· 8 years ago · Jan 07, 2018, 12:36 AM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
4[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
5[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
6[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
7[ 0.000000] Memory policy: ECC disabled, Data cache writeback
8[ 0.000000] On node 0 totalpages: 65280
9[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
10[ 0.000000] Normal zone: 512 pages used for memmap
11[ 0.000000] Normal zone: 0 pages reserved
12[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
13[ 0.000000] AM335X ES1.0 (neon )
14[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
15[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
16[ 0.000000] pcpu-alloc: [0] 0
17[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
18[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
19[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
20[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
21[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
22[ 0.000000] __ex_table already sorted, skipping sort
23[ 0.000000] allocated 524288 bytes of page_cgroup
24[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
25[ 0.000000] Memory: 255MB = 255MB total
26[ 0.000000] Memory: 238628k/238628k available, 23516k reserved, 0K highmem
27[ 0.000000] Virtual kernel memory layout:
28[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
29[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
30[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
31[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
32[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
33[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
34[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
35[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
36[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
37[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
38[ 0.000000] Hierarchical RCU implementation.
39[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
40[ 0.000000] NR_IRQS:16 nr_irqs:16 16
41[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
42[ 0.000000] Total of 128 interrupts on 1 active controller
43[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
44[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
45[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
46[ 0.000000] Console: colour dummy device 80x30
47[ 0.000360] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
48[ 0.015441] pid_max: default: 32768 minimum: 301
49[ 0.015671] Security Framework initialized
50[ 0.015766] Mount-cache hash table entries: 512
51[ 0.024595] Initializing cgroup subsys cpuacct
52[ 0.024628] Initializing cgroup subsys memory
53[ 0.024689] Initializing cgroup subsys blkio
54[ 0.024822] CPU: Testing write buffer coherency: ok
55[ 0.025399] CPU0: thread -1, cpu 0, socket -1, mpidr 0
56[ 0.025474] Setting up static identity map for 0x8038c820 - 0x8038c86c
57[ 0.026807] Brought up 1 CPUs
58[ 0.026831] SMP: Total of 1 processors activated (545.07 BogoMIPS).
59[ 0.028134] devtmpfs: initialized
60[ 0.092505] pinctrl core: initialized pinctrl subsystem
61[ 0.092720] rstctl core: initialized rstctl subsystem
62[ 0.093211] regulator-dummy: no parameters
63[ 0.093783] NET: Registered protocol family 16
64[ 0.094484] DMA: preallocated 256 KiB pool for atomic coherent allocations
65[ 0.104163] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
66[ 0.104343] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
67[ 0.105436] platform 49000000.edma: alias fck already exists
68[ 0.105470] platform 49000000.edma: alias fck already exists
69[ 0.105497] platform 49000000.edma: alias fck already exists
70[ 0.106652] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
71[ 0.106833] OMAP GPIO hardware version 0.1
72[ 0.108236] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
73[ 0.109548] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
74[ 0.110863] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
75[ 0.111496] of_get_named_gpio_flags exited with status 52
76[ 0.111527] gpio-rctrl rstctl.3: loaded OK
77[ 0.116640] omap-gpmc 50000000.gpmc: GPMC revision 6.0
78[ 0.119851] hw-breakpoint: debug architecture 0x4 unsupported.
79[ 0.122036] cpsw.0: No hwaddr in dt. Using 90:70:65:69:de:e7 from efuse
80[ 0.122067] cpsw.1: No hwaddr in dt. Using 90:70:65:69:de:e9 from efuse
81[ 0.137618] bio: create slab <bio-0> at 0
82[ 0.149742] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
83[ 0.149980] of_get_named_gpio_flags: can't parse gpios property
84[ 0.150270] vmmcsd_fixed: 3300 mV
85[ 0.153387] SCSI subsystem initialized
86[ 0.153838] usbcore: registered new interface driver usbfs
87[ 0.153953] usbcore: registered new interface driver hub
88[ 0.154287] usbcore: registered new device driver usb
89[ 0.156396] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
90[ 0.156429] omap_i2c 4819c000.i2c: unable to select pin group
91[ 0.156623] media: Linux media interface: v0.10
92[ 0.156719] Linux video capture interface: v2.00
93[ 0.156835] pps_core: LinuxPPS API ver. 1 registered
94[ 0.156851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
95[ 0.157569] Advanced Linux Sound Architecture Driver Initialized.
96[ 0.158765] Switching to clocksource gp_timer
97[ 0.176796] NET: Registered protocol family 2
98[ 0.177795] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
99[ 0.177884] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
100[ 0.177974] TCP: Hash tables configured (established 2048 bind 2048)
101[ 0.178066] TCP: reno registered
102[ 0.178092] UDP hash table entries: 256 (order: 1, 12288 bytes)
103[ 0.178138] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
104[ 0.178628] NET: Registered protocol family 1
105[ 0.179217] RPC: Registered named UNIX socket transport module.
106[ 0.179238] RPC: Registered udp transport module.
107[ 0.179252] RPC: Registered tcp transport module.
108[ 0.179266] RPC: Registered tcp NFSv4.1 backchannel transport module.
109[ 0.179657] Trying to unpack rootfs image as initramfs...
110[ 1.957529] Freeing initrd memory: 12288K
111[ 1.958262] CPU PMU: probing PMU on CPU 0
112[ 1.958295] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
113[ 1.958822] omap2_mbox_probe: platform not supported
114[ 1.962727] VFS: Disk quotas dquot_6.5.2
115[ 1.962965] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
116[ 1.964352] NFS: Registering the id_resolver key type
117[ 1.964442] Key type id_resolver registered
118[ 1.964459] Key type id_legacy registered
119[ 1.964526] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
120[ 1.964964] msgmni has been set to 490
121[ 1.967847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
122[ 1.967874] io scheduler noop registered
123[ 1.967889] io scheduler deadline registered
124[ 1.967946] io scheduler cfq registered (default)
125[ 1.972020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
126[ 1.974441] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
127[ 1.974722] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
128[ 2.635534] console [ttyO0] enabled
129[ 2.640115] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
130[ 2.648777] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
131[ 2.657464] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
132[ 2.666078] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
133[ 2.675111] [drm] Initialized drm 1.1.0 20060810
134[ 2.693740] brd: module loaded
135[ 2.704049] loop: module loaded
136[ 2.708280] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
137[ 2.718215] nand_get_flash_type: 2c,da against 2c,da
138[ 2.723740] ONFI param page 0 valid
139[ 2.727414] ONFI flash detected
140[ 2.730734] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
141[ 2.742647] omap2-nand: detected x8 NAND flash
142[ 2.747313] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
143[ 2.752895] omap2-nand: using custom ecc layout
144[ 2.757738] 10 ofpart partitions found on MTD device omap2-nand.0
145[ 2.764132] Creating 10 MTD partitions on "omap2-nand.0":
146[ 2.769809] 0x000000000000-0x000000020000 : "spl"
147[ 2.776647] 0x000000020000-0x000000040000 : "spl_backup1"
148[ 2.784111] 0x000000040000-0x000000060000 : "spl_backup2"
149[ 2.791467] 0x000000060000-0x000000080000 : "spl_backup3"
150[ 2.798871] 0x000000080000-0x000000240000 : "u-boot"
151[ 2.807096] 0x000000240000-0x000000260000 : "bootenv"
152[ 2.814054] 0x000000260000-0x000000280000 : "fdt"
153[ 2.820648] 0x000000280000-0x000000780000 : "kernel"
154[ 2.831673] 0x000000800000-0x000001c00000 : "root"
155[ 2.855174] 0x000001c00000-0x000003000000 : "config"
156[ 2.878962] OneNAND driver initializing
157[ 2.884709] usbcore: registered new interface driver asix
158[ 2.890532] usbcore: registered new interface driver cdc_ether
159[ 2.896779] usbcore: registered new interface driver smsc95xx
160[ 2.902897] usbcore: registered new interface driver net1080
161[ 2.908937] usbcore: registered new interface driver cdc_subset
162[ 2.915230] usbcore: registered new interface driver zaurus
163[ 2.921235] usbcore: registered new interface driver cdc_ncm
164[ 2.927953] usbcore: registered new interface driver cdc_acm
165[ 2.933913] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
166[ 2.942292] Initializing USB Mass Storage driver...
167[ 2.947533] usbcore: registered new interface driver usb-storage
168[ 2.953834] USB Mass Storage support registered.
169[ 2.958879] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
170[ 2.965633] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
171[ 2.970869] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
172[ 2.979640] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
173[ 2.979662] musb-hdrc: MHDRC RTL version 2.0
174[ 2.979677] musb-hdrc: setup fifo_mode 4
175[ 2.979705] musb-hdrc: 28/31 max ep, 16384/16384 memory
176[ 2.979850] musb-hdrc musb-hdrc.0.auto: *** mode=3
177[ 2.984896] musb-hdrc musb-hdrc.0.auto: *** power=250
178[ 2.990963] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
179[ 2.996204] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
180[ 3.005205] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
181[ 3.005228] musb-hdrc: MHDRC RTL version 2.0
182[ 3.005242] musb-hdrc: setup fifo_mode 4
183[ 3.005265] musb-hdrc: 28/31 max ep, 16384/16384 memory
184[ 3.005413] musb-hdrc musb-hdrc.1.auto: *** mode=1
185[ 3.010476] musb-hdrc musb-hdrc.1.auto: *** power=250
186[ 3.015785] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
187[ 3.022241] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
188[ 3.030478] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
189[ 3.030583] usb usb1: default language 0x0409
190[ 3.030642] usb usb1: udev 1, busnum 1, minor = 0
191[ 3.030665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
192[ 3.037793] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
193[ 3.045366] usb usb1: Product: MUSB HDRC host driver
194[ 3.050585] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
195[ 3.056253] usb usb1: SerialNumber: musb-hdrc.1.auto
196[ 3.062220] usb usb1: usb_probe_device
197[ 3.062247] usb usb1: configuration #1 chosen from 1 choice
198[ 3.062311] usb usb1: adding 1-0:1.0 (config #1, interface 0)
199[ 3.062510] hub 1-0:1.0: usb_probe_interface
200[ 3.062532] hub 1-0:1.0: usb_probe_interface - got id
201[ 3.062560] hub 1-0:1.0: USB hub found
202[ 3.066562] hub 1-0:1.0: 1 port detected
203[ 3.070702] hub 1-0:1.0: standalone hub
204[ 3.070721] hub 1-0:1.0: individual port power switching
205[ 3.070739] hub 1-0:1.0: no over-current protection
206[ 3.070756] hub 1-0:1.0: Single TT
207[ 3.070777] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
208[ 3.070797] hub 1-0:1.0: power on to power good time: 10ms
209[ 3.070854] hub 1-0:1.0: local power source is good
210[ 3.071003] hub 1-0:1.0: enabling power on all ports
211[ 3.072045] mousedev: PS/2 mouse device common for all mice
212[ 3.080007] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
213[ 3.087507] 44e3e000.rtc: already running
214[ 3.092007] i2c /dev entries driver
215[ 3.097067] pps_ldisc: PPS line discipline registered
216[ 3.102546] Driver for 1-wire Dallas network protocol.
217[ 3.109811] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
218[ 3.117376] cpuidle: using governor ladder
219[ 3.121704] cpuidle: using governor menu
220[ 3.126280] of_get_named_gpio_flags exited with status 6
221[ 3.126301] of_get_named_gpio_flags: can't parse gpios property
222[ 3.126316] of_get_named_gpio_flags: can't parse gpios property
223[ 3.126352] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
224[ 3.133575] omap_hsmmc mmc.4: Failed to get rstctl; not using any
225[ 3.140388] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
226[ 3.147606] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
227[ 3.154967] mmc.4 supply vmmc_aux not found, using dummy regulator
228[ 3.161911] omap_hsmmc mmc.4: pins are not configured from the driver
229[ 3.172660] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
230[ 3.196569] of_get_named_gpio_flags exited with status -517
231[ 3.196635] platform gpio-leds.7: Driver leds-gpio requests probe deferral
232[ 3.204407] ledtrig-cpu: registered to indicate activity on CPUs
233[ 3.211186] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
234[ 3.218380] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
235[ 3.226544] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
236[ 3.232835] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
237[ 3.240012] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
238[ 3.252264] usbcore: registered new interface driver usbhid
239[ 3.258183] usbhid: USB HID core driver
240[ 3.265089] TCP: cubic registered
241[ 3.268613] Initializing XFRM netlink socket
242[ 3.273193] NET: Registered protocol family 17
243[ 3.278090] NET: Registered protocol family 15
244[ 3.282926] Key type dns_resolver registered
245[ 3.287562] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
246[ 3.295642] ThumbEE CPU extension supported.
247[ 3.300149] Registering SWP/SWPB emulation handler
248[ 3.306172] registered taskstats version 1
249[ 3.312815] of_get_named_gpio_flags exited with status -517
250[ 3.312889] platform gpio-leds.7: Driver leds-gpio requests probe deferral
251[ 3.369862] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
252[ 3.376317] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
253[ 3.390821] libphy: 4a101000.mdio: probed
254[ 3.395134] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
255[ 3.405376] Detected MACID = 90:70:65:69:de:e7
256[ 3.410053] cpsw 4a100000.ethernet: NAPI disabled
257[ 3.415443] of_get_named_gpio_flags exited with status -517
258[ 3.415508] platform gpio-leds.7: Driver leds-gpio requests probe deferral
259[ 3.424255] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
260[ 3.433541] cpu0 supply cpu0 not found, using dummy regulator
261[ 3.440048] cpufreq_cpu0: failed to scale voltage up: -22
262[ 3.445870] cpufreq_cpu0: failed to scale voltage up: -22
263[ 3.458623] ALSA device list:
264[ 3.461850] No soundcards found.
265[ 3.466398] Freeing init memory: 264K
266[ 3.470454] Failed to execute /init
267[ 4.483508] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
268[ 5.843509] net eth0: initializing cpsw version 1.12 (0)
269[ 5.852429] net eth0: phy found : id is : 0x7c0f1
270[ 5.857824] libphy: PHY 4a101000.mdio:01 not found
271[ 5.863019] net eth0: phy 4a101000.mdio:01 not found on slave 1
272[ 10.001186] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
273Jan 7 00:33:03 (none) local0.notice cgminer[27183]: detected at /sys/class/gpio/gpio51/value chain 0
274Jan 7 00:33:03 (none) local0.notice cgminer[27183]: detected at /sys/class/gpio/gpio48/value chain 1
275Jan 7 00:33:03 (none) local0.notice cgminer[27183]: detected at /sys/class/gpio/gpio47/value chain 2
276Jan 7 00:33:03 (none) local0.notice cgminer[27183]: detect total chain num 3
277Jan 7 00:33:03 (none) local0.notice cgminer[27183]: i2c init ok
278Jan 7 00:33:03 (none) local0.notice cgminer[27183]: every_chain_reset_PIC16F1704_pic_new
279Jan 7 00:33:05 (none) local0.notice cgminer[27183]: reset_PIC16F1704_pic_new ok
280Jan 7 00:33:07 (none) local0.notice cgminer[27183]: reset_PIC16F1704_pic_new ok
281Jan 7 00:33:08 (none) local0.notice cgminer[27183]: reset_PIC16F1704_pic_new ok
282Jan 7 00:33:08 (none) local0.notice cgminer[27183]: every_chain_jump_from_loader_to_app_PIC16F1704_new
283Jan 7 00:33:09 (none) local0.notice cgminer[27183]: jump_from_loader_to_app_PIC16F1704_new ok
284Jan 7 00:33:10 (none) local0.notice cgminer[27183]: jump_from_loader_to_app_PIC16F1704_new ok
285Jan 7 00:33:10 (none) local0.notice cgminer[27183]: jump_from_loader_to_app_PIC16F1704_new ok
286Jan 7 00:33:11 (none) local0.notice cgminer[27183]: every_chain_enable_PIC16F1704_dc_dc_new
287Jan 7 00:33:11 (none) local0.notice cgminer[27183]: pic_heart_beat_func_new
288Jan 7 00:33:11 (none) local0.notice cgminer[27183]: enable_PIC16F1704_dc_dc_new ok
289Jan 7 00:33:11 (none) local0.notice cgminer[27183]: enable_PIC16F1704_dc_dc_new ok
290Jan 7 00:33:11 (none) local0.notice cgminer[27183]: enable_PIC16F1704_dc_dc_new ok
291Jan 7 00:33:11 (none) local0.notice cgminer[27183]: reset_all_hash_board
292Jan 7 00:33:11 (none) local0.notice cgminer[27183]: tty_init
293Jan 7 00:33:11 (none) local0.notice cgminer[27183]: tty_init_chain
294Jan 7 00:33:11 (none) local0.notice cgminer[27183]: tty_init_chain chainid = 0
295Jan 7 00:33:11 (none) local0.err cgminer[27183]: create rx read thread for chain 0 ok
296Jan 7 00:33:11 (none) local0.notice cgminer[27183]: Start A New Asic Response.Chain Id:[0]
297Jan 7 00:33:12 (none) local0.err cgminer[27183]: create tx read thread for chain 0 ok
298Jan 7 00:33:12 (none) local0.notice cgminer[27183]: open device over
299Jan 7 00:33:12 (none) local0.notice cgminer[27183]: tty_init_chain
300Jan 7 00:33:12 (none) local0.notice cgminer[27183]: tty_init_chain chainid = 1
301Jan 7 00:33:12 (none) local0.err cgminer[27183]: create rx read thread for chain 1 ok
302Jan 7 00:33:12 (none) local0.notice cgminer[27183]: Start A New Asic Response.Chain Id:[1]
303Jan 7 00:33:12 (none) local0.err cgminer[27183]: create tx read thread for chain 1 ok
304Jan 7 00:33:12 (none) local0.notice cgminer[27183]: open device over
305Jan 7 00:33:12 (none) local0.notice cgminer[27183]: tty_init_chain
306Jan 7 00:33:12 (none) local0.notice cgminer[27183]: tty_init_chain chainid = 2
307Jan 7 00:33:12 (none) local0.err cgminer[27183]: create rx read thread for chain 2 ok
308Jan 7 00:33:12 (none) local0.notice cgminer[27183]: Start A New Asic Response.Chain Id:[2]
309Jan 7 00:33:12 (none) local0.err cgminer[27183]: create tx read thread for chain 2 ok
310Jan 7 00:33:12 (none) local0.notice cgminer[27183]: open device over
311Jan 7 00:33:12 (none) local0.notice cgminer[27183]: tty_init_chain
312Jan 7 00:33:12 (none) local0.notice cgminer[27183]: open device over
313Jan 7 00:33:12 (none) local0.notice cgminer[27183]: check_every_chain_asic_number
314Jan 7 00:33:12 (none) local0.warn cgminer[27183]: check_asic_reg: Chain0 has 60 ASICs
315Jan 7 00:33:12 (none) local0.warn cgminer[27183]: check_asic_reg: Chain1 has 60 ASICs
316Jan 7 00:33:13 (none) local0.warn cgminer[27183]: check_asic_reg: Chain2 has 60 ASICs
317Jan 7 00:33:13 (none) local0.notice cgminer[27183]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
318Jan 7 00:33:13 (none) local0.notice cgminer[27183]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
319Jan 7 00:33:13 (none) local0.notice cgminer[27183]: set_ticket_mask ticket_mask = 0x0000001b
320Jan 7 00:33:13 (none) local0.notice cgminer[27183]: set_frequency: frequency = 1
321Jan 7 00:33:13 (none) local0.notice cgminer[27183]: set_frequency_chain: frequency = 1
322Jan 7 00:33:13 (none) local0.notice cgminer[27183]: set_frequency_chain: frequency = 1
323Jan 7 00:33:13 (none) local0.notice cgminer[27183]: set_frequency_chain: frequency = 1
324Jan 7 00:33:13 (none) local0.notice cgminer[27183]: set_frequency_chain: frequency = 0
325Jan 7 00:33:13 (none) local0.notice cgminer[27183]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
326Jan 7 00:33:13 (none) local0.notice cgminer[27183]: Now Set [0] Chain Address
327Jan 7 00:33:14 (none) local0.notice cgminer[27183]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
328Jan 7 00:33:14 (none) local0.notice cgminer[27183]: Now Set [1] Chain Address
329Jan 7 00:33:14 (none) local0.notice cgminer[27183]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
330Jan 7 00:33:14 (none) local0.notice cgminer[27183]: Now Set [2] Chain Address
331Jan 7 00:33:15 (none) local0.notice cgminer[27183]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
332Jan 7 00:33:15 (none) local0.notice cgminer[27183]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
333Jan 7 00:33:15 (none) local0.notice cgminer[27183]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
334Jan 7 00:33:15 (none) local0.notice cgminer[27183]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
335Jan 7 00:33:15 (none) local0.notice cgminer[27183]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
336Jan 7 00:33:15 (none) local0.notice cgminer[27183]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
337Jan 7 00:33:15 (none) local0.notice cgminer[27183]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
338Jan 7 00:33:15 (none) local0.notice cgminer[27183]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
339Jan 7 00:33:15 (none) local0.notice cgminer[27183]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
340Jan 7 00:33:15 (none) local0.notice cgminer[27183]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
341Jan 7 00:33:15 (none) local0.notice cgminer[27183]: 0 calibration_sensor_offset_chain
342Jan 7 00:33:15 (none) local0.notice cgminer[27183]: chain:0 local:41 remote:44
343Jan 7 00:33:15 (none) local0.warn cgminer[27183]: Chain 0 set_temperature_offset_value_chain_sensor
344Jan 7 00:33:15 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
345Jan 7 00:33:16 (none) local0.notice cgminer[27183]: chain:0 local:41 remote:41
346Jan 7 00:33:16 (none) local0.warn cgminer[27183]: Chain 0 set_temperature_offset_value_chain_sensor
347Jan 7 00:33:16 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
348Jan 7 00:33:16 (none) local0.notice cgminer[27183]: 1 calibration_sensor_offset_chain
349Jan 7 00:33:16 (none) local0.notice cgminer[27183]: chain:1 local:32 remote:34
350Jan 7 00:33:16 (none) local0.warn cgminer[27183]: Chain 1 set_temperature_offset_value_chain_sensor
351Jan 7 00:33:17 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
352Jan 7 00:33:17 (none) local0.notice cgminer[27183]: 2 calibration_sensor_offset_chain
353Jan 7 00:33:17 (none) local0.notice cgminer[27183]: chain:2 local:41 remote:44
354Jan 7 00:33:17 (none) local0.warn cgminer[27183]: Chain 2 set_temperature_offset_value_chain_sensor
355Jan 7 00:33:17 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -3,
356Jan 7 00:33:18 (none) local0.notice cgminer[27183]: chain:2 local:41 remote:41
357Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 2 set_temperature_offset_value_chain_sensor
358Jan 7 00:33:18 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -3,
359Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 0 set_temperature_offset_value_chain
360Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 0 set_temperature_offset_value_chain_sensor
361Jan 7 00:33:18 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
362Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 1 set_temperature_offset_value_chain
363Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 1 set_temperature_offset_value_chain_sensor
364Jan 7 00:33:18 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
365Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 2 set_temperature_offset_value_chain
366Jan 7 00:33:18 (none) local0.warn cgminer[27183]: Chain 2 set_temperature_offset_value_chain_sensor
367Jan 7 00:33:19 (none) local0.notice cgminer[27183]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -3,
368Jan 7 00:33:19 (none) local0.notice cgminer[27183]: frequency = '1'
369Jan 7 00:33:19 (none) local0.notice cgminer[27183]: dev.timeout = 301989852 us
370Jan 7 00:33:19 (none) local0.notice cgminer[27183]: open_core_chain
371Jan 7 00:33:19 (none) local0.notice cgminer[27183]: open_core_chain
372Jan 7 00:33:19 (none) local0.notice cgminer[27183]: open_core_chain
373Jan 7 00:33:19 (none) local0.notice cgminer[27183]: open_core_chain
374Jan 7 00:33:21 (none) local0.err cgminer[27183]: low hashrate detection trigger: 31.464000 Gh/s
375Jan 7 00:33:21 (none) local0.notice cgminer[27183]: set voltage = 1143.942031 real:255 mv
376Jan 7 00:33:21 (none) local0.notice cgminer[27183]: set_PIC16F1704_voltage_new ok, voltage = 0xff
377Jan 7 00:33:21 (none) local0.notice cgminer[27183]: set_PIC16F1704_voltage_new ok, voltage = 0xff
378Jan 7 00:33:22 (none) local0.notice cgminer[27183]: set_PIC16F1704_voltage_new ok, voltage = 0xff
379Jan 7 00:33:22 (none) local0.err cgminer[27183]: cgminer time error total_secs = 1515285202.611466 last_total_secs = 1.000000
380Jan 7 00:33:23 (none) local0.err cgminer[27183]: WTF No pool 3 found!
381Jan 7 00:33:23 (none) local0.err cgminer[27183]: WTF No pool 3 found!
382Jan 7 00:33:24 (none) local0.warn cgminer[27183]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
383Jan 7 00:33:24 (none) local0.warn cgminer[27183]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
384Jan 7 00:33:28 (none) local0.warn cgminer[27183]: API running in IP access mode on port 4028 (15)
385Jan 7 00:33:33 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 0 testing new frequency: 353.
386Jan 7 00:33:33 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 1 testing new frequency: 353.
387Jan 7 00:33:34 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 2 testing new frequency: 353.
388Jan 7 00:34:04 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 0 testing new frequency: 356.
389Jan 7 00:34:04 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 1 testing new frequency: 356.
390Jan 7 00:34:04 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 2 testing new frequency: 356.
391Jan 7 00:34:34 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 0 testing new frequency: 359.
392Jan 7 00:34:35 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 1 testing new frequency: 359.
393Jan 7 00:34:35 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 2 testing new frequency: 359.
394Jan 7 00:35:05 (none) local0.notice cgminer[27183]: AUTOTUNE chain 1, Frequency 359 too high. Count = 1.
395Jan 7 00:35:05 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 0 testing new frequency: 362.
396Jan 7 00:35:05 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 1 testing new frequency: 362.
397Jan 7 00:35:06 (none) local0.notice cgminer[27183]: AUTOTUNE: chain 2 testing new frequency: 362.