0) to smem
868[ 0.955732 / 01-01 00:00:00.949][3] [540] CHARGERLOGO: reboot_mode = 0x77665501
869[ 0.955752 / 01-01 00:00:00.949][3] [540] is_update_gpt
870[ 0.955774 / 01-01 00:00:00.949][3] [540] is_update_gpt: 0
871[ 0.955801 / 01-01 00:00:00.949][3] [540] [LAF] boot_into_laf = 0
872[ 0.955840 / 01-01 00:00:00.949][3] [540] Unable to locate /bootselect partition
873[ 0.955876 / 01-01 00:00:00.949][3] [540] [KSwitch] check kill switch feature
874[ 0.955928 / 01-01 00:00:00.949][3] [540] [KSwitch] check done (do nothing): valid=true, flasg=0x0
875[ 0.955950 / 01-01 00:00:00.949][3] [540] now sniffing = 0
876[ 0.955969 / 01-01 00:00:00.949][3] [540] cc mode 0!!!
877[ 0.956018 / 01-01 00:00:00.949][3] [540] bootcmd_add_pair: value changed from to 0 at cc_mode
878[ 0.956047 / 01-01 00:00:00.949][3] [540] get_encrypt_on_minios = 0
879[ 0.956076 / 01-01 00:00:00.949][3] [540] get_encrypt_on_minios = 0
880[ 0.956107 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable in 0
881[ 0.956139 / 01-01 00:00:00.949][3] [FOTA] : IStorageFlash_SetActiveLun 0
882[ 0.956170 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTHeader - 0, 4096
883[ 0.956200 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTEntry - 0, 8192
884[ 0.956254 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
885[ 0.956304 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(0 pt) : 19, laf, 6000, 3000000
886[ 0.956358 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
887[ 0.956412 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
888[ 0.956466 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(0 pt) : 20, factory, c006000, 4200000
889[ 0.956520 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
890[ 0.956573 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
891[ 0.956630 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(0 pt) : 23, system, 19486000, 15d800000
892[ 0.956683 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
893[ 0.956737 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
894[ 0.956790 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(0 pt) : 49, misc, 6006000, 2000000
895[ 0.956843 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
896[ 0.956875 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable in 1
897[ 0.956907 / 01-01 00:00:00.949][3] [FOTA] : IStorageFlash_SetActiveLun 1
898[ 0.956937 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTHeader - 1, 4096
899[ 0.956968 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTEntry - 1, 8192
900[ 0.957021 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
901[ 0.957070 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(1 pt) : 10, xbl, 6000, 300000
902[ 0.957124 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
903[ 0.957178 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
904[ 0.957229 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(1 pt) : 32, fota, 606000, 400000
905[ 0.957284 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
906[ 0.957316 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable in 2
907[ 0.957349 / 01-01 00:00:00.949][3] [FOTA] : IStorageFlash_SetActiveLun 2
908[ 0.957379 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTHeader - 2, 4096
909[ 0.957410 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTEntry - 2, 8192
910[ 0.957464 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
911[ 0.957514 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(2 pt) : 24, xbl2, 6000, 300000
912[ 0.957568 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
913[ 0.957600 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable in 3
914[ 0.957633 / 01-01 00:00:00.949][3] [FOTA] : IStorageFlash_SetActiveLun 3
915[ 0.957664 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTHeader - 3, 4096
916[ 0.957694 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTEntry - 3, 8192
917[ 0.957725 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable in 4
918[ 0.957758 / 01-01 00:00:00.949][3] [FOTA] : IStorageFlash_SetActiveLun 4
919[ 0.957787 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTHeader - 4, 4096
920[ 0.957818 / 01-01 00:00:00.949][3] [FOTA] : _ReadGPTEntry - 4, 8192
921[ 0.957871 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
922[ 0.957922 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 0, tz, 7906000, 200000
923[ 0.957975 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
924[ 0.958029 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
925[ 0.958079 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 1, rpm, 8906000, 80000
926[ 0.958132 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
927[ 0.958186 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
928[ 0.958239 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 2, modem, 8c46000, 5600000
929[ 0.958292 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
930[ 0.958346 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
931[ 0.958400 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 3, keymaster, e2c6000, 80000
932[ 0.958454 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
933[ 0.958508 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
934[ 0.958560 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 4, devcfg, 8c06000, 20000
935[ 0.958614 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
936[ 0.958668 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
937[ 0.958718 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 5, hyp, 8a06000, 80000
938[ 0.958773 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
939[ 0.958827 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
940[ 0.958878 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 6, pmic, 8b06000, 80000
941[ 0.958932 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
942[ 0.958985 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
943[ 0.959043 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 7, raw_resources, 8106000, 400000
944[ 0.959097 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
945[ 0.959151 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
946[ 0.959201 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 8, sec, e246000, 80000
947[ 0.959255 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
948[ 0.959309 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
949[ 0.959363 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 11, cmnlib, e3c6000, 80000
950[ 0.959416 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
951[ 0.959469 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
952[ 0.959523 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 12, cmnlib64, e4c6000, 80000
953[ 0.959577 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
954[ 0.959631 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
955[ 0.959683 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 16, aboot, 7d06000, 200000
956[ 0.959737 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
957[ 0.959790 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
958[ 0.959841 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 17, boot, 6000, 2800000
959[ 0.959894 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
960[ 0.959948 / 01-01 00:00:00.949][3] [FOTA] : --------------------------------------------------------
961[ 0.960003 / 01-01 00:00:00.949][3] [FOTA] : _SetUAPartitionTable(4 pt) : 18, recovery, 2806000, 2880000
962[ 0.960084 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
963[ 0.960138 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
964[ 0.960190 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 33, tzbak, 7b06000, 200000
965[ 0.960245 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
966[ 0.960299 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
967[ 0.960352 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 34, rpmbak, 8986000, 80000
968[ 0.960406 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
969[ 0.960460 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
970[ 0.960517 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 35, keymasterbak, e346000, 80000
971[ 0.960571 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
972[ 0.960625 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
973[ 0.960681 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 36, devcfgbak, 8c26000, 20000
974[ 0.960734 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
975[ 0.960788 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
976[ 0.960841 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 37, hypbak, 8a86000, 80000
977[ 0.960895 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
978[ 0.960948 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
979[ 0.961002 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 38, pmicbak, 8b86000, 80000
980[ 0.961057 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
981[ 0.961110 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
982[ 0.961172 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 39, raw_resourcesbak, 8506000, 400000
983[ 0.961225 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
984[ 0.961278 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
985[ 0.961334 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 40, cmnlibbak, e446000, 80000
986[ 0.961387 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
987[ 0.961441 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
988[ 0.961497 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 41, cmnlib64bak, e546000, 80000
989[ 0.961551 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
990[ 0.961605 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
991[ 0.961660 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 42, abootbak, 7f06000, 200000
992[ 0.961714 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
993[ 0.961768 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
994[ 0.961826 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable(4 pt) : 43, recoverybak, 5086000, 2880000
995[ 0.961880 / 01-01 00:00:00.959][3] [FOTA] : --------------------------------------------------------
996[ 0.961910 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable in 5
997[ 0.961944 / 01-01 00:00:00.959][3] [FOTA] : IStorageFlash_SetActiveLun 5
998[ 0.961974 / 01-01 00:00:00.959][3] [FOTA] : _ReadGPTHeader - 5, 4096
999[ 0.962005 / 01-01 00:00:00.959][3] [FOTA] : _ReadGPTEntry - 5, 8192
1000[ 0.962036 / 01-01 00:00:00.959][3] [FOTA] : _SetUAPartitionTable in 6
1001[ 0.962069 / 01-01 00:00:00.959][3] [FOTA] : IStorageFlash_SetActiveLun 6
1002[ 0.962100 / 01-01 00:00:00.959][3] [FOTA] : _ReadGPTHeader - 6, 4096
1003[ 0.962131 / 01-01 00:00:00.959][3] [FOTA] : _ReadGPTEntry - 6, 8192
1004[ 0.962171 / 01-01 00:00:00.959][3] [FOTA] : _InitUSDAddress : 166f00000, 166f60000
1005[ 0.962205 / 01-01 00:00:00.959][3] [FOTA] : IStorageFlash_SetActiveLun 1
1006[ 0.962236 / 01-01 00:00:00.959][3] [FOTA] : _CheckUSDMagic : no match
1007[ 0.962269 / 01-01 00:00:00.959][3] [FOTA] : IStorageFlash_SetActiveLun 1
1008[ 0.962301 / 01-01 00:00:00.959][3] [FOTA] : _CheckUSDMagic : no match
1009[ 0.962320 / 01-01 00:00:00.959][3] [550] get_qem = 0
1010[ 0.962342 / 01-01 00:00:00.959][3] [550] Enter normal mode
1011[ 0.962370 / 01-01 00:00:00.959][3] [550] boot from boot partition
1012[ 0.962395 / 01-01 00:00:00.959][3] [550] Device is unlocked!
1013[ 0.962433 / 01-01 00:00:00.959][3] [550] Loading (boot) image (19390464): start
1014[ 0.962470 / 01-01 00:00:00.959][3] [690] Loading (boot) image (19390464): done
1015[ 0.962518 / 01-01 00:00:00.959][3] [690] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
1016[ 0.962561 / 01-01 00:00:00.959][3] [690] Authenticating /boot image (19390464): start
1017[ 0.962606 / 01-01 00:00:00.959][3] [690] boot_verifier: Device is in ORANGE boot state.
1018[ 0.962647 / 01-01 00:00:00.959][3] [690] boot_verifier: Skipping boot verification.
1019[ 0.962691 / 01-01 00:00:00.959][3] [690] boot_verifier: Device is in ORANGE boot state.
1020[ 0.962737 / 01-01 00:00:00.959][3] [690] Authenticating boot image: done return value = 0
1021[ 0.962779 / 01-01 00:00:00.959][3] [690] [CCAudit] Authenticating boot image: Success
1022[ 0.962838 / 01-01 00:00:00.959][3] [690] partition size, image size, round size : 4194304, 4060036, 4063232
1023[ 0.962865 / 01-01 00:00:00.959][3] [730] Raw resources verified.
1024[ 0.962926 / 01-01 00:00:00.959][3] [730] display_boot_state : verifiedboot_orange_01, verifiedboot_orange_02,
1025[ 0.962971 / 01-01 00:00:00.959][3] [760] read_image_info_from_emmc: total_image_num (53)
1026[ 0.963019 / 01-01 00:00:00.959][3] [760] get_image_info: Finding image verifiedboot_orange_01
1027[ 0.963067 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[0].name quick_lglogo_image
1028[ 0.963115 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[1].name load_charger_image
1029[ 0.963171 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[2].name battery_insert_nt_module_image
1030[ 0.963214 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[3].name NT_TYPE_CM1
1031[ 0.963257 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[4].name NT_TYPE_CM2
1032[ 0.963299 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[5].name NT_TYPE_CM3
1033[ 0.963346 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[6].name NT_TYPE_ERROR_MAX
1034[ 0.963393 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[7].name NT_TYPE_ERROR_MIN
1035[ 0.963443 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[8].name NT_TYPE_ERROR_UNKNOWN
1036[ 0.963492 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[9].name NT_TYPE_EU_AUSTRALIA
1037[ 0.963540 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[10].name NT_TYPE_EU_GLOBAL
1038[ 0.963583 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[11].name NT_TYPE_HM1
1039[ 0.963627 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[12].name NT_TYPE_HM2
1040[ 0.963673 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[13].name NT_TYPE_JP_KDDI
1041[ 0.963718 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[14].name NT_TYPE_KR_KT
1042[ 0.963763 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[15].name NT_TYPE_KR_LGU
1043[ 0.963808 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[16].name NT_TYPE_KR_SKT
1044[ 0.963854 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[17].name NT_TYPE_NA_ATT
1045[ 0.963900 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[18].name NT_TYPE_NA_SPR
1046[ 0.963946 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[19].name NT_TYPE_NA_TMUS
1047[ 0.963991 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[20].name NT_TYPE_NA_VZW
1048[ 0.964040 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[21].name NT_TYPE_RESERVED1
1049[ 0.964087 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[22].name NT_TYPE_RESERVED2
1050[ 0.964132 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[23].name downloadmode
1051[ 0.964181 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[24].name factory_reset_image
1052[ 0.964237 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[25].name factory_reset_1st_line_image
1053[ 0.964293 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[26].name factory_reset_2nd_line_image
1054[ 0.964348 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[27].name factory_reset_no_1st_image
1055[ 0.964403 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[28].name factory_reset_yes_1st_image
1056[ 0.964458 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[29].name factory_reset_no_2nd_image
1057[ 0.964513 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[30].name factory_reset_yes_2nd_image
1058[ 0.964559 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[31].name kswitch_factory
1059[ 0.964604 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[32].name kswitch_dload
1060[ 0.964659 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[33].name system_recovery_menu_image
1061[ 0.964716 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[34].name system_recovery_continue_image
1062[ 0.964774 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[35].name system_recovery_wipecache_image
1063[ 0.964835 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[36].name system_recovery_factoryreset_image
1064[ 0.964893 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[37].name system_recovery_powerdown_image
1065[ 0.964950 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[38].name system_recovery_safemode_image
1066[ 0.965006 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[39].name system_recovery_usbmode_image
1067[ 0.965060 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[40].name LGE_PM_NO_BATTERY_QUESTION
1068[ 0.965112 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[41].name LGE_PM_NO_BATTERY_EMPTY
1069[ 0.965160 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[42].name LGE_PM_NO_CHARGER
1070[ 0.965213 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[43].name LGE_PM_WEAK_CHARGING_ON
1071[ 0.965259 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[44].name imei_main_image
1072[ 0.965307 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[45].name imei_guide_image
1073[ 0.965352 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[46].name system_errlogo
1074[ 0.965402 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[47].name verifiedboot_red_01
1075[ 0.965452 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[48].name verifiedboot_red_02
1076[ 0.965504 / 01-01 00:00:00.959][3] [760] get_image_info: img_info[49].name verifiedboot_orange_01
1077[ 0.965556 / 01-01 00:00:00.959][3] [830] display_boot_state: decompress time:0 key rel:0 paused:0
1078[ 0.965583 / 01-01 00:00:00.959][3] [5920] LK SEC APP Handle: 0x1
1079[ 0.965616 / 01-01 00:00:00.959][3] [5920] Input digest : 0x00000001(36)
1080[ 0.965655 / 01-01 00:00:00.959][3] [5920] decompressing gzip kernel image: start
1081[ 0.965690 / 01-01 00:00:00.959][3] [6180] decompressing kernel image: done
1082[ 0.965759 / 01-01 00:00:00.959][3] [6190] Best match DTB tags 246/00000c08/0x00000000/30001/20009/10013/0/0/92a15471/56691
1083[ 0.965824 / 01-01 00:00:00.959][3] [6190] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x10113/0x0/0x0
1084[ 0.965854 / 01-01 00:00:00.959][3] [6190] => KSUT verifier enabled
1085[ 0.965886 / 01-01 00:00:00.959][3] [6190] ksut_global_msm8992 is loaded
1086[ 0.965908 / 01-01 00:00:00.959][3] [6190] No unlock key!
1087[ 0.965957 / 01-01 00:00:00.959][3] [6200] [CCAudit] Enter the boot_linux for kernel startup,,,
1088[ 0.965986 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.rev=rev_10
1089[ 0.966017 / 01-01 00:00:00.959][3] [6200] bootcmd: model.name=LG-H918
1090[ 0.966051 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.bootreason=normal
1091[ 0.966075 / 01-01 00:00:00.959][3] [6200] bootcmd: cc_mode=0
1092[ 0.966098 / 01-01 00:00:00.959][3] [6200] bootcmd: kswitch
1093[ 0.966138 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.bootreasoncode=0x77665501
1094[ 0.966171 / 01-01 00:00:00.959][3] [6200] bootcmd: bootcable.type=400MA
1095[ 0.966204 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.battid=SW3800_VC0
1096[ 0.966247 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.bl_unlock_complete=true
1097[ 0.966282 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.dlcomplete=0
1098[ 0.966323 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.ddr_size=4294967296
1099[ 0.966358 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.ddr_info=0x6
1100[ 0.966391 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.crash_handler=off
1101[ 0.966419 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.hreset=off
1102[ 0.966446 / 01-01 00:00:00.959][3] [6200] bootcmd: boot_cpus=0-3
1103[ 0.966480 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.revision=12
1104[ 0.966514 / 01-01 00:00:00.959][3] [6200] bootcmd: lge.signed_image=false
1105[ 0.966558 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.verifiedbootstate=orange
1106[ 0.966599 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.veritymode=enforcing
1107[ 0.966634 / 01-01 00:00:00.959][3] [6200] bootcmd: androidboot.rpmb_state=1
1108[ 0.966670 / 01-01 00:00:00.959][3] [6200] pm8x41_get_is_cold_boot: Warm boot
1109[ 0.966739 / 01-01 00:00:00.959][3] [6200] target_pause_for_battery_charge : pon_reason is 160 cold_boot:0 charger path: 4
1110[ 0.966767 / 01-01 00:00:00.959][3] [6200] PON_PON_PBL_STATUS:0xc0
1111[ 0.966793 / 01-01 00:00:00.959][3] [6200] PON_PON_REASON1:0xa0
1112[ 0.966823 / 01-01 00:00:00.959][3] [6200] PON_WARM_RESET_REASON1:0x2
1113[ 0.966853 / 01-01 00:00:00.959][3] [6200] PON_WARM_RESET_REASON2:0x0
1114[ 0.966879 / 01-01 00:00:00.959][3] [6200] PON_POFF_REASON1:0x0
1115[ 0.966905 / 01-01 00:00:00.959][3] [6200] PON_POFF_REASON2:0x20
1116[ 0.966935 / 01-01 00:00:00.959][3] [6200] PON_SOFT_RESET_REASON1:0x0
1117[ 0.966965 / 01-01 00:00:00.959][3] [6200] PON_SOFT_RESET_REASON2:0x0
1118[ 0.966992 / 01-01 00:00:00.959][3] [6200] TEMP_ALARM_STATUS1:0x80
1119[ 0.967027 / 01-01 00:00:00.959][3] [6200] SMBCHG_USB_CHGPTH_INT_RT_STS:0x4
1120[ 0.967071 / 01-01 00:00:00.959][3] [6200] target_pause_for_battery_charge: normal boot
1121[ 0.967107 / 01-01 00:00:00.959][3] [6200] oem.panel D : sw49407_qhd_dsc_cmd
1122[ 0.967199 / 01-01 00:00:00.959][3] [6200] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
1123[ 0.967236 / 01-01 00:00:00.959][3] [6200] pm8x41_get_is_cold_boot: Warm boot
1124[ 0.967472 / 01-01 00:00:00.959][3] [6200] cmdline: androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff buildvariant=userdebug lge.rev=rev_10 model.name=LG-H918 lge.bootreason=normal cc_mode=0 kswitch lge.bootreasoncode=0x77[6200] bootcmd_list_deinit : remove all bootcmd_arg
1125[ 0.967504 / 01-01 00:00:00.959][3] [6200] Updating device tree: start
1126[ 0.967535 / 01-01 00:00:00.959][3] [6200] Updating device tree: done
1127[ 0.967571 / 01-01 00:00:00.959][3] [6200] oem.panel D : sw49407_qhd_dsc_cmd
1128[ 0.967600 / 01-01 00:00:00.959][3] [6200] Turn off MIPI_CMD_PANEL.
1129[ 0.967645 / 01-01 00:00:00.959][3] [6200] Continuous splash enabled, keeping panel alive.
1130[ 0.967668 / 01-01 00:00:00.959][3] [6200] RPM GLINK UnInit
1131[ 0.967701 / 01-01 00:00:00.959][3] [6200] Qseecom De-Init Done in Appsbl
1132[ 0.967778 / 01-01 00:00:00.959][3] [6200] booting linux @ 0x80080000, ramdisk @ 0x82200000 (2431887), tags/device tree @ 0x82000000
1133[ 0.967811 / 01-01 00:00:00.959][3] [6200] Jumping to kernel via monitor
1134[ 0.967817 / 01-01 00:00:00.959][3]
1135[ 0.967824 / 01-01 00:00:00.959][3] bootlog_probe: token (null)
1136[ 0.967830 / 01-01 00:00:00.959][3] -------------------------------------------------
1137[ 0.967841 / 01-01 00:00:00.959][3] Trying to free nonexistent resource <00000000c00c0000-00000000c00dffff>
1138[ 0.969421 / 01-01 00:00:00.959][3] [UART CONSOLE][earjack_debugger_probe] disable uart console
1139[ 0.969447 / 01-01 00:00:00.959][3] earjack debugger probed
1140[ 0.972183 / 01-01 00:00:00.969][3] LGE GPIO debugger init done
1141[ 0.972472 / 01-01 00:00:00.969][3] [QFUSE]lge_qfprom_probe : qfprom init
1142[ 0.974014 / 01-01 00:00:00.969][3] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1143[ 0.974157 / 01-01 00:00:00.969][3] [LGE-ADC] lge_adc_qct_probe : Not yet initializing pm-vadc
1144[ 0.975064 / 01-01 00:00:00.969][3] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1145[ 0.975105 / 01-01 00:00:00.969][3] [LGE-CD] cable_detect_probe : lge_adc property failed to get
1146[ 0.976054 / 01-01 00:00:00.969][3] [LGE-CC] lge_charging_controller_probe : LG Charging controller probe done~!!
1147[ 0.976091 / 01-01 00:00:00.969][3] lge_power_changed_work
1148[ 0.977010 / 01-01 00:00:00.969][3] [LGE-HW_REV] lge_hw_rev_probe : Probe Start~!!
1149[ 0.977022 / 01-01 00:00:00.969][3] [LGE-HW_REV] lge_hw_rev_probe : HW_REV : rev_10
1150[ 0.977107 / 01-01 00:00:00.969][3] [LGE-HW_REV] lge_hw_rev_probe : Probe done~!!
1151[ 0.977125 / 01-01 00:00:00.969][3] lge_power_changed_work
1152[ 0.978000 / 01-01 00:00:00.969][3] [LGE-SM] lge_store_mode_probe : LG Store mode probe Start~!!
1153[ 0.978097 / 01-01 00:00:00.969][3] [LGE-SM] lge_store_mode_probe : LG store mode probe done~!!
1154[ 0.978113 / 01-01 00:00:00.969][3] lge_power_changed_work
1155[ 0.979387 / 01-01 00:00:00.969][3] uart_tx_gpio is not available
1156[ 0.979407 / 01-01 00:00:00.969][3] uart_rx_gpio is not available
1157[ 0.979414 / 01-01 00:00:00.969][3] uart_cts_gpio is not available
1158[ 0.979421 / 01-01 00:00:00.969][3] uart_rfr_gpio is not available
1159[ 0.979679 / 01-01 00:00:00.969][3] msm_serial_hs 7570000.uart: msm_hs_probe: error creating logging context
1160[ 0.980450 / 01-01 00:00:00.979][0] sps: BAM device 0x0000000007544000 is not registered yet.
1161[ 0.980484 / 01-01 00:00:00.979][0] sps:BAM 0x0000000007544000 is registered.
1162[ 0.980732 / 01-01 00:00:00.979][0] msm_serial_hs 7570000.uart: msm_hs_probe: error creating tx logging context
1163[ 0.980747 / 01-01 00:00:00.979][0] msm_serial_hs 7570000.uart: msm_hs_probe: error creating rx logging context
1164[ 0.980758 / 01-01 00:00:00.979][0] msm_serial_hs 7570000.uart: msm_hs_probe: error creating usr logging context
1165[ 0.982028 / 01-01 00:00:00.979][3] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
1166[ 0.984265 / 01-01 00:00:00.979][3] msm_serial_hs module loaded
1167[ 0.985105 / 01-01 00:00:00.979][3] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
1168[ 0.985156 / 01-01 00:00:00.979][3] AXI: get_pdata(): Error: Client name not found
1169[ 0.985163 / 01-01 00:00:00.979][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1170[ 0.985170 / 01-01 00:00:00.979][3] msm_serial_hsl_probe: Bus scaling is disabled
1171[ 0.985296 / 01-01 00:00:00.979][3] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
1172[ 0.985395 / 01-01 00:00:00.979][3] msm_hsl_console_setup: console setup on port #0
1173[ 0.987783 / 01-01 00:00:00.979][3] console [ttyHSL0] enabled
1174[ 0.988765 / 01-01 00:00:00.979][3] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
1175[ 0.988851 / 01-01 00:00:00.979][3] AXI: get_pdata(): Error: Client name not found
1176[ 0.988859 / 01-01 00:00:00.979][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1177[ 0.988865 / 01-01 00:00:00.979][3] msm_serial_hsl_probe: Bus scaling is disabled
1178[ 0.988967 / 01-01 00:00:00.979][3] 7574000.serial: ttyHSL1 at MMIO 0x7574000 (irq = 414, base_baud = 460800) is a MSM
1179[ 0.989410 / 01-01 00:00:00.979][3] msm_serial_hsl_init: driver initialized
1180[ 0.989441 / 01-01 00:00:00.989][3] smd_tty_log_init: Unable to create IPC log
1181[ 0.994349 / 01-01 00:00:00.989][3] diag: Failed to create IPC logging context
1182[ 0.999841 / 01-01 00:00:00.989][3] mts_tty_init success
1183[ 0.999867 / 01-01 00:00:00.989][3] DM_APP: lge_dm_tty_init
1184[ 0.999938 / 01-01 00:00:00.989][3] lge_bypass_init
1185[ 0.999974 / 01-01 00:00:00.989][3] lge_bypass_init: success
1186[ 1.011368 / 01-01 00:00:01.009][3] brd: module loaded
1187[ 1.012592 / 01-01 00:00:01.009][3] loop: module loaded
1188[ 1.012776 / 01-01 00:00:01.009][3] zram: Created 1 device(s)
1189[ 1.013818 / 01-01 00:00:01.009][3] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
1190[ 1.013860 / 01-01 00:00:01.009][3] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1191[ 1.013871 / 01-01 00:00:01.009][3] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.013880 / 01-01 00:00:01.009][3] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1192[ 1.014465 / 01-01 00:00:01.009][3] scm_call failed: func id 0x70000006, ret: -1, syscall returns: 0x0, 0x0, 0x0
1193[ 1.014475 / 01-01 00:00:01.009][3] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
1194[ 1.017991 / 01-01 00:00:01.009][3] IrRC: uei,reset-gpio: 995
1195[ 1.018466 / 01-01 00:00:01.009][3] i2c-core: driver [tabla-i2c-core] using legacy suspend method
1196[ 1.018474 / 01-01 00:00:01.009][3] i2c-core: driver [tabla-i2c-core] using legacy resume method
1197[ 1.018531 / 01-01 00:00:01.009][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
1198[ 1.018539 / 01-01 00:00:01.009][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
1199[ 1.018587 / 01-01 00:00:01.009][3] i2c-core: driver [tasha-i2c-core] using legacy suspend method
1200[ 1.018594 / 01-01 00:00:01.009][3] i2c-core: driver [tasha-i2c-core] using legacy resume method
1201[ 1.020468 / 01-01 00:00:01.019][3] Loading PN547 driver
1202[ 1.020560 / 01-01 00:00:01.019][0] pn547: Start async init
1203[ 1.021713 / 01-01 00:00:01.019][0] pn547: pn547_probe() start
1204[ 1.021964 / 01-01 00:00:01.019][0] pn547:IRQ : 9
1205[ 1.021964 / 01-01 00:00:01.019][0] VEN : 12
1206[ 1.021964 / 01-01 00:00:01.019][0] FIRM : 11
1207[ 1.022141 / 01-01 00:00:01.019][0] pn547_probe : requesting IRQ 273
1208[ 1.022293 / 01-01 00:00:01.019][0] pn547: pn547_probe() end
1209[ 1.022349 / 01-01 00:00:01.019][0] pn547: Loading PN547 driver Success!
1210[ 1.022889 / 01-01 00:00:01.019][3] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
1211[ 1.022903 / 01-01 00:00:01.019][3] qce 660000.qcedev: CE device = 0x0
1212[ 1.022903 / 01-01 00:00:01.019][3] , IO base, CE = 0xffffff8003ac0000
1213[ 1.022903 / 01-01 00:00:01.019][3] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
1214[ 1.022903 / 01-01 00:00:01.019][3] IO base BAM = 0x (null)
1215[ 1.022903 / 01-01 00:00:01.019][3] BAM IRQ 156
1216[ 1.022903 / 01-01 00:00:01.019][3] Engines Availability = 0x2011053
1217[ 1.022958 / 01-01 00:00:01.019][3] sps:BAM 0x0000000000644000 is registered.
1218[ 1.023167 / 01-01 00:00:01.019][3] sps:BAM 0x0000000000644000 (va:0xffffff8003b40000) enabled: ver:0x27, number of pipes:16
1219[ 1.023182 / 01-01 00:00:01.019][3] sps:BAM 0x0000000000644000 pipe 3 sharing violation
1220[ 1.023190 / 01-01 00:00:01.019][3] sps:Failed to connect BAM 0xffffffc033ca6000 pipe 3
1221[ 1.023199 / 01-01 00:00:01.019][3] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc033ca6400, rc = -1
1222[ 1.023223 / 01-01 00:00:01.019][3] sps:De-init client in connected state: 0x1535053
1223[ 1.023282 / 01-01 00:00:01.019][3] qce: probe of 660000.qcedev failed with error -1
1224[ 1.025532 / 01-01 00:00:01.019][3] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
1225[ 1.025553 / 01-01 00:00:01.019][3] qcrypto 660000.qcrypto: CE device = 0x0
1226[ 1.025553 / 01-01 00:00:01.019][3] , IO base, CE = 0xffffff8003b80000
1227[ 1.025553 / 01-01 00:00:01.019][3] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
1228[ 1.025553 / 01-01 00:00:01.019][3] IO base BAM = 0x (null)
1229[ 1.025553 / 01-01 00:00:01.019][3] BAM IRQ 156
1230[ 1.025553 / 01-01 00:00:01.019][3] Engines Availability = 0x2011053
1231[ 1.025611 / 01-01 00:00:01.019][3] sps:BAM 0x0000000000644000 is registered.
1232[ 1.025798 / 01-01 00:00:01.019][3] sps:BAM 0x0000000000644000 (va:0xffffff8003c00000) enabled: ver:0x27, number of pipes:16
1233[ 1.026082 / 01-01 00:00:01.019][3] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
1234[ 1.032035 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-ecb-aes
1235[ 1.032170 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-cbc-aes
1236[ 1.032271 / 01-01 00:00:01.029][2] qcrypto 660000.qcrypto: qcrypto-ctr-aes
1237[ 1.032377 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-ecb-des
1238[ 1.032490 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-cbc-des
1239[ 1.032585 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-ecb-3des
1240[ 1.032671 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-cbc-3des
1241[ 1.032758 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-xts-aes
1242[ 1.032845 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-sha1
1243[ 1.032932 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-sha256
1244[ 1.033018 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1245[ 1.033104 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1246[ 1.033193 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1247[ 1.033280 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1248[ 1.033368 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1249[ 1.033454 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1250[ 1.033547 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
1251[ 1.033633 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
1252[ 1.033718 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-aes-ccm
1253[ 1.033803 / 01-01 00:00:01.029][3] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
1254[ 1.036631 / 01-01 00:00:01.029][3] ICE IRQ = 26
1255[ 1.036782 / 01-01 00:00:01.029][3] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1256[ 1.036841 / 01-01 00:00:01.029][3] ICE IRQ = 27
1257[ 1.042355 / 01-01 00:00:01.039][3] qcom_ice_get_pdevice: found ice device ffffffc033c81800
1258[ 1.042382 / 01-01 00:00:01.039][3] qcom_ice_get_pdevice: matching platform device ffffffc0f8310800
1259[ 1.042912 / 01-01 00:00:01.039][3] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
1260[ 1.043574 / 01-01 00:00:01.039][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
1261[ 1.043584 / 01-01 00:00:01.039][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
1262[ 1.044599 / 01-01 00:00:01.039][3] scsi host0: ufshcd
1263[ 1.048411 / 01-01 00:00:01.039][3] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002170000
1264[ 1.061925 / 01-01 00:00:01.059][3] SCSI Media Changer driver v0.25
1265[ 1.066253 / 01-01 00:00:01.059][3] sps: BAM device 0x0000000007584000 is not registered yet.
1266[ 1.066291 / 01-01 00:00:01.059][3] sps:BAM 0x0000000007584000 is registered.
1267[ 1.068434 / 01-01 00:00:01.059][3] spi_master spi12: will run message pump with realtime priority
1268[ 1.070429 / 01-01 00:00:01.069][3] sps:BAM 0x0000000007584000 (va:0xffffff8003c80000) enabled: ver:0x19, number of pipes:24
1269[ 1.071473 / 01-01 00:00:01.069][3] tun: Universal TUN/TAP device driver, 1.6
1270[ 1.071483 / 01-01 00:00:01.069][3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1271[ 1.071545 / 01-01 00:00:01.069][3] PPP generic driver version 2.4.2
1272[ 1.071622 / 01-01 00:00:01.069][3] PPP BSD Compression module registered
1273[ 1.071632 / 01-01 00:00:01.069][3] PPP Deflate Compression module registered
1274[ 1.071671 / 01-01 00:00:01.069][3] PPP MPPE Compression module registered
1275[ 1.071683 / 01-01 00:00:01.069][3] NET: Registered protocol family 24
1276[ 1.073355 / 01-01 00:00:01.069][3] dhd_init_wlan_mem: WIFI MEM Allocated
1277[ 1.073370 / 01-01 00:00:01.069][3] bcm_wifi_init_mem successfully
1278[ 1.073380 / 01-01 00:00:01.069][3] bcm_wifi_init_gpio: target does not use pinctrl for wifi reg on
1279[ 1.073544 / 01-01 00:00:01.069][3] bcm_wifi_init_gpio: gpio_wlan_power=1011
1280[ 1.073716 / 01-01 00:00:01.069][3] bcm_wifi_init_gpio: gpio_hostwake=73
1281[ 1.073728 / 01-01 00:00:01.069][3] bcm_wifi_init_gpio: Failed to request gpio 1011 for bcmdhd_wifi_reg_on:[-16]
1282[ 1.090084 / 01-01 00:00:01.089][3] bcm_wifi_init_gpio successfully
1283[ 1.090093 / 01-01 00:00:01.089][3] skip bcm_wifi_power up here
1284[ 1.090843 / 01-01 00:00:01.089][3] usbcore: registered new interface driver catc
1285[ 1.090855 / 01-01 00:00:01.089][3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
1286[ 1.090879 / 01-01 00:00:01.089][3] usbcore: registered new interface driver pegasus
1287[ 1.090905 / 01-01 00:00:01.089][3] usbcore: registered new interface driver rtl8150
1288[ 1.090930 / 01-01 00:00:01.089][3] usbcore: registered new interface driver r8152
1289[ 1.090939 / 01-01 00:00:01.089][3] hso: ../../../../../../kernel/lge/msm8996/drivers/net/usb/hso.c: Option Wireless
1290[ 1.090993 / 01-01 00:00:01.089][3] usbcore: registered new interface driver hso
1291[ 1.091025 / 01-01 00:00:01.089][3] usbcore: registered new interface driver asix
1292[ 1.091050 / 01-01 00:00:01.089][3] usbcore: registered new interface driver ax88179_178a
1293[ 1.091076 / 01-01 00:00:01.089][3] usbcore: registered new interface driver cdc_ether
1294[ 1.091100 / 01-01 00:00:01.089][3] usbcore: registered new interface driver cdc_eem
1295[ 1.091128 / 01-01 00:00:01.089][3] usbcore: registered new interface driver dm9601
1296[ 1.091154 / 01-01 00:00:01.089][3] usbcore: registered new interface driver sr9700
1297[ 1.091185 / 01-01 00:00:01.089][3] usbcore: registered new interface driver CoreChips
1298[ 1.091217 / 01-01 00:00:01.089][3] usbcore: registered new interface driver smsc75xx
1299[ 1.091249 / 01-01 00:00:01.089][3] usbcore: registered new interface driver smsc95xx
1300[ 1.091273 / 01-01 00:00:01.089][3] usbcore: registered new interface driver gl620a
1301[ 1.091300 / 01-01 00:00:01.089][3] usbcore: registered new interface driver net1080
1302[ 1.091325 / 01-01 00:00:01.089][3] usbcore: registered new interface driver plusb
1303[ 1.091349 / 01-01 00:00:01.089][3] usbcore: registered new interface driver rndis_host
1304[ 1.091376 / 01-01 00:00:01.089][3] usbcore: registered new interface driver cdc_subset
1305[ 1.091400 / 01-01 00:00:01.089][3] usbcore: registered new interface driver zaurus
1306[ 1.091427 / 01-01 00:00:01.089][3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
1307[ 1.091616 / 01-01 00:00:01.089][3] usbcore: registered new interface driver int51x1
1308[ 1.091642 / 01-01 00:00:01.089][3] usbcore: registered new interface driver kalmia
1309[ 1.091668 / 01-01 00:00:01.089][3] usbcore: registered new interface driver ipheth
1310[ 1.091695 / 01-01 00:00:01.089][3] usbcore: registered new interface driver sierra_net
1311[ 1.091719 / 01-01 00:00:01.089][3] usbcore: registered new interface driver cx82310_eth
1312[ 1.091753 / 01-01 00:00:01.089][3] usbcore: registered new interface driver cdc_ncm
1313[ 1.091778 / 01-01 00:00:01.089][3] usbcore: registered new interface driver lg-vl600
1314[ 1.091803 / 01-01 00:00:01.089][3] usbcore: registered new interface driver qmi_wwan
1315[ 1.091828 / 01-01 00:00:01.089][3] usbcore: registered new interface driver cdc_mbim
1316[ 1.092518 / 01-01 00:00:01.089][3] msm_sharedmem: sharedmem_register_qmi: qmi init successful
1317[ 1.095092 / 01-01 00:00:01.089][2] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1318[ 1.099443 / 01-01 00:00:01.089][2] 7411000.qusb supply USB3_GDSC not found, using dummy regulator
1319[ 1.099767 / 01-01 00:00:01.089][2] 7412000.qusb supply USB3_GDSC not found, using dummy regulator
1320[ 1.101112 / 01-01 00:00:01.099][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1321[ 1.103643 / 01-01 00:00:01.099][3] msm-dwc3 6a00000.ssusb: unable to get dbm device
1322[ 1.107088 / 01-01 00:00:01.099][3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1323[ 1.107114 / 01-01 00:00:01.099][3] ehci-pci: EHCI PCI platform driver
1324[ 1.107254 / 01-01 00:00:01.099][3] usbcore: registered new interface driver cdc_acm
1325[ 1.107262 / 01-01 00:00:01.099][3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
1326[ 1.107291 / 01-01 00:00:01.099][3] usbcore: registered new interface driver cdc_wdm
1327[ 1.107319 / 01-01 00:00:01.099][3] usbcore: registered new interface driver uas
1328[ 1.107363 / 01-01 00:00:01.099][3] usbcore: registered new interface driver usb-storage
1329[ 1.107390 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-alauda
1330[ 1.107416 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-cypress
1331[ 1.107439 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-datafab
1332[ 1.107465 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-freecom
1333[ 1.107490 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-isd200
1334[ 1.107512 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-jumpshot
1335[ 1.107535 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-karma
1336[ 1.107557 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-onetouch
1337[ 1.107585 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-realtek
1338[ 1.107608 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-sddr09
1339[ 1.107635 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-sddr55
1340[ 1.107659 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ums-usbat
1341[ 1.107746 / 01-01 00:00:01.099][3] usbcore: registered new interface driver usbserial
1342[ 1.107769 / 01-01 00:00:01.099][3] usbcore: registered new interface driver usbserial_generic
1343[ 1.107791 / 01-01 00:00:01.099][3] usbserial: USB Serial support registered for generic
1344[ 1.107815 / 01-01 00:00:01.099][3] usbcore: registered new interface driver ftdi_sio
1345[ 1.107833 / 01-01 00:00:01.099][3] usbserial: USB Serial support registered for FTDI USB Serial Device
1346[ 1.107859 / 01-01 00:00:01.099][3] usbcore: registered new interface driver pl2303
1347[ 1.107877 / 01-01 00:00:01.099][3] usbserial: USB Serial support registered for pl2303
1348[ 1.107902 / 01-01 00:00:01.099][3] usbcore: registered new interface driver usb_ehset_test
1349[ 1.108691 / 01-01 00:00:01.099][3] anx7688-usbc 6-0028: usb supply not found, deferring probe
1350[ 1.109542 / 01-01 00:00:01.099][3] gbridge_init: gbridge_init successs.
1351[ 1.109555 / 01-01 00:00:01.099][3] u_lgeusb init
1352[ 1.111004 / 01-01 00:00:01.109][3] mousedev: PS/2 mouse device common for all mice
1353[ 1.111266 / 01-01 00:00:01.109][3] usbcore: registered new interface driver iforce
1354[ 1.111306 / 01-01 00:00:01.109][3] usbcore: registered new interface driver xpad
1355[ 1.111338 / 01-01 00:00:01.109][3] usbcore: registered new interface driver usb_acecad
1356[ 1.111366 / 01-01 00:00:01.109][3] usbcore: registered new interface driver aiptek
1357[ 1.111397 / 01-01 00:00:01.109][3] usbcore: registered new interface driver gtco
1358[ 1.111426 / 01-01 00:00:01.109][3] usbcore: registered new interface driver hanwang
1359[ 1.111453 / 01-01 00:00:01.109][3] usbcore: registered new interface driver kbtab
1360[ 1.112936 / 01-01 00:00:01.109][3] [Touch] touch_device_init, sic4945 start
1361[ 1.112991 / 01-01 00:00:01.109][3] [Touch] touch_device_init, sw49407 start
1362[ 1.113644 / 01-01 00:00:01.109][3] [Touch] touch_spi_probe
1363[ 1.113644 / 01-01 00:00:01.109][3] , platform ptr = (null)
1364[ 1.113658 / 01-01 00:00:01.109][3] [Touch] touch_spi_probe : 25 Mhz, chip_select = 0
1365[ 1.113665 / 01-01 00:00:01.109][3] [Touch] platform device register
1366[ 1.113997 / 01-01 00:00:01.109][3] [Touch] start dev.of_node
1367[ 1.114087 / 01-01 00:00:01.109][3] [Touch] fw_image - 0:touch/elsa/L1L57P1_1_07.img
1368[ 1.114093 / 01-01 00:00:01.109][3] [Touch] fw_image - 1:touch/elsa/L1L57P1_1_07.img
1369[ 1.114101 / 01-01 00:00:01.109][3] [Touch] end dev.of_node
1370[ 1.114111 / 01-01 00:00:01.109][3] [Touch] touch_set_device, data:ffffffc0762f5018
1371[ 1.114118 / 01-01 00:00:01.109][3] [Touch] touch_gpio_init - pin:89, name:touch_reset
1372[ 1.114137 / 01-01 00:00:01.109][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1373[ 1.114162 / 01-01 00:00:01.109][3] [Touch] touch_gpio_init - pin:125, name:touch_int
1374[ 1.114172 / 01-01 00:00:01.109][3] [Touch] touch_gpio_direction_input - pin:125
1375[ 1.114185 / 01-01 00:00:01.109][3] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
1376[ 1.114191 / 01-01 00:00:01.109][3] [Touch] touch_gpio_direction_input - pin:-2
1377[ 1.114246 / 01-01 00:00:01.109][3] spi12.0 supply vdd not found, using dummy regulator
1378[ 1.114316 / 01-01 00:00:01.109][3] spi12.0 supply vio not found, using dummy regulator
1379[ 1.114726 / 01-01 00:00:01.109][3] [Touch] pinctrl set active
1380[ 1.115009 / 01-01 00:00:01.109][3] [Touch] sw49407_power, off
1381[ 1.115018 / 01-01 00:00:01.109][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1382[ 1.116076 / 01-01 00:00:01.109][3] [Touch] sw49407_power, on
1383[ 1.116084 / 01-01 00:00:01.109][3] [Touch] touch_gpio_direction_output - pin:89, value:1
1384[ 1.116189 / 01-01 00:00:01.109][3] [Touch] touch_init_input 1439-2719-255-1439-2719-90-10
1385[ 1.116313 / 01-01 00:00:01.109][3] input: touch_dev as /devices/virtual/input/input1
1386[ 1.116574 / 01-01 00:00:01.109][3] [Touch E] [sw49407_notify 1551] 3 is not supported
1387[ 1.116749 / 01-01 00:00:01.109][3] [Touch] watch_fontdata_attr_init font_buffer(42 KB) malloc
1388[ 1.116777 / 01-01 00:00:01.109][3] [Touch] hw_reset_delay : 90 ms
1389[ 1.116799 / 01-01 00:00:01.109][3] [Touch] platform device registered ...
1390[ 1.119760 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_spi_active
1391[ 1.119784 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_reset_reset
1392[ 1.119792 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_reset_active
1393[ 1.119799 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_cs_low
1394[ 1.119807 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_cs_high
1395[ 1.119814 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_cs_active
1396[ 1.119821 / 01-01 00:00:01.109][3] fpc1020 spi8.1: found pin control fpc1020_irq_active
1397[ 1.119890 / 01-01 00:00:01.109][3] fpc1020 spi8.1: fpc1020_probe enable-wakeup
1398[ 1.120258 / 01-01 00:00:01.119][3] fpc1020 spi8.1: Enabling hardware
1399[ 1.123657 / 01-01 00:00:01.119][3] fpc1020 spi8.1: fpc1020_probe: ok
1400[ 1.123702 / 01-01 00:00:01.119][3] fpc1020_init OK
1401[ 1.124108 / 01-01 00:00:01.119][3] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1402[ 1.124307 / 01-01 00:00:01.119][3] i2c /dev entries driver
1403[ 1.159015 / 01-01 00:00:01.149][3] vmem: Up and running with 4 banks of memory from [irq size 270720706505 64bit window disabled]
1404[ 1.177298 / 01-01 00:00:01.169][3] msm_actuator_get_dt_data:772 msm_actuator_get_dt_data gpio count -2
1405[ 1.177332 / 01-01 00:00:01.169][3] msm_camera_pinctrl_init:1462 Getting pinctrl handle failed
1406[ 1.177339 / 01-01 00:00:01.169][3] msm_camera_power_up:1636 Initialization of pinctrl failed
1407[ 1.177349 / 01-01 00:00:01.169][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1408[ 1.187216 / 01-01 00:00:01.179][3] msm_cci_init:1399: hw_version = 0x10040000
1409[ 1.187529 / 01-01 00:00:01.179][3] msm_actuator_get_vcm_version:723 msm_actuator_get_vcm_version: [CHECK] vcm_ver(64) rc(0)
1410[ 1.194243 / 01-01 00:00:01.189][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1411[ 1.196882 / 01-01 00:00:01.189][3] msm_eeprom_platform_probe failed 1833
1412[ 1.197526 / 01-01 00:00:01.189][3] msm_eeprom_platform_probe failed 1833
1413[ 1.198105 / 01-01 00:00:01.189][3] msm_eeprom_i2c_probe failed 943
1414[ 1.200194 / 01-01 00:00:01.199][1] [Touch] touch_ic_init Start
1415[ 1.200228 / 01-01 00:00:01.199][1] [Touch] fb_notif change
1416[ 1.200242 / 01-01 00:00:01.199][1] [Touch] sw49407_init: charger_state = 0x00
1417[ 1.200630 / 01-01 00:00:01.199][1] [Touch] info ptr addr read : 0026425C
1418[ 1.200813 / 01-01 00:00:01.199][1] [Touch] tc status read : 0F7000C0
1419[ 1.200820 / 01-01 00:00:01.199][1] [Touch] ========== Info ADDR ==========
1420[ 1.200828 / 01-01 00:00:01.199][1] [Touch] chip_info_addr : 025C
1421[ 1.200835 / 01-01 00:00:01.199][1] [Touch] reg_info_addr : 0264
1422[ 1.200842 / 01-01 00:00:01.199][1] [Touch] ========== Info ADDR ==========
1423[ 1.200849 / 01-01 00:00:01.199][1] [Touch] Model ID is loaded
1424[ 1.200856 / 01-01 00:00:01.199][1] [Touch] Production Test info checksum is ok
1425[ 1.201149 / 01-01 00:00:01.199][3] msm_ois_platform_probe:1267 msm_ois_platform_probe: No/Error OIS GPIO
1426[ 1.202490 / 01-01 00:00:01.199][1] [Touch] ==Print PT info Data==
1427[ 1.202505 / 01-01 00:00:01.199][1] [Touch] version : v1.07, chip : 9, protocol : 4
1428[ 1.202505 / 01-01 00:00:01.199][1] [Touch]
1429[ 1.202505 / 01-01 00:00:01.199][1] [Touch] fpc : 2, lcm : 4, lot : 9
1430[ 1.202505 / 01-01 00:00:01.199][1] [Touch] product id : L1L57P1
1431[ 1.202505 / 01-01 00:00:01.199][1] [Touch] flash boot : idle, done, crc : ok
1432[ 1.202524 / 01-01 00:00:01.199][1] [Touch] ==Print Config Header Data==
1433[ 1.202532 / 01-01 00:00:01.199][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1434[ 1.203517 / 01-01 00:00:01.199][1] [Touch] resume ts->lpwg.screen on
1435[ 1.203695 / 01-01 00:00:01.199][1] [Touch] sw49407_lpwg_control mode = 0
1436[ 1.203873 / 01-01 00:00:01.199][1] [Touch] swipe disable
1437[ 1.203881 / 01-01 00:00:01.199][1] [Touch] sw49407_tc_driving = 3, 185
1438[ 1.204059 / 01-01 00:00:01.199][1] [Touch] DDI Display Mode = 3
1439[ 1.204400 / 01-01 00:00:01.199][1] [Touch] Reset Cnt : 28
1440[ 1.205452 / 01-01 00:00:01.199][3] msm_sensor_driver_init Enter
1441[ 1.207144 / 01-01 00:00:01.199][3] Enter
1442[ 1.207215 / 01-01 00:00:01.199][3] msm_sensor_get_sub_module_index:309 src_node NULL
1443[ 1.207810 / 01-01 00:00:01.199][3] qcom,cci-master 0, rc 0
1444[ 1.207819 / 01-01 00:00:01.199][3] msm_sensor_driver_get_dt_data qcom,mount-angle 90
1445[ 1.207832 / 01-01 00:00:01.199][3] qcom,misc_regulator (null)
1446[ 1.207838 / 01-01 00:00:01.199][3] msm_sensor_driver_get_dt_data qcom,mclk-23880000 = 0
1447[ 1.207851 / 01-01 00:00:01.199][3] g_sctrl[0] ffffffc0f6523000
1448[ 1.208174 / 01-01 00:00:01.199][3] Enter<3>[ 1.208191 / 01-01 00:00:01.199][3] msm_sensor_get_sub_module_index:309 src_node NULL
1449[ 1.208469 / 01-01 00:00:01.199][3] qcom,cci-master 1, rc 0
1450[ 1.208478 / 01-01 00:00:01.199][3] msm_sensor_driver_get_dt_data qcom,mount-angle 90
1451[ 1.208489 / 01-01 00:00:01.199][3] qcom,misc_regulator (null)
1452[ 1.208495 / 01-01 00:00:01.199][3] msm_sensor_driver_get_dt_data qcom,mclk-23880000 = 0
1453[ 1.208503 / 01-01 00:00:01.199][3] g_sctrl[2] ffffffc0f6524000
1454[ 1.208838 / 01-01 00:00:01.199][3]
1455[ 1.208838 / 01-01 00:00:01.199][3]
1456[ 1.208838 / 01-01 00:00:01.199][3] Enter: msm_sensor_driver_i2c_probeEnter
1457[ 1.208865 / 01-01 00:00:01.199][3] msm_sensor_get_sub_module_index:309 src_node NULL
1458[ 1.209060 / 01-01 00:00:01.199][3] qcom,cci-master 0, rc -22
1459[ 1.209066 / 01-01 00:00:01.199][3] msm_sensor_driver_get_dt_data qcom,mount-angle 270
1460[ 1.209076 / 01-01 00:00:01.199][3] qcom,misc_regulator (null)
1461[ 1.209083 / 01-01 00:00:01.199][3] msm_sensor_driver_get_dt_data qcom,mclk-23880000 = 0
1462[ 1.209091 / 01-01 00:00:01.209][3] g_sctrl[1] ffffffc0f6525000
1463[ 1.214800 / 01-01 00:00:01.209][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
1464[ 1.214831 / 01-01 00:00:01.209][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
1465[ 1.228563 / 01-01 00:00:01.219][3] __msm_jpeg_init:1537] Jpeg Device id 0
1466[ 1.229672 / 01-01 00:00:01.219][3] __msm_jpeg_init:1537] Jpeg Device id 2<6>[ 1.230393 / 01-01 00:00:01.229][1] [Touch] sw49407_te_info : 545, 16.63 ms, 60.11 hz
1467[ 1.230442 / 01-01 00:00:01.229][1] __msm_jpeg_init:1537] Jpeg Device id 3
1468[ 1.230461 / 01-01 00:00:01.229][1] [Touch] get fwpath from def_fwpath : rev:0
1469[ 1.230473 / 01-01 00:00:01.229][1] [Touch] fwpath[touch/elsa/L1L57P1_1_07.img]
1470[ 1.235468 / 01-01 00:00:01.229][3] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1471[ 1.277368 / 01-01 00:00:01.269][0] ufshcd 624000.ufshc: [LGE][UFS] update quirks, manufacturerid:65535, model:ANY_MODEL, quirk:0x80
1472[ 1.281524 / 01-01 00:00:01.279][0] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1473[ 1.281649 / 01-01 00:00:01.279][0] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
1474[ 1.282603 / 01-01 00:00:01.279][0] scsi 0:0:0:49488: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1475[ 1.283778 / 01-01 00:00:01.279][0] scsi 0:0:0:49456: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1476[ 1.284794 / 01-01 00:00:01.279][0] scsi 0:0:0:49476: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1477[ 1.285953 / 01-01 00:00:01.279][3] scsi 0:0:0:0: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1478[ 1.286620 / 01-01 00:00:01.279][3] scsi 0:0:0:1: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1479[ 1.287166 / 01-01 00:00:01.279][3] scsi 0:0:0:2: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1480[ 1.287690 / 01-01 00:00:01.279][3] scsi 0:0:0:3: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1481[ 1.288210 / 01-01 00:00:01.279][3] scsi 0:0:0:4: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1482[ 1.288737 / 01-01 00:00:01.279][3] scsi 0:0:0:5: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1483[ 1.289267 / 01-01 00:00:01.279][3] scsi 0:0:0:6: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1484[ 1.296068 / 01-01 00:00:01.289][2] sdc: sdc1 sdc2 sdc3
1485[ 1.296477 / 01-01 00:00:01.289][1] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
1486[ 1.296885 / 01-01 00:00:01.289][3] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1487[ 1.297000 / 01-01 00:00:01.289][2] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
1488[ 1.298718 / 01-01 00:00:01.289][3] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21
1489[ 1.299130 / 01-01 00:00:01.289][2] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29
1490[ 1.300646 / 01-01 00:00:01.299][3] sdg: sdg1 sdg2
1491[ 1.330059 / 01-01 00:00:01.329][3] msm_fd aa4000.qcom,fd: Face detection halt timeout
1492[ 1.330671 / 01-01 00:00:01.329][3] drv probe : 1233 msm_fd 96
1493[ 1.331674 / 01-01 00:00:01.329][3] usbcore: registered new interface driver uvcvideo
1494[ 1.331684 / 01-01 00:00:01.329][3] USB Video Class driver (1.1.1)
1495[ 1.331950 / 01-01 00:00:01.329][3] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1496[ 1.332084 / 01-01 00:00:01.329][3] SMBCHG: smbchg_probe: USB supply not found, deferring probe
1497[ 1.332585 / 01-01 00:00:01.329][3] FG: fg_of_init: Using external sense
1498[ 1.332597 / 01-01 00:00:01.329][3] FG: fg_of_init: batt_profile_enabled : 1
1499[ 1.332604 / 01-01 00:00:01.329][3] FG: fg_of_init: lge_rid_disable : 0
1500[ 1.332619 / 01-01 00:00:01.329][3] FG: fg_of_init: rconn_mohm : 30
1501[ 1.333396 / 01-01 00:00:01.329][3] FG: cc_soc_store_work: nom_cap_uah zero!
1502[ 1.334233 / 01-01 00:00:01.329][2] FG: fg_batt_missing_irq_handler: batt-missing triggered: present
1503[ 1.335311 / 01-01 00:00:01.329][3] FG: fg_probe: rbias software control : 0
1504[ 1.335320 / 01-01 00:00:01.329][3] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1505[ 1.337966 / 01-01 00:00:01.329][3] panic-handler: free[@0xc0100000+@0xc00000)
1506[ 1.343683 / 01-01 00:00:01.339][3] FG: fg_set_resume_soc: recharge_M resume soc lowered to 0xf7
1507[ 1.373579 / 01-01 00:00:01.369][3] device-mapper: uevent: version 1.0.3
1508[ 1.373754 / 01-01 00:00:01.369][3] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1509[ 1.373860 / 01-01 00:00:01.369][3] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1510[ 1.373860 / 01-01 00:00:01.369][3]
1511[ 1.376122 / 01-01 00:00:01.369][3] msm8996-pinctrl 1010000.pinctrl: pin GPIO_19 already requested by a0c000.qcom,cci; cannot claim for bcm43xx
1512[ 1.376143 / 01-01 00:00:01.369][3] msm8996-pinctrl 1010000.pinctrl: pin-19 (bcm43xx) status -22
1513[ 1.376153 / 01-01 00:00:01.369][3] msm8996-pinctrl 1010000.pinctrl: could not request pin 19 (GPIO_19) from group gpio19 on device 1010000.pinctrl
1514[ 1.376161 / 01-01 00:00:01.369][3] bcm43xx_bluetooth bcm43xx: Error applying setting, reverse things back
1515[ 1.376335 / 01-01 00:00:01.369][3] msm8996-pinctrl 1010000.pinctrl: pin GPIO_19 already requested by a0c000.qcom,cci; cannot claim for bcm43xx
1516[ 1.376345 / 01-01 00:00:01.369][3] msm8996-pinctrl 1010000.pinctrl: pin-19 (bcm43xx) status -22
1517[ 1.376353 / 01-01 00:00:01.369][3] msm8996-pinctrl 1010000.pinctrl: could not request pin 19 (GPIO_19) from group gpio19 on device 1010000.pinctrl
1518[ 1.376361 / 01-01 00:00:01.369][3] bcm43xx_bluetooth bcm43xx: Error applying setting, reverse things back
1519[ 1.376369 / 01-01 00:00:01.369][3] bcm43xx_bluetooth bcm43xx: bcm43xx_bluetooth_dev_init(): failed to select active state
1520[ 1.376375 / 01-01 00:00:01.369][3] bcm43xx_bluetooth bcm43xx: bcm43xx_bluetooth_probe(): dev init failed
1521[ 1.376400 / 01-01 00:00:01.369][3] bcm43xx_bluetooth: probe of bcm43xx failed with error -22
1522[ 1.376775 / 01-01 00:00:01.369][3] Bluetooth: bluesleep_init: BlueSleep Mode Driver Ver 1.2
1523[ 1.378657 / 01-01 00:00:01.369][3] Bluetooth: ffffffc0f889bb20Bluetooth: ffffffc0f889bb20
1524[ 1.379475 / 01-01 00:00:01.369][3] sdhci: Secure Digital Host Controller Interface driver
1525[ 1.379486 / 01-01 00:00:01.369][3] sdhci: Copyright(c) Pierre Ossman
1526[ 1.379495 / 01-01 00:00:01.369][3] sdhci-pltfm: SDHCI platform and OF driver helper
1527[ 1.380611 / 01-01 00:00:01.379][3] qcom_ice_get_pdevice: found ice device ffffffc033c81c00
1528[ 1.380625 / 01-01 00:00:01.379][3] qcom_ice_get_pdevice: matching platform device ffffffc0f8310c00
1529[ 1.381075 / 01-01 00:00:01.379][3] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
1530[ 1.395599 / 01-01 00:00:01.389][0] sdhci_msm 74a4900.sdhci: No vmmc regulator found
1531[ 1.395629 / 01-01 00:00:01.389][0] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
1532[ 1.396010 / 01-01 00:00:01.389][0] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
1533[ 1.440373 / 01-01 00:00:01.439][0] drv probe : 1381 sdhci_msm 59
1534[ 1.450342 / 01-01 00:00:01.449][2] hidraw: raw HID events driver (C) Jiri Kosina
1535[ 1.451737 / 01-01 00:00:01.449][2] usbcore: registered new interface driver usbhid
1536[ 1.451750 / 01-01 00:00:01.449][2] usbhid: USB HID core driver
1537[ 1.452215 / 01-01 00:00:01.449][3] ashmem: initialized
1538[ 1.452310 / 01-01 00:00:01.449][3] logger: created 256K log 'log_main'
1539[ 1.452378 / 01-01 00:00:01.449][3] logger: created 256K log 'log_events'
1540[ 1.452449 / 01-01 00:00:01.449][3] logger: created 256K log 'log_radio'
1541[ 1.452528 / 01-01 00:00:01.449][3] logger: created 256K log 'log_system'
1542[ 1.453506 / 01-01 00:00:01.449][3] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1543[ 1.464898 / 01-01 00:00:01.459][3] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1544[ 1.466627 / 01-01 00:00:01.459][3] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1545[ 1.466675 / 01-01 00:00:01.459][3] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1546[ 1.469154 / 01-01 00:00:01.459][3] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1547[ 1.473349 / 01-01 00:00:01.469][3] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1548[ 1.473473 / 01-01 00:00:01.469][3] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1549[ 1.473588 / 01-01 00:00:01.469][3] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1550[ 1.473693 / 01-01 00:00:01.469][3] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1551[ 1.474710 / 01-01 00:00:01.469][3] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1552[ 1.477165 / 01-01 00:00:01.469][3] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.0
1553[ 1.477423 / 01-01 00:00:01.469][3] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310C-V005-20160617_153829_12623
1554[ 1.478002 / 01-01 00:00:01.469][3] usbcore: registered new interface driver snd-usb-audio
1555[ 1.478040 / 01-01 00:00:01.469][3] usbcore: registered new interface driver snd-ua101
1556[ 1.478075 / 01-01 00:00:01.469][3] usbcore: registered new interface driver snd-usb-caiaq
1557[ 1.478108 / 01-01 00:00:01.469][3] usbcore: registered new interface driver snd-usb-6fire
1558[ 1.480296 / 01-01 00:00:01.479][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1559[ 1.480324 / 01-01 00:00:01.479][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1560[ 1.480492 / 01-01 00:00:01.479][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1561[ 1.480507 / 01-01 00:00:01.479][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1562[ 1.481749 / 01-01 00:00:01.479][3] es9218_init()
1563[ 1.481794 / 01-01 00:00:01.479][3] es9218_probe
1564[ 1.481805 / 01-01 00:00:01.479][3] es9218_hw_rev_check() lg board2 rev_(12)
1565[ 1.481867 / 01-01 00:00:01.479][3] es9218_populate_get_pdata: reset gpio 989
1566[ 1.481883 / 01-01 00:00:01.479][3] es9218_populate_get_pdata: hph switch 1013<6>[ 1.481899 / 01-01 00:00:01.479][3] es9218_populate_get_pdata: power gpio 1014
1567[ 1.482047 / 01-01 00:00:01.479][3] es9218_probe() g_ess_rev:2
1568[ 1.482064 / 01-01 00:00:01.479][3] snd_soc_register_codec ret = 0
1569[ 1.492326 / 01-01 00:00:01.489][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1570[ 1.492597 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1571[ 1.492609 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1572[ 1.492763 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1573[ 1.492774 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1574[ 1.492927 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1575[ 1.492937 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1576[ 1.493088 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1577[ 1.493098 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1578[ 1.493121 / 01-01 00:00:01.489][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1579[ 1.493265 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1580[ 1.493275 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1581[ 1.493425 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1582[ 1.493434 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1583[ 1.493582 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1584[ 1.493592 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1585[ 1.493742 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1586[ 1.493752 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1587[ 1.493774 / 01-01 00:00:01.489][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1588[ 1.493918 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1589[ 1.493927 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1590[ 1.494073 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1591[ 1.494083 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1592[ 1.494230 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1593[ 1.494240 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1594[ 1.494388 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1595[ 1.494398 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1596[ 1.494421 / 01-01 00:00:01.489][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1597[ 1.494565 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1598[ 1.494576 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1599[ 1.494722 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1600[ 1.494732 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1601[ 1.494877 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1602[ 1.494887 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1603[ 1.495031 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1604[ 1.495040 / 01-01 00:00:01.489][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1605[ 1.497511 / 01-01 00:00:01.489][3] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1606[ 1.509674 / 01-01 00:00:01.499][3] GACT probability NOT on
1607[ 1.509694 / 01-01 00:00:01.499][3] Mirror/redirect action on
1608[ 1.509925 / 01-01 00:00:01.499][3] netem: version 1.3
1609[ 1.509939 / 01-01 00:00:01.499][3] u32 classifier
1610[ 1.509945 / 01-01 00:00:01.499][3] Actions configured
1611[ 1.509962 / 01-01 00:00:01.499][3] Netfilter messages via NETLINK v0.30.
1612[ 1.509991 / 01-01 00:00:01.499][3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1613[ 1.510246 / 01-01 00:00:01.509][3] ctnetlink v0.93: registering with nfnetlink.
1614[ 1.510560 / 01-01 00:00:01.509][3] xt_time: kernel timezone is -0000
1615[ 1.510580 / 01-01 00:00:01.509][3] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478
1616[ 1.510586 / 01-01 00:00:01.509][3] vpnclient kernel spd loaded.
1617[ 1.510732 / 01-01 00:00:01.509][3] ip_tables: (C) 2000-2006 Netfilter Core Team
1618[ 1.510806 / 01-01 00:00:01.509][3] arp_tables: (C) 2002 David S. Miller
1619[ 1.510833 / 01-01 00:00:01.509][3] TCP: bic registered
1620[ 1.510841 / 01-01 00:00:01.509][3] TCP: cubic registered
1621[ 1.510849 / 01-01 00:00:01.509][3] Initializing XFRM netlink socket
1622[ 1.511020 / 01-01 00:00:01.509][3] NET: Registered protocol family 10
1623[ 1.511432 / 01-01 00:00:01.509][3] now = 4294937447, schedule = 4294949491, rounded schedule = 4294949591 => 4294949491
1624[ 1.511511 / 01-01 00:00:01.509][3] mip6: Mobile IPv6
1625[ 1.511528 / 01-01 00:00:01.509][3] ip6_tables: (C) 2000-2006 Netfilter Core Team
1626[ 1.511596 / 01-01 00:00:01.509][3] sit: IPv6 over IPv4 tunneling driver
1627[ 1.511814 / 01-01 00:00:01.509][3] NET: Registered protocol family 17
1628[ 1.511831 / 01-01 00:00:01.509][3] NET: Registered protocol family 15
1629[ 1.511861 / 01-01 00:00:01.509][3] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1630[ 1.511869 / 01-01 00:00:01.509][3] Ebtables v2.0 registered
1631[ 1.511962 / 01-01 00:00:01.509][3] l2tp_core: L2TP core driver, V2.0
1632[ 1.511974 / 01-01 00:00:01.509][3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1633[ 1.511981 / 01-01 00:00:01.509][3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1634[ 1.511997 / 01-01 00:00:01.509][3] l2tp_netlink: L2TP netlink interface
1635[ 1.512015 / 01-01 00:00:01.509][3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1636[ 1.512039 / 01-01 00:00:01.509][3] l2tp_debugfs: L2TP debugfs support
1637[ 1.512046 / 01-01 00:00:01.509][3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1638[ 1.512945 / 01-01 00:00:01.509][3] NET: Registered protocol family 27
1639[ 1.514410 / 01-01 00:00:01.509][2] usb_otg_vreg: no parameters
1640[ 1.514505 / 01-01 00:00:01.509][2] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1641[ 1.514561 / 01-01 00:00:01.509][2] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1642[ 1.516355 / 01-01 00:00:01.509][3] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1643[ 1.517109 / 01-01 00:00:01.509][2] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1644[ 1.517972 / 01-01 00:00:01.509][2] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1645[ 1.518427 / 01-01 00:00:01.509][2] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1646[ 1.518560 / 01-01 00:00:01.509][2] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1647[ 1.518627 / 01-01 00:00:01.509][2] [LGE-ADC] lge_adc_qct_probe : XO_THERM_CH : 114, PA0_THERM_CH : 117, PA1_THERM_CH : 119
1648[ 1.518633 / 01-01 00:00:01.509][2] [LGE-ADC] lge_adc_qct_probe : BD1_THERM_CH : 255, BD2_THERM_CH : 116
1649[ 1.518639 / 01-01 00:00:01.509][2] [LGE-ADC] lge_adc_qct_probe : BATT_THERM_CH : -22, USB_ID_CH : 57
1650[ 1.518713 / 01-01 00:00:01.509][2] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe done!!!
1651[ 1.518724 / 01-01 00:00:01.509][2] lge_power_changed_work
1652[ 1.518812 / 01-01 00:00:01.509][2] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1653[ 1.518919 / 01-01 00:00:01.509][2] lge_power_changed_work
1654[ 1.518934 / 01-01 00:00:01.509][2] [LGE-CC] lgcc_vote_fcc_update : lgcc_vote: vote id[0], set cur[3100]
1655[ 1.518951 / 01-01 00:00:01.509][2] [LGE-CC] lge_check_typec_work : Check c-type cable
1656[ 1.518959 / 01-01 00:00:01.509][2] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1657[ 1.518966 / 01-01 00:00:01.509][2] lge_power_changed_work
1658[ 1.520314 / 01-01 00:00:01.519][2] [LGE-CD] cable_detect_read_cable_info : adc = 1793000
1659[ 1.520320 / 01-01 00:00:01.519][2] [LGE-CD] cable_detect_read_cable_info : cable info --> 14
1660[ 1.520325 / 01-01 00:00:01.519][2] [LGE-CD] cable_detect_probe : cable_detect probe end!
1661[ 1.521218 / 01-01 00:00:01.519][3] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1662[ 1.536818 / 01-01 00:00:01.529][3] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1663[ 1.537876 / 01-01 00:00:01.529][3] sps:BAM 0x0000000006b04000 is registered.
1664[ 1.539572 / 01-01 00:00:01.529][3] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1665[ 1.539615 / 01-01 00:00:01.529][3] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1666[ 1.539775 / 01-01 00:00:01.529][3] lge_power_changed_work
1667[ 1.539806 / 01-01 00:00:01.529][3] [LGE-CC] lge_check_typec_work : Check c-type cable
1668[ 1.539814 / 01-01 00:00:01.529][3] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1669[ 1.540090 / 01-01 00:00:01.539][3] anx7688-usbc 6-0028: battery supply not found, deferring probe
1670[ 1.540158 / 01-01 00:00:01.539][3] SMBCHG: smbchg_probe: Success get LG power class property
1671[ 1.540281 / 01-01 00:00:01.539][3] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1672[ 1.540306 / 01-01 00:00:01.539][3] SMBCHG: smbchg_check_chg_version: pmic=PMI8996, wa_flags=0xf0, hvdcp_supported=true
1673[ 1.540328 / 01-01 00:00:01.539][3] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
1674[ 1.540428 / 01-01 00:00:01.539][3] smbcharger_charger_otg: no parameters
1675[ 1.540533 / 01-01 00:00:01.539][3] smbcharger_external_otg: no parameters
1676[ 1.540557 / 01-01 00:00:01.539][3] smbcharger_external_otg: supplied by pmi8994_boost_5v
1677[ 1.540634 / 01-01 00:00:01.539][3] SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 2.1
1678[ 1.540697 / 01-01 00:00:01.539][3] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 45s
1679[ 1.541250 / 01-01 00:00:01.539][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1680[ 1.541257 / 01-01 00:00:01.539][3] SMBCHG: battchg_suspend: 1 voting for 0 - off
1681[ 1.541318 / 01-01 00:00:01.539][3] SMBCHG: smbchg_hw_init: set vfloat to 4400
1682[ 1.541378 / 01-01 00:00:01.539][3] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
1683[ 1.541601 / 01-01 00:00:01.539][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1684[ 1.541607 / 01-01 00:00:01.539][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1685[ 1.541648 / 01-01 00:00:01.539][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1686[ 1.541739 / 01-01 00:00:01.539][3] ------------[ cut here ]------------
1687[ 1.541753 / 01-01 00:00:01.539][3] WARNING: CPU: 3 PID: 99 at ../../../../../../kernel/lge/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
1688[ 1.541758 / 01-01 00:00:01.539][3] Unbalanced enable for IRQ 131
1689[ 1.541763 / 01-01 00:00:01.539][3] Modules linked in:
1690[ 1.541772 / 01-01 00:00:01.539][3] CPU: 3 PID: 99 Comm: kworker/3:1 Not tainted 3.18.31-LineageOS-g1e68e82 #1
1691[ 1.541777 / 01-01 00:00:01.539][3] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
1692[ 1.541788 / 01-01 00:00:01.539][3] Workqueue: events status_change_work
1693[ 1.541794 / 01-01 00:00:01.539][3] Call trace:
1694[ 1.541802 / 01-01 00:00:01.539][3] [<ffffffc000089878>] dump_backtrace+0x0/0x23c
1695[ 1.541808 / 01-01 00:00:01.539][3] [<ffffffc000089ac8>] show_stack+0x14/0x1c
1696[ 1.541818 / 01-01 00:00:01.539][3] [<ffffffc000ce3c10>] dump_stack+0x88/0xac
1697[ 1.541826 / 01-01 00:00:01.539][3] [<ffffffc0000a2150>] warn_slowpath_common+0x8c/0xb0
1698[ 1.541832 / 01-01 00:00:01.539][3] [<ffffffc0000a21c4>] warn_slowpath_fmt+0x50/0x58
1699[ 1.541838 / 01-01 00:00:01.539][3] [<ffffffc0000eeef0>] __enable_irq+0x40/0x88
1700[ 1.541844 / 01-01 00:00:01.539][3] [<ffffffc0000eefa0>] enable_irq+0x68/0x78
1701[ 1.541850 / 01-01 00:00:01.539][3] [<ffffffc00086ac68>] status_change_work+0x154/0xb4c
1702[ 1.541858 / 01-01 00:00:01.539][3] [<ffffffc0000b74a8>] process_one_work+0x25c/0x438
1703[ 1.541864 / 01-01 00:00:01.539][3] [<ffffffc0000b7e94>] worker_thread+0x324/0x440
1704[ 1.541870 / 01-01 00:00:01.539][3] [<ffffffc0000bbe3c>] kthread+0xe4/0xec
1705[ 1.541897 / 01-01 00:00:01.539][3] ---[ end trace f42fe0f385dece47 ]---
1706[ 1.541925 / 01-01 00:00:01.539][0] vote: name[SMBCHG: usb_suspend], client_id[0], state[0], val[0]
1707[ 1.541937 / 01-01 00:00:01.539][0] SMBCHG: usb_suspend: 0 voting for 0 - off
1708[ 1.541945 / 01-01 00:00:01.539][0] vote: name[SMBCHG: dc_suspend], client_id[0], state[0], val[0]
1709[ 1.541952 / 01-01 00:00:01.539][0] SMBCHG: dc_suspend: 0 voting for 0 - off
1710[ 1.542211 / 01-01 00:00:01.539][0] vote: name[SMBCHG: dcl_icl], client_id[0], state[1], val[1500]
1711[ 1.542219 / 01-01 00:00:01.539][0] SMBCHG: dcl_icl: 0 voting for 1500 - on
1712[ 1.542225 / 01-01 00:00:01.539][0] SMBCHG: dcl_icl: vote_min min_vote=1500, client_index=0
1713[ 1.542317 / 01-01 00:00:01.539][0] SMBCHG: dcl_icl: effective vote is now 1500 voted by 0
1714[ 1.542323 / 01-01 00:00:01.539][0] SMBCHG: smbchg_set_dc_current_max: dc current set to 1500 mA
1715[ 1.542541 / 01-01 00:00:01.539][0] vote: name[SMBCHG: fcc], client_id[1], state[1], val[3100]
1716[ 1.542548 / 01-01 00:00:01.539][0] SMBCHG: fcc: 1 voting for 3100 - on
1717[ 1.542554 / 01-01 00:00:01.539][0] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
1718[ 1.542559 / 01-01 00:00:01.539][0] SMBCHG: fcc: effective vote is now 3100 voted by 1
1719[ 1.542636 / 01-01 00:00:01.539][0] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 3100, set to 3000
1720[ 1.542815 / 01-01 00:00:01.539][0] vote: name[SMBCHG: hwaicl_enable_indirect], client_id[0], state[1], val[0]
1721[ 1.542822 / 01-01 00:00:01.539][0] SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
1722[ 1.542829 / 01-01 00:00:01.539][0] vote: name[SMBCHG: hwaicl_disable], client_id[0], state[0], val[0]
1723[ 1.542835 / 01-01 00:00:01.539][0] SMBCHG: hwaicl_disable: 0 voting for 0 - off
1724[ 1.543024 / 01-01 00:00:01.539][0] SMBCHG: batt_pres_handler: triggered: 0x00
1725[ 1.543031 / 01-01 00:00:01.539][0] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1726[ 1.543039 / 01-01 00:00:01.539][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1727[ 1.543090 / 01-01 00:00:01.539][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1728[ 1.543201 / 01-01 00:00:01.539][0] SMBCHG: usbid_change_handler: triggered
1729[ 1.543215 / 01-01 00:00:01.539][0] FG: set_resume_soc_work: recharge_M 0(ta)-0(lowered)-0(chg_done)-1(health)
1730[ 1.570236 / 01-01 00:00:01.569][0] SMBCHG: get_property_from_typec: typec psy doesn't prepared
1731[ 1.570281 / 01-01 00:00:01.569][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1732[ 1.570972 / 01-01 00:00:01.569][0] SMBCHG: handle_usb_insertion: triggered
1733[ 1.571012 / 01-01 00:00:01.569][0] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1734[ 1.571019 / 01-01 00:00:01.569][0] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
1735[ 1.571028 / 01-01 00:00:01.569][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1736[ 1.571035 / 01-01 00:00:01.569][0] SMBCHG: usb_icl: 0 voting for 100 - on
1737[ 1.571040 / 01-01 00:00:01.569][0] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
1738[ 1.571046 / 01-01 00:00:01.569][0] SMBCHG: usb_icl: effective vote is now 100 voted by 0
1739[ 1.571052 / 01-01 00:00:01.569][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1740[ 1.571059 / 01-01 00:00:01.569][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
1741[ 1.571065 / 01-01 00:00:01.569][0] SMBCHG: usb_suspend: 2 voting for 0 - off
1742[ 1.571160 / 01-01 00:00:01.569][0] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
1743[ 1.571182 / 01-01 00:00:01.569][0] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1744[ 1.571189 / 01-01 00:00:01.569][0] SMBCHG: usb_icl: 9 voting for 2000 - on
1745[ 1.571194 / 01-01 00:00:01.569][0] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
1746[ 1.571204 / 01-01 00:00:01.569][0] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1747[ 1.571219 / 01-01 00:00:01.569][0] [DWC3] factory mode 0
1748[ 1.571228 / 01-01 00:00:01.569][0] dwc3_floated_chg_check: start check floated charger
1749[ 1.571357 / 01-01 00:00:01.569][0] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:0
1750[ 1.571364 / 01-01 00:00:01.569][0] dwc3_ext_event_notify
1751[ 1.571844 / 01-01 00:00:01.569][0] msm-dwc3 6a00000.ssusb: undefined state, vbus:online
1752[ 1.572270 / 01-01 00:00:01.569][0] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x20 (ok)
1753[ 1.573023 / 01-01 00:00:01.569][0] [LGE-CD] lge_cable_detect_external_power_changed : chg_present 1, prev 0
1754[ 1.573033 / 01-01 00:00:01.569][0] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1755[ 1.573052 / 01-01 00:00:01.569][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1756[ 1.573215 / 01-01 00:00:01.569][0] lge_power_changed_work
1757[ 1.573234 / 01-01 00:00:01.569][0] [LGE-CC] lge_cc_external_lge_power_changed : usb present : 1
1758[ 1.575209 / 01-01 00:00:01.569][0] SMB1351 smb1351_fastchg_current_set: smb1351_fastchg_current_set - fastchg_current[1000]
1759[ 1.575832 / 01-01 00:00:01.569][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1760[ 1.577006 / 01-01 00:00:01.569][0] SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0
1761[ 1.577390 / 01-01 00:00:01.569][0] SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4
1762[ 1.581412 / 01-01 00:00:01.579][0] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1763[ 1.581446 / 01-01 00:00:01.579][0] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1764[ 1.581453 / 01-01 00:00:01.579][0] dwc3_ext_event_notify
1765[ 1.601898 / 01-01 00:00:01.599][0] [DWC3] factory mode 0
1766[ 1.608758 / 01-01 00:00:01.599][1] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1767[ 1.608769 / 01-01 00:00:01.599][1] SMBCHG: smbchg_probe: smbchg_probe end
1768[ 1.608779 / 01-01 00:00:01.599][1] drv probe : 1540 qpnp-smbcharger 68
1769[ 1.611957 / 01-01 00:00:01.609][1] usb_otg_vreg: no parameters
1770[ 1.612005 / 01-01 00:00:01.609][1] usb_otg_vreg: supplied by smbcharger_external_otg
1771[ 1.613082 / 01-01 00:00:01.609][1] anx7688-usbc 6-0028: usb pd max volt: 9000mV, max power: 27000mW, min power: 3000mW
1772[ 1.613344 / 01-01 00:00:01.609][1] msm-dwc3 6a00000.ssusb: b_peripheral state, vbus:online
1773[ 1.613365 / 01-01 00:00:01.609][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1774[ 1.616100 / 01-01 00:00:01.609][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1775[ 1.616110 / 01-01 00:00:01.609][1] SMBCHG: battchg_suspend: votes unchanged; skipping
1776[ 1.625676 / 01-01 00:00:01.619][1] FG: update_sram_data: soc:[50], soc_raw[7310], voltage:[4004493], ocv:[4053626], current:[324552], batt_temp:[-22], charge_raw [0 / 0]
1777[ 1.625687 / 01-01 00:00:01.619][1] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
1778[ 1.625701 / 01-01 00:00:01.619][1] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1779[ 1.625749 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1780[ 1.625756 / 01-01 00:00:01.619][1] SMBCHG: usb_icl: 0 voting for 0 - on
1781[ 1.625762 / 01-01 00:00:01.619][1] SMBCHG: usb_icl: vote_min min_vote=0, client_index=0
1782[ 1.625767 / 01-01 00:00:01.619][1] SMBCHG: usb_icl: effective vote is now 0 voted by 0
1783[ 1.625774 / 01-01 00:00:01.619][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
1784[ 1.625780 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_suspend], client_id[2], state[1], val[0]
1785[ 1.625787 / 01-01 00:00:01.619][1] SMBCHG: usb_suspend: 2 voting for 0 - on
1786[ 1.625826 / 01-01 00:00:01.619][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
1787[ 1.625849 / 01-01 00:00:01.619][1] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
1788[ 1.625860 / 01-01 00:00:01.619][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1789[ 1.625902 / 01-01 00:00:01.619][2] SMBCHG: power_ok_handler: triggered: 0x00
1790[ 1.629905 / 01-01 00:00:01.619][3] SMBCHG: fastchg_handler: p2f triggered
1791[ 1.629953 / 01-01 00:00:01.619][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1792[ 1.634602 / 01-01 00:00:01.629][2] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x21 (ok)
1793[ 2.130076 / 01-01 00:00:02.129][1] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1794[ 2.130119 / 01-01 00:00:02.129][1] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1795[ 2.130127 / 01-01 00:00:02.129][1] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
1796[ 2.640069 / 01-01 00:00:02.639][1] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
1797[ 2.640103 / 01-01 00:00:02.639][1] SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
1798[ 2.862198 / 01-01 00:00:02.859][3] FG: comp_temp_by_chg_current: fg_temp = 332 comp_temp1 = 302 comp_temp2 = 302 delta1 = -30 delta2 = 0 avg_chg_curr = 0 now_chg_curr = 0 batt_charging = 0
1799[ 2.862305 / 01-01 00:00:02.859][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[1], val[0]
1800[ 2.862312 / 01-01 00:00:02.859][3] SMBCHG: battchg_suspend: 0 voting for 0 - on
1801[ 2.862318 / 01-01 00:00:02.859][3] SMBCHG: charging_suspend_vote_cb: client[0], suspend[1], last_client[0], last_suspend[1]
1802[ 2.872144 / 01-01 00:00:02.869][3] FG: update_sram_data: soc:[50], soc_raw[7310], voltage:[4004493], ocv:[4053626], current:[324552], batt_temp:[302], charge_raw [0 / 0]
1803[ 3.570085 / 01-01 00:00:03.569][0] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
1804[ 3.570098 / 01-01 00:00:03.569][0] LGE charging scenario : state 0 -> 0(0-1), temp=30, volt=4004, BTM=0, charger=1, cur_set=0/0, chg_cur = 324
1805[ 3.570106 / 01-01 00:00:03.569][0] [LGE-CC] lge_monitor_batt_temp_work : ibatmax_set CHG_BATT_NORMAL_STATE
1806[ 3.570114 / 01-01 00:00:03.569][0] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
1807[ 3.570121 / 01-01 00:00:03.569][0] [LGE-CC] lge_monitor_batt_temp_work : chg_wake_locked
1808[ 3.570132 / 01-01 00:00:03.569][0] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 50 / voltage : 4004
1809[ 3.570140 / 01-01 00:00:03.569][0] lge_power_changed_work
1810[ 3.570155 / 01-01 00:00:03.569][0] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
1811[ 3.570162 / 01-01 00:00:03.569][0] SMBCHG: lgcc_set_ibat_current: chg_current[3100]
1812[ 3.570171 / 01-01 00:00:03.569][0] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
1813[ 3.570178 / 01-01 00:00:03.569][0] SMBCHG: fcc: 5 voting for 3100 - on
1814[ 3.570183 / 01-01 00:00:03.569][0] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
1815[ 3.570190 / 01-01 00:00:03.569][0] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
1816[ 3.570196 / 01-01 00:00:03.569][0] SMBCHG: battchg_suspend: 2 voting for 0 - off
1817[ 4.860208 / 01-01 00:00:04.859][3] FG: update_battery_type: battery_id : 187
1818[ 4.860223 / 01-01 00:00:04.859][3] of_batterydata_get_best_profile: LGE_BL44E1F_LGC_3200mAh found
1819[ 4.866036 / 01-01 00:00:04.859][3] FG: fg_set_minfreq: Set minfreq enable
1820[ 4.866087 / 01-01 00:00:04.859][3] FG: fg_batt_profile_init: vbat_est_diff = 1373, v_current_pred: 4005866, v:4004493
1821[ 4.868997 / 01-01 00:00:04.859][3] FG: fg_set_minfreq: Set minfreq disable
1822[ 4.869005 / 01-01 00:00:04.859][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[0], val[0]
1823[ 4.869011 / 01-01 00:00:04.859][3] SMBCHG: battchg_suspend: 0 voting for 0 - off
1824[ 4.869017 / 01-01 00:00:04.859][3] SMBCHG: charging_suspend_vote_cb: client[0], suspend[0], last_client[0], last_suspend[0]
1825[ 4.875043 / 01-01 00:00:04.869][3] FG: fg_batt_profile_init: soc:[77], voltage:[4004493], ocv:[4053626], current:[324552], batt_temp:[302],cycle_count : [0], residence : [125000]
1826[ 4.875229 / 01-01 00:00:04.869][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1827[ 4.875234 / 01-01 00:00:04.869][3] SMBCHG: battchg_suspend: votes unchanged; skipping
1828[ 4.875294 / 01-01 00:00:04.869][3] SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
1829[ 4.875301 / 01-01 00:00:04.869][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1830[ 4.875344 / 01-01 00:00:04.869][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1831[ 4.875349 / 01-01 00:00:04.869][3] SMBCHG: usb_icl: votes unchanged; skipping
1832[ 4.875354 / 01-01 00:00:04.869][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1833[ 4.875360 / 01-01 00:00:04.869][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1834[ 4.875648 / 01-01 00:00:04.869][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1835[ 4.886776 / 01-01 00:00:04.879][3] FG: update_sram_data: soc:[77], soc_raw[7309], voltage:[3974128], ocv:[4053626], current:[559536], batt_temp:[305], charge_raw [2337155 / 3167000]
1836[ 5.111856 / 01-01 00:00:05.109][3] anx7688-usbc 6-0028: request_firmware(analogix/mi1_eeprom_20_8b.img)
1837[ 5.170062 / 01-01 00:00:05.169][3] [anx7688_firmware] cable 8
1838[ 5.170070 / 01-01 00:00:05.169][3] anx7688-usbc 6-0028: fw version: 0x0(last version:0x208b)
1839[ 5.170077 / 01-01 00:00:05.169][3] anx7688-usbc 6-0028: enter firmware update
1840[ 5.792914 / 01-01 00:00:05.789][0] anx7688-usbc 6-0028: firmware update end (622 ms)
1841[ 9.130607 / 01-01 00:00:09.129][3] anx7688-usbc 6-0028: VID: 0xaaaa PID: 0x7688 HWREV: 0xac STDALN FW: 0x0
1842[ 9.134901 / 01-01 00:00:09.129][3] msm_hdmi_register_slimport: sucess
1843[ 9.134992 / 01-01 00:00:09.129][3] [anx7688_dp] init_anx7688_dp: init anx7688 dp block
1844[ 9.135283 / 01-01 00:00:09.129][3] dual_role_usb otg_default: driver failed to report `mode' property: -22
1845[ 9.135307 / 01-01 00:00:09.129][3] dual_role_usb otg_default: driver failed to report `mode' property: -22
1846[ 9.135631 / 01-01 00:00:09.129][3] bus probe : 1612 anx7688-usbc 7522
1847[ 9.136763 / 01-01 00:00:09.129][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1848[ 9.136771 / 01-01 00:00:09.129][3] SMBCHG: battchg_suspend: votes unchanged; skipping
1849[ 9.136799 / 01-01 00:00:09.129][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1850[ 9.136841 / 01-01 00:00:09.129][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1851[ 9.136847 / 01-01 00:00:09.129][3] SMBCHG: usb_icl: votes unchanged; skipping
1852[ 9.136852 / 01-01 00:00:09.129][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
1853[ 9.136858 / 01-01 00:00:09.129][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1854[ 9.136903 / 01-01 00:00:09.129][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
1855[ 9.139450 / 01-01 00:00:09.129][2] Loading compiled-in X.509 certificates
1856[ 9.140273 / 01-01 00:00:09.139][2] Loaded X.509 cert 'Magrathea: Glacier signing key: 2b4779bfaa42be4b3332b4ce067ee6de7fb4995e'
1857[ 9.141114 / 01-01 00:00:09.139][2] Key type encrypted registered
1858[ 9.187489 / 01-01 00:00:09.179][0] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1859[ 9.188522 / 01-01 00:00:09.179][0] power_sysfs_parse_dt : Total sysfs node is 57
1860[ 9.188542 / 01-01 00:00:09.179][0] power_sysfs_parse_dt : xo_therm path is mandatory
1861[ 9.188551 / 01-01 00:00:09.179][0] power_sysfs_parse_dt : batt_therm path is mandatory
1862[ 9.188594 / 01-01 00:00:09.179][0] power_sysfs_parse_dt : health path is mandatory
1863[ 9.188617 / 01-01 00:00:09.179][0] power_sysfs_parse_dt : status path is mandatory
1864[ 9.189118 / 01-01 00:00:09.179][0] power_sysfs_make_path : pa_therm0 user node didn't have kernel node
1865[ 9.189156 / 01-01 00:00:09.179][0] power_sysfs_make_path : ac_online user node didn't have kernel node
1866[ 9.189167 / 01-01 00:00:09.179][0] power_sysfs_make_path : wlc_online user node didn't have kernel node
1867[ 9.189184 / 01-01 00:00:09.179][0] power_sysfs_make_path : iusb_control user node didn't have kernel node
1868[ 9.189192 / 01-01 00:00:09.179][0] power_sysfs_make_path : wlc_thermal_mitigation user node didn't have kernel node
1869[ 9.189221 / 01-01 00:00:09.179][0] power_sysfs_make_path : speed_bin user node didn't have kernel node
1870[ 9.189228 / 01-01 00:00:09.179][0] power_sysfs_make_path : pvs_bin user node didn't have kernel node
1871[ 9.189255 / 01-01 00:00:09.179][0] power_sysfs_probe : Success Power sysfs Init
1872[ 9.189559 / 01-01 00:00:09.179][0] lge_boost_bypass_init : start
1873[ 9.190398 / 01-01 00:00:09.189][1] lge_boost_bypass_probe : probe
1874[ 9.190418 / 01-01 00:00:09.189][1] lge_boost_bypass_parse_dt : name = pmi8994_boostbypass / volt = 3600000/3400000
1875[ 9.190470 / 01-01 00:00:09.189][1] lge_boost_bypass_regulator_setup : regulator exist
1876[ 9.190477 / 01-01 00:00:09.189][1] lge_boost_bypass_regulator_setup : vote boost bypass set to on
1877[ 9.190622 / 01-01 00:00:09.189][2] lge_boost_bypass_probe : success
1878[ 9.191528 / 01-01 00:00:09.189][0] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1879[ 9.191620 / 01-01 00:00:09.189][0] adsprpc: channel link type: 0
1880[ 9.207192 / 01-01 00:00:09.199][0] RNDIS_IPA module is loaded.
1881[ 9.207640 / 01-01 00:00:09.199][0] android_usb 66bf0c8.android_usb: device tree enabled
1882[ 9.207875 / 01-01 00:00:09.199][0] usb_gadget_probe_driver
1883[ 9.207888 / 01-01 00:00:09.199][0] gadget name udc->gadget->name dwc3-gadget
1884[ 9.207896 / 01-01 00:00:09.199][0]
1885[ 9.207896 / 01-01 00:00:09.199][0] ********************************************
1886[ 9.207901 / 01-01 00:00:09.199][0]
1887[ 9.207901 / 01-01 00:00:09.199][0] No of UDCs: 1
1888[ 9.207911 / 01-01 00:00:09.199][0] driver->function: android_usb
1889[ 9.207915 / 01-01 00:00:09.199][0]
1890[ 9.207915 / 01-01 00:00:09.199][0] ********************************************
1891[ 9.207925 / 01-01 00:00:09.199][0] udc->gadget->usb_core_id : 0
1892[ 9.207929 / 01-01 00:00:09.199][0]
1893[ 9.207929 / 01-01 00:00:09.199][0] driver->usb_core_id: 0
1894[ 9.208003 / 01-01 00:00:09.199][0] file system registered
1895[ 9.208052 / 01-01 00:00:09.199][0] mbim_init: initialize 1 instances
1896[ 9.208106 / 01-01 00:00:09.199][0] mbim_init: Initialized 1 ports
1897[ 9.209241 / 01-01 00:00:09.199][0] rndis_qc_init: initialize rndis QC instance
1898[ 9.209461 / 01-01 00:00:09.199][0] Number of LUNs=8
1899[ 9.209476 / 01-01 00:00:09.199][0] Mass Storage Function, version: 2009/09/11
1900[ 9.209485 / 01-01 00:00:09.199][0] LUN: removable file: (no medium)
1901[ 9.209505 / 01-01 00:00:09.199][0] Number of LUNs=1
1902[ 9.209543 / 01-01 00:00:09.199][0] LUN: removable file: (no medium)
1903[ 9.209551 / 01-01 00:00:09.199][0] Number of LUNs=1
1904[ 9.209813 / 01-01 00:00:09.199][0] evp_setup: evp_setup:
1905[ 9.209827 / 01-01 00:00:09.199][0] evp_get_product_string: evp_get_product_string: evp convert string, maxV=07E, minV=03C, feature=08
1906[ 9.209835 / 01-01 00:00:09.199][0] evp_get_product_string: evp_get_product_string: strings_evp = Maxim EVP gr8rFiV8US07E03C08
1907[ 9.209847 / 01-01 00:00:09.199][0] android_usb gadget: android_usb ready
1908[ 9.209855 / 01-01 00:00:09.199][0] udc->gadget->name: dwc3-gadget
1909[ 9.212412 / 01-01 00:00:09.209][2] hallic_dev switch registration success
1910[ 9.212540 / 01-01 00:00:09.209][2] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
1911[ 9.213772 / 01-04 16:49:56.500][2] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 2016-01-04 16:49:56 UTC (1451926196)
1912[ 9.217254 / 01-04 16:49:56.500][2] power_supply_callback: BCL state of SoC is 1
1913[ 9.222129 / 01-04 16:49:56.500][2] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1914[ 9.222394 / 01-04 16:49:56.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1915[ 9.222620 / 01-04 16:49:56.500][2] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1916[ 9.222786 / 01-04 16:49:56.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1917[ 9.222997 / 01-04 16:49:56.500][2] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1918[ 9.223167 / 01-04 16:49:56.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1919[ 9.223377 / 01-04 16:49:56.500][2] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1920[ 9.223542 / 01-04 16:49:56.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1921[ 9.227812 / 01-04 16:49:56.500][0] vts_probe: vts: xo_therm is registered. chan=114, weight=500
1922[ 9.227831 / 01-04 16:49:56.500][0] vts_probe: vts: bd_therm_2 is registered. chan=116, weight=270
1923[ 9.227839 / 01-04 16:49:56.500][0] vts_probe: vts: Add 2 adc(s).
1924[ 9.227845 / 01-04 16:49:56.500][0] vts_probe: vts: probe done.
1925[ 9.227886 / 01-04 16:49:56.500][0] vts_probe: led_sensor: All of adc sensors are disabled.
1926[ 9.228066 / 01-04 16:49:56.500][1] vts_probe: led_sensor: Add 0 adc(s).
1927[ 9.228076 / 01-04 16:49:56.500][1] vts_probe: led_sensor: probe done.
1928[ 9.228521 / 01-04 16:49:56.500][1] gpio_keys_gpio_report_event: code(115) state(0)
1929[ 9.228537 / 01-04 16:49:56.500][1] gpio_keys_gpio_report_event: code(222) state(0)
1930[ 9.230606 / 01-04 16:49:56.509][1] parse_cpu_levels: idx 1 545
1931[ 9.230620 / 01-04 16:49:56.509][1] parse_cpu_levels: idx 2 6022
1932[ 9.230628 / 01-04 16:49:56.509][1] parse_cpu_levels: idx 2 11499
1933[ 9.230685 / 01-04 16:49:56.509][1] parse_cpu_levels: idx 1 545
1934[ 9.230692 / 01-04 16:49:56.509][1] parse_cpu_levels: idx 2 6022
1935[ 9.230699 / 01-04 16:49:56.509][1] parse_cpu_levels: idx 2 11499
1936[ 9.234719 / 01-04 16:49:56.509][1] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1937[ 9.237907 / 01-04 16:49:56.509][1] rmnet_ipa started initialization
1938[ 9.237924 / 01-04 16:49:56.509][1] IPA SSR support = True
1939[ 9.237932 / 01-04 16:49:56.509][1] IPA ipa-loaduC = True
1940[ 9.237939 / 01-04 16:49:56.509][1] IPA SG support = True
1941[ 9.239777 / 01-04 16:49:56.509][2] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1942[ 9.239791 / 01-04 16:49:56.509][2] ipa ipa2_uc_state_check:301 uC is not loaded
1943[ 9.240728 / 01-04 16:49:56.519][2] rmnet_ipa completed initialization
1944[ 9.247231 / 01-04 16:49:56.519][2] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1945[ 9.248119 / 01-04 16:49:56.519][2] usb_otg_vreg: disabling
1946[ 9.248209 / 01-04 16:49:56.519][2] wlan_en_vreg: disabling
1947[ 9.248215 / 01-04 16:49:56.519][2] gdsc_mmagic_bimc: disabling
1948[ 9.248256 / 01-04 16:49:56.519][2] kryo1-retention: disabling
1949[ 9.248262 / 01-04 16:49:56.519][2] kryo0-retention: disabling
1950[ 9.248267 / 01-04 16:49:56.519][2] gfx_mem_acc_corner: disabling
1951[ 9.248272 / 01-04 16:49:56.519][2] apcc_l3_mem_acc_corner: disabling
1952[ 9.248277 / 01-04 16:49:56.519][2] apc1_perfcl_mem_acc_corner: disabling
1953[ 9.248282 / 01-04 16:49:56.519][2] apc0_pwrcl_mem_acc_corner: disabling
1954[ 9.248292 / 01-04 16:49:56.519][2] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1955[ 9.248580 / 01-04 16:49:56.519][2] dhd_module_init in
1956[ 9.248840 / 01-04 16:49:56.519][2] found wifi platform device bcmdhd_wlan
1957[ 9.249321 / 01-04 16:49:56.519][2] Power-up adapter 'DHD generic adapter'
1958[ 9.249330 / 01-04 16:49:56.519][2] wifi_platform_set_power = 1
1959[ 9.249371 / 01-04 16:49:56.519][2] [BRCM]: gpio_direction_output(1011,1)! ret = 0
1960[ 9.254697 / 01-04 16:49:56.529][0] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
1961[ 9.258409 / 01-04 16:49:56.529][0] msm_pcie_enable: PCIe RC0 PHY is ready!
1962[ 9.268517 / 01-04 16:49:56.539][0] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
1963[ 9.303927 / 01-04 16:49:56.579][0] msm_pcie_enable: PCIe RC0 link initialized
1964[ 9.304072 / 01-04 16:49:56.579][0] PCI host bridge /soc/qcom,pcie@00600000 ranges:
1965[ 9.304086 / 01-04 16:49:56.579][0] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1966[ 9.304106 / 01-04 16:49:56.579][0] IO 0x0c200000..0x0c2fffff -> 0x0c200000
1967[ 9.304118 / 01-04 16:49:56.579][0] MEM 0x0c300000..0x0cffffff -> 0x0c300000
1968[ 9.314255 / 01-04 16:49:56.589][0] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1969[ 9.314268 / 01-04 16:49:56.589][0] pci_bus 0000:00: root bus resource [bus 00-ff]
1970[ 9.314279 / 01-04 16:49:56.589][0] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1971[ 9.314289 / 01-04 16:49:56.589][0] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
1972[ 9.314321 / 01-04 16:49:56.589][0] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
1973[ 9.314370 / 01-04 16:49:56.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1974[ 9.314381 / 01-04 16:49:56.589][0] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
1975[ 9.314412 / 01-04 16:49:56.589][0] pci 0000:00:00.0: IOMMU is currently not supported for PCI
1976[ 9.314455 / 01-04 16:49:56.589][0] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
1977[ 9.314496 / 01-04 16:49:56.589][0] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1978[ 9.314790 / 01-04 16:49:56.589][0] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1979[ 9.315056 / 01-04 16:49:56.589][0] pci 0000:01:00.0: [14e4:43e9] type 00 class 0x028000
1980[ 9.315221 / 01-04 16:49:56.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1981[ 9.315232 / 01-04 16:49:56.589][0] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
1982[ 9.315321 / 01-04 16:49:56.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x001c[4] is all FFs
1983[ 9.315330 / 01-04 16:49:56.589][0] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
1984[ 9.315463 / 01-04 16:49:56.589][0] pci 0000:01:00.0: IOMMU is currently not supported for PCI
1985[ 9.315680 / 01-04 16:49:56.589][0] pci 0000:01:00.0: supports D1 D2
1986[ 9.315688 / 01-04 16:49:56.589][0] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1987[ 9.315971 / 01-04 16:49:56.589][0] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
1988[ 9.316139 / 01-04 16:49:56.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1989[ 9.316157 / 01-04 16:49:56.589][0] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
1990[ 9.316168 / 01-04 16:49:56.589][0] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
1991[ 9.316192 / 01-04 16:49:56.589][0] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
1992[ 9.316370 / 01-04 16:49:56.589][0] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
1993[ 9.316467 / 01-04 16:49:56.589][0] pci 0000:00:00.0: PCI bridge to [bus 01]
1994[ 9.316500 / 01-04 16:49:56.589][0] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
1995[ 9.399386 / 01-04 16:49:56.669][2] bcm_wifi_set_power: wifi power successed to pull up
1996[ 9.399394 / 01-04 16:49:56.669][2] wifi_platform_bus_enumerate device present 1
1997[ 9.399401 / 01-04 16:49:56.669][2] msm_pcie_enumerate: PCIe: RC0 has already been enumerated.
1998[ 9.399406 / 01-04 16:49:56.669][2] [BRCM] Card detect done
1999[ 9.399444 / 01-04 16:49:56.669][2] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 43E9(good PCI location)
2000[ 9.399451 / 01-04 16:49:56.669][2] dhdpcie_init: found adapter info 'DHD generic adapter'
2001[ 9.399463 / 01-04 16:49:56.669][2] alloc static buf at ffffffc033e40000!
2002[ 9.399890 / 01-04 16:49:56.669][2] pcieh 0000:01:00.0: enabling device (0000 -> 0002)
2003[ 9.401329 / 01-04 16:49:56.679][2] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
2004[ 9.401337 / 01-04 16:49:56.679][2] request DHD_INFO size(25216) is bigger than static size(24576).
2005[ 9.401342 / 01-04 16:49:56.679][2] wifi_platform_prealloc: failed to alloc static mem section 7
2006[ 9.401350 / 01-04 16:49:56.679][2] wifi_platform_get_mac_addr
2007[ 9.401358 / 01-04 16:49:56.679][2] [bcm_wifi_get_mac_addr] Exiting. MyMac : 0 : 90 : 4c : 10 : a4 :19
2008[ 9.401432 / 01-04 16:49:56.679][2] CFG80211-INFO2) wl_setup_wiphy : Registering Vendor80211
2009[ 9.401715 / 01-04 16:49:56.679][0] wl_create_event_handler(): thread:wl_event_handler:1ac started
2010[ 9.401725 / 01-04 16:49:56.679][2] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc033b2ccf0
2011[ 9.401951 / 01-04 16:49:56.679][0] dhd_attach(): thread:dhd_watchdog_thread:1ad started
2012[ 9.401965 / 01-04 16:49:56.679][0] dhd_deferred_work_init: work queue initialized
2013[ 9.401973 / 01-04 16:49:56.679][0] DHD LOAD BALANCING Enabled
2014[ 9.402448 / 01-04 16:49:56.679][0] Dongle Host Driver, version 1.78.5 (r)
2015[ 9.402448 / 01-04 16:49:56.679][0] Compiled in drivers/net/wireless/bcmdhd on 3.18.31-LineageOS-g1e68e82
2016[ 9.402806 / 01-04 16:49:56.679][0] Register interface [wlan0] MAC: 00:90:4c:20:b9:87
2017[ 9.402806 / 01-04 16:49:56.679][0]
2018[ 9.402833 / 01-04 16:49:56.679][2] CFG80211-INFO2) wl_event_handler : was terminated
2019[ 9.402859 / 01-04 16:49:56.679][0] wl_destroy_event_handler(): thread:wl_event_handler:1ac terminated OK
2020[ 9.402869 / 01-04 16:49:56.679][0] dhd_wl_ioctl: returning as busstate=0
2021[ 9.402877 / 01-04 16:49:56.679][0] dhd_bus_devreset: == Power OFF ==
2022[ 9.402892 / 01-04 16:49:56.679][0] dhdpcie_oob_intr_unregister: irq is not registered
2023[ 9.413401 / 01-04 16:49:56.689][2] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
2024[ 9.414494 / 01-04 16:49:56.689][2] dhd_bus_devreset: WLAN OFF Done
2025[ 9.414501 / 01-04 16:49:56.689][2] wifi_platform_set_power = 0
2026[ 9.414537 / 01-04 16:49:56.689][2] [BRCM]: gpio_direction_output(1011,0)! ret = 0
2027[ 9.414542 / 01-04 16:49:56.689][2] bcm_wifi_set_power: wifi power successed to pull down
2028[ 9.414599 / 01-04 16:49:56.689][2] drv probe : 9249 bcmdhd_wlan 165
2029[ 9.414690 / 01-04 16:49:56.689][2] dhd_module_init out
2030[ 9.418169 / 01-04 16:49:56.689][1] clock_late_init: Removing enables held for handed-off clocks
2031[ 9.423564 / 01-04 16:49:56.699][2] ALSA device list:
2032[ 9.423576 / 01-04 16:49:56.699][2] No soundcards found.
2033[ 9.424002 / 01-04 16:49:56.699][2] Freeing unused kernel memory: 492K (ffffffc001394000 - ffffffc00140f000)
2034[ 9.424018 / 01-04 16:49:56.699][2] Freeing alternatives memory: 80K (ffffffc00140f000 - ffffffc001423000)
2035[ 9.424024 / 01-04 16:49:56.699][2] [CCAudit] Run init process for OS startup
2036[ 9.424897 / 01-04 16:49:56.699][2] init: init first stage started!
2037[ 9.426773 / 01-04 16:49:56.699][2] SELinux: 2048 avtab hash slots, 14189 rules.
2038[ 9.429380 / 01-04 16:49:56.699][2] SELinux: 2048 avtab hash slots, 14189 rules.
2039[ 9.429401 / 01-04 16:49:56.699][2] SELinux: 1 users, 2 roles, 1180 types, 0 bools, 1 sens, 1024 cats
2040[ 9.429407 / 01-04 16:49:56.699][2] SELinux: 63 classes, 14189 rules
2041[ 9.430192 / 01-04 16:49:56.709][2] SELinux: Class can_socket not defined in policy.
2042[ 9.430209 / 01-04 16:49:56.709][2] SELinux: the above unknown classes and permissions will be denied
2043[ 9.430232 / 01-04 16:49:56.709][2] SELinux: Completing initialization.
2044[ 9.430236 / 01-04 16:49:56.709][2] SELinux: Setting up existing superblocks.
2045[ 9.430247 / 01-04 16:49:56.709][2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
2046[ 9.430268 / 01-04 16:49:56.709][2] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
2047[ 9.430325 / 01-04 16:49:56.709][2] SELinux: initialized (dev bdev, type bdev), not configured for labeling
2048[ 9.430337 / 01-04 16:49:56.709][2] SELinux: initialized (dev proc, type proc), uses genfs_contexts
2049[ 9.430354 / 01-04 16:49:56.709][2] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
2050[ 9.458846 / 01-04 16:49:56.729][2] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
2051[ 9.458861 / 01-04 16:49:56.729][2] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
2052[ 9.458870 / 01-04 16:49:56.729][2] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
2053[ 9.458878 / 01-04 16:49:56.729][2] SELinux: initialized (dev aio, type aio), not configured for labeling
2054[ 9.458886 / 01-04 16:49:56.729][2] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
2055[ 9.458903 / 01-04 16:49:56.729][2] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
2056[ 9.458961 / 01-04 16:49:56.729][2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
2057[ 9.458978 / 01-04 16:49:56.729][2] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
2058[ 9.492993 / 01-04 16:49:56.769][2] audit: type=1403 audit(1451926196.769:2): policy loaded auid=4294967295 ses=4294967295
2059[ 9.493463 / 01-04 16:49:56.769][2] audit: type=1404 audit(1451926196.769:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
2060[ 9.540426 / 01-04 16:49:56.819][2] init: (Initializing SELinux enforcing took 0.12s.)
2061[ 9.542941 / 01-04 16:49:56.819][2] init: init second stage started!
2062[ 9.547987 / 01-04 16:49:56.819][2] init: Running restorecon...
2063[ 9.712287 / 01-04 16:49:56.989][2] init: waitpid failed: No child processes
2064[ 9.712483 / 01-04 16:49:56.989][2] init: (Loading properties from /default.prop took 0.00s.)
2065[ 9.713652 / 01-04 16:49:56.989][2] init: (Parsing /init.environ.rc took 0.00s.)
2066[ 9.713868 / 01-04 16:49:56.989][2] init: (Parsing /init.usb.rc took 0.00s.)
2067[ 9.714741 / 01-04 16:49:56.989][2] init: /init.qcom.rc: 670: user requires 1 argument
2068[ 9.715357 / 01-04 16:49:56.989][2] init: (Parsing init.qcom.usb.rc took 0.00s.)
2069[ 9.715595 / 01-04 16:49:56.989][2] init: (Parsing init.qcom.power.rc took 0.00s.)
2070[ 9.715750 / 01-04 16:49:56.989][2] init: ignored duplicate definition of service 'perfd'init: ignored duplicate definition of service 'energy-awareness'init: (Parsing init.target.rc took 0.00s.)
2071[ 9.715853 / 01-04 16:49:56.989][2] init: (Parsing /init.qcom.rc took 0.00s.)
2072[ 9.716206 / 01-04 16:49:56.989][2] init: (Parsing /init.usb.configfs.rc took 0.00s.)
2073[ 9.716267 / 01-04 16:49:56.989][2] init: (Parsing /init.zygote64_32.rc took 0.00s.)
2074[ 9.716570 / 01-04 16:49:56.989][2] init: (Parsing /init.cm.rc took 0.00s.)
2075[ 9.716583 / 01-04 16:49:56.989][2] init: (Parsing /init.rc took 0.00s.)
2076[ 9.716915 / 01-04 16:49:56.989][2] init: Starting service 'ueventd'...
2077[ 9.717792 / 01-04 16:49:56.989][2] init: Waiting for /dev/.coldboot_done...
2078[ 9.719138 / 01-04 16:49:56.989][0] ueventd: ueventd started!
2079[ 9.762369 / 01-04 16:49:57.039][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2080[ 10.280079 / 01-04 16:49:57.559][1] pet_watchdog [enable : 1, jiffies : 4294938324, delay_time : 1000]
2081[ 12.737911 / 01-04 16:50:00.009][2] ueventd: Coldboot took 3.02s.
2082[ 12.740838 / 01-04 16:50:00.019][0] init: Waiting for /dev/.coldboot_done took 3.02s.
2083[ 12.741568 / 01-04 16:50:00.019][0] keychord: using input dev qpnp_pon for fevent
2084[ 12.741583 / 01-04 16:50:00.019][0] keychord: using input dev gpio-keys for fevent
2085[ 12.742446 / 01-04 16:50:00.019][0] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
2086[ 12.743611 / 01-04 16:50:00.019][0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
2087[ 12.743820 / 01-04 16:50:00.019][0] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
2088[ 12.746124 / 01-04 16:50:00.019][0] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
2089[ 12.746168 / 01-04 16:50:00.019][0] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
2090[ 12.747177 / 01-04 16:50:00.019][0] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
2091[ 12.750643 / 01-04 16:50:00.029][2] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
2092[ 12.750821 / 01-04 16:50:00.029][2] Registered swp emulation handler
2093[ 12.751667 / 01-04 16:50:00.029][2] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
2094[ 12.752827 / 01-04 16:50:00.029][2] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
2095[ 12.753449 / 01-04 16:50:00.029][3] fs_mgr: Warning: unknown flag fileencryption
2096[ 12.761107 / 01-04 16:50:00.039][3] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts: barrier=1
2097[ 12.761132 / 01-04 16:50:00.039][3] SELinux: initialized (dev sda18, type ext4), uses xattr
2098[ 12.761205 / 01-04 16:50:00.039][3] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
2099[ 12.763701 / 01-04 16:50:00.039][3] [CCAudit] do_sys_open error=-30 file=/etc/blkid.tab flag=131649 proc=init parent=init
2100[ 12.763748 / 01-04 16:50:00.039][3] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cache,/cache,ext4)=-1: No such file or directory
2101[ 12.764115 / 01-04 16:50:00.039][3] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache
2102[ 12.799963 / 01-04 16:50:00.069][2] random: e2fsck urandom read with 116 bits of entropy available
2103[ 12.847641 / 01-04 16:50:00.119][0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
2104[ 12.847641 / 01-04 16:50:00.119][0]
2105[ 12.847681 / 01-04 16:50:00.119][0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
2106[ 12.847681 / 01-04 16:50:00.119][0]
2107[ 12.847697 / 01-04 16:50:00.119][0] e2fsck: Pass 2: Checking directory structure
2108[ 12.847697 / 01-04 16:50:00.119][0]
2109[ 12.847711 / 01-04 16:50:00.119][0] e2fsck: Pass 3: Checking directory connectivity
2110[ 12.847711 / 01-04 16:50:00.119][0]
2111[ 12.847725 / 01-04 16:50:00.119][0] e2fsck: Pass 4: Checking reference counts
2112[ 12.847725 / 01-04 16:50:00.119][0]
2113[ 12.847739 / 01-04 16:50:00.119][0] e2fsck: Pass 5: Checking group summary information
2114[ 12.847739 / 01-04 16:50:00.119][0]
2115[ 12.847753 / 01-04 16:50:00.119][0] e2fsck: /dev/block/bootdevice/by-name/cache: 25/78880 files (4.0% non-contiguous), 10451/315392 blocks
2116[ 12.847753 / 01-04 16:50:00.119][0]
2117[ 12.849454 / 01-04 16:50:00.119][0] EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts: discard,barrier=1,noauto_da_alloc,errors=continue
2118[ 12.849484 / 01-04 16:50:00.119][0] SELinux: initialized (dev sda19, type ext4), uses xattr
2119[ 12.849553 / 01-04 16:50:00.119][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=0
2120[ 12.880670 / 01-04 16:50:00.159][0] [CCAudit] do_sys_open error=-30 file=/etc/blkid.tab flag=131649 proc=init parent=init
2121[ 12.910256 / 01-04 16:50:00.189][0] EXT4-fs (sda20): Ignoring removed nomblk_io_submit option
2122[ 12.912924 / 01-04 16:50:00.189][0] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
2123[ 12.912956 / 01-04 16:50:00.189][0] SELinux: initialized (dev sda20, type ext4), uses xattr
2124[ 12.913030 / 01-04 16:50:00.189][0] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
2125[ 12.914136 / 01-04 16:50:00.189][3] fs_mgr: check_fs(): unmount(/data) succeeded
2126[ 12.914167 / 01-04 16:50:00.189][3] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
2127[ 13.182530 / 01-04 16:50:00.459][0] random: nonblocking pool is initialized
2128[ 13.971464 / 01-04 16:50:01.249][0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
2129[ 13.971464 / 01-04 16:50:01.249][0]
2130[ 13.971502 / 01-04 16:50:01.249][0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
2131[ 13.971502 / 01-04 16:50:01.249][0]
2132[ 13.971519 / 01-04 16:50:01.249][0] e2fsck: Pass 2: Checking directory structure
2133[ 13.971519 / 01-04 16:50:01.249][0]
2134[ 13.971534 / 01-04 16:50:01.249][0] e2fsck: Pass 3: Checking directory connectivity
2135[ 13.971534 / 01-04 16:50:01.249][0]
2136[ 13.971548 / 01-04 16:50:01.249][0] e2fsck: Pass 4: Checking reference counts
2137[ 13.971548 / 01-04 16:50:01.249][0]
2138[ 13.971563 / 01-04 16:50:01.249][0] e2fsck: Pass 5: Checking group summary information
2139[ 13.971563 / 01-04 16:50:01.249][0]
2140[ 13.971578 / 01-04 16:50:01.249][0] e2fsck: /dev/block/bootdevice/by-name/userdata: 23425/3424256 files (3.5% non-contiguous), 11937947/13694976 blocks
2141[ 13.971578 / 01-04 16:50:01.249][0]
2142[ 13.976314 / 01-04 16:50:01.249][0] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts: discard,barrier=1,noauto_da_alloc,errors=continue
2143[ 13.976345 / 01-04 16:50:01.249][0] SELinux: initialized (dev sda20, type ext4), uses xattr
2144[ 13.976414 / 01-04 16:50:01.249][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
2145[ 13.977770 / 01-04 16:50:01.249][0] EXT4-fs (sda16): warning: maximal mount count reached, running e2fsck is recommended
2146[ 13.978006 / 01-04 16:50:01.249][0] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
2147[ 13.978031 / 01-04 16:50:01.249][0] SELinux: initialized (dev sda16, type ext4), uses xattr
2148[ 13.978081 / 01-04 16:50:01.249][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
2149[ 13.979329 / 01-04 16:50:01.249][0] SELinux: initialized (dev sde18, type vfat), uses mountpoint labeling
2150[ 13.979368 / 01-04 16:50:01.249][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem,target=/firmware,type=vfat)=0
2151[ 13.980706 / 01-04 16:50:01.259][0] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
2152[ 13.980950 / 01-04 16:50:01.259][0] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
2153[ 13.980974 / 01-04 16:50:01.259][0] SELinux: initialized (dev sda4, type ext4), uses xattr
2154[ 13.981026 / 01-04 16:50:01.259][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/sns,target=/sns,type=ext4)=0
2155[ 13.982588 / 01-04 16:50:01.259][0] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
2156[ 13.982822 / 01-04 16:50:01.259][0] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
2157[ 13.982845 / 01-04 16:50:01.259][0] SELinux: initialized (dev sda3, type ext4), uses xattr
2158[ 13.982894 / 01-04 16:50:01.259][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/drm,target=/persist-lg,type=ext4)=0
2159[ 13.984282 / 01-04 16:50:01.259][0] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
2160[ 13.984526 / 01-04 16:50:01.259][0] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
2161[ 13.984549 / 01-04 16:50:01.259][0] SELinux: initialized (dev sda2, type ext4), uses xattr
2162[ 13.984573 / 01-04 16:50:01.259][0] SELinux: Context u:object_r:mpt_file:s0 is not valid (left unmapped).
2163[ 13.984615 / 01-04 16:50:01.259][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/mpt,target=/mpt,type=ext4)=0
2164[ 13.986395 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
2165[ 13.986779 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
2166[ 13.987069 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
2167[ 13.987421 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
2168[ 13.987799 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
2169[ 13.988089 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
2170[ 13.988383 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
2171[ 13.988692 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
2172[ 13.989092 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
2173[ 13.989391 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
2174[ 13.989705 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
2175[ 13.990019 / 01-04 16:50:01.259][0] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
2176[ 13.990418 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
2177[ 13.990722 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
2178[ 13.991155 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
2179[ 13.991500 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
2180[ 13.991827 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
2181[ 13.992106 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
2182[ 13.992389 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
2183[ 13.992676 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
2184[ 13.993023 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
2185[ 13.993316 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
2186[ 13.993599 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
2187[ 13.993877 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
2188[ 13.994215 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
2189[ 13.994533 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
2190[ 13.994863 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
2191[ 13.995158 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
2192[ 13.995505 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
2193[ 13.995792 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
2194[ 13.996088 / 01-04 16:50:01.269][0] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
2195[ 13.996768 / 01-04 16:50:01.269][0] fs_mgr: Warning: unknown flag fileencryption
2196[ 13.999105 / 01-04 16:50:01.269][0] audit: type=1400 audit(1451926201.269:4): avc: denied { write } for pid=1 comm="init" name="tracing_on" dev="debugfs" ino=2391 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
2197[ 13.999127 / 01-04 16:50:01.269][0] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/tracing_on flag=688193 proc=init parent=swapper/0
2198[ 13.999148 / 01-04 16:50:01.269][0] init: write_file: Unable to open '/sys/kernel/debug/tracing/tracing_on': Permission denied
2199[ 14.000145 / 01-04 16:50:01.279][0] init: Starting service 'logd'...
2200[ 14.035736 / 01-04 16:50:01.309][0] logd.auditd: start
2201[ 14.035789 / 01-04 16:50:01.309][0] logd.klogd: 14035759786
2202[ 14.140067 / 01-04 16:50:01.419][3] anx7688-usbc 6-0028: anx7688_ctype_work: Unknown Charger, 0mV, 0mA
2203[ 14.141466 / 01-04 16:50:01.419][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2204[ 14.141474 / 01-04 16:50:01.419][3] SMBCHG: battchg_suspend: votes unchanged; skipping
2205[ 14.141503 / 01-04 16:50:01.419][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2206[ 14.141547 / 01-04 16:50:01.419][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
2207[ 14.141553 / 01-04 16:50:01.419][3] SMBCHG: usb_icl: votes unchanged; skipping
2208[ 14.141559 / 01-04 16:50:01.419][3] SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
2209[ 14.141566 / 01-04 16:50:01.419][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2210[ 14.141639 / 01-04 16:50:01.419][3] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
2211[ 14.252386 / 01-04 16:50:01.529][2] [QFUSE]sec_read_store start
2212[ 14.252402 / 01-04 16:50:01.529][2] [QFUSE]qfprom_secdat_read start
2213[ 14.252804 / 01-04 16:50:01.529][2] [QFUSE]qfprom_secdat_read end
2214[ 14.252813 / 01-04 16:50:01.529][2] [QFUSE]sec_read_store end
2215[ 14.253343 / 01-04 16:50:01.529][2] init: property_set("ro.qc.sdk.audio.fluencetype", "fluence") failed
2216[ 14.253871 / 01-04 16:50:01.529][2] init: (Loading properties from /system/build.prop took 0.00s.)
2217[ 14.253914 / 01-04 16:50:01.529][2] init: (Loading properties from /vendor/build.prop took 0.00s.)
2218[ 14.253936 / 01-04 16:50:01.529][2] init: (Loading properties from /factory/factory.prop took 0.00s.)
2219[ 14.254056 / 01-04 16:50:01.529][2] fs_mgr: Warning: unknown flag fileencryption
2220[ 14.254934 / 01-04 16:50:01.529][2] init: Starting service 'debuggerd'...
2221[ 14.255413 / 01-04 16:50:01.529][2] init: Starting service 'debuggerd64'...
2222[ 14.256212 / 01-04 16:50:01.529][2] init: Starting service 'vold'...
2223[ 14.257587 / 01-04 16:50:01.529][2] init: Not bootcharting.
2224[ 14.460976 / 01-04 16:50:01.739][3] fs_mgr: Warning: unknown flag fileencryption
2225[ 14.750967 / 01-04 16:50:02.029][0] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
2226[ 14.788976 / 01-04 16:50:02.059][2] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 469) exited with status 0
2227[ 14.793085 / 01-04 16:50:02.069][3] [CCAudit] chmod_common error=-30 file=camera flag=0 proc=init parent=swapper/0
2228[ 14.808847 / 01-04 16:50:02.079][3] init: decode_uid: Unable to find UID for 'lgdrm'. Returning UINT_MAX
2229[ 14.808869 / 01-04 16:50:02.079][3] init: decode_uid: Unable to find UID for 'lgdrm_acc'. Returning UINT_MAX
2230[ 14.809321 / 01-04 16:50:02.079][3] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
2231[ 14.809642 / 01-04 16:50:02.079][3] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
2232[ 14.809757 / 01-04 16:50:02.079][3] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
2233[ 14.809869 / 01-04 16:50:02.079][3] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
2234[ 14.811183 / 01-04 16:50:02.089][3] init: decode_uid: Unable to find UID for 'divxdrm'. Returning UINT_MAX
2235[ 14.811347 / 01-04 16:50:02.089][3] init: decode_uid: Unable to find UID for 'lgmms'. Returning UINT_MAX
2236[ 14.811946 / 01-04 16:50:02.089][3] init: cannot find '/system/bin/cpfirmware' (No such file or directory), disabling 'exec 2 (/system/bin/cpfirmware)'
2237[ 14.815919 / 01-04 16:50:02.089][3] init: Starting service 'sysinit'...
2238[ 14.816619 / 01-04 16:50:02.089][3] init: (Loading properties from /data/local.prop took 0.00s.)
2239[ 15.065116 / 01-04 16:50:02.339][1] init: Service 'sysinit' (pid 470) exited with status 0
2240[ 15.065363 / 01-04 16:50:02.339][1] init: Starting service 'logd-reinit'...
2241[ 15.065944 / 01-04 16:50:02.339][1] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
2242[ 15.066199 / 01-04 16:50:02.339][1] [CCAudit] do_sys_open error=-13 file=/sys/class/i2c-dev/i2c-6/device/6-0072/enable_irq flag=688193 proc=init parent=swapper/0
2243[ 15.066221 / 01-04 16:50:02.339][1] init: write_file: Unable to open '/sys/class/i2c-dev/i2c-6/device/6-0072/enable_irq': Permission denied
2244[ 15.066254 / 01-04 16:50:02.339][1] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
2245[ 15.066268 / 01-04 16:50:02.339][1] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
2246[ 15.066305 / 01-04 16:50:02.339][3] type=1400 audit(1451926202.339:5): avc: denied { write } for pid=1 comm="init" name="6-0072" dev="sysfs" ino=22438 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
2247[ 15.066314 / 01-04 16:50:02.339][1] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
2248[ 15.066322 / 01-04 16:50:02.339][1] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
2249[ 15.066344 / 01-04 16:50:02.339][1] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
2250[ 15.066359 / 01-04 16:50:02.339][1] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
2251[ 15.066381 / 01-04 16:50:02.339][1] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
2252[ 15.066397 / 01-04 16:50:02.339][1] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
2253[ 15.067959 / 01-04 16:50:02.339][0] subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090600000
2254[ 15.073569 / 01-04 16:50:02.349][2] logd.daemon: reinit
2255[ 15.085766 / 01-04 16:50:02.359][1] [Touch E] [sw49407_upgrade 2110] fail to request_firmware fwpath: touch/elsa/L1L57P1_1_07.img (ret:-11)
2256[ 15.085784 / 01-04 16:50:02.359][1] [Touch] There is no need to reset (ret: -11)
2257[ 15.085802 / 01-04 16:50:02.359][1] [Touch] NOTIFY_CONNECTION!
2258[ 15.085809 / 01-04 16:50:02.359][1] [Touch] TA Type: 1
2259[ 15.085817 / 01-04 16:50:02.359][1] [Touch] sw49407_connect: write charger_state = 0x01
2260[ 15.086574 / 01-04 16:50:02.359][1] [Touch] touch_ic_init Start
2261[ 15.086591 / 01-04 16:50:02.359][1] [Touch] sw49407_init: charger_state = 0x01
2262[ 15.086728 / 01-04 16:50:02.359][1] [Touch] info ptr addr read : 0026425C
2263[ 15.086864 / 01-04 16:50:02.359][1] [Touch] tc status read : 0F5200E7
2264[ 15.086872 / 01-04 16:50:02.359][1] [Touch] ========== Info ADDR ==========
2265[ 15.086879 / 01-04 16:50:02.359][1] [Touch] chip_info_addr : 025C
2266[ 15.086885 / 01-04 16:50:02.359][1] [Touch] reg_info_addr : 0264
2267[ 15.086892 / 01-04 16:50:02.359][1] [Touch] ========== Info ADDR ==========
2268[ 15.086898 / 01-04 16:50:02.359][1] [Touch] Model ID is loaded
2269[ 15.086905 / 01-04 16:50:02.359][1] [Touch] Production Test info checksum is ok
2270[ 15.087958 / 01-04 16:50:02.359][1] [Touch] ==Print PT info Data==
2271[ 15.087978 / 01-04 16:50:02.359][1] [Touch] version : v1.07, chip : 9, protocol : 4
2272[ 15.087978 / 01-04 16:50:02.359][1] [Touch]
2273[ 15.087978 / 01-04 16:50:02.359][1] [Touch] fpc : 2, lcm : 4, lot : 9
2274[ 15.087978 / 01-04 16:50:02.359][1] [Touch] product id : L1L57P1
2275[ 15.087978 / 01-04 16:50:02.359][1] [Touch] flash boot : idle, done, crc : ok
2276[ 15.088000 / 01-04 16:50:02.359][1] [Touch] ==Print Config Header Data==
2277[ 15.088010 / 01-04 16:50:02.359][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
2278[ 15.088675 / 01-04 16:50:02.359][1] [Touch] resume ts->lpwg.screen on
2279[ 15.088787 / 01-04 16:50:02.359][1] [Touch] sw49407_lpwg_control mode = 0
2280[ 15.088900 / 01-04 16:50:02.359][1] [Touch] swipe disable
2281[ 15.088908 / 01-04 16:50:02.359][1] [Touch] sw49407_tc_driving = 3, 185
2282[ 15.089024 / 01-04 16:50:02.359][1] [Touch] DDI Display Mode = 3
2283[ 15.089252 / 01-04 16:50:02.359][1] [Touch] Reset Cnt : 28
2284[ 15.110235 / 01-04 16:50:02.389][1] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
2285[ 15.110256 / 01-04 16:50:02.389][1] [Touch] Remove pending irq(389)
2286[ 15.110282 / 01-04 16:50:02.389][1] [Touch] touch_ic_init End
2287[ 15.171590 / 01-04 16:50:02.449][2] subsys-pil-tz 9300000.qcom,lpass: adsp: adsp.mdt starting auth and reset
2288[ 15.342617 / 01-04 16:50:02.619][3] subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
2289[ 15.361790 / 01-04 16:50:02.639][1] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
2290[ 15.364472 / 01-04 16:50:02.639][2] subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
2291[ 15.364505 / 01-04 16:50:02.639][0] subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
2292[ 15.364527 / 01-04 16:50:02.639][2] L-Notify: Generel: 7
2293[ 15.364707 / 01-04 16:50:02.639][2] init: Service 'logd-reinit' (pid 484) exited with status 0
2294[ 15.364794 / 01-04 16:50:02.639][2] sysmon_send_event_no_qmi: Message sending failed -19
2295[ 15.364850 / 01-04 16:50:02.639][3] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
2296[ 15.368118 / 01-04 16:50:02.639][2] subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090600000 to 0x0000000091000000
2297[ 15.375245 / 01-04 16:50:02.649][0] apr_tal:Q6 Is Up
2298[ 15.435277 / 01-04 16:50:02.709][1] subsys-pil-tz 1c00000.qcom,ssc: slpi: slpi.mdt starting auth and reset
2299[ 15.459659 / 01-04 16:50:02.729][0] sps:BAM 0x0000000009184000 (va:0xffffff8004780000) enabled: ver:0x19, number of pipes:31
2300[ 15.459677 / 01-04 16:50:02.739][1] sps:BAM 0x0000000009184000 is registered.
2301[ 15.461048 / 01-04 16:50:02.739][1] slimbus sb-1: of_slim: invalid E-addr
2302[ 15.461273 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Platform data from device tree
2303[ 15.461356 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
2304[ 15.461381 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
2305[ 15.461404 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
2306[ 15.461427 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
2307[ 15.461451 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
2308[ 15.461463 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
2309[ 15.461474 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
2310[ 15.461486 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
2311[ 15.461498 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
2312[ 15.461512 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
2313[ 15.461523 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
2314[ 15.461533 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
2315[ 15.461544 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
2316[ 15.461588 / 01-04 16:50:02.739][1] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
2317[ 15.502175 / 01-04 16:50:02.779][3] subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
2318[ 15.520221 / 01-04 16:50:02.799][1] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
2319[ 15.520258 / 01-04 16:50:02.799][1] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
2320[ 15.520650 / 01-04 16:50:02.799][0] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
2321[ 15.520923 / 01-04 16:50:02.799][0] wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
2322[ 15.521591 / 01-04 16:50:02.799][0] wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
2323[ 15.521609 / 01-04 16:50:02.799][0] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
2324[ 15.529858 / 01-04 16:50:02.799][1] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 1
2325[ 15.536670 / 01-04 16:50:02.809][0] tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
2326[ 15.536811 / 01-04 16:50:02.809][0] drv probe : 15461 wcd9335-slim 75
2327[ 15.538728 / 01-04 16:50:02.809][1] msm8996-asoc-snd soc:sound-9335: msm8996_init_wsa_dev: found 1 wsa881x devices registered with ALSA core
2328[ 15.539833 / 01-04 16:50:02.809][1] tasha_codec tasha_codec: tasha_codec_probe()
2329[ 15.551092 / 01-04 16:50:02.829][1] wcd_mbhc_init: missing lge,msm-mbhc-extn-cable in dt node
2330[ 15.552951 / 01-04 16:50:02.829][1] tasha_codec tasha_codec: for cpe segments only will be dumped.
2331[ 15.555568 / 01-04 16:50:02.829][0] subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
2332[ 15.555619 / 01-04 16:50:02.829][2] subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
2333[ 15.555924 / 01-04 16:50:02.829][2] sysmon_send_event_no_qmi: Message sending failed -19
2334[ 15.555939 / 01-04 16:50:02.829][2] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
2335[ 15.557117 / 01-04 16:50:02.829][3] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
2336[ 15.557199 / 01-04 16:50:02.829][3] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
2337[ 15.557588 / 01-04 16:50:02.829][2] init: Starting service 'healthd'...
2338[ 15.558214 / 01-04 16:50:02.829][2] init: Starting service 'conn_init'...
2339[ 15.558658 / 01-04 16:50:02.829][2] init: Starting service 'qcom-c_core-sh'...
2340[ 15.559188 / 01-04 16:50:02.829][2] init: Starting service 'irsc_util'...
2341[ 15.559838 / 01-04 16:50:02.829][2] init: Starting service 'rmt_storage'...
2342[ 15.560761 / 01-04 16:50:02.839][2] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
2343[ 15.560924 / 01-04 16:50:02.839][2] init: Starting service 'sensor-sh'...
2344[ 15.561259 / 01-04 16:50:02.839][2] init: Starting service 'lge-usb-sh'...
2345[ 15.562036 / 01-04 16:50:02.839][2] init: Starting service 'per_mgr'...
2346[ 15.563557 / 01-04 16:50:02.839][2] init: Starting service 'qseecomd'...
2347[ 15.564824 / 01-04 16:50:02.839][2] init: Starting service 'lmkd'...
2348[ 15.566014 / 01-04 16:50:02.839][2] init: Starting service 'servicemanager'...
2349[ 15.570022 / 01-04 16:50:02.839][2] msm8996-asoc-snd soc:sound-9335: control 2:0:0:CPE AFE MAD Enable:0 is already present
2350[ 15.571845 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_1_TX --> SLIM_1_TX --> MultiMedia3 Mixer
2351[ 15.571860 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_1_TX -> SLIM_1_TX -> MultiMedia3 Mixer
2352[ 15.571878 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_3_TX --> SLIM_3_TX --> MultiMedia3 Mixer
2353[ 15.571884 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_3_TX -> SLIM_3_TX -> MultiMedia3 Mixer
2354[ 15.571902 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_4_TX --> SLIM_4_TX --> MultiMedia3 Mixer
2355[ 15.571909 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_4_TX -> SLIM_4_TX -> MultiMedia3 Mixer
2356[ 15.571923 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SLIMBUS_6_TX --> SLIM_6_TX --> MultiMedia3 Mixer
2357[ 15.571930 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SLIMBUS_6_TX -> SLIM_6_TX -> MultiMedia3 Mixer
2358[ 15.577563 / 01-04 16:50:02.849][3] init: cannot setexeccon('u:r:lge-usb-sh:s0'): Invalid argument
2359[ 15.578110 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX
2360[ 15.578125 / 01-04 16:50:02.849][2] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3
2361[ 15.581270 / 01-04 16:50:02.859][2] init: Starting service 'surfaceflinger'...
2362[ 15.581816 / 01-04 16:50:02.859][2] init: Service 'qcom-c_core-sh' (pid 520) exited with status 127
2363[ 15.581913 / 01-04 16:50:02.859][2] init: Service 'irsc_util' (pid 521) exited with status 0
2364[ 15.581969 / 01-04 16:50:02.859][2] init: Service 'lge-usb-sh' (pid 524) exited with status 127
2365[ 15.583319 / 01-04 16:50:02.859][2] [CCAudit] chmod_common error=-30 file=ip flag=0 proc=init parent=swapper/0
2366[ 15.583525 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
2367[ 15.583550 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
2368[ 15.583574 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
2369[ 15.583597 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
2370[ 15.583622 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
2371[ 15.583647 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
2372[ 15.583670 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
2373[ 15.583695 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
2374[ 15.583723 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
2375[ 15.583749 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
2376[ 15.583773 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
2377[ 15.583797 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
2378[ 15.583821 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
2379[ 15.583846 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
2380[ 15.583870 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
2381[ 15.583893 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
2382[ 15.583916 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
2383[ 15.583938 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
2384[ 15.583961 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
2385[ 15.583984 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
2386[ 15.587302 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/sys/devices/virtual/lg_rgb_led/use_patterns/setting': No such file or directory
2387[ 15.587593 / 01-04 16:50:02.859][2] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
2388[ 15.587650 / 01-04 16:50:02.859][2] init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
2389[ 15.588598 / 01-04 16:50:02.859][2] init: SELinux: Could not get canonical path for /sys/block/mmcblk0/queue/scheduler restorecon: No such file or directory.
2390[ 15.589090 / 01-04 16:50:02.859][2] init: SELinux: Could not get canonical path for /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
2391[ 15.590444 / 01-04 16:50:02.869][2] init: Starting service 'console'...
2392[ 15.591019 / 01-04 16:50:02.869][2] init: Starting service 'lge-usb-vzw-sh'...
2393[ 15.591440 / 01-04 16:50:02.869][2] android_usb android0: gadget enable(0)
2394[ 15.591459 / 01-04 16:50:02.869][2] enable_store: android_usb: already disabled
2395[ 15.591696 / 01-04 16:50:02.869][2] android_usb android0: LGE-USB request function list: mtp,adb:mtp,acm,diag,adb
2396[ 15.591738 / 01-04 16:50:02.869][2] android_usb android0: gadget enable(1)
2397[ 15.591746 / 01-04 16:50:02.869][2] ffs_function_enable: ffs_function_enable: config->opened(0)
2398[ 15.591752 / 01-04 16:50:02.869][2] android_disable: android_disable: checked disable_depth(1)
2399[ 15.591758 / 01-04 16:50:02.869][2] android_enable: android_enable: checked disable_depth(2)
2400[ 15.591792 / 01-04 16:50:02.869][2] init: Starting service 'adbd'...
2401[ 15.592386 / 01-04 16:50:02.869][2] init: Starting service 'per_proxy'...
2402[ 15.593028 / 01-04 16:50:02.869][2] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
2403[ 15.593270 / 01-04 16:50:02.869][2] init: Starting service 'cnd'...
2404[ 15.593792 / 01-04 16:50:02.869][2] init: Starting service 'imsqmidaemon'...
2405[ 15.594297 / 01-04 16:50:02.869][2] init: Starting service 'tftp_server'...
2406[ 15.594671 / 01-04 16:50:02.869][2] init: cannot find '/system/bin/port-bridge' (No such file or directory), disabling 'port-bridge'
2407[ 15.594704 / 01-04 16:50:02.869][2] init: cannot find '/system/bin/qmuxd' (No such file or directory), disabling 'qmuxd'
2408[ 15.594906 / 01-04 16:50:02.869][2] init: Starting service 'netmgrd'...
2409[ 15.595421 / 01-04 16:50:02.869][2] init: Starting service 'ipacm-diag'...
2410[ 15.595965 / 01-04 16:50:02.869][2] init: Starting service 'ipacm'...
2411[ 15.610378 / 01-04 16:50:02.889][2] init: Starting service 'qti'...
2412[ 15.610997 / 01-04 16:50:02.889][2] init: Starting service 'energy-awareness'...
2413[ 15.611560 / 01-04 16:50:02.889][2] init: Starting service 'thermal-engine'...
2414[ 15.612131 / 01-04 16:50:02.889][2] init: Starting service 'adsprpcd'...
2415[ 15.612669 / 01-04 16:50:02.889][2] init: Starting service 'zygote'...
2416[ 15.613149 / 01-04 16:50:02.889][2] init: Starting service 'zygote_secondary'...
2417[ 15.613661 / 01-04 16:50:02.889][0] read descriptors
2418[ 15.613685 / 01-04 16:50:02.889][0] read strings
2419[ 15.613709 / 01-04 16:50:02.889][0] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc033b0c800)
2420[ 15.613716 / 01-04 16:50:02.889][2] init: Starting service 'audioserver'...
2421[ 15.613728 / 01-04 16:50:02.889][0] android_enable: android_enable: checked disable_depth(1)
2422[ 15.613740 / 01-04 16:50:02.889][0] mtp_bind_config
2423[ 15.613825 / 01-04 16:50:02.889][0] mtp_bind_config
2424[ 15.614225 / 01-04 16:50:02.889][2] init: Starting service 'cameraserver'...
2425[ 15.614796 / 01-04 16:50:02.889][2] init: Starting service 'drm'...
2426[ 15.615338 / 01-04 16:50:02.889][2] init: Starting service 'installd'...
2427[ 15.615933 / 01-04 16:50:02.889][2] init: Starting service 'keystore'...
2428[ 15.616477 / 01-04 16:50:02.889][2] init: Starting service 'mediacodec'...
2429[ 15.616844 / 01-04 16:50:02.889][0] dwc3_gadget_run_stop Queue DCP check work! 0
2430[ 15.617049 / 01-04 16:50:02.889][2] init: Starting service 'mediadrm'...
2431[ 15.617609 / 01-04 16:50:02.889][2] init: Starting service 'mediaextractor'...
2432[ 15.618208 / 01-04 16:50:02.889][2] init: Starting service 'media'...
2433[ 15.618747 / 01-04 16:50:02.889][2] init: Starting service 'netd'...
2434[ 15.650831 / 01-04 16:50:02.929][2] init: couldn't write 560 to /dev/cpuset/camera-daemon/tasks: No such file or directory
2435[ 15.710899 / 01-04 16:50:02.989][2] init: Starting service 'ril-daemon'...
2436[ 15.711553 / 01-04 16:50:02.989][2] init: Service 'conn_init' (pid 519) exited with status 0
2437[ 15.711709 / 01-04 16:50:02.989][2] init: Service 'lge-usb-vzw-sh' (pid 539) exited with status 127
2438[ 15.712199 / 01-04 16:50:02.989][2] init: Starting service 'dpmd'...
2439[ 15.712731 / 01-04 16:50:02.989][2] init: Starting service 'qcom-sh'...
2440[ 15.713264 / 01-04 16:50:02.989][2] init: Starting service 'loc_launcher'...
2441[ 15.713880 / 01-04 16:50:02.989][2] init: Starting service 'qseeproxydaemon'...
2442[ 15.714483 / 01-04 16:50:02.989][2] init: Starting service 'fpc_early_loader'...
2443[ 15.715125 / 01-04 16:50:02.989][2] init: Starting service 'qcamerasvr'...
2444[ 15.715658 / 01-04 16:50:02.989][2] init: Starting service 'fingerprintd'...
2445[ 15.716053 / 01-04 16:50:02.989][2] init: cannot find '/system/bin/qfp-daemon' (No such file or directory), disabling 'qfp-daemon'
2446[ 15.716082 / 01-04 16:50:02.989][2] init: cannot find '/system/bin/qvop-daemon' (No such file or directory), disabling 'qvop-daemon'
2447[ 15.716332 / 01-04 16:50:02.989][2] init: Starting service 'time_daemon'...
2448[ 15.716894 / 01-04 16:50:02.989][2] init: Starting service 'audiod'...
2449[ 15.717263 / 01-04 16:50:02.989][2] init: cannot find '/system/bin/tloc_daemon' (No such file or directory), disabling 'tlocd'
2450[ 15.717292 / 01-04 16:50:02.989][2] init: cannot find '/system/vendor/bin/mdtp_service' (No such file or directory), disabling 'mdtp_service'
2451[ 15.717516 / 01-04 16:50:02.989][2] init: Starting service 'gatekeeperd'...
2452[ 15.743771 / 01-04 16:50:03.019][2] 'opened /dev/adsprpc-smd c 218 0'
2453[ 15.839690 / 01-04 16:50:03.109][3] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
2454[ 15.842599 / 01-04 16:50:03.119][3] IPA received MPSS BEFORE_POWERUP
2455[ 15.842805 / 01-04 16:50:03.119][3] ipa ipa2_uc_state_check:301 uC is not loaded
2456[ 15.842829 / 01-04 16:50:03.119][3] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
2457[ 15.844591 / 01-04 16:50:03.119][3] IPA BEFORE_POWERUP handling is complete
2458[ 15.844610 / 01-04 16:50:03.129][3] modem is powering up
2459[ 15.856673 / 01-04 16:50:03.129][3] capability: warning: `loc_launcher' uses 32-bit capabilities (legacy support in use)
2460[ 15.861279 / 01-04 16:50:03.139][0] init: Starting service 'perfprofd'...
2461[ 15.884563 / 01-04 16:50:03.159][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2462[ 15.897042 / 01-04 16:50:03.169][3] pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088000000 to 0x000000008e900000
2463[ 15.900359 / 01-04 16:50:03.179][3] pil-q6v5-mss 2080000.qcom,mss: pil : mss reset and load mba
2464[ 15.933037 / 01-04 16:50:03.209][2] msm_thermal:interrupt_mode_init interrupt mode init !
2465[ 15.933095 / 01-04 16:50:03.209][2] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
2466[ 15.933102 / 01-04 16:50:03.209][2] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
2467[ 15.933109 / 01-04 16:50:03.209][2] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
2468[ 15.933114 / 01-04 16:50:03.209][2] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
2469[ 15.933149 / 01-04 16:50:03.209][2] msm_thermal:update_cpu_freq [CPU0] : max freq = 4294967295
2470[ 15.933168 / 01-04 16:50:03.209][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
2471[ 15.940218 / 01-04 16:50:03.219][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2472[ 15.943986 / 01-04 16:50:03.219][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2473[ 15.956537 / 01-04 16:50:03.229][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2474[ 15.992557 / 01-27 01:06:16.802][3] pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
2475[ 15.995129 / 01-27 01:06:16.802][3] pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f6f00000 to 0x00000000f7000000 size 100000
2476[ 16.023425 / 01-27 01:06:16.831][2] msm_thermal:set_enabled enabled = 0
2477[ 16.032069 / 01-27 01:06:16.841][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2478[ 16.032818 / 01-27 01:06:16.841][0] WIN/LINUX ACM bInterfaceClass change to fs:2
2479[ 16.033022 / 01-27 01:06:16.841][0] WIN/LINUX ACM bInterfaceClass change to fs:2
2480[ 16.034874 / 01-27 01:06:16.841][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2481[ 16.035026 / 01-27 01:06:16.841][0] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2482[ 16.035141 / 01-27 01:06:16.841][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2483[ 16.038220 / 01-27 01:06:16.841][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2484[ 16.038237 / 01-27 01:06:16.841][0] SMBCHG: battchg_suspend: votes unchanged; skipping
2485[ 16.038264 / 01-27 01:06:16.841][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2486[ 16.038313 / 01-27 01:06:16.841][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2487[ 16.038321 / 01-27 01:06:16.841][0] SMBCHG: usb_icl: 0 voting for 500 - on
2488[ 16.038328 / 01-27 01:06:16.841][0] SMBCHG: usb_icl: vote_min min_vote=500, client_index=0
2489[ 16.038333 / 01-27 01:06:16.841][0] SMBCHG: usb_icl: effective vote is now 500 voted by 0
2490[ 16.038340 / 01-27 01:06:16.841][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
2491[ 16.038350 / 01-27 01:06:16.841][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
2492[ 16.038358 / 01-27 01:06:16.841][0] SMBCHG: usb_suspend: 2 voting for 0 - off
2493[ 16.038536 / 01-27 01:06:16.841][2] SMBCHG: power_ok_handler: triggered: 0x01
2494[ 16.038562 / 01-27 01:06:16.841][0] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
2495[ 16.038587 / 01-27 01:06:16.841][0] SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
2496[ 16.038600 / 01-27 01:06:16.841][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2497[ 16.038644 / 01-27 01:06:16.841][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2498[ 16.057662 / 01-27 01:06:16.861][0] kgsl: _read_fw2_block_header: GPMU unknown header ID 6
2499[ 16.061793 / 01-27 01:06:16.871][0] cpr3_regulator_measure_aging: gfx: average quotient delta=16 (count=10)
2500[ 16.061988 / 01-27 01:06:16.871][0] cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=677 uV
2501[ 16.072909 / 01-27 01:06:16.881][1] healthd: BatteryFullChargePath not found
2502[ 16.072938 / 01-27 01:06:16.881][1] healthd: BatteryCycleCountPath not found
2503[ 16.090130 / 01-27 01:06:16.901][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2504[ 16.100445 / 01-27 01:06:16.911][3] pil-q6v5-mss 2080000.qcom,mss: MBA boot done
2505[ 16.100484 / 01-27 01:06:16.911][3] pil-q6v5-mss 2080000.qcom,mss: pil : msa auth modem.mdt.
2506[ 16.142730 / 01-27 01:06:16.951][3] SMBCHG: fastchg_handler: p2f triggered
2507[ 16.142802 / 01-27 01:06:16.951][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2508[ 16.170796 / 01-27 01:06:16.981][0] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: loading from 0x0000000091000000 to 0x0000000091002000
2509[ 16.190634 / 01-27 01:06:17.001][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2510[ 16.190653 / 01-27 01:06:17.001][0] SMBCHG: battchg_suspend: votes unchanged; skipping
2511[ 16.190682 / 01-27 01:06:17.001][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2512[ 16.190731 / 01-27 01:06:17.001][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2513[ 16.190739 / 01-27 01:06:17.001][0] SMBCHG: usb_icl: votes unchanged; skipping
2514[ 16.190746 / 01-27 01:06:17.001][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
2515[ 16.226232 / 01-27 01:06:17.031][0] init: Starting service 'lge-usb-vzw-sh'...
2516[ 16.227009 / 01-27 01:06:17.031][0] init: Service 'sensor-sh' (pid 523) exited with status 0
2517[ 16.232692 / 01-27 01:06:17.041][3] FG: update_sram_data: soc:[77], soc_raw[7302], voltage:[3795906], ocv:[4053626], current:[1892841], batt_temp:[301], charge_raw [2334866 / 3167000]
2518[ 16.239965 / 01-27 01:06:17.041][0] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: a530_zap.mdt starting auth and reset
2519[ 16.245699 / 01-27 01:06:17.051][0] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: Brought out of reset
2520[ 16.250682 / 01-27 01:06:17.061][3] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
2521[ 16.254410 / 01-27 01:06:17.061][0] [CCAudit] do_sys_open error=-13 file=/proc/self/task/756/comm flag=655361 proc=surfaceflinger parent=init
2522[ 16.254692 / 01-27 01:06:17.061][0] [CCAudit] do_sys_open error=-13 file=/proc/self/task/758/comm flag=655361 proc=surfaceflinger parent=init
2523[ 16.283768 / 01-27 01:06:17.091][0] mdss_fb_blank_sub: [Display] mdss_fb_open+0x138/0x1cc mode:0
2524[ 16.308347 / 01-27 01:06:17.111][0] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2525[ 16.308460 / 01-27 01:06:17.111][0] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=surfaceflinger parent=init
2526[ 16.309182 / 01-27 01:06:17.111][0] hdmi_tx_sysfs_wta_hpd: 0
2527[ 16.309199 / 01-27 01:06:17.111][0] hdmi_tx_sysfs_wta_hpd: HPD is already off
2528[ 16.309783 / 01-27 01:06:17.111][0] hdmi_tx_sysfs_wta_hpd: 1
2529[ 16.309841 / 01-27 01:06:17.111][0] hdmi_tx_sysfs_wta_hpd: DS registered, HPD on not allowed
2530[ 16.450462 / 01-27 01:06:17.261][0] android_usb android0: gadget enable(0)
2531[ 16.450483 / 01-27 01:06:17.261][0] android_disable: android_disable: checked disable_depth(0)
2532[ 16.450498 / 01-27 01:06:17.261][0] dwc3 6a00000.dwc3: request ffffffc033a8bd00 was not queued to ep0out
2533[ 16.451387 / 01-27 01:06:17.261][0] ffs_function_disable: ffs_function_disable: config->opened(1)
2534[ 16.451698 / 01-27 01:06:17.261][0] init: Service 'qcom-sh' (pid 579) exited with status 0
2535[ 16.451923 / 01-27 01:06:17.261][0] init: Service 'lge-usb-vzw-sh' (pid 748) exited with status 127
2536[ 16.452589 / 01-27 01:06:17.261][0] init: Starting service 'sensors'...
2537[ 16.460248 / 01-27 01:06:17.271][0] android_usb android0: LGE-USB request function list: mtp,adb:mtp,acm,diag,adb
2538[ 16.460309 / 01-27 01:06:17.271][0] android_usb android0: gadget enable(1)
2539[ 16.460321 / 01-27 01:06:17.271][0] ffs_function_enable: ffs_function_enable: config->opened(1)
2540[ 16.460329 / 01-27 01:06:17.271][0] android_enable: android_enable: checked disable_depth(1)
2541[ 16.460336 / 01-27 01:06:17.271][0] mtp_bind_config
2542[ 16.460421 / 01-27 01:06:17.271][0] mtp_bind_config
2543[ 16.501500 / 01-27 01:06:17.311][0] dwc3_gadget_run_stop Queue DCP check work! 0
2544[ 16.540331 / 01-27 01:06:17.351][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2545[ 16.540376 / 01-27 01:06:17.351][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2546[ 16.540384 / 01-27 01:06:17.351][0] SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
2547[ 16.546168 / 01-27 01:06:17.351][0] init: Starting service 'imsdatadaemon'...
2548[ 16.590011 / 01-27 01:06:17.391][1] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
2549[ 16.601323 / 01-27 01:06:17.411][0] init: Service 'energy-awareness' (pid 553) exited with status 0
2550[ 16.606490 / 01-27 01:06:17.411][0] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
2551[ 16.680754 / 01-27 01:06:17.491][1] [CCAudit] do_sys_open error=-13 file=/sys/power/wake_lock flag=655362 proc=ApmTone parent=init
2552[ 16.711976 / 01-27 01:06:17.521][0] init: Starting service 'bootanim'...
2553[ 16.714319 / 01-27 01:06:17.521][0] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xd4/0xe4 mode:0
2554[ 16.714338 / 01-27 01:06:17.521][0] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2555[ 16.714342 / 01-27 01:06:17.521][0] [Touch] FB_UNBLANK
2556[ 16.824954 / 01-27 01:06:17.631][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2557[ 16.840434 / 01-27 01:06:17.651][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2558[ 16.887436 / 01-27 01:06:17.691][3] [CCAudit] do_sys_open error=-13 file=/system/rfs/msm/adsp/readwrite/server_check.txt.rfs_tmp flag=131649 proc=tftp_server parent=init
2559[ 16.896120 / 01-27 01:06:17.701][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2560[ 16.899987 / 01-27 01:06:17.701][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2561[ 16.912425 / 01-27 01:06:17.721][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2562[ 16.923160 / 01-27 01:06:17.731][1] es9218_codec_probe(): entry
2563[ 16.923174 / 01-27 01:06:17.731][1] es9218_codec_probe(): exit
2564[ 16.949262 / 01-27 01:06:17.751][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
2565[ 16.949284 / 01-27 01:06:17.751][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
2566[ 16.949367 / 01-27 01:06:17.751][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
2567[ 16.949378 / 01-27 01:06:17.751][1] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
2568[ 16.958781 / 01-27 01:06:17.761][3] [CCAudit] do_sys_open error=-13 file=/system/rfs/msm/adsp/readwrite/server_check.txt.rfs_tmp flag=131649 proc=tftp_server parent=init
2569[ 16.978504 / 01-27 01:06:17.781][3] QSEECOM: qseecom_load_app: App (fpctzapp) does'nt exist, loading apps for first time
2570[ 16.988063 / 01-27 01:06:17.791][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2571[ 16.988513 / 01-27 01:06:17.791][0] WIN/LINUX ACM bInterfaceClass change to fs:2
2572[ 16.988617 / 01-27 01:06:17.791][0] WIN/LINUX ACM bInterfaceClass change to fs:2
2573[ 16.989561 / 01-27 01:06:17.791][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2574[ 17.025491 / 01-27 01:06:17.831][1] msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
2575[ 17.040190 / 01-27 01:06:17.851][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2576[ 17.050150 / 01-27 01:06:17.861][0] SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
2577[ 17.050193 / 01-27 01:06:17.861][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
2578[ 17.057584 / 01-27 01:06:17.861][1] wsa881x wsa881x.21170213: wsa881x_init: WSA881X_IS_2_0
2579[ 17.173452 / 01-27 01:06:17.981][1] input: msm8996-tasha-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input3
2580[ 17.173799 / 01-27 01:06:17.981][1] input: msm8996-tasha-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input4
2581[ 17.173961 / 01-27 01:06:17.981][1] keychord: using input dev msm8996-tasha-snd-card Button Jack for fevent
2582[ 17.175394 / 01-27 01:06:17.981][1] msm8996-pinctrl 1010000.pinctrl: not freeing pin 68 (GPIO_68) as part of deactivating group gpio68 - it is already used for some other setting
2583[ 17.175521 / 01-27 01:06:17.981][1] msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-snd-card registered
2584[ 17.175534 / 01-27 01:06:17.981][1] msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335
2585[ 17.175542 / 01-27 01:06:17.981][1] drv probe : 15536 msm8996-asoc-snd 1638
2586[ 17.554956 / 01-27 01:06:18.371][2] msm_pm_qos_add_request: add request
2587[ 17.560190 / 01-27 01:06:18.371][2] camera id 0 Slave addr 0x34 addr_type 2
2588[ 17.560210 / 01-27 01:06:18.371][2] sensor_id_reg_addr 0x16 sensor_id 0x298 sensor id mask 0
2589[ 17.560216 / 01-27 01:06:18.371][2] power up size 6 power down size 6
2590[ 17.560224 / 01-27 01:06:18.371][2] position 0
2591[ 17.560229 / 01-27 01:06:18.371][2] mount 90s_ctrl[0] 0000000000000000
2592[ 17.560241 / 01-27 01:06:18.371][2] msm_sensor_get_power_up_settings: forcing imx298_lgit_power_up
2593[ 17.560251 / 01-27 01:06:18.371][2] UP seq_type 1 seq_val 8 config_val 0 delay 1
2594[ 17.560258 / 01-27 01:06:18.371][2] UP seq_type 1 seq_val 4 config_val 2 delay 0
2595[ 17.560265 / 01-27 01:06:18.371][2] UP seq_type 2 seq_val 0 config_val 0 delay 0
2596[ 17.560273 / 01-27 01:06:18.371][2] UP seq_type 2 seq_val 1 config_val 0 delay 0
2597[ 17.560279 / 01-27 01:06:18.371][2] UP seq_type 2 seq_val 4 config_val 0 delay 0
2598[ 17.560285 / 01-27 01:06:18.371][2] UP seq_type 2 seq_val 5 config_val 0 delay 0
2599[ 17.560291 / 01-27 01:06:18.371][2] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
2600[ 17.560297 / 01-27 01:06:18.371][2] UP seq_type 1 seq_val 7 config_val 2 delay 1
2601[ 17.560303 / 01-27 01:06:18.371][2] UP seq_type 1 seq_val 0 config_val 2 delay 1
2602[ 17.560309 / 01-27 01:06:18.371][2] UP seq_type 1 seq_val 8 config_val 2 delay 21
2603[ 17.560315 / 01-27 01:06:18.371][2] msm_sensor_get_power_down_settings: forcing imx298_lgit_power_down
2604[ 17.560321 / 01-27 01:06:18.371][2] DOWN seq_type 0 seq_val 0 config_val 0 delay 1
2605[ 17.560326 / 01-27 01:06:18.371][2] DOWN seq_type 1 seq_val 8 config_val 0 delay 1
2606[ 17.560331 / 01-27 01:06:18.371][2] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
2607[ 17.560336 / 01-27 01:06:18.371][2] DOWN seq_type 2 seq_val 5 config_val 0 delay 0
2608[ 17.560342 / 01-27 01:06:18.371][2] DOWN seq_type 2 seq_val 4 config_val 0 delay 0
2609[ 17.560347 / 01-27 01:06:18.371][2] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
2610[ 17.560352 / 01-27 01:06:18.371][2] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
2611[ 17.560356 / 01-27 01:06:18.371][2] DOWN seq_type 1 seq_val 4 config_val 0 delay 0
2612[ 17.560361 / 01-27 01:06:18.371][2] DOWN seq_type 1 seq_val 7 config_val 0 delay 1
2613[ 17.560372 / 01-27 01:06:18.371][2] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
2614[ 17.560377 / 01-27 01:06:18.371][2] msm_camera_fill_vreg_params:196 i 5 j 5 cam_oisdvdd
2615[ 17.560383 / 01-27 01:06:18.371][2] msm_camera_fill_vreg_params:196 i 3 j 5 cam_oisdvdd
2616[ 17.560388 / 01-27 01:06:18.371][2] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
2617[ 17.560550 / 01-27 01:06:18.371][2] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for lc898123f40
2618[ 17.560558 / 01-27 01:06:18.371][2] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 0
2619[ 17.560584 / 01-27 01:06:18.371][2] msm_sensor_fill_actuator_subdevid_by_name qcom,actuator cell index 0, rc 0
2620[ 17.560591 / 01-27 01:06:18.371][2] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
2621[ 17.560614 / 01-27 01:06:18.371][2] msm_sensor_fill_proxy_subdevid_by_name qcom,proxy cell index 0, rc 0
2622[ 17.560621 / 01-27 01:06:18.371][2] msm_sensor_fill_iris_subdevid_by_name:567 src_node NULL
2623[ 17.610857 / 01-27 01:06:18.421][2] msm_cci_init:1399: hw_version = 0x10040000
2624[ 17.611141 / 01-27 01:06:18.421][0] msm_cci_irq:1755 MASTER_0 error 0x10000000
2625[ 17.611215 / 01-27 01:06:18.421][2] msm_cci_i2c_read:930 read_words = 0, exp words = 1
2626[ 17.611223 / 01-27 01:06:18.421][2] msm_cci_i2c_read_bytes:1013 failed rc -22
2627[ 17.611229 / 01-27 01:06:18.421][2] msm_camera_cci_i2c_read: line 45 rc = -22
2628[ 17.611235 / 01-27 01:06:18.421][2] msm_sensor_match_id: imx298_mitsumi: read id failed
2629[ 17.611241 / 01-27 01:06:18.421][2] msm_sensor_check_id:1432 match id failed rc -22
2630[ 17.624848 / 01-27 01:06:18.431][2] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=cameraserver parent=init
2631[ 17.701524 / 01-27 01:06:18.511][0] msm_cci_init:1399: hw_version = 0x10040000
2632[ 17.701772 / 01-27 01:06:18.511][0] msm_cci_irq:1755 MASTER_0 error 0x10000000
2633[ 17.701881 / 01-27 01:06:18.511][2] msm_cci_i2c_read:930 read_words = 0, exp words = 1
2634[ 17.701892 / 01-27 01:06:18.511][2] msm_cci_i2c_read_bytes:1013 failed rc -22
2635[ 17.701899 / 01-27 01:06:18.511][2] msm_camera_cci_i2c_read: line 45 rc = -22
2636[ 17.701906 / 01-27 01:06:18.511][2] msm_sensor_match_id: imx298_mitsumi: read id failed
2637[ 17.701912 / 01-27 01:06:18.511][2] msm_sensor_check_id:1432 match id failed rc -22
2638[ 17.783416 / 01-27 01:06:18.591][3] QSEECOM: qseecom_load_app: App with id 5 (fpctzapp) now loaded
2639[ 17.783621 / 01-27 01:06:18.591][2] pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received
2640[ 17.785623 / 01-27 01:06:18.591][2] M-Notify: General: 7
2641[ 17.791190 / 01-27 01:06:18.601][2] msm_cci_init:1399: hw_version = 0x10040000
2642[ 17.791390 / 01-27 01:06:18.601][0] msm_cci_irq:1755 MASTER_0 error 0x10000000
2643[ 17.791467 / 01-27 01:06:18.601][2] msm_cci_i2c_read:930 read_words = 0, exp words = 1
2644[ 17.791475 / 01-27 01:06:18.601][2] msm_cci_i2c_read_bytes:1013 failed rc -22
2645[ 17.791481 / 01-27 01:06:18.601][2] msm_camera_cci_i2c_read: line 45 rc = -22
2646[ 17.791486 / 01-27 01:06:18.601][2] msm_sensor_match_id: imx298_mitsumi: read id failed
2647[ 17.791492 / 01-27 01:06:18.601][2] msm_sensor_check_id:1432 match id failed rc -22
2648[ 17.805718 / 01-27 01:06:18.611][3] pil-q6v5-mss 2080000.qcom,mss: modem: modem.mdt starting auth and reset
2649[ 17.807676 / 01-27 01:06:18.611][3] pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset
2650[ 17.807724 / 01-27 01:06:18.611][3] pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up
2651[ 17.808986 / 01-27 01:06:18.611][2] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=BootAnimation parent=init
2652[ 17.810957 / 01-27 01:06:18.621][0] IPA received MPSS AFTER_POWERUP
2653[ 17.811017 / 01-27 01:06:18.621][0] IPA AFTER_POWERUP handling is complete
2654[ 17.830067 / 01-27 01:06:18.641][1] msm_sensor_power_up(205) imx298_mitsumi
2655[ 17.830079 / 01-27 01:06:18.641][1] imx298_mitsumi power up failed
2656[ 17.830092 / 01-27 01:06:18.641][1] MSM-SENSOR-INIT msm_sensor_driver_cmd:82 msm_sensor_driver_cmd failed (non-fatal) rc -22
2657[ 17.830102 / 01-27 01:06:18.641][1] MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:148 msm_sensor_init_subdev_do_ioctl:148 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
2658[ 17.846561 / 01-27 01:06:18.651][3] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
2659[ 17.849318 / 01-27 01:06:18.651][3] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
2660[ 17.849384 / 01-27 01:06:18.651][3] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
2661[ 17.849445 / 01-27 01:06:18.651][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2662[ 17.849452 / 01-27 01:06:18.651][3] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
2663[ 17.849510 / 01-27 01:06:18.651][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2664[ 17.849517 / 01-27 01:06:18.651][3] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
2665[ 17.849578 / 01-27 01:06:18.651][3] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
2666[ 17.849638 / 01-27 01:06:18.651][3] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
2667[ 17.849697 / 01-27 01:06:18.651][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2668[ 17.849703 / 01-27 01:06:18.651][3] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
2669[ 17.849761 / 01-27 01:06:18.651][3] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2670[ 17.849767 / 01-27 01:06:18.651][3] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
2671[ 17.849825 / 01-27 01:06:18.651][3] es9218_left_volume_get(): Left Volume= -0 db
2672[ 17.849881 / 01-27 01:06:18.651][3] es9218_right_volume_get(): Right Volume= -0 db
2673[ 17.849938 / 01-27 01:06:18.651][3] es9218_master_volume_get(): Master Volume= -0 db
2674[ 17.849992 / 01-27 01:06:18.651][3] es9218_filter_enum_get(): ucontrol = 8
2675[ 17.850108 / 01-27 01:06:18.661][3] es9218_power_state_get(): power state = 0
2676[ 17.850127 / 01-27 01:06:18.661][3] es9218_power_state_get(): ucontrol = 0
2677[ 17.850203 / 01-27 01:06:18.661][3] es9218_clk_divider_get() : invalid state = CLOSE
2678[ 17.850270 / 01-27 01:06:18.661][3] es9218_chip_state_get(): enter
2679[ 17.850300 / 01-27 01:06:18.661][3] es9218_power_gpio_H(): pa_gpio_level = 1
2680[ 17.851324 / 01-27 01:06:18.661][3] es9218_reset_gpio_H(): pa_gpio_level = 1
2681[ 17.852956 / 01-27 01:06:18.661][2] es9218_chip_state_get : i2_read success : 0
2682[ 17.852983 / 01-27 01:06:18.661][2] es9218_reset_gpio_L(): pa_gpio_level = 0
2683[ 17.852988 / 01-27 01:06:18.661][2] es9218_chip_state_get(): leave
2684[ 17.853174 / 01-27 01:06:18.661][2] es9218_avc_volume_get(): AVC Volume= -0 db
2685[ 17.853231 / 01-27 01:06:18.661][2] es9218_headset_type_get(): type = 0
2686[ 17.853303 / 01-27 01:06:18.661][2] es9218_dop_get() 0
2687[ 17.853360 / 01-27 01:06:18.661][2] es9218_auto_mute_get(): type = 0
2688[ 17.853446 / 01-27 01:06:18.661][2] es9218_sabre_wcdon2bypass_get(): power state = 0
2689[ 17.854323 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2690[ 17.854531 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2691[ 17.854735 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2692[ 17.854840 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2693[ 17.855252 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2694[ 17.855362 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2695[ 17.855670 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2696[ 17.855980 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2697[ 17.856038 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream or runtime not found
2698[ 17.856351 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2699[ 17.856463 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2700[ 17.856775 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2701[ 17.857085 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2702[ 17.857447 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2703[ 17.857765 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2704[ 17.858088 / 01-27 01:06:18.661][2] msm_compr_audio_effects_config_get: stream or effects inactive
2705[ 17.858512 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2706[ 17.859809 / 01-27 01:06:18.661][2] msm_pcm_volume_ctl_get substream runtime not found
2707[ 17.865017 / 01-27 01:06:18.671][2] msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 649, cpu_bit:8, offline:0, trip_type:5
2708[ 17.865028 / 01-27 01:06:18.671][2] msm_thermal:hotplug_notify 8 already onlined.
2709[ 17.884164 / 01-27 01:06:18.691][0] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
2710[ 17.948684 / 01-27 01:06:18.751][1] camera id 0 Slave addr 0x20 addr_type 2
2711[ 17.948705 / 01-27 01:06:18.751][1] sensor_id_reg_addr 0x16 sensor_id 0x298 sensor id mask 0
2712[ 17.948713 / 01-27 01:06:18.751][1] power up size 10 power down size 9
2713[ 17.948723 / 01-27 01:06:18.751][1] position 0
2714[ 17.948728 / 01-27 01:06:18.751][1] mount 90s_ctrl[0] 0000000000000000
2715[ 17.948745 / 01-27 01:06:18.751][1] msm_sensor_get_power_up_settings: forcing imx298_lgit_power_up
2716[ 17.948755 / 01-27 01:06:18.751][1] UP seq_type 1 seq_val 8 config_val 0 delay 1
2717[ 17.948765 / 01-27 01:06:18.751][1] UP seq_type 1 seq_val 4 config_val 2 delay 0
2718[ 17.948773 / 01-27 01:06:18.751][1] UP seq_type 2 seq_val 0 config_val 0 delay 0
2719[ 17.948780 / 01-27 01:06:18.751][1] UP seq_type 2 seq_val 1 config_val 0 delay 0
2720[ 17.948786 / 01-27 01:06:18.751][1] UP seq_type 2 seq_val 4 config_val 0 delay 0
2721[ 17.948793 / 01-27 01:06:18.751][1] UP seq_type 2 seq_val 5 config_val 0 delay 0
2722[ 17.948800 / 01-27 01:06:18.751][1] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
2723[ 17.948807 / 01-27 01:06:18.751][1] UP seq_type 1 seq_val 7 config_val 2 delay 1
2724[ 17.948813 / 01-27 01:06:18.751][1] UP seq_type 1 seq_val 0 config_val 2 delay 1
2725[ 17.948819 / 01-27 01:06:18.751][1] UP seq_type 1 seq_val 8 config_val 2 delay 21
2726[ 17.948826 / 01-27 01:06:18.751][1] msm_sensor_get_power_down_settings: forcing imx298_lgit_power_down
2727[ 17.948834 / 01-27 01:06:18.751][1] DOWN seq_type 0 seq_val 0 config_val 0 delay 1
2728[ 17.948841 / 01-27 01:06:18.751][1] DOWN seq_type 1 seq_val 8 config_val 0 delay 1
2729[ 17.948847 / 01-27 01:06:18.751][1] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
2730[ 17.948855 / 01-27 01:06:18.751][1] DOWN seq_type 2 seq_val 5 config_val 0 delay 0
2731[ 17.948861 / 01-27 01:06:18.751][1] DOWN seq_type 2 seq_val 4 config_val 0 delay 0
2732[ 17.948867 / 01-27 01:06:18.751][1] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
2733[ 17.948873 / 01-27 01:06:18.751][1] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
2734[ 17.948881 / 01-27 01:06:18.751][1] DOWN seq_type 1 seq_val 4 config_val 0 delay 0
2735[ 17.948887 / 01-27 01:06:18.751][1] DOWN seq_type 1 seq_val 7 config_val 0 delay 1
2736[ 17.948898 / 01-27 01:06:18.751][1] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
2737[ 17.948906 / 01-27 01:06:18.751][1] msm_camera_fill_vreg_params:196 i 5 j 5 cam_oisdvdd
2738[ 17.948913 / 01-27 01:06:18.751][1] msm_camera_fill_vreg_params:196 i 3 j 5 cam_oisdvdd
2739[ 17.948920 / 01-27 01:06:18.751][1] msm_camera_fill_vreg_params:185 i 4 j 4 cam_oisvdd
2740[ 17.949080 / 01-27 01:06:18.751][1] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for brcb032gwz
2741[ 17.949093 / 01-27 01:06:18.751][1] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 0
2742[ 17.949148 / 01-27 01:06:18.751][1] msm_sensor_fill_actuator_subdevid_by_name qcom,actuator cell index 0, rc 0
2743[ 17.949198 / 01-27 01:06:18.751][1] msm_sensor_fill_ois_subdevid_by_name qcom,ois cell index 0, rc 0
2744[ 17.949210 / 01-27 01:06:18.751][1] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
2745[ 17.949262 / 01-27 01:06:18.751][1] msm_sensor_fill_proxy_subdevid_by_name qcom,proxy cell index 0, rc 0
2746[ 17.964971 / 01-27 01:06:18.771][1] [Display] mdss_dsi_on-:
2747[ 17.969965 / 01-27 01:06:18.771][2] [LCD][LM3697] lm3697_set_main_current_level : backlight level=0, cal_value=0
2748[ 17.980063 / 01-27 01:06:18.791][3] lm3697_backlight_off
2749[ 18.000846 / 01-27 01:06:18.811][2] msm_cci_init:1399: hw_version = 0x10040000
2750[ 18.001170 / 01-27 01:06:18.811][2] msm_sensor_power_up(205) imx298_lgit
2751[ 18.001177 / 01-27 01:06:18.811][2] imx298_lgit probe succeeded
2752[ 18.001936 / 01-27 01:06:18.811][2] rc 0 session_id 2<6>[ 18.003091 / 01-27 01:06:18.811][2] msm_sensor_power_down(147) imx298_lgit
2753[ 18.013407 / 01-27 01:06:18.821][3] [CCAudit] do_sys_open error=-13 file=/system/rfs/msm/mpss/readwrite/server_check.txt.rfs_tmp flag=131649 proc=tftp_server parent=init
2754[ 18.019098 / 01-27 01:06:18.821][0] apr_tal:Modem Is Up
2755[ 18.021608 / 01-27 01:06:18.831][1] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
2756[ 18.044985 / 01-27 01:06:18.851][2] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
2757[ 18.045801 / 01-27 01:06:18.851][2] ipa-wan handle_indication_req:133 not send indication
2758[ 18.047080 / 01-27 01:06:18.851][3] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
2759[ 18.047349 / 01-27 01:06:18.851][2] ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
2760[ 18.047359 / 01-27 01:06:18.851][2] ipa ipa_uc_ntn_event_log_info_handler:39 NTN feature missing 0x9
2761[ 18.047369 / 01-27 01:06:18.851][2] ipa ipa_uc_response_hdlr:461 IPA uC loaded
2762[ 18.047396 / 01-27 01:06:18.851][2] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
2763[ 18.060873 / 01-27 01:06:18.871][1] camera id 1 Slave addr 0x40 addr_type 2
2764[ 18.060897 / 01-27 01:06:18.871][1] sensor_id_reg_addr 0xF16 sensor_id 0x553 sensor id mask 0
2765[ 18.060904 / 01-27 01:06:18.871][1] power up size 5 power down size 5
2766[ 18.060947 / 01-27 01:06:18.871][2] position 1
2767[ 18.060952 / 01-27 01:06:18.871][2] mount 270s_ctrl[1] 0000000000000000
2768[ 18.060964 / 01-27 01:06:18.871][2] msm_sensor_get_power_up_settings: forcing hi553_power_up
2769[ 18.060970 / 01-27 01:06:18.871][2] UP seq_type 2 seq_val 1 config_val 0 delay 0
2770[ 18.061008 / 01-27 01:06:18.871][2] UP seq_type 2 seq_val 2 config_val 0 delay 0
2771[ 18.061020 / 01-27 01:06:18.871][2] UP seq_type 2 seq_val 0 config_val 0 delay 0
2772[ 18.061029 / 01-27 01:06:18.871][2] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
2773[ 18.061034 / 01-27 01:06:18.871][2] UP seq_type 1 seq_val 0 config_val 2 delay 1
2774[ 18.061040 / 01-27 01:06:18.871][2] msm_sensor_get_power_down_settings: forcing hi553_power_down
2775[ 18.061062 / 01-27 01:06:18.871][2] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
2776[ 18.061067 / 01-27 01:06:18.871][2] DOWN seq_type 0 seq_val 0 config_val 0 delay 1
2777[ 18.061072 / 01-27 01:06:18.871][2] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
2778[ 18.061077 / 01-27 01:06:18.871][2] DOWN seq_type 2 seq_val 2 config_val 0 delay 0
2779[ 18.061082 / 01-27 01:06:18.871][2] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
2780[ 18.061802 / 01-27 01:06:18.871][2] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for m24c32_hi553
2781[ 18.061818 / 01-27 01:06:18.871][2] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 3
2782[ 18.061827 / 01-27 01:06:18.871][2] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
2783[ 18.061834 / 01-27 01:06:18.871][2] msm_sensor_fill_proxy_subdevid_by_name:520 src_node NULL
2784[ 18.068146 / 01-27 01:06:18.871][0] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x23 (ok)
2785[ 18.070176 / 01-27 01:06:18.881][3] msm_sensor_power_up(205) hi553
2786[ 18.070192 / 01-27 01:06:18.881][3] hi553 probe succeeded
2787[ 18.070201 / 01-27 01:06:18.881][3] msm_sensor_driver_create_i2c_v4l_subdev i2c_camera I2c probe succeeded
2788[ 18.070437 / 01-27 01:06:18.881][3] msm_sensor_driver_create_i2c_v4l_subdev rc 0 session_id 3
2789[ 18.070506 / 01-27 01:06:18.881][3] msm_sensor_driver_create_i2c_v4l_subdev:238
2790[ 18.070513 / 01-27 01:06:18.881][3] msm_sensor_power_down(147) hi553
2791[ 18.080807 / 01-27 01:06:18.891][2] camera id 2 Slave addr 0x34 addr_type 2
2792[ 18.080824 / 01-27 01:06:18.891][2] sensor_id_reg_addr 0x0 sensor_id 0x219 sensor id mask 0
2793[ 18.080830 / 01-27 01:06:18.891][2] power up size 5 power down size 5
2794[ 18.080837 / 01-27 01:06:18.891][2] position 0
2795[ 18.080841 / 01-27 01:06:18.891][2] mount 90s_ctrl[2] 0000000000000000
2796[ 18.080853 / 01-27 01:06:18.891][2] msm_sensor_get_power_up_settings: forcing imx219_power_up
2797[ 18.080861 / 01-27 01:06:18.891][2] UP seq_type 2 seq_val 0 config_val 0 delay 0
2798[ 18.080869 / 01-27 01:06:18.891][2] UP seq_type 1 seq_val 4 config_val 2 delay 0
2799[ 18.080875 / 01-27 01:06:18.891][2] UP seq_type 2 seq_val 1 config_val 0 delay 0
2800[ 18.080882 / 01-27 01:06:18.891][2] UP seq_type 0 seq_val 0 config_val 24000000 delay 1
2801[ 18.080889 / 01-27 01:06:18.891][2] UP seq_type 1 seq_val 0 config_val 2 delay 1
2802[ 18.080894 / 01-27 01:06:18.891][2] msm_sensor_get_power_down_settings: forcing imx219_power_down
2803[ 18.080900 / 01-27 01:06:18.891][2] DOWN seq_type 1 seq_val 0 config_val 0 delay 1
2804[ 18.080905 / 01-27 01:06:18.891][2] DOWN seq_type 2 seq_val 1 config_val 0 delay 0
2805[ 18.080910 / 01-27 01:06:18.891][2] DOWN seq_type 1 seq_val 4 config_val 0 delay 0
2806[ 18.080915 / 01-27 01:06:18.891][2] DOWN seq_type 2 seq_val 0 config_val 0 delay 0
2807[ 18.080920 / 01-27 01:06:18.891][2] DOWN seq_type 0 seq_val 0 config_val 0 delay 0
2808[ 18.081068 / 01-27 01:06:18.891][2] msm_sensor_fill_eeprom_subdevid_by_name:330 Eeprom userspace probe for m24c32_imx219
2809[ 18.081074 / 01-27 01:06:18.891][2] msm_sensor_fill_eeprom_subdevid_by_name:352 Eeprom subdevice id is 2
2810[ 18.081082 / 01-27 01:06:18.891][2] msm_sensor_fill_tcs_subdevid_by_name:479 src_node NULL
2811[ 18.081088 / 01-27 01:06:18.891][2] msm_sensor_fill_proxy_subdevid_by_name:520 src_node NULL
2812[ 18.087494 / 01-27 01:06:18.891][2] msm_cci_init:1399: hw_version = 0x10040000
2813[ 18.087771 / 01-27 01:06:18.891][3] msm_sensor_power_up(205) imx219
2814[ 18.087779 / 01-27 01:06:18.891][3] imx219 probe succeeded
2815[ 18.088483 / 01-27 01:06:18.891][3] rc 0 session_id 4<6>[ 18.088598 / 01-27 01:06:18.891][3] msm_sensor_power_down(147) imx219
2816[ 18.095511 / 01-27 01:06:18.901][3] msm_proxy_get_subdev_id:196 Enter
2817[ 18.119579 / 01-27 01:06:18.921][2] msm_cci_init:1399: hw_version = 0x10040000
2818[ 18.149959 / 01-27 01:06:18.951][2] [CCAudit] do_sys_open error=-13 file=/sys/kernel/debug/tracing/trace_marker flag=655361 proc=AudioOut_D parent=init
2819[ 18.399887 / 01-27 01:06:19.201][2] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
2820[ 18.402745 / 01-27 01:06:19.211][2] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
2821[ 18.402815 / 01-27 01:06:19.211][2] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
2822[ 18.402880 / 01-27 01:06:19.211][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2823[ 18.402887 / 01-27 01:06:19.211][2] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
2824[ 18.402951 / 01-27 01:06:19.211][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2825[ 18.402957 / 01-27 01:06:19.211][2] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
2826[ 18.403019 / 01-27 01:06:19.211][2] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
2827[ 18.403082 / 01-27 01:06:19.211][2] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
2828[ 18.403142 / 01-27 01:06:19.211][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2829[ 18.403148 / 01-27 01:06:19.211][2] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
2830[ 18.403205 / 01-27 01:06:19.211][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
2831[ 18.403211 / 01-27 01:06:19.211][2] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
2832[ 18.403272 / 01-27 01:06:19.211][2] es9218_left_volume_get(): Left Volume= -0 db
2833[ 18.403327 / 01-27 01:06:19.211][2] es9218_right_volume_get(): Right Volume= -0 db
2834[ 18.403385 / 01-27 01:06:19.211][2] es9218_master_volume_get(): Master Volume= -0 db
2835[ 18.403438 / 01-27 01:06:19.211][2] es9218_filter_enum_get(): ucontrol = 8
2836[ 18.403506 / 01-27 01:06:19.211][2] es9218_power_state_get(): power state = 0
2837[ 18.403511 / 01-27 01:06:19.211][2] es9218_power_state_get(): ucontrol = 0
2838[ 18.403628 / 01-27 01:06:19.211][2] es9218_clk_divider_get() : invalid state = CLOSE
2839[ 18.403693 / 01-27 01:06:19.211][2] es9218_chip_state_get(): enter
2840[ 18.403726 / 01-27 01:06:19.211][2] es9218_power_gpio_H(): pa_gpio_level = 1
2841[ 18.404756 / 01-27 01:06:19.211][2] es9218_reset_gpio_H(): pa_gpio_level = 1
2842[ 18.406384 / 01-27 01:06:19.211][2] es9218_chip_state_get : i2_read success : 0
2843[ 18.406420 / 01-27 01:06:19.211][2] es9218_reset_gpio_L(): pa_gpio_level = 0
2844[ 18.406424 / 01-27 01:06:19.211][2] es9218_chip_state_get(): leave
2845[ 18.406728 / 01-27 01:06:19.211][2] es9218_avc_volume_get(): AVC Volume= -0 db
2846[ 18.406810 / 01-27 01:06:19.211][2] es9218_headset_type_get(): type = 0
2847[ 18.406873 / 01-27 01:06:19.211][2] es9218_dop_get() 0
2848[ 18.406931 / 01-27 01:06:19.211][2] es9218_auto_mute_get(): type = 0
2849[ 18.407013 / 01-27 01:06:19.211][2] es9218_sabre_wcdon2bypass_get(): power state = 0
2850[ 18.408666 / 01-27 01:06:19.211][2] msm_pcm_volume_ctl_get substream runtime not found
2851[ 18.409112 / 01-27 01:06:19.211][2] msm_pcm_volume_ctl_get substream runtime not found
2852[ 18.409559 / 01-27 01:06:19.211][2] msm_pcm_volume_ctl_get substream runtime not found
2853[ 18.409780 / 01-27 01:06:19.211][2] msm_compr_audio_effects_config_get: stream or effects inactive
2854[ 18.410638 / 01-27 01:06:19.221][2] msm_pcm_volume_ctl_get substream runtime not found
2855[ 18.410823 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2856[ 18.411156 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2857[ 18.411825 / 01-27 01:06:19.221][2] msm_pcm_volume_ctl_get substream runtime not found
2858[ 18.411952 / 01-27 01:06:19.221][2] msm_pcm_volume_ctl_get substream or runtime not found
2859[ 18.412571 / 01-27 01:06:19.221][2] msm_pcm_volume_ctl_get substream runtime not found
2860[ 18.414059 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2861[ 18.414470 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2862[ 18.414857 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2863[ 18.415179 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2864[ 18.415518 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2865[ 18.415842 / 01-27 01:06:19.221][2] msm_compr_audio_effects_config_get: stream or effects inactive
2866[ 18.416327 / 01-27 01:06:19.221][2] msm_pcm_volume_ctl_get substream runtime not found
2867[ 18.418038 / 01-27 01:06:19.221][0] sps:BAM 0x0000000007544000 (va:0xffffff8002640000) enabled: ver:0x19, number of pipes:24
2868[ 18.418049 / 01-27 01:06:19.221][2] msm_pcm_volume_ctl_get substream runtime not found
2869[ 18.451474 / 01-27 01:06:19.261][2] tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
2870[ 18.524161 / 01-27 01:06:19.331][0] msm_cci_init:1399: hw_version = 0x10040000
2871[ 18.588311 / 01-27 01:06:19.391][1] [CCAudit] do_sys_open error=-13 file=/data/dalvik-cache/arm64/system@framework@tcmclient.jar@classes.dex flag=131650 proc=main parent=init
2872[ 18.588703 / 01-27 01:06:19.391][2] [CCAudit] do_sys_open error=-13 file=/data/dalvik-cache/arm/system@framework@tcmclient.jar@classes.dex flag=131650 proc=main parent=init
2873[ 18.747309 / 01-27 01:06:19.551][2] msm_csid_init: CSID_VERSION = 0x30050000
2874[ 18.747996 / 01-27 01:06:19.551][0] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
2875[ 18.750561 / 01-27 01:06:19.561][1] msm_csid_init: CSID_VERSION = 0x30050000
2876[ 18.751283 / 01-27 01:06:19.561][0] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
2877[ 18.754136 / 01-27 01:06:19.561][3] msm_csid_init: CSID_VERSION = 0x30050000
2878[ 18.754729 / 01-27 01:06:19.561][0] msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
2879[ 19.056293 / 01-27 01:06:19.861][0] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
2880[ 19.056315 / 01-27 01:06:19.861][0] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
2881[ 19.240933 / 01-27 01:06:20.051][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
2882[ 19.240948 / 01-27 01:06:20.051][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
2883[ 19.627353 / 01-27 01:06:20.431][2] msm_pm_qos_update_request: update request 100
2884[ 19.627371 / 01-27 01:06:20.431][2] msm_create_command_ack_q: session_id = 2, stream_id = 0
2885[ 19.630301 / 01-27 01:06:20.441][0] msm_csid_init: CSID_VERSION = 0x30050000
2886[ 19.630903 / 01-27 01:06:20.441][0] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
2887[ 19.645903 / 01-27 01:06:20.451][2] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
2888[ 19.645918 / 01-27 01:06:20.451][2] MSM-CPP cpp_init_hardware:885 stream_cnt:0
2889[ 19.671675 / 01-27 01:06:20.481][1] init: avc: denied { set } for property=sys.camera.pd_test.result pid=583 uid=1006 gid=1006 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=0
2890[ 19.671705 / 01-27 01:06:20.481][1] init: sys_prop: permission denied uid:1006 name:sys.camera.pd_test.result
2891[ 19.673703 / 01-27 01:06:20.501][1] msm_pm_qos_update_request: update request -1
2892[ 19.690405 / 01-27 01:06:20.501][1] msm_cci_init:1399: hw_version = 0x10040000
2893[ 19.690674 / 01-27 01:06:20.501][0] msm_sensor_power_up(205) imx298_lgit
2894[ 19.729227 / 01-27 01:06:20.531][3] lge,blmap: br_lvl(85) -> bl_lvl(232)
2895[ 19.729240 / 01-27 01:06:20.531][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(232) in U3 mode. Will be updated when kick off function
2896[ 19.742788 / 01-27 01:06:20.551][3] mdss_fb_update_backlight: [Display] backlight sent to panel :232 in mdss_fb_update_backlight
2897[ 19.744977 / 01-27 01:06:20.551][3] qpnp_wled_module_en : wled module enable
2898[ 19.745484 / 01-27 01:06:20.551][0] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
2899[ 19.746240 / 01-27 01:06:20.551][3] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
2900[ 19.747617 / 01-27 01:06:20.551][2] ipa-wan ipa_wwan_ioctl:1524 get AGG size 8192 count 10
2901[ 19.747889 / 01-27 01:06:20.551][2] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
2902[ 19.750947 / 01-27 01:06:20.561][2] ipa ipa_assign_policy:3112 get close-by 8192
2903[ 19.750962 / 01-27 01:06:20.561][2] ipa ipa_assign_policy:3118 set rx_buff_sz 7680
2904[ 19.750967 / 01-27 01:06:20.561][2] ipa ipa_assign_policy:3141 set aggr_limit 6
2905[ 19.763972 / 01-27 01:06:20.571][0] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data0) register to IPA
2906[ 19.797034 / 01-27 01:06:20.601][0] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data1) register to IPA
2907[ 19.835867 / 01-27 01:06:20.641][2] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data2) register to IPA
2908[ 19.869533 / 01-27 01:06:20.671][3] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data3) register to IPA
2909[ 19.908475 / 01-27 01:06:20.711][1] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data4) register to IPA
2910[ 19.932094 / 01-27 01:06:20.741][3] msm_ois_init : LGIT rohm i2c shift addr 0x3e!
2911[ 19.932242 / 01-27 01:06:20.741][3] msm_proxy_thread_start:729 msm_proxy_thread_start
2912[ 19.933743 / 01-27 01:06:20.741][3] msm_proxy_thread_start:744 INIT_WORK done!
2913[ 19.933762 / 01-27 01:06:20.741][3] msm_proxy_thread_start:747 queue_work done!
2914[ 19.933868 / 01-27 01:06:20.741][2] msm_init_proxy_EwokAPI:2019 msm_init_proxy_EwokAPI(): Starting...
2915[ 19.954726 / 01-27 01:06:20.761][2] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data5) register to IPA
2916[ 19.963157 / 01-27 01:06:20.771][3] lgit_imx298_init_set_rohm_ois:610 Enter, 16-07-26, 16M LGIT OIS bu24333GWL
2917[ 19.971582 / 01-27 01:06:20.781][2] [CHECK] lgit_imx298_init_set_rohm_ois: Apply THIN_1226_LGIT_ACTUATOR_LGIT_VER16_REL_BIN_DATA, 14s
2918[ 19.971599 / 01-27 01:06:20.781][2] lgit_imx298_rohm_ois_bin_download:275 Enter
2919[ 20.004139 / 01-27 01:06:20.811][1] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data6) register to IPA
2920[ 20.008445 / 01-27 01:06:20.811][1] msm_init_proxy_EwokAPI:2168 read offset = -34 from eeprom
2921[ 20.009990 / 01-27 01:06:20.811][3] msm_init_proxy_EwokAPI:2172 e2p_offset = -34, st_offset = 41000, sensor_offset = 7
2922[ 20.020415 / 01-27 01:06:20.831][0] msm_init_proxy_EwokAPI:2432 msm_init_proxy_EwokAPI(): End!
2923[ 20.020433 / 01-27 01:06:20.831][0] msm_proxy_config:1605 msm_proxy_config: Proxy is on! error_code = 0
2924[ 20.046882 / 01-27 01:06:20.851][0] ipa-wan ipa_wwan_ioctl:1430 dev(rmnet_data7) register to IPA
2925[ 20.097946 / 01-27 01:06:20.911][1] RX msgq status HW:0x0, SW:2:
2926[ 20.100776 / 01-27 01:06:20.911][1] tasha_codec tasha_codec: tasha_swrm_clock: swrm clock users 0
2927[ 20.113657 / 01-27 01:06:20.921][1] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd
2928[ 20.220136 / 01-27 01:06:21.031][1] lgit_imx298_rohm_ois_bin_download:333 End
2929[ 20.220155 / 01-27 01:06:21.031][1] lgit_imx298_rohm_ois_init_cmd:344 Enter
2930[ 20.247810 / 01-27 01:06:21.051][2] lgit_imx298_rohm_ois_init_cmd:404 End
2931[ 20.247830 / 01-27 01:06:21.051][2] lgit_imx298_init_set_rohm_ois:685 End
2932[ 20.247947 / 01-27 01:06:21.051][2] lgit_imx298_rohm_ois_off:731 Enter
2933[ 20.254777 / 01-27 01:06:21.061][3] lgit_imx298_rohm_ois_off:742 End
2934[ 20.255162 / 01-27 01:06:21.061][0] stop_proxy:699 stop_proxy!
2935[ 20.280113 / 01-27 01:06:21.091][3] get_proxy:695 end workqueue!
2936[ 20.280220 / 01-27 01:06:21.091][0] stop_proxy:708 destroy_workqueue!
2937[ 20.280488 / 01-27 01:06:21.091][1] msm_proxy_thread_end:754 msm_proxy_thread_end
2938[ 20.280501 / 01-27 01:06:21.091][1] stop_proxy:699 stop_proxy!
2939[ 20.282220 / 01-27 01:06:21.091][1] msm_flash_off:387 msm_flash_off done
2940[ 20.282973 / 01-27 01:06:21.091][1] CAM_PREVIEW_TUNE_OFF
2941[ 20.282994 / 01-27 01:06:21.091][1] msm_sensor_power_down(147) imx298_lgit
2942[ 20.284688 / 01-27 01:06:21.091][1] SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
2943[ 20.284703 / 01-27 01:06:21.091][1] SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
2944[ 20.284711 / 01-27 01:06:21.091][1] vote: name[SMBCHG: usb_suspend], client_id[1], state[0], val[0]
2945[ 20.284722 / 01-27 01:06:21.091][1] SMBCHG: usb_suspend: 1 voting for 0 - off
2946[ 20.292903 / 01-27 01:06:21.101][1] msm_delete_command_ack_q: session_id = 2, stream_id = 0
2947[ 20.292927 / 01-27 01:06:21.101][1] msm_destroy_session: session_id = 2
2948[ 20.294523 / 01-27 01:06:21.101][1] msm_pm_qos_update_request: update request 100
2949[ 20.294546 / 01-27 01:06:21.101][1] msm_create_command_ack_q: session_id = 3, stream_id = 0
2950[ 20.296681 / 01-27 01:06:21.101][2] msm_csid_init: CSID_VERSION = 0x30050000
2951[ 20.297380 / 01-27 01:06:21.101][0] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
2952[ 20.300132 / 01-27 01:06:21.111][1] pet_watchdog [enable : 1, jiffies : 4294939326, delay_time : 1000]
2953[ 20.304973 / 01-27 01:06:21.111][2] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
2954[ 20.304989 / 01-27 01:06:21.111][2] MSM-CPP cpp_init_hardware:885 stream_cnt:0
2955[ 20.312789 / 01-27 01:06:21.121][3] msm_sensor_power_up(205) hi553
2956[ 20.319411 / 01-27 01:06:21.121][2] init: avc: denied { set } for property=sys.camera.pd_test.result pid=583 uid=1006 gid=1006 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=0
2957[ 20.319435 / 01-27 01:06:21.121][2] init: sys_prop: permission denied uid:1006 name:sys.camera.pd_test.result
2958[ 20.329406 / 01-27 01:06:21.241][3] msm_pm_qos_update_request: update request -1
2959[ 20.431974 / 01-27 01:06:21.241][3] CAM_PREVIEW_TUNE_OFF
2960[ 20.431991 / 01-27 01:06:21.241][3] msm_sensor_power_down(147) hi553
2961[ 20.442430 / 01-27 01:06:21.251][3] msm_delete_command_ack_q: session_id = 3, stream_id = 0
2962[ 20.442450 / 01-27 01:06:21.251][3] msm_destroy_session: session_id = 3
2963[ 20.443068 / 01-27 01:06:21.251][3] msm_pm_qos_update_request: update request 100
2964[ 20.443085 / 01-27 01:06:21.251][3] msm_create_command_ack_q: session_id = 4, stream_id = 0
2965[ 20.445851 / 01-27 01:06:21.251][3] msm_csid_init: CSID_VERSION = 0x30050000
2966[ 20.446337 / 01-27 01:06:21.251][0] msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
2967[ 20.460975 / 01-27 01:06:21.271][2] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
2968[ 20.460990 / 01-27 01:06:21.271][2] MSM-CPP cpp_init_hardware:885 stream_cnt:0
2969[ 20.469769 / 01-27 01:06:21.271][3] msm_cci_init:1399: hw_version = 0x10040000
2970[ 20.470082 / 01-27 01:06:21.281][3] msm_sensor_power_up(205) imx219
2971[ 20.473063 / 01-27 01:06:21.281][3] init: avc: denied { set } for property=sys.camera.pd_test.result pid=583 uid=1006 gid=1006 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=0
2972[ 20.473086 / 01-27 01:06:21.281][3] init: sys_prop: permission denied uid:1006 name:sys.camera.pd_test.result
2973[ 20.477211 / 01-27 01:06:21.301][3] msm_pm_qos_update_request: update request -1
2974[ 20.499343 / 01-27 01:06:21.301][3] msm_flash_off:387 msm_flash_off done
2975[ 20.499380 / 01-27 01:06:21.301][3] CAM_PREVIEW_TUNE_OFF
2976[ 20.499392 / 01-27 01:06:21.301][3] msm_sensor_power_down(147) imx219
2977[ 20.501918 / 01-27 01:06:21.311][2] SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
2978[ 20.501930 / 01-27 01:06:21.311][2] SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
2979[ 20.501937 / 01-27 01:06:21.311][2] vote: name[SMBCHG: usb_suspend], client_id[1], state[0], val[0]
2980[ 20.501946 / 01-27 01:06:21.311][2] SMBCHG: usb_suspend: votes unchanged; skipping
2981[ 20.511354 / 01-27 01:06:21.321][1] msm_delete_command_ack_q: session_id = 4, stream_id = 0
2982[ 20.511377 / 01-27 01:06:21.321][1] msm_destroy_session: session_id = 4
2983[ 21.446536 / 01-27 01:06:22.251][3] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd
2984[ 22.544862 / 01-27 01:06:23.351][0] [CCAudit] do_sys_open error=-13 file=/proc/self/oom_score_adj flag=655361 proc=adbd parent=adbd