· 6 years ago · Feb 08, 2020, 11:52 AM
1[ 0.000000] Linux version 4.19.79-brunch-sebanc (sebanc@tablet) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #1 SMP PREEMPT Tue Jan 28 18:55:22 CET 2020
2[ 0.000000] Command line: BOOT_IMAGE=(hd0,7)/kernel boot=local noresume noswap loglevel=7 disablevmx=off cros_secure cros_debug
3[ 0.000000] KERNEL supported cpus:
4[ 0.000000] Intel GenuineIntel
5[ 0.000000] AMD AuthenticAMD
6[ 0.000000] Centaur CentaurHauls
7[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
8[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
9[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
10[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
11[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
12[ 0.000000] BIOS-provided physical RAM map:
13[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
14[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
15[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
16[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7378fff] usable
18[ 0.000000] BIOS-e820: [mem 0x00000000d7379000-0x00000000d76d1fff] reserved
19[ 0.000000] BIOS-e820: [mem 0x00000000d76d2000-0x00000000dae70fff] usable
20[ 0.000000] BIOS-e820: [mem 0x00000000dae71000-0x00000000daecffff] reserved
21[ 0.000000] BIOS-e820: [mem 0x00000000daed0000-0x00000000db32ffff] usable
22[ 0.000000] BIOS-e820: [mem 0x00000000db330000-0x00000000dc46bfff] ACPI NVS
23[ 0.000000] BIOS-e820: [mem 0x00000000dc46c000-0x00000000dcffefff] reserved
24[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
25[ 0.000000] BIOS-e820: [mem 0x00000000dd800000-0x00000000dfffffff] reserved
26[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
27[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
28[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
29[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
30[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
31[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
32[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
33[ 0.000000] NX (Execute Disable) protection: active
34[ 0.000000] e820: update [mem 0xd5f95018-0xd5fa5057] usable ==> usable
35[ 0.000000] e820: update [mem 0xd5f95018-0xd5fa5057] usable ==> usable
36[ 0.000000] extended physical RAM map:
37[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
38[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
39[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
40[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
41[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d5f95017] usable
42[ 0.000000] reserve setup_data: [mem 0x00000000d5f95018-0x00000000d5fa5057] usable
43[ 0.000000] reserve setup_data: [mem 0x00000000d5fa5058-0x00000000d7378fff] usable
44[ 0.000000] reserve setup_data: [mem 0x00000000d7379000-0x00000000d76d1fff] reserved
45[ 0.000000] reserve setup_data: [mem 0x00000000d76d2000-0x00000000dae70fff] usable
46[ 0.000000] reserve setup_data: [mem 0x00000000dae71000-0x00000000daecffff] reserved
47[ 0.000000] reserve setup_data: [mem 0x00000000daed0000-0x00000000db32ffff] usable
48[ 0.000000] reserve setup_data: [mem 0x00000000db330000-0x00000000dc46bfff] ACPI NVS
49[ 0.000000] reserve setup_data: [mem 0x00000000dc46c000-0x00000000dcffefff] reserved
50[ 0.000000] reserve setup_data: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
51[ 0.000000] reserve setup_data: [mem 0x00000000dd800000-0x00000000dfffffff] reserved
52[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
53[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
54[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
55[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
56[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
57[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
58[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000011effffff] usable
59[ 0.000000] efi: EFI v2.40 by American Megatrends
60[ 0.000000] efi: ESRT=0xdce2dd98 ACPI=0xdb776000 ACPI 2.0=0xdb776000 SMBIOS=0xdce2d918
61[ 0.000000] SMBIOS 2.8 present.
62[ 0.000000] DMI: ASUSTeK COMPUTER INC. T300FA/T300FA, BIOS T300FA.214 09/01/2015
63[ 0.000000] tsc: Fast TSC calibration using PIT
64[ 0.000000] tsc: Initial usec timer 10136978
65[ 0.000000] tsc: Detected 997.612 MHz processor
66[ 0.000067] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
67[ 0.000070] e820: remove [mem 0x000a0000-0x000fffff] usable
68[ 0.000079] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
69[ 0.000085] MTRR default type: uncachable
70[ 0.000086] MTRR fixed ranges enabled:
71[ 0.000087] 00000-9FFFF write-back
72[ 0.000089] A0000-DFFFF uncachable
73[ 0.000090] E0000-FFFFF write-protect
74[ 0.000091] MTRR variable ranges enabled:
75[ 0.000093] 0 base 0000000000 mask 7F80000000 write-back
76[ 0.000094] 1 base 0080000000 mask 7FC0000000 write-back
77[ 0.000095] 2 base 00C0000000 mask 7FF0000000 write-back
78[ 0.000097] 3 base 00D0000000 mask 7FF8000000 write-back
79[ 0.000098] 4 base 00D8000000 mask 7FFC000000 write-back
80[ 0.000099] 5 base 00DC000000 mask 7FFF000000 write-back
81[ 0.000100] 6 base 0100000000 mask 7FE0000000 write-back
82[ 0.000101] 7 base 011F000000 mask 7FFF000000 uncachable
83[ 0.000102] 8 disabled
84[ 0.000103] 9 disabled
85[ 0.001302] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
86[ 0.002058] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
87[ 0.002065] last_pfn = 0xdd000 max_arch_pfn = 0x400000000
88[ 0.012428] esrt: Reserving ESRT space from 0x00000000dce2dd98 to 0x00000000dce2ddd0.
89[ 0.012438] Scanning 1 areas for low memory corruption
90[ 0.012444] Using GB pages for direct mapping
91[ 0.012447] BRK [0xd1601000, 0xd1601fff] PGTABLE
92[ 0.012449] BRK [0xd1602000, 0xd1602fff] PGTABLE
93[ 0.012451] BRK [0xd1603000, 0xd1603fff] PGTABLE
94[ 0.012505] BRK [0xd1604000, 0xd1604fff] PGTABLE
95[ 0.012507] BRK [0xd1605000, 0xd1605fff] PGTABLE
96[ 0.012797] BRK [0xd1606000, 0xd1606fff] PGTABLE
97[ 0.012925] BRK [0xd1607000, 0xd1607fff] PGTABLE
98[ 0.013240] BRK [0xd1608000, 0xd1608fff] PGTABLE
99[ 0.013326] BRK [0xd1609000, 0xd1609fff] PGTABLE
100[ 0.013534] Secure boot disabled
101[ 0.013536] RAMDISK: [mem 0x5fd23000-0x60040fff]
102[ 0.013544] ACPI: Early table checksum verification disabled
103[ 0.013548] ACPI: RSDP 0x00000000DB776000 000024 (v02 _ASUS_)
104[ 0.013553] ACPI: XSDT 0x00000000DB7760A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
105[ 0.013560] ACPI: FACP 0x00000000DB78E720 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
106[ 0.013567] ACPI: DSDT 0x00000000DB776210 01850F (v02 _ASUS_ Notebook 01072009 INTL 20120913)
107[ 0.013572] ACPI: FACS 0x00000000DC469F80 000040
108[ 0.013576] ACPI: APIC 0x00000000DB78E830 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
109[ 0.013581] ACPI: FPDT 0x00000000DB78E8B8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
110[ 0.013585] ACPI: FIDT 0x00000000DB78E900 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
111[ 0.013590] ACPI: ECDT 0x00000000DB78E9A0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
112[ 0.013595] ACPI: MCFG 0x00000000DB78EA68 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
113[ 0.013599] ACPI: HPET 0x00000000DB78EAA8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
114[ 0.013604] ACPI: SSDT 0x00000000DB78EAE0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
115[ 0.013609] ACPI: UEFI 0x00000000DB78EDF8 000042 (v01 00000000 00000000)
116[ 0.013613] ACPI: SSDT 0x00000000DB78EE40 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
117[ 0.013618] ACPI: ASF! 0x00000000DB78FAC0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
118[ 0.013623] ACPI: SSDT 0x00000000DB78FB60 000410 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
119[ 0.013628] ACPI: SSDT 0x00000000DB78FF70 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
120[ 0.013633] ACPI: SSDT 0x00000000DB790AE8 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
121[ 0.013637] ACPI: SSDT 0x00000000DB793D30 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
122[ 0.013642] ACPI: PCCT 0x00000000DB7940C8 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
123[ 0.013646] ACPI: SSDT 0x00000000DB794138 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
124[ 0.013651] ACPI: SSDT 0x00000000DB794C00 006622 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
125[ 0.013657] ACPI: DMAR 0x00000000DB79B228 0000CC (v01 INTEL BDW 00000001 INTL 00000001)
126[ 0.013661] ACPI: CSRT 0x00000000DB79B2F8 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
127[ 0.013666] ACPI: BGRT 0x00000000DB79B3C0 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
128[ 0.013671] ACPI: MSDM 0x00000000DAECEE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
129[ 0.013683] ACPI: Local APIC address 0xfee00000
130[ 0.013772] No NUMA configuration found
131[ 0.013773] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
132[ 0.013778] NODE_DATA(0) allocated [mem 0x11eff9000-0x11effdfff]
133[ 0.013800] Zone ranges:
134[ 0.013802] DMA [mem 0x0000000000001000-0x0000000000ffffff]
135[ 0.013804] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
136[ 0.013807] Normal [mem 0x0000000100000000-0x000000011effffff]
137[ 0.013809] Device empty
138[ 0.013811] Movable zone start for each node
139[ 0.013812] Early memory node ranges
140[ 0.013814] node 0: [mem 0x0000000000001000-0x0000000000057fff]
141[ 0.013816] node 0: [mem 0x0000000000059000-0x000000000009dfff]
142[ 0.013817] node 0: [mem 0x0000000000100000-0x00000000d7378fff]
143[ 0.013819] node 0: [mem 0x00000000d76d2000-0x00000000dae70fff]
144[ 0.013821] node 0: [mem 0x00000000daed0000-0x00000000db32ffff]
145[ 0.013822] node 0: [mem 0x00000000dcfff000-0x00000000dcffffff]
146[ 0.013824] node 0: [mem 0x0000000100000000-0x000000011effffff]
147[ 0.013828] Reserved but unavailable: 98 pages
148[ 0.013830] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
149[ 0.013833] On node 0 totalpages: 1023765
150[ 0.013834] DMA zone: 64 pages used for memmap
151[ 0.013835] DMA zone: 21 pages reserved
152[ 0.013836] DMA zone: 3996 pages, LIFO batch:0
153[ 0.013950] DMA32 zone: 13950 pages used for memmap
154[ 0.013951] DMA32 zone: 892793 pages, LIFO batch:63
155[ 0.041315] Normal zone: 1984 pages used for memmap
156[ 0.041318] Normal zone: 126976 pages, LIFO batch:31
157[ 0.045063] Reserving Intel graphics memory at [mem 0xde000000-0xdfffffff]
158[ 0.045255] ACPI: PM-Timer IO Port: 0x1808
159[ 0.045258] ACPI: Local APIC address 0xfee00000
160[ 0.045266] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
161[ 0.045268] ACPI: NMI not connected to LINT 1!
162[ 0.045270] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
163[ 0.045271] ACPI: NMI not connected to LINT 1!
164[ 0.045273] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
165[ 0.045275] ACPI: NMI not connected to LINT 1!
166[ 0.045276] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
167[ 0.045278] ACPI: NMI not connected to LINT 1!
168[ 0.045292] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
169[ 0.045296] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
170[ 0.045299] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
171[ 0.045301] ACPI: IRQ0 used by override.
172[ 0.045304] ACPI: IRQ9 used by override.
173[ 0.045307] Using ACPI (MADT) for SMP configuration information
174[ 0.045310] ACPI: HPET id: 0x8086a701 base: 0xfed00000
175[ 0.045324] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x25 (or later)
176[ 0.045327] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
177[ 0.045353] [mem 0xe0000000-0xf7ffffff] available for PCI devices
178[ 0.045355] Booting paravirtualized kernel on bare hardware
179[ 0.045360] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
180[ 0.045369] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
181[ 0.045699] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
182[ 0.045708] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
183[ 0.045709] pcpu-alloc: [0] 0 1 2 3
184[ 0.045735] Built 1 zonelists, mobility grouping on. Total pages: 1007746
185[ 0.045738] Policy zone: Normal
186[ 0.045740] Kernel command line: BOOT_IMAGE=(hd0,7)/kernel boot=local noresume noswap loglevel=7 disablevmx=off cros_secure cros_debug
187[ 0.052721] Calgary: detecting Calgary via BIOS EBDA area
188[ 0.052725] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
189[ 0.072499] Memory: 3860248K/4095060K available (14348K kernel code, 1865K rwdata, 5528K rodata, 1736K init, 4472K bss, 234812K reserved, 0K cma-reserved)
190[ 0.072632] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
191[ 0.072648] Kernel/User page tables isolation: enabled
192[ 0.072791] ftrace: allocating 52995 entries in 208 pages
193[ 0.102654] rcu: Preemptible hierarchical RCU implementation.
194[ 0.102657] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
195[ 0.102658] Tasks RCU enabled.
196[ 0.102660] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
197[ 0.106556] NR_IRQS: 4352, nr_irqs: 728, preallocated irqs: 16
198[ 0.106766] random: get_random_bytes called from start_kernel+0x34b/0x53d with crng_init=0
199[ 0.106795] Console: colour dummy device 80x25
200[ 0.107270] console [tty0] enabled
201[ 0.107289] ACPI: Core revision 20180810
202[ 0.107727] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
203[ 0.107741] hpet clockevent registered
204[ 0.107747] APIC: Switch to symmetric I/O mode setup
205[ 0.107751] DMAR: Host address width 39
206[ 0.107755] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
207[ 0.107764] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
208[ 0.107769] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
209[ 0.107775] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
210[ 0.107780] DMAR: RMRR base: 0x000000dce3e000 end: 0x000000dce4cfff
211[ 0.107785] DMAR: RMRR base: 0x000000dd800000 end: 0x000000dfffffff
212[ 0.107789] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
213[ 0.107793] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
214[ 0.107797] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
215[ 0.107801] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
216[ 0.107802] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
217[ 0.108509] DMAR-IR: Enabled IRQ remapping in xapic mode
218[ 0.108513] x2apic: IRQ remapping doesn't support X2APIC mode
219[ 0.109071] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
220[ 0.113750] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc28e8a6d8, max_idle_ns: 881590548585 ns
221[ 0.113757] Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.22 BogoMIPS (lpj=997612)
222[ 0.113764] pid_max: default: 32768 minimum: 301
223[ 0.114445] Security Framework initialized
224[ 0.114449] Yama: becoming mindful.
225[ 0.114457] LoadPin: ready to pin (currently enabled)
226[ 0.114459] Chromium OS LSM: enabled
227[ 0.114463] SELinux: Initializing.
228[ 0.114492] AppArmor: AppArmor disabled by boot time parameter
229[ 0.115343] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
230[ 0.115762] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
231[ 0.115791] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
232[ 0.115810] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
233[ 0.116125] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
234[ 0.116129] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
235[ 0.116147] CPU0: Thermal monitoring enabled (TM1)
236[ 0.116162] process: using mwait in idle threads
237[ 0.116168] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
238[ 0.116171] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
239[ 0.116175] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
240[ 0.116181] Spectre V2 : Mitigation: Full generic retpoline
241[ 0.116184] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
242[ 0.116189] Speculative Store Bypass: Vulnerable
243[ 0.116192] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
244[ 0.116585] Freeing SMP alternatives memory: 24K
245[ 0.222175] smpboot: CPU0: Intel(R) Core(TM) M-5Y10c CPU @ 0.80GHz (family: 0x6, model: 0x3d, stepping: 0x4)
246[ 0.227768] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
247[ 0.227799] ... version: 3
248[ 0.227801] ... bit width: 48
249[ 0.227804] ... generic registers: 4
250[ 0.227807] ... value mask: 0000ffffffffffff
251[ 0.227810] ... max period: 00007fffffffffff
252[ 0.227813] ... fixed-purpose events: 3
253[ 0.227816] ... event mask: 000000070000000f
254[ 0.229775] rcu: Hierarchical SRCU implementation.
255[ 0.234900] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
256[ 0.236777] smp: Bringing up secondary CPUs ...
257[ 0.246773] x86: Booting SMP configuration:
258[ 0.246777] .... node #0, CPUs: #1 #2
259[ 0.257299] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
260[ 0.266773] #3
261[ 0.267268] smp: Brought up 1 node, 4 CPUs
262[ 0.267268] smpboot: Max logical packages: 1
263[ 0.267268] smpboot: Total of 4 processors activated (7980.89 BogoMIPS)
264[ 0.268867] devtmpfs: initialized
265[ 0.268867] x86/mm: Memory block size: 128MB
266[ 0.269125] PM: Registering ACPI NVS region [mem 0xdb330000-0xdc46bfff] (18071552 bytes)
267[ 0.269767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
268[ 0.269779] futex hash table entries: 1024 (order: 4, 65536 bytes)
269[ 0.269876] pinctrl core: initialized pinctrl subsystem
270[ 0.270001] RTC time: 11:43:56, date: 02/08/20
271[ 0.270179] NET: Registered protocol family 16
272[ 0.270450] audit: initializing netlink subsys (disabled)
273[ 0.270770] audit: type=2000 audit(1581162235.162:1): state=initialized audit_enabled=0 res=1
274[ 0.270916] cpuidle: using governor ladder
275[ 0.271780] cpuidle: using governor menu
276[ 0.271780] Detected 1 PCC Subspaces
277[ 0.271837] Registering PCC driver as Mailbox controller
278[ 0.272846] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
279[ 0.272859] ACPI: bus type PCI registered
280[ 0.272867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
281[ 0.273044] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
282[ 0.273061] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
283[ 0.273089] PCI: Using configuration type 1 for base access
284[ 0.276773] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
285[ 0.276775] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
286[ 0.276808] cryptd: max_cpu_qlen set to 1000
287[ 0.276865] ACPI: Added _OSI(Module Device)
288[ 0.276869] ACPI: Added _OSI(Processor Device)
289[ 0.276872] ACPI: Added _OSI(3.0 _SCP Extensions)
290[ 0.276876] ACPI: Added _OSI(Processor Aggregator Device)
291[ 0.276879] ACPI: Added _OSI(Linux-Dell-Video)
292[ 0.276883] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
293[ 0.276889] ACPI: EC: EC started
294[ 0.276891] ACPI: EC: interrupt blocked
295[ 0.276908] ACPI: \: Used as first EC
296[ 0.276912] ACPI: \: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
297[ 0.276916] ACPI: \: Used as boot ECDT EC to handle transactions
298[ 0.308043] ACPI: 9 ACPI AML tables successfully acquired and loaded
299[ 0.319431] ACPI: Dynamic OEM Table Load:
300[ 0.319443] ACPI: SSDT 0xFFFF94A299696000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
301[ 0.320107] ACPI: Dynamic OEM Table Load:
302[ 0.320117] ACPI: SSDT 0xFFFF94A299447000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
303[ 0.320829] ACPI: Dynamic OEM Table Load:
304[ 0.320837] ACPI: SSDT 0xFFFF94A299693200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
305[ 0.322640] ACPI: Interpreter enabled
306[ 0.322678] ACPI: (supports S0 S3 S5)
307[ 0.322681] ACPI: Using IOAPIC for interrupt routing
308[ 0.322723] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
309[ 0.323619] ACPI: Enabled 7 GPEs in block 00 to 7F
310[ 0.327517] ACPI: Power Resource [PG00] (on)
311[ 0.328072] ACPI: Power Resource [PG01] (on)
312[ 0.328605] ACPI: Power Resource [PG02] (on)
313[ 0.343790] ACPI: Power Resource [FN00] (off)
314[ 0.343897] ACPI: Power Resource [FN01] (off)
315[ 0.343998] ACPI: Power Resource [FN02] (off)
316[ 0.344102] ACPI: Power Resource [FN03] (off)
317[ 0.344194] ACPI: Power Resource [FN04] (off)
318[ 0.345464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
319[ 0.345475] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
320[ 0.346276] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
321[ 0.346282] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
322[ 0.346934] PCI host bridge to bus 0000:00
323[ 0.346940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
324[ 0.346945] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
325[ 0.346949] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
326[ 0.346954] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
327[ 0.346959] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
328[ 0.346964] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
329[ 0.346969] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
330[ 0.346973] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
331[ 0.346978] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
332[ 0.346983] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
333[ 0.346988] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
334[ 0.346993] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
335[ 0.346998] pci_bus 0000:00: root bus resource [bus 00-3e]
336[ 0.347010] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
337[ 0.347159] pci 0000:00:02.0: [8086:161e] type 00 class 0x030000
338[ 0.347173] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
339[ 0.347181] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
340[ 0.347187] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
341[ 0.347204] pci 0000:00:02.0: BAR 2: assigned to efifb
342[ 0.347343] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
343[ 0.347355] pci 0000:00:03.0: reg 0x10: [mem 0xf711c000-0xf711ffff 64bit]
344[ 0.347515] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
345[ 0.347530] pci 0000:00:04.0: reg 0x10: [mem 0xf7110000-0xf7117fff 64bit]
346[ 0.347708] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
347[ 0.347728] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
348[ 0.347796] pci 0000:00:14.0: PME# supported from D3hot D3cold
349[ 0.347929] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
350[ 0.347952] pci 0000:00:16.0: reg 0x10: [mem 0xf7123000-0xf712301f 64bit]
351[ 0.348026] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
352[ 0.348189] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
353[ 0.348209] pci 0000:00:1b.0: reg 0x10: [mem 0xf7118000-0xf711bfff 64bit]
354[ 0.348271] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
355[ 0.348414] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
356[ 0.348501] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
357[ 0.348694] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
358[ 0.348790] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
359[ 0.348991] pci 0000:00:1f.0: [8086:9cc7] type 00 class 0x060100
360[ 0.349231] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
361[ 0.349247] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
362[ 0.349254] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
363[ 0.349260] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
364[ 0.349267] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
365[ 0.349274] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
366[ 0.349281] pci 0000:00:1f.2: reg 0x24: [mem 0xf7121000-0xf71217ff]
367[ 0.349319] pci 0000:00:1f.2: PME# supported from D3hot
368[ 0.349438] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
369[ 0.349455] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf71200ff 64bit]
370[ 0.349474] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
371[ 0.349679] acpiphp: Slot [1] registered
372[ 0.349689] pci 0000:00:1c.0: PCI bridge to [bus 01]
373[ 0.349805] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
374[ 0.349860] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf707ffff 64bit]
375[ 0.349939] pci 0000:02:00.0: reg 0x30: [mem 0xf7080000-0xf708ffff pref]
376[ 0.350075] pci 0000:02:00.0: supports D1 D2
377[ 0.350077] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
378[ 0.350264] pci 0000:00:1c.3: PCI bridge to [bus 02]
379[ 0.350273] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
380[ 0.351304] gpiochip_find_base: found new base at 418
381[ 0.351781] gpio gpiochip0: (INT3437:00): added GPIO chardev (254:0)
382[ 0.351781] gpiochip_setup_dev: registered GPIOs 418 to 511 on device: gpiochip0 (INT3437:00)
383[ 0.353755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
384[ 0.353832] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
385[ 0.353898] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
386[ 0.353964] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
387[ 0.354030] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
388[ 0.354094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
389[ 0.354159] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
390[ 0.354224] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
391[ 0.355035] ACPI: EC: interrupt unblocked
392[ 0.355035] ACPI: EC: event unblocked
393[ 0.355035] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
394[ 0.355035] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
395[ 0.355853] pci 0000:00:02.0: vgaarb: setting as boot VGA device
396[ 0.355853] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
397[ 0.355853] pci 0000:00:02.0: vgaarb: bridge control possible
398[ 0.355853] vgaarb: loaded
399[ 0.356015] SCSI subsystem initialized
400[ 0.356040] libata version 3.00 loaded.
401[ 0.356040] ACPI: bus type USB registered
402[ 0.356040] usbcore: registered new interface driver usbfs
403[ 0.356040] usbcore: registered new interface driver hub
404[ 0.356040] usbcore: registered new device driver usb
405[ 0.370701] i2c_designware INT3432:00: GPIO lookup for consumer scl
406[ 0.370703] i2c_designware INT3432:00: using ACPI for GPIO lookup
407[ 0.370706] acpi INT3432:00: GPIO: looking up scl-gpios
408[ 0.370708] acpi INT3432:00: GPIO: looking up scl-gpio
409[ 0.370709] i2c_designware INT3432:00: using lookup tables for GPIO lookup
410[ 0.370711] i2c_designware INT3432:00: No GPIO consumer scl found
411[ 0.387650] i2c_designware INT3433:00: GPIO lookup for consumer scl
412[ 0.387652] i2c_designware INT3433:00: using ACPI for GPIO lookup
413[ 0.387654] acpi INT3433:00: GPIO: looking up scl-gpios
414[ 0.387656] acpi INT3433:00: GPIO: looking up scl-gpio
415[ 0.387657] i2c_designware INT3433:00: using lookup tables for GPIO lookup
416[ 0.387659] i2c_designware INT3433:00: No GPIO consumer scl found
417[ 0.389758] media: Linux media interface: v0.10
418[ 0.389782] videodev: Linux video capture interface: v2.00
419[ 0.389782] pps_core: LinuxPPS API ver. 1 registered
420[ 0.389782] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
421[ 0.389783] PTP clock support registered
422[ 0.389803] EDAC MC: Ver: 3.0.0
423[ 0.389843] Registered efivars operations
424[ 0.391881] chromeos_acpi: installed
425[ 0.391926] Advanced Linux Sound Architecture Driver Initialized.
426[ 0.391936] PCI: Using ACPI for IRQ routing
427[ 0.393223] PCI: pci_cache_line_size set to 64 bytes
428[ 0.393274] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
429[ 0.393276] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
430[ 0.393278] e820: reserve RAM buffer [mem 0xd5f95018-0xd7ffffff]
431[ 0.393280] e820: reserve RAM buffer [mem 0xd7379000-0xd7ffffff]
432[ 0.393282] e820: reserve RAM buffer [mem 0xdae71000-0xdbffffff]
433[ 0.393284] e820: reserve RAM buffer [mem 0xdb330000-0xdbffffff]
434[ 0.393285] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
435[ 0.393287] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
436[ 0.393467] NetLabel: Initializing
437[ 0.393472] NetLabel: domain hash size = 128
438[ 0.393476] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
439[ 0.393505] NetLabel: unlabeled traffic allowed by default
440[ 0.394298] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
441[ 0.394309] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
442[ 0.396781] clocksource: Switched to clocksource tsc-early
443[ 0.420722] VFS: Disk quotas dquot_6.6.0
444[ 0.420754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
445[ 0.420947] pnp: PnP ACPI init
446[ 0.421204] system 00:00: [io 0x0240-0x0259] has been reserved
447[ 0.421214] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
448[ 0.421274] pnp 00:01: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
449[ 0.421400] system 00:02: [io 0x0680-0x069f] has been reserved
450[ 0.421405] system 00:02: [io 0xffff] has been reserved
451[ 0.421409] system 00:02: [io 0xffff] has been reserved
452[ 0.421413] system 00:02: [io 0xffff] has been reserved
453[ 0.421417] system 00:02: [io 0x1800-0x18fe] has been reserved
454[ 0.421421] system 00:02: [io 0x164e-0x164f] has been reserved
455[ 0.421428] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
456[ 0.421483] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
457[ 0.421531] system 00:04: [io 0x1854-0x1857] has been reserved
458[ 0.421538] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
459[ 0.421729] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
460[ 0.421734] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
461[ 0.421738] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
462[ 0.421758] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
463[ 0.421763] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
464[ 0.421768] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
465[ 0.421773] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
466[ 0.421778] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
467[ 0.421782] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
468[ 0.421787] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
469[ 0.421792] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
470[ 0.421797] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
471[ 0.421804] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
472[ 0.422674] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
473[ 0.422680] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
474[ 0.422684] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
475[ 0.422692] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
476[ 0.423937] pnp: PnP ACPI: found 7 devices
477[ 0.430177] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
478[ 0.430205] pci 0000:00:1c.0: PCI bridge to [bus 01]
479[ 0.430221] pci 0000:00:1c.3: PCI bridge to [bus 02]
480[ 0.430230] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
481[ 0.430243] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
482[ 0.430244] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
483[ 0.430246] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
484[ 0.430247] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
485[ 0.430249] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
486[ 0.430250] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
487[ 0.430252] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
488[ 0.430253] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
489[ 0.430254] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
490[ 0.430256] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
491[ 0.430257] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
492[ 0.430259] pci_bus 0000:00: resource 15 [mem 0xe0000000-0xfeafffff window]
493[ 0.430260] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
494[ 0.430451] NET: Registered protocol family 2
495[ 0.430627] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes)
496[ 0.430670] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
497[ 0.430775] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
498[ 0.431063] TCP: Hash tables configured (established 32768 bind 32768)
499[ 0.431112] UDP hash table entries: 2048 (order: 5, 196608 bytes)
500[ 0.431176] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
501[ 0.431309] NET: Registered protocol family 1
502[ 0.431318] NET: Registered protocol family 44
503[ 0.431330] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
504[ 0.431627] PCI: CLS 64 bytes, default 64
505[ 0.431679] Unpacking initramfs...
506[ 0.494195] Freeing initrd memory: 3192K
507[ 0.494240] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
508[ 0.494265] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
509[ 0.494269] software IO TLB: mapped [mem 0xd1f95000-0xd5f95000] (64MB)
510[ 0.495010] Scanning for low memory corruption every 60 seconds
511[ 0.496281] Initialise system trusted keyrings
512[ 0.496296] Key type blacklist registered
513[ 0.496336] workingset: timestamp_bits=40 max_order=20 bucket_order=0
514[ 0.498374] zbud: loaded
515[ 0.498946] squashfs: version 4.0 (2009/01/31) Phillip Lougher
516[ 0.499143] Registering esdfs 0.2
517[ 0.499178] fuse init (API version 7.27)
518[ 0.499388] alt_syscall: table 'read_write_test' available.
519[ 0.499406] alt_syscall: table 'android' available.
520[ 0.499420] alt_syscall: table 'android_permissive' available.
521[ 0.499436] alt_syscall: table 'third_party' available.
522[ 0.499448] alt_syscall: table 'third_party_permissive' available.
523[ 0.499461] alt_syscall: table 'complete' available.
524[ 0.499472] alt_syscall: table 'complete_permissive' available.
525[ 0.501134] Key type asymmetric registered
526[ 0.501141] Asymmetric key parser 'x509' registered
527[ 0.501156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
528[ 0.501198] io scheduler noop registered
529[ 0.501202] io scheduler deadline registered
530[ 0.501267] io scheduler cfq registered (default)
531[ 0.501285] io scheduler bfq registered
532[ 0.501986] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
533[ 0.502025] pcieport 0000:00:1c.3: Signaling PME with IRQ 43
534[ 0.502111] efifb: probing for efifb
535[ 0.502131] efifb: framebuffer at 0xe0000000, using 1876k, total 1875k
536[ 0.502136] efifb: mode is 800x600x32, linelength=3200, pages=1
537[ 0.502139] efifb: scrolling: redraw
538[ 0.502143] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
539[ 0.503694] Console: switching to colour frame buffer device 100x37
540[ 0.505213] fb0: EFI VGA frame buffer device
541[ 0.505249] intel_idle: MWAIT substates: 0x11142120
542[ 0.505250] intel_idle: v0.4.1 model 0x3D
543[ 0.505562] intel_idle: lapic_timer_reliable_states 0xffffffff
544[ 0.505842] ACPI: AC Adapter [AC0] (off-line)
545[ 0.506000] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
546[ 0.506065] ACPI: Lid Switch [LID]
547[ 0.506125] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
548[ 0.506208] ACPI: Sleep Button [SLPB]
549[ 0.506286] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
550[ 0.506361] ACPI: Power Button [PWRF]
551[ 0.508057] thermal LNXTHERM:00: registered as thermal_zone0
552[ 0.508090] ACPI: Thermal Zone [THRM] (38 C)
553[ 0.508660] thermal LNXTHERM:01: registered as thermal_zone1
554[ 0.508692] ACPI: Thermal Zone [TZ00] (28 C)
555[ 0.509695] thermal LNXTHERM:02: registered as thermal_zone2
556[ 0.510428] ACPI: Thermal Zone [TZ01] (30 C)
557[ 0.511400] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
558[ 0.518306] Non-volatile memory driver v1.3
559[ 0.519070] Linux agpgart interface v0.103
560[ 0.520086] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
561[ 0.520903] usbcore: registered new interface driver udl
562[ 0.523539] loop: module loaded
563[ 0.525103] ahci 0000:00:1f.2: version 3.0
564[ 0.536304] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
565[ 0.537670] random: fast init done
566[ 0.538445] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
567[ 0.543572] scsi host0: ahci
568[ 0.548021] scsi host1: ahci
569[ 0.548704] battery: ACPI: Battery Slot [BAT0] (battery present)
570[ 0.548973] scsi host2: ahci
571[ 0.551282] scsi host3: ahci
572[ 0.552153] ata1: SATA max UDMA/133 abar m2048@0xf7121000 port 0xf7121100 irq 44
573[ 0.552994] ata2: DUMMY
574[ 0.553829] ata3: DUMMY
575[ 0.554647] ata4: DUMMY
576[ 0.555597] mdio_bus fixed-0: GPIO lookup for consumer reset
577[ 0.555598] mdio_bus fixed-0: using lookup tables for GPIO lookup
578[ 0.555601] mdio_bus fixed-0: No GPIO consumer reset found
579[ 0.555608] libphy: Fixed MDIO Bus: probed
580[ 0.556415] PPP generic driver version 2.4.2
581[ 0.557314] PPP MPPE Compression module registered
582[ 0.558231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
583[ 0.559044] ehci-pci: EHCI PCI platform driver
584[ 0.559856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
585[ 0.560671] ohci-pci: OHCI PCI platform driver
586[ 0.561476] uhci_hcd: USB Universal Host Controller Interface driver
587[ 0.562451] xhci_hcd 0000:00:14.0: xHCI Host Controller
588[ 0.563315] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
589[ 0.565145] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
590[ 0.566672] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
591[ 0.566884] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
592[ 0.567689] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
593[ 0.568489] usb usb1: Product: xHCI Host Controller
594[ 0.569277] usb usb1: Manufacturer: Linux 4.19.79-brunch-sebanc xhci-hcd
595[ 0.570073] usb usb1: SerialNumber: 0000:00:14.0
596[ 0.571018] hub 1-0:1.0: USB hub found
597[ 0.571822] hub 1-0:1.0: 11 ports detected
598[ 0.577014] xhci_hcd 0000:00:14.0: xHCI Host Controller
599[ 0.577805] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
600[ 0.578553] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
601[ 0.579328] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
602[ 0.580074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
603[ 0.580824] usb usb2: Product: xHCI Host Controller
604[ 0.581557] usb usb2: Manufacturer: Linux 4.19.79-brunch-sebanc xhci-hcd
605[ 0.582289] usb usb2: SerialNumber: 0000:00:14.0
606[ 0.583129] hub 2-0:1.0: USB hub found
607[ 0.583882] hub 2-0:1.0: 4 ports detected
608[ 0.586295] usbcore: registered new interface driver cdc_acm
609[ 0.586996] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
610[ 0.587730] usbcore: registered new interface driver uas
611[ 0.588484] usbcore: registered new interface driver usb-storage
612[ 0.589208] usbcore: registered new interface driver ums-realtek
613[ 0.589927] usbcore: registered new interface driver usbserial_generic
614[ 0.590678] usbserial: USB Serial support registered for generic
615[ 0.591487] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
616[ 0.592223] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
617[ 0.595088] serio: i8042 KBD port at 0x60,0x64 irq 1
618[ 0.596239] rtc_cmos 00:03: RTC can wake from S4
619[ 0.597282] rtc_cmos 00:03: registered as rtc0
620[ 0.598052] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
621[ 0.598835] i2c /dev entries driver
622[ 0.599933] i801_smbus 0000:00:1f.3: SPD Write Disable is set
623[ 0.600722] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
624[ 0.603562] IR NEC protocol handler initialized
625[ 0.604311] IR RC5(x/sz) protocol handler initialized
626[ 0.605032] IR RC6 protocol handler initialized
627[ 0.605735] IR JVC protocol handler initialized
628[ 0.606419] IR Sony protocol handler initialized
629[ 0.607093] IR SANYO protocol handler initialized
630[ 0.607765] IR Sharp protocol handler initialized
631[ 0.608432] IR MCE Keyboard/mouse protocol handler initialized
632[ 0.609093] IR XMP protocol handler initialized
633[ 0.609788] usbcore: registered new interface driver uvcvideo
634[ 0.610489] USB Video Class driver (1.1.1)
635[ 0.614850] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
636[ 0.615610] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
637[ 0.616349] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
638[ 0.617328] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
639[ 0.618082] iTCO_vendor_support: vendor-support=0
640[ 0.618837] device-mapper: uevent: version 1.0.3
641[ 0.619731] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
642[ 0.620695] device-mapper: verity-chromeos: dm-verity-chromeos registered
643[ 0.621478] intel_pstate: Intel P-state driver initializing
644[ 0.622402] sdhci: Secure Digital Host Controller Interface driver
645[ 0.624224] sdhci: Copyright(c) Pierre Ossman
646[ 0.626300] ledtrig-cpu: registered to indicate activity on CPUs
647[ 0.628258] EFI Variables Facility v0.08 2004-May-17
648[ 0.633410] hidraw: raw HID events driver (C) Jiri Kosina
649[ 0.635574] usbcore: registered new interface driver usbhid
650[ 0.637073] usbhid: USB HID core driver
651[ 0.637869] ashmem: initialized
652[ 0.638624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
653[ 0.640313] cros_ec_lpcs: unsupported system.
654[ 0.641232] intel_rapl: Found RAPL domain package
655[ 0.641957] intel_rapl: Found RAPL domain core
656[ 0.642672] intel_rapl: Found RAPL domain dram
657[ 0.643385] intel_rapl: RAPL package 0 domain package locked by BIOS
658[ 0.644121] intel_rapl: RAPL package 0 domain dram locked by BIOS
659[ 0.645360] GACT probability on
660[ 0.646360] xt_time: kernel timezone is -0000
661[ 0.647225] Initializing XFRM netlink socket
662[ 0.648164] NET: Registered protocol family 10
663[ 0.649751] Segment Routing with IPv6
664[ 0.650583] NET: Registered protocol family 17
665[ 0.651339] NET: Registered protocol family 15
666[ 0.652164] Key type dns_resolver registered
667[ 0.653430] mce: Using 7 MCE banks
668[ 0.654169] RAS: Correctable Errors collector initialized.
669[ 0.655018] microcode: sig=0x306d4, pf=0x80, revision=0x18
670[ 0.655853] microcode: Microcode Update Driver: v2.2.
671[ 0.655864] AVX2 version of gcm_enc/dec engaged.
672[ 0.657386] AES CTR mode by8 optimization enabled
673[ 0.658697] sched_clock: Marking stable (656637075, 2055856)->(663118428, -4425497)
674[ 0.659711] registered taskstats version 1
675[ 0.660474] Loading compiled-in X.509 certificates
676[ 0.662381] Loaded X.509 cert 'Build time autogenerated kernel key: 5c0bbb459bd78cad9d20299b9d6601ac74559eb7'
677[ 0.664000] zswap: loaded using pool lzo/zbud
678[ 0.665341] Key type big_key registered
679[ 0.666174] Key type trusted registered
680[ 0.667206] Key type encrypted registered
681[ 0.667946] evm: Initialising EVM extended attributes:
682[ 0.668669] evm: security.selinux
683[ 0.669371] evm: security.SMACK64
684[ 0.670058] evm: security.SMACK64EXEC
685[ 0.670736] evm: security.SMACK64TRANSMUTE
686[ 0.671399] evm: security.SMACK64MMAP
687[ 0.672042] evm: security.apparmor
688[ 0.672664] evm: security.capability
689[ 0.673251] evm: HMAC attrs: 0x1
690[ 0.674483] Magic number: 8:425:731
691[ 0.675360] ALSA device list:
692[ 0.675955] No soundcards found.
693[ 0.869351] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
694[ 0.871679] ata1.00: ATA-9: SanDisk SSD i110 64GB, i221000, max UDMA/133
695[ 0.873123] ata1.00: 123091920 sectors, multi 1: LBA48 NCQ (depth 32)
696[ 0.875148] ata1.00: configured for UDMA/133
697[ 0.887352] ahci 0000:00:1f.2: port does not support device sleep
698[ 0.888965] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD i110 000 PQ: 0 ANSI: 5
699[ 0.889764] sd 0:0:0:0: [sda] 123091920 512-byte logical blocks: (63.0 GB/58.7 GiB)
700[ 0.889813] sd 0:0:0:0: Attached scsi generic sg0 type 0
701[ 0.890970] sd 0:0:0:0: [sda] Write Protect is off
702[ 0.892819] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
703[ 0.892831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
704[ 0.897661] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
705[ 0.901585] sd 0:0:0:0: [sda] Attached SCSI disk
706[ 0.905772] usb 1-4: new full-speed USB device number 2 using xhci_hcd
707[ 0.906500] Freeing unused decrypted memory: 2040K
708[ 0.909189] Freeing unused kernel image memory: 1736K
709[ 0.909969] Write protecting the kernel read-only data: 22528k
710[ 0.911621] Freeing unused kernel image memory: 2020K
711[ 0.912564] Freeing unused kernel image memory: 616K
712[ 0.929647] x86/mm: Checked W+X mappings: passed, no W+X pages found.
713[ 0.930306] x86/mm: Checking user space page tables
714[ 0.946740] x86/mm: Checked W+X mappings: passed, no W+X pages found.
715[ 0.947394] Run /init as init process
716[ 1.033067] usb 1-4: New USB device found, idVendor=13d3, idProduct=3472, bcdDevice= 0.01
717[ 1.034786] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
718[ 1.133994] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
719[ 1.148383] usb 2-2: New USB device found, idVendor=0480, idProduct=a008, bcdDevice= 1.00
720[ 1.150182] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
721[ 1.151979] usb 2-2: Product: External USB 3.0
722[ 1.153792] usb 2-2: Manufacturer: TOSHIBA
723[ 1.155610] usb 2-2: SerialNumber: 2135220418F2
724[ 1.160097] usb-storage 2-2:1.0: USB Mass Storage device detected
725[ 1.162232] scsi host4: usb-storage 2-2:1.0
726[ 1.260888] usb 1-5: new full-speed USB device number 3 using xhci_hcd
727[ 1.391184] usb 1-5: New USB device found, idVendor=2808, idProduct=504b, bcdDevice= 3.00
728[ 1.393214] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
729[ 1.395211] usb 1-5: Product: FT5926 MultiTouch
730[ 1.397174] usb 1-5: Manufacturer: Focaltech Systems
731[ 1.402600] hid-generic 0003:2808:504B.0001: hiddev0,hidraw0: USB HID v1.10 Device [Focaltech Systems FT5926 MultiTouch] on usb-0000:00:14.0-5/input0
732[ 1.407498] input: Focaltech Systems FT5926 MultiTouch as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:2808:504B.0002/input/input4
733[ 1.410280] hid-multitouch 0003:2808:504B.0002: input,hidraw1: USB HID v1.10 Device [Focaltech Systems FT5926 MultiTouch] on usb-0000:00:14.0-5/input1
734[ 1.503053] usb 2-3: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
735[ 1.518306] usb 2-3: New USB device found, idVendor=0b05, idProduct=1810, bcdDevice= 1.00
736[ 1.520580] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
737[ 1.522789] usb 2-3: Product: ASM1153
738[ 1.524949] usb 2-3: Manufacturer: asmedia
739[ 1.527062] usb 2-3: SerialNumber: 123456789012
740[ 1.530907] usb-storage 2-3:1.0: USB Mass Storage device detected
741[ 1.533187] scsi host5: usb-storage 2-3:1.0
742[ 1.547887] tsc: Refined TSC clocksource calibration: 997.688 MHz
743[ 1.549569] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc31e211f8, max_idle_ns: 881590440338 ns
744[ 1.551345] clocksource: Switched to clocksource tsc
745[ 1.631885] usb 1-6: new high-speed USB device number 4 using xhci_hcd
746[ 1.793957] usb 1-6: New USB device found, idVendor=04f2, idProduct=b3f2, bcdDevice=69.55
747[ 1.795840] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
748[ 1.796749] usb 1-6: Product: USB2.0 HD UVC WebCam
749[ 1.797641] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
750[ 1.798532] usb 1-6: SerialNumber: 0x0001
751[ 1.802744] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3f2)
752[ 1.810253] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
753[ 1.812357] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
754[ 1.813858] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
755[ 1.928884] usb 1-8: new full-speed USB device number 5 using xhci_hcd
756[ 2.085416] usb 1-8: New USB device found, idVendor=0b05, idProduct=1807, bcdDevice= 0.11
757[ 2.087755] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
758[ 2.090036] usb 1-8: Product: ASUS HID Device
759[ 2.092298] usb 1-8: Manufacturer: ASUS Tech Inc.
760[ 2.105230] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0B05:1807.0003/input/input5
761[ 2.159326] hid-generic 0003:0B05:1807.0003: input,hidraw2: USB HID v1.10 Keyboard [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-8/input0
762[ 2.173629] hid-generic 0003:0B05:1807.0004: ignoring exceeding usage max
763[ 2.176683] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:0B05:1807.0004/input/input6
764[ 2.179005] input: ASUS Tech Inc. ASUS HID Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:0B05:1807.0004/input/input7
765[ 2.191278] scsi 4:0:0:0: Direct-Access TOSHIBA External USB 3.0 AX00 PQ: 0 ANSI: 5
766[ 2.193324] sd 4:0:0:0: Attached scsi generic sg1 type 0
767[ 2.193522] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
768[ 2.195424] sd 4:0:0:0: [sdb] Write Protect is off
769[ 2.196363] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
770[ 2.196559] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
771[ 2.233220] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:0B05:1807.0004/input/input8
772[ 2.236192] input: ASUS Tech Inc. ASUS HID Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:0B05:1807.0004/input/input9
773[ 2.238582] hid-generic 0003:0B05:1807.0004: input,hiddev1,hidraw3: USB HID v1.10 Device [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-8/input1
774[ 2.251201] input: ASUS Tech Inc. ASUS HID Device Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:0B05:1807.0005/input/input10
775[ 2.254715] hid-generic 0003:0B05:1807.0005: input,hiddev2,hidraw4: USB HID v1.10 Mouse [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-8/input2
776[ 2.393146] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12
777[ 2.398520] sd 4:0:0:0: [sdb] Attached SCSI disk
778[ 2.573803] scsi 5:0:0:0: Direct-Access HGST HTS 545050A7E680 0 PQ: 0 ANSI: 6
779[ 2.577366] sd 5:0:0:0: Attached scsi generic sg2 type 0
780[ 2.577598] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
781[ 2.583540] sd 5:0:0:0: [sdc] Write Protect is off
782[ 2.586131] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
783[ 2.586824] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
784[ 2.670969] sdc: sdc1
785[ 2.673644] sd 5:0:0:0: [sdc] Attached SCSI disk
786[ 10.958544] brunch: Scanning device /dev/sda
787[ 11.000679] brunch: Chromeos found on fixed device /dev/sda, keep scanning for removable devices...
788[ 11.004182] brunch: Scanning device /dev/sdb
789[ 11.207146] brunch: Chromeos found on fixed device /dev/sdb, keep scanning for removable devices...
790[ 11.214251] brunch: Scanning device /dev/sdc
791[ 11.262897] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
792[ 11.462185] random: crng init done
793[ 34.166126] brunch: rebuilding Chromeos rootfs not necessary
794[ 41.463438] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
795[ 41.474751] EXT4-fs (sdb3): mounted filesystem without journal. Opts: (null)
796[ 42.045648] audit: type=1404 audit(1581162276.935:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
797[ 42.173042] SELinux: Permission name_connect in class sctp_socket not defined in policy.
798[ 42.173931] SELinux: Permission association in class sctp_socket not defined in policy.
799[ 42.174891] SELinux: Class infiniband_pkey not defined in policy.
800[ 42.175736] SELinux: Class infiniband_endport not defined in policy.
801[ 42.176572] SELinux: Class xdp_socket not defined in policy.
802[ 42.177396] SELinux: the above unknown classes and permissions will be denied
803[ 42.178241] SELinux: policy capability network_peer_controls=1
804[ 42.179066] SELinux: policy capability open_perms=1
805[ 42.179877] SELinux: policy capability extended_socket_class=1
806[ 42.180674] SELinux: policy capability always_check_network=0
807[ 42.181450] SELinux: policy capability cgroup_seclabel=0
808[ 42.182226] SELinux: policy capability nnp_nosuid_transition=1
809[ 42.240779] audit: type=1403 audit(1581162277.130:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
810[ 43.710152] audit: type=1400 audit(1581162278.600:4): avc: granted { execute } for pid=249 comm="sh" name="crash_reporter" dev="sdb3" ino=49269 scontext=u:r:cros_init_scripts:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
811[ 45.113444] udevd[254]: starting version 225
812[ 45.184828] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
813[ 45.762952] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 300
814[ 45.767146] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 305
815[ 45.771390] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 302
816[ 45.775966] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 1000
817[ 45.778360] SafeSetID: insecure policy detected: uid 213 is constrained but transitively unconstrained through uid 301
818[ 46.801147] LoadPin: dev(8,19): writable
819[ 46.803724] LoadPin: load pinning can be disabled.
820[ 46.805431] LoadPin: kernel-module pinned obj="/lib/modules/4.19.79-brunch-sebanc/kernel/drivers/macintosh/mac_hid.ko" pid=292 cmdline="udevd --daemon"
821[ 47.152845] checking generic (e0000000 1d5000) vs hw (e0000000 10000000)
822[ 47.152848] fb0: switching to inteldrmfb from EFI VGA
823[ 47.154551] Console: switching to colour dummy device 80x25
824[ 47.154739] [drm] Replacing VGA console driver
825[ 47.155940] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
826[ 47.155949] [drm] Driver supports precise vblank timestamp query.
827[ 47.156640] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
828[ 47.181396] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 1
829[ 47.183739] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
830[ 47.188253] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
831[ 47.747203] frecon[462]: Frecon using drm driver i915, version 1.6, date(20180921), desc(Intel Graphics) using atomic
832[ 47.751121] frecon[462]: tsm_screen: new screen
833[ 47.751136] frecon[462]: tsm_vte: new vte object
834[ 47.755599] frecon[462]: tsm_screen: new screen
835[ 47.755619] frecon[462]: tsm_vte: new vte object
836[ 47.759738] frecon[462]: tsm_screen: new screen
837[ 47.759756] frecon[462]: tsm_vte: new vte object
838[ 47.763922] frecon[462]: tsm_screen: new screen
839[ 47.763935] frecon[462]: tsm_vte: new vte object
840[ 47.873659] EXT4-fs (sdb1): recovery complete
841[ 47.874289] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: commit=600
842[ 47.985923] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
843[ 48.836612] EXT4-fs (dm-0): 3 orphan inodes deleted
844[ 48.836629] EXT4-fs (dm-0): recovery complete
845[ 48.846153] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard,commit=600
846[ 48.940351] frecon[462]: Frecon using drm driver i915, version 1.6, date(20180921), desc(Intel Graphics) using atomic
847[ 50.062271] EXT4-fs (sdb1): re-mounted. Opts: resgid=20119,commit=600
848[ 50.593948] low_mem: threshold[0] 199 MB
849[ 50.593965] low_mem: threshold[1] 1538 MB
850[ 51.107337] zram: Added device: zram0
851[ 51.180627] zram0: detected capacity change from 0 to 5907193856
852[ 51.659394] Adding 5768740k swap on /dev/zram0. Priority:-2 extents:1 across:5768740k SSFS
853[ 52.479058] systemd-journald[782]: Running without systemd.
854[ 52.715136] systemd-journald[782]: Received request to flush runtime journal from PID 805
855[ 53.278791] tpm tpm0: A TPM error (256) occurred attempting the self test
856[ 53.278813] tpm tpm0: starting up the TPM manually
857[ 53.557445] systemd-journald[782]: File /var/log/journal/00000000000000000000000000000001/system.journal corrupted or uncleanly shut down, renaming and replacing.
858[ 53.875613] cfg80211: Loading compiled-in X.509 certificates for regulatory database
859[ 53.876254] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
860[ 54.000759] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
861[ 54.000837] LoadPin: firmware old-api-denied obj=<unknown> pid=39 cmdline=""
862[ 54.000858] cfg80211: failed to load regulatory.db
863[ 54.891027] ath: phy0: WB335 2-ANT card detected
864[ 54.891043] ath: phy0: Set BT/WLAN RX diversity capability
865[ 54.900377] ath: phy0: Enable LNA combining
866[ 54.901629] ath: phy0: ASPM enabled: 0x43
867[ 54.901633] ath: EEPROM regdomain: 0x6a
868[ 54.901634] ath: EEPROM indicates we should expect a direct regpair map
869[ 54.901636] ath: Country alpha2 being used: 00
870[ 54.901636] ath: Regpair used: 0x6a
871[ 54.902878] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
872[ 54.903978] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffb05880e80000, irq=19
873[ 55.151889] udevd[848]: Process '/usr/sbin/iw dev wlan0 set power_save on' failed with exit code 161.
874[ 55.370109] frecon[462]: DBUS connected after 6.4 seconds
875[ 56.308398] init: cr50-update main process (861) terminated with status 4
876[ 58.111144] init: cr50-metrics main process (1219) terminated with status 1
877[ 60.686834] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
878[ 61.987715] wlan0: authenticate with 10:13:31:6c:58:3f
879[ 62.001173] wlan0: send auth to 10:13:31:6c:58:3f (try 1/3)
880[ 62.003178] wlan0: authenticated
881[ 62.003922] wlan0: associate with 10:13:31:6c:58:3f (try 1/3)
882[ 62.007903] wlan0: RX AssocResp from 10:13:31:6c:58:3f (capab=0x411 status=0 aid=2)
883[ 62.008169] wlan0: associated
884[ 62.085832] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
885[ 73.246179] smpboot: CPU 2 is now offline
886[ 73.259729] smpboot: CPU 3 is now offline
887[ 73.309746] udevd[1428]: Process '/sbin/restorecon -R /sys/devices/system/cpu' failed with exit code 255.
888[ 73.371586] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
889[ 73.371595] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
890[ 73.371599] RAPL PMU: hw unit of domain package 2^-14 Joules
891[ 73.371602] RAPL PMU: hw unit of domain dram 2^-14 Joules
892[ 73.371606] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
893[ 74.152333] init: ureadahead main process (584) killed by TERM signal
894[ 74.322275] init: failsafe-delay main process (857) killed by TERM signal
895[ 74.528728] udevd[1554]: Process '/usr/sbin/iw dev wlan0 set power_save on' failed with exit code 161.
896[ 74.787724] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input13
897[ 75.471892] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
898[ 76.344600] asus_wmi: ASUS WMI generic driver loaded
899[ 76.736379] asus_wmi: Initialization: 0x1
900[ 76.736552] asus_wmi: BIOS WMI version: 7.9
901[ 76.736640] asus_wmi: SFUN value: 0xa0077
902[ 76.738696] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
903[ 76.740317] asus_wmi: Number of fans: 1
904[ 77.994534] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
905[ 78.533212] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
906[ 78.533412] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
907[ 78.533497] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
908[ 78.533571] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
909[ 78.533641] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
910[ 79.469432] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
911[ 79.469445] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
912[ 79.469452] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
913[ 79.469458] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
914[ 79.469463] snd_hda_codec_realtek hdaudioC1D0: inputs:
915[ 79.469468] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
916[ 79.510721] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
917[ 81.269105] CameraModuleThr[1814]: segfault at 8 ip 00007f57045f4cdf sp 00007f56ff7fd1f0 error 4 in usb.so[7f57045ef000+f8000]
918[ 81.269142] Code: 4c 89 ff 89 c3 e8 81 da 0e 00 84 db 74 77 48 8b 95 68 fc ff ff 48 8b 85 90 fc ff ff 48 bb a7 37 bd e9 4d 6f 7a d3 48 8d 0c 52 <48> 8b 7c c8 08 4c 8d 34 c8 48 89 fe 48 2b 34 c8 48 c1 fe 03 48 0f
919[ 81.318501] init: cros-camera main process ended, respawning
920[ 82.001944] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-aesni)"
921[ 82.671066] fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
922[ 85.325723] CameraModuleThr[1872]: segfault at 8 ip 00007a0680fe5cdf sp 00007a0680ed61f0 error 4 in usb.so[7a0680fe0000+f8000]
923[ 85.325741] Code: 4c 89 ff 89 c3 e8 81 da 0e 00 84 db 74 77 48 8b 95 68 fc ff ff 48 8b 85 90 fc ff ff 48 bb a7 37 bd e9 4d 6f 7a d3 48 8d 0c 52 <48> 8b 7c c8 08 4c 8d 34 c8 48 89 fe 48 2b 34 c8 48 c1 fe 03 48 0f
924[ 85.374274] init: cros-camera main process ended, respawning
925[ 88.424567] CameraModuleThr[1932]: segfault at 8 ip 0000787f11da7cdf sp 0000787f11c981f0 error 4 in usb.so[787f11da2000+f8000]
926[ 88.424584] Code: 4c 89 ff 89 c3 e8 81 da 0e 00 84 db 74 77 48 8b 95 68 fc ff ff 48 8b 85 90 fc ff ff 48 bb a7 37 bd e9 4d 6f 7a d3 48 8d 0c 52 <48> 8b 7c c8 08 4c 8d 34 c8 48 89 fe 48 2b 34 c8 48 c1 fe 03 48 0f
927[ 88.471296] init: cros-camera main process ended, respawning
928[ 91.527486] CameraModuleThr[2017]: segfault at 8 ip 00007cbd38057cdf sp 00007cbd33f421f0 error 4 in usb.so[7cbd38052000+f8000]
929[ 91.527503] Code: 4c 89 ff 89 c3 e8 81 da 0e 00 84 db 74 77 48 8b 95 68 fc ff ff 48 8b 85 90 fc ff ff 48 bb a7 37 bd e9 4d 6f 7a d3 48 8d 0c 52 <48> 8b 7c c8 08 4c 8d 34 c8 48 89 fe 48 2b 34 c8 48 c1 fe 03 48 0f
930[ 91.568269] init: cros-camera main process ended, respawning
931[ 94.666487] CameraModuleThr[2076]: segfault at 8 ip 000079ddbacfdcdf sp 000079ddbabee1f0 error 4 in usb.so[79ddbacf8000+f8000]
932[ 94.666507] Code: 4c 89 ff 89 c3 e8 81 da 0e 00 84 db 74 77 48 8b 95 68 fc ff ff 48 8b 85 90 fc ff ff 48 bb a7 37 bd e9 4d 6f 7a d3 48 8d 0c 52 <48> 8b 7c c8 08 4c 8d 34 c8 48 89 fe 48 2b 34 c8 48 c1 fe 03 48 0f
933[ 94.718100] EXT4-fs (sda1): recovery complete
934[ 94.718121] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
935[ 94.724995] init: cros-camera main process ended, respawning
936[ 95.559920] EXT4-fs (sda5): couldn't mount RDWR because of unsupported optional features (ff000000)
937[ 95.562156] EXT4-fs (sda5): bad geometry: block count 588800 exceeds size of device (512 blocks)
938[ 97.780128] CameraModuleThr[2111]: segfault at 8 ip 00007b8fc2b8bcdf sp 00007b8fc2a7c1f0 error 4 in usb.so[7b8fc2b86000+f8000]
939[ 97.780144] Code: 4c 89 ff 89 c3 e8 81 da 0e 00 84 db 74 77 48 8b 95 68 fc ff ff 48 8b 85 90 fc ff ff 48 bb a7 37 bd e9 4d 6f 7a d3 48 8d 0c 52 <48> 8b 7c c8 08 4c 8d 34 c8 48 89 fe 48 2b 34 c8 48 c1 fe 03 48 0f
940[ 97.827287] init: cros-camera respawning too fast, stopped
941[ 106.718272] frecon[462]: Frecon using drm driver i915, version 1.6, date(20180921), desc(Intel Graphics) using atomic
942[ 108.368761] cgroup: run_oci (1588) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
943[ 108.368789] cgroup: "memory" requires setting use_hierarchy to 1 on the root
944[ 108.782150] EXT4-fs (sdb1): re-mounted. Opts:
945[ 110.525197] binder: 2261:2261 transaction failed 29189/-22, size 0-0 line 3025
946[ 110.608217] binder: 2253:2253 ioctl 4018620d 7ffc09d0bba0 returned -22
947[ 122.583337] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
948[ 123.083555] ESDFS-fs (esdfs): mounted on top of /opt/google/containers/android/rootfs/android-data/data/media type ext4
949[ 123.084419] ESDFS-fs (esdfs): mounted on top of /opt/google/containers/android/rootfs/android-data/data/media type ext4
950[ 123.086572] ESDFS-fs (esdfs): mounted on top of /opt/google/containers/android/rootfs/android-data/data/media type ext4
951[ 123.553896] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0B05:1807.0003/input/input21
952[ 123.610878] asus 0003:0B05:1807.0003: input,hidraw2: USB HID v1.10 Keyboard [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-8/input0
953[ 123.640957] asus 0003:0B05:1807.0004: ignoring exceeding usage max
954[ 123.643851] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:0B05:1807.0004/input/input22
955[ 123.697551] asus 0003:0B05:1807.0004: input,hiddev1,hidraw3: USB HID v1.10 Device [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-8/input1
956[ 123.704195] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:0B05:1807.0005/input/input23
957[ 123.705983] asus 0003:0B05:1807.0005: input,hiddev2,hidraw4: USB HID v1.10 Mouse [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-8/input2
958[ 123.965550] Bluetooth: af_bluetooth.c:bt_init() Core ver 2.22
959[ 123.965965] NET: Registered protocol family 31
960[ 123.965973] Bluetooth: af_bluetooth.c:bt_init() HCI device and connection manager initialized
961[ 123.965980] Bluetooth: hci_le_splitter.c:hci_le_splitter_sysfs_init() Initializing LE splitter sysfs
962[ 123.966708] Bluetooth: hci_sock.c:hci_sock_init() HCI socket layer initialized
963[ 123.966719] Bluetooth: l2cap_sock.c:l2cap_init_sockets() L2CAP socket layer initialized
964[ 123.966759] Bluetooth: sco.c:sco_init() SCO socket layer initialized
965[ 124.229218] usbcore: registered new interface driver btusb
966[ 124.272640] IPv6: ADDRCONF(NETDEV_UP): veth_wlan0: link is not ready
967[ 124.278081] arc_wlan0: port 1(veth_wlan0) entered blocking state
968[ 124.278109] arc_wlan0: port 1(veth_wlan0) entered disabled state
969[ 124.278429] device veth_wlan0 entered promiscuous mode
970[ 124.291613] wlan0: renamed from peer_wlan0
971[ 124.297898] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
972[ 124.298150] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
973[ 124.298209] IPv6: ADDRCONF(NETDEV_CHANGE): veth_wlan0: link becomes ready
974[ 124.298257] arc_wlan0: port 1(veth_wlan0) entered blocking state
975[ 124.298264] arc_wlan0: port 1(veth_wlan0) entered forwarding state
976[ 124.358422] IPv6: ADDRCONF(NETDEV_UP): veth_arc0: link is not ready
977[ 124.370222] arcbr0: port 1(veth_arc0) entered blocking state
978[ 124.370498] arcbr0: port 1(veth_arc0) entered disabled state
979[ 124.371581] device veth_arc0 entered promiscuous mode
980[ 124.374115] arcbr0: port 1(veth_arc0) entered blocking state
981[ 124.374127] arcbr0: port 1(veth_arc0) entered forwarding state
982[ 124.390129] arc0: renamed from peer_arc0
983[ 124.399138] IPv6: ADDRCONF(NETDEV_CHANGE): veth_arc0: link becomes ready
984[ 124.422229] usbcore: registered new interface driver ath3k
985[ 124.422638] usb 1-4: USB disconnect, device number 2
986[ 124.674791] usb 1-4: new full-speed USB device number 6 using xhci_hcd
987[ 125.592339] usbcore: deregistering interface driver btusb
988[ 125.606004] usbcore: registered new interface driver btusb
989[ 126.157915] init: send-boot-metrics main process (2933) terminated with status 1
990[ 127.482138] wlan0: authenticate with 10:13:31:6c:58:3f
991[ 127.499159] wlan0: send auth to 10:13:31:6c:58:3f (try 1/3)
992[ 127.501426] wlan0: authenticated
993[ 127.502808] wlan0: associate with 10:13:31:6c:58:3f (try 1/3)
994[ 127.506728] wlan0: RX AssocResp from 10:13:31:6c:58:3f (capab=0x411 status=0 aid=2)
995[ 127.506969] wlan0: associated
996[ 128.380426] [2680] netd: blocked syscall 321
997[ 130.251024] usb 1-4: New USB device found, idVendor=13d3, idProduct=3472, bcdDevice= 0.02
998[ 130.251048] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
999[ 130.256362] usb 1-4: GPIO lookup for consumer reset
1000[ 130.256365] usb 1-4: using ACPI for GPIO lookup
1001[ 130.256368] acpi device:57: GPIO: looking up reset-gpios
1002[ 130.256370] acpi device:57: GPIO: looking up reset-gpio
1003[ 130.256372] usb 1-4: using lookup tables for GPIO lookup
1004[ 130.256373] usb 1-4: No GPIO consumer reset found
1005[ 130.256642] le_splitter HCI splitter inited
1006[ 130.355694] ------------[ cut here ]------------
1007[ 130.355711] Disabling Bluetooth due to unsupported HCI Read Encryption Key Size command
1008[ 130.355794] WARNING: CPU: 1 PID: 499 at net/bluetooth/hci_core.c:1603 hci_dev_do_open+0x4b2/0x739 [bluetooth]
1009[ 130.355815] Modules linked in: uinput btusb btmrvl_sdio btmrvl veth ath3k btrtl btbcm btintel bluetooth bridge hid_asus ecdh_generic stp llc nf_nat_tftp snd_hda_codec_realtek nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp snd_hda_codec_generic esp6 snd_hda_codec_hdmi ah6 xfrm6_mode_tunnel xfrm6_mode_transport xfrm4_mode_tunnel snd_hda_intel xfrm4_mode_transport ip6t_REJECT ip6t_ipv6header snd_hda_codec mei_me asus_nb_wmi bmc150_accel_spi snd_hda_core bmc150_accel_i2c mei asus_wmi bmc150_accel_core industrialio_triggered_buffer acpi_pad kfifo_buf sparse_keymap serio_raw dw_dmac dw_dmac_core ipt_MASQUERADE industrialio snd_hwdep asus_wireless intel_powerclamp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel kvm_intel intel_cstate intel_rapl_perf ccm ath9k ath9k_common ath9k_hw ath mac80211 cfg80211
1010[ 130.355965] zram i915 cec input_leds joydev mac_hid [last unloaded: btusb]
1011[ 130.355989] CPU: 1 PID: 499 Comm: kworker/u9:1 Not tainted 4.19.79-brunch-sebanc #1
1012[ 130.355999] Hardware name: ASUSTeK COMPUTER INC. T300FA/T300FA, BIOS T300FA.214 09/01/2015
1013[ 130.356042] Workqueue: hci0 hci_power_on [bluetooth]
1014[ 130.356080] RIP: 0010:hci_dev_do_open+0x4b2/0x739 [bluetooth]
1015[ 130.356091] Code: c4 2f 5b d0 41 89 c4 f0 80 63 50 fd 45 85 e4 0f 85 d3 01 00 00 f6 83 bd 02 00 00 10 75 19 48 c7 c7 1a 7f 89 c0 e8 96 3a 88 cf <0f> 0b 41 bc fb ff ff ff e9 b1 01 00 00 48 89 df e8 98 a3 03 00 41
1016[ 130.356110] RSP: 0018:ffffb05880cdfdf0 EFLAGS: 00010286
1017[ 130.356121] RAX: 0000000000000000 RBX: ffff94a1eabac000 RCX: 0000000000000007
1018[ 130.356131] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffff94a29aa95610
1019[ 130.356141] RBP: ffffb05880cdfe40 R08: 000000000000004b R09: 0000000000020e80
1020[ 130.356151] R10: ffffb05880cdfd80 R11: 00000020a27f3344 R12: 0000000000000000
1021[ 130.356160] R13: ffff94a1eabac698 R14: ffff94a1eabacaa8 R15: 0000000000000000
1022[ 130.356172] FS: 0000000000000000(0000) GS:ffff94a29aa80000(0000) knlGS:0000000000000000
1023[ 130.356183] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
1024[ 130.356192] CR2: 00007e0878e6e000 CR3: 00000000d0e12001 CR4: 00000000003606e0
1025[ 130.356202] Call Trace:
1026[ 130.356218] ? __switch_to_asm+0x35/0x70
1027[ 130.356228] ? __switch_to_asm+0x41/0x70
1028[ 130.356240] ? _raw_spin_unlock_irq+0x13/0x23
1029[ 130.356276] hci_power_on+0xb7/0x1e6 [bluetooth]
1030[ 130.356289] process_one_work+0x1ad/0x2b9
1031[ 130.356299] worker_thread+0x19d/0x259
1032[ 130.356308] ? process_scheduled_works+0x33/0x33
1033[ 130.356319] kthread+0x102/0x10a
1034[ 130.356330] ? kthread_associate_blkcg+0xae/0xae
1035[ 130.356341] ret_from_fork+0x35/0x40
1036[ 130.356353] ---[ end trace c627d8862478ff81 ]---
1037[ 130.356462] le_splitter HCI splitter unregistered