· 6 years ago · Dec 14, 2019, 11:28 PM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
2[ 0.000000] Linux version 5.3.0-1014-raspi2 (buildd@bos02-arm64-074) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #16-Ubuntu SMP Tue Nov 26 11:18:23 UTC 2019 (Ubuntu 5.3.0-1014.16-raspi2 5.3.10)
3[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
4[ 0.000000] efi: Getting EFI parameters from FDT:
5[ 0.000000] efi: UEFI not found.
6[ 0.000000] cma: Reserved 8 MiB at 0x000000003ac00000
7[ 0.000000] On node 0 totalpages: 242688
8[ 0.000000] DMA32 zone: 3792 pages used for memmap
9[ 0.000000] DMA32 zone: 0 pages reserved
10[ 0.000000] DMA32 zone: 242688 pages, LIFO batch:63
11[ 0.000000] percpu: Embedded 32 pages/cpu s91608 r8192 d31272 u131072
12[ 0.000000] pcpu-alloc: s91608 r8192 d31272 u131072 alloc=32*4096
13[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
14[ 0.000000] Detected VIPT I-cache on CPU0
15[ 0.000000] CPU features: detected: ARM erratum 845719
16[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
17[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
18[ 0.000000] CPU features: detected: ARM erratum 843419
19[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
20[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc
21[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
22[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
23[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
24[ 0.000000] Memory: 887364K/970752K available (11772K kernel code, 1256K rwdata, 4112K rodata, 4096K init, 1074K bss, 75196K reserved, 8192K cma-reserved)
25[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x38/0x3d8 with crng_init=0
26[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
27[ 0.000000] ftrace: allocating 38024 entries in 149 pages
28[ 0.000000] rcu: Hierarchical RCU implementation.
29[ 0.000000] Tasks RCU enabled.
30[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
31[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
32[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
33[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
34[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
35[ 0.000259] Console: colour dummy device 80x25
36[ 0.000767] printk: console [tty1] enabled
37[ 0.000845] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
38[ 0.000890] pid_max: default: 32768 minimum: 301
39[ 0.001230] LSM: Security Framework initializing
40[ 0.001308] Yama: becoming mindful.
41[ 0.001441] AppArmor: AppArmor initialized
42[ 0.001725] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
43[ 0.001781] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
44[ 0.002772] *** VALIDATE proc ***
45[ 0.003347] Disabling memory control group subsystem
46[ 0.003454] *** VALIDATE cgroup1 ***
47[ 0.003483] *** VALIDATE cgroup2 ***
48[ 0.005370] ASID allocator initialised with 32768 entries
49[ 0.005633] rcu: Hierarchical SRCU implementation.
50[ 0.008432] EFI services will not be available.
51[ 0.009545] smp: Bringing up secondary CPUs ...
52[ 0.010855] Detected VIPT I-cache on CPU1
53[ 0.010928] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
54[ 0.012915] Detected VIPT I-cache on CPU2
55[ 0.012970] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
56[ 0.014749] Detected VIPT I-cache on CPU3
57[ 0.014798] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
58[ 0.015309] smp: Brought up 1 node, 4 CPUs
59[ 0.015429] SMP: Total of 4 processors activated.
60[ 0.015456] CPU features: detected: 32-bit EL0 Support
61[ 0.015484] CPU features: detected: CRC32 instructions
62[ 0.019054] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
63[ 0.019093] CPU: All CPU(s) started at EL2
64[ 0.019213] alternatives: patching kernel code
65[ 0.023292] devtmpfs: initialized
66[ 0.037777] Enabled cp15_barrier support
67[ 0.037835] Enabled setend support
68[ 0.038521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
69[ 0.038578] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
70[ 0.039574] pinctrl core: initialized pinctrl subsystem
71[ 0.040538] DMI not present or invalid.
72[ 0.041489] NET: Registered protocol family 16
73[ 0.046591] audit: initializing netlink subsys (disabled)
74[ 0.047030] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
75[ 0.047864] cpuidle: using governor ladder
76[ 0.047932] cpuidle: using governor menu
77[ 0.048588] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
78[ 0.052071] DMA: preallocated 1024 KiB pool for atomic allocations
79[ 0.052445] Serial: AMBA PL011 UART driver
80[ 0.057735] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
81[ 0.125939] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
82[ 0.130318] SCSI subsystem initialized
83[ 0.130694] libata version 3.00 loaded.
84[ 0.130972] usbcore: registered new interface driver usbfs
85[ 0.131091] usbcore: registered new interface driver hub
86[ 0.131253] usbcore: registered new device driver usb
87[ 0.131777] pps_core: LinuxPPS API ver. 1 registered
88[ 0.131805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
89[ 0.131856] PTP clock support registered
90[ 0.132271] EDAC MC: Ver: 3.0.0
91[ 0.139281] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start
92[ 0.143291] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3
93[ 0.149174] NetLabel: Initializing
94[ 0.149205] NetLabel: domain hash size = 128
95[ 0.149227] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
96[ 0.149340] NetLabel: unlabeled traffic allowed by default
97[ 0.150566] clocksource: Switched to clocksource arch_sys_counter
98[ 0.283289] VFS: Disk quotas dquot_6.6.0
99[ 0.283453] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
100[ 0.284464] AppArmor: AppArmor Filesystem Enabled
101[ 0.284907] simple-framebuffer 3e513000.framebuffer: framebuffer at 0x3e513000, 0x6d8c00 bytes, mapped to 0x(____ptrval____)
102[ 0.284952] simple-framebuffer 3e513000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
103[ 0.315349] Console: switching to colour frame buffer device 228x61
104[ 0.343036] simple-framebuffer 3e513000.framebuffer: fb0: simplefb registered!
105[ 0.356685] thermal_sys: Registered thermal governor 'fair_share'
106[ 0.356694] thermal_sys: Registered thermal governor 'bang_bang'
107[ 0.356900] thermal_sys: Registered thermal governor 'step_wise'
108[ 0.357076] thermal_sys: Registered thermal governor 'user_space'
109[ 0.357251] thermal_sys: Registered thermal governor 'power_allocator'
110[ 0.358205] NET: Registered protocol family 2
111[ 0.359464] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
112[ 0.359739] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
113[ 0.360070] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
114[ 0.360489] TCP: Hash tables configured (established 8192 bind 8192)
115[ 0.360945] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
116[ 0.361181] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
117[ 0.361742] NET: Registered protocol family 1
118[ 0.361908] NET: Registered protocol family 44
119[ 0.362056] PCI: CLS 0 bytes, default 64
120[ 0.362524] Trying to unpack rootfs image as initramfs...
121[ 1.387551] Freeing initrd memory: 28300K
122[ 1.389388] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
123[ 1.389801] kvm [1]: IPA Size Limit: 40bits
124[ 1.391246] kvm [1]: Hyp mode initialized successfully
125[ 1.396228] Initialise system trusted keyrings
126[ 1.396464] Key type blacklist registered
127[ 1.396967] workingset: timestamp_bits=46 max_order=18 bucket_order=0
128[ 1.407110] zbud: loaded
129[ 1.410523] squashfs: version 4.0 (2009/01/31) Phillip Lougher
130[ 1.412233] fuse: init (API version 7.31)
131[ 1.451852] Key type asymmetric registered
132[ 1.452015] Asymmetric key parser 'x509' registered
133[ 1.452254] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
134[ 1.452838] io scheduler mq-deadline registered
135[ 1.466180] bcm2708_fb soc:fb: FB found 1 display(s)
136[ 1.475342] cma: cma_alloc: alloc failed, req-size: 1753 pages, ret: -12
137[ 1.482589] WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:4702 __alloc_pages_nodemask+0x284/0x2c8
138[ 1.489835] Modules linked in:
139[ 1.497013] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-1014-raspi2 #16-Ubuntu
140[ 1.504283] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
141[ 1.511581] pstate: 20400005 (nzCv daif +PAN -UAO)
142[ 1.518894] pc : __alloc_pages_nodemask+0x284/0x2c8
143[ 1.526165] lr : __dma_direct_alloc_pages+0x100/0x1e8
144[ 1.533355] sp : ffff0000100238a0
145[ 1.540431] x29: ffff0000100238a0 x28: 0000000000000000
146[ 1.547462] x27: fffff85ff9348580 x26: fffff85ff8448080
147[ 1.554487] x25: 0000000000000000 x24: 00000000006d9000
148[ 1.561539] x23: fffff85ff9330c10 x22: 0000000000000000
149[ 1.568566] x21: fffff85ff91c5880 x20: 000000000000000b
150[ 1.575523] x19: 0000000000000cc4 x18: 0000000000000010
151[ 1.582435] x17: ffff000010ec8b98 x16: 0000000000000000
152[ 1.589271] x15: 0000000000000020 x14: 0000000000001c80
153[ 1.596044] x13: 0000000000000001 x12: 00000000ffffffff
154[ 1.602719] x11: fffff85ff844fcf0 x10: fffff85ff844fcf0
155[ 1.609338] x9 : 00000000ffaaaaaa x8 : 0000000000000088
156[ 1.615884] x7 : 0000000000000000 x6 : 0000000000000000
157[ 1.622310] x5 : ffff3c4550409000 x4 : ffff000010024000
158[ 1.628633] x3 : 0000000000000000 x2 : 0000000000000000
159[ 1.634874] x1 : 0000000000000000 x0 : ffff3c454ef7ac50
160[ 1.641016] Call trace:
161[ 1.647042] __alloc_pages_nodemask+0x284/0x2c8
162[ 1.653175] __dma_direct_alloc_pages+0x100/0x1e8
163[ 1.659371] arch_dma_alloc+0xec/0x1a8
164[ 1.665592] dma_direct_alloc+0x54/0x98
165[ 1.671841] dma_alloc_attrs+0x84/0xf0
166[ 1.678018] bcm2708_fb_set_par+0x114/0x388
167[ 1.684110] bcm2708_fb_probe+0x3dc/0x670
168[ 1.690079] platform_drv_probe+0x58/0xa8
169[ 1.695977] really_probe+0xe8/0x3e0
170[ 1.701788] driver_probe_device+0xe4/0x138
171[ 1.707550] device_driver_attach+0x74/0x80
172[ 1.713248] __driver_attach+0xac/0x178
173[ 1.718868] bus_for_each_dev+0x80/0xd0
174[ 1.724525] driver_attach+0x30/0x40
175[ 1.730179] bus_add_driver+0x144/0x220
176[ 1.735803] driver_register+0x64/0x110
177[ 1.741365] __platform_driver_register+0x54/0x60
178[ 1.746899] bcm2708_fb_init+0x20/0x28
179[ 1.752338] do_one_initcall+0x50/0x228
180[ 1.757747] kernel_init_freeable+0x1fc/0x2a0
181[ 1.763145] kernel_init+0x18/0x104
182[ 1.768499] ret_from_fork+0x10/0x1c
183[ 1.773796] ---[ end trace 44756b3fcaaa1ce4 ]---
184[ 1.779973] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
185[ 1.871909] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
186[ 1.880177] bcm2835-rng 3f104000.rng: hwrng registered
187[ 1.886401] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
188[ 1.893011] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
189[ 1.899064] cacheinfo: Unable to detect cache hierarchy for CPU 0
190[ 2.393971] loop: module loaded
191[ 2.402812] spi-bcm2835 3f204000.spi: could not get clk: -517
192[ 2.409349] libphy: Fixed MDIO Bus: probed
193[ 2.414875] tun: Universal TUN/TAP device driver, 1.6
194[ 2.420536] PPP generic driver version 2.4.2
195[ 2.426190] usbcore: registered new interface driver lan78xx
196[ 2.431609] usbcore: registered new interface driver smsc95xx
197[ 2.436900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
198[ 2.442235] ehci-pci: EHCI PCI platform driver
199[ 2.447572] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
200[ 2.452921] ohci-pci: OHCI PCI platform driver
201[ 2.458288] uhci_hcd: USB Universal Host Controller Interface driver
202[ 2.463881] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
203[ 2.683407] Core Release: 2.80a
204[ 2.688877] Setting default values for core params
205[ 2.694439] Finished setting default values for core params
206[ 2.913661] Using Buffer DMA mode
207[ 2.919282] Periodic Transfer Interrupt Enhancement - disabled
208[ 2.925009] Multiprocessor Interrupt Enhancement - disabled
209[ 2.930820] OTG VER PARAM: 0, OTG VER FLAG: 0
210[ 2.936664] Dedicated Tx FIFOs mode
211[ 2.943195] WARN::dwc_otg_hcd_init:1043: FIQ DMA bounce buffers: virt = ffff000010601000 dma = 0x00000000fad10000 len=9024
212[ 2.949378] FIQ FSM acceleration enabled for :
213 Non-periodic Split Transactions
214 Periodic Split Transactions
215 High-Speed Isochronous Endpoints
216 Interrupt/Control Split Transaction hack enabled
217[ 2.979961] dwc_otg: Microframe scheduler enabled
218[ 2.980011] WARN::hcd_init_fiq:496: MPHI regs_base at ffff00001007d000
219[ 2.986343] dwc_otg 3f980000.usb: DWC OTG Controller
220[ 2.992637] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
221[ 2.999051] dwc_otg 3f980000.usb: irq 9, io mem 0x00000000
222[ 3.005444] Init: Port Power? op_state=1
223[ 3.011798] Init: Power Port (0)
224[ 3.018508] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
225[ 3.025064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
226[ 3.031654] usb usb1: Product: DWC OTG Controller
227[ 3.038241] usb usb1: Manufacturer: Linux 5.3.0-1014-raspi2 dwc_otg_hcd
228[ 3.044918] usb usb1: SerialNumber: 3f980000.usb
229[ 3.052442] hub 1-0:1.0: USB hub found
230[ 3.059177] hub 1-0:1.0: 1 port detected
231[ 3.066757] dwc_otg: FIQ enabled
232[ 3.066767] dwc_otg: NAK holdoff enabled
233[ 3.066776] dwc_otg: FIQ split-transaction FSM enabled
234[ 3.066791] Module dwc_common_port init
235[ 3.067604] mousedev: PS/2 mouse device common for all mice
236[ 3.075018] i2c /dev entries driver
237[ 3.084946] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
238[ 3.092096] device-mapper: uevent: version 1.0.3
239[ 3.099409] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
240[ 3.106672] bcm2835-cpufreq: min=600000 max=1200000
241[ 3.116100] sdhci: Secure Digital Host Controller Interface driver
242[ 3.119800] sdhci: Copyright(c) Pierre Ossman
243[ 3.123876] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
244[ 3.127948] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
245[ 3.131806] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
246[ 3.135534] sdhci-pltfm: SDHCI platform and OF driver helper
247[ 3.140836] ledtrig-cpu: registered to indicate activity on CPUs
248[ 3.144697] hidraw: raw HID events driver (C) Jiri Kosina
249[ 3.149267] vchiq: vchiq_init_state: slot_zero = (____ptrval____)
250[ 3.156625] NET: Registered protocol family 10
251[ 3.199117] Segment Routing with IPv6
252[ 3.202922] NET: Registered protocol family 17
253[ 3.206775] Key type dns_resolver registered
254[ 3.211304] registered taskstats version 1
255[ 3.214962] Loading compiled-in X.509 certificates
256[ 3.227659] Loaded X.509 cert 'Build time autogenerated kernel key: 8144f04615d9883809ff2bd5f3b7fdc3bbd2a910'
257[ 3.231646] zswap: loaded using pool lzo/zbud
258[ 3.267858] cryptd: max_cpu_qlen set to 1000
259[ 3.270727] Indeed it is in host mode hprt0 = 00021501
260[ 3.356938] random: fast init done
261[ 3.463608] Key type big_key registered
262[ 3.467394] usb 1-1: new high-speed USB device number 2 using dwc_otg
263[ 3.471234] Indeed it is in host mode hprt0 = 00001101
264[ 3.520200] Key type encrypted registered
265[ 3.523983] AppArmor: AppArmor sha1 policy hashing enabled
266[ 3.527671] ima: No TPM chip found, activating TPM-bypass!
267[ 3.531374] ima: Allocated hash algorithm: sha1
268[ 3.535059] No architecture policies found
269[ 3.538778] evm: Initialising EVM extended attributes:
270[ 3.542390] evm: security.selinux
271[ 3.546024] evm: security.SMACK64
272[ 3.549547] evm: security.SMACK64EXEC
273[ 3.552969] evm: security.SMACK64TRANSMUTE
274[ 3.556375] evm: security.SMACK64MMAP
275[ 3.559727] evm: security.apparmor
276[ 3.563087] evm: security.ima
277[ 3.566396] evm: security.capability
278[ 3.569689] evm: HMAC attrs: 0x1
279[ 3.578713] uart-pl011 3f201000.serial: cts_event_workaround enabled
280[ 3.582143] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2
281[ 3.588255] printk: console [ttyS0] disabled
282[ 3.591755] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
283[ 3.697264] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
284[ 3.707445] printk: console [ttyS0] enabled
285[ 3.708144] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
286[ 3.716228] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
287[ 3.729991] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
288[ 3.776012] hub 1-1:1.0: USB hub found
289[ 3.787498] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
290[ 3.815963] hub 1-1:1.0: 5 ports detected
291[ 3.854359] sdhost: log_buf @ (____ptrval____) (eff1e000)
292[ 4.286573] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
293[ 4.358351] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
294[ 4.494971] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
295[ 4.505686] hctosys: unable to open rtc device (rtc0)
296[ 4.513723] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
297[ 4.521678] of_cfs_init
298[ 4.540245] smsc95xx v1.0.6
299[ 4.555131] of_cfs_init: OK
300[ 4.589444] mmc0: host does not support reading read-only switch, assuming write-enable
301[ 4.907484] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:10:fd:fd
302[ 4.937090] mmc0: new high speed SDHC card at address 0007
303[ 5.038569] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
304[ 5.044733] mmcblk0: mmc0:0007 SD08G 7.42 GiB
305[ 5.223091] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.09
306[ 5.235586] mmcblk0: p1 p2
307[ 5.242464] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
308[ 5.366667] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
309[ 5.374865] usb 1-1.4: Product: USB Receiver
310[ 5.425615] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
311[ 5.431591] usb 1-1.4: Manufacturer: Logitech
312[ 5.698570] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
313[ 5.737259] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
314[ 5.924897] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=5401, bcdDevice= 1.26
315[ 6.003807] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
316[ 6.010592] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
317[ 6.010599] usb 1-1.5: Product: USB3.0 Hub
318[ 6.404588] usb 1-1.5: Manufacturer: Realtek
319[ 6.412904] hub 1-1.5:1.0: USB hub found
320[ 6.420589] Freeing unused kernel memory: 4096K
321[ 6.429592] hub 1-1.5:1.0: 4 ports detected
322[ 6.438186] Checked W+X mappings: passed, no W+X pages found
323[ 6.447784] Run /init as init process
324[ 6.552078] mmc1: new high speed SDIO card at address 0001
325[ 6.564704] random: systemd-udevd: uninitialized urandom read (16 bytes read)
326[ 6.574146] random: udevadm: uninitialized urandom read (16 bytes read)
327[ 6.579989] random: systemd-udevd: uninitialized urandom read (16 bytes read)
328[ 6.750608] usb 1-1.5.1: new high-speed USB device number 6 using dwc_otg
329[ 6.865261] usb 1-1.5.1: New USB device found, idVendor=2040, idProduct=b123, bcdDevice=40.01
330[ 6.878243] usb 1-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
331[ 6.890150] usb 1-1.5.1: Product: Hauppauge Device
332[ 6.899260] usb 1-1.5.1: Manufacturer: Hauppauge
333[ 6.908186] usb 1-1.5.1: SerialNumber: 4036125389
334[ 7.334333] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
335[ 7.429111] usbcore: registered new interface driver usbhid
336[ 7.439220] usbhid: USB HID core driver
337[ 7.580636] random: crng init done
338[ 7.589200] random: 7 urandom warning(s) missed due to ratelimiting
339[ 8.684778] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0
340[ 8.758976] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.4/input0
341[ 8.778342] input: Logitech USB Receiver Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1
342[ 8.796207] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input2
343[ 8.874862] input: Logitech USB Receiver System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input3
344[ 8.893575] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.4/input1
345[ 8.913365] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.4/input2
346[ 9.087592] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.4/input2
347[ 9.230649] input: Logitech Unifying Device. Wireless PID:405e Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input5
348[ 9.253387] input: Logitech Unifying Device. Wireless PID:405e Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input6
349[ 9.275608] input: Logitech Unifying Device. Wireless PID:405e Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input7
350[ 9.298739] input: Logitech Unifying Device. Wireless PID:405e System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input8
351[ 9.321608] hid-generic 0003:046D:405E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:405e] on usb-3f980000.usb-1.4/input2:1
352[ 9.350791] input: Logitech K850 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4062.0005/input/input12
353[ 9.406990] logitech-hidpp-device 0003:046D:4062.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K850] on usb-3f980000.usb-1.4/input2:2
354[ 9.538737] input: Logitech M720 Triathlon as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:405E.0004/input/input13
355[ 9.559113] logitech-hidpp-device 0003:046D:405E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-3f980000.usb-1.4/input2:1
356[ 11.106561] raid6: neonx8 gen() 1421 MB/s
357[ 11.162552] raid6: neonx8 xor() 1375 MB/s
358[ 11.218555] raid6: neonx4 gen() 1442 MB/s
359[ 11.274569] raid6: neonx4 xor() 1377 MB/s
360[ 11.330562] raid6: neonx2 gen() 1036 MB/s
361[ 11.386551] raid6: neonx2 xor() 1054 MB/s
362[ 11.442594] raid6: neonx1 gen() 588 MB/s
363[ 11.498587] raid6: neonx1 xor() 629 MB/s
364[ 11.554548] raid6: int64x8 gen() 1114 MB/s
365[ 11.610559] raid6: int64x8 xor() 728 MB/s
366[ 11.666557] raid6: int64x4 gen() 938 MB/s
367[ 11.722589] raid6: int64x4 xor() 678 MB/s
368[ 11.778607] raid6: int64x2 gen() 565 MB/s
369[ 11.834553] raid6: int64x2 xor() 486 MB/s
370[ 11.890592] raid6: int64x1 gen() 316 MB/s
371[ 11.946571] raid6: int64x1 xor() 296 MB/s
372[ 11.955864] raid6: using algorithm neonx4 gen() 1442 MB/s
373[ 11.966236] raid6: .... xor() 1377 MB/s, rmw enabled
374[ 11.976161] raid6: using neon recovery algorithm
375[ 11.993193] xor: measuring software checksum speed
376[ 12.042553] 8regs : 2344.000 MB/sec
377[ 12.090548] 32regs : 2688.000 MB/sec
378[ 12.138547] arm64_neon: 2325.000 MB/sec
379[ 12.147560] xor: using function: 32regs (2688.000 MB/sec)
380[ 12.161752] async_tx: api initialized (async)
381[ 12.449698] Btrfs loaded, crc32c=crc32c-generic
382[ 12.838443] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
383[ 13.908593] systemd[1]: Inserted module 'autofs4'
384[ 14.018785] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
385[ 14.051809] systemd[1]: Detected architecture arm64.
386[ 14.164556] systemd[1]: Set hostname to <tvheadend>.
387[ 14.177275] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
388[ 15.226472] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
389[ 15.499410] systemd[1]: Created slice system-serial\x2dgetty.slice.
390[ 15.517350] systemd[1]: Listening on initctl Compatibility Named Pipe.
391[ 15.535692] systemd[1]: Listening on Journal Audit Socket.
392[ 15.552176] systemd[1]: Listening on fsck to fsckd communication Socket.
393[ 15.569742] systemd[1]: Listening on Journal Socket (/dev/log).
394[ 15.794660] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
395[ 16.607277] systemd-journald[692]: Received request to flush runtime journal from PID 1
396[ 16.613656] systemd-journald[692]: File /var/log/journal/fbe994ba5fb245d5aa2adf845ef9160c/system.journal corrupted or uncleanly shut down, renaming and replacing.
397[ 17.221443] mc: Linux media interface: v0.10
398[ 17.291119] videodev: Linux video capture interface: v2.00
399[ 17.521552] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
400[ 17.523779] vc_sm_cma: module verification failed: signature and/or required key missing - tainting kernel
401[ 17.591679] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
402[ 17.618606] Registered IR keymap rc-hauppauge
403[ 17.660121] IR RC5(x/sz) protocol handler initialized
404[ 17.690709] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
405[ 17.726878] rc rc0: Conexant Hybrid TV (cx231xx) MCE IR no TX (2040:b123) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/rc/rc0
406[ 17.727048] input: Conexant Hybrid TV (cx231xx) MCE IR no TX (2040:b123) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/rc/rc0/input14
407[ 17.727478] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, no transmitter
408[ 17.733245] cfg80211: Loading compiled-in X.509 certificates for regulatory database
409[ 17.742684] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
410[ 17.785262] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
411[ 17.785281] cfg80211: failed to load regulatory.db
412[ 17.918827] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
413[ 17.924310] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
414[ 17.937252] mceusb 1-1.5.1:1.0: long-range (0x1) receiver active
415[ 17.937473] usbcore: registered new interface driver brcmfmac
416[ 17.994694] mceusb 1-1.5.1:1.0: Registered Hauppauge Hauppauge Device with mce emulator interface version 1
417[ 17.994708] mceusb 1-1.5.1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
418[ 17.995218] usbcore: registered new interface driver mceusb
419[ 18.226841] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
420[ 18.239958] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
421[ 18.256663] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
422[ 18.309656] cx231xx 1-1.5.1:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:b123) with 7 interfaces
423[ 18.309856] cx231xx 1-1.5.1:1.1: Identified as Hauppauge WinTV-HVR-955Q (111401) (card=21)
424[ 18.320865] i2c i2c-4: Added multiplexed i2c bus 6
425[ 18.321248] i2c i2c-4: Added multiplexed i2c bus 7
426[ 18.561220] cx25840 3-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
427[ 20.683717] cx25840 3-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
428[ 20.787964] tveeprom: Hauppauge model 111401, rev E3I6, serial# 4036125389
429[ 20.787978] tveeprom: MAC address is 00:0d:fe:92:62:cd
430[ 20.787984] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
431[ 20.787991] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
432[ 20.787998] tveeprom: audio processor is CX23102 (idx 47)
433[ 20.788003] tveeprom: decoder processor is CX23102 (idx 46)
434[ 20.788008] tveeprom: has no radio, has IR receiver, has no IR transmitter
435[ 20.788027] cx231xx 1-1.5.1:1.1: v4l2 driver version 0.0.3
436[ 20.874004] cx231xx 1-1.5.1:1.1: Unknown tuner type configuring SIF
437[ 20.936980] cx231xx 1-1.5.1:1.1: Registered video device video0 [v4l2]
438[ 20.937275] cx231xx 1-1.5.1:1.1: Registered VBI device vbi0
439[ 20.937293] cx231xx 1-1.5.1:1.1: video EndPoint Addr 0x84, Alternate settings: 5
440[ 20.937318] cx231xx 1-1.5.1:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
441[ 20.937330] cx231xx 1-1.5.1:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
442[ 20.937340] cx231xx 1-1.5.1:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
443[ 20.938517] usbcore: registered new interface driver cx231xx
444[ 21.050886] cx231xx 1-1.5.1:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
445[ 21.050902] cx231xx 1-1.5.1:1.1: Cx231xx Audio Extension initialized
446[ 21.223585] i2c i2c-7: Added multiplexed i2c bus 8
447[ 21.223600] lgdt3306a 7-0059: LG Electronics LGDT3306A successfully identified
448[ 21.258013] cx231xx 1-1.5.1:1.1: cx231xx_send_usb_command: failed with status --32
449[ 21.269953] si2157: probe of 7-0060 failed with error -32
450[ 21.279050] cx231xx 1-1.5.1:1.1: Cx231xx dvb Extension initialized
451[ 27.985637] alua: device handler registered
452[ 27.992400] emc: device handler registered
453[ 27.999583] rdac: device handler registered
454[ 28.825458] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
455[ 29.786772] audit: type=1400 audit(1575390525.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1119 comm="apparmor_parser"
456[ 29.790026] audit: type=1400 audit(1575390525.083:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1122 comm="apparmor_parser"
457[ 29.790060] audit: type=1400 audit(1575390525.083:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1122 comm="apparmor_parser"
458[ 29.796576] audit: type=1400 audit(1575390525.091:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1120 comm="apparmor_parser"
459[ 29.796606] audit: type=1400 audit(1575390525.091:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1120 comm="apparmor_parser"
460[ 29.833103] audit: type=1400 audit(1575390525.127:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1125 comm="apparmor_parser"
461[ 29.837807] audit: type=1400 audit(1575390525.131:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1121 comm="apparmor_parser"
462[ 29.837839] audit: type=1400 audit(1575390525.131:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1121 comm="apparmor_parser"
463[ 29.837856] audit: type=1400 audit(1575390525.131:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1121 comm="apparmor_parser"
464[ 29.837873] audit: type=1400 audit(1575390525.131:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1121 comm="apparmor_parser"
465[ 30.429661] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
466[ 38.083094] FS-Cache: Loaded
467[ 38.424941] FS-Cache: Netfs 'cifs' registered for caching
468[ 38.518729] Key type cifs.spnego registered
469[ 38.518756] Key type cifs.idmap registered
470[ 38.522355] CIFS: Attempting to mount //nas/Videos
471[ 38.522506] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
472[ 45.751711] kauditd_printk_skb: 22 callbacks suppressed
473[ 45.751721] audit: type=1326 audit(1576364623.096:34): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1227 comm="tvheadend" exe="/snap/tvheadend/89/usr/bin/tvheadend" sig=0 arch=c00000b7 syscall=54 compat=0 ip=0xffffb9440eb0 code=0x50000
474[ 45.792586] audit: type=1326 audit(1576364623.136:35): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1227 comm="tvh:save" exe="/snap/tvheadend/89/usr/bin/tvheadend" sig=0 arch=c00000b7 syscall=140 compat=0 ip=0xffffb9445918 code=0x50000
475[ 45.793222] audit: type=1326 audit(1576364623.136:36): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1227 comm="tvh:tasklet" exe="/snap/tvheadend/89/usr/bin/tvheadend" sig=0 arch=c00000b7 syscall=140 compat=0 ip=0xffffb9445918 code=0x50000
476[ 45.939170] audit: type=1400 audit(1576364623.284:37): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/usr/sbin/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
477[ 45.947884] audit: type=1400 audit(1576364623.292:38): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/sbin/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
478[ 45.947915] audit: type=1400 audit(1576364623.292:39): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/bin/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
479[ 45.947995] audit: type=1400 audit(1576364623.292:40): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/usr/games/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
480[ 45.950950] audit: type=1400 audit(1576364623.296:41): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/usr/sbin/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
481[ 45.955049] audit: type=1400 audit(1576364623.300:42): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/sbin/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
482[ 45.955163] audit: type=1400 audit(1576364623.300:43): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/bin/" pid=1227 comm="tvheadend" requested_mask="r" denied_mask="r" fsuid=0 ouid=0