01dTgsF1

1Format: Log Type - Time(microsec) - Message - Optional Info
2Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
3S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.4-00252-S660LZB-1
4S - IMAGE_VARIANT_STRING=Sdm660LA
5S - OEM_IMAGE_VERSION_STRING=bqbot3
6S - Boot Interface: eMMC
7S - Secure Boot: Off
8S - Boot Config @ 0x00786070 = 0x000001c1
9S - JTAG ID @ 0x00786130 = 0x0008c0e1
10S - OEM ID @ 0x00786138 = 0x00000000
11S - Serial Number @ 0x00784138 = 0x702ff29d
12S - OEM Config Row 0 @ 0x00784188 = 0x0000000000000000
13S - OEM Config Row 1 @ 0x00784190 = 0x0000000000000000
14S - Feature Config Row 0 @ 0x007841a0 = 0x0050200010f80000
15S - Feature Config Row 1 @ 0x007841a8 = 0x00000000000008c0
16S - Core 0 Frequency, 3715 MHz
17S - PBL Patch Ver: 5
18S - I-cache: On
19S - D-cache: On
20B -         0 - PBL, Start
21B -      7069 - bootable_media_detect_entry, Start
22B -     69555 - bootable_media_detect_success, Start
23B -     69560 - elf_loader_entry, Start
24B -     71125 - auth_hash_seg_entry, Start
25B -     71456 - auth_hash_seg_exit, Start
26B -    121869 - elf_segs_hash_verify_entry, Start
27B -    171629 - elf_segs_hash_verify_exit, Start
28B -    171643 - auth_xbl_sec_hash_seg_entry, Start
29B -    200792 - auth_xbl_sec_hash_seg_exit, Start
30B -    200794 - xbl_sec_segs_hash_verify_entry, Start
31B -    207535 - xbl_sec_segs_hash_verify_exit, Start
32B -    207582 - PBL, End
33B -    233599 - SBL1, Start
34B -    357307 - usb: hs_phy_nondrive_start
35B -    357643 - usb: hs_phy_nondrive_finish
36B -    360510 - boot_flash_init, Start
37D -        30 - boot_flash_init, Delta
38B -    367860 - sbl1_ddr_set_default_params, Start
39D -       152 - sbl1_ddr_set_default_params, Delta
40B -    375851 - boot_config_data_table_init, Start
41B -    395341 - Using default CDT
42D -     14975 - boot_config_data_table_init, Delta - (0 Bytes)
43B -    397262 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
44B -    402722 - Image Load, Start
45D -       640 - Auth Metadata
46D -       458 - Segments hash check
47D -     12535 - PMIC Image Loaded, Delta - (34272 Bytes)
48B -    418612 - pm_device_init, Start
49B -    425810 - PM: PON REASON: PM0=0x8000028000000011:0x1000 PM1=0x8000088000000020:0x40 
50B -    468175 - PM: SET_VAL:Skip
51D -     45841 - pm_device_init, Delta
52B -    470096 - pm_driver_init, Start
53B -    477264 - PM: OCP Clearing for L4A is Skipped :PM660 is not supported the LDO4
54D -      4209 - pm_driver_init, Delta
55B -    484340 - pm_sbl_chg_init, Start
56B -    489830 - PM: Trigger FG IMA Reset
57B -    491233 - PM: Trigger FG IMA Reset.Completed
58B -    496052 - PM: EntryVbat: 4030; EntrySOC: -1
59B -    499315 - PM: BATT TEMP: 38 DegC
60D -     16256 - pm_sbl_chg_init, Delta
61B -    507062 - vsense_init, Start
62D -         0 - vsense_init, Delta
63B -    582641 - Pre_DDR_clock_init, Start
64D -       396 - Pre_DDR_clock_init, Delta
65D -         0 - sbl1_ddr_set_params, Delta
66B -    594353 - DSF version = 33.0, DSF RPM version = 22.0
67B -    594384 - Max Frequency = 1804 MHz
68B -    598501 - do_ddr_training, Start
69B -    610915 - Bootup frequency set to 1296000
70D -      8814 - do_ddr_training, Delta
71B -    630770 - clock_init, Start
72D -       305 - clock_init, Delta
73B -    633332 - Image Load, Start
74D -      2410 - APDP Image Loaded, Delta - (0 Bytes)
75B -    638792 - usb: EMMC Serial - 804dc94
76B -   1142591 - usb: chgr -  INVALID
77B -   1142621 - usb: fedl, chgr_det_timeout
78B -   1148142 - PM: 0: PON=0x11:USB_CHG:HARD_RESET: ON=0x80:PON_SEQ: POFF=0x2:PS_HOLD: OFF=0x80:POFF_SEQ: FAULT2=0x10:PBS_WD_TO
79B -   1148935 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ: FAULT1=0x40:UVLO
80B -   1160067 - PM: SMEM Chgr Info Write Success
81B -   1169248 - sbl1_efs_handle_cookies, Start
82D -       823 - sbl1_efs_handle_cookies, Delta
83B -   1177574 - Image Load, Start
84D -      2806 - Auth Metadata
85D -      1068 - Segments hash check
86D -     10614 - QSEE Dev Config Image Loaded, Delta - (41704 Bytes)
87B -   1190842 - Image Load, Start
88D -       610 - SEC Image Loaded, Delta - (4096 Bytes)
89B -   1199687 - Image Load, Start
90D -     23302 - Auth Metadata
91D -     17873 - Segments hash check
92D -     63623 - QSEE Image Loaded, Delta - (1938424 Bytes)
93B -   1265201 - Image Load, Start
94D -      2806 - Auth Metadata
95D -      3935 - Segments hash check
96D -     16866 - QHEE Image Loaded, Delta - (264944 Bytes)
97B -   1284080 - Image Load, Start
98D -      2928 - Auth Metadata
99D -      2165 - Segments hash check
100D -     16287 - RPM Image Loaded, Delta - (219324 Bytes)
101B -   1303112 - Image Load, Start
102D -      4362 - STI Image Loaded, Delta - (0 Bytes)
103B -   1311012 - Image Load, Start
104D -      2867 - Auth Metadata
105D -      1311 - Segments hash check
106D -     10919 - ABL Image Loaded, Delta - (105040 Bytes)
107B -   1324371 - Image Load, Start
108D -      3446 - Auth Metadata
109D -     13969 - Segments hash check
110D -     37301 - APPSBL Image Loaded, Delta - (1792000 Bytes)
111B -   1364082 - SBL1, End
112D -   1135393 - SBL1, Delta
113S - Flash Throughput, 88000 KB/s  (4405016 Bytes,  49888 us)
114S - DDR Frequency, 1296 MHz
115
116
117UEFI Start     [ 1533] SEC
118PROD Mode   : On
119DEBUG Mode : On
120ASLR        : On
121Timer Delta : +7 mS
122RAM Entry 0 : Base 0x0000000080000000  Size 0x0000000080000000
123RAM Entry 1 : Base 0x0000000100000000  Size 0x000000007E3C0000
124UEFI Ver    : 4.2.180130.BOOT.XF.1.4-00252-S660LZB-1
125Build Info  : 64b Jan 30 2018 15:14:53
126Boot Device : eMMC
127DALLOG Device [0x2000145]: Cannot turn on source[ACPL
1281, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, PmicDxe:: PmicSchgSetChargerDefaultSetting Setting ICL = 500 mA 
1291, PmicDxe:: PmicSchgInitialChargerCheckup APSD done status: 0, Port Type = 8 
1301, 1, 1, 1, QcomChargerDxe:: ChargerPlatform_Init Enabled WDOG.
131lcm Panel_CDP_GetID: temp1 =0;temp2 =1
132lcm Panel_CDP_GetID: lcdid  =1;
133lcm smd630 djn_hx83112a_video_xmldata !
134Render Splash  [ 1997]
135EnvDxe Render Callback
136LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 65537
137APC1 IDDQ WC 0 , L2:0, CPU[0]:175, CPU[1]:175, CPU[2]:175, CPU[3]:175
138 APC1 Total 700
139Load CPU 0 Slp: 0x87, Int: 0xFFFFFFFA
140Load CPU 1 Slp: 0x1, Int: 0x0
141Load CPU 2 Slp: 0xBF, Int: 0xFFFFFFD7
142Load CPU 3 Slp: 0x1, Int: 0x0
143GLD IDDQ WC 0
144CPU PART GOOD [0x0] SUB_BIN[0x0]
145-----------------------------
146Platform Init  [ 2129] BDS
147UEFI Ver   : 4.2.180130.BOOT.XF.1.4-00252-S660LZB-1
148Platform   : MTP
149Chip Name  : SDM660
150Chip Ver   : 1.0
151Core 0 Freq: 1382400 MHz
152-----------------------------
1532, ChargerLib:: ChargerLib_GetErrors Battery Presence = 1 
154ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 199902 
1552, ChargerLib:: ChargerLib_GetErrors Battery Presence = 1 
156ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 199902 
1572, ChargerLib:: ChargerLib_GetErrors Battery Presence = 1 
158ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 199902 
1592, ChargerLib:: ChargerLib_GetErrors Battery Presence = 1 
160ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 199902 
1612, ChargerLib:: ChargerLib_GetErrors Battery Presence = 1 
162ChargerLib:: ChargerLib_GetBatteryID BATT_ID_2 = 199902 
1632, 2, 2, 2, 2, 2, 2, 2, PmicDxe:: PmicSchgSetChargerDefaultSetting Setting ICL = 500 mA 
1642, UEFI Total : 632 ms
165POST Time      [ 2165] OS Loader
166Loader Build Info: Feb 26 2018 13:09:57
167VB: RWDeviceState: Succeed using devinfo!
168Recovery recovery: 436 
169Active Slot _a is bootable, retry count 4
170Booting from slot (_a)
171Loading Image Start : 2177 ms
172Loading Image Done : 2177 ms
173Total Image Read size : 2048 Bytes
174Loading Image Start : 2177 ms
175Loading Image Done : 2473 ms
176Total Image Read size : 50421760 Bytes
177VB: DeviceInit: Device is unlocked! Skipping verification!
178VB: VerifyImage: Image verification done! boot state is: ORANGE
179Exit key detection timer
180No Ffbm cookie found, ignore: Not Found
181Memory Base Address: 0x80000000
182Decompressing kernel image start: 12667 ms
183Decompressing kernel image done: 13010 ms
184 PON Reason is 17 cold_boot:1 charger path: 1
185GetCheckPanelPressGuid:checkPanel = 0x1;Status:0x0
186panel is Exist
187SecBootStatus=25,  androidboot.secureboot=0
188Cmdline: console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 earlycon=msm_serial_dm,0xc170000 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_l
189BootLinux: GetImage failed!Best match DTB tags 317/00000008/0x00000000/0/1001B/101011A/0/0/(offset)0x9A00A6DD/(size)0x000515A3
190Using pmic info 0x1001B/0x101011A/0x0/0x0 for device 0x1011B/0x102001A/0x0/0x0
191Memory Base Address: 0x80000000
192RAM Partitions
193Adding Base: 0x0000000080000000 Available Length: 0x0000000080000000 
194Adding Base: 0x0000000100000000 Available Length: 0x000000007E3C0000 
195kaslr-Seed is added to chosen node
196
197Shutting Down UEFI Boot Services: 13087 ms
198BDS: LogFs sync skipped, Unsupported
199App Log Flush : 14 ms
200Exit BS        [13106] UEFI End
201[    0.000000] Booting Linux on physical CPU 0x0
202[    0.000000] Initializing cgroup subsys cpuset
203[    0.000000] Initializing cgroup subsys cpu
204[    0.000000] Initializing cgroup subsys cpuacct
205[    0.000000] Initializing cgroup subsys schedtune
206[    0.000000] Linux version 4.4.78-perf+ (jenkins@bqbot2) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 26 13:20:15 CET 2018
207[    0.000000] Boot CPU: AArch64 Processor [51af8014]
208[    0.000000] Machine: Qualcomm Technologies, Inc. SDM 660 PM660 + PM660L MTP
209[    0.000000] earlycon: Early serial console at MMIO 0xc170000 (options '')
210[    0.000000] bootconsole [uart0] enabled
211[    0.000000] Reserved memory: reserved region for node 'wlan_msa_guard@85600000': base 0x0000000085600000, size 1 MiB
212[    0.000000] Reserved memory: reserved region for node 'wlan_msa_mem@85700000': base 0x0000000085700000, size 1 MiB
213[    0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 55 MiB
214[    0.000000] Reserved memory: reserved region for node 'modem_fw_region@8ac00000': base 0x000000008ac00000, size 126 MiB
215[    0.000000] Reserved memory: reserved region for node 'adsp_fw_region@92a00000': base 0x0000000092a00000, size 30 MiB
216[    0.000000] Reserved memory: reserved region for node 'pil_mba_region@94800000': base 0x0000000094800000, size 2 MiB
217[    0.000000] Reserved memory: reserved region for node 'cdsp_fw_region@94a00000': base 0x0000000094a00000, size 6 MiB
218[    0.000000] Reserved memory: reserved region for node 'splash_region@9d400000': base 0x000000009d400000, size 36 MiB
219[    0.000000] Reserved memory: allocated memory for 'venus_fw_region' node: base 0x000000009f800000, size 8 MiB
220[    0.000000] Reserved memory: created CMA memory pool at 0x000000009f800000, size 8 MiB
221[    0.000000] Reserved memory: initialized node venus_fw_region, compatible id shared-dma-pool
222[    0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff400000, size 8 MiB
223[    0.000000] Reserved memory: created CMA memory pool at 0x00000000ff400000, size 8 MiB
224[    0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
225[    0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f9800000, size 92 MiB
226[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f9800000, size 92 MiB
227[    0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
228[    0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000f8400000, size 20 MiB
229[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f8400000, size 20 MiB
230[    0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
231[    0.000000] Reserved memory: allocated memory for 'linux,cma' node: base 0x00000000f5800000, size 44 MiB
232[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 44 MiB
233[    0.000000] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
234[    0.000000] Removed memory: created DMA memory pool at 0x0000000085600000, size 1 MiB
235[    0.000000] Reserved memory: initialized node wlan_msa_guard@85600000, compatible id removed-dma-pool
236[    0.000000] Removed memory: created DMA memory pool at 0x0000000085700000, size 1 MiB
237[    0.000000] Reserved memory: initialized node wlan_msa_mem@85700000, compatible id removed-dma-pool
238[    0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 55 MiB
239[    0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
240[    0.000000] Removed memory: created DMA memory pool at 0x000000008ac00000, size 126 MiB
241[    0.000000] Reserved memory: initialized node modem_fw_region@8ac00000, compatible id removed-dma-pool
242[    0.000000] Removed memory: created DMA memory pool at 0x0000000092a00000, size 30 MiB
243[    0.000000] Reserved memory: initialized node adsp_fw_region@92a00000, compatible id removed-dma-pool
244[    0.000000] Removed memory: created DMA memory pool at 0x0000000094800000, size 2 MiB
245[    0.000000] Reserved memory: initialized node pil_mba_region@94800000, compatible id removed-dma-pool
246[    0.000000] Removed memory: created DMA memory pool at 0x0000000094a00000, size 6 MiB
247[    0.000000] Reserved memory: initialized node cdsp_fw_region@94a00000, compatible id removed-dma-pool
248[    0.000000] psci: probing for conduit method from DT.
249[    0.000000] psci: PSCIv1.0 detected in firmware.
250[    0.000000] psci: Using standard PSCI v0.2 function IDs
251[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
252[    0.000000] psci: Initializing psci_cpu_init
253[    0.000000] psci: Initializing psci_cpu_init
254[    0.000000] psci: Initializing psci_cpu_init
255[    0.000000] psci: Initializing psci_cpu_init
256[    0.000000] psci: Initializing psci_cpu_init
257[    0.000000] psci: Initializing psci_cpu_init
258[    0.000000] psci: Initializing psci_cpu_init
259[    0.000000] PERCPU: Embedded 21 pages/cpu @fffffff1be0b6000 s47872 r8192 d29952 u86016
260[    0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
261[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 969381
262[    0.000000] Kernel command line: rcupdate.rcu_expedited=1 console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 earlycon=msm_serial_dm,0xc170000 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sles
263[    0.000000] log_buf_len individual max cpu contribution: 131072 bytes
264[    0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
265[    0.000000] log_buf_len min size: 131072 bytes
266[    0.000000] log_buf_len: 1048576 bytes
267[    0.000000] early log buf free: 123972(94%)
268[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
269[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
270[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
271[    0.000000] software IO TLB [mem 0xfffbf000-0xfffff000] (0MB) mapped at [fffffff13ffbf000-fffffff13fffefff]
272[    0.000000] Memory: 3605892K/3939072K available (15870K kernel code, 2534K rwdata, 7608K rodata, 8192K init, 2921K bss, 157052K reserved, 176128K cma-reserved)
273[    0.000000] Virtual kernel memory layout:
274[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
275[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
276[    0.000000]       .init : 0xffffff876e000000 - 0xffffff876e800000   (  8192 KB)
277[    0.000000]       .text : 0xffffff876c880000 - 0xffffff876d800000   ( 15872 KB)
278[    0.000000]     .rodata : 0xffffff876d800000 - 0xffffff876e000000   (  8192 KB)
279[    0.000000]       .data : 0xffffff876e800000 - 0xffffff876ea79a30   (  2535 KB)
280[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
281[    0.000000]               0xffffffbe83000000 - 0xffffffbe86f8f000   (    63 MB actual)
282[    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
283[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
284[    0.000000]     memory  : 0xfffffff0c0000000 - 0xfffffff1be3c0000   (  4067 MB)
285[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
286[    0.000000] HMP scheduling enabled.
287[    0.000000] Preemptible hierarchical RCU implementation.
288[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
289[    0.000000] 
290[    0.000000] **********************************************************
291[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
292[    0.000000] **                                                      **
293[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
294[    0.000000] **                                                      **
295[    0.000000] ** This means that this is a DEBUG kernel and it is     **
296[    0.000000] ** unsafe for production use.                           **
297[    0.000000] **                                                      **
298[    0.000000] ** If you see this message and you are not debugging    **
299[    0.000000] ** the kernel, report this immediately to your vendor!  **
300[    0.000000] **                                                      **
301[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
302[    0.000000] **********************************************************
303[    0.000000] NR_IRQS:64 nr_irqs:64 0
304[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
305[    0.000000] MPM 1 irq mapping errored -517
306[    0.000000]  Offload RCU callbacks from all CPUs
307[    0.000000]  Offload RCU callbacks from CPUs: 0-7.
308[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
309[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
310[    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
311[    0.010762] clocksource: Switched to clocksource arch_sys_counter
312[    0.019945] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
313[    0.032805] pid_max: default: 32768 minimum: 301
314[    0.035456] Security Framework initialized
315[    0.040001] SELinux:  Initializing.
316[    0.043978] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
317[    0.047302] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
318[    0.054782] Initializing cgroup subsys memory
319[    0.061297] Initializing cgroup subsys freezer
320[    0.065977] /cpus/cpu@0: Missing clock-frequency property
321[    0.069954] /cpus/cpu@1: Missing clock-frequency property
322[    0.075449] /cpus/cpu@2: Missing clock-frequency property
323[    0.080819] /cpus/cpu@3: Missing clock-frequency property
324[    0.086188] /cpus/cpu@100: Missing clock-frequency property
325[    0.091582] /cpus/cpu@101: Missing clock-frequency property
326[    0.096953] /cpus/cpu@102: Missing clock-frequency property
327[    0.102521] /cpus/cpu@103: Missing clock-frequency property
328[    0.108061] CPU0: update cpu_capacity 1024
329[    0.113651] ASID allocator initialised with 65536 entries
330[    0.117881] NOHZ: local_softirq_pending 02
331[    0.131040] MSM Memory Dump base table set up
332[    0.131080] MSM Memory Dump apps data table set up
333[    0.139936] CPU1: update cpu_capacity 1024
334[    0.139992] CPU1: Booted secondary processor [51af8014]
335[    0.145112] CPU2: update cpu_capacity 1024
336[    0.145156] CPU2: Booted secondary processor [51af8014]
337[    0.150225] CPU3: update cpu_capacity 1024
338[    0.150269] CPU3: Booted secondary processor [51af8014]
339[    0.155849] CPU4: update cpu_capacity 1024
340[    0.155977] CPU4: Booted secondary processor [51af8002]
341[    0.161176] CPU5: update cpu_capacity 1024
342[    0.161234] CPU5: Booted secondary processor [51af8002]
343[    0.166638] CPU6: update cpu_capacity 1024
344[    0.166761] CPU6: Booted secondary processor [51af8002]
345[    0.172053] CPU7: update cpu_capacity 1024
346[    0.172114] CPU7: Booted secondary processor [51af8002]
347[    0.172229] Brought up 8 CPUs
348[    0.236062] SMP: Total of 8 processors activated.
349[    0.239192] CPU features: detected feature: GIC system register CPU interface
350[    0.243897] CPU: All CPU(s) started at EL1
351[    0.251071] alternatives: patching kernel code
352[    0.255106] CPU7: update max cpu_capacity 1024
353[    0.290774] CPU0: update max cpu_capacity 1024
354[    0.308336] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
355[    0.308396] futex hash table entries: 2048 (order: 5, 131072 bytes)
356[    0.324595] pinctrl core: initialized pinctrl subsystem
357[    0.325515] NET: Registered protocol family 16
358[    0.330505] schedtune: init normalization constants...
359[    0.333175] schedtune: disabled!
360[    0.338823] cpuidle: using governor ladder
361[    0.341709] cpuidle: using governor menu
362[    0.345584] cpuidle: using governor qcom
363[    0.350806] vdso: 2 pages (1 code @ ffffff876d806000, 1 data @ ffffff876e804000)
364[    0.354223] DMA: preallocated 256 KiB pool for atomic allocations
365[    0.363573] exit: IPA_USB init success!
366[    0.381794] unable to find DT imem DLOAD mode node
367[    0.383060] unable to find DT imem EDLOAD mode node
368[    0.387208] spmi spmi-0: PMIC arbiter version v3 (0x30000000)
369[    0.396243] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
370[    0.397449] msm_watchdog 17817000.qcom,wdt: wdog absent resource not present
371[    0.403001] msm_watchdog 17817000.qcom,wdt: MSM Watchdog Initialized
372[    0.410122] sps:sps is ready.
373[    0.417773] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
374[    0.419189] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
375[    0.432477] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
376[    0.439568] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
377[    0.449641] gpu-sdm660 5065000.clock-controller: Registered GPU RBCPR clocks
378[    0.464389] irq: no irq domain found for /soc/pinctrl@03000000 !
379[    0.470001] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
380[    0.477837] msm_rpm_dev_probe: APSS-RPM communication over GLINK
381[    0.482244] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
382[    0.499029] pm660l_l7: supplied by pm660_l10
383[    0.503708] platform cce0000.qcom,venus: assigned reserved memory node venus_fw_region
384[    0.505035] platform 15700000.qcom,lpass: assigned reserved memory node adsp_fw_region@92a00000
385[    0.510944] platform 1a300000.qcom,turing: assigned reserved memory node cdsp_fw_region@94a00000
386[    0.519552] platform 4080000.qcom,mss: assigned reserved memory node modem_fw_region@8ac00000
387[    0.539314] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
388[    0.540109] genirq: Setting trigger mode 8 for irq 102 failed (gic_set_type+0x0/0xb8)
389[    0.544819] genirq: Setting trigger mode 8 for irq 103 failed (gic_set_type+0x0/0xb8)
390[    0.552611] genirq: Setting trigger mode 8 for irq 104 failed (gic_set_type+0x0/0xb8)
391[    0.560402] genirq: Setting trigger mode 8 for irq 105 failed (gic_set_type+0x0/0xb8)
392[    0.568233] genirq: Setting trigger mode 8 for irq 106 failed (gic_set_type+0x0/0xb8)
393[    0.584664] __of_mpm_init(): MPM driver mapping exists
394[    0.585323] i2c-msm-v2 c175000.i2c: probing driver i2c-msm-v2
395[    0.588958] i2c-msm-v2 c175000.i2c: error on clk_get(core_clk):-517
396[    0.594691] i2c-msm-v2 c175000.i2c: error probe() failed with err:-517
397[    0.601273] i2c-msm-v2 c176000.i2c: probing driver i2c-msm-v2
398[    0.607425] i2c-msm-v2 c176000.i2c: error on clk_get(core_clk):-517
399[    0.613178] i2c-msm-v2 c176000.i2c: error probe() failed with err:-517
400[    0.619772] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
401[    0.625940] i2c-msm-v2 c1b6000.i2c: error on clk_get(core_clk):-517
402[    0.631651] i2c-msm-v2 c1b6000.i2c: error probe() failed with err:-517
403[    0.651683] irq: no irq domain found for /soc/qcom,mdss_mdp@c900000 !
404[    0.654701] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
405[    0.657500] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
406[    0.663800] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
407[    0.677123] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
408[    0.684235] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
409[    0.697040] qcom-clk-smd-rpm soc:qcom,rpmcc: Registered RPM clocks
410[    0.709398] gcc-sdm660 100000.clock-controller: Registered GCC clocks
411[    0.728167] mmcc-sdm660 c8c0000.clock-controller: Registered MMSS clocks
412[    0.731855] cpr4_sdm660_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 0
413[    0.734314] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 585000 uV
414[    0.741399] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 645000 uV
415[    0.750828] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 725000 uV
416[    0.760432] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 790000 uV
417[    0.770126] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[4] open-loop= 870000 uV
418[    0.779736] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[5] open-loop= 925000 uV
419[    0.789697] cpr3_regulator_init_ctrl: gfx: Default CPR mode = open-loop
420[    0.800560] cprh_kbss_read_fuse_data: apc0_pwrcl_corner: speed bin = 1
421[    0.805649] cprh_sdm660_kbss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
422[    0.812221] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused   LowSVS: open-loop= 614000 uV
423[    0.819981] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused      SVS: open-loop= 634000 uV
424[    0.829730] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused  SVSPLUS: open-loop= 688000 uV
425[    0.839448] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused      NOM: open-loop= 758000 uV
426[    0.849169] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO_L1: open-loop= 908000 uV
427[    0.858961] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused   LowSVS: quot[ 7]= 350
428[    0.868614] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused      SVS: quot[ 7]= 384, quot_offset[ 7]=  30
429[    0.877647] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused  SVSPLUS: quot[ 7]= 470, quot_offset[ 7]=  85
430[    0.888669] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused      NOM: quot[ 7]= 589, quot_offset[ 7]= 115
431[    0.899520] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO_L1: quot[ 7]= 816, quot_offset[ 7]= 225
432[    0.911806] cpr3_regulator_init_ctrl: apc0: Default CPR mode = full HW closed-loop
433[    0.922414] cprh_kbss_read_fuse_data: apc1_perfcl_corner: speed bin = 1
434[    0.928652] cprh_sdm660_kbss_read_fuse_data: apc1_perfcl_corner: CPR fusing revision = 2
435[    0.935246] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused      SVS: open-loop= 664000 uV
436[    0.943471] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused  SVSPLUS: open-loop= 708000 uV
437[    0.953255] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused      NOM: open-loop= 778000 uV
438[    0.963060] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused    TURBO: open-loop= 868000 uV
439[    0.972867] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused TURBO_L2: open-loop= 908000 uV
440[    0.982743] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused      SVS: quot[ 7]= 533
441[    0.992487] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused  SVSPLUS: quot[ 7]= 619, quot_offset[ 7]=  85
442[    1.001257] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused      NOM: quot[ 7]= 766, quot_offset[ 7]= 145
443[    1.012366] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused    TURBO: quot[ 7]= 923, quot_offset[ 7]= 155
444[    1.023310] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused TURBO_L2: quot[ 7]= 998, quot_offset[ 7]=  75
445[    1.035508] cpr3_regulator_init_ctrl: apc1: Default CPR mode = full HW closed-loop
446[    1.047202] i2c-msm-v2 c175000.i2c: probing driver i2c-msm-v2
447[    1.052981] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
448[    1.058441] i2c-msm-v2 c175000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
449[    1.068512] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
450[    1.077239] i2c-msm-v2 c176000.i2c: probing driver i2c-msm-v2
451[    1.085959] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
452[    1.091465] i2c-msm-v2 c176000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
453[    1.101505] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
454[    1.110336] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
455[    1.118949] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
456[    1.124452] i2c-msm-v2 c1b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
457[    1.134551] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
458[    1.142745] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
459[    1.152394] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
460[    1.158546] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
461[    1.171700] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
462[    1.185059] msm-thermal soc:qcom,msm-thermal: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,limit-temp. err=-22. KTM continues
463[    1.198073] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
464[    1.211805] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
465[    1.227600] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
466[    1.238862] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
467[    1.240869] gpucc-sdm660 5065000.gfx: Registered GPUCC clocks
468[    1.242706] clk-cpu-osm 179c0000.qcom,clk-cpu-660: using pwrcl speed bin 1 and pvs_ver 0
469[    1.242741] clk-cpu-osm 179c0000.qcom,clk-cpu-660: using perfcl speed bin 1 and pvs_ver 0
470[    1.244690] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu0
471[    1.244997] add_opp: Set OPP pair (1843200000 Hz, 900000 uv) on cpu0
472[    1.245021] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu1
473[    1.245170] add_opp: Set OPP pair (1843200000 Hz, 900000 uv) on cpu1
474[    1.245204] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu2
475[    1.245340] add_opp: Set OPP pair (1843200000 Hz, 900000 uv) on cpu2
476[    1.245374] add_opp: Set OPP pair (300000000 Hz, 612000 uv) on cpu3
477[    1.245513] add_opp: Set OPP pair (1843200000 Hz, 900000 uv) on cpu3
478[    1.245549] add_opp: Set OPP pair (300000000 Hz, 680000 uv) on cpu4
479[    1.245671] add_opp: Set OPP pair (2208000000 Hz, 928000 uv) on cpu4
480[    1.245693] add_opp: Set OPP pair (300000000 Hz, 680000 uv) on cpu5
481[    1.245825] add_opp: Set OPP pair (2208000000 Hz, 928000 uv) on cpu5
482[    1.245849] add_opp: Set OPP pair (300000000 Hz, 680000 uv) on cpu6
483[    1.245969] add_opp: Set OPP pair (2208000000 Hz, 928000 uv) on cpu6
484[    1.246005] add_opp: Set OPP pair (300000000 Hz, 680000 uv) on cpu7
485[    1.246128] add_opp: Set OPP pair (2208000000 Hz, 928000 uv) on cpu7
486[    1.246427] clk_cpu_osm_driver_probe: OSM driver inited
487[    1.246467] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
488[    1.383991] ACPI: Interpreter disabled.
489[    1.388664] KPI: Bootloader start count = 71229
490[    1.392110] KPI: Bootloader end count = 429803
491[    1.396605] KPI: Bootloader display count = 2390527534
492[    1.401131] KPI: Bootloader load kernel count = 9674
493[    1.406243] KPI: Kernel MPM timestamp = 509897
494[    1.411370] KPI: Kernel MPM Clock frequency = 32768
495[    1.415626] socinfo_print: v0.11, id=317, ver=1.0, raw_id=140, raw_ver=0, hw_plat=8, hw_plat_ver=65536
496[    1.415626]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65563, pmic_die_revision=65537 foundry_id=3 serial_number=1882190493 num_pmics=2
497[    1.420438] msm_bus_fabric_init_driver
498[    1.452298] msm_bus_dev_init_qos: Skipping QOS init for 1
499[    1.452344] msm_bus_dev_init_qos: Skipping QOS init for 727msm_bus_dev_init_qos: Skipping QOS init for 728
500[    1.463008] cam_avdd_gpio_regulator: supplied by pm660l_bob
501[    1.466456] cam_actuator_regulator: supplied by pm660l_bob
502[    1.471864] cam_dvdd_gpio_regulator: supplied by pm660_s5
503[    1.477370] cam_rear_dvdd_gpio_regulator: supplied by pm660_s5
504[    1.482802] vgaarb: loaded
505[    1.488530] qcom,qpnp-misc 800f000.qcom,spmi:qcom,pm660@0:qcom,misc@900: probe successful
506[    1.491740] SCSI subsystem initialized
507[    1.499656] usbcore: registered new interface driver usbfs
508[    1.503052] usbcore: registered new interface driver hub
509[    1.508610] usbcore: registered new device driver usb
510[    1.514173] soc:usb_nop_phy supply vcc not found, using dummy regulator
511[    1.519129] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
512[    1.525395] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
513[    1.539003] input: qpnp_pon as /devices/virtual/input/input0
514[    1.554064] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: No PON config. specified
515[    1.559489] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
516[    1.568959] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
517[    1.583778] media: Linux media interface: v0.10
518[    1.596446] Linux video capture interface: v2.00
519[    1.601516] cpufreq: driver msm up and running
520[    1.606039] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
521[    1.610032] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
522[    1.618618] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
523[    1.627496] ION heap system created
524[    1.635830] ION heap adsp created at 0x00000000ff400000 with size 800000
525[    1.639225] ION heap qsecom created at 0x00000000f8400000 with size 1400000
526[    1.646177] ION heap secure_display created at 0x00000000f9800000 with size 5c00000
527[    1.652860] ION heap secure_heap created
528[    1.660758] PMIC@SID0: PM660 v1.1 options: 0, 0, 0, 0
529[    1.664737] PMIC@SID2: PM660L v2.0.1 options: 0, 0, 0, 0
530[    1.670000] IPA smmu_info.s1_bypass=1 smmu_info.fast_map=0
531[    1.677005] gdsc_vfe0: supplied by gdsc_camss_top
532[    1.680387] gdsc_vfe1: supplied by gdsc_camss_top
533[    1.685328] gdsc_cpp: supplied by gdsc_camss_top
534[    1.690170] gdsc_gpu_gx: supplied by gfx_corner
535[    1.695388] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
536[    1.698680] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
537[    1.704356] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
538[    1.711891] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
539[    1.719260] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
540[    1.727165] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=0 clocks successfully
541[    1.734384] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
542[    1.742264] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
543[    1.747718] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
544[    1.755294] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
545[    1.762670] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
546[    1.770502] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=1 clocks successfully
547[    1.777785] mdss_pll_probe: MDSS pll label = MDSS DP PLL
548[    1.795758] arm-smmu 16c0000.arm,smmu-anoc2: found 29 context interrupt(s) but have 21 context banks. assuming 21 context interrupts.
549[    1.796487] arm-smmu 5100000.arm,smmu-lpass_q6: found 17 context interrupt(s) but have 13 context banks. assuming 13 context interrupts.
550[    1.807752] arm-smmu cd00000.arm,smmu-mmss: found 24 context interrupt(s) but have 17 context banks. assuming 17 context interrupts.
551[    1.819276] arm-smmu 5040000.arm,smmu-kgsl: regulator defer delay 80
552[    1.831165] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
553[    1.837885] arm-smmu 5180000.arm,smmu-turing_q6: found 17 context interrupt(s) but have 13 context banks. assuming 13 context interrupts.
554[    1.850373] iommu: Adding device 18800000.qcom,icnss to group 0
555[    1.861421] iommu: Adding device soc:iommu_test_device to group 1
556[    1.866903] iommu: Adding device soc:usb_audio_qmi_dev to group 2
557[    1.873392] iommu: Adding device soc:qcom,msm-audio-ion to group 3
558[    1.879404] iommu: Adding device 14780000.qcom,ipa:ipa_smmu_ap to group 4
559[    1.885415] iommu: Adding device 14780000.qcom,ipa:ipa_smmu_uc to group 5
560[    1.892519] Advanced Linux Sound Architecture Driver Initialized.
561[    1.899122] Bluetooth: fffffff1b9673cf8
562[    1.905002] NET: Registered protocol family 31
563[    1.908802] Bluetooth: fffffff1b9673cf8
564[    1.913276] Bluetooth: fffffff1b9673cd8Bluetooth: fffffff1b9673cb8
565[    1.920699] Bluetooth: fffffff1b9673cb8[    1.923329] cfg80211: World regulatory domain updated:
566[    1.926860] cfg80211:  DFS Master region: unset
567[    1.931905] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
568[    1.936507] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
569[    1.946059] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
570[    1.953871] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
571[    1.961857] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
572[    1.969838] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
573[    1.977829] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
574[    1.985816] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
575[    1.993800] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
576[    2.001793] NetLabel: Initializing
577[    2.010104] NetLabel:  domain hash size = 128
578[    2.013323] NetLabel:  protocols = UNLABELED CIPSOv4
579[    2.017764] NetLabel:  unlabeled traffic allowed by default
580[    2.022820] pcie:pcie_init.
581[    2.029366] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5400mV ncp_voltage=5400mV bst_voltage=5500mV
582[    2.033245] ipa ipa2_uc_state_check:296 uC interface not initialized
583[    2.044420] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
584[    2.050737] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
585[    2.058382] sps:BAM 0x0000000014784000 is registered.
586[    2.063595] sps:BAM 0x0000000014784000 (va:0xffffff80087c0000) enabled: ver:0x27, number of pipes:20
587[    2.075878] IPA driver initialization was successful.
588[    2.078005] clocksource: Switched to clocksource arch_sys_counter
589[    2.103261] pnp: PnP ACPI: disabled
590[    2.108097] gcc-debug-sdm660 62000.qcom,cc-debug: Registered debug mux successfully
591[    2.108817] NET: Registered protocol family 2
592[    2.115174] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
593[    2.119237] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
594[    2.126673] TCP: Hash tables configured (established 32768 bind 32768)
595[    2.132863] UDP hash table entries: 2048 (order: 4, 65536 bytes)
596[    2.139337] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
597[    2.145688] NET: Registered protocol family 1
598[    2.156759] audit: initializing netlink subsys (disabled)
599[    2.156846] audit: type=2000 audit(2.139:1): initialized
600[    2.161660] Initialise system trusted keyring
601[    2.167027] vmscan: error setting kswapd cpu affinity mask
602[    2.173244] VFS: Disk quotas dquot_6.6.0
603[    2.176583] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
604[    2.181290] Registering sdcardfs 0.1
605[    2.187436] fuse init (API version 7.23)
606[    2.191342] pfk_ecryptfs [pfk_ecryptfs_init]: PFK ecryptfs inited successfully
607[    2.194943] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
608[    2.202143] pfk [pfk_init]: Driver initialized successfully
609[    2.211881] Key type asymmetric registered
610[    2.213600] Asymmetric key parser 'x509' registered
611[    2.217818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
612[    2.222566] io scheduler noop registered
613[    2.230179] io scheduler deadline registered
614[    2.234164] io scheduler cfq registered (default)
615[    2.242983] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
616[    2.243024] mdss_mdp_probe+0x268/0x13b0->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
617[    2.249790] mdss_mdp_irq_clk_setup: unable to get core gdsc regulator
618[    2.260328] No change in context(0==0), skip
619[    2.266657] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
620[    2.270207] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
621[    2.278319] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:0 ndx:0x40 prio:2
622[    2.286535] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:1 ndx:0x40 prio:2
623[    2.294780] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:0 ndx:0x80 prio:3
624[    2.303255] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:1 ndx:0x80 prio:3
625[    2.311449] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:0 ndx:0x1000 prio:4
626[    2.319778] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:1 ndx:0x1000 prio:4
627[    2.328467] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:2 num:10 rect:0 ndx:0x400 prio:0
628[    2.337060] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
629[    2.345706] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
630[    2.354505] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
631[    2.363859] xlog_status: enable:1, panic:1, dump:2
632[    2.373212] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 6
633[    2.377891] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 7
634[    2.386035] mdss_mdp_probe: mdss version = 0x30020000, bootloader display is on, num 1, intf_sel=0x00000100
635[    2.395128] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
636[    2.403648] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
637[    2.413603] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
638[    2.419330] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_hx83112a_djn_fhd_video:config0:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_hx83112a_djn_fhd_video
639[    2.425086] mdss_dsi_panel_init: Panel Name = DJN hx83112a 1080p video mode dsi panel
640[    2.439798] mdss_dsi_parse_split_link_settings: enable 0 sublinks-count 0 lanes per sublink 0
641[    2.447576] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_hx83112a_djn_fhd_video" (fffffff1b9673298)
642[    2.456078] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
643[    2.466655] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
644[    2.474464] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:config0
645[    2.482243] mdss_dsi_parse_panel_features: ulps feature disabled
646[    2.489212] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
647[    2.495385] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
648[    2.502726] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
649[    2.509352] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
650[    2.516051] dyn_fps: min = 48, max = 60
651[    2.523013] mdss_dsi_parse_ctrl_params:4249 Unable to read qcom,display-id, data=0000000000000000,len=20
652[    2.526573] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
653[    2.536271] mdss_dsi_parse_gpio_params: avdd_en gpio not specified
654[    2.542336] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
655[    2.548424] mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
656[    2.555296] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800867e000 ctrl_size=400 phy_base=ffffff80086a2400 phy_size=588
657[    2.567109] dsi_panel_device_register: Continuous splash enabled
658[    2.578559] Unable to find fb node for device: c994000.qcom,mdss_dsi_ctrl0
659[    2.584706] mdss_register_panel: adding framebuffer device c994000.qcom,mdss_dsi_ctrl0
660[    2.592105] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x20010000, PHY rev:0x2
661[    2.599544] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
662[    2.607848] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_hx83112a_djn_fhd_video:config0:1:none:cfg:single_dsi panel_name:none
663[    2.613463] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_hx83112a_djn_fhd_video:config0:1:none:cfg:single_dsi
664[    2.625431] mdss_dsi_ctrl_probe: panel configuration failed
665[    2.636710] mdss_dsi_ctrl: probe of c996000.qcom,mdss_dsi_ctrl1 failed with error -22
666[    2.642186] mdss_dsi_status_init: DSI status check interval:5000
667[    2.650899] mdss_dp_usbpd_setup: get_usbpd phandle failed (-11)
668[    2.656136] mdss_dp_probe: Error usbpd setup!
669[    2.662873] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
670[    2.666871] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
671[    2.674106] mdss_fb_register: FrameBuffer[0] 1080x2160 registered successfully!
672[    2.679714] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
673[    2.686498] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
674[    2.692145] mdss_mdp_splash_parse_dt: splash mem child node is not present
675[    2.703988] spcom [spcom_init]: spcom driver version 1.1 17-July-2017.
676[    2.706398] audio_notifer_reg_service: service SSR_MODEM is in use
677[    2.718414] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
678[    2.718959] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
679[    2.743324] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
680[    2.743470] In memshare_probe, Memshare probe success
681[    2.753397] subsys-pil-tz cce0000.qcom,venus: for venus segments only will be dumped.
682[    2.757583] subsys-pil-tz soc:qcom,kgsl-hyp: for a512_zap segments only will be dumped.
683[    2.766258] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
684[    2.776040] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
685[    2.778406] icnss: Platform driver probed successfully
686[    2.786974] qbt1000:qbt1000_read_device_tree: ipc gpio not found, error=-2
687[    2.791061] qbt1000: probe of soc:qcom,qbt1000 failed with error -2
688[    2.799739] msm_rpm_log_probe: OK
689[    2.805207] msm_serial c170000.serial: msm_serial: detected port #0
690[    2.807559] msm_serial c170000.serial: uartclk = 1843200
691[    2.813693] c170000.serial: ttyMSM0 at MMIO 0xc170000 (irq = 49, base_baud = 115200) [    2.827732] console [ttyMSM0] enabled
692[    2.827732] console [ttyMSM0] enabled
693[    2.830359] bootconsole [uart0] disabled
694[    2.830359] bootconsole [uart0] disabled
695[    2.838373] msm_serial: driver initialized
696[    2.842632] uart_tx_gpio is not available
697[    2.845810] uart_rx_gpio is not available
698[    2.849890] uart_cts_gpio is not available
699[    2.853897] uart_rfr_gpio is not available
700[    2.858378] sps: BAM device 0x000000000c184000 is not registered yet.
701[    2.862135] sps:BAM 0x000000000c184000 is registered.
702[    2.869685] c1af000.uart: ttyHS0 at MMIO 0xc1af000 (irq = 317, base_baud = 460800) is a MSM HS UART
703[    2.874445] msm_serial_hs module loaded
704[    2.883908] random: nonblocking pool is initialized
705[    2.895018] i2c_devinfo i2c_devinfo_init sucessfully
706[    2.897958] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 8
707[    2.899359] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 9
708[    2.913327] brd: module loaded
709[    2.913895] zram: Added device: zram0
710[    2.917172] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
711[    2.920259] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
712[    2.926697] QSEECOM: qseecom_probe: no-clock-support=0x1[    2.933443] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
713[    2.938645] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
714[    2.950916] qce 1de0000.qcedev: Qualcomm Crypto 5.3.4 device found @0x1de0000
715[    2.951236] qce 1de0000.qcedev: CE device = 0x0
716[    2.951236] IO base, CE = 0xffffff8008ec0000
717[    2.951236] Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
718[    2.951236] IO base BAM = 0x0000000000000000
719[    2.951236] BAM IRQ 93
720[    2.951236] Engines Availability = 0x2011053
721[    2.961476] sps:BAM 0x0000000001dc4000 is registered.
722[    2.983722] sps:BAM 0x0000000001dc4000 (va:0xffffff8009c40000) enabled: ver:0x27, number of pipes:16
723[    2.988687] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 93
724[    3.001050] i2c-msm-v2 c1b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0xa (ok)
725[    3.005101] qcrypto 1de0000.qcrypto: Qualcomm Crypto 5.3.4 device found @0x1de0000
726[    3.012977] qcrypto 1de0000.qcrypto: CE device = 0x0
727[    3.012977] IO base, CE = 0xffffff8009d00000
728[    3.012977] Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
729[    3.012977] IO base BAM = 0x0000000000000000
730[    3.012977] BAM IRQ 93
731[    3.012977] Engines Availability = 0x2011053
732[    3.024207] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 93
733[    3.041054] nq-nci 6-0028: nfcc_hw_check: - nq - reset cmd answer : NfcNciRx 40 0 3
734[    3.059358] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
735[    3.061231] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
736[    3.066425] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
737[    3.071391] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
738[    3.076322] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
739[    3.081285] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
740[    3.081554] nq-nci 6-0028: nfcc_hw_check: - NFCC HW not Supported
741[    3.081593] i2c_devinfo write NFC:1;
742[    3.081596] nq-nci 6-0028: nqx_probe: probing NFCC NQxxx exited successfully
743[    3.101055] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
744[    3.107920] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
745[    3.112877] qcrypto 1de0000.qcrypto: qcrypto-sha1
746[    3.117899] qcrypto 1de0000.qcrypto: qcrypto-sha256
747[    3.122534] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
748[    3.127192] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
749[    3.133455] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
750[    3.139696] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
751[    3.146305] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
752[    3.152658] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
753[    3.159055] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
754[    3.165478] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
755[    3.170598] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
756[    3.176078] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
757[    3.182279] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
758[    3.187117] SCSI Media Changer driver v0.25 
759[    3.195255] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
760[    3.199937] tun: Universal TUN/TAP device driver, 1.6
761[    3.205625] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
762[    3.210465] sky2: driver version 1.30
763[    3.216887] PPP generic driver version 2.4.2
764[    3.220273] PPP BSD Compression module registered
765[    3.224586] PPP Deflate Compression module registered
766[    3.229185] PPP MPPE Compression module registered
767[    3.234222] NET: Registered protocol family 24
768[    3.238984] CLD80211: Initializing
769[    3.243388] usbcore: registered new interface driver asix
770[    3.246756] usbcore: registered new interface driver ax88179_178a
771[    3.252205] usbcore: registered new interface driver cdc_ether
772[    3.258268] usbcore: registered new interface driver net1080
773[    3.264003] usbcore: registered new interface driver cdc_subset
774[    3.269810] usbcore: registered new interface driver zaurus
775[    3.275489] usbcore: registered new interface driver cdc_ncm
776[    3.281461] msm_sharedmem: sharedmem_register_qmi: qmi init successful
777[    3.288949] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
778[    3.297889] msm-dwc3 a800000.ssusb: unable to get dbm device
779[    3.302301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
780[    3.306525] ehci-pci: EHCI PCI platform driver
781[    3.312891] ehci-platform: EHCI generic platform driver
782[    3.317619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
783[    3.322450] ohci-pci: OHCI PCI platform driver
784[    3.328670] ohci-platform: OHCI generic platform driver
785[    3.333763] usbcore: registered new interface driver usb-storage
786[    3.338220] usbcore: registered new interface driver usb_ehset_test
787[    3.346007] qpnp-pdphy 800f000.qcom,spmi:qcom,pm660@0:qcom,usb-pdphy@1700: usbpd_create failed: -517
788[    3.351141] ptn36502 2-001a: ptn36502_probe: ------- ptn36502_probe start------
789[    3.351184] mousedev: PS/2 mouse device common for all mice
790[    3.351281] Andy enter holitechget_lcd_panel_id,lcd_panel_num = 0
791[    3.351282] [HXTP] Himax common touch panel driver init
792[    3.351305] [HXTP] himax_common_init_async:Enter 
793[    3.351331] stmvl53l0_init: Enter
794[    3.351334] stmvl53l0_init_cci: Enter
795[    3.351459] [HXTP]  DT-himax_parse_dt:panel-coords = 0, 1080, 0, 2160
796[    3.351538] [HXTP]  DT-himax_parse_dt:display-coords = (1080, 2160)[HXTP]  DT:gpio_3v3_en value is not valid
797[    3.351640] [HXTP]  DT:gpio_irq=67, gpio_rst=66, gpio_3v3_en=-2[HXTP]  DT:protocol_type=1[HXTP]  DT-No vk info in DT
798[    3.351641] 1-0048 supply vdd not found, using dummy regulator
799[    3.351708] 1-0048 supply avdd not found, using dummy regulator
800[    3.351853] stmvl53l0_init_cci: End
801[    3.351854] stmvl53l0_init: End
802[    3.351858] andy fpc1020_probe failed as fpsensor=2(1=fp)
803[    3.351861] [Goodix] Begin goodix fingerprint init!
804[    3.352122] [Goodix] Begin goodix fingerprint probe!
805[    3.362250] gf::irq_gpio:72
806[    3.363351] input: qwerty as /devices/virtual/input/input1
807[    3.422521] gf3258DN1 Create proc entry success!
808[    3.422521] gf_spi: version V1.2.01
809[    3.422522] [Goodix] Probe goodix fingerprint success!
810[    3.422586] gf_spi: status = 0x0
811[    3.423479] enter hall_probe
812[    3.423508] hall irq_gpio=70
813[    3.423578] input: hall-switch-input as /devices/virtual/input/input2
814[    3.423883] hall_probe: gpios = 1, gpion=1
815[    3.423885] hall irq = 270
816[    3.424041] hall_probe end
817[    3.424468] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm660@0:qcom,pm660_rtc: rtc core: registered qpnp_rtc as rtc0
818[    3.424966] i2c /dev entries driver
819[    3.425562] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 10
820[    3.425811] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [0] = 3072
821[    3.425811] ,
822[    3.425814] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [1] = 3073
823[    3.425814] ,
824[    3.425815] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [2] = 3074
825[    3.425815] ,
826[    3.425919] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [3] = 3075
827[    3.425919] ,
828[    3.425919] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 11
829[    3.426090] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :cpp sid [0] = 2560
830[    3.426090] ,
831[    3.426091] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 12
832[    3.426230] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_enc0 sid [0] = 2048
833[    3.426230] ,
834[    3.426230] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 13
835[    3.429237] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_dma sid [0] = 2049
836[    3.429237] ,
837[    3.429237] stmvl53l0_platform_probe: Enter
838[    3.429240] stmvl53l0_get_dt_data: Enter
839[    3.429242] stmvl53l0_get_dt_data: cell-index: 0
840[    3.429243] stmvl53l0_get_dt_data: cci_master: 0
841[    3.429304] stmvl53l0_get_dt_data: vreg-name: cam_laser min_volt: 3600000 max_volt: 3600000
842[    3.429304] stmvl53l0_get_dt_data: End rc =0
843[    3.429325] stmvl53l0_setup: Enter
844[    3.429335] stmvl53l0_setup: register_irq:245
845[    3.429483] stmvl53l0_setup: interrupt is hooked
846[    3.429551] input: STM VL53L0 proximity sensor as /devices/virtual/input/input3
847[    3.429603] stmvl53l0_setup: Misc device registration name:ca0c000.qcom,cci:qcom,tof@29
848[    3.429631] stmvl53l0_setup: support ver. 1.0.5 enabled
849[    3.429632] stmvl53l0_setup: End
850[    3.429633] stmvl53l0_platform_probe: End
851[    3.440552] msm_actuator_platform_probe:1970 msm_actuator_platform_probe: No/Error Actuator GPIOs
852[    3.440592] msm_actuator_platform_probe:1970 msm_actuator_platform_probe: No/Error Actuator GPIOs
853[    3.440632] msm_actuator_platform_probe:1970 msm_actuator_platform_probe: No/Error Actuator GPIOs
854[    3.441492] msm_eeprom_platform_probe failed 1829
855[    3.441950] msm_eeprom_platform_probe failed 1829
856[    3.442359] msm_eeprom_platform_probe failed 1829
857[    3.443340] msm_camera_request_gpio_table:771 gpio 1018:CAM_VDIG2 request fails
858[    3.443342] msm_camera_request_gpio_table:771 gpio 51:CAM_VANA2 request fails
859[    3.477479] msm_cci_init:1445: hw_version = 0x10060000
860[    3.491014] i2c-msm-v2 c175000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
861[    3.491903] [HXTP] himax_ic_package_check:Read driver IC ID = 83,11,2A
862[    3.491908] [HXTP] himax_ic_package_check: andy lcd_panel_id = 0
863[    3.491909] [HXTP] Himax IC package 83112_in
864[    3.491911] i2c_devinfo write TP:1;
865[    3.495060] [HXTP] data[3]:0,data[2]:0,data[1]:114,data[0]:192
866[    3.495061] [HXTP] reload OK! 
867[    3.495065] [HXTP] himax_read_FW_ver : data[0]=0xC0,data[1]=0x72,data[2]=0x00,data[3]=0x00
868[    3.495066] [HXTP] reload_status=1
869[    3.531965] [HXTP] himax_sense_off: Check enter_save_mode data[0]=C 
870[    3.571961] [HXTP] PANEL_VER : F 
871[    3.571963] [HXTP] FW_VER : 203 
872[    3.572844] [HXTP] TOUCH_VER : 7 
873[    3.572846] [HXTP] DISPLAY_VER : 5 
874[    3.573696] [HXTP] CID_VER : FF2C 
875[    3.628524] [HXTP] himax_hw_check_CRC: tmp_data[3]=0, tmp_data[2]=0, tmp_data[1]=0, tmp_data[0]=0  
876[    3.630799] s5k4h7yx_ofilm_off0812_get_otp_vendor_module_id mid=0x10, flag=0x55
877[    3.630801] get_otp_vendor_module_id eeprom_name=s5k4h7yx_ofilm_off0812, module_id=0
878[    3.690805] [HXTP] himax_loadSensorConfig: initialization complete
879[    3.690806] [HXTP] himax_power_on_init:
880[    3.690810] [HXTP] himax_touch_information:HX_RX_NUM =36,HX_TX_NUM =18,HX_MAX_PT=10 
881[    3.690813] [HXTP] himax_touch_information:HX_XY_REVERSE =0,HX_Y_RES =2160,HX_X_RES=1080 
882[    3.690814] [HXTP] himax_touch_information:HX_INT_IS_EDGE =1 
883[    3.695309] [HXTP] Enter himax_sense_on  
884[    3.696179] [HXTP] himax_ic_reset,status: loadconfig=0,int_off=0
885[    3.696182] [HXTP] himax_pin_reset: Now reset the Touch chip.
886[    3.699375] msm_cci_init:1445: hw_version = 0x10060000
887[    3.770816] [HXTP] calcDataSize: coord_data_size: 40, area_data_size:12, raw_data_frame_size:67, raw_data_nframes:1[HXTP] himax_chip_common_probe: calcDataSize complete
888[    3.770819] [HXTP] himax_chip_common_probe: Use Protocol Type B
889[    3.770821] [HXTP] himax_input_register: andy get lcd_panel_id = 0
890[    3.770837] [HXTP] input_set_abs_params: mix_x 0, max_x 1080, min_y 0, max_y 2160
891[    3.770968] input: himax-touchscreen as /devices/virtual/input/input4
892[    3.771194] [HXTP] himax_report_data_init: rawdata_frame_size = 11 [HXTP] himax_report_data_init: ic_data->HX_MAX_PT:10,hx_raw_cnt_max:2,hx_raw_cnt_rmd:2,g_hx_rawdata_size:67,hx_touch_data->touch_info_size:56
893[    3.771383] [HXTP] himax_int_register_trigger edge triiger falling
894[    3.771383]  [HXTP] himax_ts_register_interrupt: irq enabled at qpio: 267
895[    3.810798] [HXTP] lct_tp_info: initialized tp_info:203,0705
896[    3.810798] s5k4h7yx_holitech_elq8909m_get_otp_vendor_module_id mid=0x10, flag=0x55
897[    3.810801] get_otp_vendor_module_id eeprom_name=s5k4h7yx_holitech_elq8909m, module_id=16
898[    3.879571] msm_cci_init:1445: hw_version = 0x10060000
899[    3.879752] msm_cci_irq:1803 MASTER_0 error 0x10000000
900[    3.879789] msm_cci_i2c_read:960 read_words = 0, exp words = 4
901[    3.879792] msm_cci_i2c_read_bytes:1043 failed rc -22
902[    3.879803] read_eeprom_memory: read failed
903[    3.879805] msm_eeprom_platform_probe read_eeprom_memory failed
904[    3.913316] qcom,eeprom: probe of ca0c000.qcom,cci:qcom,eeprom@5 failed with error -22
905[    3.948240] msm_cci_init:1445: hw_version = 0x10060000
906[    3.948419] msm_cci_irq:1809 MASTER_1 error 0x40000000
907[    3.948457] msm_cci_i2c_read:960 read_words = 0, exp words = 4
908[    3.948459] msm_cci_i2c_read_bytes:1043 failed rc -22
909[    3.948466] read_eeprom_memory: read failed
910[    3.948467] msm_eeprom_platform_probe read_eeprom_memory failed
911[    3.981943] qcom,eeprom: probe of ca0c000.qcom,cci:qcom,eeprom@6 failed with error -22
912[    3.984632] qcom,camera-flash soc:qcom,camera-flash@1: Led torch-light0 renamed to torch-light0_1 due to name collision
913[    3.993915] MSM-CPP cpp_init_hardware:1134 CPP HW Version: 0x60010002
914[    3.993923] MSM-CPP cpp_init_hardware:1152 stream_cnt:0
915[    3.994112] MSM-CPP cpp_release_hardware:1215 cpp hw release done
916[    3.994987] CAM-SOC msm_camera_get_reg_base:864 err: mem resource vfe_fuse not found
917[    3.994989] CAM-SOC msm_camera_get_res_size:907 err: mem resource vfe_fuse not found
918[    3.996413] CAM-SOC msm_camera_get_reg_base:864 err: mem resource vfe_fuse not found
919[    3.996415] CAM-SOC msm_camera_get_res_size:907 err: mem resource vfe_fuse not found
920[    4.009190] __msm_jpeg_init:1537] Jpeg Device id 0
921[    4.009191] iommu: Adding device cc00000.qcom,vidc:non_secure_cb to group 14
922[    4.011615] iommu: Adding device cc00000.qcom,vidc:firmware_cb to group 15
923[    4.011745] iommu: Adding device cc00000.qcom,vidc:secure_bitstream_cb to group 16
924[    4.013442] iommu: Adding device cc00000.qcom,vidc:secure_pixel_cb to group 17
925[    4.014459] iommu: Adding device cc00000.qcom,vidc:secure_non_pixel_cb to group 18
926[    4.017313] sde_smmu_callback: <SDEROT_INFO> sde_smmu_callback registered domain: 1
927[    4.017315] sde_smmu_callback: <SDEROT_INFO> sde_smmu_callback registered domain: 0
928[    4.017826] No change in context(0==0), skip
929[    4.018656] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
930[    4.018681] sde_rotator c900000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
931[    4.019298] usbcore: registered new interface driver uvcvideo
932[    4.019299] USB Video Class driver (1.1.1)
933[    4.209686] gpio56 default value is 0
934[    4.213653] gpio56 set to output hight
935[    4.227365] gpio56  value is 1
936[    4.227508] i2c-msm-v2 c176000.i2c: msm_bus_scale_register_client(mstr-id:86):0x16 (ok)
937[    4.229477] i2c-msm-v2 c176000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:1) mode:FIFO slv_addr:0x1a MSTR_STS:0x0d1300c8 OPER:0x00000090
938[    4.237294] ptn36502 2-001a: ptn36502_i2c_read_reg: ------- i2c_master_send reg add  fail------
939[    4.253203] i2c_devinfo write PTN36502:0;
940[    4.261603] ptn36502 2-001a: ptn36502_probe:CHIP_ID_reg read fail,please check HW.
941[    4.265790] ptn36502: probe of 2-001a failed with error -12
942[    4.273421] i2c_devinfo write parallel-charge:1;
943[    4.278701] smb1351_parallel_charger_probe: smb1351 parallel successfully probed.
944[    4.283642] smb1351_is_usb_present: USB psy not found
945[    4.293185] thermal thermal_zone0: failed to read out thermal zone (-19)
946[    4.296235] smblib_handle_typec_insertion val.intval = 1 
947[    4.302808] smblib_handle_typec_insertion is_ptn36502_safe_mode = 0 
948[    4.313761] gpio45 default value is 0
949[    4.314461] gpio45 set to output low
950[    4.318019] QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 3
951[    4.323563] qpnp_vadc_read: Error reading vadc_hc channel 78
952[    4.330813] thermal thermal_zone1: failed to read out thermal zone (-517)
953[    4.336651] qpnp_vadc_read: Error reading vadc_hc channel 79
954[    4.343215] thermal thermal_zone2: failed to read out thermal zone (-517)
955[    4.367254] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
956[    4.368022] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
957[    4.374109] md: linear personality registered for level -1
958[    4.381456] device-mapper: uevent: version 1.0.3
959[    4.387015] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
960[    4.391817] device-mapper: req-crypt: dm-req-crypt successfully initalized.
961[    4.391817] 
962[    4.400754] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
963[    4.408759] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree
964[    4.415928] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree
965[    4.423823] sdhci: Secure Digital Host Controller Interface driver
966[    4.430753] sdhci: Copyright(c) Pierre Ossman
967[    4.436923] sdhci-pltfm: SDHCI platform and OF driver helper
968[    4.442429] qcom_ice_get_pdevice: found ice device fffffff1b6c0cc00
969[    4.445732] usbcore: registered new interface driver usbhid
970[    4.445734] usbhid: USB HID core driver
971[    4.445798] ashmem: initialized
972[    4.446174] qpnp_coincell_charger_show_state: enabled=N, voltage=2500 mV, resistance=2100 ohm
973[    4.465576] qcom_ice_get_pdevice: matching platform device fffffff1350c2000
974[    4.476651] qcom_ice c0c8000.sdcc1ice: QC ICE 3.0.72 device found @0xffffff8008d50000
975[    4.481515] sdhci_msm c0c4000.sdhci: No vmmc regulator found
976[    4.488999] sdhci_msm c0c4000.sdhci: No vqmmc regulator found
977[    4.495089] mmc0: SDHCI controller on c0c4000.sdhci [c0c4000.sdhci] using 64-bit ADMA in CMDQ mode
978[    4.566148] mmc0: Out-of-interrupt timeout is 100[ms]
979[    4.566183] mmc0: eMMC FW version: 0x05
980[    4.570174] mmc0: CMDQ supported: depth: 16
981[    4.573839] mmc0: cache barrier support 0 flush policy 0
982[    4.583917] cmdq_host_alloc_tdl: desc_size: 1024 data_sz: 63488 slot-sz: 32
983[    4.584075] desc-base: 0xffffff8008dde000 trans-base: 0xffffff8008de0000
984[    4.584075]  desc_dma 0xf5853000 trans_dma: 0xf6a10000
985[    4.590257] mmc0: CMDQ enabled on card
986[    4.602160] mmc0: new HS400 MMC card at address 0001
987[    4.606271] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 (0xfffffff134487200)
988[    4.610999] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1 (0xfffffff134487208)
989[    4.620189] mmcblk0: mmc0:0001 DH6DMB 58.2 GiB 
990[    4.630067] mmcblk0rpmb: mmc0:0001 DH6DMB partition 3 4.00 MiB
991[    4.635956]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p54
992[    4.644675] sdhci_msm c084000.sdhci: sdhci_msm_probe: ICE device is not enabled
993[    4.677461] sdhci_msm c084000.sdhci: No vmmc regulator found
994[    4.677486] sdhci_msm c084000.sdhci: No vqmmc regulator found
995[    4.682541] mmc1: SDHCI controller on c084000.sdhci [c084000.sdhci] using 64-bit ADMA in legacy mode
996[    4.717354] bimc-bwmon 1008000.qcom,cpu-bwmon: BW HWmon governor registered.
997[    4.718477] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
998[    4.723522] arm-memlat-mon soc:qcom,arm-memlat-mon-4: Memory Latency governor registered.
999[    4.733822] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1000[    4.739762] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1001[    4.747585] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1002[    4.755740] devfreq soc:qcom,memlat-cpu4: Couldn't update frequency transition information.
1003[    4.765910] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
1004[    4.772715] usbcore: registered new interface driver snd-usb-audio
1005[    4.782908] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1006[    4.786496] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1007[    4.802791] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
1008[    4.802990] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
1009[    4.814221] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1010[    4.831415] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
1011[    4.844110] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
1012[    4.855704] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1013[    4.872896] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
1014[    4.885577] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
1015[    4.897195] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1016[    4.914408] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
1017[    4.927064] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
1018[    4.938688] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1019[    4.955882] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1020[    4.968558] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1021[    4.980185] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1022[    4.997897] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1023[    5.010921] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1024[    5.022394] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1025[    5.040076] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1026[    5.053114] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1027[    5.064558] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1028[    5.082273] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1029[    5.095289] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1030[    5.106744] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1031[    5.129268] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1032[    5.143181] GACT probability NOT on
1033[    5.144724] Mirror/redirect action on
1034[    5.148117] u32 classifier
1035[    5.151935]     Actions configured
1036[    5.154545] Netfilter messages via NETLINK v0.30.
1037[    5.157944] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1038[    5.162884] ctnetlink v0.93: registering with nfnetlink.
1039[    5.169027] xt_time: kernel timezone is -0000
1040[    5.174276] ip_tables: (C) 2000-2006 Netfilter Core Team
1041[    5.178467] arp_tables: (C) 2002 David S. Miller
1042[    5.183825] Initializing XFRM netlink socket
1043[    5.188522] NET: Registered protocol family 10
1044[    5.193147] mip6: Mobile IPv6
1045[    5.196892] ip6_tables: (C) 2000-2006 Netfilter Core Team
1046[    5.199997] sit: IPv6 over IPv4 tunneling driver
1047[    5.205598] NET: Registered protocol family 17
1048[    5.210016] NET: Registered protocol family 15
1049[    5.214291] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1050[    5.218703] Ebtables v2.0 registered
1051[    5.231514] l2tp_core: L2TP core driver, V2.0
1052[    5.235003] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1053[    5.239254] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1054[    5.243967] l2tp_netlink: L2TP netlink interface
1055[    5.249423] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1056[    5.254303] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1057[    5.260401] NET: Registered protocol family 27
1058[    5.271597] mdss_dp_usbpd_setup: get_usbpd phandle failed (-517)
1059[    5.271621] mdss_dp_probe: Error usbpd setup!
1060[    5.277787] subsys-pil-tz 15700000.qcom,lpass: for adsp segments only will be dumped.
1061[    5.281865] subsys-pil-tz 1a300000.qcom,turing: for cdsp segments only will be dumped.
1062[    5.289517] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
1063[    5.297264] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region@94800000
1064[    5.302716] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1065[    5.312128] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
1066[    5.321704] sps:BAM 0x000000000a904000 is registered.
1067[    5.327914] Invalid index Defaulting curr to 0[    5.340078] thermal thermal_zone24: failed to read out thermal zone (-19)
1068[    5.342134] FG: fg_gen3_probe: battery SOC:72 voltage: 3981923uV temp: 390 id: 0KOhms
1069[    5.346018] FG: fg_psy_get_property: unsupported property 4
1070[    5.353807] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1071[    5.355434] FG: fg_get_time_to_full_locked: battery profile is not loaded
1072[    5.368888] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1073[    5.375830] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1074[    5.390063] mdss_dp_parse_gpio_params: 951,hpd gpio not specified
1075[    5.390263] mdss_register_panel: adding framebuffer device c990000.qcom,dp_ctrl
1076[    5.396272] mdss_dp_device_register: dp initialized
1077[    5.403134] hdmi_edid_config_override: invalid input
1078[    5.410110] sps:BAM 0x000000000a904000 is registered.
1079[    5.413518] msm-dwc3 a800000.ssusb: charger detection in progress
1080[    5.418287] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1081[    5.424364] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1082[    5.434059] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1083[    5.446388] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
1084[    5.448154] mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
1085[    5.454103] mdss_mdp_splash_parse_dt: splash mem child node is not present
1086[    5.461104] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1087[    5.467893] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1088[    5.477722] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1089[    5.490416] Registered cp15_barrier emulation handler
1090[    5.491781] Registered setend emulation handler
1091[    5.496918] core_ctl: Creating CPU group 0
1092[    5.501258] core_ctl: Init CPU0 state
1093[    5.505376] core_ctl: Init CPU1 state
1094[    5.509107] core_ctl: Init CPU2 state
1095[    5.512886] core_ctl: Init CPU3 state
1096[    5.516494] core_ctl: Creating CPU group 4
1097[    5.520047] core_ctl: Init CPU4 state
1098[    5.524049] core_ctl: Init CPU5 state
1099[    5.527770] core_ctl: Init CPU6 state
1100[    5.531424] core_ctl: Init CPU7 state
1101[    5.535280] registered taskstats version 1
1102[    5.538732] Loading compiled-in X.509 certificates
1103[    5.544084] Loaded X.509 cert 'Build time autogenerated kernel key: 6ddd0374270b15cc53047f54a6ddcfa1be016d9d'
1104[    5.547878] Loaded X.509 cert 'Android: 8b67dec64efd624f2ec9d8497dbd3c139cadb788'
1105[    5.558729] Key type encrypted registered
1106[    5.566290] msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
1107[    5.569026] spss_utils [spss_init]: spss-utils driver Ver 1.2 13-Jan-2017.
1108[    5.577444] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1109[    5.583049] ADSPRPC: gcinfo[0].heap_vmid 33
1110[    5.591069] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 19
1111[    5.595871] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 20
1112[    5.604597] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 21
1113[    5.613182] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 22
1114[    5.621775] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 23
1115[    5.630946] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 24
1116[    5.638847] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 25
1117[    5.647304] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 26
1118[    5.655822] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 27
1119[    5.661108] PMI: smblib_update_usb_type: Is not float charging
1120[    5.661450] usbpd usbpd0: Type-C Source (default) connected
1121[    5.667115] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
1122[    5.684394] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 28
1123[    5.690558] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 29
1124[    5.699218] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 30
1125[    5.707898] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13 to group 31
1126[    5.711357] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
1127[    5.711362] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
1128[    5.734715] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1129[    5.741343] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1130[    5.751092] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1131[    5.760974] of_batterydata_get_best_profile: No battery data found,use default battery data
1132[    5.764935] FG: fg_get_batt_profile: couldn't find profile handle
1133[    5.775720] FG: profile_load_work: profile for batt_id=197KOhms not found..using OTP, rc:-61
1134[    5.776530] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1135[    5.776667] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1136[    5.777034] RNDIS_IPA module is loaded.
1137[    5.777034] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1138[    5.780003] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input5
1139[    5.783172] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1140[    5.783263] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1141[    5.783539] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1142[    5.787976] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm660@0:qcom,pm660_rtc: setting system clock to 1970-01-08 04:04:17 UTC (619457)
1143[    5.789681] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1144[    5.789821] msm-core initialized without polling period
1145[    5.789824] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1146[    5.790256] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1147[    5.796361] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1148[    5.796457] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1149[    5.796791] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1150[    5.802488] lmh_lite:lmh_parse_sensor Registering sensor:[GLM_soc]
1151[    5.802652] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp1-]
1152[    5.802762] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp0-]
1153[    5.802912] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1154[    5.802914] soc:qcom,lmh supply vdd-apss not found, using dummy regulator
1155[    5.802933] lmh_lite:lmh_get_sensor_devicetree Error getting ODCM thresh. err:-22
1156[    5.803019] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1157[    5.803615] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1158[    5.809668] calculate_residency: residency < 0 for LPM
1159[    5.809670] parse_cpu_levels: idx 1 172
1160[    5.809672] parse_cpu_levels: idx 2 1181
1161[    5.809673] parse_cpu_levels: idx 2 2009
1162[    5.809676] calculate_residency: residency < 0 for LPM
1163[    5.809713] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1164[    5.809773] parse_cpu_levels: idx 1 191
1165[    5.809774] parse_cpu_levels: idx 2 1109
1166[    5.809775] parse_cpu_levels: idx 2 2410
1167[    5.809777] calculate_residency: residency < 0 for LPM
1168[    5.809822] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1169[    5.810565] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1170[    5.816814] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1171[    5.816965] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1172[    5.817845] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1173[    5.823655] rmnet_ipa started initialization
1174[    5.823657] IPA SSR support = True
1175[    5.823657] IPA ipa-loaduC = True
1176[    5.823659] IPA SG support = True
1177[    5.823660] IPA Napi Enable = False
1178[    5.823662] using default for wan-rx-desc-size = 1024
1179[    5.823920] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1180[    5.824026] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1181[    5.825188] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1182[    5.825191] ipa ipa2_uc_state_check:301 uC is not loaded
1183[    5.826033] rmnet_ipa completed initialization
1184[    5.826446] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1185[    5.835288] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Adsp is not loaded yet 0
1186[    5.835456] msm_sdw_codec 152c1000.msm-sdw-codec: Adsp is not loaded yet 0
1187[    5.838773] gfx_mem_acc_corner: disabling
1188[    5.838778] apc0_pwrcl_corner: disabling
1189[    5.838779] apc1_perfcl_corner: disabling
1190[    5.838781] cam_avdd_gpio_regulator: disabling
1191[    5.838782] cam_actuator_regulator: disabling
1192[    5.838784] cam_dvdd_gpio_regulator: disabling
1193[    5.838785] cam_rear_dvdd_gpio_regulator: disabling
1194[    5.838789] gdsc_ufs: disabling
1195[    5.838802] gdsc_venus: disabling
1196[    5.838826] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1197[    5.840686] ALSA dev�[    6.181080] md: Waiting for all devices to be available before autodetect
1198[    6.181128] md: If you don't use raid, use raid=noautodetect
1199[    6.187157] md: Autodetecting RAID arrays.
1200[    6.192575] md: Scanned 0 and added 0 devices.
1201[    6.196466] md: autorun ...
1202[    6.200904] md: ... autorun DONE.
1203[    6.203585] device-mapper: init: attempting early device configuration.
1204[    6.207398] device-mapper: init: adding target '0 1 android-verity /dev/mmcblk0p15'
1205[    6.213549] device-mapper: android-verity: key:id:8b67dec64efd624f2ec9d8497dbd3c139cadb788 dev:/dev/mmcblk0p15
1206[    6.223460] device-mapper: android-verity: bio magic_number:2952900609 protocol_version:0 table_length:236
1207[    6.231250] device-mapper: android-verity: verity_table: 1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 774155 774155 sha256 fdc74442e3afd17fdc1e8646198b2ebb7cdb8d84b890d11ac96d08d00ab410c7 aee0877
1208[    6.244967] device-mapper: android-verity: Signature verification success
1209[    6.266806] device-mapper: android-verity: Data sectors 6193240
1210[    6.274169] device-mapper: android-verity: android-verity mounted as verity target
1211[    6.279512] device-mapper: init: dm-0 is ready
1212[    6.295056] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
1213[    6.307237] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1214[    6.307277] VFS: Mounted root (ext4 filesystem) readonly on device 252:0.
1215[    6.316532] Freeing unused kernel memory: 8192K (ffffff876e000000 - ffffff876e800000)
1216[    6.350259] init: init first stage started!
1217[    6.356403] init: Using Android DT directory /proc/device-tree/firmware/android/
1218[    6.391014] FG: fg_get_time_to_full_locked: battery profile is not loaded
1219[    6.539126] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1,discard
1220[    6.539203] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/c0c4000.sdhci/by-name/vendor_a,target=/vendor,type=ext4)=0: Success
1221[    6.547458] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
1222[    6.559236] init: Loading SELinux policy
1223[    6.612487] audit: type=1403 audit(619458.319:2): policy loaded auid=4294967295 ses=4294967295
1224[    6.612645] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy
1225[    6.612645] 
1226[    6.623554] selinux: SELinux: Loaded file_contexts
1227[    6.623554] 
1228[    6.630616] init: init second stage started!
1229[    6.640113] init: Using Android DT directory /proc/device-tree/firmware/android/
1230[    6.640456] init: property_set("ro.boot.selinux", "permissive") failed: property already set
1231[    6.649870] selinux: SELinux: Loaded file_contexts
1232[    6.649870] 
1233[    6.656554] selinux: SELinux: Loaded property_contexts from /system/etc/selinux/plat_property_contexts & /vendor/etc/selinux/nonplat_property_contexts.
1234[    6.656554] 
1235[    6.662138] init: Running restorecon...
1236[    6.682187] init: waitid failed: No child processes
1237[    6.682978] init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
1238[    6.686937] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
1239[    6.698161] init: Parsing file /init.rc...
1240[    6.707638] init: Added '/init.environ.rc' to import list
1241[    6.710432] init: Added '/init.usb.rc' to import list
1242[    6.715937] init: Added '/init.qcom.rc' to import list
1243[    6.720954] init: Added '/vendor/etc/init/hw/init.qcom.rc' to import list
1244[    6.725970] init: Added '/init.usb.configfs.rc' to import list
1245[    6.732839] init: Added '/init.zygote64_32.rc' to import list
1246[    6.738554] init: Added '/init.bq.rc' to import list
1247[    6.744927] init: Parsing file /init.environ.rc...
1248[    6.750039] init: Parsing file /init.usb.rc...
1249[    6.754805] init: Parsing file /init.qcom.rc...
1250[    6.758435] init: Unable to open '/init.qcom.rc': No such file or directory
1251[    6.762901] init: /init.rc: 9: Could not import file '/init.qcom.rc': No such file or directory
1252[    6.771199] init: Parsing file /vendor/etc/init/hw/init.qcom.rc...
1253[    6.779728] init: Added '/vendor/etc/init/hw/init.qcom.usb.rc' to import list
1254[    6.784776] init: Added '/vendor/etc/init/hw/init.msm.usb.configfs.rc' to import list
1255[    6.791964] init: Added '/vendor/etc/init/hw/init.target.rc' to import list
1256[    6.799755] init: Added '/vendor/etc/init/hw/init.qcom.factory.rc' to import list
1257[    6.806538] init: Added '/vendor/etc/init/hw/init.qcom.test.rc' to import list
1258[    6.814183] init: Added '/vendor/etc/init/hw/init.lct.factory.rc' to import list
1259[    6.821720] init: /vendor/etc/init/hw/init.qcom.rc: 611: user requires 1 argument
1260[    6.829511] init: Parsing file /vendor/etc/init/hw/init.qcom.usb.rc...
1261[    6.840180] init: Parsing file /vendor/etc/init/hw/init.msm.usb.configfs.rc...
1262[    6.844922] init: Parsing file /vendor/etc/init/hw/init.target.rc...
1263[    6.850600] init: Added 'init.bq.target.rc' to import list
1264[    6.856542] init: /vendor/etc/init/hw/init.target.rc: 192: ignored duplicate definition of service 'time_daemon'
1265[    6.861888] init: Parsing file init.bq.target.rc...
1266[    6.872596] init: Added 'init.bq.common.rc' to import list
1267[    6.876574] init: Added 'init.lct.factory.rc' to import list
1268[    6.882169] init: Parsing file init.bq.common.rc...
1269[    6.887954] init: Unable to open 'init.bq.common.rc': No such file or directory
1270[    6.892564] init: /init.rc: 1: Could not import file 'init.bq.common.rc': No such file or directory
1271[    6.899853] init: Parsing file init.lct.factory.rc...
1272[    6.908891] init: Unable to open 'init.lct.factory.rc': No such file or directory
1273[    6.914098] init: /init.rc: 2: Could not import file 'init.lct.factory.rc': No such file or directory
1274[    6.921578] init: Parsing file /vendor/etc/init/hw/init.qcom.factory.rc...
1275[    6.931392] init: Added 'init.bq.factory.rc' to import list
1276[    6.937569] init: Parsing file init.bq.factory.rc...
1277[    6.943017] init: Unable to open 'init.bq.factory.rc': No such file or directory
1278[    6.948197] init: /init.rc: 28: Could not import file 'init.bq.factory.rc': No such file or directory
1279[    6.955616] init: Parsing file /vendor/etc/init/hw/init.qcom.test.rc...
1280[    6.965346] init: Parsing file /vendor/etc/init/hw/init.lct.factory.rc...
1281[    6.971148] init: Unable to open '/vendor/etc/init/hw/init.lct.factory.rc': No such file or directory
1282[    6.978062] init: /init.rc: 33: Could not import file '/vendor/etc/init/hw/init.lct.factory.rc': No such file or directory
1283[    6.987304] init: Parsing file /init.usb.configfs.rc...
1284[    6.999173] init: Parsing file /init.zygote64_32.rc...
1285[    7.003974] init: Parsing file /init.bq.rc...
1286[    7.008521] init: Unable to open '/init.bq.rc': No such file or directory
1287[    7.012990] init: /init.rc: 13: Could not import file '/init.bq.rc': No such file or directory
1288[    7.019752] init: Parsing directory /system/etc/init...
1289[    7.028886] init: Parsing file /system/etc/init/android.hidl.allocator@1.0-service.rc...
1290[    7.033994] init: Parsing file /system/etc/init/atrace.rc...
1291[    7.042578] init: Parsing file /system/etc/init/atrace_userdebug.rc...
1292[    7.047948] init: Parsing file /system/etc/init/audioserver.rc...
1293[    7.054314] init: Parsing file /system/etc/init/bootanim.rc...
1294[    7.060416] init: Parsing file /system/etc/init/bootstat.rc...
1295[    7.066230] init: Parsing file /system/etc/init/cameraserver.rc...
1296[    7.072007] init: Parsing file /system/etc/init/dpmd.rc...
1297[    7.078131] init: Parsing file /system/etc/init/drmserver.rc...
1298[    7.083632] init: Parsing file /system/etc/init/dumpstate.rc...
1299[    7.089411] init: Parsing file /system/etc/init/gatekeeperd.rc...
1300[    7.095348] init: Parsing file /system/etc/init/hwservicemanager.rc...
1301[    7.101612] init: Parsing file /system/etc/init/init-debug.rc...
1302[    7.107978] init: Parsing file /system/etc/init/init.qti.fm.rc...
1303[    7.114178] init: Parsing file /system/etc/init/installd.rc...
1304[    7.120266] init: Parsing file /system/etc/init/keystore.rc...
1305[    7.125927] init: Parsing file /system/etc/init/lmkd.rc...
1306[    7.131720] init: Parsing file /system/etc/init/logcatd.rc...
1307[    7.137188] init: Parsing file /system/etc/init/logd.rc...
1308[    7.143031] init: Parsing file /system/etc/init/logtagd.rc...
1309[    7.148343] init: Parsing file /system/etc/init/mdnsd.rc...
1310[    7.154210] init: Parsing file /system/etc/init/mediadrmserver.rc...
1311[    7.159540] init: Parsing file /system/etc/init/mediaextractor.rc...
1312[    7.166179] init: Parsing file /system/etc/init/mediametrics.rc...
1313[    7.172518] init: Parsing file /system/etc/init/mediaserver.rc...
1314[    7.178475] init: Parsing file /system/etc/init/mtpd.rc...
1315[    7.184679] init: Parsing file /system/etc/init/netd.rc...
1316[    7.190017] init: Parsing file /system/etc/init/perfprofd.rc...
1317[    7.195520] init: Parsing file /system/etc/init/racoon.rc...
1318[    7.201320] init: Parsing file /system/etc/init/recovery-persist.rc...
1319[    7.207195] init: Parsing file /system/etc/init/recovery-refresh.rc...
1320[    7.213568] init: Parsing file /system/etc/init/servicemanager.rc...
1321[    7.220059] init: Parsing file /system/etc/init/storaged.rc...
1322[    7.226607] init: Parsing file /system/etc/init/surfaceflinger.rc...
1323[    7.232254] init: Parsing file /system/etc/init/thermalservice.rc...
1324[    7.238704] init: Parsing file /system/etc/init/tombstoned.rc...
1325[    7.245094] init: Parsing file /system/etc/init/uncrypt.rc...
1326[    7.251048] init: Parsing file /system/etc/init/update_engine.rc...
1327[    7.256681] init: Parsing file /system/etc/init/update_verifier.rc...
1328[    7.262804] init: Parsing file /system/etc/init/vdc.rc...
1329[    7.269344] init: Parsing file /system/etc/init/vold.rc...
1330[    7.274778] init: Parsing file /system/etc/init/webview_zygote32.rc...
1331[    7.280122] init: Parsing file /system/etc/init/webview_zygote64.rc...
1332[    7.286671] init: Parsing file /system/etc/init/wfdservice.rc...
1333[    7.293188] init: Parsing file /system/etc/init/wifi-events.rc...
1334[    7.299343] init: Parsing file /system/etc/init/wificond.rc...
1335[    7.305348] init: Parsing directory /vendor/etc/init...
1336[    7.310492] init: Parsing file /vendor/etc/init/android.hardware.audio@2.0-service.rc...
1337[    7.316242] init: Parsing file /vendor/etc/init/android.hardware.biometrics.fingerprint@2.1-service.rc...
1338[    7.324502] init: Parsing file /vendor/etc/init/android.hardware.bluetooth@1.0-service-qti.rc...
1339[    7.333963] init: Parsing file /vendor/etc/init/android.hardware.boot@1.0-service.rc...
1340[    7.342825] init: Parsing file /vendor/etc/init/android.hardware.camera.provider@2.4-service.rc...
1341[    7.350510] init: Parsing file /vendor/etc/init/android.hardware.cas@1.0-service.rc...
1342[    7.359558] init: Parsing file /vendor/etc/init/android.hardware.configstore@1.0-service.rc...
1343[    7.367455] init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.rc...
1344[    7.376057] init: Parsing file /vendor/etc/init/android.hardware.gatekeeper@1.0-service-qti.rc...
1345[    7.383951] init: Parsing file /vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc...
1346[    7.392901] init: Parsing file /vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc...
1347[    7.402104] init: Parsing file /vendor/etc/init/android.hardware.health@1.0-service.rc...
1348[    7.411256] init: Parsing file /vendor/etc/init/android.hardware.keymaster@3.0-service-qti.rc...
1349[    7.419327] init: Parsing file /vendor/etc/init/android.hardware.light@2.0-service.rc...
1350[    7.428212] init: Parsing file /vendor/etc/init/android.hardware.media.omx@1.0-service.rc...
1351[    7.436309] init: Parsing file /vendor/etc/init/android.hardware.memtrack@1.0-service.rc...
1352[    7.444713] init: Parsing file /vendor/etc/init/android.hardware.power@1.0-service.rc...
1353[    7.452791] init: Parsing file /vendor/etc/init/android.hardware.sensors@1.0-service.rc...
1354[    7.461085] init: Parsing file /vendor/etc/init/android.hardware.thermal@1.0-service.rc...
1355[    7.469150] init: Parsing file /vendor/etc/init/android.hardware.usb@1.0-service.rc...
1356[    7.477440] init: Parsing file /vendor/etc/init/android.hardware.vibrator@1.0-service.rc...
1357[    7.485338] init: Parsing file /vendor/etc/init/android.hardware.wifi@1.0-service.rc...
1358[    7.493592] init: Parsing file /vendor/etc/init/com.qualcomm.qti.wifidisplayhal@1.0-service.rc...
1359[    7.501586] init: Parsing file /vendor/etc/init/hostapd.android.rc...
1360[    7.510580] init: Parsing file /vendor/etc/init/init.bq.common.rc...
1361[    7.517022] init: Added 'init.bq.device.rc' to import list
1362[    7.522881] init: Added 'init.bq.usb.rc' to import list
1363[    7.528137] init: Added 'init.bq.usb.configfs.rc' to import list
1364[    7.533433] init: /vendor/etc/init/init.bq.common.rc: 164: invalid keyword 'disable'
1365[    7.539522] init: /vendor/etc/init/init.bq.common.rc: 169: invalid keyword 'disable'
1366[    7.547283] init: Parsing file init.bq.device.rc...
1367[    7.555568] init: Parsing file init.bq.usb.rc...
1368[    7.559565] init: Unable to open 'init.bq.usb.rc': No such file or directory
1369[    7.564460] init: /init.rc: 2: Could not import file 'init.bq.usb.rc': No such file or directory
1370[    7.571482] init: Parsing file init.bq.usb.configfs.rc...
1371[    7.580226] init: Unable to open 'init.bq.usb.configfs.rc': No such file or directory
1372[    7.585533] init: /init.rc: 3: Could not import file 'init.bq.usb.configfs.rc': No such file or directory
1373[    7.593354] init: Parsing file /vendor/etc/init/init.bq.factory.rc...
1374[    7.603461] init: Parsing file /vendor/etc/init/init.bq.rc...
1375[    7.610042] init: /vendor/etc/init/init.bq.rc: 119: invalid keyword 'disable'
1376[    7.615133] init: Parsing file /vendor/etc/init/init.bq.usb.configfs.rc...
1377[    7.623047] init: Parsing file /vendor/etc/init/init.bq.usb.rc...
1378[    7.629654] init: Parsing file /vendor/etc/init/init.lct.factory.rc...
1379[    7.635690] init: /vendor/etc/init/init.lct.factory.rc: 5: ignored duplicate definition of service 'ptt_socket_app'
1380[    7.641582] init: /vendor/etc/init/init.lct.factory.rc: 27: invalid keyword 'disable'
1381[    7.648948] smblib_handle_typec_removal  is_ptn36502_safe_mode=0
1382[    7.648955] i2c 2-001a: set_ptn36502_safe_state_mode: ------- set_ptn36502_safe_state_mode start------
1383[    7.648958] i2c 2-001a: ptn36502_init: ------- ptn36502_init start------
1384[    7.649110] i2c-msm-v2 c176000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1a MSTR_STS:0x0d1300c8 OPER:0x00000090
1385[    7.649130] i2c 2-001a: ptn36502_i2c_write_reg: ------- ptn36502_i2c_write_reg  fail------
1386[    7.649133] i2c 2-001a: ptn36502_init:DEVICE_CONTROL write fail.
1387[    7.649136] i2c 2-001a: set_ptn36502_safe_state_mode: ------- set_ptn36502_safe_state_mode end------
1388[    7.649137] smblib_handle_typec_removal 11 is_ptn36502_safe_mode=1
1389[    7.649426] PMI: smblib_update_usb_type: Is not float charging
1390[    7.649488] usbpd usbpd0: USB Type-C disconnect
1391[    7.652471] msm-dwc3 a800000.ssusb: DWC3 in low power mode
1392[    7.737174] init: Parsing file /vendor/etc/init/rild.rc...
1393[    7.743387] init: Parsing file /vendor/etc/init/vendor.display.color@1.0-service.rc...
1394[    7.748760] init: Parsing file /vendor/etc/init/vendor.qti.esepowermanager@1.0-service.rc...
1395[    7.756722] init: Parsing file /vendor/etc/init/vendor.qti.gnss@1.0-service.rc...
1396[    7.765314] init: Parsing file /vendor/etc/init/vendor.qti.hardware.alarm@1.0-service.rc...
1397[    7.772691] init: Parsing file /vendor/etc/init/vendor.qti.hardware.factory@1.0-service.rc...
1398[    7.780842] init: Parsing file /vendor/etc/init/vendor.qti.hardware.perf@1.0-service.rc...
1399[    7.789489] init: Parsing file /vendor/etc/init/vendor.qti.hardware.qdutils_disp@1.0-service-qti.rc...
1400[    7.797697] init: Parsing file /vendor/etc/init/vendor.qti.hardware.qteeconnector@1.0-service.rc...
1401[    7.806978] init: Parsing file /vendor/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc...
1402[    7.815937] init: Parsing file /vendor/etc/init/vndservicemanager.rc...
1403[    7.824966] init: Parsing file /odm/etc/init...
1404[    7.830884] init: Unable to open '/odm/etc/init': No such file or directory
1405[    7.835404] init: processing action (early-init) from (/init.rc:15)
1406[    7.844180] init: starting service 'ueventd'...
1407[    7.848858] cgroup: init (1) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
1408[    7.851127] ueventd: ueventd started!
1409[    7.851209] ueventd: Parsing file /ueventd.rc...
1410[    7.856270] ueventd: Parsing file /vendor/ueventd.rc...
1411[    7.857820] ueventd: Parsing file /odm/ueventd.rc...
1412[    7.857837] ueventd: Unable to open '/odm/ueventd.rc': No such file or directory
1413[    7.857911] ueventd: Parsing file /ueventd.qcom.rc...
1414[    7.857925] ueventd: Unable to open '/ueventd.qcom.rc': No such file or directory
1415[    7.861853] selinux: SELinux: Loaded file_contexts
1416[    7.861853] 
1417[    7.875945] FG: fg_get_time_to_full_locked: battery profile is not loaded
1418[    7.912324] cgroup: "memory" requires setting use_hierarchy to 1 on the root
1419[    7.919489] init: Command 'start ueventd' action=early-init (/init.rc:43) returned 0 took 75ms.
1420[    7.926408] init: processing action (early-init) from (/vendor/etc/init/hw/init.qcom.rc:35)
1421[    7.935015] init: processing action (early-init) from (/vendor/etc/init/hw/init.target.rc:30)
1422[    7.943435] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
1423[    7.947582] selinux: SELinux: Loaded file_contexts
1424[    7.947582] 
1425[    7.956872] selinux: SELinux: Loaded file_contexts
1426[    7.956872] 
1427[    7.957161] selinux: SELinux: Loaded file_contexts
1428[    7.957161] 
1429[    7.957293] selinux: SELinux: Loaded file_contexts
1430[    7.957293] 
1431[    7.961708] selinux: SELinux: Loaded file_contexts
1432[    7.961708] 
1433[    7.963268] selinux: SELinux: Loaded file_contexts
1434[    7.963268] 
1435[    7.966413] selinux: SELinux: Loaded file_contexts
1436[    7.966413] 
1437[    7.977771] selinux: SELinux: Loaded file_contexts
1438[    7.977771] 
1439[    7.979730] selinux: SELinux: Loaded file_contexts
1440[    7.979730] 
1441[    8.821548] ueventd: Coldboot took 0.959 seconds
1442[    8.826029] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 816ms.
1443[    8.826149] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
1444[    8.837118] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
1445[    8.844610] init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
1446[    8.851161] init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
1447[    8.858553] init: processing action (keychord_init) from (<Builtin Action>:0)
1448[    8.865988] init: could not open /dev/keychord: No such file or directory
1449[    8.873083] init: processing action (console_init) from (<Builtin Action>:0)
1450[    8.879871] init: processing action (init) from (/init.rc:45)
1451[    8.887097] init: Unable to open '/default.prop': Too many symbolic links encountered
1452[    8.893937] Trying to create more than 5 SchedTune boosting groups
1453[    8.902911] init: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
1454[    8.906497] init: Unable to open '/proc/cpu/alignment': No such file or directory
1455[    8.919527] Registered swp emulation handler
1456[    8.923352] init: Unable to open '/sys/class/leds/vibrator/trigger': No such file or directory
1457[    8.927583] init: processing action (init) from (/init.environ.rc:2)
1458[    8.936050] init: processing action (init) from (/vendor/etc/init/hw/init.qcom.rc:41)
1459[    8.945871] init: Unable to open '/sys/fs/cgroup/memory/bg/memory.swappiness': No such file or directory
1460[    8.950246] init: Unable to open '/sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate': No such file or directory
1461[    8.959829] init: processing action (init) from (/vendor/etc/init/hw/init.target.rc:35)
1462[    8.970389] init: Unable to open '/dev/stune/system-background/schedtune.colocate': No such file or directory
1463[    8.978231] init: processing action (init) from (/vendor/etc/init/hw/init.target.rc:66)
1464[    8.988319] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
1465[    8.996427] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
1466[    9.004450] init: processing action (late-init) from (/init.rc:282)
1467[    9.010775] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
1468[    9.017041] init: processing action (fs) from (/vendor/etc/init/hw/init.target.rc:44)
1469[    9.026284] init: [libfs_mgr]Warning: unknown flag crashcheck
1470[    9.034504] init: [libfs_mgr]Invalid ext4 magic:0xbd33 on '/dev/block/bootdevice/by-name/userdata'
1471[    9.038744] init: [libfs_mgr]mount_with_alternatives(): skipping mount, invalid ext4, mountpoint=/data rec[1].fs_type=ext4
1472[    9.048372] init: [libfs_mgr]fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type ext4
1473[    9.064759] init: [libfs_mgr]__mount(source=/dev/block/bootdevice/by-name/modem_a,target=/firmware,type=vfat)=0: Success
1474[    9.073634] init: [libfs_mgr]__mount(source=/dev/block/bootdevice/by-name/bluetooth_a,target=/bt_firmware,type=vfat)=0: Success
1475[    9.083330] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/bootdevice/by-name/dsp_a
1476[    9.097450] EXT4-fs (mmcblk0p31): mounted filesystem with ordered data mode. Opts: barrier=1
1477[    9.102919] init: [libfs_mgr]__mount(source=/dev/block/bootdevice/by-name/dsp_a,target=/dsp,type=ext4)=0: Success
1478[    9.111675] init: Parsing file /odm/etc/init...
1479[    9.121430] init: Unable to open '/odm/etc/init': No such file or directory
1480[    9.125778] init: Command 'mount_all /vendor/etc/fstab.qcom' action=fs (/vendor/etc/init/hw/init.target.rc:47) returned 2 took 100ms.
1481[    9.132818] init: [libfs_mgr]Warning: unknown flag crashcheck
1482[    9.148842] EXT4-fs (mmcblk0p51): warning: maximal mount count reached, running e2fsck is recommended
1483[    9.151012] EXT4-fs (mmcblk0p51): mounted filesystem with ordered data mode. Opts: barrier=1
1484[    9.161071] selinux: SELinux: Skipping restorecon_recursive(/persist)
1485[    9.161071] 
1486[    9.168335] adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP fw
1487[    9.176201] init: processing action (fs) from (/system/etc/init/logd.rc:18)
1488[    9.176538] ueventd: firmware: loading 'adsp.mdt' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.mdt'
1489[    9.186900] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.mdt took 10ms
1490[    9.201516] subsys-pil-tz 15700000.qcom,lpass: adsp: loading from 0x0000000092a00000 to 0x0000000094800000
1491[    9.201799] init: processing action (fs) from (/system/etc/init/wifi-events.rc:17)
1492[    9.201861] init: processing action (post-fs) from (/init.rc:317)
1493[    9.204118] init: Couldn't load property file: Unable to open '/vendor/package/Default/system/vendor/vendor.prop': No such file or directory: No such file or directory
1494[    9.204140] init: Couldn't load property file: Unable to open '/vendor/package/Default/system/vendor/vendor.prop': No such file or directory: No such file or directory
1495[    9.204814] init: Couldn't load property file: Unable to open '/vendor/package/vendor.prop': No such file or directory: No such file or directory
1496[    9.204853] init: Couldn't load property file: Unable to open '/system/vendor/vendor.prop': No such file or directory: No such file or directory
1497[    9.205096] init: Couldn't load property file: Unable to open '/vendor/package/Default/system/vendor/vendor.prop': No such file or directory: No such file or directory
1498[    9.205455] init: Couldn't load property file: Unable to open '/vendor/package/power.prop': No such file or directory: No such file or directory
1499[    9.205465] init: Couldn't load property file: Unable to open '/vendor/package/vendor.prop': No such file or directory: No such file or directory
1500[    9.205474] init: Couldn't load property file: Unable to open '/system/vendor/vendor.prop': No such file or directory: No such file or directory
1501[    9.205492] init: Couldn't load property file: Unable to open '/vendor/package/Default/system/vendor/vendor.prop': No such file or directory: No such file or directory
1502[    9.205545] init: property_set("ro.regionalization.support", "true") failed: property already set
1503[    9.205554] init: Couldn't load property file: Unable to open '/vendor/package/power.prop': No such file or directory: No such file or directory
1504[    9.205564] init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
1505[    9.206122] init: property_set("ro.vendor.audio.sdk.fluencetype", "none") failed: property already set
1506[    9.206253] init: property_set("ro.vendor.sensors.facing", "false") failed: property already set
1507[    9.206260] init: property_set("ro.vendor.sensors.cmc", "false") failed: property already set
1508[    9.206267] init: property_set("ro.vendor.sdk.sensors.gestures", "false") failed: property already set
1509[    9.206287] init: Couldn't load property file: Unable to open '/factory/factory.prop': No such file or directory: No such file or directory
1510[    9.206613] init: [libfs_mgr]Warning: unknown flag crashcheck
1511[    9.206719] init: /recovery not specified in fstab
1512[    9.215706] init: starting service 'logd'...
1513[    9.216758] init: Created socket '/dev/socket/logd', mode 666, user 1036, group 1036
1514[    9.216904] init: starting service 'servicemanager'...
1515[    9.217074] init: Created socket '/dev/socket/logdr', mode 666, user 1036, group 1036
1516[    9.217352] init: Created socket '/dev/socket/logdw', mode 222, user 1036, group 1036
1517[    9.217428] init: Opened file '/proc/kmsg', flags 0
1518[    9.217452] init: Opened file '/dev/kmsg', flags 1
1519[    9.217464] init: starting service 'hwservicemanager'...
1520[    9.229435] init: starting service 'vndservicemanager'...
1521[    9.229960] EXT4-fs (dm-0): re-mounted. Opts: (null)
1522[    9.256074] init: processing action (post-fs) from (/vendor/etc/init/hw/init.qcom.rc:56)
1523[    9.256104] init: processing action (post-fs) from (/vendor/etc/init/hw/init.target.rc:61)
1524[    9.256225] init: starting service 'qseecomd'...
1525[    9.256929] init: starting service 'exec 1 (/vendor/bin/init.qti.qseecomd.sh)'...
1526[    9.257292] init: SVC_EXEC pid 576 (uid 1000 gid 1000+0 context default) started; waiting...
1527[    9.319906] logd.auditd: start
1528[    9.319920] logd.klogd: 9309158016
1529[    9.353447] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
1530[    9.358265] binder: 573:573 ioctl 620a 0 returned -22
1531[    9.570172] ueventd: firmware: loading 'adsp.b02' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b02'
1532[    9.571352] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b02 took 1ms
1533[    9.572034] ueventd: firmware: loading 'adsp.b03' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b03'
1534[    9.574742] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b03 took 2ms
1535[    9.575156] ueventd: firmware: loading 'adsp.b04' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b04'
1536[    9.597752] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b04 took 22ms
1537[    9.599096] ueventd: firmware: loading 'adsp.b05' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b05'
1538[    9.615032] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b05 took 16ms
1539[    9.624407] ueventd: firmware: loading 'adsp.b06' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b06'
1540[    9.625276] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b06 took 0ms
1541[    9.625636] ueventd: firmware: loading 'adsp.b07' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b07'
1542[    9.627028] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b07 took 1ms
1543[    9.627365] ueventd: firmware: loading 'adsp.b08' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b08'
1544[    9.629181] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b08 took 1ms
1545[    9.629531] ueventd: firmware: loading 'adsp.b09' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b09'
1546[    9.630526] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b09 took 1ms
1547[    9.630903] ueventd: firmware: loading 'adsp.b10' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b10'
1548[    9.635653] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b10 took 4ms
1549[    9.636744] ueventd: firmware: loading 'adsp.b11' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b11'
1550[    9.637536] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b11 took 0ms
1551[    9.637838] ueventd: firmware: loading 'adsp.b12' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b12'
1552[    9.653207] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b12 took 15ms
1553[    9.654299] ueventd: firmware: loading 'adsp.b13' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b13'
1554[    9.655641] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b13 took 1ms
1555[    9.664794] ueventd: firmware: loading 'adsp.b14' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b14'
1556[    9.667918] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b14 took 2ms
1557[    9.668300] ueventd: firmware: loading 'adsp.b15' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b15'
1558[    9.670317] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b15 took 1ms
1559[    9.670680] ueventd: firmware: loading 'adsp.b16' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b16'
1560[    9.674603] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b16 took 3ms
1561[    9.674971] ueventd: firmware: loading 'adsp.b17' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b17'
1562[    9.679314] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b17 took 4ms
1563[    9.681081] ueventd: firmware: loading 'adsp.b18' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b18'
1564[    9.697377] init: Service 'exec 1 (/vendor/bin/init.qti.qseecomd.sh)' (pid 576) exited with status 0 waiting took 0.440000 seconds
1565[    9.697507] init: Unable to write to '/dev/ipa': Invalid argument
1566[    9.697525] init: processing action (post-fs) from (/system/etc/init/atrace.rc:3)
1567[    9.697699] type=1400 audit(619461.399:3): avc: granted { open } for pid=1 comm="init" path="/dev/ipa" dev="tmpfs" ino=18557 scontext=u:r:init:s0 tcontext=u:object_r:ipa_dev:s0 tclass=chr_file
1568[    9.699000] init: Unable to open '/sys/kernel/tracing/tracing_on': No such file or directory
1569[    9.699051] init: processing action (post-fs) from (/system/etc/init/atrace_userdebug.rc:6)
1570[    9.699439] init: processing action (post-fs) from (/system/etc/init/recovery-refresh.rc:1)
1571[    9.699656] init: starting service 'exec 2 (/system/bin/recovery-refresh)'...
1572[    9.700127] init: SVC_EXEC pid 617 (uid 1000 gid 1007+0 context default) started; waiting...
1573[    9.711878] init: Service 'exec 2 (/system/bin/recovery-refresh)' (pid 617) killed by signal 126 waiting took 0.012000 seconds
1574[    9.712114] init: processing action (late-fs) from (/init.rc:377)
1575[    9.712972] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b18 took 31ms
1576[    9.713093] init: starting service 'boot-hal-1-0'...
1577[    9.713420] ueventd: firmware: loading 'adsp.b19' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b19'
1578[    9.714005] init: starting service 'gatekeeper-1-0'...
1579[    9.714910] init: starting service 'keymaster-3-0'...
1580[    9.715762] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b19 took 2ms
1581[    9.715790] init: processing action (post-fs-data) from (/init.rc:385)
1582[    9.716860] init: starting service 'vold'...
1583[    9.718020] init: Created socket '/dev/socket/vold', mode 660, user 0, group 1009
1584[    9.718334] init: Created socket '/dev/socket/cryptd', mode 660, user 0, group 1009
1585[    9.719295] init: Unable to open '/data/system/entropy.dat': No such file or directory
1586[    9.720610] init: Unable to open '/data/misc/recovery/ro.build.fingerprint': No such file or directory
1587[    9.722376] init: Unable to open '/data/misc/recovery/proc/version': No such file or directory
1588[    9.732791] init: starting service 'exec 3 (/system/bin/vdc --wait cryptfs init_user0)'...
1589[    9.733330] init: SVC_EXEC pid 624 (uid 0 gid 0+0 context default) started; waiting...
1590[    9.751138] ueventd: firmware: loading 'adsp.b20' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b20'
1591[    9.752277] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b20 took 1ms
1592[    9.752726] ueventd: firmware: loading 'adsp.b21' for '/devices/soc/15700000.qcom,lpass/firmware/adsp.b21'
1593[    9.754056] ueventd: loading /devices/soc/15700000.qcom,lpass/firmware/adsp.b21 took 1ms
1594[    9.787548] smblib_handle_typec_insertion val.intval = 1 
1595[    9.787550] smblib_handle_typec_insertion is_ptn36502_safe_mode = 1 
1596[    9.787558] i2c 2-001a: set_ptn36502_usp_3p0_only_mode: ------- set_ptn36502_usp_3p0_only_mode start------
1597[    9.787732] i2c-msm-v2 c176000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1a MSTR_STS:0x0d1300c8 OPER:0x00000090
1598[    9.787755] i2c 2-001a: ptn36502_i2c_write_reg: ------- ptn36502_i2c_write_reg  fail------
1599[    9.787758] i2c 2-001a: set_ptn36502_usp_3p0_only_mode:MODE_CONTROL_1 write fail.
1600[    9.787760] i2c 2-001a: set_ptn36502_usp_3p0_only_mode: ------- set_ptn36502_usp_3p0_only_mode end------
1601[    9.792130] init: Service 'exec 3 (/system/bin/vdc --wait cryptfs init_user0)' (pid 624) exited with status 0 waiting took 0.059000 seconds
1602[    9.799389] init: starting service 'exec 4 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)'...
1603[    9.799940] init: SVC_EXEC pid 630 (uid 1000 gid 1000+0 context default) started; waiting...
1604[    9.815756] selinux: SELinux: Loaded file_contexts
1605[    9.815756] 
1606[    9.825953] init: Service 'exec 4 (/system/bin/tzdatacheck /system/usr/share/zoneinfo /data/misc/zoneinfo)' (pid 630) exited with status 0 waiting took 0.026000 seconds
1607[    9.826034] init: processing action (post-fs-data) from (/init.usb.rc:6)
1608[    9.826654] init: processing action (post-fs-data) from (/vendor/etc/init/hw/init.qcom.rc:223)
1609[    9.835386] init: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory
1610[    9.835593] init: processing action (post-fs-data) from (/vendor/etc/init/hw/init.target.rc:69)
1611[    9.836580] init: processing action (post-fs-data) from (/vendor/etc/init/hw/init.qcom.factory.rc:56)
1612[    9.836626] init: processing action (post-fs-data) from (/vendor/etc/init/hw/init.qcom.test.rc:29)
1613[    9.836756] init: processing action (post-fs-data) from (/system/etc/init/bootstat.rc:3)
1614[    9.837158] init: processing action (post-fs-data) from (/system/etc/init/logtagd.rc:4)
1615[    9.837561] init: processing action (post-fs-data) from (/system/etc/init/recovery-persist.rc:1)
1616[    9.837897] init: starting service 'exec 5 (/system/bin/recovery-persist)'...
1617[    9.838403] init: SVC_EXEC pid 631 (uid 1000 gid 1007+0 context default) started; waiting...
1618[    9.849375] init: Service 'exec 5 (/system/bin/recovery-persist)' (pid 631) exited with status 0 waiting took 0.011000 seconds
1619[    9.849451] init: processing action (post-fs-data) from (/vendor/etc/init/hostapd.android.rc:9)
1620[    9.849797] init: processing action (post-fs-data) from (/vendor/etc/init/init.bq.factory.rc:7)
1621[    9.849961] init: starting service 'initusb'...
1622[    9.850493] init: processing action (post-fs-data) from (/vendor/etc/init/init.bq.rc:29)
1623[    9.850946] init: processing action (load_persist_props_action) from (/init.rc:272)
1624[    9.850968] init: Couldn't load property file: Unable to open '/data/local.prop': No such file or directory: No such file or directory
1625[    9.851104] init: starting service 'logd-reinit'...
1626[    9.851650] init: processing action (load_persist_props_action) from (/system/etc/init/logcatd.rc:31)
1627[    9.851714] init: processing action (firmware_mounts_complete) from (/init.rc:278)
1628[    9.851767] init: processing action (early-boot) from (/vendor/etc/init/hw/init.qcom.rc:59)
1629[    9.851819] adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP fw
1630[    9.851859] cdsp-loader soc:qcom,msm-cdsp-loader: cdsp_loader_do: scheduling work to load CDSP fw
1631[    9.852040] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: scheduling work to load SLPI fw
1632[    9.852055] can't get fw name.
1633[    9.852057] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: SLPI image loading failed
1634[    9.852206] init: starting service 'exec 6 (/vendor/bin/init.qcom.early_boot.sh)'...
1635[    9.852702] init: SVC_EXEC pid 634 (uid 0 gid 0+0 context u:r:qti_init_shell:s0) started; waiting...
1636[    9.862644] logd.daemon: reinit
1637[    9.863282] init: Service 'logd-reinit' (pid 633) exited with status 0
1638[    9.895167] subsys-pil-tz 15700000.qcom,lpass: adsp: Brought out of reset
1639[    9.905283] type=1400 audit(619461.399:3): avc: granted { open } for pid=1 comm="init" path="/dev/ipa" dev="tmpfs" ino=18557 scontext=u:r:init:s0 tcontext=u:object_r:ipa_dev:s0 tclass=chr_file
1640[    9.905292] type=1400 audit(619461.609:4): avc: denied { read } for pid=632 comm="sh" name="cache" dev="dm-0" ino=15 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:cache_file:s0 tclass=lnk_file permissive=1
1641[    9.911955] apr_tal_link_state_cb: edge[lpass] link state[0]
1642[    9.913953] subsys-pil-tz 15700000.qcom,lpass: adsp: Power/Clock ready interrupt received
1643[    9.913955] subsys-pil-tz 15700000.qcom,lpass: Subsystem error monitoring/handling services are up
1644[    9.945892] init: Service 'initusb' (pid 632) exited with status 0
1645[    9.956050] ueventd: firmware: loading 'cdsp.mdt' for '/devices/soc/1a300000.qcom,turing/firmware/cdsp.mdt'
1646[    9.957847] ueventd: firmware: could not find firmware for cdsp.mdt
1647[    9.957904] ueventd: loading /devices/soc/1a300000.qcom,turing/firmware/cdsp.mdt took 1ms
1648[    9.957959] subsys-pil-tz 1a300000.qcom,turing: cdsp: Failed to locate cdsp.mdt(rc:-11)
1649[    9.957978] cdsp-loader soc:qcom,msm-cdsp-loader: cdsp_load_fw: pil get failed,
1650[    9.957980] cdsp-loader soc:qcom,msm-cdsp-loader: cdsp_load_fw: CDSP image loading failed
1651[   10.089609] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
1652[   10.101141] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
1653[   10.101147] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
1654[   10.101420] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
1655[   10.118155] sps:BAM 0x0000000015204000 (va:0x0000000000000000) enabled: ver:0x19, number of pipes:13
1656[   10.120171] sps:BAM 0x0000000015204000 is registered.
1657[   10.120171] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1658[   10.133421] apr_tal_notify_state: Channel state[0]
1659[   10.134366] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1660[   10.146530] swr-wcd msm_sdw_swr_ctrl: swrm_get_logical_dev_num: device id 0x1021170213 does not match with 0x20170211
1661[   10.146533] swr_get_logical_dev_num: Error -22 to get logical addr for device 20170211
1662[   10.146580] wsa881x: probe of wsa881x.20170211 failed with error -22
1663[   10.152806] swr-wcd msm_sdw_swr_ctrl: swrm_get_logical_dev_num: device id 0x0 does not match with 0x20170212
1664[   10.152807] swr_get_logical_dev_num: Error -22 to get logical addr for device 20170212
1665[   10.152851] wsa881x: probe of wsa881x.20170212 failed with error -22
1666[   10.159467] sdm660-asoc-snd soc:sound: msm_internal_init: default codec configured
1667[   10.168626] sdm660-asoc-snd soc:sound: msm_init_wsa_dev: found 2 wsa881x devices registered with ALSA core
1668[   10.170931] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: Error: regulator not found:cdc-vdd-spkdrv
1669[   10.171058] ------------[ cut here ]------------
1670[   10.171060] WARNING: at /var/lib/jenkins/workspace/android-o/kernel/msm-4.4/drivers/base/regmap/regcache.c:472
1671[   10.171062] Modules linked in:
1672[   10.171063] 
1673[   10.171066] CPU: 4 PID: 448 Comm: kworker/u16:5 Not tainted 4.4.78-perf+ #1
1674[   10.171067] Hardware name: Qualcomm Technologies, Inc. SDM 660 PM660 + PM660L MTP (DT)
1675[   10.171077] Workqueue: deferwq deferred_probe_work_func
1676[   10.171078] task: fffffff1b6558d80 ti: fffffff1b65d4000 task.ti: fffffff1b65d4000
1677[   10.171082] PC is at regcache_cache_only+0xe4/0xec
1678[   10.171084] LR is at regcache_cache_only+0x24/0xec
1679[   10.171085] pc : [<ffffff876ce19848>] lr : [<ffffff876ce19788>] pstate: 604001c5
1680[   10.171086] sp : fffffff1b65d78d0
1681[   10.171088] x29: fffffff1b65d78d0 x28: ffffff876ea3b220 
1682[   10.171089] x27: fffffff1b6426800 x26: fffffff1b5e09658 
1683[   10.171090] x25: ffffff876e9e465c x24: fffffff1b5e17918 
1684[   10.171092] x23: ffffff876e806000 x22: ffffff876e96b6b4 
1685[   10.171093] x21: 0000000000000001 x20: fffffff1b6f46818 
1686[   10.171094] x19: fffffff0c8f65400 x18: fffffff1b65d7c50 
1687[   10.171096] x17: 00000072484ed974 x16: ffffff876c8b312c 
1688[   10.171097] x15: 151d307472000000 x14: 0000000000000000 
1689[   10.171098] x13: 0000000000000000 x12: 0000000000000000 
1690[   10.171099] x11: 0000000000000000 x10: 0000000000000000 
1691[   10.171101] x9 : 6570795420485048 x8 : 0000000000000000 
1692[   10.171102] x7 : 000000020000004d x6 : fffffff1b65d7735 
1693[   10.171103] x5 : ffffff876ceb5cdc x4 : 0000000000000000 
1694[   10.171105] x3 : 0000000000000140 x2 : 0000000000000000 
1695[   10.171106] x1 : 00000000007e007e x0 : 0000000000000001 
1696[   10.171107] 
1697[   10.171107] PC: 0xffffff876ce19808:
1698[   10.171111] 9808  f9400680 2a1503e2 d63f0060 f8418e80 b5ffff40 17fffff3 f9400020 36080040
1699[   10.171115] 9828  94212ac6 f9401a61 f9401e60 d63f0020 f94013f5 a94153f3 a8c37bfd d65f03c0
1700[   10.171118] 9848  d4210000 17ffffd2 a9bd7bfd 910003fd a90153f3 f90013f5 aa0003f3 53001c35
1701[   10.171122] 9868  f9401401 f9401c00 d63f0020 34000075 3947b260 350005c0 b000e2a1 3907b675
1702[   10.171123] 
1703[   10.171123] LR: 0xffffff876ce19748:
1704[   10.171126] 9748  f9401e60 d63f0020 2a1403e0 a94153f3 a9425bf5 a8c37bfd d65f03c0 a9bd7bfd
1705[   10.171130] 9768  910003fd a90153f3 f90013f5 aa0003f3 53001c35 f9401401 f9401c00 d63f0020
1706[   10.171134] 9788  34000075 3947b660 350005c0 b000e2a1 3907b275 91332021 b9400820 6b1f001f
1707[   10.171137] 97a8  5400042d d5384102 b9402443 52800800 d0004f64 1ac00c60 f9453484 937d7c00
1708[   10.171138] 
1709[   10.171138] SP: 0xfffffff1b65d7890:
1710[   10.171142] 7890  6ce19788 ffffff87 b65d78d0 fffffff1 6ce19848 ffffff87 604001c5 00000000
1711[   10.171146] 78b0  b65d78d0 fffffff1 6ce19788 ffffff87 ffffffff ffffffff b6f46818 fffffff1
1712[   10.171149] 78d0  b65d7900 fffffff1 6d3ebd58 ffffff87 b5e17800 fffffff1 b6f46818 fffffff1
1713[   10.171153] 78f0  6d97b000 ffffff87 6d3ebd4c ffffff87 b65d7980 fffffff1 6d3967a4 ffffff87
1714[   10.171153] 
1715[   10.171154] ---[ end trace b2ea36a7177cf08a ]---
1716[   10.171155] Call trace:
1717[   10.171158] Exception stack(0xfffffff1b65d76e0 to 0xfffffff1b65d7810)
1718[   10.171160] 76e0: fffffff0c8f65400 0000008000000000 0000000082559000 ffffff876ce19848
1719[   10.171161] 7700: 00000000604001c5 ffffff876ea3b220 0000000000000001 ffffff876e806000
1720[   10.171163] 7720: 0000000000000000 0017000000000003 0000000000000180 a005c13c17eda359
1721[   10.171165] 7740: fffffff1b65d7790 ffffff876ce1d5bc 000000000000f1db 0000000000000001
1722[   10.171167] 7760: fffffff0c8f44102 0000000000000001 fffffff0c8f65000 0000000000000008
1723[   10.171169] 7780: 000000000000f1db ffffff876d366b20 fffffff1b65d77d0 a005c13c17eda359
1724[   10.171170] 77a0: 0000000000000001 00000000007e007e 0000000000000000 0000000000000140
1725[   10.171172] 77c0: 0000000000000000 ffffff876ceb5cdc fffffff1b65d7735 000000020000004d
1726[   10.171174] 77e0: 0000000000000000 6570795420485048 0000000000000000 0000000000000000
1727[   10.171175] 7800: 0000000000000000 0000000000000000
1728[   10.171177] [<ffffff876ce19848>] regcache_cache_only+0xe4/0xec
1729[   10.171182] [<ffffff876d3ebd58>] msm_anlg_cdc_soc_probe+0x2ac/0x5c4
1730[   10.171185] [<ffffff876d3967a4>] snd_soc_codec_drv_probe+0x18/0x20
1731[   10.171188] [<ffffff876d399384>] soc_probe_component+0x1dc/0x2c8
1732[   10.171190] [<ffffff876d39bd00>] snd_soc_register_card+0x7b8/0xe28
1733[   10.171193] [<ffffff876d3a82a4>] devm_snd_soc_register_card+0x4c/0x88
1734[   10.171197] [<ffffff876d45ed30>] msm_asoc_machine_probe+0x5d4/0xa94
1735[   10.171199] [<ffffff876cdfeafc>] platform_drv_probe+0x58/0xa4
1736[   10.171201] [<ffffff876cdfce1c>] driver_probe_device+0x118/0x2ac
1737[   10.171203] [<ffffff876cdfd0f8>] __device_attach_driver+0x88/0x98
1738[   10.171205] [<ffffff876cdfb1d8>] bus_for_each_drv+0x7c/0xac
1739[   10.171206] [<ffffff876cdfcc50>] __device_attach+0xa4/0x124
1740[   10.171207] [<ffffff876cdfd264>] device_initial_probe+0x10/0x18
1741[   10.171208] [<ffffff876cdfc260>] bus_probe_device+0x2c/0x8c
1742[   10.171210] [<ffffff876cdfc6dc>] deferred_probe_work_func+0x74/0xa0
1743[   10.171213] [<ffffff876c8ba790>] process_one_work+0�         R&)�S&�LSi�2�����������Ẳ��ᙙ�ł��Zѡɕ򡕅����™�z���ႂ�j��             R&)�S&ӦLNW�+O��������,'NӦLL��] ret_from_fork+0x10/0x50
1744[   10.197943] msm_digital_codec msm_digital_codec: ASoC: mux RX2 MIX1 INP3 has no paths
1745[   10.197971] msm_digital_codec msm_digital_codec: ASoC: mux RX3 MIX1 INP3 has no paths
1746[   10.198179] msm_digital_codec msm_digital_codec: ASoC: Failed to create AIF2 Capture debugfs file
1747[   10.296097] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux AUDIO_REF_EC_UL16 MUX has no paths
1748[   10.306838] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s5: ASoC: no source widget found for INT5_MI2S_RX
1749[   10.306841] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s5: ASoC: Failed to add route INT5_MI2S_RX -> direct -> INT5 MI2S Playback
1750[   10.306893] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s0: ASoC: no sink widget found for INT0_MI2S_TX
1751[   10.306895] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s0: ASoC: Failed to add route INT0 MI2S Capture -> direct -> I�[   10.306917] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s3: ASoC: Failed to addk
1752[   10.306957] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s2: ASoC: no source widget found for INT2_MI2S_RX
1753[   10.306959] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s2: ASoC: Failed to add route INT2_MI2S_RX -> direct -> INT2 MI2S Playback
1754[   10.310943] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s4: ASoC: no sink widget found for INT4_MI2S_TX
1755[   10.310946] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-int-mi2s4: ASoC: Failed to add route INT4 MI2S Capture -> direct -> INT4_MI2S_TX
1756[   10.328572] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: ASoC: unknown pin DMIC1
1757[   10.328583] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: ASoC: unknown pin DMIC2
1758[   10.328594] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: ASoC: unknown pin DMIC3
1759[   10.328605] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:analog-codec@f000: ASoC: unknown pin DMIC4
1760[   10.529609] PMI: smblib_update_usb_type: Is not float charging
1761[   11.012286] init: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory
1762[   11.016173] init: couldn't write 760 to /dev/cpuset/camera-daemon/tasks: No such file or directory
1763[   11.030402] init: cannot find '/system/vendor/bin/esepmdaemon', disabling 'esepmdaemon': No such file or directory
1764[   11.033216] init: Failed to bind socket 'pdx/system/vr/display/client': No such file or directory
1765[   11.033511] init: Failed to bind socket 'pdx/system/vr/display/manager': No such file or directory
1766[   11.036330] init: sanitize_path: Failed to locate path /dev/block/bootdevice/by-name/ramdump: No such file or directory
1767[   11.036333] init: 
1768zangyapro:/ $ [   11.036339] init: do_chown: sanitize_path failed for path /dev/block/bootdevice/by-name/ramdumpprefix: /dev/block/
1769[   11.036341] init: 
1770[   11.036357] init: sanitize_path: Failed to locate path /dev/block/bootdevice/by-name/ramdump: No such file or directory
1771[   11.036359] init: 
1772[   11.036364] init: do_chmod: failed for /dev/block/bootdevice/by-name/ramdump..prefix(/dev/block/) match err 
1773[   11.036366] init: 
1774[   11.036677] init: Failed to bind socket 'pdx/system/vr/display/vsync': No such file or directory
1775[   11.060102] rmt_storage:INFO:main: Done with init now waiting for messages!
1776[   11.165576] init: insmod: open("/vendor/lib/modules/msm_11ad_proxy.ko") failed: No such file or directory
1777[   11.165980] init: Unable to open '/sys/class/android_usb/android0/iSerial': No such file or directory
1778[   11.184839] healthd_msm: Error in opening batt_info.txt, fd=-1
1779[   11.184850] healthd_msm: Couldn't create file, fd=-1 errno=Permission denied
1780[   11.184958] healthd_msm: Not notifying BMS
1781[   11.186077] healthd: Unknown power supply type 'BMS'
1782[   11.186201] healthd: Unknown power supply type 'Main'
1783[   11.186236] healthd: Unknown power supply type 'Parallel'
1784[   11.186457] healthd: BatteryFullChargePath not found
1785[   11.186461] healthd: BatteryCycleCountPath not found
1786[   11.187439] healthd_msm: Error in opening batt_info.txt, fd=-1
1787[   11.253109] servloc: service_locator_recv_msg: Error receiving message rc:-42. Retrying...
1788[   11.261277] servloc: service_locator_recv_msg: Error receiving message rc:-42. Retrying...
1789[   11.270217] init: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
1790[   11.271185] init: do_start: Service rfs_access not found
1791[   11.292855] init: setpgid failed for console: Operation not permitted
1792[   11.336069] mdss_dp_notify_clients: Invalid request NOTIFY_UNKNOWN --> NOTIFY_DISCONNECT
1793[   11.393578] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
1794[   11.524272] wlan: Loading driver v5.1.1.28U (2018-02-26T12:55:38Z)
1795[   11.558694] ipa ipa2_uc_state_check:301 uC is not loaded
1796[   11.558719] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
1797[   11.575133] firmware msadp: firmware_loading_store: map pages failed
1798[   11.575740] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
1799[   11.637258] msm_sensor_driver_probe camera eeprom_name=s5k2l8_ofilm_ogc0870
1800[   11.638830] msm_sensor_driver_probe slave_info->sensor_name =s5k2l8_ofilm_zangyapro
1801[   11.638838] dtsi eeprom_name[0]=, module_id=0
1802[   11.638841] dtsi eeprom_name[1]=, module_id=0
1803[   11.638843] dtsi eeprom_name[2]=, module_id=0
1804[   11.638844] dtsi eeprom_name[3]=s5k4h7yx_ofilm_off0812, module_id=0
1805[   11.638845] dtsi eeprom_name[4]=s5k4h7yx_holitech_elq8909m, module_id=16
1806[   11.638846] dtsi eeprom_name[5]=, module_id=0
1807[   11.638847] dtsi eeprom_name[6]=, module_id=0
1808[   11.638848] dtsi eeprom_name[7]=, module_id=0
1809[   11.638848] dtsi eeprom_name[8]=, module_id=0
1810[   11.638849] dtsi eeprom_name[9]=, module_id=0
1811[   11.638850] module not found!probe break!eeprom_name=s5k2l8_ofilm_ogc0870 sensor_name=s5k2l8_ofilm_zangyapro
1812[   11.638856] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 msm_sensor_driver_cmd failed (non-fatal) rc -14
1813[   11.638858] MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:146 msm_sensor_init_subdev_do_ioctl:146 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
1814[   11.643667] msm_sensor_driver_probe camera eeprom_name=imx350_ofilm_olc0871
1815[   11.643669] msm_sensor_driver_probe slave_info->sensor_name =imx350_ofilm_zangyapro
1816[   11.643670] dtsi eeprom_name[0]=, module_id=0
1817[   11.643672] dtsi eeprom_name[1]=, module_id=0
1818[   11.643672] dtsi eeprom_name[2]=, module_id=0
1819[   11.643673] dtsi eeprom_name[3]=s5k4h7yx_ofilm_off0812, module_id=0
1820[   11.643674] dtsi eeprom_name[4]=s5k4h7yx_holitech_elq8909m, module_id=16
1821[   11.643675] dtsi eeprom_name[5]=, module_id=0
1822[   11.643676] dtsi eeprom_name[6]=, module_id=0
1823[   11.643677] dtsi eeprom_name[7]=, module_id=0
1824[   11.643677] dtsi eeprom_name[8]=, module_id=0
1825[   11.643678] dtsi eeprom_name[9]=, module_id=0
1826[   11.643679] module not found!probe break!eeprom_name=imx350_ofilm_olc0871 sensor_name=imx350_ofilm_zangyapro
1827[   11.643684] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 msm_sensor_driver_cmd failed (non-fatal) rc -14
1828[   11.643685] MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:146 msm_sensor_init_subdev_do_ioctl:146 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
1829[   11.646580] msm_sensor_driver_probe camera eeprom_name=s5k4h7yx_ofilm_off0812
1830[   11.646581] msm_sensor_driver_probe slave_info->sensor_name =s5k4h7yx_ofilm_zangya
1831[   11.646583] dtsi eeprom_name[0]=, module_id=0
1832[   11.646584] dtsi eeprom_name[1]=, module_id=0
1833[   11.646585] dtsi eeprom_name[2]=, module_id=0
1834[   11.646586] dtsi eeprom_name[3]=s5k4h7yx_ofilm_off0812, module_id=0
1835[   11.646588] dtsi eeprom_name[4]=s5k4h7yx_holitech_elq8909m, module_id=16
1836[   11.646589] dtsi eeprom_name[5]=, module_id=0
1837[   11.646590] dtsi eeprom_name[6]=, module_id=0
1838[   11.646590] dtsi eeprom_name[7]=, module_id=0
1839[   11.646591] dtsi eeprom_name[8]=, module_id=0
1840[   11.646592] dtsi eeprom_name[9]=, module_id=0
1841[   11.646593] module not found!probe break!eeprom_name=s5k4h7yx_ofilm_off0812 sensor_name=s5k4h7yx_ofilm_zangya
1842[   11.646596] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 msm_sensor_driver_cmd failed (non-fatal) rc -14
1843[   11.646598] MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:146 msm_sensor_init_subdev_do_ioctl:146 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
1844[   11.649580] msm_sensor_driver_probe camera eeprom_name=s5k4h7yx_holitech_elq8909m
1845[   11.649581] msm_sensor_driver_probe slave_info->sensor_name =s5k4h7yx_holitech_zangya
1846[   11.649583] dtsi eeprom_name[0]=, module_id=0
1847[   11.649585] dtsi eeprom_name[1]=, module_id=0
1848[   11.649586] dtsi eeprom_name[2]=, module_id=0
1849[   11.649587] dtsi eeprom_name[3]=s5k4h7yx_ofilm_off0812, module_id=0
1850[   11.649588] dtsi eeprom_name[4]=s5k4h7yx_holitech_elq8909m, module_id=16
1851[   11.649589] module found!probe continue!eeprom_name=s5k4h7yx_holitech_elq8909m
1852[   11.736037] s5k4h7yx_holitech_zangya probe succeeded
1853[   11.736037] msm_sensor_init_device_name 796
1854[   11.741761] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
1855[   11.774389] msm_eeprom_config32:1524 Eeprom already probed at kernel boot
1856[   11.835069] MSM-CPP cpp_init_hardware:1152 stream_cnt:0
1857[   11.893490] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1858[   11.896508] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1859[   11.896573] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1860[   11.896634] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1861[   11.896635] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1862[   11.896694] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1863[   11.896695] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1864[   11.896755] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1865[   11.896814] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1866[   11.896873] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1867[   11.896874] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1868[   11.896938] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1869[   11.896938] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1870[   11.896998] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1871[   11.897059] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1872[   11.897119] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1873[   11.897120] msm_audio_sound_focus_get: Could not get copp idx for port_id=4149
1874[   11.897181] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1875[   11.897182] msm_audio_source_tracking_get: Could not get copp idx for port_id=4149
1876[   11.897827] msm-ext-disp-audio-codec-rx soc:qcom,msm_ext_disp:qcom,msm-ext-disp-audio-codec-rx: msm_ext_disp_audio_type_get: codec_data, get_audio_edid_blk() or get_intf_id is NULL
1877[   11.900330] msm_dai_q6_slim_rx_drift_get: afe port not started. dai_data->status_mask = 0
1878[   11.900511] msm_dai_q6_ext_disp_drift_get:  afe port not started. status_mask = 0
1879[   11.900919] msm_pcm_volume_ctl_get substream runtime not found
1880[   11.901043] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1881[   11.901432] msm_pcm_volume_ctl_get substream runtime not found
1882[   11.901557] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1883[   11.901872] msm_pcm_volume_ctl_get substream runtime not found
1884[   11.901993] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1885[   11.902125] msm_compr_audio_effects_config_get: stream or effects inactive
1886[   11.902247] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1887[   11.903155] msm_pcm_volume_ctl_get substream runtime not found
1888[   11.903279] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1889[   11.903480] msm_compr_audio_effects_config_get: stream or effects inactive
1890[   11.903607] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1891[   11.904251] msm_compr_audio_effects_config_get: stream or effects inactive
1892[   11.904375] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1893[   11.905016] msm_pcm_volume_ctl_get substream runtime not found
1894[   11.906156] msm_pcm_volume_ctl_get substream runtime not found
1895[   11.906291] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1896[   11.906430] msm_compr_audio_effects_config_get: stream or effects inactive
1897[   11.906559] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1898[   11.907227] msm_compr_audio_effects_config_get: stream or effects inactive
1899[   11.907357] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1900[   11.908037] msm_compr_audio_effects_config_get: stream or effects inactive
1901[   11.908173] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1902[   11.908865] msm_compr_audio_effects_config_get: stream or effects inactive
1903[   11.909000] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1904[   11.909687] msm_compr_audio_effects_config_get: stream or effects inactive
1905[   11.909824] msm_adsp_stream_callback_get: ASM Stream PP event queue is not initialized.
1906[   11.910530] msm_pcm_volume_ctl_get substream runtime not found
1907[   11.910845] msm_pcm_volume_ctl_get substream or runtime not found
1908[   12.035011] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
1909[   12.039137] MSM-CPP cpp_init_hardware:1152 stream_cnt:0
1910[   12.178032] PMI: set_sdp_current: ICL 75000uA isn't supported for SDP
1911[   12.178034] PMI: smblib_set_icl_current: Couldn't set SDP ICL rc=-22
1912[   12.433050] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
1913[   12.440892] MSM-CPP cpp_init_hardware:1152 stream_cnt:0
1914[   12.977632] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
1915[   13.225422] QSEECOM: qseecom_create_key: Set the key successfully
1916[   13.226994] mdss_mdp_cxipeak_vote: cxipeak api fail ret:-22 set_vote :0 new_rate:171428571 prev_rate:412500000
1917[   13.373940] resize: Couldn't find valid filesystem superblock.
1918[   13.373969] resize: Failed to get resize status of /dev/block/bootdevice/by-name/userdata.
1919[   13.378672] resize: Resize ext4 return -1
1920[   13.389179] EXT4-fs (dm-1): Ignoring removed nomblk_io_submit option
1921[   13.603422] init: property_set("ro.boottime.initusb", "13592325515") failed: property already set
1922[   13.606839] init: Couldn't load property file: Unable to open '/data/local.prop': No such file or directory: No such file or directory
1923[   13.675686] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs1!
1924[   13.676186] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs2!
1925[   13.684081] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsg!
1926[   13.692577] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsc!
1927[   13.702064] rmt_storage:INFO:rmt_storage_alloc_buff_cb: Received req_size: 0! avail: 2097152
1928[   13.708814] init: property_set("ro.persistent_properties.ready", "true") failed: property already set
1929[   13.712529] init: property_set("ro.boottime.logd-reinit", "13701418640") failed: property already set
1930[   13.727782] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs1
1931[   13.736447] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs1!
1932[   13.760394] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs1!
1933[   13.761334] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs2
1934[   13.768785] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs2!
1935[   13.902581] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs2!
1936[   13.904321] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs1
1937[   13.911038] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=1024, size=2096128]for /boot/modem_fs1!
1938[   14.771883] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 2096128) for /boot/modem_fs1!
1939[   14.904343] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
1940[   14.904420] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 0
1941[   14.914171] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 0
1942[   14.920866] ipa-wan handle_indication_req:135 not send indication
1943[   14.922773] ipa ipa_uc_response_hdlr:461 IPA uC loaded
1944[   14.923153] ipa ipa_uc_wdi_event_log_info_handler:328 WDI stats ofst=0x45138
1945[   14.923161] ipa ipa_uc_ntn_event_log_info_handler:36 NTN feature missing 0x9
1946[   14.971495] IPC_RTR: process_new_server_msg: Server 00001002 create rejected, version = 0
1947[   15.265259] PMI: smblib_update_usb_type: Is not float charging
1948[   16.205282] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1949[   16.205323] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1950[   16.213425] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1951[   16.213428] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1952[   16.213431] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1953[   16.213468] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1954[   16.213470] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1955[   16.240846] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1956[   17.431362] [0] return:0x9e status:0x9d
1957[   17.431381] [1] return:0x80 status:0x0
1958[   17.433989] [2] return:0x73 status:0x0
1959[   17.437807] [3] return:0x4 status:0x0
1960[   17.446432] mdss_dsi_gen_read_status: Read back value from panel is incorrect
1961[   17.451089] mdss_fb_report_panel_dead: Panel has gone bad, sending uevent - PANEL_ALIVE=0
1962[   17.583101] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1963[   17.583105] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1964[   17.583691] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1965[   17.583694] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1966[   17.585606] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1967[   17.585610] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1968[   17.585929] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1969[   17.585931] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1970[   17.586522] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1971[   17.586525] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1972[   18.532599] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1973[   18.532629] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1974[   18.593551] IPC_RTR: msm_ipc_router_send_to: Remote port not found
1975[   18.593583] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -19
1976[   22.905427] init: cannot find '/vendor/bin/chre', disabling 'chre': No such file or directory
1977[   22.960631] ipa ipa2_teardown_sys_pipe:1519 bad parm.
1978[   22.960654] ipa-wan ipa_wwan_remove:2235 Failed to teardown IPA->APPS pipe
1979[   22.964885] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
1980[   22.987948] [0] return:0x9d status:0x9d
1981[   22.987968] [1] return:0x80 status:0x0
1982[   22.990578] [2] return:0x73 status:0x0
1983[   22.994431] [3] return:0x4 status:0x0
1984[   23.030911] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
1985[   23.030996] ipa-wan ipa_del_dflt_wan_rt_tables:391 Deleting Route hdl:(0x9) with ip type: 0
1986[   23.038893] ipa-wan ipa_del_dflt_wan_rt_tables:400 Deleting Route hdl:(0xb) with ip type: 1
1987[   23.153760] init: Failed to kill process cgroup uid 1000 pid 790 in 216ms, 1 processes remain
1988[   23.244968] msm_flash_subdev_ioctl:865 fctrl->func_tbl NULL
1989[   23.245013] msm_csiphy_release csiphy dev NULL / ref_count ZERO
1990[   23.249343] msm_csiphy_release csiphy dev NULL / ref_count ZERO
1991[   23.255437] msm_csiphy_release csiphy dev NULL / ref_count ZERO
1992[   23.261394] msm_csid_release: csid invalid state 1
1993[   23.267106] msm_csid_release: csid invalid state 1
1994[   23.272136] msm_csid_release: csid invalid state 1
1995[   23.276876] msm_csid_release: csid invalid state 1
1996[   23.281475] msm_cci_release invalid ref count 0 / cci state 1
1997[   23.286301] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:119 default
1998[   23.286301] 
1999[   23.292312] MSM-CPP msm_cpp_subdev_ioctl:3538 shutdown cpp node. open cnt:0
2000[   23.400800] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Write iovec request received for /boot/modem_fs2
2001[   23.400935] rmt_storage:INFO:rmt_storage_client_thread: Calling Write [offset=0, size=2097152]for /boot/modem_fs2!
2002[   23.446925] rmt_storage:INFO:rmt_storage_client_thread: Done Write (bytes = 2097152) for /boot/modem_fs2!
2003[   23.452347] qti_ctrl_queue_notify: rmnet ctrl file handler 0000000000000000 is not openconfigfs-gadget gadget: unbind function 'diag'/0000000000000000
2004[   23.463386] configfs-gadget gadget: unbind function 'cser'/0000000000000000
2005[   23.469132] configfs-gadget gadget: unbind function 'rmnet'/0000000000000000
2006[   23.475863] configfs-gadget gadget: unbind function 'Function FS Gadget'/0000000000000000
2007[   23.505864] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
2008[   23.530935] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
2009[   23.533464] <CORE> smem:mpss glink_open: Error 0 - unable to find transport
2010[   23.537095] <LBSRV> smem:mpss:LOOPBACK_CTL_APSS glink_lbsrv_open_worker: unable to open channel
2011[   23.538584] qmi_send_req_wait: Response Wait Error 92
2012[   23.538588] ipa-wan qmi_enable_force_clear_datapath_send:624 send req failed -102
2013[   23.538775] qmi_send_req_wait: Error encode & send req: -102
2014[   23.538777] ipa-wan qmi_disable_force_clear_datapath_send:670 send req failed -102
2015[   23.542016] smd_channel_reset: allocation table not initialized
2016[   23.542091] ipa ipa_uc_reset_pipe:742 Invalid IPA client
2017[   23.542347] ipa ipa_uc_reset_pipe:742 Invalid IPA client
2018[   23.542451] ipa ipa_uc_reset_pipe:742 Invalid IPA client
2019[   23.707505] init: powerctl_shutdown_time_ms:806:0
2020[   24.923083] reboot: Restarting system with command ''
2021[   24.923136] Going down for restart now