· 6 years ago · Jan 04, 2020, 05:34 PM
1CoreELEC (official): nightly_20200103 (Amlogic-ng.arm)
2CoreELEC:~ # dmesg
3[ 0.000000@0] Booting Linux on physical CPU 0x0
4[ 0.000000@0] Linux version 4.9.113 (relkai@hammbwcor01) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Sat Jan 4 03:20:29 CET 2020
5[ 0.000000@0] Boot CPU: AArch64 Processor [411fd050]
6[ 0.000000@0] Machine model: Amlogic S905X3
7[ 0.000000@0] efi: Getting EFI parameters from FDT:
8[ 0.000000@0] efi: UEFI not found.
9[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
10[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
11[ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
12[ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB
13[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB
14[ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
15[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000ed800000, size 128 MiB
16[ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
17[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000eb000000, size 40 MiB
18[ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
19[ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000eb000000, size 0 MiB
20[ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
21[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000d7c00000, size 308 MiB
22[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
23[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
24[ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000d5c00000, size 32 MiB
25[ 0.000000@0] OF: reserved mem: initialized node linux,vm0_cma, compatible id shared-dma-pool
26[ 0.000000@0] cma: Reserved 8 MiB at 0x00000000d5400000
27[ 0.000000@0] On node 0 totalpages: 1005312
28[ 0.000000@0] DMA zone: 15708 pages used for memmap
29[ 0.000000@0] DMA zone: 0 pages reserved
30[ 0.000000@0] DMA zone: 1005312 pages, LIFO batch:31
31[ 0.000000@0] psci: probing for conduit method from DT.
32[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
33[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
34[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
35[ 0.000000@0] psci: SMC Calling Convention v1.1
36[ 0.000000@0] percpu: Embedded 22 pages/cpu @ffffffc0d5330000 s51992 r8192 d29928 u90112
37[ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096
38[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
39[ 0.000000@0] Detected VIPT I-cache on CPU0
40[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989604
41[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=0 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 mac=90:0e:b3:10:db:5b androidboot.mac=90:0e:b3:10:db:5b androidboot.rpmb_state=1 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend enable_wol=1 hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto
42[ 0.000000@0] fb: osd0
43[ 0.000000@0] fb: loaded
44[ 0.000000@0] fb: 0x3d800000
45[ 0.000000@0] vout: 1080p60hz
46[ 0.000000@0] vout: enable: 1
47[ 0.000000@0] lcd: panel_type: lcd_1
48[ 0.000000@0] vout: get hdmimode: 1080p60hz
49[ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
50[ 0.000000@0] vout: get cvbsmode: 576cvbs
51[ 0.000000@0] vpp_axis_reverse: bootargs is 0
52[ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
53[ 0.000000@0] phlock_phase_config: bootargs is 0.
54[ 0.000000@0] jtag: jtag select disable
55[ 0.000000@0] init_wol_state, enable_wol=1
56[ 0.000000@0] vout: get hdmimode: 1080p60hz
57[ 0.000000@0] fb: osd0
58[ 0.000000@0] fb: loaded
59[ 0.000000@0] fb: 0x3d800000
60[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
61[ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
62[ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
63[ 0.000000@0] Memory: 3377916K/4021248K available (10620K kernel code, 1574K rwdata, 8488K rodata, 4224K init, 1382K bss, 102660K reserved, 540672K cma-reserved)
64[ 0.000000@0] Virtual kernel memory layout:
65[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
66[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
67[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009ae0000 ( 10624 KB)
68[ 0.000000@0] .rodata : 0xffffff8009ae0000 - 0xffffff800a330000 ( 8512 KB)
69[ 0.000000@0] .init : 0xffffff800a330000 - 0xffffff800a750000 ( 4224 KB)
70[ 0.000000@0] .data : 0xffffff800a750000 - 0xffffff800a8d9a00 ( 1575 KB)
71[ 0.000000@0] .bss : 0xffffff800a8d9a00 - 0xffffff800aa3343c ( 1383 KB)
72[ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
73[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
74[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
75[ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf03d60000 ( 61 MB actual)
76[ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc0f5800000 ( 3927 MB)
77[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
78[ 0.000000@0] Preemptible hierarchical RCU implementation.
79[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
80[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
81[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
82[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
83[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
84[ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
85[ 0.000000@0] Meson chip version = RevC (2B:C - 10:0)
86[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
87[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
88[ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
89[ 0.000000@0] meson_g12a_media_init: register meson media clk
90[ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
91[ 0.000000@0] meson_g12a_misc_init: done.
92[ 0.000000@0] g12a_clkc_init initialization complete
93[ 0.000000@0] sm1 clk probe ok
94[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
95[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
96[ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
97[ 0.000033@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
98[ 0.000596@0] Console: colour dummy device 80x25
99[ 0.000623@0] console [tty0] enabled
100[ 0.000637@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
101[ 0.000648@0] pid_max: default: 32768 minimum: 301
102[ 0.000742@0] Security Framework initialized
103[ 0.000749@0] SELinux: Initializing.
104[ 0.000790@0] SELinux: Starting in permissive mode
105[ 0.000824@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
106[ 0.000829@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
107[ 0.001513@0] ftrace: allocating 35740 entries in 140 pages
108[ 0.074783@0] sched-energy: CPU device node has no sched-energy-costs
109[ 0.074791@0] CPU0: update cpu_capacity 1024
110[ 0.074802@0] ASID allocator initialised with 65536 entries
111[ 0.117678@0] secmon: can't fine clear_range
112[ 0.117808@0] EFI services will not be available.
113[ 0.163204@1] Detected VIPT I-cache on CPU1
114[ 0.163255@1] CPU1: update cpu_capacity 1024
115[ 0.163257@1] CPU1: Booted secondary processor [411fd050]
116[ 0.195261@2] Detected VIPT I-cache on CPU2
117[ 0.195295@2] CPU2: update cpu_capacity 1024
118[ 0.195297@2] CPU2: Booted secondary processor [411fd050]
119[ 0.227355@3] Detected VIPT I-cache on CPU3
120[ 0.227387@3] CPU3: update cpu_capacity 1024
121[ 0.227390@3] CPU3: Booted secondary processor [411fd050]
122[ 0.227478@0] Brought up 4 CPUs
123[ 0.227483@0] SMP: Total of 4 processors activated.
124[ 0.227487@0] CPU features: detected feature: Privileged Access Never
125[ 0.227491@0] CPU features: detected feature: User Access Override
126[ 0.227493@0] CPU features: detected feature: Virtualization Host Extensions
127[ 0.227495@0] CPU features: detected feature: 32-bit EL0 Support
128[ 0.227648@0] CPU: All CPU(s) started at EL2
129[ 0.227665@0] alternatives: patching kernel code
130[ 0.229600@0] devtmpfs: initialized
131[ 0.248641@0] DMI not present or invalid.
132[ 0.248969@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
133[ 0.248981@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
134[ 0.249171@0] pinctrl core: initialized pinctrl subsystem
135[ 0.250072@0] NET: Registered protocol family 16
136[ 0.251911@2] schedtune: init normalization constants...
137[ 0.251914@2] schedtune: no energy model data
138[ 0.251916@2] schedtune: disabled!
139[ 0.267399@2] cpuidle: using governor menu
140[ 0.267488@2] register canvas platform driver
141[ 0.267518@2] register rdma platform driver
142[ 0.267552@2] aml_vdac_init: module init
143[ 0.269333@2] vdso: 2 pages (1 code @ ffffff8009ae7000, 1 data @ ffffff800a755000)
144[ 0.269344@2] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
145[ 0.269784@2] DMA: preallocated 256 KiB pool for atomic allocations
146[ 0.269963@2] clkmsr: clkmsr: driver init
147[ 0.269966@2] codec_mm_module_init
148[ 0.270013@2] media_configs_system_init
149[ 0.270450@2] pstore: using zlib compression
150[ 0.270487@2] console [pstore-1] enabled
151[ 0.270491@2] pstore: Registered ramoops as persistent store backend
152[ 0.270496@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0
153[ 0.272109@2] aml_iomap: amlogic iomap probe done
154[ 0.272525@2] vpu: driver version: v20190314(10-sm1)
155[ 0.272531@2] vpu: load vpu_clk: 666666667Hz(7)
156[ 0.272754@2] vpu: clktree_init
157[ 0.272808@2] vpu: vpu_probe OK
158[ 0.276231@2] clkmsr: msr_clk_reg0=ffffff80081bc004,msr_clk_reg2=ffffff80081be00c
159[ 0.276240@2] clkmsr: msr_ring_reg0=ffffff80081c05fc
160[ 0.280344@2] aml_vdac_probe:probe start.cpu_id:8,name:meson-sm1-vdac
161[ 0.280513@2] aml_vdac_probe: ok
162[ 0.280643@2] canvas_probe reg=00000000ff638000,size=2000
163[ 0.280658@2] canvas maped reg_base =ffffff80081c2000
164[ 0.286462@2] rdma_probe,cpu_type:1, ver:0, len:8
165[ 0.286649@2] rdma_register, rdma_table_addr ffffff80081e5000 rdma_table_addr_phy d5440000 reg_buf ffffffc0cfc68000
166[ 0.286653@2] rdma_register success, handle 1 table_size 32768
167[ 0.286657@2] set_rdma_handle video rdma handle = 1.
168[ 0.287682@2] aml_snd_reg_map[0], reg:ff661000, size:400
169[ 0.287696@2] aml_snd_reg_map[1], reg:ff660000, size:1000
170[ 0.287708@2] aml_snd_reg_map[2], reg:ff661400, size:400
171[ 0.287720@2] aml_snd_reg_map[3], reg:ff662000, size:1000
172[ 0.287729@2] aml_snd_reg_map[4], reg:ffd01000, size:1000
173[ 0.287739@2] aml_snd_reg_map[5], reg:ff661800, size:400
174[ 0.287750@2] aml_snd_reg_map[6], reg:ff663800, size:30
175[ 0.287759@2] aml_snd_reg_map[7], reg:ff663c00, size:20
176[ 0.287768@2] aml_snd_reg_map[8], reg:ff663e00, size:10
177[ 0.287771@2] amlogic auge_snd_iomap probe done
178[ 0.289165@2] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout
179[ 0.289179@2] cvbs_out: clk path:0
180[ 0.289181@2] cvbs_out: error: failed to get vdac_config
181[ 0.289370@2] vout: vout1: register server: cvbs_vout_server
182[ 0.289372@2] cvbs_out: register cvbs module server ok
183[ 0.289376@2] vout: vout2: register server: cvbs_vout2_server
184[ 0.289379@2] cvbs_out: register cvbs module vout2 server ok
185[ 0.289384@2] cvbs_out: chrdev devno 264241152 for disp
186[ 0.289586@2] cvbs_out: create cdev cvbs
187[ 0.289589@2] cvbs_out: cvbsout_probe OK
188[ 0.289966@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
189[ 0.290049@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
190[ 0.290053@2] codec_mm_probe ok
191[ 0.449374@2] SCSI subsystem initialized
192[ 0.449639@2] usbcore: registered new interface driver usbfs
193[ 0.449689@2] usbcore: registered new interface driver hub
194[ 0.449782@2] usbcore: registered new device driver usb
195[ 0.449928@2] pps_core: LinuxPPS API ver. 1 registered
196[ 0.449931@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
197[ 0.449957@2] PTP clock support registered
198[ 0.450107@2] dmi: Firmware registration failed.
199[ 0.450474@2] secmon: reserve_mem_size:0x300000
200[ 0.450563@2] secmon secmon: assigned reserved memory node linux,secmon
201[ 0.450794@2] secmon: get page:ffffffbf00140000, 5000
202[ 0.450801@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
203[ 0.450803@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
204[ 0.451709@2] hdmitx: system: amhdmitx_probe start
205[ 0.451714@2] hdmitx: system: Ver: 20190624
206[ 0.451745@2] hdmitx: system: hdmitx_device.chip_type : 12
207[ 0.451784@2] hdmitx: system: not find match pwr-ctl
208[ 0.451838@2] hdmitx: system: not find drm_amhdmitx
209[ 0.451859@2] hdmitx: system: hpd irq = 32
210[ 0.451972@2] hdmitx: system: hdcp22_tx_skp failed to probe
211[ 0.451976@2] hdmitx: system: hdcp22_tx_esm failed to probe
212[ 0.452447@2] vout: vout1: register server: hdmitx_vout_server
213[ 0.452453@2] vout: vout2: register server: hdmitx_vout2_server
214[ 0.452980@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
215[ 0.452994@2] hdmitx: hdmitx20: Mapped PHY: 0xff634400
216[ 0.453002@2] hdmitx: hdmitx20: Mapped PHY: 0xff900000
217[ 0.453014@2] hdmitx: hdmitx20: Mapped PHY: 0xff800000
218[ 0.453022@2] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
219[ 0.453025@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
220[ 0.453030@2] hdmitx: hdmitx20: Mapped PHY: 0xff608000
221[ 0.453034@2] hdmitx: hdmitx20: Mapped PHY: 0xff600000
222[ 0.453042@2] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
223[ 0.453050@2] hdmitx: hw: alread display in uboot 0x10
224[ 0.453076@2] hdmitx: hw: avmute set to 1
225[ 0.453159@2] hdmitx: system: amhdmitx_probe end
226[ 0.453555@0] hdmitx: system: irq 80000002 0
227[ 0.453779@2] lcd: driver version: 20181012(8-sm1)
228[ 0.453895@2] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
229[ 0.454167@2] lcd: lcd_clktree_probe
230[ 0.454172@2] lcd: status: 0
231[ 0.454179@2] vout: vout1: register server: lcd_vout_server
232[ 0.454184@2] vout: vout2: register server: lcd_vout2_server
233[ 0.454188@2] lcd: lcd_get_config from dts
234[ 0.454197@2] lcd: no range_setting
235[ 0.454242@2] lcd: P070ACB_FT, mipi, 8bit, 600x1024
236[ 0.454254@2] lcd: pixel_clk = 49.434MHz, bit_rate = 395.472MHz
237[ 0.454498@2] lcd: lcd_fops_create OK
238[ 0.454536@2] lcd: request lcd_vsync_irq successful
239[ 0.454561@2] lcd: request lcd_vsync2_irq successful
240[ 0.454564@2] lcd: lcd_probe ok
241[ 0.454935@2] vout: create vout attribute OK
242[ 0.455060@2] vout: vout_fops_create OK
243[ 0.455064@2] vout: vout1: register server: nulldisp_vout_server
244[ 0.455154@2] vout: tvout monitor interval:500(ms), timeout cnt:20
245[ 0.455174@2] hdmitx: hdmitx_set_current_vmode[3772]
246[ 0.455177@2] hdmitx: system: recalc before 1080p60hz 60 1
247[ 0.455182@2] hdmitx: system: recalc after 1080p60hz 2997 50
248[ 0.455184@2] hdmitx: alread display in uboot
249[ 0.455186@2] vout: init mode 1080p60hz set ok
250[ 0.455189@2] vout: aml_tvout_mode_monitor
251[ 0.455199@2] vout: aml_vout_probe OK
252[ 0.455476@2] chip type:0x2b
253[ 0.455801@2] NO valid ramdump args:0 0
254[ 0.456822@1] Advanced Linux Sound Architecture Driver Initialized.
255[ 0.458317@1] NetLabel: Initializing
256[ 0.458325@1] NetLabel: domain hash size = 128
257[ 0.458327@1] NetLabel: protocols = UNLABELED CIPSOv4
258[ 0.458394@1] NetLabel: unlabeled traffic allowed by default
259[ 0.461460@1] clocksource: Switched to clocksource arch_sys_counter
260[ 0.518825@1] VFS: Disk quotas dquot_6.6.0
261[ 0.518951@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
262[ 0.531850@0] jtag: module init
263[ 0.532379@0] jtag: ao gpios not specified
264[ 0.532443@0] jtag: probe of jtag failed with error -22
265[ 0.533045@0] NET: Registered protocol family 2
266[ 0.533942@0] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
267[ 0.534130@0] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
268[ 0.534950@0] TCP: Hash tables configured (established 32768 bind 32768)
269[ 0.535079@0] UDP hash table entries: 2048 (order: 4, 65536 bytes)
270[ 0.535131@0] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
271[ 0.535438@0] NET: Registered protocol family 1
272[ 0.538330@0] wifi: power_on_pin_OD = 0;
273[ 0.538349@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
274[ 0.538627@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
275[ 0.538649@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
276[ 0.538655@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
277[ 0.538659@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
278[ 0.539037@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
279[ 0.539046@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
280[ 0.539051@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
281[ 0.539055@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
282[ 0.539058@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
283[ 0.539391@0] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
284[ 0.539543@0] aml_wifi wifi: [wifi_setup_dt] irq num is:(64)
285[ 0.539548@0] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
286[ 0.539570@0] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
287[ 0.539824@0] Unpacking initramfs...
288[ 0.562110@0] Freeing initrd memory: 4708K
289[ 0.564889@0] hw perfevents: clusterb_enabled = 0
290[ 0.564898@0] hw perfevents: cpumasks 0xf, 0x0
291[ 0.564954@0] hw perfevents: cluster A irq = 10
292[ 0.565085@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
293[ 0.569204@3] audit: initializing netlink subsys (disabled)
294[ 0.569352@3] audit: type=2000 audit(0.508:1): initialized
295[ 0.570484@0] workingset: timestamp_bits=46 max_order=20 bucket_order=0
296[ 0.579952@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
297[ 0.580178@0] Registering sdcardfs 0.1
298[ 0.581208@3] SELinux: Registering netfilter hooks
299[ 0.586228@0] NET: Registered protocol family 38
300[ 0.586256@0] Key type asymmetric registered
301[ 0.586260@0] Asymmetric key parser 'x509' registered
302[ 0.586631@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
303[ 0.586642@0] io scheduler noop registered (default)
304[ 0.586647@0] io scheduler deadline registered
305[ 0.586870@0] io scheduler cfq registered
306[ 0.591169@1] random: fast init done
307[ 0.591230@1] random: crng init done
308[ 0.591378@0] [drm] Initialized
309[ 0.591519@0] Unable to detect cache hierarchy for CPU 0
310[ 0.598627@1] loop: module loaded
311[ 0.599326@1] mtdoops: mtd device (mtddev=name/number) must be supplied
312[ 0.600344@1] libphy: Fixed MDIO Bus: probed
313[ 0.601546@1] REG0:Addr = ffffff8008411540
314[ 0.601564@1] ee eth reset:Addr = ffffff8008413008
315[ 0.601576@1] auto_cali_idx 0
316[ 0.602461@1] meson6-dwmac ff3f0000.ethernet: no reset control found
317[ 0.602470@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
318[ 0.602474@1] Ring mode enabled
319[ 0.602479@1] DMA HW capability register supported
320[ 0.602483@1] Normal descriptors
321[ 0.602485@1] RX Checksum Offload Engine supported
322[ 0.602487@1] COE Type 2
323[ 0.602489@1] TX Checksum insertion supported
324[ 0.602490@1] Wake-Up On Lan supported
325[ 0.602548@1] Enable RX Mitigation via HW Watchdog Timer
326[ 0.606036@0] libphy: stmmac: probed
327[ 0.606048@0] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
328[ 0.606052@0] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
329[ 0.609231@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
330[ 0.609239@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
331[ 0.610056@0] usbcore: registered new interface driver cdc_acm
332[ 0.610061@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
333[ 0.610162@0] usbcore: registered new interface driver usb-storage
334[ 0.610334@0] usbcore: registered new interface driver usbserial
335[ 0.610397@0] usbcore: registered new interface driver usbserial_generic
336[ 0.610456@0] usbserial: USB Serial support registered for generic
337[ 0.611090@3] mousedev: PS/2 mouse device common for all mice
338[ 0.611738@3] i2c /dev entries driver
339[ 0.615182@0] ledtrig-cpu: registered to indicate activity on CPUs
340[ 0.615943@0] hidraw: raw HID events driver (C) Jiri Kosina
341[ 0.616513@3] usbcore: registered new interface driver usbhid
342[ 0.616518@3] usbhid: USB HID core driver
343[ 0.618553@3] value of voltage_tolerance 0
344[ 0.618561@3] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
345[ 0.618607@3] value of gp1_clk_target 0
346[ 0.620115@3] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
347[ 0.622129@3] ff803000.serial: clock gate not found
348[ 0.622264@3] meson_uart ff803000.serial: ==uart0 reg addr = ffffff8008417000
349[ 0.622333@3] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 17, base_baud = 1500000) is a meson_uart
350[ 0.622359@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
351[ 0.660384@3] console [ttyS0] enabled
352[ 0.661732@1] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008419000
353[ 0.661827@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 31, base_baud = 1500000) is a meson_uart
354[ 0.665204@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff800841b000
355[ 0.666302@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff8008439080
356[ 0.669292@0] aml_dma ff63e000.aml_dma: Aml dma
357[ 0.671231@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
358[ 0.672523@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
359[ 0.672994@0] gpio-keypad ff800000.gpio_keypad: power key(116) registed.
360[ 0.673163@0] input: gpio_keypad as /devices/platform/ff800000.gpio_keypad/input/input0
361[ 0.673626@3] meson-remote: Driver init
362[ 0.674017@3] meson-remote: IR XMP protocol handler initialized
363[ 0.676912@3] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
364[ 0.677777@1] ge2d: ge2d_init_module
365[ 0.678205@1] ge2d: ge2d_dev major:237
366[ 0.678725@0] ge2d: clock source clk_ge2d_gate ffffffc0cf14e2c0
367[ 0.678784@0] ge2d: clock clk_ge2d source ffffffc0cf14e1c0
368[ 0.678810@0] ge2d: clock source clk_vapb_0 ffffffc0cf145cc0
369[ 0.678816@0] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
370[ 0.679053@0] ge2d: ge2d clock is 499 MHZ
371[ 0.679076@0] ge2d: find address resource
372[ 0.679103@0] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff80084b0000
373[ 0.679108@0] ge2d: reserved mem init failed
374[ 0.679111@0] ge2d: ge2d: pdev=ffffffc0cfe62800, irq=20, clk=ffffffc0cf14e2c0
375[ 0.679197@0] ge2d: ge2d start monitor
376[ 0.679309@0] ge2d: ge2d workqueue monitor start
377[ 0.679902@3] [tsync_pcr_init]init success.
378[ 0.680349@3] amvideom vsync irq: 36
379[ 0.681317@0] create_ge2d_work_queue video task ok
380[ 0.682046@0] amvideocap_probe,amvideocap
381[ 0.682112@0] use cma buf.
382[ 0.683403@0] fb: osd_init_module
383[ 0.683951@0] fb: viu vsync irq: 36
384[ 0.683961@0] fb: viu2 vsync irq: 44
385[ 0.684172@0] 0x000000db:Y=db,U=0,V=0
386[ 0.684174@0] 0x000000dc:Y=dc,U=0,V=0
387[ 0.684176@0] 0x000000dd:Y=dd,U=0,V=0
388[ 0.684178@0] 0x000000de:Y=de,U=0,V=0
389[ 0.684179@0] 0x000000df:Y=df,U=0,V=0
390[ 0.684181@0] 0x000000e0:Y=e0,U=0,V=0
391[ 0.684790@0] fb: osd_rdma_init: rdma_table p=0xd5448000,op=0xd5448000 , v=0xffffff80084a8000
392[ 0.684968@0] rdma_register, rdma_table_addr ffffff80084aa000 rdma_table_addr_phy d5449000 reg_buf ffffffc0cff83000
393[ 0.684971@0] rdma_register success, handle 2 table_size 4096
394[ 0.684975@0] fb: osd_rdma_init:osd rdma handle = 2.
395[ 0.685000@0] fb: mem_size: 0x800000
396[ 0.685001@0] fb: mem_size: 0x4b80000
397[ 0.685002@0] fb: mem_size: 0x100000
398[ 0.685003@0] fb: mem_size: 0x100000
399[ 0.685004@0] fb: mem_size: 0x800000
400[ 0.685215@0] meson-fb fb: assigned reserved memory node linux,meson-fb
401[ 0.685219@0] fb: reserved memory base:0x0000000077800000, size:800000
402[ 0.986223@0] hdmitx: system: plugin
403[ 1.117738@0] hdmitx: edid: EDID Parser:
404[ 1.117752@0] hdmitx: hdmitx: reach vesa idx MAX
405[ 1.117754@0] hdmitx: hdmitx: reach vesa idx MAX
406[ 1.117755@0] hdmitx: hdmitx: reach vesa idx MAX
407[ 1.117784@0] hdmitx: hdmitx: reach vesa idx MAX
408[ 1.117785@0] hdmitx: hdmitx: reach vesa idx MAX
409[ 1.117787@0] hdmitx: hdmitx: reach vesa idx MAX
410[ 1.117789@0] hdmitx: hdmitx: reach vesa idx MAX
411[ 1.117831@0] hdmitx: edid: get dtd0 vic: 3
412[ 1.117839@0] hdmitx: hdmitx: get PMT vic: 16
413[ 1.117843@0] hdmitx: edid: find IEEEOUT
414[ 1.117872@0] hdmitx: edid: check sum valid
415[ 1.117873@0] hdmitx: edid: check sum valid
416[ 1.117882@0] hdmitx: edid: update rx hdr info 0 at edid parsing
417[ 1.117884@0] hdmitx: edid: check sum valid
418[ 1.117885@0] hdmitx: edid: check sum valid
419[ 1.117892@0] hdmitx: edid: blk0 raw data
420[ 1.117912@0] hdmitx: edid:
421[ 1.117912@0] 00ffffffffffff0005e360228e000000321a010380301b782ae8b5a5564c9d23
422[ 1.117912@0] 115054bfef00d1c0b30095008180814081c001010101023a801871382d40582c
423[ 1.117912@0] 4500dd0c1100001e000000fd00324c1e5311000a202020202020000000fc0032
424[ 1.117912@0] 3236305747350a2020202020000000ff004b42454743314130303031343201a0
425[ 1.117912@0]
426[ 1.117912@0]
427[ 1.117917@0] hdmitx: edid: blk1 raw data
428[ 1.117935@0] hdmitx: edid:
429[ 1.117935@0] 02031ef14b101f051404130312021101230907078301000065030c0010008c0a
430[ 1.117935@0] d08a20e02d10103e9600dd0c11000018011d007251d01e206e285500dd0c1100
431[ 1.117935@0] 001e8c0ad08a20e02d10103e9600dd0c110000188c0ad090204031200c405500
432[ 1.117935@0] dd0c110000180000000000000000000000000000000000000000000000000045
433[ 1.117935@0]
434[ 1.117935@0]
435[ 1.117942@0] hdmitx: system: update physcial size: 480 270
436[ 1.117955@0] hdmitx: system: get current mode: 1080p60hz
437[ 1.117958@0] hdmitx: system: update rx hdr info 0
438[ 1.117960@0] hdmitx: system: update physcial size: 480 270
439[ 1.117993@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
440[ 1.117997@0] hdmitx: hw: set audio
441[ 1.118003@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0, hdev->aud_output_ch = 0
442[ 1.118018@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148352
443[ 1.118022@0] hdmitx: hw: aud_n_para = 5824
444[ 1.118030@0] hdmitx: hw: set channel status
445[ 1.219231@3] fb: fb def : 1920 1080 1920 2160 32
446[ 1.219241@3] fb: init fbdev bpp is:32
447[ 1.222895@2] clear:ec400000, free:ec400000, tick:738829 us
448[ 1.231956@0] fb: osd[0] enable: 1 (swapper/0)
449[ 1.250529@0] fb: set osd0 reverse as NONE
450[ 1.264982@0] fb: osd probe OK
451[ 1.265222@0] hdmitx: hdcp: hdmitx_hdcp_init
452[ 1.266169@0] vout: vout2: create vout2 attribute OK
453[ 1.266275@0] vout: vout2: vout2_fops_create OK
454[ 1.266471@0] vout: vout2: clktree_init
455[ 1.266475@0] vout: vout2: register server: nulldisp_vout2_server
456[ 1.266563@0] vout: vout2: init mode null set ok
457[ 1.266566@0] vout: vout2: aml_vout2_probe OK
458[ 1.266690@0] DI: di_module_init ok.
459[ 1.266695@0] DI: di_module_init: major 510
460[ 1.267498@0] deinterlace deinterlace: assigned reserved memory node linux,di_cma
461[ 1.267503@0] di:flag_cma=1
462[ 1.267506@0] DI: CMA size 0x2800000.
463[ 1.267523@0] pre_irq:52
464[ 1.267528@0] post_irq:53
465[ 1.267531@0] DI: di_probe allocate rdma channel 0.
466[ 1.267535@0] di_get_vpu_clkb: get clk vpu error.
467[ 1.267572@0] DI: vpu clkb <334000000, 667000000>
468[ 1.267612@0] get clkb rate:333333328
469[ 1.267619@0] DI:enable vpu clkb.
470[ 1.267629@0] 0x000000e1:Y=e1,U=0,V=0
471[ 1.267631@0] 0x000000e2:Y=e2,U=0,V=0
472[ 1.267632@0] 0x000000e3:Y=e3,U=0,V=0
473[ 1.267635@0] 0x000000f0:Y=f0,U=0,V=0
474[ 1.267636@0] 0x000000f1:Y=f1,U=0,V=0
475[ 1.267638@0] 0x000000f2:Y=f2,U=0,V=0
476[ 1.267641@0] 0x000000f3:Y=f3,U=0,V=0
477[ 1.267642@0] 0x000000f4:Y=f4,U=0,V=0
478[ 1.267643@0] 0x000000f5:Y=f5,U=0,V=0
479[ 1.267644@0] 0x000000f6:Y=f6,U=0,V=0
480[ 1.267648@0] 0x000000f7:Y=f7,U=0,V=0
481[ 1.267650@0] 0x000000f8:Y=f8,U=0,V=0
482[ 1.267651@0] 0x000000f9:Y=f9,U=0,V=0
483[ 1.267652@0] 0x000000fa:Y=fa,U=0,V=0
484[ 1.267654@0] 0x000000fb:Y=fb,U=0,V=0
485[ 1.267655@0] 0x000000fc:Y=fc,U=0,V=0
486[ 1.267659@0] 0x000000fd:Y=fd,U=0,V=0
487[ 1.267660@0] 0x000000fe:Y=fe,U=0,V=0
488[ 1.267661@0] 0x000000ff:Y=ff,U=0,V=0
489[ 1.267662@0] 0x0000003a:Y=3a,U=0,V=0
490[ 1.267664@0] 0x0000003b:Y=3b,U=0,V=0
491[ 1.267665@0] 0x0000003c:Y=3c,U=0,V=0
492[ 1.267668@0] 0x0000003d:Y=3d,U=0,V=0
493[ 1.267669@0] 0x0000003e:Y=3e,U=0,V=0
494[ 1.267671@0] 0x0000003f:Y=3f,U=0,V=0
495[ 1.267673@0] DI: support multi decoding 61~62~63.
496[ 1.267804@0] DI: di_probe:Di use HRTIMER
497[ 1.267895@0] di_probe:ok
498[ 1.267993@0] vdin_drv_init: major 509
499[ 1.268204@0] vdin_drv_init: vdin driver init done
500[ 1.268206@0] [viuin..]viuin_init_module viuin module init
501[ 1.268434@0] [viuin..]viuin_probe probe ok.
502[ 1.268920@0] [RX]-hdmirx: hdmirx_init.
503[ 1.268923@0] ESM HLD: Initializing...
504[ 1.269034@0] tvin_afe: tvafe_drv_init: major 507
505[ 1.269359@0] tvin_afe: tvafe_drv_init.
506[ 1.269547@0] tvafe_vbi: vbi: vbi_init.
507[ 1.269742@0] PPMGRDRV: warn: ppmgr module init func called
508[ 1.269847@0] PPMGRDRV: info: ppmgr_driver_probe called
509[ 1.269914@0] Reserved memory: failed to init DMA memory pool at 0x00000000eb000000, size 0 MiB
510[ 1.275304@0] PPMGRDRV: info: ppmgr_dev major:505
511[ 1.275644@0] picdec: picdec_driver_probe called.
512[ 1.275836@0] picdec: probe of picdec failed with error -22
513[ 1.276007@0] videosync_create_instance dev_s ffffffc0c30a4000,dev_s->dev ffffffc0c303f780
514[ 1.276009@0] videosync_create_instance reg videosync.0
515[ 1.276155@0] aml_vecm_init:module init
516[ 1.276159@1] videosync_thread started
517[ 1.276313@0]
518[ 1.276313@0] VECM probe start
519[ 1.276504@0] vlock_status_init vlock_en:0
520[ 1.276526@0] Can't find wb_sel.
521[ 1.276528@0] hdr:Can't find cfg_en_osd_100.
522[ 1.276531@0] amlogic, vecm
523[ 1.276534@0] vlock dt support: 1
524[ 1.276535@0] vlock dt new_fsm: 0
525[ 1.276537@0] vlock dt hwver: 0
526[ 1.276538@0] vlock dt phlock_en: 0
527[ 1.276541@0] Can't find vlock_en.
528[ 1.276542@0] Can't find vlock_mode.
529[ 1.276543@0] Can't find vlock_pll_m_limit.
530[ 1.276546@0] Can't find vlock_line_limit.
531[ 1.276555@0] param_config vlock_en:0
532[ 1.276576@0] aml_vecm_probe: ok
533[ 1.276624@0] amdolby_vision_init:module init
534[ 1.276912@0]
535[ 1.276912@0] amdolby_vision probe start & ver: 20181220
536[ 1.276918@0]
537[ 1.276918@0] cpu_id=2 tvmode=0
538[ 1.277027@0] dolby_vision_init_receiver(dvel)
539[ 1.277030@0] dolby_vision_init_receiver: dvel
540[ 1.277245@0] amdolby_vision_probe: ok
541[ 1.277850@0] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
542[ 1.279170@0] meson-mmc: >>>>>>>>hostbase ffffff80084dc000, dmode
543[ 1.281911@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
544[ 1.281914@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
545[ 1.321469@0] meson-mmc: meson_mmc_probe() : success!
546[ 1.335521@0] meson-mmc: >>>>>>>>hostbase ffffff80084e5000, dmode
547[ 1.336172@0] meson-mmc: gpio_cd = 1ca
548[ 1.373468@1] meson-mmc: meson_mmc_probe() : success!
549[ 1.376073@1] meson-mmc: >>>>>>>>hostbase ffffff80084ee000, dmode
550[ 1.376984@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
551[ 1.376987@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
552[ 1.413464@1] meson-mmc: meson_mmc_probe() : success!
553[ 1.413727@1] amlogic mtd driver init
554[ 1.414453@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
555[ 1.415155@1] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
556[ 1.415155@1]
557[ 1.420371@2] cectx ff80023c.aocec: compatible:amlogic, aocec-sm1
558[ 1.426046@2] cectx ff80023c.aocec: cecb_ver:0x2
559[ 1.430630@2] cectx ff80023c.aocec: line_reg:0x1
560[ 1.435219@2] cectx ff80023c.aocec: line_bit:0x3
561[ 1.439817@2] cectx ff80023c.aocec: ee_to_ao:0x1
562[ 1.444542@2] input: cec_input as /devices/virtual/input/input1
563[ 1.444667@2] cectx ff80023c.aocec: not find 'port_num'
564[ 1.449616@2] cectx ff80023c.aocec: using cec:0
565[ 1.454132@2] cectx ff80023c.aocec: no hdmirx regs
566[ 1.458878@2] cectx ff80023c.aocec: no hhi regs
567[ 1.463387@2] cectx ff80023c.aocec: not find 'output'
568[ 1.471541@2] cectx ff80023c.aocec: irq cnt:2
569[ 1.472946@2] cectx ff80023c.aocec: wakeup_reason:0x0
570[ 1.477850@2] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
571[ 1.483321@2] cectx ff80023c.aocec: aml_cec_probe success end
572[ 1.489372@2] unifykey: storage in base: 0xffffffc005000000
573[ 1.489374@2] unifykey: storage out base: 0xffffffc005040000
574[ 1.489375@2] unifykey: storage block base: 0xffffffc005080000
575[ 1.489377@2] unifykey: probe done!
576[ 1.489791@2] unifykey: no efuse-version set, use default value: -1
577[ 1.489795@2] unifykey: key unify config unifykey-num is 17
578[ 1.489841@2] unifykey: key unify fact unifykey-num is 17
579[ 1.489850@2] unifykey: unifykey_devno: 1f300000
580[ 1.490020@2] unifykey: device unifykeys created ok
581[ 1.490075@2] unifykey: aml_unifykeys_init done!
582[ 1.490261@2] meson ts init
583[ 1.490316@2] tsensor id: 0
584[ 1.490535@2] tsensor trim info: 0xfa00001a!
585[ 1.490537@2] tsensor hireboot: 0xc0ff2a70
586[ 1.490601@2] meson ts init
587[ 1.490626@2] tsensor id: 1
588[ 1.490765@2] tsensor trim info: 0xfa000072!
589[ 1.490767@2] tsensor hireboot: 0xc0ff2a30
590[ 1.490851@2] audio_dsp: [dsp]register dsp to char divece(257)
591[ 1.491005@2] amaudio: amaudio: driver amaudio init!
592[ 1.491304@2] amaudio: amaudio_init - amaudio: driver amaudio succuess!
593[ 1.491864@2] sysled: module init
594[ 1.492136@2] meson_wdt ffd0f0d0.watchdog: start watchdog
595[ 1.492140@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
596[ 1.492338@2] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
597[ 1.492881@2] amlogic rfkill init
598[ 1.492996@2] enter bt_probe of_node
599[ 1.493018@2] not get gpio_en
600[ 1.493023@2] power on valid level is high
601[ 1.493027@2] bt: power_on_pin_OD = 0;
602[ 1.493029@2] bt: power_off_flag = 1;
603[ 1.493031@2] dis power down = 0;
604[ 1.514966@0] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
605[ 1.514971@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
606[ 1.514974@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
607[ 1.514978@0] meson-mmc: Data 1 aligned delay is 0
608[ 1.514981@0] meson-mmc: emmc: clk 199999997 tuning start
609[ 1.517631@2] BLASTER Driver Init
610[ 1.518000@2] irblaster: probe
611[ 1.518678@2] dmc_monitor_probe
612[ 1.519172@2] defendkey ff630218.defendkey: Reserved memory is not enough!
613[ 1.519401@0] meson-mmc: emmc: rx_tuning_result[0] = 40
614[ 1.520420@2] defendkey: probe of ff630218.defendkey failed with error -22
615[ 1.520813@2] bl301_manager: driver init
616[ 1.520815@2] bl301_manager: IR remote wake-up code: 0xffffffff
617[ 1.520817@2] bl301_manager: IR remote wake-up code mask: 0xffffffff
618[ 1.520819@2] bl301_manager: IR remote wake-up code protocol: 0x0
619[ 1.520820@2] bl301_manager: enable 5V system power on suspend/power off state: 0
620[ 1.521597@0] meson-mmc: emmc: rx_tuning_result[1] = 40
621[ 1.523795@0] meson-mmc: emmc: rx_tuning_result[2] = 40
622[ 1.526033@0] meson-mmc: emmc: rx_tuning_result[3] = 40
623[ 1.528311@0] meson-mmc: emmc: rx_tuning_result[4] = 40
624[ 1.528315@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5
625[ 1.528317@0] meson-mmc: emmc: clk 199999997 tuning start
626[ 1.532937@0] meson-mmc: emmc: rx_tuning_result[0] = 40
627[ 1.535232@0] meson-mmc: emmc: rx_tuning_result[1] = 40
628[ 1.537525@0] meson-mmc: emmc: rx_tuning_result[2] = 40
629[ 1.539506@2] usbcore: registered new interface driver snd-usb-audio
630[ 1.539854@0] meson-mmc: emmc: rx_tuning_result[3] = 40
631[ 1.540774@2] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
632[ 1.540791@2] T9015 acodec used by auge, tdmout:1
633[ 1.542011@2] Error: Driver 'spdif-dit' is already registered, aborting...
634[ 1.542165@0] meson-mmc: emmc: rx_tuning_result[4] = 40
635[ 1.542168@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5
636[ 1.542170@0] meson-mmc: emmc: clk 199999997 tuning start
637[ 1.543597@2] asoc debug: aml_audio_controller_probe-127
638[ 1.545244@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 2
639[ 1.545265@2] snd_tdm ff660000.audiobus:tdm@0: lane_mask_out = 1, lane_oe_mask_out = 0
640[ 1.545315@2] snd_tdm ff660000.audiobus:tdm@0: neither mclk_pad nor mclk2pad set
641[ 1.545405@2] aml_tdm_platform_probe(), share en = 1
642[ 1.545407@2] No channel mask node Channel_Mask
643[ 1.545640@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 8
644[ 1.545713@2] TDM id 1 samesource_sel:3
645[ 1.545723@2] snd_tdm ff660000.audiobus:tdm@1: lane_mask_out = 1, lane_oe_mask_out = 0
646[ 1.545960@2] TDM id 1 output clk enable:1
647[ 1.545982@2] aml_tdm_platform_probe(), share en = 1
648[ 1.545986@2] No channel mask node Channel_Mask
649[ 1.545993@2] TDM id 1 tuning clk enable:1
650[ 1.546121@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
651[ 1.546137@2] snd_tdm ff660000.audiobus:tdm@2: lane_mask_out = 1, lane_oe_mask_out = 0
652[ 1.546271@2] aml_tdm_platform_probe(), share en = 1
653[ 1.546273@2] No channel mask node Channel_Mask
654[ 1.546358@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
655[ 1.546369@2] TDM id 2 i2s2hdmi:1
656[ 1.546374@2] snd_tdm ff660000.audiobus:i2s2hdmi: lane_mask_out = f, lane_oe_mask_out = 0
657[ 1.546406@2] snd_tdm ff660000.audiobus:i2s2hdmi: aml_tdm_get_pins error!
658[ 1.546408@2] aml_tdm_platform_probe(), share en = 1
659[ 1.546409@2] No channel mask node Channel_Mask
660[ 1.546613@0] meson-mmc: emmc: rx_tuning_result[0] = 40
661[ 1.546970@2] aml_spdif_platform_probe, spdif ID = 0
662[ 1.547257@2] SPDIF id 0 asrc_id:0 auto_asrc:0
663[ 1.547331@2] Spdif id 0 tuning clk enable:1
664[ 1.547334@2] spdifout_play_with_zerodata, spdif id:0 enable:0
665[ 1.547338@2] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
666[ 1.547343@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
667[ 1.547349@2] hdmitx: audio: aout notify format CT_PCM
668[ 1.547351@2] hdmitx: hw: set audio
669[ 1.547353@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
670[ 1.547366@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
671[ 1.547368@2] hdmitx: hw: aud_n_para = 5824
672[ 1.547375@2] hdmitx: hw: set channel status
673[ 1.547404@2] hdmitx: audio: Audio Type: PCM
674[ 1.547406@2] hdmitx: audio: set audio param
675[ 1.547409@2] spdif_a is set to enable
676[ 1.547422@2] aml_spdif_platform_probe, register soc platform
677[ 1.547455@2] aml_spdif_platform_probe, spdif ID = 1
678[ 1.547514@2] spdifout_play_with_zerodata, spdif id:1 enable:0
679[ 1.547518@2] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
680[ 1.547521@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
681[ 1.547527@2] spdif_b is set to enable
682[ 1.547534@2] aml_spdif_platform_probe, register soc platform
683[ 1.548102@2] meson-g12a-pinctrl pinctrl@ff634480: pin GPIOZ_2 already requested by ff3f0000.ethernet; cannot claim for ff660000.audiobus:pdm
684[ 1.548977@0] meson-mmc: emmc: rx_tuning_result[1] = 40
685[ 1.551175@0] meson-mmc: emmc: rx_tuning_result[2] = 40
686[ 1.553371@0] meson-mmc: emmc: rx_tuning_result[3] = 40
687[ 1.555566@0] meson-mmc: emmc: rx_tuning_result[4] = 40
688[ 1.555570@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5
689[ 1.555572@0] meson-mmc: emmc: clk 199999997 tuning start
690[ 1.555938@2] meson-g12a-pinctrl pinctrl@ff634480: pin-3 (ff660000.audiobus:pdm) status -22
691[ 1.559973@0] meson-mmc: emmc: rx_tuning_result[0] = 40
692[ 1.562166@0] meson-mmc: emmc: rx_tuning_result[1] = 40
693[ 1.564254@2] meson-g12a-pinctrl pinctrl@ff634480: could not request pin 3 (GPIOZ_2) from group pdm_din0_z on device pinctrl-meson
694[ 1.564362@0] meson-mmc: emmc: rx_tuning_result[2] = 40
695[ 1.566582@0] meson-mmc: emmc: rx_tuning_result[3] = 40
696[ 1.568778@0] meson-mmc: emmc: rx_tuning_result[4] = 40
697[ 1.568781@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5
698[ 1.568784@0] meson-mmc: emmc: clk 199999997 tuning start
699[ 1.571041@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
700[ 1.573238@0] meson-mmc: emmc: rx_tuning_result[1] = 40
701[ 1.575434@0] meson-mmc: emmc: rx_tuning_result[2] = 40
702[ 1.577638@0] meson-mmc: emmc: rx_tuning_result[3] = 40
703[ 1.579848@0] meson-mmc: emmc: rx_tuning_result[4] = 40
704[ 1.579851@0] meson-mmc: emmc: best_win_start =1, best_win_size =4
705[ 1.579855@0] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
706[ 1.580454@0] emmc: new HS200 MMC card at address 0001
707[ 1.583244@2] emmc: clock 199999997, 8-bit-bus-width
708[ 1.583244@2]
709[ 1.583244@2] snd_pdm ff660000.audiobus:pdm: Error applying setting, reverse things back
710[ 1.584881@0] mmcblk0: emmc:0001 DF4032 29.1 GiB
711[ 1.585038@0] mmcblk0boot0: emmc:0001 DF4032 partition 1 4.00 MiB
712[ 1.585182@0] mmcblk0boot1: emmc:0001 DF4032 partition 2 4.00 MiB
713[ 1.585312@0] mmcblk0rpmb: emmc:0001 DF4032 partition 3 4.00 MiB
714[ 1.587515@0] meson-mmc: Enter aml_emmc_partition_ops
715[ 1.588677@0] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
716[ 1.588678@0] meson-mmc: add_emmc_partition
717[ 1.588830@0] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
718[ 1.588929@0] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
719[ 1.589022@0] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
720[ 1.589122@0] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
721[ 1.589218@0] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
722[ 1.589316@0] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
723[ 1.589418@0] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
724[ 1.589661@0] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000
725[ 1.589764@0] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
726[ 1.589858@0] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
727[ 1.589957@0] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
728[ 1.590056@0] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
729[ 1.590167@0] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000
730[ 1.590264@0] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000
731[ 1.590354@0] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000
732[ 1.590448@0] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000046000000
733[ 1.590545@0] meson-mmc: [mmcblk0p17] odm offset 0x0000a3e00000, size 0x000008000000
734[ 1.590643@0] meson-mmc: [mmcblk0p18] system offset 0x0000ac600000, size 0x000050000000
735[ 1.590740@0] meson-mmc: [mmcblk0p19] product offset 0x0000fce00000, size 0x000008000000
736[ 1.590837@0] meson-mmc: [mmcblk0p20] data offset 0x000105600000, size 0x000642600000
737[ 1.590851@0] card key: card_blk_probe.
738[ 1.590855@0] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
739[ 1.590859@0] emmc key: emmc_key_init:205 ok.
740[ 1.591317@2] meson-mmc: amlmmc_dtb_init: register dtb chardev
741[ 1.591318@2] snd_pdm ff660000.audiobus:pdm: Can't get pdm pinmux
742[ 1.592995@0] meson-mmc: calc f7d4000, store f7d4000
743[ 1.595037@0] meson-mmc: calc f7d4000, store f7d4000
744[ 1.595038@0] meson-mmc: total valid 2
745[ 1.595260@0] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
746[ 1.595260@0] meson-mmc: Exit aml_emmc_partition_ops OK.
747[ 1.597867@2] audio_ddr_mngr: 0, irqs toddr 18, frddr 22
748[ 1.597870@2] audio_ddr_mngr: 1, irqs toddr 19, frddr 23
749[ 1.597872@2] audio_ddr_mngr: 2, irqs toddr 20, frddr 24
750[ 1.597873@2] audio_ddr_mngr: 3, irqs toddr 21, frddr 25
751[ 1.598282@2] datain_src:4, datain_chnum:2, datain_chumask:3
752[ 1.598284@2] datalb_src:1, datalb_chnum:2, datalb_chmask:3
753[ 1.598286@2] datain_lane_mask:0x1, datalb_lane_mask:0x1
754[ 1.598288@2] datalb_format: 1, chmask for lanes: 0x3
755[ 1.598614@2] loopback_platform_probe, p_loopback->id:0 register soc platform
756[ 1.598994@2] audiolocker_platform_probe
757[ 1.599593@2] effect_platform_probe, line:565
758[ 1.599710@2] eqdrc_clk_set, src pll:399999993, clk:199999997
759[ 1.599714@2] effect_platform_probe module:1, lane_mask:1, ch_mask:3
760[ 1.600441@2] vad_platform_probe vad data source sel:4, level:1
761[ 1.600583@2] input: vad_keypad as /devices/platform/soc/ff660000.audiobus/ff660000.audiobus:vad/input/input2
762[ 1.600955@2] Register vad
763[ 1.601315@2] EARC ff660000.audiobus:earc: Check whether support eARC TX
764[ 1.604046@2] EARC ff660000.audiobus:earc: Check whether support eARC TX
765[ 1.610696@2] EARC ff660000.audiobus:earc: Check whether support eARC TX
766[ 1.617372@2] EARC ff660000.audiobus:earc: Check whether support eARC TX
767[ 1.624063@2] EARC ff660000.audiobus:earc: platform get irq tx_cmdc failed, Check whether support eARC TX
768[ 1.633576@2] EARC ff660000.audiobus:earc: platform get irq tx_dmac failed, Check whether support eARC TX
769[ 1.643116@2] earc_platform_probe, register soc platform
770[ 1.849879@2] aml_dai_spdif_probe
771[ 1.849894@2] aml_dai_spdif_probe
772[ 1.849909@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
773[ 1.852028@2] snd_tdm ff660000.audiobus:i2s2hdmi: ASoC: Failed to add I2SIn CLK: -16
774[ 1.859753@2] aml_dai_tdm_probe, failed add snd tdm controls
775[ 1.865386@2] aml_dai_set_spdif_fmt , fmt 0x4000
776[ 1.865486@2] aml_spdif_new spdif_b, clk continuous:1
777[ 1.865489@2] spdifout_play_with_zerodata_free, spdif id:1
778[ 1.866327@2] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
779[ 1.866336@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
780[ 1.866340@2] lanes_out_cnt(1), lanes_in_cnt(1)
781[ 1.866341@2] lanes_lb_cnt(0)
782[ 1.866344@2] slots(2), slot_width(32)
783[ 1.866345@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
784[ 1.866362@2] asoc aml_dai_set_tdm_fmt, 0x4001, ffffffc0c312d218, id(1), clksel(1)
785[ 1.866370@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
786[ 1.867414@2] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok
787[ 1.867424@2] aml_dai_set_spdif_fmt , fmt 0x4000
788[ 1.867539@2] aml_spdif_new spdif_a, clk continuous:1
789[ 1.867542@2] spdifout_play_with_zerodata_free, spdif id:0
790[ 1.868397@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
791[ 1.868407@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
792[ 1.868408@2] lanes_out_cnt(4), lanes_in_cnt(0)
793[ 1.868411@2] lanes_lb_cnt(0)
794[ 1.868413@2] slots(2), slot_width(32)
795[ 1.868415@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
796[ 1.868427@2] asoc aml_dai_set_tdm_fmt, 0x4001, ffffffc0c3156018, id(2), clksel(2)
797[ 1.868432@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
798[ 1.869413@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok
799[ 1.871321@0] snd_card_add_kcontrols card:ffffffc0cfd4f818
800[ 1.871405@0] eq/drc v1 function enable
801[ 1.871411@0] no node audio_effect for eq/drc info!
802[ 1.871412@0] Failed to add audio effects v1 controls
803[ 1.871567@0] Netfilter messages via NETLINK v0.30.
804[ 1.871663@0] Initializing XFRM netlink socket
805[ 1.871679@0] NET: Registered protocol family 17
806[ 1.871705@0] Key type dns_resolver registered
807[ 1.872820@0] Registered swp emulation handler
808[ 1.872830@0] Registered cp15_barrier emulation handler
809[ 1.872836@0] Registered setend emulation handler
810[ 1.873299@0] registered taskstats version 1
811[ 1.880404@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
812[ 1.883115@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
813[ 1.883135@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
814[ 1.883695@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
815[ 1.883748@0] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000
816[ 1.883873@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
817[ 1.883879@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
818[ 1.883884@0] usb usb1: Product: xHCI Host Controller
819[ 1.883886@0] usb usb1: Manufacturer: Linux 4.9.113 xhci-hcd
820[ 1.883888@0] usb usb1: SerialNumber: xhci-hcd.0.auto
821[ 1.884333@0] hub 1-0:1.0: USB hub found
822[ 1.884356@0] hub 1-0:1.0: 2 ports detected
823[ 1.884643@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
824[ 1.884654@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
825[ 1.884725@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
826[ 1.884805@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
827[ 1.884811@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
828[ 1.884814@0] usb usb2: Product: xHCI Host Controller
829[ 1.884817@0] usb usb2: Manufacturer: Linux 4.9.113 xhci-hcd
830[ 1.884819@0] usb usb2: SerialNumber: xhci-hcd.0.auto
831[ 1.885176@0] hub 2-0:1.0: USB hub found
832[ 1.885195@0] hub 2-0:1.0: 1 port detected
833[ 1.885702@0] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:11 UTC (1420070411)
834[ 1.885991@0] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0cfd79000)
835[ 1.886016@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
836[ 1.886034@0] dwc_otg ff400000.dwc2_a: base=0xffffff8008b40000
837[ 1.886036@0] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0c323e400
838[ 1.986256@0] dwc_otg: Core Release: 3.30a
839[ 1.986260@0] dwc_otg: Setting default values for core params
840[ 1.986269@0] dwc_otg: curmode: 0, host_only: 0
841[ 1.986286@0] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
842[ 1.998498@0] dwc_otg: Using Buffer DMA mode
843[ 1.998504@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
844[ 1.998507@0] dwc_otg: Working on port type = SLAVE
845[ 1.998511@0] dwc_otg: Dedicated Tx FIFOs mode
846[ 2.000201@0] lcd extern: key_valid: 0
847[ 2.000205@0] lcd extern: lcd_extern_get_config from dts
848[ 2.000214@0] lcd extern: error: failed to get extern_5
849[ 2.000249@0] lcd extern: aml_lcd_extern_probe ok
850[ 2.001114@0] bl: chip type/name: (8-sm1)
851[ 2.001117@0] bl: key_valid: 0
852[ 2.001118@0] bl: aml_bl_config_load from dts
853[ 2.001123@0] bl: load: backlight_0
854[ 2.001129@0] bl error: failed to get bl_power_attr
855[ 2.001173@0] bl: bl pwm_port: PWM_F(5)
856[ 2.001177@0] bl: name = backlight_pwm
857[ 2.001178@0] bl: method = pwm(1)
858[ 2.001239@0] bl: register pwm_ch(5) 0xffffffc0cff74b40
859[ 2.001242@0] bl: aml_bl_pwm_channel_register ok
860[ 2.001508@0] bl: probe OK
861[ 2.002726@0] meson_cdev probe
862[ 2.002735@0] thermal: read gpupp failed
863[ 2.004394@0] meson_cdev index: 0
864[ 2.004512@0] thermal: read gpupp failed
865[ 2.008315@0] meson_cdev index: 1
866[ 2.008323@0] cpucore_cooling_register, max_cpu_core_num:4
867[ 2.008494@0] meson_cdev index: 2
868[ 2.008499@0] thermal: read gpupp failed
869[ 2.012159@0] meson_cdev index: 3
870[ 2.012230@0] find tzd id: 0
871[ 2.012355@0] find tzd id: 0
872[ 2.012393@0] meson_cdev probe done
873[ 2.012887@0] gxbb_pm: enter meson_pm_probe!
874[ 2.012913@0] gxbb_pm: meson_pm_probe done
875[ 2.013624@0] ALSA device list:
876[ 2.013629@0] #0: AML-AUGESOUND
877[ 2.014754@0] Freeing unused kernel memory: 4224K
878[ 2.053260@0] fb: malloc_osd_memory, cma:ffffff800a994748
879[ 2.053267@0] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
880[ 2.053288@0] fb: use ion buffer for fb memory, fb_index=0
881[ 2.053291@0] fb: OSD0 as afbcd mode,afbc_type=2
882[ 2.071461@0] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0c32a8800
883[ 2.071470@0] meson-fb fb: ion memory(0): created fb at 0x00000000ed800000, size 75 MiB
884[ 2.071474@0] fb: 0, phy: 0x00000000ed800000, vir:0xffffff800aa39000, size=77312K
885[ 2.071474@0]
886[ 2.071476@0] fb: Frame buffer memory assigned at
887[ 2.071479@0] fb: 0, phy: 0x00000000ed800000, vir:0xffffff800aa39000, size=77312K
888[ 2.071479@0]
889[ 2.071481@0] fb: 0, phy: 0x00000000ed800000, vir:0xffffff800aa39000, size=77312K
890[ 2.071481@0]
891[ 2.071484@0] fb: logo_index=0,fb_index=0
892[ 2.071486@0] fb: ---------------clear fb0 memory ffffff800aa39000
893[ 2.084940@0] fb: osd[0] canvas.idx =0x40
894[ 2.084942@0] fb: osd[0] canvas.addr=0xed800000
895[ 2.084945@0] fb: osd[0] canvas.width=7680
896[ 2.084946@0] fb: osd[0] canvas.height=2160
897[ 2.084948@0] fb: osd[0] frame.width=1920
898[ 2.084950@0] fb: osd[0] frame.height=1080
899[ 2.084951@0] fb: osd[0] out_addr_id =0x1
900[ 2.099435@0] fb: osd_release now.index=0,open_count=1
901[ 2.101206@0] fb: malloc_osd_memory, cma:ffffff800a994748
902[ 2.101212@0] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
903[ 2.101214@0] fb: use ion buffer for fb memory, fb_index=1
904[ 2.101216@0] fb: OSD1 as afbcd mode,afbc_type=2
905[ 2.101661@0] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0c32a8b40
906[ 2.101666@0] meson-fb fb: ion memory(1): created fb at 0x00000000f2400000, size 1 MiB
907[ 2.101671@0] fb: 1, phy: 0x00000000f2400000, vir:0xffffff8008cf5000, size=1024K
908[ 2.101671@0]
909[ 2.101673@0] fb: Frame buffer memory assigned at
910[ 2.101676@0] fb: 1, phy: 0x00000000f2400000, vir:0xffffff8008cf5000, size=1024K
911[ 2.101676@0]
912[ 2.101679@0] fb: 1, phy: 0x00000000f2400000, vir:0xffffff8008cf5000, size=1024K
913[ 2.101679@0]
914[ 2.101682@0] fb: logo_index=0,fb_index=1
915[ 2.101684@0] fb: ---------------clear fb1 memory ffffff8008cf5000
916[ 2.101862@0] fb: osd[1] canvas.idx =0x43
917[ 2.101863@0] fb: osd[1] canvas.addr=0xf2400000
918[ 2.101865@0] fb: osd[1] canvas.width=128
919[ 2.101866@0] fb: osd[1] canvas.height=32
920[ 2.101868@0] fb: osd[1] frame.width=32
921[ 2.101869@0] fb: osd[1] frame.height=32
922[ 2.101871@0] fb: osd[1] out_addr_id =0x2
923[ 2.116089@0] fb: osd_release now.index=1,open_count=1
924[ 2.132818@0] vfm_map_store:rm default
925[ 2.132818@0]
926[ 2.132878@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
927[ 2.132878@0]
928[ 2.132958@0] fb: osd[0] enable: 1 (sh)
929[ 2.149301@0] fb: osd[1] enable: 0 (sh)
930[ 2.182588@3] Console: switching to colour frame buffer device 240x67
931[ 2.203367@3] Checking disk(s): LABEL=COREELEC LABEL=STORAGE
932[ 2.209483@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
933[ 2.365210@0] usb 1-1: New USB device found, idVendor=0951, idProduct=1603
934[ 2.365217@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
935[ 2.365219@0] usb 1-1: Product: DataTraveler 2.0
936[ 2.365222@0] usb 1-1: Manufacturer: Kingston
937[ 2.365224@0] usb 1-1: SerialNumber: 89900000000000000000019C
938[ 2.366869@0] usb-storage 1-1:1.0: USB Mass Storage device detected
939[ 2.367217@0] scsi host0: usb-storage 1-1:1.0
940[ 2.629473@0] usb 1-2: new low-speed USB device number 3 using xhci-hcd
941[ 2.774215@0] usb 1-2: New USB device found, idVendor=413c, idProduct=2106
942[ 2.774218@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
943[ 2.774223@0] usb 1-2: Product: Dell QuietKey Keyboard
944[ 2.774225@0] usb 1-2: Manufacturer: DELL
945[ 2.784384@0] input: DELL Dell QuietKey Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:413C:2106.0001/input/input3
946[ 2.842100@0] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-xhci-hcd.0.auto-2/input0
947[ 3.386943@1] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
948[ 3.387897@2] sd 0:0:0:0: [sda] 1965056 512-byte logical blocks: (1.01 GB/960 MiB)
949[ 3.388105@1] sd 0:0:0:0: Attached scsi generic sg0 type 0
950[ 3.388140@2] sd 0:0:0:0: [sda] Write Protect is off
951[ 3.388145@2] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
952[ 3.388385@2] sd 0:0:0:0: [sda] No Caching mode page found
953[ 3.388389@2] sd 0:0:0:0: [sda] Assuming drive cache: write through
954[ 3.390718@2] sda: sda1 sda2
955[ 3.392025@2] sd 0:0:0:0: [sda] Attached SCSI removable disk
956[ 5.322235@3] fsck: CP437: Invalid argument
957[ 5.322342@3] fsck: STORAGE: recovering journal
958[ 5.322457@3] fsck: fsck.fat 3.0.28 (2015-05-16)
959[ 5.322581@3] fsck: /dev/sda1: 29 files, 25866/65501 clusters
960[ 5.322732@3] fsck: STORAGE: Superblock last mount time (Thu Apr 11 16:29:06 2019,
961[ 5.322863@3] fsck: now = Thu Jan 1 00:00:14 2015) is in the future.
962[ 5.322927@3] fsck: FIXED.
963[ 5.323081@3] fsck: STORAGE: 896/114688 files (1.6% non-contiguous), 57851/454144 blocks
964[ 5.787426@2] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
965[ 5.805617@2] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
966[ 5.894900@0] ### BIG FAT WARNING
967[ 5.894947@0] ### sda2 is removable. suspend/resume may not work
968[ 5.899494@0] ### BIG FAT WARNING
969[ 5.899541@0] ### sda1 is removable. suspend/resume may not work
970[ 6.310669@0] systemd[1]: System time before build time, advancing clock.
971[ 6.344707@0] cgroup: cgroup2: unknown option "nsdelegate"
972[ 6.350685@0] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
973[ 6.351240@0] systemd[1]: Detected architecture arm64.
974[ 6.357547@0] systemd[1]: Set hostname to <CoreELEC>.
975[ 6.407160@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
976[ 6.407172@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
977[ 6.455352@1] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
978[ 6.455405@1] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
979[ 6.486040@1] systemd[1]: Listening on udev Control Socket.
980[ 6.489996@1] systemd[1]: Starting Show Version...
981[ 6.490389@1] systemd[1]: Listening on udev Kernel Socket.
982[ 6.519020@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
983[ 6.615542@0] kernel-overlays-setup: setup base modules
984[ 6.752207@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.113
985[ 6.796681@0] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
986[ 6.796830@0] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
987[ 6.797832@0] kernel-overlays-setup: done
988[ 7.100565@3] media: Linux media interface: v0.10
989[ 7.129891@0] Linux video capture interface: v2.00
990[ 7.173814@1] amlvid:info: amlvideo_init called
991[ 7.173821@1] amlvid:info: amlvideo_create_instance called
992[ 7.173827@1] amlvid:info: v4l2_dev.name=:amlvideo-000
993[ 7.174013@1] amlvideo-000: V4L2 device registered as video10
994[ 7.174016@1] amlvid:info: amlvideo_create_instance called
995[ 7.174019@1] amlvid:info: v4l2_dev.name=:amlvideo-001
996[ 7.174133@1] amlvideo-001: V4L2 device registered as video23
997[ 7.176170@3] systemd-journald[2191]: Received request to flush runtime journal from PID 1
998[ 7.198591@1] media_clock: loading out-of-tree module taints kernel.
999[ 7.199846@1] register clk_set_setting cpu[43]
1000[ 7.201055@3] Registered firmware driver success.
1001[ 7.201901@3] Try to load video/h264_enc.bin ...
1002[ 7.201957@3] load firmware size : 76288, Name : video/h264_enc.bin.
1003[ 7.201966@3] the fw pack ver v0.0 is too lower.
1004[ 7.201968@3] it may work abnormally so need to be update in time.
1005[ 7.202633@3] Try to load video/video_ucode.bin ...
1006[ 7.203487@3] load firmware size : 1816576, Name : video/video_ucode.bin.
1007[ 7.203493@3] the fw pack ver v0.2 is too lower.
1008[ 7.203495@3] it may work abnormally so need to be update in time.
1009[ 7.228977@3] Amlogic A/V streaming port init
1010[ 7.231204@3] get gate demux control ok ffffffc0ce357e40
1011[ 7.231226@3] get gate parser_top control ok ffffffc0ce357ec0
1012[ 7.231254@3] get gate vdec control ok ffffffc0ce357f40
1013[ 7.231286@3] get gate clk_81 control ok ffffffc0ce357fc0
1014[ 7.231331@3] get gate clk_vdec_mux control ok ffffffc0cdd88040
1015[ 7.231374@3] get gate clk_hcodec_mux control ok ffffffc0cdd880c0
1016[ 7.231423@3] get gate clk_hevc_mux control ok ffffffc0cdd88140
1017[ 7.231476@3] get gate clk_hevcb_mux control ok ffffffc0cdd881c0
1018[ 7.231498@3] get gate ahbarb0 control ok ffffffc0cdd88240
1019[ 7.231505@3] get gate asyncfifo control failed (null)
1020[ 7.267764@2] amvdec_avs module init
1021[ 7.270369@2] amvdec_h264 module init
1022[ 7.408358@0] amvdec_h265 module init
1023[ 7.413353@0] ammvdec_h264 module init
1024[ 7.622631@0] ammvdec_mpeg12 module init
1025[ 7.625258@0] ammvdec_mpeg4_driver_init_module
1026[ 7.647786@2] decoder registered as /dev/video26
1027[ 7.654455@2] amvdec_vc1 module init
1028[ 7.658148@2] amvdec_vp9 module init
1029[ 7.663720@2] amvenc_avc_probe -- reserved memory config fail.
1030[ 7.663728@2] amvenc_avc - cma memory pool size: 60 MB
1031[ 7.663750@2] encode_wq_init.
1032[ 7.663755@2] encode start monitor.
1033[ 7.663880@2] encode workqueue monitor start.
1034[ 7.667850@3] vpu_init
1035[ 7.668087@3] vpu_probe
1036[ 7.668091@3] HevcEnc reserved memory config fail.
1037[ 7.668093@3] HevcEnc - cma memory pool size: 64 MB
1038[ 7.668121@3] HevcEnc - wave420l_irq: 42
1039[ 7.668190@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff800f97c000
1040[ 7.668451@3] success to probe vpu device with video memory from cma
1041[ 7.668843@0] NET: Registered protocol family 10
1042[ 7.674096@3] Triggered SDIO WiFi power on and bus rescan.
1043[ 7.674121@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
1044[ 7.997504@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
1045[ 8.314770@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
1046[ 8.314777@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
1047[ 8.315822@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
1048[ 8.315826@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
1049[ 8.320373@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
1050[ 8.320379@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
1051[ 8.321282@3] meson-aml-mmc ffe03000.sdio: card claims to support voltages below defined range
1052[ 8.324023@3] meson-mmc: actual_clock :0, HHI_nand: 0x80
1053[ 8.324028@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
1054[ 8.341535@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
1055[ 8.341543@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
1056[ 8.361096@3] meson-aml-mmc ffe03000.sdio: divider requested rate 170000000 != actual rate 166666664: ret=0
1057[ 8.361104@3] meson-mmc: actual_clock :166666664, HHI_nand: 0x80
1058[ 8.361106@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000246
1059[ 8.361110@3] meson-mmc: Data 1 aligned delay is 0
1060[ 8.361113@3] meson-mmc: sdio: clk 166666664 tuning start
1061[ 8.361978@3] meson-mmc: sdio: rx_tuning_result[0] = 40
1062[ 8.362792@3] meson-mmc: sdio: rx_tuning_result[1] = 40
1063[ 8.363629@3] meson-mmc: sdio: rx_tuning_result[2] = 40
1064[ 8.363654@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
1065[ 8.363679@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
1066[ 8.364466@3] meson-mmc: sdio: rx_tuning_result[5] = 40
1067[ 8.364469@3] meson-mmc: sdio: best_win_start =5, best_win_size =4
1068[ 8.364471@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000246,sd_emmc_regs->gadjust=0x12000
1069[ 8.365412@3] sdio: new ultra high speed SDR104 SDIO card at address 0001
1070[ 8.365416@0] sdio: clock 166666664, 4-bit-bus-width
1071[ 8.365416@0]
1072[ 8.366338@0] meson-mmc: [sdio_reinit] finish
1073[ 8.619487@0] fb: osd_release now.index=0,open_count=1
1074[ 8.619541@0] Console: switching to colour dummy device 80x25
1075[ 9.016887@1] Registered IR keymap rc-empty
1076[ 9.017312@1] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input4
1077[ 9.017620@1] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
1078[ 9.046743@3] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x110011
1079[ 9.046757@3] meson-ir ff808040.meson-ir: receiver initialized
1080[ 9.054829@3] lirc_dev: IR Remote Control driver registered, major 491
1081[ 9.064619@3] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
1082[ 9.064628@3] IR LIRC bridge handler initialized
1083[ 9.152923@3] mali ffe40000.bifrost: Continuing without Mali regulator control
1084[ 9.153060@3] mali ffe40000.bifrost: max pp is 2
1085[ 9.153063@3] mali ffe40000.bifrost: set min pp to default 1
1086[ 9.153066@3] mali ffe40000.bifrost: min pp is 1
1087[ 9.153068@3] mali ffe40000.bifrost: set min clk default to 0
1088[ 9.153071@3] mali ffe40000.bifrost: min clk is 0
1089[ 9.153088@3] mali ffe40000.bifrost: hiu io source 0xffffff800fa71000
1090[ 9.153094@3] mali ffe40000.bifrost: hiu io source 0xffffff800fa73000
1091[ 9.153097@3] mali ffe40000.bifrost: num of pp used most of time 1
1092[ 9.153099@3] mali ffe40000.bifrost: clock dvfs cfg table size is 6
1093[ 9.164072@3] mali ffe40000.bifrost: max clk set 4
1094[ 9.164080@3] mali ffe40000.bifrost: max clk is 4
1095[ 9.164083@3] mali ffe40000.bifrost: turbo clk set to 5
1096[ 9.164085@3] mali ffe40000.bifrost: turbo clk is 5
1097[ 9.164087@3] mali ffe40000.bifrost: default clk set to 4
1098[ 9.164089@3] mali ffe40000.bifrost: default clk is 4
1099[ 9.164096@3] mali ffe40000.bifrost: ====================0====================
1100[ 9.164096@3] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
1101[ 9.164100@3] mali ffe40000.bifrost: ====================1====================
1102[ 9.164100@3] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
1103[ 9.164104@3] mali ffe40000.bifrost: ====================2====================
1104[ 9.164104@3] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
1105[ 9.164108@3] mali ffe40000.bifrost: ====================3====================
1106[ 9.164108@3] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
1107[ 9.164112@3] mali ffe40000.bifrost: ====================4====================
1108[ 9.164112@3] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
1109[ 9.164115@3] mali ffe40000.bifrost: ====================5====================
1110[ 9.164115@3] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
1111[ 9.164118@3] mali ffe40000.bifrost: clock dvfs table size is 6
1112[ 9.164378@3] mali_plat=ffffff8001fbb5c0
1113[ 9.164885@3] find tzd id: 0
1114[ 9.164921@3] gpu cooling register okay with err=0
1115[ 9.170823@3] find tzd id: 0
1116[ 9.170843@3] gpu core cooling register okay with err=0
1117[ 9.170878@3] shader_present=1, tiler_present=1, l2_present=1
1118[ 9.170958@3] Mali_pwr_on:gpu_irq : 200
1119[ 9.171209@3] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
1120[ 9.191758@0] mali ffe40000.bifrost: Probed as mali0
1121[ 9.283502@0] [0] vcodec_dec decoder
1122[ 9.283700@0] [0] release decoder
1123[ 9.443547@0] IR NEC protocol handler initialized
1124[ 9.472704@2] IR RC6 protocol handler initialized
1125[ 10.038057@3] set mac for wol = 90:0e:b3:10:db:5b
1126[ 10.055720@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
1127[ 10.056160@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1128[ 10.916315@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1129[ 11.481479@2] vout: aml_tvout_mode_work: monitor_timeout
1130[ 13.113767@3] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
1131[ 13.113794@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1132[ 13.336017@3] 8021q: 802.1Q VLAN Support v1.8
1133[ 13.411875@2] the demux clock on, ref cnt: 1
1134[ 13.411885@2] the parser_top clock on, ref cnt: 1
1135[ 13.411889@2] the vdec clock on, ref cnt: 1
1136[ 13.411911@2] the clk_hevc_mux clock on, ref cnt: 1
1137[ 13.411915@2] the clk_hevcb_mux clock on, ref cnt: 1
1138[ 13.412015@2] hevc mux clock is 499999992 Hz
1139[ 13.412052@2] hevc back mux clock is 499999992 Hz
1140[ 13.412079@2] the clk_vdec_mux clock on, ref cnt: 1
1141[ 13.412117@2] vdec mux clock is 799999987 Hz
1142[ 13.412176@2] vdec_create instance ffffff801001f000, total 1
1143[ 13.412195@2] vdec_disable_DMC input->target= 0x0
1144[ 13.412198@2] vdec_release instance ffffff801001f000, total 1
1145[ 13.412228@2] the clk_vdec_mux clock off, ref cnt: 0
1146[ 13.412231@2] the vdec clock off, ref cnt: 0
1147[ 13.412233@2] the parser_top clock off, ref cnt: 0
1148[ 13.412237@2] the demux clock off, ref cnt: 0
1149[ 13.902226@3] aml_tdm_open
1150[ 13.902402@3] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1
1151[ 13.903627@3] tdm playback mute: 1, lane_cnt = 8
1152[ 13.903692@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1
1153[ 13.904239@1] aml_tdm_open
1154[ 13.904349@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1
1155[ 13.905325@1] tdm playback mute: 1, lane_cnt = 8
1156[ 13.905373@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1
1157[ 13.905913@1] aml_tdm_open
1158[ 13.906884@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1159[ 13.907241@1] tdm playback mute: 1, lane_cnt = 4
1160[ 13.907293@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1161[ 13.907810@1] aml_tdm_open
1162[ 13.907910@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1163[ 13.908175@1] tdm playback mute: 1, lane_cnt = 4
1164[ 13.908218@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1165[ 13.908704@1] aml_tdm_open
1166[ 13.908789@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1167[ 13.909100@1] tdm playback mute: 1, lane_cnt = 4
1168[ 13.909142@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1169[ 13.926515@1] aml_tdm_open
1170[ 13.926675@1] audio_ddr_mngr: frddrs[0] registered by device ff660000.audiobus:tdm@1
1171[ 13.928169@1] tdm playback mute: 1, lane_cnt = 8
1172[ 13.928226@1] audio_ddr_mngr: frddrs[0] released by device ff660000.audiobus:tdm@1
1173[ 13.928772@1] aml_tdm_open
1174[ 13.928893@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:i2s2hdmi
1175[ 13.930008@1] tdm playback mute: 1, lane_cnt = 4
1176[ 13.930071@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:i2s2hdmi
1177[ 13.930746@1] aml_spdif_open
1178[ 13.930871@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@0
1179[ 13.931395@1] spdif_a keep clk continuous
1180[ 13.931402@1] aml_spdif_close
1181[ 13.931450@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@0
1182[ 13.932024@1] aml_spdif_open
1183[ 13.932121@1] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1184[ 13.933176@1] spdif_b keep clk continuous
1185[ 13.933181@1] aml_spdif_close
1186[ 13.933225@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1187[ 13.941228@3] audio_dsp: buf=0
1188[ 13.941236@3] audio_dsp: IEC958_mode_raw=0
1189[ 13.941278@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1190[ 13.941282@3] audio_dsp: last mode 0,now 0
1191[ 13.945300@3] aml_spdif_open
1192[ 13.945481@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1193[ 13.946364@3] set normal 512 fs /4 fs
1194[ 13.946413@3] set spdifout clk:5644800, mpll:22579200
1195[ 13.946416@3] get spdifout clk:5644797, mpll:22579186
1196[ 13.946420@3] aml_dai_set_spdif_fmt , fmt 0x4000
1197[ 13.946422@3] set normal 512 fs /4 fs
1198[ 13.946438@3] set spdifout clk:5644800, mpll:22579200
1199[ 13.946441@3] get spdifout clk:5644797, mpll:22579186
1200[ 13.946524@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1201[ 13.946531@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1202[ 13.946533@3] hdmitx: hw: set audio
1203[ 13.946536@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1204[ 13.946550@3] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
1205[ 13.946553@3] hdmitx: hw: aud_n_para = 5824
1206[ 13.946562@3] hdmitx: hw: set channel status
1207[ 13.946593@3] hdmitx: audio: Audio Type: PCM
1208[ 13.946595@3] hdmitx: err chn msk, must larger than 0
1209[ 13.946597@3] hdmitx: hw: set audio
1210[ 13.946599@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1211[ 13.946609@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
1212[ 13.946610@3] hdmitx: hw: aud_n_para = 8918
1213[ 13.946617@3] hdmitx: hw: set channel status
1214[ 13.946645@3] hdmitx: audio: Audio Type: PCM
1215[ 13.946647@3] hdmitx: audio: set audio param
1216[ 13.946651@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1217[ 13.946911@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1218[ 13.946916@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1219[ 13.946917@3] hdmitx: err chn msk, must larger than 0
1220[ 13.946920@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1221[ 13.948420@3] spdif_b keep clk continuous
1222[ 13.948431@3] aml_spdif_close
1223[ 13.948497@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1224[ 13.994398@3] fb: osd_release now.index=0,open_count=1
1225[ 14.011147@3] fb: malloc_osd_memory, cma:ffffff800a994748
1226[ 14.011156@3] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
1227[ 14.011158@3] fb: use ion buffer for fb memory, fb_index=2
1228[ 14.011160@3] fb: OSD2 as afbcd mode,afbc_type=2
1229[ 14.016467@3] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0cb1e0400
1230[ 14.016476@3] meson-fb fb: ion memory(2): created fb at 0x00000000f2500000, size 1 MiB
1231[ 14.016481@3] fb: 2, phy: 0x00000000f2500000, vir:0xffffff8010069000, size=1024K
1232[ 14.016481@3]
1233[ 14.016483@3] fb: Frame buffer memory assigned at
1234[ 14.016487@3] fb: 2, phy: 0x00000000f2500000, vir:0xffffff8010069000, size=1024K
1235[ 14.016487@3]
1236[ 14.016489@3] fb: 2, phy: 0x00000000f2500000, vir:0xffffff8010069000, size=1024K
1237[ 14.016489@3]
1238[ 14.016493@3] fb: logo_index=0,fb_index=2
1239[ 14.016495@3] fb: ---------------clear fb2 memory ffffff8010069000
1240[ 14.016691@3] fb: osd[2] canvas.idx =0x41
1241[ 14.016692@3] fb: osd[2] canvas.addr=0xf2500000
1242[ 14.016694@3] fb: osd[2] canvas.width=128
1243[ 14.016695@3] fb: osd[2] canvas.height=32
1244[ 14.016697@3] fb: osd[2] frame.width=32
1245[ 14.016698@3] fb: osd[2] frame.height=32
1246[ 14.016700@3] fb: osd[2] out_addr_id =0x3
1247[ 14.027948@3] fb: vpu clkc clock is 199 MHZ
1248[ 14.027959@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 18
1249[ 14.027961@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 22
1250[ 14.027962@3] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53
1251[ 14.027969@3] fb: malloc_osd_memory, cma:ffffff800a994748
1252[ 14.027972@3] fb: malloc_osd_memory, 1228, base:0x0000000077800000, size:8388608
1253[ 14.027974@3] fb: use ion buffer for fb memory, fb_index=3
1254[ 14.027977@3] fb: OSD3 as afbcd mode,afbc_type=2
1255[ 14.034914@3] meson-fb fb: create ion_client ffffffc0c3041480, handle=ffffffc0cb1e0540
1256[ 14.034922@3] meson-fb fb: ion memory(3): created fb at 0x00000000f2600000, size 8 MiB
1257[ 14.034927@3] fb: 3, phy: 0x00000000f2600000, vir:0xffffff801016a000, size=8192K
1258[ 14.034927@3]
1259[ 14.034929@3] fb: Frame buffer memory assigned at
1260[ 14.034932@3] fb: 3, phy: 0x00000000f2600000, vir:0xffffff801016a000, size=8192K
1261[ 14.034932@3]
1262[ 14.034934@3] fb: 3, phy: 0x00000000f2600000, vir:0xffffff801016a000, size=8192K
1263[ 14.034934@3]
1264[ 14.034937@3] fb: logo_index=0,fb_index=3
1265[ 14.034939@3] fb: ---------------clear fb3 memory ffffff801016a000
1266[ 14.036483@3] fb: osd[3] canvas.idx =0x42
1267[ 14.036485@3] fb: osd[3] canvas.addr=0xf2600000
1268[ 14.036487@3] fb: osd[3] canvas.width=128
1269[ 14.036488@3] fb: osd[3] canvas.height=32
1270[ 14.036490@3] fb: osd[3] frame.width=32
1271[ 14.036491@3] fb: osd[3] frame.height=32
1272[ 14.036493@3] fb: osd[3] out_addr_id =0x4
1273[ 14.048096@3] vout: vmode set to null
1274[ 14.048262@3] fb: current vmode=1080p60hz, cmd: 0x10000
1275[ 14.048308@3] vout: new mode null set ok
1276[ 14.048311@3] fb: current vmode=null, cmd: 0x20000
1277[ 14.048428@3] hdmitx: system: set frac_rate_policy as 1
1278[ 14.048453@3] vout: vmode set to 1080p60hz
1279[ 14.048515@3] fb: current vmode=null, cmd: 0x10000
1280[ 14.048522@3] hdmitx: hdmitx_set_current_vmode[3772]
1281[ 14.048524@3] hdmitx: system: recalc before 1080p60hz 2997 50
1282[ 14.048527@3] hdmitx: system: recalc after 1080p60hz 2997 50
1283[ 14.048531@3] hdmitx: system: get current mode: 1080p60hz
1284[ 14.048533@3] hdmitx: system: update rx hdr info 0
1285[ 14.048536@3] hdmitx: system: update physcial size: 480 270
1286[ 14.048566@3] hdmitx: video: already init VIC = 0 Now VIC = 16
1287[ 14.048570@3] hdmitx: hw: div40: 0
1288[ 14.079474@3] hdmitx: ddc w1b error 0x54 0x20 0x00
1289[ 14.079485@3] hdmitx: frac_rate = 1
1290[ 14.079489@3] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 1
1291[ 14.079493@3] hdmitx: config HPLL = 5940000 frac_rate = 1
1292[ 14.079549@3] hdmitx: HPLLv1: 0xdb3a04f7
1293[ 14.079550@3] hdmitx: config HPLL done
1294[ 14.079556@3] hdmitx: set_hpll_od3_clk_div[610] div = 6
1295[ 14.079561@3] hdmitx: j = 4 vid_clk_div = 1
1296[ 14.079566@3] hdmitx: set enc for VIC: 16
1297[ 14.201477@3] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
1298[ 14.211590@3] hdmitx: video: Sink is HDMI device
1299[ 14.211623@3] hdmitx: hw: set audio
1300[ 14.211629@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1301[ 14.211640@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
1302[ 14.211642@3] hdmitx: hw: aud_n_para = 8918
1303[ 14.211649@3] hdmitx: hw: set channel status
1304[ 14.211678@3] hdmitx: audio: Audio Type: PCM
1305[ 14.211683@3] vout: new mode 1080p60hz set ok
1306[ 14.211687@3] fb: current vmode=1080p60hz, cmd: 0x20000
1307[ 14.211695@3] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
1308[ 14.211698@3] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
1309[ 14.228638@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1310[ 14.228641@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1311[ 14.245009@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1312[ 14.245010@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1313[ 14.279336@3] audio_dsp: buf=0
1314[ 14.279344@3] audio_dsp: IEC958_mode_raw=0
1315[ 14.279384@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1316[ 14.279386@3] audio_dsp: last mode 0,now 0
1317[ 14.283492@3] aml_spdif_open
1318[ 14.287024@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1319[ 14.295564@3] set normal 512 fs /4 fs
1320[ 14.295619@3] set spdifout clk:5644800, mpll:22579200
1321[ 14.295623@3] get spdifout clk:5644797, mpll:22579186
1322[ 14.295626@3] aml_dai_set_spdif_fmt , fmt 0x4000
1323[ 14.295628@3] set normal 512 fs /4 fs
1324[ 14.295644@3] set spdifout clk:5644800, mpll:22579200
1325[ 14.295646@3] get spdifout clk:5644797, mpll:22579186
1326[ 14.295705@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1327[ 14.295711@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1328[ 14.295713@3] hdmitx: err chn msk, must larger than 0
1329[ 14.295717@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1330[ 14.295937@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1331[ 14.295942@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1332[ 14.295944@3] hdmitx: err chn msk, must larger than 0
1333[ 14.295947@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1334[ 14.297197@3] spdif_b keep clk continuous
1335[ 14.297205@3] aml_spdif_close
1336[ 14.297278@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1337[ 14.809029@3] vout: vmode set to null
1338[ 14.809115@3] fb: current vmode=1080p60hz, cmd: 0x10000
1339[ 14.809168@3] vout: new mode null set ok
1340[ 14.809171@3] fb: current vmode=null, cmd: 0x20000
1341[ 14.809261@3] hdmitx: system: set frac_rate_policy as 1
1342[ 14.809285@3] vout: vmode set to 1080p60hz
1343[ 14.809317@3] fb: current vmode=null, cmd: 0x10000
1344[ 14.809323@3] hdmitx: hdmitx_set_current_vmode[3772]
1345[ 14.809326@3] hdmitx: system: recalc before 1080p60hz 2997 50
1346[ 14.809329@3] hdmitx: system: recalc after 1080p60hz 2997 50
1347[ 14.809334@3] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0x0a839720 (VIC: 16)
1348[ 14.809335@3] hdmitx: system: get current mode: 1080p60hz
1349[ 14.809338@3] hdmitx: system: update rx hdr info 0
1350[ 14.809340@3] hdmitx: system: update physcial size: 480 270
1351[ 14.809349@3] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0a839720 (VIC: 16)
1352[ 14.809351@3] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour
1353[ 14.809376@3] hdmitx: video: already init VIC = 0 Now VIC = 16
1354[ 14.809380@3] hdmitx: hw: div40: 0
1355[ 14.833691@0] hdmitx: system: irq 80000001 0
1356[ 14.835475@3] hdmitx: ddc w1b error 0x54 0x20 0x00
1357[ 14.835484@3] hdmitx: frac_rate = 1
1358[ 14.835487@3] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 1
1359[ 14.835492@3] hdmitx: config HPLL = 5940000 frac_rate = 1
1360[ 14.835549@3] hdmitx: HPLLv1: 0xdb3a04f7
1361[ 14.835550@3] hdmitx: config HPLL done
1362[ 14.835557@3] hdmitx: set_hpll_od3_clk_div[610] div = 6
1363[ 14.835563@3] hdmitx: j = 4 vid_clk_div = 1
1364[ 14.835569@3] hdmitx: set enc for VIC: 16
1365[ 14.835582@0] hdmitx: system: irq 80000001 0
1366[ 14.937477@3] hdmitx: [0x10000104]: 0x00000001
1367[ 14.937484@3] hdmitx: [0x10000180]: 0x000000ff
1368[ 14.937486@3] hdmitx: [0x10000181]: 0x000000ff
1369[ 14.937488@3] hdmitx: [0x10000182]: 0x00000003
1370[ 14.937489@3] hdmitx: [0x10000183]: 0x00000007
1371[ 14.937491@3] hdmitx: [0x10000184]: 0x0000003f
1372[ 14.937493@3] hdmitx: [0x10000185]: 0x00000002
1373[ 14.937495@3] hdmitx: [0x10000187]: 0x000000ff
1374[ 14.937497@3] hdmitx: [0x10000188]: 0x00000003
1375[ 14.957479@3] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
1376[ 14.967586@3] hdmitx: video: Sink is HDMI device
1377[ 14.967620@3] hdmitx: hw: set audio
1378[ 14.967625@3] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1379[ 14.967636@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
1380[ 14.967638@3] hdmitx: hw: aud_n_para = 8918
1381[ 14.967645@3] hdmitx: hw: set channel status
1382[ 14.967675@3] hdmitx: audio: Audio Type: PCM
1383[ 14.967680@3] vout: new mode 1080p60hz set ok
1384[ 14.967684@3] fb: current vmode=1080p60hz, cmd: 0x20000
1385[ 14.967691@3] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
1386[ 14.967693@3] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
1387[ 14.984620@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1388[ 14.984622@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1389[ 15.006428@3] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
1390[ 15.006431@3] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
1391[ 15.035525@3] audio_dsp: buf=0
1392[ 15.035533@3] audio_dsp: IEC958_mode_raw=0
1393[ 15.035571@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1394[ 15.035574@3] audio_dsp: last mode 0,now 0
1395[ 15.039623@3] aml_spdif_open
1396[ 15.039772@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1397[ 15.040652@3] set normal 512 fs /4 fs
1398[ 15.040699@3] set spdifout clk:5644800, mpll:22579200
1399[ 15.040702@3] get spdifout clk:5644797, mpll:22579186
1400[ 15.040704@3] aml_dai_set_spdif_fmt , fmt 0x4000
1401[ 15.040708@3] set normal 512 fs /4 fs
1402[ 15.040723@3] set spdifout clk:5644800, mpll:22579200
1403[ 15.040725@3] get spdifout clk:5644797, mpll:22579186
1404[ 15.040782@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1405[ 15.040790@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1406[ 15.040791@3] hdmitx: err chn msk, must larger than 0
1407[ 15.040797@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1408[ 15.040965@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1409[ 15.040970@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1410[ 15.040971@3] hdmitx: err chn msk, must larger than 0
1411[ 15.040973@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1412[ 15.042028@3] spdif_b keep clk continuous
1413[ 15.042038@3] aml_spdif_close
1414[ 15.042103@3] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1415[ 62.489485@0] fb: mem_free_work, free memory: addr:800000
1416[ 113.963902@3] audio_dsp: buf=0
1417[ 113.963910@3] audio_dsp: IEC958_mode_raw=0
1418[ 113.963945@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1419[ 113.963947@3] audio_dsp: last mode 0,now 0
1420[ 113.969212@0] aml_spdif_open
1421[ 113.969405@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1422[ 113.970710@3] set normal 512 fs /4 fs
1423[ 113.970761@3] set spdifout clk:5644800, mpll:22579200
1424[ 113.970765@3] get spdifout clk:5644797, mpll:22579186
1425[ 113.970768@3] aml_dai_set_spdif_fmt , fmt 0x4000
1426[ 113.970772@3] set normal 512 fs /4 fs
1427[ 113.970787@3] set spdifout clk:5644800, mpll:22579200
1428[ 113.970789@3] get spdifout clk:5644797, mpll:22579186
1429[ 113.970850@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1430[ 113.970856@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1431[ 113.970859@3] hdmitx: err chn msk, must larger than 0
1432[ 113.970865@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1433[ 113.971127@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1434[ 113.971133@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1435[ 113.971134@3] hdmitx: err chn msk, must larger than 0
1436[ 113.971138@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1437[ 113.972373@3] asoc-aml-card auge_sound: S/PDIF Playback enable
1438[ 114.072245@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1439[ 114.072356@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1440[ 114.072362@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1441[ 114.072364@0] hdmitx: err chn msk, must larger than 0
1442[ 114.072370@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1443[ 114.218171@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1444[ 114.317944@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1445[ 114.318050@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1446[ 114.318056@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1447[ 114.318058@0] hdmitx: err chn msk, must larger than 0
1448[ 114.318064@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1449[ 114.417682@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1450[ 114.517484@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1451[ 114.517560@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1452[ 114.517566@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1453[ 114.517567@0] hdmitx: err chn msk, must larger than 0
1454[ 114.517573@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1455[ 114.605023@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1456[ 114.704817@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1457[ 114.704926@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1458[ 114.704933@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1459[ 114.704935@0] hdmitx: err chn msk, must larger than 0
1460[ 114.704941@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1461[ 114.818822@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1462[ 114.918600@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1463[ 114.918686@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1464[ 114.918692@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1465[ 114.918694@0] hdmitx: err chn msk, must larger than 0
1466[ 114.918700@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1467[ 115.019330@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1468[ 115.119102@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1469[ 115.119182@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1470[ 115.119188@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1471[ 115.119190@0] hdmitx: err chn msk, must larger than 0
1472[ 115.119195@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1473[ 115.208587@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1474[ 115.308378@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1475[ 115.308474@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1476[ 115.308480@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1477[ 115.308481@0] hdmitx: err chn msk, must larger than 0
1478[ 115.308488@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1479[ 115.402782@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1480[ 115.502558@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1481[ 115.502635@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1482[ 115.502641@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1483[ 115.502643@0] hdmitx: err chn msk, must larger than 0
1484[ 115.502648@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1485[ 115.586482@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1486[ 115.686275@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1487[ 115.686355@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1488[ 115.686361@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1489[ 115.686363@0] hdmitx: err chn msk, must larger than 0
1490[ 115.686368@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1491[ 116.368946@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1492[ 116.468718@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1493[ 116.468799@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1494[ 116.468806@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1495[ 116.468807@0] hdmitx: err chn msk, must larger than 0
1496[ 116.468814@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1497[ 117.406124@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1498[ 117.505923@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1499[ 117.506012@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1500[ 117.506019@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1501[ 117.506021@0] hdmitx: err chn msk, must larger than 0
1502[ 117.506027@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1503[ 117.555212@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1504[ 117.654983@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1505[ 117.655063@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1506[ 117.655070@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1507[ 117.655071@0] hdmitx: err chn msk, must larger than 0
1508[ 117.655078@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1509[ 117.952376@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1510[ 118.252413@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1511[ 118.252490@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1512[ 118.252496@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1513[ 118.252498@0] hdmitx: err chn msk, must larger than 0
1514[ 118.252504@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1515[ 118.939124@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1516[ 119.038910@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1517[ 119.038998@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1518[ 119.039004@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1519[ 119.039006@0] hdmitx: err chn msk, must larger than 0
1520[ 119.039011@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1521[ 119.552080@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1522[ 119.852139@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1523[ 119.852238@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1524[ 119.852245@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1525[ 119.852246@0] hdmitx: err chn msk, must larger than 0
1526[ 119.852252@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1527[ 121.209031@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1528[ 121.308826@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1529[ 121.308918@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1530[ 121.308925@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1531[ 121.308926@0] hdmitx: err chn msk, must larger than 0
1532[ 121.308933@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1533[ 121.597468@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1534[ 121.897562@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1535[ 121.897713@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1536[ 121.897721@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1537[ 121.897723@0] hdmitx: err chn msk, must larger than 0
1538[ 121.897732@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1539[ 122.685684@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1540[ 122.785474@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1541[ 122.785552@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1542[ 122.785560@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1543[ 122.785563@0] hdmitx: err chn msk, must larger than 0
1544[ 122.785569@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1545[ 123.076292@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1546[ 123.376348@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1547[ 123.376438@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1548[ 123.376445@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1549[ 123.376446@0] hdmitx: err chn msk, must larger than 0
1550[ 123.376453@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1551[ 124.504756@1] asoc-aml-card auge_sound: S/PDIF Playback enable
1552[ 124.604560@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1553[ 124.604652@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1554[ 124.604658@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1555[ 124.604660@0] hdmitx: err chn msk, must larger than 0
1556[ 124.604666@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1557[ 124.678838@1] asoc-aml-card auge_sound: S/PDIF Playback enable
1558[ 124.778613@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1559[ 124.778695@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1560[ 124.778703@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1561[ 124.778705@1] hdmitx: err chn msk, must larger than 0
1562[ 124.778712@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1563[ 125.280482@1] asoc-aml-card auge_sound: S/PDIF Playback enable
1564[ 125.380270@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1565[ 125.380344@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1566[ 125.380352@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1567[ 125.380353@1] hdmitx: err chn msk, must larger than 0
1568[ 125.380360@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1569[ 125.518241@1] asoc-aml-card auge_sound: S/PDIF Playback enable
1570[ 125.618026@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1571[ 125.618105@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1572[ 125.618114@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1573[ 125.618116@1] hdmitx: err chn msk, must larger than 0
1574[ 125.618124@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1575[ 125.896042@1] asoc-aml-card auge_sound: S/PDIF Playback enable
1576[ 126.196091@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1577[ 126.196192@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1578[ 126.196200@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1579[ 126.196203@0] hdmitx: err chn msk, must larger than 0
1580[ 126.196209@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1581[ 127.147834@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1582[ 127.247622@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1583[ 127.247742@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1584[ 127.247749@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1585[ 127.247751@0] hdmitx: err chn msk, must larger than 0
1586[ 127.247757@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1587[ 127.714282@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1588[ 128.014322@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1589[ 128.014399@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1590[ 128.014405@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1591[ 128.014406@0] hdmitx: err chn msk, must larger than 0
1592[ 128.014412@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1593[ 128.784932@0] asoc-aml-card auge_sound: S/PDIF Playback enable
1594[ 129.085006@0] asoc-aml-card auge_sound: S/PDIF Playback disable
1595[ 129.085103@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1596[ 129.085110@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1597[ 129.085111@1] hdmitx: err chn msk, must larger than 0
1598[ 129.085118@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1599[ 129.885052@0] the demux clock on, ref cnt: 1
1600[ 129.885063@0] the parser_top clock on, ref cnt: 1
1601[ 129.885067@0] the vdec clock on, ref cnt: 1
1602[ 129.885117@0] vdec_create instance ffffff8010b56000, total 1
1603[ 129.885705@0] no drmmode
1604[ 129.885789@0] The fw has been loaded.
1605[ 129.885796@0] vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK
1606[ 129.891338@2] decoder_bmmu_box_alloc_box, tvp_flags = 0
1607[ 129.891727@2] [0]dynamic_buf_num_margin=8
1608[ 129.891733@2] [0]double_write_mode=2304
1609[ 129.891739@2] [0]h265:pts_unstable=0
1610[ 129.891743@2] [0]h265: ver (201602101,0) decinfo: 3840x1608 rate=4004
1611[ 129.892252@2] [LOCAL], the fw (hevc_mmu) will be loaded.
1612[ 129.892457@2] hevc mux clock is 799999987 Hz
1613[ 129.892515@2] hevc back mux clock is 799999987 Hz
1614[ 129.892520@2] hevc video changed to 3840 x 2160 60 fps clk->800MHZ
1615[ 129.893530@2] vfm map vdec-map-0 created
1616[ 129.893570@2] di_receiver_event_fun: vframe provider reg ppmgr
1617[ 129.896133@0] DI: reg f
1618[ 129.896260@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
1619[ 129.896267@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1620[ 129.896269@1] hdmitx: err chn msk, must larger than 0
1621[ 129.896276@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1622[ 129.896556@2] spdif_b keep clk continuous
1623[ 129.896565@2] aml_spdif_close
1624[ 129.896696@2] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1625[ 129.896900@2] audio_dsp: buf=0
1626[ 129.896904@2] audio_dsp: IEC958_mode_raw=0
1627[ 129.896946@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
1628[ 129.896948@2] audio_dsp: last mode 0,now 0
1629[ 129.904976@0] aml_spdif_open
1630[ 129.907634@3] vdec_init, vf_provider_name = vdec.h265.00
1631[ 129.909201@3] audio_ddr_mngr: frddrs[1] registered by device ff660000.audiobus:spdif@1
1632[ 129.909506@1] [0]vh265 cached=16384 need_size=16384 speed= 24 ms
1633[ 129.910556@1] [0]Bit depth luma = 10
1634[ 129.910562@1] [0]Bit depth chroma = 10
1635[ 129.910583@1] [0]set pic_list_init_flag 1
1636[ 129.911429@1] set normal 512 fs /4 fs
1637[ 129.911501@1] set spdifout clk:6144000, mpll:24576000
1638[ 129.911504@1] get spdifout clk:6143997, mpll:24575987
1639[ 129.911507@1] aml_dai_set_spdif_fmt , fmt 0x4000
1640[ 129.911511@1] set normal 512 fs /4 fs
1641[ 129.911530@1] set spdifout clk:6144000, mpll:24576000
1642[ 129.911531@1] get spdifout clk:6143997, mpll:24575987
1643[ 129.911615@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
1644[ 129.911622@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1645[ 129.911623@1] hdmitx: err chn msk, must larger than 0
1646[ 129.911628@1] hdmitx: hw: set audio
1647[ 129.911631@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
1648[ 129.911646@1] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
1649[ 129.911649@1] hdmitx: hw: aud_n_para = 5824
1650[ 129.911658@1] hdmitx: hw: set channel status
1651[ 129.911687@1] hdmitx: audio: Audio Type: PCM
1652[ 129.911690@1] hdmitx: audio: set audio param
1653[ 129.911694@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1654[ 129.911940@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
1655[ 129.911941@0] [0]init_buf_spec2 3840 1608
1656[ 129.911944@0] [0]set pic_list_init_flag to 2
1657[ 129.911988@1] [0]set pic_list_init_flag to 3
1658[ 129.913102@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1659[ 129.913105@1] hdmitx: err chn msk, must larger than 0
1660[ 129.913113@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1661[ 129.917582@1] [0]VH265: output first frame
1662[ 129.918421@3] asoc-aml-card auge_sound: S/PDIF Playback enable
1663[ 129.945485@0] DI bypass all 3840x1608-0x501000.
1664[ 129.949495@0]
1665[ 129.949495@0] [amvideo..] saturation_pre:0 hue_pre:0 mab:1000000
1666[ 130.268780@3] asoc-aml-card auge_sound: S/PDIF Playback disable
1667[ 130.268916@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
1668[ 130.268923@1] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
1669[ 130.268924@1] hdmitx: err chn msk, must larger than 0
1670[ 130.268931@1] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
1671[ 130.643814@1] spdif_b keep clk continuous
1672[ 130.643826@1] aml_spdif_close
1673[ 130.643892@1] audio_ddr_mngr: frddrs[1] released by device ff660000.audiobus:spdif@1
1674[ 130.651320@3] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
1675[ 130.651326@3] DI: di_receiver_event_fun: unreg
1676[ 130.651327@3] DI: provider name:(null)
1677[ 130.651367@3] DI: di_unreg_process unreg start 1.
1678[ 130.651378@3] use keep buffer keep frame!
1679[ 130.651386@3] vf_keep_current_locked: keep video successful!
1680[ 130.651390@3] video first pts = 0
1681[ 130.651391@3] VD1 AFBC 0x1700.
1682[ 130.651397@3] DI: di_unreg_process vf unreg cost 0 ms.
1683[ 130.651399@3] DI: di_unreg_process unreg stop 1.
1684[ 130.651431@3] DI: di_unreg_process_irq:cma release req time: -169408 ms
1685[ 130.651443@3] DI: no release nr ds mem.
1686[ 130.651446@3] di_cma_release:release 0 buffer use 0 ms(4294797888~4294797888)
1687[ 130.651450@3] di:no w
1688[ 130.651452@3] DI: unreg f
1689[ 130.651468@3] vdec_disable_DMC input->target= 0x1
1690[ 130.651887@1] [0]uninit list
1691[ 130.652126@3] vdec_release instance ffffff8010b56000, total 1
1692[ 130.652247@3] the vdec clock off, ref cnt: 0
1693[ 130.652252@3] the parser_top clock off, ref cnt: 0
1694[ 130.652255@3] the demux clock off, ref cnt: 0
1695[ 130.652550@3] the demux clock on, ref cnt: 1
1696[ 130.652555@3] the parser_top clock on, ref cnt: 1
1697[ 130.652558@3] the vdec clock on, ref cnt: 1
1698[ 130.652596@3] vdec_create instance ffffff8010ea1000, total 1
1699[ 130.659776@3] no drmmode
1700[ 130.659814@3] The fw has been loaded.
1701[ 130.659820@3] vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK
1702[ 130.660258@3] decoder_bmmu_box_alloc_box, tvp_flags = 0
1703[ 130.661915@3] [0]dynamic_buf_num_margin=8
1704[ 130.661923@3] [0]double_write_mode=2304
1705[ 130.661927@3] [0]h265:pts_unstable=0
1706[ 130.661931@3] [0]h265: ver (201602101,0) decinfo: 3840x1608 rate=4004
1707[ 130.664339@0] [LOCAL], the fw (hevc_mmu) will be loaded.
1708[ 130.664931@1] vfm map vdec-map-0 created
1709[ 130.664972@1] di_receiver_event_fun: vframe provider reg ppmgr
1710[ 130.666056@1] DI: reg f
1711[ 130.666269@1] vdec_init, vf_provider_name = vdec.h265.00
1712[ 130.668092@1] [0]vh265 cached=16384 need_size=16384 speed= 8 ms
1713[ 130.671159@1] [0]Bit depth luma = 10
1714[ 130.671166@1] [0]Bit depth chroma = 10
1715[ 130.671185@1] [0]set pic_list_init_flag 1
1716[ 130.672941@1] [0]init_buf_spec2 3840 1608
1717[ 130.672949@1] [0]set pic_list_init_flag to 2
1718[ 130.673002@1] [0]set pic_list_init_flag to 3
1719[ 130.679679@1] [0]VH265: output first frame
1720[ 131.077683@1] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
1721[ 131.077689@1] DI: di_receiver_event_fun: unreg
1722[ 131.077691@1] DI: provider name:(null)
1723[ 131.077724@1] di:no w
1724[ 131.078019@2] DI: di_unreg_process unreg start 1.
1725[ 131.078032@2] use keep buffer keep frame!
1726[ 131.078042@2] vf_keep_current_locked: keep video successful!
1727[ 131.078044@2] VD1 AFBC 0x1700.
1728[ 131.078050@2] DI: di_unreg_process vf unreg cost 0 ms.
1729[ 131.078052@2] DI: di_unreg_process unreg stop 1.
1730[ 131.078093@2] DI: di_unreg_process_irq:cma release req time: -168980 ms
1731[ 131.078117@1] DI: no release nr ds mem.
1732[ 131.078120@1] di_cma_release:release 0 buffer use 0 ms(4294798316~4294798316)
1733[ 131.078770@1] DI: unreg f
1734[ 131.078796@1] vdec_disable_DMC input->target= 0x1
1735[ 131.079329@0] [0]uninit list
1736[ 131.079601@1] vdec_release instance ffffff8010ea1000, total 1
1737[ 131.079710@1] the vdec clock off, ref cnt: 0
1738[ 131.079715@1] the parser_top clock off, ref cnt: 0
1739[ 131.079718@1] the demux clock off, ref cnt: 0
1740[ 131.079882@1] the demux clock on, ref cnt: 1
1741[ 131.079886@1] the parser_top clock on, ref cnt: 1
1742[ 131.079889@1] the vdec clock on, ref cnt: 1
1743[ 131.079931@1] vdec_create instance ffffff80111b3000, total 1
1744[ 131.079957@1] no drmmode
1745[ 131.079980@1] The fw has been loaded.
1746[ 131.079986@1] vdec_init, dev_name:ammvdec_h265, vdec_type=VDEC_TYPE_FRAME_BLOCK
1747[ 131.080433@1] decoder_bmmu_box_alloc_box, tvp_flags = 0
1748[ 131.080693@1] [0]dynamic_buf_num_margin=8
1749[ 131.080697@1] [0]double_write_mode=2304
1750[ 131.080700@1] [0]h265:pts_unstable=0
1751[ 131.080704@1] [0]h265: ver (201602101,0) decinfo: 3840x1608 rate=4004
1752[ 131.080978@1] [LOCAL], the fw (hevc_mmu) will be loaded.
1753[ 131.081659@1] vfm map vdec-map-0 created
1754[ 131.081689@1] di_receiver_event_fun: vframe provider reg ppmgr
1755[ 131.085914@2] DI: reg f
1756[ 131.087471@2] vdec_init, vf_provider_name = vdec.h265.00
1757[ 131.089518@1] [0]vh265 cached=24576 need_size=16384 speed= 12 ms
1758[ 131.095213@1] [0]Bit depth luma = 10
1759[ 131.095220@1] [0]Bit depth chroma = 10
1760[ 131.095249@1] [0]set pic_list_init_flag 1
1761[ 131.097205@1] [0]init_buf_spec2 3840 1608
1762[ 131.097213@1] [0]set pic_list_init_flag to 2
1763[ 131.097259@1] [0]set pic_list_init_flag to 3
1764[ 131.103982@1] [0]VH265: output first frame
1765[ 131.140273@0] DI bypass all 3840x1608-0x501000.
1766[ 131.150536@0] video first pts = 9a06e06
1767[ 131.150618@0] new frame show, free keeper
1768[ 131.169569@0] audit: type=1701 audit(1578158933.772:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=4101 comm="PeripBusUSBUdev" exe="/usr/lib/kodi/kodi.bin" sig=6
1769[ 131.169595@3] audit: type=1701 audit(1578158933.776:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=4101 comm="kodi.bin" exe="/usr/lib/kodi/kodi.bin" sig=11
1770[ 132.015908@2] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
1771[ 132.015914@2] DI: di_receiver_event_fun: unreg
1772[ 132.015915@2] DI: provider name:(null)
1773[ 132.015948@3] DI: di_unreg_process unreg start 1.
1774[ 132.015951@2] di:no w
1775[ 132.015962@3] keep exit is skip current
1776[ 132.015965@3] video first pts = 0
1777[ 132.015968@3] VD1 AFBC 0x0.
1778[ 132.015974@3] DI: di_unreg_process vf unreg cost 0 ms.
1779[ 132.015976@3] DI: di_unreg_process unreg stop 1.
1780[ 132.016020@3] di_unreg_process_irq disable di mirror image.
1781[ 132.016025@3] DI: di_unreg_process_irq:cma release req time: -168044 ms
1782[ 132.016039@3] DI: no release nr ds mem.
1783[ 132.016044@3] di_cma_release:release 0 buffer use 0 ms(4294799252~4294799252)
1784[ 132.016966@2] DI: unreg f
1785[ 132.016985@2] vdec_disable_DMC input->target= 0x1
1786[ 132.017495@3] [0]uninit list
1787[ 132.018362@0] vdec_release instance ffffff80111b3000, total 1
1788[ 132.018464@0] the vdec clock off, ref cnt: 0
1789[ 132.018469@0] the parser_top clock off, ref cnt: 0
1790[ 132.018472@0] the demux clock off, ref cnt: 0
1791[ 132.018767@0] fb: osd_release now.index=3,open_count=1
1792[ 132.018780@0] fb: osd_release now.index=2,open_count=1
1793[ 132.018789@0] fb: osd_release now.index=1,open_count=1
1794[ 132.018793@0] fb: osd_release now.index=0,open_count=1
1795CoreELEC:~ #